Lanzar Car Audio Car Stereo System SD82 User Manual

SD82  
Instruction Manual  
Fully Compatible to the Formats  
of Files Such as DVD, VCD,  
JPEG, MP4, MP3, MWA, CD.  
2 IN 1 CAR AUDIO SYSTEM WITH  
DVD.VCD.JPEG.MP4.MP3.WMA.CD DISC PLAYER  
AND AM/FM STEREO DIGITAL TUNING RADIO  
Remark: Any information subject to change without further notice  
WWW. LANZAR. COM  
1. Before Operation  
1.1 Glossary  
7. Specification  
General Specification  
Power Requirement.............................................................DC 12V  
Maximum Power Output...................4 x 80W(measured at DC 14.4 V)  
Dimensions(w x h x d)............................................178 x 50 x 165mm  
PBC (playback control)  
It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0  
format used for the playback control. For the discs contained PBC, It  
can playback interactive software with the menu displayed on TV. And  
if the disc contain still images, it can playback high definition of still  
image.  
DVD Deck Specification  
Format....................................DVD/VCD/JPEG/MP4/MP3/MWA/CD  
Video System............................................PAL/PAL 60/NTSC/AUTO  
Audio System..............................................................24 bit/96KHz  
Loading System.......................................................... Auto Loading  
Mounting Angle.................................................................0 to +/-30  
Title  
Generally, the title is the important part of DVD disc. for example, the  
theme part of movie is title 1, the part described how to make movie  
is title 2, the cast is title 3, etc. Every title contain a serial number  
that is easy to lookup.  
Video Specification  
Video System...............................................................16:9 and 4:3  
Video Output level.................................................1.0Vp-p 75 ohms  
Horizontal Resolution................................................................500  
Chapter  
A title can be divided into several blocks, so that every block can be  
operated as a unit, the unit is called chapter. The chapter contain a  
unit at least.  
Audio Specification  
Maximum Output.......................................................1Vrms(+/-3dB)  
Frequency Response.....................................................20 to 20KHz  
S/N Ratio(A-vtd)......................................................................60dB  
Separation..............................................................................50dB  
Track  
It is the biggest component of VCD. Generally, every song of karaoke  
disc is a track.  
Radio Specification  
FM Section  
Frequency range..............................................87.5MHz - 107.9MHz  
Usable sensitivity......................................................................3uV  
I.F Frequency....................................................................10.7MHz  
AM Section  
1.2 Precautions and Maintenance  
1. If the car interior is extremely hot, as after being parked in the sun, do  
not use the player until the car has been driven for a while to cool off  
the interior.  
Frequency..........................................................530KHz - 1710KHz  
2. The protective case is to safely keep the front panel.  
PROTECTIVE CASE  
FRONTPANEL  
3. The unit is designed for negative terminal of the battery which is  
connected to the vehicle metal. Please confirm it before installation.  
4. Do not allow the speaker wires to be shorted together when the unit is  
switched on. Otherwise it may overload or burn out the power amplifier.  
5. Do not install the detachable panel before connecting the wire.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby Laboratories.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.3 Maintenance and Cleaning of Discs  
Disc Maintenance  
6. Trouble Shooting  
Symptom  
1. To keep the disc clean, handle the disc by its edge, do not touch the disc  
surface of the play side.  
2. Do not stick paper or tape on the disc. If there is glue (or analog) on the  
disc surface, must wipe it up before using.  
Cause  
Solution  
3. Do not expose the disc to direct sunlight, or nearby heat sources such as  
caliduct, or leave it in a car parked in direct sunlight where there can be a  
considerable rise in temperature.  
Power does not  
turn on  
IR Remote not  
functioning.  
Check the IR remote  
For a good battery.  
4. Put the disc inside disc case to keep temperature after finishing playback.  
Disc Cleaning  
1. Before playing, wipe the disc with a clean lint. wipe the disc outwards from  
the disc center.  
2. Do not use petrel, thinner, commercially cleaner or anti-static spray used to  
plastic LP to wipe disc.  
DVD Disc does  
not insert.  
Another disc is  
Already in unit.  
Eject first DVD disc  
And insert another  
into unit.  
+
side up  
B
The disc is ejected  
as soon as it is  
inserted.  
The disc has  
been inserted  
Upside down.  
Insert the disc with  
the label side up.  
A
Fig.1  
Fig.2  
Fig.3  
1.4 Battery Information of Remote Control  
Replace Battery in Remote Control:  
1.Before using the remote control for the first time, pull the insulating  
sheet out of the remote control as the direction indicated by the  
arrow.(see fig.1)  
2.Press the movable block hold as the direction indicated by the A arrow  
(See fig.2), then pull the battery holder out of the remote control as  
the direction indicated by the B arrow(see fig.2).  
3.Replace the old battery by a new battery with (+) polarity side upward.  
(See fig.3).  
Sound skips or  
noisy.  
Disc is dirty.  
Clean the disc with  
A soft cloth.  
Replace the disc  
with no scratches.  
Disc is seriously  
scratched or  
warped.  
4.Insert the battery holder to the original position in remote control.  
(See fig.3).  
Note about the Battery of Remote Control:  
1.Improper use of battery may cause overheating or explosion. so that  
Result in injury or fire .  
2.Battery leakage may cause damage to the remote control(Battery  
Life: 6 months with normal use in normal room temperature).  
3.Do not short the battery.  
Sound is bad  
after power is  
turned on.  
Condensation may  
have formed on the  
Internal lens when  
The car is parked in  
a humid place.  
