Kenwood Car Stereo System KDC 414UM User Manual

CD-RECEIVER  
KDC-4547U  
KDC-4047U  
KDC-4047UGY  
KDC-4047UM  
KDC-414U  
KDC-414UM  
INSTRUCTION MANUAL  
© B64-4526-00/00 (EW/E2W/M2W)  
Before Use  
condensation on the lens may not allow CDs to play.  
In such a situation, remove the disc and wait for the  
condensation to evaporate. If the unit still does not  
operate normally after a while, consult your Kenwood  
dealer.  
2WARNING  
To prevent injury or fire, take the following  
precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools) inside  
the unit.  
Notes  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• When you purchase optional accessories, check with  
your Kenwood dealer to make sure that they work  
with your model and in your area.  
Before using this unit for the first time  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel  
the Demonstration mode. Refer to <Exit of the  
Demonstration Mode> (page 4).  
• The characters which can be displayed by this unit  
are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |  
~ .  
• The RDS feature won’t work where the service is not  
supported by any broadcasting station.  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
How to reset your unit  
• If the unit fails to operate properly, press the Reset  
button. The unit returns to factory settings when the  
Reset button is pressed.  
1. Release the faceplate lock so that it can be  
removed. Refer to <Removing the Faceplate>  
(page 6)  
2. Press the Reset button and reattaching the  
faceplate.  
Handling CDs  
• Do not touch the recording surface of the CD.  
• Do not stick tape etc. on the CD, or use a CD with  
tape stuck on it.  
• Do not use disc type accessories.  
Reset button  
Cleaning the Unit  
• Clean from the center of the disc and move  
outward.  
• When removing CDs from this unit, pull them out  
horizontally.  
• If the CD center hole or outside rim has burrs,  
use the CD only after removing the burrs with a  
ballpoint pen etc.  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off with  
a cloth moistened with neutral cleaner, then wipe it  
again with a clean soft dry cloth.  
¤
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth or  
using a volatile liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
CDs that cannot be used  
• CDs that are not round cannot be used.  
• CDs with coloring on the recording surface or CDs  
that are dirty cannot be used.  
• This unit can only play the CDs with  
About the Terminals of the Unit and  
Faceplate  
.
This unit may not correctly play discs which do not  
have the mark.  
To prevent deterioration, do not touch the terminals of the  
unit and faceplate with your fingers.  
• You cannot play a CD-R or CD-RW that has not  
been finalized. (For the finalization process refer to  
your CD-R/CD-RW writing software, and your CD-R/  
CD-RW recorder instruction manual.)  
• 3 inch CD cannot be used. Attempt to insert using  
an adapter can cause malfunction.  
If the terminals on the unit or faceplate get dirty, wipe them  
with a clean soft dry cloth.  
Lens Fogging  
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
CD player of the unit. Called lens fogging, this  
English  
|
3
Basic Operations  
Release  
Disc slot  
USB Terminal  
[
]
[SRC]  
[DISP]  
[
]
Auxiliary input  
ꢀ D  
[1][2] [3][4] [5][6]  
[
] [BAND] [VOL]  
[
] [  
]
Before Using  
Common Operation  
Exit of the Demonstration Mode  
Power and source select  
Turn off the demonstration mode when you use it  
for the first time after installation.  
Turns the power ON by pressing the [SRC]  
button.  
When power is ON, pressing the [SRC] button  
switches among playable sources in the following  
order:  
Tuner (“TUNER”) USB (“USB”) or iPod (“iPod”)  
CD (“CD”) Auxiliary Input (“AUX”) Standby  
(“STANDBY”) Tuner (“TUNER”)  
Keeping pressing the [SRC] button for at least 1  
second turns the power OFF.  
1 Press the [VOL] knob to quit the demonstration  
mode when the messages “CANCEL DEMO,  
“PRESS, VOLUME KNOB” are displayed (approx.  
15 seconds).  
2 Select “YES” and press the [VOL] knob.  
When “NO” is selected, turn the [VOL] knob.  
Demonstration mode can also be cancelled in “DEMO  
MODE” of <Function Setting> (page 8).  
The source “iPod” and “CD” can be selected when each  
source is ready to play.  
Adjusting the Clock  
1 Press the [DISP] button several times until clock  
Volume  
Turning the [VOL] knob adjusts the sound  
display (“CLOCK”) appears.  
2 Keep pressing the [DISP] button until the hour  
volume.  
display blinks.  
3 Turn the [VOL] knob to adjust the hour.  
Clock display and Display scroll  
Pressing the [DISP] button selects the display  
mode.  
4 Press the [VOL] knob to finish the hour adjusting.  
The minute display blinks.  
Refer to <Text Display Selection> (page 7).  
Keeping pressing the [DISP] button scrolls the  
display.  
5 Turn the [VOL] knob to adjust the minute.  
6 Press the [VOL] knob to finish the minute  
adjusting.  
Auxiliary input  
Portable audio device can be connected with the  
stereo mini-plug (3.5 mm ø).  
You can do this adjustment when “TIME SYNC” in <Function  
Setting> (page 8) is set to “OFF.  
|
4
KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Playing Music (CD/USB/iPod)  
Listening Radio  
Playing Disc  
Select Tuner source  
Insert a disc into the disc slot.  
When inserted, the source is switched  
automatically and a song starts playing.  
Pressing the [SRC] button several times switches  
the source to “TUNER.  
Band select  
Playing USB device  
Connect a USB device or iPod to the USB  
terminal.  
Pressing the [BAND] button switches the  
receiving band (FM1, FM2, FM3, AM).  
When connected, the source is switched  
automatically and a song is starts playing.  
Station select  
Pressing the [4] or [¢] button selects the  
station.  
Folder select  
Pressing the [BAND] button switches a folder.  
The iPod can be operated only when a category  
has been selected in the search mode.  
Station memory  
Pressing the [1] – [6] button recalls the  
memorized station.  
