Panasonic Blu ray Player SC BTT350 User Manual

Operating Instructions

Blu-ray Disc Home Theater Sound System

Model No. SC-BTT755

SC-BTT350

The illustration shows the image of SC-BTT755

for Australia and New Zealand.

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read the instructions completely.

Please keep this manual for future reference.

Model number suffix “EB” denotes UK model.

VQT2W23

EB GN

Before use

Remove the connector cover.

Caution for AC Mains

Lead

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug fitted

and follow the instructions below.

(For the United Kingdom and Republic of Ireland)

For your safety, please read the following text carefully.

Illustrations may differ from actual AC mains plug.

This appliance is supplied with a moulded three pin mains plug

for your safety and convenience.

Open the fuse cover with a screwdriver.

Figure A

Figure B

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the

replacement fuse has a rating of 5-ampere and that it is

approved by ASTA or BSI to BS1362.

Fuse cover

Check for the ASTA mark Ï or the BSI mark Ì on the body of

the fuse.

If the plug contains a removable fuse cover you must ensure

that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local

dealer.

Replace the fuse and close or attach the fuse cover.

Figure A

Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR

THE SOCKET OUTLET IN YOUR HOME THEN THE

FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF

AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY

13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as

stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with

the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured

markings identifying the terminals in your plug, proceed as

follows:

The wire which is coloured Blue must be connected to the

terminal which is marked with the letter N or coloured Black or

Blue.

The wire which is coloured Brown must be connected to the

terminal which is marked with the letter L or coloured Brown or

Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE

EARTH TERMINAL WHICH IS MARKED WITH THE LETTER

E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN

OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

VQT2W23

Safety precautions

Information for Users on Collection and

Disposal of Old Equipment and used

Batteries

Placement

These symbols on the products,

Set the unit up on an even surface away from direct sunlight,

high temperatures, high humidity, and excessive vibration.

These conditions can damage the cabinet and other

components, thereby shortening the unit’s service life. Do not

place heavy items on the unit.

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries should

not be mixed with general household

waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and

batteries correctly, you will help to save

valuable resources and prevent any

potential negative effects on human health

and the environment which could otherwise

arise from inappropriate waste handling.

For more information about collection and

recycling of old products and batteries,

please contact your local municipality, your

waste disposal service or the point of sale

where you purchased the items.

Voltage

Do not use high voltage power sources. This can overload the

unit and cause a fire. Do not use a DC power source. Check

the source carefully when setting the unit up on a ship or other

place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not

damaged. Poor connection and lead damage can cause fire or

electric shock. Do not pull, bend, or place heavy items on the

lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock. Do not handle the plug

with wet hands. This can cause electric shock.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Foreign matter

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact your

dealer or supplier for further information.

Do not let metal objects fall inside the unit. This can cause

electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric

shock or malfunction. If this occurs, immediately disconnect

the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

[Information on Disposal in other

Countries outside the European Union]

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the correct

method of disposal.

Service

Do not attempt to repair this unit by yourself. If sound is

interrupted, indicators fail to light, smoke appears, or any other

problem that is not covered in these instructions occurs,

disconnect the AC mains lead and contact your dealer or an

authorized service centre. Electric shock or damage to the unit

can occur if the unit is repaired, disassembled or reconstructed

by unqualified persons.

Note for the battery symbol (bottom two

symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

VQT2W23

Table of contents

Caution for AC Mains Lead ............................... 3

Safety precautions............................................. 4

Getting started

Accessory .......................................................... 6

Unit and media care .......................................... 7

Using the remote control ................................... 7

Control reference guide ..................................... 8

•Remote control .................................................................8

•Main unit (Front) ...............................................................9

•Main unit (Rear) ................................................................9

Enjoying TV with unit’s speakers ....................32

•Surround sound effects .................................................. 32

•Sound modes ................................................................. 32

•Selecting the type of audio from the

DIGITAL AUDIO IN terminal ......................................... 32

Linked operations with the TV

(VIERA Link “HDAVI Control^TM”) ......................33

•Setting the audio link ...................................................... 33

•Easy control only with VIERA remote control ................ 34

Playable discs/Cards/USB devices ................. 10

STEP 1: Preparing the speakers ..................... 12

•Assembling the speakers [BTT755]...................................12

•Preparing cables and making connection .......................13

Other devices

STEP 2: Positioning ........................................ 14

STEP 3: Connections ...................................... 15

•Speaker cable connection ..............................................15

•Connection to a TV .........................................................16

•Connection with Set Top Box, etc. .................................17

•Radio antenna connection ..............................................18

•Digital transmitter connection .........................................18

•Connection to a broadband network ...............................19

Using the iPod/iPhone .....................................34

•iPod/iPhone Connection ................................................ 34

•iPod/iPhone Playback .................................................... 35

Advanced operations

STEP 4: AC mains lead connection ................ 20

STEP 5: Preparing the wireless system.......... 20

STEP 6: Easy setup ........................................ 21

•Network Easy Setting .....................................................22

•Firmware updating ..........................................................23

Enjoying VIERA CAST .....................................36

Playback menu ................................................36

DLNA feature ...................................................38

Setup menu .....................................................39

•Speaker settings ............................................................ 43

STEP 7: Reprogramming the remote control .... 24

Inserting or removing media ............................ 24

START menu ................................................... 25

Optional speaker settings

Enjoying sound effects from all speakers ....... 26

•Enjoying surround sound effects ....................................26

Speaker installation option ...............................44

Reference

Playback

Troubleshooting guide .....................................45

Messages ........................................................ 48

About MP3/JPEG/DivX/

AVCHD/MPEG2 files ....................................... 49

Supplemental information ................................50

Glossary ...........................................................52

Specifications ...................................................53

Index ................................................................55

Playing video contents .................................... 27

•Other operations during play ..........................................27

•Useful functions ..............................................................28

•Enjoying BD-Live or BONUSVIEW in BD-Video .............28

•Regarding DivX ..............................................................29

Enjoying Blu-ray 3D^TMvideo ............................ 29

•3D settings ......................................................................29

Playing still pictures ......................................... 30

•Useful functions...............................................................30

Playing music .................................................. 31

Radio

Listening to the Radio ...................................... 31

•Presetting stations automatically ....................................31

•Presetting stations manually ...........................................31

•Listening/confirming the preset channels .......................32

•RDS broadcasting ..........................................................32

VQT2W23

Getting started

Indicates features applicable to:

SC-BTT755 only

[BTT350]

≥ These operating instructions are applicable to models

[BTT755]:

: SC-BTT350 only

SC-BTT755 and SC-BTT350 for a variety of regions.

Unless otherwise indicated, illustrations in these

operating instructions are of SC-BTT755 for Australia

and New Zealand.

≥ Operations in these instructions are described mainly

with the remote control, but you can perform the

operations on the main unit if the controls are the

same.

System

SC-BTT755

SA-BTT755

SB-HF730

SB-HC730

SB-HS735

SB-HW330

SC-BTT350

SA-BTT350

SB-HF230

SB-HC480

SB-HS230

SB-HW480

Main unit

Front speakers

Speaker system

Subwoofer

Centre speaker

Surround speakers

[For[Australia[and[New[Zealand]

Wireless system (with a digital transmitter)

SH-FX71

—

≥ Some accessories and external devices mentioned in these operating instructions that are not supplied with this

product may not be on sale in certain regions.

Accessory

Check the supplied accessories before using this unit.

For accessories of speakers, refer to page 12.

[BTT755]

[BTT350]

∏

1 Remote control

∏

1 Remote control

(N2QAKB000090)

∏

2 Batteries for remote control

1 Sheet of speaker cable sticker

∏

2 Batteries for remote control

1 Sheet of speaker cable sticker

1 Video cable

(K2KA2BA00001)

∏

1 FM indoor antenna

∏

1 FM indoor antenna

(RSAX0002)

∏

1 Antenna plug adaptor

∏

1 Antenna plug adaptor

(K1YZ02000013)

For the United Kingdom and Republic of Ireland

∏

AC mains lead

∏

AC mains lead

1 For the United Kingdom and Republic of Ireland

(K2CZ3YY00005)

1 For the United Kingdom and Republic of Ireland

(K2CZ3YY00005)

2 For Australia and New Zealand

(K2CJ2DA00010)

1 For Australia and New Zealand

(K2CJ2DA00010)

(RFAX1023) with a ferrite core

≥ Product numbers correct as of June 2010. These may be subject to change.

≥ Do not use AC mains lead with other equipment.

VQT2W23

Unit and media care

Using the remote

control

∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Insert so the poles (i and j) match those in the remote

control.

∫ Clean the lens with the lens cleaner

Lens cleaner: RP-CL720E

≥ This lens cleaner may not be available for sale in all

countries, e.g. not available in Germany, please consult

your Panasonic dealer for advice.

≥ This lens cleaner is primarily for use on Panasonic DVD

recorders (DIGA), but it is also suitable for use on this unit.

R6/LR6, AA

(Alkaline or manganese

batteries)

∫ Clean discs

Point it at remote control signal sensor on this unit. (> 9)

DO NOT

Mishandling of batteries can cause electrolyte leakage which can damage

items the fluid contacts and may cause a fire.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for

a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not attempt to recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if the remote control is not going to be used for a long

period of time. Store in a cool, dark place.

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals

on the rear side of the card.

≥ Do not use the following discs:

jDiscs with exposed adhesive from removed stickers or

labels (rented discs etc).

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

jDiscs that are badly warped or cracked.

jIrregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the unit. If

you discard this unit either by disposal or transfer, then follow

the procedure to return all the settings to the factory presets to

delete the user settings. (> 45, “To return all settings to the

factory preset.”)

≥ The operation history may be recorded in the memory of this

unit.

VQT2W23

Control reference guide

Remote control

VOL

Turn the unit on and off (> 21)

Display the Home screen of VIERA CAST (> 36)

Select title numbers, etc./Enter numbers or characters

(> 36)

abc

def

1 2 3

VOL

[CANCEL]: Cancel

ghi

jkl

mno

4 5 6

Basic playback control buttons (> 27)

Select preset radio stations (> 32)

Show status messages (> 27)

Show Top Menu/DIRECT NAVIGATOR (> 27)

[3, 4, 2, 1]: Menu selection

qrs

tuv

xyz

7 8 9

MUTE

CANCEL

BD/SD

PIP

RADIO

EXT-IN

iPod

[OK]: Selection

[2, 1]: Select preset radio station (> 32)

[2] (2;), [1] (;1): Frame-by-frame (> 27)

Show OPTION menu (> 28)

PLAY

SLOW

10 Coloured buttons (red, green yellow, blue)

These buttons are used when;

SKIP

PAUSE

≥ Operating a BD-Video disc that includes Java^TM

applications (BD-J).

≥ Displaying “Title View” and “Album View” screens.

(> 30)

STOP

STATUS

EXIT

≥ Operating contents of VIERA CAST (> 36)

11 Set the sound mode (> 26)/Select speaker channel

(> 26)

12 Select surround sound effects (> 26)

13 TV operation buttons

OPTION

RETURN

AUDIO

You can operate the TV through the unit’s remote control.

[Í]: Turn the television on and off

[AV]: Switch the input select

[i j VOL] : Adjust the volume

SOUND SURROUND DISPLAY

14 Adjust the volume of the main unit

15 Mute the sound

CH SELECT

SLEEP

≥ “MUTE” flashes on the unit’s display, while the function is

on.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is cancelled if the unit is turned off.

16 Switch on/off Secondary Video (Picture-in-picture) (> 28)

17 Select the source

[BD/SD]: Select disc drive or SD card drive (> 25)

[iPod]: Select iPod/iPhone as the source (> 25, 35)

[RADIO/EXT-IN]: Select FM tuner, USB or external audio

as the source (> 25, 31, 32)

18 Select radio stations manually (> 31)

19 Exit the menu screen

20 Show START menu (> 25)

21 Show Pop-up menu (> 27)

22 Return to previous screen

23 Select audio (> 27)

24 Show Playback menu (> 36)/Set the sleep timer

Press and hold [jSLEEP].

While “SLEEP ££” is displayed, press [jSLEEP]

several times to select the time (in minutes).

≥ Timer selection is up to 120 minutes.

≥ Select “OFF” when cancelling the setting.

≥ To confirm the remaining time

Press and hold the button again.

VQT2W23

Main unit (Front)

VOLUME

OPEN/CLOSE

iPod

Pull open.

SD CARD

SELECTOR

10 11 12 13

Standby/on switch (Í/I) (> 21)

Press to switch the unit from on to standby mode or vice

versa. In standby mode, the unit is still consuming a small

amount of power.

USB port (> 24)

Display (FL display)

≥ “SRD” (SURROUND) lights when sound is output to the

surround speakers.

Power indicator

10 Remote control signal sensor

Distance: within approx. 7 m.

Angle: Approx. 20e up and down, 30e left and right

11 Select the source (> 25)

12 Stop (> 27)

The indicator lights when this unit is turned on.

Connect iPod/iPhone (> 34)

Adjust the volume of the main unit

Open or close the disc tray (> 24)

Disc tray

13 Start play (> 27)

SD card slot (> 24)

∫ If the front cover comes off

Hold rear side of main unit by one hand and match up left

or right side protruding hook on the cover first with the

corresponding slot on the unit.

Push the hook firmly towards the unit until it clicks into

place. Then push the succeeding hooks one by one until

all have clicked into place.

Check that the cover now moves correctly.

≥ If it does not, remove it and repeat the above procedure.

Main unit (Rear)

(

)

FM ANT 75

AUX

DIGITAL AUDIO IN

(STB/TV)

SPEAKERS

AC IN

OPTICAL

VIDEO

OUT

DIGITAL TRANSMITTER

LAN

DC OUT

OUT

500mA

WIRELESS

LAN

(ARC)

SUBWOOFER CENTER FRONT SURROUND

AC IN terminal (> 20)

Speaker terminals (> 15)

Cooling fan

HDMI AV OUT terminal (> 17)

LAN port (> 19)

AUX terminal (> 16)

VIDEO OUT terminal (> 16)

FM radio antenna terminal (> 18)

10 DIGITAL AUDIO IN terminal (> 16 , 17)

11 Digital transmitter dock (> 14, 18)

USB port for optional wireless adaptor (> 19)

VQT2W23

Playable discs/Cards/USB devices

Type

Logo examples

Type detail

Playable contents*

BD-Video

Video

JPEG

BD-RE

BD-R

[BD]

Video

DivX^®

DVD-Video

DVD-RAM

DVD-R

Video

AVCHD

JPEG

Video

AVCHD

DivX^®

MP3

[DVD]

DVD-R DL

JPEG

DVD-RW

+R/+RW/+R DL

Music CD

Video

AVCHD

—

Music [CD-DA]

DivX^®

Music [CD-DA]

MP3

[CD]

CD-R

CD-RW

JPEG

SD Memory Card (8 MB to 2 GB)

SDHC Memory Card (4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

(as of December 2009)

MPEG2

AVCHD

JPEG

[SD]

DivX^®

MP3

JPEG

USB device

(up to 128 GB)

[USB]

—

* See page 11, 49–50 for more information on the types of content that can be played.

VQT2W23

∫ Discs that cannot be played in this unit

∫ Music CD

Any other disc that is not specifically supported or

previously described.

Operation and sound quality of CDs that do not conform to

CD-DA specifications (copy control CDs, etc.) cannot be

guaranteed.

≥ 2.6 GB and 5.2 GB DVD-RAM

≥ DVD-RAM that cannot be removed from cartridge

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

∫ SD card

≥ miniSD Cards, microSD Cards, microSDHC

Cards and microSDXC Cards can be used, but

must be used with an adaptor card. These are

usually supplied with such cards, or otherwise

customer provided.

≥ Video CD and Super Video CD

≥ WMA discs

≥ HD DVD

≥ Keep the Memory Card out of reach of children to

prevent swallowing.

≥ To protect the card’s contents, move the record prevention

tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD

Card Specifications FAT12 and FAT16 formats, as well as

SDHC Memory Cards in FAT32 format (Does not support

long file name.) and SDXC Memory Cards in exFAT.

≥ If the SD card is used with incompatible computers or

devices, recorded contents may be erased due to the card

being formatted etc.

∫ Region management information

BD-Video

This unit plays BD-Video marked with labels containing the

region code “B”.

Example:

≥ Useable memory may be slightly less than the card capacity.

DVD-Video

[For[the[United[Kingdom[and[Republic[of[Ireland[

This unit plays DVD-Video marked with labels containing the

region number “2” or “ALL”.

∫ USB device

≥ This unit does not guarantee connection with all USB

devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This unit supports USB 2.0 High Speed.

Example:

ALL

[For[Australia[and[New[Zealand]

This unit plays DVD-Video marked with labels containing the

region number “4” or “ALL”.

Example:

ALL

∫ Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by

a recorder, etc. needs to be finalized by the recorder to play on

this unit. Please refer to the recorder’s instructions.

∫ BD-Video

≥ 3D videos can be played back when this unit is connected to

a 3D compatible TV using a High Speed HDMI Cable.

≥ This unit supports high bit rate audio (Dolby Digital Plus,

Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD

Master Audio) adopted in BD-Video. In order to enjoy these

audio formats, refer to page 40.

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files

were created.

≥ The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read

the disc’s instructions carefully.

VQT2W23

STEP 1: Preparing the speakers

Caution

≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may

lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified

service person if damage has occurred or if you experience a sudden change in performance.

≥

Do not attempt to attach these speakers to walls using methods other than those described in this manual.

≥ Do not touch the front netted area of the speakers. Hold by the sides.

