LG Electronics HB806TM User Manual

SIMPLE MANUAL  
3D Blu-ray  
Home Theater  
Please read this manual carefully before operating  
your set and retain it for future reference.  
HB806TM (HB806TM, SH86TM-S/ C, SH85TM-W)  
P/NO: MFL67100727  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
1
2011-04-26 �� 9:10:34  
Getting Started  
3
This device is equipped with a portable battery or  
accumulator.  
Safety way to remove the battery or the  
battery from the equipment: Remove the  
old battery or battery pack, follow the steps  
in reverse order than the assembly. To prevent  
contamination of the environment and bring on  
possible threat to human and animal health, the  
old battery or the battery put it in the appropriate  
container at designated collection points. Do  
not dispose of batteries or battery together with  
other waste. It is recommended that you use  
local, free reimbursement systems batteries and  
accumulators. The battery shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
1
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
Notes on Copyrights  
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Rovi. Reverse engineering or  
disassembly is prohibited.  
Important Notice for TV colour  
system  
The colour system of this player differs according to  
currently playing discs.  
For example, when the player plays the disc  
recorded in the NTSC colour system, the image is  
output as an NTSC signal.  
Only the multi system colour TV can receive all  
signals output from the player.  
If you have a PAL colour system TV, you will see  
just distorted images when using discs or video  
contents recorded in NTSC.  
y
The multi system colour TV changes the colour  
system automatically according to input signals.  
In case that the colour system is not changed  
automatically, turn it off and then on to see  
normal images on screen.  
y
Even if the disc recorded in NTSC colour system  
are well displayed on your TV, these may not be  
recorded correctly on your recorder.  
y
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
3
2011-04-26 �� 9:10:34  
4
Getting Started  
Supplied Accesorries  
Network Software  
Update  
1
Network update notification  
Video cable (1)  
Remote control (1)  
FM antenna (1)  
Speaker cables (6)  
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to a  
broadband home network. If there is new software  
available and the unit is connected to a broadband  
home network, the player will inform you about the  
update as follows.  
Battery (1)  
Option 1:  
1. The update menu will appear on the screen  
when you turn on the player.  
2. Use A/Dto select a desired option and then  
press ENTER (b).  
Owner’s Manual & PC  
Software CD  
HDMI cable (1)  
[OK]  
Starts the software update.  
[Cancel]  
Exits the update menu and  
displays it next booting.  
[Hide]  
Exits the update menu and  
it does not appear until next  
software is uploaded in the  
update server.  
Option 2:  
If the software update is available from the update  
server, theSoftware Updateicon appears in the  
Home menu. Press blue (B) coloured button to start  
the update procedure.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
4
2011-04-26 �� 9:10:35  
Table of Contents  
5
3
System Setting  
Table of Contents  
13  
Settings  
13 – Adjust the Setup Settings  
13 – Resolution Setting  
14 – Wired Network Setup  
1
1
Getting Started  
2
4
4
4
6
6
Safety Information  
– Supplied Accesorries  
Network Software Update  
– Network update notification  
Introduction  
– Playable Discs and symbols used in  
this manual  
– File requirement  
Remote control  
Front panel  
4
Operating  
2
3
4
5
6
15  
General Playback  
15 – Using [HOME] menu  
15 – Playing a Disc  
15 – Playing a file on disc/USB device  
16 – Basic operations for video and audio  
content  
7
8
9
16  
On-Screen display  
10 Rear panel  
5
Troubleshooting  
2
Connecting  
17  
Troubleshooting  
18 – Customer Support  
18 – Open source software notice  
11  
12  
Positioning the system  
Speaker Connection  
12 – Attaching the speakers to the player  
6
Appendix  
19  
Trademarks and Licenses  
20 Specifications  
To view the Owner's Manual on the CD-ROM  
Load the supplied CD-ROM into the CD-ROM drive on your PC. After a while, the web page will open  
automatically. (Windows users only)  
If the web page does not appear automatically, browse the CD-ROM drive and double-click the "index.  
html" file.  
