OPPO Digital OPPO BDP 93 User Manual

®
USER MANUAL  
READ CAREFULLY BEFORE OPERATION  
Blu-ray Disc Player BDP-93  
Table of Contents  
Important Information............................................................... 1  
Important Safety Instructions ....................................................................................1  
Precautions .................................................................................................................2  
FCC Statement ............................................................................................................2  
Trademarks .................................................................................................................2  
Compatible Disc Types ...............................................................................................3  
Discs that cannot be played.............................................................................................................3  
Disc care and handling ....................................................................................................................3  
Notes about BD-ROM compatibility.................................................................................................4  
Copyright Protection...................................................................................................4  
Region management information.....................................................................................................4  
INSTALLATION .......................................................................... 5  
Front Panel Controls ...................................................................................................5  
Front Panel Display Windows .....................................................................................5  
Rear Panel Connectors ...............................................................................................6  
Remote Control ...........................................................................................................7  
Remote Control Buttons ..................................................................................................................7  
Back Side.........................................................................................................................................8  
Battery Installation ...........................................................................................................................8  
Using the Remote Control ...............................................................................................................8  
Changing the Remote Code ............................................................................................................9  
Connecting to a Display (Recommended Methods).................................................10  
HDMI Connection to a single TV ...................................................................................................10  
HDMI Connection to Two (2) TVs..................................................................................................11  
DVI Connection..............................................................................................................................12  
Component Video Connection.......................................................................................................13  
Connecting to an Audio System ...............................................................................14  
Connecting to a Receiver/Amplifier with HDMI Input/Output.........................................................14  
Connecting to a Receiver/Amplifier with 7.1ch/5.1ch Audio Input .................................................15  
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder........................................16  
Connecting to a Stereo Audio System...........................................................................................17  
Connecting to a Display and Audio System using Dual HDMI.................................18  
Connecting to the Internet .......................................................................................19  
Internet connection through Ethernet cable...................................................................................19  
Internet connection through wireless adaptor................................................................................20  
Custom Installation...................................................................................................21  
External IR (Infrared Remote) Installation .....................................................................................21  
RS232 Control ...............................................................................................................................21  
i
Setting Up the Player - Easy Setup Wizard.............................................................. 22  
Access the Easy Setup Wizard......................................................................................................22  
Choose the Primary Video Output .................................................................................................22  
Select the Best Output Resolution.................................................................................................23  
Determine the Display Aspect Ratio ..............................................................................................24  
Select the Audio Setting.................................................................................................................26  
Complete the Easy Setup Wizard..................................................................................................26  
BASIC OPERATIONS................................................................ 27  
Disc Playback............................................................................................................ 27  
Fast Playback............................................................................................................ 27  
Pause and Frame-by-Frame...................................................................................... 28  
Slow Playback........................................................................................................... 28  
Blu-ray Disc Menu Playback..................................................................................... 29  
DVD Menu Playback.................................................................................................. 29  
On-Screen Display..................................................................................................... 29  
Volume Control ......................................................................................................... 30  
Mute........................................................................................................................... 30  
Audio Language/Track Selection ............................................................................. 30  
Subtitle Selection ..................................................................................................... 31  
Angle Selection......................................................................................................... 31  
Picture-in-Picture and Secondary Audio.................................................................. 31  
BD-Live ...................................................................................................................... 32  
ADVANCED OPERATIONS ....................................................... 33  
TV System Selection ................................................................................................ 33  
Output Resolution..................................................................................................... 33  
Zooming and Aspect Ratio Control .......................................................................... 34  
Zoom Levels for HDMI 1 Output ....................................................................................................34  
Zoom Levels for HDMI 2 & Analog (Component) Video Output ....................................................36  
Subtitle Shift ............................................................................................................. 37  
Repeat Playback....................................................................................................... 37  
Repeat a Selected Section....................................................................................... 38  
Shuffle and Random Playback.................................................................................. 38  
Playback by Chapter or Track Number.................................................................... 38  
Playback from a Specific Location .......................................................................... 39  
DVD and Blu-ray Discs ..................................................................................................................39  
CD and SACD discs.......................................................................................................................40  
Memory and Automatic Resume .............................................................................. 41  
Viewing Pictures on DVD-Audio Discs ..................................................................... 41  
Pure Audio Mode....................................................................................................... 41  
MEDIA FILE PLAYBACK........................................................... 42  
ii  
Playback from a USB or e-SATA Drive .....................................................................42  
The Home Menu.........................................................................................................43  
Playing Music Files....................................................................................................44  
Playing Movie Files....................................................................................................45  
Viewing Photo Files...................................................................................................46  
Adding Background Music ........................................................................................46  
SETUP MENU OPTIONS...........................................................47  
Using the Setup Menu System..................................................................................47  
Playback Setup..........................................................................................................50  
Video Setup ...............................................................................................................52  
Picture Adjustment.........................................................................................................................55  
HDMI Options ................................................................................................................................58  
Audio Format Setup...................................................................................................60  
Audio Signal Reference Chart .......................................................................................................63  
Recommended Audio Format Options ..........................................................................................64  
Audio Processing Setup............................................................................................66  
Speaker Configuration ...................................................................................................................66  
Other Audio Processing Settings...................................................................................................70  
Device Setup .............................................................................................................72  
Network Setup...........................................................................................................75  
REFERENCES...........................................................................79  
Useful Notes..............................................................................................................79  
Troubleshooting ........................................................................................................79  
Specifications............................................................................................................81  
User Manual Updates Online ....................................................................................81  
Language Code List ..................................................................................................82  
LIMITED WARRANTY...............................................................83  
OPPO Digital, Inc. Limited One Year Warranty ........................................................83  
iii  
Important Information  
CAUTION:  
CAUTION  
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY  
REPLACED. REPLACE ONLY WITH THE SAME OR  
EQUIVALENT TYPE.  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE. REFER  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS  
OR  
ADJUSTMENTS  
OR  
PERFORMANCE  
OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND DO NOT REPAIR  
SERVICING  
TO  
QUALIFIED  
SERVICE  
PERSONNEL.  
YOURSELF.  
REFER SERVICING TO QUALIFIED  
PERSONNEL.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated “dangerous voltage” within  
the product's enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
CLASS I LASER  
PRODUCT  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operation and maintenance  
(servicing)  
instruction  
in  
the  
literature  
accompanying the appliance.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
DANGEROUS HIGH VOLTAGES ARE  
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN  
THE CABINET.  
PERSONNEL ONLY.  
REFER SERVICING TO QUALIFIED  
This label is located on the laser protective housing inside the  
product.  
THE APPARATUS SHALL NOT BE EXPOSED TO  
DRIPPING OR SPLASHING AND THAT NO OBJECTS  
FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE  
PLACED ON THE APPARATUS.  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
where it exits from the apparatus.  
11) Only use attachments/accessories specified by the  
manufacturer.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the  
7) Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide  
blade or the third prong is provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or  
pinched, particularly at plug, receptacle, and the point  
apparatus. When a cart is used, use  
caution when moving the  
cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been  
dropped.  
15) Batteries (battery pack or batteries installed) shall not be  
exposed to excessive heat such as sunshine, fire or the  
like.  
1
I M P O R T A N T I N F O R M A T I O N  
Precautions  
Before connecting the AC power cord to the appliance,  
make sure the voltage designation of the appliance  
corresponds to the local electrical supply. If you are  
unsure of your power supply, contact your local power  
company. The acceptable power input range is AC ~  
100V-240V, 50/60Hz.  
The player is still receiving power from the AC power  
source as long as it is connected to the wall outlet,  
even if the player itself has been turned off.  
Unplug the power cord if you are not going to use the  
product for an extended period of time. Hold the power  
plug when unplugging. Do not pull on the cord.  
The main plug is used as the mechanism for cutting off  
power, therefore make sure it is easy to unplug.  
To ensure proper ventilation around this product, do not  
place this product on a sofa, bed or rug. When installing  
this product on a wall or bookshelf, you need to provide  
appropriate space.  
High temperature will lead to abnormal operation of this  
unit. Do not expose this unit or batteries to direct sunlight  
or near other heating objects.  
When moving the player from a cold location to a warm  
one, or vice versa, moisture may condense on the laser  
pickup unit inside the player. Should this occur, the  
player may not operate properly. In such a case please  
turn the unit on for 1-2 hours (without a disc) to facilitate  
moisture evaporation.  
FCC Statement  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
Any unauthorized changes or modifications to this equipment  
would void the user’s authority to operate this device.  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
Reorient or relocate the receiving antenna.  
Trademarks  
“Blu-ray Disc”, “Blu-ray 3D”, “BONUSVIEW” and “BD-  
Live” are trademarks of Blu-ray Disc Association.  
“BLOCKBUSTER” name, design and related marks are  
trademarks of Blockbuster Inc.  
Java and all Java-based trademarks and logos are  
trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
“Qdeo” and “QuietVideo” are trademarks of Marvell or its  
affiliates.  
Manufactured under license under U.S. Patent #’s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &  
other U.S. and worldwide patents issued & pending. DTS  
and the Symbol are registered trademarks, & DTS-HD,  
DTS-HD Master Audio | Essential and the DTS logos are  
trademarks of DTS, Inc. Product includes software. ©  
DTS, Inc. All Rights Reserved.  
DVD Logo is a trademark of DVD Format/Logo  
Licensing Corp., registered in the U.S., Japan and  
other countries.  
Super Audio CD, SACD and the SACD logo are joint  
trademarks of Sony Corporation and Philips Electronics  
N.V. Direct Stream Digital (DSD) is a trademark of  
Sony Corporation.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
“AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
Designed for Windows Media, Microsoft, HDCD, and  
the HDCD logo are trademarks or registered  
trademarks of Microsoft Corporation in the United  
States and/or other countries.  
“DivX” is a trademark of DivX, Inc.  
“480p/720p/1080i/1080p” up-converting arrow logo,  
“Source Direct” and “True 24p” logos are trademarks of  
OPPO Digital, Inc.  
All other trademarks are the properties of their respective  
owners.  
“Netflix” is a registered trademark of Netflix, Inc.  
2
I M P O R T A N T I N F O R M A T I O N  
Compatible Disc Types  
Type/Logo  
Features  
Manual Icon  
High Definition (HD) movie and music discs  
BD-ROM and BD-RE/BD-R discs in BDMV and BDAV mode, including 8cm  
discs (single layer) and DL discs.  
BD-Video  
- Discs supporting 3D Blu-ray contents playback. 3D-compatible  
displays and active shutter glasses are required for full 3D movie experience.  
- Discs supporting BONUSVIEW that allows Virtual  
packages or Picture-in-Picture functions to be used.  
- Discs supporting BD-Live (BD-ROM version 2 Profile 2) that provides  
interactive features when the player is connected to the Internet.  
DVD-Video  
DVD-Audio  
High quality movie and music discs  
Commercially released DVD discs, DVD+RW/DVD+R/DVD-RW/DVD-R in  
DVD-Video format, finalized.  
DVD-A  
SACD  
Multi-channel or stereo high resolution audio with compressed digital video or  
still pictures. Some DVD-Audio discs also contain a DVD-Video portion.  
Super Audio CD  
SACD: High resolution audio-only disc with stereo and/or multi-channel audio.  
Hybrid disc with both high resolution and CD-compatible layers.  
CD  
Compact Discs (CD) that contain audio tracks.  
AVCHD  
High-definition digital video camera format using efficient data compression  
coding technology.  
Discs that cannot be played  
BDs with cartridge  
DVD-RAMs  
HD DVDs  
Data portion of CD-Extras  
BD-Video/DVD-Video with a different region code  
Some DualDiscs: A DualDisc is a two sided disc with  
DVD on one side and digital audio on the other side. The  
digital audio side does not meet the technical  
specifications of the Compact Disc Digital Audio (CD-DA)  
format so playback is not guaranteed.  
Music discs encoded with copyright protection  
technologies: if the discs do not conform to the CD  
standard, they may not be playable on this player.  
Disc care and handling  
To keep the disc clean from scratches or fingerprints,  
handle the disc by its edge. Do not touch the recorded  
surface.  
Do not attach labels or stickers to discs as this may  
cause the disc to warp, become imbalanced or too thick,  
resulting in playback problems.  
Blu-ray Discs record data in very high density and the  
recorded layer is very close to the disc surface. For  
this reason, Blu-ray Discs are more sensitive to dust  
and fingerprints than DVD. Should you encounter  
playback problems and see dirty spots on the disc  
surface, clean the disc with a cleaning cloth. Wipe the  
disc from the center out along the radial direction. Do  
not wipe the disc in a circular motion.  
Avoid exposing the discs to direct sunlight or heat  
sources.  
Do not use the following discs:  
o
Discs with exposed adhesive from removed stickers  
or labels. The disc may get stuck inside the player.  
Warped or cracked discs.  
Irregularly shaped discs, such as heart or business  
card shapes.  
o
o
Do not use record cleaning sprays or solvents such as  
benzene, thinner and anti-static spray.  
3
I M P O R T A N T I N F O R M A T I O N  
Notes about BD-ROM compatibility  
Since the Blu-ray Disc specifications are new and evolving, some discs may not play properly depending on the disc type, version  
and encoding. It is possible that a Blu-ray disc manufactured after the player was manufactured uses certain new features of the  
Blu-ray Disc specifications. To ensure the best possible viewing experience, the player may need a firmware or software update  
from time to time. Please visit OPPO Digital’s web site www.oppodigital.com to check if updates are available.  
Copyright Protection  
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
Region management information  
This player is designed and manufactured to respond to the region management information. If the region number of a BD-Video  
or DVD disc does not correspond to the region number of this player, this player cannot play the disc.  
BD-Video: This player plays BD-Video with marks containing the region code A.  
DVD-Video: This player plays DVD-Video with marks containing the region code 1 and ALL.  
4
INSTALLATION  
Front Panel Controls  
1
2
3
4
5
6
7
8
9
1. POWER Button  
3. Main Display  
Window  
5. OPEN/CLOSE Button  
6. IR Sensor Window  
8. Playback Control and  
Navigation Buttons  
2. POWER Status  
Indicator  
4. Disc Tray  
9. USB 2.0 Port  
7. Auxiliary Display  
Window  
Front Panel Display Windows  
10  
14  
11  
8
13  
12  
6
5
7
2
4
1
3
9
16  
17  
15  
Main Display Window  
Auxiliary Display Window  
1. Title – When illuminated, the displayed time applies to  
a title  
10. Disc Type Indication – Indicates the currently playing disc  
type  
2. Group – When illuminated, the displayed time applies  
to a group  
11. HDMI – Indicates that one or more HDMI output is active  
12. Network – Indicates that an Ethernet cable is attached  
13. Wireless – Indicates a Wireless hotspot is connected  
14. Internet – Indicates the internet is being accessed  
15. Mute Icon – Indicates that the audio is muted  
3. Chapter – When illuminated, the displayed time applies  
to a chapter  
4. Track – When illuminated, the displayed time applies to  
a track  
16. Audio Channel Indication – Indicates whether the audio  
being played is 2ch stereo or multi-channel surround  
5. Total – When illuminated, the displayed time is the total  
play time  
17. Audio Type Indication – Indicates the type of audio tracks  
being played  
6. Remaining – When illuminated, the displayed time is  
the remaining play time  
7. Playback Status – Indicates playback status such as  
Play, Pause, Repeat, Repeat All, Random/Shuffle, and  
A-B Repeat  
8. Angle Icon – Indicates that the scene contains  
additional camera angle(s)  
9. Main Display – Text messages and numeric display  
5
I N S T A L L A T I O N  
Rear Panel Connectors  
6
7
8
1
2
4
5
9
10  
11  
3
1. Ethernet LAN Port  
6. USB 2.0 Port  
7. e-SATA Port  
9. Coaxial and Optical Digital Audio  
Output  
2. HDMI 2 Output (3D Compatible)  
3. Composite Video Output  
4. Component Video Output  
5. IR IN Port  
10. RS-232C Port  
8. HDMI 1 Output (3D Compatible)  
11. 7.1CH / 5.1CH / STEREO Audio  
Output  
In addition to the above connectors, the AC power inlet is also located on the rear panel. The inlet is the  
IEC60-320 C18 type. Only the included AC power cord or an approved power cord with an IEC60-320 C17  
type plug should be used.  
6
I N S T A L L A T I O N  
Remote Control  
Remote Control Buttons  
5. CLEAR: Clear numeric  
22. DIMMER: Dim the front  
19  
input  
panel display  
1
20  
21  
22  
23  
24  
6. TOP MENU: Show BD  
top menu or DVD title  
menu  
23. VOLUME +/-:  
Increase/Decrease  
volume  
2
3
7. ARROW and ENTER  
Buttons: Navigate menu  
selection  
24. MUTE: Mute audio  
25  
25. HOME: Go to Home  
Menu to select media  
source  
4
26  
8. SETUP: Enter the  
27  
28  
player Setup Menu  
26. PAGE UP/DOWN:  
Show the previous/next  
page  
5
6
9. COLOR Buttons:  
Function varies by  
content  
29  
27. GOTO: Play from a  
7
8
10. PLAY: Start playback  
11. STOP: Stop playback  
12. REV: Fast reverse play  
13. PREV: Skip to previous  
specified location  
28. DISPLAY: Show/hide  
30  
the On-Screen Display  
9
29. POP-UP MENU: Show  
BD pop-up menu or  
DVD menu  
10  
11  
31  
32  
33  
34  
35  
36  
37  
38  
14. SUBTITLE: Change  
12  
subtitle language  
13  
14  
15  
16  
17  
18  
30. RETURN: Return to the  
15. AUDIO: Change audio  
previous menu or mode  
language or channel  
31. PAUSE: Pause  
16. SAP: Turn on/off  
Secondary Audio  
Program  
playback  
32. FWD: Fast forward play  
33. NEXT: Skip to the next  
17. A-B REPLAY: Repeat  
play the selected  
section  
34. ANGLE: Change the  
camera angle  
18. RESOLUTION: Switch  
35. ZOOM: Zoom in/out  
output resolution  
and adjust aspect ratio  
1. POWER: Toggle power  
19. SOURCE: Select the  
internet media or  
36. PIP: Show/hide the  
STANDBY and ON  
Picture-in-Picture  
2. ON/OFF: Discrete on/off  
application source  
37. REPEAT: Repeat play  
power buttons  
20. OPEN: Open/close the  
38. LIGHT: Activate the  
back light for the  
3. PURE AUDIO: Turn  
disc tray  
off/on video  
21. P/N: Switch output TV  
system: NTSC, PAL or  
MULTI  
remote control  
4. NUMBER Buttons: Enter  
numeric values  
NOTE  
When a button is pressed but its function is invalid or unavailable at the moment, the TV  
screen displays a circle with a diagonal line:  
7
I N S T A L L A T I O N  
Back Side  
1. Index Finger Notch 1: When your index finger is  
placed at this notch while holding the remote control,  
your thumb is within easy reach of the navigation  
buttons (ARROW, ENTER, TOP MENU and POP-  
UP MENU).  
2. Index Finger Notch 2: When your index finger is  
placed at this notch while holding the remote control,  
your thumb is within easy reach of the playback  
control buttons (STOP, PLAY, PAUSE, PREV,  
NEXT, REV, FWD).  
3. Battery Cover: Remove to replace batteries or set  
remote code.  
4. Batteries: Use (2) size AA or LR6 batteries.  
5. Remote Code Switch: Adjust the position of the  
switch to set the remote control to use the indicated  
remote code (see details on page 9).  
1
2
4
5
3
With Battery Cover  
Battery Cover Removed  
Battery Installation  
1. Remove the battery  
compartment cover  
2. Insert batteries  
3. Replace the battery  
compartment cover  
Using the Remote Control  
When using the remote control, the front window of the remote control should be pointed to the infrared sensor  
on the front panel within an angle of ±30° and a range of about 26 ft.  
Within about 26ft  
8
I N S T A L L A T I O N  
Changing the Remote Code  
The remote control supports one of three remote codes. The default is “Code 1”. If you have other OPPO  
products placed close to the BDP-93, they may inadvertently respond to the BDP-93 remote control. In this  
case you can select a different remote code to avoid conflicts.  
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball  
point pen to flip the switch to one of the positions marked as “1”, “2”, or “3”. Close the battery compartment  
cover. Make sure that the BDP-93 player is turned on and the disc tray is ejected. Aim the remote control at  
the player. Press and hold the ENTER button for 5 seconds. The player will start using the new remote code.  
Battery Compartment  
Remote Code Switch  
CAUTIONS  
Never drop the remote control or expose it to moisture.  
Never expose the infrared remote sensor on the front panel to direct sunlight or other  
strong light sources.  
Remote may not operate consistently when batteries become low. Replace them if  
operation deteriorates.  
If the remote control will not be used for a long time, please remove the batteries.  
Use the batteries correctly to avoid possible leakage and corrosion. Do not leave the  
batteries exposed to direct sunlight or high temperature environment for a long  
period of time. Do not heat or expose to flame. Do not mix old and new batteries.  
Do not use batteries of different types at the same time. Do not attempt to recharge  
the batteries.  