Keeping pressing the [1] – [6] button for at  
least 2 seconds memorizes the station currently  
selected.  
Song select  
Pressing the [4] or [¢] button selects a song  
(track or file).  
Fast reverses or forwards the music while  
pressing the [4] or [¢] button.  
(No sound is output while playing audio file.)  
Traffic information  
Press the [ ] button for at least 1 second.  
Turns ON or OFF the Traffic Information function.  
When the function is turned ON, “TI” indicator is  
ON.  
Pause and play  
Pressing the [6] button pauses or resumes  
playing a song (track or file).  
If traffic bulletin starts when the function is ON,  
“TRAFFIC”/“TRAFFIC INFO” is displayed and traffic  
information is received.  
Removing Disc and USB device  
Pressing the [0] button ejects a disc.  
Keeping pressing for at least 2 seconds can  
be entered to the USB Remove mode (“USB  
REMOVE” is displayed.) and the USB device can  
be removed safely.  
Details of the station selecting in operation are set in the  
“SEEK MODE” of <Function Setting> (page 8).  
Receivable stations can be automatically memorized. See  
“AUTO MEMORY” of <Function Setting> (page 8).  
Up to 6 each stations can be memorized to the [1] – [6]  
button in each band (FM1, FM2, FM3, AM).  
Up to 6 stations with a different band (FM/AM) can be  
memorized to the [1] – [6] button according to the setting  
of “PRESET TYPE” of <Function Setting> (page 8).  
If the volume is adjusted during reception of traffic  
information, the adjusted volume is memorized  
automatically. The memorized volume will be applied next  
time the Traffic Information function is turned ON.  
CA-U1EX (optional accessory) is required to connect a USB  
device.  
CA-U1EX  
KCA-iP101 (optional accessory) is required to connect an  
iPod.  
For the playable audio files, devices, iPod, see <About Audio  
file> (page 16).  
English  
|
5
General  
Removing the Faceplate  
Muting Volume upon Reception of  
Phone Call  
The faceplate of the unit can be detached and taken  
with you, helping to deter theft.  
The audio system automatically mutes when a call  
comes in.  
Detach the faceplate  
Press the Release button.  
When a call comes in  
“CALLis displayed.  
The audio system pauses.  
Reattaching the Faceplate  
Refer to the following diagram when  
reattaching the faceplate.  
Listening to the audio during a call  
Press the [SRC] button.  
The “CALLdisplay disappears and the audio system  
comes back ON.  
When the call ends  
Hang up the phone.  
The “CALLdisplay disappears and the audio system  
comes back ON.  
¤
After pressing the Release button, detach the faceplate  
immediately. If the faceplate is left attached, it can fall  
due to vibration and so on.  
To use the TEL Mute feature, you need to hook up the MUTE  
wire to your telephone using a commercial telephone  
accessory. Refer to <Connecting Wires to Terminals> (page  
19).  
The faceplate is a precision piece of equipment and can  
be damaged by shocks or jolts.  
Keep the faceplate in its faceplate case while detached.  
Do not place the faceplate (and the faceplate case)  
in areas exposed to direct sunlight, excessive heat or  
humidity. Also avoid places with too much dust or the  
possibility of water splashing.  
|
6
KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Display Indicator  
Text Display Selection  
Changing displayed information on each source  
following;  
KDC-4047U/ KDC-4047UGY/ KDC-4047UM/  
KDC-414U/ KDC-414UM  
w qx  
In Tuner source  
Information  
Display  
Program Service name (FM)  
“FREQ/PS”/  
“FREQUENCY/PS”  
“RADIO TEXT”  
“FREQUENCY”  
“CLOCK”  
s
r
Radio text (FM)  
Frequency (MW, LW)  
Clock  
KDC-4547U  
In CD source  
Information  
Disc title  
Track title  
Play time & Track number  
Clock  
Display  
“DISC TITLE”  
“TRACK TITLE”  
“P-TIME”  
p
q
r
w
s
t
u
v
1 “ATT“ indicator: Blinks when the attenuator  
function is on. Use the remote control (optional  
accessory) to turn on/off the attenuator function.  
“CLOCK”  
In Audio file/ iPod source  
Information  
Music title & Artist name  
2 “ST“ indicator: Lights when a stereo broadcast is  
received.  
Display  
“TITLE”/  
“TITLE/ARTIST”  
“ALBUM”/  
3 “RDS“ indicator: Lights when the RDS service is  
available.  
Album name & Artist name  
“ALBUM/ARTIST”  
“FOLDER NAME”  
“FILE NAME”  
“P-TIME”  
4 “TI“ indicator: Lights when the Traffic Information  
function is on.  
Folder name  
File name  
Play time & Music number  
Clock  
5 “EQ“ indicator: Lights when System Q (page 10) is  
set to an EQ mode other than “NATURAL”.  
“CLOCK”  
6 “B.BOOST“ indicator: Lights when Bass Boost  
(page 10) is set to “1” or “2.  
In Standby/ Auxiliary input source  
Information  
Source name  
Clock  
Display  
“SOURCE NAME”  
“CLOCK”  
7 “ “ indicator: Lights in the Search mode or when  
a Playlist is displayed.  
8 “IN“ indicator: Lights when a disc is in the unit.  
Select the text  
Press the [DISP] button.  
9 “ “ indicator: Shows the image indicating the  
operating state of each source or the setting of  
Audio Control.  
When you select the clock display, the display setting of  
each source will be changed to the clock display.  
If the selected display item does not have any  
information, alternative information is displayed.  
When selecting “FOLDER NAME” while playing with  
iPod, names will be displayed depending on currently  
selected browsing items.  
If the iPod Control by Hand Mode is set to on while  
playing the iPod, “iPodMODE” is displayed.  
If all characters cannot be displayed while playing with  
iPod, the file number in the list is displayed.  
