Philips Car Stereo System CEM3000 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
CEM3000  
EN User manual  
The apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on  
the apparatus (e.g. liquid filled objects,  
lighted candles).  
1 Important  
Safety  
Read and understand all instructions  
before you use your apparatus. If damage  
is caused by failure to follow instructions,  
the warranty does not apply.  
Notice  
This apparatus is designed for negative  
ground (earth) 12 V DC operation only.  
To ensure safe driving, adjust the volume  
to a safe and comfortable level.  
Improper fuses can cause damage or  
fire. When you need to change the fuse,  
consult a professional.  
The making of unauthorized copies of  
copy-protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Use only the supplied mounting hardware  
for a safe and secure installation.  
To avoid short circuit, do not expose the  
apparatus, remote control or remote  
control batteries to rain or water.  
Never insert objects into the ventilation  
slots or other openings on the apparatus.  
Clean the apparatus and frame with a  
soft, damp cloth. Never use substances  
such as alcohol, chemicals or household  
cleaners on the apparatus.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
Never place any objects other than discs  
into the apparatus.  
Never use solvents such as benzene,  
thinner, cleaners available commercially,  
or anti-static sprays intended for discs.  
Visible and invisible laser radiation when  
open. Avoid exposure to beam.  
Risk of damage to the apparatus screen!  
Never touch, push, rub or strike the  
screen with any object.  
“Made for iPod” means that an electronic  
accessory has been designed to connect  
specifically to iPod and has been certified by  
the developer to meet Apple performance  
standards.  
“Works with iPhone” means that an electronic  
accessory has been designed to connect  
specifically to iPhone and has been certified  
by the developer to meet Apple performance  
standards.  
Caution  
Use of controls or adjustments or performance  
of procedures other than herein may result in  
hazardous radiation exposure or other unsafe  
operation.  
Apple is not responsible for the operation of  
this device or its compliance with safety and  
regulatory standards.  
iPod is a trademark of Apple Inc., registered in  
the U.S. and other countries.  
4
EN  
This apparatus includes this label:  
This product complies with the radio  
interference requirements of the European  
Community.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
2010 © Koninklijke Philips Electronics N.V.  
All rights reserved.  
Recycling  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
Specifications are subject to change without  
notice. Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products. The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal household  
waste.  
Please inform yourself about the local rules on  
separate collection of batteries. The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment  
and human health.  
EN  
5
c Front panel  
2 Your car audio  
system  
d Trim plate  
e Carrying case for front panel  
f Sleeve  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
g Rubber cushion  
h Screws x 4 pcs  
i ISO male connectors  
j Disassembly tools x 2 pcs  
k User manual  
Introduction  
l Quick start guide  
With the in-car audio system, you can enjoy  
your drive while listening to:  
a
b
FM or AM (MW) radio  
Audio from CD or MP3 disc  
Audio from USB devices  
Audio from SD/SDHC card  
Audio from iPod/iPhone  
Audio from other external devices  
The unit supports the following media format:  
c
f
d
e
h
g
i
k
l
What’s in the box  
Check and identify the contents of your  
package:  
j
a Main unit  
b Remote control  
6
EN  
Overview of the main unit  
a
b
c
d
e
f
g
p
o
n
m l  
k
j
i
h
s
r
q
a Full Sound  
d
/
Turn on or off Full Sound.  
Turn the unit on or off.  
Confirm selection.  
Mute or unmute sound.  
Rotate to adjust settings.  
b
Unlock the panel.  
c BAND/  
e
Select tuner band.  
Return to previous menu.  
Enter iPod/iPhone control mode.  
EN  
7
f
g
Overview of the remote  
control  
Eject disc.  
USB socket.  
i
j
h MP3 LINK  
Connect external audio device.  
i +SONG/FOLDER -  
h
k
l
Select preset radio station.  
Search for track/folder.  
Access manual store.  
g
f
e
j OPTIONS/CLOCK  
Access option menu.  
View clock.  
m
n
d
c
k
/
o
p
q
Tune for radio station.  
Skip/search for track.  
b
a
Fast forward/backward playback.  
r
l DISP/  
Display LCD color.  
Access search mode.  
m MENU/ZONE  
Access system menu.  
Access menu for switching the music  
listening zone.  
a PRESET +/-  
Select preset radio station.  
Access manual store.  
