Nokia BH 206 User Manual

Nokia Bluetooth Headset BH-206  
4
1
2
5
3
7
8
6
9255316/2  
ENGLISH  
The availability of particular products may  
vary by region. Please check with the Nokia  
dealer nearest to you.  
Unauthorized changes or modifications to  
this device may void the user's authority to  
operate the equipment.  
Export Controls  
This device may contain commodities,  
technology or software subject to export  
laws and regulations from the US and other  
countries. Diversion contrary to law is  
prohibited.  
Introduction  
The Nokia Bluetooth Headset BH-206  
allows you to make and receive calls  
while on the move. You can use the  
headset with compatible phones that  
support Bluetooth wireless  
Bluetooth wireless technology  
Bluetooth wireless technology allows  
you to connect compatible devices  
without cables. A Bluetooth  
connection does not require that the  
phone and the headset be in line of  
sight, but both devices should be  
within 10 meters (30 feet) of each  
other. Connections may be subject to  
interference from obstructions, such  
as walls, or other electronic devices.  
technology.  
Read this user guide carefully before  
using the headset. Also read the user  
guide for your phone, which provides  
important safety and maintenance  
information. Keep the headset out of  
reach of small children.  
The headset complies with the  
Bluetooth Specification 2.0 + EDR  
that supports the Headset Profile 1.1  
and Hands-Free Profile 1.5. Check  
ENGLISH  
with the manufacturers of other  
devices to determine their  
compatibility with this device.  
There may be restrictions on using  
Bluetooth technology in some  
locations. Check with your local  
authorities or service provider.  
Get started  
The headset contains the following  
parts shown on the title page: charger  
connector (1), multifunction key and  
blue indicator light (2), volume keys  
(3), earloop (4), and microphone (5).  
Chargers  
Check the model number of any charger  
before using it with this device. The  
headset is intended for use with the  
AC-3, AC-4, and DC-4 chargers.  
Before using the headset, you must  
charge the battery and pair the  
headset with a compatible phone.  
Parts of the headset are magnetic.  
Metallic materials may be attracted to  
the headset. Do not place credit cards or  
other magnetic storage media near the  
headset, because information stored on  
them may be erased.  
Warning: Use only chargers  
approved by Nokia for use  
with this particular  
enhancement. The use of any other types  
may invalidate any approval or warranty  
and may be dangerous.  
For availability of approved  
enhancements, please check with your  
dealer. When you disconnect the power  
cord of any enhancement, grasp and pull  
the plug, not the cord.  
ENGLISH  
talk-time or up to 140 hours of  
Charge the battery  
standby time. However, the talk and  
standby times may vary when used  
with different mobile phones or other  
compatible Bluetooth devices, usage  
settings, usage styles, and  
The headset has an internal,  
nonremovable, rechargeable battery.  
Do not attempt to remove the battery  
from the device, as you may damage  
the device.  
environments.  
1. Connect the charger to a wall  
outlet.  
When battery power is low, the  
indicator light flashes quickly.  
2. Connect the charger cable to the  
charger connector. The indicator  
light is on while charging. It may  
take a while before charging starts.  
If charging does not start,  
disconnect the charger, plug it in  
again, and retry. Charging the  
battery fully may take up to  
2 hours 30 minutes.  
Switch the headset on or off  
To switch on, press and hold the  
multifunction key until the indicator  
light is displayed.  
To switch off, press and hold the  
multifunction key until the indicator  
light briefly flashes several times and  
turns off.  
3. When the battery is fully charged,  
the indicator light turns off.  
Pair the headset  
Disconnect the charger from the  
headset and the wall outlet.  
1. Ensure that your phone is switched  
on and that the headset is  
switched off.  
The fully charged battery has power  
for up to 7 hours and 30 minutes of  
ENGLISH  
2. Press and hold the multifunction  
key (for about 8 seconds) until the  
indicator light is continuously  
displayed.  
phone. In some phones you may  
need to make the connection  
separately after pairing. You only  
need to pair the headset with your  
phone once.  