[BTT755]

∏

2 Front speakers

2 Surround speakers

∏

4 Bases

(RYK1610-K1)

∏

8 Screws A

(XTN5+10FFJK)

∏

4 Stands (with cables)

(RYK1609A-K: RED)

(RYK1609-K: WHITE)

(RYK1609C-K: GREY)

(RYK1609B-K: BLUE)

1 Speaker cable

(REEX1154-1:

GREEN)

4 Screws B

(XYN5+J18FJK)

[BTT350]

5 Speaker cables

∏

(REEX1152A-1: RED)

(REEX1153A-1: WHITE)

(REEX1154-1: GREEN)

(REEX1155-1: GREY)

(REEX1156-1: BLUE)

Assembling the speakers [BTT755]

Caution

Preparation

≥ Do not stand on the base. Be cautious when children are

≥ To prevent damage or scratches, lay down a soft cloth and

near.

perform assembly on it.

≥ When carrying speakers, hold the stand and base parts.

≥ For wall mount, refer to page 44.

≥ Keep the screws out of reach of children to prevent

swallowing.

Back of the base

Pull the cable

straight along the

line and slide into

the groove.

Tighten

securely.

Screw A

Insert the wire fully.

r: White

s: Blue line

Push!

Press into the groove.

Screw B

Leave about 80 mm

Tighten securely.

VQT2W23

Preparing cables and making connection

Use of the speaker cable stickers is convenient

when making cable connections.

e.g. Front speaker (L)

Connecting the speaker cables. Insert the wire fully,

taking care not to insert beyond the wire insulation.

e.g. Surround speaker [BTT350]

FRONT

Lch



r: White





s: Blue line

Speaker cable sticker (supplied)

Connector

Speaker cable sticker

Colour

Push!

FRONT (L)

WHITE

RED

FRONT (R)

SURROUND (L)

SURROUND (R)

CENTRE

BLUE

GREY

GREEN

PURPLE

SUBWOOFER

Be sure to match the number on each sticker with the

connector colour.

≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

≥ Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before

connecting the appropriate cable.

≥ To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.

≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

[BTT755]

∫ Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that

may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

String (not supplied)

Thread from the wall to the speaker and tie tightly.

Rear of the speaker

Screw eye (not supplied)

Wall



Approx.150 mm









VQT2W23

STEP 2: Positioning

How you set up your speakers can affect the bass and the sound field.

∫ If irregular colouring occurs on your TV,

Setup example

turn the TV off for about 30 minutes.

If it persists, move the speakers further away from the TV.

Place the front, centre, surround speakers at approximately

the same distance from the seating position.

The angles in the diagram are approximate.

[BTT755[for[Australia[and[New[Zealand]

≥ Keep your speakers at least 10 mm away from the system for proper

ventilation.

∫ Wireless system

To avoid interference, maintain the following distances

between the wireless system and other electronic devices

that use the same radio frequency (2.4 GHz band).





60°

Wireless LAN:

approx. 2 m

e.g.,



Cordless phone and

other electronic devices:

approx. 2 m

Wireless

system

120°



The wireless system will automatically seek a clear channel if

any of these other devices interfere with its communication.

When this happens, the wireless link indicator (“ [W] ”) flashes

on the main unit, and there is a brief interruption in audio

coming from the surround speakers.



Centre speaker

≥

Put on a rack or shelf not to interfere with the TV’s various

sensors (ambient light, etc.). Vibration caused by the speaker

can disrupt the picture if it is placed directly on the TV.

This is the normal operation of the product working to assure

the best possible performance of your home theatre system.

Front speakers

Subwoofer

Surround speakers

≥ Place the speakers at the same height or higher than ear

level.

If the interference persists, try moving the other devices to

another location outside the range of the wireless system or

move the wireless system nearer to the main unit.

[BTT755[for[Australia[and[New[Zealand]

Wireless system

∫

Upgrade your system to 7.1-channel system

≥ Place the wireless system within approximately 10 m

from the main unit, and in a horizontal position with the

top panel faced upward.

≥ To allow for proper ventilation and to maintain good

airflow around the wireless system, position it with at

least 5 cm of space on all sides.

≥ Do not use the wireless system or the digital transmitter

in a metal cabinet or bookshelf.

The main unit is designed to enjoy the 7.1ch surround sound. By

connecting 2 units of the Panasonic wireless system SH-FX71

with 4 speakers, more theatre-like effect can be available.

Necessary equipment:

[BTT755[for[Australia[and[New[Zealand]

≥ 1 optional wireless system (SH-FX71)

≥ 2 additional speakers

[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]

[Except[BTT755[for[Australia[and[New[Zealand]

≥ 2 optional wireless systems (SH-FX71)

≥ 2 additional speakers

You can enjoy surround speaker

sound wirelessly when you use the

optional Panasonic wireless

accessory (SH-FX71).

For more details, refer to the operating

instructions for the optional wireless

system.

[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]

For more details, refer to the operating instructions for the

optional wireless system.

≥ Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be

negatively affected.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Positioning speakers in front

It is possible to locate all the speakers in front of the listening position.

However, the optimal surround sound effect may not be obtainable.

≥ Place speakers on flat secure bases.

≥ Placing speakers too close to floors, walls, and corners can result in

excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 44.

VQT2W23

STEP 3: Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are complete.

Speaker cable connection

Connect to the terminals of the same colour.

[BTT755[for[Australia[and[New[Zealand]













6 PURPLE Subwoofer

3 BLUE Surround speaker (Lch)

5 GREEN

2 RED

Centre speaker

4 GREY Surround speaker (Rch)

Front speaker (Rch)

Front speaker (Lch)

1 WHITE

Wireless system

SPEAKERS

ENCEINTES

RB LB

Surround selector

The surround selector

switch must be set in the

centre position.

Main unit

SURR

SUBWOOFER CENTER FRONT SURROUND

SURROUND (3 - 6

)

SIDE

SIDE AMBIOPHONIQUES

Do not connect the surround

speaker cables to the main

unit when using the wireless

system.

[Except[BTT755[for[Australia[and[New[Zealand]

6 PURPLE Subwoofer

5 GREEN Centre speaker

When using the optional wireless

system, do not attempt to connect

any extra surround or surround

back speakers to the main unit.













2 RED

Front speaker (Rch)

1 WHITE

4 GREY

3 BLUE

Front speaker (Lch)

Surround speaker (Rch)

Surround speaker (Lch)

Main unit

SUBWOOFER CENTER FRONT SURROUND

VQT2W23

Connection to a TV

≥The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize

your system setting.

≥This system supports the PCM and the Dolby Digital bitstream input audio. However, for example the system does not support

the DTS bitstream input audio.

≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be

displayed properly.

≥ Please use High Speed HDMI Cables that have the HDMI

logo (as shown on the cover). It is recommended that you

use Panasonic’s HDMI cable. When outputting 1080p signal,

please use HDMI cables 5.0 meters or less.

≥ Turn off all equipment before connection.

Recommended part number (High Speed HDMI Cable):

RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),

RP-CDHS50 (5.0 m), etc.

≥ Audio will be output through the system’s speakers when

“Off” is selected in “HDMI Audio Output”. (> 41)

∫ OPTICAL IN

≥ After making the digital audio connection, make settings to

suit the type of audio from your digital equipment (> 32).

∫ HDMI

The HDMI connection supports VIERA Link “HDAVI Control”

(> 33) when used with a compatible Panasonic TV.

Basic connection

VIDEO IN

To enjoy TV audio from this home theatre

system’s speakers

AUDIO IN

AUDIO OUT

Connect the TV and the main unit with the

Audio cable (not supplied).

Select “AUX” as a source (> 25).





AUX

A Audio cable (not supplied)

VIDEO

OUT

B Video cable (supplied)

VIDEO OUT

Connection for the better audio

VIDEO IN

OPTICAL

OUT

To enjoy TV audio from this home theatre

system’s speakers

AUDIO IN

Connect the TV and the main unit with the

Optical digital audio cable (not supplied).

Select “DIGITAL IN ” or “D-IN” as a source

(> 25).





DIGITAL AUDIO IN

(STB/TV)

OPTICAL

A Video cable (supplied)

VIDEO

OUT

B Optical digital audio cable (not supplied)

OPTICAL

VIDEO OUT

[For[the[United[Kingdom[and[Republic[of[Ireland[

e.g.,

If the TV does not have a VIDEO IN terminal, connect using

a Scart adaptor (Scart—VIDEO IN).

VIDEO IN

Scart adaptor (not supplied)

Video cable (supplied)



VQT2W23



Connection for the best picture and audio

≥It is possible to playback 3D videos by connecting this unit with a 3D compatible TV.

OPTICAL

OUT

AV IN

To enjoy TV audio from this home theatre

system’s speakers

Connect the TV and the main unit with the

Optical digital audio cable (not supplied).

Select “DIGITAL IN” or “D-IN” as a source

(> 25).





DIGITAL AUDIO IN

(STB/TV)

A HDMI cable (not supplied)

OPTICAL

B Optical digital audio cable (not supplied)

≥ For the TV audio, an audio cable (not supplied) can be also

used by connecting the AUX terminal with the AUDIO OUT

terminal on the TV.

OUT

OPTICAL

(ARC)

HDMI AV OUT (ARC)

ARC (Audio Return Channel)

(Available when using an ARC compatible TV)

With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables. Be sure

to connect to the TV’s ARC compatible terminal.

≥Select “ARC” as the audio input source (> 25).

≥Refer to the operating instructions of the TV for the settings to output digital audio.

Connection with Set Top Box, etc.

Refer to the operating instructions of the respective

devices for the optimal connections.

e.g.,

To enjoy TV audio from this home theatre

system’s speakers



Connect the STB and the main unit with the

Optical digital audio cable (not supplied).

Select “DIGITAL IN” or “D-IN” as a source

(> 25).

OPTICAL

OUT



A Optical digital audio cable (not supplied)

B Set Top Box (Cable/Satellite), etc.

DIGITAL AUDIO IN

(STB/TV)

OPTICAL

VQT2W23

Radio antenna connection

Using an indoor antenna



Main unit



(75

)

FM ANT

FM indoor antenna (supplied)

Adhesive tape

Affix this end of the antenna where reception is best.

Using an outdoor antenna

Use outdoor antenna if FM radio reception is poor.

e.g.,

Main unit



(75

)

FM ANT

FM outdoor antenna [Using a TV antenna (not supplied)]

The antenna should be installed by a competent technician.

75 ≠ coaxial cable (not supplied)

Antenna plug adaptor (United Kingdom and Republic of Ireland

only)



≥ Keep the adaptor out of reach of children to prevent swallowing.



Digital transmitter connection

[BTT755[for[Australia[and[New[Zealand]

Do not insert or remove while the home theatre unit is on.

DO NOT

DIGITAL TRANSMITTER

Make sure that the digital transmitter is fully inserted.

Insert fully until you

hear a click.

If the digital transmitter is not fully inserted, the sound may

not be available from the surround speakers.

VQT2W23

Connection to a broadband network

The following services can be used when this unit is connected

to broadband.

For details about connection method, refer to the instructions

supplied with the connected equipment.

≥ Firmware can be updated (> 23)

≥ You can enjoy the BD-Live (> 28)

≥ You can enjoy the VIERA CAST (> 36)

≥ DLNA feature (> 38)

∫ Using LAN (ethernet) cable

∫ Using Wireless LAN Adaptor DY-WL10

(optional)

LAN

DC OUT

500mA

WIRELESS

LAN







LAN Cable [Straight]

(not supplied)

Broadband router, etc.

Internet

Wireless LAN Adaptor

Wireless router (Access point), etc.

Internet

≥ Use shielded LAN cables when connecting to peripheral

devices.

≥ Only the Wireless LAN Adaptor DY-WL10 (optional) can

be used.

≥ Inserting any cable other than a LAN cable in the LAN

terminal can damage the unit.

≥ Read the operating instructions for the Wireless LAN

Adaptor DY-WL10 (optional) thoroughly when using it.

≥ For up to date compatibility information on your Wireless

router (Access Point) refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN

services (Hotspot etc.) provided in airports, stations, cafes

etc.

VQT2W23

STEP 4: AC mains lead connection

\For\the\United\Kingdom\and\Republic\of\Ireland\only\

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.

AC IN

[BTT755[for[Australia[and[New[Zealand]

Wireless system



Main unit

≥ AC mains lead with a ferrite core is

for the wireless system. Do not

use any other AC mains lead

except the supplied one.



AC mains lead (supplied)

To a household mains socket

AC mains lead (supplied)

To a household mains socket

≥ Connect only after all other connections are complete.

≥The main unit consumes a small amount of AC power, even when it is turned off (When the “Quick Start” setting is “Off”: approx.

0.2 W, [BTT755[for[Australia[and[New[Zealand] Wireless system: approx. 0.3 W). In the interest of power conservation, if you will

not be using this unit for a long time, unplug it from the household mains socket.

STEP 5: Preparing the wireless system

[BTT755[for[Australia[and[New[Zealand]

Turn on the wireless system after all connections are complete.

Press [C I, B Í] on the wireless system.

Unit on/off button [C I, B Í]

C I: The wireless system is on.

B Í: The wireless system is off.

WIRELESS LINK

WIRELESS LINK indicator

Red: The wireless system is on and the wireless link is deactivated.

Green: The wireless system is on and the wireless link is activated.

Wireless system

(“ [W] ” is also displayed on the main unit’s display.)

VQT2W23

STEP 6: Easy setup

The Easy setup assists you to make necessary

1 Press [Í].

2 Follow the on-screen instructions and

make the settings with [3, 4, 2, 1] and

press [OK].

settings.

Follow the on-screen prompts to make basic settings for the

system.

Language

Select the language used on menu screen.

TV Aspect

Select the aspect to suit your TV and preference.

Wireless System

If a digital transmitter is inserted,

it is required to specify the current settings.

Speakers position

Specify the positioning of the surround speakers.

Speaker check

Check if the connection to each speaker is valid.

Speaker Output

Make surround sound setting for speaker output.

TV Audio

Select the audio input connection from your TV,

[item with “(TV)”].

Quick Start

Speed of startup from standby mode is increased.

Preparation

3 Press [OK] several times to finish the “Easy

setup”.

≥ Turn on your TV and select the appropriate video input mode

(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to

this unit.

After completing “Easy setup”, you can perform “Network Easy

Setting”.

≥ You can perform this setup anytime by selecting “Easy setup” in the Setup

menu. (> 42)

≥ Language and TV Aspect settings are automatically retrieved if this unit is

connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later

via an HDMI cable.

VQT2W23

Press [RETURN] and then press [OK].

Then select an item on the following screen which

corresponds to the authentication type noted down in step

1 (> left).

Network Easy Setting

Select “Wired” or “Wireless” and press [OK].

Access Point Connection Setting

Select authentication type.

Network Easy Setting (Connection Test)

Select a connection mode.

Current setting

Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired”.

WPA2-PSK (AES/TKIP)

WPA-PSK (AES/TKIP)

Open/Shared Key (WEP)

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL10) to the USB

port and select “Wireless”.

Open system

Wired

Wireless

RETURN

Follow the on-screen instructions to make the settings.

≥ Input your encryption key code in “Encryption Key”

supplied with your Wireless router (Access point).

∫ “Wired” connection

Follow the on-screen instructions to make your connection settings.

≥ When you experience problems (> right)

*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) may

have the mark.

∫ “Wireless” connection

*2 An SSID (Service Set IDentification) is a name used by wireless LAN to

identify a particular network. Transmission is possible if the SSID

matches for both devices.

If you select “Wireless” and “Wireless LAN Adaptor is not

connected.” is displayed, check that the Wireless LAN Adaptor

is fully inserted. Alternatively, disconnect and reconnect it. If

there is still no change in the display, consult your dealer for

advice.

When you experience

problems with settings

Select “WPS (PUSH button)” or “Search for

access point” and then follow the on-screen

instructions and make the settings.

Access Point Connection Setting

Failed to connect to the access point.

A conflict with other devices occurred.

Select a connection method for access to

Wireless LAN.

Please refer to the operating instructions of

the access point about connection methods.

Do you wish to setup Access Point

Connection Setting again ?

WPS (PUSH button)

Search for access point

Yes

WPS (PUSH button):

e.g.,

If your Wireless router (Access point)

supports WPS (PUSH button), you can

easily perform the settings by pressing

WPS button on it.

Display

Check the following

A conflict with other

devices occurred.

≥ Please wait a few moments,

and then try again.

WPS (Wi-Fi Protected Setup) is a

standard that facilitates settings relating

to the connection and security of

wireless LAN devices.

≥ Setting of the Wireless

router (Access point) for

MAC Address etc.

≥ The signal may be weak.

Using the USB extension

cable supplied with the

Wireless LAN Adaptor,

adjust the position of the

Wireless LAN Adaptor.

≥ The SSID and the

encryption key of the

Wireless router (Access

point).

≥ Please wait a few moments,

and then try again.

A time out error occurred.

Press WPS button or corresponding button of Wireless

router (Access point) until the lamp starts flashing.

≥ For details, refer to the operating instruction of Wireless

router (Access point).

Press [OK].

Search for access point:

Available Wireless routers (Access points) are searched and

listed. You can select the one to use from the list.

An authentication error or a

time out error occurred.

Press [3, 4] to select SSID*²of Wireless router (Access

point) you want to connect with. Then press [OPTION] to

show information of the selected router, make a note of the

authentication and encryption type.

≥ Connection of Wireless LAN

Adaptor

Access Point Connection Setting

Select an access point to connect with.

To search for access point again, please

select "Search again" below.

A device error occurred.

If there is no improvement in

symptom, consult your

dealer.

SSID

Reception

XXXXXXXXXX

SSID

:XXXXXXXXXXXXXXX

:802.11n/g/b (2.4GHz)

:WPA-PSK

XXXXXXXXXX

Wireless type

XXXXXXXXXX

Authentication type

XXXXXXXXXX

XXXXXX

yption type

:AES

XXXXXXXXXX

Search again

VQT2W23

≥ If you can not find the SSID*², select “Search again”.

Network Easy Setting (Connection Test)

Complete.

≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. (> 42)

≥ You can redo these settings individually using “Network Settings”. (> 42)

≥ Do not use this device to connect to any wireless network for which

you do not have usage rights.

1. LAN cable connection

: Fail

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again.