If battery leakage occurs, do not touch the liquid with bare hands. Wipe out any  
liquid inside the battery compartment, and insert new batteries.  
9
I N S T A L L A T I O N  
Connecting to a Display (Recommended Methods)  
HDMI Connection to a single TV  
Rear Panel  
Video In  
Composite Video Cable  
(optional)  
HDMI In  
HDMI Cable (to HDMI 1 or 2)  
Method 1 – HDMI Connection Directly to a single TV  
If your TV has an HDMI (High-Definition Multimedia Interface) input, you can use the included  
HDMI cable to connect the player to the TV. This connection method delivers both video and  
audio in a pure digital format via a single cable. The HDMI video output of the player allows for  
the highest possible video quality and resolution.  
There are two HDMI output terminals (HDMI 1 and HDMI 2) on the rear panel of BDP-93, both  
of which can be connected to your TV. We recommend to use HDMI 1 since it benefits from the  
dedicated Marvell QDEO video processor, and set the “Primary Output” option in the setup  
menu to “HDMI 1” (please refer to page 52 for more details).  
You may connect the composite video cable to the TV for troubleshooting purposes, in the  
event that there is a problem with HDMI video. However it is not recommended to use the  
composite video as the primary method of video delivery to the TV, because it only produces a  
standard definition video signal and forfeits the advantage of high definition video.  
10  
I N S T A L L A T I O N  
HDMI Connection to Two (2) TVs  
Rear Panel  
HDMI Cables  
HDMI In  
Video In  
HDMI In  
Video In  
Composite Video Cable  
(optional)  
TV 2  
TV 1  
Method 2 –HDMI Connection Directly to two TVs  
The two HDMI outputs (HDMI 1 and HDMI 2) available on the rear panel of BDP-93 can be  
connected to two TVs at the same time, and each output can deliver the digital video and audio  
signals.  
We recommend to connect your main TV (the one with larger screen size or the one that you  
would watch more often) to HDMI 1 thus to benefit from the dedicated video processor, and set  
the “Primary Output” option in the setup menu to “HDMI 2” to make sure that the HDMI 2 can  
output high bit rate audio signals (please see more details on page 52).  
You may connect the composite video cable to one of your TVs for trouble-shooting purpose,  
please refer to page 10 for more details.  
11  
I N S T A L L A T I O N  
DVI Connection  
Rear Panel  
Video In  
DVI  
Composite Video Cable  
(optional)  
HDMI (from HDMI 1 or 2) - DVI Cable  
Audio  
DVI  
Audio Cable  
Method 2 – DVI Connection to TV  
If your TV has a DVI input that supports HDCP*, you can purchase an HDMI-DVI adapter cable  
to connect the player to the TV. This connection method delivers digital video to the TV without  
any signal degradation. The HDMI video output of the OPPO Blu-ray Disc player presents the  
highest possible video quality and resolution. We recommend to use HDMI 1 since it can  
benefit from the dedicated video processor, and set the “Primary Output” option in the setup  
menu to “HDMI 1” (please see more details on page 52).  
Please use the Red/White audio cables to connect the FL (Front Left) and FR (Front Right)  
terminals of the player to the TV. Make sure the audio cables are connected to the same input  
terminal group on the TV as the DVI input. Usually the input terminals are marked as “DVI  
Audio” or “PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter  
cable to connect the audio.  
You may connect the composite video cable to the TV for trouble-shooting purpose, please  
refer to page 10 for more details.  
*NOTE  
HDCP stands for High-bandwidth Digital Content Protection. The HDMI output of the OPPO  
Blu-ray Disc player uses HDCP to encrypt the digital audio and video content. The TV needs  
to support HDCP so it can decrypt the content and properly display it.  
12  
I N S T A L L A T I O N  
Component Video Connection  
Rear Panel  
Component  
Video Cables  
Component  
Video  
Y
Pb/Cb  
Pr/Cr  
Audio Cable  
Audio  
Method 3 – Component Video Connection to TV  
If your TV has no digital video input but has component video inputs, please use a set of  
component video cables to connect the component video output of the player to the TV, and  
remember to set the “Primary Output” option in the setup menu to “Analog” (please see more  
details on page 52). The connectors are color coded, so please make sure the cable  
connections match on both ends. The component video connection will produce a very clear  
picture with high color accuracy.  
Please use the Red/White audio cables to connect the FL (Front Left) and FR (Front Right)  
terminals on the rear panel of the player to the TV. Make sure the audio cables are connected  
to the same input terminal group on the TV as the chosen component video input.  
When the “Primary Output” option in the “Video Setup” section of the Setup menu is set to  
HDMI 1” or “HDMI 2” (see page 52 for details), the component video connection will not output  
video when playing a Blu-ray Disc with 1080p 24Hz content, or will only output video with a low  
resolution (480i/576i) when playing a DVD. This is not a malfunction. You must set “Primary  
Output” to “Analog” in order to properly use the component video connection.  
When playing a Blu-ray Disc, video resolution over the component output can be up to 1080i.  
1080p content will be interlaced into 1080i signal for the component output.  
Video up-conversion over the component output is only available for unencrypted discs such as  
home video and consumer-created contents. Most commercially pressed DVD discs are CSS-  
encrypted and will be limited to 480i/480p resolution. This restriction applies to the component  
output only. The HDMI output is protected with HDCP and has no such restriction.  
You may connect the composite video cable to the TV for trouble-shooting purpose, please  
refer to page 10 for more details.  
13  
I N S T A L L A T I O N  
Connecting to an Audio System  
Connecting to a Receiver/Amplifier with HDMI Input/Output  
Rear Panel  
HDMI Cable (to HDMI 1 or 2)  
HDMI In  
HDMI Out  
HDMI In  
HDMI Cable  
AUDIO/VIDEO MULTI-CHANNEL RECEIVER  
Method 4 – HDMI Connection to Receiver and TV  
If you have an HDMI-capable receiver that can support HDMI audio, you can simply run an  
HDMI cable from the player to your receiver and enable HDMI audio on the receiver (see your  
receiver’s owners’ manual for more information). The receiver usually has an HDMI output that  
you can connect to your TV to pass the video signal.  
Either of the HDMI output terminals (HDMI 1 and/or HDMI 2) on the rear panel of the BDP-93  
can be connected to your receiver. Preference should be given to HDMI 1 for video since it’s the  
only output on the machine to benefit from the superior Marvell QDEO video processing solution,  
and set the “Primary Output” option in the setup menu to “HDMI 1” (please refer to page 52).  
NOTE  
HDMI is a single cable that can transport both audio AND video from your player to your  
display. Be aware, however, that HDMI is an evolving standard, and there could be  
compatibility issues. A receiver that supports audio input over HDMI is required. Some  
receivers offer HDMI ports solely for video switching. If your receiver does not have audio  
input capability, please read the following sections regarding other connection methods.  
In order to play multi-channel audio for all formats, the receiver must support HDMI v1.1 or  
later. For Blu-ray Disc, a receiver that supports HDMI v1.3 with decoding capability for Dolby  
TrueHD and DTS-HD Master Audio is preferred. Please check the specifications of your  
receiver to ensure that it meets the requirements.  
The HDMI outputs on the BDP-93 are HDMI v1.4, which is compatible with HDMI v1.3 and  
earlier versions.  
14  
I N S T A L L A T I O N  
Connecting to a Receiver/Amplifier with 7.1ch/5.1ch Audio Input  
Rear Panel  
Audio Interconnect Cables  
L
L
L
CENTER  
R
R
R
FRONT  
SURROUND SUBWOOFER S. BACK  
AUDIO/VIDEO MULTI-CHANNEL RECEIVER  
Receiver/Amplifier with 7.1ch Audio Input  
Method 5 – 7.1ch Analog Audio Connection  
Please use 8 RCA-style audio interconnect cables to connect the FL (Front Left), FR (Front  
Right), SL (Surround Left), SR (Surround Right), C (Center), SW (SubWoofer), SBL (Surround  
Back Left) and SBR (Surround Back Right) analog output terminals of the OPPO Blu-ray Disc  
player to the corresponding multi-channel analog audio input jacks of your A/V receiver or  
amplifier.  
If the A/V receiver or amplifier only has 5.1ch audio input, do not connect the SBL (Surround  
Back Left) and SBR (Surround Back Right) terminals.  
15  
I N S T A L L A T I O N  
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder  
Connect one of these cables:  
Optical Digital Audio Cable  
Optical In  
Coaxial Digital Audio Cable  
Coaxial In  
AUDIO/VIDEO MULTI-CHANNEL RECEIVER  
Receiver/Amplifier with Dolby Digital or DTS Decoder  
Method 6 – Digital Audio Connection  
Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF  
optical digital audio cable to connect one of the digital audio outputs to the corresponding input  
terminal on your A/V receiver. For the detailed setup of coaxial/optical signals, please refer to  
page 61.  
NOTE  
Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus,  
Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent  
through the coaxial or optical digital audio output. A reduced resolution version of the  
same audio track will be output instead. To listen to high resolution audio formats in  
their best quality, please use the HDMI connection if you have a receiver that handles  
HDMI audio (see page 14) or use the multi-channel analog outputs if you do not (see  
page 15).  
Due to copyright restrictions, SACD audio cannot be sent through the coaxial or  
optical digital audio output. To listen to SACD, please use the HDMI or analog audio  
connections.  
Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD-  
Audio discs cannot be sent through the coaxial or optical digital audio output. To listen  
to DVD-Audio in full resolution, please use the HDMI or analog audio connections.  
16  
I N S T A L L A T I O N  
Connecting to a Stereo Audio System  
Rear Panel  
L
Audio Interconnect Cable  
R
AUDIO IN  
AUDIO/VIDEO  
M
U
T
LI-CHANNEL  
RECEIVER  
Stereo or Surround Audio System  
Method 7 – Stereo Analog Audio Connection  
If your audio system offers only stereo audio inputs, or if you would like to connect a  
dedicated stereo audio system in addition to the surround audio system which is already  
connected to the HDMI, coaxial or optical output, you can connect the dedicated stereo  
audio system to the FL (Front Left) and FR (Front Right) terminals of the player.  
NOTE  
Depending on the capability of your audio system, you may set up your Blu-ray Disc  
player with one of the following configurations: if the audio system does not have  
surround speakers, please set the down mix mode to “Stereo”; if the audio system has  
surround speakers and Dolby Pro Logic or similar surround audio decoding capability,  
please set the down mix mode to “LT/RT”. (Please refer to page 67 for details.)  
17  
I N S T A L L A T I O N  
Connecting to a Display and Audio System using Dual HDMI  
Method 8 – Dual HDMI Connection  
BDP-93 provides a Dual HDMI connection to make sure you can enjoy the highest possible  
video quality and resolution, in addition to the high bit rate audio content. You can use the  
included HDMI cable to connect the HDMI 1 output to your HDTV and use another HDMI cable  
(not included) to connect the HDMI 2 output to your receiver, also set the “Primary Output”  
option in the Video Setup section of the Setup menu to “HDMI 1” (see page 52 for details). In  
this way you can utilize the dedicated video processor available for HDMI 1 output, and allow  
your receiver which has no HDMI 1.4 inputs to work without any loss on the digital audio signals.  
Keep in mind that while Dual HDMI connection is only a recommended method, in fact, both of  
the HDMI outputs (HDMI 1 and 2) on the BDP-93 can send out digital audio and video signals at  
the same time, and can be connected to your TV or receiver/amplifier separately (see page 10  
and 14 for details).  
NOTE  
Please refer to the notes of HDMI connection available on page 14.  
If your receiver does not have audio input capability, please try alternate connection  
methods discussed on pages 15 to 17.  
18  
I N S T A L L A T I O N  
Connecting to the Internet  
The OPPO BDP-93 Blu-Ray Disc Player has significantly improved its internet exploration capabilities  
compared to its predecessors. Currently it supports both Netflix and Blockbuster for instant online media  
streaming, as well as in-home network media sharing via My Network which is functionally equivalent to DLNA.  
Additional network applications may be added with future firmware updates.  
The BDP-93 also supports the BD-Live feature offered on some Blu-ray Disc titles. BD-Live offers extra  
downloadable content and additional online interactive programs. Content available on BD-Live vary by discs  
and studios, and may include additional subtitles, commentaries, movie trailers, games, or online chat.  
Connecting the player to the Internet will also allow the player to obtain firmware updates via the Internet.  
(See pages 4 and 72 for more information regarding firmware updates.)  
In order to utilize the BD-Live feature or update firmware via the Internet, the player needs to be connected to  
a broadband Internet connection. It is not necessary to connect to the Internet if you do not intend to use the  
network streaming, BD-Live and online firmware updating functionality.  
The BDP-93 provides two network connection methods: through Ethernet cable or through the external  
wireless adaptor included with the player. For the fastest and most stable network connection, we  
recommend using Ethernet cable whenever it is possible.  
Internet connection through Ethernet cable  
Rear Panel  
Broadband Internet  
Connection  
Network Cable  
(Ethernet)  
Internet  
WAN  
1
2
LAN  
3
4
Broadband Router/Modem  
Plug one end of a network cable (Category 5/5E straight Ethernet cable) into the LAN port on  
the back of the OPPO Blu-ray Disc player.  
Plug the other end of the network cable into a LAN port on the broadband router or modem.  
After physically connecting the player to a broadband Internet connection, some network  
configuration may be required. Please refer to the Network Setup section on page 75 for  
details.  
Refer to the operating instructions supplied with the broadband router or modem, or contact the  
Internet service provider for questions related to setting up the router or modem.  
19  
I N S T A L L A T I O N  
NOTE  
Only connect the LAN port of the player to an Ethernet port that supports 10BASE-T or  
100BASE-TX. Connecting to any other ports or jacks, such as a phone jack, can  
damage the player.  
Streaming services such as Netflix and Blockbuster may require membership and may  
also be limited to service in the US only.  
Internet connection through wireless adaptor  
Rear Panel  
USB IN  
Wireless Adaptor  
Broadband Internet  
Connection  
Internet  
Internet  
1
2
LAN  
3
4
WiFi  
Wireless Router/Access Point  
The wireless adaptor included in the BDP-93 package has been pre-configured to work with  
BDP-93 player. It is compatible with 802.11b/g/n 2.4GHz wireless networks.  
Make sure the broadband Internet connection is available and the Wi-Fi function on your  
wireless router or access point has been turned on, then plug the adaptor into one of the two  
USB2.0 ports available on your BDP-93.  
After the physical connection, some network configuration is required. Please refer to the  
Network Setup section on page 75 for details.  
A 6-foot USB extension cable is also included in the package. Connect it between the USB port  
on the player and your wireless adaptor if needed.  
20  
I N S T A L L A T I O N  
Custom Installation  
External IR (Infrared Remote) Installation  
The OPPO BDP-93 Blu-Ray Disc Player features an IR IN port on its back panel. If the player is to be  
installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom  
home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port. Place the  
sensor head at a location where there is direct line-of-sight to ensure reliable operation.  
Rear Panel  
3.5mm Mono Cable  
External IR Remote Sensor  
NOTE  
When an external IR sensor is plugged in, the original IR sensor window on the front  
panel will be disabled.  
OPPO cannot guarantee that the IR IN port will be compatible with devices that are  
not manufactured by OPPO.  
The IR port on the BDP-93 is NOT compatible with the prior external IR Remote  
Sensor (IR-ES1) which is used with BDP-83.  
Connecting the IR IN port to an incompatible device may result in damage to the  
connected device or the player.  
Please contact OPPO customer support if you plan to integrate the player into an IR  
distribution system. Customer support can provide recommendations on how to  
properly connect the control signals.  
IR IN Signal Identifications  
3.5mm Mono Plug  
Tip: IR carrier signal  
Sleeve: Ground  
RS232 Control  
The BDP-93 has an RS232 control port and can be integrated into most custom home theater control systems.  
Please ask your custom installer to contact OPPO for the RS232 control protocol.  
21  
I N S T A L L A T I O N  
Setting Up the Player - Easy Setup Wizard  
Access the Easy Setup Wizard  
When the player is turned on for the first time, an Easy Setup Wizard screen will appear. It is a series of  
guided instructions designed to configure the basic settings for the player.  
To start the Easy Setup Wizard, please follow these steps:  
1) Turn on the TV.  
2) Turn on the player.  
3) Switch the input selection on your TV so that the TV displays the signal from the player. You  
should see the first step of the Easy Setup Wizard.  
If the Easy Setup Wizard has previously been completed or canceled, it will no longer initiate when you turn on  
the player. Instead, you will see the background screen with the OPPO and Blu-Ray Disc logos. To access  
Easy Setup Wizard, please press the SETUP button on the remote control, select Device Setup, then Reset  
Factory Default. Select OK” to confirm loading  
the factory default settings. Once the factory  
default settings are loaded the Easy Setup Wizard  
Easy Setup  
will appear.  
Step: 1/6  
The first step of the Easy Setup Wizard allows you  
to skip the entire wizard. If you are familiar with  
setting up audio/video equipment and would like to  
The Easy Setup Wizard will help you configure the  
basic settings for this player. More detailed settings  
can be accessed at the Setup Menu at any time after  
finishing or exiting the wizard.  
customize the player settings using its Setup Menu,  
you may use the LEFT/RIGHT ARROW buttons to  
Press OK to initiate the Easy Setup Wizard, press  
Cancel to exit this Wizard immediately.  
select the “Cancel” option, then press the ENTER  
key to exit the Easy Setup Wizard. Otherwise, to  
continue with the Easy Setup Wizard, select the  
OK” option and press the ENTER key.  
Choose the Primary Video Output  
The player can output video through its HDMI and  
Easy Setup  
component output terminals. (Composite video  
output is also available but not recommended.) By  
setting the “Primary Video Output” option, the  
player can optimize video output of the selected  
terminal. The choices are “HDMI 1”, “HDMI 2” and  
Analog”. If you connect the player to the TV using  
an HDMI cable (see Method 1 on page 10, Method  
2 on page 11, Method 4 on page 14, or Method 8 on  
page 18), please select “HDMI 1” or “HDMI 2”  
correspondingly. If you connect the player to the TV  
using component video cables (see Method 3 on  
page 13), please select “Analog”.  
HDMI 1  
HDMI 2  
Step: 2/6  
Choose the primary video output that you use.  
Better performance will be provided over an HDMI  
connection.  
Analog  
Previous  
Next  
Enter  
Please note: The best performance will be provided over the HDMI connection. Between the two HDMI  
outputs, HDMI 1 should be given priority for use since it benefits from the superior Marvell QDEO video  
processing solution.  
To make your selection, use the UP/DOWN ARROW buttons to highlight the choice, and then press the  
ENTER button to go to the next step.  
22  
I N S T A L L A T I O N  
Select the Best Output Resolution  
One of the major advantages of the OPPO Blu-Ray Disc Player is its ability to play high-definition Blu-Ray  
video and also up-convert standard definition video stored on DVD discs to high definition. The sophisticated  
video processor inside the player ensures that the video will have the best possible color, detail and motion.  
The player offers several standard and high definition video output resolutions. To get the best visual result, it  
is important to select an output resolution that best matches your TV or display device.  
The rule of thumb when selecting an output resolution is to match the “native resolution” of your TV or display  
device as closely as possible. The “native resolution” is the resolution of the actual display component in the  
TV, such as the Plasma panel, LCD panel, or DLP™ chip. The TV may accept input signals with lower or  
higher resolutions than its native resolution. In such cases the electronics in the TV will up-scale or down-  
scale the video to fit its display component. Unfortunately many TVs on the market only do an average job  
scaling the video. On the other hand, if you set the OPPO Blu-ray Disc Player to output a resolution that  
matches or is very close to the native resolution of the TV, you are more likely to get a great picture.  
For the latest generation of 1080p, “Full HD” or “True HD” displays, the best output resolution will naturally be  
1080p. (A few early model 1080p displays do not accept 1080p signal. For these displays the best output  
resolution to use is 1080i.) For all other digital televisions this will likely be 720p. For CRT tube or rear  
projection televisions this will likely be 1080i. For EDTV displays (very rare if they have HDMI or DVI) this will  
be 480p (NTSC) or 576p (PAL). These are general recommendations that work for most users, but there can  
be exceptions. Advanced users may want to try all supported resolutions and choose the one that provides  
the best visual result.  
The OPPO Blu-ray Disc Player supports a special “Source Direct” output resolution on its HDMI output. This  
resolution is recommended for use with external video processors or high-end TVs. In “Source Direct” mode,  
the player works as a “transport”. It decodes video from the discs and then sends the raw video signal in its  
native resolution and format, without extra processing, to the external video processor or TV. The actual  
output resolution varies by content:  
Content  
Source Direct Output Resolution  
NTSC DVD  
480i  
PAL DVD  
576i  
Most Blu-ray Movies (film-source)  
Most Blu-ray TV shows or Concerts  
(video-source)  
1080p 23.976Hz or 1080p 24Hz  
1080i  
SACD and DVD-Audio  
1080i  
Depending on your selection of “Primary Video  
Output”, the available output resolution selections  
will differ. For the HDMI 1 and HDMI 2 output, the  
following output resolutions are available: Auto,  
1080p, 1080i, 720p, 480p/576p, 480i/576i, and  
Source Direct. If Auto” is selected, the player will  
determine its output resolution based on the best  
signal resolution that the TV can display.  