6281'  
n
b OPTIONS  
Turn on or off Maximizing volume  
Access option menu.  
o EQ AUDIO  
c
Select equalizer (EQ) setting.  
Access audio setting menu.  
Start play.  
Pause or resume play.  
p SOURCE  
d AUDIO  
Select audio source.  
Access audio setting menu.  
q RESET  
e
/
Restore default settings.  
Tune to a radio station  
Skip track.  
Fast backward/forward playback  
r SD card slot  
s Disc slot  
f OK  
Confirm selection.  
8
EN  
g MENU/ZONE  
3 Get started  
Access system menu.  
Access menu for switching the music  
listening zone.  
Caution  
h
/PWR/  
Turn the unit on or off.  
Mute or restore volume.  
Use the controls only as stated in this user  
manual.  
i VOLUME +/-  
Always follow the instructions in this chapter in  
sequence.  
Adjust volume.  
If you contact Philips, you will be asked for the  
model and serial number of your apparatus.The  
model number and serial number are on the  
bottom of your apparatus.Write the numbers  
here:  
Model No. __________________________  
Serial No. ___________________________  
j BAND/  
Select tuner band.  
Return to previous/top menu.  
k SOURCE  
Select audio source.  
l
m
Enter iPod/iPhone control mode.  
Select Maximizing volume setting.  
Select equalizer (EQ) setting.  
6281'  
Install the car audio  
n EQ  
Please refer to the “Installation guide” in Quick  
start guide.  
o Full Sound  
Turn on or off Full Sound.  
p SONG  
Attach the front panel  
1 Attach the trim plate.  
Search for track.  
q FOLDER  
Search for folder.  
r DISP/  
Display LCD color.  
Access Search mode.  
s CLOCK  
View clock.  
2 Insert the right side of the panel in the  
chassis until it is correctly engaged.  
EN  
9
3 Press the left side of the panel until the  
mechanism locks it into place.  
Install remote control battery  
Turn on  
1 Press to turn on the unit.  
Caution  
To turn off the unit, press for over  
Risk of explosion! Keep batteries away from  
heat, sunshine or fire. Never discard batteries  
in fire.  
3 seconds.  
Risk of decreased battery life! Never mix  
different brands or types of batteries.  
Risk of product damage! When the remote  
control is not used for long periods, remove  
the batteries.  
Select country/region  
Perchlorate Material - special handling may  
perchlorate.  
Note  
Select correct country/region for this unit,  
otherwise the unit can not work properly.  
For first-time use:  
1 Remove the protective tab to activate the  
1 Press to turn on the unit.  
» [SELECT OPERATING REGION] is  
displayed.  
remote control battery.  
To replace the remote control battery:  
1 Open the battery compartment.  
2 Rotate to select an option:  
[USA] (United States)  
[Latin] (Latin America)  
[Europe] (Western Europe)  
[ASIA] (Asia Pacific)  
2 Insert one CR2025 battery with correct  
polarity (+/-) as indicated.  
3 Close the battery compartment.  
[Mid-East ] (Middle East)  
[Russia] (Russia)  
3 Press to confirm.  
10 EN  
Set clock  
4 Listen to radio  
1 Press MENU.  
2 Press  
/
repeatedly until [CLK SET]  
Tune to a radio station  
displays.  
3 Rotate encoder clockwise to set hour.  
1 Press SOURCE repeatedly to select radio  
4 Press to confirm.  
mode.  
5 Rotate encoder anti-clockwise to set  
2 Press BAND/ to select band: [FM1],  
minute.  
[FM2], [FM3], [AW1] or [AW2] .  
6 Press to confirm.  
3 Press  
or  
to tune to a radio station  
manually.  
» The radio station is broadcast.  
» To search for a radio station  
View clock  
automatically, press  
3 seconds.  
or  
for over  
1 Press and hold OPTIONS repeatedly  
until the clock is displayed.  
Select tuner region  
You can select suitable country/region of the  
radio.  
1 Press SOURCE to select Radio mode.  
2 Press MENU.  
3 Press  
/
repeatedly until [AREA]  
displays.  
4 Rotate to select:  
[USA]  
[LATIN]  
[Europe]  
[ASIA]  
[M-EAST]  
[RUSSIA]  
Select tuner sensitivity  
To receive more radio stations or only stations  
with strong signal, you can adjust the tuner  
sensitivity.  
1 Press OPTIONS repeatedly to select  
[LOCAL SEEK].  
