Panasonic CQDF802 User Manual

E
N
G
L
I
E
N
G
L
I
Before Use and Preparations  
Name of Controls Functions(Remote Control Unit)  
S
H
S
H
Point the remote control unit at the main unit’s sensor. (page 18)  
Notes for the touch panel  
When operating  
1
2
[PWR] (SOURCE)  
[RET] (RETURN)  
You must use your fingers to touch the panel and perform operations.  
Do not press the buttons too forcefully. If you do so, you may damage or break the glass on the top surface  
of the touch panel.  
Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. If you  
do so, you may damage or break the glass on the top surface of the touch panel.  
Do not use a pen or other sharp implement to perform touch panel operations. If you do so, you may dam-  
age or break the glass on the top surface of the touch panel.  
Switches on/off the power. (page 20)  
Selects a source. (page 20)  
[BAND]  
Returns to the previous display in menu setting  
mode.  
[MENU]  
Selects a band. (page 22)  
Pause CD playing. (page 25)  
Enters the menu setting mode.  
Returns to the regular mode during menu play setting.  
[FACE]  
[" ] [# ] (Hour/minute/disc)  
Selects (vertically) or adjusts an op-  
eration or item.  
Adjusts the clock. (page 21)  
Selects disc. (page 28)  
[%] [$ ] (Track/tune)  
Selects (horizontally) or adjusts an  
operation or item.  
Selects or searches frequency/track.  
(pages 22, 25, 28)  
[SET]  
Performing operations while the top surface of the touch panel is covered with dust may damage the glass  
on the top surface of the touch panel.  
Selects the button color and display  
brightness. (page 33)  
[S·A] (Spectrum Analyzer)  
Selects the Spectrum Analyzer display  
pattern. (page 37)  
[DISP] (Display)  
Changes the display.  
(pages 22, 25, 29)  
SOURCE  
PWR  
RETURN  
BAND  
RET  
MENU  
When not operating  
Be sure to keep the front panel with the removable face plate case (included) when it has been detached  
from the main unit.  
Take care not to drop the front panel when it has been detached from the main unit. Also take care not to  
bump the top surface of the touch panel into anything. If you do so, you may break the glass on the top sur-  
face of the touch panel.  
FACE  
DISP  
1
S
A
DIMMER  
DIM  
2
3
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. If you  
do so, you may damage or break the glass on the top surface of the touch panel.  
[DIM] (DIMMER)  
Changes the dimmer level.  
(page 37)  
MUTE  
NUMBER  
Determines an operation or item.  
When cleaning (page 46)  
Car Audio  
[" ] [# ] VOL (Volume)  
Adjusts the sound volume.  
(page 21)  
[] (NUMBER)  
Enters the number input mode.  
(pages 25, 29)  
[MUTE]  
Lowers the volume. (page 21)  
[0] to [9]  
Memorizes broadcast stations. (page 23)  
Selects track/disc. (page 25, 29)  
[\ ]  
(S·HDB)  
Sets the Super High Definition Bass  
[4] (RANDOM)/[5] (SCAN)/[6] (REPEAT)  
sound. (page 33)  
Selects listening item. (pages 26, 30)  
Battery Installation  
1 Remove the battery holder.  
Lithium battery (included)  
Back side  
Pull the battery holder by the position B while pushing posi-  
tion A in the direction indicated by the arrow.  
2 Install the battery on the battery holder.  
As shown in the figure on the right, fit the battery into the battery  
holder with the i” side facing up while pressing on position A.  
3 Insert the battery holder.  
Position B  
Push the battery holder back into its original position.  
Battery Notes  
Battery holder  
Position A  
Remove and dispose of an old battery immediately.  
Battery Information: Battery type: Panasonic lithium battery (CR2025) (included)  
Battery life: Approximately 6 months with normal use (at room temperature)  
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a  
fire. Battery leakage may damage the unit.  
Do not disassemble or short the battery. Do not throw a battery into a fire.  
Keep batteries away from children to avoid the risk of accidents.  
Be careful to observe proper local disposal rules when you dispose of batteries.  
16  
17  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
General  
Clock Basics  
S
H
S
H
The 12-hour system is used for the clock.  
1 Power  
Volume  
ACC  
ON  
Turn the key in the ignition until the accessory indicator lights.  
[VOL " ]: Up  
5
6
Initial Time  
[VOL # ]: Down  
Power on  
Press the touch panel on the main unit.  
Press [PWR] (SOURCE) on the remote control unit.  
1 Press  
/[DISP] (display).  
DISPLAY  
Setting range: 0 to 40  
(Clock display)  
Power off  
Note:  
2 Press and hold  
/[DISP] (display) for  
DISPLAY  
more than 2 seconds.  
