DIGITAL CAMERA
SP-310
SP-350
Detailed explanations of all the
functions for getting the most out
of your camera.
Advanced
Manual
Basic Operation
Basic Shooting
Advanced Shooting
Playing Back
Printing
Online Pictures
Camera Settings
Thank you for purchasing an Olympus digital camera. Before you start to use your
new camera, please read these instructions carefully to enjoy optimum performance
and a longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
In the interest of continually improving products, Olympus reserves the right to update
or modify information contained in this manual.
Composition of the manual
You’ll find important points for
getting the most out of your
camera here.
Read this part before taking
pictures.
Explanations of techniques
from basic to advanced, giving
you an understanding of all the
functions related to taking
pictures.
To view, edit and sort the
pictures you have taken.
Settings to make your camera
easier to use.
To print the pictures you have
taken.
To enjoy the pictures you have
taken on a computer. To use
OLYMPUS Master.
Connecting the camera
Troubleshooting.
For when you want to know
the names of parts, see a list
of menus, or find what you are
looking for.
The title page of each chapter gives a short description of the contents. Be
sure to check it out.
3
Table of Contents
Changing the aperture value and
Changing the area for measuring the brightness of a subject
Adjusting a picture for recording
5
Table of Contents
Selecting the position to begin movie playback
BLACK & WHITE/SEPIA)...................................................... 92
Creating composite pictures
Editing movies................................................................................... 99
Formatting the internal memory or card
(PW ON SETUP/PW OFF SETUP)..................................... 110
6
Table of Contents
Setting camera sounds
Setting the date and time in another time zone
Customizing the camera (MY MODE SETUP/SHORT CUT/
Printing pictures .............................................................................. 152
using OLYMPUS Master..................................................... 154
7
1 Basic operation
Basic operation
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
1
Are you ever overwhelmed by all of the
advanced shooting and editing functions?
Professional photographers use these
functions to achieve a variety of effects. Now
you too can achieve such effects simply by
pressing the buttons on your digital camera.
You can use the various functions available to
adjust the brightness and white balance of
your pictures, alter the focusing range, and
much more.
Just display a menu on the monitor and use
the buttons to choose a setting. Familiarize
yourself with the buttons and menus before
reading the explanations of the various
functions.
ESP
OFF
ESP
/
MODE MENU
DRIVE
ISO
AUTO
1/2/3/4
RESET
HOLD
00:36
HQ
Movies
Sequential shooting
9
Mode dial
This camera features a shooting mode and a playback mode. Use the
mode dial to make settings. Set the desired mode and turn the camera on.
1
Shooting modes
Set the mode dial to
one of these
positions to take
pictures or movies.
Playback mode
Set the mode dial to this
position to view pictures or
movies.
(About the mode dial
h
This function allows you to take pictures with full automatic settings.
The camera automatically sets the optimum aperture value and
shutter speed for the brightness of the subject.
P
This function allows you to set the aperture manually. The
A
S
This function allows you to set the shutter speed manually. The
Shooting
modes
This function allows you to set the aperture and shutter speed
M
This function allows you to set your own shooting parameters
r
This function allows you to select from 24 situation-related
f modes set to the shooting conditions.
n
This function lets you record movies.
This function allows you to play back still pictures or movies.
Playback
mode
q
TIPS
•
Direct button functions and menu contents vary depending on the position of the
• You can change the mode before and after turning the camera on.
g
10
Direct buttons
This camera features buttons for setting functions directly.
The direct buttons have different functions in shooting mode and in playback mode.
1
Using the direct buttons in shooting mode
12
3
4
5
#button (Flash mode)
Selects the flash mode.
1
2
[ button (AE lock)/Custom button
Locks the exposure. The lock function is
alternately activated and canceled each time
you press the button. Frequently used functions
can be assigned to the custom button. The
assigned function setting changes each time
you press the button.
1/200 F4.0 0.0
The screen on the right shows when [DRIVE] is
assigned to the custom button.
SQ1 1600 1200
4
×
DISP./GUIDE button
3
Select a menu item, and press this button to display an explanation of its
function.
Press this button repeatedly to display the lines and histogram. Also
press the DISP./GUIDE button to turn off the monitor.
QUICK VIEW button
4
5
The last picture taken is displayed on the monitor. All the functions in
playback mode are available. To return to shooting mode, press the
QUICK VIEW button or press the shutter button halfway.
Zbutton (OK/MENU)
Displays the top menu of shooting mode.
12
Direct buttons
Using the direct buttons in playback mode
1
12
3
4
Sbutton (Erase)
Erases pictures displayed on the monitor.
1
2
3
<button (Print)
Prints pictures displayed on the monitor.
DISP./GUIDE button
Select a menu item, and press this button to display an explanation of its function.
Press this button repeatedly during playback to change the display in the
following order. The histogram is not displayed while displaying movies.
The playback screen is
displayed.
Detailed camera information is
displayed.
100 0004
SQ1
100 0004
:
SQ1
SIZE 1600 1200
×
0 1/100
F4
.
2.0
+
ISO400
:
:
’05. 09. 26 12 30
4
’05
.
09
.
26 12 30
4
SQ1
F4.0
1/100
2
.0
+
ISO400
:
26 12 30
’05
.
09
.
4
Only f is displayed.
The histogram is displayed.
Zbutton (OK/MENU)
4
Displays the top menu of playback mode.
13
Menus
Set the mode dial to any mode and press Zto display the menus on the
monitor. Menus are used to make each camera setting.
1
Mode dial
Press Z
About the menus
The menu items displayed in shooting mode and playback mode differ.
Top menu
Menus are divided into shortcut
menus and mode menus.
MODE MENU
O
RESET
HOLD
Shortcut menus
Mode menu
For setting menu items directly.
Settings are categorized by function
into tabs.
TIPS
• Press and hold down Zon the top menu to jump directly to one of the following
functions.
Shooting mode (except r)
Playback mode
Album playback mode
14
Menus
Shortcut menus
1
(Shooting mode
For still pictures
(default value)
For movies
DIGITAL ZOOM
MODE MENU
MODE MENU
O
HOLD
RESET
HOLD
RESET
(Playback mode
For still pictures
For movies
EDIT
MOVIE PLAY
ALBUM
MODE MENU
CALENDAR
ALBUM
MODE MENU
CALENDAR
O
HOLD
ALBUM ENTRY
HOLD
ALBUM ENTRY
In album playback mode
For still pictures
For movies
MOVIE PLAY
CLOSE ALBUM ALBUM MENU
SEL. ALBUM
CLOSE ALBUM
ALBUM MENU
SEL. ALBUM
HOLD
UNDO ENTRY
HOLD
UNDO ENTRY
TIPS
• The shortcut menus can also be accessed from the mode menu. Also, you can
change short cut menus in any mode other than h, n, and q.
15
Menus
Mode menu
1
(Shooting mode
ESP
OFF
ESP
/
DRIVE
ISO
AUTO
1/2/3/4
CAMERA
tab
For setting shooting-related functions.
PICTURE For setting picture-related functions, such as record mode and white
tab balance.
MEMORY/ For formatting internal memory or a card. Also saves internal memory
CARD tab data to a card.
SETUP tab For setting basic camera functions and settings that make the camera
easier to use.
(Playback mode
OFF
°
0
PLAY tab
EDIT tab
For setting playback-related functions.
For editing saved pictures. The same screen is displayed when
[EDIT] is selected from the top menu.
MEMORY/ For formatting internal memory or a card, and erasing all image data.
CARD tab Also saves internal memory data to a card.
SETUP tab For setting basic camera functions and settings that make the camera
easier to use.
TIPS
• The [MEMORY] tab is displayed when the internal memory is in use. The
[CARD] tab is displayed when a card is inserted in the camera.
16
Menus
Using the menus
1
Use the arrow pad and Zto set menu items.
Follow the operation guide and arrows on the screen to select and change settings.
Ex: Setting [ISO]
Mode dial
srpq buttons
Zbutton
1
2
3
Set the mode dial to any of the following modes:
PASMrfn.
Top menu
Press Z.
•
The top menu is displayed.
Press q to select [MODE MENU].
MODE MENU
This refers to the arrow
pad (srpq).
RESET
HOLD
4
Press sr to select the
[CAMERA] tab, and press q.
ESP
OFF
ESP
/
•
Refer to the arrows on the screen to
select and make settings with the arrow
pad.
DRIVE
ISO
AUTO
1/2/3/4
This refers to the arrow
pad (qr).
17
Menus
5
Press sr to select the [ISO],
and press q.
1
ESP
OFF
ESP
/
•
Refer to the arrows on the screen to
select and make settings with the arrow
pad.
DRIVE
ISO
•
Unavailable settings cannot be
AUTO
selected.
1/2/3/4
The selected item is displayed
in a different color.
Press q to go on to
the following setting.
6
Press sr to select [AUTO],
[64], [100], [200], or [400], and
press Z.
ESP
/
AUTO
64
•
Press Zrepeatedly to exit the menu.
100
200
400
DRIVE
ISO
1/2/3/4
TIPS
• The operation guide displayed at the
bottom of the screen depends on the menu
to be set. In this case, follow the operation
guide to set or change settings using the
arrow pad.
BEEP
OFF
1
LOW
HIGH
2
OK
SELECT
GO
Operation guide
Press psr to select a setting.
Press Zto finalize the setting.
Menu operation notation
In this manual, procedures for using the menus are expressed as follows:
Ex: Steps 1 to 5 for setting [ISO]
•
Top menu [MODE MENU] [CAMERA] [ISO]
18
Menus
Using the GUIDE function
1
This camera has a GUIDE function. Pressing the DISP./GUIDE button during menu
display in shooting mode or playback mode automatically displays a menu guide
explaining the menus.
1
With a menu selected, hold down
the DISP./GUIDE button.
FILE NAME
Sets the format for
naming folders and files
that are to be saved to
a new card.
•
•
The menu explanation is displayed.
Release the DISP./GUIDE button to
close the menu guide.
When [FILE NAME] is selected
19
How to read the procedure pages
A sample of a procedure page is shown below explaining the notation.
Look at it carefully before taking or viewing pictures.
1
This indicates the position of the mode dial.
If multiple icons are displayed, the described function can be used in
any of these modes.
Select the menus in the order
indicated by
Procedures differ for hmode,
nmode, and album playback
mode.
This sample page is only for your reference. It may differ from the actual page in this
manual.
20
2 Tips before you start taking pictures
Tips before you
start taking pictures
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
2
Your pictures are almost guaranteed to come
out well just by setting the mode dial to h
and pressing the shutter button. But
occasionally, you can’t focus on your subject,
the subject is too dark, or the picture doesn’t
come out the way you want.
Just knowing which button to press or which
setting to change can help you solve these
problems.
And did you know that by selecting an image
size according to how you plan to use the
pictures afterwards, you can store more
pictures in the internal memory and on the
memory card? These are just some of the
hints provided in this chapter.
Online applications
Ideas
Ideas
SQ2
SHQ
Printing
applications
21
Turning the camera on and off
Press the POWER button to turn the camera on.
POWER button
Mode dial
2
Monitor
(Turning the camera on
Set the mode dial to any mode, and press the POWER button.
•
•
The monitor turns on.
When you turn on the camera in shooting mode, the lens extends.
(Turning the camera off
Press the POWER button.
•
•
The monitor turns off.
The lens retracts.
TIPS
• The screen on the right is displayed when the
date and time setting has returned to the factory
default setting. Setting the date and time makes
your pictures easier to manage, such as when
you view them with calendar display.
Y/M/D
22
When to use the monitor and viewfinder
You can take pictures using either the monitor or the viewfinder. Use the
one that is most apt for the situation.
To turn the monitor on or off, press the DISP./GUIDE button several times.
Monitor
Viewfinder
2
You can check the picture area Camera movement does not
that the camera actually
Advantages records.
occur easily and subjects can be
seen clearly even in bright
places. Little battery power is
used.
Cameramovementoccurseasily When close to a subject, the
and subjects may be difficult to image in the viewfinder differs
Disadvantages see in bright/dark places. The
slightly from the picture that the
monitor uses more battery power camera actually records.
than the viewfinder.
Use the monitor when you need Use the viewfinder for general
to know the exact area the
camera records, or to take a
close-up of a person or flower
(macro shooting).
snapshots, landscape pictures
and other casual shots.
Tips
Viewfinder
•
•
The camera records a wider area than the image in the
viewfinder.
As you get closer to the subject, the actual image recorded
(the shaded area in the illustration on the left) differs
slightly from the image in the viewfinder.
TIPS
When the monitor darkens
j If the camera is not used for 10 seconds or more, the monitor darkens
slightly. After that, if the camera is not used for 3 minutes or more, the
monitor turns off automatically. Press the shutter button or use the zoom
lever to turn the monitor on.
To adjust the brightness of the monitor
When the monitor is hard to see
j Bright light, such as direct sunlight, may cause vertical lines (smears) to
appear on the image in the monitor. This does not affect recorded pictures.
Note
• When a conversion lens is attached to the camera, vignetting may occur in the
viewfinder so use the monitor.
23
If the correct focus cannot be obtained
The camera automatically detects the focus target in the frame. The level
of contrast is one of the criteria it uses to detect the subject. The camera
may fail to determine subjects with lower contrast than the surroundings or
with an area of extremely strong contrast in the frame. If this happens, the
simplest solution is to use the focus lock.
2
How to focus (focus lock)
1
Position the AF target mark on
the subject you want to focus on.
1/200 F4.0 0.0
•
When shooting a hard-to-focus or fast-
moving subject, focus the camera on an
object about the same distance away as
the subject.
SQ1 1600 1200
×
4
AF target mark
2
3
Press the shutter button halfway
until the green lamp lights.
•
The green lamp lights when the focus
and exposure are locked.
Shutter button
•
When the green lamp blinks, the focus
and exposure are not locked. Release your finger from the shutter button,
re-position the AF target mark on the subject and press the shutter button
halfway again.
Green lamp
Keeping the shutter button
pressed halfway, recompose
your shot.
1/200 F4.0 0.0
SQ1 1600 1200
×
4
4
Press the shutter button fully.
•
The camera takes the picture. The
orange lamp blinks while the picture is
recorded.
Shutter button
24
If the correct focus cannot be obtained
TIPS
To focus on the subject in the center of the frame
When the frame in which you focus on a subject is different from the
frame in which you lock the exposure
2
To fix the focus
Note
• Press the shutter button gently. If it is pressed forcefully, the camera may move
causing the picture to blur.
• Never remove the batteries or disconnect the AC adapter while the orange
lamp on the side of the viewfinder is blinking. Doing so could destroy stored
pictures and prevent storage of pictures you have just taken.
• Recorded pictures are saved in the camera regardless of whether the camera
is turned off or the batteries are replaced or removed.
• When taking pictures against strong backlight, the area of the picture in shadow
may appear colored.
• When a conversion lens is attached to the camera, the edges of the picture may
appear dark. Check the recorded image on the monitor.
Subjects that are difficult to focus on
Under certain types of conditions, the auto focus may not work properly.
The green lamp
blinks.
The subject cannot
be brought into focus.
Subject with
low contrast
Subject with an
extremely bright
area in the center
of the frame
Subject without
vertical lines
The green lamp
lights, but the
subject cannot be
brought into focus.
Subjects at
different
distances
Fast-moving
subject
The subject is
not in the center
of the frame
In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the picture.
If the subject has no vertical lines, hold the camera vertically and focus the camera
using the focus lock function by pressing the shutter button halfway, then return the
camera to the horizontal position while keeping the button pressed halfway and take
the picture.
25
Record mode
You can select a record mode in which to take pictures or shoot movies.
Select the best record mode for your purpose (printing, editing on a
computer, website editing, etc.). For information on the image sizes for
each record mode and the number of storable still pictures/movie
2
Still picture record modes
Still pictures (other than those in raw data format) are recorded in JPEG format.
Record mode depicts the image size and compression rate of your pictures.
Pictures are made from thousands of dots (pixels). If a picture with relatively few
pixels is enlarged, it looks like a mosaic. Pictures with more pixels are denser and
clearer but require more space (larger file size), thus decreasing the number of
pictures that can be saved. Though a high compression rate results in a small file
size, this also produces a grainy look.
Picture with high number of pixels
Picture with low number of pixels
(Normal image modes
Image becomes clearer
Compression
Low com- High com-
Application
pression pression
Image size
3072 × 2304 (SP-310)
SHQ
HQ
3264 × 2448 (SP-350)
2592 × 1944
2288 × 1712
2048 × 1536
1600 × 1200
1280 × 960
SQ1
HIGH
SQ1
NORMAL
Selectaccording
to print size
1024 × 768
SQ2
SQ2
For small-sized
prints and
HIGH
NORMAL
640 × 480
websites
26
Record mode
Image size
The number of pixels (horizontal × vertical) used when saving an image. You can
save your pictures at a large image size to get clearer prints. However, as the image
size increases, the file size (data size) also increases, which decreases the number
of pictures that can be saved.
2
Compression
In record modes other than [RAW], pictures are compressed and saved. The higher
the compression, the less clear the image will be.
(Special record modes
Image size
Record mode
RAW
Features
SP-310
SP-350
Raw uncompressed data. Data is
in ORF format.
3072 × 2304 3264 × 2448
3072 × 2048 3264 × 2176
3:2
(SHQ, HQ)
This is useful for ordering prints
from a photo store.
Raw data
This is unprocessed data which has not been subjected to color conversion or white
balance, sharpness and contrast adjustment. Use the OLYMPUS Master software
to display the picture data on a computer. You can also view the data with Photoshop
software by installing the Plug-in available from the Olympus website. Raw data
cannot be displayed using ordinary software, and print reservations cannot be made.
Pictures taken with the record mode set to raw data can be edited with this camera.
3:2
The image aspect ratio is normally 4:3. If the
1/200 F4.0 0.0
aspect ratio is changed to 3:2, the image can be
printed at a photo store without losing the image
borders.
HQ 3264 2176
×
4
Monitor display when
3:2 is set
27
Record mode
Movie record modes
Movies are recorded in Motion-JPEG format.
Number of storable still pictures/remaining
recording time
2
For still pictures (SP-310)
Number of storable still pictures
Using a 128 MB
card
Record
mode
Internal memory
Image size
With
Without
sound
With
Without
sound
sound
sound
RAW
SHQ
3072 × 2304
3072 × 2304
3072 × 2048
3072 × 2304
3072 × 2048
2
5
2
5
12
24
12
24
5
5
27
27
3:2
3:2
14
16
7
15
17
7
71
73
HQ
80
82
HIGH
34
34
2592 × 1944
NORMAL
HIGH
20
9
21
9
99
102
44
44
2288 × 1712
2048 × 1536
1600 × 1200
1280 × 960
1024 × 768
640 × 480
NORMAL
HIGH
26
11
32
18
50
28
75
42
110
97
207
27
11
33
18
53
29
82
44
127
110
276
126
54
130
55
SQ1
NORMAL
HIGH
156
88
162
90
NORMAL
HIGH
241
135
362
204
532
469
997
257
140
399
215
614
532
1330
NORMAL
HIGH
SQ2
NORMAL
HIGH
NORMAL
28
Record mode
For still pictures (SP-350)
Number of storable still pictures
Using a 128 MB
card
Record
Image size
mode
Internal memory
With
Without
sound
With
Without
sound
2
sound
sound
RAW
SHQ
3264 × 2448
3264 × 2448
3264 × 2176
3264 × 2448
3264 × 2176
2
4
2
4
10
22
10
22
5
5
24
24
3:2
3:2
13
14
7
13
15
7
63
64
HQ
71
72
HIGH
NORMAL
HIGH
36
37
2592 × 1944
20
9
21
9
99
102
44
44
2288 × 1712
2048 × 1536
1600 × 1200
1280 × 960
1024 × 768
640 × 480
NORMAL
HIGH
26
11
32
18
50
28
75
42
110
97
207
27
11
33
18
53
29
82
44
127
110
276
126
54
130
55
SQ1
NORMAL
HIGH
156
88
162
90
NORMAL
HIGH
241
135
362
204
532
469
997
257
140
399
215
614
532
1330
NORMAL
HIGH
SQ2
NORMAL
HIGH
NORMAL
29
Record mode
For movies
Remaining recording time
Internal memory Using a 128 MB card
Record mode
Image size
With
Without
sound
With
Without
sound
sound
sound
2
640 × 480
(30 frames/sec.)
1 min.
10 sec.
1 min.
10 sec.
SHQ
HQ
14 sec.
29 sec.
14 sec.
29 sec.
40 sec.
640 × 480
(15 frames/sec.)
2 min.
20 sec.
2 min.
21 sec.
320 × 240
(30 frames/sec.)
3 min.
10 sec.
3 min.
13 sec.
SQ1
SQ2
39 sec.
1 min.
320 × 240
(15 frames/sec.) 18 sec.
1 min.
20 sec.
6 min.
15 sec.
6 min.
26 sec.
1/200 F4.0 0.0
0.0
00:36
SQ1 1600 1200
4
HQ
×
Number of storable still pictures
Remaining recording time
TIPS
• When a picture is transferred to a computer, the size of the picture on the
computer screen varies depending on the computer’s monitor setting. For
instance, a picture taken with an image size of 1,024 × 768 fills the screen if you
set the picture to 1× when the monitor setting is 1,024 × 768. However, if the
monitor setting is over 1,024 × 768 (such as 1,280 × 1,024), the picture only
takes up part of the screen.
Note
• The number of storable still pictures and remaining recording time listed in the
tables are approximate.
• The number of storable still pictures may change according to the subject or
factors like whether print reservations or album entries have been made or not.
In certain instances, the number of remaining pictures does not change even
when you take new pictures or erase stored pictures.
30
Record mode
Changing the record mode
2
Top menu [MODE MENU] [PICTURE] [K]
•
For hn: Top menu [K]
1
For still pictures, select from
[RAW], [SHQ], [HQ], [SQ1] or
[SQ2].
RAW
SHQ
HQ
•
[RAW] cannot be set in hor f
mode.
SQ1
•
OK
GO
SELECT
SET
For still pictures
For movies, select from [SHQ
640 × 480 30fps], [HQ 640 × 480
15fps], [SQ1 320 × 240 30fps] or
[SQ2 320 × 240 15fps].
SHQ 640×480 30fps
HQ 640×480 15fps
SQ1 320×240 30fps
SQ2 320×240 15fps
OK
GO
SELECT
For movies
2
3
Select the image size of the
record mode.
SQ2
1280×960
HIGH
If you selected [SQ1] or [SQ2],
press q after choosing the image
size, then select [HIGH] or
[NORMAL].
1024×768
640×480
NORMAL
OK
SELECT
GO
When [SQ2] is selected
Press Z.
31
Record mode
(JPEG copy
Pictures taken in the raw data format can be stored in JPEG format at the same time
as they are recorded in raw data. To record pictures in JPEG format you can select
[SHQ], [HQ], [SQ1] or [SQ2] for the record mode, but you cannot select the image
size. Pictures are recorded in the size currently set for each record mode.
2
1
2
In the [K] screen, select [RAW], and press q.