During automatic search in a wireless network environment, wireless

networks (SSID) for which you do not have usage rights may be displayed;

however, using these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings (encryption level,

etc.) of the Wireless router (Access point) might change. When you have

trouble getting online on your PC, perform the network settings of your PC

in accordance with the settings of Wireless router (Access point).

≥ Please be aware that connecting to a network without encryption may

result in the content of the communication being illegitimately viewed by a

third party, or the leaking of data such as personal or secret information.

Select “No” and press [OK] to finish Network

Easy Setting.

Yes

Check the

following

Display

1. LAN cable connection or

Connection to access point

≥ Connectionof

the LAN

:Fail

cables (> 19)

2. IP address setting

:Fail

Firmware updating

3. Connection to gateway

Occasionally, Panasonic may release updated firmware for this

unit that may add or improve the way a feature operates.

These updates are available free of charge.

1. LAN cable connection or

Connection to access point

≥ Connection

and settings

of the hub

and router

≥ Settings of

“IP Address /

DNS

:Pass

2. IP address setting

:Fail

This unit is capable of checking the firmware automatically

when connected to the Internet via a broadband connection.

When a new firmware version is available, the following screen

is displayed.

3. Connection to gateway

1. LAN cable connection or

Connection to access point

:Pass

Settings”

:Home

network

(> 42)

The latest firmware is available.

Please update firmware in Setup.

2. IP address setting

available

To update the firmware

3. Connection to gateway

:Fail

Press [START] > select “To Others” > [OK] > select

“Setup” > [OK] > select “General” > [OK] > select

“Firmware Update” > [OK] > select “Update Now”

1. LAN cable connection or

Connection to access point

:Pass

2. IP address setting

:Pass

:Fail

If downloading on this unit fails or this unit is not connected to

the Internet, then you can download the latest firmware from

the following website and burn it to a CD-R to update the

firmware.

3. Connection to gateway

Network Easy Setting (Internet Connection Test)

http://panasonic.jp/support/global/cs/

(This site is in English only.)

Network Easy Setting (Internet Connection Test)

Complete.

- Connection to the Internet

Fail(B019)

To show the firmware version on this unit. (> 42, “System

Information”)

Failed the connection test.

Cannot find the server.(B019)

Please refer to the operating instructions for the cause

of the error and the countermeasure for it.

Press [OK].

DO NOT DISCONNECT the unit from the AC power or perform

any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the

unit’s display. Unit will restart and the following screen will be

displayed.

Display

Check the following

The firmware has been updated.

Current Installed Version:x.xx

≥ “Primary DNS” and “Secondary

DNS” settings of “IP Address /

DNS Settings” (> 42)

Cannot find the server.

(B019)

RETURN

≥ The server may be busy or the

service may have been

Failed to connect to

the server.

(B020)

suspended. Please wait a few

moments, and then try again.

≥ Settings of “Proxy Server

Settings” (> 42) and the router

≥ Downloading will require several minutes. It may take longer or may not

work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic

Update Check” to “Off”. (> 42)

VQT2W23

STEP 7:

Reprogramming the

Inserting or removing

media

remote control

When other Panasonic products respond to this

remote control

Change “Remote Control” (> 42) on the main unit and the

remote control (the two must match) if you place other

Panasonic products close together and it responds to this

remote control.

SD CARD

To change the code on the main unit.

1 While stopped, press [START].

2 Press [3, 4] to select “To Others” and

press [OK].

3 Press [3, 4] to select “Setup” and press

[OK].

≥ When inserting a media item, ensure that it is facing the right

way up.

≥ While the reading indicator is displayed, do not turn off the

unit or remove the media. Such action may result in loss of

the media’s contents.

4 Press [3, 4] to select “General” and press

[OK].

5 Press [3, 4] to select “Remote Control”

≥ When removing the SD card, press on the centre of the card

and pull it straight out.

and press [OK].

6 Press [3, 4] to select the code (1 or 2) and

press [OK].

∫ To switch sources

Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or

“USB”.

To change the code on the remote control.

≥ If media is inserted while the unit is stopped, the source

switches automatically depending on the inserted media.

While pressing [OK]

Press and hold the number button (1 or 2),

which has the same number you selected in

the step 6 for more than 5 seconds.

2 Press [OK].

VQT2W23

Playlists:

You can play playlists created on

DVD-VR.

START menu

Major functions of this unit can be operated from the START

menu.

To Others

Setup: (> 39)

Card Management: (> 28)

1 Press [START].

2 Press [3, 4] to select the item and press

To exit the screen

Press [START].

[OK].

e.g., BD-Video

∫ Selecting the source by the remote control

Home Cinema

START

BD-Video

Playback

Button

BD/SD

Source

Top Menu

BD/DVD or SD card (SD) (> 27)

Network

iPod (IPOD) (> 34)

iPod

Input Selection

Sound(Equalizer)

To Others

FM Radio (FM) (> 31)

USB device (USB) (> 27)

RADIO

EXT-IN

RETURN

To enjoy sound from the TV (> 32)

AUX^*1

ARC^*1

DIGITAL IN^*1(D-IN)

Playback

Play back the contents.

Viewing Picture

To enjoy sound from other devices (> 32)

Top Menu

(> 27)

DIGITAL IN^*2(D-IN)

*1 “(TV)” is displayed next to items set for TV AUDIO

(> 27)

input.

*2 “(CABLE/SATELLITE)” is displayed next to

DIGITAL IN when set for CABLE/SATELLITE

AUDIO input.

Home

Network

(DLNA)

(> 38)

Network

Internet

Content

Displays the Home screen of the

VIERA CAST (> 36)

≥ Items to be displayed may vary with the media.

≥ When the selector is switched, it may take time to playback the selected

video and/or audio.

Switches to each source

BD/DVD/CD

SD card

iPod

FM Radio:

To enjoy the FM radio (> 31)

USB device

To enjoy sound from the TV

(> 32)

AUX^*1:

When using an Audio cable

ARC^*1:

When using an HDMI cable

(Available when using an ARC

compatible TV)

Input Selection

DIGITAL IN^*1:

When using an Optical digital

audio cable

To enjoy sound from other

devices (> 32)

DIGITAL IN^*2:

When using an Optical digital

audio cable

*1 “(TV)” is displayed next to items set

for TV AUDIO input.

*2 “(CABLE/SATELLITE)” is displayed

next to DIGITAL IN when set for

CABLE/SATELLITE AUDIO input.

Sound(Equalizer)

(> 26)

VQT2W23

Press [3] (increase) or [4] (decrease) to adjust the

speaker level for each speaker.

s6 dB to r6 dB

Enjoying sound effects

from all speakers

∫ Changing the sound modes

Press [SOUND] several times to select the mode.

≥ The selected mode will only be displayed on the main

unit.

Enjoying surround sound

effects

While the selected mode is displayed

Press [2, 1] and select the desired setting.

EQUALIZER

You can select sound quality settings.

FLAT

Cancel (no effect is added).

HEAVY

Adds punch to rock.

CLEAR

Clarifies higher sounds.

SOFT

For background music.

1 Press [SURROUND] several times to select

the effect.

STANDARD

Sound is output as it was recorded/encoded.

Speaker output varies depending on the source.

MULTI-CHANNEL

You can enjoy sound from the front speakers, as well as

the surround even when playing a 2-channel sound or

non-surround sound.

SUBWOOFER LEVEL

MANUAL

You can adjust the amount of base.

1 (Weakest effect) to 4 (Strongest effect)

≥The setting you make is retained, and recalled every

time you play the same type of source.

H.BASS

You can enhance low-frequency sound so that heavy

bass sound can be heard clearly, even if the acoustics of

your room are not optimal.

≥ The selected effect will only be displayed on the main

unit.

2 While “MANUAL” is displayed, press

[2, 1] and select the desired effect.

DOLBY PRO LOGIC II MOVIE

Suitable for movie software, or the one recorded in Dolby

Surround.

(except DivX)

≥The setting you make is retained, and recalled every

time you play from the same type of source.

CENTER FOCUS

(Effective when playing audio containing centre

channel sound.)

You can make the sound of the centre speaker seem like

it is coming from within the TV.

WHISPER-MODE SURROUND

You can enhance the surround effect for low volume

sound. (Convenient for late night viewing.)

DOLBY PRO LOGIC II MUSIC

Adds 5.1-channel effects to stereo sources.

(except DivX)

7.1CH VIRTUAL SURROUND

You can enjoy 6.1/7.1-channel surround-like effect using

5.1-channel speakers.

SUPER SURROUND

You can enjoy sound from all speakers with stereo

sources.

≥ The sound effects/modes may not be available or have no effect with some

sources.

≥ You may experience a reduction in sound quality when these sound

effects/modes are used with some sources. If this occurs, turn the sound

effects/modes off.

2CH STEREO

You can play any source in stereo. Sound will be output to

the front speakers and the subwoofer only.

∫ Adjusting speaker level during play

Press and hold [jCH SELECT] to activate the speaker

setting mode.

Press [jCH SELECT] several times to select the speaker.

Each time you press the button:

L R C RSRB* LB*LS SW



* When the optional surround back speakers are connected.

L R: Front speaker

(left and right: only the balance is adjustable.)

≥Press [2, 1] to adjust the balance of the front

speakers.

C: Centre speaker

RS: Surround speaker (right)

RB*: Surround back speaker (right)

LB*: Surround back speaker (left)

LS: Surround speaker (left)

SW: Subwoofer

≥ The channels not included in the playing audio will not

be displayed (subwoofer is displayed even if it is not

included).

VQT2W23

Playback

Other operations during play

Playing video contents

[BD] [DVD] [CD] [SD] [USB]

These functions may not work depending on the media and

contents.

Preparation

Stop

Turn on the television and select the appropriate video input on

the television.

Press [∫ STOP].

The stopped position is memorised.

1 Press [Í] to turn on the unit.

Resume play function

2 Insert the media.

Press [1 PLAY] to restart from this position.

≥ The position is cleared if the tray is opened or you press

[∫ STOP] several times to display “STOP” on the unit’s

display.

≥ On BD-Video discs including BD-J (> 52), the resume

play function does not work.

Play starts.

≥ If the menu is displayed, press [3, 4, 2, 1] to select

the item and press [OK].

≥ When a message screen is displayed while playing back

3D compatible video software, play back in accordance

with the instructions.

≥ If play does not start, press [1 PLAY].

Pause

∫ To show menus

You can display Top Menu, DIRECT NAVIGATOR or Pop-up

Press [;PAUSE].

≥ Press [;PAUSE] again or [1 PLAY] to restart play.

Menu.

Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP

MENU].

≥ Press [3, 4, 2, 1] to select the item and press [OK].

Search/Slow-motion

≥ Pop-up menu also appears by pressing [OPTION] and

selecting “Pop-up Menu”.

While playing, press [SEARCH6] or [SEARCH5].

≥ Music and MP3: The speed is fixed to a single step.

Slow-motion

While paused, press [SEARCH6] or [SEARCH5].

≥ BD-Video and AVCHD: Forward direction [SEARCH5]

only.

∫ To show the status messages

While playing, press [STATUS].

The status messages give you information about what is

currently being played. Each time you press [STATUS], the

information displayed will change.

The speed increases up to 5 steps.

≥ Press [1 PLAY] to revert to normal playback speed.

e.g. BD-Video

T: Title, C: Chapter, PL: Playlist

Elapsed time in the title

Skip

While playing or paused, press [SKIP:] or [SKIP9].

Skip to the title, chapter or track you want to play.

≥ Each press increases the number of skips.

 T1 C1 0:05.14

BD-Video

0:20.52

PLAY

≥ DivX: Backward direction [SKIP:] only.

Current position

Total time

Frame-by-frame

≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output

as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC

Contents Output” for NTSC discs. (> 40)

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press

[∫ STOP] when you have finished playback to protect the unit’s motor,

your television screen and so on.

While paused, press [2] (2;) or [1] (;1).

≥ Press and hold to change in succession forward or

backward.

≥ Press [1 PLAY] to revert to normal playback speed.

≥ BD-Video and AVCHD: Forward direction [1] (;1) only.

≥ Depending on media and contents, the display may change or may not

appear.

≥ DivX: Successive play is not possible.

≥ When a menu is displayed at the time a 1080/60p (1920k1080/60

progressive) video recorded by a Panasonic digital high-definition video

camera is played back, select “Play Video (AVCHD)”.

≥ It is not possible to playback AVCHD and MPEG2 video which have been

dragged and dropped, copied and pasted to the media.

Changing audio

Press [AUDIO].

You can change the audio channel number or soundtrack

language (> 50), etc.

VQT2W23

To turn on/off secondary audio

Press [DISPLAY].

Useful functions

Press [3, 4] to select the “Disc” menu and press [1].

Press [3, 4] to select the “Signal Type” menu and press

[OK].

Press [3, 4] to select the “Soundtrack” under “Secondary

Video” menu and press [1].

Press [3, 4] to select the “On” or “Off”.

When “On” is selected, press [1] and then press [3, 4] to

select the language.

1 Press [OPTION].

2 Select an item and press [OK].

While DIRECT NAVIGATOR screen is displayed

To display the titles properties (recording

date, etc.).

Properties

Press [RETURN] to exit.

Chapter

To select the chapter.

View

To Picture

Folder

Playing still pictures (> 30).

To switch to another folder.

To select the title.

≥ During search/slow-motion or frame-by-frame, only the primary video is

displayed.

≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,

secondary audio will not be played (> 40).

View Titles

While playing

Enjoying BD-Live discs with

Internet

When black bars are shown at the top and

bottom or left and right sides of the screen,

you can enlarge the image to fill the screen.

Screen

Aspect

Top Menu

To display Top Menu.

To display Pop-up Menu.

To display Menu.

Some BD-Live content available on the Blu-ray discs may

require an Internet account to be created in order to access the

BD-Live content. Follow the screen display or instruction

manual of the disc for information on acquiring an account.

Pop-up

≥ Depending on the played contents if you perform “Screen

Aspect”, there may be no effect.

≥ When “TV Aspect” (> 41) is set to “4:3” or “4:3 Letterbox”,

the “Zoom” effect in “Screen Aspect” is disabled.

1 Connect to the network. (> 19)

2 Insert an SD card (with 1 GB or more free space).

SD card is used as the local storage (> 52).

3 Insert the disc.

≥ Depending on the media and contents, displayed items are different.

∫ Deleting data/Formatting SD cards

Enjoying BD-Live or

BONUSVIEW in BD-Video

There are various functions in BD-Video that you can enjoy by

copying data to the SD card (Local Storage). If you no longer

need data recorded on the SD card, you can delete data with

the following operation.

What is BONUSVIEW?

BONUSVIEW allows you to enjoy functions such as

picture-in-picture or secondary audio etc.

Insert an SD card.

Press [START].

Press [3, 4] to select “To Others” and press [OK].

Press [3, 4] to select “Card Management” and press

[OK].

Press [3, 4] to select “BD-Video Data Erase” or “Format

SD Card” and press [OK].

What is BD-Live?

In addition to the BONUSVIEW function, BD-Live allows you to

enjoy more functions such as subtitles, exclusive images and

online games by connecting this unit to the Internet.

Card Management

SD CARD

No. of Files

≥ The usable functions and the operating method may vary

with each disc, please refer to the instructions on the disc

and/or visit their website.

Free space 300 MB

BD-Video Data Erase

Format SD Card

Playing picture-in-picture

To turn on/off secondary video

Format this SD Card.

RETURN

Press [PIP].

Press [2, 1] to select “Yes” and press [OK].

Press [2, 1] to select “Start” and press [OK].





≥ To use the above functions, it is recommended that you format the card on

this unit. If the SD card you use is formatted, all data on the card will be

erased. It cannot be recovered.

≥ “BD-Live Internet Access” may need to be changed for certain discs

(> 40).

≥ When discs supporting BD-Live are played back, the player or disc IDs

may be sent to the content provider via the Internet.

Secondary video

Primary video

VQT2W23

Enjoying Blu-ray 3D^TM

Regarding DivX

ABOUT DIVX PLUS^TMHD:

video

DivX^®is a digital video format created by DivX, Inc. This is an

official DivX Certified^®device that plays DivX video, including

DivX Plus^TMHD video (H.264/.MKV) up to 1080p and premium

content. Visit www.divx.com for more information and software

tools to convert your files into DivX video.

[BD]

You can enjoy powerful videos with realistic sensations of the

Blu-ray 3D^TMcompatible video software by connecting this unit

with a High Speed HDMI Cable to a 3D compatible TV.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified^®device must be registered in order to play

DivX Video-on-Demand (VOD) content.

To generate the registration code, locate the DivX VOD section

in the device setup menu.

Go to vod.divx.com with this code to complete the registration

process and learn more about DivX VOD.

≥ Video images of the DivX VOD contents stored on USB

device can be output only through the HDMI output terminal.

Display the unit’s registration code.

The illustration is an image.

(> 42, “DivX Registration” in “General”)

DivX Registration

When playing back a disc that has recorded titles with a 2

screen structure (Side by side) etc. which can be enjoyed in

3D, it will playback in accordance with the 3D settings on the

TV, regardless of the settings mentioned to the table below.

≥ Screen displays, such as Playback menu, will not display

correctly.

You must register this unit to play

protected DivX videos.

The registration code is necessary to

Registration Code: XXXXXXXXXX



Please register at www.divx.com/vod/

Preparation

Connect 3D compatible TV to an HDMI AV OUT terminal of

this unit using a High Speed HDMI Cable, and select HDMI

video input mode on the TV. (> 16, 17)

10 alphanumeric characters

≥ After playing DivX VOD content for the first time, the

registration code is not displayed.

≥ Perform the necessary preparations for the TV.

≥ If you purchase DivX VOD content using a registration code

different from this unit’s code, you will not be able to play this

content.

Method of playback is the same as normal disc playback.

(> 27)

≥ Playback following the instructions displayed on the screen.

Cancel the unit’s registration.

(> 42, “DivX Registration” in “General”)

Press [2, 1] to select “Yes” in “DivX Registration”.

Use the deregistration code to cancel the registration in

www.divx.com.