3. Activate the Bluetooth feature on  
the phone, and set the phone to  
search for Bluetooth devices.  
If the pairing is successful, the  
indicator light briefly flashes five  
times, and the headset appears in the  
phone menu where you can view the  
currently paired Bluetooth devices.  
4. Select the headset from the list of  
found devices.  
5. Enter the passcode 0000 to pair  
and connect the headset to your  
The headset is now ready for use.  
Basic use  
Wear the headset  
Call handling  
Slide the earloop behind your ear, and To make a call, use your phone in the  
point the headset toward your mouth. normal way when the headset is  
To use the headset on the left ear,  
gently flip and rotate the earloop as  
shown in Figures 6, 7, and 8.  
connected to your phone.  
If your phone supports last number  
redialing with the headset, press and  
hold the multifunction key (when no  
ENGLISH  
call is in progress) until you hear a  
beep.  
want to answer the call, press and  
hold the multifunction key.  
If your phone supports voice dialing  
with the headset, briefly press the  
multifunction key when no call in  
progress, and proceed as described in  
the user guide of your phone.  
To adjust the earphone volume, press  
either volume key.  
To switch the call between the  
headset and a compatible phone,  
press and hold the multifunction key.  
To answer or end a call, briefly press  
the multifunction key. If you do not  
Battery information  
Your device is powered by a rechargeable left unused, a fully charged battery will  
battery. The battery can be charged and  
discharged hundreds of times, but it will  
eventually wear out. Recharge your  
battery only with Nokia approved  
lose its charge over time.  
Never use any charger that is damaged.  
Leaving the device in hot or cold places,  
such as in a closed car in summer or  
winter conditions, will reduce the  
capacity and lifetime of the battery.  
Always try to keep the battery between  
15°C and 25°C (59°F and 77°F). A device  
with a hot or cold battery may not work  
temporarily, even when the battery is  
fully charged. Battery performance is  
chargers designated for this device.  
Unplug the charger from the electrical  
plug and the device when not in use. Do  
not leave a fully charged battery  
connected to a charger, since  
overcharging may shorten its lifetime. If  
ENGLISH  
particularly limited in temperatures well explode if damaged. Dispose of batteries  
below freezing.  
according to local regulations. Please  
recycle when possible. Do not dispose as  
household waste.  
Do not dispose of batteries in a fire as  
they may explode. Batteries may also  
Care and maintenance  
Your device is a product of superior  
design and craftsmanship and should be  
treated with care. The suggestions below  
will help you protect your warranty  
coverage.  
and electronic components can be  
damaged.  
Do not store the device in hot areas.  
High temperatures can shorten the  
life of electronic devices, damage  
batteries, and warp or melt certain  
plastics.  
Keep all accessories and  
enhancements out of the reach of  
small children.  
Do not store the device in cold areas.  
When the device returns to its normal  
temperature, moisture can form  
inside the device and damage  
electronic circuit boards.  
Keep the device dry. Precipitation,  
humidity, and all types of liquids or  
moisture can contain minerals that  
will corrode electronic circuits. If your  
device does get wet, allow it to dry  
completely.  
Do not attempt to open the device.  
Do not drop, knock, or shake the  
device. Rough handling can break  
internal circuit boards and fine  
mechanics.  
Do not use or store the device in  
dusty, dirty areas. Its moving parts  
ENGLISH  
Do not use harsh chemicals, cleaning  
solvents, or strong detergents to  
clean the device.  
Do not paint the device. Paint can  
clog the moving parts and prevent  
proper operation.  
All of the above suggestions apply  
equally to your device, battery, charger,  
or any enhancement. If any device is not  
working properly, take it to the nearest  
authorized service facility for service.  

Pioneer Car Amplifier GM 3400T User Manual
Pioneer Blu BDP 52FD User Manual
Panasonic VDR M10PP User Manual
Panasonic ED250 BCP User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Car Amplifier MR J3 B User Manual
Medion MD80566 User Manual
Kodak GE680 User Manual
KitchenAid KFP740QER1 User Manual
JVC TK C750 User Manual
JVC GZ MG750B User Manual