DIGITAL CAMERA
Reference Manual
En
Table of Contents
Accessories .............................................................................................. iii
Notices..........................................................................................xiv
Wireless ........................................................................................xix
Introduction
Parts of the Camera.......................................................................2
Using the Touch Screen..............................................................11
First Steps......................................................................................16
Taking and Viewing Photographs
Point-and-Shoot Photography (Auto Mode) .........................28
Deleting Pictures..................................................................................32
Live Image Control...............................................................................36
Choosing a Creative Mode.........................................................38
Choosing a Mode That Matches the Subject or Situation.....39
The Creative Palette ............................................................................47
HDR ...........................................................................................................48
Easy Panorama......................................................................................49
Selective Color.......................................................................................52
Cross Process .........................................................................................53
Recording and Viewing Movies
Recording Movies........................................................................54
Taking Photographs During Movie Recording..........................59
Viewing Movies.....................................................................................60
Deleting Movies....................................................................................61
iv
Other Shooting Modes
Choosing a Shot Manually (Active Selection)............................ 63
Choosing Your Moment (Slow View)............................................ 67
Letting the Camera Choose the Moment (Smart Photo
Selector).............................................................................................. 69
z Combining Photos with Brief Movie Vignettes (Motion
More on Photography
Auto Pop-up Modes............................................................................ 84
Manual Pop-up Modes ...................................................................... 86
Auto Mode ............................................................................................. 90
Creative Mode....................................................................................... 90
Advanced Movie Mode ..................................................................... 91
Wi-Fi
WPS (Android Only) ............................................................................ 95
PIN Entry (Android Only)................................................................... 96
SSID (Android and iOS)...................................................................... 97
Uploading Photos One at a Time................................................... 99
Uploading Multiple Selected Photos..........................................101
v
More on Playback
Photo Information.................................................................... 103
Thumbnail Playback ................................................................ 106
Calendar Playback.................................................................... 107
Playback Zoom.......................................................................... 108
Deleting Pictures ...................................................................... 109
Deleting the Current Picture......................................................... 109
The Playback Menu .......................................................................... 109
Slide Shows................................................................................ 111
Connections
System Requirements...................................................................... 116
Viewing Pictures................................................................................ 120
Viewing Pictures on TV............................................................ 121
High-Definition Devices.................................................................. 121
Printing Photographs .............................................................. 123
Connecting the Printer.................................................................... 123
Printing Pictures One at a Time.................................................... 124
Printing Multiple Pictures............................................................... 126
The Playback Menu
Selecting Multiple Images.............................................................. 130
Image Review ............................................................................ 131
Rotate Tall .................................................................................. 131
Protect ........................................................................................ 131
Rating.......................................................................................... 131
vi
D-Lighting...................................................................................132
Resize...........................................................................................133
Crop .............................................................................................134
Face-Priority Zoom ...................................................................135
Edit Movie...................................................................................135
Combine 4-Second Movies......................................................137
Combine NMS Movies ..............................................................138
The Shooting Menu
Reset Shooting Options ...........................................................142
Exposure Mode..........................................................................142
Image Quality.............................................................................143
Image Size...................................................................................143
Number of Shots Saved ...........................................................146
Movie Before/After ...................................................................147
File Format..................................................................................148
Soft...............................................................................................148
Toy Camera Effect .....................................................................149
Metering .....................................................................................149
Auto Distortion Control ...........................................................150
Color Space.................................................................................151
Active D-Lighting ......................................................................152
Long Exposure NR.....................................................................153
Optical VR ...................................................................................153
Electronic VR ..............................................................................154
Focus Mode ................................................................................155
Manual Focus......................................................................................157
AF-Area Mode ............................................................................159
Focus Lock............................................................................................160
vii
Face-Priority .............................................................................. 161
Built-in AF Assist ....................................................................... 161
Flash Control ............................................................................. 162
Flash Compensation ................................................................ 163
Underwater Flash ..................................................................... 163
The Movie Menu
Reset Movie Options................................................................ 166
Slow Motion............................................................................... 166
Frame Size/Frame Rate............................................................ 167
Auto Image Capture................................................................. 168
The Image Processing Menu
Reset Processing Options ....................................................... 170
White Balance............................................................................ 170
Fine-Tuning White Balance ........................................................... 171
Preset Manual..................................................................................... 172
ISO Sensitivity ........................................................................... 175
Modifying Picture Controls............................................................ 176
Edit/Save............................................................................................... 180
Load from/Save to Card.................................................................. 181
High ISO Noise Reduction....................................................... 182
The Setup Menu
Reset Setup Options ................................................................ 185
Format Memory Card............................................................... 185
Slot Empty Release Lock ......................................................... 185
viii
Display.........................................................................................185
Display Brightness.............................................................................185
Grid Display..........................................................................................186
Shooting ...............................................................................................186
Playback................................................................................................186
Silent Photography...................................................................186
Sound Settings ..........................................................................187
Auto Power Off ..........................................................................187
Touch-Screen Controls.............................................................187
Shutter Button AE Lock............................................................187
Flicker Reduction.......................................................................188
Time Zone and Date .................................................................189
Auto Image Rotation ................................................................190
Firmware Version ......................................................................191
Technical Notes
Optional Accessories ................................................................192
Approved Memory Cards................................................................194
Attaching a Power Connector and AC Adapter......................195
Storage and Cleaning...............................................................197
Storage ..................................................................................................197
Cleaning................................................................................................197
Caring for the Camera and Battery: Cautions......................198
Available Settings .....................................................................202
Memory Card Capacity.............................................................206
ix
Battery/Display................................................................................... 209
Shooting (All Modes) ....................................................................... 209
Movies................................................................................................... 211
Tap Shooting Options ..................................................................... 211
Playback................................................................................................ 212
Wi-Fi (Wireless Networks)............................................................... 212
Miscellaneous..................................................................................... 212
Error Messages.......................................................................... 213
Specifications ............................................................................ 216
Battery Life........................................................................................... 233
Index ........................................................................................... 234
x
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this equip-
ment. Keep these safety instructions where all those who use the product will
read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
This icon marks warnings. To prevent possible injury, read all warn-
A
❚❚WARNINGS
ings before using this Nikon product.
Keep the sun out of the frame. Keep the
sun well out of the frame when
shooting backlit subjects. Sunlight
focused into the camera when the
sun is in or close to the frame could
cause a fire.
Do not disassemble. Touching the prod-
uct’s internal parts could result in
injury. In the event of malfunction,
the product should be repaired only
by a qualified technician. Should the
product break open as the result of a
fall or other accident, remove the bat-
tery and/or AC adapter and then take
the product to a Nikon-authorized
service center for inspection.
A
A
Turn off immediately in the event of mal-
function. Should you notice smoke or
an unusual smell coming from the
equipment or AC adapter (available
separately), unplug the AC adapter
and remove the battery immediately,
taking care to avoid burns. Continued
operation could result in injury. After
removing the battery, take the equip-
ment to a Nikon-authorized service
center for inspection.
A
Keep out of reach of children. Failure to
observe this precaution could result
in injury. In addition, note that small
parts constitute a choking hazard.
Should a child swallow any part of
this equipment, consult a physician
immediately.
A
A
Do not use in the presence of flammable
gas. Do not use electronic equipment
in the presence of flammable gas, as
this could result in explosion or fire.
Do not place the strap around the neck of
an infant or child. Placing the camera
strap around the neck of an infant or
child could result in strangulation.
A
A
Keep dry. Do not immerse in or expose
to water or handle with wet hands.
Failure to keep the product dry could
result in damage to the product, fire,
or electric shock, while handling the
product with wet hands could result
in electric shock.
xi
Follow the instructions of airline and hos-
pital personnel. This camera transmits
radio frequencies that could interfere
with medical equipment or aircraft
navigation. Disable the wireless net-
work feature before boarding an air-
craft, and turn the camera off during
take off and landing. In medical facili-
ties, follow staff instructions regard-
ing the use of wireless devices.
Avoid contact with liquid crystal. Should
the display break, care should be
taken to avoid injury due to broken
glass and to prevent the liquid crystal
from the display touching the skin or
entering the eyes or mouth.
A
A
Do not carry tripods with a lens or camera
attached. You could trip or accidentally
strike others, resulting in injury.
A
A
Observe proper precautions when handling
b a t te r i e s. Batteries may leak or
explode if improperly handled.
Observe the following precautions
when handling batteries for use in
this product:
• Use only batteries approved for use
in this equipment.
• Do not short or disassemble the
battery.
Do not remain in contact with the camera,
battery, or charger for extended periods
while the devices are on or in use. Parts of
the device become hot. Leaving the
device in direct contact with the skin
for extended periods may result in
low-temperature burns.
A
A
Do not leave the product where it will be
exposed to extremely high temperatures,
such as in an enclosed automobile or in
direct sunlight. Failure to observe this
precaution could cause damage or
fire.
• Be sure the product is off before
replacing the battery. If you are
using an AC adapter, be sure it is
unplugged.
• Do not attempt to insert the battery
upside down or backwards.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Replace the terminal cover when
transporting the battery. Do not
transport or store the battery with
metal objects such as necklaces or
hairpins.
• Batteries are prone to leakage when
fully discharged. To avoid damage
to the product, be sure to remove
the batter y when no charge
remains.
Do not aim the flash at the operator of a
motor vehicle. Failure to observe this
precaution could result in accidents.
A
A
Observe caution when using a flash.
• Using the camera with the flash in
close contact with the skin or other
objects could cause burns.
• Using a flash close to the subject’s
eyes could cause temporary visual
impairment. The flash should be no
less than one meter (3 ft 4 in.) from
the subject. Particular care should
be observed when photographing
infants.
xii
• When the battery is not in use,
attach the terminal cover and store
in a cool, dry place.
• The battery may be hot immedi-
ately after use or when the product
has been used on battery power for
an extended period. Before remov-
ing the battery turn the camera off
and allow the battery to cool.
• Discontinue use immediately
should you notice any changes in
the battery, such as discoloration or
deformation.
Use appropriate cables. When connect-
ing cables to the input and output
jacks, use only the cables provided or
sold by Nikon for the purpose to
maintain compliance with product
regulations.
A
A
CD-ROMs: CD-ROMs containing soft-
ware or manuals should not be
played back on audio CD equipment.
Playing CD-ROMs on an audio CD
player could cause hearing loss or
damage the equipment.
Observe proper precautions when handling
the charger:
A
• Keep dry. Failure to observe this pre-
caution could result in injury or
product malfunction due to fire or
electric shock.
• Do not short the charger terminals.
Failure to observe this precaution
could result in overheating and
damage to the charger.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not go near the charger during
thunderstorms. Failure to observe
this precaution could result in elec-
tric shock.
• Do not handle the plug or charger
with wet hands. Failure to observe
this precaution could result in injury
or product malfunction due to fire
or electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
xiii
Notices
• No part of the manuals included • Nikon will not be held liable for any
with this product may be repro- damages resulting from the use of
duced, transmitted, transcribed, this product.
stored in a retrieval system, or trans- • While every effort has been made to
lated into any language in any form, ensure that the information in these
by any means, without Nikon’s prior manuals is accurate and complete,
written permission.
we would appreciate it were you to
• Nikon reserves the right to change bring any errors or omissions to the
the specifications of the hardware attention of the Nikon representa-
and software described in these tive in your area (address provided
manuals at any time and without separately).
prior notice.
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notice for Customers in Europe
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that
electrical and electronic
equipment is to be col-
lected separately.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
The following apply only to
users in European countries:
users in European countries:
• All batteries, whether marked with
• This product is designated for sepa- this symbol or not, are designated
rate collection at an appropriate col- for separate collection at an appro-
lection point. Do not dispose of as priate collection point. Do not dis-
household waste.
pose of as household waste.
• Separate collection and recycling • For more information, contact the
helps conserve natural resources retailer or the local authorities in
and prevent negative consequences charge of waste management.
for human health and the environ-
ment that might result from incor-
rect disposal.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
xiv
Notice for Customers in the U.S.A.
The Battery Charger
IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE
INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet if needed. This power unit
is intended to be correctly oriented in a vertical or floor mount position.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable pro-
tection against harmful interference in
a residential installation. This equip-
CAUTIONS
Modifications
The FCC requires the user be notified
ment generates, uses, and can radiate
that any changes or modifications
radio frequency energy and, if not
made to this device that are not
installed and used in accordance with
expressly approved by Nikon Corpo-
the instructions, may cause harmful
ration may void the user’s authority to
interference to radio communications.
operate the equipment.
However, there is no guarantee that
Interface Cables
interference will not occur in a particu-
Use the interface cables sold or pro-
lar installation. If this equipment does
vided by Nikon for your equipment.
cause harmful interference to radio or
Using other interface cables may
television reception, which can be
exceed the limits of Class B Part 15 of
determined by turning the equipment
the FCC rules.
off and on, the user is encouraged to
try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/television technician for help.
Notice for Customers in the State of California
WARNING: Handling the cord on this
product may expose you to lead, a
chemical known to the State of Cali-
fornia to cause birth defects or other
reproductive harm. Wash hands after
handling.
Nikon Inc., 1300 Walt Whitman Road,
Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200
xv
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally cop-
ied or reproduced by means of a scanner, digital camera, or other device may
be punishable by law.
• Items prohibited by law from being copied • Cautions on certain copies and reproduc-
or reproduced
tions
Do not copy or reproduce paper The government has issued cautions
money, coins, securities, govern- on copies or reproductions of securi-
ment bonds, or local government ties issued by private companies
bonds, even if such copies or repro- (shares, bills, checks, gift certificates,
ductions are stamped “Sample.”
etc.), commuter passes, or coupon
tickets, except when a minimum of
necessary copies are to be provided
for business use by a company. Also,
do not copy or reproduce passports
issued by the government, licenses
issued by public agencies and pri-
vate groups, ID cards, and tickets,
such as passes and meal coupons.
The copying or reproduction of
paper money, coins, or securities
which are circulated in a foreign
country is prohibited.
Unless the prior permission of the
government has been obtained, the
copying or reproduction of unused
postage stamps or post cards issued
by the government is prohibited.
• Comply with copyright notices
The copying or reproduction of
copyrighted creative works such as
books, music, paintings, woodcuts,
prints, maps, drawings, movies, and
photographs is governed by
national and international copyright
laws. Do not use this product for the
purpose of making illegal copies or
to infringe copyright laws.
The copying or reproduction of
stamps issued by the government
and of certified documents stipu-
lated by law is prohibited.
Disposing of Data Storage Devices
Please note that deleting images or formatting memory cards or other data
storage devices does not completely erase the original image data. Deleted
files can sometimes be recovered from discarded storage devices using com-
mercially available software, potentially resulting in the malicious use of per-
sonal image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another
person, erase all data using commercial deletion software, or format the
device and then completely refill it with images containing no private infor-
mation (for example, pictures of empty sky). Wi-Fi settings can be reset to
default values by selecting Wi-Fi > Wi-Fi connection type > Reset Wi-Fi set-
tings in the setup menu. Care should be taken to avoid injury when physically
destroying data storage devices.
xvi
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com
Temperature Warnings
The camera may become warm to the touch during use; this is normal and
does not indicate a malfunction. At high ambient temperatures, after
extended periods of continuous use, or after several photographs have been
taken in quick succession, a temperature warning may be displayed, follow-
ing which the camera will turn off automatically to minimize damage to its
internal circuits. Wait for the camera to cool before resuming use.
Use Only Nikon Brand Electronic Accessories
Nikon cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including charg-
ers, batteries, AC adapters, and lens accessories) certified by Nikon specifically
for use with this Nikon digital camera are engineered and proven to operate
within the operational and safety requirements of this electronic circuitry.
The use of non-Nikon electronic accessories could damage the
camera and may void your Nikon warranty. The use of third-
party rechargeable Li-ion batteries not bearing the Nikon holo-
graphic seal shown at right could interfere with normal operation of the cam-
era or result in the batteries overheating, igniting, rupturing, or leaking.
For more information about Nikon brand accessories, contact a local autho-
rized Nikon dealer.
xvii
Use Only Nikon Brand Accessories
D
Only Nikon brand accessories certified by Nikon specifically for use
with your Nikon digital camera are engineered and proven to operate
within its operational and safety requirements. THE USE OF NON-NIKON
ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WAR-
RANTY.
Servicing the Camera and Accessories
D
The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or a
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particu-
larly recommended if the camera is used professionally. Any accesso-
ries regularly used with the camera, such as lenses, should be included
when the camera is inspected or serviced.
Before Taking Important Pictures
A
Before taking pictures on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot to ensure that the
camera is functioning normally. Nikon will not be held liable for dam-
ages or lost profits that may result from product malfunction.
Life-Long Learning
A
As part of Nikon’s “Life-Long Learning” commitment to ongoing prod-
uct support and education, continually-updated information is avail-
able on-line at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information,
tips, answers to frequently-asked questions (FAQs), and general advice
on digital imaging and photography. Additional information may be
available from the Nikon representative in your area. For contact infor-
mation, visit http://imaging.nikon.com/
xviii
Wireless
This product, which contains encryption software developed in the United
States, is controlled by the United States Export Administration Regulations
and may not be exported or re-exported to any country to which the United
States embargoes goods. The following countries are currently subject to
embargo: Cuba, Iran, North Korea, Sudan, and Syria.
Notices for Customers in the U. S. A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
FCC WARNING
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Nikon Corporation
may void the user’s authority to operate the equipment.
FCC Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Co-location
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200
xix
Notices for Customers in Canada
CAN ICES-3 B / NMB-3 B
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
FCC/IC RF Exposure Statement
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wire-
less devices emit low levels of radio frequency energy (RF) in the microwave
range while being used. Whereas high levels of RF can produce health effects
(by heating tissue), exposure of low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have sug-
gested that some biological effects might occur, but such findings have not
been confirmed by additional research. The 1 J4, which is equipped with a
LBWA1ZZYM6 (FCC ID:VPYLBYM / IC ID:772C-LBYM) wireless LAN module, has
been tested and found to comply with FCC/IC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. Please refer to the SAR test report that
was uploaded to FCC website.
xx
Notices for Customers in Europe
Hereby, Nikon Corporation, declares that the 1 J4 is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity may be con-
sulted at http://imaging.nikon.com/support/pdf/DoC_1J4.pdf
Notice for Customers in Singapore
Trade Name:
Model: 1 J4
This device complies with radio-frequency regulations. The content of certifi-
cation labels not affixed to the device is given below.
Complies with
IDA Standards
DA104328
Security
Although one of the benefits of this product is that it allows others to freely
connect for the wireless exchange of data anywhere within its range, the fol-
lowing may occur if security is not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to
steal user IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to the network
and alter data or perform other malicious actions. Note that due the design
of wireless networks, specialized attacks may allow unauthorized access
even when security is enabled.
xxi
xxii
Parts of the Camera
Take a few moments to familiarize yourself with camera controls
and displays. You may find it helpful to bookmark this section
and refer to it as you read through the rest of the manual.
The Camera Body
s
16
1 2 3
4
5
5
6
7
8
14
9
17
18
10
15
13 12 11
2 Shutter-release 10 Connector cover
button ....................... 33, 59, 65, 70, 75 11 Lens release button............................22
3 Power switch........................................23 12 Dust shield.................................197, 198
Power lamp ..........................................23 13 Lens mount .................................21, 158
4 Mode dial................................................ 6 14 Mounting mark ...................................21
5 Microphone....................................... 168 15 Body cap .............................................193
6 Focal plane mark (E) ..................... 158 16 Built-in flash.........................................84
7 AF-assist illuminator ....................... 161 17 HDMI connector................................121
Self-timer lamp....................................82 18 USB connector..........................118, 123
Red-eye reduction lamp ............ 85, 87
2
The Camera Body (Continued)
2
1
3
12 13
4
5
6
s
7
8
9
11
10
1 Monitor ................................. 4, 103, 185 6 O (delete) button....................... 32, 109
J (OK) button....................................... 7 cover latch........................... 18, 20, 195
for optional power connector......195
*
C (continuous shooting/
11 Speaker
self-timer)..................................... 79, 81 12 Memory card slot................................ 18
* Camera does not support TA-N100 tripod mounting spacer.
Holding the Camera
A
When framing photographs, hold the camera as shown below.
Hold the camera in
your right hand.
Cradle the lens with
your left hand.
Keep your elbows
propped lightly
against your torso.
3
The Monitor
1
2 3 4 5 6 7 8 9 1011
36
35
34
33
32
31
30
29
28
12
13
14
15
16
17
18
19
s
27 26 25 24 23 22 2120
Best moment capture
Number of shots remaining
Exposure mode ................................ 142
before memory buffer fills ..............80
White balance
recording indicator .........................173
4 Flash mode.................................... 85, 87 22 Time available......................................55
5 Self-timer ..............................................81 23 ISO sensitivity ....................................175
*
*
Auto ISO sensitivity indicator ........175
*
7 Picture Control ............................... 176 25 Aperture......................................... 43, 44
8 White balance ................................ 170 26 Shutter speed ............................... 42, 44
*
9 Frame size/frame rate..................... 167 27 Metering .............................................149
*
*
10 Image size ....................................... 143 28 Battery indicator ...............................27
*
*
11 Image quality ................................. 143 29 Sound settings ................................187
14 Face-priority ..............................34, 161 31 Auto distortion control....................150
*
*
indicator ............................................187
*
15 Focus area....................................29, 159 32 Tap shooting options.........................90
*
16 AF-area brackets ............................ 155 33 Auto image capture .........................168
*
18 Exposure compensation ...................83 35 Time elapsed........................................55
19 Flash-ready indicator .........................88 36 Recording indicator............................55
* Available only when Detailed is selected for Display > Shooting in the
Note: Display shown with all indicators lit for illustrative purposes.
4
The Mode Dial
The camera offers a choice of the follow-
ing shooting modes:
Mode dial
s
camera records a still image and about 1.6 s of movie footage. When the
resulting “Motion Snapshot” is viewed on the camera, the movie will
play back in slow motion over approximately 4 s, followed by the still
image.
u
Active Selection to select the best picture from
20 shots in temporary storage, Slow view to
choose the best timing for the shot while the
scene plays back in slow motion, or Smart
Photo Selector to let the camera pick the best
shot based on composition and movement.
tings for photographs and movies.
w
which you want to use special effects, match set-
tings to the scene, or control shutter speed and
aperture.
shutter-speed or aperture or record movies in slow or fast motion or
with other special effects.
6
The Multi Selector
The multi selector and J button are used
to adjust settings and navigate the cam-
era menus.
Multi selector
s
Settings: &
Access the & (feature) menu, a context-sensi-
tive menu listing options for shooting or play-
Menu navigation: 1
Move cursor up.
Select highlighted
item.
Settings:
C
Settings: E
View continuous
shooting/self-timer
View exposure com-
pensation menu
Menu navigation: 4
Return to previous
menu.
Menu navigation: 2
Select highlighted item
or display sub-menu.
Settings: M
Menu navigation: 3
Move cursor down.
The Multi Selector
A
Items can be highlighted by rotating the multi selector
as shown at right.
7
The G Button
Most shooting, playback, and setup
options can be accessed from the camera
menus. Press the G button to display
the menu selection dialog shown below,
then use the multi selector to highlight
the icon for the desired menu and press
J. To exit the menus, tap 1.
G button
s
Adjust settings for still photography.
Adjust movie-recording
options.
Playback menu
Adjust playback
settings.
Adjust white balance, ISO sensitivity,
Picture Controls, and other image
processing settings for photographs
and movies.
Connect to wireless networks.
Adjust basic camera settings.
8
❚❚ Using the Menus
the playback, shooting, movie, image
processing, setup, and Wi-Fi menus.
Multi selector
s
1 Select an item.
Press 1 or 3 to highlight menu items
and press 2 to view options for the
highlighted item.
2 Select an option.
Press 1 or 3 to highlight the desired
option and press J to select.
Using the Menus
A
The items listed may vary with camera settings. Items displayed in gray
9
The & (Feature) Menu
To display the feature menu and adjust
camera settings or access playback
options, press & (feature) on the multi
selector.
s
& menu (shooting mode)
& menu (playback)
1 Select an item.
Use the multi selector to highlight an
item and press J to display options
(to exit the & menu, press the shutter-
release button halfway as described
J).
2 Select an option.
Highlight the desired option or value
and press J to select.
The & Menu
A
The & menu is context-sensitive: its contents vary with camera settings
or the type of image displayed; options that are currently unavailable
are shown in gray. The & menu is not available in auto mode.
10
The Touch Screen
A
The touch screen responds to static electricity and may not respond
when covered with third-party protective films or when touched with
fingernails or gloved hands. Do not use excessive force or touch the
screen with sharp objects.