3D settings

Perform the following settings as necessary.

Regarding DivX VOD content that can only be played a set

number of times

Playback

method for 3D

disc

It is also possible to playback 3D discs

in 2D (conventional video). (> 39)

Some DivX VOD contents can only be played a set number of

times. When you play this content, the number of times already

played and initially playable number of times is displayed.

≥ The remaining number of plays decreases each time a

programme is played. However, when playing from the point

where play was previously stopped, the remaining number of

plays does not decrease due to the resume play function.

If you cannot play back in 3D, change

the settings as required by the

connected TV format. (> 41)

≥ Change the settings for 3D on the

TV also when “Side by side” is

selected.

3D Type

∫ Displaying subtitle text

3D Playback

Message

Hide the 3D viewing warning screen.

(> 39)

You can display subtitle text on the DivX video disc on this unit.

This function has no relation to the subtitles specified in DivX

standard specifications and has no clear standard. The

operation might be different or it may not operate properly

depending on the way the file was made or the state of this unit

(playing, stopped, etc.).

Adjust the pop-up position for the

playback menu or message screen

etc. (> 37)

GraphicDisplay

Level

≥ Please refrain from viewing 3D images if you do not feel well or are

experiencing visual fatigue.

Set “Subtitle” in “Disc” (> 36)

In the event that you experience dizziness, nausea, or other discomfort

while viewing 3D images, discontinue use and rest your eyes.

≥ Depending on the connected TV, the video being played back might switch

to 2D video due to changes in resolution etc. Check the 3D setting on the

TV.

≥ DivX video files that do not display “Text” do not contain subtitle text.

≥ If the subtitles text is not displayed correctly, try changing the language

settings. (> 40)

≥ You may not display subtitle text depending on a file.

≥ 3D video might not output the way it is set in “HDMI Video Format” or “24p

Output” (> 41).

VQT2W23

Playing still pictures

Useful functions

[BD] [DVD] [CD] [SD] [USB]

(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,

USB device)

1 Press [OPTION].

2 Select an item, then press [OK].

While “Album View” or “Picture View” screen is displayed

1 Insert a disc, SD card or USB device.

If the menu is displayed, press [3, 4] to select the item

and press [OK].

Start

Slideshow

You can display still pictures one by one at a

constant interval.

Display Interval

Change the display interval.

Transition Effect

2 BD-RE, DVD-RAM

Press [3, 4, 2, 1] to select the album and

press [OK].

Set display method.

Album View

DIRECT NAVIGATOR

DVD-RAM(VR)

Repeat Play

Picture

Video

Repeat slideshow.

Soundtrack

106_DVD

Total 8

2006 9 12

Total 13

Music files on an iPod/iPhone or a music CD

or USB device can be played back as

background music during the slideshow.

Soundtrack Folder

Slideshow

Setting







Slideshow Page 02/02

Video

Picture

A folder to play back can be selected when a

USB device with recorded MP3 is connected

to this unit.

RETURN

OPTION

Press OK to go to Picture View.

3 Press [3, 4, 2, 1] to select the still

Press [3, 4, 2, 1] to select “Set” and

press [OK].

picture and press [OK].

Picture View

DIRECT NAVIGATOR

DVD-RAM(VR)

Picture

Video

To switch to another higher folder.

≥ Only if there is a multiple number of higher

folders recognizable.

Select

Folder

2006 9 12

0002

0001

0005

0009

0003

0007

0004

0006

0008

Folder

To select the still pictures in another folder.

To Video

Playing video contents (> 27).

Page 001/001

Play

To album

view

OPTION

RETURN

To display album view.

Press [2, 1] to display the previous or next still picture.

While playing (except for slideshow)

To exit the screen

Press [TOP MENU/DIRECT NAVIGATOR].

Rotate

RIGHT

Rotate the still picture.

∫ To show the picture properties

Rotate LEFT

While playing, press [STATUS] twice.

Reduce the still picture.

≥ This function is only available for

small-sized still pictures.

e.g. JPEG on DVD-RAM

Shooting date

Zoom out

Zoom in

Cancel “Zoom out”.

Date 11.12.2007

Total

3/9

To exit the screen

Press [STATUS].

≥ Depending on the media and contents, displayed items are different.

≥ When a still picture with large number of pixels is played, the display

interval may become longer. Even if the setting is changed, the display

interval may not become shorter.

≥ When a music CD, a USB device with MP3 recorded and an iPod/iPhone

are inserted/connected to this unit, iPod/iPhone has a priority to be played

back as background music.

VQT2W23

Radio

Playing music

[DVD] [CD] [USB]

Listening to the Radio

Presetting stations

automatically

(DVD-R/-R DL, music CD, CD-R/RW, USB device)

1 Insert a disc or USB device.

If the menu is displayed, press [3, 4] to select the item

and press [OK].

Up to 30 stations can be set.

1 Press [RADIO] to select “FM”.

2 Press [3, 4] to select the track and press

2 Press [STATUS] to select the position to

[OK].

start the auto preset search.

LOWEST:

0.09

4.30

Music list

DIRECT NAVIGATOR

To begin auto preset with the lowest frequency (FM87.50).

CURRENT:

To begin auto preset with the current frequency.*

*To change the frequency, refer to “Presetting stations

manually”.

Track1

5 Tracks / Total Play Time 20min54sec

No.

Track Name

Play Time

4min30sec

3min41sec

4min30sec

3min11sec

5min 2sec

Track1

Track2

Track3

Track4

Track5

3 Press and hold [OK].

Release the button when “AUTO” is displayed.

Play

RETURN

The tuner starts to preset all the stations it can receive into

the channels in ascending order.

“

” indicates the track currently playing.

≥ “SET OK” is displayed when the stations are set, and the radio tunes to the

last preset station.

≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset

the stations manually.

∫ Playing a track in another folder

While the “Music list” is displayed

Press [OPTION].

Press [3, 4] to select “Select Folder” and press [OK].

Presetting stations manually

≥ You cannot select folders that contain no compatible tracks.

Preparation

Select a radio broadcast.

Press [RADIO] to select “FM”.

Press [SEARCH6] or [SEARCH5] to select the

frequency.

≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]

until the frequency starts scrolling. Tuning stops when a station is found.

While listening to the radio broadcast

Press [OK].

While “P” is flashing on the display

Press the number buttons to select a

channel.

To select a 1-digit number

e.g., 1: [1] B [OK].

To select a 2-digit number

e.g., 12: [1] B [2]

≥ A station previously stored is overwritten when another station is stored in

the same channel preset.

VQT2W23

Enjoying TV with unit’s

speakers

Preparation

Listening/confirming the preset

channels

1 Press [RADIO] to select “FM”.

Turn on your TV and select the appropriate audio input mode

[AUX, ARC, D-IN] to suit the connections to this unit. (> 25)

2 Press the number buttons to select the

channel.

To select a 1-digit number

e.g., 1: [1] B [OK].

To select a 2-digit number

e.g., 12: [1] B [2].

Surround sound effects

You can enhance stereo sources with surround sound effect.

Alternatively, press [W, X] or [2, 1].

1 Press [SURROUND] several times to select

the effect.

While “MANUAL” is displayed on the unit’s display

RDS broadcasting

Press [2, 1] and select the desired effect.

[For[the[United[Kingdom[and[Republic[of[Ireland[

Surround modes to enjoy TV audio or stereo

sources from all speakers:

If the station you are listening to is transmitting RDS signals,

“RDS” will light up on the display.

While listening to the radio broadcast

≥ DOLBY PRO LOGIC II MOVIE

≥ DOLBY PRO LOGIC II MUSIC

≥ SUPER SURROUND

Press [DISPLAY] to display the text data.

For more detailed information on this operation, please refer to

the “Enjoying surround sound effects” section on page 26.

PS: Programme service

PTY: Programme type

OFF: Frequency display

Sound modes

PTY displays

NEWS

AFFAIRS

INFO

VARIED

POP M

FINANCE

CHILDREN

SOCIAL A

RELIGION

PHONE IN

TRAVEL

COUNTRY

NATIONAL

OLDIES

You can adjust the mode depending on the source or situation.

1 Press [SOUND] several times to select the

mode.

ROCK M

M.O.R. M*

LIGHT M

CLASSICS

OTHER M

WEATHER

SPORT

FOLK M

While the selected mode is displayed on the unit’s

display

EDUCATE

DRAMA

CULTURE

SCIENCE

DOCUMENT

TEST

Press [2, 1] and select the desired setting.

For more detailed information on this operation, please refer to

the “Changing the sound modes” section on page 26.

LEISURE

JAZZ

ALARM

Selecting the type of audio

from the DIGITAL AUDIO IN

terminal

* M.O.R. M=Middle of the road music

∫ Display on the main unit

TUNED/STEREO:

Displayed when receiving stereo broadcasting

TUNED:

1 Press [EXT-IN] several times to select

“D-IN” (DIGITAL IN).

Displayed when receiving monaural broadcasting or monaural

sound is selected.

2 Press [AUDIO] several times to select the

type.

∫ If noise is excessive

Press [AUDIO] to display “MONO”.

M1rM2 (stereo audio)

(Only works with Dolby Dual Mono)

≥ “M1” or “M2” is not available if “On” is selected in “Digital

Audio Input”. (> 40)

The sound becomes monaural.

Press the button again to cancel the mode. “AUTO

STEREO” will be displayed on the main unit. Depending on

the broadcast system, stereo or monaural will be selected.

“MONO” is also cancelled when you change the frequency.

≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not

output from the HDMI AV OUT terminal.

≥ This setting can be preset for each broadcasting station.

VQT2W23

Linked operations with

the TV

One touch play

You can turn on this unit and the TV, and start play with a

single press of a button.

While the unit and the TV are in standby mode;

Press [1 PLAY].

(VIERA Link “HDAVI Control^TM”)

Speaker Selection

What is VIERA Link “HDAVI Control”?

VIERA Link “HDAVI Control” is a convenient function

that offers linked operations of this unit, and a

Panasonic TV (VIERA) under “HDAVI Control”.

You can use this function by connecting the equipment

with an HDMI cable. See the operating instructions for

connected equipment for operational details.

You can select whether audio is output from the unit’s

speakers or the TV speakers by using the TV menu settings.

Home Cinema

This unit’s speakers are active.

≥ When this unit is in standby mode, changing the TV

speakers to this unit’s speakers in the TV menu will

automatically turn the unit on and select, “AUX”*², “ARC”*^1,*²

or “D-IN” (DIGITAL IN)*²as the source.

≥ You can control the volume setting using the volume or mute

button on the TV’s remote control.

Preparation

Set “VIERA Link” to “On” (> 41).

(The default setting is “On”.)

Set the “HDAVI Control” operations on the connected

equipment (e.g., TV).

Turn on all “HDAVI Control” compatible equipment and

select this unit’s input channel on the connected TV so that

the “HDAVI Control” function works properly.

Also when the connection or settings are changed,

repeat this procedure.

≥ If you turn off this unit, TV speakers will be automatically

activated.

TV speakers are active.

≥ The volume of this unit is set to “0”.

≥ Audio output is 2-channel audio.

Setting the audio link

≥ When switching between this unit’s speakers and TV speakers, the TV

screen may be blank for several seconds.

≥ The audio from “AUX”, “DIGITAL IN”, “FM Radio” or “iPod” will be output

from this unit's speakers even though the TV speakers are selected.

∫ Setting the audio link with the TV

With the remote control;

≥ Select the actual TV audio connection on the main unit.

Automatic input switching

(Power on link)

Press [START] and press [3, 4] to select “To Others” and

press [OK].

Press [3, 4] to select “Setup” and press [OK].

Press [3, 4] to select “TV / Device Connection” and press

[OK].

When the following operations are performed, the television

will automatically switch the input channel and display the

corresponding action. When the television is off, the television

will automatically turn on.

jWhen play starts on the unit

jWhen an action that uses the display screen is performed

(e.g., DIRECT NAVIGATOR screen)

Press [3, 4] to select “TV Audio Input”.

Press [2, 1] to switch “AUX”, “ARC” or “DIGITAL IN”.

≥ Select “AUX” or “ARC”*¹in “TV Audio Input” when the

DIGITAL AUDIO IN terminal is used for the STB

connection.

Whenever the connection or settings are changed, reconfirm

the points above.

[For[the[United[Kingdom[and[Republic[of[Ireland[

jBD-Video, DVD-Video:

When playback stops, the TV will automatically return to TV

tuner mode.

∫ Setting the audio link with the STB

With the remote control;

≥ Select the STB input channel on the TV.

≥

When you switch the TV input to TV tuner mode, this unit will

automatically switch to “AUX”*², “ARC”*^1,*²or “D-IN” (DIGITAL

Press [EXT-IN] to select “D-IN”.

Press [STATUS] to select “CABLE/SATELLITE AUDIO

ON”.

IN)*²

≥ This function does not work when the iPod/iPhone selector is

chosen. (> 35)

≥ If the input channel of the STB on the TV is changed or if you

want to change the device allocated for the linked

operations, select “CABLE/SATELLITE AUDIO OFF” in step

2 above and then repeat steps 1 to 2.

*1 The selection works only when using an ARC compatible TV.

*2 “AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the

audio link”.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC (Consumer

Electronics Control), is a unique function that we have developed and

added. As such, its operation with other manufacturers’ equipment that

supports HDMI CEC cannot be guaranteed.

≥ This unit supports “HDAVI Control 5” function.

“HDAVI Control 5” is the newest standard (current as of December, 2009)

for Panasonic’s HDAVI Control compatible equipment. This standard is

compatible with Panasonic’s conventional HDAVI equipment.

≥ Please refer to individual manuals for other manufacturers’ equipment

supporting VIERA Link function.

VQT2W23

Other devices

Using the iPod/iPhone

Automatic lip-sync function

(for HDAVI Control 3 or later)

iPod/iPhone Connection

Delay between audio and video is automatically adjusted,

enabling you to enjoy smooth audio for the picture.(> 40,

“Audio Delay”)

≥ This function works only when “BD/DVD”, “SD”, “USB”,

“AUX”*², “ARC”*^1,*²or “D-IN” (DIGITAL IN)*²is selected as

the source on this unit.

Preparation

≥ Before connecting/disconnecting the iPod/iPhone, turn the

main unit off or reduce the volume of the main unit to its

minimum.

≥ Make sure that the video cable connection is made to view

photos/videos from the iPod/iPhone.

*1 The selection works only when using an ARC compatible TV.

*2 “AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the

audio link”.

1 Push # to open the iPod/iPhone lid.

2 Connect the iPod/iPhone (not supplied)

firmly.

Power Off Link

iPod/iPhone

All connected equipment compatible with “HDAVI Control”,

including this unit, automatically turns off when you switch the

television off.



Playing music continuously even after turning off the TV

(When the unit is connected to a Panasonic TV (VIERA) that

supports HDAVI Control 2 or later.)

Main unit



Select “Video” in “Power Off Link” (> 41)

Dock adapter (not supplied)

≥ Attach the dock adapter until firmly fitting into the

dock. The adapter should be supplied with your

iPod/iPhone for the stable use.

If you need an adapter, consult your iPod/iPhone

dealer.

Easy control only with VIERA

remote control

Only TV supports “HDAVI Control 2” or later

By using the TV remote control, you can play discs using the

“Control Panel” and display the Top Menu or Pop-up Menu,

etc.

≥ This works only during “BD/DVD”, “SD” or “USB” playback

and resume modes.

Dock for iPod/iPhone

About recharging the battery

≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.

≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone

charging in main unit standby mode.

≥ Once fully recharged, additional recharging will not occur.

1 Press [OPTION].

Compatible iPod/iPhone (as of June 2010)

≥ Compatibility depends on the software version of your iPod/iPhone.

e.g. BD-Video

Control Panel

Name

Memory size

32 GB, 64 GB

8 GB, 16 GB

8 GB, 16 GB, 32 GB

120 GB, 160 GB (2009)

8 GB, 16 GB

160 GB (2007)

8 GB, 16 GB, 32 GB

4 GB, 8 GB

iPod touch 3rd generation

iPod nano 5th generation (video camera)

iPod touch 2nd generation

iPod classic

Screen Aspect

Top Menu

Pop-up Menu

iPod nano 4th generation (video)

iPod classic

RETURN

OPTION

iPod touch 1st generation

iPod nano 3rd generation (video)

iPod classic

2 Select an item, then press [OK].

80 GB

iPod nano 2nd generation (aluminum)

iPod 5th generation (video)

iPod nano 1st generation

iPod 4th generation (colour display)

iPod 4th generation

2 GB, 4 GB, 8 GB

60 GB, 80 GB

30 GB

≥ The OPTION menu may not appear while the Top Menu for

BD-Video or DVD-Video is displayed.

1 GB, 2 GB, 4 GB

40 GB, 60 GB

20 GB, 30 GB

40 GB

≥ The buttons that you can use for this unit vary depending on the TV. For

details, refer to the operating instructions of the TV.

≥ The operation of this unit may be interrupted when you press incompatible

buttons on the TV remote control.

≥ Depending on the menu, some button operations cannot be performed

from the TV’s remote control.

iPod 4th generation

20 GB

iPod mini

4 GB, 6 GB

iPhone 3GS

16 GB, 32 GB

8 GB, 16 GB

4 GB, 8 GB, 16 GB

iPhone 3G

iPhone

VQT2W23

Other methods of playback

iPod/iPhone Playback

Preparation

1 Press [START].

≥ Make sure that the “IPOD” source is selected. Press [iPod] to

select the source.

2 Press [3, 4] to select “Menu” and then

≥ To view photos/videos from the iPod/iPhone

Operate the iPod/iPhone menu to make the appropriate

photo/video output settings for your TV.

≥ To display the picture, turn on the TV and select the

appropriate video input mode.

press [OK].

3 Press [3, 4] to select “Play Mode” and

then press [OK].

4 Press [3, 4] to select an item and press

[OK].

Enjoy music/video

Shuffle (For music playback only.)

Songs:

Play all songs on iPod/iPhone in random order.

