Kenwood KDC MP928 User Manual

CD-RECEIVER  
KDC-MP928  
INSTRUCTION MANUAL  
Take the time to read through this instruction manual.  
Familiarity with installation and operation procedures will help you obtain the best  
performance from your new CD-receiver.  
For your records  
Record the serial number, found on the back of the unit, in the spaces designated on the  
warranty card, and in the space provided below. Refer to the model and serial numbers  
whenever you call upon your KENWOOD dealer for information or service on the product.  
Model KDC-MP928 Serial number  
US Residence Only  
Register Online  
Register your Kenwood product at  
© B64-3149-00/00 (KW)  
Menu system  
Menu System  
Security Code  
44  
Basic Operations of remote control 53  
Accessories/ Installation Procedure 56  
Touch Sensor Tone  
Manual Clock Adjustment  
Date Adjustment  
Date Mode  
Synchronize Clock  
DSI (Disabled System Indicator)  
Selectable Illumination  
Dimmer  
Contrast Adjustment  
Display-reversing Setting  
Built-in Amp Setting  
G-Counter Level set  
G-Analyzer Reset  
Connecting Wires to Terminals  
Installation  
57  
58  
60  
61  
64  
Removing the Unit  
Troubleshooting Guide  
Specifications  
G-Analyzer Calibration setup  
G-Analyzer Stop Watch  
Dual Zone System Setting  
Traffic Information  
CRSC (Clean Reception System Circuit)  
Receive mode Setting  
SIRIUS ID (ESN) display  
Auxiliary Input Display Setting & Station/Disc  
Naming  
Text Scroll  
Built-in Auxiliary input Setting  
CD Read Setting  
Picture downloading  
Voice Index  
ACDrive firmware version display  
Unique ID display  
Demonstration mode Setting  
Menu Added for DAB  
WOW, SRS and  
symbol are trademarks  
of SRS Labs, Inc.  
WOW technology is incorporated under  
license from SRS Labs, Inc.  
The "AAC" logo is trademark of Dolby  
Laboratories.  
English  
|
3
Safety precautions  
About CD players/disc changers  
connected to this unit  
KENWOOD disc changers/ CD players released in  
1998 or later can be connected to this unit.  
Refer to the catalog or consult your Kenwood  
dealer for connectable models of disc changers/  
CD players.  
2WARNING  
To prevent injury or fire, take the  
following precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools)  
inside the unit.  
Note that any KENWOOD disc changers/ CD players  
released in 1997 or earlier and disc changers made  
by other makers cannot be connected to this unit.  
Connecting unsupported disc changers/CD players  
to this unit may result in damage.  
Set the "O-N" Switch to the "N" position for the  
applicable KENWOOD disc changers/ CD players.  
The functions you can use and the information  
that can be displayed may differ depending on the  
models being connected.  
• Never watch the G-Analyzer Display screen when  
you are driving. Otherwise, a car accident may  
result.  
2CAUTION  
To prevent damage to the machine, take  
the following precautions:  
• Make sure to ground the unit to a negative 12V  
DC power supply.  
• Do not install the unit in a spot exposed to direct  
sunlight or excessive heat or humidity. Also avoid  
places with too much dust or the possibility of  
water splashing.  
You can damage both your unit and the CD changer if  
you connect them incorrectly.  
• Do not place the faceplate or the faceplate case in  
areas exposed to direct sunlight, excessive heat or  
humidity. Also avoid places with too much dust or  
the possibility of water splashing.  
LX-bus connection  
• The DAB tuner and the HD Radio tuner unit must  
be connected one at a time.  
• To prevent deterioration, do not touch the  
terminals of the unit or faceplate with your  
fingers.  
• Do not subject the faceplate to excessive shock,  
as it is a piece of precision equipment.  
• When replacing a fuse, only use a new fuse with  
the prescribed rating. Using a fuse with the wrong  
rating may cause your unit to malfunction.  
• Do not apply excessive force to the open  
faceplate or place objects on it. Doing so will  
cause damage or breakdown.  
Lens Fogging  
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
CD player of the unit. Called lens fogging, this  
condesnation on the lens may not allow CDs to  
play. In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit still  
does not operate normally after a while, consult  
your Kenwood dealer.  
• Do not use your own screws. Use only the screws  
provided. If you use the wrong screws, you could  
damage the unit.  
Attach the panel while you are on the  
vehicle  
The panel lock arm appears when the panel is  
removed. Therefore, the panel must be attached  
while the electrical system of the car is operating.  
Do Not Load 8 cm (3 in.) CDs in the CD  
slot  
If you try to load a 8 cm (3 in.) CD with its adapter  
into the unit, the adapter might separate from the  
CD and damage the unit.  
NOTE  
This Class B digital apparatus complies with  
Canadian ICES-003.  
|
4
English  
Notes  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• If the unit fails to operate properly, press the Reset  
button to restore factory settings.  
Before using this unit for the first time  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel the  
<Demonstration mode Setting> (page 52).  
• Press the reset button if the disc auto changer fails  
to operate correctly. Normal operation should be  
restored.  
About ODD (Offset Dual Differential) D/A  
System  
You can enjoy high quality sound play when  
playing music CDs with the ODD D/A System  
enabled. ODD D/A System has two built-in D/A  
converters and each D/A converter processes D/A  
conversion seperately on the front left and right  
channel. Since digital processing is performed for  
each channel seperately, noise occurance from  
interference between channels is completely  
suppressed and the seperation of audio sound  
output from two channels is distinguished and  
clear. Also, the ODD/A System produces the data  
by which the sound data is offset on the minus side  
and converts the two signals (original and offset  
data) to the analog signal, which has less noise and  
distortion, by the synthetic process.  
Reset button  
• We recommend the use of <Security Code>  
(page 44) to prevent theft.  
• The characters conforming to ISO 8859-1  
character set can be displayed.  
• There are places in this manual where lit  
indicators are described; however, the only time  
an indicator will light is in the following settings.  
When Indicator is selected as mentioned in <Text  
Display Switching> (page 22)  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
However, ODD D/A System will be disabled if the  
following settings are selected.  
- When "2ZONE" of <Audio Setup> (page 11) is  
"ON".  
- When <Bypass Control> (page 16) is "Bypass".  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off  
with a cloth moistened with neutral cleaner, then  
wipe it again with a clean soft dry cloth.  
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth  
or using a volatile liquid such as thinner or alcohol may  
scratch the surface or erases characters.  
Cleaning the Faceplate Terminals  
If the terminals on the unit or faceplate get dirty,  
wipe them with a clean soft dry cloth.  
English  
|
5
Notes  
2Warning  
About "Media Manager" of PC application  
• "Media Manager" is recorded in the CD-ROM  
attached to this unit.  
• Refer to the attached installation manual for the  
installation method of "Media Manager".  
• Refer to the user’s manual recorded in the  
installation CD-ROM and Help of "Media Manager"  
for the operation method of "Media Manager".  
• The unit can play CD (hereafter called "ACDrive  
disc") created by "Media Manager".  
2CAUTION  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
In compliance with Federal Regulations, following  
are reproductions of labels on, or inside the product  
relating to laser product safety.  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-MACHI,  
HACHIOJI-SHI  
• Refer to the following site for the updated  
information of "Media Manager".  
TOKYO, JAPAN  
• Contact Kenwood for the function and operation  
of the "Media Manager".  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS N0.21 CFR  
1040. 10, CHAPTER 1, SUBCHAPTER J.  
• "Media Manager" is a product of PhatNoise.  
Location : Bottom Panel  
FCC WARNING  
This equipment may generate or use radio  
frequency energy. Changes or modifications to  
this equipment may cause harmful interference  
unless the modifications are expressly approved  
in the instruction manual. The user could lose  
the authority to operate this equipment if an  
unauthorized change or modification is made.  
NOTE  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment may cause harmful  
interference to radio communications, if it is  
not installed and used in accordance with the  
instructions. However, there is no guarantee  
that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which  
can be determined by turning the equipment off  
and on, the user is encouraged to try to correct  
the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV  
technician for help.  
|
6
English  
About CDs  
Handling CDs  
• Do not touch the recording surface of the CD.  
Removing CDs  
When removing CDs from this unit pull them out  
horizontally.  
CDs that cannot be used  
• CDs that are nott round cannot be used.  
• CD-R and CD-RW are easier to damage than a  
normal music CD. Use a CD-R or a CD-RW after  
reading the caution items on the package etc.  
• Do not stick tape etc. on the CD, or use a CD with  
tape stuck on it.  
• CDs with coloring on the recording surface or CDs  
that are dirty cannot be used.  
• This unit can only play the CDs with  
When using a new CD  
If the CD center hole or outside rim has burrs,  
use the CD only after removing the burrs with a  
ballpoint pen, etc.  
.
This unit may not correctly play discs which do  
not have the mark.  
• You cannot play A CD-R or CD-RW that has not  
been finalized. (For the finalization process refer to  
your CD-R/CD-RW writing software, and your CD-  
R/CD-RW recorder instruction manual.)  
Burrs  
CD storage  
Burrs  
• Do not place CDs in direct sunlight (On the seat  
or dashboard etc.) or where the temperature is  
high.  
• Store CDs in their cases.  
CD accessories  
Do not use disc type accessories.  
CD cleaning  
Clean from the center of the disc and move  
outward.  
English  
|
7
About AAC, MP3 and WMA  
The playable AAC/MP3/WMA file (hereafter called  
Audio file) and the media format has the following  
limitation. The Audio file, which is not comforming  
to the specification, may not play normally, or the  
file and folder names may not display correctly.  
The maximum number of characters for  
display  
File/Folder name: 128 characters  
MP3 ID3 Tag/ WMA Contents property  
: 30 characters  
AAC song information: 60 characters  
Attach the correct extension for the Audio file (AAC:  
".M4A", MP3: ".MP3", WMA: ".WMA")  
Do not attach the extensions to files other than the  
Audio file. If the extension is attached, the file, which is  
not the Audio file, will play and outputs a loud noise,  
causing damage to the speaker.  
File/Folder name is the number of the characters  
including the extensions  
AAC ID3 Tag cannot be displayed.  
Limitation of structure for the file and the  
folder  
• Maximum number of directory levels: 8  
• Maximum number of folders: 100  
• Maximum number of files per folder: 4096  
The files with copy protection cannot be played.  
Playable AAC file  
".m4a" file encoded by AAC-LC format.  
for the details.  
Playing order of the Audio file  
The Audio file plays in the order which is written by  
writing software. You may be able to set the playing  
order by writing the play sequence numbers such  
as "01" to "99" at the beginning of the file name.  
Playable MP3 file  
• MPEG 1/2 Audio Layer 3 file  
• Transfer bit rate: 8-320 kbps  
• Sampling frequency  
Example  
: 16, 22.05, 24, 32, 44.1, 48 kHz  
0
¡
: F
Folder  
CD  
(1)  
Playable WMA file  
:
A
u
d
i
o
file  
• The file in accordance with Windows Media Audio  
(Except for the file for Windows Media Player 9 or  
after which applies the new functions)  
¡!  
2
¡"  
3
• Transfer bit rate: 48-192 kbps  
• Sampling frequency: 32, 44.1, 48 kHz  
¡#  
¡$  
Playable media  
• CD-ROM, CD-R, CD-RW  
4
¡%  
CD-RW discs which are quick formatted by the writing  
software cannot be used.  
When recording to the maximum media capacity at  
once, the writing software is set to "Disc at once".  
• Playing order  
Playing order after ¡! play.  
¡", ¡#, ¡$, ¡%...  
• File search  
Playable disc format  
Forward file search during ¡# play.  
Push the Control knob toward [¢] ¡$  
• Folder search  
Forward folder search during ¡" play.  
Push the Control knob toward [FM] 3, 4...  
• ISO 9660 Level 1/2  
• Joliet  
• Romeo  
• Long file name.  
• Folder select  
When the selection is set to directory 4, and you  
want to skip to the folder 2 at the same level.  
Push the Control knob towards [4] 2  
When the selection is set to directory 3, moves  
the level up by folder select.  
Push the Control knob towards [FM] 2  
|
8
English  
Notes on Multi-function System  
What is the Multi-function System?  
Multi-function System shows the Multi-function  
display, allowing you to select various functions and  
settings.  
Real operational example of the Multi-  
function System  
Example: Turning ON/OFF the Random Play during  
CD play.  
Functions available for the current source are  
displayed.  
1. Show the Multi-function display of the Random  
Play.  
Press the [NEXT] button.  
Operational  
1 Press the [NEXT] button to Show the Multi-  
function display  
Each time you press the [NEXT] button, the  
Multi-function display is switched among the  
Source Function display, System Function display,  
and blank display.  
Scan  
Random  
Repeat  
2. Select the "Random" item  
Rotate the [VOL] knob.  
Example: Multi-function display for CD source  
S.F.C  
Scan  
Random  
Repeat  
Scan  
Random  
Repeat  
S.M.S  
EQ  
SRS WOW  
DSP  
Display  
3. Turn ON/OFF the Random Play.  
Press the [VOL] knob.  
Each time you press the [VOL] knob under the  
"Random" function display the Random Play is  
turned ON/OFF.  
The operation ends automatically if you do not operate  
within 10 seconds:  
Scan  
Random  
Repeat  
2 Turn the [VOL] knob to highlight the item you  
want to select.  
3 Press the [VOL] knob to select the highlighted  
item.  
In the body text, steps 2 and 3 are described as follows:  
Turn the [VOL] knob to select "Random".  
Press the [VOL] knob.  
In the body text, steps 2 and 3 are described as follows:  
Turn the [VOL] knob to select the item you  
want to select.  
Press the [VOL] knob.  
During Multi-function System mode, the [VOL] knob or  
Control knob flashes to indicate that it is available for  
multi-function setting.  
Returning to the Previous Display  
Select "Return" on the Multi-function display, or  
press the [NEXT] button.  
English  
|
9
General features  
NEXT/MENU  
ATT  
ANG  
VOL  
AUTO  
SRC  
Control knob  
Release button  
S.F.C  
Tuner  
S.M.S  
EQ  
FM1-1ch 107.7 MHz  
SRS WOW  
DSP  
01-Jan-05 Sat  
Display  
ATT indicator  
Power  
The DAB tuner and the HD Radio tuner must be  
connected one at a time.  
Turning ON the Power  
Press the [SRC] button.  
Turning OFF the Power  
Press the [SRC] button for at least 1 second.  
Volume  
Increasing Volume  
Turn the [VOL] knob clockwise.  
Selecting the Source  
Press the [SRC] button.  
Decreasing Volume  
Turn the [VOL] knob counterclockwise.  