Let dry for about  
one hour with the  
power turned on.  
4.Do not throw the battery into the fire.  
5.To avoid the risk of accident, keep the battery out of reach of children.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.5 Remote Control Description  
3
31  
39  
1
5.21 Region Code  
1. MODE BUTTON  
POWER  
LOC  
SETUP  
Q: Not begin to playback but to display REGION ERROR after inserting disc into  
disc compartment. Why ?  
A: Because the DVD player and disc has respective region code. If the region codes  
of them are not match with each other, the DVD player can not play the disc.  
2. SEL BUTTON  
OSD  
MODE  
MENU  
BAND  
4
14  
MUTE  
9
3. POWER BUTTON  
EQ  
32  
36  
2
37  
ENTER  
4. JOG UP/SEEK UP BUTTON  
5. F.FWD/NEXT BUTTON  
6. JOG RIGHT BUTTON  
7. F.BWD/PREV. BUTTON  
8. JOG DN/SEEK DN BUTTON  
9. MENU/BAND BUTTON  
10. PLAY/PAUSE BUTTON  
SEL  
6
8
38  
CLK  
+
1
5
7
STOP  
PLAY  
PAUSE  
13  
35  
34  
Appendix: The region code of DVD:  
10  
11  
12  
The Motion Picture Association of Amereca (MPAA) divided the world into 6  
regions, and named every region a code, namely region code. The region codes and  
the countries or areas represented by the region codes are as follows:  
2
6
4
8
3
7
5
RETURN  
Region 1: America, Canada, East-Pacific Inlands;  
P/N  
SEARCH  
ST  
9
0
STEP  
A/P  
33  
30  
16  
15  
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;  
Region 3: South-east Asian countries include Taiwan, Hong Kong, South Corea,  
Thailand, indonesia, etc.;  
Region 4: Australia, New Zealand, Central South America, South Pacific Inlands;  
Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North  
Corea, North Africa, North-west Asia etc.;  
SLOW_FWD  
LOUD  
11. NUMBER/PRESET  
MEMORY BUTTONS  
12. P/N BUTTON  
29  
28  
27  
18  
17  
RANDOM  
AUDIO  
PROGRAM  
INT  
TITLE  
CLEAR  
SUBTITLE  
A-B  
13. CLOCK BUTTON  
26  
25  
19  
20  
REPEAT  
ZOOM  
ANGLE  
Region 6: China mainland.  
14. MUTE BUTTON  
PBC  
24  
23  
21  
22  
Basically, when a DVD movie disc for the version of region 6 was decided not to  
issue, we need to purchase another DVD player that can play the DVD movie disc  
for the version of non-region 6. In order to view this disc, viewer who does not have  
the non-region 6 DVD player facilities will have to spend extra sum of money to buy  
it. The problems caused from the area code inconsistency between the disc and the  
DVD player has pushed for the production of Unlock-Version DVD player facilities,  
and some DVD disc sets allow user to modify the area codes for a limited number of  
times. But note that only the discs produced by the 8 biggest filmmaking companies  
of America restrict so, they are not one of original DVD format. That is to say, the  
DVD movie discs not produced by the 8 biggest filmmaking companies of America  
were not restricted by the rule of region code. Generally, they are called  
FreeRegionCode discs or Full Region discs. The 8 biggest filmmaking companies of  
America are as follows:  
15. STEREO/MONO and SEARCH BUTTON  
29. LOUDNESS BUTTON  
30. SLOW FORWARD BUTTON  
31. OSD and LOC/DX BUTTON  
32. EQ BUTTON  
16. A/P and STEP BUTTON  
17. PROGRAM BUTTON  
18. TITLE BUTTON  
19. SUBTITLE BUTTON  
20. PBC BUTTON  
33. RETURN BUTTON  
34. STOP BUTTON  
21. CLEAR BUTTON  
22. ANGLE BUTTON  
23. ZOOM BUTTON  
24. AUDIO BUTTON  
25. REPEAT BUTTON  
26. A-B BUTTON  
35. VOLUME- BUTTON  
36. JOG LEFT BUTTON  
37. ENTER BUTTON  
1. WarnerBros;  
2. Colmbia;  
3. 20thCenturyFOX;  
4. Paramount;  
38. VOLUME+ BUTTON  
39. SETUP BUTTON  
5. Universal;  
6. UA(UnitedArtist);  
7. MGM(MetroDogwynMayer);  
8. WaltDisney  
27. RANDOM BUTTON  
28. INT BUTTON  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
5.20 Parental Control  
1.6 Description of Face of Front Panel  
Q:After inserting DVD disc into disc compartment, it will appear a dialogue window  
that ask me input a password of 4 digit. Why ?  
A:This is because that the disc movie you are playing was rated with the Parental  
Control, and the current rating level of DVD player is lower than one of current  
disc. You must input right password and enter it to entry Parental Control setup  
menu and then set a equal or higher rating level than one of current disc. So that  
you can playback the disc.  
!
NOTE  
* If you have not changed the password, the factory preset password for the DVD  
player will be empty. So that you should input a desired password and input it  
again to verify it to enter the Parental Control setup menu.  
* For the rating level setup of Parental Control of the DVD player, please refer to  
the relative content of LOCK setup menu for details.  