Using the Touch Screen
A
The camera may not recognize a tap if you leave your finger on the
screen too long. It may not recognize other gestures if your touch is too
soft, your fingers are moved too quickly or too short a distance or do
not remain in contact with the screen, or if the movement of the two
fingers in a pinch or stretch is not correctly coordinated.
s
❚❚ Taking Pictures
The touch screen can be used for the following shooting opera-
tions.
In auto and creative modes, you
can focus and take a picture by
tapping your subject in the dis-
play.
Take a
picture (tap
shooting)
In advanced movie mode, you
can focus by tapping your subject
in the display.
Focus (tap
shooting)
12
Tap highlighted icons to view set-
tings and tap icons or sliders to
change (the items available vary
with camera settings). Tap 0 to
save changes and exit, or tap 2 to
return to the previous display.
Adjust
settings
s
Tap Shooting Options
A
Tap shooting options can be adjusted by
❚❚ Viewing Pictures
The touch screen can be used for the following playback opera-
tions.
View other
images
Flick left or right to view other
images.
13
Use stretch and pinch gestures to
zoom in and out and slide to
scroll. You can also double-tap a
picture in full-frame playback to
zoom in and double-tap again to
Zoom in
To “zoom out” to a thumbnail
in full-frame playback. Use pinch
and stretch to choose the number
of images displayed from 4, 9, or
16 frames.
s
View
thumbnails
Flick left or right to view other
months in the calendar display
View other
months
Use
on-screen
guides
Various operations can be per-
formed by tapping on-screen
guides.
❚❚ Using the Menus
The touch screen can be used for the following menu opera-
tions.
Scroll
Slide up or down to scroll.
14
Choose a
menu
Tap a menu icon to choose a
menu.
s
Tap menu items to display
options and tap icons or sliders to
change. Tap 2 to return to the
previous display.
Adjust
settings
❚❚ The & Menu
The touch screen can be used to adjust settings in the & menu.
Tap menu items to display
options and tap icons or sliders to
change. Tap 0 to save changes
and exit, or tap 2 to return to the
Adjust
settings
previous display.
15
First Steps
1 Attach the camera strap.
Attach the strap securely to the two camera eyelets.
s
2 Charge the battery.
Insert the battery into the charger q and plug the charger in
w. An exhausted battery fully charges in about three hours.
Unplug the charger and remove the battery when charging is
complete.
Battery
charging
Charging
complete
The Plug Adapter
A
Depending on the country or region of
purchase, a plug adapter may be sup-
plied with the charger. The shape of the
adapter varies with the country or region
of purchase. If a plug adapter is supplied,
raise the wall plug and connect the plug
adapter as shown at right, making sure
the plug is fully inserted. Attempting to forcibly remove the plug
adapter could damage the product.
16
The Battery and Charger
D
below 0°C (32°F) or above 40°C (104°F); failure to observe this pre-
caution could damage the battery or impair its performance.
Capacity may be reduced and charging times may increase at bat-
tery temperatures from 0°C (32°F) to 10°C (50°F) and from 45°C
(113°F) to 60°C (140°F); the battery will not charge if its tempera-
ture is below 0°C (32°F) or above 60°C (140°F).
s
Charge the battery at ambient temperatures between 5°C (41°F)
and 35°C (95°F). If the CHARGE lamp flashes quickly during charging,
cease use immediately and take battery and charger to your retailer
or a Nikon-authorized service representative.
Do not move the charger or touch the battery during charging. Fail-
ure to observe this precaution could in very rare instances result in
the charger showing that charging is complete when the battery is
only partially charged. Remove and reinsert the battery to begin
charging again.
Use the charger with compatible batteries only. Unplug when not in
use.
17
3 Insert the battery and a memory card.
The camera stores pictures on microSD, microSDHC, and
Before inserting the battery or memory cards, check that they
are in the correct orientation. Using the battery to keep the
orange battery latch pressed to one side, slide the battery in
until it latches, and then slide in the memory card until it
clicks into place. Do not attempt to insert the card at an angle;
failure to observe this precaution could damage the product.
s
Front
1G6B
18
Inserting and Removing Batteries and Memory Cards
D
Always turn the camera off before inserting or removing batteries
or memory cards. Note that the battery and memory cards may be
hot after use; observe due caution when removing the battery and
memory cards.
Formatting Memory Cards
A
If this is the first time the memory card
will be used in the camera or if the card
has been formatted in another device,
select Format memory card in the setup
menu and follow the on-screen instruc-
this permanently deletes any data the card
may contain. Be sure to copy any photo-
graphs and other data you wish to keep
to a computer before proceeding.
s
19
Removing Batteries and Memory Cards
A
After turning the camera off, confirm that
and open the battery-chamber/memory
card slot cover. To remove the battery, first
release it by pressing the orange battery
latch in the direction shown by the arrow
and then remove the battery by hand.
s
To remove a memory card, first press the
card in to eject it (q); the card can then
be removed by hand (w). Care should be
taken to prevent the card popping from
the camera when ejected.
Memory Cards
D
• Do not remove memory cards from the camera, turn the camera
off, or remove or disconnect the power source during formatting
or while data are being recorded, deleted, or copied to a com-
puter. Failure to observe these precautions could result in loss of
data or in damage to the camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not bend, drop, or subject to strong physical shocks.
• Do not apply force to the card casing. Failure to observe this pre-
caution could damage the card.
• Do not expose to water, heat, high levels of humidity, or direct
sunlight.
• Do not format memory cards in a computer.
20
4 Attach a lens.
Be careful to prevent dust from entering the camera when the
lens or body cap is removed. The lens generally used in this
manual for illustrative purposes is a 1 NIKKOR VR 10–30mm
f/3.5–5.6 PD-ZOOM.
Remove the
rear lens cap
s
Remove the camera body cap
Mounting mark (camera)
Keeping the mounting marks
aligned, position the lens on
Mounting mark (lens)
the camera
21
Rotate the lens as shown until it clicks into place.
s
If the lens supports vibration reduction (VR), vibration reduc-
Detaching the Lens
A
Be sure the lens is retracted before
removal. To remove the lens, turn the
camera off, then press and hold the lens
release button (q) while turning the lens
clockwise (w). After removing the lens,
replace the camera body cap, the rear
lens cap, and, if applicable, the front lens
cap.
Lenses with Retractable Lens Barrel Buttons
A
Lenses with retractable lens barrel but-
tons can not be used when retracted. To
unlock and extend the lens, readying the
camera for use, keep the retractable lens
barrel button pressed (q) while rotating
the zoom ring as shown (w). The lens can
be retracted and the zoom ring locked by
pressing the button and rotating the ring
in the opposite direction. Be careful not to
press the retractable lens barrel button
while attaching or removing the lens.
Zoom ring
Retractable lens barrel
button
22
5 Turn the camera on.
Press the power switch to turn the
camera on. The power lamp will
briefly light green and the monitor will
turn on. If the lens is equipped with a
front lens cap, remove the cap before
shooting. If a 1 NIKKOR VR 10–30mm
f/3.5–5.6 PD-ZOOM lens is attached,
the lens will automatically extend
when the camera is turned on and
retract when the camera is turned off.
s
Turning the Camera Off
A
To turn the camera off, press the power switch again. The monitor
will turn off.
Auto Power Off
A
If no operations are performed for about a minute, the display will
turn off and the power lamp start to flash (if desired, the delay
before the display turns off automatically can be changed using the
be reactivated by operating the shutter-release button. If no opera-
tions are performed for about three minutes after the display has
turned off, the camera will turn off automatically.
Attaching and Removing Lenses
A
Turn the camera off before attaching or removing lenses. Note that
when the camera is turned off, the sensor protection barrier in the
lens will close, protecting the camera image sensor.
23
Lenses with Retractable Lens Barrel Buttons
A
The camera will turn on automatically when the retractable lens
barrel lock is released; in addition, if the view through the lens is dis-
played or the monitor is off, the camera will turn off when the lens
barrel is locked (in the case of 1 NIKKOR VR 10–30mm f/3.5–5.6 and
1 NIKKOR VR 30–110mm f/3.8–5.6 lenses, firmware version 1.10 or
later is required if locking the lens barrel is to turn the camera off
when the monitor is off; for information on updating lens firmware,
visit the Nikon website for your area).
s
6 Choose a language.
A language-selection dialog will be
displayed the first time the camera is
turned on. Use the multi selector and
24
7 Set the clock.
Use the multi selector and J button
that the camera uses a 24-hour clock.
s
Press 4 or 2 to highlight time
Press 1 or 3 to highlight date
format and press J.
zone and press J.
Press 1 or 3 to highlight daylight Press 4 or 2 to highlight items
saving time option and press J. and press 1 or 3 to change. Press
Jto exit to shooting display when
setup is complete.
Note: Language and clock can be changed at any time using Language
25
The Camera Clock
A
The camera clock is less accurate than most watches and household
clocks. Check the clock regularly against more accurate time pieces
and reset as necessary.
The camera clock is powered by an independent, rechargeable
power source, which is charged as necessary when the main battery
is installed or the camera is powered by an optional EP-5E power
will power the clock for about a month. If a message warning that
the clock is not set is displayed when the camera is turned on, the
clock battery is exhausted and the clock has been reset. Set the
clock to the correct time and date.
s
26
8 Check the battery level and memory card capacity.
Check the battery level and number
of exposures remaining in the moni-
tor.
Battery level
❚❚ Battery Level
Display
Description
Battery fully charged or
partially discharged;
level shown by L or
K icon in detailed
s
Exposures remaining
NO ICON
Low battery. Ready
fully-charged battery or
prepare to charge
battery.
H
Cannot take pictures. Battery exhausted;
Insert fully-charged shutter-release
battery.
disabled. Insert charged
battery.
❚❚ Number of Exposures Remaining
The monitor shows the number of pictures that can be stored
on the memory card at current settings (values over 1000 are
rounded down to the nearest hundred; e.g., values between
1200 and 1299 are shown as 1.2 k). If a warning is displayed
stating that there is not enough memory for additional
27
Taking and Viewing Photographs
z
This chapter describes how to take, view, and delete photo-
graphs in auto and creative mode.
Point-and-Shoot Photography (Auto Mode)
Follow the steps below to take photographs in auto mode, a
“point-and-shoot” mode in which the camera automatically
detects the subject type and adjusts settings according to the
subject and situation.
z
1 Turn the camera on.
Press the power switch to turn the
camera on.
2 Select C mode.
Rotate the mode dial to C (auto).
28
3 Ready the camera.
Hold the camera securely with both
hands, being careful not to obstruct
the lens, AF-assist illuminator, or
microphone. Rotate the camera as
shown at lower right when taking pic-
tures in “tall” (portrait) orientation.
z
4 Frame the photograph.
Position your subject in the center of
the frame.
5 Focus.
Press the shutter-release
button halfway to focus. If
the subject is poorly lit, the
and the AF-assist illumina-
assist the focus operation.
If the camera is able to focus, the selected
focus area will be highlighted in green
and a beep will sound (a beep may not
sound if the subject is moving).
Focus area
If the camera is unable to focus, the focus
area will be displayed in red.
29
6 Shoot.
Smoothly press the shutter-
release button the rest of
the way down to release
the shutter and record the
photograph. The memory
card access lamp will light
and the photograph will be
displayed in the monitor for
a few seconds (the photo
will automatically clear
from the display when the
shutter-release button is
pressed halfway). Do not
eject the memory card or
remove the battery until the
lamp has gone out and
recording is complete.
z
Memory card access lamp
The Framing Grid
A
A framing grid can be displayed by selecting
On for Display > Grid display in the setup
30
Viewing Photographs
Press K to display your most recent pho-
tograph full frame in the monitor (full-
frame playback).
K button
z
Press 4 or 2 or rotate the multi selector
to view additional pictures.
To end playback and return to shooting mode, press the shutter-
release button halfway.
A
The following options can be accessed by pressing & when a photo is
displayed:
1
2
3
4
7
6
5
31
Deleting Pictures
To delete the current picture, press O. Note that once deleted, pic-
tures can not be recovered.
1 Display the photograph.
Display the photograph you wish to delete as described on
the preceding page.
2 Press O.
A confirmation dialog will be dis-
played.
z
O button
3 Delete the photograph.
Press O again to delete the picture and
return to playback, or press K to exit
without deleting the picture.
32
The Shutter-Release Button
A
The camera has a two-stage shutter-release button. The camera
focuses when the shutter-release button is pressed halfway. To take the
photograph, press the shutter-release button the rest of the way down.
Focus: Press halfway
Taking Several Photographs in Succession
Shoot: Press the rest
of the way down
z
A
can take additional photographs without refocusing by keeping the
shutter-release button pressed halfway between shots.
Automatic Scene Selection
A
In auto mode, the camera automatically ana- Scene icon
lyzes the subject and selects the appropriate
scene. The selected scene is shown in the
monitor.
c Portrait: Human portrait subjects.
d Landscape: Landscapes and cityscapes.
f Night portrait: Portrait subjects framed against dark backgrounds.
e Close up: Subjects close to the camera.
g Night landscape: Poorly-lit landscapes and cityscapes.
Z Auto: Subjects that do not fall into the categories listed above.
33
Using a Zoom Lens
A
Use the zoom ring to zoom in on the subject so that it fills a larger area
of the frame, or zoom out to increase the area visible in the final photo-
graph. During movie recording with the 1 NIKKOR VR 10–30mm f/3.5–
5.6 PD-ZOOM, the zoom rate is unaffected by the speed with which the
ring is rotated.
Zoom in
Zoom out
z
Zoom ring
If you are using a 1 NIKKOR VR 10–100mm
f/4.5–5.6 PD-ZOOM lens (available sepa-
rately), slide the power drive zoom switch to
T to zoom in and to W to zoom out. The speed
with which the camera zooms in and out var-
ies with how far you slide the switch. The
Zoom guide
zoom position is shown by the zoom guide in
the display.
Face Priority
A
The camera detects and focuses on portrait
subjects (face priority). A double yellow bor-
der will be displayed if a portrait subject is
detected facing the camera (if multiple faces,
up to a maximum of five, are detected, the
camera will select the closest subject). Press
the shutter-release button halfway to focus
on the subject in the double yellow border. The border will clear from
the display if the camera can no longer detect the subject (because, for
example, the subject has looked away).
Available Settings
A
For information on the options available in auto mode, see page 202.
34
Deleting Multiple Pictures
A
all or selected pictures.
See Also
A
See page 186 for information on silencing the beep that sounds when
the camera focuses or the shutter is released. For information on tog-
on viewing multiple images. For information on zooming in on the cen-
slide shows.
z
35
Live Image Control
Live image controls let you preview how
changes to each control will affect the
final photograph. To choose a live image
control for auto mode, press J to display
the live image control menu, then use the
multi selector to highlight a control and
press J to view the effect. Rotate the
multi selector to choose a setting and
press J to select.
z
Increase effect
Active D-Lighting: Preserve details in high-
lights and shadows for natural contrast.
Active D-Lighting: High Active D-Lighting: Low
Reduce effect
Sharpen background
Background softening: Soften background
details to make your subject stand out, or
bring both background and foreground
into focus.
Soften background
Background sharp
Background softened
36
Freeze motion
Motion control: Suggest motion by blurring
moving objects, or “freeze” motion to
capture moving objects clearly.
Blur motion
Brighter
Freeze motion
Blur motion
z
Brightness control: Make pictures brighter
or darker.
Brighter
Darker
Darker
Live Image Control
D
not be used when live image control is in effect. Pressing the movie-
record button cancels live image control.
37
Choosing a Creative Mode
Choose creative mode to match settings to the subject or situa-
tion, take photos using special effects, or control shutter speed
and aperture.
1 Select w mode.
Rotate the mode dial to w (creative).
z
2 Choose an option.
Press & (feature) on the multi selector
to display the & menu, then highlight
Creative and press J. Highlight an
option suited to your subject and cre-
38
Choosing a Mode That Matches the Subject or Situation
Choose a creative mode according to the subject or situation:
Option
Description
The camera sets shutter speed and aperture for opti-
and in other situations in which there is little time to
adjust camera settings.
Programmed auto (P)
You choose the shutter speed; the camera selects an
motion.
You choose the aperture; the camera selects a shut-
background or bring both foreground and back-
ground into focus.
Shutter-priority auto
(S)
z
Aperture-priority
auto (A)
Choose a shutter speed of “Bulb” for long time-expo-
Manual (M)
Rotate the palette to choose creative effects while
Shoot panoramas for later viewing on the camera
Creative Palette (4)
HDR (5)
Easy panorama (p)
Shoot photographs with a soft filter effect. Use the &
ening and to choose how softening applies to por-
Soft (q)
The top and bottom of each photo is blurred so that
the subject appears to have been a diorama photo-
graphed at short range. Works best when shooting
from a high vantage point.
Miniature effect (r)
Take photos in which only a selected hue appears in
Selective color (s)
Choose a base color to create photographs with dif-
Cross process (6)
Alter color saturation and reduce peripheral illumi-
39
A
Pressing & in creative mode displays the items listed below. The items
1
2
Focus mode ....................................... 155
Metering............................................. 149
Picture Control.................................. 176
Filter strength ................................... 148
Portrait................................................ 148
Hue .........................................................53
Saturation .......................................... 149
3
4
5
z
6
Available Settings
A
For information on the options available in creative mode, see page
204.
40
Taking Photos in P, S, A, and M Modes
P, S, A, and M modes offer varying degrees of control over shutter
speed and aperture. Choose a mode and adjust settings accord-
ing to your creative intent.
❚❚ P Programmed Auto
In this mode, the camera automatically adjusts shutter speed
and aperture for optimal exposure in most situations. This mode
is recommended for snapshots and other situations in which
you want to leave the camera in charge of shutter speed and
aperture.
z
Choosing a Combination of Shutter Speed and Aperture
A
Although the shutter speed and aperture
chosen by the camera will produce optimal
results, you can also choose from other com-
binations that will produce the same expo-
sure (“flexible program”). Rotate the multi
selector clockwise for large apertures (low
f-numbers) that blur background details or
fast shutter speeds that “freeze” motion.
Rotate the multi selector counterclockwise
for small apertures (high f-numbers) that
increase depth of field or slow shutter speeds
that blur motion. U is displayed while flexible
program is in effect.
Restoring Default Shutter Speed and Aperture Settings
A
To restore default shutter speed and aperture settings, rotate the multi
selector until U is no longer displayed or turn the camera off. The
default shutter speed and aperture is automatically restored when the
camera enters standby mode.
41
❚❚ S Shutter-Priority Auto
In shutter-priority auto, you choose the shutter speed while the
camera automatically selects the aperture that will produce the
optimal exposure. Use slow shutter speeds to suggest motion by
blurring moving subjects, fast shutter speeds to “freeze” motion.
z
Fast shutter speed (1
/16 00 s)
Slow shutter speed (1 s)
Choosing a Shutter Speed
Rotate the multi selector to choose from
shutter speeds between 30 s and 1
/
16,000 s.
Rotate the selector clockwise for faster
shutter speeds, counterclockwise for
slower shutter speeds.
Continuous Shooting
A
The selected shutter speed may change
when a frame rate of 10 fps or faster is
selected in continuous shooting mode
42
❚❚ A Aperture-Priority Auto
In aperture-priority auto, you choose the aperture while the
camera automatically selects the shutter speed that will produce
the optimal exposure. Large apertures (low f-numbers) reduce
depth of field, blurring objects behind and in front of the main
subject. Small apertures (high f-numbers) increase depth of
field, bringing out details in the background and foreground.
Short field depths are generally used in portraits to blur back-
ground details, long field depths in landscape photographs to
bring the foreground and background into focus.
z
Large aperture (f/5.6)
Small aperture (f/16)
Choosing an Aperture
Rotate the multi selector counterclock-
wise for larger apertures (lower f-num-
bers), clockwise for smaller apertures
(higher f-numbers). The minimum and
maximum values depend on the lens cur-
rently in use.
43
❚❚ M Manual
In manual mode, you control both shutter speed and aperture.
Choosing Shutter Speed and Aperture
Adjust shutter speed and aperture with
reference to the exposure indicator (see
below). Press 2 to highlight shutter
speed or aperture and rotate the multi
selector to choose a value, then repeat
for the remaining item. Rotate the selec-
tor clockwise for faster shutter speeds or
z
smaller apertures (higher f-numbers),
counterclockwise for slower shutter
Shutter speed
speeds and larger apertures (lower f-
numbers). Shutter speeds can be set to
values as fast as 1
/16,000 s or as slow as 30 s,
or to “Bulb” to hold the shutter open
indefinitely for a long time-exposure
between the minimum and maximum for
the lens.
Press 2 to highlight
aperture.
Aperture
Press 2 to highlight
shutter speed.
Continuous Shooting
A
The selected shutter speed may change when a frame rate of 10 fps or
44
The Exposure Indicator
A
When shutter speeds other than “Bulb” are
selected, the exposure indicator shows
whether the photograph would be under-
or over-exposed at current settings.
Optimal exposure
Underexposed by 1
/3 EV
Overexposed by over 2 EV
z
ISO Sensitivity (P, S, A, and M Modes)
A
era will automatically adjust sensitivity within the selected range if
optimal exposure can not be achieved at the selected shutter speed or
aperture.
❚❚ Long Time-Exposures (M Mode Only)
Select a shutter speed of “Bulb” for long
time-exposures of moving lights, the
stars, night scenery, or fireworks. The
shutter remains open while the shutter-
release button is held down. To prevent
blur, use a tripod.
1 Ready the camera.
Mount the camera on a tripod or place it on a stable, level sur-
face. To prevent loss of power before the exposure is com-
plete, use a fully charged EN-EL22 battery or an optional
EH-5b AC adapter and EP-5E power connector. Note that
noise (bright spots, randomly-spaced bright pixels, or fog)
may be present in long exposures; before shooting, choose
45
2 Choose a shutter speed of “Bulb”.
Press 2 to highlight shutter speed and
rotate the multi selector counterclock-
wise to select “Bulb”.
z
3 Open the shutter.
After focusing, press the shutter-release button all the way
down. Keep the shutter-release button pressed until the
exposure is complete.
4 Close the shutter.
Take your finger off the shutter-release button.
Shooting ends automatically after about two minutes. Note that
some time may be required to record long exposures.
46
The Creative Palette
To choose a creative effect, rotate the multi selector or use a fin-
ger to rotate the creative palette in the monitor. The selected
effect is visible in the monitor and changes gradually as the pal-
ette is rotated.
z
Press the shutter-release button all the way down to take a pic-
ture with the selected effect (tap shooting options are not avail-
able when the creative palette is displayed; to view or hide the
creative palette, tap 4). The built-in flash can not be used.
Scene Detection
A
The camera automatically adjusts settings to suit the subject and situa-
tion. The effects available vary with the type of subject detected. To
reset the palette, press J or tap Reset while the creative palette is dis-
played.
47
HDR
Details in highlights and shadows are preserved using HDR (high
dynamic range). Each time the shutter-release button is fully
pressed, the camera takes two shots in quick succession and
combines them to preserve details in highlights and shadows in
high-contrast scenes; the built-in flash does not fire. Some time
may be required to process the pictures; the final photograph
will be displayed when processing is complete.
z
+
First exposure
(darker)
Second exposure
(brighter)
Combined HDR
image
Framing HDR Photographs
D
The edges of the image will be cropped out. The desired results may
not be achieved if the camera or subject moves during shooting.
Depending on the scene, shading may be uneven and shadows may
appear around bright objects or halos around dark objects.
48
Easy Panorama
Follow the steps below to shoot panoramas. During shooting,
used, but the built-in flash will not fire.
1 Set focus and exposure.
Frame the start of the pan-
orama and press the shut-
ter-release button halfway.
Guides will appear in the
display.
z
2 Start shooting.
Press the shutter-release
button the rest of the way
down and then lift your fin-
ger from the button. 1, 3,
4, and 2 icons will appear
in the display to indicate
the possible pan directions.
3 Pan the camera.
Progress indicator
Slowly pan the camera up, down, left,
or right as shown below. Shooting will
start when the camera detects the pan
direction and a progress indicator will
appear in the display. Shooting ends
automatically when the end of the
panorama is reached.
49
An example of how to pan the camera is shown below. With-
out changing your position, pan the camera in a steady curve
either horizontally or vertically. Time the pan according to the
option selected for Image size in the shooting menu: about
15 seconds are needed to complete the pan when
A Normal panorama is selected, about 30 seconds when
B Wide panorama is selected.
z
Panoramas
A
High-distortion wide-angle lenses may fail to produce the desired
results. An error message will be displayed if the camera is panned too
quickly or unsteadily. Note that because panoramas are composed of
multiple images, the joins between images may be visible and the
desired results may not be achieved with moving subjects or with neon
lights or other subjects that exhibit rapid changes in color or bright-
ness, subjects that are too close to the camera, poorly-lit subjects, and
subjects such as the sky or sea that are a solid color or contain simple
repeating patterns.