To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The  
"Acrobat Reader" folder on the CD-ROM contains the installation program for Acrobat Reader.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
5
2011-04-26 �� 9:10:36  
6
Getting Started  
Introduction  
1
Playable Discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
“Blu-ray 3Ddiscs andBlu-ray 3D ONLYdiscs.  
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-ray  
BD-R/RE discs that contain Movie, Music or  
Photo files.  
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
y
Discs such as movies that can be purchased or  
rented.  
y
r
Movie mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-ROM  
DVD-R  
Finalized AVCHD format  
DVD-RW  
DVD+R  
o
DVD+RW  
(8 cm, 12 cm)  
DVD R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
DVD-RW (VR)  
(8 cm, 12 cm)  
VR mode and finalized only  
Audio CD  
r
t
Audio CD  
(8 cm, 12 cm)  
CD-R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm, 12 cm)  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Indicates special notes and operating features.  
Note  
,
>
Indicates cautions for preventing possible  
damages from abuse.  
Caution  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
6
2011-04-26 �� 9:10:37  
Getting Started  
7
File requirement  
Movie files  
1
File  
Location  
File  
Extension  
Codec Format  
Audio Format  
Subtitle  
.avi,.divx,  
.mpg,.mpeg, DIVX5.xx, DIVX6.xx  
.mkv,.mp4,  
.asf,.wmv,  
.m4v(DRM  
free)  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
(.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
(standard playback  
only), XVID, MPEG1 SS, AC3  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS,  
VC-1 SM (WMV3)  
Disc,  
USB  
.avi,.divx,  
.mpg,.mpeg, DIVX5.xx, DIVX6.xx  
.mkv,.mp4,  
.asf,.wmv,  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), SubViewer  
1.0 (.sub), SubViewer 2.0 (.sub/.  
txt), TMPlayer (.txt), DVD Subtitle  
System (.txt)  
(standard playback  
only), XVID, MPEG1 SS, AC3  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS,  
VC-1 SM (WMV3)  
DLNA  
Music files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
within 32 - 192  
kbps (WMA), within not supported on this  
32 - 320 kbps (MP3) player.  
Note  
Disc,  
USB,  
DLNA  
“mp3,.wma,  
.wav,.m4a”  
(DRM free)  
within 32 - 48 kHz  
(WMA), within 16 - 48  
kHz (MP3)  
Some wav files are  
Photo files  
File  
Location  
File  
Extension  
Recommanded  
Size  
Note  
Disc,  
USB,  
DLNA  
.jpg,.jpeg,  
.png,  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
7
2011-04-26 �� 9:10:37  
8
Getting Started  
Remote control  
• • • • • • a • • • • • •  
• • • • • • c • • • • •  
1
RADIO&INPUT (P): Changes  
input mode.  
SPEAKER LEVEL: Sets the sound  
level of desired speaker.  
MARKER: Marks any point during  
playback.  
SOUND EFFECT: Selects a sound  
effect mode.  
1(POWER): Switches the player  
VOL +/- : Adjusts speaker volume.  
ON or OFF.  
OPTICAL: Changes input mode to  
optical directly.  
B(OPEN/CLOSE): Opens and  
closes the disc tray.  
MUTE(@): Mute the unit.  
SEARCH: Displays or exits the  
search menu.  
Coloured (R, G, Y, B) buttons:  
Use to navigate on menus.  
INFO/DISPLAY (m): Displays or  
exits On-Screen Display.  
MONO/STEREO: Selects mono/  
stereo in FM mode.  
HOME (n): Displays or exits the  
[Home Menu].  
SLEEP: Sets a certain period of  
time after which the unit will  
switch to off.  
DISC MENU: Accesses menu on a  
disc.  
XREC: Records an audio CD.  
• • • • • • b • • • • •  
MIC/ECHO:  
PRESET(-/+): Selects programme  
of Radio.  
Selects the microphone mode or  
microphone’s echo mode. After  
selecting the desired mode, press  
VOL +/- to adjust microphone  
volume or microphone’s echo  
volume.  
