Panasonic DMCS3K User Manual

Basic Owner’s Manual  
Digital Camera  
Model No.  
DMC-S3  
DMC-S1  
Before connecting, operating or adjusting  
this product, please read the instructions  
completely.  
More detailed instructions on the operation of  
this camera are contained in “Owner’s Manual  
for advanced features (PDF format)” in the  
supplied CD-ROM. Install it on your PC to read it.  
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,  
VQT3E21  
M1210KZ0  
P
Dear Customer,  
Thank you for choosing Panasonic!  
You have purchased one of the most sophisticated and reliable products  
on the market today. Used properly, we’re sure it will bring you and your  
family years of enjoyment. Please take the time to fill in the information  
below.  
The serial number is on the tag located on the underside of your Camera.  
Be sure to retain this manual as your convenient Camera information  
source. Please note that the actual controls and components, menu  
items, etc. of your Digital Camera may look somewhat different from  
those shown in the illustrations in this Owner’s Manual.  
Carefully observe copyright laws.  
• Recording of pre-recorded tapes or discs or other published or  
broadcast material for purposes other than your own private use may  
infringe copyright laws. Even for the purpose of private use, recording  
of certain material may be restricted.  
Model No.  
Serial No.  
A lithium ion battery that is recyclable powers  
the product you have purchased. Please call  
1-800-8-BATTERY for information on how to recycle  
this battery.  
Information for Your Safety  
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE  
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.  
2
VQT3E21 (ENG)  
FCC Note:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
FCC Caution: To assure continued compliance, follow the attached  
installation instructions and use only shielded interface  
cables with ferrite core when connecting to computer or  
peripheral devices.  
Any changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
this equipment.  
Declaration of Conformity  
Trade Name: Panasonic  
Model No.:DMC-S3  
DMC-S1  
Responsible party: Panasonic Corporation of  
North America  
DMC-S3  
One Panasonic Way,  
Secaucus, NJ 07094  
Support Contact: Panasonic Consumer  
Electronics Company  
1-800-211-PANA (7262)  
This device complies with Part 15 of the FCC  
DMC-S1  
Rules. Operation is subject to the following  
two conditions: (1) This device may not cause  
harmful interference, and (2) this device must  
accept any interference received, including  
interference that may cause undesired operation.  
(ENG) VQT3E21  
3
WARNING:  
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT  
DAMAGE,  
• DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,  
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED  
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE  
APPARATUS.  
• USE ONLY THE RECOMMENDED ACCESSORIES.  
• DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO  
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
Product identification marking  
Product  
Digital camera  
Location  
Bottom  
Bottom  
Battery charger  
About the battery pack  
CAUTION  
Battery pack (Lithium ion battery pack)  
• Use the specified unit to recharge the battery pack.  
• Do not use the battery pack with equipment other than the specified unit.  
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.  
• Do not touch the plug terminals (+ and −) with metal objects.  
• Do not disassemble, remodel, heat or throw into fire.  
If any electrolyte should come into contact with your hands or clothes,  
wash it off thoroughly with water.  
If any electrolyte should come into contact with your eyes, never rub  
the eyes. Rinse eyes thoroughly with water, and then consult a doctor.  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the manufacturer’s instructions.  
• Do not heat or expose to flame.  
• Do not leave the battery(ies) in an automobile exposed to direct  
sunlight for a long period of time with doors and windows closed.  
4
VQT3E21 (ENG)  
Warning  
Risk of fire, explosion and burns. Do not disassemble, heat above 60 °C  
(140 °F) or incinerate.  
About the battery charger  
CAUTION!  
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-  
IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE  
UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC  
SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE  
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT  
OBSTRUCT THE VENTILATION VENTS.  
Battery charger  
This battery charger operates on AC between 110 V and 240 V.  
But  
• In the U.S.A. and Canada, the battery charger must be connected to  
a 120 V AC power supply only.  