Accessories: Parental Control  
1. OPEN BUTTON  
2. LCD SCREEN  
10. CLOCK BUTTON  
The Parental Control function of a DVD player can control the playback of movie  
rated level in a disc. Can set the DVD player(include software player in PC) to be a  
certain rating level with SETUP MENU on TV screen.If the rating level set in the  
disc is higher than one set in the DVD player, the DVD player can not playback the  
disc. Sometimes the Parental Control sequences in some discs are different from  
each other. The rating level setup can be protected by the password. Therein, if you  
select Unlock item, the Parental Control function will be invalid, the content of disc  
will be played totally.  
11. MUTE BUTTON  
3. IR REMOTE SENSOR  
4. BAND BUTTON  
5. UP/DN BUTTONS  
6. PLAY/PAUSE BUTTON  
7. MODE BUTTON  
8. P-EQ BUTTON  
12. PRESET STATION AND RPT/RDM BUTTONS  
13. POWER BUTTON  
14. SOUND MODE BUTTON AND VOL KNOB  
15. LO/DX BUTTON  
The disc movie can be designed as that the DVD player will playback the different  
version of content of a same movie according to the different rating level set by  
Parental Control. Depend on the DVD feature of seamless switching described above,  
the scenes that are not fitting for children will be cleared or replaced by the other  
fitting scene automatically.  
16. LOUD BUTTON  
17. USB SOCKET  
9. APS BUTTON  
18. MMC/SD SOCKET  
All rating levels of Parental Control are as follows:  
Unlock  
1
2
3
4
5
6
7
8
Kid Safe  
G
PG  
PG 13  
PG R  
R
NC 17  
Adult  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.7 Description of Unit Chassis Face  
D. Preference Page  
EJ  
Audio  
Subtitle  
Disc Menu  
Parental  
Angle Mark  
Default  
1
2
3
1.LED indicator: Flashing when detachable panel is removed.  
2.RESET button: Press it to rehabilitate the distorted program  
to zero.  
3. EJECT button: press it to eject disc from disc compartment.  
When the disc can not be eject out of the compartment,  
press MODE button to change into RADIO mode and then  
press EJECT button to eject the disc from compartment.  
AUDIO  
This item is for selecting an audio language.  
SUBTITLE  
This item is for selecting a subtitle language or turn off the subtitle  
language.  
1.8 Description of Rear Cabinet Socket  
DISC MENU  
This item is for selecting a disc menu language.  
1
PARENTAL  
The item is for setting a new rating level of the Parental Control(See  
page 26).  
Note: if you want to set a new rating level of the Parental Control, must  
input the password 137988.  
Before the other persons see the Manual, you should get the  
password in mind and cut out the PASSWORD in the Manual.  
ANGLE MARK  
3
4
5
2
This item is for turning on/off ANGLE MARK mode. When turning on the  
ANGLE MARK mode, during playback of the DVD disc, if you press the  
ANGLE button , you can view the picture in different angle.  
1,2. Video Output (2 RCA jacks)  
Use a video cable to connect the video output signal to the external  
video monitors.  
3. Power and Speakers Wires Socket  
4. Antenna Socket  
DEFAULT  
This item is for making all setup items change back to original status.  
5. Fixing Screw Bolt  
Use the clip end of a Ground Line provided by manufacturer to connect  
the Fixing Screw Bolt, use another end of the Ground Line to connect  
the negative pole of the power source. Otherwise, the video on screen  
maybe flashes.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
DOWNMIX  
1.9 DESCRIPTION OF LCD ON THE FRONT PANEL  
It is for selecting your desired sound effect when there is not central  
speaker and sub-woofer. There are 2 modes: LT/RT, STEREO.  
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose  
the item, so it will output audio signal with vivid theatre effect.  
STEREO: If you choose the item, when outputting audio signal with 5.1  
channels, it will output the left and right channels of signal ; when  
outputting audio signal with 2 channels, it will output the common 2  
channels of stereo signal.  
9
2
5
4
6
DUAL MONO  
It is for selecting a desired audio output mode for the left and right ways  
of signal.  
It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:  
STEREO, L-MONO, R-MONO, MIX- MONO.  
DYNAMIC RANGE  
3
13  
10  
8
12  
11  
1
14  
7
It is for adjusting the linear compression ratio. If you set it to be FULL,  
the Peak-to-Peak value of the audio signal is the minimum; if you set it  
to be OFF, the Peak-to-Peak value is the maximum.  
1. DVD/VCD/CD/MP3 disc indicators.  
2. Loudness indicators.  
C. Video Setup Page  
3. Repeat playback indicators (single or all for DVD/VCD/CD disc, single,  
folder and all for MP3 disc).  
Sha rp ne ss  
Brig htne ss  
4. Title number indicator.  
Co ntra st  
5. Chapter/Track number indicator.  
6. Disc playing time indicator for DVD/VCD, track time indicator for CD/MP3.  
7. Dolby digital indicator.  
8. Disc rotation indicator.  
9. RANDOM indicator.  
SHARPNESS  
It is for adjusting the sharpness of the video output.  
10/14/15. SPECTRUM indicator.  
11. CLASS, ROCK and POP equalizer curves indicators.  
12. STEREO indicator.  
BRIGHTNESS  
It is for adjusting the brightness of the video output.  
13. Local indicator.  
CONTRAST  
It is for adjusting the contrast of the video output.  
14. Playing indicator.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.10 Description of Input/Output Wires  
If your TV set has only NTSC or PAL Type, the screen will blink and become  
colorless when a wrong TV Type is selected. In this case, press the N/P  
button on the Remote Control to switch the right TV Type to match  
the TV color system.  