Easy Setup  
Auto  
Step: 3/6  
1080p  
Choose the output resolution which best matches  
1080i  
your TV.  
720p  
Change will be applied immediately. You will have  
480p/576p  
15 seconds to either save the new setting or  
rollback to the previous output resolution.  
480i/576i  
Source Direct  
For the Analog (component) output, the following  
output resolutions are available: 1080p, 1080i,  
720p, 480p/576p and 480i/576i. Please note  
1080p only applies to HDMI output, if it is selected  
for component video outputs, it will automatically be  
Previous  
Next  
Enter  
down-scaled to 1080i. Please refer to the specifications of your TV to find the best resolution to use.  
23  
I N S T A L L A T I O N  
Press the UP/DOWN ARROW buttons to select the  
desired output resolution, then press the ENTER  
button. The player will apply the selected output  
resolution and ask you to confirm the selection. If  
your TV supports the selected resolution, you will  
see a dialog box with a count-down clock. Use the  
LEFT ARROW button to highlight the “OK” option  
and press the ENTER button to save the resolution  
setting. If your TV does not support the selected  
resolution, you may see a black screen or an error  
message. In this case please wait for 15 seconds  
and the Easy Setup screen will reappear. Select a  
different resolution that your TV can support.  
Confirm Output Resolution  
The output resolution has been changed.  
15s  
Select OK to save the new setting. Select  
Cancel to rollback to the previous output  
resolution.  
Enter  
NOTE  
If you cannot get a picture using the HDMI or Analog (component) output, please  
connect the player to the TV using the composite video output, and then use the Setup  
Menu to adjust the player settings.  
Video up-conversion over the Analog (component) output is only available for  
unencrypted discs such as home video and consumer-created contents. Most  
commercially pressed DVD discs are CSS-encrypted and will be limited to 480i/480p  
resolution. This restriction applies to the component output only. The HDMI output is  
protected with HDCP and has no such restriction.  
Determine the Display Aspect Ratio  
Standard Definition, or 4:3 TV  
Wide screen, or 16:9 TV  
The aspect ratio is the proportional ratio of a TV screen’s width and height. Older television sets generally  
have a 4:3 aspect ratio – the width is 4/3 (or 1.33) times the height. Newer wide screen television sets have a  
16:9 aspect ratio – the width is 16/9 (or 1.78) times the height. For best performance, the video output of your  
player needs to match the screen aspect ratio of your TV. Since almost all Blu-ray Discs and many DVD discs  
are released in the wide screen format, it is highly recommended that you use a wide screen TV with the  
player.  
The Aspect Ratio selections are 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Wide and 16:9 Wide/Auto. Depending  
on your selection and the video format recorded on the discs, image appearance on the TV screen can be  
one of the following:  
24  
I N S T A L L A T I O N  
TV Screen Appearance  
Pan & Scan Wide  
4:3  
16:9  
Original Content  
Letterbox  
Wide/Auto  
4:3  
16:9  
If you have a 4:3 or standard definition screen, select one of these options:  
4:3 Letterbox – 4:3 TV Letterbox. Choose when the display is 4:3. Widescreen image is  
displayed in “letterbox” format with black borders on top and bottom (preferred).  
4:3 Pan & Scan – 4:3 TV Pan and Scan. Choose when the display is 4:3. Both sides of a  
widescreen image are clipped (you lose about 30% of the picture).  
If you have a widescreen (16:9) display, select one of these options:  
16:9 Wide – 16:9 (widescreen) sources will be displayed in their native aspect ratio, and 4:3  
sources will be horizontally stretched.  
16:9 Wide/Auto – 16:9 (widescreen) as well as 4:3 sources will be displayed in their native  
aspect ratio. Please note that in this mode 4:3 sources will be displayed with black borders on  
both left and right sides to maintain the correct 4:3 aspect ratio.  
Press the UP/DOWN ARROW buttons to select the  
Easy Setup  
proper aspect ratio for your TV, then press the  
ENTER button.  
Step: 4/6  
Choose the desired Aspect Ratio for your TV.  
4:3 Letterbox  
4:3 Pan & Scan  
4:3 Letterbox: For 4:3 TV. Wide screen content  
will be displayed in a letterbox.  
4:3 Pan & Scan: For 4:3 TV. Wide screen  
content may be cropped on the sides.  
16:9 Wide: For 16:9 TV.  
16:9 Wide  
16:9 Wide/Auto  
16:9 Wide/Auto: For 16:9 TV. 4:3 content will be  
displayed with side borders.  
Previous  
Enter Next  
25  
I N S T A L L A T I O N  
Select the Audio Setting  
The Blu-ray Disc format brings not only high resolution video, but also high bit rate audio such as Dolby Digital  
Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio. Blu-ray Discs may also include  
additional audio features such as menu click sound and Secondary Audio Program (SAP – audio associated  
with the secondary video in Picture-in-Picture mode). Depending on the user preferences and other  
audio/video equipment connected to the player, the audio settings need to be adjusted to achieve the best  
result. The Easy Setup Wizard offers two basic selections to get you started.  
The “Compatible” setting configures audio output  
Easy Setup  
in a way that is generally compatible with all types  
of equipment and content. If you connect the player  
to a television directly, or to a receiver with an HDMI  
1.1/1.2 or optical/coaxial input, selecting the  
Compatible” setting is recommended. When  
menu click sound and Secondary Audio Program  
are presented in the content, those will be mixed  
into the audio output.  
Step: 5/6  
Select the audio setting.  
Compatible  
Advanced  
Compatible: For televisions and receivers with  
HDMI 1.1/1.2 or Optical/Coaxial connections.  
Advanced: For receivers with HDMI 1.3 or higher  
version only. Secondary audio program is turned  
off by default.  
The “Advanced” setting configures audio output to  
send the original main audio content to a connected  
receiver for decoding and reproducing. It requires a  
receiver capable of decoding all high bit rate audio  
Audio settings can be further customized in the setup menu.  
Previous  
Next  
Enter  
formats. If you connect the player to a receiver supporting HDMI 1.3 or higher version and high bit rate audio  
formats, selecting the “Advanced” setting is recommended. Menu click sound and Secondary Audio Program  
are turned off by default.  
Press the UP/DOWN ARROW buttons to select one of the audio setting choices, and then press the ENTER  
button. The two basic audio setting choices may not cover all situations. You can further customize the audio  
settings using the player’s Setup Menu.  
Complete the Easy Setup Wizard  
Once you have selected the audio setting, the initial  
Easy Setup  
Easy Setup Wizard is completed.  
Press the ENTER button to close the Easy Setup  
Wizard. Your player is now ready for use. You will  
see a background screen with an OPPO and Blu-  
ray Disc logo.  
Step: 6/6  
Easy Setup Wizard completed.  
Press the Enter button to exit.  
Please follow the rest of the User Manual for basic  
and advanced operations. Enjoy your new OPPO  
Blu-ray Disc Player!  
Previous  
Finish  
Enter  
26  
BASIC OPERATIONS  
Disc Playback  
SACD  
DVD-A  
1Press the POWER button to turn on the player.  
2Press the OPEN/CLOSE (OPEN) button to eject the disc tray.  
3Place the disc with the label side facing up and the recorded  
side facing down.  
OPEN  
POWER  
4Press the OPEN/CLOSE (OPEN) button again to retract the  
tray.  
5The player will read the disc information and starts playback.  
6Depending on the content of the disc, a menu or navigation  
screen may appear. Please use the navigation ARROW and  
SELECT buttons to select the content to play.  
7To stop playback, press the STOP button.  
8To turn off the player, press the POWER button.  
STOP  
PLAY  
NOTE  
During DVD and some Blu-ray Disc playback, pressing the STOP button for the first time  
brings the player to a pre-stop mode. You can resume playback from the stopped point  
by pressing the PLAY button. This pre-stop mode allows you to change the player  
settings and then resume playback. To completely stop playback, press the STOP  
button twice.  
Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode.  
Pressing the STOP button during playback of such discs will completely stop the disc.  
Pressing the PLAY button once the disc is stopped will restart it from the very beginning.  
This unit consumes a tiny amount of power even when it is turned off to STANDBY  
mode. If it is not to be used for a long time, unplug it from the household AC outlet.  
SACD  
DVD-A  
Fast Playback  
You may fast forward or reverse during playback.  
REV  
FWD  
1. Press the FWD button on the remote control and the player  
starts fast forward playback. Each press of the FWD button  
switches the playback speed in the following sequence:  
1
2
5
4
3
27  
B A S I C O P E R A T I O N S  
2. Press the REV button on the remote control and the player starts fast reverse playback. Each  
press of the REV button switches the playback speed in the following sequence:  
1
2
5
4
3
NOTE  
Certain Blu-ray Discs utilizing the BD-Java technology may have their own fast  
forwarding and reversing control. The actual speed varies by disc, and a progress scale  
may be displayed by the disc.  
SACD  
DVD-A  
Pause and Frame-by-Frame  
1. During playback, press the PAUSE button to temporarily pause  
the program. In this mode, a PAUSE icon will appear on the TV  
screen.  
2. While a DVD or Blu-ray Disc is paused, press the PREV or  
NEXT button to reverse or advance the video frame-by-frame.  
3. Press the PLAY button to resume normal playback.  
PLAY  
PREV  
PAUSE  
NEXT  
NOTE  
If the screen saver is set to “On” or “Energy Saver” (please refer to page 55 for details), after  
pausing for 3 minutes the player will activate the screen saver.  
Slow Playback  
To play the video in slow-motion, please use the following steps.  
1. Press the PAUSE button on the remote control to pause the  
playback first.  
2. Press the FWD button to select a forward slow playback speed.  
Each press of the FWD button switches the playback speed in  
the following sequence:  
PLAY  
REV  
PAUSE  
FWD  
1/16  
1/8  
1/2  
1/4  
3. Press the REV button to select a reverse slow playback speed. Each press of the REV button  
switches the playback speed in the following sequence:  
1/16  
1/8  
1/2  
1/4  
4. To exit the slow playback mode, press the PLAY button.  
NOTE  
Certain Blu-ray Discs utilizing the BD-Java technology may not support slow playback.  
28  
B A S I C O P E R A T I O N S  
Blu-ray Disc Menu Playback  
1. Blu-ray Discs usually contain a Top Menu and a Pop-up  
Menu. The Top Menu normally appears at the beginning of  
the playback, after the previews and copyright messages.  
The Pop-up Menu can be accessed during the movie  
without interrupting playback.  
POP-UP  
MENU  
TOP  
MENU  
ARROW  
BUTTONS  
ENTER  
2. During playback, press the POP-UP MENU button to  
access the Pop-up Menu. Press the TOP MENU button to  
access the Top Menu.  
COLOR  
BUTTONS  
3. Navigate the menu using the ARROW buttons, and then  
press the ENTER button to make the selection.  
4. Some menus make use of the COLOR buttons. You can  
select menu functions by pressing the corresponding  
COLOR button on the remote control.  
DVD-A  
DVD Menu Playback  
1. Some DVD discs contain title menu or chapter menu  
functions.  
2. During playback, press the TOP MENU button to return to  
the disc title menu. Press the POP-UP MENU button to  
display the chapter menu. Depending on the disc, one or  
both menus may not exist.  
POP-UP  
MENU  
(MENU)  
TOP  
MENU  
(TITLE)  
ARROW  
BUTTONS  
ENTER  
RETURN  
3. Navigate the menu using the ARROW buttons, and then  
press the ENTER button to make the selection.  
4. Press the RETURN button to return to the previous menu.  
The return location varies by disc.  
SACD  
DVD-A  
On-Screen Display  
1. During the playback of a DVD or Blu-ray Disc, press the DISPLAY  
button on the remote control to show status information; For CD  
and SACD, the status information is shown automatically.  
2. While the status information is shown, press the PAGE  
UP/DOWN buttons to scroll through several display formats. The  
playback time information displayed on the front panel changes  
together with the on-screen display.  
PAGE  
UP/DOWN  
DISPLAY  
3. Press the DISPLAY button again to hide the on-screen display.  
The playback time information display on the front panel will  
remain in the selected format.  
The following display formats are available:  
DVD and Blu-ray Disc:  
- Title elapsed time  
- Chapter elapsed time  
- Chapter remaining time  
- Title remaining time  
CD and SACD:  
- Track elapsed time  
- Track remaining time  
- Disc elapsed time  
- Disc remaining time  
29  
B A S I C O P E R A T I O N S  
In addition to the playback time, the on-screen display may also contain the following information about  
the content currently playing:  
Playback status: an icon indicating play, pause, and fast forward/reverse status.  
Bit rate meter: an indication of the bit rate of the audio and video stream.  
Current and total title numbers. (DVD and Blu-ray Discs)  
Current and total chapter numbers of the current title. (DVD and Blu-ray Discs)  
Current and total tracks. (CD and SACD)  
Audio information: current and total available number of audio tracks, language, format, and  
channels.  
Subtitle information: current and total available number of subtitle tracks and language.  
Video format information: encoding type, frame rate and original aspect ratio.  
SACD  
DVD-A  
Volume Control  
1. On the BDP-93, the volume control only affects the analog  
audio output. It does NOT apply to digital audio output (HDMI,  
Coaxial and Optical) either in raw bitstream format or in  
LPCM format.  
2. The VOL +/- buttons on the player remote control is provided  
as an alternative way of controlling the audio volume. It is  
recommended that you use this control to make the audio  
volume from the player the same as from other sources, such  
as TV programs or a VCR.  
VOL +  
VOL -  
Press the VOL – button to decrease the volume.  
Press the VOL + button to increase the volume.  
SACD  
DVD-A  
Mute  
1. Press the MUTE button on the remote control during content  
playback to turn off audio output. The TV screen displays a  
mute icon. The front panel MUTE indicator will also light up.  
2. Press the MUTE button again to resume audio output.  
MUTE  
NOTE  
Check the MUTE status on the front panel display of the player when there is no audio  
output. You may also press the MUTE button to verify the MUTE status.  
SACD  
DVD-A  
Audio Language/Track Selection  
1. To select the audio language or track, press the AUDIO button on  
the remote control during playback.  
2. Repeat pressing the AUDIO button or use the UP/DOWN  
ARROW buttons to choose from all available language or audio  
tracks.  
AUDIO  
30  
B A S I C O P E R A T I O N S  
NOTE  
Availability of languages and audio channels varies by disc. Some DVD-Audio discs allow  
audio track selection with the AUDIO button, while others require the user to select from the  
audio setup menu of the disc. When playing an SACD with both multi-channel and stereo  
contents, the AUDIO button can be used to switch between the two formats.  
Subtitle Selection  
1. When playing a DVD, Blu-ray Disc or other video programs  
recorded with subtitles, press the SUBTITLE button on the  
remote control to select the desired subtitle.  
SUBTITLE  
2. Repeat pressing the SUBTITLE button or use the UP/DOWN  
ARROW buttons to choose from all available subtitles.  
3. To turn off subtitles, select “Off” from the list.  
Angle Selection  
1. When playing a DVD or Blu-ray Disc, an angle mark will be  
displayed on the screen when the player detects scenes  
recorded with multiple angles:  
ANGLE  
The angle mark is also presented on the front panel display.  
2. Press the ANGLE button on the remote control to select the desired playing angle.  
3. To resume normal playback, repeat pressing the ANGLE button until the default angle is  
displayed.  
NOTE  
This function is available only when the discs are recorded with multiple angles.  
The angle mark on the screen can be turned off using the Setup Menu of the player. (see  
page 54)  
Picture-in-Picture and Secondary Audio  
1. Certain Blu-ray Discs contain secondary video (Picture-in-  
Picture, or PIP) and secondary audio. This feature is often  
called BONUSVIEW. When such a disc is played, a  
Picture-in-Picture mark (PIP Mark) and a Secondary Audio  
Program mark (SAP Mark) may be displayed on the screen  
to alert you to the availability of the secondary audio/video  
content.  
SAP  
PIP  
31  
B A S I C O P E R A T I O N S  
2. The disc menu usually features interactive controls to turn on/off the Picture-in-Picture video  
and Secondary Audio Program. Please use those controls to select the desired secondary  
audio/video content.  
3. There is a PIP button on the remote control. If the disc menu does not offer interactive Picture-  
in-Picture controls, please use this button to turn on/off Picture-in-Picture or select from multiple  
secondary video programs.  
4. There is also a SAP button on the remote control. If the disc menu does not offer interactive  
secondary audio controls, please use this button to turn on/off Secondary Audio Program or  
select from multiple secondary audio tracks. Secondary Audio Programs are generally only  
available when Picture-in-Picture is shown.  
NOTE  
This function is available only when the discs are recorded with secondary video and  
audio programs.  
Some discs may not play back according to the PIP and SAP buttons. Certain discs can  
ignore or override the remote control commands.  
The PIP and SAP Marks on the screen can be turned off using the Setup Menu of the  
player (See page 55).  
BD-Live  
Some Blu-ray Disc titles are released with the BD-Live feature. BD-Live offers extra  
downloadable contents and additional online interactive programs. The available BD-Live  
contents vary by discs and studios, and may include additional subtitles, commentaries,  
preview trailers, games, and online chat. The player needs to be connected to the Internet in order to play  
BD-Live contents (See page 19).  
Depending on how the studios organize their BD-Live contents, some Blu-ray Discs may start downloading  
BD-Live contents when playback starts; some have a BD-Live selection on its main menu; some may show a  
prompt to ask whether you would like to start downloading; and some may ask you to sign up for a  
membership or account. Please follow the instructions that come with the disc to enjoy BD-Live contents.  
Your Internet connection speed, the overall Internet traffic situation and the capacity of the BD-Live content  
servers can all affect how fast BD-Live contents can be downloaded. If you encounter slow downloading or  
intermittent playback, please play the disc without accessing the BD-Live features, or try again at a different  
time.  
When you use the BD-Live feature, the player or disc ID and your IP (Internet Protocol) address may be sent  
to the content provider via the Internet. Generally, no personally identifiable information is sent. However  
technologies exist to match your IP address to a certain geographical area or service provider. Your Internet  
service provider also has the knowledge of who is using which IP address. If the BD-Live content provider  
requires you to login using a membership or account, the content provider will have access to your  
membership or account information. Please check with your Internet service provider and the BD-Live content  
providers for their privacy policy.  
You can choose to restrict BD-Live Access using the player’s Setup Menu (See page 75).  
32  
ADVANCED OPERATIONS  
TV System Selection  
While you may want to set the video output system (NTSC/PAL) to the same  
as that supported by your TV, realize that the OPPO Blu-ray Disc Player will  
convert any content that is not in the correct format your TV understands. The  
default output is NTSC for North America.  
P/N  
Press and hold the P/N button for 5 seconds on the remote control to cycle the  
video output to PAL, NTSC or “Multi” system. The TV screen displays the  
selected system name.  
Some points to keep in mind:  
When the video output is set to PAL or NTSC system, the player will convert the disc content to  
the selected system.  
When the video output is set to “Multi”, the player will not perform system conversion. The  
“Multi” mode is only to be used if your TV supports both NTSC and PAL systems.  
Most TV sets only support one of the NTSC or PAL systems. If the wrong output is selected,  
the TV may not display a picture. In this case repeat pressing the P/N button until a supported  
system is selected.  
The output system selected with the P/N button will be remembered when the player is turned  
off. The output system selection can also be done by setting the “TV System” item in the  
Video Setup” section of the player’s Setup Menu. (Refer to page 53 for details.)  
Output Resolution  
The OPPO BDP-93 Blu-ray Disc Player supports multiple output  
resolutions. For detailed discussion on how to choose the best output  
resolution, please refer to the Select the Best Output Resolution  
section on page 23 of this manual.  
RESOLUTION  
If you would like to change the output resolution, you may do so by  
pressing the RESOLUTION button on the remote control:  
1. Make sure the video cable is properly connected.  
2. Turn on the TV. Adjust the TV to use the proper input (HDMI, DVI or Component).  
3. Make sure that the player is turned on. Although the output resolution can be changed “on the  
fly”, it is recommended that you stop playback and take out the disc before changing the output  
resolution. Press the RESOLUTION button. A “Resolution Setting” menu appears on the TV  
screen. If the TV does not support the current resolution and you cannot see the “Resolution  
Setting” menu, the current resolution is also displayed on the front panel.  
4. Use the UP/DOWN ARROW buttons to select the new output resolution. You may also press  
the RESOLUTION button multiple times to cycle through the available output resolutions. The  
new resolution is also displayed on the front panel if you cannot see the “Resolution Setting”  
menu on the TV screen.  
5. Press the ENTER button to apply the selected output resolution. Or, if you do not want to  
change the output resolution, press the RETURN button to exit.  