• When connecting to an AC supply outside of the U.S.A. or Canada,  
use a plug adaptor to suit the AC outlet configuration.  
Cautions for Use  
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).  
• Do not use any other USB connection cables except the supplied one.  
Keep the camera as far away as possible from electromagnetic equipment  
(such as microwave ovens, TVs, video games etc.).  
• If you use the camera on top of or near a TV, the pictures and sound on the  
camera may be disrupted by electromagnetic wave radiation.  
• Do not use the camera near cell phones because doing so may result in noise  
adversely affecting the pictures and sound.  
• Recorded data may be damaged, or pictures may be distorted, by strong  
magnetic fields created by speakers or large motors.  
• Electromagnetic wave radiation generated by microprocessors may adversely  
affect the camera, disturbing the pictures and sound.  
• If the camera is adversely affected by electromagnetic equipment and stops  
functioning properly, turn the camera off and remove the battery or disconnect  
AC adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC  
adaptor and turn the camera on.  
Do not use the camera near radio transmitters or high-voltage lines.  
• If you record near radio transmitters or high-voltage lines, the recorded pictures  
and sound may be adversely affected.  
(ENG) VQT3E21  
5
Standard accessories  
Check that all the accessories are supplied before using the camera. Part  
numbers are as of January 2011.  
*
Battery pack  
USB connection  
Battery pack is indicated as  
text.  
CD-ROM  
the software on  
the text.  
Hand strap  
VFC4297  
*
When purchasing a spare battery, please purchase an optional battery  
(DMW-BCK7PP).  
• Memory cards and AV cable are optional. You can record or play back  
pictures on the built-in memory when you are not using a card.  
• If any accessories are lost, customers should contact Panasonic’s parts  
department at 1 800 833-9626 for further information about obtaining  
replacement parts.  
• Please dispose of all packaging appropriately.  
• Keep small parts in a safe place out of the reach of children.  
(ENG) VQT3E21  
7
 
Names of parts  
Shutter button  
Speaker  
DC coupler cover  
Power button  
Flash  
Lens barrel  
Lens  
Card/Battery door  
Tripod receptacle  
• Ensure that the tripod is  
stable.  
Microphone  
Self-timer indicator/  
AF Assist Lamp  
Hand strap eyelet  
Zoom button  
We recommend  
using the supplied  
hand strap to avoid  
dropping the camera.  
LCD monitor  
[MODE] button  
Cursor button  
Playback button  
[
/
] (Delete/Return) button  
[AV OUT/DIGITAL] socket  
Terminal cover  
8
VQT3E21 (ENG)  
The illustrations and screens in this manual may differ from the actual  
product. This manual uses the screens from DMC-S3 as examples in its  
explanations.  
Cursor button  
[MENU/SET]  
(menu display/set)  
Up cursor button (▲)  
• Exposure  
Compensation  
Left cursor button (◄)  
• Self-timer  
Right cursor button (►)  
• Flash  
Down cursor button (▼)  
• Changing information  
display  
In this manual, the button that is used is shaded or indicated  
by▲▼◄►.  
Always use a genuine Panasonic AC adaptor (DMW-AC5PP: optional).  
When using an AC adaptor, ensure that the Panasonic DC coupler  
(DMW-DCC10; optional) and AC adaptor (DMW-AC5PP; optional) are  
used.  
If the power supply is cut off due to a power cut or the AC adaptor being  
disconnected, the motion picture being recorded using the AC adaptor  
will not be recorded.  
Some tripods or unipods, and some methods of holding the camera  
may block the speaker, making it difficult to hear the beep, etc.  
(ENG) VQT3E21  
9
 
Charging the battery  
About batteries that you can use with this unit  
The batteries that can be used with this unit are NCA-YN101G  
(supplied) and DMW-BCK7PP (optional).  