Select a JPEG duplicate setting
JPEG DUPLICATE SETTING
from [OFF], [SHQ], [HQ], [SQ1]
and [SQ2].
OFF
SHQ
HQ
•
Select [OFF] to save raw data only.
3
Press Z.
SQ1
OK
GO
SELECT
32
The internal memory and memory card
Pictures taken are recorded in the internal memory.
Pictures can also be recorded to an optional xD-Picture Card (“card”). The
card can be used to record more pictures than is possible with the internal
memory of the camera. A card can be convenient when taking many
pictures while on a trip.
2
(Internal memory basics
The internal memory is the camera’s media for recording pictures, similar to film in
a film camera.
Pictures recorded to the internal memory can be easily erased on the camera or
processed using a computer. Unlike portable storage media, the internal memory
cannot be removed or exchanged.
(Using the internal memory or card
You can confirm on the monitor whether the internal memory or card is being used
during shooting and playback operations.
Shooting mode
Playback mode
1/200 F4.0 0.0
100 0004
SQ1
:
’05. 09. 26 12 30
4
SQ1 1600 1200
4
×
Memory indicator
Monitor
indication
Shooting mode
Playback mode
Pictures are recorded to the
internal memory.
Pictures are being played back
from the internal memory.
[IN]
Pictures are recorded to a card. Pictures are being played back
from a card.
[xD]
•
•
The internal memory and a card cannot be used at the same time.
The internal memory cannot be used for shooting or playback operations when a
card is inserted in the camera. Remove the card before using the internal memory.
•
33
The internal memory and memory card
The card
The card is a medium for recording pictures, similar to film in a film camera.
Pictures recorded to the card can be easily erased on the camera or processed
using a computer. The number of recordable pictures can be increased by using a
card with a larger capacity.
2
1
Index area
You can use this space to write the contents of the
card.
1
2
2
Contact area
The part where the data transferred from the camera
enters the card.
Compatible cards
xD-Picture Card (16 MB to 1 GB)
Note
• This camera may not recognize a non-OLYMPUS card or a card that was
formatted on another device (such as a computer, etc.). Make sure to format
Inserting and removing the card
1
Make sure the camera is turned off.
•
•
The monitor is off.
The lens is retracted.
2
Open the card cover.
Card cover
34
The internal memory and memory card
(Inserting the card
Orient the card as shown, and
3
insert it into the card slot as
shown in the illustration.
2
•
•
•
Insert the card straight in.
Insert the card until it clicks into place.
Inserting the card in the wrong direction
or at an angle may damage the contacts
and prevent the card from being
removed.
•
The card may not record properly if it is
not inserted all the way in.
Notch
(Removing the card
3
Push the card all the way in and
release slowly.
•
The card protrudes slightly and stops.
Caution
Releasing your finger quickly after
pushing the card all the way in may
cause it to eject forcefully out of the slot.
•
Grasp the card and remove.
4
Close the card cover.
Card cover
35
nctions
Basic shooting
functions
ꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ
3
A professional photographer adjusts the
exposure to the optimal setting, chooses the
best focusing method and even selects the
type of film according to the subject.
With a digital camera, you don’t need to learn
how to make difficult settings. Your camera will
adjust the settings for you! All you have to do
is choose a scene mode for whatever you
want to take, whether a landscape, a night
scene, or a portrait-style image, and the
camera will set the best exposure and white
balance.
There’s nothing to it – just press the shutter
button!
1
PORTRAIT
16
DOCUMENTS
OK
GO
SELECT
2
LANDSCAPE
OK
SELECT
GO
15
OK
GO
SELECT
CUISINE
3
LANDSCAPE+PORTRAIT
OK
GO
SELECT
OK
GO
SELECT
36
Selecting a scene mode according to the
situation
This function allows you to select from 24 fmodes set to the shooting
conditions. When you select a scene according to the situation or
conditions, the camera automatically selects the optimal settings.
(fmode
B Portrait
3
Suitable for taking portrait pictures. This mode accentuates the skin texture of the
portrait subject.
F Landscape
Suitable for taking pictures of landscapes and other outdoor scenes. Blues and
greens are vividly reproduced.
D Landscape + Portrait
Suitable for taking pictures of your subject against a distant background. Blues,
greens, and skin tones are vividly reproduced.
G Night Scene
Suitable for taking pictures in the evening or at night. The camera sets a slower
shutter speed than is used in normal shooting.
C Sports
Suitable for capturing fast-moving action. Even fast-moving subjects appear to be
stationary.
U Night + Portrait
Suitable for taking pictures of your subject against a distant night scene. The camera
sets a slower shutter speed than is used in normal shooting.
N Indoor
Suitable for taking pictures of people indoors. The atmosphere of the background is
also vividly reproduced.
37
Selecting a scene mode according to the situation
W Candle
Suitable for capturing the atmosphere of a candle-lit scene. Warm colors are
reproduced.
R Self Portrait
Suitable for taking self-portrait pictures.
c Available Light Portrait
Suitable for shooting subjects in low light conditions without a flash.
S Sunset
3
Suitable for taking pictures of the evening sunlight. Reds and yellows are vividly
reproduced.
X Fireworks
Suitable for taking pictures of fireworks displays. The camera sets a slower shutter
speed than is used in normal shooting.
j Museum
Suitable for taking pictures in museums and other places where flash photography
and sounds are prohibited.
P Behind Glass
Suitable for shooting a subject through glass.
V Cuisine
Suitable for taking pictures of food. Food colors are vibrantly reproduced.
d Documents
Suitable for taking pictures of documents or time schedules. The contrast between
the text and background is enhanced.
38
Selecting a scene mode according to the situation
i Auction
Suitable for taking pictures of merchandise. The camera takes 3 pictures in
succession at the best size while automatically adjusting the exposure.
e Shoot & Select1 / f Shoot & Select2
Pictures are taken in succession. You can erase unwanted pictures before saving
the ones you want. Suitable for taking moving subjects.
Shoot & Select1 (e)
Shoot & Select2 (f)
Focus is locked at the first frame.
Takes pictures in succession, adjusting the focus 1 frame
at a time.
3
Z Beach
Suitable for taking pictures on a sunny day at the beach. You can take pictures of
your subject against a beautiful sky or landscape.
a Snow
Suitable for taking pictures in the snow. You can take pictures of your subject against
a beautiful sky or snow scene.
k Under Water Wide1 / l Under Water Wide2
Suitable for taking pictures of scenery under water. Be sure to use the underwater
housing.
Under Water Wide1 (k)
Under Water Wide2 (l)
Takes pictures, adjusting the focus 1 frame at a time.
The focus is fixed at a distance of approximately 5 m
(16.4 ft.). This distance may change depending on the
water quality.
H Under Water Macro
Suitable for taking pictures under water in macro mode. Be sure to use the
underwater housing.
Note
• If you select a scene that does not use the flash or a scene with a slower shutter
speed, camera movement may occur. It is recommended that you use a tripod
to prevent camera movement.
• In order to produce specialized effects, some scenes limit control of certain
functions. For details, refer to “Functions available in shooting modes and
39
Selecting a scene mode according to the situation
1
Press sr to select a scene,
and press Z.
1
PORTRAIT
3
OK
GO
SELECT
2
Take the picture.
•
•
For shoot & select, hold down the shutter button.
To change the scene, press r. Or, press Zto display the top menu and
select [SCENE].
(
When [SHOOT & SELECT1] or [SHOOT & SELECT2] is selected
•
After taking your pictures, the screen for
selecting which pictures to erase is
displayed.
The highlighted picture is
enlarged.
1 Press pq to select the picture you
want to erase, and press s.
Repeat Step 1 to erase multiple
pictures.
OK
GO
SELECT
The R icon is displayed on
the selected picture.
2 When you have selected all the unwanted pictures, press Z.
3 Select [YES], and press Z.
•
The selected pictures are erased, and only the remaining pictures are
saved.
40
Zooming in on your subject
Using the zoom
You can zoom in on your subject using the optical zoom and digital zoom. With the
optical zoom, the image is enlarged on the CCD when the lens magnification is
changed, and the image is formed by all the CCD pixels. With the digital zoom, the
area at the center of the image captured by the CCD is cropped and enlarged.
Because digital zoom takes a small area of the picture and enlarges it, the picture
becomes grainy as the digital zoom magnification increases.
The following zoom magnifications are available on this camera.
3
Optical zoom
3× (equivalent to 38 mm to 114 mm on a 35 mm
camera)
Optical zoom × digital zoom Max. 15× ([n] mode: Max. 9×)
Note that camera movement is likely to occur at higher magnifications.
1
Push or pull the zoom lever.
•
•
Zoom out: Push the zoom lever toward W.
Zoom in: Pull the zoom lever toward T.
Zoom lever
Using the digital zoom
Top menu [MODE MENU] [CAMERA] [DIGITAL ZOOM] [ON]
•
For n: Top menu [DIGITAL ZOOM] [ON]
1
Pull the zoom lever toward T.
Optical zoom
1/200 F4.0 0.0
Digital zoom
1/200 F4.0 0.0
SQ1 1600 1200
4
SQ1 1600 1200
4
×
×
The white area of the zoom indicator indicates the optical zoom. If the [DIGITAL
ZOOM] is set to [ON], a red area is displayed on the zoom indicator. When you reach
the limit of the optical zoom, the digital zoom is enabled.
41
Zooming in on your subject
Note
• Taking a picture with the digital zoom may cause the picture to appear grainy.
Using macro/super macro mode
Focusing is usually slow when you get close to a subject (wide-angle: 20 cm/7.9 in.
to 50 cm/19.7 in.; telephoto: 30 cm/11.8 in. to 50 cm/19.7 in.). However, in macro
mode focusing is performed quickly.
3
&
This mode lets you shoot from as close as 20 cm/7.9 in. to your subject (when
the optical zoom is at the greatest wide-angle).
%
This mode lets you shoot from as close as 2 cm/0.8 in. to your subject. In the
[%] mode, normal shooting is also possible, but the position of the zoom is
fixed automatically and cannot be adjusted.
&
%
Top menu [MODE MENU] [CAMERA] [&] [&] / [%]
•
For h: Top menu [&] [&] / [%]
Note
• During super macro mode, the zoom is not available.
• If you are close to a subject, the picture in the viewfinder is different from the
area that the camera actually records. For macro mode shooting, use the
monitor.
• During super macro shooting, the built-in flash is not available.
• You can use an external flash during super macro mode shooting, but
vignetting may occur. Check the recorded image on the monitor (SP-350).
42
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve.
Flash working range
W (max.): Approx. 0.4 m to 3.8 m (1.3 ft. to 12.5 ft.)
T (max.): Approx. 0.4 m to 2.2 m (1.3 ft. to 7.2 ft.)
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
Red-eye reduction flash (!)
3
The light from the flash may make the
subject’s eyes appear red in the picture.
The red-eye reduction flash mode
reduces this phenomenon by emitting
pre-flashes before firing the regular
flash.
The subject’s eyes appear red.
Note
• After the pre-flashes, it takes about 1 second before the shutter is released.
Hold the camera firmly to avoid camera movement.
• Effectiveness may be limited if the subject is not looking directly at the pre-
flashes, or if the shooting range is too far. Individual physical characteristics
may also limit effectiveness.
Red-eye fill-in flash (H)
The flash always fires after pre-flashes for red-eye reduction are emitted.
Fill-in flash (#)
The flash fires regardless of the available
light. This mode is useful for eliminating
shadows on the subject’s face (such as
shadows from tree leaves), in a backlight
situation, or for correcting the color shift
produced by artificial lighting (especially
fluorescent light).
Note
• The fill-in flash may not have the desired effect under excessively bright light.
Flash off ($)
The flash does not fire even in low light conditions. Use this mode in situations where
flash photography is not desired or is prohibited. You can also use this mode when
shooting landscapes, sunsets, and other subjects outside the range of the flash.
43
Flash shooting
Note
• Since a slow shutter speed is automatically selected in low light situations when
in the flash off mode, the use of a tripod is recommended to prevent your
pictures from being blurred by camera movement.
3
1
Press the #button repeatedly to
1/200 F4.0 0.0
set the flash mode.
AUTO
•
•
After 2 seconds of non-operation, the
selection is set and the mode selection
screen disappears.
Each time you press #(flash mode),
the flash mode changes in the following
order.
SQ1 1600 1200
4
×
AUTO
(Auto-flash)
!(Red-eye
reduction flash)
#(Fill-in flash)
$(Flash off)
H(Red-eye
fill-in flash)
•
In S mode and M mode, the flash mode changes in the following order.
#(Fill-in flash) H(Red-eye fill-in flash)
$(Flash off)
2
3
Press the shutter button halfway.
#mark
•
In conditions where the flash will fire, the
1/200 F4.0 0.0
#mark lights (flash stand-by).
Press the shutter button fully to
take the picture.
SQ1 1600 1200
4
×
44
Flash shooting
TIPS
The orange lamp blinks or [BUSY] is displayed.
j The flash is charging. Wait until the orange lamp beside the viewfinder turns
off.
Note
• The flash does not fire in the following situations:
High-speed sequential shooting, auto bracketing, super macro shooting,
and panorama shooting.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
• When a conversion lens is attached to the camera, vignetting may occur with
the built-in flash. To take flash pictures, use an external flash (SP-350).
3
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when increased
contrast is desired.
Top menu [MODE MENU] [CAMERA] [w]
1
Press sr to adjust the flash
intensity, and press Z.
0.0
SYNCRO
FLASH
DIGITAL ZOOM
45
Flash shooting
Synchro
Select the flash timing.
#SYNC1 (front curtain)
#SYNC2 (rear curtain)
The flash fires right after the shutter fully opens.
With the rear curtain, the flash fires just before the
shutter closes. You can use this setting to create
interesting effects in your picture, such as
expressing the movement of a car by showing the
tail-lights streaming backwards. The slower the
shutter speed, the better the effects turn out. If the
shutter speed is faster than 1/200, the flash fires
automatically with the front curtain.
3
When the shutter speed is set to 4 sec.
4 sec.
rear curtain
front curtain
4
0
sec.
rear curtain flash
fires
Shutter closes
frontcurtainflash
fires
Shutter button fully
pressed
Top menu [MODE MENU] [CAMERA] [#SYNCRO]
[#SYNC1] / [#SYNC2]
46
SSeleectliengcthteinflagsht(FhLeASfHl)ash (QFLASH)
Using the external flash (optional) (SP-350)
Various types of flash shooting are possible with the Olympus FL series external
flashes. The external flash can be used either by itself or together with the built-in
flash.
The external flash detects the flash mode and exposure compensation automatically
and functions just like the built-in flash. The external flash can be mounted on the
camera by attaching it to the hot shoe on the top of the camera, or by using the
exclusive FL-BK01 flash bracket (optional) and FL-CB02 bracket cable (optional).
3
This chapter explains how to use the FL-20 when attached to the hot shoe.
IN+Q
The built-in flash only is used or the external flash is used together with
the built-in flash.
Q
The external flash only is used.
Top menu [MODE MENU] [CAMERA] [QFLASH]
1
Slide the shoe cover off in the direction of the arrow and
attach the external flash.
•
For instructions on how to attach the flash, refer to the manual for the
external flash.
•
Keep the shoe cover in a safe place to prevent it getting lost, and replace it
on the camera when you have finished using the external flash.
Hot shoe
Shoe cover
47
Selecting the flash (QFLASH)
2
3
Turn on the external flash.
•
•
Set the mode dial to TTL-AUTO.
Be sure to attach the flash to the camera before turning the flash on.
Press the #button repeatedly to set the flash mode.
Note
3
• If close-up pictures are overexposed, try using the built-in flash by itself.
• When the built-in flash and the external flash are used together, the built-in
flash is used as the compensating light source. If the amount of light from the
external flash is insufficient (beyond its working range), the resulting pictures
may be underexposed.
Using commercially available external flashes (SP-350)
Provided that the flash can be connected to the hot shoe, a commercially available
external flash may be used. For details on compatible commercially available
commercially available external flashes except Olympus FL series.
1
2
Attach the external flash to the
hot shoe and connect it to the
camera.
•
For instructions on how to attach the
flash, refer to the manual for the external
flash.
Adjust the shutter speed and
aperture.
•
Remember that a slow shutter speed
can produce blurred images. For the
best results, we recommend that you set
the shutter speed from 1/200 to 1/300
seconds.
48
Selecting the flash (QFLASH)
3
4
Turn on the external flash.
•
Be sure to attach the flash to the camera before turning the flash on.
Set the mode that automatically controls the amount of light
emitted by the external flash. Also set the ISO sensitivity and
aperture on the external flash to match the camera’s
settings.
•
Refer to the manual for the external flash to select its mode.
3
Note
• The camera’s flash mode will have no effect on the external flash. The external
flash will fire even when the camera’s flash mode is set to [$] (off).
• Confirm in advance that the external flash you are using is synchronized with
the camera.
Using the slave flash
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.
The amount of light emitted by the flash can be adjusted in 10 levels. The flash can
fire in sequential shooting mode, but the interval between shots will be longer if a
high emission level is set.
Flash mode automatically changes to [#] for all flash modes except [$].
Top menu [MODE MENU] [CAMERA] [QFLASH] [SLAVE]
1
Select an emission level from [1]
to [10], then press Z.
SLAVE FLASH
1
OK
GO
SELECT
49
Recording movies
This function allows you to record movies.
1
Compose your picture.
0.0
•
You can use the zoom lever to enlarge
your subject.
3
00:36
HQ
Remaining
recording time
2
3
Press the shutter button fully to
start recording.
•
The orange lamp blinks while the movie
is being saved.
•
During movie recording, the A mark
lights red.
00:36
HQ
Press the shutter button again to
stop recording.
•
When the remaining recording time has been used up, recording stops
automatically.
•
When there is space in the internal memory or the card, the remaining
TIPS
To record audio with the movie
To use the zoom during movie recording
j If you set [R] to [OFF], you can use the optical zoom during movie
50
Recording movies
Note
• The remaining recording time may drop rapidly during recording. Try using the
internal memory or card again after formatting it with your camera.
• In nmode, the flash and manual focus are not available.
Camera movement compensation
3
This function reduces the blur incurred by camera movement when taking movies.
The area in which the picture is captured by the CCD is adjusted according to
movement of the subject, thereby enabling recording of the picture with reduced
blurring of the subject. The images are recorded slightly larger when [h] is set to
[ON].
Top menu [h] [ON]
1
Take the picture.
0.0
Displayed during
camera
movement
compensation.
00:36
HQ
Note
• When the camera moves a lot or the subject is moving quickly, the
compensation function may not operate effectively.
• When taking pictures with the camera stabilized, set [h] to [OFF], otherwise
the movement of the subject may cause the image on the screen to move.
51
4 Advanced shooting functions
Advancedshooting
functions
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
4
Letting the camera select the optimal settings
is simple and easy, but if you want, you can be
a lot more creative. Now that you have
mastered basic operation, you can start
enjoying your camera’s more advanced
functions. You can adjust the shooting
conditions manually and try out different
effects.
For example, when taking pictures of flowers
on a tree, by reducing the aperture value and
focusing on the branch of the tree nearest to
you, you can make the flowers stand out
against a blurred background.
If it is evening, you can add a touch of color to
the night sky. By setting the white balance to
1(tungsten light), you can give the dark sky a
blue tone.
Adjusting a single function can produce
unexpected effects. Try various settings and
discover all sorts of new possibilities.
NOISE REDUCTION
AF MODE
FOCUS MODE
FULLTIME AF
PANORAMA
iESP
SPOT
AREA
PRESET WB
OK
CANCEL
SELECT
GO
53
Changing the aperture value for
shooting pictures
This function allows you to set the aperture manually. The camera sets the
shutter speed automatically. By decreasing the aperture value (F-number),
the camera will focus within a smaller range, producing a picture with a
blurred background. Increasing the value forces the camera to focus over
a wider range, resulting in increased depth of field in which both the subject
and the background are in focus. Use this mode when you want to play with
how the background is depicted.
4
Aperture value (F-number)
is decreased.
Aperture value (F-number)
is increased.
1
Press sr to set the aperture
Aperture value
value.
1/200 F4.0 0.0
s : Closes the aperture (increases the
aperture value).
r : Opens the aperture (decreases the
aperture value).
Adjustment range:
Wide angle : F2.8 to F8.0
Telephoto : F4.9 to F8.0
SQ1 1600 1200
4
×
•
When the exposure is correct, the aperture value is displayed in green.
When the correct exposure cannot be obtained, the aperture value is
displayed in red.
54
Changing the shutter speed for
shooting pictures
This function allows you to set the shutter speed manually. The camera
sets the aperture automatically. Set the shutter speed according to the
subject and the type of effect you want.
Setting a fast shutter speed lets you
capture fast-moving action as though it
was stopped in motion.
Setting a slow shutter speed blurs a
moving subject, giving the impression
of movement.
4
Shutter speed
1
Press sr to set the shutter
speed.
1/200 F4.0 0.0
s : Sets the shutter speed faster.
r : Sets the shutter speed slower.
Shutter speed range:
1/2 to 1/1000
(when [NOISE REDUCTION] is set
to [ON]: up to 4 seconds)
When the exposure is correct, the
shutter speed is displayed in green.
SQ1 1600 1200
4
×
•
When the correct exposure cannot be obtained, the shutter speed is
displayed in red.
Note
• To avoid camera movement, you are recommended to use a tripod when taking
pictures requiring a slow shutter speed.
55
Changing the aperture value and shutter
speed for shooting pictures
This mode gives you more creative control, allowing you to set the aperture
and shutter speed manually.
1
Adjust the aperture and shutter
speed.
Exposure differential
Aperture value
Shutter speed
p
: Closes the aperture (increases
the aperture value).
1/200 F4.0+2.0
q
: Opens the aperture (decreases
the aperture value).
s : Sets the shutter speed faster.
r : Sets the shutter speed slower.
4
Adjustment range:
Aperture value : F2.8 to F8.0
Shutter speed : 15" to 1/1000 (when
aperture value is
SQ1 1600 1200
4
×
F8.0: up to 1/2000)
•
•
When the shutter button is pressed halfway, the exposure differential from the exposure
metered as correct by the camera is shown as a range from -3.0EV to +3.0EV.
When the exposure differential is displayed in red, this range has been exceeded.
TIPS
To take long exposure (bulb) shots
1 Press r and set shutter speed to BULB.
2 The shutter remains open as long as the shutter button is pressed.
•
The maximum time that it can remain open is 8 minutes.
Note
• To avoid camera movement, you are recommended to use a tripod when taking
pictures requiring a slow shutter speed.
• The shutter speeds that can be set vary depending on the aperture value.
My Mode
You can take pictures using settings registered in [s MY MODE 1] to
[d MY MODE 4]. Only the settings in [sMY MODE 1] are preset.
Top menu [MODE MENU] [CAMERA] [r1/2/3/4]
[sMY MODE 1] / [EMY MODE 2] / [cMY MODE 3] /
[dMY MODE 4]
56
Focusing applications
AF mode (iESP/SPOT/AREA)
This function allows you to select how the camera focuses on your subject.
iESP
The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
Focus selection is based on the subject within the AF target mark.
