MONITOR WITH DVD RECEIVER
KVT-522DVD
KVT-522DVDY
KVT-50DVDRY
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC
Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B64-4025-00/00 (EW/E2W/E3W)
Hands Free Unit Control
Control Screen Function
When Received a Call
Calling by Entering a Phone Number
Quick Dialing
47
47
48
48
49
49
50
Muting Audio Volume upon Reception
of Phone call
44
Muting Audio Volume upon Reception of
Phone Call
44
Controlling Tone-based Services
Calling by Phonebook
Making a Call Using Outgoing/Incoming
Character Entry
45
Call Records
51
52
53
54
54
55
56
How To Use the Character Entry Screen
45
Calling by Voice Recognition
Setting Up the Hands-Free Phone
Voice Registration
Key Word Voice Registration
Phone Number Preset
Screen Control
Screen Control
46
46
SMS (Short Message Service)
Setup Menu
58
58
58
59
59
60
61
62
62
63
64
66
67
68
68
69
69
70
70
72
73
74
74
75
75
76
77
77
78
78
79
Audio Control
Audio Control Menu
Audio Control
Equalizer Control
Tone Setup
80
80
80
81
82
82
Setup Menu
Audio Setup
Crossover Network Setup
DVD Setup
Language Setup
Parental Level Setup
DivX Setup
Zone Control
System Setup
Panel Color Coordinate
AV Interface Setup
User Interface
Direct Source Button Setup
Entering Background
Background Delete
Background Select
Touch Panel Adjustment
Clock Setup
Monitor Setup
Security Code Setup
iPod Setup
TV Setup
RDS Setup
Remote Controller
Battery installation
Remote Controller mode switch
Common operations (AUD mode)
DVD/VCD/CD/Audio files (DVD mode)
TV (TV mode)
84
84
84
85
86
87
88
88
Radio (AUD mode)
NAVI (NAVI mode)
DVD Language Codes
Help? Troubleshooting
Help? Error
89
90
91
92
Bluetooth Setup
Registering Bluetooth Unit
Registering Bluetooth Unit PIN Code
Registering Special Bluetooth Unit
Bluetooth Unit Connection
Deleting Bluetooth Unit
Software Information
Setup Memory
Specifications
English
3
How to read this manual
This manual uses illustrations to explain its
operations.
Seek Mode
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
Sets a station selection.
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
The mode is switched in following order each
time you touch the button.
Display
Setting
"AUTO1"
Tunes in a station with good reception
automatically.
"AUTO2"
"MANU"
Tunes in stations in memory one after another.
Switches to the next frequency manually.
Manual Memory
Stores the current receiving station in memory.
1
Select a station you wish to store in
memory
2
Store in memory
Next page 3
The above operation example with the mark
differs from the actual operation.
4
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
English
5
Before Use
Handling discs
2WARNING
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
How to reset your unit
• If the unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
• Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained in
the USB device. For how to remove the USB device,
see <Playing a USB device> (page 12).
Discs that cannot be used
• Discs that are not round cannot be used.
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)
• If you try to load a 3-inch-disc with its adapter into
the unit, the adapter might separate from the disc
and damage the unit.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
Other notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
¤
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
• The characters conforming to ISO 8859-1 character
set can be displayed.
• The RDS or RBDS feature won’t work where the
service is not supported by any broadcasting
station.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
disc player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
6
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Notes
List of playable discs
Navigation units that can be connected to
Disc
types
DVD
Standard
Support
Remark
this unit
• KNA-G520*
• KNA-G420*
• KNA-G421*
• KNA-DV3200
• KNA-DV2200
* Update the navigation software to the latest
version. For how to update the software, refer to the
instruction manual of the navigation unit.
‡
×
DVD Video
DVD Audio
DVD-R
‡
MP3/WMA/AAC/JPEG/
MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
‡
‡
‡
DVD-RW
DVD+R
DVD+RW
iPod that can be connected to this unit
‡
‡
×
‡
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
You can control an iPod from this unit by connecting
an iPod (commercial product) with Dock connector
using an optional accessory iPod connection cable
(KCA-iP300V).
Only video format
CD
Music CD
CD-TEXT/8-cm (3 inch)
discs supported.
The following iPods can be controlled from this unit.
• iPod nano
• iPod nano (Second Generation)
• iPod nano (3rd Generation)
• Fifth Generation iPod (iPod with video)
• iPod classic
• iPod touch
Update iPod software to the latest version.
The latest iPod software updater can be downloaded
from the Apple Inc. web site.
‡
‡
‡
CD-ROM
CD-R
MP3/WMA/AAC/JPEG/
DivX playback
CD-RW
Multisession supported
Packet write not supported.
‡
‡
×
×
%
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
CD-EXTRA
Only music CD session can
be played.
Sound quality of normal
CD music
%
HDCD
CCCD
×
×
%
Others
Dualdisc
By connecting your iPod to this unit with an optional
accessory iPod connection cable (KCA-iP300V), you
can supply power to your iPod as well as charge it
while playing music. However, the power of this unit
must be on.
Super audio CD
Only CD layer can be
played.
‡ : Playback is possible.
% : Playback is partly possible.
× : Playback is impossible.
Bluetooth unit that can be connected to
this unit
⁄
•
When buying DRM enabled contents, check the
Registration Code in the <DivX Setup> (page 62).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
•
KCA-BT200
TV tuner that can be connected to this unit
• KTC-D500E
• KTC-V300E
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
English
7
Notes
About Audio files
class USB device, iPod with KCA-iP300V
•
Playable Audio file
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
⁄
•
If music of normal CD and other playback systems are
About Picture files
Acceptable picture files
JPEG
Extensions
jpg, jpeg
Acceptable media
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
recorded in the same disc, only the playback system
recorded at the first setout is played.
Playable disc media
CD-R/RW/ROM, DVD R/RW
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device
USB mass storage class, iPod with KCA-iP300V
Playable USB device file system
FAT16, FAT32
•
•
•
•
•
•
•
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
About USB device
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, "RESUMING" is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• When the iPod is connected to this unit,
"KENWOOD" or "✓" is displayed on the iPod to
indicate that you cannot operate the iPod.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
•
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
<
v
:
:
FFolder
Audiofile
CD
(ꢂ)
vꢀ
ꢁ
ꢃ
vꢆ
vꢇ
ꢅ
vꢄ
ꢈ
vꢉ
v.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
An online manual about audio files is put on the
manual, detailed information and notes which are
not written in this manual are provided. Make sure
to read through the online manual as well.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the CA-
U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
⁄
•
In this manual, the word "USB device" is used for flash
memories and digital audio players which have USB
terminals.
•
The word "iPod" appearing in this manual indicates the
iPod connected with the KCA-iP300V (optional accessory).
About Video files
•
•
•
Acceptable video files
MPEG1, MPEG2, DivX
Extensions
mpg, mpeg, m1v, m2v, divx, div, avi
Acceptable media
CD-R/RW/ROM, DVD R/RW, VCD, mass-storage-
8
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
1
2
1
4
5
2
4
DVD disc marks
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Symbol
Description
Indicates a region number. The discs with this mark can
be played with any DVD player.
ALL
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
Prohibition Mark
禁止マーク
8
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
32
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
9
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
16:9 LB
English
9
Basic Operations
When the monitor is open
Security indicator
C
B
A
E
B D
When the monitor is closed
Disc loading slot
F
G
H
I
B
Open/Close the monitor
Press to open or close the monitor panel
• Do not touch the moving components when you are opening or closing the monitor. If you touch the moving
components, you may be hurt or the equipment may be damaged.
• Do not try to open or close the monitor by hand.
⁄
• You can automatically open or close the monitor when you turn on or off the ignition key (page 70).
• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement
is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also
canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] button again.
10
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
A
B
Adjusts the volume
Turns power ON/OFF
Press the button to turn on the power.
When the button is pressed and held down for
1 second or more, the power is turned off.
F
Attenuates the volume
Press it to attenuate the volume.
Press it again to cancel muting.
F
Listening Traffic Infomation
Press it for more than 1 second to turn the
Traffic Infomation function on or off. (page 31)
C
Playing a disc
When you load a disc into disc loading slot, the disc starts playing.
If a menu appears, when playing a video disc, select the desired item.
⁄
• See <List of playable discs> (page 7) for a list of supported discs and formats.
Removing a disc
Press [0] (Eject) button.
D
H
Play/ Pause
Select a band/folder
Press [38] button once to pause.
Press again to resume playing.
Press [FM] button to change to the radio bands
to FM1/2/3 or next folder/disc.
Press [AM] button to change the radio band to
AM or previous folder/disc.
D
E
Stop/ play
Press [7] button to stop playing.
Press [38] button to resume playing from
the previous interrupted position.
I
‰
Select a chapter/scene/track/frequency
Press [4] or [¢] button.
Selects a music or chapter, track, or frequency.
Î
G
Switches Seek Mode
Press the butotn to selects the Seek mode. (see
page 29, 41 for the <Seek Mode>)
English
11
Basic Operations
A
Playing a USB device
When connecting a USB device, playback starts automatically.
⁄
•
If the USB source is selected when a USB device is not connected, "No Device"
is displayed.
•
When the playback is stopped and then restarted, the playback will start from
the point where it was stopped at the last time. Even if the USB is removed
and connected again, the playback will start from the last stopped point
unless the contents in the USB device is changed.
•
Make sure that the USB device is connected firmly.
Removing the USB device
Press
on the USB control screen to enter the USB suspend mode, and then remove the USB
device. Refer to <USB Device Control> (page 36).
¤
•
Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
12
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
A
Selecting a source
Press it to display the source select screen. Touch the source button to select the source.
Full Source Select screen
2
8
1 Scrolls the source display.
3
⁄
1
4
•
The displayed source depends on the type of device
connected. In addition, you cannot press the button of
currently unavailable source.
5
1
6
7
The following buttons are always displayed on the
source select screen and source control screen.
2 Press for at least 2 seconds to erase the buttons. Touch
the screen to redisplay the buttons.
7
3 Displays the Source Select screen.
The display switches between Favorite Source Select
screen and Full Source Select screen by touching the
button.
4 Displays Source Control screen.
5 Displays the Audio Control Menu screen. (page 80)
6 Displays the Setup Menu screen. (page 58)
7 Adjusts the volume.
Favorite Source Select screen
8 Clock display
9
9 Displays the Full Source Select screen.
⁄
•
For how to register the frequently used source buttons to
Favorite Source Select screen, see <Direct Source Button
Setup> (page 67).
English
13
Basic Operations
A
B
C
C
A
Screen Setup
Switches to the Navigation system
Press the button.
Displays the Screen Control Screen (page 46).
Press the button to switch the display to the
navigation system screen.
C
B
Switches to the Hands Free control
Turns the display OFF
Press it for more than 1 second to the Hands
Free control screen.
Press it for more than 1 second to turn the
display off.
Press it again for more than 1 second to
resume the normal display.
Press [NAV], [SRC] or [FNC] button, or touch the
screen to resume the normal display.
⁄
• Functions of the [NAV] button can be changed to rear
view function. See <System Setup> (page 62) for the
function setting of the [NAV] button.
14
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
B
Switching the function screen
The function control screen switches in the following order each time you press the button.
Navigation screen
Picture or Video playback
screen
[FNC] button
[FNC] button
Easy Control buttons
appear.
Easy Control buttons
appear.
Navigation screen
Picture or Video playback screen
Mode:Full AV–OUT:AV–IN
DVD VIDEO
SCRN
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
IN
Easy Control button
Easy Control button
⁄
• For the functions of Easy Control buttons, see <Control of other sources while displaying the navigation screen> (page 16).
English
15
Navigation Control
Sets and controls the navigation system function.
Control of Other Sources While Displaying
the Navigation Screen
Using the Navigation System
Displays the navigation system screen and makes
the navigation function available.
Selected source can be controlled while
displaying navigation screen.
1
Displaying the navigation screen
1
Display the easy control buttons
When "DVD" is selected:
1
2
3
4
5
2
Setting the navigation system function
3
6
Touch the navigation system button displayed
on the screen. See the included NAVIGATION
SYSTEM's INSTRUCTION MANUAL for
1 Displays the Screen Control screen.
See <Screen Control> (page 46).