It has been found that counterfeit battery packs which look very  
similar to the genuine products are made available to purchase  
in some markets. Some of these battery packs are not adequately  
protected with internal protection to meet the requirements of  
appropriate safety standards. There is a possibility that these  
battery packs may lead to fire or explosion. Please be advised  
that we are not liable for any accident or failure occurring as a  
result of use of a counterfeit battery pack. To ensure that safe  
products are used we recommend that a genuine Panasonic  
battery pack is used.  
Use the dedicated charger and battery.  
The battery is not charged when the camera is shipped. Charge  
the battery and set the clock before use.  
Charge the battery with the charger indoors (10 °C to 30 °C)  
(50 °F to 86 °F).  
Insert the battery terminals and attach  
the battery to the charger  
Ensure [LUMIX] faces outwards.  
10  
VQT3E21 (ENG)  
Connect the charger to the electrical outlet  
Charging light ([CHARGE])  
On: Charging in progress  
1
*
(approx. 115 min. if fully depleted)  
1 Charge time is approx. 120 min.  
for DMW-BCK7PP (optional)  
Off: Charging complete  
*
Detach the battery after charging is completed  
Recording capacity guidelines (pictures/recording time)  
Supplied battery  
DMW-BCK7PP (optional)  
Capacity  
660 mAh  
680 mAh  
2
2
Approx. 250 /240 3 pictures Approx. 255 /245 3 pictures  
*
*
*
*
Number of recordable pictures  
Recording time  
Approx. 125 /120 3 min. Approx. 127 /122 3 min.  
2
2
*
*
*
*
Playback time  
Approx. 200 min. Approx. 205 min.  
2 DMC-S3  
*
3 DMC-S1  
*
Recording conditions by CIPA standard  
• CIPA is an abbreviation of [Camera & Imaging Products Association].  
• [Normal Picture] Mode  
Temperature: 23 °C (73.4 °F)/Humidity: 50 %RH when LCD monitor is on.  
• Using a Panasonic SD Memory Card (32 MB).  
• Using the supplied battery.  
• Starting recording 30 seconds after the camera is turned on. (When the  
Optical Image Stabilizer function is set to [ON].)  
Recording once every 30 seconds with full flash every second recording.  
Perform a zoom operation every recording (W end → T end, or T end → W end)  
• Turning the camera off every 10 recordings and leaving it until the  
temperature of the battery decreases.  
The number of recordable pictures or available operating time may vary according  
to surrounding environment and usage conditions. Figures may be reduced if  
flash, zoom, or other functions are used frequently, or in colder climates.  
(ENG) VQT3E21  
11  
 
Inserting and removing the card  
(optional)/the battery  
Turn off the power and slide  
the card/battery door out ( )  
before opening the door ( )  
as illustrated  
Insert the battery and card,  
making sure that their  
orientation is correct  
• Battery: Insert all the way firmly until  
a locking sound is heard,  
and check that the lever is  
hooked over the battery.  
• Card: Insert all the way firmly until it  
clicks.  
Close the card/battery door  
and slide the door in until  
you hear a locking sound  
To remove  
To remove battery:  
To remove card:  
move lever in direction of arrow.  
press down in center.  
Lever  
12  
VQT3E21 (ENG)  
Always use genuine Panasonic batteries (NCA-YN101G: supplied or  
DMW-BCK7PP: optional).  
If you use other batteries, we cannot guarantee the quality of this  
product.  
Insert the card fully, otherwise it may be damaged.  
Picture save destination (cards and built-in memory)  
Built-in memory (DMC-S3: Approx. 70 MB/DMC-S1: Approx. 20 MB)  
The built-in memory can be used as a temporary storage device when  
the card being used becomes full.  
The access time for the built-in memory may be longer than the access  
time for a card.  
Compatible memory cards (optional)  
The following SD standard-based cards  
(Panasonic brand recommended)  
Type of Card  
Capacity  
Notes  
SD  
8 MB – 2 GB • Can be used with devices compatible with the  
respective formats.  
Memory Cards  
• Before using SDXC Memory Cards, check that  
your computer and other devices support this  
type of card.  