Move the AF target mark to select the area you want to focus on to take
a picture.
SPOT
AREA
4
Subject suitable for [iESP]
Subject suitable for [SPOT]
Top menu [MODE MENU] [CAMERA] [AF MODE]
[iESP] / [SPOT] / [AREA]
(When [AREA] is selected
1
Use the arrow pad to move the AF target mark to the area
where you want to focus.
•
The AF target mark is displayed in green while the subject is moving. You
can take pictures while the AF target mark is displayed in green.
2
3
Hold down Z.
•
The position of the AF target mark is set.
•
To change the position of the AF target mark after it is set, hold down Z.
Take the picture.
•
The AF target mark remains at the same position even after the picture is
taken.
Note
• The AF target mark returns to the center position when the mode dial is turned
or the zoom lever is operated.
57
Focusing applications
Manual focus (FOCUS MODE)
If the subject cannot be accurately focused on with auto focus, set manual focus and
manually adjust the focus.
Top menu [MODE MENU] [CAMERA] [FOCUS MODE] [MF]
1
Press sr to set the focus.
1/200 F4.0 0.0
•
During operation, the focus area is enlarged.
This lets you check whether the focus area
is correct.
3m
1m
4
•
The distance indicator on the left of the
monitor is used for reference.
50cm
SQ1 1600 1200
4
×
2
3
Hold down Z.
1/200 F4.0 0.0
•
The focus is locked at the distance you
have set, and MF is displayed in red on
the monitor.
•
When Zis held down while MF is
displayed, the distance indicator is
displayed and the focus can be adjusted.
SQ1 1600 1200
4
×
Take the picture.
•
Set [FOCUS MODE] to [AF] to return to
auto focus.
TIPS
When you move the cursor to the top of the distance indicator, but the
camera cannot focus at ) (infinity).
j Press sr to make fine adjustments to the cursor position while viewing
the monitor.
Note
• Using the zoom lever after setting the focus may compromise the setting.
Perform the setting again.
58
Focusing applications
Fulltime AF
ON
Fulltime AF keeps the subject in front of the lens in focus at all times, without
having to press the shutter button halfway. The focusing time is reduced, so
you won’t miss snapshot opportunities. Also, the subject is automatically
kept in focus during movie recording.
OFF
Press the shutter button halfway to focus.
Top menu [MODE MENU] [CAMERA] [FULLTIME AF] [ON] / [OFF]
4
Note
• Setting [FULLTIME AF] to [ON] consumes more battery power.
• [FULLTIME AF] cannot be used when [R] is set to [ON] in nmode.
AF lock
The focus position can be locked. AF lock refers to locking the focus position. Be
sure to register the AF lock function to the [ button (custom button) before use.
AF lock mark
1
2
Position the AF target mark on
the desired subject and press the
[ button.
1/200 F4.0 0.0
•
The focus is locked, and the AF lock
mark is displayed.
AF LOCK
•
To reset the AF lock, press the [
button again. Press the [ button to
engage and disengage the AF lock.
SQ1 1600 1200
4
×
Press the shutter button fully.
59
Focusing applications
TIPS
To save the locked focus position after
taking a picture (AF memory)
j Hold down the [ button for more
than 1 second to display the AF memory
mark. The focus is locked while the AF
memory mark is displayed. Press the
[ button again to cancel the AF
memory.
AF memory mark
1/200 F4.0 0.0
AF MEMORY
SQ1 1600 1200
4
×
When the AF lock was canceled even
though it was engaged
j Do not operate any of the buttons or the
4
mode dial after performing the AF lock. Doing so will cancel the AF lock.
j When the camera reactivates after sleep mode, or the power or monitor is
turned off, the AF lock is canceled.
Note
• If the zoom is operated after engaging the AF lock, the picture may be out of
focus. Engage the AF lock after operating the zoom.
AF illuminator
This function enables you to focus on dark
subjects with the auto focus.
AF illuminator
ON
When you press the shutter button
halfway, the AF illuminator lights
automatically to illuminate the subject.
OFF The AF illuminator does not light.
Top menu [MODE MENU] [SETUP] [AF ILLUMINATOR]
[ON] / [OFF]
Note
• When a conversion lens is attached to the camera, or when taking pictures of
a subject 50 cm (1.6 ft.) or closer, the AF illuminator lights but the subject may
not be in focus.
60
Changing the area for measuring the brightness of a subject (ESP/Spot)
Changing the area for measuring the
brightness of a subject (ESP/n)
When taking pictures against backlight, the face of the subject may appear
darker. With spot metering, the picture can be taken based on the
brightness at the center of the monitor without being affected by the light
in the background.
ESP
Meters the brightness at the center of the monitor and the surrounding
area separately to create a picture with balanced brightness. When
taking pictures against strong backlight, the center of the picture may
appear dark.
n
4
Only the center of the monitor is metered. Suitable for taking a picture
of the subject in the center of the monitor against backlight.
Meters the brightness over a wide area with emphasis on the center of
the screen. This method is used when you do not want to allow
surrounding light to affect the picture.
4
Top menu [MODE MENU] [CAMERA] [ESP/n] [ESP] / [n] / [4]
AE lock
This function is suitable for situations when optimum exposure is difficult
to achieve, such as when there is excessive contrast between the subject
and the surroundings.
Ex:
The landscape appears
dark because the sky is
bright.
Recompose your picture so
there is not much sky in the
frame and lock the exposure.
Compose your picture again
with the sky in the frame and
take the picture.
61
AE lock
1
Compose your picture so that you
can lock the exposure, and press
the [ button.
1/200 F4.0 0.0
•
•
The meter reading is saved.
To reset the AE lock, press the [
button again. Press the [ button to
engage and disengage the AE lock.
When a function other than AE lock is
assigned to the [ button, reassign the
SQ1 1600 1200
4
×
While the AE lock is engaged,
is displayed.
•
B
4
3
Position the AF target mark on the
subject you want to focus on, and
press the shutter button halfway.
1/200 F4.0 0.0
•
The green lamp lights.
Press the shutter button fully.
•
The AE lock is automatically canceled
when the picture is taken.
SQ1 1600 1200
4
×
TIPS
To save the locked meter reading after taking a picture (AE memory)
j After setting the AE lock in Step 1, or after pressing the shutter button
halfway in Step 2, press the [ button for more than 1 second. C is
displayed. The exposure is saved while C is displayed. Press the [
button again to cancel the AE memory.
When the AE lock was canceled even though it was engaged
j Do not operate any of the buttons or the mode dial after performing the AE
lock. Doing so will cancel the AE lock.
j When the camera reactivates after sleep mode, or the power or monitor is
turned off, the AE lock is canceled.
62
Changing ISO sensitivity (ISO)
The higher the ISO, the better the camera’s light sensitivity and ability to
shoot in low light conditions. However, high sensitivity introduces noise
into the resulting picture, which may give it a grainy appearance.
AUTO
Sensitivity is automatically adjusted according to the conditions of
the subject.
64/100/200/
400 (SP-310)
50/100/200/
400 (SP-350)
With a low ISO setting, you can shoot clear, sharp images in
daylight. With a high ISO setting, you can shoot in dark places.
Top menu [MODE MENU] [CAMERA] [ISO]
[AUTO] / [50] or [64] / [100] / [200] / [400]
4
Note
• ISO is based on the sensitivity of normal camera film.
Changing picture brightness
In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually. You can adjust the
exposure in the range of ±2.0 EV in 1/3 EV steps. When the exposure is
changed, you can check the result on the monitor.
1
2
Press pq.
1/200 F4.0+2.0
•
Adjust toward [+] to brighten the image
or [–] to darken the image.
Take the picture.
SQ1 1600 1200
4
×
63
Adjusting the white balance
TIPS
• Often, bright subjects (such as snow) turn out darker than their natural colors.
Adjust toward [+] to make these subjects closer to their real shades. To prevent
the picture from getting brighter, adjust toward [–] when shooting dark subjects.
Note
• Sometimes, using the flash may not produce the brightness (exposure) that
was intended.
• The effects of exposure compensation may be limited when the surroundings
of the subject are extremely bright or dark.
4
Adjusting the white balance
The color of the subject differs depending on lighting conditions. For instance,
when daylight, the setting sun or tungsten lighting are reflected on white paper,
the shade of white produced will be slightly different for each. By adjusting the
white balance, you can achieve more natural-looking colors.
AUTO
PRESET
Automatically adjusts the white balance for any light source.
Selects the white balance according to the light source.
5
3
4
1
For shooting on a sunny day.
For shooting on a cloudy day.
For shooting in evening sunlight.
For shooting under a tungsten light (3,000K)*.
For shooting under a daylight fluorescent lamp (6,700K)*.
This type of lamp is used mainly in homes.
w
x
For shooting under a neutral white fluorescent lamp
(5,000K)*. This type of lamp is generally used in desk lamps,
etc.
y
For shooting under a white fluorescent lamp (4,200K)*. This
type of lamp is generally used in offices, etc.
* The color temperature values (K) are approximate. They are not an
accurate indication of color.
V
For setting a more precise white balance than preset white balance
can provide. To set the optimum white balance for the shooting
conditions, point the camera at a white object under the light source
you want to use and save the white balance.
64
Adjusting the white balance
Top menu [MODE MENU] [PICTURE] [WB]
[AUTO] / [PRESET] / [V]
(When [PRESET] is selected
1
Select a white balance setting,
and press Z.
PRESET WB
4
(When [V] is selected
OK
GO
CANCEL
SELECT
1
With the [ONE TOUCH WB]
screen displayed, point the
camera at a sheet of white paper.
ONE TOUCH WB
•
Position the paper so that it fills the
screen, making sure there are no
shadows.
OK
GO
CANCEL
2
Press Z.
•
The new white balance is set.
1/200 F4.0 0.0
SQ1 1600 1200
4
×
One-touch white balance
TIPS
• You can also select a different preset white balance from the one
recommended and enjoy interesting results on the monitor.
65
Adjusting the white balance
Note
• White balance may not be effective under some special light sources.
• When taking pictures with the white balance on a setting other than [AUTO],
play back the picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than [AUTO], colors
may appear different in the resulting picture from the colors you see on the
monitor.
• When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
White balance compensation
4
This function allows you to set the white balance compensation and make fine
changes to the currently set white balance.
Top menu [MODE MENU] [PICTURE] [>]
1
Press sr to adjust the white
balance, and press Z.
BLUE
•
The color becomes more blue each
time you press s, and more red
each time you press r.
•
The white balance can be adjusted in
7 increments in both the [RED] and
[BLUE] directions.
RED
OK
GO
SELECT
WB compensation indicator
66
Adjusting a picture for recording (SHARPNESS/
CONTRAST/SATURATION)
These functions adjust the sharpness, contrast and color strength of a
picture.
SHARPNESS
CONTRAST
This function adjusts the sharpness of the picture.
This function adjusts the contrast of the picture. For example, you
can make pictures with marked differences in light and shadow
softer, and those with less differences more vivid.
SATURATION
This function adjusts the color strength.
Top menu [MODE MENU] [PICTURE] [SHARPNESS] /
4
1
Press sr to adjust the hue
between [-5] and [+5].
(When [SHARPNESS] is
WB
selected
SHARPNESS
CONTRAST
0
•
Toward + : The image contours are
emphasized, making the
image appear sharper
When [SHARPNESS] is
selected
and more vivid. Use this
setting when you want to
print pictures. If you adjust the sharpness too far toward +,
noise may become conspicuous in the picture.
•
Toward – : The image contours are softened. Use this setting when you
want to edit images on a computer.
(When [CONTRAST] is selected
•
•
Toward + : The light and dark areas are defined more clearly, making
the image look crisper.
Toward – : The light and dark areas become less defined, giving the
image a softer impression. Use this setting when you want
to edit images on a computer.
(When [SATURATION] is selected
•
•
Toward + : Colors become stronger.
Toward – : Colors become weaker.
67
Reducing picture noise (NOISE REDUCTION)
When shooting in dark places, shutter speeds become slower as there is
less light focused on the CCD. During long exposures, signals are
generated by parts of the CCD where no light is focused and are recorded
on the picture as noise. When [NOISE REDUCTION] is set to [ON], the
camera automatically reduces this noise to produce clearer pictures.
ON
OFF
Noise is reduced. Shooting time takes
twice as long as usual. Noise reduction
can only be used when the shutter
speed is slower than 1/2 sec.
Noise is not reduced. Noise may be
conspicuous at slow shutter speeds.
4
The purpose of these pictures is to illustrate the effects of noise reduction. They are
not actual pictures taken with this camera.
Top menu [MODE MENU] [CAMERA] [NOISE REDUCTION]
[ON] / [OFF]
Note
• When [NOISE REDUCTION] is set to [ON], the camera implements noise-
reducing processes after each shot. For this reason, shooting time is
approximately twice as long as usual. During this time, the next picture cannot
be taken.
• This function may not work effectively with some shooting conditions or
subjects.
68
5 Additional shooting functions
Additionalshooting
functions
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
5
At a party or family gathering...
Use the self-timer function to take group
photos at school reunions or birthday parties.
At a sporting event...
Use sequential shooting mode to take a
succession of shots of a goal and pick out the
best ones later.
In the outdoors or at scenic sites...
Use panorama mode to capture a beautiful
mountain range or impressive building.
69
Sequential shooting
There are 4 sequential shooting modes: sequential shooting, high speed
sequential shooting, AF sequential shooting and auto bracketing (7).
o
j
Shoots 1 frame at a time when the shutter button is pressed.
Focus, exposure and white balance are locked at the first frame.
The sequential shooting speed varies depending on the record mode
setting.
i
k
7
Pictures can be taken at a faster speed than normal sequential
shooting.
Adjusts the focus 1 frame at a time. The shooting speed is slower than
for normal sequential shooting.
Takes pictures sequentially while changing the exposure for each
frame. The focus and white balance are locked at the first frame.
Ex: When the exposure differential is set to [±1.0] with [7] and the number of
frames is set to [×3]
5
-1.0
0.0
+1.0
(j / i / k
Top menu [MODE MENU] [CAMERA] [DRIVE]
1
Take the picture.
•
Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button. You can only take 2
frames at a time with high speed sequential shooting.
•
You are recommended to use the viewfinder for sequential shooting. During
high speed sequential shooting, the subject does not appear on the monitor.
(7
Top menu [MODE MENU] [CAMERA] [DRIVE] [7]
70
Timelapse shooting
1
2
Select the exposure differential
and number of shots and press
BKT
Z
.
0.3
0.7
1.0
×3
×5
Take the picture.
•
Press the shutter button fully and keep it
pressed to shoot the preset number of
pictures. You can stop shooting at any
time by releasing the shutter button.
OK
GO
CANCEL
SELECT
Note
• In [i] and [7] modes, the built-in flash is not available.
• The external flash does not fire in [7] mode (SP-350).
• Sequential shooting is not available when [NOISE REDUCTION] is set to [ON].
• [j] and [k] are not available when record mode is set to [RAW].
• As the maximum shutter speed is set to 1/30 sec., adequate exposure is not
obtained when shooting a dark subject in modes other than S and M.
• If the battery power is low and f blinks during sequential shooting, shooting
stops and the camera starts saving the pictures you have taken. Whether or not
all of the shots are saved depends on how much battery power remains.
5
Timelapse shooting
Shooting is automatically repeated as defined by set conditions. This is
suitable, for example, for taking regular pictures of the opening of a flower
bud. If you will be taking pictures over a long period, make sure to use fully
charged batteries or the AC adapter.
Top menu [MODE MENU] [CAMERA] [TIMELAPSE] [ON]
1
Set [PICTURES] and [INTERVAL].
sr : Selects [PICTURES] and
[INTERVAL].
TIMELAPSE
PICTURES
02
Sets the value.
INTERVAL
01 MIN
pq : Selects the setting.
Adjustment range
OK
GO
SELECT
SET
Number of shots : 2 to 99
Shooting interval : 1 to 99 minutes in 1 minute intervals
71
Self-timer shooting
2
3
Press Z.
Press the shutter button.
1/200 F4.0 0.0
•
The first picture is taken, and the
pictures thereafter are automatically
taken.
•
•
During timelapse, the Lmark lights.
When recording to either the internal
memory or the card, and after the first
picture is taken, the camera enters
sleep mode. The camera automatically
SQ1 1600 1200
4
×
reactivates from sleep mode 4 seconds prior to taking the next picture.
When the preset number of pictures is taken, the camera automatically
turns off.
•
Note
5
• If any of the following operations occur during sleep mode, the camera cancels
the timelapse mode and returns to normal shooting.
Opening the battery compartment cover, opening the card cover,
connecting the camera to a computer, operating the shutter button, arrow
pad or other button.
• From 4 seconds prior to taking a picture until the time the picture has been
taken, all operation buttons, the mode dial and zoom lever do not function.
• If the internal memory/card becomes full or the battery power runs out during
sleep mode, a warning is displayed, timelapse stops and the camera
automatically turns off.
Self-timer shooting
This function lets you take pictures using the self-timer. Fix the camera
securely on a tripod for self-timer shooting. This function is useful for taking
pictures when you want to be included in the photograph.
Top menu [MODE MENU] [CAMERA] [Y] [ON]
For h: Top menu [Y] [ON]
72
Panorama shooting
Self-timer lamp
1
Press the shutter button fully to
take the picture.
•
Pressing the shutter button halfway locks
the focus and exposure.
•
The self-timer lamp lights for
approximately 10 seconds, then starts
blinking. After blinking for approximately 2
seconds, the picture is taken.
•
The self-timer mode is automatically canceled after one shot.
Panorama shooting
You can take advantage of panorama shooting with Olympus cards (xD-
Picture Card). Panorama shooting lets you connect pictures with
overlapping edges into a single panoramic picture, using the OLYMPUS
Master software.
5
The part of the previous picture where it will be joined to the next picture does not
remain in the frame on the edge of the screen. You have to remember what the
part in the frame looked like and take the next picture so it overlaps. Compose your
shots so that the right edge of the previous picture overlaps the left edge of the next
picture if you are connecting pictures from left to right (or vice versa if you are
connecting pictures from right to left).
Top menu [MODE MENU] [CAMERA] [PANORAMA]
73
Recording sound with still pictures
1
Use the arrow pad to choose at
which edge you want to
connect the pictures.
q
: The next picture is connected at
the right edge.
p
: The next picture is connected at
the left edge.
Connects pictures from
left to right
s : The next picture is connected at
the top.
r : The next picture is connected at the bottom.
2
3
Make sure that the edges of the pictures overlap, then take
the pictures.
•
The focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
You cannot adjust the zoom after the first picture.
Panorama shooting is possible for up to 10 pictures. When you have taken
10 pictures, a warning mark gis displayed.
•
•
5
Press Zto exit panorama shooting.
Note
• Panorama mode is not available when there is no card in the camera.
Panorama mode is only available with Olympus cards.
• During panorama shooting, the flash, sequential shooting, and recording sound
with still pictures are not available.
• The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.
Recording sound with still pictures
Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.
Top menu [MODE MENU] [CAMERA] [R] [ON]
74
Changing the monitor display (y)
Microphone
1
Take the picture.
•
When recording starts, aim the camera
microphone at the source of the sound
you want to record.
TIPS
• H is displayed when still pictures with sound are played back. During
playback, sound is output from the speaker. The volume can be adjusted.
• Sound can be added later to still pictures. Recorded sound can also be re-
5
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• Pictures cannot be taken during sound recording.
• Recording sound with still pictures is not available during sequential shooting,
panorama shooting, or timelapse.
• Sound recording may also pick up camera noises, such as button operations,
shutter movement, etc.
• Sound recording may not be possible if there is insufficient space in the internal
memory or the card.
Changing the monitor display
(DISP./GUIDE)
This function displays histograms and lines that help you to compose your
pictures. You can hide the shooting information from being displayed on
the monitor and turn off the monitor.
75
Changing the monitor display (y)
1
Press the DISP./GUIDE button repeatedly.
•
Press the DISP./GUIDE button to change the display in the following order.
Displays the regular shooting information.
Displays only the AF target mark.
1/200 F4.0 0.0
SQ1 1600 1200
4
×
1/200 F4.0 0.0
1/200 F4.0 0.0
The monitor turns off.
5
4
SQ1 1600 1200
4
×
Displays a histogram
Displays lines. The lines
displayed will change
depending on the
[FRAME ASSIST]
setting.
This screen is not
displayed in nmode.
This screen is not
displayed if [FRAME
ASSIST] is [OFF].
showing the luminance
distribution of the
picture.
This screen is not
displayed in nmode.
This screen is not
displayed if [u] is
[OFF].
TIPS
• Information is displayed on the monitor when the display is changed or menu
operations are performed. For details about displayed information, refer to
“Monitor Symbols & icons” in the “Basic Manual”.
Histogram
This displays the histogram. You can take pictures while checking the contrast of the
subject, thereby enabling you to closely control the exposure.
OFF
The histogram is not displayed.
The histogram is displayed.
ON
DIRECT
Displays the black and white areas directly on the picture.
When [DIRECT] is enabled, the histogram in playback mode is also
displayed directly on the picture.
76
Changing the monitor display (y)
Top menu [MODE MENU] [SETUP] [u] [OFF] / [ON] / [DIRECT]
TIPS
How to read the histogram
1
1 If the peak fills too much of the frame, the image will
appear mostly black.
2
2 If the peak fills too much of the frame, the image will
appear mostly white.
3
3 The part indicated in green in the histogram shows
the luminance distribution within the AF target mark.
Black and white areas
Red dots: Mainly white area
Blue dots: Mainly black area
5
Note
• The histogram displayed during shooting may differ from the histogram
displayed during playback.
Frame assist
This displays the frame assist and determines the type of frame assist. Refer to this
when composing your picture.
OFF Does not display lines.
w
x
Displays horizontal and vertical lines.
Displays diagonal lines.
Top menu [MODE MENU] [SETUP] [FRAME ASSIST]
77
Playback
ꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ
6
With film-type cameras, you cannot see the
pictures you have taken until the film has been
developed. And aren’t you sometimes
disappointed with the results when you do
eventually see them? Pictures of blurred
scenery or someone with their eyes shut. Or
maybe you took several pictures of the same
scene because you weren’t sure whether they
would come out or not. That’s no way to record
important memories!
With a digital camera, you can review your
pictures immediately. Just play the picture
back as soon as you’ve taken it. If you don’t
like what you see, erase and take it again. So
don’t be afraid of pictures not coming out well-
just keep on pressing that shutter button!
NO!
OK!
SAVE!
78
Playing back still pictures
The pictures on a card are played back if a card is inserted in the camera.
Remove the card to play back pictures stored in the internal memory.
•
•
•
The last picture taken is displayed on the monitor (single-frame playback).
You can use this function in shooting mode by pressing the QUICK VIEW button.
1Use the arrow pad to browse the pictures.
Push or pull the zoom lever toward W or T.
•
You can view the pictures close up (close-up playback), as a thumbnail
(index display), or in calendar form (calendar display).