Albums:

Play all songs on an album in random order.

1 Press [iPod] to select “IPOD”.

2 Press [STATUS] several times to select the

music menu or videos menu.

Repeat

3 Press [3, 4] to select an item and press

One:

Play a single song/video repeatedly.

All:

[OK].

≥ Repeat this step until the selected title starts playback.

Play all songs/videos from selected items (e.g., Playlists,

Albums, etc.) repeatedly.

≥ Press [2, 1] to display the previous or next page.

e.g., music playback screen

5 Press [3, 4] to select the setting and press

iPod

[OK].

Good morning

Ronaldo

Happy days

1:00

-2:30

≥ The setting of the playback mode will be kept until changes are made on

the same iPod/iPhone.

≥ This function does not work when “Use iPod display (All)” is selected.

45 of 1230

Shuffle (Albums)

Repeat (All)

To exit, press [TOP MENU/DIRECT NAVIGATOR].

Enjoy photos

Basic controls

(For music and video playback only)

Buttons

[1 PLAY]

Functions

Play

1 Press [iPod] to select “IPOD”.

[∫ STOP]

2 Press [STATUS] several times to select

Pause

“ALL” on the unit’s display.

[;PAUSE]

3 Switch the TV input to video in.

[SKIP:,

SKIP9]

Skip

4 Play a slideshow on your iPod/iPhone.

The picture will be displayed on your TV.

(Press and hold)

[SEARCH6,

SEARCH5]

To use the iPod touch/iPhone features

Press the Home button on the iPod touch/iPhone.

Select the iPod touch/iPhone features on the touch screen

to operate.

≥ Surround sound effect and sound mode are available (> 26).

You can use the remote control to operate the iPod/iPhone

menu.

The operation may vary among iPod/iPhone models.

≥ [3, 4]: To navigate menu items

≥ [OK]: To go to the next menu.

≥ [RETURN]: To return to the previous menu.

VQT2W23

Advanced operations

Playback menu

Enjoying VIERA CAST

You can access a selection of Internet services from the Home

screen with VIERA CAST, for example YouTube, Picasa Web

Albums. (Current as of June 2010)

1 Press [BD/SD] to select “BD/DVD”.

2 Press [DISPLAY].

e.g., BD-Video

Preparation

≥ Network connection (> 19)

≥ Network setting (> 22)

Disc

Play

Picture

Sound

Signal Type

Off

Main

Angle

1ENG

Subtitle

Subtitle Style

1 Press [VIERA CAST].

Menus

Items

Settings

Message is displayed. Please read these instructions

carefully and then press [OK].

3 Press [3, 4] to select the menu and press

[1].

2 Press [3, 4, 2, 1] to select the item and

4 Press [3, 4, 2, 1] to select the item and

press [OK].

press [1].

Operable buttons:

[3, 4, 2, 1], [OK], [RETURN], coloured buttons, number

buttons

5 Press [3, 4] to select the setting.

Some items can be changed by pressing [OK].

To exit the screen

VIERA CAST Home screen;

Press [DISPLAY].

Weather

London, United Kingdom

Setup

Help

Depending on the condition of the unit (playing, stopped,

etc.) and media contents, there may be some items that

you cannot select or change.

NW 10

km/h

12°

TOMORROW

19°

12°

XXXXXX

Regarding Language, Audio attribute and Video attribute:

(> 50)

Featured Photos

Featured Videos

BACK

XXXXXX

COMING SOON

Disc

Images are for illustration purposes,

contents may change without notice.

Signal Type

Primary Video

To return to VIERA CAST Home screen

Press [VIERA CAST].

To exit from VIERA CAST

Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].

≥ When the Blu-ray disc logo is selected on the Home screen,

the playback source will be changed and go back to the

source previously selected.

The recording method of original video

appears.

Video

Soundtrack Select the type of audio or language.

Secondary Video

Select on/off of images. The recording

Video

method of original video appears.

Soundtrack Select on/off of audio and the language.

≥ In the following cases, settings are possible using “Internet Content

Settings” (> 42)

– When restricting the use of VIERA CAST.

– When the audio is distorted.

– When wrong time is displayed

Video

The recording method of original video appears.

≥ If using slow Internet connection, the video may not be displayed correctly.

A high-speed Internet service with a speed of at least 6 Mbps is

recommended.

≥ Be sure to update the firmware when a firmware update notice is displayed

on the screen. If the firmware is not updated, you will not be able to use the

VIERA CAST function. (> 23)

Soundtrack

Show or change the soundtrack.

Subtitle

Turn the subtitle on/off, and change the language depending

on the media.

≥ VIERA CAST home screen is subject to change without notice.

≥ The services through VIERA CAST are operated by their respective

service providers, and service may be discontinued either temporarily or

permanently without notice. Therefore, Panasonic will make no warranty

for the content or the continuity of the services.

≥ All features of websites or content of the service may not be available.

≥ Some content may be inappropriate for some viewers.

≥ Some content may only be available for specific countries and may be

presented in specific languages.

Subtitle Style

Select the subtitle style.

Audio channel

Select the audio channel number.

(> 27, “Changing audio”)

Angle

Select the number of the angle.

Some items may be changed only on the disc specific menu.

(> 27)

VQT2W23

Play

Sound

Sound Effects^{*1, *2}

Repeat Play

(Only when the elapsed time is being displayed on the unit’s

display.)

Select the item which you want to repeat. The items displayed

differ depending on the type of media.

(Discs recorded at 48 kHz or less)

This feature gives you brighter sound by increasing the high

frequency portion of the audio.

Re-master 1

Re-master 2

Re-master 3

Pop and rock

Jazz

Select “Off” to cancel.

Classical

Random

Select whether or not to play random.

Dialog Enhancer^*1

The volume of the centre channel is raised to make dialog

easier to hear.

Graphic Display Level

(Only when “Full HD” is selected in “3D Type” (> 41).)

Pop-up position for the play back menu or message screen

etc. can be adjusted during 3D playback.

High Clarity Sound

When connected to TV via the HDMI AV OUT terminal for

outputting image, it produces clearer sound.

≥ Only when you have selected “Enable” in “High Clarity

Sound” (> 40)

Picture

Mode

*1 When audio is output from the HDMI AV OUT terminal this function is

effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/

DTS-HD” is set to “PCM”. (> 40)

Select the picture quality mode during play.

*2 This function has no effect when the type of audio is Dolby Pro Logic II.

Detail Clarity

The picture is sharp and detailed.

Progressive

Select the method of conversion for progressive output to suit

the type of material being played.

≥ If the video is disrupted when “Auto” is selected, select either

“Video” or “Film” depending on the material to be played

back.

24p

Movies and other material recorded on DVD-Video at 24p are

output at 24p.

≥ Only when you have selected “On” in “24p Output” (> 41)

and play discs recorded at a rate of 60 fields per second.

VQT2W23

DLNA feature

You can enjoy music, video and pictures contents saved on a

DLNA Certified media server (such as a PC with Windows 7

installed etc.) connected to the home network with this unit.

You also can enjoy viewing them with Panasonic DLNA

compatible recorders (DIGA).

Enjoy contents on the

equipment connected to this

unit via the network

1 Press [START].

2 Press [3, 4] to select “Network” and press

≥ The countries where DIGA is available are limited. Refer to

following site for availability.

[OK].

http://panasonic.jp/support/global/cs/

3 Press [3, 4] to select “Home Network

(DLNA)” and press [OK].

≥ A list of equipment connected via the network is

displayed.

≥ For the operation of equipment connected to the network,

refer to their respective operating instructions.

≥ Not compatible with certain audio, video and image files.

≥ This list can be updated by pressing the red button on

the remote control.

Preparation

Perform network connection (> 19) and network setting

e.g.

(> 22) of this unit.

Home Network (DLNA)

Perform Home Network settings of the PC or DIGA.

DIGA

PC name

When connected to a PC with Windows 7 installed

≥ Add the contents and folder to the libraries of PC.

≥ Playlist of Windows Media^®Player can play back only

the contents that are stored in the libraries.

Regarding setting method of Windows 7, refer to its

instructions or help.

RETURN

Servers found on the network are displayed.

Please select one.

Update

When connected to a Panasonic DLNA compatible

recorder (DIGA)

4 Press [3, 4] to select the equipment to

playback the contents, and press [OK].

When a message requesting operation of the equipment to

be registered is displayed, perform the operations in steps

1-4 of “Enjoy contents on the equipment connected to this

unit via the network” (> right).

5 Press [3, 4, 2, 1] to select the item to

playback (folder), and press [OK].

≥ Menu structure will be different depending on the

equipment connected to this unit. Select the contents by

repeating the operation.

≥ Control Panel is displayed once the playback starts.

Operation can be performed with [3, 4, 2, 1], [OK]

and [EXIT].

Control Panel

e.g.



EXIT

≥ Press [OK] if the Control Panel is not displayed.

≥ Press [RETURN] to hide the Control Panel.



≥ Depending on the equipment, playback of pictures may not be possible.

≥ Items displayed in grey on the display cannot be played back by this unit.

≥ This unit cannot be played back via connected equipment.

≥ Depending on the performance of the connected PC, video frames may be

dropped during playback, or video may not playback at all.





Broadband router, Wireless router (Access point), etc.

LAN Cable (Straight)

Internet

DLNA Certified media server

VQT2W23

Setup menu

Useful functions for when

playing back pictures

Change the unit’s settings if necessary. The settings remain

intact even if you switch the unit to standby.

The following operations are possible when playing back

pictures from connected equipment.

1 Press [START] and press [3, 4] to select

“To Others” and press [OK].

While contents list is displayed

Press [OPTION].

Select an item, then press [OK].

2 Press [3, 4] to select “Setup” and press

[OK].

Start

Slideshow

You can display still pictures one by one at a

constant interval.

Setup

Disc

Picture

Interval

Sound

Change the display interval.

Repeat Play

Repeat slideshow.

Display

TV / Device Connection

Network

General

Slideshow

Settings

RETURN

Press [3, 4, 2, 1] to select “Set” and

press [OK].

3 Press [3, 4] to select the menu and press

[OK].

While playing

4 Press [3, 4] to select the item and press

[OK].

Press [OPTION].

≥ If OPTION menu is not displayed, press [OPTION]

again.

If there are any other items, repeat these steps.

Select an item, then press [OK].

5 Press [3, 4, 2, 1] to select the option and

press [OK].

Status

Rotate

RIGHT

(except for

slideshow)

Show the picture properties (> 30).

≥ There may be differences in operation methods. If this

happens, follow the on-screen instructions for the operation.

About the password

Rotate the still picture.

The password of the following items are common.

Don’t forget your password.

≥ “DVD-Video Ratings”

Rotate LEFT

(except for

slideshow)

≥ “BD-Video Ratings”

≥ “Lock” (> 42)

Disc

DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

≥ Follow the on-screen instructions. Enter the 4-digit password

with the number buttons when the password screen is

shown.

BD-Video Ratings

Set an age limit of BD-Video play.

≥ Follow the on-screen instructions. Enter the 4-digit password

with the number buttons when the password screen is

shown.

Playback method for 3D disc

Select the playback method of 3D compatible video software.

3D Playback Message

Set to display or hide the 3D viewing warning screen when

playing back the 3D compatible video software.

VQT2W23

Sound

Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc

will be selected.

≥ Enter a code (> 50) with the number buttons when you

select “Other ¢¢¢¢”.

Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥ “Auto” is effective only when playing Dolby TrueHD.

Subtitle Preference

Choose the language for the subtitle.

Digital Audio Output

Press [OK] to show the following settings:

≥ If “Automatic” is selected and the language selected for

“Soundtrack Preference” is not available, subtitles of that

language will automatically appear if available on that disc.

≥ Enter a code (> 50) with the number buttons when you

select “Other ¢¢¢¢”.

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

MPEG Audio

Select the audio signal to output.

≥ Select “PCM” when the connected equipment cannot

decode the respective audio format.

≥ Not making the proper settings may result in noise.

Menu Preference

Choose the language for the disc menus.

≥ Enter a code (> 50) with the number buttons when you

select “Other ¢¢¢¢”.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and

secondary audio (including the button click sound). (> 28)

BD-Live Internet Access (> 28)

You can restrict Internet access when BD-Live functions are

≥

If “Off” is selected, the unit outputs the primary audio only.

used.

≥ If “Limit” is selected, Internet access is permitted only for

BD-Live contents which have content owner certificates.

Digital Audio Input

Press [OK] to show the following settings:

DivX Subtitle Text

PCM-Fix

Select the audio signal to input

Select a suitable item according to the language used for DivX

≥ “On”: PCM is available.

subtitles text (> 29).

≥ “Off”: PCM and Dolby Digital are available.

≥ This item is displayed only after playing back a file.

Select “On” if the sound is cut off intermittently.

Picture

Downmix

Select the downmix system to enjoy multi-channel or

2-channel sound.

Still Mode

≥ Select “Surround encoded” to enjoy the surround sound.

≥ There is no downmix effect on the bitstream audio signal.

≥ The audio will be output in “Stereo” in the following cases.

jAVCHD playback

jPlayback of secondary audio (including the button click

sound).

Select the type of picture shown when you pause playback.

Automatic Automatically selects the type of picture shown.

Select if jittering occurs when “Automatic” is

selected.

Field

Select if small text or fine patterns cannot be

Frame

seen clearly when “Automatic” is selected.

7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically expanded

and played back at 7.1ch.

Seamless Play

≥ If “Off” is selected, sound is played over the original number

of channels.

(Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

The chapter segments in playlists are played seamlessly.

≥ Select “On” when the picture freezes for a moment at the

chapters segment in playlists.

Audio reformatting is enabled in the following cases:

≥ When you have selected “PCM” in “Digital Audio Output”.

≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby

TrueHD or LPCM.

NTSC Contents Output

Select PAL60 or NTSC output when playing NTSC discs.

High Clarity Sound

When connected to TV via the HDMI AV OUT terminal for

outputting image, it produces clearer sound.

≥ Set to “Enable” and then set “High Clarity Sound” on the

Playback menu to “On”. (> 37)

Audio Delay

Mis-sync between the video and audio is corrected by delaying

the audio output.

VQT2W23

Speaker

Refer to page 43

is connected to an HDTV through other equipment, it

must also be 1080p compatible.

Display

24p Output

On-Screen Messages

When this unit is connected to a TV supporting 1080/24p

output using an HDMI cable, movies and other material

recorded at 24p are output at 24p.

≥ When playing DVD-Video, set to “On” and then set “24p”

in “Picture” (> 37) to “On”

Choose whether to show status messages automatically.

On-Screen Language

Choose the language for menus and on-screen messages.

≥ When BD-Video images other than 24p are played,

images are output at 60p.

Screen Saver Function

This is to prevent burn-in on the screen.

When this is set to “On”:

HDMI Colour Mode

If there is no operation for 5 minutes or more, the displayed

screen switches to the other states automatically.

≥ While playing and pausing, etc., this function is not available.

≥ While playing music (CD-DA or MP3), after about 5 minutes

DIRECT NAVIGATOR screen switches to a blank screen

with “Screen Saver” message.

This setting is for selecting colour-space conversion of the

image signal when the unit is connected using an HDMI

cable.

HDMI Audio Output

This setting selects whether or not to output audio from

HDMI.

FL Display

≥ Audio will be output through the system's speakers when

“Off” is selected.

Changes the brightness of the unit’s display.

≥ If “Automatic” is selected, the display is dimmed but

brightens when you perform some operations.

VIERA Link

Set to use “HDAVI Control” function when connected with

an HDMI cable to a device that supports “HDAVI Control”.

≥ Select “Off” when you do not want to use “HDAVI

Control”.

Software Licence

Information about the software used by this unit is displayed.

TV / Device Connection

Deep Colour Output

This setting is for selecting whether to use Deep Colour

Output when a television that supports Deep Colour is

connected.

3D Type

Select the format of the connected TV.

≥ Change the settings for 3D on the TV also when “Side by

side” is selected.

Contents Type Flag

Depending on the playback content, the TV will output

adjusting to the optimal method when a TV that supports

this function is connected.

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9

ratio image:

Power Off Link

The sides are cut off so

Select the desired power off link setting of this unit for

VIERA Link operation (> 34). (This works depending on

the settings of the connected VIERA Link “HDAVI Control”

compatible equipment.)

the picture fills the screen.

4:3

When playing BD-Video,

video is output as “4:3

Letterbox”.

Video/Audio:

When the TV is turned off, this unit will turn off

automatically.

Video:

When the TV is turned off, this unit will turn off except

during the following conditions:

Black bands appear at the

top and bottom of the

picture.

4:3 Letterbox

jCD or MP3 audio playback

jiPod/iPhone mode

When connected to a 16:9 widescreen television and playing

4:3 ratio image:

jRadio mode

Video is displayed as a 4:3 ratio image in the

16:9

j“AUX”, “ARC” or “D-IN” (DIGITAL IN) mode

(non-selected TV AUDIO setting for VIERA Link)

j“D-IN” (DIGITAL IN) mode (non-selected CABLE/

SATELLITE AUDIO setting for VIERA Link)

centre of the screen.

HDMI Connection

Press [OK] to show the following settings:

TV Audio Input

Select the TV audio input to work with the VIERA Link

operations.

HDMI Video Format

The items supported by the connected devices are

indicated on the screen as “¢”. When any item without “¢”

is selected, the images may be distorted.

≥ If “Automatic” is selected, automatically selects the

output resolution best suited to the connected television.

≥ To enjoy high-definition video up-converted to 1080p,

you need to connect the unit directly to 1080p

compatible HDTV (High Definition Television). If this unit

VQT2W23

General

TV System

Change the setting to match the equipment you are connecting

with.

Remote Control

Change the remote control code if other Panasonic products

react to this remote control.

≥ When NTSC contents are played, they are outputted in the

signal format specified in the “NTSC Contents Output”,

irrespective of the settings here.

Quick Start*

Network

Speed of startup from standby mode is increased.