SDHC  
Memory Cards  
SDXC  
Memory Cards  
4 GB – 32 GB  
48 GB, 64 GB  
• Only the cards listed on the left with the given  
capacities are supported.  
*
• Using a card of SD Speed “Class 6” or above  
is recommended for recording motion pictures.  
*
SD speed class refers to a specification for sustained write speeds. Confirm the  
SD speed by checking the card label or other card related materials.  
(Example) Class 6  
Latest information:  
(This Site is English only.)  
Keep the Memory Card out of reach of children to prevent swallowing.  
(ENG) VQT3E21  
13  
 
Setting the clock  
The clock is not set when the camera is shipped.  
Press the Power button ( )  
[Please set the clock] is displayed.  
Press [MENU/SET] ( )  
Press ◄► to select the items  
(year, month, day, hour, minute,  
display order or time display  
format), and press ▲▼ to set  
To cancel → Press [  
/
].  
Press [MENU/SET]  
Confirm the setting and press [MENU/SET]  
• To return to the previous screen, press  
[
/
].  
• Turn on the power again and check the time display.  
To change time setting  
Select [Clock Set] from [Rec] or [Setup] menu, perform  
and  
.
14  
VQT3E21 (ENG)  
Setting the menu  
Refer to the procedure example below when operating the [Setup] menu,  
[Rec] menu and [Playback] menu.  
Example: Setting [AF Mode] from  
Mode  
to  
in the [Normal Picture]  
Press [MENU/SET] to display the menu  
Switching to the [Rec] menu  
Select [Rec], and press [MENU/SET].  
Press ▲▼ to select [AF Mode]  
and then press [MENU/SET]  
• Depending on the item, its setting may not  
appear or it may be displayed in a different  
way.  
Press ▲▼ to select  
and then  
press [MENU/SET] to set  
Press [ ] several times to  
/
close the menu  
(ENG) VQT3E21  
15  
 
Selecting the Recording Mode  
Press the Power button ( )  
The power is turned on.  
Press the [MODE] button ( )  
Press ▲▼◄► to select the  
Recording Mode  
Press [MENU/SET] ( )  
[Intelligent Auto] Mode  
Taking pictures with automatic settings.  
[Normal Picture] Mode  
Take pictures with your own settings.  
[Scene Mode]  
Take pictures according to scene.  
[Motion Picture] Mode  
Take motion pictures.  
16  
VQT3E21 (ENG)  
Taking pictures with automatic settings  
[Intelligent Auto] Mode  
Recording Mode:  
Optimum settings are made automatically from information such as  
“face,” “movement,” “brightness,” and “distance” just by pointing the  
camera at the subject, meaning that clear pictures can be taken without  
the need to make settings manually.  
Press the Power button ( )  
The power is turned on.  
Press the [MODE] button ( )  
Press ▲▼◄► to select  
[Intelligent Auto] Mode  
Press [MENU/SET] ( )  
Take pictures  
Press halfway  
Press fully  
(press lightly and focus) (press the button all the  
way to record)  
• If jitter becomes noticeable, use both  
hands, keep your arms close to your  
body, and stand with your feet at shoulder  
width.  
Focus display (  
)
(In focus: lit / Not in focus: flashing)  
• The AF area ( ) is displayed around  
the subject’s face by the Face Detection  
function. In other cases, it is displayed at  
the point on the subject which is in focus.  
• Focus: Max. W: 5 cm (0.17 feet)/  
Max. T: 1 m (3.28 feet) and above  
(ENG) VQT3E21  
17  
 
Taking pictures with automatic settings  
Recording Mode:  
[Intelligent Auto] Mode (Continued)  
Automatic Scene Detection  
Camera identifies scene when pointed at the subject, and makes  
optimum settings automatically. The type of scene detected is indicated  
by a blue icon for two seconds.  