TUNING (-/+) : Tunes in the  
desired radio station.  
/
/
/
W S A D(up/ down/ left/  
right): Used to navigate on-screen  
displays.  
0-9 numerical buttons: Selects  
numbered options in a menu or  
inputs letters in the keypad menu.  
ENTER (b): Acknowledges menu  
selection.  
CLEAR: Removes a mark on the  
search menu or a number when  
setting the password.  
BACK (x): Exits the menu or  
resumes playback. The resume  
play function may not work  
depending on the BD-ROM disc.  
REPEAT (h): Repeats a desired  
section or sequence.  
Battery Installation  
TITLE/POPUP: Displays the DVD  
title menu or BD-ROM’s pop-up  
menu, if available.  
?: This button is not available.  
• • • • • • d • • • • •  
TV Control Buttons: See page 48.  
Z(STOP): Stops playback.  
z(PLAY): Starts playback.  
MPAUSE/STEP: Pauses playback  
Remove the battery cover on the  
rear of the Remote Control, and  
insert a (size AAA) battery with 4  
and 5matched correctly.  
c/v(SCAN): Searches  
backward or forward.  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
8
2011-04-26 �� 9:10:37  
Getting Started  
9
Front panel  
1
c MIC IN1/2  
PORT.IN  
a 1/' (POWER) Button  
b R(OPEN/CLOSE)  
T(PLAY/PAUSE)  
USB Port  
d Volume control  
I(STOP)  
Y/U (SKIP)  
FUNC. (Function)  
Changes the input source or function.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd  
9
2011-04-26 �� 9:10:38  
10 Getting Started  
Rear panel  
1
a Speakers connectors  
b Cooling Fan  
e AUX (R/L) IN/VIDEO OUT  
f HDMI OUT (Type A, HDMI™ Connector)  
Connect to TV with HDMI inputs.  
c Antenna Connector  
d OPTICAL IN  
g LAN port  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 10  
2011-04-26 �� 9:10:38  
Connecting 11  
Caution  
Be careful to make sure children not to put  
their hands or any objects into the *speaker  
duct.  
*Speaker duct: A hole for plentiful bass  
sound on speaker cabinet (enclosure).  
>
Positioning the system  
The following illustration shows an example of  
positioning the system. Note that the illustrations  
in these instructions differ from the actual unit for  
explanation purposes.  
For the best possible surround sound, all the  
speakers other than the subwoofer should be  
placed at the same distance from the listening  
y
y
y
Place the center speaker at a safe distance  
from the child’s reach.  
Otherwise it may result in the speaker falling  
down and causing personal injury and/or  
property damage.  
2
position ( ).  
A
The speakers contain magnetic parts, so  
colour irregularity may occur on the CRT  
TV screen or PC monitor screen. Please use  
the speakers away from the TV screen or PC  
monitor screen.  
B
C
G
A
F
A
A
A
E
A
A
D
Front left speaker (L)/  
Front right speaker (R):  
A
B
Place the front speakers to the sides of the monitor  
or screen and as flush with the screen surface as  
possible.  
Center speaker:  
C
Place the center speaker above or below the  
monitor or screen.  
Surround left speaker (L)/  
Surround right speaker (R):  
D
E
Place these speakers behind your listening position,  
facing slightly inwards.  
Subwoofer:  
F
The position of the subwoofer is not so critical,  
because low bass sounds are not highly directional.  
But it is better to place the subwoofer near the  
front speakers. Turn it slightly toward the center of  
the room to reduce the wall reflections.  
Unit  
G
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 11  
2011-04-26 �� 9:10:39  
12 Connecting  
Speaker Connection  
Attaching the speakers to the  
player  
Connect the wires hooked up to the speaker to the  
unit.  
- To connect the cable to the unit, press each  
plastic finger pad to open the connection  
terminals on the unit. Insert the wire and  
release the finger pad.  
2
- Connect the black stripe of each wire to the  
terminals marked - (minus) and the other end  
to the terminals marked + (plus).  