Press and hold  
on the main unit again for more than  
SOURCE  
The sound level for each source is stored in  
memory.  
(There is one volume setting for AM radio  
band, and one volume setting for FM radio  
band.)  
SOURCE  
1 second.  
Press and hold [PWR] (SOURCE) on the remote control unit  
again for more than 1 second.  
(Hours blink.)  
Note:  
or  
3 Press  
4 Press  
5 Press  
/[" ] or [# ].  
After turning off the ignition key, a security message is displayed, and the panel removable alarm that  
reminds you to take the panel is activated. (When security function is set to on page 38)  
Operations can be performed no matter which part of the touch panel is pressed BUT ONLY WHEN  
THE POWER IS ON.  
Mute/Attenuation  
(Hours set.)  
on  
MUTE  
ON: Press  
/[  
]. (  
indicator lights.)  
MUTE  
OFF: Press MUTE /[  
] again.  
MUTE  
/[DISP] (display).  
DISPLAY  
Touch panel (Power on)  
: No sound.  
SOURCE DISPLAY  
[OPEN]  
(Minutes blink.)  
: Decrease the volume to 1/10.  
(Power off)  
Decreasing volume range depends on setting.  
(page 38)  
OPEN  
or  
/[" ] or [# ].  
MOSFET  
50W  
X
4
MENU  
VOL  
(Minutes set.)  
BAND  
APM/ ;/  
1
6 Press  
/[DISP] (display).  
DISPLAY  
Open/Close the Front Panel  
(End.)  
[VOL " ] [VOL # ]  
(Hour/minute)  
OPEN: Press [OPEN] on the front panel.  
(Volume)  
CLOSE: Raise the panel by hand.  
Note:  
or  
Press and hold  
/[" ] or [# ] to  
2 Source  
change numbers rapidly.  
You can select the clock display during the unit  
Press  
/(SOURCE) to change the source.  
SOURCE  
Radio  
off. (page 38)  
ST  
Close  
Time Reset  
CD player  
Press and hold  
/[DISP] (display) for more  
than 2 seconds to activate the time setting mode to  
reset the time. Then, repeat steps 3 to 6.  
DISPLAY  
[PWR]  
(SOURCE)  
(When a CD is in the player.)  
SOURCE  
PWR  
RETURN  
RET  
BAND  
MENU  
FACE  
DISP  
1
S
A
Caution:  
[" ] [# ]  
(Hour/minute)  
DIMMER  
DIM  
CD changer control  
AUX-IN setting  
To avoid damaging the front panel, do not push  
it down or place objects on it while it is open.  
Do not pitch your nger or hand in the front  
panel.  
[DISP]  
(Display)  
SET  
(When a CD changer is  
connected and magazine is in  
the changer.) ( page 28)  
2
3
4
5
6
[" ] [# ]  
VOL (Volume)  
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
DISPLAY  
MUTE  
NUMBER  
Do not insert foreign matter into the disc slot.  
[MUTE]  
Car Audio  
20  
21  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
Radio  
S
H
S
H
1 Radio Mode  
Caution:  
One-Touch Selection of a Station  
To ensure safety, never attempt to preset sta-  
tions while you are driving.  
Press  
/[SOURCE] to change to  
7
8
SOURCE  
the radio mode.  
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.  
SOURCE  
1 Select a band and frequency (steps 1, 2 and 3 on the previous  
page).  
2 Press and hold the Spectrum Analyzer display TUNE for more than  
Radio mode display  
2 seconds until the preset number blinks.  
2 Band  
or  
FM stereo indicator  
Press [BAND] to change the band.  
3 Press  
/[" ] or [# ] to select a preset number (1j6).  
4 Press and hold P.SET (preset) for more than 2 seconds to memo-  
Band  
Frequency  
Preset number  
rize.  
Manual Preset  
Memory  
The display blinks once, and a re-  
ceiving station is saved in the  
memory.  
ST  
Manually save a station in  
the preset memory.  
Press TUNE or P.SET to  
change the cursor.  
Spectrum Analyzer display  
P.SET  
Note:  
Frequency setting can be performed even after selecting a preset num-  
SOURCE  
DISPLAY  
TUNE  
P.SET  
ber.  
(Preset)  
Note:  
Entering numbers directly on the remote control unit  
:
MOSFET  
50W  
X
4
Displays when not have any  
menu settings. Radio and AUX-  
IN mode do not have any menu  
settings.  
1 Select a band and frequency (step 1, 2 and 3 on the previous  
MENU  
VOL  
page).  
BAND  
APM/ ;/ 1  
2 Press and hold [1] to [6] for more than 2 seconds to memorize.  
Scanning:  
1 Select a band (steps 1 and 2 on the  
previous page).  