EN 11  
2 Rotate to select a setting:  
Tune to a preset station  
[LOCAL SEEK ON]: Only stations  
with strong signal can be broadcast.  
[LOCAL SEEK OFF]: Stations with  
strong and weak signals can be  
broadcast.  
1 Press BAND/ to select band.  
2 Press +/PRESET or -/RRESET to select  
the preset station.  
Store radio stations in  
memory  
You can store up to 6 stations in each band.  
Store stations automatically  
1 Press OPTIONS repeatedly until  
[AUTO-STORE] displays.  
2 Press to confirm.  
» The six strongest stations of the  
selected band are saved in preset  
channel automatically.  
Store stations manually  
1 Tune to a station that you want to store.  
2 Press and hold +/PRESET or -/RRESET to  
enter storing mode.  
» The preset number on LCD screen  
blinks..  
3 Press +/PRESET or -/RRESET to select  
storing location.  
4 Press to confirm.  
» The station is saved in the selected  
channel.  
» The preset number on LCD screen  
lights up and remains on.  
12 EN  
Play from USB  
5 Play audio files  
Note  
Note  
Ensure that the USB device contains playable  
music.  
Ensure that the disc or device contains playable  
files.  
Insert the USB device  
1 Slide the USB socket cover marked  
Play a disc  
to the left.  
2 Insert the USB device into the USB socket.  
» The unit starts playing from the USB  
device automatically.  
Note  
You cannot play CDs encoded with copyright  
protection technologies.  
You can play commercially available audio CDs  
and these discs:  
CD-Recordables (CD-R)  
CD-Re-writables (CD-RW)  
MP3 CDs  
WMA CDs  
Note  
Ensure that the disc contains playable content.  
1 Insert a CD with the printed side facing up.  
» Play starts automatically.  
To pause CD play, press  
.
To resume CD play, press again.  
To skip to the previous/next track, press  
or  
.
To search backward/forward rapidly  
within the current track, press  
for 3 seconds.  
or  
Remove the USB device  
1 Press to turn off the unit.  
Remove the CD  
To take out the CD, press on the front panel.  
2 Remove the USB device.  
Tip  
If the disc is blocked in the disc compartment,  
press and hold until the disc comes out.  
EN 13  
Insert a card  
Play from iPod/iPhone  
You can enjoy audio from iPod/iPhone through  
this unit.  
Note  
This unit supports SD and SDHC cards.  
Compatible iPod/iPhone  
1 Press to release the panel.  
Apple iPod and iPhone models with a 30-pin  
dock connector:  
Made for.  
2 Push the left side of the panel rightward,  
then pull the panel towards you to  
disengage it from the chassis.  
iPod nano (2nd generation)  
iPod nano (3rd generation 4GB)  
iPod nano (3rd generation 8GB)  
iPod nano (4th generation)  
iPod nano (5th generation)  
iPod classic (1st generation)  
iPod classic (2nd generation)  
iPod touch (1st generation)  
iPod touch (2nd generation)  
iPod touch (3rd generation)  
iPod video (30GB & 80GB)  
Works with.  
3 Insert the card into the card slot.  
» The unit starts playing from the card  
automatically.  
iPhone  
iPhone 3G  
iPhone 3GS  
Connect iPod/iPhone  
Remove the card  
1 Slide the USB socket cover marked  
1 Press to turn off the unit.  
to the left.  
2 Press the card until you hear a click sound.  
2 Insert USB adaptor on one end of iPod/  
iPhone cable to the USB socket on the  
main unit.  
3 Insert the other end of the iPod/iPhone  
cable to the iPod/iPhone socket.  
» The unit starts playing from the USB  
device automatically.  
» The card is now disengaged.  
3 Remove the card.  
14 EN  
Search for an MP3/WMA track  
1 Press SOURCE repeatedly to select iPod  
mode.  
2 Press BAND/ to browse iPod/iPhone  
menu.  
3 Rotate to select the Artist search  
mode, and press to confirm.  
4 Press DISP/ to search alphabetically.  
5 Rotate to select desired artist, then  
press to confirm.  
6 Rotate to select desired song in  
current album.  
7 Press to start play.  
Note  
Control music playback on iPod/  
iPhone  
User cannot control the music via iPod/iPhone  
under audio control mode.  
1 Ensure that the iPod/iPhone is connected  
correctly.  
