Krups IB95 User Manual

1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 1  
1 - Important safeguards  
2 - General Information  
3 - Product description  
4 - Before use  
2
4
5
6
®
5 - Using the BeerTender  
6 - Troubleshooting  
7 - Disposal  
7
11  
16  
16  
17  
8 - Consumer service  
9 - Limited warranty  
1
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 3  
CAUTION  
This appliance is for household use only. Any  
servicing other than cleaning and user maintenance  
should be performed by an authorized service  
representative.  
To reduce the risk of fire or electric shock, do not  
remove the base. No user serviceable parts  
inside. Repair should be done by authorized  
service personnel only.  
Check voltage to be sure that the voltage  
indicated on the name plate is compatible with  
your voltage.  
Never clean with scouring powders or harsh  
chemicals.  
Never make technical changes or use the  
appliance in any manner other than as directed.  
SHORT CORD  
INSTRUCTIONS  
A. We do not recommend using an extension cord  
with this device.  
B. If an extension cord is absolutely necessary :  
1 - the marked electrical rating of the  
extension cord should be at least as great as  
the electrical rating of the appliance.  
2 - To reduce the risk of injury, do not drape  
cord over the counter top or table top where  
it can be pulled on by children or tripped  
over unintentionally.  
3
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 4  
2 - General information  
®
The BeerTender is designed to dispense chilled beer in  
®
a domestic setting. Only a Heineken 5 Liter  
TM  
®
DraughtKeg and Heineken Premium Light 5 Liter  
TM  
DraughtKeg can be used with the BeerTender. You  
should not use any other commercially available beer  
containers or kegs. Do not introduce any materials other  
than the DraughtKeg inside the appliance.  
BeerTender is designed for use by responsible adults of  
legal drinking age.  
Guidelines for reading these instructions  
* The warning triangle indicates instructions that are  
important for the userʼs safety.  
* Please adhere strictly to these directions to ensure  
proper use and avoid serious injury!  
* This symbol highlights information that is especially  
important for making the best use of the machine.  
4
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 5  
3 - Product description  
BeerTender Components  
1. BeerTender at home draughting system  
2. Lid  
3. LCD Control panel  
3a. Calendar reset button  
3b. Adjustable temperature control  
4. Tap cover  
5. Press-in panel to open lid of BeerTender  
6. Dispensing pour spout  
7. Beer tap handle  
8. Drip grate  
9. Drip tray  
10. Main power switch  
11. Power cord with plug  
TM  
DraughtKeg Components  
12. 5 Liter DraughtKeg(not included)  
13. Replaceable draught beer tube (should be changed  
with each new DraughtKeg)  
5
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 6  
4 - Before use  
Child Safety Lock  
* Make sure that children can not play with the  
appliance.  
* Do not leave the materials used to pack the appliance  
within childrenʼs reach.  
* To prevent children from using the appliance, you can  
remove the tap handle. To remove the handle, make  
sure that it is in an upright position and pull upward.  
Fire prevention  
In the event of a fire, use carbon dioxide (CO2)  
extinguishers.  
Do not use water or powder extinguishers.  
Setup and Maintenance  
* Install the BeerTender® in an upright position in a safe  
place.  
* To ensure that the BeerTender works correctly and  
efficiently, the following is strongly advised:  
* Place it on a perfectly level and stable surface.*  
Choose a clean, well-lit area with an easily accessible  
electric socket.  
* Keep the appliance at a minimum distance (4 inches)  
from the stove as shown in the diagram.  
* Keep the appliance at a minimum distance  
(2 ½ inches) from the walls.  
TM  
54°F  
* Store the DraughtKeg at room temperature or in the  
refrigerator.  
86°F  
* Make sure the BeerTender is not exposed to direct  
sunlight.  
* Do not use the BeerTender outdoors.  
* Do not place the BeerTender on very hot surfaces or  
near open flames, as these may melt or damage the  
casing.  
* Your BeerTender uses a technology that delivers  
ultimate cooling results when the ambient temperature  
is between 54°F and 86°F. At colder temperatures, the  
appliance cooling system could be damaged. At  
warmer temperatures, the cooling system will not be  
able to reach the temperature you program.  