2 Adjusts the volume.
information on using the navigation system.
3 During DVD play :
⁄
Selects a chapter.
During VCD play :
Selects a scene (when PBC is On) or a track
(when PBC is Off).
During CD play :
Selects music. When you continue to touch
the button, fast forwards or fast backwards.
During Audio file, Video file, or Picture file
play :
•
You can set the navigation system function when
nothing else is displayed on the screen. If anything else,
such as Easy control panel is displayed, erase it first.
An optional navigation system needs to be connected.
See <Navigation unit that can be connected to this unit>
(page 7) for connectable navigation units.
•
Selects a file.
4 Stops playing.
When pressed twice, the disc is played from
its beginning when you play it in the next
time. (DVD play only)
5 Plays or pauses.
6 When touched this area, the source control
screen appears.
16
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
When "USB" or "iPod" is selected:
8
7
7
9
7 During iPod play :
Searches Music or Video.
During USB play :
Selects a file.
8 Plays or pauses.
9 When touched this area, the source control
screen appears.
When "TUNER" is selected:
11
10
10
11
12
p Tunes in a station.
q Switches the band (to AM or FM 1/2/3).
w When touched this area, the source control
screen appears.
When "TV" is selected:
15
13
13
14
16
e Selects a channel.
Use the <Seek Mode> (page 41) to change
the channel tuning sequence.
r Switches to TV1 or TV2.*1
t Switches the Seek mode.*1
y When touched this area, the source control
screen appears.
When "Bluetooth" is selected:
19
17
17
18
20
u Selects a file.
i Plays.
o Pauses.
; When touched this area, the source control
screen appears.
⁄
•
The Easy Control buttons are hidden when you touch the
central part of the screen.
•
*1Not available for the optional digital TV tuner KTC-
D500E.
English
17
Watching DVD/VCD
You can play DVD/VCD using various functions.
•
•
For the basic method of how to watch DVD/VCD, see <Basic Operations> (page 10).
Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch>
(page 84).
5 Backward Chapter Search Area
Selects the previous chapter.
6 DVD Disc Menu Control Buttons Area
Displays the Disc Menu Control buttons
(page 20).
Functions During the Playback Screen
Basic functions are available even when the
playback screen is displayed.
1
Display the playback screen
7 Information Display Button Area
VCD playback screen
Mode:Full
DVD VCD
AV–OUT:AV–IN
12
11
10
13
8
9
DVD VCD
Scene
3
P
00:05
AF
PBC
VER2
ST
IN
or
8 Scene/Track Number Display
9 Play time Display
p Forward Scene/Track Search Area
Selects the next scene (when PBC is On) or
track (when PBC is Off).
q Backward Scene/Track Search Area
Selects the previous scene (when PBC is On)
or track (when PBC is Off).
[DVD] button on the "Source Select" screen
w Zoom Control Button Area
Displays the Zoom Control buttons (page
21).
e Information Display Button Area
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
DVD playback screen
Mode:Full
AV–OUT:AV–IN
DVD VIDEO
6
5
4
7
1
2
3
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
1 Title Number Display
2 Chapter Number Display
3 Play Time Display
4 Forward Chapter Search Area
Selects the next chapter.
18
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Functions While Displaying the Control
Screen
Functions When Displaying the Easy
Control Panel
Switches to the source control screen to use
various playback functions.
Displays the basic operation buttons on the
screen.
1
While the source is playing, press the [FNC]
button
1
While the source is playing, press the [FNC]
button
Mode:Full
AV–OUT:AV–IN
DVD VIDEO
Mode:Full
AV–OUT:AV–IN
DVD VIDEO
SCRN
SCRN
1
1
3
2
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
IN
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
IN
1 Chapter Search (during DVD play)
Searches for a chapter.
Scene/Track Search (during VCD play)
Selects a scene (when PBC is On) or a track
(when PBC is Off).
When playing a DVD
5
1
2
3
4
2 Stops playing.
6
9
When pressed twice, the disc is played from
its beginning when you play it in the next
time.
8
8
7
11
10
10
13
12
14
12
15
18
3 Plays or pauses.
⁄
17
16
•
When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
The Easy Control Panel is hidden when you touch a
central part of the monitor.
When playing a VCD
•
19
20
21
1 Switches to the playback screen.
2 Title Number Display (during DVD play)
3 Chapter/Scene/Track Number Display
4 Play Mode Display
5 Play Time Display
6 Volume Label Display
When
is appeared, the text display is
scrolled by pressing it.
7 Ejects the disc.
8 Fast Forwards or Fast Backwards.
Next page 3
English
19
Watching DVD/VCD
9 Stops playing.
DVD Disc Menu
When pressed twice, the disc is played from
its beginning when you play it in the next
time.
Selects an option from the DVD Disc Menu.
1
Display the Disc Menu Control screen
p Selects a chapter, a scene or a track.
When the DVD-VIDEO/VCD is paused, touch
this button to start single-frame stepping.
q Plays or pauses.
Mode:Full
AV–OUT:AV–IN
DVD VIDEO
w Slow Forwards or Backwards. (during DVD
play)
e Switches the button display.
r Switches the Repeat Play operations in the
following sequence.
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
DVD: Title Repeat, Chapter Repeat, Repeat
Off
VCD: Track Repeat, Repeat Off (Available
when the PBC is off)
1
3
6
5
Top
Menu
M
e n u C t r l
Return
3
3
t Switches the play time display in the
following sequence.
DVD: Chapter, Title, remaining titles
VCD: Track, disc, remaining discs (Effective
only when the PBC function is off)
y Function Indicator
u Appears when a disc is inserted.
i Sound indicator
o Turns the PBC function of VCD On or Off.
(only when VCD Ver 2.0 is in use)
; Appears when PBC is On.
a VCD version indicator
4
7
3
8
2
E n t e r
C a n c e
l
E x
i
t
Highlight
1 Calls the Menu.
2 Returns to the Disc Menu screen.
3 Selects a menu option.
4 Enters your menu selection.
5 Returns to the previous menu screen.
6 Displays the Top Menu.
7 Highlight Control.
8 Clears the Disc Menu Control.
20
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Highlight Control
q Switches the subtitle language.
(during program playback only)
w Switches the voice language.
(during program playback only)
e Displays the Zoom Control screen.
r Clears the Disc Menu Control.
You can select a chapter and title for the DVD
Menu screen. When you touch the screen, you
can select the DVD menu.
Top
Menu
M
e n u C t r l
Return
Zoom Control
Audio
1 / 2
M
e n u C t r l
S U B
3 / 3
E n t e r
C a n c e
l
E x
i
t
Highlight
Z o om
Angle
E x i t
1 / 1
H i g h l i gh t On
16
Z o omC t r l
16
16
⁄
15
16
17
18
t
Z o om
x 2
C a n c e
l
E x
i
•
To cancel Highlight Control, press [FNC] button.
2
Select Disc Menu options
t Changes the zoom ratio at 4 levels (2 times,
3 times, 4 times, or off) each time you
touch.
Disc Menu
y Scrolls the screen in the direction you
touch.
Top
Menu
M
e n u C t r l
Return
u Returns to the Disc Menu Control screen.
i Clears the Disc Menu Control.
E n t e r
C a n c e
l
E x i t
Highlight
Audio
1 / 2
M
e n u C t r l
S U B
3 / 3
9
11
12
13
10
14
E x
Z o om
Angle
i t
1 / 1
9 Calls the Menu Control.
p Switches the picture angle.
(during program playback only)
English
21
Watching DVD/VCD
VCD Zoom Control
Displays an enlarged VCD screen.
1
Display the Zoom Control screen
Mode:Full
DVD VCD
AV–OUT:AV–IN
DVD VCD
Scene
3
P
00:05
AF
PBC
VER2
ST
IN
Z o omC t r l
2
2
2
1
Z o om
x 2
E x
i
t
2
3
1 Changes the zoom ratio at 2 levels (2 times
or off) each time you touch.
2 Scrolls the screen in the direction you
touch.
3 Clears the Zoom Control button.
22
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Music Disc & Audio File Listening
You can recall various control screens during CD/Audio file playback.
•
•
•
For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10).
See <List of playable discs> (page 7) for playable discs.
See <About Audio file> (page 8) for playable files.
Functions While Displaying the Control
Screen
5 Music information display
Selects the Disc Text or Track Text.
When
is appeared, the text display is
Switches to the source control screen to use
various playback functions.
scrolled by pressing it.
6 Ejects the disc.
7 Fast Forwards or Fast Backwards.
8 Stops playing the built-in disc player. When
pressed twice, the disc is played from its
beginning when you play it in the next
time.
9 Selects a track.
p Plays or pauses.
q Starts or stops Scan Play (that plays the
beginning of each music one after the
other).
or
w Repeats to play (the present track).
e Starts or stops Random Play (to play music
in random order).
r Switches the number of lines displayed in
the Information Display.
t Switches the play time display between
Track, Disc, and Disc Remaining Time.
y Function Indicator
[DVD] button on the "Source Select" screen
u Appears when a disc is inserted.
During CD playback
3
2
4
1
5
7
7
8
6
9
10
9
11
12
13
14
15
16
17
1 Switches to the wallpaper.
2 Track (Music) Number Display
3 Play Mode Display
4 Play Time Display
Next page 3
English
23
Music Disc & Audio File Listening
During Audio file playback
b MUSIC, MOVIE or PICTURE indicator
n Appears when a disc is inserted.
m Repeats to play the music or data of the
present folder.
, Displays images in the folder currently
being played one after another.
If there is no image in the folder currently
being played, initial background is
displayed.
18
20
19
21
22
25
23
24
28
24
28
26
27
31
26
30
29
32
35
33
36
34
For information on setting the image
display time, see <System Setup> (page 62).
. You can search for folders and Audio files
through a hierarchy.
37
P Displays music information (such as Tag
and content property) of Audio file being
played.
39
40
38
43
44
42 41
42
i Switches to the playback screen. If there is
no playback screen, wallpaper is displalyed.
o Folder and File Number Display
; Play Mode Display
a Play Time Display
s Music information display
Q Lists folders and Audio files
Selects Folder Name, File Name, Title, Artist
Name, or Album Name.
Folder opens when touched, and the Audio
file is played.
When
is appeared, the text display is
When
is appeared, the text display is
scrolled by pressing it.
d Ejects the disc.
scrolled by pressing it.
W Scrolls the list.
f Fast Forwards or Fast Backwards.
(Disabled when a JPEG is being played.)
g Stops playing.
E Moves to the top hierarchy level.
R Moves up a hierarchy level.
When pressed twice, the disc is played back
from its beginning in the next time.
h Selects a file.
j Plays or pauses.
k Selects a folder.
l Switches the button display.
/ Starts or stops Scan Play (that plays the
beginning of each music or data one after
the other).
z Repeats to play (the preset files or data).
x Starts or stops Random Play (to play files of
the present folder in random order).
c Switches the number of lines displayed in
the Information Display.
v Function Indicator
24
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Video File/Picture Watching
You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and
picture file (JPEG file).
5 JPEG: Picture Control Button Area (page 27)
DivX: Sub=Off, Audio 1/1
MPEG: Not effective
6 Information Display Button Area
Function During Playback Screen
Basic functions are available even when the
playback screen is displayed.
1
Display the playback screen
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
or
[DVD] button on the "Source Select" screen
Mode:Full
AV–OUT:AV–IN
DVD MEDIA
5
4
3
6
1
2
DVD MEDIA
2
1
P
00:00:05
IN
1 Folder/File Number Display
2 Play Time Display
3 Forward File Search Area
Selects the next file.
4 Backward File Search Area
Selects the previous file.
English
25
Video File/Picture File Watching
Functions When Displaying the Easy
Control Panel
Functions While Displaying the Control
Screen
Displays the basic operation buttons on the
screen.
Switches to the source control screen to use
various playback functions.