Information  
Music title  
Folder name  
File name  
Display  
“TITLE***”  
“FOLDER***”  
“FILE***”  
English  
|
7
Function Setting  
Perform configuration for this unit. You can set up  
the following functions.  
You can do this adjustment when “TIME SYNC” is set to  
“OFF.  
ø Synchronize the clock: “TIME SYNC” ➤  
“ON”*,”OFF”  
Synchronizing the RDS station time data and this  
unit’s clock.  
π Dimmer: “DIMMER SET” “ON”,”OFF”*  
Adjusts the brightness of the display according to  
the surrounding illumination.  
1 Select a source  
Press the [SRC] button.  
Items to be displayed vary depending on the selected  
source. Refer to the function list shown later.  
2 Enter Function Setting mode  
Press the [VOL] button.  
“FUNCTION” is displayed.  
[ Text Scroll: “TEXT SCROLL“AUTO”,  
”MANUAL*  
3 Select the Function item  
Scrolls the text display of CD, audio file and Radio  
text.  
Turn the [VOL] knob to display your desired  
item, and then press the [VOL] knob.  
Repeat the above operation to select the  
function item to set.  
Selecting AUTO scrolls them automatically.  
Local Seek: “LOCAL SEEK” “ON”,”OFF”*  
Only stations whose reception is good are  
searched in auto seek tuning. (FM only)  
] Seek Mode: “SEEK MODE” ➤  
“AUTO1”*,”AUTO2”,”MANUAL”  
Pressing the [  
to the previous item.  
] button allows you to go back  
4 Set the Function item  
Selects the tuning mode of the radio.  
Turn the [VOL] knob to select your desired  
setting, and then press the [VOL] knob.  
Tuning mode  
Display Operation  
Auto seek  
“AUTO1” Automatic search for a station.  
5 Exit Function Setting mode  
Preset station seek “AUTO2” Search in order of the stations in  
the Preset memory.  
Press the [  
] button for at least 1 second.  
Manual  
“MANUALNormal manual tuning control.  
Auto Memory: “AUTO MEMORY”  
Memorizes six stations with good reception  
automatically.  
Function item  
Legend :  
No. Function name: “Function name displayed on  
this unit” Setting 1”*, “Setting 2”...  
The function related to the selected function item is  
described. For where it appears, refer to the No. given in  
the function list.  
Selecting “YES” and then pressing the [VOL] knob  
starts the auto memory operation.  
This setting can be made when “TYPE NORM”/“TYPE  
NORMALis selected for the <Mixed Preset Memory  
Switching> item.  
\ Monaural Reception: “MONO SET” ➤  
“ON”,”OFF”*  
The setting marked with * is a factory setting.  
The function marked with *1 is supported only by the  
You can reduce the noise when stereo broadcasts  
are received as monaural. (FM only)  
KDC-4547U.  
The function marked with *2 is supported only by the  
KDC-4547U/ KDC-4047U/ KDC-4047UM/ KDC-414U/  
KDC-414UM.  
« News: “NEWS SET” “OFF”*,”0”-”90”  
Automatically receives news bulletin when it  
starts. Set the time during which interrupt is to be  
disabled after start of another news bulletin.  
Changing “NEWS 00M” to “NEWS 90M” turns this  
function ON.  
<SETTINGS>  
¥ Clock Adjust: “CLOCK ADJ”/“CLOCK ADJUST”  
Sets the clock  
1. Turn the [VOL] knob to adjust the hour.  
2. Press the [VOL] knob to finish the hour  
adjusting. The minute display blinks.  
3. Turn the [VOL] knob to adjust the minute.  
4. Press the [VOL] knob to finish the minute  
adjusting.  
If news bulletin starts when this function is ON,  
“NEWS” is displayed and news is received. If  
“20M” is has been set, reception of another news  
bulletin will not start for 20 minutes.  
The news bulletin volume is the same level that  
was set for Traffic Information.  
|
8
KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Setting the timer to turn this unit’s power OFF  
automatically when Standby mode continues.  
Using this setting can save the vehicle’s battery  
power.  
Å Alternative Frequency: “AF SET” “ON”*,”OFF”  
When the reception is poor, automatically  
alternate to another frequency broadcasting the  
same program in the same RDS network with  
better reception.  
Í RDS Regional: “RDS REG”/“RDS REGIONAL➤  
“ON”*,”OFF”  
Sets whether to switch to the station only in the  
specific region using the “AF” control.  
Î Auto TP Seek: “ATP SEEK”/“AUTO TP SEEK” ➤  
“ON”*,”OFF”  
– – – –: Power OFF Timer function is OFF.  
20M: Turns the power OFF after 20 minutes.  
40M: Turns the power OFF after 40 minutes.  
60M: Turns the power OFF after 60 minutes.  
" Built in AUX: “BUILTIN AUX”/“BUILT-IN AUX” ➤  
“ON1”*,”ON2”,”OFF”  
When this is set to ON, AUX source can be  
selected.  
ON1: Outputs the sound of external unit  
connected to the AUX terminal when  
switched to AUX source.  
ON2: Activates the attenuator function when  
turning on the power with AUX source  
selected.  
When traffic information station reception is poor,  
automatically searches for a station that can be  
received better.  
Ï Skip Search*1: “SKIP SEARCH” ➤  
“0.5%”*,“1%”,“5%”,“10%”  
Sets the ratio of skip performed with <Music  
Search for iPod> (p.13) and <Music Search> (p.12).  
Ì My Playlist Delete*1: “MPLIST DEL”/“MPLIST  
DELETE”  
Turn off the attenuator function when  
listening to output from external unit. This  
prevents the noise when no external unit is  
connected to AUX terminal.  
Deletes the saved My Playlist.  
Selecting ”YES” and then pressing the [VOL] knob  
deletes the My Playlist.  
OFF: Disables the selection of AUX source.  
Set to OFF when not using the AUX terminal.  
Æ CD READ: “CD READ” “1”*,”2”  
Sets the method for reading CD.  