Source required  
SIRIUS tuner (Optional accessory)  
DAB (Optional accessory)  
Display  
"SIRIUS"  
"DAB"  
Tuner or HD Radio (Optional accessory) "TUNER" or "HD Radio"  
Attenuator  
CD  
"Compact Disc"  
"CD Changer"  
"AUX"  
Turning the volume down quickly.  
External disc (Optional accessory)  
Auxiliary input  
Press the [ATT] button.  
Auxiliary input (Optional accessory)  
Standby (Illumination only mode)  
"AUX EXT"  
"STANDBY"  
Each time you press the button is pressed, the  
Attenuator turns ON and OFF.  
When the Attenuator is ON, the "ATT" indicator  
blinks.  
|
10  
English  
Audio Control  
4 Setup the Audio item  
Turn the [VOL] knob.  
1 Select the source to adjust  
Press the [SRC] button.  
Adjustment Item Display  
Range  
Volume offset  
Dual Zone System  
"VOLUME OFFSET" –8 — 0  
"2ZONE" ON/OFF  
2 Enter Audio Control mode  
Press the [VOL] knob.  
3 Select the Audio item to adjust  
Press the [VOL] knob.  
Each time you press the knob, the item to be  
adjusted alternates between the items shown in  
the table below.  
Volume offset: Sets each source’s volume as a  
difference from the basic volume.  
Dual Zone System  
Main source and sub source (Auxiliary input) output  
Front channel and Rear channel separately.  
- Set up the channel of sub source by <Dual Zone  
System Setting> (page 48).  
- Select Main source by [SRC] button.  
- Adjust the volume of Front channel by [VOL] knob.  
- Adjust the volume of Rear channel by <Audio  
Control> (page 11).  
- The Audio Control has no effect on sub source.  
You can use the Dual Zone System with the Auxiliary  
input sources listed below.  
4 Adjust the Audio item  
Turn the [VOL] knob.  
Adjustment Item  
Display  
"REAR VOLUME" 0 — 35  
Range  
Rear Volume *1  
Subwoofer level*2*3 "SW LEVEL"  
–15 — +15  
Balance  
Fader*3  
"BALANCE"  
"FADER"  
Left 15 — Right 15  
Rear 15 — Front 15  
Exit Audio Control mode  
- Internal auxiliary input  
You can use the Dual Zone System only when you  
have set the rear speaker to any mode other than  
"None" in the <Sound Management system> (page  
13).  
When the "2ZONE" is ON, ignore the following setups.  
- <Sound Field Control> (page 12)  
- <Sound Management system> (page 13)  
- <Equalizer Control> (page 14)  
- <WOW Control> (page 15)  
*1 You can control this item when "2ZONE" of <Audio  
Setup> (page 11) is set to "ON".  
*2 You can control this item when Speaker Select  
Subwoofer of <Sound Management system> (page  
13) is set to any item other than "None".  
*2 You can control this item when <Subwoofer  
Output> (page 12) is set to "SUBWOOFER ON".  
*3 You can control this item when "2ZONE" of <Audio  
Setup> (page 11) is set to "OFF".  
- <Bypass Control> (page 16)  
ODD D/A System is not effective when the "2ZONE" is  
ON.  
5 Exit Audio Control mode  
Press the [AUTO] or [NEXT] button.  
5 Exit Audio Setup mode  
Press the [VOL] knob for at least 1 second.  
Audio Setup  
Setting the Sound system, such as Volume offset  
and Dual Zone.  
1 Select the source to adjust  
Press the [SRC] button.  
2 Enter Audio Setup mode  
Press the [VOL] knob for at least 1 second.  
3 Select the Audio Setup item to adjust  
Press the [VOL] knob.  
Each time you press the knob, the item to be  
adjusted alternates between the items shown in  
the table below.  
English  
|
11  
General features  
1
2
3
Subwoofer Output  
Sound Field control item  
"X'Over" "HPF Front"  
"fc" Front High Pass Filter Frequency  
"SLP" Front High Pass Filter Slope  
Turning the Subwoofer output ON or OFF.  
Hold down on [AM] of the Control knob for at  
least 1 second.  
"HPF Rear"*¹  
"fc" Rear High Pass Filter Frequency  
"SLP" Rear High Pass Filter Slope  
"LPF  
SubWoofer"*²  
Each time you press the button, Subwoofer  
output switches ON and OFF.  
When it is ON, "SUBWOOFER ON" is displayed.  
"fc" Subwoofer Low Pass Filter Frequency  
"SLP" Subwoofer Low Pass Filter Slope  
"Phase" Subwoofer Low Pass Filter Phase  
"DTA"  
"DTA Front"  
DTA Front  
"DTA Rear"*¹  
"DTA  
SubWoofer"*²  
DTA Rear  
DTA Subwoofer  
You can control this function when "2ZONE" of  
<Audio Setup> (page 11) is set to "OFF".  
You can control this item when Speaker Select  
Subwoofer of <Sound Management system> (page  
13) is set to any item other than "None".  
"POSI"  
"Preset"  
Position Setting  
Preset value storage/recalling  
"Preset": You can store an adjusted sound control  
value by selecting "Memory". Refer to  
<Memory mode> (page 16). Also, you  
can recall it by selecting "Recall". Refer to  
<Memory Recall mode> (page 16).  
Sound Field Control  
1 Select the source to adjust  
Press the [SRC] button.  
You can adjust "SubWoofer" when <Subwoofer  
Output> (page 12) is set to "SUBWOOFER ON".  
X'Over (Crossover Network Setup)  
You can manually set a crossover frequency for the  
speakers.  
DTA (Digital Time Alignment)  
Manually set the sound output timing of each  
channel.  
*1 You can control this item when Speaker Select Rear  
of <Sound Management system> (page 13) is set to  
any item other than "None".  
*2 You can control this item when Speaker Select  
Subwoofer of <Sound Management system> (page  
13) is set to any item other than "None".  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"S.F.C" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Enter Sound Field Control mode  
Turn the [VOL] knob to select "S.F.C".  
Press the [VOL] knob.  
To get the best sound, first set the Cabin Setting  
and Speaker Select Front/Rear parameters using the  
<Sound Management system> (page 13).  
When "2ZONE" of <Audio Setup> (page 11) is ON, you  
cannot select "S.F.C".  
5 Adjust the Sound Field Control item  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the setting  
alternates between the settings shown in the  
table below.  
4 Select the Sound Field Control item to  
adjust  
1 Turn the [VOL] knob to select the item you  
want to select. Press the [VOL] knob.  
2 Press the Control knob.  
Sound Field Control Item  
Range  
Front High Pass Filter Frequency/  
Rear High Pass Filter Frequency  
Through/40/60/80/100/120/  
150/180/220 (Hz)  
3 Push the Control knob towards [FM] or  
[AM].  
Front High Pass Filter Slope/  
Rear High Pass Filter Slope/  
Subwoofer Low Pass Filter Slope  
-12/-18 dB/Oct  
Subwoofer Low Pass Filter Frequency  
40/60/80/100/120/150/180/  
220 (Hz)/Through  
Subwoofer Low Pass Filter Phase  
Normal/ Reverse  
|
12  
English  
DTA Front/DTA Rear  
DTA Subwoofer  
0 — 20.33 (feet)  
"Preset": You can store an adjusted sound control  
value by selecting "Memory". Refer to  
<Memory mode> (page 16). Also, you  
can recall it by selecting "Recall". Refer to  
<Memory Recall mode> (page 16).  
Position Setting  
Front-Left/ Front-Right/  
Front/ ALL  
When the "2ZONE" of <Audio Setup> (page 11) is  
5 Adjust the Sound Management item  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the setting  
alternates between the settings shown in the  
table below.  
"ON", the following setups are ignored.  
- "X'Over"  
- "DTA"  
- "POSI"  
- "Preset"  
6 Exit Sound Field Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Sound Managemnt Item Range  
Cabin Setting  
OFF/ Compact/ Full Size Car/  
Wagon1/ Wagon2/ Minivan1/  
Minivan2/ SUV/ Minivan (Long)  
Speaker Select Front  
Speaker Select Rear  
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/  
7x10/ O.E.M./ 4/ 5 (inch)  
Sound Management system  
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/  
7x10/ None/ O.E.M./ 4/ 5 (inch)  
1 Select the source to adjust  
Press the [SRC] button.  
Speaker Select Subwoofer  
6 ½/ 8/ 10/ 12/ 15over/ None  
(inch)  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"S.M.S" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
6 Exit Sound Managemnt mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
3 Enter Sound Management mode  
Turn the [VOL] knob to select "S.M.S".  
Press the [VOL] knob.  
When "2ZONE" of <Audio Setup> (page 11) is ON, you  
cannot select "S.M.S".  
4 Select the Sound Management item to  
adjust  
Turn the [VOL] knob to select the item you  
want to select.  
Press the [VOL] knob.  
Multi-function item Sound Management Item  
"Cabin"  
"Front"  
"Rear"  
Cabin Setting  
Speaker Select Front  
Speaker Select Rear  
"Sub-W"  
"Preset"  
Speaker Select Subwoofer  
Preset value storage/recalling  
English  
|
13  
General features  
Equalizer Control  
Top 40  
Jazz  
"Top40"  
"Jazz"  
1 Select the source to adjust  
Press the [SRC] button.  
User memory:  
The values set on the <Equalizer Front Setting/  
Equalizer Rear Setting>.  
Change each setting value with the <Sound  
Management system> (page 13).  
First, select the speaker type with the Speaker setting.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until "EQ"  
appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Enter Equalizer Control mode  
Turn the [VOL] knob to select "EQ".  
Press the [VOL] knob.  
Equalizer Front Setting/  
Equalizer Rear Setting  
1 Select a frequency band you wish to adjust  
Press the Control knob.  
Each time you press the button is pressed, the  
band alternates between "Band 1" and "Band 4".  
2 Select the items to adjust for Equalizer.  
Press the [FM] or [AM] button.  
Each time you press the button is pressed, the  
item to be adjusted alternates between the  
items shown in the table below.  
When "2ZONE" of <Audio Setup> (page 11) is ON, you  
cannot select "EQ".  
4 Select the Equalizer Control item to adjust  
Turn the [VOL] knob to select the item you  
want to select.  
Press the [VOL] knob.  
Multi-function item Equalizer Control Item  
1
2
Equalizer Control Item  
Equalizer Frequency  
"SystemQ"  
"Front"  
System Q Setting  
"Band1"/ "FREQ"  
"Band2"/  
"Band3"/  
Equalizer Front Setting  
Equalizer Rear Setting  
Preset value storage/recalling  
"Level"  
Equalizer Level  
"Rear"*  
"Preset"  
"Q Factor" Equalizer Quality  
"Band4"  
3 Adjust the Equalizer.  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the setting  
alternates between the settings shown in the  
table below.  
"Preset": You can store an adjusted sound control  
value by selecting "Memory". Refer to  
<Memory mode> (page 16). Also, you  
can recall it by selecting "Recall". Refer to  
<Memory Recall mode> (page 16).  
* You can control this item when Speaker Select Rear  
of <Sound Management system> (page 13) is set to  
any item other than "None".  
Equarizer adjustment item Range  
Equalizer Front Frequency/  
Equalizer Rear Frequency  
Refer to the followings.  
5 Adjust the Equalizer control item  
Equalizer Front Level/  
Equalizer Rear Level  
–9 — +9  
System Q Setting (Sound Type)  
Push the Control knob towards [4] or  
[¢].  
Equalizer Front Quality/  
Equalizer Rear Quality  
0.25/ 0.50/ 1.00/ 2.00  
Each time you push the knob, the setting  
alternates between the settings shown in the  
table below.  
The frequency which can be selected by each  
Frequency band is shown below.  
Sound setting  
User memory  
Natural  
Rock  
Pops  
Display  
"User"  
"Natural"  
"Rock"  
"Pops"  
"Easy"  
Band  
Band1  
Band2  
Band3  
Band4  
Frequency  
60/ 80/ 100/ 120/ 160/ 200 (Hz)  
250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz)  
1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)  
5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)  
Easy  
|
14  
English  
WOW Control Item  
Effect  
FOCUS  
TruBass Front  
TruBass Rear  
SRS 3D  
Range  
Middle/High/User/Through/Low  
OFF/1 — 9  
OFF/1 — 4  
OFF/1 — 4  
OFF/1 — 4  
To get the best sound, first set the Cabin Setting  
and Speaker Select Front/Rear parameters using the  
<Sound Management system> (page 13).  
6 Exit Equalizer Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Effect: TruBass, FOCUS and SRS 3D are all set to values  
shown in the table below.  
Effect TruBass FOCUS SRS 3D  
WOW Control  
High  
Middle  
Low  
4
3
2
8
6
3
4
2
1
1 Select the source to adjust  
Press the [SRC] button.  
FOCUS: Adjusts the vertical position of the front  
speaker and sound image by virtual  
adjustment.  
TruBass: Assists the playback for the super bass sound.  
SRS 3D: Makes a natural 3D sound field.  
You cannot set SRS 3D in tuner source.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until "SRS  
WOW" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Enter WOW Control mode  
Turn the [VOL] knob to select "SRS WOW".  
Press the [VOL] knob.  
6 Exit WOW Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
When "2ZONE" of <Audio Setup> (page 11) is ON, you  
cannot select "SRS WOW".  
To get the best sound, first set the Speaker select.  
4 Select the WOW Control item to adjust  
Turn the [VOL] knob to select the item you  
want to select.  
Press the [VOL] knob.  
Multi-function item  
"Effect"  
WOW Control Item  
Effect  
"FOCUS"  
FOCUS  
"TB-F"  
"TB-R"*  
"SRS 3D"  
TruBass Front  
TruBass Rear  
SRS 3D  
* You can control this item when Speaker Select Rear  
of <Sound Management system> (page 13) is set to  
any item other than "None".  
5 Adjust the WOW control item  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the setting  
alternates between the settings shown in the  
table below.  
English  
|
15  
General features  
Bypass Control  
4 Put in the memory  
Turn the [VOL] knob to select "Memory1" or  
"Memory2".  
Temorarily bypassing DSP (Digital Signal  
Processor) System.  
Press the [VOL] knob for at least 2 seconds.  
The "MEMORY" display blinks 1 time.  
1 Select the source to adjust  
Press the [SRC] button.  
5 Exit Memory mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"DSP" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
"Memory1": When you press the Reset, all the  
sources will be the setting value which is  
registered.  
The following items cannot be registered.  
Rear Volume, Balance, Fader, Position Setting, System  
Q Setting  
3 Enter Bypass Control mode  
Turn the [VOL] knob to select "DSP".  
Press the [VOL] knob.  
When "2ZONE" of <Audio Setup> (page 11) is ON, you  
cannot select "DSP".  
Memory Recall mode  
4 Set up Bypass  
Recall the value in the memory by the memory  
mode.  
Press the [VOL] knob.  
"Bypass": There is no effect by DSP.  
"Through": There is an effect by DSP.  