1
While the source is playing, press the [FNC]
button
1
While the source is playing, press the [FNC]
button
Mode:Full
AV–OUT:AV–IN
DVD MEDIA
Mode:Full
AV–OUT:AV–IN
DVD MEDIA
SCRN
SCRN
3
1
2
1
DVD MEDIA
2
1
P
00:00:05
DVD MEDIA
2
1
P
00:00:05
PICTURE
IN
PICTURE
IN
1 Selects a file.
2 Stops playing.
3 Plays or pauses.
1
2
3
4
⁄
5
8
•
When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
The Easy Control Panel is hidden when you touch a
central part of the monitor.
6
7
7
9
10
14
9
•
11
11
13
12
15
18
16
19
17
20
23
22
21
1 Switches to the playback screen.
2 Folder and File Number Display
3 Play Mode Display
4 Play Time Display
26
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
5 Video/Picture information display
Selects Folder Name, File Name, Title, Artist
Name, or Album Name.
g Scrolls the list.
h Moves to the top hierarchy level.
j Moves up a hierarchy level.
When
is appeared, the text display is
scrolled by pressing it.
6 Ejects a disc.
Picture Control
7 Fast Forwards or Fast Backwards.
(Disabled when a JPEG is being played.)
8 Stops playing.
When pressed twice, the disc is played back
from its beginning in the next time.
9 Selects a file.
Adjusting the video display.
1
Start Picture Control
Mode:Full
AV–OUT:AV–IN
DVD MEDIA
p Plays or pauses.
q Selects a folder.
w Switches the button display.
e Starts or stops Scan Play (that plays the
beginning of each song or data one after
the other).
r Repeats to play (the preset files or data).
t Starts or stops Random Play (to play files of
the present folder in random order).
y Switches the number of lines displayed in
the Information Display.
DVD MEDIA
2
1
P
00:00:05
IN
2
Adjust the video display
Picture Ctrl
2
3
u Function Indicator
i PICTURE, MOVIE or MUSIC indicator
o Appears when a disc is inserted.
; Repeats to play the file of the present folder.
a Displays images in the folder currently
being played one after another.
If there is no image in the folder currently
being played, initial background is
displayed.
1
4
Exit
1 Reverses the picture horizontally.
2 Rotates counter clockwise.
3 Rotates clockwise.
4 Ends Picture Control.
For information on setting the image
display time, see <System Setup> (page 62).
s You can search for folders and files through
a hierarchy.
d Displays information of file being played.
26
27
25 24
25
f Lists folders and Video files/Picture files.
Folder opens when touched, and the Video/
Picture file is played.
English
27
Radio Listening
Various control screens appear in the Tuner Source mode.
•
•
For the basic method of receiver button operations, see <Basic Operations> (page 10).
Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 84).
Functions While Displaying the Control
Screen
4 Radio station information display.
Selects the Program Service Name, Title &
Artist name, Station Name, Category Name
1/2, or Radio Text.
5 Switches to the FM1/2/3 band.
6 Switches to the AM band.
Switches to the source control screen to use
various functions.
7 Tunes in a station.
Use the <Seek Mode> (page 29) to change
the frequency switching.
8 Switches the button display.
9 Selects the Monaural reception mode. (Only
when receiving the FM broadcast)
p Selects the Auto Memory mode.
(See page 30 for the <Auto Memory>)
q Switches the Seek mode.
[TUNER] button on the "Source Select" screen
(See page 29 for the <Seek Mode>)
w Switches the number of lines displayed in
the Information Display.
e Turns the Local Seek function On or Off.
r Turns the Traffic Information function On or
Off.
3
2
1
See <Traffic Information> (page 31).
4
t When
to
buttons appear, you
14
5
can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 30) or <Manual
Memory> (page 30).
7
7
6
13
9
10
12
8
11
y Searches station by program type. See
<Search for Program Type> (page 32).
u Lists and selects memorized station.
i Displays Radio Text screen. See <Radio
Text> (page 31).
15
16
17
18
1 Band display
2 Preset number
3 Frequency display
28
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Seek Mode
19
Sets a station selection.
20
20
o Memorized stations are displayed. Touch to
tune in.
; Scrolls the list.
The mode is switched in following order each
time you touch the button.
Display
Setting
"AUTO1"
Tunes in a station with good reception
automatically.
"AUTO2"
"MANU"
Tunes in stations in memory one after another.
Switches to the next frequency manually.
English
29
Radio Listening
Auto Memory
Manual Memory
Stores stations with good reception in memory
automatically.
Stores the current receiving station in memory.
1
Select a station you wish to store in
memory
1
Select a band you wish to store in memory
2
Select the Auto Memory mode
2
Store in memory
Continue to touch until the memory number
appears.
3
Start Auto Memory
Touch
or
.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
30
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
#
: Press for # seconds.
Radio Text
Traffic Information
You can display the radio text. (Only when
receiving the FM broadcast)
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
1
2
Select a station
1
Set the Traffic information mode
Display the radio text
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
1
2
2
3
1 Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus,
or Radio Text for text display.
⁄
•
When
is appeared, the text display is
It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
scrolled by pressing it.
2 Scrolls the text display.
3 Returns to the previous screen.
•
English
31
Radio Listening
Search for Program Type
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1
Enter Program Type mode
2
Select a Program Type
1
3
2
2
4
1 Program Type is displayed. Touch to select a
Program Type.
2 Scrolls the Program Type list.
3 Searches for the program type.
It is displayed when the Program type is
selected.
4 Returns to the previous screen.
3
Search a station of the selected Program
Type
32
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP300V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
Functions When Displaying the Easy
Control Panel
Connecting an iPod
Connect an iPod to this unit.
Displays the basic operation buttons on the
screen.
1
While the source is playing, press the [FNC]
button
Mode:Full
AV–OUT:AV–IN
iPod
2
1
Mode:Full
AV–OUT:AV–IN
iPod
3
SCRN
iPod
P
00:00:05
I
IN
1
2
1
1 Forward music/video search area
Selects the next music/video.
2 Backward music/video search area
Selects the previous music/video.
3 Information display button area
iPod
P
00:00:05
IN
.
1 Music/Video Search.
2 Plays or pauses.
⁄
The information is displayed for 5 seconds.
•
When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
The Easy Control Panel is hidden when you touch a
central part of the monitor.
⁄
•
•
Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
•
•
•
If the played song is not a video content, "No iPod Video
Signal" is displayed on the video screen.
While connecting an iPod, "KENWOOD" appears on the
iPod and the iPod's control is disabled.
English
33
iPod Control
Functions While Displaying the Control
Screen
14
Switches to the source control screen to use
various playback functions.
When Video or picture is playing, press the
[FNC] button.
16
17
18
15
1 Image picture
Switches to the playback screen. If there is
no playback screen, wallpaper is displalyed.
2 Total number of music in the iPod and the
music number display
3 Play Mode Display
Mode:Full
AV–OUT:AV–IN
4 Play Time Display
iPod
5 Music/Video Information Display
Selects the Title, Artist Name, Album Name
or iPod Name.
SCRN
When
is appeared, the text display is
scrolled by pressing it.
iPod
6 Fast Forwards or Fast Backwards.
7 Selects Music/Video.
P
00:00:05
IN
8 Plays or pauses.
9 Switches the button display.
p Starts or stops Scan Play (that plays the
beginning of each music or video one after
the other).
or
q Repeats to play (the preset files or data).
w Starts or stops Random play.*
e MUSIC or VIDEO indicator
r Starts or stops Album Random Play (plays
randomly from current album).*
t Displays the list of music category.
y Displays the list of video category.
u Displays the previous music/video list
screen.
[iPod] button on the "Source Select" screen
i Displays information screen of music/video
being played.
⁄
4
2
1
3
* Disabled when VIDEO is being played.
5
6
7
8
12
9
10
11
13
34
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
1
19
21
22
23
20
20
o Categories and music are listed.
Touch a category name to move its lower
level. If music title is displayed, the music is
played by touching it.
When
is appeared, the text display is
scrolled by pressing it.
When
is appeared, all the music in its
category is played by touching the button.
; Switches list page.
a Returns to previous category.
s Moves to the top category.
d Displays the currently playing category.
English
35
USB Device Control
You can control and listen to songs in your USB device by simply connecting it to the USB connector of this
unit.
•
For the connection of a USB device, see <Basic Operations> (page 10).
Functions When Displaying the Easy
Control Panel
Functions While displaying the Control
Screen
Displays the basic operation buttons on the
screen.
Switches to the source control screen to use
various playback functions.
When Video or picture is playing, press the
[FNC] button.
1
While the source is playing, press the [FNC]
button
Mode:Full
AV–OUT:AV–IN
USB
Mode:Full
AV–OUT:AV–IN
USB
SCRN
SCRN
1
0002/0006
1
USB
2
P
00:00:05
IN
USB
0002/0006
P
00:00:05
IN
.
1 Selects a file.
2 Plays or pauses.
or
⁄
•
The Easy Control Panel is hidden when you touch a
central part of the monitor.
[USB] button on the "Source Select" screen
36
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
4
2
y Repeats to play the music or data of the
present folder. (Only in Folder Select Mode)
u Displays images in the folder currently
being played one after another.
If there is no image in the folder currently
being played, initial background is
displayed.
1
3
5
7
8
6
9
12
13
14
10
11
15
For information on setting the image
display time, see <System Setup> (page 62).
i Displays the folder list. See <Folder Select>
(page 38).
o Displays the list of category.
; Displays information screen of music being
played.
16
⁄
* Disabled during play list mode.
17
18
19
20
1 Image picture
1
Switches to the playback screen. If there is
no playback screen, wallpaper is displalyed.
2 Track Number Display
3 Play Mode Display
4 Play Time Display
21
23
24
25
26
22
22
5 Music information display
Selects the Folder Name, File Name, TItle,
Artist Name, or Album Name.
The display above can also be the folder list
display. See <Folder Select> (page 38).
When
is appeared, the text display is
scrolled by pressing it.
a Switches to the lower level of the category.
If the file is displayed, the music is played by
touching it.
6 Removes the USB device.
When "No Device" is shown, the USB device
can be removed safely.
If you wish to play it again while the USB
device is connected, press it again.
7 Selects a folder. (Only in Folder Select
Mode)*
s Scrolls the list.
d Lists all the music in the selected category.
f Moves to the upper level of the category.
g Moves to the top category.
h Displays the currently playing category.
(Only in Category Mode)
8 Selects a file.
9 Plays or pauses.
p Switches the button display.
q Starts or stops Scan Play (that plays the
beginning of each music one after the
other).
w Repeats to play (the present music).
e Starts or stops Random Play (to play music
in random order).*
r Switches the number of lines displayed in
the Information Display.
t MUSIC, VIDEO or PICTURE indicator
English
37
USB Device Control
Folder Select
Searches folders and Audio files stored in the USB
device according to hierarchy.
1
Start Folder Select
2
Select music
1
3
4
5
6
2
2
1 Lists folders and Audio files
Folder opens when touched, and the Audio
file is played.
2 Scrolls the list.
3 Moves to the top hierarchy level.
4 Moves up a hierarchy level.
5 Moves to the top category.
6 Displays the currently playing file.
38
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
TV Watching
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
Functions When Displaying the Easy
Control Panel
Function During TV Screen
Basic functions are available even when the TV
screen is displayed.
Displays the basic operation buttons on the
screen.
1
Display the TV screen
1
While the source is playing, press the [FNC]
button
[TV] button on the "Source Select" screen
Mode:Full
AV–OUT:AV–IN
TV
SCRN
BAND
SEEK
3
2
1
1
2ch
Mode:Full
AV–OUT:AV–IN
TV
TV1
Preset 1
TV
7
6
5
1 Selects a channel.
Use the <Seek Mode> (page 41) to change
the channel tuning sequence.
8
2 Switches to TV1 or TV2.*1
1
2
3
4
3 Switches the Seek mode.*1
TV
TV1
Group 1
Preset 1
2ch
1 TV Band Number Display
2 TV Area Group Display. See <TV Setup>
(page 74).
