Metz Tiros 63 TG 51 100 MT Ibiza SF 63 TG 62 100 MT Morea S 70 TG 65 100 MT Crystal70 TG 53 100 MT Linea deluxe SF 72 TG 67 100 MT user manual _ Free Download Borrow and Streaming

TV. VIDEO. AUDIO. MECABLITZ

Tiros

63 TG 51 - 100 MT

63 TG 62 - 100 MT

70 TG 65 - 100 MT

Ibiza-SF

Morea-S

Crystal

70 TG 53 - 100 MT

Linea

–SF 72 TG 67 - 100 MT

de luxe

Operating instructions

Remote control handset RB 11

The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at

the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use

infrared light (such as infrared headphones).

The television must be switched on or in standby mode (ON/OFF key depressed) when it is to be operated by remote control. Always point the

remote control in the direction of the TV for operation. A pilot lamp starts to flash as soon as a key on the remote control handset is pressed.

Nota:

• Infrared window

For explanation of the video level for

the remote control of video recorders,

please refer to Section 13, page 42.

RB11

Do not point the remote control

unit into your eyes and press a

key on it !

• ON - Set switches to last viewed pro-

gramme

• OFF (standby setting)

100 Hz

VTR

Do not use rechargeable batteries

in the remote control unit.

• Numeric keys

• Switch between the TV and radio fun-

ctions (radio only if a SAT upgrade kit

is installed)

• Mute (page 14)

-/--

• Change the setting

• HiText - select page of a multiple-

page subject (page 32)

TIMER

• Next programme (page 6)

• HiText - select page number from table

of contents with cursor (page 32)

•

Basic picture and sound settings (page 15)

• Hi-Text - display the page (page 33)

•

Select picture function (page 14)

HiText - select subject (page 30)

• Return to TV picture from menu or

from Hi Text

• Call TV menu (page 7)

Within a menu, move back one step

•

Select sound function (page 14)

HiText - select chapter (page 30)

• Operator Help

•

Call station table

HiText - next page (page 31)

•

AV recording (page 23)

HiText - skip to next mark (page 37)

REC

•

Function keys, depending on

programming (page 16)

•

Logo display (display of time, program-

me, and sound mode

• Clear key in various menus

• HiText- set or delete mark (pages 35/38)

• Return to the last programme (page 7)

PRG.

• Changeover from spoken to

music broadcasts

• Change of format (variable zoom) (page 40)

• Still picture (page 41)

Batteries:

Insert the enclosed batteries in the remote

control, observing the symbols on the cover of

the battery compartment.

Disposal of batteries

Remove exhausted batteries from the remote

control and return them to your dealer or to an

authorised battery collection point.

Do not dispose of spent batteries with domestic rubbish.

Please return spent batteries to collecting points should they exist in your country !

1. Setting up and connecting

Setting up

Connecting the aerial

When selecting a suitable place for the TV, be sure that no bright

light or sunlight falls on the screen. Light may cause reflections

and impair the brilliance of the image.

Standard SAT and terrestrial station aerial sockets are fitted at

the rear of the TV.

The best viewing distance is five times the picture tube diagonal,

e.g. about 3.5 m for TV sets with a 70 cm screen.

Thunderstorms represent a danger for all electrical appliances! If

lightning strikes the power line or the aerial, the TV may be dama-

ged even if it is switched off. Therefore, always unplug the mains

lead AND aerial during thunderstorms.

5x cm

If the TV is not going to be used for an extended period of time, for

instance when on holiday, then disconnect the set both from the

mains and the aerial.

TV sets require adequate ventilation. The ventilation

slots at the rear of the set should therefore never be

covered by curtains, doilies, newspapers or similar

objects. Likewise, all slots at the bottom of the set

must be freely accessible so that the intake of air is

not impaired in any way

Aerial connection

2EURO-600

Do not set up the TV near a radiator as this would

impair adequate cooling.

Mains voltage

Do not place

Plug the mains lead into a wall

outlet. The TV set is equipped for

230 V ac (Australia 240 V ac).

burning candles or

- flower vases filled with water

on top of the TV set.

Hot wax and liquids destroy the electrical components

and jeopardize the electrical safety of the set

If you place the set in a wall unit, leave sufficient space

on all sides so that the air can circulate freely.

Your TV set is intended for use in dry rooms. If you wish

to use it occasionally outdoors, be sure to protect it

against any kind of moisture (rain, splashes, dew, etc.).

1.1 Turning the TV on and off

Turning on with the ON/OFF key

Turning on with the remote control

The programmes can be directly selected with the 0-9 keys

when the television is in standby mode.

The last programme watched before the television was switched

Before turning on a cold TV in a warm room, first

allow any condensation mist that may have formed

on the screen to evaporate.

off can be set with the

key.

The television is automatically set to standby mode ten minutes

after station closedown. However, this is not the case if the

station starts to transmit a test card within these ten minutes.

Press the ON/OFF key.

Programme position 1 is then selected. Depending on the assign

ments made, the following information will appear in the screen

box:

Turning off with the remote control

Press the

key to switch the TV to standby mode. The stand-

by status is indicated by the red lamp.

Pr 1

MONO

Turning off with the ON/OFF key

ARD

18:15:33

Press the ON/OFF key. The television is now disconnected from

the mains. You are advised to turn off the TV with the ON/OFF

key after station closedown and when it is not going to be used

for an extended period of time.

The programme position is also shown on the permanent dis-

play.

1.2 The TV menu

The screen displays

Press this key on the remote

control....

Explanation

return

picture

Help

The desired language for the entire TV menu is

adjusted in the „Equipm.Configuration“ menu.

1. Call the Equipm.

Configuration menu

Equipm. configuration

Function keys

Select the desired language with the

keys when

red

green

the submenu for the language is displayed on a green

background.

Device connection

SAT settings

--/-

2. Adjust the language

Press the

key to confirm and store the selection

made. The complete text in the TV menu is then

displayed in the selected language.

Language:

further

English

store ?

3. Store the selected language

6 9 6 + 0 5 A - G B

TV picture

Programme position

management

2. Programme selection

This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all

of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not

know how many programmes will be available in the future. For this reason, we have provided plenty of programme positions in reserve. For

selection of the desired programme position, we have invented a simple input method which saves you having to enter three digits for each position.

The first digit you enter is normally the hundreds digit. If, however, you have less than 100 programmes stored, this digit auto-

matically moves to the tens position. If you have less than ten programmes stored, it moves to the units position.

ᕪ

ꢀ

Example: you have stored programmes in positions 1 to 35 and you want to select position 3. Press the keys and or simply and

confirm with

ᕤ

. Programme position 4 can be selected by simply entering , since there are no programme positions higher than 39.

Further examples are shown in the following text.

Press this key on the remote

The screen displays

Explanation

control....

Only the programme positions 0-9 in the station table

may be occupied if a programme is to be selected by

pressing one numeric key.

1. Select programme position

2 (only the first 9 programme

positions in the station table

are occupied)

Pressing the numeric key opens a time-delay win-

dow* which waits for 3 seconds for the input of

further digits. If no further numeric key is pressed,

the TV set switches to the programme position

selected with the first digit.

Pr 2

MONO

ZDF

18:15:33

* The operating mode of this time delay window can

be changed: see page 18, item 5, „PC time out“.

Only the programme positions 0-99 in the station table

may be occupied if a programme is to be selected by

pressing two numeric keys.

2. Select programme position

25 (only the first 99 pro-

gramme positions in the

station table are occupied)

After a programme has been selected successfully, a box

containing the programme position number, the time and the

current sound mode (e.g. stereo) is displayed on the screen.

Pr 25

MONO

To select a programme position with only a single-digit

ᕪ

S-RTL

number, you must enter

before the related digit,

18:15:48

ᕪ

ᕢ

e.g.

and ; alternatively, you can press

and

then press

3. Select programme position

101 (more than 100 pro-

gramme positions in the

station table are occupied)

In this case, more than 100 programme positions in

the station table are occupied, which means that you

have to press three numeric keys.

After a programme has been selected successfully, a box

containing the programme position number, the time and the

current sound mode (e.g. stereo) is displayed on the screen.

To select a programme positions with a single-digit or

Pr 101

MONO

ᕪ

two-digit number, you must enter

before the

and ; alternatively, you

Nord3

18:15:48

ᕪ ᕪ

ᕢ

related digit(s), e.g.

ᕢ

can press and then press

You can step sequentially through the programme

4. Next programme

positions with the

keys. If either of these keys

ZDF

is held down for more than two seconds, a programme

BR3

RTL

box for selection of the desired programme is displayed

SAT1

RTL2

PRO7

EUSPO

NTV

on the screen. Release the

key as soon as

the desired logo is highlighted in white: this programme

position will then be selected.

NORD3

MDR3

SWF3

Pr 3

MONO

Bayern 3

18:15:48

2. Programme selection

Press this key on the remote

control....

The screen displays

Explanation

Last programme

With this key, you can switch back and forth between

the last two programme positions you selected.

Example:

You are watching a programme on ITN; during the

commercials, you switch to BBC with the aid of the

ᕪ . .ᕩ

numeric keys

PRG.

You can now switch back and forth between ITN and

PRG.

BBC by pressing the

key.

2.1 TV menu and operator help

Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and clearly

comprehensible for everyone. Operator Help can be called with the

individual keys.

key when in TV mode. Operator Help indicates the functions of the

All settings are entered by way of different submenus. Simply call Operator Help with the

key should you encounter difficulties in entering

the different equipment configurations or if problems arise in operating the TV. Operator Help is specifically matched to the corresponding menu

and functions as a reminder when settings are entered or programmed.

Press this key on the remote

The screen displays

Explanation

control....

return

Operator Help shows the functions of the individual

keys when in TV mode.

Operator Help: Call/exit

Operator help

Switch set on/off

Prog select

The A, B, and C function keys can be programmed by

the user. Consequently their functions can differ to

those shown in the adjoining picture.

Next programme

Basic video/audio settings

Sound interrupt

Change vol./adj. function

Sel.video/audio funct.

--/-

Station table

AV recording

Logo

Operator Help can be called for each menu displayed

on the screen. (Example: Operator Help with displayed

TV menu).

Teletext/TV picture

TV-menu

Operator help : ON / OFF

Muting -12dB

sound effects

Infotext

Last program

Var. format

Spch/mus.

Still

600+Help-GB

return

picture

Help

The individual menu lines are selected with the coloured

keys of the remote control, to open the corresponding

submenu. Keys not enhanced in white or colour on the

displayed menu have no function in the current

operating state.

TV menu: Call/exit

TV-menu

Video standard values

Audio standard values

Station settings

--/-

Settings in the submenus can be changed

with the

keys.

Press the

key to confirm and store the

Timer/childlock

new setting.

Press the

key to move back by one step

Equipm. configuration

within the TV menu.

6 9 6 + 0 2 - G B

Colour and transmission

standards

3. Presetting TV stations

In the sub-menu Standard, you can select the colour and/or the transmission standard. The TV set normally recognises the colour stan-

dards (PAL, SECAM, NTSC) automatically, but the transmission standard must always be set manually. The multi-standard upgrade kit is

required for the additional transmission standards L, I, D/K and NTSC 4.43. In exceptional cases, the colour standard may not be recogni-

sed; if this happens, you must set it as described below.

Example:

The colour standard „NTSC“ is to be set.

Press this key on the remote

The screen displays

Explanation

control....

The automatic function of the submenu „Standard“ is

preset in the factory.

return

picture

Help

1. Call submenu „Standard“

TV station table

The settings PAL, SECAM and NTSC need to be selecte

manually only if the automatic detection function does

not recognize the colour standard correctly.

Programme

Pict. Sound

Std

VTR1

ARD

ZDF

Auto.

—

white

red

SAT 1

Standard

Colour standard

B/G

Automatic

white

<< weitere Einstellungen

Logo, Channel, Signal

6 0 0 + 0 3 K - G B

ꢀ The transmission standard must always be set

return

picture

Hel

2. Select the transmission

standard or colour standard

(e.g. standard I)

manually.

TV station table

Programme

The various standards can be selected with the

keys.

Pict. Sound

Std

In this example, the transmission standard NTSC is

selected.

VTR1

ARD

ZDF

Auto.

—

B/G

NTSC

SAT 1

The multi-standard upgrade kit 031 NC 1030 (optional

extra) is required for the reception of the transmission

standards L, I, D/K and NTSC 3,58.

yellow

Standard

Colour standard

_{<< weitere Einstellu}s_ngt_eo_nre ?