Warning! To avoid overheating, always keep the  
BeerTender appliance out of direct sunlight. To obtain  
good cooling performance, never install your machine in  
a room with an ambient temperature above 86°F.  
6
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 7  
5 - Using the BeerTender® System  
* Always hold the appliance by the bottom edge when  
lifting.  
* To obtain draught beer of optimal quality you should  
keep two basic factors in mind, the temperature of the  
beer and hygienic conditions. Follow these few simple  
steps for the ideal use of BeerTender®.  
A new draught beer tube should be used with  
TM  
each DraughtKeg  
An initial package of draught beer tube is included  
with your machine. Additional draught beer tubes  
can be ordered from Heineken. Go to  
Chilling the DraughtKeg  
1. Before pouring a draught beer, it is very important that  
the Heineken and Heineken Premium Light  
DraughtKeg reach the correct temperature.  
2. Ensure DraughtKeg is sufficiently chilled before  
pouring a draught beer. DraughtKegs will produce too  
much foam. It is ideal to purchase the DraughtKeg  
pre-chilled or pre-chill over night before intended use.  
If the DraughtKeg needs additional chilling, there are 2  
recommended options:  
a. Inside the BeerTender – Depending on the  
temperature of the DraughtKeg, it will take  
up to 18 hours to chill to the ideal serving  
temperature.  
b. In a refrigerator – Depending on the  
temperature of your refrigerator, it will take up to  
12 hours to chill to the ideal serving temperature.  
Tip: We recommend that you always keep an extra  
DraughtKeg in your refrigerator to always have a chilled  
DraughtKeg available.  
Preparing the BeerTender  
IMPORTANT: It is important that the BeerTender power  
switch is turned on before inserting the DraughtKeg. This  
allows the scale to reset and accurately measure the  
amount of beer left in the keg. If you remove a partially  
full DraughtKeg from an operating machine or open the  
lid while power is on, the scale will need to be reset.  
7
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 8  
Simply open the lid and lft up the keg for approximately  
5-10 seconds before setting back into the machine and  
closing the lid.  
* After setting up the BeerTender and before use, it is  
vital to clean the detachable pour spout – this is the  
only part of the appliance that will come into contact  
with the beer. The spout should be rinsed by hand.  
After cleaning, screw back into place.  
* Before inserting the DraughtKeg into the BeerTender,  
simply snap the patented disposable draught beer  
tube (included) onto the DraughtKeg.  
* Open the BeerTender cover by pressing in the release  
panel on the front of the machine.  
* Open the tap spout cover by turning counter  
clockwise.  
* Insert DraughtKeg into BeerTender and position the  
draught beer tube as shown on drawing.  
* Close the tap by turning clockwise and snapping into  
place.  
* Carefully close the lid.  
* Set the drip tray and grate in place at the front of the  
appliance. Make sure the drip tray is properly fitted  
and positioned.  
WARNING! The drip tray must be positioned on a level  
surface and must not jut out from the surface it is resting  
on.  
Control Panel  
* Press the “C” button on the lefthand side of the display  
42°F  
39°F  
36°F  
panel. This resets the 30 day calendar and will  
countdown from the day you reset with each new  
Draughtkeg.  
8
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 9  
* Adjust to the desired temperature by pressing the  
thermometer button on the righthand side of the  
display panel.  
* The top temperature readout reflects the  
42°F  
39°F  
36°F  
temperature inside the Draughtkeg.  
* The bottom temperature next to the thermometer  
image reflects your desired temperature.  
* Wait for your ideal temperature to be reached  
before pouring a beer.  
* Volume indicator – the barrel on the lefthand side of  
the display screen reflects the volume left in your  
DraughtKeg™.  
* There are 4 volume levels – when down to the  
bottom level, the panel will flash indicating your  
DraughtKeg is almost empty.  
* Never immerse the appliance in water.  
Pouring a beer from the BeerTender  
* Before pouring a beer, rinse clean glass in cold water  
which chills the glass and wets the inside to enable a  
perfectly smooth draught pour. Use of 8 oz glasses is  
recommended to maintain the ideal serving  
temperature.  