People and night scenery are  
detected  
People are detected  
(Only when  
is selected)  
Scenery is detected  
Night scenery is detected  
A sunset is detected  
A close-up shot is detected  
Reads subject movement to avoid blurring when the scene does not  
correspond to any of the above.  
If the camera automatically identifies the scene and determines that  
people appear as subjects in the picture (  
or  
), Face Detection is  
activated, and the focus and exposure are adjusted for the recognized  
faces.  
18  
VQT3E21 (ENG)  
Taking motion pictures [Motion Picture] Mode  
Recording Mode:  
Press the [MODE] button  
Press ▲▼◄► to select [Motion Picture] Mode  
Press [MENU/SET]  
Remaining recording time  
(approx.)  
Start recording  
Press halfway  
(adjust the focus)  
Press fully  
(start recording)  
End recording  
Elapsed recording time  
Press fully  
The focus and zoom will remain as they were at the beginning of  
recording.  
Immediately release the shutter button after pressing it all the way.  
When there is no space left to store the motion picture, recording  
automatically ends.  
Motion pictures can be recorded continuously up to 2 GB. To record  
more than 2 GB, press the shutter button again. (Remaining time for  
continuous recording is displayed on the screen.)  
(ENG) VQT3E21  
19  
 
Viewing your pictures[Normal Play]  
Playback Mode:  
Press the Playback button ( )  
Press ◄► to select the picture  
To play back a motion picture, select an image with ◄ or ►, and then  
press ▲ to start playback.  
Be careful not to block the speaker.  
You can print pictures by connecting a camera to your computer or  
printer, or by giving an SD card to a shop assistant at a photo shop.  
Deleting pictures  
Playback Mode:  
Deleted pictures cannot be recovered.  
Press [  
/
] ( ) to delete the  
displayed picture  
Press ◄ to select [Yes] and  
then press [MENU/SET] (  
)
20  
VQT3E21 (ENG)  
Reading the Owner’s Manual (PDF format)  
More detailed instructions on the operation of this camera are contained  
in “Owner’s Manual for advanced features (PDF format)” in the supplied  
CD-ROM. Install it on your PC to read it.  
For Windows  
Turn the PC on and insert the CD-ROM containing  
the Owner’s Manual (supplied)  
Click the “Owner’s Manual”  
Select the desired language and then click  
“Owner’s Manual” to install  
To return to the install menu.  
See next page.  
Double click the “Owner’s Manual” shortcut icon  
on the desktop  
(ENG) VQT3E21  
21  
 
Reading the Owner’s Manual (PDF format)  
(Continued)  
When the Owner’s Manual (PDF format) will not open  
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0  
or later to browse or print the Owner’s Manual (PDF format).  
Insert the CD-ROM containing the Owner’s Manual (supplied),  
click  
and then follow the messages on the screen to install.  
Compatible OS: Windows 2000 SP4 / Windows XP SP3 / Windows  
Vista SP2 / Windows 7  
You can download and install a version of Adobe Reader that you can  
use with your OS from the following Web Site.  
To uninstall the Owner’s Manual (PDF format)  
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.  
• When the contents in the Program Files folder cannot be displayed,  
click the “Show the contents of this folder” to display them.  
For Macintosh  
Turn the PC on and insert the CD-ROM containing  
the Owner’s Manual (supplied)  
Open the “Manual” folder in the CD-ROM and then  
copy the PDF file with the desired language inside  
the folder  
Double click the PDF file to open it  
22  
VQT3E21 (ENG)  
Specifications  
Digital Camera: Information for your safety  
Power Source  
Power  
DC 5.1 V  
When recording: 1.2 W  
Consumption When playing back: 0.7 W  
Camera effective 14,100,000 pixels (DMC-S3)  
pixels  
12,100,000 pixels (DMC-S1)  
Image sensor  
1/2.33” CCD,  
total pixel number 14,500,000 pixels (DMC-S3)  
12,700,000 pixels (DMC-S1)  
Primary color filter  
Lens  
Optical 4 x zoom  
f=5.0 mm to 20.0 mm  
(35 mm film camera equivalent: 28 mm to 112 mm)/  
F3.1 (Max. W) to F6.5 (Max. T)  
Digital Zoom  
Max. 4 x  
Extended Optical Max. 8.4 x (DMC-S3)  
Zoom  
Max. 7.8 x (DMC-S1)  
(When the picture size is set to 3 million pixels [3M]  
or less.)  
