Table of Contents
Usage Notice
Precautions .......................................................................................................................... 1
Introduction
About PA1575R .................................................................................................................... 2
Package Overview .......................................................................................................3
Installation
Product Overview ................................................................................................................. 4
Start Your Installation............................................................................................................ 5
Kensington Security Slot....................................................................................................... 6
VESA Mount For Your Computer .......................................................................................... 7
Remove the Deskstand .................................................................................................... 8
User Controls
Side Panel Controls.............................................................................................................. 9
Initial Turn-On..................................................................................................................... 10
XP PRO Initial On Steps................................................................................................. 10
Test Devices ....................................................................................................................... 17
Testing the Touchscreen ................................................................................................. 17
Recovering the Operating System...................................................................................... 18
1.Using the Recovery CD ............................................................................................... 18
2.PA1575R Touchscreen Driver Install Instructions ........................................................ 26
Environmental Specifications.............................................................................................. 27
Touch Computer Specifications .......................................................................................... 28
Display Specifications......................................................................................................... 29
Power Supply Specifications .............................................................................................. 29
Appendix
Troubleshooting.................................................................................................................. 33
Product Dimensions............................................................................................................ 34
Compatibility Modes ........................................................................................................... 35
Product Registration and Technical Support .......................................................................36
Usage Notice
!
Warning - To prevent the risk of fire or shock hazards, do not expose
this product to rain or moisture.
Warning - Please do not open or disassemble the product as this may
cause electric shock.
!
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
• Turn off the product before cleaning.
• Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
• Use a soft cloth moistened with mild detergent to clean the display housing.
• Use only high quality and safety approved AC/DC adapter.
• Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
• Do not touch the LCD display screen surface with sharp or hard objects.
• Do not use abrasive cleaners, waxes or solvents for your cleaning.
• Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
1
Introduction
About PA1575R
The PA1575R Series is All-in-One Touch computer model, it has a 15" flat panel screen
with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). The TPC-152x
incorporates the Mobile Intel® Atom processor N270 at 1.6GHz, FSB533 and the Mobile Intel
945GSE Express Chipset with the ICH7M.
Features include:
• Intel Atom processor N270,1.6GHz, FSB 533MHz
• Onboard 10/100 BaseT and Gigabit LAN
• 7 ports, USB 2.0(Ext x 3, Int x 4)
• 2 x DB9 for COM1/COM2
• 1 x Digital displays(DVI-D)
• 1 x Line out
• 1 x 12V power jack
• 1024x768 XGA resolution
• 15" viewable display area
• Kensington security slot
• 75 mm VESA mount
• Touch function with USB interface
• Built-in speakers-1W x 2
Touch Screen for PA1575RXP
• Analog 5-wire resistive touch screen for finger and stylus input
• Surface: Anti-glare treatment
• Interface: USB controller
• Durability: 35 million touches at a single point
• Hardness of surface: 3H Typical
• Operating force: 40g~200g when using a silicon rubber tipped pen with a 1mm
diameter minimum and a hardness of 60 degree.
• Transmittance: 82%±5%
2
Package Overview
LCD Touch Computer
Power Cord
DC Power Supply
Recovery CD
Touch Screen Driver
Installation CD-ROM
Landing Strip
xxxxxxxxx /
xxxxxxxxx
xxxxxxxxx
USER’S GUIDE
www
.planartouch.com
User's Guide
3
Installation
Product Overview
• Front View
• Button View (Without Stand)
AUDIO
RS-232
USB
DC IN
RJ-45
DVI
4
Start Your Installation
Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the LCD so that
you can hookup the cables to associated connector.
Figure A
1. Remove the stand back cover by pulling in the direction of the arrow.
2. Connect applicable cables to the appropriate connectors.
3. Re-attach the stand back cover by pressing firmly until the tabs snap into place. You
may also keep the cables in order by using the cable organizer.
!
Note!
You can place the LCD flat horizontally to make it
easier to connect the cables. Please make sure
that you place it on an even surface lest the LCD
should be damaged by scratches or collision.
included cables organizer
5
Kensington Security Slot
The computer can be secured to your desk or any other fixed object with Kensington lock
security products. The Kensington lock is not included.
6
VESA Mount For Your Computer
This computer conforms to the VESA Flat Panel Mounting Physical Mounting Interface
Standard which defines a physical mounting interface for flat panel computers, and
corresponding with the standard mounting devices of flat panel computer, such as wall and
table arms. The VESA mounting interface is located on the back of touch computer.
To mount the computer on a swing arm or other mounting fixture, follow the instructions
included with the mounting fixture to be used, please note to mount touch computer to the
devices (either mounting fixture or swing arm) what conforms to the UL listed.
75.0 mm
Slots ( x 4)
VESA
Mounting
Interface
!
Warning!
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4 screws diameter with proper length to mount your
monitor.
Please note: the mounting stand must be able to support at least 11 lbs ( 5Kg).
7
Remove the Deskstand
1.
Remove stand back cover.
2.