(Preset station/select)  
2 Press and hold [BAND] (APM) for  
[BAND]  
(Auto preset  
memory)  
Auto Preset  
Memory (APM)  
(Tune)  
more than 2 seconds.  
SOURCE  
PWR  
RETURN  
RET  
BAND  
MENU  
(SOURCE)  
The 6 strongest available stations will be automatically saved in the  
memory under preset number 1 to 6.  
Once set, the preset stations are sequentially scanned for 5 seconds  
each. (Scanning)  
FACE  
DISP  
1
S
A
[%] [$ ]  
(Tune)  
[" ] [# ]  
(Preset station/  
select)  
DIMMER  
DIM  
3 Tuning  
[DISP]  
(Display)  
[1] to [6]  
(Preset station)  
Automatically save rela-  
tively strong stations in  
the preset memory.  
/[$ ]: Up  
2
3
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
or  
7
8
0
9
Press  
/[" ] or [# ] for the broadcast you want to listen  
/[%]: Down  
MUTE  
to.  
NUMBER  
or  
Press and hold  
/[%] or [$ ] for  
(Press [1] to [6] on the remote control unit.)  
more than 0.5 seconds, then release.  
Seeking will start.  
Car Audio  
Note:  
Existing saved stations are overwritten with new stations after following this procedure.  
Display Change  
Press  
/[DISP] (display) to change the display.  
DISPLAY  
1 Select a band (steps 1 and 2 on the previous page).  
Radio mode display  
(Default)  
2 Press the Spectrum Analyzer display TUNE to show P.SET (preset).  
Preset Station  
Calling  
DISPLAY  
or  
3 Press  
/[" ] or [# ] to select the preset number for tuning  
in the preset station.  
(Press [1] to [6] on the remote control unit.)  
Clock display  
22  
23  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
CD Player  
S
H
S
H
Caution:  
Disc Insert and Playback  
Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.  
This unit does not support CD text display.  
This unit does not support MP3 disc playback.  
Refer to page 47 about notes on CD-Rs/RWs.  
To avoid damaging the front panel, do not push it down or place objects on it while it is open.  
Do not use irregular shaped discs.  
9
10  
1 Open the front panel.  
Press [OPEN] on the front panel.  
Do not use discs that have a seal or label attached.  
Do not insert foreign matter into the disc slot.  
[OPEN]  
SOURCE DISPLAY  
The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do  
not touch anything here except [<] (eject).  
The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Be care-  
ful when inserting a disc or pressing [<] (eject).  
(Eject)  
<
Close  
OPEN  
MOSFET  
50W X 4  
MENU  
VOL  
BAND  
APM/ ;/  
1
Listening to a CD  
Label side  
CD Player Mode  
Direct Track Selection  
Only for the remote control unit  
Example: track number 10  
[BAND] (;/1) (Pause)  
(Track)  
(When a CD is in the player.)  
Press /[SOURCE] to change to CD  
SOURCE  
player mode.  
Playback starts automatically.  
1 Press [] (NUMBER).  
CD player mode display  
Track playing time  
2 Insert the disc.  
Playback will start automatically after the  
unit recognized the loaded disc as an ordi-  
nary music CD. (When a CD-R or CD-RW  
which has CD-DA formatted data as the  
same as an ordinary music CD is loaded,  
this unit recognizes it as an ordinary music  
CD.)  
SOURCE  
Track number  
2 Press [1] [0].  
3 Press [SET] to set.  
The corresponding track starts playing.  
Track Selection  
Repeat and random indicator  
/[$ ]: Advance to the next track.  
Note:  
Close the front panel manually.  
Do not insert a disc when DISCindi-  
cator lights.  
Lights when the disc is loaded/played.  
Press  
/[DISP] (display) or [] (NUM-  
DISPLAY  
/[%]: Back to the beginning of the current track.  
BER) to return to the regular mode.  
If a non-existent track number is input and en-  
tered, the command is invalid and the display re-  
turns to regular mode.  
Note:  
Back to the previous track. (Press twice.)  
Loading a disc when the power is off allows the  
power to be turned on.  
Track Search  
Press and hold.  
Stop and Disc Eject  
Display Change  
/[$ ]: Fast forward  
Press  
play.  
/[DISP] (display) to change the dis-  
DISPLAY  
1 Press [OPEN] on the front panel.  
2 Press [<] (eject) to stop CD play and eject the  
/[%]: Fast backward  
disc.  
[BAND] (Pause)  
Track number/track  
playing time (Default)  
SOURCE  
PWR  
RETURN  
RET  
BAND  
MENU  
(SOURCE)  
Release to resume the regular play.  