Draught and Drink  
* Be aware that the first glass you pour from every new  
DraughtKeg will contain mostly foam. This is typical of  
draught beer. Allow the foam to settle and continue to  
pour.  
* Tilt and pour: Tilt your glass at a 45 degree angle as  
you pour and adjust upright as the glass fills.  
* Ensure you pull the tap handle all the way down. Not  
opening the handle all the way will result in excessive  
foam.  
* For the optimal draught beer drinking experience,  
serve your beer with a foam head of 2 fingers in height  
(approximately 1.5”).  
Proper Care and Cleaning of your BeerTender  
* The drip tray and grate should be emptied and  
cleaned after each use.  
* Before cleaning the appliance, it is essential to turn off  
the main power switch and then pull the plug out of the  
socket.  
9
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 10  
* Keep in mind that during use the drip tray will  
have to be emptied and rinsed regularly. The tray  
and grate are dishwasher safe or can be washed  
by hand with a mild detergent. Dry completely.  
* Always wipe down the interior of the BeerTender after  
use. Beer is a natural product that can spoil.  
Therefore, you should always keep the appliance  
clean to maintain the quality of the beer dispensed and  
avoid unpleasant odors.  
* Rinse the pour spout between uses for optimal results.  
Handwash with warm soapy water. Do not wash in  
dishwasher.  
* To remove, unscrew turning counterclockwise  
from main unit. To re-attach, simply screw back  
in place turning clockwise.  
* You should never attempt to access internal parts of  
the appliance.  
IMPORTANT: After cleaning, ensure all parts of your  
BeerTender have completely dried before closing the  
lid.  
Storing the BeerTender  
* When the BeerTender is not being used for a long  
TM  
period of time, remove the DraughtKeg and turn the  
main switch to off.  
* Remove the plug from the power outlet.  
* Store the BeerTender at room temperature in a dry  
place out of childrenʼs reach.  
* Protect from dust and dirt.  
10  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 11  
6 - TROUBLESHOOTING  
Problem  
Possible causes  
Solutions  
The appliance  
The appliance is Connect the  
does not turn on. not connected to appliance to the  
the main power  
supply.  
power supply.  
No beer is being The appliance is Switch the  
dispensed. off. appliance on.  
The BeerTender® Replace the  
DraughtKeg is  
empty.  
BeerTender  
DraughtKeg with  
a new one.  
There is not a  
DraughtKeg  
inside the  
Install a  
DraughtKeg  
inside the  
BeerTender  
appliance.  
BeerTender  
appliance.  
The BeerTender Install/position the  
appliance tap  
handle is not  
correctly installed/  
positioned.  
tap correctly.  
11  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 12  
Problem  
Possible causes  
Solutions  
The BeerTender The BeerTender Allow the  
produces too  
DraughtKeg has BeerTender  
much foam when not reached the DraughtKeg to  
dispensing beer. right dispensing cool to the right  
temperature.  
temperature.  
The tap handle is Firmly and quickly  
being moved oo pull the handle  
slowly.  
down and forward  
as far as it will go.  
The BeerTender Wait 4 hours  
DraughtKeg has before dispensing  
been shaken.  
beer.  
The Volume Level The Scale needs Turn the power on  
indicator is  
blinking.  
to be reset with  
each new  
before inserting  
DraughtKeg. If  
DraughtKeg is  
inside, open the  
BeerTender Cover  
and lift up the  
DraughtKeg.  
DraughtKeg for 3-  
5 seconds before  
replacing into  
machine.  
12  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 13  
Problem  
There is a slight This is the normal  
buzz or hum functioning of the  
Possible causes  
Solutions  
coming from my cooling element  
machine.  
inside the  
BeerTender.  
Beer flows out too The tap handle is Open the tap  
slowly.  
not open all the  
way.(position at  
45°).  
completely.  
Ice forms in the  
The BeerTender Move the  
cooling chamber. has been installed BeerTender to a  
in a humid  
dry place.  
environment.  
A fault has  
Have the  
occured in the  
cooling system.  
BeerTender  
repaired by a  
Krups authorized  
service center.  
It is normal for a  
small patch of ice  
to form on the  
rear the cooling  
chamber (near the  
screws).  
