Kramer Electronics Car Speaker SPK WA511 User Manual

KRAMER ELECTRONICS LTD.  
USER MANUAL  
MODEL:  
SPK-WA511  
On-Wall Active Speakers  
P/N: 2900-300112 Rev 3  
This page is intentionally left blank  
This page is intentionally left blank  
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast range of  
problems that confront video, audio, presentation, and broadcasting professionals  
on a daily basis. In recent years, we have redesigned and upgraded most of our  
line, making the best even better!  
Our 1,000-plus different models now appear in 11 groups that are clearly defined  
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;  
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:  
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:  
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:  
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:  
Sierra Products.  
Congratulations on purchasing your Kramer SPK-WA511 On-Wall Active  
Speakers, which are ideal for the following typical applications:  
Boardrooms  
Presentation venues  
Home theater  
Conference rooms  
Educational classrooms  
The package includes one of each of the following items:  
A pair of SPK-WA511 Active Speakers  
An RCA cable (2 meters)  
A speaker cable for connecting the active speaker to the passive speaker (4  
meters)  
An AC power cord (3 meters)  
A pair of U-shaped rotating mounting brackets with 4 mounting bracket  
screws  
This user manual  
SPK-WA511 - Introduction  
1
 
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
Review the contents of this user manual  
Use Kramer high-performance high-resolution cables  
Go to http://www.kramerelectronics.com to check for up-to-date  
user manuals, application programs, and to check if firmware  
upgrades are available (where appropriate).  
i
2.1  
Achieving the Best Performance  
To achieve the best performance:  
Use only good quality connection cables (such as the Kramer BC-2S) to  
avoid interference, deterioration in signal quality due to poor matching, and  
elevated noise levels (often associated with low quality cables)  
Do not secure the cables in tight bundles or roll the slack into tight coils  
Avoid interference from neighboring electrical appliances that may adversely  
influence signal quality  
Position your Kramer SPK-WA511 away from moisture, excessive sunlight  
and dust  
To ensure that you obtain the best sound results, do not open the  
housing of the passive speaker or the active speaker.  
i
2
SPK-WA511 - Getting Started  
   
3
Overview  
The SPK-WA511 is a powered two-way speaker system designed for indoor wall  
mounting. The system accepts a line level stereo input and amplifies it using a  
built-in amplifier and outputs a speaker signal to the passive speaker.  
The SPK-WA511 speaker system features:  
Three available inputs (that can either be connected separately or  
connected simultaneously to form a mix of the inputs) that consist of:  
.
A Line level unbalanced stereo audio input on a 3.5mm mini jack  
connector  
.
.
A balanced stereo audio input on a 5-pin terminal block connector  
An unbalanced stereo audio input on two RCA connectors  
An output to external amplified or non-amplified speakers  
An output to an external sub-woofer  
A unique looping output, letting you chain additional pairs of active and  
passive speakers  
TREBLE, BASS and VOLUME control knobs  
A control panel on the back of the active speaker that controls all the  
functions of both speakers  
A magnetic shield  
Enhanced bass reflex design  
An integrated 2x30W stereo amplifier (no external amplifier required)  
A self adjusting power range of 90 to 240V AC  
Auto-power shutoff  
The SPK-WA511 is enclosed in an ABS cabinet and can be mounted indoors on  
the wall, vertically or horizontally. The mounting brackets are made of hardened  
steel that attach to each speaker, letting you rotate each speaker to the left or  
right.  
SPK-WA511 - Overview  
3
 
Figure 1 and Figure 2 show examples of how the speakers can be installed in  
conference room and home theater setups, respectively.  
Figure 1: Active On-Wall Speakers in a Home Theater Setup  
Figure 2: Active On-Wall Speakers in a Conference Room Setup  
4
SPK-WA511 - Overview  
   
4
Defining the SPK-WA511  
This section defines the active SPK-WA511:  
Figure 3: SPK-WA511 Active Speaker  
SPK-WA511 - Defining the SPK-WA511  
5
   
#
Feature  
Function  
1
SPEAKER OUT Connectors  
Connect the active speaker to the (+) and (-)  
stereo sockets on the passive speaker  
The L speaker is active and the R speaker is  
passive  
2
3
4
5
6
7
8
INPUT  
Connectors  
5-pin Terminal Block  
Connect the audio source to one or more of the  
input connectors  
3.5mm Mini Jack  
L and R RCA  
BASS Control Knob  
TREBLE Control Knob  
VOLUME Control knob  
Rotate the button to control the bass  
Rotate the button to control the treble  
Rotate the button to adjust the audio volume  
Connect to the AC power cord  
AC-Input Power Supply (self  
adjusting)  
9
POWER Switch  
For turning the unit ON (I), OFF (0) or AUTO  
shutoff (II)  
When selecting the AUTO shutoff mode, the  
speaker enters the standby mode when idle  
for over 10 minutes  
10 POWER/STANDBY LED  
Illuminates in green when powered (POWER  
switch set to ON or AUTO)  
illuminates in red when in the standby mode  
(POWER switch is set to AUTO)  
In the AUTO mode, the LED illuminates green  
if an input signal is detected and illuminates  
red if idle for over 10 minutes  
11 LOOP OUTPUT 3.5mm Mini Jack  
Connect to another pair of active speakers  
Connector  
12 SUB OUT 3.5mm Mini Connector  
If required, connect an active sub-woofer to this  
output for maximum bass reproduction  
6
SPK-WA511 - Defining the SPK-WA511  
5
Installing the Speakers  
This section explains how to:  
Choose the best location for your speakers (see Section 5.1)  
Install the speaker wires (see Section 5.2)  
5.1  
Choosing the Best Location  
Before installing the speakers:  
Experiment by placing the speakers in different locations before finally  
deciding on the most suitable location  
Be sure that the wall type is appropriate for the mounting brackets, that is,  
either solid wood, bricks, concrete, hollow building blocks, or wood studs.  
You cannot mount the brackets on gypsum walls  
Check that the mounting location is free of obstructions, such as electrical  
piping, AC ducts or water lines, and so on  
5.2  
Installing the Speaker Wires  
To install the speakers, do the following:  
1. Connect the + and - stereo sockets of the active speaker to the + and -  
stereo sockets of the passive speaker using the cable supplied, as follows:  
Passive Speaker (R)  
Active Speaker (L)  
Figure 4: Connecting the Active Speaker to the Passive Speaker  
SPK-WA511 - Installing the Speakers  
7
       