100 0004
SQ1
:
’05. 09. 26 12 30
4
W
T
T
W
1
3
2
4
6
Index display
• Use the arrow pad to
select the picture to play
back, and press Zto
return to single-frame
playback.
• Push the lever toward W
to display the pictures in
4, 9, 16 or 25 frames.
T
T
T
W
Close-up playback
1
2
5
8
3
6
9
• Repeatedly pull the lever
toward T to incrementally
enlarge the picture up to
10 times the original size.
• Press the arrow pad
during close-up playback
to scroll the picture in the
indicated direction.
4
7
W
• Pictures cannot be stored
in an enlarged state.
W
Calendar display
2005
Fri Sat
9Sun Mon Tue Wed Thu
28
29
30
31
1
2
9
3
• In 25-frame index display, push
the lever toward W to play back
the pictures in a calendar.
• Use the arrow pad to select a
date with a picture and press Z,
or pull the zoom lever toward T
to return to single-frame
4
5
6
7
8
10
17
24
1
W
11
18
25
2
12
19
26
3
13
20
27
4
14
21
28
5
15
22
29
6
16
23
30
7
8
playback.
79
Playing back still pictures
Playing back pictures in a calendar (CALENDAR)
This function allows you to display the pictures you have taken in a calendar format.
When a still picture or movie is recorded, it is automatically registered to the calendar
by the date of recording.
You need to have the date and time set on the camera before shooting if you want
your pictures to be played back on the correct date with the calendar display.
Top menu [CALENDAR]
•
A monthly calendar is displayed. Select the date of the pictures to play back and
press Z. Each frame is played back.
Picture rotation
Pictures taken with the camera held vertically are displayed horizontally. This
function lets you turn such pictures 90° clockwise or counterclockwise so that they
are displayed vertically.
Select the picture that you want to rotate and display the top menu.
6
Top menu [MODE MENU] [PLAY] [y] [+90°] / [0°] / [-90°]
•
For album playback mode: Top menu [ALBUM MENU] [y]
[+90°] / [0°] / [-90°]
100 0004
SQ1
100 0004
SQ1
100 0004
SQ1
:
26 12 30
4
:
26 12 30
4
:
26 12 30
4
’05
.
09
.
’05
.
09
.
’05
.
09
.
+90°
0°
-90°
Note
• The following pictures cannot be rotated.
Movies, protected pictures, computer-edited pictures, and pictures taken
with another camera
• New picture orientations are saved even when the power is turned off.
80
Playing back movies
This function lets you playback movies. You can fast forward the movie or
play it back one frame at a time.
Select the movie that you want to play, then display the top menu.
Top menu [MOVIE PLAY]
•
The movie is played back. When playback
ends, the camera automatically returns to the
beginning of the movie and displays the
[MOVIE PLAY] menu.
MOVIE PLAY
RESTART
EXIT
OK
GO
SELECT
(Operations during movie playback
Change the volume or speed during playback.
s : Increases the volume.
r : Reduces the volume.
100 0004
SQ
q
: Each time you press the button, the
playback speed changes in the following
order: 2×; 20×; and back to 1×.
6
:
’05. 09. 26 12 30
: :
00 00/00 36
p
: Plays the movie in reverse. Each time you
press the button, the playback speed
changes in the following order: 2×; 20×;
and back to 1×.
Z : Pauses the movie.
(Operations during pause
You can play back the movie frame by frame.
s : Displays the first frame.
r : Displays the last frame.
q
p
: Displays the next frame.
: Displays the previous frame.
Z : The [MOVIE PLAY] screen is displayed.
Playing time/Total recording time
Note
: :
00 00/00 36
• The orange lamp blinks while the camera is reading the movie. Reading of
movies may take some time. Do not open the card cover while the orange lamp
is blinking. Doing so may damage the data in the internal memory or the card
and render the internal memory or card unusable.
81
Playing back movies
Selecting the position to begin movie playback
(INDEX PLAY)
This function displays a movie with a time index, allowing you to play back the movie
from the desired frame.
Top menu [MODE MENU] [PLAY] [INDEX PLAY]
1
2
Press srpq to select a frame.
•
Push or pull the zoom lever to change
the number of displayed index frames.
Press Z.
•
Movie playback begins from the
selected frame.
6
82
Playing back albums
Pictures recorded to the card can be organized by sorting them into
albums.
Pictures stored in the internal memory cannot be entered in albums.
You can enter up to 100 pictures into each of the available 12 albums.
Using the provided OLYMPUS Master software, you can enter pictures
from a computer into an album on a card.
(Album playback mode menu
To enable album playback mode, select [ALBUM] on the top menu in normal
playback mode. Press Zin album playback mode to display the album playback
ALBUM MENU
Select [ALBUM MENU] on the top menu in album playback mode to display the
[ALBUM MENU] screen.
ALBUM MENU
OFF
°
0
SELECT TITLE IMAGE
UNDO ENTRY
6
Functions that can be set in [ALBUM MENU]
Ref.
Ref.
Page
Function
Function
Page
0
y
SELECT TITLE IMAGE
UNDO ENTRY
s
Adding pictures to an album (ALBUM ENTRY)
You can enter pictures or movies in an album.
Top menu [MODE MENU] [PLAY] [ALBUM ENTRY]
83
Playing back albums
1
2
Select the album entry method.
ALBUM ENTRY
SEL. IMAGE
Selects one frame at a
time for entry.
SEL. IMAGE
SET CALENDAR
SET ALL
SET CALENDAR Selects a date on the
calendar display, and
enters one picture from
that date into the album.
CANCEL
OK
GO
SELECT
SET ALL
Selects all still pictures,
or all movies, or all
protected pictures, and enters them into one album.
Press pq to select an album, and
press Z.
SEL. ALBUM
1
5
9
3
4
8
2
6
7
10
11
12
OK
GO
SELECT
(SEL. IMAGE
6
3
Press srpq to select a picture
to enter the album, and press Z.
SEL. IMAGE
1
5
9
2
6
3
7
4
8
•
•
•
•
R is displayed on the selected picture.
Press Zagain to cancel the selection.
Repeat Step 3 to enter multiple pictures.
Pull the zoom lever toward T to display a
picture using single-frame playback.
10
EXIT
11
12
OK
OK
HOLD
GO
4
5
After selecting all the pictures to enter, hold down Z.
Select [YES], and press Z.
84
Playing back albums
(SET CALENDAR
3
4
Press srpq to select the date
with pictures to enter in the
album, and press Z.
2005
Fri Sat
9Sun Mon Tue Wed Thu
28
29
30
31
1
2
9
3
10
17
24
1
4
5
6
7
8
11
18
25
2
12
19
26
3
13
20
27
4
14
21
28
5
15
22
29
6
16
23
30
7
Select [YES], and press Z.
8
(SET ALL
3
4
Select [PHOTO], [MOVIE] or
[0], and press Z.
SET ALL
PHOTO
MOVIE
Select [YES], and press Z.
OK
GO
SELECT
6
Note
• The same picture cannot be entered in multiple albums.
Viewing pictures in albums (SEL. ALBUM)
Top menu [ALBUM]
1
2
Press Z.
•
The top menu of the album playback
mode is displayed.
CLOSE ALBUM
ALBUM MENU
Select [SEL. ALBUM].
SEL. ALBUM
UNDO ENTRY
HOLD
85
Playing back albums
3
4
Press srpq to select an
album to view, and press Z.
SEL. ALBUM
1
5
9
2
6
3
4
8
•
The title image for each album is
displayed.
7
10
11
12
OK
GO
SELECT
Use the arrow pad to display
the picture you want.
q
p
: Displays the next picture.
: Displays the previous picture.
s : Jumps to the picture 10 frames
back.
r : Jumps to the picture 10 frames
ahead.
•
When playing back still pictures, pull
the zoom lever toward T for close-up playback. During close-up playback,
use the arrow pad to scroll.
5
To exit album display, press Zto display the top menu, and
select [CLOSE ALBUM].
6
TIPS
• To display pictures from other albums, select [SEL. ALBUM] from the top menu,
and select the album to view.
Selecting an album cover (SELECT TITLE IMAGE)
You can change the title image (first frame in album) displayed on the [SEL. ALBUM]
screen.
Select the album to change, then display the top menu.
Top menu [ALBUM MENU] [SELECT TITLE IMAGE]
1
2
Press pq to select the picture for
SELECT TITLE IMAGE
the title image, and press Z.
Select [OK], and press Z.
OK
CANCEL
•
The title image for the album is
changed.
OK
SELECT
GO
86
Playing back albums
Undoing album entries (UNDO ENTRY)
You can cancel pictures entered in an album. The picture will still be saved on the
card. This only removes the picture from the album.
Select the album containing the picture to undo, then display the top menu.
Top menu [ALBUM MENU] [UNDO ENTRY]
1
Select the album undo method,
and press Z.
UNDO ENTRY
SEL. IMAGE
UNDO ALL
CANCEL
SEL. IMAGE
Selects one frame at a
time to undo.
UNDO ALL
This will undo all images
in the album.
OK
GO
SELECT
(SEL. IMAGE
2
Press srpq to select the
SEL. IMAGE
pictures to undo, and press Z.
1
2
6
3
4
8
•
•
•
•
R is displayed on the selected picture.
Press Zagain to cancel the selection.
Repeat Step 2 to undo multiple pictures.
Pull the zoom lever toward T to display a
picture using single-frame playback.
6
5
9
7
10
11
12
OK
OK
HOLD
GO
EXIT
3
4
After selecting all the pictures to undo, hold down Z.
Select [YES], and press Z.
(UNDO ALL
2
Select [YES], and press Z.
UNDO ALL
YES
NO
OK
GO
SELECT
87
Playing back albums
Erasing pictures from albums
You can erase pictures entered in an album. Unlike undoing album pictures, this
erases the picture from the card.
Display and erase a picture from an album.
Note
• You cannot erase protected pictures. Cancel protection before erasing such
• Once erased, pictures cannot be restored. To only remove pictures from the
1
Select the picture you want to
erase, and press the Sbutton.
ERASE
YES
NO
6 2 Select [YES], and press Z.
OK
SELECT
GO
88
Slideshow
This function displays still pictures stored in the internal memory or the
card one after another. You can select from 9 different transition effects.
Only the first frame of each movie is displayed.
NORMAL
The pictures are played back one at a time.
SCROLL
The current picture scrolls off the screen to the left as the next picture scrolls onto
the screen from the right.
FADER
The current picture gradually fades out as the next picture gradually fades in.
ZOOM DOWN
The camera gradually zooms out from the current picture until it disappears into the
center of the screen. The next picture then appears in the center of the screen, and
the camera gradually zooms in on the picture until it is full size.
ZOOM UP
The camera gradually zooms in on the current picture until it disappears. The next
picture is displayed with the center enlarged, and the camera then gradually zooms
out until the picture is full size.
6
CHECKERBOARD
The next picture is displayed with a mosaic pattern that gradually disappears to
reveal the picture.
BLINDS
The next picture is displayed over the current picture with an effect that resembles a
set of blinds opening.
SWIVEL
The current picture is reduced in size and spins off the screen to left as the next
picture spins onto the screen from the right and is enlarged to full size. The three-
dimensional movement of the two pictures resembles a spinning cube.
RANDOM
The slideshow is displayed with a randomly selected transition effect for each frame
([SCROLL], [FADER], [ZOOM DOWN], [ZOOM UP], [CHECKERBOARD],
[BLINDS], or [SWIVEL]).
89
Slideshow
•
For album playback mode: Top menu [m]
1
Select a transition effect for the
slideshow, and press Z.
NORMAL
SCROLL
•
•
The slideshow starts.
The slideshow will not stop until you
cancel it by pressing Z.
FADER
ZOOM DOWN
OK
GO
CANCEL
SELECT
Note
• You are recommended to use the optional AC adapter when running a
slideshow for a long period of time. The camera will enter sleep mode after
about 30 minutes and stop the slideshow automatically.
6
90
Adding sound to still pictures
Sound can be added to a still picture that you have already taken. You can
also re-record over the sound that has already been recorded. Total
recording time per picture is approximately 4 seconds.
Select the still picture to which you want to add sound and display the top
menu.
1
Press q to display [START].
START
Microphone
2
Aim the camera microphone
toward the sound you want to
record, and press Zto start
recording.
6
•
The [BUSY] bar is displayed during
recording.
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• If you re-record the sound, the original sound is erased.
• Sound recording is not possible if there is insufficient space in the internal
memory or on the card.
• The microphone may pick up the sound of buttons operated.
• Once sound is added to a picture, it is not possible to erase the sound. In this
case, make a re-recording with silence.
91
EBELdAitdiCnigKtis&ntilWlgpHicsItTutEriel/SslE(pRPiAIcAW)tuDrAeTAsE(DRITA/RWesizDingA/TTrimAmEingD/RITED/EYE FIX/
/REDEYE FIX/BLACK & WHITE/SEPIA)
Q/
P
This function lets you edit still pictures and save them as new pictures. The
following editing operations are possible.
RAW DATA EDIT Adjusts the pictures recorded in raw data format and stores
them as new pictures in JPEG format. You can check the result
on the monitor and make sure the desired effect has been
achieved.
The following items can be edited with [RAW DATA EDIT].
Ref.
Item
Settings
Page
P. 64
K
SHQ, HQ, SQ1, SQ2
AUTO, PRESET, V*
RED7 – BLUE7
-5 – +5
WB
>
SHARPNESS
CONTRAST
SATURATION
-5 – +5
-5 – +5
* Only available when the picture is taken with [WB] set to [V].
Changes the image size to 640 × 480 or 320 × 240 and saves
the picture as a new file.
Crops part of a picture and saves it as a new file.
Corrects the red-eye phenomenon caused by the flash making
the subject’s eyes appear red in the picture, and saves the
picture as a new file.
Q
6
P
REDEYE FIX
BLACK & WHITE Changes the picture to black and white and saves it as a new
file.
SEPIA
Changes the picture to sepia and saves it as a new file.
Select the picture that you want to edit and display the top menu. To use the [RAW
DATA EDIT] function, select a picture taken with [K] set to [RAW].
Top menu [EDIT]
1
Select [RAW DATA EDIT], [Q],
[P], [REDEYE FIX], [BLACK &
RAW DATA EDIT
WHITE], or [SEPIA], and press q.
REDEYE FIX
BLACK & WHITE
92
Editing still pictures (RAW DATA EDIT/
Q
/P
/REDEYE FIX/BLACK & WHITE/SEPIA)
2
Edit the picture.
(When [RAW DATA EDIT] is
RAW DATA EDIT
selected
1 Select an editing option, and press Z.
WB
AUTO
PRESET
2 When you have finished editing the
SHARPNESS
CONTRAST
data, press Z.
3 Select [OK], and press Z.
(When [Q] is selected
1 Select [640 × 480] or [320 × 240],
and press Z.
640×480
320×240
CANCEL
OK
CANCEL
SELECT
GO
(When [P] is selected
1 Select [NEW FILE], and press Z.
6
2 Adjust the trimming position and
size.
srpq
Adjusts the position of
the picture.
Zoom lever Adjusts the size of the
picture.
3 Press Z.
4 Select [OK], and press Z.
OK
GO
(When [REDEYE FIX] is
selected
1 Select [NEW FILE], and press Z.
•
After the [BUSY] bar is displayed,
the areas targeted for correction
are framed in blue.
2 Press Z.
OK
GO
CANCEL
•
When the blue frame is not
displayed, red-eye correction is not available.
93
Editing still pictures (RAW DATA EDIT/
Q
/
P
/REDEYE FIX/BLACK & WHITE/SEPIA)
(When [BLACK & WHITE] or
BLACK & WHITE
[SEPIA] is selected
1 Select [NEW FILE], and press Z.
NEW FILE
CANCEL
OK
GO
CANCEL
SELECT
When [BLACK & WHITE] is
selected
•
The [BUSY] bar is displayed and after the
image is saved, the camera returns to the playback mode.
Note
• Editing with [RAW DATA EDIT], [Q], [P], [REDEYE FIX], [BLACK & WHITE],
or [SEPIA] is not possible in the following cases:
If there is insufficient space in the internal memory or the card, or for
movies, pictures edited with a computer, pictures taken with another
camera, or pictures in raw data format (not including [RAW DATA EDIT]).
6
94
Creating composite pictures (FRAME/
TITLE/CALENDAR/LAYOUT)
This function lets you add frames, titles or a calendar to still pictures and
save them as new pictures. You can also create an index layout of
selected pictures and save it as a new picture. The following picture
composite operations are possible.
FRAME
TITLE
CALENDAR
LAYOUT
Adds a selected frame to a picture and saves it as a new picture.
Adds a selected title to a picture and saves it as a new picture.
Adds a calendar to a picture and saves it as a new picture.
Creates an index layout of pictures selected in normal playback,
album playback or calendar display, and saves it as a new picture.
Top menu [EDIT] [FRAME] / [TITLE] /[CALENDAR] / [LAYOUT]
1
Select [NEW FILE], and press Z.
FRAME
NEW FILE
CANCEL
6
OK
GO
CANCEL
SELECT
When [FRAME] is selected
2
Add a decoration.
(When [FRAME] is selected
1 Press pq to select a frame, and
press Z.
SEL. IMAGE
2 Press pq to select the picture to
which you want to add the frame,
and press Z.
•
Press sr to rotate the picture
90° clockwise or counterclockwise.
OK
GO
SELECT
FRAME
3 Adjust the position and size of the
picture, and press Z.
srpq
Adjusts the position of
the picture.
Zoom lever Adjusts the size of the
picture.
When you select a frame that can
accommodate more than one
picture, repeat Steps 2 and 3 to
add pictures.
OK
GO
MOVE
95
Creating composite pictures (FRAME/TITLE/CALENDAR/LAYOUT)
(When [TITLE] is selected
1 Press pq to select a picture, and
TITLE
press Z.
2 Press pq to select a title, and press
Z.
•
Press sr to rotate the picture
90° clockwise or counterclockwise.
OK
OK
OK
SELECT
TITLE
GO
GO
GO
3 Adjust the position and size of the
title, and press Z.
srpq
Adjusts the position of
the title.
Zoom lever Adjusts the size of the
title.
MOVE
TITLE
4 Press srpq to select the color of
the title, and press Z.
6
SELECT
(When [CALENDAR] is selected
1 Press pq to select a picture, and
press Z.
CALENDAR
2 Press pq to select a calendar, and
press Z.
•
Press sr to rotate the picture
90° clockwise or counterclockwise.
OK
GO
SELECT
3 Set the date of the calendar, and
CALENDAR
press Z.
2005 . 09
sr Changes the settings for
year and month.
pq
Alternates between the year
and month settings.
OK
GO
SELECT
SET
96
Creating composite pictures (FRAME/TITLE/CALENDAR/LAYOUT)
(When [LAYOUT] is selected
1 Press pq to select a layout, and press Z.
2 Select the type of layout picture, and
LAYOUT
press Z.
ALL IMAGES All pictures in the
ALL IMAGES
ALBUM
internal memory or
the card are added to
the layout.
CALENDAR
SEL. IMAGE
gGo to Step 3.
All pictures in the
selected album are
added to the layout.
OK
GO
SELECT
ALBUM
CALENDAR Select the pictures you want to add to the layout by day
from the monthly display.
SEL. IMAGE Select the pictures to be added to the layout individually.
3 Select the pictures.
When [ALBUM] is selected
SEL. ALBUM
•
Press pq to select an album,
and press Z.
1
5
9
2
6
3
7
4
8
6
10
11
12
OK
GO
SELECT
When [CALENDAR] is selected
2005
Fri Sat
9Sun Mon Tue Wed Thu
28
29
30
31
1
2
9
3
•
Use the arrow pad to select the
day, and press Z.
4
5
6
7
8
10
17
24
1
11
18
25
2
12
19
26
3
13
20
27
4
14
21
28
5
15
22
29
6
16
23
30
7
8
When [SEL. IMAGE] is selected
SEL. IMAGE
•
Press pq to select a picture,
and press Z. Repeat this step
and select additional pictures
until the screen in Step 3 is
displayed.
•
Press sr to rotate the picture
90° clockwise or counterclockwise.
OK
GO
SELECT
97
Adjusting pictures (BRIGHTNESS/SATURATION)
3
Select [OK], and press Z.
FRAME
•
The [BUSY] bar is displayed and after
the image is saved, the camera returns
to the playback mode.
OK
RESET
CANCEL
OK
GO
SELECT
When [FRAME] is selected
Note
• Creating a composite picture with [FRAME], [TITLE], [CALENDAR] or
[LAYOUT] is not possible in the following cases:
If there is insufficient space in the internal memory or the card, or for
movies, pictures edited with a computer, pictures taken with another
camera, or pictures in raw data format.
TIPS
• You can change frames and titles using OLYMPUS Master software. For
details, refer to the “Help” guide and the OLYMPUS Master reference manual.
6
Adjusting pictures (BRIGHTNESS/
SATURATION)
This function lets you adjust still pictures and save them as new pictures.
The following adjustment operations are possible.
BRIGHTNESS
SATURATION
Adjusting the brightness of a picture and saves the picture as a
new file.
Adjusting the color strength of a picture and saves the picture as
a new file.
Select the picture that you want to adjust and display the top menu.
Top menu [EDIT] [BRIGHTNESS] / [SATURATION]
98
Editing movies
1
Select [NEW FILE], and press Z.
SATURATION
NEW FILE
CANCEL
OK
GO
CANCEL
SELECT
When [SATURATION] is
selected
2
3
Press sr to adjust the
brightness or saturation, and
press Z.
SATURATION
Select [OK], and press Z.
•
The [BUSY] bar is displayed and after
the image is saved, the camera returns
to the playback mode.
OK
GO
SELECT
When [SATURATION] is
selected
6
Note
• Adjusting pictures with [BRIGHTNESS] or [SATURATION] is not possible in the
following cases:
If there is insufficient space in the internal memory or the card, or for
movies, pictures edited with a computer, pictures taken with another
camera, or pictures in raw data format.
Editing movies
This function lets you create indexes and edit movies.
INDEX 9 frames extracted from a movie are displayed as an index and stored as
a still picture.
EDIT
This function lets you extract parts of the movie that you want.
Select a movie that you want to edit and display the top menu.
99
Editing movies
Creating an index
Top menu [MODE MENU] [EDIT] [INDEX]
1
2
Select [NEW FILE], and press Z.
INDEX
NEW FILE
CANCEL
OK
GO
SELECT
Select the first frame of the
index, and press Z.
00:00/00:36
s : Jumps to the first frame of the movie.
r : Jumps to the last frame of the movie.
q
p
: Displays the next frame. The movie
can be played continuously by
holding the button down.
6
OK
GO
: Displays the previous frame. The
The movie can be played continuously in reverse by holding the button
down.
3
4
As in Step 2, select the last frame
of the index, and press Z.
OK
GO
00:00/00:36
Select [OK], and press Z.
INDEX
•
The [BUSY] bar is displayed. The 9
frames extracted from the movie are
displayed in index format, and the
camera returns to playback mode. The
index is stored as a new picture.