≥ Internal control unit will be powered when it is set to “On” so

compared to when the setting is “Off” the following will occur.

jIdle power consumption will increase. (about the power

consumption > 53)

Network Easy Setting (> 22)

Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

*Depending on the power conserving setting activated on the

TV, this function may have less effect when the unit is

started by the power on link function. (> 33)

LAN Connection Mode

Select connection method.

Easy setup (> 21)

You can execute basic settings to optimize your home theatre

system.

Access Point Connection Setting

This allows the Wireless router (Access point) and

connection settings to be set and the current connection

settings and connection state to be checked when a

wireless connection is used.

Default Settings

This returns all values in the Setup menu and the Playback

menu, except for “Remote Control”, “LAN Connection Mode”,

“Access Point Connection Setting”, “IP Address / DNS

Settings”, “Proxy Server Settings”, “Lock”, “DVD-Video

Ratings” and “BD-Video Ratings” etc. to the default settings.

Connection Setting

The Wireless router (Access point) connection wizard

will be displayed.

DivX Registration (> 29)

You need this registration code to purchase and play DivX

IP Address / DNS Settings

This is for checking the state of the network connection

and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

Video-on-Demand (VOD) content.

System Information

≥ “Connection Speed Setting” is enabled only when

“Connection Speed Auto-Config” is turned “Off”.

Display firmware version of this unit and wireless LAN module

of optional Wireless LAN Adaptor.

Firmware Update (> 23)

Proxy Server Settings

Press [OK] to show the following settings.

This is for checking the state of connection with the Proxy

server and performing settings.

Press [OK] to show the respective setting.

Automatic Update Check

When this equipment remains connected to the Internet, it

will check for the latest firmware version when it is turned

on and you can update it if necessary.

Internet Content Settings (> 36) (VIERA CAST)

Press [OK] to show the following settings:

Update Now

You can update the firmware manually.

Lock

You can restrict using VIERA CAST.

≥Follow the on-screen instructions. Enter the 4-digit

password with the number buttons when the password

screen is shown.

Audio Auto Gain Control

Volume that is different depending on the contents is

adjusted automatically to the standard volume while

using the VIERA CAST.

≥Depending on contents, this function effect will not

work.

≥Select “Off” when the audio is warped.

Time Zone

By selecting the time zone, it is possible to set the unit’s

time to match your location.

≥Some VIERA CAST contents require the time zone to

be set. Set the time zone if necessary.

Summer Time

≥Select “On” when using Daylight Saving time.

VQT2W23

MAC Address

Displays the MAC address of this unit.

Surround speakers / Surround back speakers

Speaker settings

Difference

Setting

Delay time (

)

0.0

Approx. 170 cm

Approx. 340 cm

Approx. 510 cm

5.0 ms

10.0 ms

15.0 ms

For optimum listening with 5.1-channel sound, all the

speakers, except for the subwoofer, should be the same

distance from the seating position.

If either distance A or B is less than C (> below), find the

difference in the relevant table and adjust the delay time to

make up for the difference.

∫ When using the 7.1ch speaker system

Check the distance difference of both the front speakers

and the surround back speakers from the seating position.

Set the delay time of the surround back speakers.

Adjusting speaker level

Volume (Channel balance) (

)

(Effective when playing multi-channel audio)

A B C: Primary listening distance

Approximate room dimensions

Actual speaker position

Ideal speaker position

1 Select “Test” and press [OK].

A test signal is output.

Circle of constant primary listening distance

While listening to the test signal

Press [3, 4] to adjust the volume of each

1 Press [3, 4, 2, 1] to select the distance

box ( ^ms) and press [OK].

speaker.

0.0

The volume can be adjusted between r6 dB and s6 dB.

≥ Set each speaker level according to the volume of the

Front (L) and Front (R) speaker volume respectively.

e.g., 5.1ch setting

d₀B

0.0





3 Press [OK].

Complete

Test

d₀B

The test signal stops.

d₀B

0.0

e.g., 5.1ch setting



d₀B

0.0

Complete

Test

d₀B





d₀B

0.0

Centre (C)

Left Surround (LS), Right Surround (RS)

e.g., 7.1ch setting

d₀B

0.0

Complete

Test

Centre (C)

Test

Left Surround (LS), Right Surround (RS)

d₀B

0.0

To finish the speaker setting

Press [3, 4, 2, 1] to select “Complete” and press [OK].

0.0

d₀B



Left Surround back (LB), Right Surround back (RB)

2 Press [3, 4] to select the setting and press

[OK].

Centre speaker

Difference

Setting

1.0 ms

2.0 ms

3.0 ms

4.0 ms

5.0 ms

Approx. 34 cm

Approx. 68 cm

Approx. 102 cm

Approx. 136 cm

Approx. 170 cm

VQT2W23

Optional speaker settings

[BTT755]: Centre speaker

Speaker installation



option







Attaching to a wall

You can attach all of the speakers (except subwoofer) to a

wall.

≥ The wall or pillar on which the speakers are to be attached

should be capable of supporting 10 kg per screw. Consult a

qualified building contractor when attaching the speakers to

a wall. Improper attachment may result in damage to the wall

and speakers.

[BTT350]: Centre speaker



18.8 mm

117 mm

209 mm to 211 mm

97 mm

17 mm

≥ Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

99 mm to 101 mm



1 Drive a screw (not supplied) into the wall.

At least 30 mm

‰ 4.0 mm



‰ 7.0 mm to 9.4 mm

Wall or pillar

5.5 mm to 7.5 mm

∫ To avoid speaker dropping





[BTT755]: Front speaker, Centre speaker, Surround speaker



e.g., [BTT755] Front speaker





2 Fit the speaker securely onto the screw(s)

with the hole(s).





e.g., [BTT755] Front speaker

String (not supplied)

Screw eye (not supplied)

Less than 10 cm

DO NOT



Rear of the speaker

≥ Consult a qualified building contractor to avoid damage to

the wall or speakers.

≥ Use a string of less than ‰ 2.0 mm, which is capable of

supporting over 10 kg.

≥ In this position, the speaker

will likely fall if moved to the

left or right.

≥ Move the speaker so

that the screw is in this

position.

[BTT755]: Front speaker, Surround speaker

Attach to a wall without the base and the stand.





[BTT350]:

Front speaker, Surround speaker



97 mm

210 mm to 212 mm

26 mm

VQT2W23

Reference

You have forgotten your ratings password.

You want to cancel the ratings level.

While the disc tray is empty and “BD/DVD” is selected as a

source, press and hold [SKIP:] on the remote control and

[1] (Play) on the unit at the same time for more than 5

seconds. The ratings level returns to the factory preset.

Troubleshooting guide

Before requesting service, please perform the

following steps.

Do you have the latest firmware installed?

Firmware updates may be released to correct operating

irregularities that are discovered with certain movies. (> 23)

Power

Make the following checks.

No power.

If the problem remains unresolved, consult your

dealer for instructions.

≥ Insert the AC mains lead securely into a household mains

socket. (> 20)

The following do not indicate a problem with this unit:

≥ Regular disc rotating sounds.

≥ Image disturbance during search.

The unit switches to standby mode.

≥ When the time set for the sleep timer has passed, the main

unit will be turned off. (> 8)

≥ One of the unit’s safety devices is activated. Press [Í/I] on

the main unit to turn the unit on.

≥ Image disturbance when replacing 3D discs.

∫ Unit doesn’t respond to remote control or

front panel buttons.

The main unit is turned off when the input for the TV is changed.

≥ This is a normal phenomenon when using VIERA Link

(HDAVI Control 4 or later). For details please read the

operating instructions for the TV.

Press and hold [Í/I] on the main unit for 5 seconds.

jIf still unable to turn the unit off, disconnect the AC mains

lead, wait 1 minute, then reconnect the AC mains lead.

∫ Cannot eject disc.

The unit may have a problem.

Displays

While the unit is off, press and hold [SKIP9] on the remote

control and [< OPEN/CLOSE] on the unit at the same time for

more than 5 seconds.

The display is dim.

≥ Change “FL Display” in the Setup menu. (> 41)

General operation

TV screen and video

To return to the factory preset.

≥ Select “Yes” in “Default Settings” in the Setup menu. (> 42)

The images from this unit do not appear on the TV.

Picture is distorted.

Jittering occurs.

≥ An incorrect resolution is selected in “HDMI Video Format”.

Reset the setting as follows:

While the disc tray is empty and “BD/DVD” is selected as a

source, press and hold [

at the same time for more than 5 seconds to cancel the setting.

≥ When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio

are not output in bitstream, select “Yes” in “Default Settings”

and make proper settings. (> 42)

To return all settings to the factory preset.

≥ Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME], [< OPEN/

CLOSE] and [Í/I] on the main unit at the same time for more

than 5 seconds.

1] (Play) and [∫] (Stop) on the main unit

The remote control doesn’t work properly.

≥ The remote control and main unit are using different codes.

Change the code on the remote control. (> 24)

It may be necessary to set the code of the remote control again

after changing the batteries for the remote control. ( 24)

≥ The unit and television are using different video systems.

While stopped, keep pressing [∫] (Stop) and [< OPEN/

CLOSE] on the main unit for 5 or more seconds. The system

switches from PAL to NTSC or vice versa.

≥

Disc cannot be played.

≥ The disc is dirty. (> 7)

≥ Check the region code.

≥ The system used on the disc doesn’t match your television.

PAL discs cannot be correctly viewed on an NTSC television.

This unit can convert NTSC signals to PAL60 for viewing on

a PAL television (“NTSC Contents Output” in the “Picture”).

≥ When “Playback method for 3D disc” in the Setup menu is

set to “3D Playback”, images may not output depending on

the connection method. Remove the disc from this unit and

select “2D Playback”.(> 39)

Still pictures (JPEG) do not playback normally.

≥ The images that were edited on the PC, such as Progressive

JPEG, etc., may not playback.

The TV tuner mode is not displayed when the TV is

switched on.

When playing back a 3D disc, audio can be heard but no

video image on the TV.

≥ Change the video input mode to the suitable HDMI video

input mode on the TV.

≥ This phenomenon may occur, depending on the TV setting,

when “Quick Start” is set to “On”.

≥ Depending on the TV, this phenomenon may be prevented

by reconnecting the HDMI cable to a different HDMI input

terminal or by changing the HDMI auto connection setting.

The contents of the USB device cannot be read.

≥ If inserted during playback, the USB device may not be

recognised by this unit.

VQT2W23

Video is not output.

Cannot switch audio.

≥ Set the “High Clarity Sound” in the Playback menu to “Off” to

use the VIDEO OUT terminal. (> 37)

≥ When audio is output from the HDMI AV OUT terminal, set

“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or

“MPEG Audio” to “PCM”. (> 40)

Video is not output in high-definition.

≥ Confirm that “HDMI Video Format” in the Setup menu is set

properly. (> 41)

No sound from the TV.

≥ Press [EXT-IN] to select the corresponding source. (> 25)

≥ The ARC (Audio Return Channel) function is not available.

Instead, use an optical digital audio cable or an audio cable

to have the TV sound. (> 16, 17)

3D video is not output.

≥ Are the settings on this unit and the TV correct? (> 17)

≥

If the TV is not ARC compatible and only the HDMI connection

is used, an extra audio connection is necessary ( 16, 17).

3D video is not output correctly as 2D.

≥ If there is no sound from the equipment connected to this

unit’s DIGITAL AUDIO IN terminal, please make sure that

the optical audio output of the equipment is set to PCM.

≥ Is the “Playback method for 3D disc” set to “2D Playback”?

(> 39)

≥ Discs that have recorded titles with Side by side (2 screen

structure) which can be enjoyed in 3D are played back in

accordance with the settings of the TV.

iPod/iPhone operation

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

Cannot charge or operate.

≥ Check that the iPod/iPhone is connected firmly. (> 34)

≥ The battery of the iPod/iPhone is depleted. Charge the iPod/

iPhone, and then operate again.

≥ Confirm the “TV Aspect” is set properly. (> 41)

≥ Adjust the aspect setting on the television.

(Adjustment using “Screen Aspect” (> 28) on the unit is also

possible.)

Cannot display iPod/iPhone videos/photos on the TV.

≥ Make sure that TV is connected to the VIDEO OUT terminal

on this unit. (> 16)

≥ Operate the iPod/iPhone menu to make the appropriate

video/photo output settings for your TV. (Refer to operating

instructions for your iPod/iPhone.)

[For[the[United[Kingdom[and[Republic[of[Ireland[

After choosing “Home Cinema” in “Speaker Selection”

with the TV’s remote control, the TV’s input selection also

changes.

≥ Disconnect the HDMI cable from the TV and reconnect it to a

different HDMI IN terminal.

The TV input channel unintentionally changes to HDMI input.

≥ When the main unit is connected with an “HDAVI Control”

compatible TV and VIDEO IN is selected for iPod/iPhone

video or photo playback, the TV input channel will

automatically change to the HDMI input channel when

[START] is pressed.

Sound

No sound.

Low volume.

jRe-select the TV’s VIDEO IN input channel.

Distorted sound.

Cannot hear the desired audio type.

≥ Check connections to speakers and other equipment. (> 12,

13,15s20)

Radio

Distorted sound or noise is heard.

≥ Adjust the position of the antenna.

≥ Use an outdoor antenna. (> 18)

≥

Ensure the speaker settings for your speakers are correct. (

To output audio from a device connected with an HDMI cable,

set “HDMI Audio Output” to “On” in the Setup menu. ( 41)

43)

≥ When “BD-Video Secondary Audio” is set to “On”, Dolby

TrueHD, Dolby Digital Plus, DTS-HD Master Audio and

DTS-HD High Resolution Audio are output as Dolby Digital

or DTS Digital Surround.

A beat sound is heard.

≥ Try to keep a certain amount of distance between the

antenna and the TV.

≥ Re-master will not work when the bitstream signal is output

from the HDMI AV OUT terminal. (> 37)

≥ Depending on the connected equipment, the sound may be

distorted if this unit is connected with an HDMI cable.

≥ The multi-channel audio from a device connected to the TV

is not output in it’s original multi-channel form.

jIf the device has an optical audio output terminal, connect

the device to this unit’s “OPTICAL” terminal. (> 17, 32)

No surround sound.

≥ Press [SURROUND] to select a surround effect. (> 26)

≥ [BTT755[for[Australia[and[New[Zealand]

Ensure that the surround selector switch is set in the centre

position. Then, turn the wireless system off and then back

on.

≥ (When using the 7.1ch speaker system)

Audio is not available from the surround back speakers even

though Dolby Pro Logic II turns on.

VQT2W23

Other difficulties with playback

Wireless system (SH-FX71)

[BTT755[for[Australia[and[New[Zealand]

BD-Video or DVD-Video is not played.

≥ Ensure the disc is for the correct BD-Video region code or

DVD-Video region number, and is not defective. (> 11)

≥ You have set a ratings level to limit BD-Video or DVD-Video

play. Change this setting. (> 39)

No power.

≥ Ensure the AC mains lead of the wireless system is

connected properly.

≥ Some BD-Video can only be output with HDMI.

The wireless link indicator (e.g., “ [W] ”) is flashing.

≥ There is no link between the main unit and the wireless

system. Turn the wireless system off and then back on.

Alternatively, turn the wireless system off, disconnect the AC

mains lead and then reconnect it.

I can’t play back BD-Live.

≥ The SD card is write-protected. (> 11)

≥

Confirm that this unit is connected to the broadband Internet. (

19)

≥ Confirm the “BD-Live Internet Access” settings. (> 40)

≥ Confirm an SD Card is inserted into the SD Card slot. (> 24)

The wireless link indicator (e.g., “ [W] ”) does not light.

≥ Check that the main unit is turned on, and the wireless

system is turned on.

≥ Ensure that the digital transmitter is fully inserted into the slot

of the main unit. (> 18)

Alternative soundtrack and subtitles cannot be selected.

≥ The languages are not recorded on the disc.

≥ You may not be able to use the playback menu to change the

soundtrack and subtitles on some discs. Use the disc’s

menus to make changes. (> 27)

The wireless link indicator keeps flashing between red and

green.

≥ There is a power supply problem. Consult the dealer.

Angle cannot be changed.

≥ Angles can only be changed during scenes where different

angles are recorded.

Network

I can’t connect to the network.

≥ Confirm the network connection and settings. (> 19, 42)

≥ Check the operating instructions for each device and

connect accordingly.

When using Wireless LAN connection, video or audio from the

DLNA Certified media server is played back intermittently, not

played back or video frames are dropped during playback.

≥

Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz)

Wireless router (Access Point) may solve the problem. If you use

802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is

necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at

2.4 GHz may result in connection interruptions or other problems.

On the “Access Point Connection Setting” screen (

42), the

continuous lighting of at least 4 “Reception” indicators is the

target for a stable connection. If 3 or fewer indicators are lit or

the connection is being interrupted, change the position or angle

of your Wireless router (Access point) and see if the connection

state improves. If there is no improvement, connect to a wired

network and perform the “Network Easy Setting” (

22) again.

The contents of the USB device cannot be read.

≥ USB devices connected using USB extension cable other

than the supplied with the Wireless LAN Adaptor DY-WL10

(optional) or a USB hub may not be recognised by this unit.

VQT2W23

HDMI ONLY

Messages

≥ Some BD-Video discs can only be output with HDMI.

The following messages or service numbers appear on the

television or unit’s display when something unusual is detected

during startup and use.

NET

≥ Displays while VIERA CAST is starting up.

No PLAY

On the television

≥ There is a viewing restriction on a BD-Video or DVD-Video.

(> 39)

Cannot play.

≥ You inserted an incompatible disc.

No READ

≥ The media is dirty or badly scratched. The unit cannot play.

Cannot play on this unit.

≥ You tried to play a non-compatible image.

PLEASE WAIT

≥ The unit is carrying out internal process. This is not a

malfunction. You cannot operate the unit while “PLEASE

WAIT” is displayed.

No disc is inserted.

≥ The disc may be upside down.

$ This operation is not available.

REMOVE

≥ Some operations are unsupported by the unit. For example;

jBD-Video: During playback, reverse slow-motion or

reverse frame-by-frame is not possible.