1 Select the source to adjust  
Press the [SRC] button.  
When the mode is set to "Bypass", DSP System cannot  
be adjusted.  
When the mode is set to "Bypass", ODD D/A System is  
not effective.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"S.F.C" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Select the key function which contains the  
item you wish to recall  
Turn the [VOL] knob to select "S.F.C"/ "S.M.S"/  
"EQ".  
Memory mode  
Storing the values of Sound Control in memory.  
1 Setup Sound Control  
Refer to the following operations to setup the  
Sound Control.  
Press the [VOL] knob.  
4 Select the Preset Memory item  
Turn the [VOL] knob to select "Preset".  
Press the [VOL] knob.  
- <Audio Control> (page 11)  
- <Sound Field Control> (page 12)  
- <Sound Management system> (page 13)  
- <Equalizer Control> (page 14)  
5 Enter recall mode  
Turn the [VOL] knob to select "Recall".  
Press the [VOL] knob.  
2 Select the Preset Memory item  
Turn the [VOL] knob to select "Preset".  
Press the [VOL] knob.  
6 Select the recall item  
Turn the [VOL] knob to select "Recall1" or  
"Recall2".  
Press the [VOL] knob for at least 2 seconds.  
The "RECALL" display blinks 1 time.  
3 Enter Memory mode  
Turn the [VOL] knob to select "Memory".  
Press the [VOL] knob.  
|
16  
English  
"Recall1": Recall the value put in "Memory1" by  
<Memory mode> (page 16).  
"Recall2": Recall the value put in "Memory2" by  
<Memory mode> (page 16).  
2 Push the faceplate in until it clicks.  
The faceplate is locked in place, allowing you to  
use the unit.  
7 Exit Memory Recall mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Theft Deterrent Faceplate  
The faceplate of the unit can be detached and  
taken with you, helping to deter theft.  
Removing the Faceplate  
Press the Release button.  
The faceplate is unlocked, allowing you to detach  
it.  
Faceplate Angle Adjustment  
Press the [ANG] button for at least 1 second.  
Do not apply excessive force to the faceplate. It can  
cause damage.  
The faceplate is a precision piece of equipment and  
can be damaged by shocks or jolts. For that reason,  
keep the faceplate in its special storage case while  
detached.  
Do not expose the faceplate or its storage case to  
direct sunlight or excessive heat or humidity. Also  
avoid places with too much dust or the possibility of  
water splashing.  
Reattaching the Faceplate  
1 Align the shaft on the unit with the  
depression on the faceplate.  
English  
|
17  
General features  
8 Graphic display part  
9 G-Analyzer display part  
Display Type Selection  
Changing the display mode.  
5 Exit display control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Change the information by the Display Type. Refer to  
the page on the following table for the methods to  
alternate by the Display Type.  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
Display Type  
1st text 1  
2nd text 2  
3rd text 3  
4th text 4  
Icon 6  
A
B
C
D
22  
22  
22  
22  
E
18  
20  
22  
22  
22  
22  
27  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
26  
Text 7  
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
Graphic 8  
G-Analyzer 9  
18  
Each time you push the knob, the display mode  
alternates between the display modes shown in  
the table below.  
Display Type A/ Display Type B  
Display Mode Display  
Graphic part/ Spectrum Analyzer  
Display Switching  
"Display Type A"  
8
Changing the graphic Display/ Spectrum analyzer  
display.  
"Display Type B"  
8
7
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
"Display Type C"  
1
5
2
3
4
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
"Display Type D"  
1
2
6
3
4
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
"Display Type E"  
9
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
1 1st text display part  
2 2nd text display part  
3 3rd text display part  
4 4th text display part  
5 Indicator display part  
6 Icon display part  
Select the "Display Type A"/ "Display Type B"  
display.  
5 Select the graphic/ spectrum analyzer  
display  
Turn the [VOL] knob to select "SA/GRPH".  
Press the [VOL] knob.  
7 Text display part  
|
18  
English  
2 Select the wallpaper.  
Push the Control knob towards [FM] or  
[AM].  
Each time you push the knob, the Wallpaper  
changes.  
6 Select the graphic/ spectrum analyzer  
display part display  
Push the Control knob towards [4] or  
[¢].  
Each time you press the button, the graphic  
display/ spectrum analyzer display alternates  
between the displays shown in the table below.  
3 Exit Display Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Graphic display/ Spectrum Analyzer display  
Movie 1  
Movie 2  
Movie 3 (Movie 1 and Movie 2)  
Spectrum analyzer 1  
Spectrum analyzer 8  
Wallpaper & *Downloaded Wallpaper  
7 Exit display control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
* For Download Wall Paper, refer to <Picture  
downloading> (page 51).  
During standby, Spectrum analyzer cannot be  
selected.  
Display Type A/ Display Type B  
Wallpaper selecting  
Selecting a wallpaper to display when Display  
Type is set to "Display Type A"/ "Display Type B".  
1 Select the wallpaper display  
Refer to <Graphic part/ Spectrum Analyzer  
Display Switching> (page 18).  
2 Select the wallpaper  
Display the wallpapers one after another  
Press the Control knob.  
Each time you press the knob, the Wallpaper  
scan is turned ON and OFF.  
When scan is ON, "SCAN" is displayed.  
When scan is ON, each wallpaper is displayed  
every several seconds.  
Select wallpaper manually  
1 Turn the wallpaper scan OFF.  
Press the Control knob.  
Each time you press the knob, the Wallpaper  
scan is turned ON and OFF.  
English  
|
19  
General features  
Display Type B  
In Audio file source  
Text Selection for Display  
Information  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
File number & Play time  
Clock  
Display  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
"P-Time"  
Selecting the text display.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
"Clock"  
"Date"  
Date  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
In HD Radio source  
Information  
Station name  
Title  
Frequency  
Clock  
Display  
"Station Name"*  
"Title"*  
"Frequency"  
"Clock"  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
Date  
"Date"  
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
In SIRIUS tuner source  
Select the "Display Type B" display.  
Information  
Channel Name  
Song Title  
Artist Name  
Composer name  
Category Name  
Label Name  
Comment  
Display  
"Channel Name"  
"Song Title"  
"Artist Name"  
"Composer Name"  
"Category Name"  
"Label Name"  
"Comment"  
5 Enter text select mode  
Turn the [VOL] knob to select "Text".  
Press the [VOL] knob.  
6 Select the text  
Push the Control knob towards [4] or  
[¢].  
Channel number  
Clock  
Date  
"Channel Number"  
"Clock"  
"Date"  
In Tuner source  
Information  
Station name or Program Service name  
Display  
"BAND+ch+SNPS"*  
In DAB source  
Radio text or Program Service name (FM) "Radio Text"*  
Frequency  
Clock  
Date  
"BAND+ch+FREQ"  
"Clock"  
"Date"  
Information  
Service label  
Dynamic label  
PTY label  
Component label  
Audio quality  
Ensemble label  
Region label  
Received Frequency  
Clock  
Display  
"Service Label"*  
"Dynamic Label"*²  
"PTY Label"*²  
"Component Label"*  
"Audio Quality"*²  
"Ensemble Label"*  
"Region Label"*  
"Frequency"  
In CD & External disc source  
Information  
Disc title  
Track title  
Track number & Play time  
Disc Name  
Clock  
Display  
"Disc Title"*  
"Track Title"*  
"P-Time"  
"DNPS"*¹  
"Clock"  
"Clock"  
"Date"  
Date  
Date  
"Date"  
|
20  
English  
In Auxiliary input source  
Information  
Auxiliary input name  
Clock  
Display  
"AUX Name"/ "AUX EXT"  
"Clock"  
Date  
"Date"  
In Standby mode  
Information  
Source name  
Clock  
Display  
"Standby"  
"Clock"  
Date  
"Date"  
7 Exit Display Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Auxiliary input name is displayed for the Auxiliary  
input source.  
* If the contents of the information cannot be  
displayed, Play time or Frequency is displayed.  
*¹ If the contents of the information cannot be  
displayed, "No Name" is displayed.  
*² If the contents of the information cannot be  
displayed, "No Text"/"None"/"Obscure Audio" is  
displayed.  
If the contents of the information for the SIRIUS  
tuner source cannot be displayed, channel number is  
displayed.  
Track number at Audio file displays the last 3 digits  
when the track number exceeds 1000 songs.  
English  
|
21  
General features  
3 3rd text display part  
4 4th text display part  
5 Indicator display part  
6 Icon display part  
Display Type C/ Display Type D  
Text Display Switching  
Changing the text display.  
Select the row  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Push the Control knob towards [FM] or [AM].  
The cursor (Ü) moves to the selected text display  
part.  
Select the text  
Push the Control knob towards [4] or  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
[¢].  
Refer to the table described later for setting  
items.  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
7 Exit Display Control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
Select the "Display Type C"/"Display Type D"  
display.  
Same information cannot be displayed in 1st – 4th  
text display part. However, the blank display is able to  
have multiple selections.  
* If the contents of the information cannot be  
displayed, either of the following is displayed:  
- In the 1st text display part1 , the play time or  
frequency is displayed.  
5 Enter text select mode  
Turn the [VOL] knob to select "Text".  
Press the [VOL] knob.  
- In other modes, blank is displayed.  
*¹ If the contents of the information cannot be  
displayed, "No Name" is displayed.  
*² If the contents of the information cannot be  
displayed, "No Text"/"None"/"Obscure Audio" is  
displayed.  
6 Select the text display part  
Select the display mode  
Press the Control knob.  
Each time you push the knob, the display mode  
alternates between the display modes shown in  
the table below.  
If the contents of the information for the SIRIUS  
tuner source cannot be displayed, channel number is  
displayed.  
Setting in some rows cannot be changed during  
interrupt mode (e.g., traffic information).  
Display Type C  
Display Type D  
1
1
2
3
4
6
5
2
3
4
a
b
c
1
2
3
4
1
2
3
4
6
6
Texts displayed on Display Type C/D display  
in 2-item displaya mode  
In Tuner source  
1
1
Information (12)  
Source name  
Frequency  
a Source display and 2-item display  
b 4-item display  
c 1-item 4-row display  
1 1st text display part  
2 2nd text display part  
Information (34)  
Radio text (FM)  
Station name or Program Service  
name  
Display  
"Radio Text"*  
"SNPS"*¹  
|
22  
English  
In HD Radio source  
Spectrum Analyzer & Clock  
Date  
No display  
"Speana/Clock"  
"Date"  
"Blank"  
Information (12)  
Source name  
Frequency  
In CD & External disc source  
Information (34)  
Station name  
Title  
Spectrum Analyzer & Clock  
Date  
Display  
"Station Name"*  
"Title"*  
"Speana/Clock"  
"Date"  
"Blank"  
Information (12)  
Source name  
Track number & Play time  
Information (34)  
Disc title  
Track title  
Display  
No display  
"Disc Title"*  
"Track Title"*  
"DNPS"*¹  
In SIRIUS tuner source  
Disc name  
Spectrum Analyzer & Clock  
Date  
No display  
"Speana/Clock"  
"Date"  
"Blank"  
Information (12)  
Source name  
Band & Channel Number  
Information (34)  
Channel Name  
Song Title  
Display  
In Audio file source  
"Channel Name"*  
"Song Title"*  
"Artist Name"*  
"Composer Name"*  
"Category Name"*  
"Label Name"*  
"Comment"*  
"Speana/Clock"  
"Date"  
Information (12)  
Source name  
Folder number, File number & Play time  
Artist Name  
Composer name  
Category Name  
Label Name  
Comment  
Spectrum Analyzer & Clock  
Date  
Information (34)  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
Spectrum Analyzer & Clock  
Date  
Display  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
"Speana/Clock"  
"Date"  
No display  
"Blank"  
In DAB source  
No display  
"Blank"  
Information (12)  
Source name  
In Standby  
Frequency  
Information (12)  
Source name  
Information (34)  
Service label  
Dynamic label  
PTY label  
Component label  
Audio quality  
Ensemble label  
Region label  
Spectrum Analyzer & Clock  
Date  
Display  
"Service Label"*  
"Dynamic Label"*²  
"PTY Label"*²  
"Component Label"*  
"Audio Quality"*²  
"Ensemble Label"*  
"Region Label"*  
"Speana/Clock"  
"Date"  
Information (34)  
Clock  
Date  
No display  
Display  
"Clock"  
"Date"  
"Blank"  
In Auxiliary input source  
Information (12)  
Source name  
Information (34)  
Spectrum Analyzer & Clock  
Date  
Display  
"Speana/Clock"  
"Date"  
No display  
"Blank"  
No display  
"Blank"  
English  
|
23  
General features  
Texts displayed on Display Type C/D display  
In Auxiliary input source  
in 4-item displayb mode  
Information  
Auxiliary input name  
Indicator  
Spectrum Analyzer & Clock "Speana/Clock"  
Date  
Display  
"AUX Name"/"AUX EXT"  
"Indicator"  
Condition  
1
In Tuner source  
1234  
1234  
1234  
234  
Information  
Display  
Condition  
1
Station name or Program "BAND+ch+SNPS"*  
Service name  
"Date"  
"Blank"  
No display  
Radio text or Program  
Service name (FM)  
"Radio Text"*  
1
In HD Radio source  
Radio text (FM)  
"Radio Text"*  
234  
234  
Information  
Station name  
Title  
Frequency  
Indicator  
Spectrum Analyzer & Clock "Speana/Clock"  
Date  
No display  
Display  
"Station Name"*  
"Title"*  
"Frequency"  
"Indicator"  
Condition  
1234  
1234  
1
Station name or Program "SNPS"*¹  
Service name  
Frequency  
Indicator  
"BAND+ch+FREQ"  
"Indicator"  
1
1234  
1234  
1234  
234  
1234  
1234  
1234  
234  
Spectrum Analyzer & Clock "Speana/Clock"  
Date  
"Date"  
"Date"  
"Blank"  
No display  
"Blank"  
In CD & External disc source  
In SIRIUS tuner source  
Information  
Disc title  
Track title  
Track number & Play time  
Disc name  
Indicator  
Display  
Condition  
Information  
Channel Name  
Song Title  
Display  
Condition  
"Disc Title"*  
"Track Title"*  
"P-Time"  
"DNPS"*¹  
"Indicator"  
1234  
1234  
1
"Channel Name"* 1234  
"Song Title"*  
1234  
Artist Name  
"Artist Name"*  
1234  
1234  
1234  
1234  
1234  
234  
Composer name  
Category Name  
Label Name  
"Composer Name"* 1234  
"Category Name"* 1234  
"Label Name"*  
"Comment"*  
Spectrum Analyzer & Clock "Speana/Clock"  
1234  
1234  
1
Date  
"Date"  
Comment  
No display  
"Blank"  
Band & Channel Number  
Indicator  
"Channel Number"  
"Indicator"  
1234  
1234  
1234  
234  
In Audio file source  
Spectrum Analyzer & Clock "Speana/Clock"  
Information  
Display  
Condition  
Date  
"Date"  
Song title & Artist name  
"Title/Artist"*  
1234  
1234  
1234  
1234  
1
No display  
"Blank"  
Album name & Artist name "Album/Artist"*  
In DAB source  
Folder name  
File name  
File number & Play time  
Indicator  
"Folder Name"  
"File Name"  
"P-Time"  
Information  
Service label  
Dynamic label  
PTY label  
Component label  
Audio quality  
Ensemble label  
Region label  
Display  
"Service Label"*  
Condition  
1234  
"Indicator"  
1234  
1234  
1234  
234  
"Dynamic Label"*² 1234  
"PTY Label"*²  
1234  
"Component Label"* 1234  
"Audio Quality"*²  
1234  
"Ensemble Label"* 1234  
"Region Label"*  
"Frequency"  
"Indicator"  
Spectrum Analyzer & Clock "Speana/Clock"  
Date  
"Date"  
No display  
"Blank"  
In Standby  
1234  
Information  
Standby  
Indicator  
Clock  
Display  
"Standby"  
"Indicator"  
"Clock"  
Condition  
1
Received Frequency  
Indicator  
1
1234  
1234  
1234  
234  
1234  
1234  
1234  
234  
Spectrum Analyzer & Clock "Speana/Clock"  
Date  
"Date"  
Date  
"Date"  
No display  
"Blank"  
No display  
"Blank"  
|
24  
English  
For the SIRIUS tuner source, information is displayed in  
the 2-item display mode.  