33  
A D V A N C E D O P E R A T I O N S  
The following output resolutions are available:  
NTSC output via HDMI 1 or HDMI 2:  
Auto Æ 1080p(60Hz/24Hz) Æ 1080i 60Hz Æ 720p 60Hz  
Æ 480p Æ 480i Æ Source Direct  
PAL output via HDMI 1 or HDMI 2:  
Auto Æ 1080p(50Hz/24Hz) Æ 1080i 50Hz Æ 720p 50Hz  
Æ 576p Æ 576i Æ Source Direct  
NTSC output via Analog (component):  
1080p 60Hz* Æ 1080i 60Hz Æ 720p 60Hz Æ 480p Æ 480i  
PAL output via Analog (component):  
1080p 50Hz* Æ 1080i 50Hz Æ 720p 50Hz Æ 576p Æ 576i  
* When 1080p is selected for the Analog output, the actual component output resolution will be 1080i.  
NOTE  
Some TV sets do not support one or more output resolutions (particularly 1080p). If  
an incompatible output resolution is selected, you will get a blank screen or an error  
message. In this case please select an output resolution that is supported by the TV.  
If you cannot get a picture using the HDMI or component output, please connect the  
player to the TV using the composite video output, then use the Setup Menu to adjust  
the player settings.  
Video up-conversion over the component output is only available for unencrypted  
discs such as home video and consumer-created contents. Most commercially  
pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution.  
This restriction applies to the component output only. The HDMI output is protected  
with HDCP and has no such restriction.  
DVD-A  
Zooming and Aspect Ratio Control  
This feature zooms in or out of the displayed frame and also changes the  
aspect ratio (image width vs. height).  
ZOOM  
To change the zoom level, press the ZOOM button on the remote control.  
Each press of the ZOOM button will switch the zoom level in sequence.  
Zoom Levels for HDMI 1 Output  
The following zoom levels are available when “Primary Output” is set to “HDMI 1”:  
1:1 (No zooming) Æ Stretch/Compress Æ Full Screen  
Æ Under Scan Æ 1.2 Æ 1.3 Æ1.5 Æ 2.0 Æ ½ ÆBack to 1:1 again  
The zoom level is reset to 1:1 when the disc is ejected, or when the player is turned off.  
34  
A D V A N C E D O P E R A T I O N S  
The available zoom levels depend on the “TV Aspect Ratio” setting in the Setup Menu and the aspect  
ratio of the DVD or Blu-ray Disc. The following zoom levels may be useful for some special applications:  
1) Playing 16:9 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide” or “16:9 Wide/Auto”  
Stretch – The image is vertically stretched by 1.33 times. For movies with 2.35:1 aspect ratio,  
this zoom level cuts off the black borders at the top and bottom of the image. Users of projector  
with anamorphic lens may find this mode helpful.  
Original 2.35:1  
“Stretch” Zoom  
Projected through  
Widescreen Movie  
an Anamorphic Lens  
Full Screen – The image is stretched by 1.33 times for both vertical and horizontal directions.  
For movies with 2.35:1 aspect ratio, this zoom level cuts off the black borders at the top and  
bottom of the image while maintaining the correct aspect ratio. The left and right sides of the  
image are slightly cropped.  
Original 2.35:1 Widescreen Movie  
“Full Screen” Zoom  
2) Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide”  
1:1 - The image fills up the entire 16:9 screen but is horizontally stretched. Figures may look  
shorter and wider than they should be.  
Compress – The player maintains the correct 4:3 aspect ratio and adds borders to the left and  
right sides of the image. The brightness level of the borders can be set by the “Border Level”  
setting in the “Picture Adjustment” section of the Setup Menu.  
Full Screen – This zoom level maintains the correct aspect ratio but crops the top and bottom  
slightly in order to fit the 4:3 image to the 16:9 screen.  
1:1  
“Compress” Zoom  
“Full Screen” Zoom  
35  
A D V A N C E D O P E R A T I O N S  
3) Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide/Auto”  
1:1 – The player maintains the correct 4:3 aspect ratio and adds borders to the left and right  
sides of the image.  
Stretch – The image is horizontally stretched by 1.33 times. This zoom level fills up the 16:9  
screen, but figures may look shorter and wider than they should be.  
Full Screen – This zoom level maintains the correct aspect ratio but crops the top and bottom  
slightly in order to fit the 4:3 image to the 16:9 screen.  
1:1  
“Stretch” Zoom  
“Full Screen” Zoom  
The “Under Scan” zoom level shrinks the image by 5%. This zoom level may be used to  
compensate for TVs that over scan, so the viewer can see the entire image area with no cropping.  
All other zoom levels are indicated by their respective zoom ratio.  
NOTE  
Some early DVD titles (released from 1997 until early 2000’s) use a 4:3 non-anamorphic  
widescreen aspect ratio. When played on a 16:9 display, the content is shown in a small  
window with black borders on all four sides. The top and bottom borders are encoded  
into the video. The left and right borders are added by the player to maintain the correct  
aspect ratio. For this type of discs the “Full Screen” zoom mode can be used to eliminate  
the borders.  
Due to the dominance of wide screen or 16:9 TV, NO specific ZOOM levels are provided  
for “TV Aspect Ratio” of “4:3 Letterbox” or “4:3 Pan & Scan”  
Zoom Levels for HDMI 2 & Analog (Component) Video Output  
The following zoom levels are available when “Primary Output” is set to “HDMI 2 & Analog”:  
1:1 (No zooming) Æ Stretch/Compress Æ Full Screen  
Æ Under Scan Æ 1.2 Æ 1.3 Æ1.5 Æ 2.0 Æ ½ ÆBack to 1:1 again  
NOTE  
The ZOOM feature may not be available when certain DVD or Blu-ray Discs are played  
because the disc author chooses to disable ZOOM.  
36  
A D V A N C E D O P E R A T I O N S  
Subtitle Shift  
For customers using a 2.35:1 “Constant Image Height” video projection  
system, subtitles may get cut off because they are positioned outside of  
the active video area. The Subtitle Shift feature can be useful to these  
customers. The player can shift subtitles up or down so they are  
displayed within the active video area.  
SUBTITLE  
To shift the display position of subtitles, please follow these steps:  
1. When playing a DVD, Blu-ray Disc or other video programs recorded with subtitles, select the  
desired subtitle from the disc menu or using the remote. (Please refer to page 31 of this manual.)  
2. Press and hold the SUBTITLE button on the remote control until the “Shift Subtitle Position”  
prompt appears on the screen.  
3. Wait until some subtitle text is shown on the screen. Use the UP/DOWN ARROW buttons to  
move the subtitle text to the desired position.  
4. Press the ENTER button to set the subtitle display position.  
Once the “Subtitle Shift” position is set, it is remembered by the player in the Video Setup > Display  
Options > Subtitle Shift setup menu option. The setting will be applied to subtitles of all DVD and Blu-  
ray Discs from now on. You can also change the setup menu item directly. Please refer to the “Video  
Setup” section beginning at page 54 of this manual for details.  
SACD  
DVD-A  
Repeat Playback  
To repeat a certain chapter, title, track or disc, press the REPEAT button on the  
remote control.  
REPEAT  
Each press of the REPEAT button switches the repeat mode in the following  
sequence:  
DVD and DVD-Audio:  
Blu-ray Disc:  
Repeat Chapter  
Repeat Title  
Repeat All  
Repeat Off  
Repeat Chapter  
Repeat Title  
Repeat Off  
CD and SACD:  
Repeat One  
Repeat All  
Repeat Off  
NOTE  
Certain Blu-ray Discs may not allow for repeating.  
37  
A D V A N C E D O P E R A T I O N S  
SACD  
DVD-A  
Repeat a Selected Section  
To repeatedly play a specified section, please follow these steps:  
1. During normal playback, press the AB REPLAY button on the  
remote at the desired beginning point (Point A) for the repeat play.  
The TV screen displays “A-”.  
AB REPLAY  
2. When playback reaches the desired ending point (Point B) for the repeat play, press the AB  
REPLAY button again. The player now repeatedly plays back the specified section (A-B). The  
TV screen displays “A-B”.  
3. Press the AB REPLAY button for the third time to resume normal playback.  
NOTE  
Not available for all disc formats or contents. Certain Blu-ray Discs may not allow for  
repeating.  
SACD  
Shuffle and Random Playback  
When playing a CD or SACD, press the BLUE button on the remote control to  
activate the Shuffle and Random modes. Each press of the BLUE button  
switches the playback mode in the following sequence:  
BLUE  
Shuffle  
Random  
Normal  
In normal playback mode, each track is played back in sequential order. As the name implies, the  
Random playback mode randomly selects a track to play. The Shuffle mode also plays back the tracks  
in random order, but it ensures that each track is played only once.  
Selecting the Shuffle or Random mode cancels any Repeat mode you may be using. Similarly,  
selecting a Repeat mode cancels any Shuffle or Random mode.  
SACD  
DVD-A  
Playback by Chapter or Track Number  
During the playback of a disc, you can use the NUMBER buttons on the  
remote control to directly jump to a specified chapter or track number. For  
example:  
NUMBER  
BUTTONS  
To select the seventh track, press the [7] button.  
To select the 16th track, press [1] followed by [6] in quick  
succession:  
+
NOTE  
Certain DVD-Audio and Blu-ray Discs may not allow for direct chapter selection.  
38  
A D V A N C E D O P E R A T I O N S  
SACD  
DVD-A  
Playback from a Specific Location  
DVD and Blu-ray Discs  
During the playback of a DVD or Blu-ray Disc, you may specify a  
location to start playback by entering the title, chapter or time  
directly. Press the GOTO button to bring up the on-screen display.  
1 / 7  
5 / 25  
00:22:14  
00:40:06  
PAGE  
UP/DOWN  
NUMBERS  
GOTO  
On top of the video screen, the on-screen display information has  
the following components (from left to right): Playing Status, Title,  
Chapter, Time Counter, Progress Indicator, and Total Time. After  
pressing the GOTO button for the first time, the cursor will be  
positioned at the Time Counter. This is the “Time Search” mode.  
Each subsequent press of the GOTO button will switch the search  
mode in the following sequence:  
DISPLAY  
ENTER  
ARROWS  
(Title or Chapter) Time Search  
On-Screen Display  
Chapter Search  
Title Search  
1. Title time search. For example, search for a specified time within the currently playing title.  
Press the GOTO button to bring up the on-screen display. The cursor will be positioned at  
the Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and  
seconds for your specified search and press the ENTER button.  
1 / 7  
5 / 25  
00:22:14  
00:40:06  
2. Chapter time search. For example, search for a specified time within the currently playing  
chapter.  
Press the DISPLAY button to bring up the on-screen display. Use the PAGE UP or PAGE  
DOWN button to switch the display to Chapter Time mode (note the icon placed on the left  
of the Time Counter changes from the Title icon to the Chapter icon). Press the GOTO  
button to position the cursor at the Time Counter, then use the NUMBER or ARROW  
buttons to enter the hours, minutes and seconds for your specified search and press the  
ENTER button.  
1 / 7  
5 / 25  
00:06:48  
00:08:33  
3. Chapter search. For example, search for Chapter 7 of the currently playing title.  
Repeatedly press the GOTO button until the cursor is positioned at the Chapter location.  
Use the NUMBER or ARROW buttons to enter or select 7 and press the ENTER button.  
1 / 7  
5 / 25  
00:22:14  
00:40:06  
4. Title search. For example, search for Title 6 of the currently playing disc.  
Repeatedly press the GOTO button until the cursor is positioned at the Title location. Use  
the NUMBER or ARROW buttons to enter or select 6 and press the ENTER button.  
39  
A D V A N C E D O P E R A T I O N S  
1 / 7  
5 / 25  
00:22:14  
00:40:06  
NOTE  
Some discs may prohibit the search operation. You will not be able to select a search  
location, or you may get an “invalid operation” icon after specifying a search location.  
Some Blu-ray Discs feature their own search function. Please follow the on-screen  
instructions to use the search function provided by such discs.  
CD and SACD discs  
You may specify a point to start playback by entering the disc elapsed time, track elapsed time or track  
number directly. When playing CD and SACD discs, the on-screen display automatically shows on the  
TV screen:  
1 / 8  
00:08:16  
00:12:33  
The on-screen display has the following components (from left to right): Playing Status, Track Number,  
Time Counter, Progress Indicator, and Total Time.  
To specify a playback location using one of the following search modes, press the GOTO button. Each  
press of the GOTO button switches the search mode in the following sequence:  
(Track or Disc)Time Search  
On-screen Display  
Track Search  
1. Track time search. For example, search for a specified time within the currently playing track.  
Press the GOTO button to place the cursor on the track Time Counter. Use the NUMBER  
or ARROW buttons to enter the hours, minutes and seconds for your specified search and  
press the ENTER button.  
1 / 8  
00:08:16  
00:12:33  
2. Disc time search. For example, search for a specified elapsed time of the entire disc.  
While the on-screen display is shown, press the PAGE UP or PAGE DOWN button to  
switch the Time Counter to Disc Time mode. Press the GOTO button to place the cursor at  
the Disc Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes  
and seconds for your specified search and press the ENTER button.  
5 / 8  
00:40:46  
01:02:33  
3. Select a track. For example, search for Track 6 of the currently playing disc.  
Repeatedly press the GOTO button until the cursor is placed on the Track Number position.  
Use the NUMBER or ARROW buttons to enter or select Track 6 and press the ENTER  
button.  
1 / 8  
00:08:16  
00:12:33  
40  
A D V A N C E D O P E R A T I O N S  
Memory and Automatic Resume  
SACD  
DVD-A  
1. The player automatically remembers the current position when  
playback is interrupted. Operations such as STOP, OPEN/EJECT  
or turning POWER off will cause the player to save the current  
playing position.  
POWER  
OPEN  
2. The position is memorized even after turning off the unit or  
changing the disc.  
3. When the next time the disc with a memorized playing position is  
played back, the player will recognize the saved playing position.  
Playback will automatically resume from this saved position.  
However if you wish to cancel the automatic resume and start  
playback from the beginning, you may press the STOP button when  
prompted.  
4. The player can remember playback position for up to 5 discs.  
When the sixth disc is memorized, the oldest one is replaced.  
STOP  
PLAY  
NOTE  
Some Blu-ray Discs do not support resuming and will always play from the beginning.  
DVD-A  
Viewing Pictures on DVD-Audio Discs  
Some DVD-Audio discs contain static pictures, such as photos of the band or  
narration of the album. When a DVD-Audio track is playing, you may use the  
PAGE  
UP/DOWN  
PAGE UP button to select the previous picture or the PAGE DOWN button to  
select the next picture.  
NOTE  
Availability of static pictures depends on the DVD-Audio disc.  
SACD  
DVD-A  
Pure Audio Mode  
You can enjoy higher quality audio by turning off the video processing and  
output. The Pure Audio mode reduces any potential interference between the  
video and audio signals.  
PURE  
AUDIO  
1. Press the PURE AUDIO button on the remote control to turn off  
video and enter Pure Audio mode. Video output will cease, the  
power light will dim and the front panel displays will turn off.  
2. Press the PURE AUDIO button again to resume video and cancel  
Pure Audio mode.  
NOTE  
Pure Audio mode is automatically canceled when the unit is switched off or when  
playback is stopped.  
Because HDMI carries audio together with video, the HDMI video signal cannot be  
completely turned off. A black screen is transmitted instead to minimize any potential  
interference.  
41  
MEDIA FILE PLAYBACK  
In addition to playing standard disc-based formats such as Blu-ray Disc, DVD, CD and SACD, the  
OPPO BDP-93 Blu-ray Disc Player can play media files. You can enjoy digital music, movies and  
photos stored on an optical disc (recordable CD or DVD), a USB (Universal Serial Bus) drive, or an e-  
SATA (external Serial ATA) drive. Due to the variation of media, encoding software and techniques  
used, compatibility cannot be guaranteed for all user-created or downloaded contents. Support for such  
contents is on a best effort basis.  
Playback from a USB or e-SATA Drive  
USB  
Device  
e-SATA  
Device  
The OPPO BDP-93 Blu-ray Disc Player is equipped with two USB ports (one on the front panel and the other  
on the back) and one e-SATA port on the back. You may use the USB port to plug in a USB drive, or the e-  
SATA port to plug in an e-SATA drive.  
The USB ports are rated to provide a maximum of 5V, 1000mA power to the USB drive. It is sufficient for  
USB thumb drives and flash memory card readers, but may not be sufficient for USB hard disks. It is  
recommended to check with your drive manufacturer for power requirement, or use an external power supply.  
For the e-SATA port, you need to use an e-SATA drive with an external power supply.  
The e-SATA port on the BDP-93 does NOT support “hot-plug”. To avoid any damage to your drive and the  
port, please always plug in or unplug the drive when the player is turned off.  
NOTE  
This unit supports “USB Mass Storage Class Bulk-Only Transport” devices only. Most  
USB thumbs drives, portable hard disk drives and card readers conform to this device  
class. Other USB devices such as MP3 players, digital cameras, and mobile phones  
may not be compatible.  
Supported USB drives can be formatted with the FAT (File Allocation Table), FAT32 or  
NTFS (New Technology File System) file system.  
In some cases, an incompatible USB/e-SATA device may cause the player to stop  
responding. If this occurs simply turn off the power, remove the USB device, and turn the  
player back on.  
The player accesses the USB drive in read-only mode. In order to minimize the risk of  
data corruption, it is recommended that you only unplug the USB device when playback  
is completely stopped.  
DO NOT attempt to plug in a USB connector to the e-SATA port, or plug in an e-SATA  
connector to the USB port(s). This might damage both your drive and the port(s).  
42  
M E D I A F I L E P L A Y B A C K  
The Home Menu  
When a USB/e-SATA drive or an optical disc stored with media files is inserted, the player presents a “Home  
Menu” to assist you in navigating and playing the files. You can also bring up the Home Menu with the HOME  
button on the remote control. The Home Menu is the starting point for accessing media files.  
HOME  
There are eight selections in the HOME Menu:  
Depending on what type of media files that you intend to play, you can choose among the  
Music”, “Movie” and “Photo” categories.  
My Network” is an experimental feature right now. It enables the player to stream audio, video  
and photo from media servers on the home network.  
Netflix” connects you to your Netflix account and provides online movie streaming capability.  
Blockbuster” connects you to your Blockbuster account and provides online movie rental,  
purchase and streaming capability.  
Film Fresh” connects you to your Film Fresh account and provides online movie and TV Show  
rental, purchase and streaming capability.  
Picasa” connects you to your Picasa account and provides online photo viewing and sharing  
capability.  
Internet” contains the shortcuts to Netflix and Blockbuster, as well as the additional network  
applications which are added later in the future.  
Setup Menu” selection will bring you to the player’s Setup Menu, just like pressing the SETUP  
button on the remote control.  
NOTE  
z
The experimental features are not officially supported. OPPO does not offer technical  
support via email or phone for these experimental features. The OPPO Wiki located at  
wiki.oppodigital.com can be a useful resource to learn about the experimental features.  
z
Different internet streaming applications may have different function mappings to the  
BDP-93 remote control. To exit Netflix, press HOME button. To exit Blockbuster, Film  
Fresh and Picasa, either press HOME button or repeatedly press RETURN button till the  
Home Menu shows. Please contact OPPO customer support if you need assistance.  
43  
M E D I A F I L E P L A Y B A C K  
Playing Music Files  
To play digital music files stored on an optical  
disc, USB or e-SATA drive, select “Music” from  
the Home Menu. A file browser will appear to  
assist you in navigating the files and folders.  
The first step is to select the “Data Disc”, USB or  
e-SATA device that contains the music files. The  
player will take a moment to read the media and  
list the folders and music files.  
In the music browser, you can perform the  
following operations:  
Music  
01 / 11 items  
Title: Prelude I C major  
USB1  
Artist: Various  
..  
Press the UP/DOWN ARROW or PAGE  
UP/DOWN buttons to move the cursor and  
select music files.  
When a music file is highlighted by the  
cursor, press the ENTER or PLAY button  
to start playback.  
Press the GREEN color button to add the  
currently highlighted music file to the  
Playlist. A green check mark will appear in  
front of the file name, and the Playlist count  
in the lower left corner of the screen will  
increase by one.  
Album: J.S. Bach  
Genre: Classical  
Prelude I C major  
Prelude II C minor  
C sharp major  
C sharp minor  
D major  
All Music  
Playlist  
0
Browser  
D minor  
Now Playing  
E flat major  
Add to Playlist  
Back  
Press the LEFT ARROW button to move the cursor to the Selection Menu in the lower left corner of  
the screen. This menu contains the following choices:  
o
o
o
All Music – List all music files in a flat view without any directory structure.  
Playlist – List only music files added to the Playlist.  
Browser – List folders and music files according to the original directory structure on the  
disc or USB drive.  
o
o
Now Playing – Show the status of the currently playing music file.  
Press the RIGHT ARROW button to move the cursor back to the file listing.  
If a music file starts playing and there is no other user operation, the “Now Playing” screen will appear  
after a few seconds. You can also get to this screen using the “Now Playing” menu. This screen can  
show the following information:  
Playback status: Play, Stop, Pause  
Playback mode: Shuffle, Random, Repeat One, Repeat All  
Playback progress: track and time  
Other embedded information: If the music file contains supported album art image and tags,  
those will be displayed.  