Ó Name Set: “AUX NAME”/“AUX NAME SET” ➤  
“AUX”*, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, “TV”  
Sets the display when switched to AUX source.  
When unable to play special format CD, set this  
function to “2” to force playing. Note that some  
music CD may be unplayable even when set to  
“2”.  
In addition, audio files cannot be played when set  
to “2”. Normally, keep this set to “1”.  
1 : Automatically distinguishes between audio file  
disc and music CD when playing disc.  
2 : Forces playing as music CD.  
<INITIAL SET>  
Ô Mixed Preset Memory Switching: “PRESET  
TYPE” “TYPE NORM”/“TYPE NORMAL*,“TYPE  
MIX”  
“TYPE NORM”/“TYPE NORMAL”:  
1 station can be assigned to 1 preset button in  
each of 4 bands (FM1, FM2, FM3, and AM), i.e.,  
a total of 24 stations (6 stations x 4 bands) can  
be preset.  
å Switching Preout*2: “SWITCH PRE”/“SWITCH  
PREOUT” “REAR”*,”SUB-W”  
Switches the preout between rear output (“REAR”)  
and subwoofer output (“SUB-W”).  
ß Speaker Select: “SP SELECT” ➤  
“OFF”*,”5/4”,”6*9/6”,”OEM”  
“TYPE MIX”:  
A total of 6 stations can be assigned to a total  
of 6 preset buttons regardless of band (FM1,  
FM2, FM3, and AM). You can recall a preset  
station without switching between bands.  
Beep: “KEY BEEP” “ON”*,“OFF”  
Setting the operation check sound (beep sound)  
ON/OFF.  
Fine-tuning so that the System Q value is optimal  
when setting the speaker type as follows;  
Speaker type  
OFF  
For 5 & 4 in. speaker  
For 6 & 6x9 in. speaker  
For the OEM speaker  
Display  
“SP OFF”  
“SP 5/4”  
“SP 6*9/6”  
“SP OEM”  
Ò Russian language setting: “RUSSIAN SET” ➤  
“ON”,“OFF”*  
When this is set to ON, the following character  
strings are displayed in Russian:  
Folder name/ File name/ Song title/ Artist name/  
Album name  
Firmware Upgrade: “F/W UP xx.xx” “MEDIA  
USB”*, ”MEDIA CD”  
Ú Power OFF Timer: “P-OFF WAIT” ➤  
“----”,“20M”*,“40M”,“60M”  
Next page 3  
English  
|
9
Function Setting  
Upgrades the firmware.  
Selecting "YES" and then pressing [VOL] knob  
starts upgrading the firmware.  
Ù Supreme: “SUPREME” “ON”*, ”OFF”  
Technology to extrapolate and supplement with  
proprietary algorithm, the high-frequency range  
that is cut off when encoding at low bit rate (less  
than 128Kbps, Sampling frequency is 44.1kHz).  
Supplementing is optimized by compression  
format (AAC, MP3 or WMA) and processed  
according to bit rate.  
For how to update the firmware, access our web site.  
<DEMO MODE>  
ƒ Demo Mode: “DEMO MODE” “ON”*, ”OFF”  
The effect is negligible with music that is encoded  
at high bit rate, variable bit rate or has minimal  
high frequency range.  
Specifies whether to enable demonstration.  
Can be set while Audio file source of CD/USB  
(excluding iPod).  
C Volume offset: “VOL OFFSET”/“VOLUME  
OFFSET” “- 8” – ” 0” (When in AUX source: ”-8”  
– ”+8”)  
<AUDIO CONTROL>  
© Subwoofer output*2: “SUB-W SET”/  
“SUBWOOFER SET” “ON”*, ”OFF”  
Sets each source’s volume as a difference from  
the basic volume.  
This setting can be made when “SUB-W” is selected for  
the <Switching Preout> item.  
˙ Bass Boost: “BASS BOOST” “LV1”*, ”LV2”, ”OFF”  
Δ System Q: “SYSTEM Q” “NATURAL*, ”ROCK”,  
”POPS”, ”EASY”, ”TOP 40”, ”JAZZ”, ”GAME”, ”USER”  
Switches between the following preset equalizer  
curves;  
<Function List>  
Function items appearing during standby  
“SETTINGS”  
“CLOCK”  
“CLOCK ADJ”/  
“CLOCK ADJUST” ¥  
“TIME SYNC” ø  
“DIMMER SET” π  
“TEXT SCROLL[  
Natural, Rock, Pops, Easy, Top 40, Jazz, Game, User  
setting  
“DISPLAY  
“USER”: This appears when Bass level, Middle level, and  
Treble level are adjusted. When the System Q setting is  
changed, the Bass, Middle, and Treble set replace the  
System Q values.  
“INITIAL SET”  
“PRESET TYPE” Ô  
“KEY BEEP”   
“RUSSIAN SET” Ò  
“P-OFF WAIT” Ú  
“BUILTIN AUX”/“BUILT-IN AUX” "  
“CD READ” Æ  
“SWITCH PRE”/“SWITCH PREOUT” å  
“SP SELECT” ß  
˚ Bass level adjust: “BASS LEVEL“-8” – ”+ 8”  
¬ Middle level adjust: “MID LEVEL“-8” – ”+ 8”  
Treble level adjust: “TRE LEVEL“-8” – ”+ 8”  
˚ - : Source tone memory: Puts the set up value in  
“F/W UP” ∂  
the memory per source.  