FACE  
DISP  
1
S
A
Note:  
[%] [$ ]  
(Track)  
[SET]  
DIMMER  
DIM  
Clock display  
Ejecting the disc when the unit is in the CD player  
mode allows the power to be turned off.  
[DISP]  
(Display)  
2
3
4
5
6
Pause  
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
Press [BAND] (;/1).  
MUTE  
[]  
(NUMBER)  
NUMBER  
DISPLAY  
Press [BAND] (;/1) again to cancel.  
[0] to [9]  
Car Audio  
(Track number)  
24  
25  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
CD Player  
(Continued)  
S
H
S
H
Note:  
Menu Setting on CD Player Mode  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
11  
12  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
REP: Lights during repeat play.  
RAND: Lights during random play.  
1 Menu  
2 Submenu  
3 Setting  
1
[MENU]  
[MENU]  
MOSFET  
50W X 4  
MOSFET  
50W  
X
4
MOSFET  
50W  
X
4
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
BAND  
BAND  
BAND  
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
1
2
(Submenu)  
1
2
1
SET  
SET  
(Setting)  
RTN  
EXIT  
: Lights during menu play setting.  
: Lights during CD player menu mode.  
Direct setting on the re-  
mote control unit when the  
menu is not displayed  
1 Menu  
2 Submenu  
3 Setting  
Press [6] (REPEAT) to change  
setting.  
Press  
or  
/[" ] or [# ] to change setting.  
: Repeat the current track.  
: Cancel  
or  
1 Press  
/
Repeat Play  
Default: REP OFF  
[%] or [$ ] to select  
REPEAT.  
(When you press a button, the  
screen on the left is displayed  
for 2 seconds.)  
2 Press SET /[SET] to set.  
1 Press [MENU] during CD  
playing to display MODE.  
2 Press SET /[SET] to set.  
Press [4] (RANDOM) to  
change setting.  
Press  
/[" ] or [# ] to change setting.  
or  
or  
1 Press  
/
Random Play  
Default: RAND OFF  
: All the available track plays in a random  
sequence.  
[%] or [$ ] to select  
On: RANDlights.  
RANDOM.  
2 Press SET /[SET] to set.  
Off:  
: Cancel  
(Displayed for 2 seconds.)  
Only for the remote control unit  
When the menu is not displayed  
Press [5] (SCAN) to change setting.  
On: The rst 10 seconds of each track plays in sequence.  
SOURCE  
RETURN  
RET  
Scan Play  
Default: Off  
PWR  
FACE  
DISP  
1
BAND  
MENU  
[MENU]  
[%] [$ ]  
Blinks.  
S
A
[DISP] (Display)  
DIMMER  
DIM  
Off: Cancel  
(Menu/submenu)  
[" ] [# ]  
(Setting)  
2
3
[5] (SCAN)  
[4] (RANDOM)  
4
5
6
(Displayed for 2 seconds.)  
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
MUTE  
[SET]  
NUMBER  
[6] (REPEAT)  
Car Audio  
26  
27  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
CD Changer Control  
S
H
S
H
CD changer functions are designed for optional Panasonic CD changer unit.  
Direct Disc Selection  
Only for the remote control unit  
Example: disc number 10  
Preparation:  
13  
14  
Connect the CD changer, and load a magazine (disc).  
Note:  
1 Press [] (NUMBER).  
Loading a magazine when the power is off allows the power to be turned on.  
Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off.  
This unit does not support CD-ROM, CD-R or CD-RW playback through the CD changer. Use the CD changer  
to listen to normal music CD exclusively.  
2 Press [1] [0].  
Pausing does not function in the CD changer mode.  
CD changer mode display  
CD Changer Mode  
Repeat and random indicator  
1
(When a CD changer is connected and a maga-  
zine is in the changer.)  
Disc number Track number  
3 Press [SET] to set.  
The rst track of the corresponding disc starts  
playing.  
Press  
/[SOURCE] to  
SOURCE  
SOURCE  
change to CD changer mode.  
Playback starts automatically.  
Note:  
Press  
/[DISP] (display) or [] (NUM-  
DISPLAY  
Press DISC or TRC to change  
the cursor.  
Note:  
BER) to return to the regular mode.  
If a non-existent disc number is input and en-  
tered, the command is invalid and the display re-  
turns to regular mode.  
: Load a magazine with CDs.  
Lights when the changer (magazine) is con-  
nected.  
Lights when the disc is played.  
: Magazine is ejected in the  
CD changer mode.  
Display Change  
SOURCE  
DISPLAY  
TRC  
(Track)  
DISC  
Press  
play.  
/[DISP] (display) to change the dis-  
DISPLAY  
MOSFET  
50W X 4  
Disc/track number (Default)  
Track playing time  
Clock display  
MENU  
VOL  
BAND  
APM/ ;/ 1  
(Disc)  
(Track)  
Note:  
Press  
/[DISP] (display) to return to the  
DISPLAY  
regular mode.  