Logo, Channel, Signal

3. Store the settings and

return to the TV picture

Direct channel entry/

station search

3. Presetting TV stations

When the TV set leaves the factory, there are no stations programmed. Depending on where you live, the stations have different channel

numbers. There are three possible ways of programming the stations:

a) Direct channel input

b) Station search

c) the Autostore function

Press this key on the remote

control....

The screen displays

Explanation

With direct channel entry it is necessary to know the

return

picture

Help

1. Call the station table and

channel type survey

type of channel and the channel number.

TV station table

Logo

If type and number of channel are not known, you can

scan through the entire reception range with the

search function to locate stations.

Prog

Signal

Chan./Freq

LOGIC

ARD

Video Rec.1

Aerial

The station table lists all the preset stations.

These stations can be changed at any time.

ZDF

white

SAT 1

Std channel

ARD

Spec. channel

Fine tuning

SAT-Frequ.

The cursor always highlights the type of channel

currently preset in the given programme position.

yellow

Aerial control

>> weitere Einstellungen

Std, Pict., Sound

For the search function it is advisable to switch to a

vacant programme position.

6 9 6 + 0 3 A - G B

return

picture

Help

Two types of channels are offered in the box with the

yellow frame. Select the desired channel type with the

related coloured keys.

2. Select the type of channel

(e.g. standard channel)

TV station table

Prog

Logo

Signal

Chan./Freq

Once the channel type has been selected, a channel

number is displayed for the highlighted item if a station

is stored in this programme position. If no station is

stored, two dashes are displayed.

LOGIC

ARD

Video Rec.1

Aerial

blue

ZDF

SAT 1

Std channel

ARD

„SAT freq.“ and „Aerial control“ can be selected only if

a SAT upgrade kit is installed in the TV set.

Spec. channel

Fine tuning

SAT-Frequ.

Aerial control

>> weitere Einstellungen

Std, Pict., Sound

6 9 6 + 0 3 A - G B

return

picture

Help

With direct channel entry, the station table is briefly

faded out when the channel number is entered, and

the selected station is displayed.

3. Enter the channel number

(Example: Standard channel

06) or start station search

TV station table

Prog

Logo Chan./Freq

Signal

The station search proceeds from the displayed

channel number in a forward sequence with the

key, and in a reverse sequence with the ^-key.

Search proceeds from the lower channel area

upwards or downwards when two lines are displayed.

The search stops when a station has been found.

LOGIC

Video Rec.1

Aerial

ARD

ZDF

Aerial

SAT 1

Aerial

Std channel

ARD

Spec. channel

Fine tuning

SAT-Frequ.

Aerial control

Proceed as described in step 4 if the located station is

to be stored.

Press the or ^-key if the located station is not to be

stored so that the search can be continued.

>> weitere Einstellungen

Std, Pict., Sound

store ?

6 9 6 + 0 3 A - S - G B

4. Store the setting and return

to TV picture

Complete fine tuning if station reception is not clear

(see Section 3.2).

TV picture

Autostore function,

sorted to countries

3. Presetting TV stations

The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in

the station table and can then be stored by way of the

key.

If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as

described on the next page.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

1. Call the menu

„Station settings“

Station settings

Station table

Autostore

--/-

SAT programming

Station table

white

VTR

6 0 0 + 0 3 B - G B

return

picture

Help

Press the yellow key to call the autostore function.

2. Call and start the autostore

function

The coloured keys can now be used to select the

country so that the stations which are detected are

stored in a logical order for this country.

Autostore

Channel

Programme

Signal

Press the

key to start the station search. The TV

yellow

blue

set now scans through the entire reception range.

sort for

Germany

Austria

This function can be cancelled by pressing the

key.

Switzerland

others

6 9 6 + 0 3 C 1 - G B

start ?

Help

When all available stations have been found, a station

list is displayed on the screen.

return

picture

3. Edit and store the station list

Autostore

The channel number and an automatic logo are dis-

played. The auto logo only appears for stations which

transmit a VPS signal.

Signal

Programme Channel

ARD

ZDF

Aerial

You can now delete stations which are not wanted, or

which are received only poorly, by pressing the blue

key.

SAT 1

BR 3

WDR 3

MDR

PRO 7

RTL

Enter the number of the programme position at which

storage of the detected stations is to start.

Now proceed as described in Section 3.1 Sorting

station.

ARD

delete

18 stations

from nr. of progr.

0 0 1

3.1 Sorting stations

In the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is

displayed automatically after the autostore function has found all available stations.

This menu can also be called at any time from the station table display for subsequent modification of the station programming.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

When the „Sort“ submenu is displayed, the function

„Move“ is preset. The station displayed for the

currently selected programme position can be stored

or moved to any other programme position.

1. Call the „Sort“ submenu

and move the station

TV station table

Pro

Logo

Channe

Sign

either automatically after autostore

VTR2

Video

For a move, exchange or copy operation, the three-

digit number of the destination programme position

must be entered with the numeric keys. The blinking

hyphen on the right of the sub-menu is the prompt for

input of a programme position number.

ARD

Rec.2

Aerial

ZDF

SAT 1

RTL

BR 3

N 3

white

S23

MDR 3

SWF 3

MDR 3

S05

If you inadvertently delete a station you wanted to

keep, you can restore it with the B key.

sort

move

Pr1 ➔ Pr - -

Pr 1 ➔ Pr -

Pr1 ➔ Pr - -

Pr 1 ➔ Pr -

exchange

copy Pr 1 ➔ Pr - -

Pr 1 delete

An incorrectly entered programme position number

can be deleted with the C key.

return

picture

Help

2. Exchanging two programme

positions

TV station table

Pro

Logo

Channe

Sign

yellow

VTR2

Video

ARD

Rec.2

Aerial

You can swap the contents of two programme positions

by pressing the yellow key and entering the digits.

ZDF

SAT 1

RTL

BR 3

N 3

S23

MDR 3

SWF 3

MDR 3

S05

sort

move

exchange

copy Pr 1 ➔ Pr - -

Pr1

➔

Pr - -

Pr1 ➔ Pr - -

delete

return

picture

Help

After the contents of a programme position have been

moved, exchanged, copied or deleted, a red store box is

displayed to ask if you want to store the new settings.

3. Store the settings

TV station table

Pro

Logo

Channe

Sign

Press the

key to store the new settings or press

VTR2

Video

the

key to abort the operation.

ARD

Rec.2

Aerial

ZDF

SAT 1

RTL

BR 3

N 3

S23

MDR 3

SWF 3

MDR 3

S05

sort

move

Pr1 ➔ Pr - -

exchange

Pr1 ➔ Pr - -

copy Pr 1 ➔ Pr - -

Pr 1 delete

store ?

4. Return to TV picture

3.2 Fine tuning

The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient.

Apply manual fine tuning if automatic tuning does not produce satisfactory results.

Select the programme number at which fine tuning is to be completed.

Press this key on the remote

The screen displays

Explanation

control....

The „Fine tuning“ function is only activated when the

corresponding line is highlighted.

return

picture

Help

1. Select the fine tuning

function

TV station table

Chan./Freq

Prog

Logo

Signal

LOGIC

ARD

LogicVTR+D

Aerial

white

ZDF

Aerial

SAT 1

Aerial

Std channel

yellow

Spec. channel

Fine tuning

SAT-Frequ.

Aerial control

white

>> weitere Einstellungen

Std, Pict., Sound

6 9 6 - 0 3 G - G B

Adjus_-t fine tuning within the range of -99 to +99 with

2. Adjust the fine tuning

the

keys.

The station table is blanked out for better picture

assessment.

SAT 1

Std channel

Aerial

Spec. channel

Fine tuning

SAT-Frequ.

Aerial control

s85 -23.567 re B Q BT /F18 219.397 345f

>> weitere Einstellungen

3. Store the fine tuning and

return to TV picture

Once the station is correctly tuned, press the

to store the new setting.

key

3.3 Allocating a station logo

A logo of up to 8 characters is provided for each station via the VPS signal. The station RTL 2, for example, receives the logo RTL 2.

Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when

a station is selected by direct channel entry. However, an automatic logo only appears for stations which transmit a VPS signal.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

The logo is automatically displayed if the selected pro-

gramme position already has a logo. The field remains

blank if a logo has not yet been allocated.

1. Call the logo menu

TV station table

Chan./Freq

Prog

Logo

Signal

Automatically identified logos may consist of up to

8 characters. Manually allocated logos are limited

to 5 characters.

E1 FBAS

Antenne

Logo:

white

blue

ABCDEFGHIJKLMNOPQRSTUVW

Antenne

XYZ

0123456789

!+-

Antenne

select

Any existing logo will be overwritten.

next number

696+03H-GB

return

picture

Help

Select the desired_-character (in our example the letter

R) with the keys

2. Select the first character

TV station table

Logo Chan./Freq

This will overwrite any existing logo.

Prog

Signal

E1 FBAS

Antenne

Logo:

ABCDEFGHIJKLMNOPQRSTUVW

Antenne

XYZ

0123456789

!+-

Antenne

select

next number

6 9 6 + 0 3 I - G B

store ?

return

picture

Help

The cursor is moved within the logo field with the blue

key.

3. Move the cursor to the

second position and select

the second character

TV station table

Logo Chan./Freq

Select the desired_-character (in our example the letter

Prog

Signal

T) with the keys

blue

E1 FBAS

Antenne

Logo:

Repeat this procedure to enter the entire logo.

R T

ABCDEFGHIJKLMNOPQRSTUVW

Antenne

XYZ

0123456789

!+-

Antenne

select

next number

696+03J-GB

After input of the desired logo, press the

store it.

key to

4. Store the setting and return

to TV picture

The programmed logo automatically appears in the

station table.

TV picture

4. Changing individual picture settings

Press this key on the remote

control....

The screen displays

Explanation

Press the blue key to display the last adjusted func-

tion.

1. Adjusting the luminance

Continue pressing the blue key until the picture setting

value to be changed (e.g. luminance) is displayed.

Luminance

blue

40 change:

You can now adjust the contrast with the

keys.

Set the desired value with the

keys.

Contrast

Chrominance and sharpness are adjusted in the

same manner.

40 change

Chrominance

40 change

2. Adjusting the contrast

Sharpness

blue

02 change

4.1 Changing individual sound settings

Press this key on the remote

control....

The screen displays

Explanation

Press the yellow key to display the last adjusted function.

Continue pressing the yellow key until the volume field

Volume

1. Adjusting the volume

30 change:

is displayed on the screen.

Treble

yellow

Set the desired value with the

keys.

25 change

00 change

Bass

2. Adjusting the treble setting

Balance

Press the yellow key a number of times until the treb-

le field is displayed on the screen.

yellow

Set the desired value with the

keys.

Sound effects

Spatial sound On/Off

Bass, balance, sound effects and speaker sound-

mode settings are adjusted in the same manner.

change

Sound-mode speaker

Mono/Stereo/Chann.1/Chann.2

change

6 9 5 - D - G B

Press the

key to mute the sound.

Volume

3. Sound mute

change:

Renewed depression of the

to the previously adjusted volume.

key resets the sound

6 9 5 + D X - G B

Note:

All settings modified in this menu can be stored by calling the „Video standard values“ or „Audio standard values“ menu respectively

and pressing the

key. The stored values can be recalled at any time with the

key.

4.2 Adjusting the video and audio standard values

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

Press any coloured key to step through the submenus.

Pressing the blue key selects the „Video standard

values“ submenu, pressing the yellow key selects the

„Audio standard values“ submenu

1. Call the TV menu

TV-menu

Video standard values

Audio standard values

Station settings

--/-

Timer/childlock

Equipm. configuration

Luminance, contrast, chrominance, tint * and sharpness

can be adjusted in the „Video standard values“ sub-

menu. Select the menu line with the value to be chan-

ged by pressing the assigned colour keys.

The picture sharpness can be set as the standard

value for all programme positions in the menu „Video

6 9 6 + 0 2 - G B

return

picture

Help

2. Example 1: Call the „Video

standard values“ sub-

menu. Adjust and store

the sharpness.

Video standard values

standard values“. The new value can be saved by

Luminance

pressing the

key.

blue

Contrast

The volume, treble, bass and balance settings, as well

as the headphones volume, can be adjusted in a similar

manner in the „Audio standard values“ submenu.

The menu item „colour balance“ is displayed only

--/-

Chrominance

red

Tint

when receiving from an NTSC station.

Sharpness

Adjust the desired value with the

keys.

696+04Aa-GB

store ?

If no other video standard values or audio standard

values are to be changed, then press the

store the new setting.

key to

return

picture

Help

3. Example 2: Call the „Audio

standard values“ sub-

menu. Adjust and store

the volume.

The red store box disappears when the

pressed.

key is

Audio standard values

Volume

The value set in this manner remains stored even if

the TV is switched off with the main power switch.

yellow

Treble

--/-

Bass

Balance

Volume headphones

696+04B-GB

store ?