Focus range  
Intelligent Auto/ 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  
Normal/  
Motion Picture  
Scene Mode  
Shutter system  
Burst recording  
Burst speed  
There may be difference in above settings.  
Electronic shutter + Mechanical shutter  
2 pictures/second (DMC-S3)  
The burst speed differs according to the writing  
speed of the card and picture size. (DMC-S1)  
Number of  
recordable  
pictures  
Until card/built-in memory is full  
(ENG) VQT3E21  
23  
 
Specifications (Continued)  
Shutter speed  
Exposure (AE)  
8 to 1/1600 th  
AUTO (Program AE)  
Exposure Compensation  
(1/3 EV Step, -2 EV to +2 EV)  
Metering Mode  
LCD monitor  
Multiple  
2.7” TFT LCD (4:3)  
(Approx. 230,400 dots)  
(field of view ratio about 100 %)  
Flash  
Flash range: (ISO  
) Approx. 40 cm (1.32 feet)  
to 3.3 m (10.8 feet) (Wide)  
Microphone  
Speaker  
Monaural  
Monaural  
Recording media Built-in Memory  
(DMC-S3: Approx. 70 MB, DMC-S1: Approx. 20 MB)  
/
SD Memory Card/SDHC Memory Card/  
SDXC Memory Card  
Recording file  
format  
Still picture  
JPEG (based on Design rule for Camera File  
system, based on Exif 2.3 standard)  
Motion  
pictures  
QuickTime Motion JPEG  
(motion pictures with audio)  
Interface  
Digital  
USB 2.0 (High Speed)  
Analog video  
Audio  
NTSC Composite  
Audio line output (Monaural)  
AV OUT/DIGITAL: Dedicated jack (8 pin)  
Terminal  
24  
VQT3E21 (ENG)  
Dimensions  
Mass  
Approx. 98.8 mm (W) x 58.8 mm (H) x 20.9 mm (D)  
[3.89” (W) x 2.31” (H) x 0.82” (D)]  
(excluding the projection part)  
With card and battery: Approx. 117 (0.26 lb)  
Excluding card and battery: Approx. 100 (0.22 lb)  
Operating  
0 °C to 40 °C (32 °F to 104 °F)  
10 %RH to 80 %RH  
temperature  
Operating  
humidity  
Language select [ENGLISH]/[ESPAÑOL]  
(ENG) VQT3E21  
25  
Specifications (Continued)  
Battery charger  
(Panasonic DE-A91B): Information for your safety  
Input  
110 V to 240 V ~ 50/60Hz, 0.2 A  
4.2 V 0.43 A (Battery charging)  
Output  
Equipment mobility: Movable  
Battery pack (lithium-ion)  
(Panasonic NCA-YN101G): Information for your safety  
Voltage/capacity 3.6 V / 660 mAh  
26  
VQT3E21 (ENG)  
Optional accessories  
Product name: Battery pack  
Product no.: DMW-BCK7PP  
Performance identical to supplied battery pack.  
Recommended for taking on holiday, etc.  
Product name: AC adaptor  
Product no.: DMW-AC5PP  
Purchase the AC adaptor and DC coupler as a set. They cannot be used  
individually with this camera.  