≥ The USB device is drawing too much power. Remove the

USB device.

SET 

IP address is not set.

(“  ” stands for a number.)

≥ The “IP Address” in “IP Address / DNS Settings” is “---. ---.

---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address acquisition if

necessary.)

≥ The remote control and main unit are using different codes.

Change the code on the remote control. (> 24)

H or F

(“  ” stands for a number.)

≥ Check and correct the speaker cable connections.

≥ There is something unusual.

≥ Check the unit using the troubleshooting guide. If the service

number does not disappear, do the following.

(When using the optional wireless LAN adaptor: DY-WL10)

The current security setting of Wireless LAN is low. It is

recommended to change the setting.

≥ Authentication type for the Wireless LAN is set to “Open

system”, or the encryption type is set to “No encryption”. It is

recommended to encrypt for safety reasons. For details,

refer to the instructions of the Wireless router being used.

Encryption is required when playing back video, etc., from

DLNA compatible devices.

Disconnect the plug from the household mains socket, wait

a few seconds, then reconnect it.

Press [Í/I] to turn the unit on.

If the service number does not disappear despite doing the

above, request service from the dealer. Inform the dealer of

the service number when requesting service.

No Video

≥ Depending on the connected iPod/iPhone, video menu may

not be available on the TV. Select “ALL” on the unit’s display

and operate video playback from your iPod/iPhone menu.

(> 35)

UPD/

(“  ” stands for a number.)

≥ The firmware is being updated.

Please do not turn off the unit.

On the unit’s display

[BTT755[for[Australia[and[New[Zealand] “[W]” is flashing.

≥ There is no link between this unit and the wireless system.

Check that the wireless system is plugged into the

household mains socket and is turned on.

≥ Ensure that the digital transmitter is fully inserted into the slot

of this unit.

F99

≥ The unit fails to operate properly. Press [Í/I] on the main

unit to switch the unit to standby for 3 seconds. Now press

[Í/I] on the main unit again to turn the unit on.

≥ If the wireless system is not used, disconnect the digital

transmitter from this unit.

U59

≥ The unit is hot.

The unit switches to standby for safety reasons. Wait for

about 30 minutes until the message disappears.

Select a position with good ventilation when installing the

unit. Do not block the ventilation hole on the rear and side of

the unit.

IPOD OVER CURRENT ERROR

≥ The iPod/iPhone is drawing too much power. Remove the

iPod/iPhone, and turn the unit off and on again.

START

≥ The system is being restarted during the firmware update.

Please do not turn the unit off.

U72

U73

≥ The HDMI connection acts unusually.

jTurn the unit and TV off.

FINISH

≥ The firmware update is completed.

jDisconnect the HDMI cable between the player and the

TV.

VQT2W23

NOT CONDITIONAL

≥ The requested operation cannot be conducted.

About MP3/JPEG/DivX/

AVCHD/MPEG2 files

Subtitles text file of DivX

File format

MicroDVD, SubRip, or TMPlayer

Files must have the extension “.SRT”,

“.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”

Extension

MP3

≥ The DivX video file and subtitles text file

are inside the same folder, and the file

names are the same except for the file

extensions.

File format

Extension

MP3

Files must have the extension “.mp3” or “.MP3”.

Compression rate 32 kbps to 320 kbps

≥ Depending on the methods used to

create the file or the state of the

recording, only parts of the subtitles may

be displayed, or the subtitles may not be

displayed at all.

Sampling rate 44.1 kHz/48 kHz

Reference

ID3 tags: version 1, 2.2, 2.3, 2.4

Reference

(Only titles and the names of artists)

≥ If a file extension is “.mkv” or “.MKV”, you

can not display the subtitle text.

JPEG

File format

Extension

JPEG

AVCHD

Files must have the extension “.jpg” or “.JPG”.

Picture

between 34k34 and 8192k8192 pixels

AVCHD format (V1.0) used on High

Definition Video Camera

(Panasonic and some others)

resolution

(sub sampling is 4:2:2 or 4:2:0)

JPEG conforming DCF* is supported.

≥ MOTION JPEG and Progressive JPEG is

not supported.

File format

Reference

Codec

MPEG-4 AVC/H.264

≥ Discs must conform to UDF 2.5.

* Design rule for Camera File system: unified standard

established by Japan Electronics and Information

Technology Industries Association (JEITA).

≥ DVD-RAM must conform to UDF 2.0.

MPEG2

≥ BD-RE must conform to UDF 2.5.

SD-Video format* used on Standard

DivX

File format

Codec

Definition Video Camera

(Panasonic and some others)

MPEG2

File format

Extension*

DivX

* SD-Video Entertainment Video Profile

Files must have the extension “.DIVX”,

“.divx”, “.AVI” or “.avi”

Picture resolution Up to 1920k1080 pixels

≥ With certain recording states and folder structures, the play order may

differ or playback may not be possible.

≥ CD-R, CD-RW: ISO9660 level 1 or 2 (except for extended formats), Joliet

This unit is compatible with multi-session.

≥ DivX certified to play DivX video up to HD

1080p, including premium content.

Video

This unit is not compatible with packet writing.

jNumber of stream: Up to 1

jCodec*: MPEG-4 SP (Simple Profile),

MPEG-4 ASP (Advanced Simple Profile)

jFPS (Frame Per Second)*: Up to 60 fps

Audio

jNumber of stream: Up to 8

jFormat*: MP3, MPEG, Dolby Digital

jMulti channel: Dolby Digital is possible.

MPEG multi is 2 ch conversion.

GMC (Global Motion Compensation) is not supported.

≥ DVD-R, DVD-R DL (except for AVCHD): ISO9660 level 1 or 2 (except for

extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)

This unit is not compatible with multi-session.

This unit is not compatible with packet writing.

Reference

Structure of folders that can be

played in this unit

You can play files on this unit by structure of folders as

shown below. However depending on the method of

writing data (writing software), play may not be in the

order you numbered the folders.

≥

* The following (DivX Plus HD) is added to the above DivX

specification.

Extension

Video Codec: MPEG-4 AVC/H.264

FPS (Frame Per Second):

From 320k240 to 1920k1080: 30 fps

Specifically at 1280k720: 60 fps

Audio Format: MP3, MPEG, Dolby Digital, AAC

“.MKV” or “.mkv”

: Folder which can be displayed with this unit

¢¢¢: Numbers

XXX: Letters

*1 ¢¢¢: from 001 to 999

*2 ¢¢¢: from 100 to 999

XXXXX: 5 figures

*3 ¢¢¢¢: from 0001 to 9999

XXXX: 4 figures

≥ This unit supports DivX files less than 4 GB in a USB

device.

≥ DVD-R and DVD-R DL must conform to UDF 1.02 without

ISO9660 and UDF 1.5 with ISO9660.

VQT2W23

≥ BD-R must conform to UDF 2.5.

(Continued on next page)

Structures of still picture (JPEG) folders

Supplemental information

∫ Display languages list

in DVD-R*⁴/DVD-R DL*⁴/

Root

CD-R*⁵/CD-RW*⁵

P0000001.jpg

P0000002.jpg

e.g.,

Files inside a folder are

displayed in the order they

were updated or taken.

Folder A

P0000003.jpg

P0000004.jpg

P0000005.jpg

Display Language Display Language Display Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

JPN

CHI

Japanese

Chinese

Korean

Malay

ARA

HIN

Arabic

Hindi

Folder B

German

Italian

KOR

MAL

VIE

PER

IND

Persian

Indonesian

Maori

P0000006.jpg

P0000007.jpg

P0000008.jpg

P0000009.jpg

Spanish

Dutch

Vietnamese

Thai

MRI

BUL

RUM

GRE

TUR

THA

POL

CES

SLK

HUN

FIN

Bulgarian

Romanian

Greek

Folder C

Swedish

Norwegian

Danish

Polish

P0000010.jpg

P0000011.jpg

P0000012.jpg

Czech

Slovak

Turkish

Others

Portuguese

Russian

Hungarian

Finnish

in BD-RE*⁶/DVD-RAM*⁴

e.g., Folder structure is not

displayed.

Root

P0000001.jpg

P0000002.jpg

JPEG

∫ Video attribute

DCIM

XXXXX

Display

Meaning

XXXX.jpg

MPEG-2/MPEG-4 AVC/VC-1

Video recording method

DCIM

∫ Audio attribute

XXXXX

XXXX.jpg

Display

Meaning

LPCM/

Digital/

Digital+/

in SD card*⁴/USB

Root

Signal type

TrueHD/DTS/DTS-ES Mtrx/

DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/

DTS-HD HI RES/DTS-HD MSTR/MPEG

e.g.,

device*⁴

P0000001.jpg

P0000002.jpg

Displays JPEG files in all

folders.

Folder structure is not

displayed.

ch (channel)

k (kHz)

Number of channels

Sampling frequency

Number of bits

DCIM

XXXXX

XXXX.jpg

b (bit)

∫ Language code list

Folder A

P0000003.jpg

Language Code Language Code Language Code

P0000004.jpg

Abkhazian

Afar:

6566 Gujarati:

6565 Hausa:

6570 Hebrew:

8381 Hindi:

7185 Rhaeto-Romance:

7265

8277

Afrikaans:

Albanian:

7387 Romanian:

7273 Russian:

7285 Samoan:

7383 Sanskrit:

8279

8285

8377

8365

Structure of MP3 folders

Amharic

Arabic:

6577 Hungarian:

6582 Icelandic:

7289 Indonesian:

6583 Interlingua:

6589 Irish:

Root

in DVD-R/DVD-R DL/CD-R/

CD-RW/USB device

Prefix the file names with

3-digit numbers in the order

you want to play them.

001XXXX.mp3

002XXXX.mp3

e.g.,

Armenian:

Assamese:

Aymara:

7378 Scots Gaelic: 7168

7365 Serbian:

8382

001

Folder A

003XXXX.mp3

004XXXX.mp3

005XXXX.mp3

7165 Serbo-Croatian: 8372

Azerbaijani:

Bashkir:

Basque:

6590 Italian:

7384 Shona:

7465 Sindhi:

8378

8368

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

6665 Japanese:

6985 Javanese:

Kannada:

7487 Singhalese:

7578 Slovak:

7583 Slovenian:

7575 Somali:

7589 Spanish:

7579 Sundanese:

7585 Swahili:

7679 Swedish:

7665 Tagalog:

Folder B

Bengali; Bangla:

006XXXX.mp3

007XXXX.mp3

008XXXX.mp3

009XXXX.mp3

6678 Kashmiri:

6890 Kazakh:

6672 Kirghiz:

6682 Korean:

6671 Kurdish:

7789 Laotian:

Bhutani:

Bihari:

Folder C

010XXXX.mp3

011XXXX.mp3

012XXXX.mp3

Breton:

Bulgarian:

Burmese:

Byelorussian: 6669 Latin:

Structure of DivX folders

Cambodian:

Catalan:

Chinese:

Corsican:

Croatian:

Czech:

7577 Latvian, Lettish: 7686 Tajik:

6765 Lingala:

9072 Lithuanian:

6779 Macedonian:

7282 Malagasy:

6783 Malay:

7678 Tamil:

in BD-R*⁷/DVD-R*⁷/DVD-R

Root

7684 Tatar:

DL*⁷/CD-R*⁷/CD-RW*⁷/USB

P0000001.divx

P0000002.divx

e.g.,

7775 Telugu:

7771 Thai:

device*⁷

Folder A

Files inside a folder are

displayed in the order they

were updated or taken.

7783 Tibetan:

7776 Tigrinya:

7784 Tonga:

7773 Turkish:

7782 Turkmen:

7779 Twi:

P0000003.divx

P0000004.divx

P0000005.divx

Danish:

Dutch:

English:

Esperanto:

Estonian:

Faroese:

Fiji:

Finnish:

French:

Frisian:

Galician:

Georgian:

German:

Greek:

Greenlandic:

Guarani:

6865 Malayalam:

7876 Maltese:

6978 Maori:

6979 Marathi:

6984 Moldavian:

7079 Mongolian:

7074 Nauru:

7073 Nepali:

7082 Norwegian:

7089 Oriya:

Folder B

P0000006.divx

P0000007.divx

P0000008.divx

P0000009.divx

7778 Ukrainian:

7865 Urdu:

7869 Uzbek:

7879 Vietnamese:

7982 Volapük:

Folder C

P0000010.divx

P0000011.divx

P0000012.divx

*4 The total combined maximum number of recognizable picture contents

and folders: 3000 picture contents and 300 folders.

*5 The total combined maximum number of recognizable picture contents

and folders: 999 picture contents and 99 folders.

*6 The total combined maximum number of recognizable picture contents

and folders: 9999 picture contents and 300 folders.

*7 The total combined maximum number of recognizable file contents and

folders: 200 file contents and 300 folders.

7176 Pashto, Pushto: 8083 Welsh:

7565 Persian:

6869 Polish:

6976 Portuguese:

7576 Punjabi:

7178 Quechua:

7065 Wolof:

8076 Xhosa:

8084 Yiddish:

8065 Yoruba:

8185 Zulu:

VQT2W23

Java and all Java-based trademarks and logos are trademarks or

registered trademarks of Sun Microsystems, Inc. in the United States and

other countries.

This product incorporates the following software:

(1) the software developed independently by or for Panasonic

Corporation,

(2) the software owned by third party and licensed to Panasonic

Corporation,

(3) the software licensed under the GNU General Public License, Version

2 (GPL v2),

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;

5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;

7,333,929; 7,212,872 & other U.S. and worldwide patents issued &

pending.

DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD

Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.

Product includes software.

(4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL v2.1) and/or,

(5) open sourced software other than the software licensed under the

GPL v2 and/or LGPL v2.1

For the software categorized as (3) and (4), please refer to the terms and

conditions of GPL v2 and LGPL v2.1, as the case may be at

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

In addition, the software categorized as (3) and (4) are copyrighted by

several individuals.

This item incorporates copy protection technology that is protected by U.S.

patents and other intellectual property rights of Rovi Corporation. Reverse

engineering and disassembly are prohibited.

Please refer to the copyright notice of those individuals at

http://www.am-linux.jp/dl/JPRCBW98

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

The GPL/LGPL software is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY, without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This product is licensed under the AVC patent portfolio license and VC-1

patent portfolio license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the AVC Standard and

VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video

that was encoded by a consumer engaged in a personal and

non-commercial activity and/or was obtained from a video provider

licensed to provide AVC/VC-1 Video. No license is granted or shall be

implied for any other use. Additional information may be obtained from

MPEG LA, LLC. See http://www.mpegla.com.

At least three (3) years from delivery of products, Panasonic will give to

any third party who contacts us at the contact information provided below,

for a charge no more than our cost of physically performing source code

distribution, a complete machine-readable copy of the corresponding

source code covered under GPL v2/LGPL v2.1.

Contact Information

[email protected]

HDAVI Control^TMis a trademark of Panasonic Corporation.

x.v.Colour^TMis a trademark.

Source code is also freely available to you and any other member of the

public via our website below.

http://www.am-linux.jp/dl/JPRCBW98

VIERA CAST is a trademark of Panasonic Corporation.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation

and Sony Corporation.

SDXC Logo is a trademark of SD-3C, LLC.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

Blu-ray Disc^TM, Blu-ray^TM, Blu-ray 3D^TM, BD-Live^TM, BONUSVIEW^TM, and

the logos are trademarks of Blu-ray Disc Association.

DivX^®, DivX Certified^®, DivX Plus^TMHD and associated logos are

registered trademarks of DivX, Inc. and are used under license.

YouTube and Picasa are trademarks of Google, Inc.

“Made for iPod” and “Made for

iPhone” mean that an

electronic accessory has been

designed to connect

specifically to iPod, or iPhone,

respectively, and has been

certified by the developer to

meet Apple performance

standards.

Apple is not responsible for the operation of this device or its compliance

with safety and regulatory standards.

iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of

Apple Inc., registered in the U.S. and other countries.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service

marks, or certification marks of the Digital Living Network Alliance.

Windows is a registered trademark of Microsoft Corporation in the United

States and other countries.

VQT2W23

Glossary

AVCHD

DTS-HD High Resolution Audio

AVCHD is a new format (standard) for high-definition video

cameras that can be used to record and play high-resolution

HD images.

This is a signal format achieved by improving the previous

DTS, DTS-ES and DTS 96/24 formats. It is compatible with

sampling frequency 96 kHz/48 kHz. BD-Video supports up to

7.1 channel output.

BD-J

Some BD-Video discs contain Java applications, and these

applications are called BD-J. You can enjoy various interactive

features in addition to playing normal video.

DTS-HD Master Audio | Essential

This is a lossless audio format and compatible with 96 kHz/

7.1 ch and 192 kHz/2 ch or less. In addition, faithful

reproduction of the master audio is enabled using lossless

audio encoding technology. BD-Video supports up to

7.1 channel output.

Bitstream

This is the digital form of multi-channel audio data (e.g., 5.1

channel) before it is decoded into its various channels.

Dynamic range

Deep Colour

Dynamic range is the difference between the lowest level of

sound that can be heard above the noise of the equipment and

the highest level of sound before distortion occurs.

Dynamic range compression means reducing the gap between

the loudest and softest sounds. This means you can listen at

low volumes but still hear dialogue clearly.

This unit incorporates HDMI technology that can reproduce

greater colour gradation (4096 steps) when connected to a

compatible TV.

You can enjoy exceptionally rich, natural-looking colours, with

smooth, detailed gradation and minimal colour banding.

[A lower colour gradation (256 steps), without Deep Colour, will

be reproduced if connected to a TV which does not support

Deep Colour.

HDMI (High-Definition Multimedia Interface)

HDMI is a digital interface for consumer electronic products.

Unlike conventional connections, it transmits uncompressed

digital video and audio signals on a single cable.

The unit will automatically set appropriate output to suit the

connected TV.]

DLNA (Digital Living Network Alliance)

DLNA is a standard that makes DLNA Certified digital

electronics easier and more convenient to use on a home

network.