2 Press SOURCE to select iPod USB mode.  
Search for an MP3/WMA  
track on iPod/iPhone  
3 Press repeatedly to toggle between the  
two control modes:  
iPod control mode: Use the buttons/  
touch screen on iPod/iPhone to  
control the music.  
Audio control mode: Use the  
control buttons on car audio to  
control the music.  
Search within the current folder  
1 Press +SONG.  
» The name of the current track displays.  
2 Rotate to select another track in  
current folder  
To control playback under audio control  
mode:  
3 Press to confirm.  
Search in other folder  
To pause/resume play, press  
To skip to a track, press  
To search during play, press and  
hold , then release to resume  
normal play.  
To navigate the menu, press  
.
1 Press FOLDER -.  
/
.
» The name of the current folder displays.  
/
2 Rotate to navigate through all folders.  
3 Press to access the selected folder.  
4 Rotate to select a track in the folder.  
5 Press to start play.  
,
rotate to select, then press to  
confirm.  
Tip  
To go back to upper level of a folder, press  
.
EN 15  
View play information  
Intro play  
1 During playing, press DISP repeatedly to  
You can play the first 10 seconds of each track.  
view:  
1 During play, press OPTIONS repeatedly  
Track number and elapsed play time  
until [INTRO] displays.  
Artist  
Album  
Title  
Folder  
File  
2 Rotate to select a setting:  
[INTRO OFF]: Cancel intro play and  
start normal play.  
[INTRO FLD]: Start introl play in the  
current folder.  
[INTRO ALL]: Play the first 10 seconds  
of each track.  
Repeat play  
1 During play, press OPTIONS repeatedly  
Connect external sound  
source  
until [REPEAT] displays.  
2 Rotate to select a setting.  
[REPEAT ALL]: play all tracks repeatedly.  
[REPEAT TRK]: play current track  
repeatedly.  
[REPEAT FLD]: play all tracks in the  
current folder repeatedly.  
1 Connect the external sound source to  
MP3 LINK socket with a 3.5 mm cable.  
2 Press SOURCE repeatedly until [MP3  
LINK] is displayed.  
3 Operate the external component (refer  
to the instructions supplied with the  
external component).  
Shuffle play  
You can play the tracks in random order:  
1 During play, press OPTIONS repeatedly  
until [RANDOM] displays.  
2 Rotate to select a setting:  
[RANDOM OFF]: Turn off random  
play.  
[RANDOM FLD]: start random play  
for all tracks in the current folder.  
[RANDOM ALL]: start random play  
for all tracks.  
16 EN  
Tunr on/off max sound  
6 Adjust sound  
6281'  
1 Press  
.
» The current setting displays  
Adjust volume  
» [MAX ON]:The maximum sound  
(max sound) function is on.  
1 Turn clockwise/anticlockwise to  
» [MAX OFF]:The maximum sound  
increase/decrease volume.  
function is off.  
Mute  
Switch music listening zone  
You can turn off the sound of your audio.  
Philips’ innovative Zone technology enables  
driver or passengers to enjoy music with the  
best speakers balance and experience more  
vivid spacial effect as the artist is intended to  
create.You can switch the music listening zone  
from driver to passengers for the best speaker  
sound settings in car.  
1 During play, press  
.
To resume sound, press again.  
Turn Full Sound on/off  
The unit offers a pre-configured sound setting  
called FullSound™.The FullSound™ feature  
restores sonic details to compressed music and  
provides a full sound experience without any  
distortion.  
1 Press MENU/ZONE over 3 seconds.  
» The current setting displays  
2 Press  
/
to switch the zones:  
[ZONE ALL]  
[FRONT]  
1 Press Full Sound to toggle the  
[F. LEFT] (Front left)  
[F. RIGHT] (Front right)  
FullSound™ feature off and on (default).  
3 Press OK to confirm the selection and  
exit the menu.  
Select preset equalizer  
1 Press EQ/Audio.  
Other sound settings  
» Current Equalizer setting is displayed.  
2 Press EQ/Audio again to select a preset  
You can also adjust the preset EQ/Audio settings.  
EQ setting:  
1 Press EQ/Audio for 3 seconds.  
[OPTIMAL] (optimal)  
[FLAT] (flat)  
2 Press  
/
repeatedly to select the item  
to be adjusted:  
[POP] (pop)  
[BASS LEVEL] range: -7 to +7  
[BASS CFQ] (bass center frequency)  
range: 60, 80, 100, 200.  