TV Display  
The setup item is for matching the TV screen size.  
4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When  
playing the pictures with 16:9 size, the left and right parts of the video  
will be cut out, and display in full screen.  
4:3 LB: Choose the item when connecting a TV set with 4:3 screen. When  
playing the pictures with 16:9 size, the top and bottom parts of the TV  
screen will be turned into a black square respectively.  
16:9 WIDE: Choose the item when connecting a TV set with 16:9 wide  
screen.  
ANTENNA SOCKET  
YELLOW  
MEMORY B+  
Fused  
filter box  
10A&3A  
fuses  
WOOFER LINE OUT  
BLACK(GND)  
YELLOW  
RED R  
RED  
IGNITION SWITCH  
MP3 MODE  
RCA LINE OUT  
GRAY  
BLUE AUTO ANT  
WHITE L  
FRONT  
The setup item can switch the MP3 playback mode between Auto and  
Manual.  
WHITE  
FRONT  
WHITE / BLACK  
GREEN  
GRAY / BLACK  
VIOLET  
RIGHT  
SP  
PBC  
LEFT  
SP  
The setup item can switch the defaulted PBC mode between ON and OFF.  
REAR  
REAR  
VIOLET / BLACK  
GREEN / BLACK  
HDCD  
The setup item is for the playback of the high definition CD. There are 3  
modes: Off, 1X, 2X.  
NOTES:  
1. Only speakers with 4 ohms impedance may be used.  
2. Ensure that the blue auto antenna cable does not make contact  
with any ground connection.  
B. Speaker Setup Page  
Downmi x  
Dua l Mo no  
Dyna m ic  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.11 INSTALLATION  
5.19 System Setup Menu Operation  
1. Press SETUP button on the IR remote control to display System  
Settings Main Menu on the TV screen. The System Setting Main Menu  
consist of 4 parts, i.e. 4 sub-menu. From left side to right side, they are  
General Setup Page, Speaker Setup Page, Video Setup Page and  
Preference Page.  
INSTALLATION INSTRUCTIONS  
IT IS AN ANTI-THEFT INSTALLATION WAY. THE CHASSIS WEAR A METAL  
SLIDING HOUSING. PLEASE HAVE THE WIRING CONNECTION OF THE  
POWER SUPPLY, SPEAKERS AND ANTENNA AS FOR THE REQUIREMENT  
OF THE MANUAL, THEN INSTALL THE METAL SLIDING HOUSING INTO THE  
CAR ACCORDING TO THE DIAGRAM.  
TO BOOST UP THE CAPABILITY OF  
ANTI-JAMMING, PLEASE FIX THE  
METAL STRAP ON THE METAL  
CONNECTED TO THE BOTTOM  
BRACKET OF THE CAR.  
SELECT THE PROPER FIXER  
FOR FIXING THE SLIDING  
METAL HOUSING.  
2. Use LEFT/RIGHT button to select one of the above 4 parts. Then press  
ENTER or PLAY/PAUSE button to enter it.  
METAL STRAP  
3. Use LEFT/RIGHT/UP/DOWN button to select a item you want set, then  
press ENTER or PLAY/PAUSE button to conform it.  
UNIT CHASSIS  
4. After finishing setting, continuously press LEFT button to exit to System  
Settings Main Menu.  
PLASTIC TRIM OUT  
FRONT PANEL  
DASH BOARD  
*
During setting up, pressing SETUP button can exit from System Settings  
Menu and resume normal playback.  
SLIDING METAL HOUSING  
TO DRAW THE CHASSIS OUT OF THE  
SLIDING METAL HOUSING, INSERT  
THE LEFT AND RIGHT KEY PLATES  
INTO THE RIGHT POSITION OF THE  
2 SIDES OF THE CHASSIS.  
The 4 parts of the System Settings Main Menu are described as follows:  
TO INSTALL THE FRONT PANEL BACK  
TO THE UNIT CHASSIS, FIRSTLY MAKE  
THE LEFT GUIDE BLOCK HOLE AND THE  
LEFT CYLINDER LINE UP AND THEN  
COMBINE THEM, THEN MAKE THE  
RIGHT GUIDE BLOCK HOLE AND THE  
RIGHT CYLINDER LINE UP AND THEN  
COMBINE THEM, FINALLY FLIP THE  
FRONT PANEL UP TO THE PANEL  
A. General Setup Page  
NOTE  
REMOVE THE DECK TRANSPORT  
SCREWS BEFORE OPERATING IT.  
REMOVE THE SLIDING  
METAL HOUSING  
OSD La ng  
TVTyp e  
HOUSING TILL IT CLIP INTO POSITION.  
TVDisp la y  
MP3 MODE  
PBC  
HDCD  
PRESS RESET BUTTON TO RESUME  
THE DISTORTED PROGRAM WHEN  
THE LCD DISPLAY IMPROPERLY AND  
SOME BUTTONS ARE INVALID.  
RESET BUTTON  
TO REMOVE THE FRONT PANEL  
FROM THE UNIT CHASSIS,  
FIRSTLY PUSH THE FRONT  
PANEL HOLD RIGHTWARDS AND  
THEN PULL THE LEFT SIDE OF  
THE FRONT PANEL OUTWARDS  
OSD Lang  
This item is for selecting the language of the SYSTEM MENU and all  
operating prompt interface displayed during playback.  
TO INSERT DISC INTO COMPARTMENT OR EJECT DISC OR  
REMOVE THE FRONT PANEL FROM THE UNIT CHASSIS,  
PRESS THE OPEN BUTTON TO FLIP DOWN THE FRONT PANEL.  