44  
M E D I A F I L E P L A Y B A C K  
The following operations are available while  
the “Now Playing” screen is shown:  
Normal playback control: PLAY,  
STOP, PAUSE, PREV/NEXT, REV,  
and FWD  
Prelude I C major  
02:40 / 05:38  
Play  
1 / 11  
Special playback mode: REPEAT and  
Shuffle/Random (BLUE color button)  
Return to the Browser without stopping  
the music: RETURN  
Stop playback and return to the  
Browser: Press STOP twice.  
Title: Prelude I C major  
Artist: Various  
Album: J.S. Bach  
Genre: Classical  
Shuffle/Random  
Back  
Playing Movie Files  
To play movie files stored on an optical disc, USB or e-SATA drive, select “Movie” from the Home Menu. A  
file browser will appear to assist you in navigating the files and folders.  
The first step is to select the “Data Disc”, USB or  
Movie  
e-SATA device that contains the movie files. The  
player will take a moment to read the media and  
list the folders and movie files.  
1 / 3 items  
Data Disc  
USB1  
HDD1  
Back  
In the movie browser, you can perform the  
following operations:  
Movie  
04 / 11 items  
USB1  
..  
Press the UP/DOWN ARROW or PAGE  
UP/DOWN buttons to move the cursor and  
select movie files.  
When a movie file is highlighted by the  
cursor, press the ENTER or PLAY button  
to start playback.  
CD-R  
Total Time:  
3:00:35  
640x352  
24 fps  
AVI  
Classic  
Resolution:  
Frame Rate:  
Format:  
Action  
New Year Concert  
Soccer Match Jul-08  
Kingdom  
Hitchhiker  
Once a movie file starts playing, the normal  
playback control functions are available. To  
stop the movie and return to the file browser,  
press STOP twice. You can also press the  
HOME button at any time to get back to the  
Home Menu.  
Back  
45  
M E D I A F I L E P L A Y B A C K  
Viewing Photo Files  
To view digital photo files stored on an optical disc, USB or e-SATA drive, select “Photo” from the Home Menu.  
A file browser will appear to assist you in navigate the files and folders.  
The first step is to select the “Data Disc”, USB or  
Photo  
e-SATA device that contains the photo files. The  
player will take a moment to read the media and  
list the folders and photo files.  
1 / 3 items  
Data Disc  
USB1  
HDD1  
In the photo browser, you can perform the  
following operations:  
Press the UP/DOWN ARROW or PAGE  
UP/DOWN buttons to move the cursor and  
select photo files.  
When a photo file is highlighted by the  
cursor, press the ENTER or PLAY button  
to start playback in a full screen slideshow  
fashion.  
Back  
The following operations are available during the  
photo slideshow:  
Photo  
04 / 11 items  
Format:  
Size:  
JPG  
USB1  
0.27M  
..  
Show the help screen: DISPLAY  
Normal playback control: PLAY, STOP,  
PAUSE, and PREV/NEXT  
Resolution: 1024x768  
Date time: 2007-04-17  
Model:  
Yellow Stone  
Yosemite  
New Year Parade  
Sand Dunes  
DSCF1023  
DSCF1024  
DSCF1025  
Adjust slideshow speed: REV and FWD  
Zoom: ZOOM. Once in a zoom mode the  
ARROW buttons can be used to pan the  
photo.  
Reflect (flip the photo along its horizontal  
axis to make it upside-down): UP ARROW  
Mirror (flip the photo along its vertical axis to  
make it a mirror image): DOWN ARROW  
Back  
Rotate left (counterclockwise): LEFT ARROW  
Rotate right (clockwise): RIGHT ARROW  
Repeat: REPEAT  
Show photos in “Digest” mode: RED color button. The “Digest” mode shows the 9 photo thumbnails  
in a screen to make visual navigation easy.  
Show EXIF information: GREEN color button  
Play in random sequence: BLUE color button  
Change slideshow transition effect: YELLOW color button.  
Adding Background Music  
You can add background music to the photo slideshow. To do so, you will need to prepare some digital music  
files. The music files can be stored on the same disk as the photos, or on a different USB / e-SATA drive.  
Start music playback first by selecting “Music” from the home menu. Once the music is playing, press the  
HOME button to get back to the home menu, and start the photo slideshow by selecting “Photo” in the usual  
manner.  
46  
SETUP MENU OPTIONS  
The Setup Menu of the OPPO Blu-ray Disc Player presents many setup and configuration options. For  
most users, the default configuration will be sufficient and will not require any changes to the settings.  
However if you need to configure the player to perfectly match your home theater setup and viewing  
preferences, please refer to the following sections for details about each configuration option.  
Using the Setup Menu System  
In many places of this guide, the player’s Setup Menu needs to be adjusted to match your specific audio/video  
configuration. When performing menu adjustments, we will use the following terminology to indicate the  
location of the desired function:  
Setup Menu Section > Menu Item > Selection  
Setup Menu Section is the uppermost Setup Menu level. With the OPPO BDP-93 there are six (6) Setup  
Menu sections listed in the left column of the Setup Menu screen. They are: Playback Setup, Video Setup,  
Audio Format Setup, Audio Processing, Device Setup, and Network Setup.  
Menu Item is the parameter to be adjusted which appears in the center column of the Setup Menu. Once you  
enter a Setup Menu Section, the list of Menu Items and their current value are displayed in a box.  
Selection is the actual numeric or descriptive element that represents the change being made to the selected  
parameter. It is the item located to the right of its corresponding Menu Item.  
A Scroll Mark appears at the top or bottom of the menu when there are more Menu Items or Selections  
than what can fit in a screen. You may use the UP and DOWN ARROW buttons to scroll the display in order  
to access additional items.  
Setup Menu Section  
Menu Item  
Current Value  
Selection  
Setup Menu  
Playback Setup  
Video Setup  
SACD Priority  
DVD-Audio Mode  
Auto Play Mode  
PBC  
On  
Off  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
Parental Control  
Language  
Playback starts when the PLAY button is pressed  
Exit  
Navigation Cue  
Help Hint  
Scroll Mark  
47  
S E T U P M E N U O P T I O N S  
The preceding diagram should give a good description of the various elements and their context. In this  
screen we could, for example, instruct you to set the Auto Play Mode parameter to Off in the Playback  
Setup section. To indicate where we were, you would see the following: Playback Setup > Auto Play Mode  
> Off.  
NOTE  
It is possible that some setup items are grayed-out and inaccessible. This can be caused by  
the disc still being played back or interlocking with mutually exclusive setup items. Please  
stop playback or eject the disc before trying to change these setup items. If you still cannot  
access the setup item, please check for configuration conflicts and consistency. For  
example, if “Video Setup > Primary Output” is set to “Analog”, the “Output Resolution >  
Auto (or Source Direct)” menu item will be grayed-out. Setting “Primary Output” to “HDMI  
1 (or HDMI 2)” will enable the “Auto (or Source Direct)” resolution.  
To access the player’s Setup Menu simply press the SETUP button on the remote control. Since some Setup  
Menu options can become inaccessible when the player is playing a disc, it is recommended that you operate  
the Setup Menu when playback is fully stopped or when there is no disc in the player.  
1. Press the SETUP button on the remote control, and the TV screen displays the following:  
2. Press the UP/DOWN ARROW buttons to  
select the section. There are 6 sections:  
Playback Setup, Video Setup, Audio  
Format Setup, Audio Processing,  
Device Setup, and Network Setup.  
Press the ENTER button or the RIGHT  
ARROW button to enter the selected  
section.  
Setup Menu  
Playback Setup  
SACD Priority  
DVD-Audio Mode  
Auto Play Mode  
PBC  
Multi-Channel  
DVD-Audio  
On  
Video Setup  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
On  
Parental Control  
Language  
3. Press the UP/DOWN ARROW buttons to  
select the setup item to be changed, and  
press the ENTER or RIGHT ARROW  
button to change the setting. When the  
scroll icon is shown at the top or bottom of  
the Setup Menu, it indicates that there are  
more menu items that can be accessed by  
scrolling with the UP/DOWN ARROW  
buttons.  
Configure playback preferences  
Exit  
Setup Menu  
Playback Setup  
Video Setup  
SACD Priority  
DVD-Audio Mode  
Auto Play Mode  
PBC  
Multi-Channel  
DVD-Audio  
On  
For example, in the Playback Setup  
section, you may use the UP/DOWN  
ARROW buttons to select the “Auto Play  
Mode” setup item, and press the ENTER  
button to change the “Auto Play Mode”  
setting.  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
On  
Parental Control  
Language  
Set the auto play mode for CD and SACD  
Exit  
48  
S E T U P M E N U O P T I O N S  
4. To select a value from the list of available  
settings, press the UP/DOWN ARROW  
buttons and then press the ENTER button  
to confirm.  
Setup Menu  
Playback Setup  
Video Setup  
SACD Priority  
DVD-Audio Mode  
Auto Play Mode  
PBC  
On  
Off  
For example, to select “Off” for “Auto Play  
Mode”, use the UP/DOWN ARROW  
buttons to highlight the “Off” selection and  
press the ENTER button.  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
Language  
5. To exit the SETUP menu at any time,  
press the SETUP button on the remote  
control or select Exit from the Setup Menu  
sections.  
Playback starts when the PLAY button is pressed  
Exit  
The settings are permanently saved when the player is turned off using either the front panel power  
button or the remote control. If the AC power is interrupted before the player enters standby status, the  
settings will not be saved. To ensure proper saving of the SETUP menu settings, please turn off the  
player and turn it back on after you make major changes to the SETUP menu options.  
49  
S E T U P M E N U O P T I O N S  
Playback Setup  
The “Playback Setup” section is designed to configure playback preferences for various contents. The setup  
items in this section are:  
Setup Menu  
Playback Setup  
Video Setup  
SACD Priority  
DVD-Audio Mode  
Auto Play Mode  
Auto Resume  
PBC  
Multi-Channel  
DVD-Audio  
On  
On  
On  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
Parental Control  
Language  
Choose which SACD layer to play  
Exit  
1. SACD Priority: To select which audio layer to play for SACD (Super Audio CD). The options  
are:  
Multi-Channel – Play the multi-channel surround audio layer  
Stereo – Play the 2-channel stereo audio layer  
CD Mode – Play the CD layer of a hybrid SACD disc  
2. DVD-Audio Mode: To select which portion of a DVD-Audio disc to play. The options are:  
DVD-Audio – Play the DVD-Audio portion of the disc with high-resolution audio  
DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio  
3. Auto Play Mode (On / Off): To select whether the player shall start playing an audio CD or  
SACD automatically. When auto play mode is turned on, these discs will start playing upon  
insertion into the player. When auto play mode is turned off, the player will wait for the user to  
start playback by pressing the PLAY button.  
4. Auto Resume (On / Off): To select whether the disc playback shall start from the previously  
saved point or not. This setting applies to CD, SACD, DVD and certain Blu-ray disc. When  
auto resume is turned on, the playback automatically starts from the previously saved point.  
When auto resume is turned off, the playback starts from the beginning.  
5. PBC – Play Back Control: To enable/disable Play Back Control. Play Back Control is a  
primitive form of disc menu. The options are:  
On – If the disc contains Play Back Control, show the menu.  
Off – Play back the contents by sequence.  
6. Parental Control: To set parental control ratings in order to prevent minors from watching  
inappropriate content. This function depends on the disc being properly rated and encoded.  
Press the ENTER button to bring up the rating selection menu.  
To adjust the parental control settings, you must enter the current parental control password.  
If you have not set a parental control password yet, the default password is “0000”.  
The parental control menu contains the following sub-items:  
50  
S E T U P M E N U O P T I O N S  
BD Ratings - Press the UP/DOWN ARROW buttons to select the rating allowed for  
Blu-ray Discs. “Off” means no ratings control and all discs are allowed to play.  
Numbers 1 to 21 corresponds to the age limit. Discs encoded with an age limit that is  
equal to or below the selected age will be allowed, and any rating above the selected  
age will be blocked.  
DVD Ratings - Press the UP/DOWN ARROW buttons to select the rating to allow for  
DVD. The available ratings are Kid, G, PG, PG-13, PGR, R, NC17, Adult and Off. The  
selected rating and below will be allowed, and any rating above will be blocked. If “Off”  
is selected, all discs are allowed to play.  
Area Code – Some Blu-ray Discs may have different parental control ratings for  
different geographical areas. At this time the player only supports the parental control  
ratings used in the United States.  
Change Password – To change the parental control password, enter a 4-digit number  
as the new password. Enter the new password again to confirm. If the two entries are  
matching, the new password replaces the old parental control password.  
7. Language: To configure language preferences. The menu contains the following sub-items:  
Player Language – To choose the display language for the player’s Setup Menu and the  
on-screen display. At this time only English is available.  
Disc Menu Language – To choose the preferred language for displaying DVD and Blu-ray  
Disc menus. If a disc menu of the selected language is available, that menu will be shown  
instead of the default disc menu.  
Audio Language – To choose the preferred audio language for DVD and Blu-ray Discs. If  
an audio track of the selected language is available on the disc, the audio track will be  
played back.  
Subtitle Language – To choose the preferred subtitle language for DVD. If a subtitle of the  
selected language is available, it will be displayed. When “Auto” is selected, the subtitle  
display is decided by the disc.  
NOTE  
If your preferred language is not listed in the Audio, Subtitle or Disc Menu options, select  
“Other” and enter the Language Code found on page 82 of this manual.  
51  
S E T U P M E N U O P T I O N S  
Video Setup  
The “Video Setup” section of the Setup Menu system allows you to configure video output options. The menu  
items in this section are:  
Setup Menu  
Picture Adjustment  
Primary Output  
3D Mode  
Playback Setup  
Video Setup  
HDMI 1  
Auto  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
3D TV Size  
46  
TV Aspect Ratio  
TV System  
16:9 Wide  
NTSC  
Auto  
Output Resolution  
Adjust picture control parameters  
Exit  
1. Picture Adjustment: To adjust picture control parameters. The OPPO BDP-93 Blu-ray Disc  
Player provides a wide array of picture controls. Please refer to the Picture Adjustment  
section on page 55 of this manual for details of each control.  
2. Primary Output: To select the primary video output port. The options are:  
HDMI 1 – Use HDMI 1 as the primary video output port. This setting will ensure that the  
HDMI 1 output gets the best possible picture quality. The dedicated QDEO DE2750 video  
processor will be used unless “Source Direct” for output resolution is selected, in which  
case QDEO DE2750 video processor is bypassed. Component and composite video output  
may not be available or may be limited to a lower resolution based on content source  
limitations.  
HDMI 2 – Use HDMI 2 as the primary video output port. Similar to “HDMI 1”, this setting  
ensures that the HDMI 2 output gets the best possible picture quality, except that it utilizes  
the video decoder in the player to perform necessary video processing, not the DE2750  
video processor.  
Analog – Use component video as the primary video output port. This setting will ensure  
that the component output is always available and displays proper video signals. The video  
decoder in the player performs any necessary format conversion, and the DE2750 video  
processor is completely bypassed.  
NOTE  
Copyright control mechanisms encoded on the disc may limit the output resolution of the  
component video output. For DVD, if CSS encryption is in use the output resolution is limited  
to no more than 480p/576p; for Blu-ray Discs, the output resolution is limited to no more than  
1080i, and could be lower if the disc contains the Image Constraint Token.  
3. 3D Mode: To choose the video output mode for available 3D contents at the HDMI output ports.  
The options are:  
Auto – Output 3D if supported both by the disc content and the display. The player  
automatically checks for the existence of 3D content on the disc and the 3D compatibility of  
52  
S E T U P M E N U O P T I O N S  
the TV or projector. If both are qualified, the player sends 3D video from its HDMI output  
terminals, otherwise only 2D video is sent out. Active shutter 3D-compatible glasses (which  
are not sold by OPPO Digital, Inc.) are required to enjoy the 3D movie on your TV.  
Off – Always output 2D video format, even when 3D video exists on the disc. This  
guarantees the video quality if your TV is not 3D compatible, or some necessary part (such  
as the 3D glasses) is missing.  
Forced – Always output 3D video format for 3D Blu-ray discs. You might experience a  
black screen (no video output) if your TV is not 3D compatible.  
4. 3D TV Size: To enter the diagonal screen size of your 3D-compatible HDTV. This option  
applies to 3D mode, to help the player adjust the 3D image for better visual quality.  
Use the number buttons on the remote control to enter the actual diagonal size of your TV  
screen, or use the DOWN ARROW button to delete the digits. The default is 46 inches.  
5. TV Aspect Ratio: To set the aspect ratio of the player’s output image. The options are:  
4:3 Letterbox – Choose this when the display is standard 4:3. A widescreen image is  
displayed in “letterbox” format with black borders on top and bottom.  
4:3 Pan & Scan – Choose this when the display is standard 4:3. A widescreen image will  
be stretched.  
16:9 Wide – Choose this when the display is widescreen 16:9. 16:9 materials will be  
displayed in its native aspect ratio, and 4:3 materials will be stretched horizontally.  
16:9 Wide/Auto – Choose this when the display is widescreen 16:9. 16:9 materials will be  
displayed in its native aspect ratio, and 4:3 materials will be displayed with black borders on  
both sides in order to maintain the original 4:3 aspect ratio.  
For a detailed description on how to choose a proper TV Aspect Ratio, please refer to the  
Determine the Display Aspect Ratio section on page 24 of this manual.  
6. TV System: To choose the output video system or broadcast standard (PAL/NTSC) to match  
the type of TV. The options are:  
NTSC (default) – When playing NTSC-encoded discs, no system conversion is performed.  
PAL-encoded contents are converted to NTSC output. Blu-ray Discs encoded with 24Hz  
frame rate are converted to 60Hz frame rate if neither 1080p24 Output nor Source Direct  
output resolution is enabled.  
PAL – When playing PAL-encoded discs, no system conversion is performed. NTSC-  
encoded contents are converted to PAL output. Blu-ray Discs encoded with 24Hz frame  
rate are converted to 50Hz frame rate if neither 1080p24 Output nor Source Direct output  
resolution is enabled.  
Multi-system – No system conversion is performed. The output video system is the same  
as that encoded on the disc. Blu-ray Discs encoded with 24Hz frame rate are converted to  
60Hz frame rate if neither 1080p24 Output nor Source Direct output resolution is enabled.  
Requires a TV that supports both NTSC and PAL systems.  
NOTE  
DO NOT select “Multi-system” if your TV does not support both NTSC and PAL systems.  
The TV display may become a black screen upon inserting a disc encoded in a different  
53  
S E T U P M E N U O P T I O N S  
system than your TV supports. Should this happen, you can press the OPEN button to eject  
the disc tray, and then use the Setup Menu to correct the “TV System” setting.  
7. Output Resolution: To choose the output resolution that best matches your television’s native  
resolution. For a detailed description on how to choose a proper output resolution, please refer  
to the Select the Best Output Resolution section on page 23 of this manual.  
8. 1080p24 Output: To set 1080p 24Hz output options. This option only applies to the HDMI  
output at 1080p resolution. Many Blu-ray Discs that originated from theatrical movies are  
encoded using 24Hz frame rate, the same number of frames per second as the original  
theatrical film. If the TV properly supports 1080p 24Hz, smoother motion can be achieved by  
enabling 1080p24 Output for such discs. The available options are:  
Auto (default) – Video encoded in 24Hz frame rate will be output as 1080p 24Hz if the TV  
informs the player that it can support the 1080p24 signal.  
On – Video encoded in 24Hz frame rate will be output as 1080p 24Hz without regard to  
whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually  
support 1080p24 but does not properly state its capability. Please note that if the TV cannot  
support 1080p24, selecting this option will result in no video.  
Off – Video encoded in 24Hz frame rate will be converted to 60Hz (NTSC) or 50Hz (PAL)  
9. HDMI Options: To configure video options that apply only to the HDMI output. This item  
contains a sub-menu with multiple configuration options. Please refer to the HDMI Options  
section on page 58 of this manual for details of each option.  
10. Display Options: To configure the options for displaying on-screen information. The following  
display options are available:  
Subtitle Shift – To set the display position for subtitles. When the “Subtitle Shift” is set at 0  
(default), subtitles are displayed at the original position as specified on the disc. When it is  
set at a value between 1 and 5, subtitles are shifted up. When it is set at a value between  
-1 and -5, subtitles are shifted down. This feature is helpful for customers using a 2.35:1  
“Constant Image Height” video projection system. Subtitles can be shifted to the active  
video area so they do not get cut off.  
OSD Position – To set the display position for the on-screen display (OSD). When the  
“OSD Position” is set at 0, the OSD is shown at the top and bottom of the video screen.  
When it is set at a value between 1 and 5, the OSD is shifted towards the center of the  
video screen. Similar to the subtitle shift setting above, the “OSD Position” feature is helpful  
for customers using a 2.35:1 “Constant Image Height” video projection system.  
OSD Mode – To select how long the on-screen display information, such as elapsed or  
remaining time, stays on the TV screen. The available options are:  
Normal – On-screen display information stays on the TV screen until the user cancels it.  
Silent – On-screen display information shows on the TV screen for a few seconds and  
then disappears. The front panel display still maintains the selected display information.  