2 Disc Selection  
/[" ]: Next disc.  
SOURCE  
PWR  
RETURN  
RET  
[%] [$ ] (Track)  
[" ] [# ] (Disc)  
[SET]  
BAND  
MENU  
(SOURCE)  
FACE  
DISP  
1
S
A
DISPLAY  
/[# ]: Previous disc.  
DIMMER  
DIM  
[DISP]  
2
3
(Display)  
[0] to [9]  
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
3 Track Selection  
Track Search  
(Disc number)  
7
8
0
9
/[$ ]: Advance to the next track.  
Press and hold.  
/[$ ]: Fast forward  
MUTE  
[]  
(NUMBER)  
NUMBER  
/[%]: Back to the beginning of the current track.  
Car Audio  
Back to the previous track. (Press twice.)  
/[%]: Fast backward  
Release to resume the regular play.  
28  
29  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
CD Changer Control  
(Continued)  
S
H
S
H
Note:  
Menu Setting on CD Changer Mode  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
15  
16  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
REP: Lights during repeat play.  
Blinks during disc repeat play.  
RAND: Lights during random play.  
Blinks during disc random play.  
1
[MENU]  
[MENU]  
1 Menu  
2 Submenu  
3 Setting  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
BAND  
BAND  
BAND  
1
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
(Submenu)  
SET  
SET  
1
2
1
2
(Setting)  
RTN  
EXIT  
: Lights during menu play setting.  
Direct setting on the remote con-  
trol unit when the menu is not  
displayed  
: Lights during CD changer menu mode.  
1 Menu  
2 Submenu  
3 Setting  
Press [6] (REPEAT) to change setting.  
Press  
or  
/[" ] or [# ] to change setting.  
or  
1 Press  
/
Repeat Play  
Default: REP OFF  
: Repeat the current track.  
(When you press a button, the  
screen on the left is displayed for  
2 seconds.)  
[%] or [$ ] to select  
REPEAT.  
2 Press SET /[SET] to set.  
: Cancel  
Press and hold [6] (REPEAT) for more  
than 2 seconds to change setting.  
or  
Press  
/[" ] or [# ] to change setting.  
: Repeat the current disc.  
: Cancel  
or  
1 Press  
/
Disc Repeat Play  
[%] or [$ ] to select  
D-REPEAT.  
2 Press SET /[SET] to set.  
(When you press a button, the  
screen on the left is displayed for  
2 seconds.)  
Default: D-REP OFF  
1 Press [MENU] during CD  
changer playing to display  
MODE.  
2 Press SET /[SET] to set.  
Press [4] (RANDOM) to change setting.  
Press  
Press  
or  
or  
/[" ] or [# ] to change setting.  
: All the available tracks on all discs  
plays in a random sequence.  
or  
1 Press  
/
Random Play  
Default: RAND OFF  
On: RANDlights.  
[%] or [$ ] to select  
RANDOM.  
2 Press SET /[SET] to set.  
Off:  
: Cancel  
(Displayed for 2 seconds.)  
Press and hold [4] (RANDOM) for  
more than 2 seconds to change setting.  
/[" ] or [# ] to change setting.  
: All the available tracks on the current  
disc plays in a random sequence.  
or  
1 Press  
/
Disc Random Play  
Default: D-RND OFF  
[%] or [$ ] to select  
D-RANDOM.  
2 Press SET /[SET] to set.  
On: RANDblinks.  
Off:  
: Cancel  
(Displayed for 2 seconds.)  
Only for the remote control unit  
When the menu is not displayed  
On: The rst 10 seconds of each track on all  
discs plays in sequence.  
Off: Cancel  
SOURCE  
PWR  
RETURN  
RET  
BAND  
MENU  
[MENU]  
[%] [$ ]  
(Menu/  
submenu)  
[" ] [# ]  
(Setting)  
[SET]  
Press [5] (SCAN) to change set-  
ting.  
Scan Play  
Default: Off  
[DISP]  
(Display)  
[5] (SCAN)  
FACE  
DISP  
1
S
A
DIMMER  
DIM  
Blinks.  
2
3
(Displayed for 2 seconds.)  
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
[4] (RANDOM)  
[6] (REPEAT)  
On: The rst 10 seconds of the rst track of all  
the discs plays in sequence.  
Off: Cancel  
MUTE  
NUMBER  
Press and hold [5] (SCAN) for  
more than 2 seconds to change  
setting.  
Disc Scan Play  
Default: Off  
Car Audio  
Blinks.  
(Displayed for 2 seconds.)  