TV Type  
This product supports output of various TV Type, including PAL, AUTO,  
NTSC and PAL 60.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
2. Common Operation  
3. During JPEG playback, press one of the >/< buttons to change the angle  
of viewing picture that is displaying as follows:  
>: 90 deg cw; <: 90deg ccw  
1. POWER BUTTON  
Under power on mode, press POWER button shortly to turn off the unit but  
the clock still display on LCD. Press power button again to turn on the unit.  
Under power on mode, press POWER button long, it will display SEE-YOU  
on LCD for a while and then fully turn off.  
During JPEG playback, press the STOP or MENU button to stop playing and  
return to the root menu.  
*
*
During JPEG playback, the following buttons are not available: SLOW-FWD,  
SUBTITLE, TITLE, ANGLE, STEP, OSD, RETURN, RDM, PROGRAM, ZOOM,  
AUDIO, CLEAR,PBC, INT and A-B.  
2. MODE BUTTON  
Press the MODE button on the front panel or the remote control to select  
DISC(after inserting a disc), RADIO, USB(after inserting a USB storage),  
CARD(after inserting a SD/MMC card) mode.  
In JPEG mode,the other operations are same as ones in MP3/WMA mode.  
3. AUDIO MODE AND LEVEL BUTTONS(KNOBS)  
Press the SEL button on the front panel or the remote controller to select the  
audio modes such as VOL, BAS, TRE, BAL and FAD, then press + or - button or  
rotate the VOL knob to adjust the level of them.  
5.16 MP4 Operation  
If turn off the controlling power and then turn on it, the level of all audio modes  
will be one of them before turning off the controlling power. If turn off ACC power  
and then turn on it, the level of volume will be the defaulted one, and the other 4  
audio modes will still be one of them before turning off the ACC power .  
Press or hold the + or - button or rotate the VOL knob to directly adjust the  
volume level.  
1. The root menu is displayed on TV when beginning to switch on DISC mode,  
then it will automatically play the first file.  
During playback, press the STOP button to stop playing and return to the  
root menu.  
Hold the SEL button to display the defaulted volume level, then press the + or -  
button or rotate the VOL knob to set a new one.  
4. MUTE BUTTON  
2. When displaying the root menu, press the direction buttons to select your  
desired FOLDER or file, then press the OK or PLAY button to open the  
FOLDER, or play the selected file.  
Press the MUTE button on the front panel or the remote control to eliminate  
the sound immediately and the audio mute indicator on the LCD will be flashed,  
press it again to resume the normal playback.  
When displaying the root menu, you can also use the number buttons to  
select the serial number of the file and play the file.  
5. CLOCK DISPLAY AND ADJUSTMENT BUTTONS  
*
*
The ANGLE, TITLE, PBC, MENU, RETURN, PROGRAM, CLEAR, RDM,  
INT, SUBTITLE buttons are not valid.  
Press the CLK button on the front panel or the remote control to display  
time on LCD.  
Long press the CLK button to flash MINUTE, and then rotate the VOL knob on  
the front panel or press or hold the + or - button on the remote control to  
adjust MINUTE; then press the CLK button to flash HOUR, and then rotate the  
VOL knob on the front panel or press or hold the + or - button to adjust HOUR.  
Finally long press the CLK button to confirm it and exit.  
6. EQ(P-EQ) BUTTON  
The other functions are same as ones in VCD disc.  
5.17 ESP Function  
There is ESP function for all formats of discs.  
Press the EQ button on the remote control or the P-EQ button on the front  
panel to select the preset music equalizer curves: OFF, POP, ROCK, CLAS.  
The sound effect will be changed.  
5.18 USB and MMC/SD Reader Operation  
7. OPEN BUTTON  
Press the OPEN button on the front panel to flip down the front panel from the  
unit, then you can insert the disc into the disc compartment or press the EJECT  
button on the back of the front panel to eject the disc or remove the front panel.  
8. IR REMOTE SENSOR  
Power on the DVD player, then insert the USB storage or MMC/SD Card,  
and then the monitor will display the root menu of the USB storage or MMC  
/SD Card.  
All the operations are same as ones in the disc of the same format file.  
9. LOUDNESS BUTTON  
Press LOUD button to enhance bass level immediately when bass is not enough.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
5.12 Change Audio Language  
3. Radio Operation  
1. In the state of DVD disc playing, press the AUDIO button repeatedly  
on the IR remote control to select the desired language type.  
(depend on the disc used)  
1. PRESET STATION [ 1-6 ] BUTTONS  
A]. To memorize the current frequency, press any one of the six preset  
buttons(1-6) on the front panel or on the remote control hold for more  
than 2 seconds.  
2. In the state of MP3/WMA disc playing, the AUDIO button on the IR  
remote control is not available.  
B]. To recall the preset memory, press one of the preset buttons [1-6].  
2. AS/PS BUTTON  
3. In the state of VCD/CD disc playing, press the AUDIO button repeatedly  
to select LEFT MONO, RIGHT MONO, MIX-MONO and STEREO sound  
mode, no language function.  
A)When shortly pressing the APS button on the front panel or the A/P button on  
the remote control, the radio searches for each preset station stored in the  
current band from the preset station 1. At the time, the name of the band, the  
frequency of the preset station and the name of the number button, will display  
on LCD, and it will display for 5 seconds for every preset station. after searching  
the preset stations for a circle, it will stop searching and listen to the preset  
station 1.  