Remove hinge cover.
3.
Remove 4 screws and then
remove hinge.
8
User Controls
Side Panel Controls
Icon
Key Name
Menu
Up
Down
Enter
Power
OSD
Menu off status
Key
Menu on status
Menu appear
Brightness
Mute
Menu disappear / return to main item
Main item select up / Adjust up
Main item select down / Adjust down
Enter/Select sub-item function
Power On/Off
9
Initial Turn-On
The initial setup of the operating system takes approximately 5-10 minutes. Additional
time may be needed depending on touch computer hardware configuration and connected
devices. To setup the Windows OS for the touch computer, turn on the touch computer and
follow the instructions on the screen.
XP PRO Initial On Steps
Step 1. Boot Computer
▎
▼
▎
▼
10
Step 2. Press "Next"
Step 3. Read agreement and press " I accept this agreement" and
"Next".
11
Step 4. Language Selection, Press "Next"
Click Customize. The Regional and Language window shown below will appear.
Step 5. Type your full name, organization and press "Next"
12
Step 6. Type product key and press "Next"
Please find the "Certificate of Authenticity" license label on the back-cover.
13
Step 7. Setup your computer name, administrator password and
press "Next"
Step 8. Date and Time Settings, Setup your computer date and
time and press "Next"
14
Step 9. Choose typical or custom setting and press "Next"
Step 10. Choose applicable option
▎
▼
15
Step 11. Press "Finish"
Step 12. Finish and launch windows system
16
Test Devices
The touch computer can be pre-installed with several different hardware options. To test an
optional device that is installed on the touch computer, follow the instructions below.
NOTE: Testing icons are located on the desktop. Testing of a particular device can only be
done after the device is properly installed.
Testing the Touchscreen
The touchscreen is pre-calibrated for accurate touch response.
Calibration* If for any reason the touchscreen needs to be re-calibrated, double-click the Touchscreen-test
icon. The window shown below will open.
17
Recovering the Operating System
If the touch computer’s operating system and software needs to be recovered, insert the
included recovery disk into an external DVD-ROM (sold separately) and reboot the touch
computer. Follow the on-screen instructions to complete recovery.
NOTE: All data will be deleted during the recovery process. User must back up files prior to
recovering the operating system.
1. Using the Recovery CD For XP Pro
To recover your pre-installed software using the recovery CD, do as follows:
From the Start menu, restart your computer.
Step 1.
Insert "Recovery CD" in CD-ROM to begin sequence.
Step 2.
Step 3.
Press any key to boot from CD
▎
▼
18
▎
▼
Press any key to continue
Step 4.
▎
▼
19
Press any key to continue
Step 5.
▎
▼
▎
▼
20
Press "Next"
Step 6.
Read agreement and press "I accept this agreement" and "Next".
Step 7.
21
Press "Next"
Step 8.
Type your full name, organization and press "Next"
Step 9.
22
Type product key and press "Next"
Step 10.
Please find the "Certificate of Authenticity" license label on the back-cover.
23
Setup your computer name, administrator password and press "Next"
Step 11.
Setup your computer date and time and press "Next"
Step 12.
Choose typical or custom setting and press "Next"
Step 13.
24
Choose applicable option
Step 14.
Press "Finish"
Step 15.
Finish and launch windows system
Step 16.
25
2. PA1575R Touchscreen Driver Install Instructions:
The touch driver is located on the enclosed CD-ROM for these operating systems:
Windows® XP
Insert the included Touchscreen disk into an external DVD-ROM (sold
separately)
Step 1.
Select the monitor size 15” and then model name PA1575R.
Step 2.
Click on the “Load Driver” button that appears to the right of the model name.
Step 3.
Step 4.
Follow the step-by-step instructions as shown on the pop-up windows.
26
Environmental Specifications
Temperature Ranges
Operating Temperature (Independent of altitude)
Non-Operating Temperature (Independent of altitude)
0oC to 35oC
-20oC to 60oC
Humidity
Operating (non-condensing)
20% to 80%
10% to 90%
Non-Operating (38.7oC maximum wet bulb temperature)
Altitude Ranges
0 to + 12,000 feet [3,658m].
Operating
Equivalent to 14.7 to 10.1 psia.
0 to + 40,000 feet [12,192m].
Non-Operating
Equivalent to 14.7 to 4.4 psia.
27
Touch Computer Specifications
Processor
RAM
Intel ATOM processor N270 w/533MHz FSB
2GB DDR2 RAM
Northbridge
Southbridge
Video
Intel 945GSE
Intel ICH7-M
Intel GMA 950
Operating systems
Microsoft Windows XP Professional Embedded
7 x USB 2.0 ports (Ext. x 3, Int x 4)
1 x 10/100 BaseT and Gigabit LAN
2 x Serial ports (DB9) COM1, COM2
1 x line-out 3.5mm
Ports
1 x DVI-D
12V Power Jack
BIOS
Intel BIOS Support ACPI SMBIOS
Replaceable lithium-ion battery for clock
Caution: Risk of Explosion if Battery is replaced
by an Incorrect Type. Dispose of Used Batteries
According to the Instructions.