OK
RESET
CANCEL
OK
GO
SELECT
100
Editing movies
Note
• The index is stored as a still picture in a different record mode from the original
movie.
• The interval between the frames that are automatically extracted varies
depending on the length of the movie.
• You cannot create an index if there is insufficient memory space in the internal
memory or the card.
Editing a movie
1
Select [NEW FILE] or
[OVERWRITE], and press Z.
EDIT
NEW FILE
Stores the edited movie as
a new movie.
NEW FILE
OVERWRITE
CANCEL
OVERWRITE Stores the edited movie
with the same name as the
original. The original movie
is not stored.
6
OK
GO
SELECT
2
Select the first frame of the part
you want to keep, and press Z.
s : Jumps to the first frame of the movie.
r : Jumps to the last frame of the movie.
00:00/00:36
q
: Displays the next frame. The movie
can be played continuously by
holding the button down.
OK
GO
p
: Displays the previous frame. The
movie can be played continuously in
reverse by holding the button down.
101
Playing back pictures on a TV
3
4
As in Step 2, select the last frame
of the part you want to keep and
press Z.
OK
GO
00:00/00:36
Select [OK], and press Z.
EDIT
•
The [BUSY] bar is displayed and after
the edited movie is stored as a new
movie or the original movie is
overwritten, the camera returns to the
playback mode.
OK
RESET
CANCEL
OK
GO
SELECT
Note
• You cannot select [NEW FILE] if there is insufficient memory space in the
internal memory or the card.
• The editing process of long movies is more time-consuming.
6
Playing back pictures on a TV
Use the provided AV cable to play back recorded images on your TV. You
can play back both still pictures and movies on your TV.
1
Make sure that the TV and camera are turned off. Connect
the multi-connector on the camera to the video input
terminal on the TV using the provided AV cable.
Connector cover
Multi-connector
Connect to the TV’s
video input (yellow) and
audio input (white)
terminals.
AV cable (provided)
102
Playing back pictures on a TV
2
3
Turn the TV on, and set it to video input mode.
•
For details of switching to video input, refer to your TV’s instruction manual.
Press the POWER button to turn the camera on.
•
The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
•
The camera’s monitor stays off.
TIPS
• The close-up playback, index display and slideshow functions can also be used
on a TV screen.
• You are recommended to use the optional AC adapter when playing back
pictures on a TV.
Note
• Make sure that the camera’s video output signal is the same as the TV’s video
• Be sure to use the provided AV cable to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
6
Video output
You can select [NTSC] or [PAL] according to your TV’s video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
Top menu [MODE MENU] [SETUP] [VIDEO OUT] [NTSC] / [PAL]
•
For album playback mode: Top menu [ALBUM MENU] [VIDEO OUT]
[NTSC] / [PAL]
TIPS
TV video signal types by country/region
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea, Japan
PAL
European countries, China
103
Protecting pictures
You are recommended to protect important pictures to avoid accidentally
erasing them.
Protected pictures cannot be erased by the single-frame/all-frame erase
function, but they are all erased by formatting.
Select the picture you want to protect and display the top menu.
Top menu [MODE MENU] [PLAY] [0] [ON] / [OFF]
•
•
For album playback mode: Top menu [ALBUM MENU] [0] [ON] / [OFF]
To cancel protection, select the protected
picture and select [OFF].
100 0004
SQ1
:
’05. 09. 26 12 30
4
Displayed when a picture is
protected.
6
Copying pictures in the internal memory
to the card (BACKUP)
Pictures recorded to the internal memory can be copied to a card (backup).
A backup does not erase the pictures in the internal memory.
You need an optional card to use the backup function. Insert a card
into the camera before using this function.
Top menu [MODE MENU] [CARD] [BACKUP]
104
Erasing pictures
1
Select [YES], and press Z.
BACKUP
•
All image data in the internal memory is
copied to the card.
YES
NO
OK
GO
SELECT
Note
• If there is not enough space left on the card, [CARD FULL] is displayed and
backup is canceled.
• If the battery power runs out while the camera is backing up the data, the image
data may be lost or damaged. It is recommended that you use the AC adapter.
• Never open the card cover or remove the batteries while the camera is backing
up data. Also, do not connect or disconnect the AC adapter. The internal
memory or the card may not operate properly.
Erasing pictures
6
This function erases recorded pictures. Pictures can be erased either one
at a time or all the pictures in the internal memory or on the card.
Note
• You cannot erase protected pictures. Cancel protection before erasing such
pictures.
• Once erased, pictures cannot be restored. Check each picture before erasing
• When a picture in an album is erased, it is also erased from the album.
105
Erasing pictures
Single-frame erase
1
2
Select the picture you want to
erase, and press the Sbutton.
ERASE
YES
NO
Select [YES], and press Z.
•
The displayed picture is erased.
OK
SELECT
GO
All-frame erase
Top menu [MODE MENU] [MEMORY (CARD)] [ALL ERASE]
6
1
Select [YES], and press Z.
ALL ERASE
•
All the pictures are erased.
CAUTION ERASING ALL
YES
NO
OK
GO
SELECT
106
Formatting the internal memory or card
(MEMORY FORMAT/FORMAT)
This function lets you format the internal memory or the memory card.
Formatting prepares the card or internal memory to receive data.
•
Make sure there is no card inserted in the camera when formatting the internal
memory.
•
•
Be sure that the card is inserted in the camera when formatting the card.
Before using non-OLYMPUS cards or cards which have been formatted on a
computer, you must format them with this camera.
All existing data, including protected pictures, are erased when the
internal memory or the card is formatted. Make sure that you save or
transfer important data to a computer before formatting the internal
memory or the card.
Top menu [MODE MENU] [MEMORY (CARD)]
[MEMORY FORMAT (FORMAT)]
1
Select [YES], and press Z.
MEMORY FORMAT
6
•
The [BUSY] bar is displayed while the
internal memory or the card is
formatted.
CAUTION ERASING ALL
YES
NO
OK
GO
SELECT
Note
• Do not do any of the following during formatting as such actions may damage
the card.
Opening the battery compartment cover, opening the card cover,
connecting or disconnecting the AC adapter (regardless of whether there
are batteries in the camera or not)
107
Settings
ꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ
7
One of the key features of a digital camera is
that you can view the pictures you have taken
immediately.
But that isn’t all.
For example, you can customize the startup
screen with your own picture or select the
beep or shutter sounds.
Making use of these functions will make such
a difference to how much fun you get out of
your camera. Why not try them out?
START
Which language?
Power on setup
Use shutter sound?
Use the beep sound?
What monitor brightness?
Setting shortcuts
Playback volume?
Set a screen?
GOAL
Now you have your very own customized camera!
108
Resetting the settings to the default (RESET)
The camera retains the changed settings for shooting functions even if the
power is turned off. Use [RESET] to reset the settings (other than My Mode
settings and [SETUP] tab in mode menu) to the factory default settings. For
a list of the default settings, see “List of factory default settings” (P. 186).
Top menu [MODE MENU] [SETUP] [RESET]
1
Select [YES], and press Z.
RESET
•
Settings are reset to the factory default.
RESET TO DEFAULT
YES
NO
OK
SELECT
GO
Selecting a display language
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
7
Top menu [MODE MENU] [SETUP] [W]
1
Select a language, and press Z.
ENGLISH
FRANCAIS
ESPAÑOL
PORTUGUES
OK
GO
SELECT
TIPS
To increase the number of languages
j You can add other languages to your camera with the provided OLYMPUS
Master software. For details, refer to the help in the OLYMPUS Master
software.
109
Changing the startup screen and shutdown
screen (PW ON SETUP/PW OFF SETUP)
You can select the picture displayed and the sound played when the
camera is turned on and turned off. You can also register your favorite
Top menu [MODE MENU] [SETUP] [PW ON SETUP] /
[PW OFF SETUP]
1
For [SCREEN], select [OFF], [1],
or [2], and press Z.
PW ON SETUP
SCREEN
SOUND
OFF
1
OFF
No picture is displayed.
1
2
A picture is displayed.
2
The picture registered with
[SCREEN SETUP] is displayed.
If there is no registered picture,
nothing is displayed.
OK
SELECT
GO
2
For [SOUND], select [OFF], [1], or
[2], and press Z.
PW ON SETUP
SCREEN
SOUND
OFF
1/2
No sound.
Sound is output.
OFF
1
•
The volume level is the same as that set
with [VOLUME].
2
7
OK
SELECT
GO
3
Press Z.
Note
• If [SCREEN] is set to [OFF], [SOUND] cannot be set.
Screen setup
You can select the pictures that are displayed when the power is turned on and
turned off. Still pictures in the internal memory or the card can be registered. Use
[PW ON SETUP] or [PW OFF SETUP] to display the screen you registered.
110
Viewing pictures immediately (REC VIEW)
Top menu [MODE MENU] [SETUP] [SCREEN SETUP]
[PW ON SETUP] / [PW OFF SETUP]
•
If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered
picture and register a new one. To register a
new picture, select [RESET], and press Z. If
you select [KEEP], the screen returns to the
menu.
SCREEN SETUP
IMAGE EXISTING
RESET
KEEP
OK
GO
CANCEL
SELECT
1
2
Select the picture you want to register, and press Z.
Select [OK], and press Z.
SCREEN SETUP
•
The picture is registered and the screen
returns to the menu.
SET AS PW ON SCREEN
OK
CANCEL
OK
GO
CANCEL
SELECT
Registering a picture for the
startup screen
7
Viewing pictures immediately (REC VIEW)
You can choose whether or not to display the picture you have just taken
on the monitor.
ON
The picture being recorded is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway
during Rec View lets you resume shooting immediately.
OFF The picture being recorded is not displayed. This is useful when you want to
prepare for your next shot while the previous picture is being recorded.
Top menu [MODE MENU] [SETUP] [REC VIEW] [ON] / [OFF]
111
SVSOetLteiUntgMtcEian)mgeracsaoumndse(rBaeepssoouundn/BdEsEP(/S8HUT/TBEER SEOPUN/D/
SHUTTER SOUND/VOLUME)
8
BEEP
Select [OFF], [LOW] or [HIGH] for the camera warning sound.
Select [OFF], [1] or [2] for the sound of the button operations,
for example when making menu selections. You can also set
the volume of the sound to [LOW] or [HIGH].
SHUTTER SOUND Select [OFF], [1] or [2] for the sound of the shutter button. You
can also set the volume of the sound to [LOW] or [HIGH].
VOLUME
Set the volume for playback of still pictures and movies with
sound. There are 5 levels to choose from.
(8
Top menu [MODE MENU] [SETUP] [8] [OFF] / [LOW] / [HIGH]
(BEEP
Top menu [MODE MENU] [SETUP] [BEEP]
7
1
Select [OFF], [1] or [2]. If you
selected [1] or [2], select [LOW]
or [HIGH], and press Z.
BEEP
OFF
1
LOW
HIGH
2
OK
SELECT
GO
(SHUTTER SOUND
Top menu [MODE MENU] [SETUP] [SHUTTER SOUND]
112
Resetting file names (FILE NAME)
1
Select [OFF], [1] or [2].
If you selected [1] or [2], select
[LOW] or [HIGH] and press Z.
SHUTTER SOUND
OFF
1
2
LOW
HIGH
OK
SELECT
GO
(VOLUME
Top menu [MODE MENU] [SETUP] [VOLUME]
•
For album playback mode: Top menu [ALBUM MENU] [VOLUME]
1
Press sr to set the volume, and press Z.
Resetting file names (FILE NAME)
File names and their folder names for recorded pictures are automatically
generated by the camera. File names and folder names respectively
include file numbers (0001 to 9999) and folder names (100 to 999), and
are named as follows.
7
Folder name
File name
\ D C I M \ * * * O L Y M P \ P m d d * * * * . j p g
Folder No.
(100 – 999)
Month
(1 – C) (0001 – 9999)
File No.
Day (01 – 31)
Month: Jan. – Sep. = 1 – 9, Oct. = A, Nov. = B, Dec. = C
113
Adjusting the image processing function (PIXEL MAPPING)
There are two settings from which you can choose: [RESET] or [AUTO]. Choose the
one that is best for you when transferring images to a computer.
RESET
The file number and folder number are reset every time a new card is
inserted in the camera. The folder number returns to No. 100 and the file
number returns to No. 0001. This method is useful when grouping files
on separate cards.
AUTO
Even if a new card is inserted, the folder number and file number are
retained from the previous card, so the same file number is not used on
different cards. This helps you to manage multiple cards. This method is
useful when you want to manage all your files with sequential numbers.
Top menu [MODE MENU] [SETUP] [FILE NAME] [RESET] / [AUTO]
Note
• When the File No. reaches 9999, the file number returns to 0001 and the folder
number changes.
• When both the folder number and file number reach their respective maximum
number (999/9999), the number of storable pictures becomes 0 even if the card
is not full. Replace the card with a new one.
7
Adjusting the image processing function
(PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one
minute after taking or viewing pictures to allow the pixel mapping function
to perform properly.
Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]
114
Adjusting the monitor brightness
1
Press q. When [START] is
displayed, press Z.
PIXEL MAPPING
START
•
The [BUSY] bar is displayed during pixel
mapping. When pixel mapping is
finished, the screen returns to the mode
menu.
DUAL TIME
SETUP
m/ft
Note
• If you turn the camera off during pixel mapping, check must be performed
again.
Adjusting the monitor brightness
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU] [SETUP] [s]
7
•
For album playback mode: Top menu [ALBUM MENU] [s]
1
Adjust the brightness while
looking in the monitor, and when
you have set the desired level,
press Z.
•
Pressing s brightens the monitor, and
pressing r darkens it.
OK
GO
SELECT
115
Setting the date and time
This function lets you set the date and time. The date and time is saved
with each image, and is used in the file name.
Top menu [MODE MENU] [SETUP] [X]
1
Select one of the following date
formats: [Y-M-D] (Year/Month/
Day), [M-D-Y] (Month/Day/Year),
[D-M-Y] (Day/Month/Year), and
press q.
2005
Y
.
01 . 01
M
D
:
00 00
•
The camera proceeds to the year
setting.
OK
GO
SELECT
SET
•
The following steps show the procedure
used when the date and time settings
are set to [Y-M-D].
2
Press sr to set the year, and
press q to move to the month
setting.
2005
.
01
.
01
•
To move back to the previous setting,
press p.
The first two digits of the year are fixed.
:
00 00
•
7
OK
GO
SELECT
SET
3
4
Repeat this procedure until the
date and time are completely set.
•
The time is displayed in the 24-hour
format. Consequently, 2 p.m. is displayed as 14:00.
Press Z.
•
For a more accurate setting, press Zwhen the time signal hits 00 seconds.
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without batteries for approximately 3 days. The settings will be
canceled more quickly if the batteries were only loaded in the camera for a
short time before being removed. Before taking important pictures, check that
the date and time settings are correct.
116
Setting the date and time in another time
zone (DUAL TIME SETUP)
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [X]. After setting, you can switch
between the new setting and the time set in [X].
Top menu [MODE MENU] [SETUP] [DUAL TIME SETUP]
(Setting dual time
1
Select [ON], and press q.
PIXEL MAPPING
DUAL TIME
SETUP
OFF
ON
m/ft
2
Press sr to set the year, and
press q to move to the month
setting.
DUAL TIME SETUP
2005
.
01
.
01
•
To move back to the previous setting,
press p.
:
00 00
7
•
•
The first two digits of the year are fixed.
The date format is the same as that set
in Step 1 of [X].
OK
GO
SELECT
SET
3
4
Repeat this procedure until the
date and time are completely set.
•
The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
Press Z.
•
•
For a more accurate setting, press Zwhen the time signal hits 00 seconds.
The date and time switches to dual time.
(Switching the date and time
1
Select [OFF] or [ON], and press Z.
OFF Switches to the date and time set in [X].
ON Switches to the date and time set in [DUAL TIME SETUP].
117
Setting the measurement unit (m/ft)
TIPS
• Changes made to [X] do not affect the date and time set in [DUAL TIME
SETUP].
• After setting the date and time with [DUAL TIME SETUP], it is retained even
after [DUAL TIME SETUP] is set to [OFF].
Setting the measurement unit (m/ft)
The measurement unit can be selected from either meters or feet in the
manual focus mode.
m
ft
At long ranges, the camera measures in meters, and at short ranges in
centimeters.
At long ranges, the camera measures in feet, and at short ranges in inches.
Top menu [MODE MENU] [SETUP] [m] / [ft]
7
Customizing the camera (MY MODE SETUP/
SHORT CUT/CUSTOM BUTTON)
You can customize the camera to make it easier to use based on your
needs.
MY MODE SETUP
You can set shooting-related functions. You can also save the current camera
settings. When the mode dial is set to r, your customized settings are activated.
You can save up to 4 different patterns in [sMY MODE 1] to [dMY MODE 4].
Only the settings in [sMY MODE 1] are preset.
SHORTCUT
You can set shortcut menus on the top menu in the still picture shooting mode (P/
A/S/M/r/f). This is useful when you want to go quickly to frequently used
functions.
118
Customizing the camera (MY MODE SETUP/SHORT CUT/CUSTOM BUTTON)
CUSTOM BUTTON
You can set commonly used functions to the custom button ([ button). When a
function is set to the custom button, you can simply press the custom button to select
that function without having to go through the menu.
(Functions that can be assigned to My Mode, shortcut
menus, and custom button
MY MODE
SETUP
CUSTOM
BUTTON
Ref.
Page
Function
P/A/S/M/f
SHORT CUT
9
9
9
9
9
9
9
—
—
9
9
9
9
—
9
9
9
9
9
9
9
9
9
9
9
9
—
—
—
—
—
—
—
—
—
9
—
—
—
—
—
—
—
9
—
FNo.
SHUTTER
F
1
MONITOR*
2
ZOOM*
FLASH MODE
AE LOCK (factory default settings)
AF LOCK
P. 45
P. 71
9
ESP/n
9
&
9
9
7
DRIVE
9
9
ISO
9
9
r1/2/3/4
Y
9
9
9
9
w
9
—
9
#SYNCRO
QFLASH
DIGITAL ZOOM
NOISE REDUCTION
AF MODE
FOCUS MODE
FULLTIME AF
PANORAMA
R
9
9
9
9
9
9
9
9
9
9
9
9
9
—
9
—
9
TIMELAPSE
9
—
119
Customizing the camera (MY MODE SETUP/SHORT CUT/CUSTOM BUTTON)
MY MODE
SETUP
CUSTOM
BUTTON
Ref.
Page
Function
SHORT CUT
K
9
9
9
9
9
9
9
9
9
9
9
9
9
P. 66
P. 67
P. 67
P. 67
WB
>
9
—
—
—
—
—
—
—
SHARPNESS
CONTRAST
SATURATION
INFO
9
9
9
—
—
—
u
FRAME ASSIST
*1 Set to light the monitor when the camera is turned on.
*2 For [ZOOM], select from 38 mm, 50 mm, 80 mm, 100 mm, 114 mm (these
numbers are based on the focal length of a 35mm camera).
(Setting My Mode
Top menu [MODE MENU] [SETUP] [MY MODE SETUP]
7
1
2
Select the type of [MY MODE
SETUP], and press q.
CURRENT Saves the current camera
BEEP
settings.
SHUTTER SOUND
MY MODE SETUP
FILE NAME
CURRENT
RESET
RESET
Restores the factory default
settings.
CUSTOM Saves settings one by one.
CUSTOM
Select a My Mode number, and
press Z.
1/2/3/4
MY MODE 1
MY MODE 2
MY MODE 3
MY MODE 4
OK
GO
CANCEL
SELECT
120
Customizing the camera (MY MODE SETUP/SHORT CUT/CUSTOM BUTTON)
3
Make the settings.
If you selected [CURRENT] in
Step 1
MY MODE SETUP
SET CURRENT SETTING
Select [SET], and press Z.
SET
•
The current camera settings are saved
CANCEL
in the selected My Mode.
OK
SELECT
GO
If you selected [RESET] in Step 1
MY MODE SETUP
Select [RESET], and press Z.
RESET CURRENT SETTING
RESET
•
The settings in the selected My Mode
are reset.
If no settings are saved, My Mode
settings cannot be selected.
CANCEL
OK
GO
SELECT
If you selected [CUSTOM] in Step 1
MY MODE SETUP
P/A/S/M/SCENE
Select the item to set to My Mode, and
press q. Change the setting, and press Z.
FNo.
F 2.8
•
•
The setting is saved.
SHUTTER
You can also change the other settings.
7
MONITOR
4
When you have made all the settings you want, press Z.
Note
• Although the settings you are using can be saved in the [CURRENT] setting,
the zoom position will be saved as the closest of the 5 settings in [ZOOM] in
[MY MODE SETUP].
121
Customizing the camera (MY MODE SETUP/SHORT CUT/CUSTOM BUTTON)
(Setting shortcuts
Top menu [MODE MENU] [SETUP] [SHORT CUT]
1
Select [A], [B] or [C], and press
q.
SHORT CUT
A
•
For fmode, [C] is set to [SCENE]
and shortcut menus cannot be set.
B
C
OK
GO
SELECT
2
3
Select a function, and press Z.
SHORT CUT
•
The screen in Step 1 is displayed.
ESP
/
DRIVE
ISO
OK
GO
SELECT
Press Z.
7
(Setting the custom button
Top menu [MODE MENU] [SETUP] [CUSTOM BUTTON]
1
Select a function, and press Z.
CUSTOM BUTTON
AE LOCK
AF LOCK
ESP
/
OK
GO
SELECT
122
8 Printing pictures
Printing pictures
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
8
To print the pictures you have taken, you can
either have a photo store process them, or
print them at home on your own printer.
If you go to a photo store, it is a good idea to
store the print reservation data on the card
first. This lets you select the pictures you want
to print and decide how many prints you want.
If you print the pictures at home, you can
either connect the camera directly to the
printer or you can connect the camera to a
computer and download the pictures to the
computer first.
Printing at the store
Select the pictures
you want to print
at the store
Use the camera to
select the pictures
you want to print
Print
reservation
DirectPrint
Printing at home
123
Direct printing (PictBridge)
Using the direct printing function
By connecting the camera to a PictBridge-compatible printer with the USB cable, you
can print out recorded pictures directly. With the camera connected to the printer,
select the pictures you want to print and the number of prints on the camera’s
monitor.
With [EASY PRINT], you can print out the picture displayed on the monitor at the
With [CUSTOM PRINT], you can print out pictures with the set number of prints, print
It is also possible to print out pictures using the print reservation data.
To find out if your printer is compatible with PictBridge, refer to the printer’s
instruction manual.
What is PictBridge?... It is the standard for connecting digital cameras and printers
of different manufacturers and printing out pictures directly.
STANDARD... All printers that support PictBridge have standard print settings. If
printed according to these settings. Refer to the printer’s instruction manual for its
standard settings or contact the printer manufacturer.
TIPS
• For details of printing paper types, ink cassettes, etc., refer to the printer’s
instruction manual.
Note
• You are recommended to use the optional AC adapter when printing pictures.