“DEMO MODE” ƒ  
' Balance: “BALANCE” “L 15” - ”R 15”  
æ Fader: “FADER” “R 15” – ”F 15”  
Z Subwoofer level adjust: “SUB-W LEVEL“-  
15” – ”+ 15”  
Function items appearing when the tuner  
source is selected  
“AUDIO  
Û Subwoofer Low Pass Filter: “LPF SUB-W”/  
“LPF SUBWOOFER” “85”, ”120”, ”160”,  
”THROUGH”(OFF)*  
X Subwoofer Phase: “PHASE” “REV/  
“REVERSE”(180°), ”NORM”/ ”NORMAL”(0°)*  
“SUB-W SET”/“SUBWOOFER SET” ©  
CONTROL/  
“AUDIO  
CTRL”  
“BASS BOOST” ˙  
“SYSTEM Q” Δ  
“BASS LEVEL˚  
“MID LEVEL¬  
“TRE LEVEL…  
“BALANCE” '  
“FADER” æ  
Z - X : These adjustments can be made when “ON” is  
selected for the <Subwoofer output> item.  
“SUB-W LEVELZ  
“DETAIL SET”/  
“LPF SUB-W”/  
X : This adjustment can be made when a setting other  
than “THROUGH” is selected for the <Subwoofer Low  
Pass Filter> item.  
“DETAILED SET”  
“LPF SUBWOOFER” Û  
“SUB-W PHASE” X  
|
10 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
“VOL OFFSET”/  
“VOLUME OFFSET” C  
“MID LEVEL¬  
“TRE LEVEL…  
“BALANCE” '  
“FADER” æ  
“SETTINGS”  
“LOCAL SEEK” “  
“SEEK MODE” ]  
“AUTO MEMORY” ‘  
“MONO SET” \  
“NEWS SET” «  
“AF SET” Å  
“SUB-W LEVELZ  
“DETAIL SET”/  
“LPF SUB-W”/  
“DETAILED SET”  
“LPF SUBWOOFER” Û  
“SUB-W PHASE” X  
“VOL OFFSET”/  
“RDS REG”/“RDS REGIONALÍ  
“VOLUME OFFSET” C  
“ATP SEEK”/“AUTO TP SEEK” Î  
“CLOCK”  
“CLOCK ADJ”/  
“CLOCK ADJUST” ¥  
“TIME SYNC” ø  
“DIMMER SET” π  
“TEXT SCROLL[  
“SETTINGS”  
“SKIP SEARCH” Ï  
“MPLIST DEL/“MPLIST DELETE” Ì  
“CLOCK”  
“CLOCK ADJ”/  
“CLOCK ADJUST” ¥  
“TIME SYNC” ø  
“DIMMER SET” π  
“TEXT SCROLL[  
“NEWS SET” «  
“DISPLAY”  
“DEMO MODE” ƒ  
“DISPLAY”  
“RDS SET”  
Function items appearing when the CD & audio  
file source is selected  
“AF SET” Å  
“RDS REG”/  
“RDS REGIONALÍ  
“ATP SEEK”/  
“AUDIO  
CONTROL/  
“AUDIO  
CTRL”  
“SUB-W SET”/“SUBWOOFER SET” ©  
“BASS BOOST” ˙  
“SYSTEM Q” Δ  
“BASS LEVEL˚  
“MID LEVEL¬  
“AUTO TP SEEK” Î  
“DEMO MODE” ƒ  
“TRE LEVEL…  
“BALANCE” '  
“FADER” æ  
Function items appearing when an AUX source  
is selected  
“AUDIO  
CONTROL/  
“AUDIO  
CTRL”  
“SUB-W SET”/“SUBWOOFER SET” ©  
“BASS BOOST” ˙  
“SYSTEM Q” Δ  
“BASS LEVEL˚  
“MID LEVEL¬  
“SUB-W LEVELZ  
“DETAIL SET”/  
“DETAILED SET”  
“LPF SUB-W”/  
“LPF SUBWOOFER” Û  
“SUB-W PHASE” X  
“SUPREME SET” Ù  
“VOL OFFSET”/  
“TRE LEVEL…  
“VOLUME OFFSET” C  
“BALANCE” '  
“SETTINGS”  
“SKIP SEARCH” (USB source only) Ï  
“FADER” æ  
“CLOCK”  
“CLOCK ADJ”/  
“CLOCK ADJUST” ¥  
“SUB-W LEVELZ  
“DETAIL SET”/  
“LPF SUB-W”/  
“LPF SUBWOOFER” Û  
“SUB-W PHASE” X  
“VOL OFFSET”/  
“VOLUME OFFSET” C  
“TIME SYNC” ø  
“DIMMER SET” π  
“TEXT SCROLL[  
“NEWS SET” «  
“DETAILED SET”  
“DISPLAY”  
“RDS SET”  
“SETTINGS”  
“AUX NAME”/“AUX NAME SET” Ó  
“AF SET” Å  
“CLOCK”  
“CLOCK ADJ”/  
“CLOCK ADJUST” ¥  
“RDS REG”/  
“RDS REGIONALÍ  
“TIME SYNC” ø  
“DIMMER SET” π  
“TEXT SCROLL[  
“NEWS SET” «  
“ATP SEEK”/  
“AUTO TP SEEK” Î  
“DISPLAY”  
“RDS SET”  
“DEMO MODE” ƒ  
“AF SET” Å  
“RDS REG”/  
“RDS REGIONALÍ  
“ATP SEEK”/  
“AUTO TP SEEK” Î  
Function items appearing when the iPod source  
is selected  
“AUDIO  
CONTROL/  
“AUDIO  
CTRL”  
“SUB-W SET”/“SUBWOOFER SET” ©  
“BASS BOOST” ˙  
“SYSTEM Q” Δ  
“DEMO MODE” ƒ  
“BASS LEVEL˚  
English  
|
11  
Music Disc/Audio File Operation  
Function of Audio file/ CD source  
Play function  
Music Search  
Repeat play  
Press the [4] button.  
Selecting the music you want to listen to from the  
device or media being played now.  
Switches between Track Repeat (“TRAC REPEAT”/  
“TRACK REPEAT”) and OFF (“REPEAT OFF”) when  
pressed while playing a CD.  
Switches between File Repeat (“FILE REPEAT”),  
Folder Repeat (“FOLD REPEAT”/ “FOLDER REPEAT”),  
and OFF (“REPEAT OFF”) when pressed while  
playing an audio file.  