Colour  
Grey  
Speaker Position  
Rear  
Rear right  
Rear left  
Blue  
Rear  
Green  
Orange  
Center  
Centre  
Sub  
woofer  
Any front position  
Red  
Front  
Front  
Front right  
Front left  
White  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 12  
2011-04-26 �� 9:10:39  
System Setting 13  
Resolution Setting  
The player provides several output resolutions for  
HDMI OUT jack. You can change the resolution  
using [Setup] menu.  
Settings  
Adjust the Setup Settings  
You can change the settings of the player in the  
[Setup] menu.  
1. Press HOME (n).  
2. Use A/Dto select the [Setup] and press ENTER  
(b). The [Setup] menu appears.  
1. Press HOME (n).  
3. Use W/Sto select [DISPLAY] option then  
press Dto move to the second level.  
4. Use W/Sto select the [Resolution] option  
then press ENTER (b) to move to the third level.  
2. Use A/Dto select the [Setup] and press ENTER  
3
(b). The [Setup] menu appears.  
5. Use W/Sto select the desired resolution then  
press ENTER (b) to confirm your selection.  
Note  
,
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 576p as follows:  
y
3. Use W/Sto select the first setup option, and  
press Dto move to the second level.  
1. Press Bto open the disc tray.  
2
Press Z(STOP) for more than 5 seconds.  
4. Use W/Sto select a second setup option, and  
press ENTER (b) to move to the third level.  
5. Use W/Sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 13  
2011-04-26 �� 9:10:40  
14 System Setting  
5. The player will ask you to test the network  
connection. Select [OK] and press ENTER (b) to  
complete the network connection.  
Wired Network Setup  
If there is a DHCP server on the local area network  
(LAN) via wired connection, this player will  
automatically be allocated an IP address. After  
making the physical connection, a small number of  
home networks may require the player’s network  
setting to be adjusted. Adjust the [NETWORK]  
setting as follow.  
6. If you select [Test] and press ENTER (b) at  
step 5 above, the network connection status is  
displayed on the screen.  
You can also test it on the [Connection Status]  
in the [Setup] menu.  
Preparation  
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
1. Select [Connection Setting] option in the  
[Setup] menu then press ENTER (b).  
3
2. Select [Yes] and press ENTER (b) to continue.  
The new connection settings reset the current  
network settings.  
3. Use W/S/A/Dto select the IP mode  
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using W/S/  
A/Dand numerical buttons. If you make a  
mistake while entering a number, press CLEAR  
to clear the highlighted part.  
4. Select [OK] and press ENTER (b) to apply  
network settings.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 14  
2011-04-26 �� 9:10:41  
Operating 15  
Playing a Disc  
General Playback  
ert  
1. Press B(OPEN/CLOSE), and place a disc on the  
Using [HOME] menu  
disc tray.  
The home menu appears when you press HOME  
(n). Use A/Dto select a category and press  
ENTER (b).  
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
a
b
c
d
e
f
3. Press HOME (n).  
4. Select [Movie] or [Music] using A/D, and press  
ENTER (b).  
5. Select [BD], [DVD], [VR] or [Audio] option using  
W/S, and press ENTER (b).  
Note  
,
Playback functions described in this manual  
are not always available in every files and  
media. Some functions can be restricted  
depending on many factors.  
y
y
Depending on the BD-ROM titles, a USB  
device connection may be needed for the  
proper playback.  
4
a
b
c
d
e
f
[Movie] - Plays video contents.  
[Photo] - Plays photo contents.  
[Music] - Plays audio contents.  
Unfinalized DVD VR format discs may not be  
played in this player.  
y
y
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
[NetCast] - Access to the NetCast Home.  
[Input] - Changes input mode  
[Setup] - Adjusts the system settings.  
Playing a file on disc/USB  
device  
yui  
This player can play movie, music and photo files  
contained in the disc or USB device.  
1. Insert a data disc on the tray or connect a USB  
device.  
2. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
3. Select [Data] or [USB] option using W/S, and  
press ENTER (b).  
4. Select a file using W/S/A/D, and press  
d(PLAY) or ENTER (b) to play the file.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 15  
2011-04-26 �� 9:10:41  
16 Operating  
Basic operations for video and  
audio content  
On-Screen display  
You can display and adjust various information and  
settings about the content.  
To stop playback  
Press Z(STOP) while playback.  
eroy  
1. While playback, press INFO/DISPLAY (m) to  
To pause playback  
Press M(PAUSE) while playback.  
Press d(PLAY) to resume playback.  
show various playback information.  
To play frame-by-frame (Video)  
Press M(PAUSE) while movie playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
You can change the various playback speeds by  
pressing cor vrepeatedly.  
4
To slow down the playing speed  
(Video)  
a Title – current title number/total number of  
titles  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
b Chapter – current chapter number/total  
number of chapters  
c Time – elapsed playing time/total playback  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
time  
d Audio – selected audio language or channel  
e Subtitle – selected subtitle.  
f Angle – selected angle/total number of  
angles  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
g TV Aspect Ratio – selected TV aspect Ratio  
In the file list menu of a server, there may have  
many types of contents in a folder together. In this  
case, press Cor Vto go to the previous or  
next content with same type.  
h Picture Mode – selected picture mode  
2. Select an option using W/S.  
3. Use A/Dto adjust the selected option value.  
4. Press BACK(x) to exit the On-Screen display.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 16  
2011-04-26 �� 9:10:41  
Troubleshooting 17  
Troubleshooting  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, colour system, and  
regional code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play movie, photo or  
music files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The batteries in the remote control are exhausted.  
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
Press and hold the POWER button for at least five seconds. This will force  
5
the unit to power off then turn the unit back on.  
The unit is not operating  
normally.  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not suppot the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears.  
You are playing a disc recorded in a colour system that is different  
from your TV.  
y
Set the resolution which your TV accepts.  
y
y
Blu-ray 3D disc playback does  
not output 3D views.  
Connect the player to your TV with HDMI cable (Type A, High Speed  
HDMI™ Cable).  
Your TV may not supportHDMI 1.4 3D mandatory format.  
y
y
The [3D Mode] option in the [Setup] menu is set to [O].  
Set the option to [On].  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 17  
2011-04-26 �� 9:10:41  
18 Troubleshooting  
Symptom  
Cause & Solution  
BD-Live feature does not work.  
The connected USB storage may not have enough space. Connect  
the USB storage with at least 1GB free space.  
y
y
y
Ensure that the unit is correctly connected to the local area network  
and can access the internet.  
Your broadband speed may not fast enough to use the BD-Live  
features. Contact your Internet Service Provider (ISP) and increase the  
broadband speed is recommended.  
The [BD-LIVE connection] option in the [Setup] menu is set to  
[Prohibited]. Set the option to [Permitted].  
y
y
Streaming video services (such  
as YouTube™, etc.) are often  
stopped orbufferduring  
playback.  
Your broadband service speed may not be fast enough to stream  
video services. Contact your Internet Service Provider (ISP) and  
increase the broadband speed is recommended.  
Shared folder or files from  
The player is not connected to the local area network that your media  
media server are not displayed server are connected.  
on the device list.  
There is no sound or the sound  
is distorted.  
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
y
y
y
Check the speaker cable connection.  
Customer Support  
5
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made),  
Open source software notice  
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit  
available to download with the source code.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 18  
2011-04-26 �� 9:10:41  
Appendix 19  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,226,616; 6,487,535; 7,392,195; 7,272,567;  
7,333,929; 7,212,872 & other U.S. and worldwide  
patents issued & pending. DTS and the Symbol  
are registered trademarks,& DTS-HD, DTS-HD  
Master Audio | Essential and the DTS logos  
are trademarks of DTS, Inc. Product includes  
software. © DTS, Inc. All Rights Reserved.  
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,  
BONUSVIEW™ and the logos are trademarks of  
the Blu-ray Disc Association.  