Remaining – On-screen display information stays on the TV screen until the user  
cancels it. By default displays remaining time instead of elapsed time.  
Angle Mark (on/off) – To turn on/off the display of an angle mark when a DVD or Blu-ray  
Disc with multiple available angles is played. Keeping the angle mark off avoids distraction  
from normal movie watching.  
54  
S E T U P M E N U O P T I O N S  
PIP Mark (on/off) – To turn on/off the display of a Picture-in-Picture mark when a Blu-ray  
Disc with secondary video is played. Keeping the PIP mark off avoids distraction from  
normal movie watching.  
SAP Mark (on/off) – To turn on/off the display of a Secondary Audio Program mark when a  
Blu-ray Disc with secondary video and audio is played. Keeping the SAP mark off avoids  
distraction from normal movie watching.  
Screen Saver – To turn on/off the screen saver function. The screen saver is designed to  
minimize burn-in concerns for plasma and CRT display devices. The available options are:  
On – After about 3 minutes of inactivity, the player will show an animated OPPO logo  
moving on a black background. This allows most areas of the screen to rest and gives  
all areas an equal opportunity to refresh.  
Off – The screen saver will not be activated. Use this option if your TV does not have a  
burn-in issue.  
Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many  
projectors and LCD TVs will go into a standby or sleep mode and turn off their  
projection lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life.  
When you press any button on the OPPO remote control or the player’s front panel, the  
screen saver will be canceled and video output will be restored. If your TV is already in  
standby or sleep mode, you may need to wake up the TV by pressing a button on its  
remote or control panel.  
Picture Adjustment  
Picture Adjustment is a special section of the Video Setup menu. It allows you to fine tune many picture  
control parameters in order to achieve the optimal picture quality and visual result. To use Picture Adjustment,  
press the SETUP button on the remote control to enter the player’s Setup Menu and choose “Video Setup” –  
“Picture Adjustment”, then select the primary video output terminal:  
Picture Adjustment  
Please select your video output  
HDMI 1  
HDMI 2 & Analog  
For information on how to choose your primary video output, please refer to Primary Output on page 52. You  
can use the LEFT/RIGHT ARROW to select your choice, then press the ENTER button to bring up the Picture  
Adjustment menu. Depending on your primary video output, the detailed Picture Adjustment menu can be  
slightly different:  
55  
S E T U P M E N U O P T I O N S  
Picture Adjustment Menu for HDMI 1  
Picture Adjustment Menu for HDMI 2 & Analog  
To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the  
parameter, and use the LEFT/RIGHT ARROW buttons to change its value.  
To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to  
only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons (except the  
Picture Mode, which you will directly see the mode name switches between Mode 1, 2 and 3, and all the  
other parameters are adjusted automatically to the stored value). The reduced menu will be positioned  
near the bottom of the screen.  
Brightness  
0
-16  
+16  
You can continue adjusting the current parameter by pressing the LEFT/RIGHT ARROW buttons. To  
select another parameter, press the UP/DOWN ARROW buttons. Press the ENTER button to return to  
the large Picture Adjustment menu.  
To exit the Picture Adjustment menu and return to the Setup Menu, either select “Exit” or press the  
RETURN button.  
The following picture adjustment controls are available for all HDMI 1, HDMI 2 and Analog (Component):  
1. Picture Mode: To use the customized picture mode saved by you. BDP-93 allows you to save  
up to three (3) customized modes. Press the LEFT/RIGHT ARROW buttons to switch the mode  
and all parameters will be automatically adjusted to their stored values. Changes to the current  
parameter values will be stored automatically when you exit the Picture Adjustment screen or  
switch to another Picture Mode.  
2. Brightness: To adjust the brightness (black level) of the video output.  
3. Contrast: To adjust the contrast (white level) of the video output.  
NOTE  
Proper brightness and contrast settings are necessary for a quality video output. If you do not  
have the correct black and white levels, your images can appear washed out or can lose  
detail in shadows when watching darker scenes. Televisions have brightness (black level)  
and contrast (white level) controls; however it may require a combination of tweaking both the  
56  
S E T U P M E N U O P T I O N S  
player and your television to get the optimal result. We recommend using a calibration disc  
such as the Spears & Munsil™ High Definition Benchmark Blu-ray Edition or Digital Video  
Essentials HD Basics as aids for adjusting. First adjust the television’s picture controls for  
the best possible picture. Once that is done, try changing the player’s settings to further  
refine the picture to the optimal result.  
4. Hue: To adjust the hue (tint) of the video output.  
5. Saturation: To adjust the saturation (color intensity level) of the video output.  
6. Sharpness: To set the sharpness of video output. Sharpness (also called Detail/Edge  
Enhancement in previous OPPO players) is a video processing function that can control the  
image sharpness but at the same time may cause unwanted artifacts.  
For HDMI 1, the sharpness level can be set between -16 and +16. The default is level 0, which  
turns off sharpness enhancement. The negative levels may be used to reduce or eliminate  
overly sharpened video. However, the picture may appear soft. The positive levels increase  
the sharpness.  
z
At level 1, the player applies low level Detail Enhancement, during which the video  
processor isolates the detailed parts from the original image, processes them separately  
and integrates back before the final output.  
z
z
At level 2, the player increases Detail Enhancement to a higher level. Generally, to make  
an image “sharper”, we recommend using level 1 and 2.  
At level 3 and above, the player adds Luminance Transition Improvement (LTI) and  
Chroma Transition Improvement (CTI), which further sharpen the luminance transition and  
chroma transition. However, we do not recommend using level 3 and above unless the  
source content is poorly produced and blurry.  
For HDMI 2 & Analog, the sharpness level can be set between 0 and +2. The default is level  
0. The higher the level, the sharper the video details are. However, too high a sharpness level  
may cause while line etching around objects.  
7. Noise Reduction: To select whether the player shall apply video noise reduction processing.  
For HDMI 1, the noise reduction level can be set between 0 and 8. The default is level 0,  
which turns off noise reduction.  
z
When set to level 1, the player adjusts the picture quality by reducing the “mosquito noise”  
(artifacts around the outlines of objects) and “block noise” (mosaic-like patterns caused by  
video compression). These two noise reduction are also called Compression Artifacts  
Reduction (CAR) and have several levels of aggressiveness.  
z
When set to level 2, the player applies the Motion Adaptive Video Noise Reduction (VNR),  
which handles the random noise and the film-grain noise (natural variation of picture  
intensity caused by film grain). Its level is automatic because there is a noise estimator  
circuitry in the video processor that calculates how much noise presents and adjusts the  
level of VNR accordingly.  
z
z
z
When set to 3 or 4, the player applies both CAR and Motion Adaptive VNR, with more  
aggressive “block noise” reduction at level 4.  
At level 5, the player applies aggressive CAR for low quality video content, and adds  
Motion Adaptive VNR at level 6.  
At level 7, the player applies the most aggressive CAR for very low quality video, and  
adds Motion Adaptive VNR at level 8.  
57  
S E T U P M E N U O P T I O N S  
Remember that excessive noise reduction may cause a loss of details. We recommend  
using the noise reduction function only when you encounter poorly encoded or compressed  
video that has apparent noise artifacts.  
For HDMI 2 & Analog, the noise reduction level can be set between 0 and +3. The default is  
level 0. When user increases the level, the player adjusts the picture quality by applying  
mosquito noise reduction, random noise reduction and MPEG block noise reduction at the  
same time. The higher level user sets, the more aggressive noise reduction functions apply.  
The following picture adjustment controls are only available for HDMI 1 video output:  
8. Color Enhancement: To select the color enhancement level on the video output. This  
enhances certain colors in the spectrum and enables vivid colors in outdoor scenes without  
causing hue shifts, loss of detail or changes in skin tones.  
9. Contrast Enhancement: To select the contrast enhancement level on the video output. This  
expands detail in shadows.  
HDMI Options  
HDMI Options are a sub-menu of the Video Setup menu. It allows you to configure some video settings that  
are unique to the HDMI output. To enter this sub-menu, select “HDMI Options” from the Video Setup menu.  
To exit this sub-menu, press the RETURN button or the LEFT arrow key. The following HDMI options are  
available:  
1. Color Space (HDMI 1) – To select the color space for the HDMI 1 output. The available  
options are:  
Auto (Recommended) – The player checks with the display device to automatically  
determine what color space to use. If the display device supports YCbCr 4:4:4, then it will  
be used to avoid extra color space conversion.  
RGB Video Level – The HDMI output uses RGB color space and normal signal range  
suitable for video displays.  
RGB PC Level – The HDMI output uses RGB color space and expands the signal range.  
The expanded signal range is suitable for personal computer (PC) displays. Some TVs are  
designed to be used as a PC monitor, and expect signal in expanded RGB range when the  
DVI input is selected. For these displays if the video signal uses the normal RGB range, the  
black-white contrast will be reduced. You can set the player to use the RGB PC Level  
output and restore proper contrast.  
YCbCr 4:4:4 – The HDMI output uses YCbCr 4:4:4 color space.  
YCbCr 4:2:2 – The HDMI output uses YCbCr 4:2:2 color space. Generally this is the color  
space that is closest to the color space encoded on the discs. (All discs are encoded in  
YCbCr 4:2:0 color space, and the video decoder decodes it into YCbCr 4:2:2.)  
2. Color Space (HDMI 2) – To select the color space for the HDMI 2 output. The available  
options are the same as those for Color Space (HDMI 1).  
3. Deep Color (HDMI 1) – To select the Deep Color mode for the HDMI 1 output. Deep Color is  
an OPTION for some TVs or projectors that feature HDMI v1.3 or higher input. Normally, each  
pixel of the video image is transmitted using 24-bit data (8-bit per channel for R, G, B or Y, Cb,  
Cr). If Deep Color is supported, each pixel of the video image can be transmitted using 30-bit  
(10-bit per channel) or 36-bit (12-bit per channel) data. The increased bit depth should result in  
smoother color transitions and better gradients. The available options are:  
58  
S E T U P M E N U O P T I O N S  
36 Bits – Use the 36-bit per pixel Deep Color mode.  
30 Bits (Dithered) – Use the 30-bit per pixel Deep Color mode with dithering technique.  
30 Bits – Use the 30-bit per pixel Deep Color mode.  
Off (Dithered) –Do not use Deep Color, but apply the dithering technique.  
Off (default) – Do not use Deep Color.  
4. Deep Color (HDMI 2) – To select the Deep Color mode for the HDMI 2 output. The available  
options are the same as those for HDMI Deep Color (HDMI 1).  
NOTE  
Since the Deep Color feature is OPTIONAL and may not be supported by all TVs, enabling  
Deep Color while connected to a TV without this feature may result in no effect or no video.  
At this time, no disc is encoded with Deep Color. Enabling Deep Color will not magically  
make colors richer, but will help preserve the maximum precision as a result of video  
processing and picture control adjustment.  
Dithering is a technique to improve the image color depth with limited color quantization.  
5Demo Mode – To enable a special split-screen demonstration mode. This is designed for the  
demonstration of the Qdeo video processing technology. It can also be used as an aid for  
setting picture control adjustments for Noise Reduction, Color Enhancement and Contrast  
Enhancement. It should NOT be used for normal movie watching. The available options are:  
On – The video screen will be split in half. The left side shows video without the help of  
Qdeo video processor, and the right side shows the Qdeo video processing result.  
Off (default) – Normal viewing mode.  
NOTE  
The demo mode is canceled automatically after the player is turned off.  
6Video Only (HDMI 1) – To choose whether only send video signal (no audio signal) to HDMI 1  
terminal or not. The available options are:  
No (default) – Both video and audio signals are sent to HDMI 1 terminal.  
Yes – Only video signal is sent to HDMI 1 terminal. This can be useful if you use HDMI 1  
only for video display, no need to lower the volume or mute the HDTV connecting to it.  
59  
S E T U P M E N U O P T I O N S  
Audio Format Setup  
The “Audio Format Setup” section of the Setup Menu system allows you to configure preferences for audio  
output formats. The menu items in this section are:  
Setup Menu  
Playback Setup  
Video Setup  
Secondary Audio  
HDMI Audio  
Off  
LPCM  
LPCM  
192k  
PCM  
On  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
Coaxial/Optical Output  
LPCM Rate Limit  
SACD Output  
HDCD Decoding  
Set the secondary audio program mixing option  
Exit  
1. Secondary Audio: To set the Secondary Audio Program mixing option. Some Blu-ray Discs  
contain a secondary audio and video program, such as the director’s commentary. Some Blu-  
ray Discs have a sound effect when you make menu choices. This Setup Menu item allows you  
to decide whether to mix the Secondary Audio Program and menu clicking sound into the  
primary audio. The options are:  
On – The Secondary Audio Program and menu clicking sound are mixed into the primary  
audio. Usually this will cause the primary audio volume to be slightly reduced.  
Off – The Secondary Audio Program and menu clicking sound are not mixed into the  
primary audio and you cannot hear the secondary audio or menu clicking sound. This  
setting preserves the highest possible audio quality for the primary audio.  
2. HDMI Audio: To select digital audio output format from the HDMI port. The options are:  
Auto (default) The player checks with the device connecting to HDMI output to  
automatically determine which audio format to use.  
LPCM – Digital audio output via HDMI will be multi-channel Linear PCM format. When this  
option is selected, compressed audio bit streams will be decoded by the player. This  
setting is recommended when connecting the HDMI output directly to a TV or to a receiver  
without advanced audio decoding capabilities.  
Bitstream – Digital audio output via HDMI will be in bitstream format. This option is  
recommended when connecting the HDMI output to an A/V receiver or processor that  
supports advanced audio decoding, such as Dolby TrueHD and DTS-HD Master Audio.  
Off – No digital audio output via HDMI.  
NOTE  
If you use HDMI to connect audio to an HDMI A/V receiver or audio processor, it is important  
that you choose 720p or higher HDMI output resolution when playing high resolution audio  
content (DVD-Audio, SACD, Dolby TrueHD and DTS-HD Master Audio). According to the HDMI  
specification, the bandwidth available for audio is proportional to the total bandwidth used by  
60  
S E T U P M E N U O P T I O N S  
video. At 480p/576p resolution, the HDMI specification can only support 2 channels of audio  
with high sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to  
48kHz). If you play high resolution audio content at the 480p/576p resolution, you may get  
reduced audio resolution, incomplete audio channels, or even no audio/video output at all.  
Choosing a higher output resolution such as 720p or above allows enough bandwidth for all  
high sample rate audio channels.  
3. Coaxial/Optical Output: To set the output format for the coaxial/optical digital audio output for  
use with Dolby Digital and DTS-compatible receivers. The options are:  
LPCM – Forces down-mixed 2-channel digital audio output. Choose this setting if your  
receiver/amplifier only supports stereo digital (PCM) audio.  
Bitstream – Passes audio as compressed bitstream format to the receiver/amplifier. Choose  
this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.  
4. LPCM Rate Limit: To set the maximum Linear PCM output frequency for the coaxial/optical digital  
output. This menu item is intended to ensure that the audio output is compatible with equipment  
that cannot support high sample rates. It sets an upper limit to decide whether the player shall  
down-sample audio. The player does not up-sample audio to higher sample rates. The options  
are:  
48K – Supported by most equipment.  
96K – Allows a higher sampling rate and frequency response. It can result in better audio  
quality. Ensure that the receiver/amplifier can support it.  
192K (default) – Allows the highest sampling rate and frequency response. It can result in the  
best audio quality. Ensure that the receiver/amplifier can support it.  
NOTE  
On the BDP-93, the “LPCM Rate Limit” can also affect the analog audio performance. Setting to  
“192K” may help to get the best analog audio quality.  
5. SACD Output: To select audio output format for SACD. The options are:  
PCM – SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-  
resolution PCM data. The converted PCM data is then output through HDMI or the internal  
DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver that  
supports HDMI v1.1 to listen to SACD, please select this option. You may also want to select  
this option if you prefer the sound quality of the DSD-to-PCM conversion.  
DSD – SACD DSD data is output over HDMI without any conversion. For the analog audio  
outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a  
receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of  
straight DSD to analog, please select this option.  
6. HDCD Decoding: To set the audio decoding option for HDCD (High Definition Compatible Digital)  
discs. The options are:  
On – HDCD is decoded by the player. You can enjoy expanded dynamic range and improved  
audio resolution.  
61  
S E T U P M E N U O P T I O N S  
Off – HDCD is treated as regular CD. This is useful when the player is connected to an  
HDCD-capable A/V receiver via a digital audio output link (Coaxial, Optical, or HDMI) so the  
A/V receiver can perform HDCD decoding.  
NOTE  
If your receiver is capable of HDCD decoding, it is recommended to set the “HDCD  
Decoding” to “Off” on the BDP-93, otherwise you might occasionally hear pop or crackle  
sounds during the HDCD playback.  
62  
S E T U P M E N U O P T I O N S  
Audio Signal Reference Chart  
Blu-ray Discs may contain many types of audio signal formats, some of which are high resolution types such  
as Dolby TrueHD and DTS-HD Master Audio. Blu-ray Discs also have many optional audio components such  
as the Secondary Audio Program and menu clicking sound. The player’s Audio Format Setup menu allows  
you to configure the audio output to meet your specific preference. The following chart provides a reference to  
what type of audio signal can be expected.  
When “Secondary Audio” is set to “Off”:  
Output Ports  
Setting  
Source  
HDMI Output  
Coaxial/Optical Output  
Analog Multi-  
Channel  
Output  
Bitstream  
LPCM  
Bitstream  
LPCM  
Format  
LPCM 2ch  
LPCM 5.1ch  
LPCM 7.1ch  
Dolby Digital  
LPCM 2ch  
LPCM 5.1ch  
LPCM 7.1ch  
LPCM 2ch  
LPCM 5.1ch  
LPCM 7.1ch  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
Dolby Digital  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
2ch  
5.1ch  
7.1ch  
5.1ch  
Dolby Digital LPCM 5.1ch  
Dolby Digital Dolby Digital  
LPCM up to 7.1ch  
Dolby Digital  
LPCM 2ch  
Up to 7.1ch  
Plus  
Plus  
Dolby  
TrueHD  
DTS  
LPCM up to 192kHz  
24-bit 7.1ch  
LPCM up to 7.1ch  
Dolby TrueHD  
DTS  
Dolby Digital  
DTS  
LPCM 2ch  
LPCM 2ch  
Up to 7.1ch  
Up to 7.1ch  
DTS-HD  
High  
Resolution  
DTS-HD High  
Resolution  
LPCM up to 7.1ch  
DTS (core)  
LPCM 2ch  
LPCM 2ch  
Up to 7.1ch  
Up to 7.1ch  
LPCM up to 96kHz  
DTS-HD  
Master Audio  
DTS-HD  
Master Audio  
24-bit  
7.1ch  
or DTS (core)  
192kHz 24-bit 2ch  
When “Secondary Audio” is set to “On” and the player encounters a disc with secondary audio track or menu  
clicking sound:  
Output Ports  
Setting  
Source  
HDMI Output  
Coaxial/Optical Output  
Analog Multi-  
Channel  
Output  
Bitstream  
LPCM  
Bitstream  
LPCM  
Format  
LPCM 2ch  
LPCM 5.1ch  
LPCM 7.1ch  
Dolby Digital  
Dolby Digital  
Plus  
DTS* 2ch  
DTS*  
DTS*  
LPCM 2ch  
DTS*  
DTS*  
DTS*  
DTS*  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
2ch  
LPCM 5.1ch  
LPCM 7.1ch  
LPCM 5.1ch  
5.1ch  
7.1ch  
5.1ch  
DTS*  
DTS*  
LPCM up to 7.1ch  
DTS*  
LPCM 2ch  
Up to 7.1ch  
LPCM up to 192kHz  
24-bit 7.1ch  
LPCM up to 7.1ch  
Dolby TrueHD DTS*  
DTS*  
DTS*  
DTS*  
LPCM 2ch  
LPCM 2ch  
LPCM 2ch  
Up to 7.1ch  
Up to 7.1ch  
Up to 7.1ch  
DTS  
DTS*  
DTS*  
DTS-HD High  
Resolution  
DTS-HD  
LPCM up to 7.1ch  
LPCM up to 7.1ch  
DTS*  
DTS*  
LPCM 2ch  
Up to 7.1ch  
Master Audio  
Note: All audio output signals are mixed with primary, second audio and menu clicking sound. DTS* denotes  
mixed audio re-encoded into DTS bitstream format.  
63  
S E T U P M E N U O P T I O N S  
Recommended Audio Format Options  
Depending on your specific audio/video connection method, the audio format options of the OPPO Blu-ray  
Disc Player may need to be adjusted to match your configuration. Please refer to the video and audio  
connection methods described previously in this guide and the following audio setup guidelines.  