Texts displayed on Display Type C/D in 1-item  
4-rowc mode  
Display Type C  
Display Type D  
In Tuner source  
1
1
2
6
Information  
Radio text or Program Service name "Radio Text"*  
(FM)  
Display  
2
In CD & External disc source  
Information  
Disc title  
Track title  
Display  
"Disc Title"*  
"Track Title"*  
In Audio file source  
Information  
Display  
Song title & Artist name  
Album name & Artist name  
Folder name  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
File name  
In HD Radio source  
Information  
Display  
Title  
"Title"*  
In SIRIUS tuner source  
Information  
Channel Name  
Song Title  
Display  
"Channel Name"*  
"Song Title"*  
Artist Name  
Composer name  
Category Name  
Label Name  
Comment  
"Artist Name"*  
"Composer Name"*  
"Category Name"*  
"Label Name"*  
"Comment"*  
In DAB source  
Information  
Display  
Dynamic label  
"Dynamic Label"*  
If whole information cannot be displayed within four  
rows, hold down on [FM] of the Control knob for at  
least 1 second to display the remaining portion of the  
information.  
External disc source can be selected when a unit  
supporting the text display function is connected.  
English  
|
25  
General features  
During album art downloading, "Down-loading" is  
displayed. Downloading requires a maximum of 30  
seconds.  
Display Type D  
Icon Display Switching  
Changing the Icon Display6.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Display Type B/ Display Type C/ Display Type D  
Font Color Select  
Selecting the display font color.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
Select the "Display Type D" display.  
5 Enter Icon select mode  
Turn the [VOL] knob to select "Side".  
Press the [VOL] knob.  
4 Select the display Type  
Push the Control knob towards [4] or  
[¢].  
Select the "Display Type B"/"Display Type  
C"/"Display Type D" display.  
6 Switch the Icon display  
Push the Control knob towards [4] or  
[¢].  
5 Enter Font Color select mode  
Turn the [VOL] knob to select "FontCOL".  
Press the [VOL] knob.  
Each time you press the button is pressed, the  
setting alternates as shown below.  
Icon display  
Display  
6 Select the text display part  
Source graphic  
Text label  
Play mode label (ACDrive disc)  
Album art (ACDrive disc)  
"Source"  
"Text"  
"Play Mode"  
"Photograph"  
Select the Font Color mode  
Press the Control knob.  
Each time you press the knob, the font color  
mode is switched between Basic (12 colors) and  
Detail (115 colors).  
The cursor (Ü) is displayed in blue. In the Detail  
mode, it is displayed in red.  
7 Exit display control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
Select the row (Display Type C/Display Type  
D only)  
Push the Control knob towards [FM] or [AM].  
The cursor (Ü) moves to the selected text display  
part.  
The Album art display function displays the image  
attached to the file by Media Manager. This function  
cannot display the image contained in the play list.  
The Album art display function is not used to display  
the image corresponding to the tag recorded in the  
Audio file.  
If Album art display is selected during playback of an  
ACDrive disc on which no album art is recorded, a  
source icon is displayed.  
Select the Font Color  
Push the Control knob towards [4] or  
[¢].  
|
26  
English  
7 Exit display control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
G-Analyzer display  
G- Graphic display  
G-Meter display  
G-Counter display  
When you selected the Display Type B display, select  
an easy viewable font color.  
ACCELERATION  
CORNERING  
The "Indicator" item of Display type C/D can be set;  
however, the actual display color does not change.  
This function can be set for each display type.  
When the SIRIUS tuner source in the 1-item 4-rowc  
mode of Display type C/D, the same color is set for  
both the upper and lower rows.  
Point  
Time  
G-Graphic display:  
Display Type E  
Displays the condition of G in horizontal direction (e.g;  
when turning the curve) by the graphic.  
G-Meter display (Graphic part):  
Displays the maximum value of acceleration G, right  
direction G, and left direction G by the numerical  
value.  
G-Analyzer display Switching  
Alternates G-Analyzer display when the Display  
type is set to "Display Type E". (G: gravity)  
G-Meter display (Text part):  
Never watch the G-Analyzer Display screen when you  
are driving.  
Otherwise, a car accident may result.  
The maximum value of acceleration G, right direction  
G, and left direction G is displayed by the numerical  
value. The value of G is only the reference, so is  
different from the actual value.  
G-Counter display:  
Before alternating G-Analyzer display, you are required  
to setup <G-Counter Level set> (page 47) and <G-  
Analyzer Calibration setup> (page 48).  
Adds the point of the acceleration level. The point is  
determined after a lapse of 1 hr drive or at power off  
(ACC Off), and then it will be displayed by the graph.  
Furthermore, the G-Counter displays the average  
of the past data by the line. (The scale of graph is  
determined along with the largest point among the  
past 10 data.)  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Display" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
The value of G-Meter display and G-Counter display  
can be reset by <G-Analyzer Reset> (page 47).  
2 Enter display control mode  
Turn the [VOL] knob to select "Display".  
Press the [VOL] knob.  
6 Exit display control mode  
Turn the [VOL] knob to select "Return".  
Press the [VOL] knob.  
3 Select the display mode  
Turn the [VOL] knob to select "Mode".  
Press the [VOL] knob.  
Select the "Display Type E" display.  
4 Enter G-Analyzer display select mode  
Turn the [VOL] knob to select "G-Menu".  
Press the [VOL] knob.  
5 Select the G-Analyzer display  
Push the Control knob towards [4] or  
[¢].  
English  
|
27  
General features  
Station/Disc Naming (SNPS/DNPS)  
9 Exit Menu mode  
Press the [MENU] button.  
Attaching a title to a Station or CD.  
1 Receive/play the station/disc you want to  
attach a title to  
When operation stops for 10 seconds the name at  
that time is registered, and Menu mode closes.  
Memory numbers  
- FM/AM: 30 stations  
- Internal CD player: 10 discs  
A title cannot be attached to MD or Audio file media.  
- External CD changer/ player: Varies according to the  
CD changer/ player. Refer to the CD changer/ player  
manual.  
Change the title of station/CD by the same operation  
used to name it.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
3 Select Name set mode  
Push the Control knob towards [4] or  
[¢].  
Select the "Name Set" display.  
TEL Mute  
4 Enter Name set mode  
The audio system automatically mutes when a  
call comes in.  
Press the Control knob for at least 1 second.  
5 Move the cursor to the enter character  
position  
Push the Control knob towards [4] or  
[¢].  
When a call comes in  
"Call" is displayed.  
The audio system pauses.  
6 Select the character type  
Press the Control knob.  
Listening to the audio during a call  
Press the [SRC] button.  
Each time you press the knob, the character type  
alternates between the types shown in the table  
below.  
The "Call" display disappears and the audio  
system comes back ON.  
When the call ends  
Hang up the phone.  
The "Call" display disappears and the audio  
system comes back ON.  
Character type  
Display  
"A-Z"  
"a-z"  
"1•*"  
"ë"  
Alphabet upper case  
Alphabet lower case  
Numbers and symbols  
Special characters (Accent characters)  
7 Select the characters  
Push the Control knob towards [FM] or [AM].  
Enter characters by using a remote control with  
numbers buttons.  
Example: If you are entering "DANCE".  
Character  
"D"  
"A"  
"N"  
"C"  
Button  
[3]  
[2]  
[6]  
[2]  
Times pressed  
1
1
2
3
2
"E"  
[3]  
8 Repeat steps 5 through 7 and enter the name.  
|
28  
English  
Tuner features  
NEXT  
VOL  
AUTO/AME  
SRC  
Control knob  
Band display  
Frequency display  
1
2
3
4
5
6
Tuner  
FM1-1ch 107.7 MHz  
SNPS  
ST indicator  
Preset station number  
Tuning  
Tuning Mode  
Selecting the station.  
Choose the tuning mode.  
Press the [AUTO] button.  
1 Select tuner source  
Press the [SRC] button.  
Select the "TUNER" display.  
Each time you press the button, the Tuning  
mode alternates between the modes shown in  
the table below.  
2 Select the band  
Tuning mode  
Auto seek  
Display  
Operation  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob toward [FM], it  
switches between the FM1, FM2, and FM3 bands.  
"Seek Mode: Automatic search for a station.  
Auto1"  
Preset station seek "Seek Mode: Search in order of the stations  
Auto2" in the Preset memory.  
3 Tune up or down band  
Push the Control knob towards [4] or  
[¢].  
Manual  
"Seek Mode: Normal manual tuning control.  
Manual"  
During reception of stereo stations the "ST" indicator  
is ON.  
English  
|
29  
Tuner features  
Function of remote control  
Auto Memory Entry  
Direct Access Tuning  
Putting stations with good reception in the  
memory automatically.  
Entering the frequency and tuning.  
1 Select the band for Auto Memory Entry  
Push the Control knob towards [FM] or [AM].  
1 Select the band  
Press the [FM] or [AM] button.  
2 Open Auto Memory Entry  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote  
control.  
Press the [AME] button for at least 2 seconds.  
When 6 stations that can be received are put in  
the memory Auto Memory Entry closes.  
"– – – –" is displayed.  
3 Enter the frequency  
Press the number buttons on the remote  
control.  
Example:  
Preset Tuning  
Desired frequency  
92.1 MHz (FM)  
810 kHz (AM)  
Press button  
[0], [9], [2], [1]  
[0], [8], [1], [0]  
Recalling the stations in the memory.  
1 Select the band  
Push the Control knob towards [FM] or [AM].  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Station Preset Memory  
3 Select a preset number  
Turn the [VOL] knob.  
Putting the station in the memory.  
4 Recall the station  
Press the [VOL] knob.  
1 Select the band  
Push the Control knob towards [FM] or [AM].  
2 Select the frequency to put in the memory  
Push the Control knob towards [4] or  
[¢].  
3 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
4 Select a preset number  
Turn the [VOL] knob.  
5 Put the frequency in the memory  
Press the [VOL] knob for at least 2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the  
memory on each [1] — [6] number.  
|
30  
English  
RDS features  
NEXT  
VOL  
AUTO  
SRC  
Control knob  
1
2
3
4
5
6
Tuner  
FM1-1ch 107.7 MHz  
SNPS  
Radio Text  
Radio text  
Radio Text Scroll  
Registration of a station as a PTY  
Scrolling the displayed radio text.  
Registering a Program Type for stations with no  
PTY data.  
Hold down on [FM] of the Control knob for at  
least 1 second.  
1 Receive the station you want to register  
2 Select the Program Type to register  
Refer to <PTY (Program Type)> (page 32).  
3 Register the Program Type  
Press the [AUTO] button for at least 2  
seconds.  
Confirming the Program Type  
Press the [AUTO] button.  
The Program Type is displayed for 3 seconds.  
4 Exit PTY mode  
Press the Control knob.  
English  
|
31  
RDS features  
PTY (Program Type)  
3 Search for the selected Program Type  
station  
Push the Control knob towards [4] or  
[¢].  
When you want to search for other stations, push  
toward [4] or [¢] of the Control knob again.  
Selecting the Program Type and searching for a  
station.  
1 Enter PTY mode  
Press the Control knob.  
"PTY Select" is displayed.  
When selected Program Type is not found, "No PTY" is  
displayed. Select another Program Type.  
The PTY function cannot be used during a traffic  
bulletin or AM reception.  
4 Exit PTY mode  
Press the Control knob.  
2 Select the Program Type  
Push the Control knob towards [FM] or [AM].  
No.  
1.  
2.  
Program Type  
Speech  
Music  
Display  
"All Speech"  
"All Music"  
"News"  
Program Type preset  
3.  
News  
Putting the Program Type in the Preset button  
memory and quick recall.  
4.  
5.  
Information  
Sports  
"Information"  
"Sports"  
6.  
Talk  
"Talk"  
Presetting the Program Type  
7.  
8.  
9.  
Rock  
"Rock"  
1 Select the Program Type to preset  
Classic Rock  
Adult Hits  
Soft Rock  
Top 40  
Country  
Oldies  
Soft  
Nostalgia  
Jazz  
"Classic Rock"  
"Adult Hits"  
"Soft Rock"  
"Top 40"  
"Country"  
"Oldies"  
"Soft"  
"Nostalgia"  
"Jazz"  
"Classical"  
"Rhythm & Blues"  
"Soft R & B"  
"Foreign Language"  
"Religious Music"  
"Religious Talk"  
"Personality"  
"Public"  
Refer to <PTY (Program Type)> (page 32).  
2 Select a preset number  
Turn the [VOL] knob.  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
3 Preset the Program Type  
Press the [VOL] knob for at least 2 seconds.  
Recalling the preset Program Type  
1 Enter PTY mode  
Refer to <PTY (Program Type)> (page 32).  
Classical  
R & B  
2 Select a preset number  
Turn the [VOL] knob.  
Soft R & B  
Language  
Religious Music  
Religious Talk  
Personality  
Public  
3 Recall the Program Type  
Press the [VOL] knob.  
College  
Weather  
"College"  
"Weather"  
Speech and Music include the Program type below.  