30  
31  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
Front Panel Settings [FACE]  
S
H
S
H
Note:  
1 Menu  
2 Submenu  
3 Setting  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
17  
18  
[MENU]  
1
[MENU]  
MOSFET  
50W  
X
4
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
BAND  
BAND  
BAND  
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
1
RTN  
EXIT  
(Setting)  
1
2
1
2
3
2
SET  
(Menu)  
SET  
(Submenu)  
: Lights during menu play setting.  
: Lights during FACE mode.  
: Lights during AUDIO mode.  
Direct setting on the re-  
mote control unit when the  
menu is not displayed  
1 Menu  
2 Submenu  
3 Setting  
or  
Press  
/[" ] or [# ] to change setting.  
OPEN  
The brightness of the entire front  
panel changes.  
MENU  
BAND  
VOL  
Front Panel Brightness  
APM/ ;/  
1
Press and hold [FACE] for  
more than 2 seconds to  
change setting.  
or  
1 Press  
/
The brightness of the screen can be ad-  
justed to the desired level so that it will t  
in with the equipment inside the car and  
the front panel buttons.  
: Bright (brighter than HALF)  
[%] or [$ ] to select  
SHUTTER.  
2 Press SET /[SET] to set.  
: The entire front panel darkens and the illuminated  
colors inside the panel change in appearance.  
: Bright  
1 Press [MENU].  
2 Press or  
(When you press a button,  
the screen on the left is dis-  
played for 2 seconds.)  
/
Default: OPEN  
Setting range: OPEN, HALF, CLOSE  
[%] or [$ ] to select  
FACE.  
OPEN  
(See page 36 for information on changing  
the brightness of just the display area.)  
MOSFET  
50W  
X
4
MENU  
VOL  
BAND  
APM/ ;/  
1
3 Press SET /[SET] to set.  
or  
Press  
/[" ] or [# ] to change setting.  
Press [FACE] to change set-  
ting.  
Color Change  
You can change the color of the [VOL "  
: 5 kinds (below),  
or  
1 Press  
/
: Purple  
: Blue  
white and yellow  
[%] or [$ ] to select  
: Changes according  
to the volume level.  
# ] [MENU] [BAND] buttons.  
COLOR.  
(When you press a button,  
the screen on the left is dis-  
played for 2 seconds.)  
: Aqua blue  
: Green  
2 Press SET /[SET] to set.  
Default: 7COLOR  
Variety: 5 kinds, LEVEL, 7COLOR  
: Red  
Audio and Sound Settings [AUDIO]  
Direct setting on the re-  
mote control unit when the  
menu is not displayed  
1 Menu  
2 Submenu  
3 Setting  
or  
Press  
/[" ] or [# ] to change setting.  
S·HDB (Super High  
Denition Bass)  
Especially for rock music, the bass-sound  
will be more powerful.  
1 Press [MENU].  
Press [\ ] (S·HDB) to change  
setting.  
: The bass sounds of the speakers are strongly  
emphasized. ( lights.  
: The bass sounds of the speakers are moder-  
ately emphasized. ( lights.  
(The sounds of the subwoofer can be heard  
clearly.)  
or  
1 Press  
/
or  
2 Press  
/
[%] or [$ ] to select  
[%] or [$ ] to select  
AUDIO.  
3 Press SET /[SET] to set.  
S·HDB.  
(When you press a button,  
the screen on the left is dis-  
played for 2 seconds.)  
2 Press SET /[SET] to set.  
Default: S·HDB OFF  
Setting range: S·HDB OFF, BOOM, TIGHT  
: S·HDB is non-active.  
32  
33  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
Audio and Sound Settings [AUDIO]  
(Continued)  
S
H
S
H
Note:  
1 Menu  
2 Submenu  
3 Setting  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
19  
20  
[MENU]  
1
[MENU]  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
BAND  
BAND  
BAND  
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
1
(Setting)  
RTN  
EXIT  
2
3
2
1
2
1
(Menu)  
(Submenu)  
SET  
SET  
: Lights during menu play setting.  
: Lights during AUDIO mode.  
1 Menu  
2 Submenu  
3 Setting  
or  
Press  
/[" ] or [# ] to adjust the level.  
or  
1 Press  
/
[DISP] (Display)  
[%] or [$ ] to select  
/[" ] : Increase the bass.  
Bass and Treble  
BASS.  
SOURCE  
PWR  
RETURN  
RET  
2 Press SET /[SET] to set.  
/[# ] : Decrease the bass.  
BAND  
MENU  
You can adjust the bass and treble sound.  