The completed panorama will be slightly smaller than the area visible
in the display during shooting. No panorama will be recorded if shoot-
ing ends before the halfway point; if shooting ends after the halfway
point but before the panorama is complete, the unrecorded portion
will be shown in gray.
50
❚❚ Viewing Panoramas
Panoramas can be viewed by pressing 3 when a panorama is
displayed with the smallest dimension filling the display and the
camera will then scroll through the picture in the original pan
direction.
z
Navigation
window
Guide
The following operations can be performed:
To
Use
Description
Pause
Pause playback.
Resume playback when the panorama is
paused or during rewind/advance.
Play
J
Press 4 to rewind, 2 to advance. If playback is
paused, the panorama rewinds or advances a
segment at a time; keep the button pressed
for continuous rewind or advance.
Advance/
rewind
Return to
full-frame
playback
/K Press 1 or K to exit to full-frame playback.
51
Selective Color
Take black-and-white pictures in which one hue appears in a
color.
1 Choose Select color.
Press & to display the & (feature)
menu, then highlight Select color
and press J.
z
2 Choose a color.
Use the multi selector to choose a
color and press J.
3 Take pictures.
Press the shutter-release button all the way down to take pic-
tures. Only the selected hue will appear in color; all other
hues will be recorded in shades of gray.
52
Cross Process
Select a base hue to take pictures with modified colors.
1 Select Hue.
Press & to display the & (feature)
menu, then highlight Hue and press
J.
z
2 Choose a color.
Use the multi selector to choose a
base color (red, green, blue, or yellow)
and press J.
3 Take pictures.
Press the shutter-release button all the way down to take pic-
tures with modified colors.
53
Recording and Viewing Movies
y
Recording Movies
Use the movie-record button to record movies in auto, creative,
and advanced movie mode.
1 Turn the camera on.
Press the power switch to turn the
camera on.
y
2 Choose a shooting mode.
Rotate the mode dial to C (auto), w
(creative), or v (advanced movie) as
movie mode, you can choose a movie
type using the Advanced movie
3 Frame the opening shot.
Frame the opening shot with your
subject in the center of the display. If
Slow motion is selected in advanced
release button halfway to focus.
The 0 Icon
A
A 0 icon indicates that movies can not be recorded.
54
4 Start recording.
Press the movie-record button to
begin recording. A recording indica-
tor, the time elapsed, and the time
available are displayed while record-
ing is in progress.
Audio Recording
A
Movie-record button
Be careful not to cover the microphone
and note that the built-in microphone
may record sounds made by the camera
or lens. Except when recording slow-
motion movies, the camera focuses con-
tinuously; to avoid recording focus noise,
select Single AF for Focus mode in the
Recording indicator/
Time elapsed
y
Time available
5 End recording.
Press the movie-record button again
to end recording. Recording will end
automatically when the maximum
ory card is full, another mode is
selected, the lens is removed, or the
Movie-record button
Maximum Length
A
The camera can record movies up to 4 GB in size (for more informa-
55
❚❚ Shooting Mode
Movies can be recorded in the shooting modes listed below.
Movies can not be recorded in best moment capture or Motion
Snapshot modes.
Choose this mode to leave the camera in
charge of choosing settings. The camera
automatically adjusts settings according
to the subject and situation.
Record movies in exposure mode P
(programmed auto). If Creative Palette is
selected, the chosen effect will be applied
y
adjust shutter speed or aperture, or record
movies in slow or fast motion or with
other special effects.
Movie Sound
A
The Movie sound options item in the movie menu offers microphone
Available Settings
A
For information on the options available in advanced movie mode, see
56
❚❚ Advanced Movie Options
In v (advanced movie) mode, the fol-
lowing options can be accessed by press-
ing & and selecting Advanced movie in
the & (feature) menu.
0 HD movie
Record high-definition (HD) movies.
Record up to about three seconds of silent slow-
motion footage. Slow-motion movies are recorded at
400 fps and play back at about 30 fps.
y Slow motion
Recording
y
Playback
Record silent fast-motion footage that plays back at
about four times normal speed. Playback time is one
quarter the recording time.
1 Fast motion
Recording
Playback
Record silent jump-cut movies. Recording pauses
every other second for a drop-frame effect.
Recording
2 Jump cut
Playback
Record a 4-second movie clip. Multiple clips can be
3 4-second movie joined into a single movie using the Combine 4-sec-
57
A
Pressing & in advanced movie mode displays the items listed below.
1
2
Exposure mode................................. 142
Frame size/frame rate ..................... 167
3
4
5
6
y
Slow Motion
A
When slow motion is selected in advanced movie mode, the camera
can be focused by pressing the shutter-release button halfway before
recording begins. The camera focuses on the subject at the center of
can not be adjusted during recording. Frame rate options are described
Recording Time
A
The following table lists the approximate maximum recording times for
individual movies shot at the default frame rate in each shooting mode.
Auto mode
20 minutes
20 minutes
Creative mode
Advanced movie mode
HD movie
20 minutes
3 seconds
20 minutes
20 minutes
4 seconds
Slow motion
Fast motion
Jump cut
4-second movie
58
Taking Photographs During Movie Recording
Press the shutter-release button all the
way down to take a photograph without
interrupting movie recording. Photo-
graphs taken during movie recording
have an aspect ratio of 3 : 2.
y
Taking Photographs During Movie Recording
Up to 20 photographs can be taken with each movie shot. Please note
that photographs can not be taken with slow-motion movies.
A
Focus Lock
A
If Single AF is selected for Focus mode in the movie menu for
advanced movie mode, focus will lock while the shutter-release button
See Also
A
See page 168 for information on configuring the camera to take photo-
graphs automatically during movie recording.
59
Viewing Movies
Press 3 to start playback.
Movie playback indicator/
1 icon/Length
Current position/total length
y
Volume
Guide
The following operations can be performed:
To
Use
Description
Pause
Pause playback.
Resume playback when the movie is paused
or during rewind/advance.
Play
J
Press 4 to rewind, 2 to advance. Speed
increases with each press, from 2× to 4× to 8×
to 16×. If playback is paused, the movie
rewinds or advances one frame at a time; keep
the button pressed for continuous rewind or
advance.
Advance/
rewind
Adjust
volume
Rotate the multi selector to adjust volume.
Return to
full-frame
playback
/K Press 1 or K to exit to full-frame playback.
60
A
The following options can be accessed by pressing & when a movie is
displayed:
1
2
3
4
5
y
Deleting Movies
To delete the current movie, press O. A
confirmation dialog will be displayed;
press O again to delete the movie and
return to playback, or press K to exit
without deleting the movie. Note that
once deleted, movies can not be recovered.
O button
61
See Also
A
movies. For information on the frame size and frame rate options avail-
able for HD movies, see page 167.
Recording Movies
D
Flicker, banding, or distortion may be visible in the display and in the
final movie under fluorescent, mercury vapor, or sodium lamps or if the
camera is panned horizontally or an object moves at high speed
through frame (flicker and banding can be reduced by choosing a
Flicker reduction option that matches the frequency of the local AC
ter speed available is 1 100 s at 50 Hz, 1
/60 s at 60 Hz; flicker reduction is
/
y
not available with slow-motion movies). Bright light sources may leave
after-images when the camera is panned. Jagged edges, color fringing,
moiré, and bright spots may also appear. When recording movies,
avoid pointing the camera at the sun or other strong light sources. Fail-
ure to observe this precaution could result in damage to the camera’s
internal circuitry.
62
Other Shooting Modes
R
In addition to the modes described above, the camera offers
u (best moment capture) mode to help with hard-to-time shots
and a z (Motion Snapshot) mode that combines photographs
u Choosing the Moment (Best Moment Capture)
Choose a shot from 20 frames recorded to temporary storage
shortly before or after the shutter is released (Active Selection),
choose the moment to release the shutter as the scene plays
back in slow motion (slow view), or let the camera choose the
best shot based on composition and movement (Smart Photo
Selector).
R
Choosing a Shot Manually (Active Selection)
Choose up to 20 shots from 20 frames recorded shortly before or
after the shutter-release button is pressed all the way down.
63
1 Select u mode.
Rotate the mode dial to u (best
moment capture).
2 Choose Active Selection.
Press & (feature) to display the &
menu. Highlight Best moment cap-
ture and press J, then highlight
Active Selection and press J.
R
3 Frame the photograph.
Compose the photograph with your
subject in the center of the frame.
64
4 Begin buffering photographs.
Press the shutter-release button half-
displayed as the camera begins
recording images to the memory
buffer.
5 Shoot.
Smoothly press the shutter-release
button the rest of the way down. The
20 frames recorded to the buffer in the
moments before and after the shutter-
release button was pressed all the way
down will be copied to temporary
storage.
R
6 Select up to 20 frames.
Press 4 or 2 to scroll through the
frames and press 1 or 3 to select or
deselect. Selected images are indi-
cated by a p icon, while the remaining
images are marked with O icons to
show that they will be deleted.
7 Save the selected frames.
Press J to save the selected frames to the memory card. The
memory card access lamp will light while recording is in
progress; note that depending on shooting conditions and
memory card write speed, some time may be required to save
the selected images.
65
Active Selection
A
At default settings, the frame recorded at the moment the shutter-
release button was pressed all the way down is automatically marked
with a p icon in Step 6.
A
Pressing & in best moment capture mode displays the items listed
1
2
Exposure mode................................. 142
Capture 20 frames over .................. 146
Frames saved (default) ................... 146
Number of shots saved................... 146
3
4
5
R
6
Available Settings
A
For information on the options available in best moment capture
mode, see page 202.
Best Moment Capture Mode
A
Movies can not be recorded, and pressing the movie-record button has
no effect. The flash can not be used.
See Also
A
66
Choosing Your Moment (Slow View)
When slow view is selected in u (best moment capture) mode,
the camera captures a short sequence of still images and plays
them back in slow motion so that you can choose the precise
moment for a photograph.
1 Select u mode.
Rotate the mode dial to u (best
moment capture).
R
2 Select Slow view.
Press & (feature) to display the &
menu. Highlight Best moment cap-
ture and press J, then highlight Slow
view and press J.
3 Frame the photograph.
Compose the photograph with your
subject in the center of the frame.
67
4 Press the shutter-release button halfway.
After focusing, the camera will record
20 frames to a temporary memory
buffer. It will then slowly play them
back in a continuous loop while the
shutter-release button is kept pressed
halfway. A & icon is displayed in the
monitor.
Progress indicator
When the desired frame is displayed,
press the shutter-release button the
rest of the way down to record the cur-
rent frame and discard the remaining
images. The selected frame will be dis-
played for a few seconds when record-
ing is complete. To delete the buffer
contents and exit without recording a
photograph, release the button with-
out pressing it the rest of the way
down.
R
68
Letting the Camera Choose the Moment
(Smart Photo Selector)
The Smart Photo Selector helps you capture a fleeting expres-
sion on the face of a portrait subject or other hard-to-time shots
such as group photos in party scenes. Each time the shutter is
released, the camera automatically selects the best shot and four
best shot candidates based on composition and motion.
R
1 Select u mode.
Rotate the mode dial to u (best
moment capture).
2 Choose Smart Photo Selector.
Press & (feature) to display the &
menu. Highlight Best moment cap-
ture and press J, then highlight
Smart Photo Selector and press J.
69
3 Frame the photograph.
Compose the photograph with your
subject in the center of the frame.
4 Begin buffering photographs.
Press the shutter-release button half-
displayed as the camera begins
recording images to the memory
buffer. The camera continuously
adjusts focus to account for changes
in the distance to the subject while
the shutter-release button is pressed
halfway.
R
5 Shoot.
Smoothly press the shutter-release
button the rest of the way down. The
camera will compare shots recorded
to the buffer both before and after the
shutter-release button was pressed all
the way down, and select five to copy
to the memory card. Note that some
time may be required. The best pic-
ture is displayed in the monitor when
recording is complete.
70
Smart Photo Selector
A
The camera automatically chooses a scene mode appropriate to the
subject.
Buffering
A
Buffering begins when the shutter-release button is pressed halfway
and ends after about 90 seconds or when the shutter-release button is
pressed all the way down.
Shutter-release
button pressed
halfway to focus
Shutter-release button
pressed all the way
down
Shooting ends
Buffering
Smart Photo Selector Files
Do not delete the “NCSPSLST.LST” file from the “NCFL” folder on the
memory card or change the file names of images taken with the Smart
Photo Selector. The camera will no longer recognize the affected files as
Smart Photo Selector images and will instead handle them as indepen-
dent photographs.
D
R
See Also
A
Use the Number of shots saved option in the shooting menu to
choose the number of shots selected by the Smart Photo Selector
71
❚❚ Viewing Photos Taken with the Smart Photo Selector
Press K and use the multi selector to dis-
play photographs taken with the Smart
the Smart Photo Selector are indicated by
a y icon). Of the photographs recorded
by the Smart Photo Selector, only the
best shot will be displayed (when you
press 2 to view the next picture, the
camera will skip over the best shot candi-
dates, with the result that the next pic-
ture displayed will not have a file number
that immediately follows that of the cur-
rent picture). To end playback and return
to shooting mode, press the shutter-
release button halfway.
K button
R
Choosing the Best Shot
When a photograph taken with the Smart
Photo Selector is displayed, you can
choose the best shot by pressing 3. Press
4 or 2 to view the other pictures in the
sequence and press J to select the cur-
rent picture as the best shot. To return to
normal playback, press D.
72
❚❚ Deleting Pictures
Pressing O when a picture taken with the
Smart Photo Selector is selected displays
a confirmation dialog; press O again to
delete the best shot and the best shot
candidates, or press K to exit without
deleting the pictures. Note that once
deleted, pictures can not be recovered.
O button
R
Deleting Individual Photographs
A
Pressing the O button in the best shot selec-
tion dialog displays the following options;
highlight an option using the multi selector
and press J to select.
• This image: Delete the current photo (note
that the picture currently selected as the
best shot can not be deleted).
• All except best shot: Delete the best shot candidates, but not picture cur-
rently selected as the best shot.
A confirmation dialog will be displayed; to delete the selected image or
images, highlight Yes and press J.
73
z Combining Photos with Brief Movie Vignettes
(Motion Snapshot Mode)
Record brief movie vignettes with your photographs. Each time
the shutter is released, the camera records a still image and
about 1.6 s of movie footage. When the resulting “Motion Snap-
shot” is viewed on the camera, the movie will play back in slow
motion over approximately 4 s, followed by the still image.
R
1 Select z mode.
Rotate the mode dial to z (Motion
Snapshot).
2 Frame the picture.
Compose the photograph with your
subject in the center of the frame.
74
3 Begin buffering.
Press the shutter-release button half-
displayed as the camera begins
recording footage to the memory
buffer.
4 Shoot.
Smoothly press the shutter-release
button the rest of the way down. The
camera will record a photograph,
together with about 1.6 s of movie
footage beginning before and ending
after the time the shutter-release but-
ton was pressed all the way down.
Note that some time may be required.
When recording is complete, the pho-
tograph will be displayed for a few
seconds.
R
Buffering
A
Buffering begins when the shutter-release button is pressed halfway
and ends after about 90 seconds or when the shutter-release button is
pressed all the way down.
Shutter-release
button pressed
halfway to focus
Shutter-release button
pressed all the way
down
Shooting ends
Buffering
75
❚❚ Audio
To record about four seconds of sound
with Motion Snapshots beginning at the
start of movie recording, use the multi
selector and J button to select Ambient
Motion Snapshots can also be recorded
with background music (Background
music) or no sound (None).
R
Motion Snapshot Mode
A
Movies can not be recorded using the movie-record button and the
flash can not be used.
See Also
A
are included in the movie footage. For information on saving Motion
Snapshots in a format that can be viewed in most movie playback soft-
movie portions of multiple Motion Snapshots into a single movie.
77
Viewing Motion Snapshots
Press K and use the multi selector to dis-
Snapshots are indicated by a z icon).
Pressing 3 when a Motion Snapshot is
displayed plays back the movie portion in
slow motion over a period of about 4 s,
followed by the photo; playback is
accompanied by the audio track selected
playback and return to shooting mode,
press the shutter-release button halfway.
K button
R
Deleting Motion Snapshots
To delete the current Motion Snapshot,
press O. A confirmation dialog will be dis-
played; press O again to delete the photo
and movie and return to playback, or
press K to exit without deleting the file.
Note that once deleted, Motion Snapshots
can not be recovered.
O button
78
More on Photography
t
This section describes other features you can use when taking
pictures.
Continuous Mode
Shoot a continuous series (burst) of photographs.
1 Display release mode options.
Press 4 (C) to display release mode
options.
2 Select I.
Highlight I (continuous) and press 2
to display frame rate options.
t
3 Select a frame rate.
Highlight the desired frame rate and
press J. Frame rate is expressed in
terms of the number of frames
recorded per second (fps); choose
from frame rates of approximately 5,
10, 20, 30, and 60 fps (I, Q, R,
S, and T, respectively). Except
when I is selected, the maximum
number of shots that can be recorded
in a single burst is 20.
4 Frame your subject and shoot.
Press the shutter-release button all
the way down to shoot the burst.
79
Continuous Mode
D
Only one picture will be taken if the flash fires when I is selected; at
settings of 10, 20, 30, and 60 fps, the built-in flash will not fire.
While photographs are being recorded to the memory card, the mem-
ory card access lamp will light. Depending on shooting conditions and
memory card write speed, recording may take some time. If the battery
is exhausted before all photographs are recorded, the shutter release
will be disabled and the remaining images transferred to the memory
card.
Continuous shooting is not available in creative modes other than P, S,
A, or M, in best moment capture, advanced movie, or Motion Snapshot
Buffer Size
A
The camera is equipped with a memory
buffer for temporary storage, allowing shoot-
t
ing to continue while photographs are being
saved to the memory card. The approximate
number of images that can be stored in the
memory buffer at current settings is dis-
played while the shutter-release button is
pressed halfway (this number is an approximation only and varies with
shooting conditions). The illustration shows the display when space
remains in the buffer for about 20 pictures.
Single Frame
A
To take only one picture each time the shutter-release button is
pressed all the way down, select 8 (single frame) for release mode.
80
Self-Timer Modes
The self-timer is used to delay shutter release until 10 or 2 sec-
onds after the shutter-release button is pressed all the way
down.
1 Display release mode options.
Press 4 (C) to display release mode
options.
2 Select E.
Highlight E (self-timer) and press 2 to
display self-timer options.
t
3 Select the desired self-timer option.
Use the multi selector to highlight c
or a and press J.
4 Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a sta-
ble, level surface.
81
5 Frame the photograph and shoot.
Press the shutter-release button half-
way to focus, and then press the but-
ton the rest of the way down. The self-
timer lamp will start to flash and a
beep will begin to sound. Two sec-
onds before the photo is taken, the
lamp will stop flashing and the beep-
ing will become more rapid.
Note that the timer may not start or a photograph may not be
taken if the camera is unable to focus or in other situations in
which the shutter can not be released. Turning the camera off
cancels the self-timer.
t
Movie Mode
A
To record movies using the self-timer, select advanced movie mode
and use the movie-record button to start the timer. Movie recording
ends when the movie-record button is pressed a second time.
Raising the Flash
A
In P, S, A, or M mode, press the flash pop-up button to raise the flash
before shooting. Shooting will be interrupted if the flash is raised while
the timer is counting down.
See Also
A
For information on controlling the beeps that sound when the self-
timer is used, see page 187.
82
Exposure Compensation
Exposure compensation is used to alter exposure from the value
suggested by the camera, making pictures brighter or darker.
–1 EV
No compensation
+1 EV
1 Display exposure compensation options.
Press 2 (E) to display exposure com-
t
pensation options.
2 Choose a value.
Use the multi selector to choose from
values between –3 EV (underexpo-
sure) and +3 EV (overexposure) in
1
increments of
/
3 EV. In general, posi-
tive values make the image brighter
while negative values make it darker.
Normal exposure can be restored by setting exposure compen-
sation to 0. In modes P, S, and A, exposure compensation is not
reset when the camera is turned off.
Exposure Compensation
A
Exposure compensation is most effective when used with center-
The Built-in Flash
A
When used with the built-in flash, exposure compensation affects both
background exposure and flash level.
83
The Built-in Flash
Use the built-in flash for additional lighting when the subject is
poorly lit or to “fill-in” (illuminate) back-lit subjects. The built-in
flash is available in the following shooting modes, but note that
some camera settings automatically disable the built-in flash:
Auto Pop-up Modes
In C (auto) mode and when soft, miniature effect, selective
color, cross process, or toy camera effect is selected in w (cre-
ative) mode, the flash will pop-up automatically and fire when
required.
1 Choose a flash mode.
Press 3 (N) on the multi selector to
display a list of flash modes, then use
the multi selector to highlight the
desired mode and press J to select.
t
2 Take pictures.
Press the shutter-release button half-
way to focus and the rest of the way
down to shoot. The flash will pop up
and fire when required.
84
❚❚ Flash Modes
The following flash modes are available in C (auto), q (soft),
r (miniature effect), s (selective color), 6 (cross process), and
7 (toy camera effect) modes:
• o (auto flash): When lighting is poor or the subject is backlit,
the flash pops up automatically when the shutter-release but-
ton is pressed halfway and fires as required.
• n (auto with red-eye reduction): Use for portraits. The flash
pops up and fires as required, but before it fires, the red-eye
reduction lamp lights to help reduce “red-eye.”
• s (off): The flash does not fire.
t
85
Manual Pop-up Modes
When P, S, A, or M is selected in w (creative) mode, the flash
must be raised manually. The flash will not fire if it is not raised.
1 Raise the flash.
Press the flash pop-up button to raise
the flash.
Flash pop-up button
2 Choose a flash mode.
Press 3 (N) on the multi selector to
display a list of flash modes, then use
the multi selector to highlight the
desired mode and press J to select.
t
3 Take pictures.
The flash will fire with every shot. To
disable the flash, press it gently down-
ward until it latches.
86
❚❚ Flash Modes
The following flash modes are available when P, S, A, or M is
selected in w (creative) mode:
• N (fill flash): The flash fires with every shot.
• NY (red-eye reduction): Use for portraits. The flash fires with
every shot, but before it fires, the red-eye reduction lamp lights
to help reduce “red-eye.”
• NYp (red-eye reduction with slow sync): As for “red-eye
reduction”, above, except that shutter speed slows automati-
cally to capture background lighting at night or under low
light. Use when you want to include background lighting in
portraits. Available only in modes P and A.
• Np (fill flash + slow sync): As for “fill flash”, above, except that
shutter speed slows automatically to capture background
lighting at night or under low light. Use when you want to cap-
ture both subject and background. Available only in modes P
and A.
t
• Nr (rear curtain + slow sync): As for “rear-curtain sync”, below,
except that shutter speed slows automatically to capture back-
ground lighting at night or under low light. Use when you want
to capture both subject and background. Available only in
modes P and A.
• Nq (rear-curtain sync): The flash fires just before the shutter
closes, creating a stream of light behind moving light sources
as shown below at right. Available only in modes S and M.
Front-curtain sync
Rear-curtain sync
• s (off): The flash does not fire. Available only when built-in
flash is raised.
87
Raising the Flash
D
When using the flash, be sure it is fully raised
as shown at right. Do not touch the flash dur-
ing shooting.
Lowering the Built-in Flash
A
To save power when the flash is not in use,
press it gently downward until the latch
clicks into place. Do not use force. Failure to
observe this precaution could result in prod-
uct malfunction.
The Flash-Ready Indicator
The flash-ready indicator (N) lights to show that the flash is fully
A
t
charged when the shutter-release button is pressed halfway.
Preventing the Built-in Flash from Firing
A
Lowering the flash prevents it firing in modes P, S, A, and M. The flash can
also be turned off by selecting a flash mode of s (off).
88
Using the Built-in Flash
A
If the flash is fired multiple times in quick succession, the flash and
shutter may be temporarily disabled to protect the flash. Shooting can
be resumed after a brief pause.
Objects close to the camera may be overexposed in photographs taken
with the flash at high ISO sensitivities.
To avoid vignetting, remove lens hoods and shoot at ranges of at least
0.6 m (2 ft). Some lenses may cause vignetting at greater distances or
obstruct the red-eye reduction lamp, interfering with red-eye reduc-
tion. The following illustrations show the effect of vignetting caused by
shadows cast by the lens when the built-in flash is used.
t
Shadow
See Also
Shadow
A
Aperture, Sensitivity, and Flash Range
A
Flash range varies with sensitivity (ISO equivalency) and aperture.