13  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 14  
Problem  
The BeerTender The BeerTender Allow the  
appliance is DraughtKeg has BeerTender  
Possible causes  
Solutions  
dispensing warm not been chilled DraughtKeg to  
long enough and cool in the  
beer.  
is not at the right refrigerator for  
serving  
about 12 hours or  
inside the  
temperature.  
BeerTender for up  
to 18 hours until  
ideal serving  
temperature is  
reached.  
The lid of the  
The tap cover has Close the tap  
BeerTender does not been properly cover properly.  
not close.  
closed.  
The BeerTender Install the tap  
DraughtKeg has correctly.  
not been correctly Ensure the  
installed.  
draught tube has  
been installed  
completely and is  
not preventing the  
lid from closing.  
14  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 15  
Problem  
Possible causes  
Solutions  
®
The temperature The BeerTender Use the appliance  
indicator on the  
control display  
appliance is  
indoors and move  
exposed to a hot to a room where  
never reaches a temperature or to ambient  
ready-to-drink  
level.  
direct sunlight.  
temperature does  
not exceed 86°F.  
The control  
A warm  
Allow the  
display shows an DraughtKeg was BeerTender  
increasing  
installed in a cold system to  
temperature.  
appliance.  
compensate  
effect of the  
temperature  
change.  
Displayed  
temperature  
should start  
decreasing after 1  
hour maximum.  
15  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 16  
7 - Disposal  
* To dispose of your BeerTender®, dispose properly  
according to your local ordinances for disposing small  
appliances.  
8 - Consumer Service  
If you have additional questions, please call our  
Consumer Service Department.  
It is helpful to have the product available at the time of  
your call and to know the reference number that can  
generally be found on the base of the product.  
USA :  
Phone 1-866-232-0788  
Hours* Monday – Friday from 8:00 a.m. – 6:30 p.m.  
(EST)  
Letters should be addressed to :  
Krups  
196 Boston Avenue  
Medford, MA 02155  
Only letters can be accepted. Packages without a  
return authorization number will be refused.  
*Please note hours are subject to change.  
16  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 17  
9 - LIMITED WARRANTY  
This Krups product is warranted for 1 year from the date  
of purchase against defects in material and  
workmanship. During this period, the Krups product that,  
upon inspection by Krups, is proved defective,  
will be repaired or replaced, at Krupsʼ option, without  
charge to the customer. If a replacement product is sent,  
it will carry the remaining warranty of the original product.  
This warranty does not apply to any  
defect arising from a buyerʼs or userʼs misuse of the  
product, negligence, failure to follow Krupsʼ instructions,  
use on current or voltage other than that stamped on the  
product, wear and tear, alteration or  
repair not authorized by Krups, or use for commercial  
purposes.  
THE WARRANTIES SET FORTH HEREIN ARE  
EXCLUSIVE AND NO OTHER WARRANTIES,  
EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO ANY WARRANTY OF  
MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE OR USE, ARE MADE  
BY KRUPS OR ARE AUTHORIZED TO BE MADE  
WITH RESPECT TO THE PRODUCT.  
Some states do not allow limitation on how long an  
implied warranty lasts or do not allow the exclusion of  
incidental or consequential damages, so the above  
limitations may not apply to you.  
This warranty gives you specific legal rights, and you  
may also have other rights, which vary from state to  
state. If you believe your product is defective, bring the  
product (or send it, postage prepaid) along with proof of  
purchase to the nearest authorized Krups Service  
Center. (To find the nearest authorized Krups Service  
Center visit the Krups Website or contact the Krups  
Consumer Service indicated below).  
17  
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 1  
1
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 1  
1
1-Beertender one way B95 US.qxd:1-B95 oneway Amsterdam_UK.qxd 7/01/08 10:43 Page 1  
1

Polk Audio Car Amplifier DB1222 User Manual
Panasonic SDR S26 User Manual
Panasonic DMP B100 User Manual
Panasonic DMCZS10A User Manual
Panasonic CQ3700EU User Manual
Metra Electronics AFDI RSE 01 User Manual
Lennox Hearth BT135 User Manual
JVC Ks U58 User Manual
JVC KS FX490 User Manual
JVC GZ MG365U User Manual