Audio Connection Directly to TV  
If the player is connected directly to the TV through HDMI (as described in “Method 1” on page 10), through  
DVI and analog L/R audio cables (as described in “Method 2” on page 11), or through component video and  
analog L/R audio cables (as described in “Method 3” on page 13), it is recommended that you use the  
following audio format options:  
o
o
o
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
On  
LPCM  
PCM  
On  
(any – not in use)  
(any – not in use)  
Multi-Channel Digital Audio to Receiver through HDMI  
If the player is connected to an A/V receiver or processor with HDMI inputs for high resolution multi-channel  
digital audio, you are in luck! You are now equipped to send all current audio formats to your receiver in pure  
digital form. This connection method will typically be as described in “Method 4” on page 14 of this guide.  
To get the best possible audio via HDMI, you may need to set the following options on the player’s  
audio format Setup Menu, depending on the capabilities of your HDMI-capable receiver:  
If your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio  
formats such as Dolby TrueHD and DTS-HD Master Audio, please set these audio format  
options:  
o
o
o
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
Off (or On if you need secondary audio)  
Bitstream  
PCM (or DSD if the receiver supports DSD over HDMI)  
On (or Off if the receiver can decode HDCD)  
(any – not in use)  
(any – not in use)  
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but not high resolution  
lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio, please set these  
audio format options:  
o
o
o
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
Off (or On if you need secondary audio)  
LPCM  
PCM (or DSD if the receiver supports DSD over HDMI)  
On (or Off if the receiver can decode HDCD)  
(any – not in use)  
(any – not in use)  
In this configuration you can enjoy all audio formats using the HDMI connection.  
64  
S E T U P M E N U O P T I O N S  
Multi-Channel Analog Audio to Receiver  
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analog audio jacks using 8 or 6 RCA  
cables (as described in “Method 5” on page 15), you can play all supported audio formats and listen to them  
with your A/V receiver and surround sound systems. The following audio format setup options are  
recommended:  
o
o
o
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
audio quality)  
Off (or On if you need secondary audio)  
Off  
PCM or DSD (depending on your listening preference)  
On  
(any – not in use)  
(any – set to 192k may help to get the best analog  
Also set Speaker Configuration in the “Audio Processing” menu:  
Set Down Mix to “7.1Ch” or “5.1Ch”.  
Set the speaker size and subwoofer properly according to your actual audio hardware. (see  
page 66)  
Enable or select the multi-channel analog inputs on your receiver  
Coaxial or Optical Digital Audio to Receiver  
If your audio connection is as described in “Method 6” on page 16 of this guide, and the A/V receiver supports  
Dolby Digital and DTS decoding, the following audio format setup options are recommended:  
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
Off (or On if you need secondary audio)  
Off  
(any – SACD is not available through the  
optical/coaxial output)  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
o
o
o
On (or Off if the receiver can decode HDCD)  
Bitstream  
48k (or higher if supported by the receiver)  
Stereo Analog Audio to Receiver  
If you primarily listen to stereo contents or your receiver only offers stereo audio connections, please use the  
analog RCA-style cables to connect the FL (Front Left) and FR (Front Right) terminals of the player to your  
receiver, as described in “Method 7” on page 17 of this guide. The following audio format options are  
recommended:  
o
o
o
o
o
o
Secondary Audio:  
HDMI Audio:  
SACD Output:  
HDCD Decoding:  
Coaxial Optical Output:  
LPCM Rate Limit:  
audio quality)  
Off (or On if you need secondary audio)  
Off  
PCM or DSD (depending on your listening preference)  
On  
(any – not in use)  
(any – set to 192k may help to get the best analog  
65  
S E T U P M E N U O P T I O N S  
Audio Processing Setup  
The “Audio Processing Setup” section of the Setup Menu system allows you to configure how the player will  
process audio signals before sending them to the output.  
Setup Menu  
Playback Setup  
Video Setup  
Speaker Configuration  
Crossover Frequency  
Dynamic Range Control  
80Hz  
Auto  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
Configure speaker arrangement for the analog audio output  
Exit  
Speaker Configuration  
In the Speaker Configuration menu you can configure speaker settings such as down-mix mode,  
number of speakers, their distance, size and trim level. The Speaker Configuration menu shows an  
illustration of the speaker placements to assist you on properly configuring the speaker parameters.  
Upon entering this menu, the cursor is positioned on the front left speaker. You may use the  
LEFT/RIGHT ARROW buttons to move the cursor. The RIGHT ARROW button moves the cursor in  
clockwise sequence, and the LEFT ARROW button moves the cursor in counterclockwise sequence.  
When the cursor is over the “Down Mix”, “Test Tone” or “Exit” options, you can also use the UP/DOWN  
ARROW button to highlight these options.  
Speaker Configuration  
Front Left Speaker  
FL  
FR  
C
SW  
Size:  
Large  
12ft  
SR  
SL  
Distance:  
Trim:  
0.0dB  
SBL  
SBR  
Next Speaker  
Exit  
Test Tone  
Down Mix Mode: 7.1Ch  
Test Tone : Off  
Configure the front left speaker  
Exit  
NOTE  
66  
S E T U P M E N U O P T I O N S  
Speaker Configuration applies to the multi-channel analog audio outputs only. All digital  
bitstream and LPCM outputs are unaffected by these settings.  
Down Mix Mode  
Down mix is the process of converting multi-channel audio to a lesser number of channels. For  
example, converting a 5.1ch source to stereo or converting a 7.1ch source to 5.1ch. Down mixing  
allows the audio output from the player to match the exact number of speakers available in your home  
theater.  
The current down mix mode is displayed in the lower right corner of the speaker placement illustration.  
To change the audio down mix setting, press the ENTER button while the cursor is over the “Down Mix”  
option. The following down mix modes are available:  
Speaker Configuration  
Down Mix  
FL  
FR  
C
SW  
LT/RT  
Stereo  
5.1Ch  
7.1Ch  
SR  
SL  
SBL  
SBR  
Test Tone : Off  
Down Mix Mode: 7.1Ch  
Choose down mix mode  
Exit  
LT/RT – Left Total/Right Total. The center and surround channels are mixed into the two front  
channels according to the LT/RT matrix. A Dolby Pro Logic receiver will decode the two-  
channel audio into surround audio.  
Stereo - This mode down-mixes multi-channel audio to 2-channel stereo output. For original  
stereo content the output will not change. For original multi-channel content the surround and  
center channels will be mixed with the left and right front channels. Recommended for use with  
TV sets or stereo receiver/amplifiers.  
5.1Ch – This mode enables 5.1ch decoded audio output. The number of actual output  
channels depends on the disc. If the source content has more channels, the surround back  
channels will be mixed into the surround channels.  
7.1Ch – This mode enables 7.1ch decoded audio output. The number of actual output  
channels depends on the disc. For 6.1ch contents, the left and right surround back speakers  
will both output the same surround back audio channel.  
Test Tone  
Test tone is a special group of artificially-created sounds that are used to test your audio speaker system and  
help to identify any wiring faults. By default the Test Tone is set to “Off”, with the status displayed in the lower  
left corner of the screen.  
67  
S E T U P M E N U O P T I O N S  
To begin the test, press the ARROW buttons to highlight the “Test Tone” option, press the Enter button to  
change the test tone status to “On”. Then press ARROW buttons to select a speaker, you will hear the test  
sounds. To stop the test process, press ARROW buttons to highlight the “Test Tone” option and press the  
Enter button to switch the status back to “Off”. Please note these test tones only apply on multi-channel audio  
outputs.  
Speaker Settings  
For each speaker in the home theater system, you can set its size, distance and trim level. To configure  
a speaker, use the LEFT/RIGHT ARROW buttons to move the cursor to highlight the speaker and press  
the ENTER button. The Speaker Settings menu on the right side of the screen will be activated. In the  
Speaker Settings menu, use the UP/DOWN ARROW buttons to select a parameter, and then press the  
ENTER button to change it. To exit the Speaker Settings menu and return to the Speaker Configuration  
illustration, press the LEFT ARROW button or select the “Exit” option. You can also move on to  
configure the next speaker by selecting the “Next Speaker” option.  
Speaker Configuration  
Front Left Speaker  
FL  
FR  
C
SW  
Size:  
Large  
12ft  
SR  
SL  
Distance:  
Trim:  
0.0dB  
SBL  
SBR  
Next Speaker  
Exit  
Test Tone  
Down Mix Mode: 7.1Ch  
Configure the front left speaker  
Test Tone : Off  
Exit  
The following speaker parameters can be configured:  
1. Size: The speaker size parameter sets bass filtering control for the speakers. The options are:  
Large – Bass frequencies are passed to the speakers. The bass frequency is set in the  
“Crossover Frequency” option of the “Audio Processing” section of the Setup menu (see page  
70 for details).  
Small – Bass frequencies are not passed to the speakers to reduce possible distortion. If the  
subwoofer is available, bass frequencies are redirected to the subwoofer.  
On (for subwoofer only) – Specify that a subwoofer is available.  
Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is  
redirected to other speakers or discarded if redirection is not possible.  
NOTE  
The front, surround and surround back speakers are configured as pairs. Changes to the  
size of one speaker will automatically change the other speaker of the pair.  
68  
S E T U P M E N U O P T I O N S  
2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.  
The delay is to compensate for the audio propagation time difference caused by the placement of  
speakers.  
Speaker distance compensation is not required if the A/V receiver has the capability to adjust  
channel delay and compensate for speaker distance differences. However, if your receiver does  
not have such functions (most receivers do not offer these functions for their multi-channel analog  
input), you may adjust them through the player. Speaker distance delay is only applied if the player  
is decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the  
bitstream audio is not adjusted for speaker distance delay.  
Since the delay is calculated based on the distance difference from each speaker to the listener’s  
position, it is important to set the distance for the front speakers first and then the other  
speakers. Any time you change the distance of the front speakers, the distance of the other  
speakers will be automatically adjusted to maintain the same distance difference.  
FL  
FR  
C
SW  
2
Distances:  
Speaker Icons:  
1
1 - Listener to Front  
2 - Listener to Center  
3 - Listener to Surround Left  
FL - Front Left  
FR - Front Right  
C - Center  
SW - Subwoofer  
SR  
SL  
3
SL - Surround Left  
SR - Surround Right  
SBL - Surround Back Left  
SBR - Surround Back Right  
SBL  
SBR  
For example, in the above diagram, measure the distance (in feet) from the primary listening  
position to the Front Left or Front Right Speaker. Your Front Right and Left speakers should  
measure the same distance. If they do not, please adjust them if possible. Enter the distance of the  
Front Speakers (n in the above picture) into the “Speaker Configuration” menu.  
Next, measure the distance (in feet) from center speaker (o) to the listening position. Move the  
cursor to highlight the Center speaker in the Channel Delay setup page, and enter the distance (as  
close as possible) in feet. Repeat for each speaker in the system (Center, Surround Left, Surround  
Right, Surround Back Left, Surround Back Right and Subwoofer) as available. The player will insert  
appropriate delay to the center, subwoofer and surround channels to make sure sound waves from  
different speakers arrive at the listener at the same time.  
Distance between the surround speakers and the listener must be shorter than or equal to that  
between the front speakers and the listener.  
If the channel delay settings cannot match your speaker configuration, please set all distances to  
the same and use your receiver/amplifier to set the channel delay.  
NOTE  
The front, surround and surround back speakers are configured as pairs. Changes to the  
distance of one speaker will automatically change the other speaker of the pair.  
69  
S E T U P M E N U O P T I O N S  
Example Channel Delay Adjustment:  
Supported Configuration  
Unsupported Configuration  
14ft  
12ft  
12ft  
18ft  
10ft  
12ft  
10ft  
12ft  
14ft  
9ft  
9ft  
18ft  
8ft  
8ft  
16ft  
16ft  
Settings:  
Settings:  
Front Speakers – 12ft  
Center Speaker – 10ft  
Subwoofer – 10ft  
Front Speakers – 12ft  
Center Speaker – 12ft  
Subwoofer – 12ft  
Surround Left – 9ft  
Surround Right – 9ft  
Surround Left – 12ft  
Surround Right – 12ft  
Surround Back Left – 8ft  
Surround Back Right – 8ft  
Surround Back Left – 12ft  
Surround Back Right – 12ft  
3. Trim Level: The speaker trim level parameters sets the volume of each individual channel.  
Channel trim is generally not required since most A/V receivers have the capability to adjust  
channel trim and compensate for speaker sensitivity differences. However, if your receiver does not  
have such functions (many receivers do not support channel trim for their multi-channel analog  
inputs), you may adjust channel trim through the player. For most accurate results, it is  
recommended that you use test tones from a calibration disc, such as Digital Video Essentials HD  
Basics, and a SPL (Sound Pressure Level) meter. The trim level can be set to +/- 10dB in 0.5dB  
increments.  
Other Audio Processing Settings  
In addition to Speaker Configuration, Crossover Frequency and Dynamic Range Control are audio  
processing settings that can be configured:  
1. Crossover Frequency: To set the Bass Management kick-in frequency for all speakers. When the  
speaker size is set to “Small” in “Speaker Configuration” (see page 68), bass information below this  
frequency are not passed to the speakers to reduce possible distortion, and if the subwoofer is  
available, bass information will be redirected to the subwoofer. The available options are:  
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz – These are  
the available crossover frequencies. You can press the UP/DOWN ARROW buttons and  
the ENTER buttons to select it. This option applies to all speakers (center, front, surround,  
and surround back speakers). By default the crossover frequency is 80Hz.  
70  
S E T U P M E N U O P T I O N S  
2. Dynamic Range Control: To set the Dynamic Range Compression (DRC). DRC can smooth out  
the sonic peaks and valleys common with wide-range digital audio. Enabling DRC may make low  
level audio more audible during low-level listening. Turning off DRC restores the sonic energy  
present in the original recording. The available options are:  
Auto – Play at the dynamic range specified by the disc. This option applies to Blu-ray  
Discs only. For other disc types no dynamic range compression is applied.  
On – Turn on dynamic range compression.  
Off – Turn off dynamic range compression.  
NOTE  
The Dynamic Range Compression is applied on the analog audio output, it also works on the  
digital audio output (HDMI, Coaxial and Optical) when the audio format is set to PCM.  
71  
S E T U P M E N U O P T I O N S  
Device Setup  
The “Device Setup” section of the Setup Menu system allows you to configure additional player options related  
to the hardware and control functions. The menu items in this section are:  
Setup Menu  
Playback Setup  
Video Setup  
Firmware Information  
Firmware Upgrade  
Firmware Notification  
Remote Control Code  
HDMI CEC  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
On  
Code 1  
Off  
Front Panel Display  
Persistent Storage  
Standard  
View current firmware version and system information  
Exit  
1. Firmware Information: To display the currently installed firmware version.  
2. Firmware Upgrade: To upgrade the player’s firmware. This operation is only available when the  
playback is completely stopped or when there is no disc loaded.  
The firmware is the system software that controls the features and functions of the player. Since  
the Blu-ray Disc specifications are new and evolving, it is possible that a Blu-ray disc manufactured  
after the player was manufactured uses certain new features of the Blu-ray Disc specifications. To  
ensure the best possible viewing experience, the player may need a firmware update from time to  
time. Please visit the OPPO Digital web site www.oppodigital.com to check for firmware updates  
and instructions on installing the updates.  
There are three ways to upgrade the player’s firmware. The options are:  
Via USB – You may download the firmware files from the OPPO Digital web site to a USB  
drive and then use the USB drive to upgrade the player. Please follow the instructions on  
the firmware download web page.  
Via Disc – You may requests a firmware upgrade disc from OPPO Digital or download a  
disc image from the OPPO Digital web site and burn an upgrade disc. Please follow the  
instructions that come with the upgrade disc.  
Via Network – If the player has a working Internet connection (see page 18 and 75), you  
may upgrade the player directly over the Internet. Please follow the instructions on your TV  
screen.  
3. Firmware Notification: To set whether the player should automatically check if new firmware  
versions are available on the Internet server and notify the user about new firmware. The options  
are:  
On – Check for new firmware version automatically and notify the user about new firmware.  
Requires a working network connection.  
Off – Do not check for new firmware version automatically.  
4. Remote Control Code: The OPPO BDP-93 Blu-ray Disc Player can respond to one of 4 sets of  
remote control codes. The default is “Code 1”. If you have other OPPO products placed close to the  
72  
S E T U P M E N U O P T I O N S  
BDP-93, the other products may respond to the BDP-93 remote control. In this case you can select  
a different remote code to avoid conflicts. The available codes are:  
Code 1 – OPPO disc player remote code set 1. This is the default remote code.  
Code 2 – OPPO disc player remote code set 2. Use this code if you have other OPPO  
products placed close to the BDP-93.  
Code 3 – OPPO disc player remote code set 3. Use this code if you have other OPPO  
products placed close to the BDP-93.  
Alt. Code – Alternative remote code. The alternative remote control code enables users to  
program their universal remote controls that come with TV, projector or A/V receiver to  
operate the OPPO player. If the universal remote control has a DVD player control function,  
please program it with the code for TOSHIBA, PHILIPS, MAGNAVOX, MARANTZ or  
ZENITH DVD players. Since each brand of remote control may have several sets of codes,  
you may need to try several times using different codes to find a working code.  
If you have selected a new remote code, you must set the remote control handset to use the same code.  
Please refer to the Changing the Remote Code section on page 9 of this manual for details. If you have  
selected “Alt. Code”, the supplied handset will not operate the player, and you must use a universal  
remote control with the properly configured code set.  
5. HDMI CEC: To set HDMI Consumer Electronics Control (CEC) mode. CEC is an optional HDMI  
feature that enables convenient remote control and automatic setup of consumer electronics over  
the HDMI connection. The remote control function allows you to use a single remote handset to  
operate multiple devices connected via HDMI. For example, you may use the TV remote to control  
playback of the Blu-ray Disc player. The automatic setup function can automatically turn on the TV  
and change to the proper input when you start playing a disc in the Blu-ray Disc player. It can also  
turn off the player automatically when you turn off the TV. The implementation and compatibility of  
this feature varies by device manufacturer. Each may only implement part of the features or add  
their own proprietary functions. The manufacturer-specific implementation of the HDMI CEC  
function is often given a proprietary name of “…Link” or “…Sync”. The OPPO BDP-93 Blu-ray Disc  
Player provides three HDMI CEC function modes for each of its HDMI outputs:  
HDMI 1 – HDMI CEC is enabled on HDMI 1 output. Use this mode if your other devices are  
compatible with the player.  
HDMI 1 (Limited) – HDMI CEC is enabled on HDMI 1 output, but the BDP-93 will only  
respond to playback control commands. It will not respond or issue power on/off and input  
selection commands. Use this mode if you do not want the automatic setup function to turn  
on/off your devices.  
HDMI 2 – HDMI CEC is enabled on HDMI 2 output. Similar to HDMI 1.  
HDMI 2 (Limited) – HDMI CEC is enabled on HDMI 2 output, but the BDP-93 will only  
respond to playback control commands. Similar to HDMI 1 (Limited).  
Off (default) – HDMI CEC feature is turned off on both HDMI output terminals. The player  
will not respond to HDMI CEC commands from other devices, nor will it setup other devices  
automatically.  
6. Front Panel Display: To control the display intensity of the front panel Vacuum Fluorescent Display  
(VFD) information windows. If you feel that the display becomes a distraction to your enjoyment of  
the video, this option allows you to dim it or turn it off. The available options are:  
Full - The VFD windows (both left and right sides) are at full brightness for all displays.  
73  
S E T U P M E N U O P T I O N S  
Standard (default) - The VFD windows are at full brightness. The right side window is  
automatically turned off after 30 seconds, and resume momentarily if there is any user  
operation.  
Dim - The VFD windows are at reduced brightness. The right side window is automatically  
turned off after 10 seconds, and resumes momentarily if there is any user operation.  
Off – The VFD windows are turned off. In this mode the display will resume momentarily if  
there is any user operation.  
7. Persistent Storage: To manage the persistent storage for BD-Video contents. The persistent  
storage is a data storage area that holds additional contents for BonusView and BD-Live features.  
The data will be kept even if you turn off the player. The following persistent storage management  
options are available:  
Storage Device – To select which storage device should be used as the persistent storage.  
The OPPO BDP-93 preserves about 1GB of internal flash memory that can be used for  
persistent storage. There are also two USB ports on the player that can accept a USB drive to  
be used as the persistent storage. The choices are:  
Internal Flash – Use the internal flash memory for persistent storage.  
USB Drive – Use a USB drive for persistent storage. To meet the specification for BD-Live,  
a USB flash drive of 1GB or larger is required. A USB hard drive is not recommended.  
NOTE  
The new storage device choice becomes effective only after the player is restarted. Please  
make sure that you turn off the player and then turn it back on after changing the “Storage  
Device” option.  
Total Space – To display the total space of the persistent storage.  
Available Space – To display the currently available space of the persistent storage. If the  
available space becomes too low, some Blu-ray Discs may not play properly.  
Erase BD-Video Data – To erase the BD-Video data from the persistent storage.  
8. Netflix: To de-activate your Netflix account. The available options are:  
Netflix ESN – To display the Netflix ESN (Electronic Serial Number) for your player.  
De-activate Netflix – To de-activate the access to your Netflix account from your player. Once  
de-activated, you have to go to the Home menu, enter the Netflix option and go through the  
activation procedure again to be able to access Netflix from your player.  