Product name: DC coupler  
Product no.: DMW-DCC10  
Product name: AV cable  
Product no.: DMW-AVC1  
Product name: SDXC Memory Card  
Product no.: 48 GB: RP-SDW48GU1K  
64 GB: RP-SDW64GU1K  
Product name: SDHC Memory Card  
Product no.: 4 GB: RP-SDW04GU1K  
4 GB: RP-SDN04GU1A  
8 GB: RP-SDW08GU1K  
8 GB: RP-SDN08GU1A  
16 GB: RP-SDW16GU1K  
16 GB: RP-SDN16GU1A  
32 GB: RP-SDW32GU1K  
Product name: SD Memory Card  
Product no.: 2 GB: RP-SDN02GU1A  
Product numbers are correct as of January 2011. These may be subject  
to change.  
Accessories and/or model numbers may vary between countries.  
Consult your local dealer.  
(ENG) VQT3E21  
27  
 
Digital Camera Accessory Order Form  
Please photocopy this form when placing an order.  
1. Digital Camera Model #  
2. Items Ordered  
Accessory #  
Description  
Price Each  
Quantity  
Total Price  
Subtotal  
Your State & Local Sales Tax  
Shipping & Handling  
Total Enclosed  
6.95  
3.Method of payment (check one)  
Check of Money Order enclosed (NO C.O.D.SHIPMENTS)  
VISA Credit Card #  
MasterCard Expiration Date  
DiscoverCustomer Signature  
Make Check or Money Order to: PANASONIC ACCESSORIES  
(Please do not send cash)  
4. Shipping information (UPS delivery requires complete street address)  
Ship To:  
Mr.  
Mrs.  
Ms.  
Phone#:  
First  
Last  
Day  
(
)
)
Street Address  
City  
Night  
(
State  
Zip  
TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF  
THE FOLLOWING:  
VISIT YOUR LOCAL PANASONIC DEALER  
OR  
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368  
[6 AM-6 PM M-F, PACIFIC TIME]  
OR  
MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY  
ACCESSORY ORDER OFFICE  
20421 84th Avenue South Kent, WA. 98032  
28  
VQT3E21 (ENG)  
Limited Warranty  
(ONLY FOR U.S.A. AND PUERTO RICO)  
Panasonic Consumer Electronics Company,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, New Jersey 07094  
Panasonic Digital Still Camera Products  
Limited Warranty  
Limited Warranty Coverage (For USA and Puerto Rico Only)  
If your product does not work properly because of a defect in materials or  
workmanship, Panasonic Consumer Electronics Company (referred to as “the  
warrantor”) will, for the length of the period indicated on the chart below, which  
starts with the date of original purchase (“warranty period”), at its option either (a)  
repair your product with new or refurbished parts, (b) replace it with a new or a  
refurbished equivalent value product, or (c) refund your purchase price. The  
decision to repair, replace or refund will be made by the warrantor.  
Product or Part Name  
Digital Still Camera  
Parts  
1 year  
Labor  
1 year  
CCD  
6 months  
90 days  
SD Memory Cards, Rechargeable  
Battery Pack (defective exchange)  
90 days  
Not Applicable  
During the “Labor” warranty period there will be no charge for labor. During the  
“Parts” warranty period, there will be no charge for parts. This Limited Warranty  
excludes both parts and labor for non-rechargeable batteries, antennas, and  
cosmetic parts (cabinet). This warranty only applies to products purchased and  
serviced in the United States or Puerto Rico. This warranty is extended only to the  
original purchaser of a new product which was not sold “as is”.  
(ENG) VQT3E21  
29  
 
Mail-In Service  
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the  
product prepaid to:  
Panasonic Exchange Center  
4900 George McVay Drive  
Suite B  
McAllen, TX 78503  
panacare@us.panasonic.com  
When shipping the unit, carefully pack, include all accessories, and send it  
prepaid, adequately insured and preferably in the original carton. If Lithium Ion  
batteries are shipped by air the package must be labeled “Contains Lithium Ion  
Battery (No lithium metal)”. Damaged batteries are prohibited from shipment by  
US Mail. Batteries must be securely packed in a manner to prevent  
short-circuiting and a package cannot contain more than 3 Lithium Ion batteries.  