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
⁄
•
•
•
When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
The Easy Control Panel is hidden when you touch a
central part of the monitor.
*1 Not available for the optional digital TV Tuner KTC-
D500E.
Increases the channel.
6 Channel Down Area
Decreases the channel.
7 Band Switch Area
Switches to TV1 or TV2.
8 Information Display Button Area
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
English
39
TV Watching
Functions While Displaying the Control
Screen
7 Select a channel.
Use the <Seek Mode> (page 41) to change
the channel tuning sequence.
8 Switches to TV1 or TV2.
9 Switches the button display.
p Selects the Auto Memory mode.
See <Auto Memory> (page 41).
q Switches the Seek mode.
See <Seek Mode> (page 41).
w Indicates current Seek mode.
Switches to source control screen to use various
functions.
1
While the source is playing, press the [FNC]
button
e When
to
buttons, you can
recall channels on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 41) or <Manual
Memory> (page 42).
Mode:Full
AV–OUT:AV–IN
TV
r Sets a name to the tuned station. (page 42)
t Lists and selects memorized station.*1
SCRN
BAND
SEEK
Preset 1
2ch
TV
TV1
16
3
4
5
2
1
6
y Memorized stations are displayed. Touch to
8
tune in.*1
7
7
11
12
⁄
10
9
*1 Not available for the optional digital TV Tuner KTC-D500E.
13
15
14
1 Switches to the TV screen.
2 Band display
3 TV Area Group Display
See <TV Setup> (page 74).
4 Memory Number Display
5 Channel display
6 Channel information display
40
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
TV Menu (with KTC-D500E (optional
accessory) connected only)
Auto Memory
Stores stations with good reception in memory
automatically.
Menu Control screen appears by touching the
area shown below.
1
Select a band you wish to store in memory
Mode:Full
AV–OUT:AV–IN
TV
TV
TV1
Group 1
Preset 1
2ch
2
Select the Auto Memory mode
1
EPG
3
2
6
Menu
M
e n u C t r l
Return
6
6
4
6
5
E x
E n t e r
i
t
1 Shows EPG (Electric Program Guide) screen.
2 Shows Digital TV Broadcansting menu
screen.
3
Start Auto Memory
3 Returns to the previous screen.
4 Executes selected menu item.
5 Returns to Digital TV screen.
6 Moves highlight in Digital TV Broadcansting
menu.
Seek Mode
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
Sets a station selection.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
The mode is switched in following order each
time you touch the button.
Display
Setting
"AUTO1"
Tunes in a station with good reception
automatically.
"AUTO2"
"MANU"
Tunes in stations in memory one after another.
Switches to the next frequency manually.
English
41
#
TV Watching
: Press for # seconds.
Manual Memory
Set Station Name
Stores the current receiving channel in memory.
Assigns a name to a station.
1
Select a station you wish to store in
memory
1
2
Select a station you wish to name
Start Name set
2
Store in memory
3
4
Enter the name
See <Character Entry> (page 45) for
information on how to enter a name.
End Name set
Continue to touch until the memory number
appears.
42
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Bluetooth Audio Control
When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio
player and cell-phone.
•
You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction
manual of the Bluetooth Unit as well.
Functions While Displaying the Control
Screen
Switches to control screen to use various
functions.
[Bluetooth] button on the "Source Select"
screen
3
2
1
4
4
1 Plays.
2 Pauses.
3 Stops playing.
4 Selects a file.
⁄
•
If the Bluetooth Audio player does not support AVRCP
profile, buttons 1 to 4 are not displayed. Operate from
the Audio player.
English
43
Muting Audio Volume upon Reception of Phone call
When the telephone is called, the system is paused automatically.
Muting Audio Volume upon Reception of
Phone Call
When the telephone is called...
The Phone Call ("CALL") screen appears, and
system is paused.
Phone Call ("CALL") screen
When the call ends...
Hang up the phone.
The system resumes playing automatically.
⁄
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <INSTALLATION MANUAL>.
44
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Character Entry
When you select the Set Station Name mode or others, the following screen appears for character entry.
How To Use the Character Entry Screen
Character Entry screen
1
3
1
2
3
4
6
5
7
1 Shifts the cursor.
2 Enters characters.
3 Scrolls up or down the character button
display.
4 Sets the key layout of the character buttons.
abc : Alphabetical key layout.
qwe : Qwerty key layout.
5 Enters a space.
If you erase a character, locate the cursor on
it and touch this button.
6 Clears the character.
7 Exits the Character Entry mode and returns
to the previous screen.
⁄
•
You can enter characters only after you have applied the
parking brake.
English
45
Screen Control
Setting the monitor screen.
Screen Control
⁄
•
The Screen Control screen is displayed only when you
have applied the parking brake.
1
Display Easy Control panel
•
•
The picture quality can be set for each source.
You can set image quality of screens such as menu from
<Monitor Setup> (page 70) of the <Setup Menu>.
2
Display the Screen Control screen
Mode:Full
AV–OUT:AV–IN
DVD VIDEO
SCRN
DVD VIDEO
Title
C ha p
1
1
T
00:00:05
IN
3
Adjust the picture quality
6
D I M
ON
1
2
3
4
5
1
2
3
4
5
OFF
SYNC
7
Return
1 Brightness Control
2 Tint Control
Displayed for an NTSC system image on TV,
Video, iPod, USB or Rear View Camera.
3 Color Control
Displayed on the TV, Video, iPod, USB or
Rear View Camera screen only.
4 Contrast Control
5 Black Level Adjustment
6 Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
7 Returns to the previous screen.
46
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Hands Free Unit Control
Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit
connected only)
•
•
You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
Bluetooth Unit as well
To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of
your Bluetooth Unit and your cell-phone.
2 Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
Control Screen Function
Displaying the control screen and using various
functions.
3 Calls the displayed preset phone number.
4 Displays the SMS Select screen.
See <SMS (Short Message Service)> (page
56).
1
Display the Hands-Free Control screen
5 Displays the Search for Phonebook screen.
See <Calling by Phonebook> (page 50).
6 Displays the Outgoing Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 51).
7 Displays the Incoming Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 51).
8 Calls the preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
55).
Press the [FNC] button for more than 1 second.
1
2
3
4
8
9
5
6
9 Displays the Hands-Free Set Up screen.
See <Setting Up the Hands-Free Phone>
(page 53).
p Displays the Dialing Display screen.
See <Calling by Entering a Phone Number>
(page 48).
11
12
10
7
1 Displays the various conditions.
: Displays short message status. If a cell-
phone which supports SMS function
is not connected, this mark does not
appear.
: There is unread short message.
: There is no unread short message.
: Downloading Phonebook.
: Indicates there is a call on hold.
: Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
: Displays the present Auto Answering
status
: When Auto Answering is on
: When Auto Answering is off
: Displays the battery drain of the cell-
phone.*
q Starts voice recognition.
See <Calling by Voice Recognition> (page
52).
w Returns to the previous screen.
⁄
•
While your car is moving, some functions are disabled for
safety’s sake. The buttons associated with the disabled
functions become ineffective if pressed.
When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
* Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
•
•
The more the number of bar segments,
the higher the battery level.
•
Setting the cell-phone in the private mode can disable
the hands-free function.
English
47
Hands Free Unit Control
When Received a Call
Calling by Entering a Phone Number
When you receive a call, you can use the hands-
free phone.
Makes a call by entering a phone number.
1
Display the number input screen
1
Respond to a call
3
4
1
2
When a call arrives, the Talking screen appears
automatically.
2
Enter a phone number
1 Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
1
2
Resumes conversation with the person on
hold after completed conversation with the
other party.
3
2 Disconnects the phone.
3 Switches the voice output between phone
and speaker.
4
1 Calls the entered phone number.
2 Creates an SMS for the entered phone
number.
4 Outputs dial tone.
See <Controlling Tone-based Services>
(page 49).
See <SMS (Short Message Service)> (page
56).
3 Clears the number.
4 Returns to the previous screen.
3
4
Make a call
You can start talking when the destination
responds.
End the call
The Hand Free screen reappears.
⁄
•
You can input max 32 digits.
48
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Quick Dialing
Controlling Tone-based Services
You can register up to 6 phone numbers for quick
dialing.
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
⁄
1
Display the DTMF input screen
•
Phone numbers must be registered in advance.
See <Phone Number Preset> (page 55).
Display the Talking screen. See <Calling by
Entering a Phone Number> (page 48).
1
Recall the phone number
2
You can send tones during a call
2
Make a call
1
1 Returns to the previous screen.
English
49
Hands Free Unit Control
Calling by Phonebook
Cyrillic alphabet search screen
You can call a person using his/her phone
number that you have registered in the
Phonebook.
5
2
1
Display the Phonebook screen
2
3
5 Displays the Phonebook beginning with
the name whose first character you have
touched.
3
Select the name to call
The Initial Input screen appears.
6
9
8
7
10
2
Select the Phonebook search method
11
12
You can search by the initial of the Phonebook
data.
7
Initial alphabet screen
13
6 Phonebook data list.
1
"REC" turns on for data with voice for voice
recognition already registered.
7 Scrolls the Phonebook data list.
8 Scrolls the name.
2
2
9 Registers the voice for voice recognition to
the selected Phonebook.
3
If there are already 35 voice tag registered
in the same cell-phone, [Record] button is
deactivated.
1 Displays the Phonebook beginning with
the name whose first character you have
touched.
2 Scrolls the character array display.
3 Returns to the Hands-Free Control screen.
See <Voice Registration> (page 54).
p Plays the voice registered in the selected
Phonebook data.
q Deletes the voice registered in the selected
Phonebook data.
Initial number screen
Touch to display the confirmation screen.
Touch [YES] to delete or [NO] to cancel.
w Displays the detail of the selected
Phonebook data.
4
2
e Returns to the Initial Input screen.
2
3
4 Displays a list of numbers in the Phonebook
starting with the selected number.
50
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Making a Call Using Outgoing/Incoming
Call Records
4
Select the phone number to call
14
15
16
Calls by selecting a phone number from the
outgoing or incoming calls list.
1
Display the Outgoing Calls or Incoming
Calls screen
17
r Calls the selected phone number.
t Creates an SMS for the displayed phone
number.
See <SMS (Short Message Service)> (page
56).
y Scrolls the phone number.
u Returns to the Name List screen.
: Outgoing Calls
: Incoming Calls
The Outgoing Calls or Incoming Calls list screen
appears.
5
Make a call
2
Select from calls list
⁄
Example : Outgoing Calls screen
1
•
To use the Phonebook, it must have been downloaded
from the cell-phone. For more details, see the instruction
manual of your Bluetooth Unit and your cell-phone.
Initials including no corresponding name will not be
displayed.
3
4
•
•
5
2
During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
2
6
1 Outgoing Calls list.
2 Scrolls the list.
3 Makes a call to the selected number.
4 Creates an SMS for the selected phone
number. See <SMS (Short Message
Service)> (page 56).
5 Displays the detail of the selected phone
number.
6 Returns to the Hands-Free Control screen.
3
Make a call
⁄
•
The Outgoing Calls list screen or Incoming Calls list
screen shows the list of the calls originated from or
received at this unit. They are not the ones stored in the
cell-phone memory.
English
51
Hands Free Unit Control
If you hear another Beep sound:
Calling by Voice Recognition
Speak the key word within 2 seconds after the
Beep, or touch the [Phonebook List] button to
select the phone number.
Calls by recognizing the registered voice.
⁄
•
In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 54). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 54).
Make a call.
⁄
•
If there are more than one phone numbers registered
under the same name, and the key word voice is
registered for each phone number, you will hear another
beep. For how to register key word, see <Key Word Voice
Registration> (page 54).
1
Display the Voice Recognition screen
If there are more than one phone numbers
registered under the same name, go to step
3.
3
Select a Phone number category
4
6
7
5
2
Utter the voice registered in the
PhoneBook
1
8
2
4 Calls the displayed phone number.
5 Creates an SMS to the displayed address.
See <SMS (Short Message Service)> (page
56).
6 Selects the Phone number category.
7 Scrolls the phone number.
8 Returns to the previous screen.
Utter within 2 seconds after the Beep.