89
Tap Shooting Options
Tap the icon shown at right to choose the
operation performed by tapping the
monitor in shooting mode. The options
available vary with the shooting and
focus mode.
Auto Mode
Choose from the following options.
When you tap a subject in the display, the camera will focus and
take a picture.
3
Tapping the display during shooting has no effect.
7
Creative Mode
t
The operation performed by tapping the display depends on
whether the camera is in autofocus or manual focus mode.
❚❚ Autofocus Modes
The following options are available in autofocus modes (AF-A,
AF-S, and AF-C).
When you tap a subject in the display, the camera will focus and
take a picture.
3
Tap the display to position the focus area when single-point AF
4
release button halfway.
Tap a subject to start tracking when subject tracking is selected
6
Tapping the display during shooting has no effect.
7
90
❚❚ Manual Focus Mode
The following options are available in manual focus mode.
When you tap the display, the camera will take a picture without
first adjusting focus.
3
Tap a subject to display it at a higher magnification in the moni-
5
Tapping the display during shooting has no effect.
7
Advanced Movie Mode
The operation performed by tapping the display depends on
whether the camera is in autofocus or manual focus mode.
❚❚ Autofocus Modes
The following options are available in autofocus modes (AF-F
and AF-S).
t
To focus when auto-area AF or single-point AF is selected for AF-
8
area mode, tap your subject in the display.
Tap a subject to start tracking when subject tracking is selected
6
Tapping the display during shooting has no effect.
9
❚❚ Manual Focus Mode
The following options are available in manual focus mode.
Tap a subject to display it at a higher magnification in the moni-
5
Tapping the display during shooting has no effect.
9
91
Best Moment Capture/Motion Snapshot
D
Tap shooting options are not available in best moment capture and
Motion Snapshot modes.
Taking Pictures Using Tap Shooting Options
D
Avoid tapping too hard. The camera may move when the shutter is
released, blurring photographs.
The shutter-release button can be used to focus and take pictures even
when the 3 icon is displayed to show that tap shooting options are
active. Use the shutter-release button to take photographs in continu-
options can be used only to take pictures one at a time in continuous
shooting mode and can not be used to take photographs during movie
and starts the timer; the photograph will be taken after ten or two sec-
onds.
t
92
Wi-Fi
T
What Wi-Fi Can Do for You
The camera can connect via Wi-Fi wireless networks to a smart
device running Nikon’s dedicated Wireless Mobile Utility app
take pictures remotely, or pictures can be downloaded from the
camera to the smart device and shared with others on the Inter-
net. Pictures can also be uploaded from the camera to the smart
Download pictures
Share pictures
T
Remote control
93
Accessing the Camera
Before connecting via Wi-Fi (wireless LAN), install the Wireless
Mobile Utility on your Android or iOS smart device. Instructions
for accessing the camera vary with the type of connection used
by the smart device.
Android
• Push-button WPS: If the smart device supports push-button WPS
(i.e., has a WPS button connection option in its Wi-Fi settings
menu), you can use this easy method to connect to the smart
• PIN-entry WPS: If the smart device supports WPS, you can use the
camera to establish a connection by entering the PIN displayed
• View SSID: If the smart device does not support WPS, you can
connect by selecting the camera SSID on the smart device
iOS
T
• View SSID: Connect by selecting the camera SSID on the smart
Installing the Wireless Mobile Utility App
A
1 Find the app.
On the smart device, connect to the Google Play service, the App
Store, or another app marketplace and search for “Wireless Mobile
Utility”. For more information, see the instructions provided with the
smart device.
2 Install the app.
Read the app description and install the app. A pdf manual for the
Wireless Mobile Utility is available for download at the following
URLs:
• Android: http://nikonimglib.com/ManDL/WMAU/
• iOS: http://nikonimglib.com/ManDL/WMAU-ios/
WPS
A
WPS (Wi-Fi Protected Setup) is a standard designed to make it easy to
establish a secure wireless network. For information on the steps
involved and the length of time the smart device will wait for a connec-
tion, see the documentation supplied with the smart device.
94
WPS (Android Only)
1 Select Wi-Fi.
Press the G button to display the
menus, then highlight Wi-Fi and press
J.
2 Connect.
Enable WPS button connections on
the camera and smart device:
• Camera: Highlight Wi-Fi connection
type and press 2, then highlight
Push-button WPS and press 2 to
ready the camera for a WPS connec-
tion. The camera will wait about two
minutes for a WPS connection
request from the smart device. To
extend the wait time, press J.
T
• Smart device: Select Wi-Fi settings >
WPS button connection.
3 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device. The
main dialog will be displayed.
95
PIN Entry (Android Only)
1 Select Wi-Fi.
Press the G button to display the
menus, then highlight Wi-Fi and press
J.
2 Select Wi-Fi connection type > PIN-entry WPS.
Highlight Wi-Fi connection type and
press 2.
T
Highlight PIN-entry WPS and press
2.
3 Enter the PIN.
Enter the PIN displayed by the smart device. Press 4 or 2 to
highlight digits and press 1 or 3 to change. Press J when
entry is complete.
4 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device. The
main dialog will be displayed.
96
SSID (Android and iOS)
1 Select Wi-Fi.
Press the G button to display the
menus, then highlight Wi-Fi and press
J.
2 Select Connect.
Highlight Connect and press 2.
T
3 Select Yes.
Highlight Yes and press J to view the
camera SSID.
4 Select the camera SSID on the smart device.
Select the camera SSID in the list of networks displayed by
the smart device.
97
5 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device. The
main dialog will be displayed.
❚❚ Restoring Default Settings
To restore default network settings, highlight Wi-Fi connection
type > Reset Wi-Fi settings and press 2. A confirmation dialog
will be displayed; highlight Yes and press J to restore default
network settings.
Wi-Fi
D
to prevent loss of power while connected, you should also charge the
camera battery. Do not use Wi-Fi in settings in which its use is prohib-
ited. Note that the camera Wi-Fi function can not be used when a USB
or HDMI cable is connected.
Terminating Wi-Fi Connections
A
Wi-Fi will terminate automatically if the smart device does not initiate a
connection within five minutes. To terminate Wi-Fi manually, press the
G button to exit the Wi-Fi standby or connection display.
T
98
Uploading Pictures to a Smart Device
Follow the steps below to upload photos from the camera to a
smart device. Movies can not be selected for upload.
Uploading Photos One at a Time
Use the Wi-Fi upload option in the playback & (feature) menu
playback.
1 Display the photo on the camera.
Display the desired photo in full-frame playback.
2 Select Wi-Fi upload.
Press & (feature) to display the &
menu, then highlight Wi-Fi upload
and press J. A confirmation dialog
will be displayed.
T
3 Select Yes.
Highlight Yes and press J. To upload
multiple selected photos, choose
Select images from list and proceed
to Step 2 on page 101.
4 Select the camera SSID on the smart device.
Select the camera SSID in the list of networks displayed by
the smart device.
99
5 Download the photo to the smart device.
Launch the Wireless Mobile Utility on the smart device and
follow the on-screen instructions to download the photo.
When download is complete, press the G button on the
camera to terminate the Wi-Fi connection.
T
100
Uploading Multiple Selected Photos
To upload multiple selected photos, use the Wi-Fi upload
option in the playback menu.
1 Choose Wi-Fi upload.
Press the G button to display the
menus. Highlight Wi-Fi upload in the
playback menu and press 2.
G button
T
2 Select photos.
Press 4 or 2 to scroll through pictures
and press 3 to select or deselect, or
press and hold 1 to view the high-
lighted picture full frame. Selected
images are indicated by a & icon.
3 Press J.
Press J to complete the operation. A confirmation dialog will
be displayed.
101
4 Select Yes.
Highlight Yes and press J.
5 Select the camera SSID on the smart device.
Select the camera SSID in the list of networks displayed by
the smart device.
6 Download the photos to the smart device.
Launch the Wireless Mobile Utility on the smart device and
follow the on-screen instructions to download the selected
photos. When download is complete, press the G button
on the camera to terminate the Wi-Fi connection.
T
102
More on Playback
I
Photo Information
Photo information is superimposed on images displayed in full-
selected using the Display > Playback option in the setup
❚❚ Basic Info
1
2
3
112 2
3
11
13
4
10
9
10
9
4
8
7
6
5
8
7
6
5
Still images
Movies
I
2 Protect status.................................... 131 7 Time of recording ......................25, 189
3 Frame number/total number of
images
4 Image quality.................................... 143 10 Rating ..................................................110
Frame rate................................. 166, 167 11 Movie length........................................60
5 Image size.......................................... 143 12 Audio recording indicator ..............168
103
❚❚ Detailed info
29
1
2
3
4
5
6
16
15
14
13
12
11
28
7
17
18
19
8
27
26
25
10 9
24 23 22 21 20
Still images
1
2 30 31 4
5
3
6
28
13
12
26
25
14
27
17
24 23 22 21 20
I
Movies
1 Shooting mode
2 Frame number/total number of
images
Exposure mode .................................142
3 Protect status.....................................131 15 Shutter speed ............................... 42, 44
5 Retouch indicator ...........132, 133, 134 17 Picture Control ..................................176
6 Histogram showing distribution of
tones in image .................................105 20 Image quality ....................................143
7 ISO sensitivity ....................................175 Frame rate .................................166, 167
8 Focal length .......................................223 21 Image size...........................................143
104
22 Folder number-file number
23 Time of recording ......................25, 189 28 Rating ..................................................110
24 Date of recording.......................25, 189 29 Auto distortion control ...................150
25 Battery indicator .................................27 30 Electronic VR......................................154
26 White balance....................................170 31 Audio recording indicator ..............168
White balance fine-tuning .............171
Folder and File Numbers
A
Photographs are stored as files with names containing a four-digit
number between 0001 and 9999 assigned automatically in ascending
order by the camera. These in turn are stored in folders containing up
to 999 images. A new folder is created automatically when file number-
ing reaches 9999 or the number of images in the current folder reaches
999.
100-0001
Folder number
File number
A
Camera histograms are intended only as a guide and may differ from
those in imaging applications. Sample histograms are shown below:
• If brightness varies evenly across the
I
image, the distribution of tones
will be relatively even.
• If the image is dark, tone distribu-
tion will be shifted to the left.
• If the image is bright, tone distribu-
tion will be shifted to the right.
Exposure compensation shifts the distribution of tones to the right
when raised, to the left when lowered. Histograms can give you a rough
idea of overall exposure when bright ambient lighting makes it difficult
to see the display in the monitor.
105
Thumbnail Playback
To view pictures in “contact sheets” of 4, 9, or 16 images, press J
when a picture is displayed full frame and rotate the multi selec-
tor counterclockwise.
The following operations can be performed:
To
Use
Description
Rotate the multi selector counterclockwise
to increase the number of images displayed
from 1 to 4, from 4 to 9, or from 9 to 16. To
view images taken on selected dates
wise when 16 images are displayed.
Display more
images
Rotate the multi selector clockwise to
reduce the number of images displayed
from 16 to 9 or 9 to 4. To view the high-
lighted image full frame, rotate the selector
clockwise when 4 images are displayed.
Display fewer
images
I
Use the multi selector to highlight images.
Highlight
images
View
highlighted
image
Delete
highlighted
image
Press J to view the highlighted image full
frame.
J
O
See page 109.
106
Calendar Playback
To view pictures taken on a selected date, rotate the multi selec-
The following operations can be performed:
To
Use
Description
To view the calendar, rotate the multi selec-
tor counterclockwise when 16 images are
Display
calendar
To return to the 16-image display, rotate the
multi selector clockwise when the calendar
is displayed.
Exit to
thumbnail
playback
I
Use multi selector to highlight date in calen-
dar display.
Highlight date
View pictures
taken on
highlighted
date
Delete pictures
taken on
highlighted
date
Press J to view the first picture taken on
the highlighted date.
J
O
Press O to delete all pictures taken on the
highlighted date.
107
Playback Zoom
To zoom in on a photograph, display it full frame and press J
and rotate the multi selector clockwise. Playback zoom is not
available with movies or Motion Snapshots.
The following operations can be performed:
To
Use
Description
Rotate the multi selec-
tor clockwise to zoom
Zoom in
in, counterclockwise to
zoom out. Whenever
you zoom in or out, a
navigation window will
appear with the area
Zoom out
currently visible in the display indicated by a yel-
low border. Press 1, 3, 4, or 2 to scroll the
image.
View other
areas of
image
I
Faces (up to five)
detected during face
priority are indicated by
white borders in the
navigation window.
Press 4 or 2 to view
other faces.
View faces
Exit zoom
Return to full-frame playback.
J
See Also
A
to choose whether the multi selector to be used to scroll from face to
face during face-priority zoom.
108
Deleting Pictures
Pictures can be deleted from the memory card as described
below. Note that once deleted, pictures can not be recovered; pro-
tected images, however, will not be deleted.
Deleting the Current Picture
To delete the picture currently displayed
in full-frame playback or selected in the
thumbnail list, press O. A confirmation
dialog will be displayed; press O again to
delete the picture and return to playback,
or press K to exit without deleting the
O button
picture.
The Playback Menu
To delete multiple images, press the G button, select Delete
in the playback menu, and choose from the options below. A
confirmation dialog will be displayed; select Yes to delete the
images (note that some time may be required if a large number
of images is selected).
I
Highlight images and press 3 to select or dese-
complete.
Delete all images
Delete all pictures on the memory card.
109
Rating Pictures
Rate pictures or mark them as candidates for later deletion. Rat-
ing is not available with protected images.
1 Select a picture.
Display a picture in full-frame playback.
2 Select Rating.
Press & (feature) to display the &
menu. Highlight Rating and press J.
3 Choose a rating.
I
Highlight a rating of from zero to five
stars, or select ) to mark the picture as
a candidate for later deletion. Press J
to select the highlighted rating.
110
Slide Shows
To view a slide show of the pictures on
the memory card, press the G button,
select Slide show in the playback menu,
and follow the steps below.
G button
1 Select the type of image used in the show.
Highlight the desired option and press J.
All images
Display all the images on the memory card.
Display still images only. Images taken using Easy
Still images panorama will be displayed in panorama mode
Display movies and Motion Snapshots recorded with
Movies
Display Motion Snapshots recorded with NMS files
portion will be played; the associated photographs
I
Motion Snapshot
are not displayed.
Display
only
images
recorded on
a
selected
Select images by date. A calendar will be
date displayed; use the multi
selector to highlight
date.
a
111
2 Adjust display times and audio settings.
Adjust the following options:
Frame interval Choose how long each still image is displayed.
Choose how much of each movie is played back
before the next slide is displayed. Choose Same as
Movie playback frame interval to display the next slide after the
time
time selected for Frame interval, No limit to play
back the entire movie before displaying the next
slide.
Mute audio playback, or select Movie sound tracks
to play audio recorded with movies and with Motion
Snapshots recorded with Ambient selected for
Audio
3 Select Start.
Highlight Start and press J to start
the slide show.
I
112
The following operations can be performed while a slide
show is in progress:
To
Use
Description
Skip back/skip
ahead
Press 4 to return to the previous frame,
2 to skip to the next frame.
Pause/resume
J
Pause the show. Press again to resume.
Rotate the multi selector to adjust vol-
ume.
Adjust volume
Exit to playback
mode
End the show and return to playback
mode.
K
The options shown at right are dis-
played when the show ends. Select
Resume to restart or Exit to exit to the
playback menu.
I
113
Connections
Q
Installing the Supplied Software
Install the supplied software to copy pictures to your computer
for viewing and editing. Before installing the software, confirm
that your system meets the requirements on page 116.
1 Launch the installer.
Start the computer, insert
the ViewNX 2 installer CD,
and launch the installer. A
language-selection dialog
will be displayed; if the
desired language is not
available, click Region
Selection to choose a dif-
ferent region and then
q Select region (if required)
w Select language
e Click Next
choose the desired language (region selection is not avail-
able in the European release).
2 Start the installer.
Q
Click Install and follow the
Click Install
on-screen instructions.
114
3 Exit the installer.
Click Yes (Windows) or OK (Mac) when installation is com-
plete.
Windows
Mac
Click Yes
Click OK
4 Remove the installer CD from the CD-ROM drive.
Supplied Software
A
Be sure to update to the latest versions of the supplied software.
Nikon Message Center 2 will periodically check for updates while the
computer is connected to the Internet.
Motion Snapshots
A
ViewNX 2 is required to view Motion Snapshots saved using the File
Supported Operating Systems
A
ported operating systems.
Q
115
System Requirements
The system requirements for ViewNX 2 are:
Windows
• Photos: Intel Celeron, Pentium 4, Core Series; 1.6 GHz or
better
• Movies (playback): Pentium D 3.0 GHz or better; Intel Core
i5 or better recommended when viewing movies with a
frame size of 1280 × 720 or more at a frame rate of
30 fps or above or movies with a frame size of 1920 ×
1080 or more
CPU
• Movies (editing): Intel Core i5 or better
Pre-installed versions of Windows 8.1, Windows 7, or
Windows Vista
OS
• 32-bit Windows 8.1, Windows 7, or Windows Vista: 1 GB or more
(2 GB or more recommended)
• 64-bit Windows 8.1, Windows 7, or Windows Vista: 2 GB or more
(4 GB or more recommended)
Memory (RAM)
A minimum of 1 GB available on the startup disk (3 GB or
more recommended)
• Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels or
more recommended)
Hard disk space
Graphics
• Color: 24-bit color (True Color) or more
Q
116
Mac
• Photos: Intel Core or Xeon series
• Movies (playback): Core Duo 2 GHz or better; Intel Core i5
or better recommended when viewing movies with a
frame size of 1280 × 720 or more at a frame rate of
30 fps or above or movies with a frame size of 1920 ×
1080 or more
• Movies (editing): Intel Core i5 or better
OS X 10.9, 10.8, or 10.7
CPU
OS
Memory (RAM) 2 GB or more (4 GB or more recommended)
A minimum of 1 GB available on the startup disk (3 GB or
more recommended)
Hard disk space
• Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels
or more recommended)
Graphics
• Color: 24-bit color (millions of colors) or more
Q
117
Viewing and Editing Pictures on a Computer
Transferring Pictures
1 Choose how pictures will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the
memory card is inserted in the camera. Connect the camera
to the computer using the supplied USB cable (do not use
force or insert the connectors at an angle) and then turn the
camera on.
• Card slot: If your computer is equipped with a slot for
microSD memory cards, the card can be inserted directly in
the slot.
Q
• Card reader: Connect a card reader (available separately from
third-party suppliers) to the computer and insert the mem-
ory card.
118
2 Start the Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a pro-
gram, select Nikon Transfer 2.
Windows 7
A
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1
Under Import pictures and
videos, click Change pro-
gram. A program selection
dialog will be displayed;
select Import File using
Nikon Transfer 2 and click
OK.
2
Double-click Import file.
3 Click Start Transfer.
At default settings, all the
pictures on the memory
card will be copied to the
computer.
Q
Click Start Transfer
4 Terminate the connection.
If the camera is connected to the computer, turn the camera
off and disconnect the USB cable. If you are using a card
reader or card slot, choose the appropriate option in the com-
puter operating system to eject the removable disk corre-
sponding to the memory card and then remove the card from
the card reader or card slot.
119
Viewing Pictures
Pictures are displayed in
ViewNX 2 when transfer is com-
plete.
Starting ViewNX 2 Manually
A
• Windows:
Double-click
the
ViewNX 2 shortcut on the desk-
top.
• Mac: Click the ViewNX 2 icon in
the Dock.
❚❚ Retouching Photographs
To crop pictures and perform
such tasks as adjusting sharp-
ness and tone levels, click the
Edit button in the toolbar.
❚❚ Printing Pictures
Click the Print button in the
toolbar. A dialog will be dis-
played, allowing you to print
pictures on a printer connected
to the computer.
Q
For More Information
A
Consult online help for more infor-
mation on using ViewNX 2.
120
Viewing Pictures on TV
Connect the camera to a television for playback.
Connecting an HDMI Cable
A
Always turn the camera off before connecting or disconnecting HDMI
cables. When connecting cables, do not use force or attempt to insert
the connectors at an angle.
High-Definition Devices
A type D High-Definition Multimedia Interface (HDMI) cable
(available separately from third-party suppliers) can be used to
connect the camera to high-definition video devices.
1 Connect the HDMI cable.
Turn the camera off and connect the HDMI cable.
Q
Connect to HD device
(choose cable with
Connect type D
connector to camera
appropriate connector)
2 Tune the device to the HDMI channel.
3 Turn the camera on.
Turn the camera on; the camera monitor will remain off and
the camera shooting mode display will appear on the HD
device. Pictures can be played back using camera controls as
described elsewhere in this manual; note that the edges of
images may not be visible in the display.
121
Close the Connector Cover
D
Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.
Television Playback
A
Volume can be adjusted using the controls on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5E power connector (available separately) is recommended for
extended playback.
Electronic VR
A
cable is connected.
❚❚ HDMI Device Control
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia Interface–Consumer
Electronics Control), select On for HDMI device control in the
camera setup menu. For information on using a remote control,
see the television manual.
Q
122
Printing Photographs
Selected JPEG images can be printed on a PictBridge printer
connected directly to the camera.
Connecting the Printer
Connect the camera using the supplied USB cable.
1 Turn the camera off.
2 Connect the USB cable.
Turn the printer on and connect the USB cable as shown. Do
not use force or attempt to insert the connectors at an angle.
Q
3 Turn the camera on.
A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display. To print pictures one at a
or all pictures, proceed to page 126.
Selecting Photographs for Printing
D
printing. If Motion Snapshots are selected, only the photographs will
be printed; the movie portion will not be printed. If photographs taken
with the Smart Photo Selector are selected, only the best shot will be
printed.
Panoramas
D
Some printers may not print panoramas, while at some settings others
may not print entire panoramas. See the printer manual or consult the
manufacturer for details.
123
Printing Pictures One at a Time
1 Display the desired picture.
Press 4 or 2 to view additional pictures. Rotate the multi
rotate the multi selector counterclockwise to exit zoom). To
view nine pictures at a time, rotate the selector counterclock-
wise when a picture is displayed full frame. Press 1, 3, 4, or
2 to highlight pictures, or rotate the multi selector clockwise
to display the highlighted picture full frame.
2 Adjust printer settings.
Press J to display the following items, then press 1 or 3 to
highlight an item and press 2 to view options (only options
supported by the current printer are listed; to use the default
option, select Use printer settings). After selecting an
option, press J to return to the printer settings menu.
Option
Description
Page size Choose a page size.
This option is listed only when pictures are printed one
at a time. Press 1 or 3 to choose number of copies
(maximum 99).
Number of
copies
Q
Print border Choose whether to frame photos in white borders.
Print time Choose whether to print the times and dates of record-
stamp
ings on photos.
This option is listed only when pictures are printed one
at a time. To exit without cropping, highlight No and
press J. To crop the current picture, highlight Yes and
press 2. A crop selection dialog will be displayed;
rotate the multi selector clockwise to increase the size
of the crop, counterclockwise to decrease. Press 1, 3,
4, or 2 to position the crop. Note that print quality
may drop if small crops are printed at large sizes.
Crop
124
Printing Multiple Pictures
1 Display the PictBridge menu.
Press the G button in the PictBridge playback display
2 Choose an option.
Highlight one of the following options and press 2.
• Select images for printing: Select pictures for printing. Press 4
or 2 to highlight pictures and press 1 or 3 to choose the
number of prints (up to 99).
• Print DPOF print order: Print the current DPOF print order
printing as described above under “Select images for print-
ing”.
• Index print: To create an index print of all JPEG pictures on the
memory card, proceed to Step 3. Note that if the memory
card contains more than 256 pictures, a confirmation dialog
will be displayed and only the first 256 images will be
printed. A warning will be displayed if the page size selected
in Step 3 is too small.
Q
3 Adjust printer settings.
Adjust printer settings as described in Step 2 on page 124.
4 Start printing.
Highlight Start printing and press J to start printing. To
cancel before all copies have been printed, press J again.
Errors
A
printing.
126
Creating a DPOF Print Order: Print Set
The DPOF print order option is used to
create digital “print orders” for Pict-
Bridge-compatible printers and devices
that support DPOF. Press the G but-
ton, select DPOF print order in the play-
back menu, and choose from the
following options:
Press 4 or 2 to highlight pictures
ture for printing, press 1. The pic-
ture will be marked with a Z icon
and the number of prints will be
set to 1; press 1 or 3 to specify the
number of prints (up to 99; to dese-
lect the picture, press 3 when the number of prints is 1).