Local storage

This storage area is used as a destination for sub contents for

playing BD-Live on BD-Video.

LPCM (Linear PCM)

These are a kind of PCM format.

These are uncompressed digital signals, similar to those found

on CDs.

Dolby Digital

This is a method of coding digital signals developed by Dolby

Laboratories. Apart from stereo (2-channel) audio, these

signals can also be multi-channel audio.

PCM (Pulse Code Modulation)

This is one format for converting analogue audio into digital

audio, enabling you to enjoy digital audio with no hassle.

Dolby Digital Plus

Multi-channel audio and higher audio quality is made possible

using Dolby Digital Plus. BD-Video supports up to 7.1 channel

output.

P4HD (Pixel Precision Progressive Processing for HD)

This is a processor which makes use of an exclusive

Panasonic algorithm. Various processing is supported,

including a high-level conversion of the TV scanning format

from interlace to progressive and a high-level conversion of

standard resolution (480i or 576i) video signal to a 1080

High-Definition video signal.

Dolby Pro Logic II

Dolby Pro Logic II enables you to play stereo sources on 5.1

channel.

Dolby TrueHD

Consequently, this unit is able to provide video of optimal

resolution to the connected TV.

Dolby TrueHD is a very high quality audio format that

reproduces the studio master audio. BD-Video supports up to

7.1 channel output.

x.v.Colour^TM

x.v.Colour^TMis a name for devices that are compatible with the

xvYCC format, an international standard for expanded colour

in motion pictures, and that follow the rules for signal

transmission.

Down-mixing

This is the process of remixing the multi-channel audio found

on some discs into fewer channels.

You can enjoy vivid colours of wider colour ranges for a more

realistic picture when connected to a TV that supports the

x.v.Colour^TMwith HDMI cable.

DTS (Digital Theater Systems)

This surround system is used in many movie theatres. There is

good separation between the channels, so realistic sound

effects are possible.

24p

This is a progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie contents

are recorded in 24 frames/second in accordance with the film

materials.

DTS-HD

DTS-HD is a high-quality, sophisticated audio format used in

movie theatres. Previous DTS Digital Surround-compatible

equipment can play DTS-HD as DTS Digital Surround audio.

BD-Video supports up to 7.1 channel output.

VQT2W23

Specifications

GENERAL

FM TUNER SECTION

Preset memory:

30 stations

Power consumption:

100 W

Frequency range: 87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals:75 ≠ (unbalanced)

Power consumption in

standby mode

Approx. 0.2 W

Power supply:

AC 220 V to 240 V, 50 Hz

DC OUT 5 V 500 mA MAX

SPEAKER SECTION

iPod/iPhone Connector:

WIRELESS LAN Connector: DC OUT 5 V 500 mA

(USB 2.0 standard)

FRONT SPEAKERS

[BTT755] SB-HF730

Dimensions (WkHkD):

Mass:

430 mmk62 mmk287 mm

Approx. 3.5 kg

Type:

Woofer:

2 WAY 3 SPEAKER Bass-ref.

3.5 cm k 10 cm

(Dimensions and Weight do not

include speakers)

CONE TYPEk 2

Tweeter:

Impedance:

2.5 cm SEMI-DOME TYPE

3 ≠

Operating temperature

range:

0 oC to 40 oC

Output sound pressure: 78 dB/W (1 m)

Operating humidity range: 35 % to 80 % RH

Frequency range:

100 Hz to 30 kHz (j16 dB),

(no condensation)

130 Hz to 25 kHz (j10 dB)

255 mmk1024 mmk255 mm

Approx. 2.3 kg

Dimensions (WkHkD):

Mass:

AMPLIFIER SECTION

[BTT350] SB-HF230

Type:

Full range:

Impedance:

Output sound pressure: 78 dB/W (1 m)

Frequency range:

1 WAY 1 SPEAKER Bass-ref.

6.5 cm CONE TYPE

3 ≠

RMS TTL POWER OUTPUT: 1000 W

1 kHz, 10 % total harmonic distortion

FRONT:

CENTRE:

SURROUND:

125 W per ch (3 ≠)

250 W per ch (6 ≠)

125 W per ch (3 ≠)

105 Hz to 25 kHz (j16 dB),

130 Hz to 22 kHz (j10 dB)

80 mmk118.5 mmk68 mm

Approx. 0.4 kg

100 Hz, 10 % total harmonic distortion

Dimensions (WkHkD):

Mass:

SUBWOOFER:

250 W per ch (6 ≠)

DIN TTL POWER OUTPUT: 590 W

1 kHz, 1.0 % total harmonic distortion

CENTRE SPEAKER

[BTT755] SB-HC730

Type:

FRONT:

90 W per ch (3 ≠)

2 WAY 3 SPEAKER Bass-ref.

3.5 cm k 10 cm

CENTRE:

SURROUND:

115 W per ch (6 ≠)

90 W per ch (3 ≠)

Woofer:

CONE TYPEk 2

2.5 cm SEMI-DOME TYPE

6 ≠

45 Hz to 120 Hz, 1.0 % total harmonic distortion

SUBWOOFER: 115 W per ch (6 ≠)

Tweeter:

Impedance:

Output sound pressure: 78 dB/W (1 m)

Frequency range:

100 Hz to 30 kHz (j16 dB),

130 Hz to 25 kHz (j10 dB)

424 mmk59 mmk76 mm

Approx. 1.06 kg

Dimensions (WkHkD):

Mass:

[BTT350] SB-HC480

Type:

Full range:

Impedance:

1 WAY 1 SPEAKER Bass-ref.

6.5 cm CONE TYPE

6 ≠

Output sound pressure: 79 dB/W (1 m)

Frequency range:

90 Hz to 25 kHz (j16 dB),

115 Hz to 22 kHz (j10 dB)

145 mmk85 mmk71.5 mm

Approx. 0.6 kg

Dimensions (WkHkD):

Mass:

VQT2W23

SURROUND SPEAKERS

[BTT755] SB-HS735

Type:

VIDEO SECTION

2 WAY 3 SPEAKER Bass-ref.

3.5 cm k 10 cm

Woofer:

Signal system:

PAL/NTSC

CONE TYPEk 2

Video output

Tweeter:

Impedance:

Output sound pressure: 78 dB/W (1 m)

Frequency range:

2.5 cm SEMI-DOME TYPE

3 ≠

Output level:

1.0 Vp-p (75 ≠)

Pin jack (1 system)

Output connector:

HDMI AV output

Output format:

Output connector:

100 Hz to 30 kHz (j16 dB),

1080p/1080i/720p/480p

Type A (19 pin)

HDMI (with 3D, ARC, Content

130 Hz to 25 kHz (j10 dB)

255 mmk1024 mmk255 mm

Approx. 2.3 kg

Dimensions (WkHkD):

Mass:

Type)

This unit supports “HDAVI Control

5” function.

[BTT350] SB-HS230

Type:

Full range:

Impedance:

Output sound pressure: 78 dB/W (1 m)

Frequency range:

1 WAY 1 SPEAKER Bass-ref.

6.5 cm CONE TYPE

3 ≠

LASER Specification

Class 1 LASER Product

Wave length:

790 nm (CDs)/655 nm (DVDs)/

405 nm (BDs)

No hazardous radiation is

emitted with the safety

protection

105 Hz to 25 kHz (j16 dB),

Laser power:

130 Hz to 22 kHz (j10 dB)

80 mmk118.5 mmk68 mm

Approx. 0.4 kg

Dimensions (WkHkD):

Mass:

SUBWOOFER

[BTT755] SB-HW330

Type:

WIRELESS SYSTEM AND

DIGITAL TRANSMITTER

1 WAY 1 SPEAKER (Kelton

type)

16 cm CONE TYPE

Woofer:

Passive radiator:

Impedance:

25 cm

6 ≠

[BTT755[for[Australia[and[New[Zealand]

Output sound pressure: 78 dB/W (1 m)

RMS TTL POWER OUTPUT: 250 W

1 kHz, 10 % THD

Frequency range:

35 Hz to 180 Hz (j16 dB),

40 Hz to 160 Hz (j10 dB)

180.5 mmk322 mmk351 mm

Approx. 4.6 kg

Dimensions (WkHkD):

Mass:

SURROUND:

125 W per ch (3 ≠)

DIN TTL POWER OUTPUT: 140 W

1 kHz, 1.0 % THD

[BTT350] SB-HW480

Type:

Woofer:

Impedance:

Output sound pressure: 78 dB/W (1 m)

SURROUND:

70 W per ch (3 ≠)

1 WAY 1 SPEAKER Bass- ref.

16 cm CONE TYPE

6 ≠

Power supply:

AC 220 V to 240 V, 50 Hz

Power consumption

Digital transmitter:

Wireless system:

Power consumption in off

mode:

Frequency range:

40 Hz to 220 Hz (j16 dB),

1.2 W

43 W

45 Hz to 180 Hz (j10 dB)

145 mmk289.5 mmk258 mm

Approx. 2.8 kg

Dimensions (WkHkD):

Mass:

Approx. 0.3 W

Dimensions (WkHkD)

Digital transmitter:

Wireless system:

Mass

43.3 mmk37.3 mmk8.2 mm

165 mmk91.5 mmk164 mm

TERMINAL SECTION

Digital transmitter:

Wireless system:

Wireless module

Frequency range:

No. of channels:

Approx. 0.0095 kg

Approx. 0.695 kg

USB:

(Front)

USB port power:

Bit rate:

(Rear)

USB 2.0 High Speed

DC OUT 5 V 500 mA MAX

Up to 4 Mbps (DivX)

2.4 GHz to 2.4835 GHz

USB 2.0 (Use for Wireless LAN

Adaptor only)

Ethernet:

SD card slot:

10BASE-T/100BASE-TX 1 system

Connector: 1 system

Specifications are subject to change without notice.

Audio Input

AUX:

k 1

Digital Audio Input

Optical:

k 1

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Audio Format: PCM, Dolby Digital

VQT2W23

Index

HDMI. . . . . . . . . . . . . . . . . . . . . . 16, 52

High Clarity Sound . . . . . . . . . . 37, 40

AC mains lead connection. . . . . . . 20

Angle . . . . . . . . . . . . . . . . . . . . . . . . 36

Audio

Radio . . . . . . . . . . . . . . . . . . . . . . . . 31

Random play . . . . . . . . . . . . . . . . . . 37

Re-master. . . . . . . . . . . . . . . . . . . . . 37

Remote control

Remote control code. . . . . . . . . . 24

Using the remote control. . . . . . . . 7

Repeat play . . . . . . . . . . . . . . . . . . . 37

Attribute . . . . . . . . . . . . . . . . . . . 50

Changing audio during play . . . . 27

Channel . . . . . . . . . . . . . . . . . . . 36

Language . . . . . . . . . . . . . . . . . . 40

AVCHD. . . . . . . . . . . . . . . . . . . . 49, 52

iPod/iPhone. . . . . . . . . . . . . . . . . . . 34

IP address . . . . . . . . . . . . . . . . . . . . 42

JPEG . . . . . . . . . . . . . . . . . . . . . . . . 49

Resume play function. . . . . . . . . . . 27

BD-J . . . . . . . . . . . . . . . . . . . . . . . . . 52

BD-Live . . . . . . . . . . . . . . . . . . . . . . 28

BD-Video Ratings . . . . . . . . . . . . . . 39

BONUSVIEW . . . . . . . . . . . . . . . . . . 28

LAN . . . . . . . . . . . . . . . . . . . . . . . . . 19

Language

SD card. . . . . . . . . . . . . . . . . . . . 11, 28

Search . . . . . . . . . . . . . . . . . . . . . . . 27

Setup menu . . . . . . . . . . . . . . . . . . . 39

Skip. . . . . . . . . . . . . . . . . . . . . . . . . . 27

Sleep timer. . . . . . . . . . . . . . . . . . . . . 8

Slideshow . . . . . . . . . . . . . . . . . . . . 30

Slow-motion. . . . . . . . . . . . . . . . . . . 27

Soundtrack . . . . . . . . . . . . . . . . . . . 36

Status Message. . . . . . . . . . . . . . . . 27

Still picture. . . . . . . . . . . . . . . . . . . . 30

Subtitle. . . . . . . . . . . . . . . . . . . . . . . 36

Surround sound . . . . . . . . . . . . . . . 26

Audio . . . . . . . . . . . . . . . . . . . . . 40

Code list . . . . . . . . . . . . . . . . . . . 50

Menu . . . . . . . . . . . . . . . . . . . . . 40

On-Screen . . . . . . . . . . . . . . . . . 41

Soundtrack . . . . . . . . . . . . . . . . . 36

Subtitle . . . . . . . . . . . . . . . . . 36, 40

Local storage . . . . . . . . . . . . . . . . . 52

Chapter . . . . . . . . . . . . . . . . . . . . . . 28

Cleaning

Disc . . . . . . . . . . . . . . . . . . . . . . . 7

Lens . . . . . . . . . . . . . . . . . . . . . . . 7

Main unit. . . . . . . . . . . . . . . . . . . . 7

Connection

Antenna . . . . . . . . . . . . . . . . . . . 18

AUX . . . . . . . . . . . . . . . . . . . . . . 16

Digital transmitter . . . . . . . . . . . . 18

HDMI . . . . . . . . . . . . . . . . . . . . . 17

iPod/iPhone . . . . . . . . . . . . . . . . 34

OPTICAL IN . . . . . . . . . . . . . 16, 17

Set Top Box . . . . . . . . . . . . . . . . 17

Speaker . . . . . . . . . . . . . . . . . . . 15

TV. . . . . . . . . . . . . . . . . . . . . . . . 16

USB . . . . . . . . . . . . . . . . . . . . . . 24

Wireless LAN . . . . . . . . . . . . . . . 19

Wireless system. . . . . . . . . . . . . 14

LPCM . . . . . . . . . . . . . . . . . . . . . . . . 52

Playback. . . . . . . . . . . . . . . . . . . 36

Pop-up . . . . . . . . . . . . . . . . . . . . 27

Setup . . . . . . . . . . . . . . . . . . . . . 39

MPEG2 . . . . . . . . . . . . . . . . . . . . . . . 49

MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 49

Mute the sound . . . . . . . . . . . . . . . . . 8

VIERA CAST . . . . . . . . . . . . . . . . . . 36

VIERA Link “HDAVI Control^TM

” . . . 33

Whisper-mode Surround . . . . . . . . 26

x.v.Colour^TM. . . . . . . . . . . . . . . . . . . 52

On-Screen

Language . . . . . . . . . . . . . . . . . . 41

Status Message . . . . . . . . . . . . . 27

Picture-in-picture . . . . . . . . . . . . . . 28

Playback

Deep Colour . . . . . . . . . . . . . . . . . . 52

Default Settings . . . . . . . . . . . . . . . 42

Dialog Enhancer . . . . . . . . . . . . . . . 37

DIRECT NAVIGATOR . . . . . . . . . . . 27

Disc and card handling . . . . . . . . . . 7

DivX . . . . . . . . . . . . . . . . . . . . . . . . . 49

DLNA . . . . . . . . . . . . . . . . . . . . . . . . 38

Dolby Digital . . . . . . . . . . . . . . . 40, 52

Dolby Digital Plus. . . . . . . . . . . 40, 52

Dolby Pro Logic II. . . . . . . . . . . 26, 52

Dolby TrueHD . . . . . . . . . . . . . . 40, 52

DTS . . . . . . . . . . . . . . . . . . . . . . 40, 52

DTS-HD . . . . . . . . . . . . . . . . . . . 40, 52

24p . . . . . . . . . . . . . . . . . . . . 37, 41, 52

3D . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

AVCHD. . . . . . . . . . . . . . . . . . . . 27

DivX . . . . . . . . . . . . . . . . . . . . . . 29

JPEG . . . . . . . . . . . . . . . . . . . . . 30

MPEG2. . . . . . . . . . . . . . . . . . . . 27

MP3 . . . . . . . . . . . . . . . . . . . . . . 31

Playlists . . . . . . . . . . . . . . . . . . . . . . 25

Pop-up menu. . . . . . . . . . . . . . . . . . 27

Product Disposal . . . . . . . . . . . . . . . 7

Progressive . . . . . . . . . . . . . . . . . . . 37

Properties

Title. . . . . . . . . . . . . . . . . . . . . . . 28

Still picture . . . . . . . . . . . . . . . . . 30

Proxy Server . . . . . . . . . . . . . . . . . . 42

P4HD . . . . . . . . . . . . . . . . . . . . . . . . 52

Finalize . . . . . . . . . . . . . . . . . . . . . . 11

Firmware update. . . . . . . . . . . . . . . 23

Formatting SD cards . . . . . . . . . . . 28

Frame-by-frame . . . . . . . . . . . . . . . 27

Quick Start. . . . . . . . . . . . . . . . . . . . 42

VQT2W23

\For\the\United\Kingdom\and\Republic\of\Ireland\customers\

Sales and Support Information

Customer Care Centre

≥ For customers within the UK: 0844 844 3852

≥ For customers within the Republic of Ireland: 01 289 8333

≥ Visit our website for product information

www.panasonic.co.uk

≥ E-mail: [email protected]

Direct Sales at Panasonic UK

≥ For customers: 0844 844 3856

≥ Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre

Monday–Thursday 9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m. (Excluding public holidays)

≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com

≥ Most major credit and debit cards accepted.

≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.

≥ It couldn’t be simpler!

≥ Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further

details.

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: http://panasonic.net

VQT2W23

Panasonic Corporation 2010

F0710SB0

Phillips Temro Industries Car Video System 220XI User Manual
Philips 40PFL66X6K User Manual
Panasonic VDR M70PP User Manual
Panasonic CQ DFX572U User Manual
Oster BCBG08 User Manual
Orion Car Audio 2100HCCA User Manual
Olympus EVOLT E 500 User Manual
Nikon Camcorder S2J00200401 User Manual
Nady Systems Car Speaker PS215 User Manual
Kambrook Blender KSB8 User Manual