1 Displays the recognized phone number or
address.
4
Make a call
2 Cancels voice recognition.
If the voice recognition is succeeded and
there is only one phone number found:
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
3
Make a call.
3 Displays the phonebook list.
52
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
"ON": Beep is heard.
"OFF":Beep is canceled.
6 Returns to the Hands-Free Control screen.
7 Returns to the "Hands Free Setup 1" screen.
8 Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
1
Display the Hands Free Setup screen
(
"ON")
"ON": Yes.
"OFF":No.
9 Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF":SMS not available.
p Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
54).
2
Setup each item
1
2
q Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 55).
w Returns to the Hands-Free Control screen.
3
4
5
6
⁄
•
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
•
Select the speaker which is further from the microphone
in order to prevent howling or echoes.
7
8
9
10
11
12
1 Moves to the "Hands Free Setup 2" screen.
2 Sets an automatic response time after call
termination. ( "8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
3 Sets a ringing tone output position.
(
"Front R")
"Front L": Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
4 Sets the beep of the incoming call.
(
"ON")
"ON": Beep is heard.
"OFF":Beep is canceled.
5 Sets the beep of the incoming SMS.
(
"ON")
English
53
Hands Free Unit Control
Voice Recognition
5
End voice registration
Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1
Select the name to register
Go through the procedure of <Calling by
Phonebook> (page 50).
1
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
try.
•
1 Selects a name.
"REC" turns on for data with voice for voice
recognition already registered.
Key Word Voice Recognition
Registers the voice to select the Phone number
category by Voice Recognition.
2
3
Display the voice registration screen
1
Display the Key Word List screen
Display the "Hands Free" screen and touch
[Setup]. See <Control Screen Function> (page
47).
Utter the voice to register (1st try)
3
2
2 Registers the voice.
3 Cancels voice registration.
2
Select the Phone number category to
register
2
1
Utter within 2 seconds after the Beep.
3
4
4
Utter the voice to register (2nd try)
5
1 Selects the Phone number category. "REC"
turns on for data with voice for voice
recognition already registered.
2 Registers voice for the selected Phone
number category.
54
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
3 Plays voice registered for the selected
Phone number category.
4 Deletes voice registered for the selected
Phone number category. Touch to display
the confirmation screen. Touch [YES] to
delete or [NO] to cancel.
Phone Number Preset
Registers frequently used phone number to
Hands Free control screen preset button.
1
Display the Hands Free Preset List screen
Display the "Hands Free" screen and touch
[Setup]. See <Control Screen Function> (page
47).
5 Returns to the Hands-Free Set Up screen.
3
4
Display voice registration screen
Utter the voice to register (1st try)
7
2
Select the Preset number to register
6
6 Registers the voice.
7 Cancels voice registration.
Utter within 2 seconds after the Beep.
1
5
6
Utter the voice to register (2nd try)
1 Returns to the Hands-Free Set Up screen.
3
Select the search destination of the
number to register
End voice registration
2
11
3
9
10
4
5
6
7
8
2 Registers from SMS incoming calls list.
3 Registers from SMS outgoing calls list.
4 Registers from Phonebook.
5 Registers from outgoing calls list.
6 Registers from incoming calls list.
7 Registers by entering phone numbers.
8 Registers voice for voice recognition to
preset number.
⁄
•
A message is displayed if the voice is not recognized.
Read tha message for the further operation.
Repeat from 1st try if the voice is different from the 1st
try.
•
Next page 3
English
55
Hands Free Unit Control
9 Registers the currently displayed phone
number.
p Deletes the currently displayed phone
number.
SMS (Short Message Service)
Uses SMS function.
1
Display the SMS Select screen
q Returns to the previous screen.
4
5
Search phone number to register with
each function
Register phone number
2
Select a function
1
2
3
4
⁄
•
Press [Delete] to delete the registered phone number.
5
1 Displays received message list.
2 Displays sent message list.
3 Displays the Message screen. If there is an
unfinished message, the button will be
active.
4 Retrieves SMS messages from the cell-
phone.
5 Returns to the Hands Free screen.
3
Select message to display
6
7
9
8
8
6 Calls the number in the selected message.
7 Creates a new message for the selected
message.
8 Scrolls the list.
9 Displays the selected message.
56
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
SMS Message screen
10
11
12
12
13
p Calls the number in the selected message.
q Creates a new message for the selected
message.
w Scrolls the message.
e Returns to the previous screen.
4
Create a message
15
14
17
14
17
18
16
19
20
21
22
r Moves the cursor.
t Displays remaining number of characters
allowed.
y Enters character.
u Changes keyboard character type.
i Sends the message.
o Sets the key layout of the character buttons.
abc : Alphabetical key layout.
qwe : Qwerty key layout.
; Enters space.
a Erases the entered character.
If pressed more than 1 second, all the input
characters are erased.
s Returns to the previous screen.
English
57
Setup Menu
You can set up various receiver parameters.
Setup Menu
Audio Setup
Displays the Setup menu to set various functions.
You can setup a speaker network, etc.
1
Display the control screen of any source
1
Display the Audio SETUP screen
Touch
in the "Setup
Menu" screen (page 58).
⁄
•
[Audio Setup] cannot be selected under the following
conditions:
– When no source is selected.
– When dual zone function is set to on. See <Zone
Control> (page 82)
Touch any source button on the "Source Select"
screen.
2
Setup each item
2
Display the Setup Menu
1
2
3
4
1 Selects the speaker to set the crossover. See
<Crossover Network Setup> (page 59).
2 Sets the availability of subwoofers. This can
be selected only when Preout is set to "Sub".
See <System Setup> (page 62).
3 Selects the type of front speakers.
"Standard": Setup for general diameter
speakers
3
Select the setup item
1
2
2
"Narrow": Setup for small diameter
speakers
"Middle": Setup for middle diameter
speakers
1 The selected setup screen appears.
2 Scrolls the setup menu.
"Wide":
Setup for large diameter
speakers
⁄
•
[Audio Setup] and [AV Interface] options can be locked.
The key mark ( ) is displayed in reverse video for the
locked option. See <Setup Memory> (page 79).
4 Switches to the crossover setup screen.
See <Crossover Network Setup> (page 59).
58
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Crossover Network Setup
DVD Setup
You can set a crossover frequency of speakers.
You can set up the DVD play.
1
Select the speaker to set the crossover
1
Display the DVD Setup screen
Touch
in the "Setup
Menu" screen (page 58).
1
2
1
2
2
Setup each item
1
2
3
4
5
4
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
1 Moves to the "DVD Setup 2" screen.
2 Selects a disc menu language.*1
(See <Language Setup>, page 60)
3 Selects a subtitle language.*1
(See <Language Setup>, page 60)
4 Selects an audio language.*1
(See <Language Setup>, page 60)
2
3
Display the Crossover setup screen
Set the crossover
5 Sets the dynamic range.*1 ( "Wide")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
5
6
7
5 Sets the cross over frequency.
When front speaker or rear speaker is
selected in step 1:
The operation is available during the play
stop mode.
High Pass Filter adjustment
When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
6 Sets the sub woofer phase. (Only when
"Subwoofer" is set to "ON" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
7 Returns to the "Audio Setup" screen.
Next page 3
English
59
Setup Menu
Language Setup
6
7
Selects a language you use for the speech and
menus.
8
9
1
Select the language item to set
10
See <DVD Setup> (page 59) and select [Menu
Language], [Sub Title Language] or [Audio
Language].
6 Returns to the "DVD Setup 1" screen.
7 Sets an angle mark display. ( "On")
8 Selects the screen display mode.*1 (
"16:9")
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at
the top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut
at the right and left ends).
2
Display the Language Setup screen
9 Displays the Parental Lock screen.*1 (
"Off")
2
1
(See <Parental Level Setup>, page 61)
p Keep "Auto" to use.*1
4
⁄
•
*1 Disabled when a DVD is being played.
3
5
1 Enters a language code.
2 Cancels the language setup and returns to
the "DVD Setup 1" screen.
3 Sets the original audio language.
(It appears during Audio Language setup.)
4 Sets the language and returns to the "DVD
Setup 1" screen.
(It appears after you have entered a
language code.)
5 Clears the language code.
3
4
Enter a language code
See <DVD Language Codes> (page 89) and
select the desired language.
Set the language you use
60
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
4
Select a parental level and complete the
setup
Parental Level Setup
Sets a parental level.
1
Display the Parental Level code number
screen
6
6
See <DVD Setup> (page 59) and touch
[Parental Level].
7
6 Selects a parental level.
7 Complete the parental level setup and
returns to the "DVD Setup 2" screen.
⁄
•
•
•
If a disc has higher parental lock level, you need to enter
the code number.
The parental lock level varies depending on a loaded
disc.
If a disc has no parental lock, anybody can play it back
even when you have set the parental lock.
2
Enter the code number
1
2
3
4
5
1 Enters a code number.
2 Cancels the current setup and returns to
the "DVD Setup 2" screen.
3 Indicates the present parental lock level.
4 Determines the code number and displays
the Parental Level setup screen.
5 Clears the code number.
⁄
•
•
The number you enter first is set as your code number.
You can clear the code number by pressing the Reset
button.
3
Display the Parental Level Setup screen
English
61
Setup Menu
DivX Setup
System Setup
Checks the registration code. This code is needed
when making a disc which has DRM (Digital
Rights Management).
You can set up the system parameters.
1
Display the System Setup screen
Touch
Menu" screen (page 58).
in the "Setup
1
Display the DivX Setup screen
Touch
Menu" screen (page 58).
in the "Setup
2
Setup each item
1
2
3
4
5
1
1 Moves to the "System Setup 2" screen.
2 Turns the key touch tone On or Off.
(
"ON")
1 Displays the registration code.
3 Allows scrolling of text display on the
⁄
Source Control screen. ( "Auto")
•
When downloading a DivX VOD file controlled by DRM,
register the code appeared on the screen such as the
one above. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is displayed
when playing a DivX VOD file with the viewing restriction.
When the remaining number of viewing reached 0, a
warning message appears and the file cannot be played.
"Auto":
Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
4 Selects a remote control signal. ( "ON")
When turned "OFF", the remote control of
TV reception is rejected.
5 Sets a music CD playback. ( "1")
"1": Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
⁄
•
You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
•
Your setup is disabled when the disc is being played.
62
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
6
7
15
16
8
9
10
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See <Panel Color Coordinate> (page 63).
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
t Returns to the "System Setup 3" screen.
y Selects a picture display time. ( "Middle")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
p Select an illumination color of receiver
buttons. ( Red)
Panel Color Coordinate
Sets the screen and button illumination color.
"Green": Green
"Red": Red
1
Display the Panel Color Coordinate screen
11
12
13
14
See <System Setup> (page 62).
2
Select a color
1
q Returns to the "System Setup 2" screen.
w Moves to the "System Setup 4" screen.
e Sets the Preout output. (Settable only when
in Standby mode)
"Rear" :
"Sub" :
Rear sound is output.
Subwoofer sound is output.
r Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for
more than 1 second to turn the
display off.
2
3
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
Next page 3
English
63
Setup Menu
To register your original color
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
1
Start the RGB coordinate
1
2
Display the AV Interface screen
Touch
in the "Setup
2
Adjust the each color value
Menu" screen (page 58).
Setup each item
2
3
1
2
3
4
4
1
5
1 Selects a preset number to register.
2 Adjusts the Red value.
3 Adjusts the Green value.
4 Adjusts the Blue.
1 Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port. ( "VIDEO")
5 Returns to the "Panel Color Coordinate"
screen.
3 Sets an image display of the system that is
connected via the AV INPUT port. ( "OFF")
"OFF":When the image source is switched,
an image entered via the AV INPUT
port is displayed.
3
Select a Preset number to register
"ON": When an image signal is entered
via the AV INPUT port, this image is
displayed.
4 Selects a navigation system connection.
(
"RGB")
Adjusted color is registered to the selected
Preset button.
"RGB":Allows the Kenwood's Navigation
System to connect via the AV INPUT
port.