Select/set
When the selection is complete, press J to display printing
options. Highlight Print shooting info (print the shutter
speed and aperture on all pictures in the print order) or Print
date (print the date of recording on all pictures in the print
order) and press 2 to select or deselect, and then press J to
complete the print order.
Q
Reset Remove all pictures from the print order.
DPOF Print Order
D
DPOF date and shooting info options are not supported when printing
via direct USB connection; to print the date of recording on photo-
graphs in the current print order, use the PictBridge Print time stamp
The DPOF print order option can not be used if there is not enough
space on the memory card to store the print order. For restrictions on
the types of images that can be selected for printing, see page 123.
Print orders may not print correctly if images are deleted using a com-
puter or other device after the print order is created.
127
The Playback Menu
o
To display the playback menu, press G and select Playback.
G button
The playback menu contains the following options:
Option
Delete
Description
Delete multiple images.
Default
—
0
Image type: All images
Frame interval: 4 s
Same as frame interval
View movies and photos in a slide
show.
Slide show
Audio: Movie sound tracks
Choose whether pictures are
displayed after shooting.
Rotate “tall” (portrait-orientation)
Image review
On
On
Rotate tall pictures for display during
playback.
Upload selected photos to smart
devices via wireless networks.
o
Wi-Fi upload
—
—
101
DPOF print
order
Create digital “print orders”.
Protect pictures from accidental
deletion.
Rate pictures.
Protect
—
—
131
Rating
128
Option
Description
Default
0
Brighten shadows in dark or back-
lit photos, creating a retouched
copy that is saved separately from
the unmodified original.
Create small copies of selected
pictures.
D-Lighting
—
Choose size:
1280×856; 1.1 M
Resize
Crop
Create cropped copies of selected
pictures.
Aspect ratio: 3 : 2
Choose whether 4 and 2 can be
Face-priority used during playback zoom
On
zoom
with face priority.
Create copies of movies from
Edit movie which unwanted footage has
—
—
—
been trimmed.
Combine
4-second
movies
Combine multiple 4-second
movies into a single movie.
Make a movie from the movie
portions of multiple Motion
Snapshots.
Combine
NMS movies
Playback
A
The camera may be unable to display or retouch images that were cre-
ated or have been edited with other devices.
o
Image Quality
A
Copies created from JPEG photos are the same quality as the original
options are used with pictures taken at an image quality of NEF (RAW)
+ JPEG fine, the JPEG image will be retouched and saved as a fine-qual-
ity JPEG copy.
129
Image Review
If On is selected, pictures will be displayed immediately after
shooting. To view pictures when Off is selected, press the K but-
ton.
Rotate Tall
Choose whether to rotate “tall” (portrait-orientation) pictures for
display during playback. Note that because the camera itself is
already in the appropriate orientation during shooting, images
are not rotated automatically during image review.
“Tall” (portrait-orientation) pictures are automatically rotated
for display in the camera monitor. Pictures taken with Off
On
“wide” (landscape) orientation.
“Tall” (portrait-orientation) pictures are displayed in “wide”
(landscape) orientation.
Off
Protect
Protect selected images from accidental deletion. Note that this
option does NOT protect files from deletion when the memory
o
Select/set select or deselect. Press J to exit when the operation is com-
plete.
Reset
Remove protection from all pictures.
Rating
complete.
131
D-Lighting
Applied to selected images, D-Lighting creates copies that have
been processed to brighten shadows.
Before
After
Press 4 or 2 to highlight an image
options shown at right. Press 1 or 3 to
choose the amount of correction per-
formed (the effect can be previewed in
the display) and press J to create a
retouched copy.
D-Lighting
D
Noise (randomly-spaced bright pixels, fog, or lines) may appear in cop-
ies created with D-Lighting. Uneven shading may be visible with some
subjects.
Image Size
o
A
Copies are the same size as the original.
132
Resize
Create small copies of selected photo-
graphs. Select Choose size and choose a
size from 1280×856; 1.1 M (1280 × 856 pix-
els), 960×640; 0.6 M (960 × 640 pixels), and
640×424; 0.3 M (640 × 424 pixels), and
then choose Select images Press 4 or 2
.
When the selection is complete, press J to display a confirma-
tion dialog and select Yes to save the resized copies.
Resized Copies
D
Playback zoom may not be available with resized copies.
o
133
Crop
Create a cropped copy of selected photographs.
To select an image for trimming, choose Select images,
Select images
Aspect ratio
Choose from aspect ratios of 3 : 2, 4 : 3, 1 : 1, and 16 : 9.
The selected image will be displayed with
a default crop of the selected aspect ratio
shown in yellow. Use the controls below
to size and position the crop and save the
copy.
To
Use
Description
Decrease crop
size
Rotate the multi selector counterclockwise
to decrease the size of the crop.
Increase crop
size
Rotate the multi selector clockwise to
increase the size of the crop.
Position crop
Create copy
Press 1, 3, 4, or 2 to position the crop.
J
Save the current crop as a separate file.
o
Cropped Copies
D
Playback zoom may not be available with
cropped copies. The size of the copy varies
with crop size and aspect ratio and appears
at upper left in the crop display.
134
Face-Priority Zoom
If On is selected, 4 and 2 can be used during playback zoom to
select faces detected with face priority. If Off is selected, 4 and
2 can be used with 1 and 3 to scroll the display.
Edit Movie
Trim footage from movies to create edited copies.
1 Choose an edit option.
Highlight one of the following options
and press 2:
• Choose start point: Remove all frames
before a chosen starting frame.
Start point
• Choose end point: Remove all frames after a chosen closing
frame.
End point
o
2 Select a movie.
select.
135
3 Pause the movie on opening or closing frame.
Play the movie back, pressing J to
begin and resume playback and 3 to
cated by a h icon in the display, the
last frame by i). While playback is
paused, press 4 or 2 to rewind or
advance one frame at a time. Pause
playback when you reach the frame
that will become the new opening or
closing frame.
4 Delete the unwanted frames.
Press 1 to delete all frames before
(Choose start point) or after (Choose
end point) the current frame.
5 Save the copy.
Highlight Yes and press J to save the
edited copy. If necessary, the copy can
be trimmed as described above to
remove additional footage.
o
Trimming Movies
D
Movies must be at least two seconds long. If a copy can not be created
at the current playback position, the current position will be displayed
in red in Step 4 and no copy will be created. The copy will not be saved
if there is insufficient space available on the memory card.
To prevent the camera from turning off unexpectedly, use a fully-
charged battery when editing movies.
136
Combine 4-Second Movies
Combine up to eight 4-second movies into a single movie (4-sec-
ond movies are recorded using the 4-second movie option in
advanced movie mode; for more information, see page 57).
1 Select movies.
Select 4-second movies as described
the order in which the clips will appear
in the final movie. To preview a clip,
highlight it and press 1.
2 Combine the selected movies.
Press J. A confirmation dialog will be displayed; select Yes to
join the selected clips and their audio tracks into a new
movie, which is stored separately from its component clips.
o
137
Combine NMS Movies
Combine the movie segments of up to eight NMS-format Motion
1 Select Motion Snapshots.
Select Motion Snapshots as described
the order in which the clips will appear
in the final movie. To preview the
movie portion of the highlighted
Motion Snapshot, press 1.
2 Combine the selected Motion Snapshots.
Press J. A confirmation dialog will be displayed; select Yes to
join the movie portions of the selected Motion Snapshots
into a new movie, which is stored separately from its compo-
nent clips. Any audio included in Motion Snapshots recorded
new movie.
o
138
The Shooting Menu
i
To display the shooting menu, press G and select Shooting.
G button
The shooting menu contains the following options:
Option
Description
Default
—
0
Reset shooting Reset shooting options to
options
Creative
default values.
Choose a creative mode.
Choose from Active Selection,
Slow view, and Smart Photo
Selector.
Creative Palette
Best moment
capture
Active Selection
Choose how the camera sets
shutter speed and aperture in
and when Active Selection or
Slow view is chosen in best
moment capture mode.
Choose a file format and
compression ratio.
Exposure
mode
Scene auto selector
Image quality
Image size
JPEG fine
i
5232 × 3488; 18.2 M
panorama (panoramas)
Choose the frames Active
On release, record:
Preceding and following
Active
Selection
temporary storage, the length
of time over which the frames
1 s
are captured, and the default
Frames saved (default): 1
number of frames saved.
139
Option
Description
Default
0
Choose the number of shots
selected by the Smart Photo
Number of
shots saved
5
Choose when the movie
portion of Motion Snapshots is
Movie before/
after
1.0 s : 0.6 s
Choose a file format for new
Choose the audio recorded
Choose the hue that appears in
color in pictures taken with
Selective color selected in
creative mode.
File format
Audio
NMS files
Background music
Select color
—
Choose amount of softening
applied to pictures taken with
Soft selected in creative mode. Filter strength: Normal
Soft
Hue
You can also choose how
softening applies to pictures
with portrait subjects.
Portrait: On
Choose base hue for pictures
taken with Cross process
selected in creative mode.
Adjust saturation and
Blue
Toy camera
effect
vignetting for pictures taken
with Toy camera effect
selected in creative mode.
Choose how the camera
meters exposure.
Choose whether the camera
corrects barrel and pin-cushion
distortion.
Saturation: Normal
Vignetting: Normal
i
Metering
Matrix
Off
Autodistortion
control
140
Option
Description
Choose a color space for new
pictures.
Default
0
Color space
sRGB
Active
D-Lighting
Avoid loss of detail in
highlights and shadows.
On
Off
Long exposure Reduce noise in long time-
NR
exposures.
Choose whether to use optical
vibration reduction with
compatible 1 NIKKOR lenses.
Choose whether to use
electronic vibration reduction
in Motion Snapshot mode
Optical VR
On
Electronic VR
Off
Choose how the camera
focuses.
Focus mode
See page 156
Choose how the focus area is
selected.
Face-priority Turn face priority on or off.
AF-area mode
Auto-area
On
On
Built-in AF
assist
Control the built-in AF-assist
illuminator.
Choose a flash mode for the
built-in flash.
Flash control
TTL (Manual: Full)
Flash
compensation
Control flash output.
0.0
Underwater Choose Enable when using an
flash optional underwater flash unit.
Disable
i
141
Reset Shooting Options
Select Yes to reset the options in the shooting menu and other
Exposure Mode
The options in the exposure mode menu offer varying degrees
of control over shutter speed and aperture in Motion Snapshot
tion or Slow view is chosen in best moment capture mode
An automatic, “point-and-shoot” mode in which the
Scene auto camera not only chooses shutter speed and aperture
h
selector
but adjusts other settings to suit the subject (automatic
The camera sets shutter speed and aperture for optimal
P
S
auto
other situations in which there is little time to adjust
camera settings.
You choose the shutter speed; the camera selects an
motion.
Shutter-
priority auto
You choose the aperture; the camera selects a shutter
Aperture-
A
priority auto ground or bring both foreground and background into
i
focus.
Manual
M
shutter speed to “Bulb” for long time-exposures.
142
Image Quality
Choose a file format and compression ratio for photographs.
Option File type
Description
Compressed 12-bit raw data from the image sensor
are saved directly to the memory card. White bal-
ance, contrast, and other settings can be adjusted
on a computer after shooting.
NEF (RAW)
NEF
Record JPEG images at a compression ratio of
roughly 1 : 4 (fine quality).
Record JPEG images at a compression ratio of
roughly 1 : 8 (normal quality).
JPEG fine
JPEG
JPEG normal
NEF (RAW) + NEF/ Two images are recorded: one NEF (RAW) image
JPEG fine JPEG and one fine-quality JPEG image.
Image Size
Choose the size of photographs.
❚❚ Standard Photographs
The following options are available in still image and Smart
Photo Selector modes and when an option other than Easy pan-
orama is selected in creative mode.
Option
Size (pixels) Approximate print size at 300 dpi (cm/in.) *
# 5232×3488; 18.2 M 5232 × 3488
$ 3920×2616; 10.3 M 3920 × 2616
% 2608×1744; 4.5 M 2608 × 1744
44.3 × 29.5/ 17.4 × 11.6
33.2 × 22.1/ 13.1 × 8.7
22.1 × 14.8/ 8.7 × 5.8
i
* Print size in inches equals image size in pixels divided by printer resolution
in dots per inch (dpi; 1 inch=approximately 2.54 cm).
143
❚❚ Panoramas
The following options are available when Easy panorama is
selected in creative mode.
Approximate print size at 300 dpi
Option
Size (pixels) 1
(cm/in.) 2
Camera panned
horizontally: 4800 × 920
Camera panned
vertically: 1536 × 4800
Camera panned
horizontally: 9600 × 920
Camera panned
vertically: 1536 × 9600
40.6 × 7.8/16.0 × 3.1
Normal
panorama
A
13.0 × 40.6/5.1 × 16.0
81.3 × 7.8/32.0 × 3.1
13.0 × 81.3/5.1 × 32.0
Wide
panorama
B
1 Figures for horizontal and vertical panorama are reversed if camera is
rotated 90 degrees.
2 Print size in inches equals image size in pixels divided by printer resolution
in dots per inch (dpi; 1 inch=approximately 2.54 cm).
i
144
NEF (RAW)/NEF (RAW) + JPEG
A
The option selected for image size does not affect the size of NEF (RAW)
images. NEF (RAW) images can be viewed on the camera or using soft-
(supplied).
When photographs taken at NEF (RAW) + JPEG are viewed on the cam-
era, only the JPEG image will be displayed. When photographs taken at
these settings are deleted, both NEF and JPEG images will be deleted.
File Names
A
Photos and movies are stored as image files with names of the form
“xxx_nnnn.yyy,” where:
• xxx is either NMS (Motion Snapshots recorded with NMS files
Snapshots, and movies),
• nnnn a four-digit number between 0001 and 9999 assigned automat-
ically in ascending order by the camera, and
• yyy one of the following three-letter extensions: “NEF” for NEF (RAW)
images, “JPG” for JPEG images, or “MOV” for movies.
The NEF and JPEG files recorded at settings of NEF (RAW)+JPEG have
the same file names but different extensions. Copies created with the
retouch options in the playback menu have file names beginning with
“CSC” (e.g., “CSC_0001.JPG”). Images recorded with Adobe RGB
underscore (e.g., “_DSC0001.JPG”).
Image Quality and Size
A
Together, image quality and size determine how much space each pho-
tograph occupies on the memory card. Larger, higher quality images
can be printed at larger sizes but also require more memory, meaning
i
145
Active Selection
storage, the length of time over which the frames are captured,
and the default number of frames saved.
❚❚ On Release, Record
Choose the frames copied from the buffer to temporary storage
when the shutter-release button is pressed all the way down.
The camera captures the 20 preceding frames.
Preceding
frames
Shutter release button fully pressed
The camera captures the 10 preceding frames and 10 fol-
lowing frames.
Shutter release button
fully pressed
Preceding
and
following
❚❚ Capture 20 Frames Over
Choose whether the frames are captured over 1
of 60 fps) or over 1 s (20 fps).
/3 s (a frame rate
❚❚ Frames Saved (Default)
Choose the number of frames selected by default in the confir-
mation dialog displayed when shooting is complete: the frame
recorded to the buffer when the shutter-release button was
pressed (1) or all the frames in temporary storage (All).
i
Number of Shots Saved
Choose the number of shots selected by the Smart Photo Selec-
tor. If 5 is selected, the camera will save the best shot and 4 best
shot candidates. If 1 is selected, the camera will save only the
best shot.
146
Movie Before/After
Choose whether the movie portions of Motion Snapshots end
when the shutter-release button is pressed all the way or about
for the Motion Snapshot will feature the last frame of the movie.
Movie footage starts about a second before the shutter-
release button is pressed all the way down and ends about
0.6 s after.
Shutter-release button
pressed halfway
Shutter-release button
pressed all the way down
1.0 s : 0.6 s
1.0 s
0.6 s
Movie footage
The camera records about 1.6 s of movie footage, ending
when the shutter-release button is pressed all the way down.
Shutter-release button
pressed halfway
Shutter-release button
pressed all the way down
1.6 s : 0 s
1.6 s
Movie footage
i
147
File Format
Motion Snapshots are recorded as a 4 s MOV file and a JPEG
NMS files
MOV file
image. Motion Snapshots can only be viewed on the cam-
Motion Snapshots are recorded as a 10 s MOV file that can
be viewed in a variety of computer applications. The Motion
Snapshot is not displayed automatically when shooting
movies, see page 60.
Soft
Choose amount of softening applied to pictures taken with Soft
selected in creative mode. You can also choose how softening
applies to portrait subjects.
❚❚ Filter strength
Choose from High, Normal, and Low.
❚❚ Portrait
If On is selected and the camera detects portrait subjects (up to
three), softening will be adjusted to make them stand out. If Off
is selected, softening will be applied equally to the portrait sub-
ject and the background.
i
148
Toy Camera Effect
Adjust saturation and vignetting for pictures taken with Toy
camera effect selected in creative mode.
❚❚ Saturation
Choose from High, Normal, and Low.
❚❚ Vignetting
Choose the amount of vignetting from High, Normal, and Low.
Metering
Choose how the camera sets exposure.
The camera meters a wide area of the frame and adjusts for
L Matrix contrast (tone distribution), color, composition, and subject
distance, producing natural results in most situations.
The camera meters the entire frame but assigns the greatest
Center- weight to the center area. This is the classic meter for por-
weighted traits and is recommended if you are using filters with an
M
exposure factor (filter factor) over 1×.
The camera meters the current focus area; use to meter off-
center subjects (if Auto-area is selected for AF-area mode
focus area, while during face priority the camera will meter
the focus area closest to the center of the selected face;
N Spot
rectly exposed, even when framed against a background
that is much brighter or darker.
i
149
Auto Distortion Control
Reduce distortion caused by the optical characteristics of the
lens. The options available depend on the type of lens attached.
If the following options are displayed, choose a setting accord-
ing to whether the camera is being used on land or under water.
Note that underwater use requires a WP-N3 waterproof case
(available separately).
Reduce barrel distortion in pictures taken with wide-
On (above water) angle lenses and pin-cushion distortion in pictures
taken with long lenses.
Reduce pin-cushion distortion in pictures taken
underwater.
On (underwater)
Off
Auto distortion control off.
If the following options are displayed, you can choose whether
to enable auto distortion control:
Reduce barrel distortion in pictures taken with wide-
On
angle lenses and pin-cushion distortion in pictures
taken with long lenses.
Off
Auto distortion control off.
Auto distortion control is available only with 1 NIKKOR lenses
and not with NIKKOR lenses attached using the FT1 mount
party lenses. Note that when auto distortion control is enabled,
the edges of photographs may be cropped out and there may
be an increase in the time needed to process images before they
are saved.
i
150
Color Space
The color space determines the gamut of colors available for
color reproduction. Choose sRGB for general-purpose printing
and display; Adobe RGB, with its broader gamut of colors, is
more suited to shots destined for professional publication and
commercial printing.
Adobe RGB
A
For accurate color reproduction, Adobe RGB images require applica-
tions, displays, and printers that support color management.
Color Space
A
ViewNX 2 (supplied) and Capture NX 2 (available separately) automati-
cally select the correct color space when opening photographs created
with this camera. Results can not be guaranteed with third-party soft-
ware.
i
151
Active D-Lighting
Active D-Lighting preserves details in highlights and shadows
for natural contrast. Use with high contrast scenes such as a
brightly lit outdoor view framed in a door or window or a sub-
jects in the shade on a sunny day. It is most effective when used
Active D-Lighting: Off
Active D-Lighting: Y On
Active D-Lighting
D
Noise (randomly-spaced bright pixels, fog, or lines) may appear in pho-
tographs taken with Active D-Lighting. Uneven shading may be visible
with some subjects.
“Active D-Lighting” Versus “D-Lighting”
A
The Active D-Lighting option in the shooting menu adjusts exposure
before shooting to optimize the dynamic range, while the D-Lighting
after shooting.
i
152
Long Exposure NR
Photographs taken at slow shutter speeds are automatically pro-
cessed to reduce “noise” (bright spots, randomly-spaced bright
pixels, or fog), slightly increasing recording times. Selecting On
increases the amount of noise reduction performed at shutter
speeds slower than 1 s and increases the time required to record
images by roughly 1.5 to 2 times. During processing, a warning
will be displayed and pictures can not be taken (if the camera is
turned off before processing is complete, the picture will be
saved but noise reduction will not be performed). In continuous
release mode, frame rates will slow and while photographs are
being processed, the capacity of the memory buffer will drop.
Optical VR
Choose On to use optical vibration reduction with compatible
1 NIKKOR lenses.
Vibration Reduction
A
When the camera is panned, vibration reduction applies only to motion
that is not part of the pan (if the camera is panned horizontally, for
example, vibration reduction will be applied only to vertical shake),
making it much easier to pan the camera smoothly in a wide arc. The
composition may appear to change after the shutter is released, but
this does not indicate a malfunction.
i
Optical VR
A
If the lens supports both normal and active vibration reduction, select-
ing On will enable active vibration, reducing both the relatively mild
camera shake that occurs when the photographer is stationary and the
strong camera shake associated with shooting from a moving vehicle
or while walking.
153
Electronic VR
Select On to enable electronic vibration reduction in Motion
ative modes, and when HD movie is selected in advanced movie
1080/60p or 720/60p is selected for Frame size/frame rate).
This feature is available even if the attached 1 NIKKOR lens does
not support vibration reduction. Note that there will be a slight
delay before recording begins. The area recorded is shown by
guides in the display; the appearance of the guides depends on
the option selected for Electronic VR.
Electronic vibration reduction on
Electronic vibration reduction off
i
154
Focus Mode
Choose how the camera focuses.
Auto-select AF: The camera automatically selects AF-S if the subject is
stationary, AF-C if it is moving.
AF-A
Single AF: For stationary subjects. Focus locks when the shutter-
AF-S
release button is pressed halfway. *
Continuous AF: For subjects in motion. The
camera focuses continuously on the sub-
ject in the AF-area brackets while the
shutter-release button is pressed half-
way (note that the AF-area brackets
AF-C
appear only in the detailed display;
not the camera is in focus.
AF-area brackets
Full-time AF: For subjects in motion. The camera focuses continu-
ously; photos can be taken whether or not the camera is in focus.
AF-F
MF
or not the camera is in focus.
* Shutter can only be released if camera is able to focus.
i
155
Focus Mode
A
The options available vary as shown below.
Menu
Focus mode
Shooting
AF-A (default), AF-S, AF-C, MF
AF-F (default), AF-S, MF
AF-S (default), MF
0 HD movie, 1 Fast motion,
Movies 2 Jump cut, 3 4-second movie
y Slow motion
Getting Good Results with Autofocus
A
Autofocus does not perform well under the conditions listed below.
The shutter release may be disabled if the camera is unable to focus
under these conditions, or the focus area may be displayed in green
and the camera may sound a beep, allowing the shutter to be released
even when the subject is not in focus. In these cases, focus manually
same distance, and then recompose the photograph.
There is little or no contrast between
the subject and the background.
The subject contains areas of sharply
contrasting brightness.
Example: The
subject is the
same color as
the back-
Examples: The
subject is half
in the shade; a
night scene
ground.
with point illu-
mination.
The subject contains objects at differ- Background objects appear larger
ent distances from the camera. than the subject.
Example: The
i
Example: A
building is in
the frame
behind the
subject.
subject is
inside a cage.
The subject is dominated by regular
geometric patterns.
The subject contains many fine details
or is made up of objects that are small
or lack variation in brightness.
Example: Blinds
or a row of
Example: A field
of flowers.
windows in a
skyscraper.
156
See Also
A
when the camera focuses.
Manual Focus
Manual focus can be used when autofocus does not produce the
desired results.
1 Select manual focus.
Highlight Manual focus in the focus
2 Choose a magnification.
Highlight an option and press J.
Choose from 10× zoom, 5× zoom, 2×
zoom, and 1× zoom (zoom off).
3 Display the manual focus guides.
In the shooting display, press J to
magnify the view at the center of the
frame by the amount selected in
Step 2 (this feature is not available
during movie recording or in slow-
motion movie mode). Manual focus
guides are also displayed.
i
157
4 Focus.
Rotate the multi selector until the sub-
ject is in focus. Rotate the multi selec-
tor clockwise to increase the focus
distance, counterclock wise to
decrease; the faster you rotate the
multi selector, the quicker the focus
distance changes. The focus indicator
shows the approximate focus dis-
tance. Press J when the subject is in
focus.