9. DivX® VOD DRM: To register or de-register your player for DivX® digital right management for  
video on demand. A register or de-register code will be generated and shown.  
10. Easy Setup: Choose this option to bring up the Easy Setup procedure (see details on page 22).  
11. Reset Factory Defaults: To reset all settings to the factory default value. This operation also  
removes any application activation and account information, such as your Netflix and Blockbuster  
accounts. However, the remote control code, parental control password and ratings will not be  
reset. This operation is only available when the playback is completely stopped or when there is no  
disc loaded.  
74  
S E T U P M E N U O P T I O N S  
Network Setup  
The “Network Setup” section of the Setup Menu system allows you to configure the parameters for the  
Internet connection of the player, test the connection and restrict BD-Live access. The menu items in this  
section are:  
Setup Menu  
Connection Information  
BD-Live Network Access  
My Network  
Playback Setup  
Video Setup  
Off  
Audio Format Setup  
Audio Processing  
Device Setup  
Network Setup  
Exit  
On  
Internet Connection  
Wireless Setting  
IP Setting  
Ethernet  
Auto (DHCP)  
Off  
Proxy Setting  
Display connection information  
Exit  
1. Connection Information: To display the current internet connection information, such as  
connection type, IP address, Ethernet MAC, Wireless MAC, etc.  
2. BD-Live Network Access: To restrict BD-Live content access. The available options are:  
On – BD-Live access is permitted.  
Limited – BD-Live access is permitted only for contents that have a valid content owner  
certificate. Internet access is prohibited if the BD-Live contents do not have a certificate.  
This option ensures that you are accessing only authentic content, although it may block  
your access to smaller independent content providers.  
Off (recommended) – BD-Live access is prohibited.  
3. My Network: To set the My Network (in-home media sharing) client option. My Network option  
enables the player to stream audio, video and photo from media servers within the home network.  
The available options are:  
On (default) – Enable the My Network client. A broadband internet connection is required  
(see details on page 19), and the available media servers are listed inside the “My Network”  
option of the Home menu (see details on page 43).  
Off – Disable the My Network client. No media servers will be shown in “My Network”  
option, and a warning message will pop up once you enter the “My Network” option.  
4. Internet Connection: To select the internet connection type. The available options are:  
Ethernet (default) – Connect to the internet through the Ethernet cable. Please refer to the  
connection instructions on page 19. Choosing this will make the “Wireless Setting” option  
gray and un-selectable.  
Wireless – Connect to the internet through the external wireless adaptor. Please refer to  
the connection instructions on page 20. Choosing “Wireless” will start the wireless setting  
procedure, and also make the “Wireless Setting” option in the next row selectable.  
75  
S E T U P M E N U O P T I O N S  
Off – Internet access is prohibited. This will make all the remaining options in Network  
Setup screen gray and un-selectable.  
5. Wireless Setting – To start the wireless setting procedure. The wireless setting procedure can  
be started either by selecting the “Wireless Setting” option, or by selecting “Wireless” in “Internet  
Connection” option. The procedure is described as follows:  
The player first searches for the last successful wireless settings. If they exist, a message  
will pop up to remind you. The available options are:  
Your previous wireless settings have been found  
Do you want to use them or start with new settings?  
Use Previous  
Start New  
Use Previous – To use the last successful wireless setting. A summary of the previous  
wireless settings will pop up showing information like SSID (Service Set Identifier),  
Security Mode and Security Key (in asterisk *).  
SSID  
Security Mode  
Security Key  
Your-SSID  
Your-Mode  
**********  
OK  
Then a connection test will be automatically performed and the test result is shown on  
the screen.  
Start New – To start a new wireless configuration. The BDP-93 supports three wireless  
configuration methods and the available options are:  
Wireless Setting  
Scan  
Manual  
WPS  
Scan for available wireless hot spots  
Scan – To scan for available wireless hotspot. The player automatically scans for  
any available wireless hotspots nearby and the search results are listed in a  
window. You can press the UP/DOWN ARROW buttons to highlight a hotspot then  
press the ENTER button to select it. If this hotspot is secured, you need to input  
the security key using the remote control. Then a connection test will be  
automatically performed and the test result is shown on the screen.  
Manual – To manually set the information for a wireless hotspot. You need to use  
the remote control to input the SSID, select the Security Mode and input the  
Security Key. Then a connection test will be automatically performed and the test  
result is shown on the screen.  
WPS – To start the Wi-Fi Protected Setup. BDP-93 supports the WPS standard to  
provide an easy and secure establishment of a wireless home network. The  
available options are:  
76  
S E T U P M E N U O P T I O N S  
WPS (Wi-Fi Protected Setup)  
PIN (Personal Identification Number)  
PBC (Push Button Connection)  
Please Enter the security PIN shown below into the software control panel of your  
wireless router or access point, then click theNEXTbutton below  
PIN code : Your-PIN  
Next  
Previous  
Refresh  
9
9
PIN – To configure the WPS using a Personal Identification Number. BDP-  
93 will generate a PIN and you need to input it into the software control  
panel of your wireless router or access point. Please follow the on-screen  
instructions.  
PBC - To configure the WPS using Push Button Control. You need to push  
a PBC button on your wireless router or access point to initiate the  
wireless connection. Please follow the on-screen instructions.  
NOTE  
SSID is short for Service Set Identifier. It is an identifier for each wireless router or  
access point, and is also referred as a network name.  
WPS is short for Wi-Fi Protected Setup (WPS). It is the latest standard for easy and  
secure wireless home network configuration. It is also named Wi-Fi Simple Config.  
To use WPS, a WPS compatible router or access point is required.  
6. IP Setting: To determine how the player obtains its IP address. The available options are:  
Auto (DHCP) - The player automatically obtains its IP address information using DHCP  
(Dynamic Host Configuration Protocol). This is the default setting. In most cases,  
automatic IP configuration can be used.  
Manual – Manually enter the numeric IP address information. Set the IP configuration  
manually only when the router has no DHCP server functions or when the router’s DHCP  
server function is disabled. For more information on how to manually configure the Internet  
connection and what values to use, please consult your broadband router/modem  
instruction manuals or call your Internet service provider.  
Internet Connection – Depending on your choice in “Internet Connection” option, this  
can be “Wireless” or “Ethernet”.  
IP Address: The Internet Protocol address of the player. When “IP Setting” is set to  
“Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be  
changed.  
Subnet Mask: Each IP address has an associated subnet mask. It is used by the  
player to decide whether to route network traffic through the router or directly to another  
device on the same network. When “IP Setting” is set to “Auto (DHCP)”, the value  
displayed here is obtained using DHCP and cannot be changed.  
Gateway: The IP address of the router. It is also called “default gateway” or “default  
router”. When IP Setting” is set to “Auto (DHCP)”, the value displayed here is  
obtained using DHCP and cannot be changed.  
77  
S E T U P M E N U O P T I O N S  
DNS 1: The IP address of the first (primary) DNS (Domain Name System) server. DNS  
is the mechanism to translate human-readable addresses (such as  
(DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.  
DNS 2: The IP address of the second (secondary) DNS server. When “IP Setting” is  
set to “Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be  
changed.  
7. Proxy Setting: To configure the proxy server settings. The proxy server works as an intermediary  
for network communication between clients and other servers, which can provide benefits like  
security, anonymity, speedup or circumventing regional restrictions.  
On – To access the Internet via a proxy server.  
Proxy Host: To enter the proxy host name using the remote control.  
Proxy Port: To enter the proxy host port number using the remote control.  
Off (default) – Do not use a proxy server. We recommend keeping the Proxy Setting as  
Off”, unless you have a working Proxy Host and Proxy Port, and have to use the proxy  
server in order to access the internet.  
8. Connection Test: To test the Internet connection. It is recommended that you test the connection  
when you initially connect the player to the Internet, or whenever changes to “Connection Method”,  
“Wireless Setting”, “IP Setting” and other network parameters are made.  
78  
REFERENCES  
Useful Notes  
In order to prolong the service life of your player, it is recommended to wait at least 30 seconds  
before you turn it on again after switching it off.  
Remove disc and turn power off after operation.  
Some functions of the player may not be applicable to certain discs.  
Some discs with special features may not be fully supported by the player. This is not a  
malfunction of the unit.  
In the case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If  
the problem still exists, please follow the troubleshooting instructions or contact an OPPO  
service center.  
Troubleshooting  
Use this chart to resolve general operational problems. If there are any problems that you cannot  
resolve, please contact your OPPO service center.  
Symptom  
Possible Cause  
Solution  
Reference  
Page  
No sound  
Audio cable is not properly  
connected  
Check audio cable, and then reconnect if necessary.  
10 - 17  
Mute is activated  
Volume is too low  
SACD is played and the audio  
connection is coaxial or optical  
digital audio  
Press the MUTE button to cancel the mute.  
Press the VOL + button to increase the volume to 100.  
This is not supported due to copyright restrictions of  
SACD. Please use the analog or HDMI audio output.  
Alternatively, you may set SACD Priority to CD mode  
and the player will play the CD layer.  
30  
30  
16, 50  
DVD-Audio is played and the  
audio connection is coaxial or  
optical digital audio  
This is not supported due to copyright restrictions of  
DVD-Audio. Please use the analog or HDMI audio  
output. Alternatively, you may switch to the DVD-  
Video playback mode.  
16, 50  
No picture  
Video cable is not properly  
connected  
Check video cable; reconnect if necessary.  
10 - 11  
TV input is not correctly  
selected  
Select the input to which the player is connected.  
“Pure Audio” mode engaged  
Video output format is not  
support by the TV  
Press the PURE button to cancel this mode.  
Select a proper output resolution that is supported by  
your TV.  
41  
33  
Video system is not supported  
by the TV  
When playback is completely stopped, press and hold  
the P/N button or set the correct TV System in the  
Setup Menu.  
When playback is completely stopped, press and hold  
the P/N button or set the correct TV System in the  
Setup Menu.  
33, 53  
33, 53  
No color  
Video system is not supported  
by the TV  
Saturation set too low  
Loose or damaged component  
video cables  
Check the saturation setting on TV and player.  
If using component output, check that the three cables  
are all properly plugged in and not damaged. Make  
sure the color of the plugs match the jacks on both  
ends.  
54  
13  
Incorrect video output port  
Incorrect color space setting  
If using composite video output, check that the cable is  
not incorrectly plugged into a component video jack.  
If using HDMI for video output, check the color space  
setting on the TV and player.  
If using component video output, check the three  
component video cables to make sure the signals  
match on both ends  
10  
52  
13  
Incorrect color  
Incorrect component video  
cable connection  
79  
R E F E R E N C E S  
Picture rolling or  
split picture  
Video system is not supported  
by the TV  
When playback is completely stopped, press and hold  
the P/N button or set the correct TV System in the  
Setup Menu.  
33, 53  
27  
“No Disc” or  
“Unknown Disc”  
error  
No disc or incompatible disc  
loaded in player  
Dirty disc recording surface  
Disc not properly loaded  
Eject disc and check.  
Eject the disc and clean any dirt or fingerprints.  
Eject disc and make sure the label side is facing up  
and the record side is facing down.  
3
27  
Condensation on the Laser  
pick-up head  
Turn on the player, eject the disc and leave the player  
on for about an hour.  
2
Remote control  
failure  
Remote control is out of range  
Low battery  
Incorrect remote control code  
Use the remote control within the effective range.  
Replace the batteries.  
Open the disc tray. Aim the remote at the player. Press  
and hold the ENTER button on the remote for 5  
seconds to set the remote code.  
8
8
9
Temporary  
function failure  
Scratched or damaged disc is  
used  
Some functions are not  
available during playback  
Interference from other devices  
Replace the disc.  
27  
27  
2
Stop playback completely, then try again.  
Identify interference by turning off other devices, and  
then relocate or replace the offending device  
Some Setup  
Menu items are  
grayed out  
Some setup options cannot be  
Fully stop playback, eject the disc and try the Setup  
22  
changed while a disc is playing. Menu again.  
Some setup options may be  
mutually exclusive with other  
setup options.  
80  
R E F E R E N C E S  
Specifications  
Designs and specifications are subject to change without notice.  
Disc Types*  
BD Profile  
BD-Video, Blu-ray 3D, DVD-Video, DVD-Audio, AVCHD, SACD, CD, HDCD,  
Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE  
BD-ROM Version 2.4 Profile 5 for 3D (also compatible with Profile 1 Version 1.0  
and 1.1)  
Internal Storage 2GB (Approximately 1GB available for BD-Live persistent storage. Actual storage  
varies due to system usage)  
Output  
Analog Audio: 7.1ch or 5.1ch, stereo  
Digital Audio: Coaxial, Optical  
HDMI Audio: Stereo, up to 7.1ch high-resolution PCM, up to 5.1ch DSD,  
bitstream or LPCM conversion of Dolby Digital, Dolby Digital Plus, Dolby TrueHD,  
DTS, DTS-HD High Resolution Audio, and DTS-HD Master Audio.  
Analog Video: Composite, Component Video (Y/Pb/Pr, 480i/480p,  
720p/1080i available for non-restricted content only)  
Digital Video: HDMI with HDCP (NTSC: 480i/480p/720p/1080i/1080p/1080p24,  
PAL 576i/576p/720p/1080i/1080p/1080p24)  
Video  
Composite Video Amplitude: 1.0Vp-p (75)  
Characteristics  
Component Video: Y: 1.0Vp-p (75), Pb/Pr: 0.7Vp-p (75)  
Audio  
Frequency: 20Hz – 20kHz (±0.3dB), 20Hz – 96kHz (±2.0dB)  
Characteristics** Signal-to-Noise Ratio: >110dB (A-weighted)  
THD+N: < 0.002% (1kHz at 0dBFS, 20kHz LPF)  
General  
Specification  
Power Supply: ~ 100V – 240V, 50/60Hz AC  
Power Consumption: 35W (0.5W Standby)  
Dimensions: 430mm x 311mm x 79mm, 16.8 x 12.2 x 3.1 inches  
Mass: 4.9kg / 10.8 lbs  
Operating  
Temperature  
5°C - 35°C  
41°F - 95°F  
Operating  
Humidity  
15% - 75%  
No condensation  
* Compatibility with user-encoded contents or user-created discs is on a best effort basis with no guarantee  
due to the variation of media, software and techniques used.  
**Nominal specification.  
User Manual Updates Online  
An updated version of the User Manual may be available online at the OPPO Digital web site  
(www.oppodigital.com). To read or download the latest online User Manual, Click on the BDP-93  
product, and open its “Support” tab.  
Occasional updates are needed to reflect new features added to the player since the User Manual was  
printed. As future firmware updates brings in new features and functions, the online version of the User  
Manual will be updated accordingly.  
81  
R E F E R E N C E S  
Language Code List  
Code Language Name  
6565 Afar  
6566 Abkhazian  
6570 Afrikaans  
6577 Amharic  
6582 Arabic  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6669 Byelorussian  
6671 Bulgarian  
6672 Bihari  
6678 Bengali, Bangla  
6679 Tibetan  
6682 Breton  
Code Language Name  
7285 Hungarian  
7289 Armenian  
7365 Interlingua  
7378 Indonesian  
7383 Icelandic  
7384 Italian  
7387 Hebrew  
7465 Japanese  
7473 Yiddish  
7487 Javanese  
7565 Georgian  
7575 Kazakh  
7576 Greenlandic  
7577 Cambodian  
7578 Kannada  
7579 Korean  
7583 Kashmiri  
7585 Kurdish  
7589 Kirghiz  
Code Language Name  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Romanian  
8285 Russian  
8365 Sanskrit  
8368 Sindhi  
8372 Serbo-Croatian  
8373 Singhalese  
8375 Slovak  
8376 Slovenian  
8377 Samoan  
8378 Shona  
8379 Somali  
8381 Albanian  
8382 Serbian  
8385 Sundanese  
8386 Swedish  
8387 Swahili  
8465 Tamil  
8469 Telugu  
8471 Tajik  
8472 Thai  
6765 Catalan  
6779 Corsican  
6783 Czech  
6789 Welsh  
6865 Danish  
6869 German  
6890 Bhutani  
6976 Greek  
6978 English  
6979 Esperanto  
6983 Spanish  
6984 Estonian  
6985 Basque  
7065 Persian  
7073 Finnish  
7074 Fi jian  
7665 Latin  
7678 Lingala  
7679 Laothian  
7684 Lithuanian  
7686 Latvian,Lettish  
7771 Malagasy  
7773 Maori  
7775 Macedonian  
7776 Malayalam  
7778 Mongolian  
7779 Moldavian  
7782 Marathi  
7783 Malay  
7784 Maltese  
7789 Burmese  
7865 Nauru  
7869 Nepali  
7876 Dutch  
8473 Tigrinya  
8475 Turkmen  
8476 Tagalog  
8479 Tonga  
8482 Turkish  
8484 Tatar  
8487 Twi  
8575 Ukrainian  
8582 Urdu  
7079 Faroese  
7082 French  
7089 Frisian  
8590 Uzbek  
8673 Vietnamese  
8679 Volapuk  
8779 Wolof  
7165 Irish  
7168 Scots Gaelic  
7176 Galician  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
8872 Xhosa  
7879 Norwegian  
7982 Oriya  
8065 Panjabi  
8076 Polish  
8979 Yoruba  
9072 Chinese  
9085 Zulu  
7273 Hindi  
7282 Croatian  
8083 Pashto, Pushto  
82  
LIMITED WARRANTY  
OPPO Digital, Inc. Limited One Year Warranty  
Your OPPO product has been manufactured to precise standards, and with rigid quality control through  
every process of manufacturing. It is warranted by OPPO DIGITAL, INC. against defective  
workmanship or materials for one (1) full year from the original date of purchase. This warranty applies  
only to OPPO brand products imported or manufactured by OPPO Digital, Inc. and sold to the original  
consumer purchaser in the U.S.A. or Canada by either OPPO Digital, Inc. or an OPPO authorized  
reseller. This warranty does not apply to OPPO brand products imported and sold by unauthorized  
dealers, distributors, or other sellers. This warranty does not apply to products purchased or shipped  
outside of the U.S.A. and Canada. OPPO Digital, Inc. may at its sole discretion, refuse to honor the  
warranty of any such unauthorized product that may be presented for service.  
Warranty service can only be performed by OPPO Digital, Inc. or an OPPO authorized service center.  
The original dated bill of sale must be presented upon request as proof of purchase.  
OPPO Digital, Inc. will, at its option and at no charge as stipulated herein, repair or replace product  
which is returned either in person or postpaid and insured to an OPPO service center, with new or  
reconditioned parts or products. Replacement parts and products assume the remaining original  
warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers noncommercial use of this product, and shall not apply to the following,  
including, but not limited to: applications and uses for which this product was not intended; altered  
product or serial numbers; cosmetic damage or exterior finish; batteries and cable accessories;  
accidents, abuse, neglect, fire, water, lightning or other acts of nature; incorrect electrical line voltage,  
fluctuations and surges; failure to follow operating or maintenance instructions. OPPO Digital, Inc. does  
not warrant uninterrupted or error-free operation of the product. This limited warranty shall not extend to  
anyone other than the original purchaser of the product. It is nontransferable and states your exclusive  
remedy.  
THE FOREGOING WARRANTY IS THE ONLY WARRANTY WITH RESPECT TO THE PRODUCT  
AND OPPO DIGITAL, INC. MAKES NO OTHER WARRANTY WHATSOEVER, EXPRESS OR IMPLIED,  
REGARDING THE PRODUCT INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENT WILL OPPO DIGITAL, INC. OR ITS AUTHORIZED RESELLERS BE  
LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, EVEN IF SUCH DAMAGES  
RESULT FROM NEGLIGENCE OR OTHER FAULT.  
Some states do not allow limitation on how long an implied warranty lasts, or the exclusion or limitation  
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state.  
TO REGISTER YOUR PURCHASE FOR WARRANTY, please visit the following Web site:  
TO OBTAIN WARRANTY SERVICE, please follow these instructions:  
Contact OPPO customer service via email at [email protected] or by phone at (650)  
961-1118 with details of the defect claimed, product model, serial number, date and place of the  
original purchase.  
83  
If it is determined that your product needs service, a Return Merchandise Authorization (RMA)  
number will be issued to you along with return instructions and address of an OPPO service  
center.  
Pack the product securely, preferably in the original packaging, with your assigned RMA  
number marked clearly on the outside of the package. Send the package postpaid and insured  
to the OPPO service center to obtain warranty service.  
Thank you for choosing OPPO. Your satisfaction is our highest priority.  
OPPO Digital, Inc.  
2629 Terminal Blvd, Suite B  
Mountain View, CA 94043, U.S.A.  
(650) 961-1118  
84  
51971618  
V2.4  
85  

Radio Shack PLVWR840 User Manual
Precision Power 355cs User Manual
Planar PE170 User Manual
Pioneer S DV740 User Manual
Pioneer DEH 6400BT User Manual
Pioneer BONUSVIEW BDP LX91 User Manual
Philips BDP3000 User Manual
Olympus HD Storage S HD 100 User Manual
Meyer Cable Box 8120 User Manual
JVC WR DV1U User Manual