Real Time clock
Storage
XP: SATA 2.5'' HDD 160GB (or above)
Type: External brick
Power supply
Input (line) voltage: 100-240 VAC, 50-60 Hz
Output voltage/current: 12 V at 4.16 amps
Operating: 0oC to 35oC
Storage: -20oC to 60oC
Temperature
Operating: 20%-80%
Storage: 10%-90%
noncondensing
Humidity Operating:
Actual: 17.2 lb (6.0 kg)
Weight
Shipping: 22.5 lb (8.93 kg)
Shipping box dimensions 465 x 375x 288
Backlight lamp life
Agency approvals
Speakers (internal)
Mounting options
Min 40,000 hours to half brightness
UL/cUL, FCC, CE, TUV, EN60950
1W speakers
75 mm VESA mount
28
Display Specifications
Model
PA1575RXP
LCD Display
Display Size
Pixel Pitch
Native
15" TFT Active Matrix Panel
304.1(H) x 228.1(V) mm
0.297(H) x 0.297(V) mm
XGA 1024 x 768
Display Color
Plug & Play
16.2 million color
DDC 2B
Power Supply Specifications
The touch computer shall be powered by 12VDC from a universal type power supply brick
with the following characteristics:
Input voltage
100 to 240 V~
50/60 Hz
Input frequency
Output voltage
12 V
Output line and load regulation
Output current
+/- 5%
4.1 Amps Rated
29
Removable base
Fanless
Other features
Touchscreen sealed to bezel and LCD
Security lock receptacle
Peripheral Options and Upgrades
May vary
Battery Notice Caution:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
COM1, COM2, Connector(RS232 Mode)
Pin #
Signal Name
Ground
DCD
shell
1
2
3
4
5
6
7
8
9
RXD
TXD
1
6
DTR
signal ground
DSR
RTS
CTS
RI
30
RJ45 LAN connector Pin Definition
Pin #
Signal Name
1
2
3
6
TD+
TD-
RD+
RD-
8
1
Power Input Pin Definition
Pin #
Signal Name
+12V
1
1
2
2
Ground
USB Pin Definition
Pin #
Signal Name
+5V
1 2 3 4
1
2
3
4
USB D-
USB D+
GND
31
DVI-D Pin Definition
Pin #
1
Signal Name
DATA 2-
2
DATA 2+
3
Shield 2/4
DATA 4-
4
5
DATA 4+
6
DDC CLOCK
DDC DATA
VSYNC
7
8
9
DATA 1-
1
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
DATA 1+
SHIELD 1/3
DATA 3-
9
17
24
DATA 3+
DDC POWER
A GROUND 1
HOT POWER
DATA 0-
DATA 0+
SHIELD 0/5
DATA 5-
DATA 5+
SHIELD CLK
CLOCK -
CLOCK +
32
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the problem
persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
► Check that all the I/O and power connectors are correctly and well connected
described in the "Installation" section.
► Make sure the pins of the connectors are not crooked or broken.
Problem: Partial Image or incorrectly displayed image.
► Check to see if the resolution of your computer is higher than that of the LCD
display.
► Reconfigure the resolution of your computer to make it less than or equal to
1024 x 768.
33
Product Dimensions
364.0 mm
► Front View
► Side View
69.0 mm
240.0 mm
► Top View
34
Compatibility Modes
Mode
VGA
Resolution
720 x 400
H-Frequency (KHz)
V-Frequency (Hz)
31.47
31.47
37.88
48.36
70
60
60
60
VGA
640 x 480
VESA
VESA
800 x 600
1024 x 768
35
Product Registration and Technical Support
Register Your Planar Products Today
Thank you for choosing Planar. To assure you receive all the benefits of your Planar product
and services, register your Planar product today. Visit our website to register your product at
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,
touch screen or other Planar products visit our online store at www.PlanarOnline.com or
Technical Support
touch screen drivers, warranty information and access to Planar’s Technical Library for online
troubleshooting.
To speak with Planar Customer Support please have you model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
36
Planar Systems, Inc.
Customer Service
1195 NW Compton Drive
Beaverton, OR 97006-1992
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the United States.
Hours: 24 hours a day, 7 days a week
© 2011 Planar Systems, Inc. 5/11 Planar is a registered trademark of Planar Systems, Inc.
Other brands and names are the property of their respective owners.
Technical information in this document is subject to change without notice.
020-1025-00D
820450085101
|
Philips Blu ray Player BDP5005 User Manual
Philips AQ 4010 User Manual
Pelco Camera Lens C2491M B User Manual
Nikon 1910 User Manual
Morphy Richards Cocktail blender User Manual
Miller Camera Support 1036 User Manual
Lochinvar SYNO 15 User Manual
Lightning Audio B4652TK User Manual
LG Electronics HBM 760 User Manual
Kenwood KRC 225 User Manual