4. Return to TV picture

Assigning the

function keys

5. Equipment configuration

The remote control handset has three factory programmed function keys A, B and C. Press the

key in normal television mode to reveal

the factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This pro-

gramming can be changed according to your requirements in conformity with the displayed selection. This choice is described in the

„Glossary“ chapter.

Example of programming function key B: In TV mode, the B key is to activate the „subtitles“ function; in Hi Text mode, you can use it

for the „page stop“ function.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

1. Call the „Equipment

configuration“ menu

Equipm. configuration

Function keys

Device connection

--/-

SAT settings

red

Language:

further

English

696+05A1-GB

return

picture

Help

The left-hand side of this menu shows the currently

valid programming of the function keys.

2. Call the „Function keys“

Functions

Function keys

The window on the right-hand side indicates the sel-

ection that can be programmed.

Television

DVB On/Off

Logo

^TVMuting -12dB

Answer

Pict. format

Speech-music

Sound effects

Stereo/ch. 1-2

Muting -12dB

Infotext

Sound effects

Large letters

blue

--/-

The individual functions are explained in detail in

the „Glossary“ on page 50.

Infotext

Subtitles

Large subtitles

VTR-Operation

6 0 0 + 0 5 M - G B

return

picture

Help

Two functions can be programmed for function key B.

The upper line indicates the function programmed for

TV mode, the lower line the function programmed for

Hi Text mode.

3. Press the function key to be

programmed (in this exam-

ple: B key)

Functions

Function keys

Television

DVB On/Off

Logo

^TVMuting -12dB

Answer

Pict. format

Speech-music

Sound effects

Stereo/ch. 1-2

Muting -12dB

Infotext

Press the

key to switch between the two lines.

Sound effects

Large letters

--/-

Press the B key to display the currently programmed

function.

Infotext

Subtitles

Large subtitles

VTR-Operation

6 0 0 + 0 5 N - G B

Assigning the

function keys

5. Equipment configuration

Press this key on the remote

control....

The screen displays

Explanation

return

picture

Help

Select the function in the right-hand field with the

soon as the cursor (a white bar) is moved.

4. Select the function for TV

mode (in this example

„Subtitles“)

key. The text on the left-hand side changes as

Functions

Television

DVB On/Off

Logo

Pict. format

Speech-music

Sound effects

Stereo/ch. 1-2

Muting -12dB

Infotext

Function keys

^TVMuting -12dB

Answer

If the function „Subtitles“ has been programmed for

key B, the subtitles will be displayed when the TV set

is switched, if subtitles are actually transmitted with

the programme.

Subtitles

Large letters

--/-

Infotext

Subtitles

Large subtitles

VTR-Operation

store ?

6 0 0 + 0 5 O - G B

return

picture

Help

The cursor (a white bar) is now located in the second

line, on the currently programmed function.

5. Switch to Hi Text mode and

program the function keys

Functions

Videotext

no function

Infotext

Function keys

The desired Hi Text functions can now be programmed in

the sequence described in steps 3 and 4, above.

^TVMuting -12dB

Answer

Sound effects

Large letters

Stop page

--/-

Infotext

store ?

6 0 0 + 0 5 P - G B

return

picture

Help

6. Store the assignments and

return to the „Equipment

Configuration“ menu

Equipm. configuration

Function keys

Device connection

--/-

SAT settings

Language:

further

English

696+05A1-GB

7. Return to TV picture

Settings for

programme change

5. Equipment configuration

Press this key on the remote

control....

The screen displays

Explanation

return

picture

Help

The various TV stations transmit the sound at different

volumes. Some stations, for example, are always louder

than others, and some stations increase the volume

during the commercials.

1. Call the „Equipment

configuration“ menu

Equipm. configuration

Prog. change settings

If volume adaptation is active, these volume variations

are smoothed out.

Volume adaptation On

--/-

red

The setting selected here applies to all programme

positions.

600+05B-GB

return

picture

Help

In this menu you can define the sound functions for a

2. Call the settings for

programme change

programme change.

Prog. change settings

In the first line of the menu, use the

keys to select

whether the mute function is to be retained („Yes“) or

to be cancelled („No“) when you change programmes.

No sound on PC :

Spat. sound on PC :

Stereo wide on PC :

PC time out

Yes

Off

blue

--/-

The new settings can be stored by pressing the

key.

store ?

696+05C-GB

return

picture

Help

Use the

keys in this menu line to define whether

3. Set spatial sound when

changing programmes

the spatial sound is to be switched on or off when the

programme is changed to a monaural station.

Prog. change settings

No sound on PC :

Spat. sound on PC :

Stereo wide on PC :

PC time out

Yes

Off

When in mono mode, you can change over to spatial

sound by pressing a self-defined function key (sound

effects).

yellow

--/-

white

If no other values are to be changed, then press the

key to store the new setting.

The term „spatial sound“ is explained in the section

„Glossary“ on page 50.

store ?

696+05D-GB

return

picture

Help

The programme change „time out“ can be set to On or

Off.

4. Set the PC „time out“

Prog. change settings

On = the programme position changes three seconds

green

after input of the first digit.

No sound on PC :

Spat. sound on PC :

Stereo wide on PC :

PC time out:

Yes

Off

Off = after input of the first digit, further digits must

be entered or the

key must be pressed to

--/-

change the programme position.

Select the setting On or Off with the

keys.

5. Store the settings and

return to the TV picture

Store the new settings with the

key

696+05T-GB

6. Volume adjustment and forced mono

It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme

positions are identical. To overcome this problem, you can set a volume correction factor for each programme position.

Example:

Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as

Programme 3. Switch over to programme position 1.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

In this submenu, you can assign a volume correction

factor to a programme position and, if necessary,

1. Call the sound submenu

and adjust the volume

TV station table

Programme

activate forced mono sound mode.

Pict. Sound

Std

A volume correction factor can be set with the

when the text is displayed on a blue background.

keys

LOGIC

ARD

Auto.

—

white

red

ZDF

Press the key to enter a positive correction factor

which is added to the standard volume value (increa-

sing the volume). Press the ^-key to enter a negative

correction factor which is subtracted from the

standard volume value (decreasing the volume).

SAT 1

Volume adjustment

Forced mono

+00

Auto.

Off

Auto.

yellow

<< weitere Einstellungen

Logo, Channel, Signal

In our example:

696+06A-GB

store ?

Press the key and increase the volume until it is the

same as the volume on Programme 3. The resulting

correction factor could , for example, be displayed as 05.

return

picture

Help

It may happen that the TV set inadvertently switches

from mono to stereo during a transmission,

although no stereo programme is being received.

This usually depends upon the prevailing reception

conditions.

2. Set forced mono

TV station table

Programme

Pict. Sound

Std

LOGIC

ARD

Auto.

—

yellow

ZDF

Use the

keys to select forced mono.

SAT 1

Auto.

+00

Volume adjustment

Forced mono

If this setting is stored, all transmissions received in

this programme position will always be reproduced in

mono.

Auto.

Off

Auto.

<< weitere Einstellungen

Logo, Channel, Signal

696+06B-GB

store ?

All changed settings are stored.

3. Store the setting and return

to TV picture

6.1 Correcting picture deviations

It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on

the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme

position and/or to select a picture correction function (CTI, noise reduction).

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

The picture menu contains all settings which can

change the picture.

1. Call the first picture menu in

the station table and correct

the picture sharpness

TV station table

Programme

The picture sharpness can be adjusted separately for

each station in the station table. This setting overrides

the standard setting.

Pict. Sound

Std

white

red

VTR1

ARD

ZDF

Auto.

—

The new value can be saved by pressing the

key.

SAT 1

Auto.

Sharpness

Noise reduction

CTI

Auto.

The value set in this manner remains stored even if the

TV is switched off with the main power switch.

Auto.

blue

Auto.

further

<< weitere Einstellungen

store ?

Logo, Channel, Signal

600+06C-GB

This TV set is equipped with a special noise-reduction

function for use where the picture contains „snow“ or

is unclear. The noise reduction function can be set to

return

picture

Help

TV station table

2. Switch on the noise

reduction

Pict. Sound

Std

A1: automatic motion compensation, slight noise

Programme

reduction

VTR1

ARD

ZDF

Auto.

—

A2: automatic motion compensation, high noise

SAT 1

reduction,

yellow

Auto.

Sharpness

Noise reduction

CTI

Auto.

A3: no motion compensation, slight noise reduction),

Auto.

or OFF.

further

<< weitere Einstellungen

store ?

Logo, Channel, Signal

600+06D-GB

return

picture

Help

CTI stands for Colour Transient Improvement and

improves the transitions between different coloured

areas of the picture, making the picture appear much

sharper. The CTI function is effective for both trans-

missions received by way of the aerial input and for

signals received via the AV sockets. CTI also provides

a visible improvement when playing back from a video

recorder.

However, in certain applications (such as playing back

from an S-VHS video recorder), the CTI function may

just have the opposite effect.

When playing back from such recorders, CTI can result

in a lower-quality picture. For this reason, this menu

permits you to switch off the CTI function for specific

programme positions.

3. Switch on the CTI function

TV station table

Programme

Pict. Sound

Std

VTR1

ARD

ZDF

Auto.

—

white

SAT 1

Auto.

Sharpness

Noise reduction

CTI

Auto.

further

<< weitere Einstellungen

store ?

Logo, Channel, Signal

600+06E-GB

return

picture

Help

4. Call the second picture

menu and adjust the

chrominance

In this second picture menu, the chrominance, colour

offset and contrast can be corrected individually for

each programme position.

TV station table

Std

Pict. Sound

Programme

LOGIC

ARD

Auto.

—

red

In our example, the chrominance of Programme 1 is to

be diminished. Hold down the ^-key until the colour

intensity is the same as in programme position 3.

ZDF

SAT 1

Chrom. adjustm.

Col. offset adj.

Contrast adj.

Picture format

VCR

4:3

Off

The chrominance adjustment range is -15 to +15.

If no other values are to be changed, then press the

<< weitere Einstellungen

Logo, Channel, Signal

store ?

key to store the new setting.

696+06G-GB

6.1 Correcting picture deviations

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

Normally, it is not necessary to adjust the colour offset.

5. Adjust the colour offset

or contrast

However, if external units are connected it is possible that

colour and black-and-white pictures are not accurately

superimposed. A similar effect is sometimes encountered

in journals when the black-and-white and colour

impressions do not register, with the result that the

contours are blurred. The colour offset adjustment has

no effect on an RGB input.

TV station table

Std

Pict. Sound

Programme

LOGIC

ARD

Auto.

—

yellow

ZDF

SAT 1

Chrom. adjustm.

Col. offset adj.

Contrast adj.

Picture format

VCR

4:3

Off

white

The contrast adjustment range is -15 to +15.

<< weitere Einstellungen

Logo, Channel, Signal

If no other values are to be changed, then press the

store ?

696+06H-GB

key to store the new settings.

return

picture

Help

The picture format of a normal TV set is 4:3. If an input

signal in 16:9 format is applied to the EURO socket,

the picture format is changed automatically. If a 16:9

input signal is applied to the phono (cinch) sockets or

the mini-DIN (YC) socket, the picture format must be

changed manually.

6. Change the picture format

TV station table

Programme

Std

Pict. Sound

LOGIC

ARD

Auto.

—

ZDF

SAT 1

green

Chrom. adjustm.

Col. offset adj.

Contrast adj.

Picture format

VCR

An external switching voltage of 4-7 V at the EURO

socket automatically switches the TV to 16:9 format,

provided that the signal type was stored under the

heading „...controls AV operation“ in the menu

„Equipm. configuration, device connection“.

4:3

Off

<< weitere Einstellungen

Logo, Channel, Signal

store ?

696+06I-GB

7. Store all settings and return

to TV picture

Camcorder ➜ video recorder

7. AV recording

In the „AV recording“ menu, you can define which of the connected peripheral AV devices are to be used for copying a recording.

AV device is a generic term for all external video units, such as video recorders, camcorders,video disk players, photo CD players, etc

which can be connected to a TV.

Example: You wish to copy a film recorded with an S-VHS/Hi8 camcorder to an LogicVTR video recorder which is also connected to the

TV set.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

In the „AV recording“ menu , you can select how the

AV devices connected to your TV set (see Section 14,

„Equipment configuration/Connecting external devices“)

are to be used for copying a recording.

1. Call the AV menu

AV-recording

Input

Output

blue Camcorder

Camcorder

Logic VTR

The left side of the menu (Input) shows the devices

which supply picture and sound for the copy operation.

yellow

Logic VTR

Selection of an input for a programme is meaningful

only for SAT or decorder operation.