B)When long pressing the APS or A/P button (more than 1 second), the radio  
searches from the current frequency and checks the signal strength level in the  
current band until 1 cycle searching is finished. And then the 6 stations of the  
strongest signal will preset to the corresponding memory banks of the number  
buttons. When the AS operation is finished, the radio will listen to the preset  
station 1. (For the 3 bands of the FM1/FM2/FM3, the AS operation will be finished  
once a time. It can store 3x6 FM stations and 2x6 AM stations)  
5.13 Changing of Video Signal System  
During playback of DVD/VCD disc, press the P/N button repeatedly to  
change VIDEO SIGNAL SYSTEM mode as follows:  
--> PAL --> PAL 60 --> NTSC-->AUTO -->  
5.14 Look over Sequence Number or Playback Time of Title/Chapter/Track  
1. In the state of DVD disc playing, press the OSD button repeatedly on the  
remote control to display: Title Elapsed, Title Remain, Chapter Elapsed,  
Chapter Remain and Display Off.  
3. BAND BUTTON  
In RADIO mode, press BAND button on the remote control or on the front  
panel to select your desired radio band and word which band is selected will be  
displayed on LCD.  
2. In the state of VCD disc playing, press the OSD button repeatedly on the  
remote control to display: Single Elapsed , Single Remain , Total Elapsed,  
Total Remain and Display Off.  
4. TUNE/SEEK UP/DOWN BUTTONS  
Press ^ or v button on the remote control or >>| or |<< button on the front  
panel to manually tune up or down for your desired station. Press them hold for  
more than 2 seconds to automatically tune up or down for the stronger station.  
3. In the state of CD disc playing, press the OSD button repeatedly on the  
remote control to display: Single Elapsed, Single Remain, Total Elapsed,  
Total Remain.  
5. STEREO/MONO BUTTON  
4. In the state of MP3/WMA disc playing, press the OSD button repeatedly  
on the remote control to display: Filelist Repeat Off, Filelist Repeat On.  
Press ST button on the remote control to select STEREO or MONO sound  
mode for FM band.  
6. LO/DX BUTTON  
5.15 Playback the Picture CD in JPEG Format  
In RADIO mode, when the signal of the distance radio station are very weak  
and the receiving effect is bad during tuning, check whether there is the word  
LOC on LCD or not. If there is the word LOC on LCD, press this button to turn  
off the LOC function, then tune again for the distance radio station; when the  
signal of the local radio station are too strong to lead that the interference to  
the receiving local radio station is very strong during tuning, press this button  
to turn on the LOC function to display the word LOC on LCD, then tune again  
for the local radio station.  
1. The root menu is displayed on TV when beginning to switch on DISC mode.  
2. When displaying the root menu, press the direction buttons to select your  
desired JPEG picture file, then press the OK or PLAY button to display the  
JPEG picture in full screen from the JPEG picture of the selected file.  
When displaying the root menu, you can also use the number buttons to  
select the serial number of the JPEG picture file and display the JPEG  
picture in full screen from the JPEG picture of the selected file.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
2 Use number button to input desired sequence number of title/chapter/  
track with desired sequence.  
3 Use direction button to move cursor onto START item, then press PLAY  
/PAUSE button toplay the programmed tracks in programmed order.  
4 To exit program playback, firstly press PROGRAM button to enter program  
interface again. At the time, the cursor will stay on STOP item, pressing  
ENTER button will move cursor onto EXIT item, then press ENTER or PLAY  
/PAUSE button to exit program playback and resume normal playback.  
* when you input a wrong figure, press CLEAR button to delete it.  
* In the state of MP3/WMA disc playing, the PROGRAM button is invalid.  
5.9 Playback in Different Angle  
1. In the state of VCD/MP3/WMA/CD disc playing, the ANGLE button on the  
IR remote control is not available.  
2. In the state of DVD disc playing, press TITLE button on the IR remote  
controller to display title menu and then root menu on TV screen, or  
press MENU or RETURN button to directly display root menu, then  
select ANGLE FUNCTION item and then press ENTER button on the  
IR remote control to turn into ANGLE function playing mode, then  
press the ANGLE button repeatedly on the IR remote control to view  
in different angle.(This function is only for the DVD discs with ANGLE  
function)  
5.10 Playback in Zoom Mode  
1. Under DVD/VCD/ Data CD mode, during playback, press ZOOM button  
continuously to enlarge a certain area of the images on TV screen with  
these multiples: X2, X3, X4, X1/2, X1/3,X1/4,ZOOM OFF.  
2. Press UP/DOWN/LEFT/RIGHT buttons to select the area you want to  
enlarge(only for DVD).  
5.11 Change Caption Language  
In the state of DVD disc playing, press SUBTITLE button repeatedly to  
select the language of the caption or turn off the caption.(depend on the  
disc used.)  
In the state of VCD/CD/MP3/WMA disc playing, the SUBTITLE button  
is not available.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
use UP or DOWN button to select a desired item, then press ENTER  
button to enter it. Use UP/DOWN/LEFT/RIGHT button to select the  
item for inputting number for title/chapter/ track, then use the number  
buttons to input the corresponding serial number, finally press the  
ENTER button to play.  
4. Basic Disc USB MMC/SD Operation  
4.1 Begin playback  
2. In the state of CD disc playing, press the INT button on the remote  
controller to play the previous 10 seconds part of each track on disc.  
Press PLAY/PAUSE or INT button to resume normal playback (depend  
on the disc used).  