4
Complete the color coordination
"AV-IN": Allows a third-party navigation
system to connect via the AV INPUT
port.
"Off": Must be used if no navigation
system is connected. (The
navigation display is cancelled
when the AV source is switched.)
64
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
#
: Press for # seconds.
5
11
6
7
8
12
13
14
9
10
5 Returns to the "AV Interface 1" screen.
6 Moves to the "AV Interface 3" screen.
7 Selects an AV source to be output at the AV
OUTPUT port. ( "AV-IN")
q Returns to the "AV Interface 2" screen.
w Selects speakers used for voice guidance of
the navigation system. ( "Front L")
"Front L": Uses the front left side speaker
for voice guidance.
⁄
"Front R": Uses the front right side speaker
for voice guidance.
"Front LR": Uses both front speakers for
voice guidance.
•
When in DVD source, "AV-OUT" cannot be set to USB. Or,
when in USB source, "AV-OUT" cannot be set to DVD.
If "AV-OUT" is set to DVD or USB, the same source video
or control screen as the front monitor is displayed in the
rear monitor.
•
e Adjusts the volume for voice guidance of
the navigation system. ( "21")
r Mutes the volume during voice guidance of
the navigation system. ( "ON")
When turned "ON", the volume level drops
for voice guidance.
•
If the front source is switched from DVD (or USB) to
another source, the rear source is also switched to
the same source as front. In this case, displaying the
navigation screen in front monitor allows the rear source
to return to the DVD (or USB). Use the easy control
buttons to operate the front source.
8 Sets output of operation screen such as
control screen to AV-OUT . Operation screen
is not output when set to "Black".
(
"Through")
9 Sets a method to switch to the rear view
camera video display. ( "OFF")
"ON": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"OFF":Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [NAV] button for
more than 1 second.
p You can flip the left and right of the rear
view camera video display. Set to "ON" and
the the rear view will be displayed left and
right in mirror image on the screen.
(
"OFF")
English
65
Setup Menu
8 Sets an on-screen display of the iPod
Playback screen. ( "Auto")
User Interface
You can set up user interface parameters.
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when you
touch on the screen.
1
Display the User Interface screen
Touch
in the "Setup
Menu" screen (page 58).
9 Sets an on-screen display of the navigation
screen. ( "Off")
2
Setup each item
"Auto": Information is displayed for 5
seconds when updated.
"Off": Information is not displayed.
p Sets an on-screen display of the video
playback screen. ( "Auto")
1
2
3
4
5
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when you
touch on the screen.
1 Moves to the "User Interface 2" screen.
2 Selects the background to display.
"Change": Displays images entered into this
unit. See <Background Select>
12
11
13
14
15
(page 69).
3 Enables entering or deleting of background
images into or from this unit.
Press
to enter the USB suspend
mode, and then remove the USB device.
"Memory": Enables entering of background
images. See <Entering
q Returns to the "User Interface 2" screen.
w Moves to the "User Interface 4" screen.
e Sets an on-screen display of the DVD
Playback screen. ( "Manual")
Background> (page 68).
"Delete": Enables deleting of background
image entered into this unit. See
<Background Delete> (page 68).
4 Sets whether to display the target when
touching the panel.
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when you
touch on the screen.
5 Sets the display method of the
unrecognized characters.
r Sets an on-screen display of the TV screen.
"ON": Displays in the Russian character.
"OFF": Displays in the European character.
(
"Auto") (with the optional accessory TV
tuner connected only)
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when you
touch on the screen.
6
7
8
t Sets an on-screen display of the USB screen.
9
(
"Manual")
10
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when you
touch on the screen.
6 Returns to the "User Interface 1" screen.
7 Moves to the "User Interface 3" screen.
66
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Direct Source Button Setup
16
17
18
Registers the source displayed in the favorite
source screen.
1
Displays the Direct SRC button Setup
screen
y Returns to the "User Interface 3" screen.
u Sets whether to display the name of the
,
,
, and
buttons on the
right side of the menu screen.
i Registers the source displayed in the
favorite source screen.
See <Direct Source Button Setup> (page
67).
See <User Interface> (page 66).
2
Select a preset button
2
3
3
1
4
1 Selects the preset button to register.
2 Selects the source to register.
3 Scrolls the source button list.
4 Returns to the "User Interface 4" screen.
3
Select a source to register
4
Complete the registration
The selected source is registered to the preset
button.
English
67
Setup Menu
Entering Background
Background Delete
Loads a image for background.
Deletes the background image.
1
2
Connect the device which has the image to
load
1 Delete the image you have loaded
Display the User Interface screen
Touch
in the "Setup
Menu" screen (page 58).
3
Display the Background Memory screen
2
Confirm
1
4
Select the image to load
1 Returns to the Pictrue Select screen.
1
3
2
4
2
5
1 Lists the files.
2 Scroll the list.
3 Returns to Media Select screen.
4 Returns to the previous folder.
5 Returns to the "User Interface" screen.
5
Load the image
7
6
6
6 Rotates the image.
7 Returns to the Picture Select screen.
⁄
•
See <About Picture files> (page 8) for readable image
specifications.
•
This operation is not possible when USB/DVD is selected
as the source.
68
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Background Select
Touch Panel Adjustment
Selects a image for background.
You can adjust the touch panel operations.
1
Select Background Change screen
1
Display the Touch panel Adjustment
screen
Touch
in the "Setup
Menu" screen (page 58).
2
Start Touch panel setup
2
Select a image for background
2
1
3
Adjust the Touch panel
1 Returns to the initial background.
2 Returns to the original screen.
1
2
3
Set the image as the background
Follow the instruction on the screen and touch
the center of
.
1 Cancels the adjustment and returns to the
Touch Panel Adjust screen.
2 Resets to the initial status.
English
69
Setup Menu
Clock Setup
Monitor Setup
You can adjust the clock time.
You can adjust the position, picture quality and
the screen mode of the monitor.
1
Display the Clock Setup screen
1
2
Displaying the Monitor SETUP screen
Touch
Menu" screen (page 58).
in the "Setup
Touch
in the "Setup
Menu" screen (page 58).
2
Setup the Clock
Setup each item
1
5
2
3
3
2
1
2
4
3
4
5
1 Clock time display
2 Adjusts hours.
3 Adjusts minutes.
4 Sets "00" minute.
1 Moves to "Angle Control" screen.
2 Brightness control
3 Contrast Control
Setup examples: 3:00 – 3:29 \ 3:00
4 Black Level Adjustment
5 Dimmer Mode Setup
3:30 – 3:59 \ 4:00
5 Sets the clock time in synchronization with
the time data sent from the navigation
system or the RDS station. (KVT-522DVD/
KVT-522DVDY/KVT-50DVDRY with KNA-
G520, KNA-G420 or KNA-G421)
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
Sets the clock time in synchronization with
the time data sent from the RDS station.
(KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
with KNA-DV3200 or KNA-DV2200)
When the synchronized mode is set, the
clock cannot be adjusted manually.
⁄
•
In this Screen Control screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 46).
3
Adjust the clock time
6
7
8
9
10
11
6 Returns to the "Screen Adjust" screen.
7 Moves to "Mode Select 1" screen.
8 Monitor Angle Adjustment
9 Forward/Backward Monitor Position
Adjustment
p Monitor Open/Close Setup
When turned "ON", the monitor is opened
or closed automatically when you turn on
70
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
or off the ignition key.
q Monitor Action Setup
When set to "Quick", the monitor is opened
quickly.
"Full", "Just", "Zoom", "Normal"
; Selects a screen mode of the rear view
camera (R-CAM) screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
⁄
13
12
14
15
16
•
When you select the Menu or Navigation, the display is
shown in the full-size display mode automatically. The
screen mode of these displays cannot be changed.
The picture quality can be set for each source.
•
Full picture mode ("Full")
w Returns to the "Angle Control" screen.
e Moves to the "Mode Select 2" screen.
r Selects a screen mode of the DVD playback
screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
t Selects a screen mode of the iPod VIDEO
playback screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
y Selects a screen mode of the USB playback
screen.
Zoom picture mode ("Zoom")
Justify picture mode ("Just")
Normal picture mode ("Normal")
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
17
18
19
20
u Returns to the "Mode Select 1" screen.
i Selects a screen mode of the TV screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
o Selects a screen mode of the VIDEO
playback screen.
You can select any of the following screen
mode.
English
71
Setup Menu
4
Register your security code
Reenter the security code
Security Code Setup
You can set a security code to protect your
receiver system against theft.
⁄
•
When the Security Code function is activated, it cannot
be released.
5
Note that your Security Code is in the 4 digit number
entered in your "Car Audio Passport" in this package.
Reenter the same security code as that you
have entered in Step 3 for confirmation.
1
Display the Security Code Setup screen
⁄
Touch
Menu" screen (page 58).
in the "Setup
•
If you enter a different security code, the screen returns
to Step 3 (for the first code entry).
6
Register the security code again
1
2
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "ON", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
"ON")
2
Start Security Code setup
⁄
•
If you have already completed the code registration, you
cannot touch
.
3
Enter a security Code
Input four-digit number.
72
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
iPod Setup
Performs setup when using iPod.
1
Display the iPod Setup screen
1
Enter the correct security code
Touch
in the "Setup
Menu" screen (page 58).
2
Setup each item
1
2
You must enter the same security code as that
you have entered in Step 3.
2
Enter the security code
1 Sets the Audio book playback speed.
2 Sets Wide Screen on or off.
⁄
•
"Wide Screen" cannot be set while the iPod is connected.
Now, you can use your Receiver.
⁄
•
If you enter an incorrect security code, you cannot use
your Receiver for a while.
Incorrect entry count
Receiver inoperable time
1
-
2
3
5 minutes
1 hour
24 hours
4 or more
English
73
Setup Menu
TV Setup
RDS Setup
The TV signal receiving areas can be set. (with the
optional accessory TV Tuner connected only)
You can set RDS related parameters.
1
Display the RDS Setup screen
1
2
Displaying TV Setup screen
Touch
Menu" screen (page 58).
in the "Setup
Touch
Menu" screen (page 58).
in the "Setup
2
Setup each item
Setting up TV
1
2
3
1
4
5
2
1 Moves to "RDS Setup 2" screen.
1 Moves to "TV2 Area Set" screen.
2 Sets a news bulletin interrupt time.
2 Sets the present TV1 receiving area.
3 Turns the Alternative Frequency function
On or Off. ( "ON")
4 Turns the Region Restriction function On or
Off. ( "ON")
5 Turns the Auto TP Seek function On or Off.
3
(
"ON")
4
6
7
3 Returns to the "TV1 Area Set" screen.
4 Sets the present TV2 receiving area.
6 Returns to the "RDS Setup 1" screen.
7 Selects a display language for the PTY
function.
74
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Bluetooth Setup
Registering Bluetooth Unit
Registers and selects Bluetooth unit.
Registers the Bluetooth unit to be connected.
1
Display the Bluetooth Setup screen
1 Display the Connect Device List screen
Touch
in the "Setup
Menu" screen (page 58).
2
Setup each item
1
2
2
Search for a Bluetooth unit
1
2
1 Sets cell-phone for Hands Free and Audio
player for Bluetooth Audio.
2 Sets the PIN code of Bluetooth unit to enter
when registering (pairing) from the cell-
phone or audio player side.
3
4
5
1 Displays the registered Bluetooth unit.
Displays the busy service in red. Displays
the available service in gray.
2 Scrolls the name of the Bluetooth unit.
3 Searches for Bluetooth unit.
4 Registers Bluetooth unit that cannot be
registered by normal register (paring)
operation.
5 Returns to the previous screen.
⁄
•
A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Deleting Bluetooth Unit> (page 78).
3
Select the Bluetooth unit to register
6
7
8
9
10
10
11
6 Displays the searched Bluetooth unit.
7 Scrolls the name of the Bluetooth unit.
8 Cancels searching of Bluetooth unit.
9 Starts search.
p Scrolls.
Next page 3
English
75
Setup Menu
q Returns to the previous screen.