Pr. 1: RTL 2

The right side of the menu (Output) shows the devices

capable of recording the picture and sound.

no recording

6 0 0 + 0 7 A - G B

A Device connection

return

picture

Help

After calling this menu, you must first select the input

device, i.e. the device which is to supply the picture.

2. Select the desired AV devi-

ces (in this example: Cam-

corder and LogicVTR)

AV-recording

After selection of an input, the menu automatically

returns to the output page, where the AV device for

recording is selected.

Input

Output

blue

Camcorder

LogicVTR

Camcorder

LogicVTR

yellow

Back to the example:

You want to copy the film from the camcorder to Logic

VTR.

blue

Pr: RTL 2

EURO1:

Video

EURO2:

Video

Camcorder ➜ LogicVTR

record ?

Press the blue key to display the signal from the cam-

corder on the screen.

6 0 0 + 0 7 B - G B

A Device connection

The copy operation with the selected devices is now

active.

3. Store the settings and clear

the menu

If any subsequent switching operations could interfere

with copying, a warning box with the text „AV recor-

ding“ will be displayed and the requested switching

operation will not be executed.

To check the progress of the operation, press the

key

4. Terminate or abort the

copy operation

to display the picture from the input device on the screen.

If you wish to execute the copy operation in standby

mode, you can switch the TV set to this mode by pres-

sing the

key.

If this setting is not stored, the programme position must

be selected again in order to display the TV programme.

Video recorder ➜ video recorder

7. AV recording

Example:

You want to play back a film from the logic video recorder connected to the EURO 2 socket and record it on the video recorder 2 connected

to the EURO 1 socket.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

1. Call the AV menu

AV-recording

Input

Output

blue Video Rec.2

Video Rec.2

Logic VTR

yellow

Logic VTR

Pr. 1: RTL 2

no recording

6 0 0 + 0 7 C - G B

A Device connection

return

picture

Help

After calling the menu, you must first select the input

device which is to supply the picture. In our example,

you select Logic VTR by pressing the yellow key.

2. Select the desired AV device

(in this example:

LogicVTR)

AV-recording

Once you have done this, the cursor moves to the out-

put side of the menu and the logic video recorder is

selected automatically, since there is no other choice.

Output

Input

blue

Video Rec.2

LogicVTR

VideoRec.2

LogicVTR

yellow

Pr: RTL 2

EURO1:

Video

EURO2:

Video

Camcorder ➜ LogicVTR

Logic VTR ➜ Videorec.2

record ?

6 0 0 + 0 7 D - G B

A Device connection

The copy operation with the selected devices is now

active.

3. Store the settings and

clear the menu

If any subsequent switching operation could interfere

with copying, a warning box with the text „AV recor-

ding“ will be displayed and the requested switching

operation will not be executed.

To check the progress of the operation, press the

key to display the picture from the input device on the

screen.

If you wish to execute the copy operation in standby

mode, you can switch the TV set to this mode by pres-

sing the

key.

4. Terminate or abort the

copy operation

TV picture

Switch-on/off and

reminder time

8. Time settings

In the „Time settings“ menu, you can enter settings which will instruct the TV to switch itself on or off, and to display a reminder at a given time.

Switching from summer time to winter time and vice versa is carried out automatically by the teletext clock or when the set is

switched from standby mode to programme position 1.

The switch-on time function will automatically turn on the TV at the preset time if the television is in standby mode. The switch-off time

function will automatically switch it off as desired. The reminder service is intended to help you remember things which you have to do

later on, for instance a telephone call. All three settings can be jointly programmed.

Example: The TV is to switch itself on at 20:00 hr, remind you of something at 21:45 hr, and switch itself off at 23.30 hr.

Press this key on the remote

The screen displays

Explanation

control....

The adjoining picture shows the appearance of the

„Time settings“ menu when no times have been pro-

grammed.

return

picture

Help

1. Call the „Time settings“

Time settings

Switch-on time:

Switch-off time:

Reminder time

Time of day:

Off

--/-

-- : --

green

blue

08 : 22

696+08A-GB

return

picture

Help

First press the blue key and then press the or the

key to switch on the function.

2. Enter the switch-on time

(Example: 20.00 hr)

Time settings

Enter the desired switch-on time with the numeric keys.

The function is activated after input of the last digit.

Henceforth the TV set will switch itself on every day at

the preprogrammed time.

When switched on, the TV displays the programme positi-

on which was selected when it was last switched off.

The screen displays On - -.

Switch-on time:

Switch-off time:

Reminder time

Time of day:

20:00

Off

--/-

blue

-- : --

08 : 22

When the set has switched itself on automatically,

you must press any key you choose on the remote

control, otherwise the set will return to standby

mode after about 10 min. This is a safety precaution

to ensure that the television does not stay on if

you are not at home.

696+08B-GB

If you press the yellow key, the text in the second line

is displayed on a yellow background.

return

picture

Help

3. Enter the switch-off time

(Example: 23.30 hr)

Time settings

Now press the or the key to switch on the function.

Switch-on time:

20:00

Enter the desired switch-off time with the numeric

keys. The function is activated after input of the last

digit.

yellow

Switch-off time: 23:30

--/-

Reminder time

Time of day:

-- : --

08 : 22

The switch-on/switch-off times can be deleted with

the

keys (function OFF).

696+08C-GB

2 3

Switch-on/off and

reminder time

8. Time settings

Press this key on the remote

control....

The screen displays

Explanation

return

picture

Help

If you press the white key, the text in the third line is

displayed on a white background.

4. Enter the reminder time

(Example: 21.45 hr)

Time settings

Enter the desired reminder time with the numeric

keys. The function is activated after input of the last

digit.

Switch-on time:

20:00

white

Switch-off time: 23:30

--/-

From the standby mode, the TV set will switch itself on

at 20.00 hr, remind you of the telephone call you wish

to make at 21.45 hr, and switch back to standby mode

at 23.30 hours.

Reminder time

Time of day:

21:45

08 : 22

The reminder time can be deleted with the C key.

696+08D-GB

At the programmed time, a box with the text „Hallo“ is

displayed on the screen if the TV set is switched on.

This box disappears if you press the

key or

switch to a different programme position.

Hallo

return

picture

Help

If you switch to a programme position in which teletext

has been stored, the current time automatically

5. Enter the time manually

(Example: 14.24 hr)

Time settings

appears in this menu .

Switch-on time:

Switch-off time:

Reminder time

Time of day:

Off

To set the clock manually, simply enter the time with

four digits.

green

Off

--/-

-- : --

1 4

696+08E-GB

6. Switch to standby mode

TV picture

Switching on

8.1 Childlock

Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to

five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to

children’s programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified

period of time.

Example:

The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr. Access to all

other programme positions shall be excluded.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

1. Call the „Timer/childlock“

Timer/childlock

Time settings

Childlock

--/-

Timer recording

Basic setting of MVS

green

696+08F-GB

return

picture

Help

The childlock can be switched on and off with the

keys.

2. Call the „Childlock“

submenu and switch on

the childlock

Childlock

If you set the childlock to „ON“, you must also enter a

4-digit personal code number.

Childlock. . . . .

The TV set can now still be switched on, but programmes

will not be shown on the screen. Instead the „Childlock“

menu will be displayed with the cursor on the „Enter

code“ line.

yellow

blue

^P-^e-^rmi-^tt-^ed-^p-^rog-^r-^am-^m-^es:

--/-

- - - -

Enter code . . . . :

Begin viewing . :

End viewing . . . :

The childlock can be turned off again by entering the

4-digit personal code number.

- -

The TV is automatically switched to standby mode after

approx. 10 minutes if it has not been switched off

manually in the meantime.

6 9 6 + 0 8 G 1 - G B

return

picture

Help

A maximum of 5 programme positions can be entered

to which access is permitted.

3. Select and store permitted

programmes

Childlock

These programme positions are entered with the

numeric keys; all entries can be erased with the C key.

yellow

Childlock. . . . .

Back to the example:

Permitted programmes:

01 02 05 -- --

--/-

Enter the programme positions which are to be

accessible. In this example, the programme positions

01, 02 and 05 have been entered.

- - - -

Enter code . . . . :

Begin viewing . :

End viewing . . . :

- -

Before continuing with the next programming steps,

the permitted programme positions entered above

must be stored; otherwise the entries will be lost.

6 9 6 + 0 8 H 1 - G B

store ?

Switching on

8.1 Childlock

Press this key on the remote

control....

The screen displays

Explanation

return

picture

Help

Enter your personal 4-digit code at this point.

4. Enter your personal code

The digits are entered with the numeric keys. The

entered code number is NOT displayed!

Childlock

Childlock. . . . .

Off

Ask your local dealer for help if you have forgotten

your personal code number.

white

Permitted programmes:

01 02 05 -- --

--/-

Enter code . . . . :

Begin viewing . :

End viewing . . . :

- - - -

- -

696+08I-GB

return

picture

Help

Here you can enter the times between which viewing

of the permitted programmes is allowed.

5. Enter the beginning and

end of the viewing period

Childlock

The TV is not automatically switched on at the begin-

ning of this period; it is, however, automatically swit-

ched off at the end of it.

Childlock. . . . .

Off

Permitted programmes:

01 02 05 -- --

--/-

green

1 4 0 0

If no permitted programmes have been entered all TV

transmissions within this period can be viewed.

Enter code . . . . :

- - - -

14 : 00

18 : 00

Begin viewing . :

End viewing . . . :

red

1 8 0 0

696+08J-GB

The childlock is activated when the set is switched off

with the

key or with the ON/OFF key.

6. Activate the childlock

Switching off

8.1 Childlock

return

picture

Help

Entry of the personal code number switches off the

childlock and the selected programme is displayed on

the screen.

Call the TV menu and enter

your personal code

Childlock

Childlock. . . . .

Off

Ask your local dealer for help if you have forgotten

your personal code number.

Permitted programmes:

01 02 05 -- --

--/-

Enter code . . . . :

Begin viewing . :

End viewing . . . :

- - - -

- -

696+08I-GB

8.2 Recording with the timer

The menu "Timer recording" is intended primarily for recording Pay-TV programmes (e.g. Premiere). When using a Metz video recorder

with „Data Logic“ you can also record SAT programmes* with this menu. For this purpose, the video recorder must be connected to the

EURO 2 socket.

*only if a SAT upgrade kit is fitted

8 timers can be programmed up to 2 months in advance.

Example: A VHS video recorder with Data Logic is connected to the EURO 2 socket of the TV, while a Pay-TV decoder (e.g. Premiere) is

connected to the EURO 1 socket. You now wish to record a film running on a Pay TV channel.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

If no timers have been programmed before, the table in

the menu is empty. If you have previously programmed

timer recordings, these will be displayed in the table.

1. Call the „Timer recording“

Timer recording

Time of day

Date

TV / R

VPS

Prog

The current time of day and the current date are nee-

ded for programming in the timer menu. The time is

normally obtained from the Hi Text function and the

date from the VPS signal. Note that some stations do

not transmit VPS signals and/or Hi Text.

-/--

- -

—

green

white

If the time and/or date are not detected automati-

cally, you must enter them manually.

Timer recordings are not possible if the childlock

is switched on.

enter date

6 0 0 + 0 8 K - G B

04.01

14:20

11.12

Imissione data

14:20

The month, the day, the hours and the minutes must

each be entered in the form of two digits, e.g. 01.09

for September 1 and 09:00 for 9 AM.

return

picture

Help

2. Enter the date and time of

the film to be recorded

(see example)

If you make a mistake when entering the date and

time, you can delete the entry in the current column or

the entire line by pressing the C key. The entire line

can be deleted only if the key symbols at the top of the

menu are displayed in colour.

Timer recording

Time of day

Date

TV / R

-/--

VPS

Prog

Premiere

—

22:10

07.01

20:15

—

In the column "VTR", which can be selected only if a

video recorder with "Data Logic" is connected, one of

the following settings can be selected with key A:

—

No timer data are transferred to the video recorder.

The video recorder must be programmed manually.

—

store ?

enter date

04.01

14:20

LV ¹⁾If a "Data Logic" video recorder is connected.

Imissione data

11.12 14:20

6 0 0 + 0 8 L - G B

A "Data Logic" video recorder will not function automati-

cally without "LV" and must be programmed manually.

return

picture

Help

3. Store the programmed data

and return to the TV picture

or standby mode

The recording can be aborted at any time by pres-

sing the keys

and

sequentially, in

Timer recording

this order, or by pressing the C key with the timer

menu displayed.

Time of day

Date

TV / R

VPS

Prog

-/--

Premiere

—

22:10

07.01

20:15

—

This does not apply to video recorders with data

transfer!