[USER] (user)  
[TECHNO] (techno)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[JAZZ] (jazz)  
[MIDDLE LEVEL] range:-7 to +7  
[MIDDLE CFQ] (middle center  
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.  
EN 17  
[TREBLE LEVEL] range: -7 to +7  
[TREBLE CFQ] (treble center  
frequency) range: 10.0k, 12.5k, 15.0k,  
17.5k.  
[BALANCE] range: 12L to 12R.  
(L= left speaker, R = right speaker)  
[FADER] range: 12R to 12F. (R =  
rear speaker, F = front speaker)  
[ZONE DEP] (zone depth) options:  
DEPTH 1, DEPTH 2, DEPTH 3,  
DEPTH 4.  
7 Adjust system  
settings  
Turn beep sound on/off  
Each time you press a button, the unit beeps.  
You can turn on or off this beep sound.  
1 Press MENU.  
[RESUME]: Resume the preset EQ  
value to factory default value.  
2 Press  
/
repeatedly until [BEEP]  
displays.  
3 Rotate to select a value/option.  
3 Rotate to select a setting:  
[BEEP ON]: Turn on the beep sound.  
[BEEP OFF]: Turn off the beep sound.  
Select blackout setting  
You can set the screen to turn off automatically  
after the unit is idle for 10 or 20 seconds.  
1 Press MENU.  
2 Press  
/
repeatedly until [BLKOUT]  
displays.  
3 Rotate to select a setting:  
[BKO 10 S] : Turn off the screen  
automatically 10 seconds after last  
operation.  
[BKO 20 S] : Turn off the screen  
automatically 20 seconds after last  
operation.  
[BKO OFF] : Never turn off the  
screen.  
Turn demo mode on/off  
1 Press MENU.  
2 Press  
displays.  
/
repeatedly until [DEMO]  
18 EN  
3 Rotate to select a setting:  
Reset  
[DEMO ON] : Turn on the demo  
mode. When the unit is idle for  
more than 10 seconds, all functions  
are displayed.  
[DEMO OFF] : Turn off the demo  
mode.  
You can reset the unit to its default setting.  
1 Detach the front panel.  
2 Press the reset button by using a ball-  
point pen or a similar tool.  
» Preset adjustments such as preset  
channels and sound adjustments are  
erased.  
LCD Color  
You can change LCD background color.  
1 Press MENU.  
2 Press  
/
repeatedly until [LCD  
COLOR] displays.  
3 Rotate to select a setting:  
[DEFAULT] (default setting)  
[COLOR SCAN] (color scan)  
[WHITE] (white)  
[GREEN 1] (green 1)  
[GREEN 2] (green 2)  
[GREEN 3] (green 3)  
[AMBER] (amber)  
[PINK 1] (pink 1)  
[PINK 2] (pink 2)  
[PURPLE 1] (purple 1)  
[PURPLE 2] (purple 2)  
[BLUE 1] (blue 1)  
[BLUE 2] (blue 2)  
[USER COLOR] (user color)  
Set user color  
1 Press MENU.  
2 Press  
/
repeatedly until [LCD  
COLOR] displays.  
3 Press  
.
4 Rotate to select [USER COLOR].  
5 Press to confirm.  
6 Rotate to adjust color of the LCD.  
R(red)/G(green)/B(blue)  
7 Press to exit user color setting mode.  
EN 19  
3 Replace the fuse.  
8 Additional  
information  
Detach the front panel  
You can detach the front panel to deter theft.  
1 Press to release the panel.  
2 Push the left side of the panel rightward.  
Note  
If the new fuse gets damaged again, there may  
be an internal malfunction. Consult your Philips  
dealer.  
Remove the unit  
You can remove the unit from the dashboard.  
1 Detach the front panel.  
2 Pull out the unit by using the disassembly  
tools.  
3 Pull the panel towards you to disengage it  
from the chassis.  
4 Store the panel in the supplied carry case  
to protect it from dirt or damage.  
Replace fuse  
If the fuse is damaged,  
1 Check the electric connection.  
2 Buy a fuse that matches the voltage of the  
damaged fuse.  
20 EN  
Compatible USB devices:  
9 Product  
information  
USB flash memory: USB 1.1 host with  
interface reading all speed support (1.1,  
2.0)  
USB flash players: USB 1.1 host with  
interface reading all speed support (1.1, 2.0)  
Memory cards (SD / SDHC)  
Note  
Supported formats:  
Product information is subject to change without  
prior notice.  