Music: No.7 — 19, 21  
Speech: No.3 — 6, 20, 22 — 26  
The Program Type can be put in the [1] — [6] number  
memory and recalled quickly. Refer to the <Program  
Type preset> (page 32).  
|
32  
English  
CD/Audio file/External disc control features  
0
NEXT  
VOL  
SRC  
Control knob  
IN indicator  
Folder number  
Play mode indicator  
S.Mode  
Compact Disc  
Scan  
Random  
Repeat  
F.SEL  
PLY F-02 T-01 10 : 00  
Album/Artis
Title  
Track number  
Track time  
During AAC/MP3/WMA file playback, the AAC, MP3,  
and WMA indicators are lit.  
Playing CD & Audio file  
When there is no disc inserted  
When a disc is inserted  
Press the [SRC] button.  
Select the "Compact Disc" display.  
1 Open the panel.  
Press the [0] button.  
Pause and play  
2 Insert a disc.  
Press the Control knob  
Each time you press the knob, the audio pauses  
or plays.  
When the faceplate slides open, it might interfere  
with the shift lever or other vehicle function. If this  
happens, pay attention to safety and move the shift  
lever or take an appropriate action to remove the  
obstacle, then operate the unit.  
Insert the disc horizontal to the slot. If you insert the  
Disc as you push down on the Disc, it may scratch the  
Disc.  
Eject the disc  
1 Eject the disc  
Press the [0] button.  
2 Return the panel to the original position  
Press the [0] button.  
Refer to <About AAC, MP3 and WMA> (page 8) for the  
Audio file by models you can play.  
You can play the disc (ACDrive disc) made by Media  
Manager by the same operation.  
You can cancel the announcement when selecting  
the folder by <Voice Index> (page 51) during the play  
of the ACDrive.  
When a disc is inserted the "IN" indicator is ON.  
English  
|
33  
CD/Audio file/External disc control features  
Function of disc changer/ Audio file  
Playing External Disc  
Disc Search/Folder Search  
Playing discs set in the optional accessory disc  
player connected to this unit.  
Selecting the disc set in the Disc changer or the  
folder recorded on the Audio file media.  
Press the [SRC] button.  
Select the display for the disc player you want.  
Display examples:  
Push the Control knob towards [FM] or [AM].  
Display  
"CD Changer"  
"MD Changer"  
Disc player  
CD changer  
MD changer  
Function of remote control  
Direct Track/File Search  
Pause and play  
Doing Track/File Search by entering the track/file  
number.  
Press the Control knob.  
Each time you press the knob, the audio pauses  
or plays.  
1 Enter the track/file number  
Press the number buttons on the remote  
control.  
The functions that can be used and the information  
that can be displayed will differ depending on the  
external disc players being connected.  
You can select Direct File Search up to 999.  
2 Do Track/File Search  
Press the [4] or [¢] button.  
Cancelling Direct Track/File Search  
Press the [38] button.  
Fast Forwarding and Reversing  
Fast Forwarding  
Hold down toward [¢] with the Control  
knob.  
Release your finger to play the disc at that point.  
Function of disc changers with remote control  
Direct Disc Search  
Reversing  
Doing Disc Search by entering the disc number.  
Hold down toward [4] with the Control  
knob.  
Release your finger to play the disc at that point.  
1 Enter the disc number  
Press the number buttons on the remote  
control.  
There is no sound while the Audio file is being  
searched.  
You cannot fast Forwarding and Reversing depending  
on AAC file format.  
2 Do Disc Search  
Press the [+] or [] button.  
Cancelling Direct Disc Search  
Press the [38] button.  
Track/File Search  
Searching for a song on the disc or in the Audio  
file folder.  
Push the Control knob towards [4] or  
[¢].  
|
34  
English  
Track/File/Disc/Folder Repeat  
Random Play  
Replaying the song, disc in the Disc changer or  
Audio file folder you are listening to.  
Play all the songs on the disc or Audio file folder  
in random order.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Repeat" appears.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Random" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Refer to <Notes on Multi-function System> (page  
9).  
2 Turn ON/OFF the Repeat Play  
Turn the [VOL] knob to select "Repeat".  
Press the [VOL] knob.  
2 Turn ON/OFF the Random Play  
Turn the [VOL] knob to select "Random".  
Press the [VOL] knob.  
Each time you press the button, the Repeat Play  
alternates between the modes shown in the  
tables below.  
Each time you press the button, Random Play  
turns ON or OFF.  
When the Random mode is ON, "Random ON" is  
displayed.  
In CD & External disc source  
Repeat play  
Track Repeat  
Disc Repeat (In Disc Changer)  
OFF  
Display  
When you push the Control knob toward [¢], the  
next random song starts.  
"Repeat ON"/ "Track Repeat ON"  
"Disc Repeat ON"  
"Repeat OFF"  
In Audio file  
Function of disc changer  
Repeat play  
File Repeat  
Folder Repeat  
OFF  
Display  
Magazine Random Play  
"File Repeat ON"  
"Folder Repeat ON"  
"Repeat OFF"  
Play the songs on all the discs in the disc changer  
in random order.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"M.RDM" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Scan Play  
Playing the first part of each song on the disc  
or Audio file folder you are listening to and  
searching for the song you want to hear.  
2 Turning ON/OFF the Magazine Random Play  
Turn the [VOL] knob to select "M.RDM".  
Press the [VOL] knob.  
Each time you press the button, the Magazine  
Random Play turns ON or OFF.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Scan" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
When the Magazine Random mode is ON,  
"Magazine Random ON" is displayed.  
2 Start Scan Play  
Turn the [VOL] knob to select "Scan".  
Press the [VOL] knob.  
When you push the Control knob toward [¢], the  
next random song starts.  
"Scan ON"/"Track Scan ON" is displayed.  
3 Release the button when the song you want  
to hear is played  
Press the Control knob.  
English  
|
35  
CD/Audio file/External disc control features  
Function of Audio file  
Folder number display  
Displays the number in the folder belonging  
to the currently selected folder.  
Disc Random Play  
Playing randomly from all of the Audio files  
recorded in the disc.  
Folder  
2
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"Random" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
Folder name display  
Displays the current folder name.  
3 Select the folder level*  
2 Turn ON the Disc Random Play  
Turn the [VOL] knob to select "Random".  
Press the [VOL] knob for at least 1 second.  
When the random mode is ON, "Disc Random  
ON" is displayed.  
Push the Control knob towards [FM] or [AM].  
With the [AM] button, you move 1 level down  
and with the [FM] button, 1 level up.  
Selecting a folder in the same level  
Push the Control knob towards [4] or  
[¢].  
With the [4] of the Control knob, you move  
to the previous folder, and with the [¢] of the  
Control knob, to the next folder.  
Cancelling the Disc Random Play  
Turn the [VOL] knob to select "Random".  
Press the [VOL] knob.  
When you push the Control knob toward [¢], the  
next random song starts.  
Returning to the top level*  
Turn the [VOL] knob to select "Home".  
Press the [VOL] knob.  
Function of Audio file  
* You cannot operate this function when <Switching  
the Play mode> (page 37) is set to other than "Folder  
Mode" while playing ACDrive.  
Folder Select  
Quickly selecting the folder you want to hear.  
Scrolling the folder name display  
Hold down on [FM] of the Control knob for at  
least 1 second.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"F.SEL" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
4 Decide the folder to play  
Turn the [VOL] knob to select "OK".  
Press the [VOL] knob.  
The Folder Select mode releases, and the Audio  
file in the folder being displayed plays.  
The Folder Select does not function when <Disc  
Random Play> (page 36) is ON.  
Cancelling the Folder Select mode  
Turn the [VOL] knob to select "EXIT".  
Press the [VOL] knob.  
2 Enter Folder Select mode  
Turn the [VOL] knob to select "F.SEL".  
Press the [VOL] knob.  
During Select mode the folder information is  
displayed as shown below.  
|
36  
English  
Function of ACDrive disc  
Function of the ACDrive disc  
Switching the Play mode  
Letter Seek  
Arrange the playing orders of the songs by  
categories.  
You can search for the song, you want to play, by  
selecting the initial of Genre name, Artist name,  
or Album name.  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"S.Mode" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
1 Show the Multi-function display  
Press the [NEXT] button repeatedly until  
"S.Mode" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
2 Select the Play mode  
Turn the [VOL] knob to select "S.Mode".  
Press the [VOL] knob.  
Each time you press the button, the Play mode  
alternates between the modes shown on the  
table below.  
2 Enter the Letter Seek mode  
Turn the [VOL] knob to select "S.Mode".  
Press the [VOL] knob for at least 1 second.  
This operation does not function when <Disc Random  
Play> (page 36) is ON.  
This function is available only when the Play mode is  
set Genre, Artist, or Album.  
The Play mode indicator is ON.  
Play mode  
Category which is to be arranged  
"PlayList Mode" Play list order.  
"Genre Mode" By genre.  
Cancelling the Letter Seek  
Press the [VOL] knob.  
"Artist Mode"  
By artist.  
"Album Mode" By album.  
3 Start the Letter Seek  
"Folder Mode" By the folder recorded in Disc.  
Push the Control knob towards [4] or  
[¢].  
The initial of Genre name, Artist name, or Album  
name is displayed and announced in order.  
The category information of each song is the data  
registered in Media Manager when ACDrive disc is  
being generated.  
You can cancel the announcement made when the  
mode is changed by <Voice Index> (page 51).  
You can select the advancement of the Play mode  
information by [AM] and [FM] keys.  
The announcement of the initial can be canceled by  
<Voice Index> (page51).  
When you push the Control knob to the reverse [4]  
or [¢] during Letter Seek, the initial is displayed  
and announced in the reversed order.  
Once Letter Seek starts, it cannot be cancelled.  
4 Select the song to play  
Press the Control knob when the initial of  
the song you are searching is displayed and  
announced.  
The selected initial group plays.  
Text/Title Scroll  
Scrolling the displayed CD text, Audio file text, or  
MD title.  
Push the Control knob toward [FM] for at  
least 1 second.  
English  
|
37  
SIRIUS tuner control features  
NEXT  
VOL  
AUTO  
SRC  
Control knob  
Band display  
Channel number  
1
2
3
4
5
6
SIRIUS  
SR1-1ch  
CH-200  
ChanneName  
Categoy Name  
Preset station number  
Select SIRIUS Satellite Radio Mode  
Switching Seek Mode  
Selecting the SIRIUS Satellite Radio Tuner  
(optional accessory) connected to this unit.  
Sets the seeking mode.  
Press the [AUTO] button.  
Each time you press the button, the Seek mode  
alternates between the operations shown in the  
table below.  
Selecting SIRIUS Mode  
Press the [SRC] button.  
Select the "SIRIUS" display.  
Display  
Operation  
"Seek Mode: Channel" Normal manual seeking control.  
"Seek Mode: Preset" Search in order of the channels in the Preset  
memory.  
You need to subscribe to SIRIUS to receive the service  
by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-  
539-SIRIUS TO SUBSCRIBE" appears.  
The radio may take a little time to start receiving after  
you select the SIRIUS source.  
If the signal reception fails, "Acquiring Signal" appears.  
Select the channel  
Selecting the channel.  
Push the Control knob towards [4] or  
[¢].  
|
38  
English  
Category and Channel Search  
Selecting the channel and category you want to  
receive.  
If you make no button operation for 10 seconds, the  
Direct Access Tuning mode is automatically canceled.  
You can set up until Channel number 223.  
If there is no signal in the input Channel, "No Channel"  
appears. (KTC-SR901: optional accessory)  
1 Enter Category and Channel Search mode  
Press the Control knob.  
You cannot search for a channel number which is not  
broadcasting.  
(KTC-SR902/KTC-SR903: optional accessory)  
If you cannot receive any signal in the input Channel  
due to bad conditions on radio wave or other such  
problems, "Acquiring Signal" appears.  
It takes several seconds until categories appear.  
2 Select the Category  
Push the Control knob towards [FM] or [AM].  
Show the category you want to select in the  
second row. In the first and third rows, show the  
categories preceding and following the category  
you want to select.  
3 Select the Channel  
Push the Control knob towards [4] or  
[¢].  
Selecting the Preset Band  
Push the Control knob toward [FM].  
Each time you push the knob, the preset band  
alternates between the SR1, SR2, SR3 and SR4.  
You cannot Channel search until the category  
information is acquired.  
Cancelling Category and Channel Search  
mode  
Press the Control knob.  
Function of remote control  
Direct Access Tuning  
Entering the channel and tuning.  
1 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote  
control.  
2 Enter the channel  
Press the number buttons.  
3 Do Channel Search  
Push the Control knob towards [4] or  
[¢].  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
English  
|
39  
SIRIUS tuner control features  
Channel Preset Memory  
Preset Tuning  
Putting the channel in the memory.  
Recalling the channels in the memory.  
1 Select the preset band  
Push the Control knob toward [FM].  
1 Select the preset band  
Push the Control knob toward [FM].  
2 Select the channel to put in the memory  
Push the Control knob towards [4] or  
[¢].  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
3 Select a preset number  
Turn the [VOL] knob.  
4 Recall the channel  
Press the [VOL] knob.  
4 Select a preset number  
Turn the [VOL] knob.  
5 Put the channel in the memory  
Press the [VOL] knob for at least 2 seconds.  
The preset number display blinks 1 time.  
On each band, you can put 1 channel in the  
memory on each [1] — [6] number.  
Channel Scan  
Checks every receivable Channel for 10 seconds.  
1 Start Channel Scan  
Press the [AUTO] button for at least 2  
seconds.  
Only the channel number is stored. Category  
information is not stored.  
The channel number display blinks.  
2 Release the button when the song you want  
to hear is received  
Press the [AUTO] button for at least 2  
seconds.  
Text Scroll for SIRIUS tuner source  
Scrolls the displayed channel name and other  
items.  
Hold down on [FM] of the Control knob for at  
least 1 second.  
|
40  
English  
HD Radio control features  
SRC  
Control knob  
Band display  
Frequency display  
1
2
3
4
5
6
HD Radio  
HF1-1ch 107.7 MHz  
Station Name  
Title  
Preset station number  
ST indicator  
Tuning  
Selecting the station.  
When you connect an HD Radio, Tuner features of  
the unit are disabled and changed to HD Radio tuner  
features. A portion of the setting methods including  
the Tuning Mode will change.  
With the HD Radio tuner, you can use the similar  
functions to <Station Preset Memory>, <Auto  
Memory Entry>, and <Preset Tuning> of Tuner  
features. Refer to Tuner features for how to use the  
functions.  
1 Select HD Radio source  
Press the [SRC] button.  
Select the "HD Radio" display.  
2 Select the HD FM band  
Push the Control knob toward [FM].  
Each time you push the knob to [FM], the band  
alternates between the HF1, HF2, and HF3 bands.  
Select the HD AM band  
Push the Control knob toward [AM].  
3 Tune up or down band  
Push the Control knob towards [4] or  
[¢].  