—

The same data must also be entered on the AV

programme position of the video recorder or on a

programme position where the video recorder

does not receive a station.

—

enter date

6 0 0 + 0 8 M - G B

04.01

14:20

11.12 14:20

Imissione data

9. Connecting headphones

Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only

accept headphones with a 3.5 mm jack plug.

We recommend the use of headphones with an impedance of at least 32 Ohms. Headphones of a lower impedance (down to approx.8

Ohms) will impair the sound quality.

The headphones volume can be stored as a standard value. The headphones and the TV speakers can be used together.

In the event of 2-channel sound transmissions it is possible to listen to either channel 1 or 2 on the headphones, irrespective of the chan-

nel set for the TV speakers.

Volume

9. Headphones

Press this key on the remote

The screen displays

Explanation

control....

It is advisable to switch off the TV speakers with the

key when adjusting the volume for the headphones.

1. Switch off the TV speakers

and adjust the headphones

volume

Press the yellow key to display the bar for the head-

phones volume.

Adjust the volume with the

keys.

yellow

Volume headphones

change

696+BY GB

return

picture

Help

The standard value for the headphones volume can

only be stored by way of the TV menu.

2. Store the headphones volu-

me as a standard value

Audio standard values

All standard values can be stored in the „Audio stan-

dard values“ submenu.

Volume

Treble

--/-

The volume has already been adjusted (see step 1).

Bass

It is now only necessary to press the

the headphones volume.

key to store

yellow

Balance

Volume headphones

696+04B-GB

store ?

3. Return to TV picture

TV picture

With two-channel sound transmissions it is possible to

select either channel 1 or channel 2.

Sound mode selection for

headphones

If headphones are connected, it is possible to listen,

for example, to the English sound track on the spea-

kers (channel 1) and to the other language on the

headphones (channel 2).

Sound-mode headphones

yellow

Mono / stereo / Chann.1 / Chann.2

B 1 5 - G B

change

This setting can also be called with the sound mute

active by pressing the yellow key. The desired channel

can then be selected with the

keys.

Basic functions

10. Hi Text

Hi Text permits broadcasting stations to improve the display of information and graphics. In the past, there were only eight colours

available; with Hi Text, there are 4096 possibilities.

Furthermore, the introduction of so-called pixel graphics makes it possible to present the information pictorially. The broadcasting stations

are currently in the process of adopting these innovations.

We have implemented Hi Text in your TV set in such a manner that you can switch it on and off as desired. Pressing the -/-- key switches

from Hi Text to Megatext or vice versa.

The currently selected mode („Megatext“ or „Hi Text“) is displayed at the top of each page.

Press this key on the remote

The screen displays

Explanation

control....

Help

TV-picture

View page

The Hi Text file displays all the subjects available on

specific programme position and the chapters belonging

to the currently selected subject.

1. Call Hi Text

TOP

Hi Text

Börse

Wetter

ARD-Programm

Football

The range of subjects and chapters depend on the

transmitting station and can therefore be completely

different in each programme position.

Bundesligen

Hinweise

VT-Redaktion

VT-Zentrale

Fußball

Sport

Aktuelles

Index

Übersicht

Inhalt

Chapter

on subject

For some stations, for example, only numbers, rather

than the header lines, appear in the Hi Text file.

Subj.

6 9 6 + 1 0 A - G B

Each time the blue key is pressed, the next subject is

selected and the corresponding file card is raised. Pro-

longed depression of the blue key raises all of the sub-

jects sequentially.

Help

TV-picture

View page

2. Select a subject

TOP

Hi Text

Börse

Wetter

ARD-Programm

Football

Bundesligen

Fußball

Sport

Aktuelles

Press the right side of the key to step backwards

through the subjects, or the left side of the key to step

forwards.

übermorgen

jetzt im TV

morgen

blue

heute

Inhalt

Chapter

on subject

Übersicht

Subj.

The displayed choice of chapters is adapted to the

currently selected subject.

6 9 6 + 1 0 B - G B

TV-picture

View page

Help

Each time the yellow key is pressed, the next chapter

is selected and the corresponding file card is raised.

3. Select a chapter

TOP

Hi Text

Börse

Wetter

Press the right side of the key to step backwards, or

the left side of the key to step forwards.

ARD-Programm

Football

Bundesligen

Fußball

Sport

Aktuelles

übermorgen

jetzt im TV

morgen

heute

Prolonged depression of the yellow key raises all the

chapters sequentially.

yellow

Inhalt

Übersicht

Subj.

Chapter

on subject

6 9 6 + 1 0 C - G B

The first page of the selected subject and chapter is

displayed.

4. Open the first page

of the chapter

ARD heute . . . . . . . . . . . . . .301-319

ARD morge.n. . . . . . . . . . . . .321-339

ARD-Wochenübersich.t. . . . . . . . 340

TV-Guide: Zeitschema. . . . . . . . . 350

TV-Guide: Spartenschema . . . . . 375

File symbols with arrows in the bottom line indicate

that the corresponding coloured keys will activate sub-

ject-by-subject, chapter-by-chapter or page-by-page

leafing.

ARD: Jetzt

im Programm

. . . . . 333

The blue text window shows the name of the currently

selected subject, while the yellow shows the name of

the currently selected chapter.

Untertitel-

Vorschau

. . . . . 398

ARD

ZDF

TV-Guide

696+10D-D

Inhalt

Basic functions

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

Kartei

Marke:

neu

Hilfe

This function enables you to run through the individual

pages. Just as in a book, you can leaf forwards or

backwards from the displayed page.

301 ARD/ZDF So. 5.01.97 13:45:00

5. Page-by-page paging

ARD

Sonntag, 5. Januar 1997

06.00

09.00

09.03

09.45

10.00

10.03

10.45

11.00

11.03

ARD-Morgenmagazin

Press the right side of the key to step backwards, and

the left side of the key to step forwards.

Tagesschau

Dallas

Tele-Gym

Tagesschau

auslandsjournal

ZDF-Info Gesundheit

Tagesschau

Cappuccino Melange

Fernsehfilm, 1993 . . . . . . .

Umschau

307

313

white

12.35

12.55

13.00

13.05

Presseschau

Tagesschau

ARD-Mittagsmagazin . . . .

bis 13.45 Uhr

Inhalt 300 Nachmittag auf 302

ARD heute

Inhalt

696+10E-D

Kartei

Marke:

neu

Hilfe

This function enables you to run through the individual

chapters.

321 ARD/ZDF So. 5.01.97 14:19:00

6. Chapter-by-chapter paging

ARD

Each time you press the yellow key, the first page of

the next or previous chapter is opened.

Montag, 6. Januar 1997

ARD-Morgenmagazin

05.30

09.00

09.03

09.45

Tagesschau

ML Mona Lisa

Kneippen für die

Gesundheit

Press the right side of the key to step backwards, and

the left side of the key to step forwards.

10.00

10.03

10.45

Tagesschau

Weltspiegel

Fall auf Fall - . . . . . . . . .

Jedem sein Recht

Tagesschau / Börse

Salomonberries

Spielfilm, D 1991

Umschau . . . . . . . . . . . .

Presseschau

326

11.00

11.03

12.35

12.55

13.00

yellow

Tagesschau

Inhalt 300 Nachmittag auf 322

ARD morgen Inhalt

696+10F-D

Kartei

Marke:

neu

Hilfe

Each time you press the blue key, the first page of the

next or previous subject is opened. In most cases, this

will be an index page.

400 ARD/ZDF So. 5.01.97 14:19:00

7. Subject-by-subject paging

W E T T E R

Ü B E R S I C H T

Press the right side of the key to step backwards, and

press the left side of the key to step forwards.

Deutschland

Wettervorhersage

401

402

403

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

blue

Temperaturen international . .

408

Quelle: METEO CONSULT / DWD

Wetter Inhalt

696+10G-D

Multiple pages

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

01 02 03 04 05

Marke:

neu

Multiple pages are indicated by a dark bar with the

subpage numbers on the left-hand side of the display-

ed page.

589 ARD/ZDF So 5.01.97 15:34:00

1. Recognizing multiple pages

1/8

computer

Hallo und herzlich willkommen . . .

The bright numbers indicate the number of subpages

contained in this multiple page. The number of sub-

pages is transmitted by the stations at intervals of 20

seconds. Consequently, it may take some time until all

subpage numbers are displayed.

Auf den folgenden Seiten informieren

wir Sie über unseren Service rund um

das erste regelmäßige Online-Magazin

im deutschen Fernsehen.

Technische Mindestausstattung,

Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9

Vollständige Liste aller

Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9

netNite im Internet

(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9

Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9

netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9

netNite Weiterbildung . . . . . . . . . . . . . 7/9

Nächste Sendung . . . . . . . . . . . . . . . . 8/9

If there are more than 5 subpages, the cursor (white

bar) can be moved to the right with the key to dis-

play the next group of subpage numbers (for example 01

to 11).

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10H-D

Some stations do not provide multiple page identifica-

tion; in this case, the subpages are displayed sequen-

tially. To stop a page for reading, one of the A or B

function keys must be programmed with the „Stop

page“ function in Hi Text mode. Renewed depression

of the „Stop page“ function key advances to another

subpage (the one the station is currently transmitting).

<< 01 02 03 04 05 06 07 08 09 10 11 >>

Use the

keys to move the cursor (coloured bar)

589 ARD/ZDF So 5.01.97 15:40:00

2. Selecting subpages

2/8

upwards and downwards through the page numbers.

The page number highlighted by the cursor can be

called directly with the

computer

Technische Mindestausstattung, Online

Kosten

key.

Computer mit 486 Prozessor

mindestens 8 MB Speicher (16 MB

ideal)

mindestens 500 MB Festplatte

Super VGA-Grafikkarte

mindestens 15" Farb-Monitor

Soundkarte mit Aktivboxen

Zu veranschlagende Kosten:

ca. 1500 - 2000 DM

Surf-Kosten (eine Stunde T-Online)

Telefongebühren (ab 21.00Uhr)

Online-Zeittakt und Internet-

Gebühr . . . . . . . . . . . . . . . . . . . .

1,92 DM

4,20 DM

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10I-D

Page selection by cursor

10. Hi Text

The cursor (coloured bar) can be moved up and down

ARD heute . . . . . . . . . . . . . .301-319

ARD morge.n. . . . . . . . . . . . .321-339

ARD-Wochenübersich.t. . . . . . . . 340

TV-Guide: Zeitschema. . . . . . . . . 350

TV-Guide: Spartenschema . . . . . 375

with the

and

keys. The page number on

which the cursor is located can be called directly by

pressing the

key.

ARD: Jetzt

im Programm

. . . . . 333

Untertitel-

Vorschau

. . . . . 398

ARD

ZDF

TV-Guide

696+10D-D

Inhalt

Direct page selection

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

01 02 03 04 05

Marke:

neu

After depression of the first numeric key, the num-

ber of this key, followed by two hyphens, appears at

the top left of the screen. Enter the complete 3-digit

number. A green line with the text „Wait for page ...“

is displayed at the top of the screen after the last

digit has been entered. A red line with the message

„Page is not transmitted“ is displayed if the entered

page number does not exist. Otherwise the TV searches

for the specified page and displays it as soon as it is

located.

1. Enter the page number

e.g. page 589

589 ARD/ZDF So 5.01.97 15:34:00

1/8

computer

Hallo und herzlich willkommen . . .

Auf den folgenden Seiten informieren

wir Sie über unseren Service rund um

das erste regelmäßige Online-Magazin

im deutschen Fernsehen.

Technische Mindestausstattung,

Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9

Vollständige Liste aller

5 8 9

Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9

netNite im Internet

(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9

Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9

netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9

netNite Weiterbildung . . . . . . . . . . . . . 7/9

Nächste Sendung . . . . . . . . . . . . . . . . 8/9

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10H-D

Return to last index page

10. Hi Text

Press the 0 key to return to the last index page.

Return to last index page

ARD heute . . . . . . . . . . . . . .301-319

ARD morge.n. . . . . . . . . . . . .321-339

ARD-Wochenübersich.t. . . . . . . . 340

TV-Guide: Zeitschema. . . . . . . . . 350

TV-Guide: Spartenschema . . . . . 375

The adjoining picture shows the index page of the ARD

channel as an example.

ARD: Jetzt

im Programm

. . . . . 333

Untertitel-

Vorschau

. . . . . 398

ARD

ZDF

TV-Guide

696+10D-D

Inhalt

Topical or news-flash

pages

10. Hi Text

Kartei

Marke:

neu

Some stations transmit Teletext pages with news flashes,

general information, football results, etc.