Focus indicator
Navigation window
Press 1, 3, 4, or 2 to view areas of
the frame not currently visible in the
display; the visible portion is shown
by the navigation window.
Movies
A
The multi selector can also be used to choose the focus distance if man-
ual focus is selected prior to movie recording. Rotate the multi selector
clockwise to increase the focus distance, counterclockwise to decrease;
the faster you rotate the multi selector, the quicker the focus distance
changes.
Focal Plane Position
A
To determine the distance between your
subject and the camera, measure from the
focal plane mark on the camera body. The
distance between the lens mounting flange
and the focal plane is approximately 17 mm
(0.7 in.).
Approx.
17 mm
i
Focal plane mark
158
AF-Area Mode
Choose how the focus area for autofocus is selected.
Auto-
area
The camera automatically detects the subject and selects
the focus area.
e
Press J to view the focus area
selection display, then use the
multi selector to position the
Single- focus area over your subject
c
point
and press J; the camera
focuses on the subject in the
selected focus area only. Use
with stationary subjects.
Focus area
Focus area
Press J to view the focus area
selection display, then use the
multi selector to position the
focus area over your subject
and press J. The focus area
will track the subject as it
moves through the frame. The
camera will focus on the
selected subject when the
Subject
tracking
9
shutter-release
button
is
pressed halfway. To end focus
tracking when shooting is
complete, press J.
i
Subject Tracking
A
The camera may be unable to track subjects if they move quickly, leave
the frame or are obscured by other objects, change visibly in size, color,
or brightness, or are too small, too large, too bright, too dark, or similar
in color or brightness to the background.
159
Focus Lock
can be used to change the composition after focusing on the
subject in the center of the frame, allowing you to focus on a
subject that will not be in the center of the final composition. If
also focus on another subject at the same distance and then use
focus lock to recompose the photograph. Focus lock is most
effective when an option other than Auto-area is selected for
1 Lock focus.
Position the subject in the center of
the frame and press the shutter-
release button halfway to initiate
focus. Check that the focus area is dis-
played in green. Focus will remain
locked while the shutter-release but-
ton is pressed halfway.
2 Recompose the photograph and shoot.
Focus will remain locked between
shots.
i
Do not change the distance between the camera and the sub-
ject while focus lock is in effect. If the subject moves, lift your fin-
ger from the shutter-release button to end focus lock and then
focus again at the new distance.
160
Face-Priority
Built-in AF Assist
When On is selected, the built-in AF-
assist illuminator will light to illuminate
poorly-lit subjects if:
AF-assist illuminator
or single AF is selected in AF-A, and
• Auto-area or Single-point is selected
The AF-assist illuminator will not light to assist the focus opera-
tion in advanced movie mode, during movie recording, or when
Off is selected. If the AF-assist illuminator does not light, autofo-
cus may not produce the desired results when lighting is poor.
The AF-Assist Illuminator
A
Larger lenses may prevent the illuminator lighting all or part of the sub-
ject. Remove lens hoods when using the illuminator.
i
161
Flash Control
Choose a flash control mode for the built-in flash.
Flash output is adjusted automatically in response to shoot-
ing conditions (i-TTL flash control).
1 TTL
Choose a flash level between Full
1
and 1/32
(
/32 of full power). At full
power, the built-in flash has a guide
number of about 5/16 (m/ft, ISO
100, 20 °C/68 °F; at ISO 160, the
guide number is about 6.3/20.7).
2
Manual
A Y icon flashes in the display
during flash photography when
this option is selected.
i
162
Flash Compensation
Flash compensation alters flash output
from the level suggested by the camera,
changing the brightness of the main sub-
ject relative to the background. Choose
from values between –3 EV (darker) and
+1 EV (brighter) in increments of 1
3 EV; in
/
general, positive values make the subject brighter while nega-
tive values make it darker.
A Y icon is displayed when flash com-
pensation is in effect. Normal flash out-
put can be restored by setting flash
compensation to 0. Flash compensa-
tion is not reset when the camera is
turned off.
Underwater Flash
Choose Enable when using an optional underwater flash unit.
i
163
The Movie Menu
(
To display the movie menu, press G and select Movies.
G button
The movie menu contains the following options:
Option
Description
Default
0
Reset movie Reset movie menu options to
—
options
Advanced
movie
their default values.
Choose a movie type for
advanced movie mode.
Choose how the camera sets
exposure in advanced movie
mode.
HD movie
Exposure
mode
Scene auto selector
Choose a frame rate for slow-
Slow motion motion movies recorded in
Choose a frame size and rate
400 fps
for movies recorded in auto
Frame size/
and creative modes and when
frame rate
1080/30p
Matrix
HD movie is selected in
Choose how the camera
meters exposure.
(
Metering
Microphone:
Auto sensitivity (A)
Wind noise reduction: On
Movie sound Choose sound recording
options
options.
164
Option
Description
Default
0
Choose whether to use optical
vibration reduction with
compatible 1 NIKKOR lenses.
Choose whether to use
Optical VR
On
Electronic VR electronic vibration control
On
when recording movies.
Choose how the camera
focuses.
Focus mode
See page 156
Choose how the focus area is
selected.
Face-priority Turn face priority on or off.
AF-area mode
Auto-area 1
On2
Choose whether the camera
takes photos automatically
Auto image
Auto photography: Off
Max. shots per minute: 4
during movie recording and
capture
select the number of pictures
taken per minute.
1 The camera focuses on the subject in the center of the frame when
y Slow motion is selected in advanced movie mode.
2 Face detection is not available when y Slow motion is selected in
advanced movie mode.
(
165
Reset Movie Options
Select Yes to reset the options in the movie menu to default val-
Slow Motion
the frame rate, the smaller the frame size.
Maximum length Maximum length
Option Frame size (pixels)
Bit rate 1
(shooting)1
(playback)1, 2
12 seconds
40 seconds
120 seconds
120 fps
1280 × 720
768 × 288
416 × 144
24 Mbps
2 Mbps
1 Mbps
400 fps
3 seconds
1200 fps
1 All figures are approximate.
2 Slow-motion movies will play back over a period of about 4 (120 fps), 13
(400 fps), or 40 (1200 fps) times the recording time.
See Also
A
For information on the total length of movies that can be stored on the
memory card, see page 208.
(
166
Frame Size/Frame Rate
Choose a frame size and frame rate for movies recorded in auto
and creative modes and when HD movie is selected in advanced
Bit rate
(approx.)
Option
Frame size (pixels) Recording rate
Maximum length
t 1080/60p
r 1080/30p
u 720/60p
s 720/30p
59.94 fps 42 Mbps 10 minutes
29.97 fps 24 Mbps 20 minutes
1920 × 1080
1280 × 720
59.94 fps 16 Mbps
29 minutes
29.97 fps 12 Mbps
Photo Frame Size
A
Photographs recorded by pressing the shutter-release button all the
way down during movie recording have an aspect ratio of 3 : 2. The
frame size varies with the option selected for Frame size/frame rate:
• 1080/60p and 1080/30p: 5232 × 3488 pixels
• 720/60p and 720/30p: 1472 × 984 pixels
See Also
A
For information on the total length of movies that can be stored on the
memory card, see page 208.
(
167
Movie Sound Options
Adjust movie sound recording settings for the built-in micro-
phone.
❚❚ Microphone
Select Microphone off to disable sound recording. Selecting
any other option enables recording and sets the microphone to
the selected sensitivity.
The 2 Icon
A
Movies recorded with the microphone off are indicated by a 2 icon in
full-frame and movie playback.
❚❚ Wind Noise Reduction
Select On to enable the low-cut filter, reducing noise produced
by wind blowing over the microphone (note that other sounds
may also be affected).
Auto Image Capture
Choose whether the camera takes photos automatically while
movies are being recorded in auto or creative mode or with HD
movie selected in advanced movie mode. Photos will be taken
when a suitably-framed portrait subject is in focus and the com-
position is stable. The maximum number of photos that can be
taken during a single clip is 20, including photos taken manually
(
The camera will take photos automatically during
Auto photography
movie recording if On is selected.
Max. shots per
minute
Choose the maximum number of shots per minute
(one or four).
168
The Image Processing Menu
)
To display the image processing menu, press G and select
Image processing.
G button
The image processing menu contains the following options:
Option
Reset
processing
options
Description
Default
0
Reset image processing
options to their default values.
—
Adjust settings for different
types of lighting.
Control the camera’s sensitivity
to light.
Choose how the camera
processes pictures.
White balance
ISO sensitivity
Picture Control
Auto
Auto (160–6400)
Standard
—
CustomPicture Create custom Picture
Control Controls.
High ISO noise Reduce noise at high ISO
reduction sensitivities.
On
)
169
Reset Processing Options
Select Yes to reset the options in the image processing menu to
White Balance
White balance ensures that colors are unaffected by the color of
the light source. Auto white balance is recommended for most
light sources, but other values can be selected if necessary
according to the type of source.
Automatic white balance adjustment. Recom-
mended in most situations.
v Auto
J
I
H
N
Incandescent
Fluorescent
Use under incandescent lighting.
Use with cool-white fluorescent lighting.
Direct sunlight Use with subjects lit by direct sunlight.
Flash
Use with built-in flash.
G
M
Cloudy
Shade
Use in daylight under overcast skies.
Use in daylight with subjects in the shade.
Choose when taking pictures underwater using an
Y
Underwater
)
170
Fine-Tuning White Balance
Options other than Preset manual can be fine-tuned as follows:
1 Display fine-tuning options.
Highlight an option other than Preset
manual and press 2 to display the
fine-tuning options shown at right.
Coordinates
Adjustment
2 Fine-tune white balance.
Use the multi selector to fine-tune white balance.
Increase green
Increase blue
Increase amber
Increase magenta
White Balance Fine Tuning
A
The colors on the fine-tuning axes are relative, not absolute. For
example, moving the cursor to B (blue) when a “warm” setting such
as J (incandescent) is selected will make photographs slightly
“colder” but will not actually make them blue.
)
3 Save changes and exit.
Press J. An asterisk will appear next to the white balance
balance has been altered from default values.
171
Preset Manual
Preset manual is used to record and recall custom white balance
settings for shooting under mixed lighting or to compensate for
light sources with a strong color cast.
1 Light a reference object.
Place a neutral gray or white object under the lighting that
will be used in the final photograph. A standard gray panel
can be used for increased precision.
2 Select Preset manual.
Highlight Preset manual in the white
balance menu and press 2. The dialog
shown at right will be displayed; high-
light Yes and press J to overwrite the
existing value for preset manual white
balance.
The message shown at right will be
displayed.
)
172
3 Measure white balance.
When the camera is ready to measure
white balance, a flashing L will be
displayed. Before the indicator stops
flashing, frame the reference object so
that it fills the display and press the
shutter-release button all the way
down. No photograph will be
recorded; white balance can be mea-
sured accurately even when the cam-
era is not in focus.
4 Check the results.
If the camera was able to measure a
value for white balance, the message
shown at right will be displayed. To
return to shooting mode immediately,
press the shutter-release button half-
way.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. The message at right
will be displayed. Return to Step 3 and
measure white balance again.
)
173
Auto Power Off
D
White balance measurement will end without a new value being
acquired if no operations are performed for the time selected for Auto
Preset White Balance
D
The camera can store only one value for preset white balance at a time;
the existing value will be replaced when a new value is measured. Note
that exposure is automatically increased by 1 EV when measuring
white balance; in mode M, adjust exposure so that the exposure indica-
Color Temperature
A
The perceived color of a light source varies with the viewer and other
conditions. Color temperature is an objective measure of the color of a
light source, defined with reference to the temperature to which an
object would have to be heated to radiate light in the same wave-
lengths. While light sources with a color temperature in the neighbor-
hood of 5000–5500 K appear white, light sources with a lower color
temperature, such as incandescent light bulbs, appear slightly yellow
or red. Light sources with a higher color temperature appear tinged
with blue. The camera white balance options are adapted to the follow-
ing color temperatures (all figures are approximate):
• Sodium-vapor lamps: 2700 K
• J (incandescent)/
• H (direct sunlight): 5200 K
• N (flash): 5400 K
Warm-white fluorescent: 3000 K
• White fluorescent: 3700 K
• I (cool-white fluorescent): 4200 K
• Day white fluorescent: 5000 K
• G (cloudy): 6000 K
• Daylight fluorescent: 6500 K
• Mercury-vapor lamps: 7200 K
• M (shade): 8000 K
)
174
ISO Sensitivity
The camera’s sensitivity to light can be adjusted according to the
amount of light available. The higher the ISO sensitivity, the less
light needed to make an exposure, allowing faster shutter
speeds or smaller apertures.
The camera adjusts ISO sensitivity in response to
lighting conditions. ISO sensitivity is adjusted in
q Auto (160–6400)
the range given in brackets; choose larger ranges
x Auto (160–3200)
for increased sensitivity when lighting is poor,
w Auto (160–800)
smaller ranges to reduce noise (randomly-spaced
bright pixels, fog, or lines).
ISO sensitivity is fixed at the selected value. If 6400
160, 200, 400, 800,
1600, 3200, 6400,
6400 (NR), 12800,
12800 (NR)
(NR) or 12800 (NR) is selected, the camera will take
four shots each time the shutter-release button is
pressed all the way down and combine them to
create a single image processed to reduce the
noise that occurs at high sensitivities.
“Auto” ISO Sensitivity Options
A
When auto ISO sensitivity control is in effect,
the display shows an ISO AUTO icon and the
current ISO sensitivity.
6400 (NR)/12800 (NR)
D
The edges of the image will be cropped out and the built-in flash and
Active D-Lighting can not be used. The desired results may not be
achieved if the camera or subject moves during shooting. If NEF (RAW)
or NEF (RAW) + JPEG fine is selected for image quality, the picture will
be recorded as a fine-quality JPEG image. Only one shot will be taken if
)
the shutter speed is slower than 1
/30 s.
175
Picture Control
Choose how the camera processes photographs.
Standard processing for balanced results. Recom-
mended in most situations.
Q Standard
Minimal processing for natural results. Choose for
photographs that will later be extensively processed
or retouched.
R Neutral
Pictures are enhanced for a vivid, photoprint effect.
Choose for photographs that emphasize primary col-
ors.
S Vivid
T Monochrome Take monochrome photographs.
Process portraits for natural texture and a rounded
feel.
e Portrait
Take vibrant photographs of landscapes and city-
scapes.
f Landscape
Modifying Picture Controls
modified to suit the scene or your creative intent.
1 Display options.
Highlight an item in the Picture Con-
trol menu and press 2 to display Pic-
settings available with custom Picture
Controls are the same as the preset
controls on which they are based). To
use an unmodified Picture Control, highlight it and press J.
)
176
2 Adjust settings.
Press 1 or 3 to highlight the desired
setting and press 4 or 2 to choose a
value. Repeat this step until all set-
tings have been adjusted, or select
Quick adjust to choose a preset com-
bination of settings. Default settings can be restored by
pressing the O button.
3 Save changes and exit.
Press J.
Preset Picture Controls Versus Custom Picture Controls
A
The Picture Controls supplied with the camera are referred to as preset
Picture Controls. Custom Picture Controls are created through modifica-
tions to existing Picture Controls using the Custom Picture Control
ture Controls can be saved to a memory card and copied to other
Modified Picture Controls
A
Picture Controls that have been modified
from default settings are indicated by an
asterisk (“*”) in the Picture Control menu
)
177
❚❚ Picture Control Settings
Mute or exaggerate the effect of the
selected Picture Control (note that this
resets all manual adjustments). Not avail-
able with Neutral, Monochrome, or custom
Picture Controls.
Quick adjust
Manually adjust the sharpness of outlines,
Sharpening or select A to adjust sharpness automati-
Manual
adjustments
(all Picture
Controls)
cally.
Adjust contrast manually, or select A for
Contrast
automatic contrast adjustment.
Adjust brightness without affecting expo-
sure.
Brightness
Manual
adjustments
(non-monochrome
only)
Control the vividness of colors. Select A to
Saturation
adjust saturation automatically.
Hue
Adjust hue.
Filter
effects
Simulate the effect of color filters on mono-
chrome photographs.
Manual
adjustments
(monochrome only)
Choose the tint used in monochrome pho-
tographs.
Toning
“A” (Auto)
D
Results for auto sharpening, contrast, and saturation vary with expo-
sure and the size and position of the subject in the frame.
)
178
Previous Settings
A
The line under the value displayed in the Pic-
ture Control setting menu indicates the pre-
vious value for the setting. Use this as a
reference when adjusting settings.
Filter Effects (Monochrome Only)
A
The options in this menu simulate the effect of color filters on mono-
chrome photographs. The following filter effects are available:
Y (yellow)
O (orange) the sky in landscape photographs. Orange produces more
contrast than yellow, red more contrast than orange.
Enhance contrast. Can be used to reduce the brightness of
R (red)
G (green) Softens skin tones. Can be used for portraits.
Note that the effects achieved with Filter effects are more pronounced
than those produced by physical glass filters.
Toning (Monochrome Only)
A
Choose from B&W (black-and-white), Sepia,
Cyanotype (blue-tinted monochrome), Red,
Yellow, Green, Blue Green, Blue, Purple
Blue, Red Purple. Pressing 3 when Toning
is highlighted displays saturation options.
Press 4 or 2 to adjust saturation. Saturation
control is not available when B&W (black-
and-white) is selected.
)
179
Custom Picture Control
The Picture Controls supplied with the camera can be modified
and saved as custom Picture Controls.
Edit/Save
To create a custom Picture Control, select Edit/save and follow
the steps below.
1 Select a Picture Control.
Highlight an existing Picture Control
and press 2, or press J to proceed to
Step 3 to save a copy of the high-
lighted Picture Control without fur-
ther modification.
2 Edit the selected Picture Control.
abandon any changes and start over
from default settings, press the O but-
ton. Press J when settings are com-
plete.
)
180
3 Save the Picture Control.
Highlight a destination (C-1 through
C-9) and press J to save the custom
Picture Control and return to the
image processing menu.
The new Picture Control will be listed
in the Picture Control menu.
Load from/Save to Card
Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as
Capture NX 2 can be copied to a memory card and loaded into
the camera, or custom Picture Controls created with the camera
can be copied to the memory card to be used in other Nikon 1 J4
cameras and compatible software and then deleted when no
longer needed.
)
181
To copy custom Picture Controls to or from the memory card, or
to delete custom Picture Controls from the memory card, select
Load from/save to card in the Custom Picture Control menu.
The following options will be displayed:
Copy custom Picture Controls from the memory card to
Copy to camera
custom Picture Controls C-1 through C-9.
Delete selected custom Picture
Controls from the memory
card. The confirmation dialog
shown at right will be dis-
played before a Picture Control
Delete from card
is deleted; to delete the
selected Picture Control, high-
light Yes and press J.
Copy a custom Picture Control (C-1 through C-9) to a
Copy to card
selected destination (1 through 99) on the memory card.
Copy to Card
A
Up to 99 custom Picture Controls can be stored on the memory card at
any one time. The memory card can only be used to store user-created
custom Picture Controls. The preset Picture Controls supplied with the
camera can not be copied to the memory card or deleted.
Custom Picture Control > Delete
A
The Delete option in the Custom Picture Control menu can be used to
delete selected custom Picture Controls from the camera when they
are no longer needed.
High ISO Noise Reduction
)
Select On to reduce “noise” (randomly-spaced bright pixels,
lines, or fog). If Off is selected, noise reduction will still be per-
formed, but the amount is less than that performed when On is
selected.
182
The Setup Menu
g
To display the setup menu, press G and select Setup.
G button
The setup menu contains the following options:
Option
Description
Reset setup menu options to
default values.
Default
—
0
Reset setup options
Format memory card Format the memory card.
Allow the shutter to be
—
Slot empty release released when no memory
Release locked
lock
card is inserted in the cam-
era.
Adjust display brightness, Display brightness: 0
view or hide a framing grid,
and choose the information
displayed in the monitor.
Mute the sounds made dur-
ing shooting.
Grid display: Off
Shooting: Simple
Playback: Basic info
Display
Silent photography
Sound settings
Auto power off
Off
AF: On
Self-timer: On
Touch-screen controls:
On
Choose the beeps made by
the camera.
Choose the auto power off
delay.
Enable or disable touch-
screen controls.
1 min
Touch-screen
controls
Enable
g
183
Option
Description
Default
0
Choose whether exposure
Shutter button AE locks when the shutter-
Off
lock
release button is pressed
halfway.
Choose whether remote
controls for HDMI-CEC
devices to which the cam-
era is connected can be
used to operate the cam-
era.
HDMI device control
Flicker reduction
On
Reduce flicker or banding.
—
—
Reset file numbering Reset file numbering.
Time zone and date Set the camera clock.
Choose a language for the
camera displays.
Record camera orientation
with pictures.
Language
—
On
Auto image rotation
Check and optimize the
Pixel mapping
camera image sensor and
image processors.
Display the current firm-
ware version.
—
—
Firmware version
g
184
Reset Setup Options
Select Yes to reset all setup menu options other than Flicker
reduction, Time zone and date, and Language to default val-
ues.
Format Memory Card
Select Yes to format the memory card. Note that this permanently
deletes all data on the card, including protected images; before
proceeding, be sure to copy important pictures and other data
card, highlight No and press J.
The message shown at right is displayed
while the card is formatted; do not remove
the memory card or remove or disconnect
the power source until formatting is com-
plete.
Slot Empty Release Lock
If Enable release is selected, the shutter can be released when
no memory card is inserted. No pictures will be recorded,
although they will be displayed in demo mode. Select Release
locked to enable the shutter only when a card is inserted.
Display
Adjust the following display options.
Display Brightness
g
Press 1 or 3 to choose a value for moni-
tor brightness. Choose higher values to
brighten the display and lower values to
make the display darker.
185
Sound Settings
Highlight items and press 2 to select or
deselect. Select AF to sound a beep when
the camera focuses, Self-timer to sound
a beep during self-timer photography,
Touch-screen controls to sound a beep
in response to use of the touch-screen
controls, or remove the checks to mute these sounds. Press J to
exit when settings are complete.
Auto Power Off
Choose how long the display remains on
when no operations are performed
the drain on the battery. Once the display
has turned off, it can be reactivated by
pressing the shutter-release button.
Touch-Screen Controls
Enable or disable touch-screen controls.
Shutter Button AE Lock
If On is selected, exposure will lock while the shutter-release but-
ton is pressed halfway.
g
187
Flicker Reduction
Reduce flicker and banding in the display and in movies while
shooting under fluorescent or mercury-vapor lighting. Choose a
frequency which matches that of the local AC power supply.
Flicker Reduction
A
If you are unsure as to the frequency of the local power supply, test
both options and choose the one that produces the best results. Flicker
reduction may not produce the desired results if the subject is very
bright, in which case you should select mode A or M and choose a
smaller aperture (higher f-number).
Reset File Numbering
When a photograph is taken or a movie is recorded, the camera
names the file by adding one to the number of the previous file
either 999 photographs or a photograph numbered 9999, the
shutter-release button will be disabled and no further photo-
graphs can be taken. To reset file numbering to 0001, select Yes
for Reset file numbering and then either format the current
memory card or insert a new memory card.
g
188
Time Zone and Date
Change time zones, set the camera clock,
choose the date display order, or turn
Choose a time zone. The camera clock is automatically set
to the time in the new time zone.
Date and time Set the camera clock.
Time zone
Choose the order in which the day, month, and year are
displayed.
Date format
Turn daylight saving time on or off. The camera clock will
automatically be advanced or set back one hour. The
default setting is Off.
Daylight
saving time
Language
Choose a language for camera messages and displays.
g
189
Auto Image Rotation
Photographs taken while On is selected contain information on
camera orientation, allowing them to be rotated automatically
during playback or when viewed in ViewNX 2 (supplied) or
tations are recorded:
Landscape (wide)
orientation
Camera rotated 90°
clockwise
Camera rotated 90°
counterclockwise
Camera orientation is not recorded when Off is selected. Choose
this option when panning or taking photographs with the lens
pointing up or down.
Auto Image Rotation
D
Image orientation is not recorded for movies, Motion Snapshots, or
panoramas.
Rotate Tall
A
To automatically rotate “tall” (portrait-orientation) photographs for dis-
play during playback, select On for the Rotate tall option in the play-
g
190
Pixel Mapping
Check and optimize the camera image sensor and image proces-
sors if you notice unexpected bright spots in your pictures (note
that the camera comes with the sensor and processors already
optimized). Before performing pixel mapping as described
below, check that the battery is fully charged.
1 Attach a lens and lens cap.
Turn the camera off and attach a 1 NIKKOR lens. If the lens is
equipped with a cap, do not remove it.