Include a letter detailing the complaint, a return address and provide a daytime  
phone number where you can be reached. A valid registered receipt is required  
under the Limited Warranty.  
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF  
OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND  
PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR  
OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
Limited Warranty Limits And Exclusions  
This warranty ONLY COVERS failures due to defects in materials or  
workmanship, and DOES NOT COVER normal wear and tear or cosmetic  
damage. The warranty ALSO DOES NOT COVER damages which occurred in  
shipment, or failures which are caused by products not supplied by the warrantor,  
or failures which result from accidents, misuse, abuse, neglect, mishandling,  
misapplication, alteration, faulty installation, set-up adjustments, misadjustment of  
consumer controls, improper maintenance, power line surge, lightning damage,  
modification, introduction of sand, humidity or liquids, commercial use such as  
hotel, office, restaurant, or other business or rental use of the product, or service  
by anyone other than a Factory Service Center or other Authorized Servicer, or  
damage that is attributable to acts of God.  
30  
VQT3E21 (ENG)  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER  
“LIMITED WARRANTY COVERAGE”.  
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING  
OUT OF ANY BREACH OF THIS WARRANTY.  
(As examples, this excludes damages for lost time, travel to and from the servicer,  
loss of or damage to media or images, data or other memory or recorded content.  
The items listed are not exclusive, but for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY  
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED  
WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, or limitations on how long an implied warranty lasts, so the exclusions  
may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state. If a problem with this product develops during or  
after the warranty period, you may contact your dealer or Service Center. If the  
problem is not handled to your satisfaction, then write to the warrantor's  
Consumer Affairs Department at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED  
WARRANTY, ARE YOUR RESPONSIBILITY.  
(ENG) VQT3E21  
31  
Customer Services Directory (United States and Puerto Rico)  
Obtain Product Information and Operating Assistance; locate your nearest  
Dealer or Service Center; purchase Parts and Accessories; or make  
Customer Service and Literature requests by visiting our Web Site at:  
or, contact us via the web at:  
You may also contact us directly at:  
1-800-211-PANA (7262)  
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
Purchase Parts, Accessories and Instruction Books online for all Panasonic  
Products by visiting our Web Site at:  
Or, send your request by E-mail to:  
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)  
(Monday-Friday 9am-9pm EST)  
Panasonic Service and Technology Company  
20421 84th Avenue South, Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express, and Personal  
Checks)  
For hearing or speech impaired TTY users, TTY: 1-866-605-1277  
As of November 2009  
32  
VQT3E21 (ENG)  
MEMO  
(ENG) VQT3E21  
33  
• SDXC Logo is a trademark of SD-3C, LLC.  
• QuickTime and the QuickTime logo are trademarks or  
registered trademarks of Apple Inc., used under license  
therefrom.  
• This product uses “DynaFont” from DynaComware  
Corporation. DynaFont is a registered trademark of  
DynaComware Taiwan Inc.  
• Other names, company names, and product names  
printed in these instructions are trademarks or  
registered trademarks of the companies concerned.  
-If you see this symbol-  
Information on Disposal in other Countries outside  
the European Union  
This symbol is only valid in the European Union. If you  
wish to discard this product, please contact your local  
authorities or dealer and ask for the correct method of  
disposal.  
Panasonic Consumer Electronics Company,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, NJ 07094  
© Panasonic Corporation 2011  
Printed in China  

Rockford Fosgate FRC3204T User Manual
RAD Data comm RAD Data Communications Cable Box RSD 20 User Manual
PYLE Audio PLDTN68 User Manual
Power Acoustik OVN2 1250 User Manual
Perlick DS1KP User Manual
Panasonic WV LXY18C4 User Manual
Panasonic AJ SPD850MC User Manual
Magnavox MBP1100 Blu ray Disc Player MBP1100 User Manual
Lochinvar KNIGHT 400 801 User Manual
KitchenAid KFP750GC2 User Manual