[MENU]  
FACE  
DISP  
1
S
A
[%] [$ ]  
DIMMER  
DIM  
Default: BAS (Bass) 0 dB  
TRE (Treble) 0 dB  
Setting range: j12 dB to i12 dB  
(by 2 dB)  
(Menu/submenu)  
[" ] [# ]  
(Setting)  
or  
Press  
/[" ] or [# ] to adjust the level.  
or  
2
3
1 Press  
/
4
5
6
[%] or [$ ] to select  
TREBLE.  
2 Press SET /[SET] to set.  
RANDOM  
SCAN  
REPEAT  
VOL  
/[" ] : Increase the treble.  
7
8
0
9
MUTE  
[SET]  
NUMBER  
/[# ] : Decrease the treble.  
Car Audio  
or  
Press  
Press  
/[" ] or [# ] to adjust the level.  
or  
1 Press  
/
[%] or [$ ] to select  
BALANCE.  
2 Press SET /[SET] to set.  
1 Press [MENU].  
/[" ] : Right enhanced.  
Balance and Fader  
You can adjust the sound balance among  
the front, rear, right and left speakers.  
or  
2 Press  
/
/[# ] : Left enhanced.  
[%] or [$ ] to select  
AUDIO.  
3 Press SET /[SET] to set.  
Default: BAL (Balance) CNT (Center)  
FAD (Fader) CNT (Center)  
/[" ] or [# ] to adjust the level.  
or  
or  
1 Press  
/
[%] or [$ ] to select  
FADER.  
2 Press SET /[SET] to set.  
/[" ] : Front enhanced.  
/[# ] : Rear enhanced.  
Setting range: 15 levels each  
Subwoofer Level  
You can change the subwoofer volume level.  
Default: 0 dB  
Setting range: j(subwoofer mute),  
j6 dB to i6 dB (by 2 dB)  
or  
Press  
/[" ] or [# ] to adjust the level.  
or  
1 Press  
/
[%] or [$ ] to select  
SUB-W LEV.  
2 Press SET /[SET] to set.  
/[" ] : Increase the level.  
/[# ] : Decrease the level.  
Subwoofer Low Pass Filter  
Select the upper limit frequency of the  
sound from subwoofer.  
Default: 120 Hz  
Setting range: 120 Hz/80 Hz  
Press  
or 80 Hz.  
/[" ] or [# ] to change the setting 120 Hz  
or  
or  
1 Press  
/
[%] or [$ ] to select  
SUB-W FRQ.  
2 Press SET /[SET] to set.  
34  
35  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
Picture (Display) Settings [PICTURE]  
S
H
S
H
Note:  
1 Menu  
2 Submenu  
3 Setting  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
Press Spectrum Analyzer display on S A setting to  
return to the previous display.  
21  
22  
[MENU]  
1
[MENU]  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
·
BAND  
BAND  
BAND  
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
1
(Setting)  
RTN  
EXIT  
2
3
2
(Menu)  
(Submenu)  
1
2
1
SET  
SET  
: Lights during menu play setting.  
: Lights during PICTURE mode.  
Direct setting on the re-  
mote control unit when the  
menu is not displayed  
1 Menu  
2 Submenu  
3 Setting  
Press  
/[" ] or [# ] to change setting.  
: Bright  
or  
Dimmer (display brightness  
setting range)  
Press [DIM] (DIMMER) to  
change setting.  
or  
1 Press  
/
[%] or [$ ] to select  
DIMMER.  
2 Press SET /[SET] to set.  
The brightness of just  
the display area of the  
front panel changes.  
: Medium  
: Dark  
OPEN  
(When you press a button,  
the screen on the left is dis-  
played for 2 seconds.)  
MOSFET  
50W  
X
4
MENU  
VOL  
BAND  
APM/ ;/  
1
OPEN  
Default: DIMMER 3  
Setting range: DIMMER 1 to 3  
(See page 32 for information on changing  
the brightness of the entire front panel.)  
MENU  
BAND  
VOL  
APM/ ;/  
1
Press  
/[" ] or [# ] to change setting.  
or  
1 Press [MENU].  
or  
1 Press  
/
Press [S·A] to change setting.  
Spectrum Analyzer (S·A)  
Display Pattern  
Default: KEY  
Variety: KEY, PATTERN 1 to 5  
: S·A off (regular  
display)  
: S·A 3  
: S·A 4  
: S·A 5  
[%] or [$ ] to select  
or  
2 Press  
/
S·A.  
(When you press a button,  
the screen on the left is dis-  
played for 2 seconds.)  
[%] or [$ ] to select  
PICTURE.  
: S·A 1  
2 Press SET /[SET] to set.  
3 Press SET /[SET] to set.  
: S·A 2  
[DISP] (Display)  
Press  
/[" ] or [# ] to change setting.  
or  
[S·A] (Spectrum Analyzer)  
Contrast  
Allows you to adjust the display contrasts  
for better viewing.  
or  
1 Press  
/
Level up  
[%] or [$ ] to select  
CONTRAST.  