1. Press POWER button to turn on the DVD player.  
After turning on the DVD player, please turn on TV set, and ensure that  
the video output of TV is the video input from the DVD player connected  
with TV set.  
3. In the state of MP3/WMA disc playing, INT button is not available.  
5.6 Playback a selected track/chapter or from a specified time  
? Common Question  
Q: There is not anything is displayed on TV screen when the DVD player  
is turned on:  
A: Ensure that the TV was set to right video input(not TV channel); for  
example, if you make VIDEO1 INPUT of TV and DVD player connected  
with each other, then you need set TV to VIDEO1.  
1. In the state of DVD disc playing, press SEARCH button to enter title/  
chapter SN. search mode or title/chapter time search mode.  
2. Press OPEN button to flip down the front panel.  
2. In the state of VCD/CD disc playing, press SEARCH button to enter  
disc time/track time search mode or track SN. Search mode .  
3. Insert Disc Into Disc Compartment(Label surface up)  
3. In the state of MP3/WMA disc playing, press SEARCH button to enter  
track SN. Search mode or track time search mode.  
4. Push the front panel back to combine with the head unit properly for  
the other operation.  
5.7 Playback in Random  
In the state of DVD/VCD/MP3/WMA/CD disc playing, press the RDM  
button to switch between SHUFFLE ON/OFF.  
! NOTE  
1. For some discs that are seriously scratched or poor manufacturing or  
recording quality, it may not play.  
5.8 Program Playback  
It allows you to enter the order in which you want some chapters/tracks  
in DVD/VCD/CD disc to play.  
2. If the player can not read disc under normal condition, please try to  
eject and reload the disc again.  
1 During playback, press PROGRAM button to enter a program interface  
as follows:  
3. Remark:  
1) In addition to normal CD and DVD, this unit supports to play CD-R,  
CD-R/W, DVD-R and DVD-R/W as well; however, depending on the  
conditions of the recording equipment, recording program or the disc  
itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.  
for DVD disc  
for VCD/CD disc  
Program:TT(n)/CH(- -)  
Program: Track(01-n)  
1
2
3
4
5
TT: CH:  
TT: CH:  
TT: CH:  
TT: CH:  
TT: CH:  
6
7
8
9
TT: CH:  
TT: CH:  
TT: CH:  
TT: CH:  
-
-
-
-
-
-
-
6
7
-
-
-
-
-
-
-
1
2
3
4
5
2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,  
too high recording speed may result in poor signal quality and therefore,  
it is recommendable to select as lower as possible recording speed.  
-
8
-
-
-
9
-
-
10 TT: CH:  
10  
Exit  
START  
STOP  
Exit  
START  
STOP  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
5.4 Playback Repeatedly  
5.4.1 ONE/ALL Repeat  
4.2 Pause Playback  
In the state of DVD/VCD/CD/MP3/WMA disc playing, press the PLAY  
/PAUSE button on IR remote control or the front panel of DVD  
player to pause the playback, press the PLAY/PAUSE button again  
to resume normal playback.  
1. Under mode of DVD disc playback:  
Press the REPEAT button on the IR remote control or the 2RPT button  
on the front panel to select Repeat Chapter, Repeat Title, Repeat All  
or Repeat Off.  
4.3 Stop Playback  
2. Under mode of VCD disc playback:  
Press PBC button on the IR remote control to turn PBC function ON/  
OFF(the defaulted mode is PBC OFF):  
1) When it is in the state of PBC ON, during playing, the REPEAT button  
on the IR remote control or 2RPT button on the front panel are not  
available.  
2) When it is in the state of PBC OFF, during playing, press the REPEAT  
button on the IR remote control or 2RPT button on the front panel to  
select Repeat Track, Repeat All or Repeat Off.  
In the state of DVD/CD disc playing, press the STOP button once on IR  
remote control to stop the playback, then press the PLAY/PAUSE  
button to resume the normal playback; press the STOP button twice to  
full stop the playback, then press the PLAY/PAUSE button to start  
playback from the beginning of disc again.  
In the state of MP3/WMA disc playing, press the STOP button on IR  
remote control to stop the playback. Then press the PLAY/PAUSE  
button to playback from beginning of the track was playing before  
stopping .  
3. Under mode of MP3/WMA/CD disc playback:  
Press the REPEAT button on the IR remote control or the 2RPT button  
on the front panel to select Repeat Track, Repeat All or Repeat Off.  
In the state of VCD disc playing, press PBC button on the IR remote  
controller to turn PBC function ON/OFF:  
1)When it is in PBC on, during playback, press the STOP button once on  
IR remote control to stop the playback, then press the PLAY/PAUSE  
button to resume the normal playback; press the STOP button twice to  
full stop the playback, then press the PLAY/PAUSE button to display  
disc menu.  
5.4.2 A-B Repeat  
Press A-B button if you want to repeat a specific segment on a disc that  
you define:  
2)When it is in PBC off, during playback, press the STOP button once on  
IR remote control to stop the playback, then press the PLAY/PAUSE  
button to resume the normal playback; press the STOP button twice to  
full stop the playback, then press the PLAY/PAUSE button to start  
playback from the beginning of first track.  
1. Press A-B button at a point (A) where you want it to be the start point of  
the repeat segment. Press A-B button again at a point (B) where you want  
it to be the terminal point of the repeat segment. Then it will play the seg-  
ment repeatedly.  
2. To cancel A-B repeat mode and resume normal playback, press A-B button  
for the third time.  