2 Select Pixel mapping.
Turn the camera on, press G, and select Pixel mapping in
the setup menu.
3 Select Yes.
Pixel mapping begins immediately. Note that other opera-
tions can not be performed while pixel mapping is in
progress. Do not turn the camera off or remove or disconnect
the power source until pixel mapping is complete.
4 Turn the camera off.
Turn the camera off when pixel mapping is complete.
Firmware Version
View the current firmware version.
g
191
Technical Notes
n
Read this chapter for information on compatible accessories,
cleaning and storing the camera, and what to do if an error mes-
sage is displayed or you encounter problems using the camera.
Optional Accessories
At the time of writing, the following accessories were available
for your camera.
Lenses
1 mount lenses
Mount
adapters
Mount Adapter FT1: The FT1 allows NIKKOR F mount lenses to
be used with Nikon 1 interchangeable lens format digital
cameras. The angle of view of an F mount lens mounted on
the FT1 is equivalent to that of a 35 mm format lens with a
tion on using the FT1; be sure to update to the latest version
of the FT1 firmware before use. For information on attaching
and removing the FT1 and on precautions for use, see the
FT1 Mount Adapter User’s Manual. For information on the
lenses that can be used, see Compatible NIKKOR F Mount
Lenses. The FT1 Mount Adapter User’s Manual and Compatible
NIKKOR F Mount Lenses are included with the FT1.
Power
sources
EN-EL22 batteries are available from local retailers and
Nikon-authorized service representatives.
• Power Connector EP-5E, AC Adapter EH-5b: These accessories can
be used to power the camera for extended periods (EH-5a
and EH-5 AC adapters can also be used). An EP-5E power
connector is required to connect the camera to the EH-5b,
Waterproof Waterproof Case WP-N3: In addition to protecting the camera
cases
from rain, snow, and spray, this waterproof case can be used
to take photographs underwater.
n
192
Underwater Underwater Speedlight SB-N10: Use with the optional WP-N3
flash units waterproof case.
Software
Capture NX 2: A complete photo editing package offering such
features as white balance adjustment and color control
points.
Note: Use the latest versions of Nikon software; see the web-
ported operating systems. At default settings, Nikon Message
Center 2 will periodically check for updates to Capture NX 2
and other Nikon software and firmware while you are logged
in to an account on the computer and the computer is con-
nected to the Internet. A message is automatically displayed
when an update is found.
Body caps Body Cap BF-N1000: The body cap keeps the dust shield free of
dust when a lens is not in place.
Optional Accessories
A
Availability may vary with country or region. See our website or bro-
chures for the latest information.
n
193
Approved Memory Cards
The following cards have been tested and approved for use in
the camera. Cards with class 6 or faster write speeds are recom-
mended for movie recording. Recording may end unexpectedly
when cards with slower write speeds are used.
microSD cards
microSDHC cards 2
microSDXC cards 3
SanDisk
Toshiba
Panasonic
64 GB
2 GB 1
4 GB, 8 GB, 16 GB, 32 GB
—
1 Check that any card readers or other devices with which the card will be
used support 2 GB cards.
2 Check that any card readers or other devices with which the card will be
used are SDHC-compliant. The camera supports UHS-I.
3 Check that any card readers or other devices with
which the card will be used are SDXC-compliant. The
camera supports UHS-I.
Other cards have not been tested. For more details on the above
cards, please contact the manufacturer.
n
194
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connec-
tor and AC adapter.
1 Ready the camera.
Open the battery-chamber/mem-
ory card slot and power connector
covers.
2 Insert the EP-5E power connector.
Be sure to insert the connector in the
orientation shown, using the connec-
tor to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the con-
nector is fully inserted.
3 Close the battery-chamber/memory card slot cover.
Position the power connector cable so
that it passes through the power con-
nector slot and close the battery-
chamber/memory card slot cover.
n
195
4 Connect the AC adapter.
Connect the AC adapter power cable to the AC socket on AC
adapter (q) and the EP-5E power cable to the DC socket (w).
A P icon is displayed in the monitor when the camera is
powered by the AC adapter and power connector.
n
196
Storage and Cleaning
Storage
If the camera will not be used for an extended period, remove
the battery and store it in a cool, dry area with the terminal cover
in place. To prevent mold or mildew, store the camera in a dry,
well-ventilated area. Do not store your camera with naphtha or
camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
• are exposed to temperatures above +50 °C (122 °F) or below –10 °C
(14 °F)
Cleaning
Use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using the camera at the beach or sea-
side, wipe off sand or salt with a cloth lightly dampened in
distilled water and dry thoroughly. Important: Dust or other
Camera body
foreign matter inside the camera may cause damage not cov-
ered under warranty.
Lenses are easily damaged. Remove dust and lint with a
blower. If using an aerosol blower, keep the can vertical to
Lens
prevent the discharge of liquid. To remove fingerprints and
other stains, apply a small amount of lens cleaner to a soft
cloth and clean with care.
Remove dust and lint with a blower. When removing finger-
prints and other stains, wipe the surface lightly with a soft
cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.
Monitor
The dust shield is easily damaged. Remove dust and lint
with a blower.
Dust shield
Do not use alcohol, thinner, or other volatile chemicals.
n
197
Caring for the Camera and Battery: Cautions
Do not drop: The product may malfunction if subjected to strong shocks or
vibration.
Keep dry: This product is not waterproof, and may malfunction if
immersed in water or exposed to high levels of humidity. Rusting of the
internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature: Sudden changes in temperature, such
as those that occur when entering or leaving a heated building on a cold
day, can cause condensation inside the device. To prevent condensation,
place the device in a carrying case or plastic bag before exposing it to
sudden changes in temperature.
Keep away from strong magnetic fields: Do not use or store this device in the
vicinity of equipment that generates strong electromagnetic radiation
or magnetic fields. Strong static charges or the magnetic fields produced
by equipment such as radio transmitters could interfere with the display,
damage data stored on the memory card, or affect the product’s internal
circuitry.
Keep the lens mount covered: Be sure to attach the body cap if the camera is
without a lens.
Do not touch the dust shield: The dust shield covering the image sensor is
easily damaged. Under no circumstances should you exert pressure on
the shield or poke it with cleaning tools. These actions could scratch or
otherwise damage the shield.
Turn the product off before removing or disconnecting the power source: Do not
unplug the product or remove the battery while the product is on or
while images are being recorded or deleted. Forcibly cutting power in
these circumstances could result in loss of data or in damage to product
memory or internal circuitry. To prevent an accidental interruption of
power, avoid carrying the product from one location to another while
the AC adapter is connected.
n
198
Cleaning: When cleaning the camera body, use a blower to gently remove
dust and lint, then wipe gently with a soft, dry cloth. After using the cam-
era at the beach or seaside, wipe off any sand or salt using a cloth lightly
dampened in pure water and then dry the camera thoroughly.
Lenses are easily damaged. Dust and lint should be gently removed with
a blower. When using an aerosol blower, keep the can vertical to prevent
discharge of liquid. To remove fingerprints and other stains from the
lens, apply a small amount of lens cleaner to a clean, soft cloth and wipe
the lens carefully.
Storage: To prevent mold or mildew, store the camera in a cool, dry, well-
ventilated area. If you are using an AC adapter, unplug the adapter to
prevent fire. If the product will not be used for an extended period,
remove the battery to prevent leakage and store the camera in a plastic
bag containing a desiccant. Do not, however, store the camera case in a
plastic bag, as this may cause the material to deteriorate. Note that des-
iccant gradually loses its capacity to absorb moisture and should be
replaced at regular intervals.
To prevent mold or mildew, take the camera out of storage at least once
a month. Turn the camera on and release the shutter a few times before
putting it away.
Store the battery in a cool, dry place. Replace the terminal cover before
putting the battery away.
Notes on the monitor: The monitor is constructed with extremely high pre-
cision; at least 99.99% of pixels are effective, with no more than 0.01%
being missing or defective. Hence while these displays may contain pix-
els that are always lit (white, red, blue, or green) or always off (black), this
is not a malfunction and has no effect on images recorded with the
device.
Images in the monitor may be difficult to see in a bright light.
Do not apply pressure to the display, as this could cause damage or mal-
function. Dust or lint on the display can be removed with a blower. Stains
can be removed by wiping lightly with a soft cloth or chamois leather.
Should the monitor break, care should be taken to avoid injury from bro-
ken glass and to prevent liquid crystal from the display touching the skin
or entering the eyes and mouth.
n
199
Do not leave the lens pointed at the sun: Do not leave the lens pointed at the
sun or other strong light source for an extended period. Intense light
may cause the image sensor to deteriorate or produce a white blur effect
in photographs.
Moiré: Moiré is an interference pattern created by the interaction of an
image containing a regular, repeating grid, such as the pattern of weave
in cloth or windows in a building, with the camera image sensor grid. In
some cases, it may appear in the form of lines. If you notice moiré in your
photographs, try changing the distance to the subject, zooming in and
out, or changing the angle between the subject and the camera.
Lines: Noise in the form of lines may in rare cases appear in pictures of
extremely bright or backlit subjects.
Batteries: Batteries may leak or explode if improperly handled. Observe
the following precautions when handling batteries:
• Use only batteries approved for use in this equipment.
• Do not expose the battery to flame or excessive heat.
• Keep the battery terminals clean.
• Turn the product off before replacing the battery.
• Remove the battery from the camera or charger when not in use and
replace the terminal cover. These devices draw minute amounts of
charge even when off and could draw the battery down to the point
that it will no longer function. If the battery will not be used for some
time, insert it in the camera and run it flat before removing it and stor-
ing it in a location with an ambient temperature of 15 °C to 25 °C (59 °F
to 77 °F; avoid hot or extremely cold locations). Repeat this process at
least once every six months.
• Turning the camera on and off repeatedly when the battery is fully dis-
charged will shorten battery life. Batteries that have been fully dis-
charged must be charged before use.
• The internal temperature of the battery may rise while the battery is in
use. Attempting to charge the battery while the internal temperature is
elevated will impair battery performance, and the battery may not
charge or charge only partially. Wait for the battery to cool before
charging.
n
• Continuing to charge the battery after it is fully charged can impair bat-
tery performance.
200
• A marked drop in the time a fully charged battery retains its charge
when used at room temperature indicates that it requires replacement.
Purchase a new EN-EL22 battery.
• Charge the battery before use. When taking photographs on important
occasions, ready a spare EN-EL22 battery and keep it fully charged.
Depending on your location, it may be difficult to purchase replace-
ment batteries on short notice. Note that on cold days, the capacity of
batteries tends to decrease. Be sure the battery is fully charged before
taking photographs outside in cold weather. Keep a spare battery in a
warm place and exchange the two as necessary. Once warmed, a cold
battery may recover some of its charge.
• Used batteries are a valuable resource; recycle in accord with local reg-
ulations.
Servicing the Camera and Accessories
D
The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particu-
larly recommended if the camera is used professionally. Any accesso-
ries regularly used with the camera, such as lenses, should be included
when the camera is inspected or serviced.
n
201
Available Settings
The following table lists the settings that can be adjusted in each
mode.
❚❚ C Auto, u Best Moment Capture, v Advanced Movie, and z Motion
Snapshot Modes
u
v
z
P, S , A
—
—
✔
C
s
✔
✔
t y h P, S , A
✔
✔
M
—
—
h
—
—
—
M
1
Image quality
Image size 2
Metering
✔
✔
✔
✔
—
—
—
—
—
—
—
—
✔
1
3
3
4
4
—
✔
✔
✔
✔
Auto distortion
control
Color space
Active D-Lighting
Long exposure NR
Focus mode
AF-area mode
Face-priority
Flash compensation
Underwater flash
White balance
ISO sensitivity
Picture Control
Custom Picture
Control
1
✔
✔
✔
✔
✔
—
—
—
—
—
—
1
✔
✔
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
—
—
—
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
✔
—
—
✔
✔
✔
—
—
—
—
✔
✔
—
—
✔
✔
✔
3
3
—
✔
✔
5
✔
—
—
3
3
—
—
—
—
✔
✔
✔
✔
✔
✔
3
3
3
3
4
4
✔
✔
✔
✔
4
4
—
—
—
—
—
—
✔
✔
✔
—
—
✔
✔
✔
5
✔
3
3
—
—
—
✔
✔
✔
✔
✔
✔
3
3
3
3
3
3
—
✔
✔
—
—
✔
✔
✔
✔
—
✔
✔
✔
✔
High ISO noise
reduction
✔
✔
✔
✔
✔
✔
n
202
u
v
z
P, S , A
—
C
✔
✔
s
—
—
t y h P, S , A
—
—
M
—
✔
h
—
—
M
—
—
Continuous 6
Self-timer6
Exposure
compensation
Flash mode
—
—
—
✔
—
✔
—
7
7
✔
✔
✔
—
—
✔
✔
—
—
✔
✔
—
—
5
✔
—
—
—
—
—
—
1 Has no effect on movies recorded with movie-record button.
2 RAW images fixed at 5232 × 3488 pixels.
3 Available when P, S, A, or M is selected for Exposure mode.
4 Not available when y Slow motion is selected in advanced movie mode
5 Not available when 10, 20, 30, or 60 fps is selected in continuous mode
6 Continuous and self-timer can not be used together.
7 Available when h, P, S, or A is selected for Exposure mode.
n
203
❚❚ wCreative Mode
In the table below, creative modes are represented by the
following icons: 4 creative palette, 5 HDR, p easy panorama,
q soft, r miniature effect, s selective color, 6 cross process,
and 7 toy camera effect.
P, S , A
✔
M
✔
4
5
p
q, r, s, 6, 7
1
1
1,2
1,2
1,2
1,2
Image quality
Image size
Metering
Auto distortion control
Color space
Active D-Lighting
Long exposure NR
Focus mode
AF-area mode
Face-priority
✔
✔
✔
✔
✔
1,3
1,3
1
1
1
1
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
✔
—
1
1
1
1
4
1
1
1
1
1
✔
✔
✔
✔
✔
✔
1
1
1
1
✔
✔
✔
✔
✔
1
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
—
—
—
—
—
4
1
1
✔
✔
✔
4,5
4,5
5
Flash compensation
Underwater flash
White balance
✔
✔
✔
✔
✔
✔
4,5
4,5
5
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
—
—
✔
1
1
ISO sensitivity
✔
Picture Control
Custom Picture Control
High ISO noise reduction
Continuous 6
Self-timer 6
Exposure compensation
Flash mode
✔
✔
✔
✔
✔
✔
—
—
✔
—
✔
✔
4
4
✔
✔
—
1 Has no effect on movies recorded with movie-record button.
2 NEF (RAW) and NEF (RAW) + JPEG fine not available.
3 RAW images fixed at 5232 × 3488 pixels.
4 Not available when 10, 20, 30, or 60 fps is selected in continuous mode
5 Not available at an ISO sensitivity of 6400 (NR) or 12800 (NR).
6 Continuous and self-timer can not be used together.
n
204
Defaults
Defaults for the options in the playback, shooting, movie, image
listed below.
Option
Default
Center *
Off
Off
8 (single frame)
0.0
Auto, Soft, Miniature effect,
Selective color, Cross process,
Toy camera effect: Auto
P Programmed auto, S Shutter-priority
auto, A Aperture-priority auto, M Manual:
Fill flash
Unmodified
* Not displayed when Auto-area is selected for AF-area mode.
n
205
Memory Card Capacity
The following table shows the number of pictures or amount of
movie footage that can be stored on a 16GB SanDisk SDSDQXP-
016G-J35 UHS-I microSDHC card at different image quality, size,
or movie settings. All figures are approximate; file size varies
with the type of card and scene recorded.
❚❚ Auto, Creative (Easy Panorama Excluded), Active Selection, Slow View, and
Smart Photo Selector 1
5232 × 3488
3920 × 2616
2608 × 1744
—
5232 × 3488
3920 × 2616
2608 × 1744
5232 × 3488
3920 × 2616
2608 × 1744
File size
35.3 MB
30.7 MB
27.5 MB
24.3 MB
11.0 MB
6.5 MB
3.2 MB
5.8 MB
3.5 MB
1.9 MB
No. of images
430
NEF (RAW) +
JPEG fine 2
494
552
625
1300
2300
4700
2600
4300
7900
NEF (RAW)
JPEG fine
JPEG normal
1 Number of shots saved set to 1.
2 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.
n
206
❚❚ Easy Panorama
Image quality
Image size
File size
No. of images
Normal
panorama 1536 × 4800
Wide 9600 × 920
panorama 1536 × 9600
Normal 4800 × 920
panorama 1536 × 4800
Wide 9600 × 920
panorama 1536 × 9600
4800 × 920
4.4 MB
4.4 MB
8.6 MB
8.6 MB
2.3 MB
2.3 MB
4.4 MB
4.4 MB
3400
3400
1700
1700
6500
6500
3400
3400
JPEG fine
JPEG normal
❚❚ Smart Photo Selector 1
5232 × 3488
3920 × 2616
2608 × 1744
—
5232 × 3488
3920 × 2616
2608 × 1744
5232 × 3488
3920 × 2616
2608 × 1744
File size
176.5 MB
153.6 MB
137.3 MB
121.4 MB
55.1 MB
32.3 MB
15.9 MB
29.0 MB
17.6 MB
9.4 MB
No. of shots
86
98
110
125
275
469
952
NEF (RAW) +
JPEG fine 2
NEF (RAW)
JPEG fine
522
860
1500
JPEG normal
1 Number of shots saved set to 5. File size is total for 5 images.
2 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.
n
207
❚❚ HD, Fast-Motion, Jump-Cut, and 4-Second Movies
1080/60p
Maximum total length (approx.)2
47 minutes
1080/30p
720/60p
720/30p
1 hour 20 minutes
1 hour 57 minutes
2 hours 32 minutes
1 HD movies only. Fast-motion, jump-cut, and 4-second movies are
recorded at 1080/30p.
2 For information on the maximum length that can be recorded in a single
clip, see page 167.
❚❚ Slow-Motion Movies
120 fps
Maximum total recorded length (approx.) *
26 minutes
400 fps
31 minutes
1200 fps
31 minutes
* Up to 3 s of slow-motion footage can be recorded in a single clip. Playback
length is about 4 (120 fps) or 13 (400 fps) or 40 (1200 fps) times the
recorded length.
❚❚ Motion Snapshots
Image quality
File size
23.6 MB *
32.5 MB
No. of shots
641
467
—
—
—
—
NMS
MOV
* File size is the total for a single photograph and movie.
n
208
Troubleshooting
If the camera fails to function as expected, check this list of com-
mon problems before consulting your retailer or Nikon repre-
sentative.
Battery/Display
The camera is on but does not respond: Wait for recording or any other process-
ing to end. If the problem persists, turn the camera off. If the camera still
does not respond, remove and replace the battery or disconnect and
reconnect the AC adapter, but note that this will delete any data not yet
saved. Data already saved to the memory card are unaffected.
The display is off:
display can be reactivated by pressing the shutter-release button.
The camera turns off without warning:
display can be reactivated by pressing the shutter-release button.
camera to cool before turning it on again.
Indicators are not displayed: Use the Display > Shooting and Display >
Playback options in the setup menu to choose the information dis-
Shooting (All Modes)
The camera takes time to turn on: Delete files or format the memory card.
The shutter-release is disabled:
n
209
Only one picture is taken each time the shutter-release button is pressed in continuous
flash is raised.
The camera does not focus automatically:
Focus does not lock when the shutter-release button is pressed halfway: Set the
Focus area selection is unavailable: Focus area selection is not available in
focus area can be selected by pressing J.
AF-area mode selection is unavailable: The camera is in auto or best moment
Image size selection is unavailable: NEF (RAW) is selected for image quality
The camera is slow to record photos: Turn long exposure noise reduction off
6400 (NR) and 12800 (NR). In creative mode, additional time may be
needed to record photos when HDR or Easy panorama is selected
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos:
• Use long exposure noise reduction at shutter speeds slower than 1 s
Smudges appear in photographs: Clean the front and rear lens elements or the
Flicker or banding appears in movies or in the display: Choose a Flicker reduc-
and M modes, the flash will not fire when lowered.
Menu items are unavailable: Some options are only available in particular
n
210
Shooting (P, S, A, and M Modes)
The shutter release is disabled: You selected mode S after choosing a shutter
Some shutter speeds are not available: You are using the flash.
Colors are unnatural:
Picture Controls produce varying results: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
Noise (reddish areas and other artifacts) appears in long time-exposures: Enable
Movies
Cannot record movies: The movie-record button can not be used to record
No sound is recorded for movies:
• Microphone off is selected for Movie sound options > Microphone
• Live audio is not recorded with slow-motion, fast-motion, or jump-cut
Tap Shooting Options
The touch screen can not be used for shooting or focus:
• Touch shooting options are not available in best moment capture or
Motion Snapshot mode.
• The edges of the display can not be used for shooting or focus. Tap
closer to the center of the display.
Pictures are blurred: The camera may move when the display is tapped,
which may under some conditions result in blurred pictures. Use both
hands to hold the camera steady.
n
211
Playback
NEF (RAW) images are not displayed: The camera displays only the JPEG copies
“Tall” (portrait) orientation photos are displayed in “wide” (landscape) orientation:
Cannot hear movie sound:
to adjust the volume.
• Live audio is not recorded with slow-motion, fast-motion, or jump-cut
Cannot delete images: Remove protection from the files before deletion
tos are in NEF (RAW) format. To print NEF (RAW) photos, transfer the pic-
tures to a computer and use the supplied software or Capture NX 2
Pictures are not displayed on TV: The camera is not correctly connected
Pictures cannot be transferred to a computer: If your system does not meet the
the computer using a card reader.
Wi-Fi (Wireless Networks)
Smart devices do not display the camera SSID (network name):
• Try turning the smart device Wi-Fi off and then on again.
Miscellaneous
Menu items are unavailable: Some options are only available at particular
n
212
Error Messages
This section lists the error messages that appear in the display.
Message
Solution
0
If the subject is too bright, lower ISO
f-number).
(Shutter-speed or
aperture display
flashes)
If the subject is too dark, raise ISO sen-
sitivity, use the flash, or choose
a
slower shutter speed or larger aperture
(lower f-number).
A lens with a retractable lens barrel
button is attached with the lens barrel
barrel button pressed, rotate the zoom
ring to extend the lens.
Keeping the zoom ring
button pressed, rotate
the zoom ring to
extend the lens.
Check lens. Pictures
can only be taken
when a lens is
attached.
Attach a lens.
Cannot take pictures. Turn the camera off and recharge the
Insert fully-charged
battery.
battery.
Start-up error. Turn the Turn the camera off, remove and
on again.
camera on.
The clock has been
reset.
Set the camera clock.
Turn the camera off and confirm that
the card is correctly inserted.
No memory card.
n
213
Message
Solution
0
• Use an approved card.
This memory card
cannot be used. Card
may be damaged;
sists, the card may be damaged. Con-
tact a Nikon-authorized service
insert a different card. representative.
• Insert a new memory card.
This memory card is Select Yes to format the card, or turn
the memory card?
memory card.
images if you reduce image quality or
size.
Memory card is full.
• Delete unwanted images.
• Insert another memory card.
If the current folder is numbered 999 and
contains either 999 photographs or a
photograph numbered 9999, the shut-
ter-release button will be disabled and
no further photographs can be taken.
Choose Yes for Reset file numbering
and then either format the current mem-
ory card or insert a new memory card.
The movie-record button can not be
Cannot create
additional folders on
memory card.
The movie-record
in this mode. Motion Snapshot modes.
Photographs cannot The shutter-release button can not be
be recorded in this
mode.
used to take photographs while
slow-motion movie is being recorded.
a
Photographs cannot be
taken in shutter- priority Choose a different shutter speed, or
auto mode at a shutter select mode M.
speed of “Bulb”.
n
214
Message
Solution
0
Use a lens with a focal length of 6 to
30 mm to shoot panoramas. If you are
Cannot shoot
panorama with lens of
this focal length.
using
a
zoom lens, choose
a
focal
length between 6 and 30 mm.
Turn the camera off and then on again
and reattempt the update. If the prob-
lem persists or reoccurs frequently,
Failed to update lens
firmware. Try again
after turning the
—
contact
a
Nikon-authorized service
camera off and on.
representative.
An error has occurred Turn the camera off and then on again.
in the internal circuitry. If the problem persists or reoccurs fre-
Try again after turning quently, contact a Nikon-authorized
the camera off and on. service representative.
—
The camera’s internal
temperature is high.
The camera will now
Wait for the camera to cool.
turn off.
Memory card contains To view pictures, insert a memory card
—
no images.
containing images.