2 Press SET /[SET] to set.  
[MENU]  
SOURCE  
PWR  
RETURN  
BAND  
RET  
MENU  
FACE  
DISP  
1
S
A
[%] [$ ]  
DIMMER  
DIM  
Default: CONT 3  
Setting range: CONT 1 to 5  
(Menu/submenu)  
[" ] [# ]  
(Setting)  
2
3
Level down  
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
7
8
0
9
MUTE  
[SET]  
NUMBER  
[DIM] (DIMMER)  
Car Audio  
36  
37  
CQ-DF802W  
CQ-DF802W  
E
N
G
L
I
E
N
G
L
I
Function Settings [FUNCTION]  
S
H
S
H
Note:  
1 Menu  
2 Submenu  
3 Setting  
Press EXIT /[MENU]/[MENU], [DISP] (display) to  
return to the regular mode.  
Press RTN /[RET] (RETURN) to return to the previ-  
ous display.  
23  
24  
[MENU]  
1
[MENU]  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MOSFET  
50W X 4  
MENU  
MENU  
MENU  
VOL  
VOL  
VOL  
BAND  
BAND  
BAND  
APM/ ;/  
1
APM/ ;/  
1
APM/ ;/  
1
[DISP] (Display)  
SOURCE  
PWR  
RETURN  
RTN  
(Setting)  
RTN  
EXIT  
2
3
2
(Menu)  
(Submenu)  
1
2
1
SET  
SET  
BAND  
MENU  
[MENU]  
[%] [$ ]  
(Menu/submenu)  
[" ] [# ]  
(Setting)  
FACE  
DISP  
1
S
A
DIMMER  
DIM  
: Lights during menu play setting.  
: Lights during FUNCTION mode.  
2
3
4
5
6
RANDOM  
SCAN  
REPEAT  
VOL  
1 Menu  
2 Submenu  
3 Setting  
7
8
0
9
MUTE  
[SET]  
NUMBER  
Press  
/[" ] or [# ] to change setting.  
: No sound.  
Mute/Attenuation  
You can select how much to lower the  
or  
Car Audio  
or  
1 Press  
/
[%] or [$ ] to select  
MUTE/ATT.  
volume when  
/[MUTE] is pressed.  
MUTE  
Default: KEY: MUTE  
Setting range: KEY: MUTE, KEY: ATT  
2 Press SET /[SET] to set.  
: Decrease the volume to 1/10. (Attenuation)  
or  
Press  
Press  
/[" ] or [# ] to change setting.  
Button Operation Sound  
Enable or disable the beep or button op-  
eration.  
or  
1 Press  
/
[%] or [$ ] to select  
BEEP SET.  
2 Press SET /[SET] to set.  
: Operation sound (beep) is on.  
1 Press [MENU].  
: Operation sound (beep) is off.  
Default: BEEP ON  
or  
2 Press  
/
[%] or [$ ] to select  
FUNCTION.  
3 Press SET /[SET] to set.  
Security function  
or  
/[" ] or [# ] to change setting.  
When the key in the ignition is turned OFF.  
Security Function  
or  
1 Press  
/
Security message will be active.  
[%] or [$ ] to select SE-  
CURITY.  
2 Press SET /[SET] to set.  
: Security function is active.  
The security indicator (LED) blinks when  
the removable face plate is removed from  
the unit.  
The panel removable alarm will be active.  
: Security function is non-active.  
Default: SLED ON  
When the removable face plate is removed.  
The security indicator blinks. (page 53)  
Direct setting on the remote  
control unit on the unit off  
Press  
or  
/[" ] or [# ] to change setting.  
: Black display  
Display Setting  
You can select display pattern on the unit  
off.  
or  
1 Press  
/
[%] or [$ ] to select OFF  
DISP.  
2 Press SET /[SET] to set.  
Press [DISP] (display) to change  
setting on the unit off.  
: Demonstration display  
: Clock display is on.  
Default: BLACK  
Setting range: DEMO, CLOCK, BLACK  
38  
39  
CQ-DF802W  
CQ-DF802W  

PYLE Audio PLVWR910R User Manual
PYLE Audio PLUS PLCD25 User Manual
Pioneer XDV P90 User Manual
Philips CAM150 User Manual
Nikon 98796 User Manual
Lenovo WIDE FLAT PANEL MONITOR L2262 User Manual
Laney Amplification Car Amplifier 650W FET User Manual
KitchenAid KSB465ER0 User Manual
JVC M4S5 User Manual
JVC JVC AM FM CD BLUETOOTH Audio CD Players KDR730BT User Manual