4.4 Select Chapter/Track with NEXT/PREV. or >>| / |<< Buttons  
Press the NEXT/PREV. or the >>| / |<< button during playback to select the  
next or last chapter/track to playback.  
5.5 Playback in Scan Mode  
NOTE: PRESS THE NEXT//PREV. OR >>| / |<< BUTTON MULTIPLE TIMES  
TO ADVANCE MULTIPLE CHAPTERS FORWARD OR BACKWARD.  
1. In the state of DVD/VCD disc playing, press the INT button on the  
remote control to display an optional interface on the monitor:  
For DVD disc:  
For VCD(PBC OFF) disc:  
Select Digest Type  
Select Digest Type  
Title Digest  
4.5 Select Chapter/Track with Number Buttons  
Track Digest  
Chapter Digest  
Title Interval  
1. In the state of VCD disc playing, press PBC button on the IR remote  
controller to turn PBC function ON/OFF:  
Disc Interval  
Track Interval  
Chapter Interval  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1).When it is in the state of PBC ON and display the PBC menu on the TV  
screen if the disc include PBC menu, press one(s) of NUMBER buttons  
to select the track/chapter to playback; During playing, the NUMBER  
buttons are not available.  
2).When it is in the state of PBC OFF, press one(s) of the NUMBER buttons  
to select the chapter/track to playback.  
4.7 Terminate Playback  
1. Press OPEN button to flip down the front panel, then press EJECT button  
to eject disc from disc compartment and then take away the disc.  
2. press the POWER button on the IR remote control or the front panel of the  
DVD player to turn off the DVD player.  
*
To select one track of the 1st-9th tracks to play, should input 0 number  
firstly, then input the serial number.  
NOTE:  
2. In the state of DVD disc playing, during playback, press one(s) of the  
NUMBER buttons to select the chapter/track to playback.  
1) In the state of DVD/VCD disc playing, if the POWER button or the ignition  
is shut off and then turn on the power or the ignition, the DVD player will  
resume play at the exact spot where playback was interrupted.  
2) In the state of CD/MP3/WMA disc playing, if the POWER button or the  
ignition is shut off and then turn on the power or the ignition, the DVD  
player will playback from the beginning of the track played before power off.  
*
To select one track of the 1st-9th tracks to play, should input 0 number  
firstly, then input the serial number.  
3. In the state of CD/MP3/WMA disc playing, press the NUMBER buttons  
to select the chapter/track to playback.  
5. Advanced Disc USB MMC/SD Operation  
4.6 Select Chapter/Track with Root/PBC Menu (If the disc includes the  
root/PBC menu)  
5.1 Playback with Speed  
1. In the state of DVD disc playing  
Press the F.FWE/NEXT or F.BWD/PREV. button long continuously on  
the IR remote control or the >>| or |<< button long continuously on  
the front panel during normal playback to fast play forwards or back-  
wards at the speeds such as 2X, 4X, 8X,16X,32X.  
During speed playback, press PLAY/PAUSE button to resume normal  
playback.  
1) press TITLE button on the IR remote control to play the title and then  
root menu or press MENU button to directly display root menu on the TV  
screen.  
2)Press JOG button on the IR remote control to select your desired chapter  
/track or other icon.  
3) Press ENTER or PLAY/PAUSE button to play the selected chapter/track; or  
to display the sub-menu on the TV screen, then press JOG button to select  
your desired chapter/track or other icon, then press ENTER or PLAY/PAUSE  
button to play the selected chapter/track.  
5.2 Playback with Slow Speed  
Press SLOW FWD button during playback to execute the Slow Forward  
function. With each consecutive press the SLOW FWD button, the play-  
back speed decreases. The speed levels in Slow Forward for each func-  
tion mode as follows:  
DVD/VCD:1/2X, 1/4X, 1/8X, 1/16X, normal.  
CD/MP3/WMA: not available.  
2. In the state of CD disc playing  
The TITLE, PBC, MENU, RETURN, JOG and ENTER buttons are disabled.  
3.In the state of VCD disc playing, press PBC button to turn PBC on or off.  
1) When starting to turn on PBC function, it will play from the beginning of disc  
till it display PBC menu on TV screen if the disc include PBC menu. You also  
can press RETURN button to display PBC menu.  
Then press one(s) of the NUMBER buttons to select track/chapter to play.  
2) When starting to turn off PBC function, it will also play from the beginning  
of disc, but it can not show the PBC menu.  
During slow playback, press PLAY/PAUSE button to resume normal  
playback.  
5.3 Playback with still frame  
4.In the state of MP3/WMA disc playing:  
If the unit is currently running DVD/VCD/SVCD disc, press STEP button to  
enable the unit to enter still frame mode. press STEP button consecutively  
to display the still frame forward step by step. Press PLAY/PAUSE button  
to resume normal playback.  
During playing, the root menu is displayed on TV all the time(and the TITLE  
or MENU button is not available), press the UP/DN button to select your  
desired track, then press the ENTER button to play the selected track.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  

Pelco Camcorder CC3700H 2 User Manual
Panasonic VDR M10PP User Manual
Panasonic PLAMCORDER PV L600 User Manual
Orion Car Audio C463 User Manual
Nikon Camcorder P510 User Manual
NEC CDC TO3 User Manual
Motorola H780 User Manual
Meade 8 x 42 20D CaptureView TM Integrated Binocular and Digital Camera User Manual
Kenwood KDC MP8080U User Manual
Jwin JC CD160 User Manual