1 Enter Music Search mode  
Press the [ ] button.  
“SEARCH” is displayed.  
Displays the current Audio file name.  
2 Search for music  
Audio file  
Random play  
Press the [3] button.  
Operation type  
Movement between  
folders/files  
Skip Search*  
Selection of folder/flie Press the [VOL] knob.  
Return to previous folder Press the [ ] button.  
Operation  
Turn the [VOL] knob.  
Randomly plays the music in the disc or folder.  
When Random Play is turned on, “DISC RANDOM”/  
“FOLD RANDOM”/ “FOLDER RANDOM” is displayed.  
Pressing this button again cancels the Random  
play.  
Press the [4] or [¢] button.  
Return to root folder  
Press the [BAND] button.  
Scan play  
“<” or “>” beside the displayed folder name  
indicates that this folder is preceded or followed by  
another folder.  
Press the [2] button.  
Successively plays the intro of the music in the disc  
or folder.  
When Scan Play is turned on, “TRAC SCAN”/ “TRACK  
SCAN”/ “FILE SCAN” is displayed.  
Pressing this button again plays songs in the  
normal mode starting with the song being played  
now.  
CD source  
Operation type  
Movement between track Turn the [VOL] knob.  
Selection of track  
Return to first track  
Operation  
Press the [VOL] knob.  
Press the [BAND] button before selecting  
a track.  
Cancelling the Music Search mode  
Function of KDC-4547U with iPod  
Press the [  
] button for at least 1 second.  
All Random  
All songs in iPod are played at random.  
Skip Search: The number of songs to be skipped is  
determined by the ratio of the total number of songs in  
the list which is selected. Set the ratio with “SKIP SEARCH”  
Press the [3] button for at least 1 seconds.  
Pressing the button toggles the setting between  
All random play on (“ALL RANDOM”) and off  
(“RANDOM OFF”).  
in <Function Setting> (page 8). Keep pushing the [  
or [ ] button for 3 seconds or longer skips songs at  
10% regardless of the setting.  
4]  
¢
* This operation is effective only for the files registered in  
the database created with KENWOOD Music Editor.  
The time required to turn on the all random function  
may become longer depending on the number of songs  
in iPod.  
Turning on the all random function changes the iPod  
browse item to “songs. This browse item will not change  
even if the all random function is turned off.  
If the browse item is changed to search for music while  
the all random function is on, the all random function is  
turned off and the songs in the browse item are played  
at random.  
|
12 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Function of KDC-4547U with iPod  
Function of KDC-4547U with iPod  
Music Search for iPod  
Alphabet Search  
Searches for the song (in iPod) you want to play.  
You can select a song by alphabet. This function  
searches songs whose name contain the specified  
character(s) in the list of the selected browse item  
(artist, album, etc).  
1 Enter Music Search mode  
Press the [ ] button.  
“SEARCH” is displayed.  
1 Enter Music Search mode  
Press the [ ] button.  
“SEARCH” is displayed.  
2 Search for music  
Operation type  
Movement between items Turn the [VOL] knob.  
Skip Search  
Selection of item  
Return to previous item Press the [ ] button.  
Operation  
2 Enter Alphabet Search mode  
Press the [ ] button.  
“SEARCH <_ _ _>” is displayed.  
Press the [  
4] or [¢] button.  
Press the [VOL] knob.  
Return to Top menu  
Search by Alphabet  
Press the [BAND] knob.  
Press the [ ] button. Refer to the next  
section <Alphabet Search>.  
3 Select the character to be searched for  
Operation type  
Operation  
Select the characters  
Turn the [VOL] knob.  
Move the cursor to the enter Press the [  
character position  
4] or [¢] button.  
Cancelling the Music Search mode  
Press the [  
] button for at least 1 second.  
You can enter up to 3 characters.  
4 Determine the selected character  
Skip Search: The number of songs to be skipped is  
determined by the ratio of the total number of songs in  
the list which is selected. Set the ratio with “SKIP SEARCH”  
Press the [VOL] knob.  
Start search. When search is completed, the music  
search mode is selected again at the selected  
character position.  
in <Function Setting> (page 8). Keep pushing the [  
4]  
or [ ] button for 3 seconds or longer skips songs at  
¢
10% regardless of the setting.  
Cancelling the Alphabet Search mode  
If no characters included in a song name can be  
displayed, the browse item name and digits are  
displayed.  
Press the [  
] button for at least 1 second.  
Items  
Playlists  
Artists  
Albums  
Songs  
Display  
“PLIST***” Podcasts  
“ART***”  
“ALB***”  
“PRGM***”  
Items  
Display  
The time of Alphabet search may become long  
“PDCT***”  
“GEN***”  
“COM***”  
depending on the number of songs or number of  
playlists in iPod.  
Genres  
Composers  
To search for a character other than A to Z and 0 to 9,  
enter “*” at the first character position. In this case, you  
cannot enter any character at the second and third  
character positions.  
If the first character string begins with an article “a, an,  
or “the” in the alphabet search mode, it is searched for in  
defiance of the article.  
English  
|
13  
Music Disc/Audio File Operation  
Function of KDC-4547U with iPod  
2 Turn the [VOL] knob to select ”ONE” or “ALL”,  
and then press the [VOL] knob.  
Selecting “DELETE ALLallows you to delete all  
songs.  
My Playlist for iPod  
Allows you to register your favorite songs in the  
Playlist of this unit. You can register up to 10 songs  
in the Playlist.  
3 Turn the [VOL] knob to select ”YES, and then  
press the [VOL] knob.  
“COMPLETED” is displayed.  
Registering Songs in the Playlist  
1 Play the song you want to register  
Press the [BAND], [4], and [¢] button.  
You can select the song to play by referring to  
<Music Search for iPod>.  
You can also delete all songs from the Playlist by  
selecting ”MPLIST DEL/ “MPLIST DELETE” described in the  
section <Function Setting> (page 8).  