English  
|
41  
DAB tuner control features  
NEXT  
VOL  
AUTO  
SRC  
Control knob  
Frequency display  
Band display  
ST indicator  
1
2
3
4
5
6
DAB  
DB1-1ch 1472.000MHz  
Service Label  
Dynamic Label  
Preset station number  
About DAB Tuner control  
4 Select a preset number  
Turn the [VOL] knob.  
Refer to A*1*2*3*4 group on the Instruction manual  
of DAB Tuner KTC-9090DAB (optional accessory) for  
the control method of DAB Tuner function.  
However, the following control methods of the  
function for this unit may be differed from the  
Instruction manual; therefore, refer to the following  
supplemental instruction.  
5 Put the service in the memory  
Press the [VOL] knob for at least 2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 service can be put in the  
memory on each [1] — [6] number.  
Service Preset Memory  
Recalling a Preset Service  
Recalling the services in the memory.  
1 Select the preset band  
1 Select the preset band  
Push the Control knob toward [FM].  
Push the Control knob toward [FM].  
Each time you press the button, the preset band  
switches between DB1, DB2, and DB3.  
2 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
2 Receive the service to be preset.  
3 Show the Multi-function display  
Press the [NEXT] button repeatedly until "1"  
3 Select a preset number  
Turn the [VOL] knob.  
— "6" appears.  
Refer to <Notes on Multi-function System> (page  
9).  
|
42  
English  
4 Recall the service  
2 Selecting a language  
Press the [VOL] knob.  
Push the Control knob towards [FM] or [AM].  
As for the available languages, refer to the  
instruction manual of DAB tuner for <Language  
Filter Search Mode>.  
Program Type (PTY) Function  
3 Searching by the selected program type and  
language  
Push the Control knob towards [4] or  
[¢].  
This function permits desired program types from  
within the received Ensemble to be searched and  
monitored.  
4 Exiting: Press the [AUTO] button.  
1 Enter PTY Mode  
Press the Control knob.  
"PTY Select" is displayed.  
Languages to be displayed  
Select English, French, German, Dutch, Spanish,  
Portuguese, Norwegian or Swedish in <Language  
Filter Search Mode> to display in the selected  
language. (Refer to the instruction manual of  
DAB tuner)  
This function cannot be used during the interruption  
of the announcement/ PTY Watch.  
2 Select the program type  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob, the program type  
changes.  
Refer to the instruction manual of DAB tuner for  
<Program Type Display>.  
Program Type preset  
Putting the Program Type in the Preset memory  
and quick recall.  
3 Search a service of the selected program  
type  
Push the Control knob towards [4] or  
[¢].  
When you want to search for other service, push  
[4] or [¢] of the Control knob again.  
Presetting the Program Type  
1 Select the Program Type to preset  
Refer to <Program Type (PTY) Function> (page  
43).  
2 Select a preset number  
Turn the [VOL] knob.  
If the selected program type is not found, the  
message ("No PTY", etc.) is displayed.  
When searching for a service of another program type,  
repeat procedures 2 and 3.  
3 Preset the Program Type  
Press the [VOL] knob for at least 2 seconds.  
Switching to Another Service:  
Repeat procedure 3.  
Another service of the same program type will  
be searched.  
Recalling the preset Program Type  
1 Enter PTY mode  
Refer to <Program Type (PTY) Function> (page  
43).  
Cancelling Search In the Middle:  
Press the Control knob.  
2 Select a preset number  
Turn the [VOL] knob.  
Searching by program type and  
language  
3 Recall the Program Type  
Press the [VOL] knob.  
1 Press the button while in program type  
selection mode.  
Press the [AUTO] button.  
English  
|
43  
Menu system  
VOL  
MENU  
SRC  
Control knob  
setting other items.  
Menu System  
4 Exit Menu mode  
Press the [MENU] button.  
Setting beep sound during operation, etc.  
functions.  
The Menu system basic operation method is  
explained here. The reference for the Menu items  
and their setting content is after this operation  
explanation.  
When other items --those applicable to the basic  
operation method above--are displayed, their setting  
content chart is entered. (Normally the setting listed at  
the top of the chart is the original setting.)  
Also, the explanation for items that are not applicable  
(<Manual Clock Adjustment> etc.) are entered step  
by step.  
1 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
2 Select the menu item  
Push the Control knob towards [4] or  
[¢].  
Example: When you want to set the beep sound  
select the "Beep" display.  
In Standby mode  
Security Code  
Because authorization by the Security Code is  
required when the audio unit is removed from  
the vehicle, personalizing this unit by using the  
Security Code is helpful in preventing theft.  
3 Set the menu item  
Push the Control knob towards [FM] or [AM].  
Example: When you select "Beep", each time you  
push the knob it alternates between  
"Beep: ON" or "Beep: OFF". Select 1 of  
them as the setting.  
Setup Security Code when the <Demonstration mode  
Setting> (page 52) is set as OFF.  
You can continue by returning to step 2 and  
|
44  
English  
When you activate the Security Code function, the code  
cannot be changed and the function cannot be released.  
Note, you can set the Security Code with a 4 digit  
number of your choice.  
In Standby mode  
Touch Sensor Tone  
Setting the operation check sound (beep sound)  
ON/OFF.  
1 Enter Standby  
Press the [SRC] button.  
Select the "STANDBY" display.  
Display  
"Beep: ON"  
"Beep: OFF"  
Setting  
Beep is heard.  
Beep canceled.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
When "MENU" is displayed, "Security" is also  
displayed.  
In Standby mode  
3 Enter Security Code mode  
Press the Control knob for at least 1 second.  
When "Enter" is displayed, "CODE" is also  
displayed.  
Manual Clock Adjustment  
You can do this adjustment when the <Synchronize  
Clock> (page 46) is set as OFF.  
4 Select the digits to enter  
Push the Control knob towards [4] or  
[¢].  
1 Select Clock Adjustment mode  
Push the Control knob towards [4] or  
[¢].  
5 Select the Security Code numbers  
Push the Control knob towards [FM] or [AM].  
Select the "Clock Adjust" display.  
6 Repeat steps 4 and 5, and complete the  
2 Enter Clock Adjust mode  
Security Code.  
Press the Control knob for at least 1 second.  
The clock display blinks.  
7 Confirm the Security Code  
Press the Control knob for at least 3 seconds.  
When "Re-Enter" is displayed, "CODE" is also  
displayed.  
3 Adjust the hours  
Push the Control knob towards [FM] or [AM].  
Adjust the minutes  
8 Do the step 4 through 7 operation, and  
reenter the Security Code.  
"Appoved" is displayed.  
Push the Control knob towards [4] or  
[¢].  
4 Exit Clock adjustment mode  
Press the [MENU] button.  
The Security Code function activates.  
If you enter the wrong Code in steps 4 through 6,  
repeat from step 4.  
9 Exit Security Code mode  
Press the [MENU] button.  
Press the Reset button when the audio unit is  
removed from the battery power source  
1 Turn the power ON.  
2 Do the step 4 through 7 operation, and enter  
the Security Code.  
"Appoved" is displayed.  
You can being using the unit.  
English  
|
45  
Menu system  
In Standby mode  
In Standby mode  
Date Adjustment  
Synchronize Clock  
Synchronizing the RDS station time data and this  
unit’s clock.  
1 Select Date Adjust mode  
Push the Control knob towards [4] or  
[¢].  
Display  
Setting  
Select the "Date Adjust" display.  
"SYNC: OFF"  
"SYNC: ON"  
Adjust the time manually.  
Synchronizes the time.  
2 Enter Date Adjust mode  
Press the Control knob for at least 1 second.  
The date display blinks.  
It takes 3 to 4 minutes to synchronize the clock.  
3 Selecting the item (day, month, or year) to  
adjust  
Push the Control knob towards [4] or  
[¢].  
In Standby mode  
The items that are blinking are items that you  
can adjust.  
DSI (Disabled System Indicator)  
A red indicator will blink on the unit after the  
faceplate is removed, warning potential thieves.  
4 Adjust each item  
Push the Control knob towards [FM] or [AM].  
Display  
"DSI: ON"  
"DSI: OFF"  
Setting  
LED flashes.  
LED OFF.  
5 Repeat step 3 and 4 operation and adjust the  
date.  
6 Exit Date adjustment mode  
Press the [MENU] button.  
In Standby mode  
Selectable Illumination  
In Standby mode  
Date Mode  
Selecting the button illumination color as green  
or red.  
Setting the date format.  
Display  
"Button: Red"  
"Button: Green"  
Setting  
The illumination color is red.  
The illumination color is green.  
1 Select Date Mode  
Push the Control knob towards [4] or  
[¢].  
Select the "Date Mode" display.  
2 Select the date format  
Push the Control knob towards [FM] or [AM].  
You can change the illumination color of [EJECT],  
[NEXT], [AUTO], and [ATT] buttons.  
3 Exit Menu mode  
Press the [MENU] button.  
In Standby mode  
Dimmer  
Dimming this unit’s display automatically when  
the vehicle light switch is turned ON.  
Display  
Setting  
"Dimmer: ON"  
"Dimmer: OFF"  
The display dims.  
The display doesn’t dim.  
|
46  
English  
In Standby mode  
In Standby mode  
Contrast Adjustment  
G-Counter Level set  
Adjusting the display contrast.  
Calibrating G-Point. Setting the level according to  
the kinds of vehicles.  
Display and Setting  
"Contrast: 1"  
Display  
Setting  
"G-Counter: Level 1"  
"G-Counter: Level 2"  
"G-Counter: Level 3"  
Counter is easy to go up.  
"Contrast: 4" (Original setting)  
Counter is hard to go up.  
In Standby mode  
In the case of driving situations calling for few  
accelerations, set the G-Point up to "G-Counter: Level  
1". In the case of frequent accelerations, set it up to "G-  
Counter: Level 3".  
Display-reversing Setting  
If no operation is performed for a predetermined  
period of time, switching between negative and  
positive display modes takes place automatically.  
Display-reversing maintains the initial brightness  
of the display for a long period of time.  
In Standby mode  
G-Analyzer Reset  
Display  
Setting  
"Display N/P: Auto"  
"Display N/P: POSI"  
Auto reverse display  
Positive display only  
Resets the value of G-Meter and G-Counter.  
1 Select G-Analyzer Reset mode  
Push the Control knob towards [4] or  
[¢].  
Switching between negative and positive display may  
not take place depending on the displayed mode.  
Select the "G-Reset" display.  
2 Enter G-Analyzer Reset mode  
Press the Control knob for at least 1 second.  
In Standby mode  
3 Select the Reset item  
Push the Control knob towards [FM] or [AM].  
"G-Meter Reset": Reset the value of G-Meter.  
"G-Counter Reset": Reset the value of G-Counter.  
Built-in Amp Setting  
Controlling the built-in amplifier.  
Turning OFF this control enhances the preout  
quality.  
4 Reset the value  
Press the Control knob for at least 2 seconds.  
"Reset OK" is displayed.  
Display  
"AMP: ON"  
"AMP: OFF"  
Setting  
The built-in amplifier activates.  
The built-in amplifier deactivates.  
5 Exit G-Analyzer Reset mode  
Press the [MENU] button.  
English  
|
47  
Menu system  
In Standby mode  
Select the "Stop Watch" display.  
G-Analyzer Calibration setup  
2 Enter G-Analyzer Stop Watch mode  
Press the Control knob for at least 1 second.  
"Stop" is displayed.  
G-Analyzer requires calibration for horizontal  
acceleration and braking.  
3 Enter Counter Ready mode  
Press the Control knob.  
"Ready" is displayed.  
Detection of horizontal and straight directions should  
be done at horizontal location going straight.  
4 Start Count  
1 Park the vehicle in a horizontal location  
When G in the vertical direction is detected  
during the travel, the count automatically starts.  
"Running" is displayed.  
2 Select G-Analyzer Calibration setup mode  
Push the Control knob towards [4] or  
[¢].  
Select the "G-Calibration" display.  
You can also start the counter by pressing the Control  
knob.  
3 Enter G-Analyzer Calibration setup mode  
Press the Control knob for at least 1 second.  
"Stop" is displayed.  
5 Stop Count  
Press the Control knob.  
"Stop" is displayed.  
4 Start Calibration of horizontal direction  
Press the Control knob.  
Once "Move Forward" appears on the display, the  
vehicle must be advanced.  
The control will start again when you accelerate or  
press the Control knob.  
Do the operation after step3.  
5 Start Calibration of straight direction  
When the vehicle is driven in the straight  
direction, calibration of straight direction  
automatically starts.  
When you Reset the Count  
(While "Stop" is displayed)  
Press the Control knob for at least 2 seconds.  
In order to operate the detection of straight direction.  
You can reset of count when the count is stopped.  
When the Calibration is finished, "Calibration OK"  
is displayed.  
6 Exit G-Analyzer Stop Watch mode  
Press the [MENU] button.  
If you fail to complete the calibraton, "No Calibration"  
is displayed. In such a case, repeat steps 1 thru 6.  
When "Running" is displayed (counted), the count is  
continued even though G-Analyzer Stop Watch mode  
is finished. If you want to stop the count, enter the  
menu mode then press the control knob.  
When Power off (ex; ACC OFF) while counting, the  
value of 1 second or less will be "00".  
6 Exit G-Analyzer Calibration setup mode  
Press the [MENU] button.  
G-Analyzer Stop Watch  
The control of stop watch can be started by G-  
Analyzer function.  
Other than Standby mode/  
When the Dual Zone System is ON  
Dual Zone System Setting  
Do not use G-Analyzer stop watch on the Public roads.  
Setting the Front channel and Rear channel  
sound in the Dual Zone System.  
1 Select G-Analyzer Stop Watch mode  
Push the Control knob towards [4] or  
[¢].  
|
48  
English  
Display  
Setting  
"Zone2: Rear"  
Sub source (Auxiliary input source) is to be rear  
channel.  
Strong electrical fields (such as from power lines) may  
cause unstable sound quality when CRSC is turned  
ON. In such a situation, turn it OFF.  
"Zone2: Front" Sub source (Auxiliary input source) is to be front  
channel.  
In HD Radio mode  
Traffic Information  
Receive mode Setting  
Switching to traffic information automatically  
when a traffic bulletin starts even when you aren’t  
listening to the radio.  
Sets the receive mode.  
1 Select the Receive mode  
Push the Control knob towards [4] or  
[¢].  
Display  
"TI: OFF"  
"TI: ON"  
Setting  
The Traffic Information function is OFF.  
The Traffic Information function is ON.  
Select the "Receive Mode" display.  
2 Enter Receive mode  
Press the Control knob for at least 1 second.  
When a traffic bulletin starts, "Traffic INFO" is  
displayed it and it switches to traffic information.  
3 Set the Receive mode  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob, the Receive mode  
alternates between the modes shown in the  
table below.  