Hilfe

111 ARD/ZDF So. 5.12.97 14:19:00

Suppressing news-flash pages

Once you have selected such a page and hidden it by

pressing the

key, the page will be displayed again

white

whenever it is updated by the TV station.

LETZTE MELDUNG: Eurocard bestätigt doppelte

Abbuchungen von Auslandsumsätzen im

November.

Nachrichten - Übersichten .

Wetter Inhalt

121

.112 – 115

696+12A-D

Doubling the font size

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

Kartei

Marke:

neu

Hilfe

When the B* key is pressed for the first time, the upper

part of the selected page is displayed with the font size

doubled.

301 ARD/ZDF So. 5.01.97 13:45:00

1. Select double font size,

e.g. press the B* key

ARD

Sonntag, 5. Januar 1997

06.00

09.00

09.03

09.45

10.00

10.03

10.45

11.00

11.03

ARD-Morgenmagazin

You can scroll slowly through the page by holding

down the key.

Tagesschau

Dallas

Tele-Gym

Tagesschau

auslandsjournal

ZDF-Info Gesundheit

Tagesschau

* The B key was programmed in the factory for this

function, but this programming can be changed (see

Section „Equipment configuration - Assigning the

function keys“).

Cappuccino Melange

Fernsehfilm, 1993 . . . . . . .

Umschau

307

313

12.35

12.55

13.00

13.05

Presseschau

Tagesschau

ARD-Mittagsmagazin . . . .

bis 13.45 Uhr

Inhalt 300 Nachmittag auf 302

ARD heute

Inhalt

696+10E-D

When the B* key is pressed for the second time, the

displayed page is scrolled upwards.

Kartei

Marke:

neu

Hilfe

2. Scroll the page upwards,

e.g. press the B* key

301 ARD/ZDF So. 5.01.97 13:45:00

ARD

Sonntag, 5. Januar 1997

ARD-Morgenmagazin

06.00

09.00

09.03

09.45

10.00

10.03

Tagesschau

Dallas

Tele-Gym

Tagesschau

auslandsjournal

When the B* key is pressed for the third time, the dis-

played page is scrolled further, and so on.

3. Scroll the page further,

e.g. press the B* key

Sonntag, 5. Januar 1997

06.00

09.00

09.03

09.45

10.00

10.03

10.45

11.00

11.03

ARD-Morgenmagazin

Tagesschau

Dallas

Tele-Gym

Tagesschau

auslandsjournal

ZDF-Info Gesundheit

Tagesschau

Cappuccino Melange

Fernsehfilm, 1993 . . . . . . .

Umschau

307

12.35

12.55

13.00

Presseschau

Tagesschau

4. Return to normal font size

10.00

10.03

10.45

11.00

11.03

Tagesschau

Press the B* key for a fifth time to return to normal font

size.

auslandsjournal

ZDF-Info Gesundheit

Tagesschau

Cappuccino Melange

Fernsehfilm, 1993 . . . . . . .

Umschau

307

313

12.35

12.55

13.00

13.05

Presseschau

Tagesschau

ARD-Mittagsmagazin . . . .

bis 13.45 Uhr

Inhalt 300 Nachmittag auf 302

ARD heute

Inhalt

* Depending on the assignment of the

function keys. The factory setting is B.

Setting marks

10. Hi Text

There will be certain Hi Text pages, e.g. stock market, news, weather forecast, etc., that you willl want to read repeatedly. We have pro-

grammed a way of making it easier to read such pages: Hi Text pages can be flagged with the aid of marks (similar to tabs in a file).

We provide a total of 100 marks. Up to 10 marks may be assigned to each programme position, as long as the total number of

marks assigned does not exceed 100.

You can set the marks on any desired pages and you can delete them again when they are no longer needed. If marks are set on a page,

you can page from one to another by pressing the green key when HiText is active.

Press this key on the remote

The screen displays

Explanation

control....

Kartei

Marke:

neu

Hilfe

1. Call the desired page

e.g. page 400

400 ARD/ZDF So. 5.01.97 14:19:00

W E T T E R

Ü B E R S I C H T

Deutschland

Wettervorhersage

401

402

403

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

0 0

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

Temperaturen international . .

408

Quelle: METEO CONSULT / DWD

Wetter Inhalt

696+10G-D

Kartei

Marke:

entf.

Hilfe

If marks have not yet been set in this programme

position, then press the key to set the 1st mark.

MARKE 1 400 ARD/ZDF So. 5.01.97 14:19:00

2. Set the first mark

W E T T E R

„MARK 1“ is displayed at the top lefthand corner of the

screen.

Ü B E R S I C H T

Deutschland

Wettervorhersage

401

red

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

402

403

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

Temperaturen international . .

408

Quelle: METEO CONSULT / DWD

Wetter

Inhalt

696+10J-D

01 02 03 04 05

Marke:

entf.

In the ARD channel, for example, page 589 is a multiple

page.

3. Select the next page

e.g. 589

MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00

1/8

computer

On multiple pages, marks are always set on the main

page.

Hallo und herzlich willkommen . . .

Auf den folgenden Seiten informieren

wir Sie über unseren Service rund um

das erste regelmäßige Online-Magazin

im deutschen Fernsehen.

Technische Mindestausstattung,

Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9

Vollständige Liste aller

Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9

netNite im Internet

(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9

Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9

netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9

netNite Weiterbildung . . . . . . . . . . . . . 7/9

Nächste Sendung . . . . . . . . . . . . . . . . 8/9

8 9

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10K-D

Setting marks

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

01 02 03 04 05

Marke:

entf.

When the required page is displayed (in our example

page 589), press the red key again to set the second

mark.

MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00

4. Set the second mark

1/8

computer

Hallo und herzlich willkommen . . .

Auf den folgenden Seiten informieren

wir Sie über unseren Service rund um

das erste regelmäßige Online-Magazin

im deutschen Fernsehen.

„MARK 2“ is now displayed at the top left-hand corner

of the screen.

red

Technische Mindestausstattung,

Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9

Vollständige Liste aller

Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9

netNite im Internet

(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9

Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9

netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9

netNite Weiterbildung . . . . . . . . . . . . . 7/9

Nächste Sendung . . . . . . . . . . . . . . . . 8/9

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10K-D

Kartei

Marke:

entf.

Hilfe

10 marks can be set on each programme position, as

long as the total number of marks assigned does not

exceed 100. See steps 1 - 4.

If all of the 100 available marks have been used,

the red dot in the title line of the menu changes to

grey.

5. Set further marks

e.g. page 500

MARKE 3 500 ARD/ZDF So. 5.01.97 13:47:00

SERVICE

. . . . . . . . . . . . . . . . . . .

Kultur

501/502

530

. . . .

Ratgeber: ARD/ZDF-Infos

. . . . . . . .

Lotto/Gewinnzahlen

540

. . . . . . . . . . . . .

Reise/Verkehr

halbstarl!! - Jugendprogramm

. . . . . . .

550

570

Videotext-Preisrätsel

. . . . . . . . . . . . . . . .

575-577

580

Computer

red

A la carte . . . . . . . . . . . . . . . .

Weltzeituhr . . . . . . . . . . . . . . .

590

599

Service

696+10M-D

Inhalt

6. Return to TV picture

Infotext (Mark by mark paging)

10. Hi Text

The basic idea of Infotext is that you can quickly retrieve and read pages which have previously been marked as described on the two pre-

vious pages of this manual. Once marks have been set, you can page through the related pages at any time by pressing a programmed

function key

Once the marks have been set, you can step through all of the marked pages from the current TV programme by pressing a programmed

key (key C is programmed in the factory for this purpose).

Press this key on the remote

The screen displays

Explanation

control....

Kartei

Marke:

neu

Hilfe

After the C key has been pressed, a panel with „Mark

1“ will be displayed.

1. From TV picture to

the first mark

400 ARD/ZDF So. 5.01.97 14:19:00

W E T T E R

On programme positions without a mark, a white field

will be displayed with the text „No mark“.

Ü B E R S I C H T

Deutschland

Wettervorhersage

401

402

403

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

Temperaturen international . .

408

Quelle: METEO CONSULT / DWD

Wetter

Inhalt

696+10G-D

01 02 03 04 05

Marke:

entf.

Each time the green key is pressed, you advance to

the next mark. In this manner you can run through all

pages on which marks are set.

2. Step forward to the

next mark

MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00

1/8

computer

Hallo und herzlich willkommen . . .

Auf den folgenden Seiten informieren

wir Sie über unseren Service rund um

das erste regelmäßige Online-Magazin

im deutschen Fernsehen.

Technische Mindestausstattung,

Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9

Vollständige Liste aller

Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9

netNite im Internet

(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9

Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9

netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9

netNite Weiterbildung . . . . . . . . . . . . . 7/9

Nächste Sendung . . . . . . . . . . . . . . . . 8/9

green

ZDF: netNite

Service

das Online - Magazin >>

Computer

696+10K-D

The C key will return you to the TV picture after having

run through all marks.

3. Return to TV picture

Press the

key to return directly to the TV picture

without having to page through all the marks.

* Depending on how the function keys are programmed.

The factory setting is C.

Erasing marks

10. Hi Text

Press this key on the remote

control....

The screen displays

Explanation

Kartei

Marke:

entf.

Hilfe

Press the C key to call the page where the mark is to

be erased.

1. Call the desired page

e.g. page 400

MARKE 1 400 ARD/ZDF So. 5.01.97 14:19:00

W E T T E R

Ü B E R S I C H T

* Depending on how the function keys are program-

med. The factory setting is C.

Deutschland

Wettervorhersage

401

402

403

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

Temperaturen international . .

408

Quelle: METEO CONSULT / DWD

Wetter

Inhalt

696+10J-D

Kartei

Marke:

neu

Hilfe

Erasure of the mark on the current text page changes

the sequence of the remaining marks.

400 ARD/ZDF So. 5.01.97 14:19:00

2. Erase the mark

W E T T E R

Example:

Ü B E R S I C H T

3 marks have been set in the current programme position:

- Mark 1 on text page 400

Deutschland

Wettervorhersage

401

402

403

Früh- bzw. Mittagstemperaturen

Aussichten für die nächsten Tage

red

- Mark 2 on text page 500

Europäisches Reisewetter

Nord- und Nordwesteuropa

Mittel- und Südosteuropa

Süd- und Südwesteuropa

Wassertemperaturen

404

405

406

407

- Mark 3 on text page 589

Temperaturen international . .

408

You now erase the mark 1 on text page 400.

Quelle: METEO CONSULT / DWD

Wetter Inhalt

The sequence of the remaining marks is immediately

re-arranged and is now:

696+10G-D

- Mark 1 on text page 500

- Mark 2 on text page 589

3. Return to TV picture

Subtitles

10. Hi Text

This TV enables you to display programme subtitles automatically.

For this purpose one of the three A, B or C function keys must be programmed on the remote control handset. Please refer to Section

„Equipment configuration - Assigning the function keys“ for programming. The subtitles will only be displayed automatically after a

function key has been programmed accordingly.

Example: You wish to watch the news with its subtitles. Program a function key with the „Subtitle“ function.

Press this key on the remote

The screen displays

Explanation

control....

The teletext transmitted by the station is superim-

posed on the picture at the bottom of the screen.

1. Display of subtitles in the

current programme

The subtitle function can be activated or deactivated

with the A*, B* or C* function key.

automatic

In Ballungsgebieten sind solche Bilder selten

2. Blank out the subtitles*

The subtitle function can be switched off and on again

with the correspondingly programmed function key.

Note: If the subtitle function is programmed for

one of the function keys, it will automati-

cally be activated when the TV set is

switched on.

* Depending on the assignment of the function keys

Riddle solutions key

10. Hi Text

Hi Text contains riddles with hidden answers.

Access to riddle solutions

The solutions to these riddles can be displayed with

the A*, B* or C* function key.

* Depending on the assignment of the function keys.

11. Special picture effects

Variable Zoom

All programmes that are not transmitted in the traditional 4:3 screen format, such as cinema films in Cinemascope or Super-Cinemascope or

16:9 format, have black bars at the top and bottom of the screen.

With the zoom function, you can increase the size of the picture and make the black bars disappear. Although this also causes part of the

picture to move off the screen at each side, the resulting loss of information is slight and less disturbing than the black bars.

Press this key on the remote

The screen displays

Explanation

control....

Press the

button until the black bars at the

1. Switch on the zoom function

and enlarge the picture

top and bottom of the screen have disappeared.

The entire picture is enlarged uniformly.

The selected enlargement factor is automatically

stored for this programme position as long as the

TV set is not switched off. Switching to another

station will restore the picture to its normal size.

If you return to the station for which you activa-

ted the zoom function, the picture will be auto-

matically enlarged if the same programme is

still running.