2 Register the song  
Press the [5] button for at least 2 seconds.  
“## STORED (Registration number)” is displayed.  
You can register up to 10 songs.  
Function of KDC-4547U with iPod  
iPod Control by Hand Mode  
Make a Playlist from the songs stored in one iPod. If you  
attempt to register a song stored in a different iPod, ”NO  
INFO” appears and then ”MPLIST DELETE” appears. To  
delete the Playlist, turn the [VOL] knob to select “YES”  
and then press the [VOL] knob.  
Allows you to operate iPod with the control on the  
iPod.  
Press the [1] button.  
Pressing the button toggles the setting between  
iPod control by hand mode on (“HANDS ON”) and  
off (“HANDS OFF”).  
The song displayed in the Music Search mode can be  
registered in the same manner. For how to use the music  
search function, refer to <Music Search for iPod> (page  
13).  
In the iPod Control by hand mode, iPod cannot be  
operated using this unit.  
If you attempt to register the eleventh song, ”MEMORY  
FULLappears and you cannot register it accordingly. To  
register the song, delete an unnecessary song.  
Do not register Podcasts. Songs you do not want to  
register may be registered, or playback may not be  
carried out correctly.  
This mode is not compatible with music information  
display. The display will show “iPod MODE.  
iPod can be operated when it conforms to the iPod  
control function.  
Playing the Song in the Playlist  
1 Display the Playlist  
Press the [5] button.  
“MY PLAYLIST” is displayed.  
2 Play the song in the Playlist  
Turn the [VOL] knob to select the song you  
want to play, and then press the [VOL] knob.  
Turning the power OFF stops playing the song in the  
Playlist.  
The ending of a song without one second or longer  
silent may not be played.  
Random play cannot be performed during playback of a  
song in the Playlist.  
Deleting a Song from the Playlist  
1 Turn the [VOL] knob to display the song you  
want to delete, and then press the [VOL] knob  
for at least 2 seconds.  
|
14 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Tuner Operation  
PTY (Program Type)  
Program Type Preset  
Selecting the Program Type below and searching  
for a station;  
Putting the Program Type in the Preset button  
memory and quick recall.  
Program Type Display  
Program Type Display  
Serious Classical “CLASSICS”  
Presetting the Program Type  
Speech  
Music  
News  
“SPEECH”  
“MUSIC”  
“NEWS”  
1 Select the Program Type to preset  
Other Music  
Weather  
Finance  
“OTHER M”  
“WEATHER”  
“FINANCE”  
Refer to <PTY (Program Type)> (page 15).  
Current Affairs  
Information  
Sport  
“AFFAIRS”  
“INFO”  
“SPORT”  
2 Preset the Program Type  
Press the desired [1] — [6] button for at least 2  
seconds.  
Children’s programs “CHILDREN”  
Social Affairs  
Religion  
Phone In  
“SOCIAL”  
Education  
Drama  
Culture  
Science  
Varied  
Pop Music  
Rock Music  
Easy Listening  
Music  
“EDUCATE”  
“DRAMA”  
“CULTURE”  
“SCIENCE”  
“VARIED”  
“POP M”  
“ROCK M”  
“EASY M”  
“RELIGION”  
“PHONE IN”  
“TRAVEL”  
Recalling the preset Program Type  
Travel  
1 Enter PTY mode  
Leisure  
“LEISURE”  
“JAZZ”  
“COUNTRY”  
“NATION M”  
“OLDIES”  
Refer to <PTY (Program Type)> (page 15).  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Documentary  
2 Recall the Program Type  
Press the desired [1] — [6] button.  
“FOLK M”  
“DOCUMENT”  
Light Classical  
“LIGHT M”  
Changing Language for PTY Function  
Speech and Music include the Program type shown  
below.  
Selecting the Program Type display language as  
follows;  
Music: Black character item.  
Speech: White character item.  
Language  
English  
French  
Display  
1 Enter PTY mode  
“ENGLISH”  
“FRENCH”  
“GERMAN”  
Press the [ ] button.  
During PTY mode the “ ” indicator is ON.  
(KDC-4547U only)  
German  
1 Enter PTY mode  
2 Select the Program Type  
Refer to <PTY (Program Type)> (page 15).  
Turn the [VOL] knob.  
2 Enter Changing Language mode  
3 Search for the selected Program Type station  
Press the [ ] button.  
Press the [4] or [¢] button.  
3 Select the language  
4 Exit PTY mode  
Turn the [VOL] knob.  
Press the [  
] button.  
4 Exit Changing Language mode  
Press the [VOL] button.  
This function cannot be used during a traffic bulletin or  
AM reception.  
When the selected Program Type is not found, “NO PTY”  
is displayed. Select another Program Type.  
English  
|
15  
Appendix  
About Audio file  
iPod/iPhone that can be connected to this  
unit  
Playable Audio file  
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)  
Playable disc media  
CD-R/RW/ROM  
Playable disc file format  
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.  
Playable USB device  
USB mass storage class  
Playable USB device file system  
FAT16, FAT32  
Made for  
• iPod nano (1st generation) • iPod nano (2nd generation)  
• iPod nano (3rd generation) • iPod nano (4th generation)  
• iPod with video  
• iPod classic  
• iPod touch (1st generation) • iPod touch (2nd generation)  
Works with  
• iPhone  
• iPhone 3G  
• iPhone 3GS  
iPod Playable Model  
KDC-4547U  
Although the audio files are complied with the  
standards listed above, the play maybe impossible  
depending on the types or conditions of media or  
device.  
• Update iPod/iPhone software to the latest version.  
• The word “iPod” appearing in this manual indicates  
the iPod or the iPhone connected with the iPod  
connection cable* (optional accessory).  
* Not supported model KCA-iP500.  
Refer to the web site for connectable iPod and iPod  
connection cable.  