During reception of an AM station when the Traffic  
Information function is turned ON, it switches to an  
FM station.  
During reception of traffic information the adjusted  
volume is automatically remembered, and the next  
time it switches to traffic information it’s automatically  
the remembered volume.  
Receive mode Display  
Operation  
Auto mode  
"Auto"  
Analog broadcasts and digital  
broadcasts will be switched  
automatically.  
Receiving other traffic information stations  
(In tuner source)  
Push the Control knob towards [4] or  
[¢].  
When both are being transmitted,  
the digital broadcast will have  
priority.  
Digital  
Analog  
"Digital"  
"Analog"  
Digital broadcasts only.  
Analog broadcasts only.  
You can change the traffic information station when  
listening to the radio.  
4 Exit Receive mode  
Press the [MENU] button.  
Even if the Receive mode is set to "Auto", when the  
Ball game mode program (non-delayed broadcast  
program) is received, the Receive mode will  
automatically switch to Analog broadcast only.  
In FM reception  
CRSC (Clean Reception System  
Circuit)  
Temporarily have reception alternate from  
stereo to mono to reduce multi-path noise when  
listening to the FM station.  
Display  
Setting  
"CRSC: ON"  
"CRSC: OFF"  
The CRSC is ON.  
The CRSC is OFF.  
English  
|
49  
Menu system  
In SIRIUS tuner source  
6 Exit Menu mode  
Press the [MENU] button.  
SIRIUS ID (ESN) display  
Displaying the SIRIUS ID (Electronic Serial  
Number)  
When operation stops for 10 seconds, the name at  
that time is registered, and the Menu mode closes.  
The Auxiliary Input Display can be set only when the  
built-in auxiliary input or the auxiliary input of optional  
KCA-S210A is used.  
Display  
"ESN = ************"  
Serial & SIRIUS ID (ESN)  
It is important to retain the unit serial number and  
the electronic SIRIUS Identification number for service  
activation and potential service changes.  
Text Scroll  
Setting the displayed text scroll.  
Display  
Setting  
"Scroll: Auto"  
"Scroll: Manual"  
Repeats scroll.  
Scrolls when the display changes.  
Auxiliary Input Display Setting &  
Station/Disc Naming  
Selecting the display when changing to Auxiliary  
input source. For the Station/Disc Naming refer to  
the <Station/Disc Naming (SNPS/DNPS)> (page  
28).  
The text scrolled is listed below.  
- CD text  
- Folder name/ File name/ Song title/ Artist name/  
Album name  
1 Select Auxiliary input source  
Press the [SRC] button.  
Select the "AUX"/ "AUX EXT" display.  
- MD title  
- Radio text  
- Text for the SIRIUS tuner source, including Channel  
name, etc.  
- Title for HD Radio source  
- Dynamic Lable for the DAB tuner source  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
3 Select Auxiliary input display setting mode  
Push the Control knob towards [4] or  
[¢].  
In Standby mode  
Built-in Auxiliary input Setting  
Select the "Name Set" display.  
Set the Built-in Auxiliary Input function.  
4 Enter Auxiliary input display setting mode  
Press the Control knob for at least 1 second.  
The presently selected Auxiliary input display is  
displayed.  
Display  
Setting  
"Built in AUX: OFF" When selecting the source there’s no Auxiliary  
Input.  
"Built in AUX: ON" When selecting the source there’s Auxiliary Input.  
5 Select the Auxiliary input display  
Push the Control knob towards [4] or  
[¢].  
Each time you press the button, the display  
alternates as listed below.  
• "AUX"/ "AUX EXT"  
• "DVD"  
• "Portable"  
• "Game"  
• "Video"  
• "TV"  
|
50  
English  
In Standby mode  
When the downloading finishes, "Finished  
Download" is displayed.  
CD Read Setting  
When there is a problem with playing a CD with  
special format, this setting plays the CD by force.  
Picture downloading may take as long as 20 minutes.  
Quantity Gradation Level  
Display  
Setting  
"CD Read: 1"  
"CD Read: 2"  
Play CD and Audio file.  
Play CD by force.  
Setting "CD Read: 2" cannot play Audio file.  
Some music CDs may not play even in the "CD Read:  
2" mode.  
Cancelling Downloading  
Press the [MENU] button.  
8 Exit the downloading mode  
Press the [MENU] button.  
In Standby mode  
Picture downloading  
Do not operate this unit,while "Downloading" is  
displayed to prevent data from being damaged.  
The number of files that can be downloaded.  
- Wallpaper: 1 file  
When a new wallpaper is downloaded, it will  
overwritte the currently downloaded wallpaper.  
There is no way to delete the downloaded pictures.  
The downloaded pictures can be used for display.  
<Graphic part/ Spectrum Analyzer Display Switching>  
(page 18)  
Downloading wallpapers. You can use  
downloaded pictures for the display of this unit.  
1 Inset a CD-R/CD-RW.  
Insert a CD-R/CD-RW containing files to be  
downloaded into this unit.  
Refer to <Playing CD & Audio file> (page 33) for  
details.  
describes how to make CD-R/CD-RW.  
<Wallpaper selecting> (page 19)  
When you cannot download the pictures to this unit,  
there may be a problem with the CD-R/CD-RW write  
method.  
Refer to the URL http://www.kenwood.net-disp.com,  
and rewrite the CD-R/CD-RW.  
2 Enter Standby  
Press the [SRC] button.  
Select the "STANDBY" display.  
3 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
4 Select the downloading mode  
Push the Control knob towards [4] or  
[¢].  
Function of ACDrive disc  
Voice Index  
Select the "DISP Data Download" display.  
Setting the announcement during the play of  
ACDrive disc.  
5 Enter the downloading mode  
Press the Control knob for at least 1 second.  
"File Check!!" is displayed.  
Display  
Setting  
"Voice Index: ON"  
"Voice Index: OFF"  
Guide is announced.  
Not be announced.  
6 Select files to be downloaded  
Push the Control knob towards [4] or  
[¢].  
7 Start downloading  
Press the Control knob for at least 1 second.  
"Downloading" is displayed.  
English  
|
51  
Menu system  
In CD mode  
In DAB mode  
ACDrive firmware version display  
Menu Added for DAB  
Displaying the firmware version with the ACDrive  
function.  
When you connect the DAB tuner, the following  
menu is displayed:  
1 Select the firmware version display mode  
Push the Control knob towards [4] or  
[¢].  
Display  
"DRC:"  
"Regional ASW:"  
"ASW Select"  
"PTY Watch"  
"Language Search"  
Feature  
Dynamic Range Control (DRC)  
Regional Announcement Function  
Announcement select mode  
PTY Watch Select Mode  
Language Filter Search Mode  
Select the "ACD F/W Version" display.  
2 Display the ACDrive firmware version  
Push the Control knob towards [FM] or [AM].  
For details on menu items, refer to the instruction  
manual of the DAB tuner.  
In CD mode  
Unique ID display  
Displaying the serial number for each product.  
1 Select the unique ID display mode  
Push the Control knob towards [4] or  
[¢].  
Select the "ACD Unique ID" display.  
2 Display the unique ID  
Push the Control knob towards [FM] or [AM].  
In Standby mode  
Demonstration mode Setting  
Sets the demonstration mode.  
1 Select the Demonstration mode  
Push the Control knob towards [4] or  
[¢].  
Select the "DEMO Mode" display.  
2 Set the Demonstration mode  
Press the Control knob for at least 2 seconds.  
Each time you press the knob at least 2 seconds,  
the Demonstration mode alternates between the  
settings shown in the table below.  
Display  
Setting  
"DEMO Mode: ON"  
"DEMO Mode: OFF"  
The Demonstration mode function is ON.  
Exit Demonstration mode (Normal mode).  
|
52  
English  
Basic Operations of remote control  
43$  
"55  
70-  
32#  
!4 4  
6/,  
ꢀꢁ  
!5$  
"6%  
ꢀꢁ  
&-  
D
D  
!-n  
ꢁꢂ:/.%  
!"#  
'.ꢀ".ꢀo  
$)2%#4  
ꢀ/+  
%*3&$5  
$%&  
-./  
789  
'()  
*+,  
023  
456  
1:  
2ꢃ6/,  
Loading and Replacing the battery  
Basic operations  
Use two "AA"-size batteries.  
Slide the cover while pressing downwards to  
remove it as illustrated.  
Insert the batteries with the + and – poles aligned  
properly, following the illustration inside the case.  
[VOL] buttons  
Adjusts the volume.  
[SRC] button  
Each time you press the button, the source  
alternates.  
For the source alternating order refer to  
<Selecting the Source> (page 10).  
[ATT] button  
Turns the volume down quickly.  
When the button is pressed again, the volume  
returns to the previous level.  
[
] button  
Adjusts the Faceplate Angle.  
2WARNING  
Store unused batteries out of the reach of children.  
Contact a doctor immediately if the battery is  
accidentally swallowed.  
Do not set the remote control in hot places such as  
above the dashboard.  
English  
|
53  
Basic Operations of remote control  
Audio Control  
In Disc source  
[AUD] button  
Selects the Audio item to be adjusted.  
[4]/ [¢] buttons  
Going forwards and backwards between track/  
files.  
[VOL] buttons  
Adjusts the Audio item.  
[+]/ [] buttons  
Going forwards and backwards between disc/  
folders.  
Refer to <Audio Control> (page 11) for the operation  
method, such as the procedures for Audio control and  
others operations.  
The remote control can only select and adjust the  
Basic Audio item. Selecting and adjusting of the Detail  
Audio item cannot be done.  
[38] button  
Each time you press the button, the song pauses  
or plays.  
[0] — [9] buttons  
When in <Direct Track/File Search> (page 34) and  
<Direct Disc Search> (page 34), enters the track/  
file/disc number.  
Dual Zone System  
[2-ZONE] button  
Each time you press the button, "2ZONE" of  
<Audio Setup> (page 11) is turned ON or OFF.  
In SIRIUS tuner source  
[FM] button  
Selects the preset band.  
[5]/ [] buttons  
Adjusts the volume of the rear channel.  
The rear channel activates while the Dual Zone  
System is ON.  
[4]/ [¢] buttons  
Searches up or down channels.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset channels.  
[DIRECT] button  
In Tuner source  
Enters and cancels the <Direct Access Tuning>  
(page 39) mode.  
[FM]/ [AM] buttons  
Selects the band.  
[38] button  
Enters and cancels the <Category and Channel  
Search> (page 39) mode.  
Each time you press the [FM] button, the band  
alternates between the FM1, FM2, and FM3  
bands.  
[4]/ [¢] buttons  
Tune up or down band.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset stations.  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning>  
(page 30) mode.  
[38] button  
Enters and cancels the <PTY (Program Type)>  
(page 32) mode.  
|
54  
English  
In HD Radio source  
[FM] button  
Selects the HD FM band.  
Each time you press the [FM] button, the band  
alternates between the HF1, HF2, and HF3 bands.  
[AM] button  
Selects the HD AM band.  
[4]/ [¢] buttons  
Tunes up or down bands.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset stations.  
In DAB source  
[FM] button  
Preset Band Switching.  
Each press of the [FM] button switches one step  
among the DB1, DB2, and DB3 bands.  
[AM] button  
Primary/Secondary Switching.  
Each press of the [AM] button switches between  
Primary/secondary within the services.  
[4]/ [¢] buttons  
Service Switching.  
Each press of the button switches the services  
from within the Ensemble.  
Switching the ensemble.  
Each time the button is pressed and held for  
longer than 1 seconds, the Ensemble changes.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset services.  
English  
|
55  
Accessories/ Installation Procedure  
Accessories  
2WARNING  
If you connect the ignition wire (red) and the battery wire  
(yellow) to the car chassis (ground), you may cause a short  
circuit, that in turn may start a fire. Always connect the  
ignition and battery wires to the power source running  
through the fuse box.  
1
..........1  
..........2  
..........4  
..........4  
..........1  
If the power is not turned ON (or it is ON, but will be OFF  
immediately), the speaker wire may have a short-circuit  
or touched the chasis of the vehicle and the protection  
function may have been activated. Therefore, check the  
speaker wire.  
If your car’s ignition does not have an ACC position,  
connect the ignition wires to a power source that can be  
turned on and off with the ignition key. If you connect  
the ignition wire to a power source with a constant  
voltage supply, as with battery wires, the battery may die.  
If the console has a lid, make sure to install the unit so  
that the faceplate will not hit the lid when closing and  
opening.  
If the fuse blows, first make sure the wires aren’t touching  
to cause a short circuit, then replace the old fuse with  
one with the same rating.  
Insulate unconnected wires with vinyl tape or other  
similar material. To prevent a short circuit, do not remove  
the caps on the ends of the unconnected wires or the  
terminals.  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may be damaged or fail  
to work if you share the - wires or ground them to any  
metal part in the car.  
When only two speakers are being connected to the  
system, connect the connectors either to both the front  
output terminals or to both the rear output terminals  
(do not mix front and rear). For example, if you connect  
the + connector of the left speaker to a front output  
terminal, do not connect the - connector to a rear  
output terminal.  
2
3
4
5
After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
Mount the unit so that the mounting angle is 30° or less.  
Installation Procedure  
1. To prevent a short circuit, remove the key from  
the ignition and disconnect the - battery.  
2. Connect the proper input and output wire to  
each unit.  
3. Connect the speaker wires of the wiring harness.  
4. Connect the wiring harness wires in the  
following order: ground, battery, ignition.  
5. Connect the wiring harness connector to the  
unit.  
6. Install the unit in your car.  
7. Reconnect the - battery.  
8. Press the reset button.  
|
56  
English  
Connecting Wires to Terminals  
Subwoofer right output (Red)  
Subwoofer left output (White)  
-1  
7""ꢀꢂ,  
Rear right output (Red)  
Rear left output (White)  
Front right output (Red)  
Front left output (White)  
,ꢂꢃ,  
To KENWOOD disc changer/  
External optional accessory  
ꢀ," /  
To connect these leads, refer to the  
relevant instruction manuals.  
AUX right input (Red)  
AUX left input (White)  
ꢃ18Êꢄ  
Wiring harness  
(Accessory1)  
FM/AM antenna input  
Fuse (10A)  
If no connections are made, do not let the wire come out from the tab.  
When using the optional power amplifier, connect to its power  
*°ꢁ" /  
control terminal.  
Power control wire (Blue/White)  
Depending on what antenna you are using, connect either to the  
control terminal of the motor antenna, or to the power terminal for  
the booster amplifier of the film-type antenna.  
ꢀ /°  
ÊÊÊꢁ" /  
Motor antenna control wire  
(Blue)  
Connect to the terminal that is grounded when either the telephone  
rings or during conversation.  
Êꢂ1/ꢃ  
TEL mute wire (Brown)  
To connect the KENWOOD navigation system, consult your  
navigation manual.  