^ZoomĲ

2. Call the zoom function for

the current programme

position

If you wish to use the selected enlargement also

for other programmes, press the

key again

after setting the zoom factor with the

key.

This returns the picture to its normal size, but

stores the current enlargement factor for subse-

quent use.

If the TV set has been switched off with the

remote control or the main switch, the stored

enlargement factor can be recalled by pressing

Zoom

the

key twice.

3. Switch off the zoom function

^ZoomĲ

Still picture

11. Special picture effects

Press this key on the remote

control....

The screen displays

Explanation

The current frame is „frozen“ on the screen

when you press the II key. The TV programme (or

the video film) continues to run in the backgro-

und.

1. Activate the still picture

function

2. Deactivate the still picture

function

Pressing the II key again switches back to the

current programme (or video film).

12. Operation without remote control

This mode is only intended for an emergency when the battery in

the remote control handset is flat, or if the remote control is not

available.

Programme selection:

Press the - + keys.

The TV controls are underneath a cover at the front of the set.

Volume:

You can control the following functions on the TV without the

remote control handset. The function remains preselected for 10

seconds.

Hold down the preselect key F until the bar display for the volu-

me appears on the screen. Now press the - + keys to adjust the

volume.

Contrast:

Hold down the preselect key F until the bar display for contrast

appears on the screen. Then press the - + keys to adjust the

contrast.

13. Remote control handset for video recorders

Some of the basic functions of Metz video recorders can be controlled with the remote control unit. Point the remote control handset

towards the video recorder when using it.

In order to permit control of a video recorder, function key B for the TV level must be programmed to „VTR operation“ in

the menu „Equipment configuration/Assigning the function keys“ on the TV set.

Whenever a key is pressed, an indicator on the remote control unit blinks.

Nota:

• Video recorder On/OFF

• Programme position selection

Do not point the remote control

unit into your eyes and press a

key on it !

RB11

100 Hz

VTR

Do not use rechargeable batte-

ries in the remote control unit.

•

On video recorders with the data

transfer facility, immediate recording

of the programme currently displayed

on the screen

1) Press the keys B and

together.

2) Press the keys B and

together.

/VTR

/TV-REC

• Video recorder timer ON/OFF

• Next programme

-/--

•

REW (rewind)

From STOP: fast rewind

From PLAY: picture search reverse

TIMER

•

FF (fast forward)

From STOP: fast forward

From PLAY: picture search forward

• Stop

• Next programme

•

Stop - Terminates playback or recording

•

Play - Start playback

•

Slow-motion playback

• Still - Pause

Operator help for video rec. operation

•

Index - Video index search forward

• Index - Video index search reverse

Switch to AV mode AV 1, AV 2, ...

REC - Start recording

REC

•

To switch the remote control to video

recorder mode:

Press and hold this key and press

the desired function key.

•

In order to permit control of a video

recorder, function key B for the TV level

must be programmed to „VTR operation“

in the menu „Equipment configu-

ration/Assigning the function keys“

on the TV set.

PRG.

Batteries:

Insert the enclosed batteries in the remote

control, observing the symbols on the

cover of the battery compartment.

Remove exhausted batteries from the

remote control and return them to your

dealer or to an authorised battery collection

point.

Camcorder

Videorecorder

14. Connecting peripheral equipment

Video recorders can be connected to the TV set via the antenna socket or one of the EURO sockets. We recommend that you use one of

the EURO (Scart) sockets for this purpose, since only the EURO sockets have separate inputs and outputs for picture

and sound signals.

Camcorders

can be connected to the TV set with special cables (available from your dealer). The following connection diagram applies

in principle to all of our products, although the various sockets may be located in different positions on different units.

TV set, rear view

Cinch-Scart cable for VHS-Scart or S-VHS-Scart connection

e.g. hama no. 42387 or hama no .42394

Euro or Scart cable

Camcorder (video camera)

Video recorder, rear view

Connecting external

devices

14. Connecting peripheral equipment

In the menu „Device connection“, you can define which AV devices are connected to the various sockets on the TV set. The box „Devices“

contains a list of common AV devices. Only certain devices can be connected to the FRONT sockets.

Wherever possible, the AV devices should be connected to specific EURO sockets, namely:

EURO 1: VHS PC, games console ( e.g.Nintendo, photo CD, SAT receiver, Pay-TV decoder, DVD, S-VHS playback unit.

EURO 2: S-VHS/Hi8 video recorder, S-VHS/Hi8 video recorder + Pay-TV decoder, VHS video recorder, SAT receiver, SVHS/Hi8-videorecorder+Pay-TV-

Decoder, SAT-receiver.

The connections are pre-programmed in the factory as shown in the picture for step 1.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

In the „Device connection“ menu, you can assign one

of the defined AV devices to each of the EURO sockets.

The abbreviations in the box on the right have the

following meanings:

Video rec. = video recorder (up to 2 may be connected).

Video rec. 1 is the video recorder which is always

connected; Video rec. 2 is used for copying from one

recorder to another.

Logic VTR = video recorder with data transfer to/from

the TV set(e.g. DataLogic, QLink, EasyLink, Megalogic)

1. Call the „Device

connection“ menu

Devices

Device connection

no device

Video Rec. 1

Video Rec. 2

LogicVTR

LogicVTR+D

VTR+DEC(1)

VTR+DEC(2)

Camcorder

Mixer

blue

EURO1: Video

Decoder A

yellow

EURO2: Video

LogicVTR

--/-

red

Decoder A

Decoder B

DVD

Photo CD

SAT/SetTop

Games

VTR+Dec. = video recorder and Pay-TV decoder (e.g.

Premiere), where the decoder is connected only to the

video recorder.

yellow

REC

Signal type

selection

6 0 0 + 1 4 A - G B

Camcorder = video camera

Decoder = Pay-TV decoder (e-g- Premiere)

SAT = external satellite receiver

Game = games console

The default settings can be modified to meet your own

requirements. You should, however, note the following

input and output signal allocations when doing this.

return

picture

Help

2. Change the device

connections

Devices

Device connection

no device

Video Rec. 1

Video Rec. 2

LogicVTR

LogicVTR+D

VTR+DEC(1)

VTR+DEC(2)

Camcorder

Mixer

blue

EURO1: Video

S-VHS / Hi8

(= Y/C =S-Video)

VHS

(= Video)

Camcorder

RGB

blue

yellow

white

green

yellow

EURO2: Video

LogicVTR

--/-

Input

Yes

Output

Yes

Input

Output

Yes

Input

Yes

EURO 1

EURO 2

Yes

Decoder A

Decoder B

DVD

Photo CD

SAT/SetTop

Games

To change the settings, select the appropriate EURO

socket with the coloured keys and then select the

device to be connected with the

Signal type

selection

6 0 0 + 1 4 B - G B

and

keys.

return

picture

Help

When the devices are selected, the signal type is

always set to „video“. Pressing the red key displays a

box for selection of the signal type.

3. Change the signal type

Sign. type

Video Rec. 2

controls AV

operation

Device connection

blue

EURO1: Video

Camcorder

Differences between the signal types:

• continuous AV operation: the screen displays the

picture provided by the AV device. The channel setting

of the TV set has no effect.

red

yellow

EURO2: Video

LogicVTR

--/-

continuous

AV operation

• . . . controls AV operation: if the AV device is set to

„play“, the screen displays the picture provided by the

AV device; if the AV device is set to „stop“, the screen

displays the picture of the selected TV programme

position.

Video

YC in

Device

selection

6 0 0 + 1 4 C - G B

4. Store the settings and

return to TV picture

TV picture

Video recorders

14. Connecting peripheral equipment

Connecting a video recorder via the aerial socket

• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.

• Load a recorded video cassette in the video recorder.

• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard

channels Ch 30 to Ch 40 (see operating instructions of the video recorder).

• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.

• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section

3. Presetting TV stations.

• In order to ensure optimum picture quality at all times, select the option „VCR 1“. To do so, proceed as described below.

Press this key on the remote

The screen displays

Explanation

control....

The picture quality of a video film can be impro-

ved in a terrestrial programme position with a

standard channel.

1. Select the station table and

call the picture submenu

return

picture

Help

TV station table

white

red

The video signal for this programme position

must be set to „Aerial“.

Pict. Sound

Std

Programme

VTR1

ARD

ZDF

Auto.

—

SAT 1

blue

Auto.

Sharpness

Noise reduction

CTI

Auto.

further

<< weitere Einstellungen

Logo, Channel, Signal

600+06C1-GB

To ensure optimum picture quality the „VCR“

function must be switched on.

return

picture

Help

2. Call the second picture sub-

menu and adjust VCR

TV station table

Set the „VCR“ function to „1“ with the

and press the

programme position.

keys

red

key to store the setting in the

Std

Pict. Sound

Programme

LOGIC

ARD

Auto.

—

Press the

key to return to the TV picture.

ZDF

SAT 1

Chrom. adjustm.

Col. offset adj.

Contrast adj.

Picture format

VCR

4:3

If setting 1 does not result in a satisfactory picture

quality, you can switch to setting 2.

<< weitere Einstellungen

Logo, Channel, Signal

600+06J-GB

Video recorders

Video signal

14. Connecting peripheral equipment

In the following example, logic video recorder 1 is to be connected to the EURO 1 socket.

Example: Connect video recorder 1 to the EURO 1 socket.

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

Select any desired programme position (in this

example: position 25).

1. Select any desired program-

me position and call the

station table

TV station table

Channel

Signal

Prog.

Logo

PRO7

RTL2

VOX

DSF

Aerial

EUSPO

DISCO

MTV

MDR

CNN

>> further settings

Pict., Sound, Std.,

696+11D-GB

white

return

picture

Help

The video signal is normally supplied directly by the

aerial.

2. Call the submenu

„Video signal“

TV station table

Prog.

Logo

Channel

Signal

PRO7

RTL2

VOX

Aerial

DSF

EUSPO

Aerial

PREMI

46 Antenne

EURO1: Video Rec. 2

DISCO

12 Antenne

42 Antenne

53 Antenne

61 Antenne

white

MTV

EURO2: LogicVTR

MDR

CNN

>> weitere Einstellungen

Pict., Sound, Std.

600+14G-GB

return

picture

Help

In order to display the picture from the video cassette

on the screen, the video signal must be set to

„EURO1“.

3. Select the video signal

EURO 1: „Video Rec.1“

TV station table

Prog.

Logo

Channel

Signal

In the case of a connection via a EURO cable, you

should also set the function „VCR“ to „1“ (see also

page 45).

PRO7

RTL2

VOX

Aerial

DSF

yellow

EUSPO

Aerial

PREMI

46 Antenne

EURO1: Video Rec. 1

DISCO

12 Antenne

42 Antenne

53 Antenne

61 Antenne

MTV

EURO2: LogicVTR

MDR

CNN

>> weitere Einstellungen

Pict., Sound, Std.

600+14H-GB

4. Store the setting and return

to the TV picture

TV picture

Pay-TV decoder

14. Connecting peripheral equipment

This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the

TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned.

If you want to record Pay-TV programmes with a video recorder, we recommend that you connect the Pay-TV decoder directly to the video

recorder. If this is not possible, the Pay-TV decoder can be connected to the EURO 1 or EURO 2 socket (see also „Connecting external

devices“ on page 44).

The following diagram shows two different connections of a Premiere decoder Typ G2

Pay-TV decoder

Video signal

14. Connecting peripheral equipment

For the following explanation it is assumed that the Pay-TV decoder A (Premiere) is connected to the EURO 1 socket.

The following settings must be made on the TV set:

Press this key on the remote

The screen displays

Explanation

control....

return

picture

Help

Connect the decoder as shown in the figure on page 47

Call the Device connection menu on the TV set (see

page 44):

Assign the connection configuration, such as Decoder

A“ or „VTR+DEC (1)“, depending on how the decoder

is connected, to one of the EURO sockets.

1. Select the Pay-TV program-

me position and call the

station table

Station table

Channel

Signal

Prog.

Logo

PRO7

RTL2

VOX

Aerial

DSF

EUSPO

PREMI

DISCO

MTV

white

MDR

CNN

red

>> further settings

Std., Pict., Sound

6 9 8 - 1 1 A - G B

return

picture

The video signal is normally supplied directly from the

aerial.

2. Call the submenu „Signal“

TV station table

Prog.

Logo

Channel

Signal

PRO7

RTL2

VOX

Aerial

DSF

Aerial

EUSPO

Aerial

white

Aerial direct

EURO1: Decoder A

EURO2: LogicVTR

PREMI

46 Antenne

DISCO

12 Antenne

MTV

42 Antenne

MDR

CNN

53 Antenne

61 Antenne

>> weitere Einstellungen

Pict., Sound, Std.