If you use batteries, make sure that they are sufficiently charged. If the camera
stops operating while communicating with the printer, the printer may
malfunction or image data may be lost.
8
• Images recorded in movie mode and raw data cannot be printed.
• The camera will not enter sleep mode when connected to a printer with the USB
cable.
Print modes and settings
Available printing modes, paper sizes etc., vary depending on the printer you
use. Refer to the instruction manual for your printer.
124
Direct printing (PictBridge)
Printing pictures (EASY PRINT)
[EASY PRINT] can be used to print out the picture displayed on the monitor.
1
2
Display the picture you want to print out on the monitor.
Connect one end of the provided
USB cable into the camera’s
multi-connector and the other end
into the printer’s USB connector.
•
The [EASY PRINT START] screen is
displayed.
•
For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
Multi-connector
3
Press the <button.
•
Printing starts.
EASY PRINT START
PC / CUSTOM PRINT
OK
8
•
•
When printing is finished, the picture
selection screen is displayed. To print
another picture, press pq to select a
picture, and press the <button.
When you are finished, disconnect the
USB cable from the camera with the
picture selection screen displayed.
EXIT
PRINT
125
Direct printing (PictBridge)
4
5
Remove the USB cable from the
camera.
•
The camera turns off.
Remove the USB cable from the
printer.
TIPS
• You can use [EASY PRINT] even when the camera is turned off or in shooting
mode. With the camera turned off or in shooting mode, connect the USB cable.
The selection screen for the USB connection is displayed. Select [EASY
Printing pictures (CUSTOM PRINT)
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
Try printing one picture with the most basic printing method of [CUSTOM PRINT].
The selected picture is printed using the standard settings of your printer. The date
and file name are not printed.
8
1
Connect one end of the provided
USB cable into the camera’s
multi-connector and the other end
into the printer’s USB connector.
•
•
The camera turns on automatically.
The monitor turns on and the selection
screen for the USB connection is
displayed.
•
For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
Multi-connector
126
Direct printing (PictBridge)
2
Select [CUSTOM PRINT], and
press Z.
USB
P C
EASY PRINT
CUSTOM PRINT
EXIT
•
[ONE MOMENT] is displayed and the
camera and printer are connected. The
[PRINT MODE SELECT] screen is
displayed on the monitor. Select the
print settings on the camera’s monitor.
Select [EASY PRINT], and press Z.
The picture selection screen is displayed.
OK
GO
SELECT
•
(To select the pictures to print
When there is a card in the camera, a screen is
displayed for selecting the pictures you want to
print.
Select [ALL IMAGES] or [ALBUM], and press Z.
To select an album, select [ALBUM], and press
Z.
ALL IMAGES
ALBUM
OK
GO
SELECT
3
Select [PRINT], and press Z.
PRINT MODE SELECT
•
The [PRINTPAPER] screen is
displayed.
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
•
When the [PRINTPAPER] screen is not
displayed, go to Step 5.
OK
GO
EXIT
SELECT
4
Press Zwithout changing the
[SIZE] or [BORDERLESS]
settings.
8
PRINTPAPER
SIZE
STANDARD
BORDERLESS
STANDARD
OK
GO
CANCEL
SELECT
127
Direct printing (PictBridge)
5
6
Press pq to select a picture, and
press s.
•
[SINGLE PRINT] is set.
100 0004
OK
PRINT
MORE
SELECT
SINGLEPRINT
Press Z.
•
The [PRINT] screen is displayed.
100 0004
OK
PRINT
MORE
SELECT
CANCEL
7
Select [PRINT], and press Z.
PRINT
•
•
Printing starts.
When printing is finished, the [PRINT
MODE SELECT] screen is displayed.
PRINT
CANCEL
OK
GO
CANCEL
SELECT
(To cancel printing
Pressing Zduring print data transfer displays
the screen for selecting whether to continue or
cancel printing. To cancel printing, select
[CANCEL] and press Z.
8
TRANSFERRING
CANCEL
OK
Screen during data transfer
PRINT
CONTINUE
CANCEL
OK
GO
SELECT
128
Direct printing (PictBridge)
8
9
In the [PRINT MODE SELECT]
screen, press p.
PRINT MODE SELECT
PRINT
•
A message is displayed.
ALL PRINT
MULTI PRINT
ALL INDEX
OK
GO
EXIT
SELECT
Remove the USB cable from the
camera.
•
The camera turns off.
10Remove the USB cable from the
printer.
8
129
Direct printing (PictBridge)
Other print modes and print settings
In addition to the basic printing method, there are also several other printing modes.
The paper size and border settings can be set in the same print mode.
If the following screen is displayed, perform the operations according to the
operation guide.
Selecting the picture to print (available only when a card is
inserted)
ALL IMAGES
Allows you to select from all
pictures in the internal memory
or the card to print.
ALBUM
Select an album and the
pictures in the album to print.
ALL IMAGES
ALBUM
Operation guide
OK
GO
SELECT
Selecting a print mode
PRINT
ALL PRINT
Prints the selected picture.
PRINT MODE SELECT
Prints all the pictures stored in
the internal memory or the
card.
Prints one picture in multiple
layout format.
Prints an index of all the
pictures stored in the internal
memory or the card.
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
MULTI PRINT
ALL INDEX
OK
GO
EXIT
SELECT
8
PRINT ORDER Prints pictures according to print reservations. If no print
reservations have been made, this option is not available.
130
Direct printing (PictBridge)
Setting the print paper
Select the paper size and border on the [PRINTPAPER] screen.
SIZE
Choose from the available
paper sizes on your printer.
PRINTPAPER
SIZE
STANDARD
BORDERLESS
STANDARD
BORDERLESS Select framed or unframed. In
[MULTI PRINT] mode, you
cannot select the frame.
OFF (
ON (
)
The picture is printed inside a
blank frame.
The picture is printed filling
the entire page.
)
OK
GO
CANCEL
SELECT
PICS/SHEET
Available in [MULTI PRINT] mode only. The number of prints that
can be printed varies depending on the printer.
Note
• If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and
[PICS/SHEET] are set to [STANDARD].
Selecting the picture to print
Press pq to select the picture you want to print.
You can also use the zoom lever and select a
picture from the index display.
PRINT
Prints one copy of the
selected picture.
100 0004
SINGLE PRINT Makes a print reservation for
OK
PRINT
MORE
SELECT
SINGLEPRINT
the displayed picture.
MORE
Sets the number of prints and
data to be printed for the
displayed picture.
8
131
Direct printing (PictBridge)
Setting the number of prints and data to be printed [MORE]
<×
Sets the number of prints.
You can select up to 10
prints.
PRINT INFO
1
DATE (
)
If you select [WITH], pictures
are printed with the date.
If you select [WITH], pictures
are printed with the file name.
Crops part of a picture and
prints it.
DATE
FILE NAME
WITHOUT
WITHOUT
FILE NAME (
)
P
OK
GO
SELECT
SET
Setting the trimming position and size [P]
1 Use the zoom lever to adjust the trimming
size and the arrow pad to adjust the trimming
position, and press Z.
2 Select [OK], and press Z.
OK
GO
Note
• The size of the picture that is printed depends on your printer’s setting. If the
cropped area of the picture is small, the magnification of the image increases
at the time of printing, creating a grainy picture.
• You are recommended to take a picture in SHQ or HQ record mode if you want
to create a detailed enlarged print of the picture.
8
132
Direct printing (PictBridge)
If an error message is displayed
If an error message is displayed on the camera’s monitor during direct print setting
or printing, see the following table.
For more details, refer to the printer’s instruction manual.
Monitor indication
Possible cause
Corrective action
The camera is not
connected to the printer
correctly.
Disconnect the camera and
connect it again correctly.
NO CONNECTION
There is no paper in the
printer.
Load some paper in the
printer.
NO PAPER
The printer has run out of Replace the ink cartridge in
ink.
the printer.
NO INK
The paper is jammed.
Remove the jammed paper.
JAMMED
The printer’s paper tray has Do not operate the printer
been removed or the printer while changing settings on
SETTINGS CHANGED
has been operated while
changing settings on the
camera.
the camera.
There is a problem with the Turn off the camera and
printer and/or camera.
printer. Check the printer and
remedy any problems before
turning the power on again.
PRINT ERROR
Pictures taken with other
cameras may not be printed
on this camera.
Use a computer to print.
r
CANNOT PRINT
8
TIPS
133
Print settings (DPOF)
How to make print reservations
Print reservation allows you to save printing data (the number of prints and the date
and time information) with the pictures stored on the card.
Only the images stored on the card can be reserved to print. Insert a card with
recorded pictures into the camera before making print reservations.
With print reservation, you can print out pictures easily either at home using a
personal DPOF-compatible printer or at a photo store that supports DPOF. DPOF is
a standard format used to record automatic print information from digital cameras. It
allows you to store data such as which pictures you want to print and the number of
prints so that you can print pictures automatically at home or at a photo store.
Pictures with print reservations can be printed using the following procedures.
Printing using a DPOF-compatible photo store.
You can print the pictures using the print reservation data.
Printing using a DPOF-compatible printer.
Printing is possible directly from a card containing print reservation data,
without using a computer. For more details, refer to the printer’s instruction
manual. A PC card adapter may also be necessary.
To use print services without using DPOF
Pictures stored in the internal memory cannot be printed at a photo store.
The pictures need to be copied to a card before taking them.
8
134
Print settings (DPOF)
TIPS
Relation between printing and record mode when shooting
The resolution of a computer/printer is generally based on the number of dots
(pixels) per inch (dpi). The higher the dpi value, the better the printed results.
Keep in mind, however, that the number of pixels does not change. This means
that when you print an image with a higher dpi value, the size of the printed
picture will be smaller. Although you can print magnified images, picture quality
will decrease.
If you want to print large, high-quality pictures, set the record mode as high as
Note
• DPOF reservations set by another device cannot be changed by this camera.
Make changes using the original device.
• If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations.
• If there is not enough space in the card memory, you may not be able to enter
the reservation data. [CARD FULL] will be displayed.
• You can make DPOF print reservations for up to 999 images per card.
• Even if an image is displayed with the message [PICTURE ERROR], it may be
possible to make print reservations. In this case, the print reservation icon (<)
is not displayed when the image is displayed for full view. <is displayed when
there are multiple images (index display), allowing you to confirm the print
reservation.
• Not all functions may be available on all printers, or at all photo stores.
• Print reservation may take a little time when saving printing data to the card.
• You cannot make print reservations for images saved in raw data format.
8
135
Print settings (DPOF)
Single-frame reservation
How to make a single-frame reservation for a selected picture is shown below.
Follow the operation guide to make settings.
For album playback mode, select the album that you want to make the print
reservations for, and display the top menu.
•
For album playback mode: Top menu [ALBUM MENU] [<]
1
Select [<], and press Z.
PRINT ORDER
Operation guide
OK
GO
CANCEL
SELECT
2
Follow the operation guide and
press pq to select the frames for
print reservations, and then
press sr to set the number of
prints.
0
100 0004
SQ1
:
’05. 09. 26 12 30
4
•
You cannot make print reservations for
pictures with A.
OK
GO
SELECT
•
Repeat Step 2 to make print
reservations for other pictures.
8
(Trimming the picture
1 Push or pull the zoom lever toward W or T.
•
The trimming frame is displayed.
2 Use the zoom lever to adjust the trimming size and the arrow pad to
adjust the trimming position, and press Z.
3 Select [OK], and press Z.
3
When you finish making print reservations, press Z.
136
Print settings (DPOF)
4
5
Select [NO], [DATE] or [TIME],
and press Z.
NO
NO
The pictures are printed without
the date and time.
DATE
TIME
DATE The selected pictures are printed
with the shooting date.
TIME The selected pictures are printed
with the shooting time.
OK
GO
CANCEL
SELECT
Select [SET], and press Z.
PRINT ORDER
(
)
1
1
SET
CANCEL
OK
GO
CANCEL
SELECT
All-frame reservation
Reserves all the pictures stored on the card. The number of prints is set at one print
per picture. You can set to print the shooting date and time.
For album playback mode, print reservations are made for all pictures in the album.
Select the album that you want to make the print reservations for, and display the top
menu.
8
•
For album playback mode: Top menu [ALBUM MENU] [<]
1
2
Select [U], and press Z.
Select [NO], [DATE] or [TIME], and press Z.
NO
DATE All pictures are printed with the shooting date.
TIME All pictures are printed with the shooting time.
The pictures are printed without the date and time.
3
Select [SET], and press Z.
137
Print settings (DPOF)
Resetting print reservation data
This function allows you to reset the print reservation data for pictures.
You can reset all the print reservation data or just for selected pictures.
•
For album playback mode: Top menu [ALBUM MENU] [<]
(To reset the print reservation data for all the pictures
1
2
Select [<] or [U], and press Z.
Select [RESET], and press Z.
PRINT ORDER SETTING
•
If there is no print reservation data, this
screen is not displayed.
PRINT ORDERED
RESET
KEEP
OK
GO
CANCEL
SELECT
(To reset the print reservation data for a selected picture
1
2
Select [<], and press Z.
Select [KEEP], and press Z.
PRINT ORDER SETTING
8
•
If there is no print reservation data, this
screen is not displayed.
PRINT ORDERED
RESET
3
Press pq to select the picture with
the print reservations you want to
cancel, and press r to decrease
the number of prints to 0.
KEEP
OK
GO
CANCEL
SELECT
•
Repeat Step 3 to cancel print reservations
for other pictures.
4
5
6
When you are finished canceling print reservations, press
Z.
Select [NO], [DATE] or [TIME], and press Z.
•
The setting is applied to the remaining pictures with print reservations.
Select [SET], and press Z.
138
9 Connecting the camera to a computer
Connecting the
camera to a computer
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
9
Viewing the pictures you have taken on your
computer is just one of the many ways you can
enjoy your pictures.
You can print out your favorite pictures, use
the application software to download your
pictures from your camera and edit them or
organize them by date or category, or attach
them to e-mail and send them over the
Internet.
There are all kinds of ways you can use your
pictures with a computer. You can run a
slideshow, post your pictures on your home
page, create an album, or set your favorite
picture as your desktop wallpaper.
Upload pictures
Print pictures
Share with friends
E-mail
Edit pictures
Home printing
Online
printing
Album making
Wallpaper
Panorama building
139
Flow
Using the USB cable provided with your camera, you can connect the
camera and computer and download (transfer) the images to your computer
using the OLYMPUS Master software, also provided with the camera.
Prepare the following items before starting.
OLYMPUS Master CD-ROM
USB Cable
Computer equipped with a USB port
Install the OLYMPUS Master software
Start up the OLYMPUS Master software
Download image files to the computer
Disconnect the camera from the computer
TIPS
Viewing and editing downloaded images
jIf you want to process images using graphics applications, make sure you
download the images to your computer first. Depending on the software, the
image files may be damaged if the images are processed (rotated, etc.)
while they are still in the internal memory or on the card.
If the data cannot be downloaded from the camera using the USB cable
jImage files on xD-Picture Card may be downloaded using the optional PC
card adapter. For details, visit the Olympus web site at the address shown
on the back cover of this manual.
9
Note
• It is recommended that you use the optional AC adapter when connecting the
camera to a computer. If you use batteries, make sure they have enough
power. The camera does not turn off automatically while it is connected to
(communicating with) a computer. If the battery power runs out, the camera will
stop whatever operation it is performing. This may result in a computer
malfunction, or loss of image data (file) being transmitted.
• Do not turn the camera off while it is connected to the computer. Doing so could
cause the computer to malfunction.
•
Connecting the camera to a computer via a USB hub may cause unstable operation
if there is any problem with compatibility between the computer and the hub. In this
case, do not use a hub, but connect the camera directly to the computer.
140
Using OLYMPUS Master
For editing and managing image files, install the OLYMPUS Master
software from the provided CD-ROM.
What is OLYMPUS Master?
OLYMPUS Master is application software for editing images taken with a digital
camera on a computer. Installing it on your computer lets you do the following:
Manage images
You can organize your images using the
calendar display. Search the image you
want by date or keyword.
Download images from the camera or
other media
Edit images
You can rotate images, trim them and
change the size.
View images and movies
You can run a slideshow and playback
movies.
Make panoramic images
You can make panoramic images using
pictures taken in panorama mode.
Edit images with the filter and
correction functions
9
Print images
You can print images and make indexes,
calendars and postcards.
View pictures taken in raw data format
For details of functions and operations other than the above, refer to the “Help” guide
and OLYMPUS Master reference manual.
141
Using OLYMPUS Master
Installing OLYMPUS Master
Before installing the OLYMPUS Master software, please confirm that your computer
is compatible with the following system requirements. For newer operating systems,
please refer to the Olympus web site as shown on the back cover of this manual.
(Operating environment
Windows
OS
CPU
Windows 98SE/Me/2000 Professional/XP
Pentium III 500MHz or later
RAM
128 MB or more (at least 256 MB is recommended)
300 MB or more
USB port
Hard disk capacity
Connector
Monitor
1,024 × 768 pixels, 65,536 colors or more
Note
• Data transfer is only guaranteed on computers with a factory installed OS.
• To install the software in Windows 2000 Professional/XP, you must log on as a
user with administrators’ privileges.
• Internet Explorer and QuickTime 6 or later should be installed on your
computer.
• Windows XP corresponds to Windows XP Professional/Home Edition.
• Windows 2000 corresponds to Windows 2000 Professional.
• If you are using Windows 98SE, the USB driver is installed automatically.
Macintosh
OS
Mac OS X 10.2 or later
CPU
RAM
Hard disk capacity
Connector
Monitor
Power PC G3 500 MHz or later
128 MB or more (at least 256 MB is recommended)
300 MB or more
USB port
1,024 × 768 pixels, 32,000 colors or more
9
142
Using OLYMPUS Master
Note
• Operation is only guaranteed on a Macintosh equipped with a built-in USB port.
• QuickTime 6 or later and Safari 1.0 or later must be installed.
• Be sure to remove the media (drag & drop onto the trash icon) before
performing the following operations. Failure to do so could result in unstable
computer operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s card cover
• Open the camera’s battery compartment cover
Windows
1
Insert the CD-ROM into the
CD-ROM drive.
•
The OLYMPUS Master setup screen is
displayed.
•
If the screen is not displayed,
double-click the “My Computer” icon
and click the CD-ROM icon.
2
Click the “OLYMPUS Master”.
•
The QuickTime installation screen is
displayed.
•
QuickTime is required to use
OLYMPUS Master. If the QuickTime
screen is not displayed, QuickTime 6 or
later is already installed on the
computer. In this case, go to Step 4.
9
143
Using OLYMPUS Master
3
4
Click “Next” and follow the on-
screen instructions.
•
When the QuickTime licensing
agreement is displayed, read the
agreement and click “Agree” to
proceed with the installation.
The OLYMPUS Master installation
screen is displayed.
•
Follow the on-screen
instructions.
•
When the OLYMPUS Master licensing
agreement is displayed, read the
agreement and click “Yes” to proceed
with the installation.
•
When the “User Information” dialog box
is displayed, enter your “Name” and
“OLYMPUS Master Serial Number”;
select your region and click “Next”.
Refer to the sticker on the CD-ROM
package for the serial number.
•
•
When the DirectX licensing agreement
is displayed, read the agreement and
click “Yes”.
A screen asking whether or not you want to install Adobe Reader is
displayed. Adobe Reader is required to read the OLYMPUS Master
instruction manual. If this screen is not displayed, Adobe Reader is already
installed on your computer.
5
To install Adobe Reader, click
“OK”.
•
To cancel installation, click “Cancel”.
Go to Step 7.
9
•
The Adobe Reader installation screen is displayed. Follow the on-screen
instructions.
144
Using OLYMPUS Master
6
7
Follow the on-screen
instructions.
•
The screen confirming that installation is
completed is displayed. Click “Finish”.
Select the option to restart immediately when the screen
asking you if you wish to restart the computer is displayed
and click “OK”.
•
•
The computer restarts.
Remove the CD-ROM from the CD-ROM drive and store it.
Macintosh
1
Insert the CD-ROM into the CD-ROM
drive.
•
•
The CD-ROM window is displayed.
If the CD-ROM window is not displayed, double-
click the CD-ROM icon on the desktop.
2
3
Double-click on the desired language
folder.
Double-click the “Installer” icon.
•
•
•
The OLYMPUS Master installer starts up.
Follow the on-screen instructions.
When the OLYMPUS Master licensing agreement is
displayed, read the agreement and click “Continue”
and then “Agree” to proceed with the installation.
The screen confirming that installation is completed
is displayed.
•
9
4
5
Click “Finish”.
•
The first screen is displayed.
Click “Restart”.
•
•
The computer restarts.
Remove the CD-ROM from the CD-ROM drive and store it.
145
Connecting the camera to a computer
Connect the camera to the computer using the USB cable provided with
the camera.
1
Make sure the camera is turned
off.
•
•
The monitor is off.
The lens is retracted.
Monitor
2
3
Plug the USB cable into the USB
port on the computer.
•
Refer to your computer’s instruction manual to locate the position of the
USB port.
Connector cover
Plug the USB cable into the
multi-connector of the camera.
•
•
The camera turns on automatically.
The monitor turns on and the selection
screen for the USB connection is
displayed.
Multi-connector
4
5
Select [PC], and press Z.
USB
The camera is recognized by the
computer.
P C
EASY PRINT
CUSTOM PRINT
EXIT
•
Windows
When you connect the camera to your
computer for the first time, the
computer attempts to recognize the
camera. Click “OK” to exit the message
OK
SELECT
GO
9
that is displayed. The camera is recognized as a “Removable Disk”.
Macintosh
•
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto
application starts automatically, so close this application and start
OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
146
Starting up OLYMPUS Master
Windows
1
Double-click the “OLYMPUS Master” icon
desktop.
on the
•
•
The main menu is displayed.
When OLYMPUS Master is started up for the first time after installation, the
“Registration” dialog box is displayed before the main menu. Follow the
prompts and fill in the registration form.
Macintosh
Double-click the “OLYMPUS Master” icon
1
in the
“OLYMPUS Master” folder.
•
•
The main menu is displayed.
When OLYMPUS Master is started up
for the first time, the “User Information”
dialog box is displayed before the main
menu. Enter your “Name” and
“OLYMPUS Master Serial Number”,
and select your region.
•
After the “User Information” dialog box,
the “Registration” dialog box is
displayed. Follow the prompts and fill
in the registration form.
9
147
Starting up OLYMPUS Master
(OLYMPUS Master main menu
7
6
1
2
5
3
4
1 “Transfer Images” button
Downloads images from the camera or other media.
2 “Browse Images” button
Displays the browse window.
3 “Online Print” button
The online print window is displayed.
4 “Print Images at Home” button
Displays the print menu.
5 “Create and Share” button
Displays the editing menu.
6 “Backup Images” button
Creates backup images.
7 “Upgrade” button
Displays window for optional upgrade to OLYMPUS Master Plus.
(To exit OLYMPUS Master
9
1
Click the “Exit”
on the main menu.