Registering Bluetooth Unit PIN Code
4
Enter PIN code
Sets the PIN code of the Bluetooth unit to enter
when registering (pairing) from the cell-phone or
audio player side.
Enter the PIN code specified for the Bluetooth
unit to register.
1
Display the Receiver PIN Code screen
12
13
14
15
w Enters a code number.
e Cancels registration of PIN code.
r Enters PIN code.
2
Enter PIN code
t Clears the code number.
1
2
⁄
•
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 76).
3
4
•
If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth Unit> (page
77).
1 Enters a code number.
2 Cancels registration of PIN code.
3 Enters PIN code.
4 Clears the code number.
76
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Bluetooth Unit Connection
Registering Special Bluetooth Unit
Selects the Bluetooth unit to connect.
Registers Special Bluetooth unit that results in
error by normal operation by selecting from
model name.
1
Display the Connect Device List screen
1
Display the Special Device List screen
2
Select a registered Bluetooth unit
2
Select a model name
1
2
1
2
3
3
3
1 Displays the registered Bluetooth unit.
2 Scrolls the name of the Bluetooth unit.
3 Returns to the previous screen.
4
1 Displays the Bluetooth unit name that can
be registered.
2 Scrolls the name of the Bluetooth unit.
3 Scrolls.
3
Select the service to use
4 Returns to the previous screen.
4
5
3
Confirm whether to register
6
7
4 Connects/disconnects cell-phone to use for
Hands Free.
5
5 Connects/disconnects Audio player to use
for Bluetooth Audio.
6 Deletes registration (pairing).
7 Returns to the previous screen.
5 Cancels registration.
⁄
•
Only models in Bluetooth unit name list can be
registered.
4
Go through the procedure of <Registering
Bluetooth Unit> (page 75) and complete
the registration (pairing).
English
77
Setup Menu
Deleting Bluetooth Unit
Software Information
Deletes the registered Bluetooth unit.
Checks the software version of this unit.
1
Display the Connect Device List screen
1
Display the Software Information screen
Touch
in the "Setup
Menu" screen (page 58).
---------
1
2
Select a Bluetooth unit to delete
1 Displays the software version.
3
Delete the Bluetooth unit
4
Confirm deleting of Bluetooth unit
78
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
3
Memorize or recall the settings
Setup Memory
Audio Setup and AV Interface settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
When memorizing the Audio Setup and AV
Interface settings:
1
Display the Setup Memory screen
If settings have already been memorized, a
confirmation message appears. Touch
To cancel memorization, touch
.
Touch
Menu" screen (page 58).
in the "Setup
.
When recalling the memorized settings:
1
2
Touching the screen displays a confirmation
message. Touch
touch
. To cancel recalling,
.
When clearing the currently memorized
settings:
1 Locks the Audio Setup and AV Interface
settings. When is selected, you
cannot set the Audio Setup and AV
Interface settings.
2 Memorizes or recalls the settings. To cancel
Touching the screen displays a confirmation
message. Touch
touch
. To cancel clearing,
the function, touch
memorization, touch
. To cancel
.
.
The "Setup Menu" screen appears again.
4
Quit memorization/recalling of settings
2
Start Setup Memory
6
3
4
5
3 Recalls the memorized settings.
4 Memorizes the current Audio Set Up and AV
Interface settings.
5 Clears the currently memorized settings.
6 Returns to "Setup Memory" screen.
English
79
Audio Control
Audio Control Menu
Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
1
Display the control screen of any source
1
2
Display Audio Control screen
Touch
in the "Audio
Control Menu" screen (page 80).
Set the each item
1
4
5
2
6
Touch any source button on the "Source Select"
screen.
3
3
2
Display the Audio Control menu
4
1 Moves to the "Audio Control 2" screen.
2 Adjust the front/back and left/right volume
around the touched area.
3 Adjusts the right and left volume balance.
4 Adjusts the front and rear volume balance.*
5 Turns the Loudness control function On or
Off.*
If turned "ON", high and low tones are
automatically enhanced during low volume.
6 Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
3
Select the Audio Control item
1
1 Switches to the selected Audio Control
screen.
80
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Equalizer Control
7
8
9
You can set up the equalizer.
1
Display Equalizer Control
Touch
in the "Audio
Control Menu" screen (page 80).
2
Display the Equalizer screen
7 Returns to the "Audio Control 1" screen.
8 Adjusts the subwoofer volume.*
9 Adjusts the volume of the present source
based on the difference level of original
volume.
1
2
⁄
3
•
*Settable Only when zone function is set to Off. See
<Zone Control> (page 82).
•
If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if
you suddenly switch to another source may be extremely
loud.
1 Selects an equalizer curve type.
You can select any of the following
equalizer curves.
• "Natural"
• "Rock"
• "Pops"
• "Easy"
• "Top40"
• "Jazz"
• "User"
⁄
•
"User" can be selected after tone adjustment is carried
out. See <Tone Setup> (page 82).
2 Selects items to be adjusted for tone curve
setup.
If turned "OFF", only Level can be setup for
tone curves.
3 Displays the Tone curve setup screen. (page
82)
English
81
Audio Control
Tone Setup
Zone Control
You can set a Tone curve.
You can set the front and rear audio source.
1
Display the Tone screen
1
Display Zone Control
Touch
in the "Audio
Control Menu" screen (page 80).
1
See <Equalizer Control> (page 81).
2
Set the Tone
1
1 Displays the current source.
2
3
4
5
6
2
Set the Zone Control
7
2
8
9
3
1 Tone curve becomes flat.
3
4
2 Bass adjustment items are displayed.
3 Middle adjustment items are displayed.
4 Treble adjustment items are displayed.
5 Sets the Center frequency.
6 Sets the level.
7 Sets the Q factor. (Only Bass and Middle can
be set)
8 Bass DC Extend settings (Only when Bass is
selected)
2 Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
3 Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
If turned "ON", it extends the bass
center frequency to the low register by
approximately 20%.
⁄
•
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
9 Returns to the "Equalizer" screen.
4 Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
82
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
⁄
•
There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 58) and <Equalizer Control>
(page 81) are not available.
- When "DVD" or "USB" is selected as the front source, the
rear source can be selected from "Front" (same source
as front), "iPod" or "VIDEO", etc. When the rear source is
set to "Front", "DVD" or "USB", the same source screen or
control screen is displayed in the rear monitor. See <AV
Interface Setup> (page 64).
English
83
Remote Controller
For KVT-522DVDY/KVT-50DVDRY : This unit can be operated using the Remote Controller supplied with this
unit.
For KVT-522DVD : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit.
¤
•
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
Do not place the battery near an open flame or heat source. This may cause the battery to explode.
Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
•
•
•
Battery installation
Remote Controller mode switch
Use two "AAA"/"R03"-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
The functions operated from the remote
controller differ depending on the position of the
mode switch.
AUD mode
Switch to this mode when
controlling a selected source
or tuner source, etc.
O
AUD
DVD
T V
•
•
•
DVD mode
TER
Switch to this mode when
playing DVDs or CDs etc.
with the player integrated in
this unit.
O
O
TV mode
Switch to this mode when
controlling TV.
⁄
•
If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
⁄
•
The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
When controlling a player that is not integrated in the
unit, select "AUD" mode.
•
84
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
OPEN
Common operations (AUD mode)
Opens or closes the monitor each time you press
Source switching
Switches to the source to be played.
the key.
O
AUD•
DVD•
T V•
ENTER
DISP
O
SRC
V.SEL
O
ME FNC/PBC
AM−
OPEN
FM
+
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
VOL
AUDIO
SUBTITLE
ꢀꢁ
ꢂ
Cursor key
Volume control
Moves the cursor when displaying menu.
Adjusts the volume.
ꢀꢁ
ꢂ
O
O
O
AUD•
DVD•
T V•
AM−
OPEN
FM
+
EN
VOL
O
ꢃ
ꢄ
D
Y
O
AM−
FM
+
2ZN
1
2ABC 3DEF
ENTER
Enters options.
Volume attenuator
Press the key once to lower the volume. Press again
to restore the previous volume.
ꢀꢁ
ꢂ
O
AUD
DVD
T V
•
R.VOL
•
•
ENTER
7PQRS 8TUV 9WXYZ
ꢀ
O
CLEAR
DIRECT
ATT
0
O
AM−
OPEN
FM
+
Hands-free communication
Enters the dialing method selection mode.
When a call comes in, it answers the call.
Dual Zone
Switches the Dual Zone function ON and OFF.
−
OPEN
FM
+
O
VOL
AM−
OPEN
FM
+
ꢃ
ꢄ
D
Y
O
VOL
ꢃ
ꢄ
D
Y
O
2ZONE
1
2ABC 3DEF
1
ꢅ
ZONE
ꢁ
1
2ABC 3
4GHI 5JKL 6MNO
1
ꢅ
R.
ꢁ
Function
Rear volume control
Switches the function screen.
Adjusts volume at rear when the Dual Zone
function is ON.
DISP
2ZONE
1
2ABC 3DEF
SRC
V.SEL
1
ꢅ
MODE FNC/PBC
ꢁ
R.VOL
ꢀ
4GHI 5JKL 6MNO
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SU
7PQRS 8TUV 9WXYZ
ꢀꢁ
ꢂ
CLEAR
DIRECT
A
0
MODE
Switches the screen mode.
Screen mode changes each time you press this key.
V.SEL
Switches to the navigation screen.
DISP
SRC
V.SEL
DISP
MODE FNC/PBC
SRC
V.SEL
TOP MENU
MENU
DVD SETUP
ANGLE
ZOOM
MODE FNC/PBC
AUDIO
SUBTITLE
TOP MNU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
ꢀꢁ
ꢂ
UBTITLE
ꢀꢁ
ꢂ
English
85
Remote Controller
CD
DVD/VCD/CD/Audio files (DVD mode)
Track number
Play time
Cancel
Folder search
Selects the folder to be played.
O
O
AM−
OPEN
FM
+
VOL
Audio files
D
Y
O
Folder number
File number
Cancel
2ZONE
1
2ABC 3DEF
1
ꢅ
Track search and file search
Selects the track or file to be played.
VCD 1.X, VCD 2.X (PBC OFF)
O
O
AM−
OPEN
FM
+
VOL
Track number
Cancel
ꢃ
D
Y
O
2ZONE
23DEF
ꢅ
VCD 2.X (PBC ON)
Play/Pause
Pauses the track.
Press again to resume playing.
Scene number
Number
Cancel
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
SUBTITLE
ZOOM
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
ꢀꢁ
ꢂ
O
AUD
•
•
•
DVD
T V
ENTER
Stop
Numeric keypad
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
ꢄ
Y
2ZONE
1
2ABC 3DEF
1
ꢅ
ꢁ
R.VOL
ꢀ
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
4GHI 5JKL 6MNO
SUBTITLE
7PQRS 8TUV 9WXYZ
ꢀꢁ
ꢂ
CLEAR
DIRECT
ATT
0
O
AUD
•
•
•
DVD
T V
ENTER
•
•
Specify the number to search in direct search.
Direct search
1
2ABC
Press
to fast forward/backward.
R.VOL
Switches the fast forward/backward speed each
time you press this key.
7
PQRS 8TUV 9WXYZ
ꢀ
CLEAR
DIRECT
ATT
0
•
Press
4GHI
5JKL
to slow forward/backward.
Switches the slow playback speed each time you
press this key.
Pressing this button switches the features that can
be searched directly.
DVD Top Menu
Returns to the DVD top menu.
DVD
Title number
Chapter number
Play time
Item number*
Cancel
DISP
SRC
V.SEL
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AU
UBTITLE
ꢀꢁ
ꢂ
* You may not be able to use this function with some discs
or scenes.
86
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
DVD Menu
Displays the DVD menu.
TV (TV mode)
Switching Band/Video
It switches between the station of the TV band to
Turns the playback control on or off while playing
VCD.
receive and video input.
DISP
SRC
V.SEL
MODE FNC/PBC
O
O
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AM−
OPEN
FM
+
VOL
AUDIO
SUB
ꢃ
ꢄ
O
ꢀꢁ
ꢂ
2ZONE
1
2ABC 3DEF
1
ꢅ
SUBTITLE
Switches the subtitle language.