600+14D-GB

return

picture

A Pay-TV signal must always be unscrambled in a

decoder before it can be displayed on the screen.

3. Select video signal „via

decoder“

TV station table

You can switch between „Aerial direct“ and „Aerial via

Prog.

Logo

Channel

Signal

decoder“ with the aid of the

keys.

PRO7

RTL2

VOX

Aerial

DSF

EUSPO

Aerial via decoder A

PREMI

46 Antenne

EURO1: Decoder A

DISCO 12 Antenne

MTV

42 Antenne

EURO2: LogicVTR

MDR 53 Antenne

CNN 61 Antenne

>> weitere Einstellungen

Pict., Sig, Std,

store ?

600+14D1-GB

4. Store the setting and return

to TV picture

15. Technical data

Power consumption:

15.1 Upgrade kits

For satellite reception without an additional receiver.

Mains voltage: 230 V AC 50/60 Hz

• SAT upgrade kit 081 NB 1010

• SAT upgrade kit 083 NB 1018

Music power output to DIN 45324

A SAT receiver. Can also receive uncoded ADR (Astra Digital

Radio) transmissions.

Power consumption

(to CENELEC/TC 59 X):

at 4 Ohms and 1 kHz

(sine output)

• DVB-S upgrade kit 020 NG 101A

For reception of analog and digital TV and radio satellite stati-

ons, including Astra Digital (ADR), without additional receiver.

2 x 12 W

(2 x 8 W)

Linea

115 W env.

110 W env.

Ask your dealer for additional upgrade kits.

Morea

Crystal

Tiros

2 x 12 W

(2 x 18 W)

Ibiza

Power consumption/h

Linea

Morea

Crystal

Tiros

115 Wh

110 Wh

Ibiza

Standby (all sets):

ca. 1.5 W

Aerial input:

Channel coverage:

75 Ohms, asymmetric DIN 45325

Standard channels 2...12, 21...69

Special channels S1...S20, S21...S41

S42...S46 (Belgian OIR channels)

Guarantee

When you purchase the television, ensure that your dealer inclu-

des the completed TV „passport“. It must specify the date, the

dealer’s stamp and signature.

Keep this document in a safe place, together with the invoice. Any

claims under the warranty will only be accepted if these docu-

ments are submitted. Keep your TV clean and handle it with care.

16. Glossary

2-channel sound transmission:

Function keys - Teletext

Separate reproduction of 2 sound channels, e.g. 2 different languages.

• No function

Audio

No function has been assigned to this key.

• Answer or Riddle solutions

Display of the hidden answers to riddles

Latin for „I hear“ - The sound frequency range audible to the

human ear is between 60 to 20,000 Hz approx.

Camcorder

• Large font

A video camera with integrated video recorder.

Cinch (phono)

Doubles the font size in teletext.

• Stop page

Running through multiple pages consisting of more than 15 sub-

pages is automatic. This can be stopped at any page with the

„Stop page“ key so that „leafing“ can be continued manually.

Single-pole plug connector for separate audio and/or video

copying.

Data Logic

Until now, your TV set and your video recorder were two separa-

te and independent devices. With the new "Data Logic", we have

created a dialogue system with which the TV set and the video

recorder can exchange data.

Noise reduction

Can be switched on to enhance the picture quality.

OSD (On Screen Display)

Decoder

Convenient display of all functions to adjust the television. They

are superimposed on the current programme.

An electronic circuit that decodes TV signals; required to receive

coded TV transmissions, such as Premiere.

Dual-Band LNC

An LNC that can simultaneously process two transponder fre-

quency ranges (11 GHz and 12 Ghz)

Phono (cinch)

Single-pole plug connector for separate audio and/or video copying.

FBAS = CVBS

RGB control

C = composite, V = video, B = blanking, S = signal

Function keys - Television:

R = red, G = green, B = blue. Indicates separate colour signal

processing.

• No function

No function has been assigned to this key.

• Logo

Spatial sound

Mono transmissions can be reproduced with an artificial stereo effect.

The display of the station logo is meaningful only if a PIP up-

grade kit has been installed.

• Picture format (variable zoom)

Standard channels

02-12 and 21-69 can be received by way of the aerial and cable system.

Standby mode

Changes from 4:3 to 16:9 in the presence of a switching voltage.

The TV has been switched off with the remote control, or it has

switched itself off.

• Speech - music

The treble and bass boost settings are reduced in the position

„Speech“.

• Sound effects

Activates or de-activates spatial sound or base width.

• Stereo/Sound 1-2

Switches to mono when a stereo programme is being received.

To select channel 1 or 2 for two-language transmissions.

• Muting -12 dB

Stereo wide

For stereo broadcasts, the distance between the speakers can

be increased artifically to achieve a wider stereo effect.

Timer

Used to program automatic recording, or to switch a video recorder

or TV automatically on and off at a preset time.

Reduces the sound volume by 12 dB.

• Infotext

Switches from the TV picture to the user defined marks 1, 2, etc.

• Subtitles

Displays the subtitle with corresponding transmissions.

• Large subtitles

100% enlarged subtitles are displayed with corresponding

programmes.

17. Data Logic

What is Data Logic?

1. Connecting a Data Logic video recorder to your TV set

Until now, your TV set and your video recorder were two separate

and independent devices.

Connect the AV-1 socket of the video recorder to the Euro-2 socket

of your TV set, using a fully connected Scart cable.

With the new "Data Logic", we have created a dialogue system

with which the TV set and the video recorder can exchange data.

Data Logic will work only if there is a connection from

the AV-1 socket to the Euro-2 socket.

Video recorders with Data Logic offer the following functions:

• Switch on the video recorder.

2. Setting the TV set for Data Logic

•

Automatic transfer of station information for terrestrial or cable reception.

• Direct TV recording:

• Select programme position 0 on the TV set.

the video recorder records the programme currently displayed

on the TV screen, regardless of whether this comes from a terre-

strial antenna, a cable system or a satellite.

The TV set has been programmed in the factory for video recorder

operation on programme position 0.

In order to check this, press the white key to display the station table with

programme position 0 selected. The picture signal for this programme

• Direct control of recording:

with the menu "AV recording" or "Timer recording".

position must be set to "EURO2: LogicVTR" or "EURO2: LogicVTR+D"

• Status messages (such as "Timer recording started") are sent

from the video recorder to the TV set and displayed there. (Not

available on VC Series)

TV station table

Chan./Freq

Prog

Logo

Signal

• Automatic switching to the AV programme position

(Not available on VC Series).

LOGIC

ARD

ZDF

LogicVTR+D

Aerial

• Automatic power-off of the video recorder if the TV set is swit-

ched to standby mode. (Not available on VC Series)

If the picture signal is set otherwise, you must set it to EURO 2

"LogicVTR" or "LogicVTR+D" in the menu "Device connection"

(see Page 44 of the Operating Instructions.

Video recorders of the Metz VC series, in combination with a Metz

TV set with SAT facility, offer you the tremendous advantage of

problemfree recording of SAT programmes.

Devices

Device connection

no device

EURO1: Video

Decoder A

Video Rec. 1

Video Rec. 2

LogicVTR

LogicVTR+D

VTR+DEC(1)

VTR+DEC(2)

EURO2: Video

LogicVTR

--/-

for terrestrial or

cable reception only !

Automatic transfer of station information

The automatic transfer of station information saves you the tedious procedure of programming the tuner in your video recorder.

After transfer of the information, timer recordings can also be programmed with the video recorder.

Press this key on the

The screen displays:

Explanation

remote control:

return

picture

Help Select video programme position (factory setting:

Pr. 0) on the TV set!

1. Call the menu "Station set-

tings" on the TV set

Station settings

Station table ➜ VTR

Station table

This menu item can be selected only if there is a fully

connected Scart cable between TV and VTR.

Autostore

--/-

If no stations have been set on the video recorder, the TV

station table can be transferred to the video recorder.

SAT programming

white

green

To transfer the station information:

• Switch on the video recorder.

• Select the menu item "Station table ➜ VTR".

Station table ➜ VTR

start ?

6 o o + 0 3 B 2 - G B

•

Confirm this selection by pressing

- the main

menu of the video recorder appears in the background.

2. Close the menu and set the

date and time on the video

recorder.

• After transfer of the station information, a blue menu

of the video recorder appears in the background.

• Close the menu "Station settings" by pressing

•

Set and save the date and time on the video recorder.

18. Index

Picture sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 20

Access to riddle solution (Hi Text). . . . . . . . . . . . . . . . . . . . 39

Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Allocating a station logo . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Audio standard values . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Autostore function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

AV equipment, connecting. . . . . . . . . . . . . . . . . . . . . . 43 - 48

AV recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Premiere decoder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Presetting stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Riddle solutions key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Setting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Sorting stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sound channels1/2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Sound mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 14, 16

Spatial sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 50

Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Station closedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Station search (see also Autostore). . . . . . . . . . . . . . . . . . . 10

Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 50

Still picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 40

Stop page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Summer time/winter time. . . . . . . . . . . . . . . . . . . . . . . . . . 24

Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Switch ON/OFF time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

Bass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

Brightness, luminance . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

Camcorder, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Channel entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Chrominance, colour intensity . . . . . . . . . . . . . . . . . 14, 15,20

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting peripheral equipment . . . . . . . . . . . . . . . . 43 - 48

Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Colour standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Copying (programme positions) . . . . . . . . . . . . . . . . . . . . . 11

CTI function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Teletext (see Hi Text) . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 38

Thunderstorms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Transmission standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Treble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

TV menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7

Data Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Decoder, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . 47 - 48

Deleting programme positions . . . . . . . . . . . . . . . . . . . . . . 11

Direct page selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Entering the time manually. . . . . . . . . . . . . . . . . . . . . . . . . 27

Erasing marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Upgrade kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

FBAS (CVBS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Forced mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Function keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 50

Variable zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Video camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Video recorder, connecting. . . . . . . . . . . . . . . . . . . . . . . . . 43

Video standard values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

Volume adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Headphones, sound channel selection . . . . . . . . . . . . . . . . 29

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Hi Text (Teletext). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 38

Subject to changes as a result of technical advances. Errors

and omissions excepted.

Infotext (Mark by mark paging). . . . . . . . . . . . . . . . . . . . . . 37

Language selection (for TV menu) . . . . . . . . . . . . . . . . . . . . 5

Logo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Mark-by-mark advance . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Moving stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Multiple pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Operator help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Page selection by cursor . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Peripheral equipment . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 48

Picture format (video recorder) . . . . . . . . . . . . . . . . . . . . . . 21

Picture settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting and care of the set

Cleaning the set

Repairs

Always switch off the TV with the ON/OFF key before

you clean it!

The TV should only be opened and repaired by qualified

service personnel!

Cleaning notes for glossy surfaces

Cleaning:

CAUTION! DANGER!

- Clean with a soft, antistatic cloth or

- with a damp cloth and a mild detergent.

Polishing:

Consult your dealer when repairs are necessary.

If there is a technical fault in your TV set, the complete lamp

assembly must be replaced by a trained technician!

- Polish with a soft cloth and furniture polish.

- Minor scratches can be removed with car polish (type for as-

new paintwork without abrasives).

The TV set may be opened and repaired only by a trained techni-

cian.

Any unauthorized attempts to open or repair the TV may result in

the guarantee becoming null and void.

Adequate shielding is provided against X-ray radiation (see

approval certificate on the rear panel of the TV).

Changing the high voltage or fitting a different type of picture tube

may cause an increased amount of X-ray radiation. Televisions

modified in such a manner are no longer in keeping with this

approval certificate and must not be used!

TV. VIDEO. AUDIO. MECABLITZ

Videorecorder

Camcorder

Quality – A matter of principle.

With the trend-setting Metz technology you will

allways make the correct choice.

DVD

See your Metz dealer.

He will be happy to demonstrate the current

Metz range.

Audio

Metz-Werke GmbH & Co KG

Postfach 1267, D-90506 Zirndorf

Internet: www.metz.de

mecablitz

E-Mail:

[email protected]

Availability and technical details

subject to change without notice.

ķ 699 47 2039.A1

Metz. Always first class.

Pioneer DEH20UB User Manual
Philips 220X1 User Manual
Pentax Camera Flash 60 R User Manual
Panasonic Blu ray Player DMP BD79 User Manual
Panasonic AJ HPX3100G User Manual
Nikon 2137 User Manual
Nikon 7X50IF SP WP User Manual
NEC MultiSync LCD1860NX User Manual
MAGPiX B 1380 B1380 User Manual
Kenwood KDC HD548U User Manual