2. Connect the audio source (for example, a CD or a DVD player and so on) to  
one of the INPUT connectors on the active speaker.  
3. Connect the power.  
4. Adjust the volume on the input source.  
5. Adjust the volume control on the rear side control panel.  
6. Adjust the bass and treble control on the rear side control panel.  
7. If required, connect an additional set of speakers by connecting the LOOP  
OUTPUT connector to the input of a second active speaker.  
8. If required, mount the speaker on the wall via the removable mounting  
brackets. To do so:  
.
.
Mark the location of the mounting holes  
Screw the mounting screws (not included in the package) into the  
mounting holes  
.
Slide the mounting bracket over the mounting screws so that the  
mounting bracket is secured to the surface  
8
SPK-WA511 - Installing the Speakers  
6
Technical Specifications  
Audio and Power  
DESCRIPTION:  
HIGH FREQUENCY DRIVER:  
2-way Bass Reflex active cabinet speaker  
1/2" MYLAR dome tweeter  
LOW FREQUENCY DRIVER:  
IMPEDANCE:  
5 1/4” Polypropylene cone with rubber edge woofer  
4Ω  
DISPERSION COVERAGE:  
CROSSOVER FREQUENCY:  
NOMINAL SENSITIVITY:  
DAMPING FACTOR:  
DIRECTIVITY FACTOR (Q):  
DIRECTIVITY INDEX (DI):  
SPL MAX PEAK:  
130° @2000Hz  
8000Hz  
85dB SPL @1m, 1W  
>100 @ 8Ω/400Hz  
5.8 (averaged 100Hz – 10kHz); 6.6 (2kHz)  
7.6dB (averaged 100Hz – 10kHz); 8.2dB (2kHz)  
110dB  
FREQUENCY RESPONSE:  
S/N RATIO:  
45Hz to 20kHz  
> 83dB  
THD:  
< 0.2%  
BUILT IN POWER AMPLIFIER:  
CONTROLS:  
2x30W RMS  
Volume, bass and treble  
0.7W  
STANDBY MODE POWER  
CONSUMPTION:  
INPUTS SIGNAL FOR  
SYSTEM “WAKE-UP” FROM  
STANDBY MODE:  
+8mV - +11 mV  
INPUT CONNECTORS:  
OUTPUT CONNECTORS:  
POWER SOURCE:  
Line level unbalanced stereo audio on a 3.5mm mini jack  
Line level balanced stereo audio on a terminal block connector  
Line level unbalanced stereo audio on left and right RCA connectors  
Speaker (to connect to the external passive speaker)  
3.5mm mini jack lineout for optional sub-woofer  
Looping output on a 3.5mm mini jack  
90−240V AC 50/60Hz (self adjusting)  
Shipping and Installation  
MATERIALS:  
Frame, grill and brackets steel; cabinet ABS  
WEIGHT PER SINGLE SPEAKER:  
Active Speaker: 2.7kg (5.95lbs) approx.  
Passive Speaker 2.2 kg (4.85lbs) approx.  
WEIGHT WITH MOUNTING KIT:  
Active Speaker: 3.1kg (6.83lbs) approx.  
Passive Speaker: 2.6kg (5.73lbs) approx.  
SHIPPING WEIGHT (FOR PAIR):  
DIMENSIONS:  
6kg (13.23lbs) approx.  
18.3cm x 17cm x 24.4cm (7.2” x 6.7” x 9.6”) W, D, H  
DIMENSIONS with mounting brackets: 18.3cm x 17.2cm x 26.5cm (7.2” x 6.8” x 10.4”) W, D, H  
INSTALLATION CLEARANCE:  
Front panel to wall (with mounting bracket): 22cm (8.7in)  
Back panel to wall (with mounting bracket): 4.5cm (1.8in)  
ACCESSORIES:  
1 pair of U-shaped rotating mounting brackets with 4 mounting  
bracket screws, 3m (9.84ft) power cord, 4m (13.12ft)  
loudspeaker cable and a 2m (6.6ft) 3.5mm to 2 RCA cable  
COLORS:  
Available in white or black  
Specifications are within a 10% tolerance and are subject to change without notice at  
SPK-WA511 - Technical Specifications  
9
 
This page is intentionally left blank  
For the latest information on our products and a list of Kramer distributors,  
visit our Web site where updates to this user manual may be found.  
We welcome your questions, comments, and feedback.  
SAFETY WARNING  
Disconnect the unit from the power  
supply before opening and servicing  
!
P/N:  
2900-300112  
Rev:  
3

Plantronics Bluetooth Headset M165 User Manual
Philips Car Video System 244EI User Manual
Panasonic GP US522CU User Manual
Panasonic AW E860 User Manual
Milan Technology MIL 140TRM User Manual
Kodak IMAGE SENSOR QUADRI LINEAR CCD KLI 4104 User Manual
Kenwood KDC BT945U User Manual
Kenwood KDC 415S User Manual
Kenwood DDX7065 User Manual
JVC KD S590 User Manual