Channel Selection
DISP
The TV channel to receive is selected.
SRC
V.SEL
MODE FNC/PBC
O
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
O
AM−
OPEN
FM
+
AUDIO
SUBTITLE
VOL
ꢃ
D
Y
ꢀꢁ
O
2ZONE
23DEF
ꢅ
ZOOM
Direct tuning
(NTSC TV type only)
Switches the zoom ratio each time you press this
key.
DISP
R.VOL
SRC
V.SEL
7PQRS 8TUV 9WXYZ
ꢀ
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
CLEAR
DIRECT
ATT
0
AUDIO
SUBTITLE
ꢀꢁ
ꢂ
Press this key first, and then specify the station to
receive with the numeric keypad.
Picture Angle
Switches the picture angle each time you press this
key.
Example: In case of Channel 6 (2-digit)
0
6MNO
DISP
SRC
V.SEL
Numeric keypad
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
ꢄ
Y
ꢀꢁ
ꢂ
2ZONE
1
2ABC 3DEF
1
ꢅ
ꢁ
R.VOL
ꢀ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
AUDIO
Switch Voice Language
CLEAR
DIRECT
ATT
0
Switches the voice language each time you press
this key.
•
•
The number of the memorized station is
1
selected. (
–
6MNO
)
DISP
SRC
V.SEL
MODE FNC/PBC
Press the direct tuning key first, then specify the
channel of the station to receive.
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
SUBTITLE
ꢀ
ꢂ
English
87
Remote Controller
Radio (AUD mode)
Band switching
Switches to bands received by the unit.
O
O
AM−
OPEN
FM
+
VOL
D
Y
O
2ZONE
1
2ABC 3DEF
1
ꢅ
Station selection
Switches to broadcast stations received by the unit.
O
O
AM−
OPEN
FM
+
VOL
ꢃ
D
Y
O
2ZONE
23DEF
ꢅ
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
R.VOL
7PQRS 8TUV 9WXYZ
ꢀ
CLEAR
DIRECT
ATT
0
Example: 92.1MHz (FM)
9WXYZ
2ABC
1
0
0
Example: 810kHz (AM)
8TUV
1
0
Numeric keypad
ꢄ
Y
2ZONE
1
2ABC 3DEF
1
ꢅ
ꢁ
R.VOL
ꢀ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
ATT
0
•
•
To use preset tuning, press the number of a
1
programmed broadcast station. (
–
6MNO
)
Press the direct tuning key first, then specify the
frequency of the station to receive.
88
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
DVD Language Codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Code
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Language
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Code
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Language
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
lb
ln
lo
lt
te
Telugu
Tajik
Thai
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
lv
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
eu
fa
fi
fj
fo
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
fr
fy
Yoruba
Chinese
Zulu
ga
gd
gli
gn
gu
ha
he
hi
hr
hu
hy
ia
Polish
ps
pt
qu
rm
rn
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Hebrew
Hindi
ro
ru
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
rw
sa
sd
sg
sh
Sindhi
Sangho
Serbo-Croatian
ie
ik
id
English
89
Help?
Troubleshooting
Some functions of this unit may be disabled by
some settings made on this unit.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
!
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
General
?
The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
Subwoofer is not set to On. ☞ <Audio Setup>
(page 58)
☞
The Touch Sensor Tone can’t be output from
the preout jack.
Preout is set to "Rear". ☞ <System Setup> (page
62)
Tuner source
The Dual zone function is enabled. ☞ <Zone
Control> (page 82)
?
Radio reception is poor.
✔
The car antenna is not extended.
Pull the antenna out all the way.
!
!
Cannot set up the subwoofer phase.
Subwoofer is not set to On. ☞ <Audio Setup>
(page 58)
☞
✔
The antenna control wire is not connected.
☞
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
Low pass filter is set to Through. ☞ <Crossover
Network Setup> (page 59)
Disc source
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear
speakers.
?
The specified disc does not play, but another
one plays instead.
✔
The specified disc is quite dirty.
Clean the disc.
The Dual zone function is disabled. ☞ <Zone
Control> (page 82)
☞
✔
The disc is severely scratched.
Try another disc instead.
☞
!
!
Cannot play audio files.
"CD Read" of <System Setup> (page 62) is set
to "2".
Audio file source
?
The sound skips when an Audio file is being
played.
Cannot Folder select.
The Scan play or Random play function is
enabled.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 6).
!
!
Cannot perform Repeat play.
The PBC function is enabled.
✔
The recording condition is bad.
☞
Record the media again or use another
media.
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The Dual zone function is enabled. ☞ <Zone
Control> (page 82)
Navigation
?
The touch panel control of the navigation
system does not work.
!
Cannot watch the source selected as AV-OUT
in the rear monitor.
A source control screen is displayed in front. ☞
<AV lnterface Setup> (page 64)
✔
Navigation software is not the latest version.
☞
Update the navigation software. For how to
update the software, refer to the instruction
manual of the navigation unit.
"AV-OUT Graphic Output" of <AV Interface
Setup> is set to "Black".
90
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Help?
Error
Error 07–67:
When the unit fails to operate correctly, the
cause of the failure appears on the display.
The unit is not operating correctly due to some reason
or other.
Protect :
➡ Push the unit's Reset button. If the "Error 07−67"
message does not disappear, see your nearest
Kenwood dealer.
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
No Device (USB device)/Disconnected (iPod):
The USB device/iPod is selected as a source although
no USB device/iPod is connected.
➡ Change the source to any source other than
USB/iPod. Connect an USB device/iPod, and
change the source to USB/iPod again.
➡ Wire or insulate the speaker cord as appropriate
and then push the Reset button (page 6).
Hot Error :
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
No Music:
➡ Use the unit again after reducing the
temperature inside the vehicle.
The connected USB device contains no playable audio
file.
Media was played that doesn’t have data recorded that
the unit can play.
Hold Error :
Activation of the protective circuit when the
temperature inside the disc changer is higher than 60
degrees Celsius stops the disc changer from operating.
At such times this message will appear.
USB Device Error!!:
The connected USB device is rated a current capacity
higher than the allowable limit.
➡ Use when the temperature at the site where the
disc changer has been fitted has dropped.
➡ Check the USB device.
Some trouble may have occurred to the connected
USB device.
➡ Change the source to any source other than USB.
Remove the USB device.
Mecha Error :
The disc player is malfunctioning.
➡ Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
Authorization Error:
Connection to the iPod has failed.
➡ Remove the iPod and then reconnect it.
The unit does not support the iPod.
➡ See <iPod that can be connected to this unit>
(page 7).
Disc Error :
An unplayable disc is inserted.
Read Error :
Disc is quite dirty.
Update your iPod:
➡ Clean the disc, referring tot he section on
<Handling discs> (page 6).
Disc is upside down.
The iPod's software is an older version which the unit
can not support.
➡ Confirm that the software for the iPod is the
latest version. See <iPod that can be connected
to this unit> (page 7).
➡ Load the disc with the labeled side up.
Region code Error :
The disc you wanted to play has a region code that
cannot be played with this unit.
Parental level Error:
The disc you wanted to play has a higher level than the
parental level you set.
English
91
Specifications
Monitor section
USB interface section
Picture Size
USB Standard
: 6.97 inches (diagonal) wide
154.08 mm (W) x 86.58 mm (H)
: USB 1.1/ 2.0
File Sytem
Display Sytem
: FAT 16/ 32
: Transparent TN LCD panel
Maximum Power Supply Current
Drive System
: 500 mA
: TFT active matrix system
D/A Converter
Number of Pixels
: 24 Bit
: 336,960 (480H x 234V x RGB)
Audio Decoder
Effective Pixels
: MP3/ WMA/ AAC
: 99.99 %
Video Decoder
Pixel Arrangement
: MPEG1/ MPEG2/ MPEG4 (DivX)
: RGB striped arrangement
Back Lighting
: Cold Cathode Fluorescent Tube
FM tuner section
Frequency Range (50 kHz)
: 87.5 MHz – 108.0 MHz
Usable Sensitivity (S/N : 26 dB)
DVD player section
D/A Converter
: 0.7 μV/ 75 Ω
: 24 bit
Quieting Sensitivity (S/N : 46 dB)
Audio Decoder
: 1.6 μV/ 75 Ω
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/ AAC
Frequency Response ( 3.0 dB)
Video Decoder
: 30 Hz – 15 kHz
: MPEG1/ MPEG2/ MPEG4 (DivX)
S/N Ratio (dB)
Wow & Flutter
: 65 dB (MONO)
: Below Measurable Limit
Selectivity ( 400 kHz)
Frequency Response
: ≥ 80 dB
Sampling frequency; 96 kHz : 20 – 44,000 Hz
Sampling frequency; 48 kHz : 20 – 22,000 Hz
Sampling frequency; 44.1 kHz : 20 – 20,000 Hz
Stereo Separation
: 35 dB (1 kHz)
Total Harmonic Distortion
: 0.010 % (1 kHz)
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
Dynamic Range
: 98 dB (DVD-Video 96 kHz)
Disc Format
LW tuner section
Frequency Range (9 kHz)
: 153 kHz – 281 kHz
Usable Sensitivity
: 45 μV
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
MW tuner section
Frequency Range (9 kHz)
Quantifying Bit Number
: 531 kHz – 1611 kHz
: 16/ 20/ 24 bit
Usable Sensitivity
: 25 μV
92
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Video section
General
Color System of External Video Input
Operating voltage
: NTSC/PAL
: 14.4 V (11 – 16 V allowable)
External Video Input Level (RCA jacks)
Maximum Current Consumption
: 1 Vp-p/ 75 Ω
: 15 A
External Audio Max Input Level (RCA jacks)
DImensions (W × H × D)
: 2 V/ 25 kΩ
: 182 × 53 × 160 mm
Video Output Level (RCA jacks)
Operational Temperature Range
: 1 Vp-p/ 75 Ω
: -10 °C – +60 °C
Audio Output Level (RCA jacks)
Storage Temperature Range
: 1.2 V/ 10 kΩ
: -20 °C – +85 °C
Analog RGB input
Weight
: 0.7 Vp-p/ 75 Ω
: 2.3 kg
Audio section
Maximum Power (Front & Rear)
: 50 W x 4
Full Bandwidth Power (Front & Rear)
(PWR DIN 45324, +B=14.4V)
: 30 W x 4
Preout Level (V)
: 2 V/ 10 kΩ
Preout Impedance
: ≤ 600 Ω
Speaker Impedance
: 4 – 8 Ω
Tone action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 10 kHz 8 dB
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
English
93
The marking of products using lasers (Except for some areas)
The label is attached to the chassis/case and says that the component
uses laser beams that have been classified as Class 1. It means that the
unit is utilizing laser beams that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU
countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment should be recycled at a facility capable of handling these
items and their waste byproducts. Contact your local authority for details in locating a recycle facility
nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
94
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
About DivX
DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video
with high visual quality that maintains a relatively small file size. DivX files can also include advanced media
features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download
online, and you can create your own using your personal content and easy-to-use tools from DivX.com.
About DivX Certified
DivX Certified products are officially tested by the creators of DivX and guaranteed to play all versions of DivX
video, including DivX 6. Certified products qualify for one of several DivX Profiles that designate the type of
video the product supports, from compact portable video to high-definition video.
The "AAC" logo is trademark of Dolby Laboratories.
Apple, the Apple logo, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS logos and Symbol
are trademarks of DTS, Inc. ©1996-2007 DTS, Inc. All Rights Reserved.
English
95
|
RCA EZ1010RD User Manual
RCA EZ200 User Manual
POSIFLEX Business Machines Cash Register Touch Terminal User Manual
Pioneer Premier DEH P590IB User Manual
Pioneer Car Stereo System 08118 65708 User Manual
Philips 150MT2 User Manual
Nikon 12x50CF User Manual
Magnadyne 7 Color LCD Monitor M135C 4 User Manual
Lincoln TOWN CAR User Manual
JVC KW XC400 User Manual