“DVD Logois a trademark of DVD Format/Logo  
Licensing Corporation.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks  
of the Digital Living Network Alliance.  
Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
“AVCHDand theAVCHDlogo are trademarks of  
Panasonic Corporation and Sony Corporation.  
6
DivX®, DivX Certified® and associated logos  
are trademark of DivX, Inc., and are used under  
license.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 19  
2011-04-26 �� 9:10:42  
20 Appendix  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
Refer to main label.  
Refer to main label.  
Approx. 360 x 59 x 307 mm without foot  
2.8 kg  
5 °C to 35 °C (41 °F to 95 °F)  
5 % to 90 %  
Inputs/Outputs  
VIDEO OUT  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
19 pin (Type A, HDMI™ Connector)  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
Optical Connector x 1  
HDMI OUT (video/audio)  
ANALOG AUDIO IN  
DIGITAL IN (OPTICAL)  
PORT. IN  
0.5 Vrms (3.5 mm stereo jack)  
Tuner  
FM Tuning Range  
87.5 to 108.0 MHz or 87.50 to 108.00 MHz  
Amplifier  
Power output (3 Ω), (RMS), THD 10 % (3 Ω/ 3 Ω)  
Total  
850 W  
Front  
141 W x 2  
141 W  
6
Center  
Surround  
Sub-Woofer  
141 W x 2  
145 W (Passive)  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 20  
2011-04-26 �� 9:10:42  
Appendix 21  
System  
Laser  
Semiconductor laser  
Wavelength  
405 nm / 650 nm  
Signal system  
Standard NTSC color TV system  
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)  
More than 80 dB  
Frequency response  
Signal-to-noise ratio  
Total harmonic distortion  
Dynamic range  
LAN port  
0.05 % at 1 W  
More than 85 dB  
Ethernet jack x 1, 10BASE-T / 100BASE-TX  
DC 5 V 0500 mA  
Bus Power Supply (USB)  
Speakers  
Front speaker (Left/ Right)  
Type  
2 Way 3 speaker  
Max. Input power 282 W  
Net Dimensions  
(W x H x D)  
Impedance Rated 3 Ω  
200 x 550 x 200 mm  
1.34 kg  
Input Power  
141 W  
Net Weight  
Rear speaker (Left/ Right)  
Type  
2 Way 3 speaker  
Max. Input power 282 W  
Net Dimensions  
(W x H x D)  
Impedance Rated 3 Ω  
200 x 550 x 200 mm  
1.34 kg  
Input Power  
Center speaker  
Type  
141 W  
2 Way 3 speaker  
Net Weight  
Max. Input power 282 W  
Net Dimensions  
6
Impedance Rated 3 Ω  
311 x 96 x 69 mm  
1.04 kg  
(W x H x D)  
Input Power  
Subwoofer  
Type  
141 W  
1 Way 1 speaker  
Net Weight  
Max. Input power 290 W  
Net Dimensions  
Impedance Rated 3 Ω  
Input Power 145 W  
216 x 382 x 312 mm  
5.52 kg  
(W x H x D)  
Net Weight  
Design and specifications are subject to change without notice.  
y
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 21  
2011-04-26 �� 9:10:42  
An extended Owner's Manual that contains  
information on the advanced features is located  
on the CD-ROM provided in an electronic version.  
To read these files, you will need to use a Personal  
Computer (PC) equipped with a CD-ROM drive.  
HB806TM-F2_BINDLL_SIM_ENG_0727.indd 22  
2011-04-26 �� 9:10:42  

Pioneer DEH P360 User Manual
Pentax Camcorder PV C909A User Manual
Olympus CAMEDIA C480 User Manual
Metra Electronics AW 200GM User Manual
Manfrotto Car Amplifier V4 User Manual
Loewe CONNECT 42 User Manual
LG Electronics LG Lifes Good Car Video System M2762D User Manual
Kenwood KDC MP928 User Manual
Kenwood KDC 6090R User Manual
JVC KD AR7500 User Manual