USB or memory file format: FAT16, FAT32  
MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
Power supply  
12 V DC (11 V - 16 V),  
negative ground  
15 A  
WMA V4, V7, V8, V9 (L1, L2)  
ISO9660, Joliet  
Maximum title number: 512 (depending  
on file name length)  
Fuse  
Suitable speaker  
impedance  
Maximum power  
output  
4 - 8  
Maximum album number: 255  
Supported sampling frequencies: 2 kHz,  
44.1 kHz, 48 kHz  
50 W x 4 channels  
Supported Bit-rates: 2~256 (kbps),  
variable bit rates  
Directory nesting up to a maximum of  
8 levels  
Number of albums/ folders: CD  
maximum 99, USB maximum 199  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 or later  
File name in Unicode UTF8 (maximum  
length 64 bytes)  
Continuous power 24 W x 4 RMS  
output  
Pre-Amp output  
voltage  
(4 10% T.H.D.)  
2.0 V  
Aux-in level  
Dimensions (W x  
H x D)  
500 mV  
188 x 58 x 201 mm  
Weight  
1.47 kg  
Radio  
Unsupported formats:  
Frequency range 87.5 - 108.0 MHz (100kHz  
Empty albums: an empty album is an  
album that does not contain MP3/WMA  
files, and is not be shown in the display.  
Unsupported file formats are skipped. For  
example, Word documents (.doc) or MP3  
files with extension .dlf are ignored and  
not played.  
- FM  
per step in auto search and  
50kHz per step in manual  
search)  
Frequency range 522 - 1620 KHz (9 kHz)  
- AM (MW) 530 - 1710 kHz (10 kHz)  
Usable sensitivity 8 μV  
- FM  
Usable sensitivity 30 μV  
- AM (MW)  
(S/N = 20 dB)  
AAC, WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
WMA files in Lossless format  
EN 21  
The CD skips tracks  
10 Troubleshooting  
Ensure that the CD is not damaged or  
dirty.  
Ensure that random mode is deactivated.  
Disc cannot be ejected  
Press and hold .  
Caution  
Never remove the casing of this apparatus.  
Preset stations lost.  
To keep the warranty valid, never try to repair  
the system yourself.  
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/support).When you contact Philips,  
ensure that your apparatus is nearby and the  
model number and serial number are available.  
Display show ERR-12  
USB data error. Check the USB device.  
No power or no sound.  
Car engine is not on. Turn the car engine  
on.  
Cable is not correctly connected. Check  
connections.  
Fuse is burnt. Replace fuse.  
Volume is too low. Adjust volume.  
If the above solutions cannot help, press  
the RESET button.  
Ensure that the track played is of a  
compatible format.  
Noise in broadcasts.  
Signals are too weak. Select other  
stations with stronger signals.  
Check the connection of the car antenna.  
Change broadcast from Stereo to mono.  
Cannot play disc  
Ensure that the disc label is inserted with  
the printed side facing up.  
Wipe the disc with fibre cleaning cloth  
from the centre to the edge in a straight  
line.  
This disc may be defective. Play another  
disc.  
Ensure that the CD is a finalised CD/  
CD-R/CD-RW.  
Ensure that the CD is not encoded with  
copyright protection technologies.  
22 EN  
11 Glossary  
M
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3. With the MP3 format, one CD-R or  
CD-RW can contain about 10 times more  
data than a regular CD.  
S
SD  
Secure Digital. A type of memory card with a  
flash memory.  
SDHC  
Secure Digital High Capacity (SDHC) is a  
type of flash memory card based on the SDA  
2.00 specification. The SDA 2.00 specification  
enables SD cards to reach higher capacities  
from 4GB to 32GB, and growing.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools, Windows Media Video encoding  
technology, and Windows Media Audio  
encoding technology.  
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CEM3000/x78_UM_V2.0  

Pyramid Car Audio PB1000 User Manual
PUR Water Purification Products Water Cooler PUR200 User Manual
Philips 22IE User Manual (2)
Panasonic NV GS37EB User Manual
Panasonic DMWGWC1 User Manual
Olympus Stylus 7030 User Manual
Logitech S715i User Manual
Kenwood LZ 702IR User Manual
Kenwood Car Amplifier KDC X896 User Manual
JVC KS FX771 User Manual