•
OLYMPUS Master is exited.
148
Displaying camera images on a computer
Downloading and saving images
You can save camera images on your computer.
1
2
Click “Transfer Images”
menu.
on the OLYMPUS Master main
•
The menu for selecting the source is displayed.
Click “From Camera”
.
•
The window for selecting images is
displayed. All the images in the camera
are displayed.
3
4
Select the image files and click
“Transfer Images”.
•
A window indicating that the download
is complete is displayed.
Click “Browse images now.”.
•
The downloaded images are displayed
in the browse window.
•
To return to the main menu, click
“Menu” in the “Browse” window.
Note
• The orange lamp blinks while downloading images. Do not do any of the
following while the lamp is blinking.
• Open the camera’s card cover.
9
• Open the camera’s battery compartment cover.
• Connect or disconnect the AC adapter.
149
Displaying camera images on a computer
(To disconnect the camera
You can disconnect the camera after downloading the images to your computer.
1
Make sure that the orange lamp
has stopped blinking.
Orange lamp
2
Make the following preparations
for disconnecting the USB
cable.
Windows 98SE
1 Double-click the “My Computer” icon and
right-click the “Removable Disk” icon to
display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon
in the system tray.
2 Click the message that is displayed.
3 When a message is displayed saying
that the hardware can be ejected
safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon
when the “Untitled” or “NO_NAME” icon
on the desktop is dragged. Drag and drop
it on the eject icon.
9
150
Viewing still pictures and movies
3
Disconnect the USB cable from
the camera.
Note
• Windows Me/2000/XP: When you click “Unplug or Eject Hardware”, a warning
message may be displayed. Make sure that image data is not being
downloaded from the camera and that all applications are closed. Click the
“Unplug or Eject Hardware” icon again and disconnect the cable.
Viewing still pictures and movies
1
Click “Browse Images”
menu.
on the OLYMPUS Master main
•
The “Browse” window is displayed.
2
Double-click the still picture
thumbnail that you want to view.
Thumbnail
•
•
View mode is enabled and the picture
is enlarged.
To return to the main menu, click
“Menu” in the “Browse” window.
9
151
Printing pictures
(To view a movie
1
2
Double-click the movie thumbnail that you want to see in the
“Browse” window.
•
View mode is enabled and the first frame of the movie is displayed.
To play back the movie, click playback button
bottom of the screen.
at the
The names and functions of the controller parts are shown below.
1
2
Description
3
4 5 6 7 8
Item
1 Playback slider
2 Time display
Move the slider to select a frame.
Displays the time that has elapsed during playback.
Playback (pause) Plays the movie. Functions as the pause button during
3
button
playback.
4 Back button
Displays the previous frame.
Displays the next frame.
5 Forward button
6 Stop button
Stops playback and returns to the first frame.
Plays the movie repeatedly.
Displays the volume adjustment slider.
7 Repeat button
8 Volume button
Printing pictures
Pictures can be printed from the photo, index, postcard and calendar
menus. The explanation below uses the photo menu.
9
1
Click “Print Images at Home”
main menu.
on the OLYMPUS Master
•
The print menu is displayed.
152
Printing pictures
2
3
Click “Photo”
.
•
The “Photo Print” window is displayed.
Click “Settings” in the “Photo
Print” window.
•
The printer settings screen is displayed.
Make the necessary printer settings.
4
5
6
Select a layout and size.
•
To print the date and time with your
image, check the box next to “Print
Date”, and select between “Date” and
“Date & Time”.
Select the thumbnail image that
you want to print and click
“Add”.
•
A preview of the selected image is
displayed on the layout.
9
Select the number of copies.
153
To download and save images to a computer without using OLYMPUS Master
7
Click “Print”.
•
•
Printing starts.
To return to the main menu, click “Menu” in the “Photo Print” window.
To download and save images to a
computer without using OLYMPUS Master
This camera is compatible with USB mass storage. You can connect the
camera to your computer using the USB cable provided with the camera
to download and save images without using OLYMPUS Master. The
following environment is required to use the USB cable to connect the
camera to your computer.
Windows: Windows 98SE/Me/2000 Professional/XP
Macintosh: Mac OS 9.0 to 9.2/X
Note
• If your computer is running Windows 98SE, you will need to install the USB
driver. Before connecting the camera to your computer with the USB cable,
double-click the files from the following folders on the provided OLYMPUS
Master CD-ROM.
(Drive name):\USB\INSTALL.EXE
• Data transfer is not guaranteed in the following environments, even if your
computer is equipped with a USB port.
• Windows 95/98/NT 4.0
• Windows 98SE upgrades from Windows 95/98
• Mac OS 8.6 or earlier
9
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers.
154
10 Appendix
Appendix
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
10
This chapter contains useful information from
OLYMPUS.
• When you get an error message while using
the camera...
• When you press the POWER button but
nothing happens...
• When you want to know how to safely store
your camera...
• When you don’t understand a term used in
the manual...Here is where you’ll find the
answer.
155
Troubleshooting
Error messages
Monitor indication
Possible cause
Corrective action
There is a problem with This card cannot be used. Insert a
q
the card.
new card.
CARD ERROR
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
q
WRITE-PROTECT
The internal memory
has no available
memory and cannot
store any new data.
Insert a card to back up all data or
erase unwanted data. Before
erasing, download important
pictures to a computer.
>
MEMORY FULL
The card has no
available memory and
cannot store any new
data.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
q
CARD FULL
There are no pictures in The internal memory or the card
the internal memory or contains no pictures.
L
NO PICTURE
on the card.
Record pictures.
There is a problem with Use image processing software to
the selected picture and view the picture on a computer. If
it cannot be played back that cannot be done, the image file
r
PICTURE
ERROR
on this camera.
is damaged.
The card cover is open. Close the card cover.
CARD-COVER
OPEN
The batteries are
empty.
Insert new batteries or charge the
batteries.
g
BATTERY
EMPTY
10
156
Troubleshooting
Monitor indication
Possible cause
Corrective action
Set the date/time.
When the camera is
used for the first time or
the batteries have been
removed for a long time,
the date and time are on
the factory default
Y/M/D
setting.
This card cannot be
Format the card or replace the card.
CARD SETUP
used in this camera. Or, • Select [POWER OFF] and press
POWER OFF
FORMAT
the card is not
formatted.
Z. Insert a new card.
• Select [FORMAT] and press Z.
All data on the card is erased.
OK
GO
SELECT
Select [MEMORY FORMAT] and
press Z. All data in the internal
memory is erased. Frames and titles
used to compose images are
erased. Use OLYMPUS Master to
add them in again.
There is an error in the
internal memory.
MEMORY SETUP
POWER OFF
MEMORY FORMAT
OK
GO
SELECT
10
157
Troubleshooting
Troubleshooting
(Preparatory operations
Ref.
page
Possible cause
Corrective action
The camera does not turn on or function buttons do not respond.
The power is off.
Press the POWER button to turn the camera on.
–
The batteries are
installed incorrectly.
Install the batteries correctly.
The battery power is
exhausted.
Insert new batteries or charge the batteries.
–
–
The batteries are
temporarily unable to
function because of the
cold.
Warm the batteries by putting them in your
pocket for a while.
The camera is in the
sleep mode.
Operate the camera with the shutter button or
zoom lever.
–
The camera is connected The camera will not operate while it is
to a computer.
connected to a computer.
(Taking pictures
Ref.
page
Possible cause
Corrective action
No picture is taken when the shutter button is pressed.
The battery power is
exhausted.
Insert new batteries or charge the batteries.
–
The camera is in the
playback mode.
Set the mode dial to a mode other than q.
P. 10
The flash has not
finished charging.
Remove your finger from the shutter button,
and wait until the orange lamp stops blinking
before taking the picture.
The power is off.
Set the mode dial to a mode other than q,
and press the POWER button.
The internal memory or Insert a new card or erase unwanted
card is full.
pictures. Before erasing, download important
pictures to a computer.
10
The batteries ran out of
power during shooting or
while the images were
being written to the internal
memory or the card.
Insert new batteries or charge the batteries.
(Wait until the orange lamp turns off when
blinking.)
–
The memory gauge is full. Wait until there is space in the memory gauge.
–
the card.
158
Troubleshooting
Ref.
page
Possible cause
Corrective action
The monitor does not turn on.
Monitor is turned off.
Press the DISP./GUIDE button several times
to turn on the monitor.
The viewfinder or monitor is hard to see.
*
There is condensation
inside the camera.
Turn the camera off. Before turning it on
again, wait until the camera adjusts to the
surrounding temperature and dries out.
–
The brightness of the
monitor is not adjusted
properly.
Use [s] to adjust the brightness.
The monitor is exposed Block the sunlight with your hand or use the
to direct sunlight. viewfinder.
–
–
Vertical lines appear on Aiming the camera at a bright subject in
the monitor screen
during shooting.
sunlight may cause vertical lines to appear
on the screen. This is not a malfunction.
The date recorded with the image data is wrong.
The date and time is not Set the date/time. The clock is not preset.
set.
The camera has been
left without batteries.
If the camera is left for 3 days without
batteries, the date and time setting is
canceled. Set the date and time again.
The picture is out of focus.
The subject was too
close.
Move further away from the subject. To take
pictures closer than 20 cm (7.9 in.) with the
zoom in the maximum wide position, use the
super macro mode.
The subject is dark.
Set [AF ILLUMINATOR] to [ON].
Auto focus is not
possible.
Use manual focus or focus lock to focus on
the subject and then shoot.
*
There is condensation
inside the camera.
Turn the camera off. Before turning it on
again, wait until the camera adjusts to the
surrounding temperature and dries out.
–
10
159
Troubleshooting
Ref.
page
Possible cause
Corrective action
The monitor goes off.
The camera is in the
sleep mode.
Operate the camera with the shutter button or
zoom lever.
–
The flash does not fire.
The flash is set to [$].
The subject is
illuminated.
Select a flash mode other than [$].
If you want the flash to fire on a brightly
illuminated subject, set the flash to [#].
High speed sequential
shooting or auto
bracketing is set.
The built-in flash does not fire in high speed
sequential shooting or auto bracketing. Set
[DRIVE] to a different setting in [MODE
MENU].
The camera is recording The flash does not fire in the movie mode.
a movie.
Select a shooting mode other than n.
Super macro mode is
set.
The built-in flash does not fire in the super
macro mode. Set [&] to [OFF] or [&].
Panorama mode is set. The flash does not fire in the panorama
mode. Cancel panorama mode.
The battery run time is brief.
You are using the
camera in a cold
environment.
Battery performance deteriorates in low
temperatures. Keep the camera warm by
putting it inside your coat or clothing.
–
–
The remaining battery
power is not indicated
correctly.
When battery consumption fluctuates
considerably, the camera may turn off
without displaying the battery warning
indicator. Insert new batteries or charge the
batteries.
The green and orange lamps on the side of the viewfinder blink simultaneously.
The battery is
exhausted.
Insert new batteries or charge the batteries.
–
* Condensation: When it is cold outside, the water vapor in the air is rapidly cooled and
turns to droplets of water.
Condensation occurs when the camera is suddenly taken from a cold
place into a warm room.
10
160
Troubleshooting
(Playback of recorded images
Ref.
page
Possible cause
Corrective action
The pictures in the internal memory cannot be played back.
The card is inserted in
When a card is inserted, only pictures on the
the camera.
card can be played back. Remove the card.
The picture is out of focus.
A subject unsuited to AF Use the focus lock to focus on the subject.
was taken.
–
The camera moved
Hold the camera correctly and press the
when the shutter button shutter button gently.
was pressed.
Camera movement occurs easily with slower
shutter speeds. When you take a picture with
[$] in a night scene or a dark situation, use
a tripod, or hold the camera firmly.
The subject is dark.
The lens was dirty.
Set [AF ILLUMINATOR] to [ON].
blower blush and then wipe with a lens
cleaner to remove dust. Mold may form on
the lens surface if the lens is left dirty.
The picture is too bright.
The flash was set to [#]. Select a flash mode other than [#].
The center of the subject If the center of the subject is too dark, the
is too dark.
surrounding area emerges as too bright.
Adjust the exposure compensation toward
minus (–).
The [ISO] is at a high
setting.
Set [ISO] to [AUTO] or a low sensitivity such
as [64].
The aperture value is
small in A (M) mode.
Increase the aperture value or set the
camera to P mode.
The shutter speed
setting is too slow in S
(M) mode.
Increase the shutter speed or set the camera
to P mode.
10
161
Troubleshooting
Ref.
page
Possible cause
Corrective action
The picture is too dark.
The flash was blocked
by your finger.
Hold the camera correctly, keeping your
fingers away from the flash.
–
The subject was out of
the working range of the
flash.
Shoot within the flash working range.
The flash was set to [$]. Select a flash mode other than [$].
The subject was too
small and was backlit.
The sequential shooting Higher shutter speeds are used during
mode was used.
sequential shooting, which may result in
pictures that are darker than usual. Set
[DRIVE] to [o].
The center of the subject If the center of the subject is too bright, the
is too bright.
image as a whole emerges darker. Adjust the
exposure compensation toward plus (+).
The aperture value is too Decrease the aperture value or set the
high in A (M) mode. camera to P mode.
The shutter speed is too Reduce the shutter speed or set the camera
fast in S (M) mode. to P mode.
The colors of pictures look unnatural.
Indoor lighting affected
the picture’s colors.
Set the white balance according to the
lighting.
No white in the picture.
Include something white in the picture, or
shoot using [#].
The white balance
setting is wrong.
Adjust the white balance according to the
light source.
Part of the picture is dark.
The lens was partly
Hold the camera correctly, keeping your
–
blocked by your finger or fingers and the strap away from the lens.
the strap.
10
162
Troubleshooting
Ref.
page
Possible cause
Corrective action
Pictures you have taken do not appear on the monitor.
The power is off.
Set the mode dial to a mode other than q,
and press the POWER button.
The camera is in the
shooting mode.
Press the QUICK VIEW button or set the
mode dial to q.
There are no pictures in [NO PICTURE] is displayed on the monitor.
–
the internal memory or
on the card.
Record pictures.
the card.
The camera is
The monitor does not function when the AV
cable is connected to the camera.
connected to a TV.
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Cancel the protection of the pictures.
No picture is displayed on the TV when connected to the camera.
The video output signal Set the video output signal according to the
–
is incorrect.
region where used.
The TV video signal
setting is incorrect.
Set the TV to the video input mode.
The monitor is hard to see.
The brightness of the
monitor is not adjusted
properly.
Use [s] to adjust the brightness.
–
The monitor is exposed Block the sunlight with your hand.
to direct sunlight.
10
163
Troubleshooting
(When the camera is connected to a computer or printer
Ref.
page
Possible cause
Corrective action
The printer fails to connect.
monitor after connecting Step 1 of “Printing pictures”.
the camera to the printer
with the USB cable.
The printer does not
support PictBridge.
Refer to the instruction manual for your
printer. Or, contact your printer manufacturer.
–
The camera is not recognized by the computer.
The computer failed to
recognize the camera.
and connect it again.
The USB driver has not Install OLYMPUS Master.
been installed.
10
164
Camera care
(Cleaning the camera
Exterior:
•
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild
soapy water and wring well. Wipe the camera with the damp cloth and then dry it
with a dry cloth. If you have used the camera at the beach, use a cloth soaked in
clean water and wrung well.
Monitor:
•
Wipe gently with a soft cloth.
Lens:
•
Blow dust off the lens with a commercial blower, then wipe gently with a lens
cleaner.
Note
• Do not use strong solvents such as benzene or alcohol, or chemically treated
cloth.
• Mold may form on the lens surface if the lens is left dirty.
(Storage
•
When storing the camera for extended periods, remove the batteries, AC adapter
and card, and keep in a cool, dry place that is well ventilated.
•
Periodically insert the batteries and test the camera functions.
Note
• Avoid leaving the camera in places where chemical products are handled since
this may result in corrosion.
10
165
Batteries
(The following batteries can be used with this camera. Choose the power
source best suited to the situation.
AA (R6) alkaline batteries
When you need batteries in a hurry, you can use
AA (R6) alkaline batteries, which are easy to
obtain anywhere. However, the number of
pictures that you can take may vary considerably
depending on the battery manufacturer, shooting
conditions, etc.
This camera uses two AA (R6) alkaline batteries.
NiMH batteries
Olympus NiMH batteries are rechargeable and economical. However,
repeatedly charging the batteries before using up their capacity will shorten
the life of the batteries per charge.
The batteries are not fully charged at the time of purchase. Charge the
batteries with the battery charger specified by Olympus before use. For
more details, refer to the instruction manual attached to the charger.
This camera uses two NiMH batteries.
Lithium battery pack (CR-V3)
The Olympus CR-V3 lithium battery pack has a long service life allowing you
to use the camera longer than with alkaline batteries. However, it cannot be
recharged. Do not remove the label on the battery pack.
This camera uses one lithium battery pack.
Manganese (zinc-carbon) batteries cannot be used.
(Power consumption by the camera varies depending on which functions are
used.
(During the conditions described below, power is consumed continuously
and the batteries become exhausted quickly.
• The zoom is used repeatedly.
• The shutter button is pressed halfway repeatedly in shooting mode,
activating the auto focus.
• Set [FULLTIME AF] to [ON].
• A picture is displayed on the monitor for an extended period of time.
• The camera is connected to a computer or printer.
(Battery life varies depending on the type of battery, manufacturer, shooting
conditions, etc.
10
Similarly, the camera may turn off without displaying the battery level
warning or may display the battery level warning more quickly.
166
Accessories (optional)
AC adapter
An AC adapter is useful for time-consuming tasks such as image
downloads to a computer.
Use the Olympus AC adapter to power your digital camera from a common
AC wall outlet. Do not use any other AC adapter with this camera.
AC wall outlet
DC-IN jack
Power plug
AC adapter
Connection cord plug
Note
• If the battery power runs out while the camera is connected to a computer or
printer, the image data may be lost or damaged. It is recommended that you
use the AC adapter. Do not connect or disconnect the AC adapter while the
camera is connected to a computer or printer.
• Do not remove or load the batteries or connect or disconnect the AC adapter
while the camera is turned on. Doing so could affect the camera’s internal
settings or functions.
• The AC adapter can be used within the range of AC 100 V to AC 240 V
(50/60 Hz).
When using abroad, you may need a plug adapter to convert the plug to match
the AC wall outlet. For details, ask at your local electrical shop or travel agent.
• Do not use travel voltage converters as they could damage your AC adapter.
• Be sure to read the instruction manual for the AC adapter.
10
167
Accessories (optional)
Using commercially available external flashes
When selecting an external flash, use products which meet the following basic
conditions.
(1) Some flashes available on the market operate with a high voltage synchro
terminal. If one of these is used, it may damage the camera, and/or the camera
may not function normally. Contact the manufacturer of the flash you are using
concerning the specifications of the flash’s synchro terminal.
(2) Some flashes available on the market have the polarity of the synchro terminal
reversed. In this case, even if the flash is connected, it will not fire. Contact the
manufacturer of the flash for more information.
(3) Exposures when using an external flash require that adjustments be made on the
external flash unit. If an external flash is used in the auto mode, match it with the
F value and ISO settings on the camera.
(4) Even if the auto F value and ISO of the external flash are set to the same
conditions as those on the camera, depending on the photographic conditions, it
is possible that the correct exposure may not be obtained anyway. In such a
case, adjust the auto F value or ISO value on the external flash unit or calculate
the distance in the manual mode and use it that way.
(5) Use a flash whose illuminating angle covers the angle of view of the lens.
However, in close-up photography with the lens on the wide setting, the bottom
of the image may not expose correctly. The ideal is to have a wide angle adapter
to fit on the flash and spread the illumination angle so it is wider.
(6) Use a flash unit with a flash time of 1/200 sec. or less when using the flash at full
strength. For devices with a long flash time, a portion of the light emitted will not
contribute to the exposure.
(7) If a flash unit or other accessory TTL flash that has additional
communications functions other than an Olympus FL series flash is used,
it may not only fail to function normally, but may also cause damage to the
camera’s circuitry. Do not use such a device.
10
168
Safety Precautions
Caution for Usage Environment
• To protect the high-precision technology contained in this product, never
leave the camera in the places listed below, no matter if in use or storage:
• Places where temperatures and/or humidity are high or go through
extreme changes. Direct sunlight, beaches, locked cars, or near other
heat sources (stove, radiator, etc.) or humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using products with
weatherproof designs, read their manuals as well.
• In places prone to strong vibrations.
• Never drop the camera or subject it to severe shocks or vibrations.
• When mounted on a tripod, adjust the position of the camera with the tripod
head. Do not twist the camera.
• Do not touch electric contacts on cameras.
• Do not leave the camera pointed directly at the sun. This may cause lens or
shutter curtain damage, color failure, ghosting on the CCD, or may possibly
cause fires.
• Do not push or pull severely on the lens.
• Before storing the camera for a long period, remove the batteries. Select a
cool, dry location for storage to prevent condensation or mold from forming
inside the camera. After storage, test the camera by turning it on and
pressing the shutter button to make sure that it is operating normally.
• Always observe the operating environment restrictions described in the
camera’s manual.
Battery Handling Precautions
• Olympus NiMH batteries (included in some areas) are intended for use only
with Olympus digital cameras. Never use these batteries with any other
device.
• Always charge NiMH batteries (included in some areas) before using them
for the first time, or if they have not been used for a long period.
• Always charge sets of batteries (included in some areas) (2 or 4) together.
• Do not use alkaline batteries unless it is absolutely necessary. In some
cases, alkaline batteries may have a shorter service life than NiMH batteries
or CR-V3 lithium battery packs. Alkaline battery performance is limited,
especially at low temperatures. The use of NiMH batteries is recommended.
• AA manganese (Zinc-Carbon) batteries cannot be used with this camera.
• When operating the camera with battery power at low temperatures, try to
keep the camera and spare batteries as warm as possible. Batteries which
run down at low temperatures may be restored after they are warmed at
room temperature.
10
169
Safety Precautions
• Recommended temperature ranges for NiMH batteries:
Operation ................. 0°C to 40°C (32°F to 104°F)
Charge ..................... 0°C to 40°C (32°F to 104°F)
Storage..................... -20°C to 30°C (-4°F to 86°F)
• Using, charging, or storing the batteries outside these ranges could shorten
battery life or affect battery performance. Always unload the batteries from
the camera before storing the camera for a long period.
• Before using NiMH or NiCd batteries, always read the provided instructions.
• The number of pictures you can take may vary depending on the shooting
conditions or batteries.
• Before going on a long trip, and especially before traveling abroad, purchase
an ample supply of extra batteries. The recommended batteries may be
difficult to obtain while traveling.
• Please recycle batteries to help save our planet’s resources. When you
throw away dead batteries, be sure to cover their terminals and always
observe local laws and regulations.
LCD Monitor
• Do not push the monitor forcibly; otherwise the image may become vague,
resulting in a playback mode failure or damage to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but this is not a
malfunction.
• When a subject is viewed diagonally in the camera, the edges may appear
zigzagged on the monitor. This is not a malfunction; it will be less noticeable
in playback mode.