To car light control switch  
To front left speaker  
Dimmer control wire  
(Orange / White)  
White/Black  
White  
ꢀ," /ÊUÊꢁ  
To front right speaker  
Gray/Black  
Gray  
ꢀ," /ÊUÊ,  
,ꢂꢃ,ÊUÊꢁ  
,ꢂꢃ,ÊUÊ,  
Green/Black  
Green  
To rear left speaker  
To rear right speaker  
Purple/Black  
Purple  
Ignition key  
switch  
Car fuse box  
ACC  
Ignition wire (Red)  
Car fuse box  
(Main fuse)  
Battery wire (Yellow)  
Ground wire (Black) · (To car chassis)  
q
³
Battery  
English  
|
57  
Installation  
non-Japanese cars  
Japanese cars  
1 Refer to the section <Removing the hard rubber  
frame> (page 60) and then remove the hard  
rubber frame.  
2 Align the holes in the unit (two locations on each  
side) with the vehicle mounting bracket and  
secure the unit with the accessory screws.  
Metal mounting strap  
(commercially available)  
Firewall or metal support  
T
N
T/N  
T
N
Bend the tabs of the  
T: Toyota cars  
N: Nissan cars  
mounting sleeve with a  
screwdriver or similar utensil  
and attach it in place.  
8 mm  
MAX.  
Self-tapping screw  
(commercially available)  
8 mm  
MAX.  
3
4
M5mm  
M5mm  
Screw (M4X8)  
(commercially available)  
Accessory3 ...for Nissan car  
Accessory4 ...for Toyota car  
Make sure that the unit is installed securely in place. If  
the unit is unstable, it may malfunction (for example, the  
sound may skip).  
During installation, do not use any screws except for  
those provided. The use of different screws might result  
in damage to the main unit.  
Damage may occur if a screwdriver or similar tool is used  
with excessive force during the installations.  
|
58  
English  
Screwing the Faceplate on the Unit  
If you want to fasten the faceplate to the main  
unit so that it does not fall off, screw in the  
provided screws in the holes shown below.  
Bottom panel  
Accessory5  
Never insert the screw in any other screw hole than the  
one specified. If you screw them in another hole, it will  
contact and may cause damage to the mechanical parts  
inside the unit.  
English  
|
59  
Removing the Unit  
Removing the hard rubber frame  
Removing the Unit  
1 Engage the catch pins on the removal tool and  
remove the two locks on the upper level.  
Upper the frame and pull it forward as shown in  
the figure.  
1 Refer to the section <Removing the hard rubber  
frame> (page 60) and then remove the hard  
rubber frame.  
2 Remove the screw (M4 × 8) on the back panel.  
3 Insert the two removal tools deeply into the slots  
on each side, as shown.  
Screw (M4X8)  
(commercially available)  
Lock  
Catch  
Accessory2  
Removal tool  
2 When the upper level is removed, remove the  
lower two locations.  
Accessory2  
Removal tool  
4 Lower the removal tool toward the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
The frame can be removed from the bottom side in the  
same manner.  
Be careful to avoid injury from the catch pins on the  
removal tool.  
5 Pull the unit all the way out with your hands,  
being careful not to drop it.  
|
60  
English  
Troubleshooting Guide  
What may seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
? No sound can be heard, or the volume is low.  
The fader or balance settings are set all the way to  
one side.  
Center the fader and balance settings.  
The input/output wires or wiring harness are  
connected incorrectly.  
Reconnect the input/output wires or the  
wiring harness correctly. See the section on  
<Connecting Wires to Terminals>.  
General  
? The power does not turn ON.  
The fuse has blown.  
The values of Volume offset are low.  
After checking for short circuits in the wires,  
replace the fuse with a new one with the  
same rating.  
Turn up the Volume offset, referring to the  
section on <Audio Control> (page 11).  
The <Built-in Amp Setting> (page 47) is OFF.  
Turn it ON.  
The speaker wire has a short-circuit or touches the  
chassis of the vehicle, and the protection function  
is activated.  
? The sound quality is poor or distorted.  
One of the speaker wires is being pinched by a  
screw in the car.  
Wire or insulate the speaker cable properly  
and press the reset button.  
Check the speaker wiring.  
? There is a source you cannot change.  
The speakers are not wired correctly.  
There is no media inserted.  
Reconnect the speaker wires so that each  
output terminal is connected to a different  
speaker.  
Set the media you want to hear. If there is no  
media in this unit, you cannot change to each  
source.  
? The Touch Sensor Tone does not sound.  
The preout jack is being used.  
The Disc changer is not connected.  
Connect the Disc changer. If the Disc changer  
is not connected to it’s input terminal, You  
cannot change to an external disc source.  
The Touch Sensor Tone cannot be output from  
the preout jack.  
? Even though Synchronize Clock is ON, the clock  
cannot be adjusted.  
? The memory is erased when the ignition is  
turned OFF.  
The received RDS station is not sending time data.  
The ignition and battery wire are incorrectly  
Receive another RDS station.  
connected.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
? The Dimmer function does not work.  
The Dimmer wire is not connected correctly.  
Check the Dimmer wire connection.  
The <Dimmer> (page 46) is OFF.  
Turn it ON.  
? The TEL mute function does not work.  
The TEL mute wire is not connected properly.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
? The sound is not output from Subwoofer or it  
outputs a different sound.  
? The TEL mute function turns ON even though the  
TEL mute wire is not connected.  
When "2ZONE" of <Audio Setup> (page11) is set  
to ON.  
The TEL mute wire is touching a metal part of the  
car.  
Turn OFF "2ZONE" of <Audio Setup>.  
Pull the TEL mute wire away from the metal  
part of the car.  
? There are no audio control effects.  
FOCUS/ SRS 3D item on <WOW Control> (page  
15) have no effect in rear output.  
---  
? Switching between negative and positive display  
modes takes place automatically.  
Switching between negative and positive display  
modes takes place automatically to maintain the  
initial brightness of the display for a long period of  
time.  
You can select "Display N/P: POSI" as  
mentioned in <Display-reversing Setting>  
(page 47).  
English  
|
61  
Troubleshooting Guide  
Tuner source  
? The disc will not insert.  
There is already another disc inserted.  
Press the [0] button and remove the disc.  
? Radio reception is poor.  
The car antenna is not extended.  
Pull the antenna out all the way.  
? Direct Search cannot be done.  
Another function is ON.  
Turn Random Play or other functions OFF.  
The antenna control wire is not connected.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
? Track Search cannot be done.  
For the discs first or last song.  
? The desired frequency cannot be entered with  
the Direct Access Tuning.  
For each disc, Track Search cannot be done in  
the backward direction for the first song or in  
the forward direction for the last song.  
A station that cannot be received is being entered.  
You are trying to enter a frequency with a 0.01  
MHz unit.  
Enter a station that can be received.  
Audio file source  
The FM band is designated to 0.1 MHz.  
? Cannot play an Audio file.  
? The volume is not the set Traffic information  
sound volume.  
The media is scratched or dirty.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
The set sound volume is less than the tuner sound  
volume.  
If the tuner sound volume is louder than the  
set sound volume,the tuner sound volume is  
used.  
? The sound skips when an Audio file is being  
played.  
The media is scratched or dirty.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
Disc source  
The recording condition is bad.  
Record the media again or use another media.  
? "AUX EXT" is displayed without achieving  
External disc control mode.  
? The Audio file track time is not displayed  
correctly.  
Unsupported disc changer is connected.  
Use the disc changer mentioned in the  
<About CD players/disc changers connected  
to this unit> (page 4) of the section on <Safety  
precautions>.  
---  
There are times when the track time is not  
displayed correctly according to the Audio file  
recording conditions.  
? The specified disc does not play, but another one  
plays instead.  
HD Radio source  
The specified CD is quite dirty.  
Clean the CD.  
? No sound can be heard, or the volume is low.  
The disc is loaded in a different slot from that  
specified.  
The preset broadcast station is not transmitting  
in the mode that was set with <Receive mode  
Setting> (page 49).  
Eject the disc magazine and check the  
number for the specified disc.  
Please set <Receive mode Setting> to "Auto".  
The disc is severely scratched.  
Try another disc instead.  
In digital AM broadcasting, receive mode  
alternates between stereo and monaural too  
often.  
? A CD ejects as soon as it is loaded.  
The CD is quite dirty.  
Receiving condition is bad or unstable. Stereo  
is chosen when receiving condition is good,  
and the tuner alternates to monaural when  
the condition becomes bad.  
Clean the CD, referring to the CD cleaning of  
the section on <About CDs> (page 7).  
HD Radio tuner is connected to KCA-S210A or  
other units.  
? Can’t remove disc.  
The cause is that more than 10 minutes has  
Connect the HD Radio tuner directly to the  
control unit.  
elapsed since the vehicle ACC switch was turned  
OFF.  
The disc can only be removed within 10  
minutes of the ACC switch being turned OFF.  
If more than 10 minutes has elapsed, turn  
the ACC switch ON again and press the Eject  
button.  
|
62  
English  
Waiting:  
• Receiving radio text data.  
• Text for the SIRIUS tuner source is being  
received.  
The messages shown below display your  
systems condition.  
• Text for the DAB tuner source is being  
received.  
Eject:  
No disc magazine has been loaded in  
the changer. The disc magazine is not  
completely loaded.  
Load the disc magazine properly.  
No CD in the unit.  
Load:  
Exchanging discs in the Disc changer.  
Reading the data on the disc.  
Reading:  
IN (Blink):  
Insert the CD.  
The CD player section is not operating  
properly.  
No Disc:  
No disc has been loaded in the disc  
magazine.  
Load a disc into the disc magazine.  
Reinsert the CD. If the CD cannot be  
ejected or the display continues to flash  
even when the CD has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
TOC Error:  
No disc has been loaded in the disc  
magazine.  
Load a disc into the disc magazine.  
The CD is quite dirty. The CD is upside-  
down. The CD is very scratched.  
Clean the CD and load it correctly.  
Unsupported File:  
An Audio file with a format that this unit  
cannot support is playing.  
----  
Error 05:  
The CD is upside-down.  
Load the CD correctly.  
Copy Protection:  
A copy-protected file is playing.  
----  
Blank Disc:  
Nothing has been recorded on the MD.  
No Track Disc: No tracks are recorded on the MD,  
although it has a title.  
Can't Download:  
Download Error:  
This unit does not work properly for some  
reason.  
Press the reset button to download  
it again. If this error is still displayed,  
consult a local Kenwood dealer.  
Error 15:  
Media was played that does not have data  
recorded that the unit can play.  
Use media that has data recorded that  
the unit can play.  
No Panel:  
Error 77:  
The faceplate of the slave unit being  
connected to this unit has been removed.  
Replace it.  
No Display File: No file that can be downloaded is  
contained in the CD-ROM.  
Make sure that a files created with  
disp.com> is contained in the CD-ROM.  
Do not delete the extension (.kbm)  
created when the file was created.  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If  
the "Error 77" code does not disappear,  
consult your nearest service center.  
Mecha Error: Something is wrong with the disc  
magazine. Or the unit is malfunctioning for  
some reason.  
Incorrect File: The file selected to be downloaded has a  
format that this unit cannot read.  
Recreate the file.  
Check the disc magazine. And then  
press the reset button on the unit. If the  
"Mecha Error" code does not disappear,  
consult your nearest service center.  
Writing Error: Writing failed while the file was  
downloaded.  
Try the downloading again.  
DEMO MODE: The Demonstration mode has been  
selected.  
Hold Error:  
The protective circuit in the unit activates  
when the temperature inside the  
automatic disc changer exceeds 60°C  
(140°F), stopping all operation.  
Cool down the unit by opening  
the windows or turning on the air  
conditioner. As the temperature falls  
below 60°C (140°F), the disc will start  
playing again.  
The <Demonstration mode Setting>  
(page 52) is ON. Turn it OFF.  
English  
|
63  
Specifications  
Specifications subject to change without notice.  
FM tuner section  
Audio section  
Frequency range (200 kHz space)  
: 87.9 MHz – 107.9 MHz  
Maximum output power  
: 50 W x 4  
Usable sensitivity (S/N = 30dB)  
: 9.3dBf (0.8 µV /75 Ω)  
Full Bandwidth Power (at less than 1% THD)  
: 22 W x 4  
Quieting Sensitivity (S/N = 50dB)  
: 15.2dBf (1.6 µV /75 Ω)  
Tone action  
Band1: 60 – 200 Hz 9 dB  
Frequency response ( 3.0 dB)  
Band2: 250 – 1k Hz 9 dB  
Band3: 1.25k – 4k Hz 9 dB  
Band4: 5k – 16k Hz 9 dB  
Preout level / Load (during disc play)  
: 5000 mV/10 kΩ  
: 30 Hz – 15 kHz  
Signal to Noise ratio (MONO)  
: 70 dB  
Selectivity ( 400 kHz)  
: ≥ 80 dB  
Stereo separation (1 kHz)  
: 40 dB  
Preout impedance  
: ≤80 Ω  
Auxiliary input  
Frequency response ( 1 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
AM tuner section  
Frequency range (10 kHz space)  
: 530 kHz – 1700 kHz  
Usable sensitivity (S/N = 20dB)  
: 28 dBµ (25 µV)  
Input Impedance  
: 100 kΩ  
CD player section  
General  
Laser diode  
: GaAlAs  
Digital filter (D/A)  
: 8 Times Over Sampling  
D/A Converter  
: 1 Bit  
Spindle speed (Audio file)  
: 1000 – 400 rpm (CLV 2times)  
Wow & Flutter  
: Below Measurable Limit  
Frequency response ( 1 dB)  
: 10 Hz – 20 kHz  
Operating voltage (11 – 16V allowable)  
: 14.4 V  
Current consumption  
: 10 A  
Installation Size (W × H × D)  
: 182 × 50 × 155 mm  
7-3/16 × 2-1/16 × 6-1/10 inch  
Weight  
: 3.64 lbs (1.65 kg)  
Total harmonic distortion (1 kHz)  
: 0.008 %  
Signal to Noise ratio (1 kHz)  
: 110 dB  
Dynamic range  
: 93 dB  
Channel separation  
: 96 dB  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
AAC decode  
: AAC-LC ".m4a" files  
|
64  
English  

Rockford Fosgate FNX2405 User Manual
Raypak XTHERM 1505 User Manual
Raymarine Radar equipment Combined Pathfinder Radar User Manual
Philips SHB6101 User Manual
Motorola Cable Box DCX3200 User Manual
Leupold VX 3 User Manual
Lanzar Car Audio VCT 2410 User Manual
Kenwood KRC 218 User Manual
Kenwood KDC 7018 User Manual
Kenwood CASSETTE RECEIVER KRC PS978R User Manual