The file has been created or modified
Cannot display this file. on a computer or different make of
camera, or is corrupt.
*
Check printer.
Check the printer.
—
Select Resume after loading paper of
the correct size.
Clear the jam and select Resume.
Insert paper and select Resume.
Select Resume after checking the ink.
Replace the ink and select Resume.
*
Check paper.
—
*
Paper jam.
—
—
—
—
*
Out of paper.
Check ink supply.
Out of ink.
*
*
* See the printer manual for more information.
n
215
Specifications
Nikon 1 J4 Digital Camera
Type
Type
Digital camera with support for interchangeable
lenses
Lens mount
Nikon 1 mount
Effective angle of view Approx. 2.7× lens focal length (35 mm format
equivalent)
Effective pixels
18.4 million
Image sensor
Image sensor
13.2 mm × 8.8 mm CMOS sensor (Nikon CX for-
mat)
Storage
Image size (pixels)
Still images taken in auto, best moment capture, and all
creative modes other than easy panorama (aspect ratio 3 : 2)
• 5232 × 3488
• 3920 × 2616
• 2608 × 1744
Still images taken in normal panorama mode with camera
panned horizontally (aspect ratio 120 : 23)
4800 × 920
Still images taken in normal panorama mode with camera
panned vertically (aspect ratio 8 : 25)
1536 × 4800
Still images taken in wide panorama mode with camera
panned horizontally (aspect ratio 240 : 23)
9600 × 920
Still images taken in wide panorama mode with camera
panned vertically (aspect ratio 4 : 25)
1536 × 9600
Still images taken during movie recording (aspect ratio 3 : 2)
• 5232 × 3488 (1080/60p, 1080/30p)
• 1472 × 984 (720/60p, 720/30p)
Motion Snapshots (photo portion, aspect ratio 16 : 9)
5232 × 2936
n
216
File format
• NEF (RAW): 12-bit, compressed
• JPEG: JPEG-Baseline compliant with fine (approx.
1 : 4), normal (approx. 1 : 8) compression
• NEF (RAW) + JPEG: Single photograph recorded in
both NEF (RAW) and JPEG formats
Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait,
Landscape; selected Picture Control can be mod-
ified; storage for custom Picture Controls
Media
microSD (micro Secure Digital), microSDHC, and
microSDXC memory cards
File system
DCF 2.0, DPOF, Exif 2.3, PictBridge
Shooting modes
C auto; w creative, with a choice of the follow-
ing options: P, S, A, M, 4 creative palette, 5 HDR,
p easy panorama, q soft, r miniature effect, s
selective color, 6 cross process, and 7 toy cam-
era effect; u best moment capture (s Active
Selection, t slow view and y Smart Photo
Selector); v advanced movie (0 HD movie,
y slow motion, 2 jump cut, 1 fast motion and
3 4-second movie), z Motion Snapshot
Shutter
Type
Speed
Electronic shutter
/
1
16,000–30 s in steps of 1
3 EV; Bulb
/
Note: Bulb ends automatically after approximately 2 minutes
Flash sync speed
Synchronizes with shutter at X=1
/60 s or slower
Release
Mode
• Single frame, continuous
• Self-timer
Frame advance rate
Self-timer
Approx. 5, 10, 20, 30, or 60 fps
2 s, 10 s
n
217
Exposure
Metering
Metering method
TTL metering using image sensor
• Matrix
• Center-weighted: Meters 4.5 mm circle in center of
frame
• Spot: Meters 2 mm circle centered on selected
focus area
Mode
P programmed auto with flexible program;
S shutter-priority auto; A aperture-priority auto;
M manual; h scene auto selector
Exposure compensation –3–+3 EV in increments of 1
/3 EV
Exposure lock
Luminosity locked at metered value when shut-
ter-release button is pressed halfway
ISO sensitivity
ISO 160; ISO 200–12800 in steps of 1 EV; 6400
(Recommended Exposure (NR); 12800 (NR); auto ISO sensitivity control (ISO
Index)
160–6400, 160–3200, 160–800) available (user controlled in P,
S, A, and M modes)
Active D-Lighting
On, off
Focus
Autofocus
Hybrid autofocus (phase-detection/contrast-
detect AF); AF-assist illuminator
• Autofocus (AF): Single AF (AF-S); continuous AF
(AF-C); auto AF-S/AF-C selection (AF-A); full-
time AF (AF-F)
Lens servo
• Manual focus (MF)
AF-area mode
Focus area
Single-point, auto-area, subject tracking
• Single-point AF: 171 focus areas; the center 105
areas support phase-detection AF
• Auto-area AF: 41 focus areas
Focus lock
Focus can be locked by pressing shutter-release
button halfway (single AF)
Face priority
On, off
n
218
Flash
Built-in flash
• Auto; Soft, Miniature effect, Selective color, Cross pro-
cess, Toy camera effect (Creative mode): Flash pops up
automatically and fires as required
• P programmed auto, S shutter-priority auto, A aperture-
priority auto, M manual (Creative mode): Manual pop-
up
Guide Number (GN)
Approx. 5/16 (m/ft, ISO 100, 20 °C/68 °F; at ISO
160, Guide Number is approx. 6.3/20.7)
i-TTL flash control using image sensor
Auto, auto + red-eye reduction, fill flash, fill flash
+ slow sync, red-eye reduction, red-eye reduction
+ slow sync, rear-curtain sync, rear curtain + slow
sync, off
Control
Mode
Flash compensation
Flash-ready indicator
–3–+1 EV in increments of 1
3 EV
/
Lights when built-in flash unit is fully charged
White balance
Auto, incandescent, fluorescent, direct sunlight,
flash, cloudy, shade, underwater, preset manual,
all except preset manual with fine tuning
n
219
Movie
Metering
Metering method
TTL metering using image sensor
• Matrix
• Center-weighted: Meters 4.5 mm circle in center of
frame
• Spot: Meters 2 mm circle centered on selected
focus area
Frame size (pixels)/
recording rate
HD movies (aspect ratio 16 : 9)
• 1920 × 1080/60p (59.94 fps)
• 1920 × 1080/30p (29.97 fps)
• 1280 × 720/60p (59.94 fps)
• 1280 × 720/30p (29.97 fps)
Slow-motion movies
• 1280 × 720/120 fps
(aspect ratio 16 : 9; plays at 30p/29.97 fps)
• 768 × 288/400 fps
(aspect ratio 8 : 3; plays at 30p/29.97 fps)
• 416 × 144/1200 fps
(aspect ratio 26 : 9; plays at 30p/29.97 fps)
Fast-motion, jump-cut, and 4-second movies (aspect ratio
16 : 9)
1920 × 1080/30p (29.97 fps)
Motion Snapshots (movie portion, aspect ratio 16 : 9)
1920 × 1080/60p (59.94 fps) (plays at 24p/23.976 fps)
MOV
File format
Video compression
H.264/MPEG-4 Advanced Video Coding
Audio recording format PCM
Audio recording device Built-in stereo microphone; sensitivity adjustable
Monitor
7.5 cm (3-in.), approx. 1037k-dot, TFT LCD touch
screen with brightness adjustment
Playback
Full-frame and thumbnail (4, 9, or 16 images or
calendar) playback with playback zoom, movie
and panorama playback, slide show, histogram
display, auto image rotation, and rating option
Interface
USB
n
Hi-Speed USB
HDMI output
Type D HDMI connector
220
Wireless
Standards
IEEE 802.11b, IEEE 802.11g
Communications
protocols
• IEEE 802.11b: DSSS/CCK
• IEEE 802.11g: OFDM
Operating frequency
Range (line of sight)
2412–2462 MHz (channels 1–11)
Approximately 10 m/33 ft (assumes no interfer-
ence; range may vary with signal strength and
presence or absence of obstacles)
54 Mbps
Maximum logical data rates according to IEEE
standard. Actual rates may differ.
• Authentication: Open system, WPA2-PSK
• Encryption: AES
Data rate
Security
Wireless setup
Supports WPS
Access protocols
Infrastructure
Supported languages
Arabic, Bengali, Bulgarian, Chinese (Simplified
and Traditional), Czech, Danish, Dutch, English,
Finnish, French, German, Greek, Hindi, Hungar-
ian, Indonesian, Italian, Japanese, Korean, Mar-
athi, Norwegian, Persian, Polish, Portuguese
(European and Brazilian), Romanian, Russian, Ser-
bian, Spanish, Swedish, Tamil, Telugu, Thai, Turk-
ish, Ukrainian, Vietnamese
Power source
Battery
AC adapter
One rechargeable Li-ion EN-EL22 battery
EH-5b AC adapter; requires EP-5E power connec-
tor (available separately)
1
Tripod socket
/
4-in. (ISO 1222)
Dimensions/weight
Dimensions (W × H × D) Approx. 99.5 × 60.0 × 28.5 mm (3.9 × 2.4 × 1.1 in.),
excluding projections
Weight
Approx. 232 g (8.2 oz) with battery and memory
card but without body cap; approx. 192 g (6.8 oz),
camera body only
n
Operating environment
Temperature
0 °C–40 °C (+32 °F–104 °F)
Humidity
85% or less (no condensation)
221
• Unless otherwise stated, all figures are for a camera with a fully-charged bat-
tery operating at the temperature specified by the Camera and Imaging
Products Association (CIPA): 23 3 °C (73.4 5.4 °F).
• Nikon reserves the right to change the specifications of the hardware and
software described in this manual at any time and without prior notice.
Nikon will not be held liable for damages that may result from any mistakes
that this manual may contain.
MH-29 battery charger
Rated input
AC 100–240 V, 50–60 Hz, 0.2 A
Rated output
DC 8.4 V/0.6 A
Supported batteries
Charging time
Nikon EN-EL22 rechargeable Li-ion batteries
Approx. 3 hours at an ambient temperature of
25 °C (77 °F) when no charge remains
Operating temperature 0 °C–40 °C (+32 °F–104 °F)
Dimensions (W × H × D) Approx. 67.0 × 28.0 × 94.0 mm (2.6 × 1.1 × 3.7 in.),
excluding plug adapter
Weight
Approx. 83 g (2.9 oz), excluding plug adapter
EN-EL22 rechargeable Li-ion battery
Type
Rated capacity
Rechargeable lithium-ion battery
7.2 V, 1010 mAh
Operating temperature 0 °C–40 °C (+32 °F–104 °F)
Dimensions (W × H × D) Approx. 30.7 × 50.0 × 13.0 mm (1.2 × 2.0 × 0.5 in.)
Weight
Approx. 39 g (1.4 oz), excluding terminal cover
n
222
1 NIKKOR VR 10–30mm f/3.5–5.6 PD-ZOOM
Type
1 mount lens
Focal length
Maximum aperture
Construction
10–30 mm
f/3.5–5.6
9 elements in 7 groups (including 4 aspherical lens ele-
ments, 1 ED lens element, and HRI lens elements)
77°–29° 40′
Angle of view
Vibration reduction
Lens shift using voice coil motors (VCMs)
Minimum focus distance 0.2 m (0.7 ft) from focal plane at all zoom positions
Diaphragm blades
Diaphragm
7 (rounded diaphragm opening)
Fully automatic
Aperture range
• 10 mm focal length: f/3.5–16
• 30 mm focal length: f/5.6–16
Approx. 58 mm diameter × 28 mm (distance from
camera lens mount flange when lens is retracted)
Approx. 85 g (3.0 oz)
Dimensions
Weight
1 NIKKOR 11–27.5mm f/3.5–5.6
Type
1 mount lens
Focal length
Maximum aperture
Construction
11–27.5 mm
f/3.5–5.6
8 elements in 6 groups (including 1 ED lens element and
1 aspherical lens element), 1 protective glass element
72°–32° 20′
Angle of view
Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions
Diaphragm blades
Diaphragm
7 (rounded diaphragm opening)
Fully automatic
Aperture range
• 11 mm focal length: f/3.5–16
• 27.5 mm focal length: f/5.6–16
Filter-attachment size 40.5 mm (P=0.5 mm)
Dimensions
Approx. 57.5 mm diameter × 31 mm (distance from
camera lens mount flange when lens is retracted)
Weight
Approx. 83 g (3.0 oz)
Specifications subject to change without notice. Nikon will not be held liable
for damages that may result from any mistakes that this manual may contain.
n
223
1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens
format digital cameras. The angle of view is equivalent to a
35 mm format lens with a focal length about 2.7× longer. The
1 NIKKOR VR 10–30mm f/3.5–5.6 PD-ZOOM supports vibration
reduction and can be used with vibration reduction On or Off
Lens Care
A
• Keep the CPU contacts clean.
• Use a blower to remove dust and lint from the lens surfaces. To
remove smudges and fingerprints, apply a small amount of ethanol or
lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and
clean from the center outwards using a circular motion, taking care
not to leave smears or touch the glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean
the lens.
• A lens hood or NC filter can be used to protect the front lens element.
When using an optional lens hood, do not pick up or hold the lens or
camera using only the hood. Lens hoods and filters are not available
for the 1 NIKKOR VR 10–30mm f/3.5–5.6 PD-ZOOM.
• When the lens is not in use, attach the rear cap and either ensure that
the lens is retracted and the cover closed (1 NIKKOR VR 10–30mm
f/3.5–5.6 PD-ZOOM) or attach the front cap (other lenses).
• If the lens will not be used for an extended period, store it in a cool,
dry location to prevent mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal mechanism can cause irrep-
arable damage.
• Leaving the lens in extremely hot locations could damage or warp
parts made from reinforced plastic.
• When using the 1 NIKKOR VR 10–30mm f/3.5–5.6 PD-ZOOM, be sure
not touch the lens cover. Failure to observe this precaution could
result in product malfunction.
n
225
Supplied Accessories
A
• 40.5 mm snap-on Front Lens Cap LC-N40.5 (for use with the 1 NIKKOR
11–27.5mm f/3.5–5.6)
• Rear Lens Cap LF-N1000
Optional Accessories
A
• 40.5 mm screw-on filters (for use with the 1 NIKKOR 11–27.5mm
f/3.5–5.6)
• 40.5 mm screw-on Hood HN-N102 (for use with the 1 NIKKOR
11–27.5mm f/3.5–5.6; attaches as shown below)
n
226
❚❚ The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1
mount adapter. Before proceeding, be sure that you have read
and understood this manual and the documentation for the FT1
and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses sup-
port manual focus only. Set the camera focus mode to AF-S or
AF-C. The only AF-area mode available is Single-point and the
camera focuses on the subject in the center focus area only. Face
priority is not supported. In some cases, a beep may sound, the
in-focus indicator may be displayed, and pictures can be taken
when the camera is not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1
with a NIKKOR F mount lens.
1 Select manual focus mode.
In the shooting menu, select Focus mode, highlight Manual
focus, press 2, and choose the magnification for the manual
2 Focus.
Rotate the lens focus ring until the
subject is in focus.
n
227
If AF-S or AF-C is selected for Focus mode and the lens sup-
ports autofocus with manual override, you can focus using
autofocus and then keep the shutter-release button pressed
halfway and rotate the lens focus ring to fine-tune focus man-
ually. To refocus using autofocus, press the shutter-release
button halfway again.
To zoom in on the display for more
precise focus, press J (note that this
feature is not available during movie
recording or in slow-motion movie
mode). The display will be zoomed in
to the magnification selected in Step 1
and a navigation window will appear
in a gray frame at the bottom right of
the display.
Navigation window
Use the multi selector to scroll to areas
of the frame not visible in the display.
Press J to exit zoom.
n
228
The Electronic Rangefinder
If a CPU lens is attached in manual focus
mode, the focus indicator can be used to
check whether the camera is focused on
the subject in the center focus area.
Focus indicator
I
Status
In focus.
2
Camera focused in front of subject.
Camera focused behind subject.
4
2
4
Unable to determine focus.
(flashes)
Note that with some subjects, the in-focus indicator (I) may be
displayed when the camera is not in focus. Check focus in the
display before shooting.
Error Messages and Displays
The following warnings appear in the camera aperture display.
Display
Problem
Solution
When using CPU lenses, lock
aperture ring at minimum aper-
ture (highest f-number).
When using non-CPU lens, rotate
lens aperture ring to adjust aper-
ture.
Lens aperture ring is not
locked at minimum aperture.
FEE
Non-CPU lens is attached, or
no lens is attached.
F––
Restrictions
• Auto and best moment capture modes are not supported.
• Motion Snapshots can be recorded only when an AF-S lens is
attached and the camera is in autofocus mode and then only
when the subject is in focus. Do not attempt to adjust focus
using the focus ring.
• Shutter speeds of 1 s or slower are not available.
• The sound monitor switch and focus operation button (Focus
Lock/MEMORY RECALL/AF Start) have no effect.
n
229
Precautions for Use
• Lenses over 380 g (13.4 oz) should be supported at all times. Do
not hold the camera or carry the camera by the strap without
supporting the lens. Failure to observe this precaution could
damage the camera lens mount.
• Lines may appear in photographs taken with non-CPU lenses
stopped down to minimum aperture.
• In advanced movie mode, select exposure mode A or M to pre-
vent sounds made by the lens being picked up by the micro-
phone.
• During continuous shooting, focus is fixed at the position for
the first shot in each burst. Frame rates may slow when I is
selected in continuous mode.
• Certain lenses will block the AF-assist illuminator and, at some
distances, the flash.
• The tops and bottoms may be missing from circular bokeh
shapes created at wide apertures using lenses with a maximum
aperture of f/1.4.
n
230
❚❚ Supported Standards
• DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is
a standard widely used in the digital camera industry to ensure
compatibility among different makes of camera.
• DPOF: Digital Print Order Format (DPOF) is an industry-wide
standard that allows pictures to be printed from print orders
stored on the memory card.
• Exif version 2.3: The camera supports Exif (Exchangeable Image
File Format for Digital Still Cameras) version 2.3, a standard in
which information stored with photographs is used for optimal
color reproduction when the images are output on Exif-com-
pliant printers.
• PictBridge: A standard developed through cooperation with the
digital camera and printer industries, allowing photographs to
be output directly to a printer without first transferring them to
a computer.
• HDMI: High-Definition Multimedia Interface is a standard for
multimedia interfaces used in consumer electronics and AV
devices capable of transmitting audiovisual data and control
signals to HDMI-compliant devices via a single cable connec-
tion.
n
231
Trademark Information
A
Mac and OS X are registered trademarks of Apple Inc. in the United
States and/or other countries. Microsoft, Windows, and Windows Vista
are either registered trademarks, or trademarks of Microsoft Corpora-
tion in the United States and/or other countries. The PictBridge logo is
a trademark. The microSD, microSDHC, and microSDXC logos are trade-
marks of SD-3C, LLC. HDMI, the HDMI logo and High-Definition Multi-
media Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the
Wi-Fi Alliance. All other trade names mentioned in this manual or the
other documentation provided with your Nikon product are trade-
marks or registered trademarks of their respective holders.
FreeType License (FreeType2)
A
Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
A
Portions of this software are copyright © 2014 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights
reserved.
n
232
Battery Life
The number of shots or movie footage that can be recorded with
fully-charged batteries varies with the condition of the battery,
temperature, the interval between shots, and the length of time
menus are displayed. Sample figures for EN-EL22 (1010 mAh)
batteries are given below.
• Still images: Approximately 300 shots
• Movies: Approximately 70 minutes at 1080/30p
Measured according to CIPA standards at 23 3 °C (73.4 5.4 °F)
with the camera at default settings, a fully-charged battery, a
1 NIKKOR VR 10–30mm f/3.5–5.6 PD-ZOOM lens, and a 16GB
SanDisk SDSDQXP-016G-J35 UHS-I microSDHC card. Value for
still images obtained under the following test conditions: pho-
tographs taken at intervals of 30 s with the built-in flash fired
with every other shot and the camera turned off and then on
after every ten shots. Value for movies obtained under the fol-
lowing test conditions: a series of 20 minute movies with a file
size of up to 4 GB were recorded; recording was only inter-
rupted when temperature warning was displayed.
The following can reduce battery life:
• Keeping the shutter-release button pressed halfway
• Repeated autofocus operations
• Taking NEF (RAW) photographs
• Slow shutter speeds
• Using Wi-Fi
• Using vibration reduction mode with VR lenses
• Using zoom with power zoom lenses
To ensure that you get the most from rechargeable Nikon
EN-EL22 batteries:
• Keep the battery contacts clean. Soiled contacts can reduce
battery performance.
• Use batteries immediately after charging. Batteries will lose
their charge if left unused.
n
233
Index
Symbols
C (continuous shooting/self-timer) .
Numerics
4-second movie ................................. 57
A
Accessories ........................................192
Active D-Lighting ............................152
Adobe RGB ........................................151
AF-A .....................................................155
AF-area mode ...................................159
AF-C .....................................................155
AF-F ......................................................155
AF-S ......................................................155
Audio ..................................................... 77
Auto distortion control .................150
Auto image capture .......................168
Auto photography ..........................168
n
234
Automatic scene selection .............33
Auto-select AF ................................. 155
Available settings ........................... 202
Crop .....................................................134
Crop (PictBridge) .............................124
D
DCF version 2.0 ................................231
Defaults ..............................................205
Delete all images .............................109
Display ................................................185
Display brightness ..........................185
D-Lighting .........................................132
B
Best moment capture mode .........63
Built-in AF assist .............................. 161
Bulb ........................................................45
C
Capture 20 frames over ................ 146
Charging a battery ............................16
Clock battery .......................................26
Close up ................................................33
Color space ....................................... 151
Combine 4-second movies ......... 137
Combine NMS movies .................. 138
Compatible lens .............................. 192
Continuous ..........................................79
Continuous AF ................................. 155
Creative mode ....................................38
E
Edit movie ..........................................135
Electronic VR .....................................154
Exposure compensation ................. 83
Exposure indicator ............................ 45
Exposure mode ................................142
F
File format ..........................................148
Fill flash ................................................. 87
Filter strength ...................................148
n
235
Firmware version .............................191
Flash compensation .......................163
Flicker reduction ..............................188
Focus mode .......................................155
Format memory card ..............19, 185
Frame size/frame rate ....................167
Frames saved (default) ..................146
FT1 ........................................................227
Full-frame playback .................31, 103
Full-time AF .......................................155
I
Image processing menu ...............169
Image review ....................................131
Image selection ...............................130
Image size ..........................................143
Index print .........................................126
ISO sensitivity ...................................175
J
JPEG .....................................................143
L
Lens mount .......................................158
Live image control ............................ 36
Load from/save to card .................181
M
Manual focus ....................................157
Matrix (Metering) ............................149
Maximum aperture ........................223
Memory card access lamp ............. 30
Metering ............................................149
microSD card ....................................194
Miniature effect ................................. 39
Monochrome ...................................176
Movie menu ......................................164
G
H
H.264 ....................................................220
HDMI-CEC ..........................................122
High ISO noise reduction .............182
Histogram ..........................................105
Hue .......................................................178
n
236
Movie sound options .................... 168
Multi selector ........................................ 7
Printing ...............................................123
Protect .................................................131
Push-button WPS .............................. 95
N
Q
Nikon Transfer 2 .............................. 119
Number of copies ........................... 124
Quick adjust ......................................178
R
Removing the lens from the camera
Reset movie options ......................166
Reset processing options .............170
Reset shooting options .................142
Resize ..................................................133
O
Optical VR .......................................... 153
P
Page size (PictBridge) .................... 124
Pixel mapping .................................. 191
Playback menu ................................ 128
Power switch .......................................23
Press the shutter-release button all
Press the shutter-release button
Rotate tall ...........................................131
S
Saturation ..........................................178
Saturation (Toy camera effect) ...149
Scene auto selector ........................142
Scene selection .................................. 39
Select color .......................................... 52
Select to send to smart device ...101
Sensitivity ..........................................175
Sharpening ........................................178
Shooting menu ................................139
Shutter button AE lock ..................187
Print date ........................................... 127
Print DPOF print order .................. 126
Print time stamp ............................. 124
n
237
Single-point ......................................159
Slide show ..........................................111
Slot empty release lock .................185
Spot (Metering) ................................149
sRGB .....................................................151
Standard .............................................176
Start printing (PictBridge) ............125
System requirements .....................116
V
View SSID ............................................. 97
ViewNX 2 ............................................114
Vignetting ..........................................149
Vivid .....................................................176
W
Wind noise reduction ....................168
Z
T
Television ...........................................121
Temperature warnings .................. xvii
Time zone and date ........................189
n
U
Underwater .......................................170
Underwater flash units ..................193
238
No reproduction in any form of this manual, in whole or in
part (except for brief quotation in critical articles or reviews),
may be made without written authorization from NIKON
CORPORATION.
SB4C01(11)
6MVA6411-01
|