• In places subject to low temperatures, the LCD monitor may take a long time
to turn on or its color may change temporarily. When using the camera in
extremely cold places, it is a good idea to occasionally place it in a warm
place. An LCD monitor exhibiting poor performance due to low temperatures
will recover in normal temperatures.
• The LCD used for the monitor is made with high-precision technology.
However, black spots or bright spots of light may appear constantly on the
LCD Monitor. Due to its characteristics or the angle at which you are viewing
the monitor, the spot may not be uniform in color and brightness. This is not
a malfunction.
Legal and Other Notices
10
• Olympus makes no representations or warranties regarding any damages,
or benefit expected by using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use of this product.
• Olympus makes no representations or warranties regarding any damages or
any benefit expected by using this unit lawfully which are caused by erasing
picture data.
170
Safety Precautions
Disclaimer of Warranty
• Olympus makes no representations or warranties, either expressed or
implied, by or concerning any content of these written materials or software,
and in no event shall be liable for any implied warranty of merchantability or
fitness for any particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss of business
profits, business interruption and loss of business information) arising from
the use or inability to use these written materials or software or equipment.
Some countries do not allow the exclusion or limitation of liability for
consequential or incidental damages, so the above limitations may not apply
to you.
• Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of copyrighted material may violate
applicable copyright laws. Olympus assumes no responsibility for unauthorized
photographing, use or other acts that infringe upon the rights of copyright
owners.
Copyright Notice
All rights reserved. No part of these written materials or this software may be
reproduced or used in any form or by any means, electronic or mechanical,
including photocopying and recording or the use of any type of information
storage and retrieval system, without the prior written permission of Olympus.
No liability is assumed with respect to the use of the information contained in
these written materials or software, or for damages resulting from the use of the
information contained therein. Olympus reserves the right to alter the features
and contents of this publication or software without obligation or advance
notice.
10
171
Safety Precautions
FCC Notice
• Radio and Television Interference
Changes or modifications not expressly approved by the manufacturer may
void the user’s authority to operate this equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help. Only
the OLYMPUS-supplied USB cable should be used to connect the camera
to USB enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the
user’s authority to operate.
10
172
Glossary of terms
A (Aperture Priority) Mode
You set the aperture yourself and the camera automatically varies the shutter speed
so that the picture is taken with the best exposure.
AE (Automatic Exposure)
The camera automatically sets the exposure. The 3 AE modes available on this
camera are P mode, in which the camera selects both the aperture and shutter
speed, A mode, in which the user selects the aperture and the camera sets the
shutter speed, and S mode, in which the user selects the shutter speed and the
camera sets the aperture. In M mode, the user selects both the aperture and the
shutter speed.
Aperture
The adjustable lens opening which controls the amount of light that enters the
camera. The larger the aperture, the shorter the depth of field and the fuzzier the
background. The smaller the aperture, the greater the depth of field and the sharper
the background. Larger aperture values indicate smaller apertures, and smaller
aperture values indicate larger apertures.
CCD (Charge-Coupled Device)
This converts light passing through the lens into electrical signals. On this camera,
light is picked up and converted into RGB signals to build a single image.
DCF (Design Rule for Camera File System)
A standard for image files by the Japan Electronics and Information Technology
Industries Association (JEITA).
DPOF (Digital Print Order Format)
This is for saving desired print settings on digital cameras. By entering which images
to print and the number of copies of each, the user can easily have the desired
images printed by a printer or print lab that supports the DPOF format.
Eclipsing (Vignetting)
This refers to when an object obscures part of the field of view so that the whole
subject is not photographed. Vignetting also refers to when the image seen through
the viewfinder does not exactly match the image shot through the objective lens, so
the photographed image includes objects not seen through the viewfinder. In
addition, vignetting can occur when an incorrect lens hood is used, causing
shadowing to appear in the corners of the image.
ESP (Electro-Selective Pattern) Light Metering/Digital ESP Light
Metering
This determines the exposure by metering and calculating the light levels in the
center and other areas of the image separately.
10
EV (Exposure Value)
A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter
speed is 1 second. The EV then increases by 1 each time the aperture increases by
one F stop or the shutter speed increases by one increment. EV can also be used to
indicate brightness and ISO.
173
Glossary of terms
Exposure
The amount of light used to capture an image. The exposure is determined by the
time the shutter is open (shutter speed) and the amount of light that passes through
the lens (aperture).
Flash Bracket
A mount used to attach an external flash to the camera. Shadows on the subject can
be changed by detaching the flash. The flash is used in combination with the flash
cable.
Image Size
The size of an image expressed by the number of pixels that make up the image. For
instance, a picture taken with an image size of 640 × 480 fills the computer screen
when the monitor setting is 640 × 480. However, if the monitor setting is
1,024 × 768, the picture only takes up part of the screen.
ISO
A method for indicating film speed by the International Organization for
Standardization (ISO) (ex. “ISO100”). Higher ISO values indicate greater sensitivity
to light, so images can be exposed even in low-light conditions.
JPEG (Joint Photographic Experts Group)
A compression format for still images. Photographs (pictures) taken using this
camera are recorded onto the card in JPEG format. By downloading these images
to a computer, users can edit them using graphics application software or view the
images using an Internet web browser.
M (Manual) Mode
The user sets both the aperture and shutter speed.
Noise reduction
When shooting in dark places, shutter speeds become slower as there is less light
focused on the CCD. During long exposures, signals are generated by parts of the
CCD where no light is focused and are recorded on the picture as noise. When noise
reduction works, the camera automatically reduces the noise to produce clearer
images.
NTSC (National Television Systems Committee) / PAL (Phase
Alternating Line)
Television formats. NTSC is mainly used in Japan, North America and Korea. PAL
is mainly used in Europe and China.
P (Program) Mode
Also called Program AE mode. The camera automatically sets the best shutter
speed and aperture for the shot.
10
PictBridge
A standard for connecting digital cameras and printers of different makers and
printing out pictures directly.
174
Glossary of terms
Pixels
A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed
images require millions of pixels.
S (Shutter Priority) Mode
Also called Shutter Priority AE mode. The user selects the shutter speed and the
camera automatically varies the aperture so that the picture is taken with the best
exposure.
Slave Flash
A wireless flash that is not connected to the camera by a synchronization cord. It
flashes in phase with the flash on the camera and can be used for lighting
techniques, such as changing the way shadows are cast on a subject.
Sleep Mode
A mode designed to save battery life. The camera automatically enters the sleep
mode if you do not operate it for a certain time. To exit the sleep mode, use any
button on the camera (shutter button, arrow pad, etc.).
Synchro Terminals
Terminals on an external flash unit for connecting it to the camera.
TFT (Thin-Film Transistor) Color Monitor
A transistor color monitor constructed using thin-film technology.
TTL-AUTO
For use with an external flash. Light emitted by the flash is measured by the light
receptor in the camera as it passes through the lens. A signal is then sent to adjust
the external flash intensity.
10
175
Miscellaneous
ꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ
11
This chapter contains all the camera functions
described in Chapters 1 to 9.
Refer here for lists of the top menus and mode
menus.
The index helps you find the pages containing
a function or item that you are looking for. For
effective use of the manual, reference page
numbers are listed in the menu lists.
176
Menu list
Shooting mode menus (P, A, S, M, r, f)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
CAMERA ESP/n
ESP, n, 4
&
OFF, &, %
DRIVE
7
ISO
(SP-310)
AUTO, 50, 100, 200, 400
(SP-350)
*1
r1/2/3/4
sMY MODE 1 –
dMY MODE 4
Y
OFF, ON
w
-2.0 – +2.0
SYNCRO
#
#SYNC1, #SYNC2
QFLASH
IN, SLAVE (SP-310)
IN+Q
, Q,
SLAVE (SP-350)
DIGITAL ZOOM
OFF, ON
NOISE REDUCTION OFF, ON
AF MODE
FOCUS MODE
FULLTIME AF
PANORAMA
R
iESP, SPOT, AREA
AF, MF
OFF, ON
OFF, ON
OFF, ON
TIMELAPSE
PICTURE
K
RAW
SHQ
3072 × 2304,
3:2 3072 × 2048 (SP-310)
3264 × 2448,
3:2 3264 × 2176 (SP-350)
HQ
3072 × 2304,
3:2 3072 × 2048 (SP-310)
3264 × 2448,
3:2 3264 × 2176 (SP-350)
SQ1
SQ2
2048 × 1536, 1600 × 1200
11
640 × 480
177
Menu list
Shooting mode menus (P, A, S, M, r, f)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
PICTURE WB
AUTO
PRESET
y
V
>
RED7 – BLUE7
-5 – +5
SHARPNESS
CONTRAST
SATURATION
-5 – +5
-5 – +5
MEMORY MEMORY FORMAT
(CARD) (FORMAT)
YES, NO
BACKUP
YES, NO
YES, NO
SETUP RESET
*
W
PW ON SCREEN
OFF, 1, 2
SETUP
SOUND
OFF, 1, 2
PWOFF SCREEN
OFF, 1, 2
SETUP
SOUND
OFF, 1, 2
REC VIEW
8
OFF, ON
OFF, LOW, HIGH
OFF, 1, 2
BEEP
SHUTTER SOUND
MY MODE SETUP
OFF, 1, 2
CURRENT, RESET,
CUSTOM
FILE NAME
PIXEL MAPPING
s
RESET, AUTO
X
DUAL TIME SETUP
m/ft
OFF, ON
m, ft
VIDEO OUT
AF ILLUMINATOR
SHORT CUT
u
NTSC, PAL
OFF, ON
A, B, C
OFF, ON, DIRECT
OFF, w, x
11
FRAME ASSIST
CUSTOM BUTTON
*
Available languages vary depending on the area where you purchased this camera.
178
Menu list
Shooting mode menus (P, A, S, M, r, f)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
*2
(Y)
*2
(K)
*3
SCENE/(&)
*1 Only available in rmode.
*2 The function registered in [SHORT CUT] is displayed.
*3 In fmode, [SCENE] is displayed. In other modes, the function registered
in [SHORT CUT] is displayed.
11
179
Menu list
Shooting mode menus (n)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
CAMERA ISO
(SP-310)
AUTO, 50, 100, 200, 400
(SP-350)
FULLTIME AF
R(movies)
OFF, ON
OFF, ON
PICTURE WB
AUTO
PRESET
y
V
>
RED7 – BLUE7
-5 – +5
SHARPNESS
CONTRAST
SATURATION
-5 – +5
-5 – +5
MEMORY MEMORY FORMAT
(CARD) (FORMAT)
YES, NO
BACKUP
YES, NO
YES, NO
SETUP RESET
*
W
PW ON SCREEN
OFF, 1, 2
SETUP
SOUND
OFF, 1, 2
PWOFF SCREEN
OFF, 1, 2
SETUP
SOUND
OFF, 1, 2
8
BEEP
OFF, LOW, HIGH
OFF, 1, 2
FILE NAME
PIXEL MAPPING
s
RESET, AUTO
X
DUAL TIME SETUP
VIDEO OUT
NTSC, PAL
OFF, ON
DIGITAL ZOOM
K
SHQ 640 × 480 30 fps,
HQ 640 × 480 15 fps,
SQ1 320 × 240 30 fps,
SQ2 320 × 240 15 fps
11
h
OFF, ON
*
Available languages vary depending on the area where you purchased this camera.
180
Menu list
Shooting mode menus (h)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
MEMORY MEMORY FORMAT
(CARD) (FORMAT)
YES, NO
BACKUP
YES, NO
YES, NO
SETUP RESET
*
W
PW ON SCREEN
SETUP
OFF, 1, 2
SOUND
OFF, 1, 2
PWOFF SCREEN
SETUP
OFF, 1, 2
SOUND
OFF, 1, 2
REC VIEW
8
OFF, ON
OFF, LOW, HIGH
OFF, 1, 2
BEEP
SHUTTER SOUND
FILE NAME
PIXEL MAPPING
s
OFF, 1, 2
RESET, AUTO
X
DUAL TIME SETUP
OFF, ON
m/ft
m, ft
VIDEO OUT
AF ILLUMINATOR
u
NTSC, PAL
OFF, ON
OFF, ON, DIRECT
OFF, w, x
FRAME ASSIST
Y
OFF, ON
K
SHQ
HQ
3072 × 2304,
3:2 3072 × 2048 (SP-310)
3264 × 2448,
3:2 3264 × 2176 (SP-350)
3072 × 2304,
3:2 3072 × 2048 (SP-310)
3264 × 2448,
3:2 3264 × 2176 (SP-350)
SQ1
SQ2
2048 × 1536, 1600 × 1200
640 × 480
11
&
OFF, &, %
*
Available languages vary depending on the area where you purchased this camera.
181
Menu list
Playback mode menus (q) (still pictures)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
PLAY
0
y
OFF, ON
+90°, 0°, -90°
m
NORMAL, SCROLL,
FADER, ZOOM DOWN,
ZOOM UP,
CHECKERBOARD,
BLINDS, SWIVEL,
RANDOM
<
<, U
R
ALBUM ENTRY
SEL. IMAGE, SET
CALENDAR, SET ALL,
CANCEL
EDIT
RAW
DATA
EDIT
K
SHQ, HQ, SQ1, SQ2
AUTO, PRESET, V
RED7 – BLUE7
WB
>
SHARPNESS -5 – +5
CONTRAST -5 – +5
SATURATION -5 – +5
Q
640
×
480, 320
×
240,
CANCEL
P
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
NEW FILE, CANCEL
REDEYE FIX
BLACK & WHITE
SEPIA
FRAME
TITLE
CALENDAR
LAYOUT
BRIGHTNESS
SATURATION
MEMORY ALL ERASE
YES, NO
YES, NO
(CARD)
MEMORY
11
FORMAT(FORMAT)
BACKUP
YES, NO
182
Menu list
Playback mode menus (q) (still pictures)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
SETUP RESET
YES, NO
*1
W
PW ON SCREEN
SETUP
OFF, 1, 2
OFF, 1, 2
OFF, 1, 2
OFF, 1, 2
SOUND
PWOFF SCREEN
SETUP
SOUND
SCREEN SETUP
SETUP
VOLUME
8
0 – 5
OFF, LOW, HIGH
OFF, 1, 2
BEEP
s
X
DUAL TIME SETUP
VIDEO OUT
OFF, ON
NTSC, PAL
*2
EDIT
–
ALBUM
CALENDAR
*1 Available languages vary depending on the area where you purchased this
camera.
*2 This is the same as the [MODE MENU] [EDIT] menu.
11
183
Menu list
Playback mode menus (q) (movies)
Ref.
Page
Top menu
Tab
Item
Sub menu
Settings
MODE MENU
PLAY
0
OFF, ON
INDEX PLAY
ALBUM ENTRY
SEL. IMAGE,
SET CALENDAR,
SET ALL, CANCEL
EDIT
INDEX
EDIT
NEW FILE, CANCEL
CANCEL
MEMORY ALL ERASE
(CARD)
YES, NO
YES, NO
MEMORY FORMAT
(FORMAT)
BACKUP
YES, NO
YES, NO
SETUP RESET
*
W
PW ON SCREEN
SETUP
OFF, 1, 2
OFF, 1, 2
OFF, 1, 2
OFF, 1, 2
0 – 5
SOUND
PWOFF SCREEN
SETUP
SOUND
VOLUME
8
OFF, LOW, HIGH
OFF, 1, 2
BEEP
s
X
DUAL TIME SETUP
VIDEO OUT
OFF, ON
NTSC, PAL
MOVIE PLAY
ALBUM
CALENDAR
*
Available languages vary depending on the area where you purchased this camera.
11
184
Menu list
Playback mode menus for album playback mode (q)
Ref.
Page
Top menu
Item
Settings
ALBUM MENU
0
OFF, ON
*1
y
+90°, 0°, -90°
OK, CANCEL
SELECT TITLE IMAGE
UNDO ENTRY
CANCEL
*1
<, U
<
s
VOLUME
VIDEO OUT
0 – 5
NTSC, PAL
*1
*2
m
, MOVIE PLAY
CLOSE ALBUM
SEL. ALBUM
*1 Not displayed for movies.
*2 Not displayed for still pictures.
11
185
List of factory default settings
The functions are set as follows when the camera leaves the factory.
Shooting mode
Information display
Information on screen
(DISP./GUIDE)
Optical zoom
Wide
FNo.
F2.8
SHUTTER SPEED
1/1000
F
0.0
Flash
Still pictures: AUTO (S, M: #)
Movies: $
AEL
OFF
ESP/n
&
ESP
OFF
DRIVE
o
ISO
AUTO (A, S, M: 64 (SP-310), 50 (SP-350))
r1/2/3/4
Y
sMY MODE 1
OFF
w
0.0
#SYNCRO
QFLASH
DIGITAL ZOOM
NOISE REDUCTION
AF MODE
FOCUS MODE
FULLTIME AF
#SYNC1
IN (SP-310) / IN+Q (SP-350)
OFF
OFF
iESP
AF
Still pictures: OFF
Movies: ON
OFF
R (still pictures)
TIMELAPSE
R (movies)
K
OFF
OFF
Still pictures: HQ 3072 × 2304 (SP-310)
HQ 3264 × 2448 (SP-350)
Movies: HQ (640 × 480 15 fps)
h
OFF
11
WB
AUTO
>
No compensation
186
List of factory default settings
SHARPNESS
CONTRAST
SATURATION
REC VIEW
±0
±0
±0
ON
SHUTTER SOUND
FILE NAME
1 - LOW
RESET
m
m/ft
AF ILLUMINATOR
SHORT CUT
u
ON
A: Y, B: K, C: &
ON
FRAME ASSIST
CUSTOM BUTTON
w
AE LOCK
Playback mode
Information display
Information off screen
(DISP./GUIDE)
0
y
OFF
0°
m
NORMAL
R
OFF
3
VOLUME
Others
Monitor
ON
W*
PW ON SETUP
PW OFF SETUP
8
SCREEN: OFF, SOUND: OFF
SCREEN: OFF, SOUND: OFF
LOW
BEEP
1 - LOW
s
±0
X
Y-M-D 2005.01.01 00:00
OFF
DUAL TIME SETUP
VIDEO OUT
NTSC or PAL*
*
Settings differ according to the region where the camera is sold.
11
187
Functions available in shooting modes
and scenes
Some functions cannot be set in certain shooting modes. For more details,
refer to the table below. In rmode, available functions vary depending
on the modes set in the [MY MODE SETUP] menu.
In fmode, in order to produce specialized effects, some scenes limit
control of certain functions. Those functions are indicated with an
.
For details, refer to “Functions with limited operations by scene” (P.190).
Modes and shooting functions
Shooting mode
h
P
A
S
M f
A
Function
Flash
AUTO
!
#
9
9
—
—
—
—
—
—
—
9
9
9
9
9
H
$
Information display
Optical zoom
F
—
9
—
—
—
—
—
9
—
9
AE LOCK
AF LOCK
AREA
9
9
9
9
9
9
—
—
—
—
—
—
—
9
ESP/n
&
%
*1
DRIVE
ISO
—
—
9
9
*2
9
9
9
9
9
9
9
9
9
9
Y
—
—
—
—
—
—
w
—
—
—
—
—
—
—
#SYNCRO
QFLASH
IN (SP-310)
IN+Q (SP-350)
Q (SP-350)
SLAVE
11
—
DIGITAL ZOOM
9
188
Functions available in shooting modes and scenes
Shooting mode
h
P
A
S
M f
A
Function
NOISE REDUCTION
AF MODE
FOCUS MODE
PANORAMA
R (still pictures)
TIMELAPSE
FULLTIME AF
R (movies)
h
—
—
—
—
—
—
—
9
9
9
—
9
9
9
—
—
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
—
—
—
—
—
—
9
9
9
9
*3
K
9
WB
—
—
—
—
—
>
SHARPNESS
CONTRAST
SATURATION
MEMORY FORMAT (FORMAT)
BACKUP
RESET
W
PW ON SETUP
PW OFF SETUP
REC VIEW
8
—
BEEP
SHUTTER SOUND
MY MODE SETUP
FILE NAME
PIXEL MAPPING
s
—
—
—
11
X
DUAL TIME SETUP
m/ft
—
189
Functions available in shooting modes and scenes
VIDEO OUT
9
9
9
9
9
9
AF ILLUMINATOR
—
—
—
—
—
SHORT CUT
u
—
—
FRAME ASSIST
CUSTOM BUTTON
*1 [BKT] is not available.
*2 [AUTO] is not available.
*3 [RAW] is not available.
Functions with limited operations by scene
Scene
B
C
N
V
F
D
k
a
G
U
W
c
j
P
e
f
S
R
X
d
i
l
Z
a
Function
Flash
9
—
9
—
9
Optical zoom
AREA
9
—
9
—
9
—
—
—
9
*1
&
%
DRIVE
9
9
—
—
—
9
9
9
9
9
9
9
9
—
9
9
—
—
9
ISO
9
9
—
9
Y
—
9
w
9
9
—
—
9
9
—
—
9
9
#SYNCRO
DIGITAL ZOOM
NOISE REDUCTION
AF MODE
FOCUS MODE
PANORAMA
R (still pictures)
TIMELAPSE
K
9
—
—
9
*2
*2
—
9
9
—
9
9
9
—
—
9
9
9
9
9
9
9
—
—
—
9
9
9
*3
—
9
REC VIEW
AF ILLUMINATOR
—
—
—
9
11
*1 This is fixed at [&].
*2 This is fixed at [ON].
*3 The record mode is fixed at [640 × 480] in [SQ2].
190
Index
G
H
High speed sequential
E
..............................................47
I
F
J
L
LANDSCAPE+PORTRAIT
..............................................64
M
11
192
Index
............................................115
Multi-connector
Q
............................................118
R
N
..............................................28
.............................................. 52
Recording sound with still
O
RESET (MY MODE SETUP)
P
S
11
193
Index
U
UNDER WATER MACRO
.............................................. 39
.............................................. 87
V
W
.............................................. 66
X
Z
T
11
194
http://www.olympus.com/
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan
Two Corporate Center Drive, P.O. Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 631-844-5000
Technical Support (USA)
24/7 online automated help: http://www.olympusamerica.com/support
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Our phone customer support is available from 8 am to 10 pm
(Monday to Friday) ET
E-Mail: [email protected]
Olympus software updates can be obtained at: http://www.olympus.com/digital
Premises: Wendenstrasse 14-18, 20097 Hamburg, Germany
Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61
Goods delivery: Bredowstrasse 20, 22113 Hamburg, Germany
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
European Technical Customer Support:
Please visit our homepage http://www.olympus-europa.com
or call our TOLL FREE NUMBER* : 00800 - 67 10 83 00
for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom
* Please note some (mobile) phone service providers do not permit access or request an
additional prefix to +800 numbers.
For all European Countries not listed and in case that you can’t get connected
to the above mentioned number, please make use of the following
CHARGED NUMBERS: +49 180 5 - 67 10 83 or +49 40 - 237 73 899
Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday)
© 2005
VH265901
|