Playing order of the Audio file  
In the example of folder/file tree shown below, the  
files are played in the order from to .  
<
v
:
:
Folder
Audiofile  
CD  
()  
vꢀ  
vꢆ  
vꢇ  
• If you start playback after connecting the iPod, the  
music that has been played by the iPod is played  
first.  
vꢄ  
In this case, “RESUMING” is displayed without  
displaying a folder name, etc. Changing the browse  
item will display a correct title, etc.  
vꢉ  
v.  
• You cannot operate iPod if “KENWOOD” or “”  
displayed on iPod.  
An online manual about audio files is put on the site,  
manual, detailed information and notes which are not  
written in this manual are provided. Make sure to read  
through the online manual as well.  
|
16 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
This Product is not installed by the manufacturer of a  
vehicle on the production line, nor by the professional  
importer of a vehicle into an EU Member State.  
About USB device  
• In this manual, the word “USB device” is used for  
flash memories and digital audio players which have  
USB terminals.  
• When the USB device is connected to this unit,  
it can be charged up provided that this unit is  
powered.  
• Install the USB device in the place where it will not  
prevent you from driving your vehicle properly.  
• You cannot connect a USB device via a USB hub and  
Multi Card Reader.  
• Take backups of the audio files used with this unit.  
The files can be erased depending on the operating  
conditions of the USB device.  
We shall have no compensation for any damage  
arising out of erasure of the stored data.  
• No USB device comes with this unit. You need to  
purchase a commercially available USB device.  
• When connecting the USB device, usage of the CA-  
U1EX (option) is recommended.  
Normal playback is not guaranteed when a cable  
other than the USB compatible cable is used.  
Connecting a cable whose total length is longer  
than 5 m can result in abnormal playback.  
Information on Disposal of Old Electrical  
and Electronic Equipment and Batteries  
(applicable for EU countries that have  
adopted separate waste collection systems)  
Products and batteries with the symbol  
(crossed-out wheeled bin) cannot be  
disposed as household waste.  
Old electrical and electronic equipment  
and batteries should be recycled at a facility  
capable of handling these items and their  
waste byproducts.  
Contact your local authority for details in  
locating a recycle facility nearest to you.  
Proper recycling and waste disposal will  
help conserve resources whilst preventing  
detrimental effects on our health and the  
environment.  
Notice: The sign “Pb” below the symbol for  
batteries indicates that this battery  
contains lead.  
The marking of products using lasers  
(Except for some areas)  
About “KENWOOD Music Editor”  
• This unit supports the PC application “KENWOOD  
Music Editor Lite ver1.0” or later.  
CLASS 1  
• When you use the audio file with database  
information added by the “KENWOOD Music Editor  
Lite ver1.0, you can search a file by title, album or  
artist name using the <Music Search> (page 12).  
• In the Instruction manual, the term “Music Editor  
media” is used to mean the device that contains  
audio files with database information added with  
KENWOOD Music Editor.  
LASER PRODUCT  
The label is attached to the chassis/case and says  
that the component uses laser beams that have been  
classified as Class 1. It means that the unit is utilizing  
laser beams that are of a weaker class. There is no  
danger of hazardous radiation outside the unit.  
• “KENWOOD Music Editor Lite ver1.0” is available from  
the following web site:  
• For further information on “KENWOOD Music Editor  
Lite ver1.0, refer to the site above or the application  
help.  
English  
|
17  
Accessories/Installation Procedure  
with the ignition, connect the ignition wire to a power  
source that can be turned on and off with the ignition key.  
Use a commercially available conversion connector if the  
connector does not fit in the vehicle connector.  
Insulate unconnected wires with vinyl tape or other similar  
material. To prevent a short circuit, do not remove the caps  
on the ends of the unconnected wires or the terminals.  
If the console has a lid, make sure to install the unit so that  
the faceplate will not hit the lid when closing and opening.  
If the fuse blows, first make sure the wires aren’t touching  
to cause a short circuit, then replace the old fuse with one  
with the same rating.  
Accessories  
1
..........1  
2
..........2  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may be damaged or fail to  
work if you share the - wires or ground them to any metal  
part in the car.  
Installation Procedure  
After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
Mount the unit so that the mounting angle is 30° or less.  
1. To prevent short circuits, remove the key from the  
ignition and disconnect the - terminal of the  
battery.  
2. Make the proper input and output wire  
connections for each unit.  
3. Connect the wire on the wiring harness.  
4. Take Connector B on the wiring harness and  
connect it to the speaker connector in your vehicle.  
5. Take Connector A on the wiring harness and  
connect it to the external power connector on your  
vehicle.  
6. Connect the wiring harness connector to the unit.  
7. Install the unit in your car.  
8. Reconnect the - terminal of the battery.  
9. Press the reset button.  
¤
Mounting and wiring this product requires skills and  
experience. For safety’s sake, leave the mounting and wiring  
work to professionals.  
Make sure to ground the unit to a negative 12V DC power  
supply.  
Do not install the unit in a spot exposed to direct sunlight  
or excessive heat or humidity. Also avoid places with too  
much dust or the possibility of water splashing.  
Do not use your own screws. Use only the screws provided.  
If you use the wrong screws, you could damage the unit.  
If the power is not turned ON (“PROTECT” is displayed),  
the speaker wire may have a short-circuit or touched the  
chassis of the vehicle and the protection function may  
have been activated. Therefore, the speaker wire should be  
checked.  
Make sure that all wire connections are securely made by  
inserting jacks until they lock completely.  
If your vehicle’s ignition does not have an ACC position, or  
if the ignition wire is connected to a power source with  
constant voltage such as a battery wire, the power will not  
be linked with the ignition (i.e., it will not turn on and off  
along with the ignition). If you want to link the unit’s power  
|
18 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Connecting Wires to Terminals  
CA-U1EX  
(Optional accessory)  
USB connector  
AUX input (Stereo)  
Use the mini-plug cable which is stereo type and  
does not have any resistance.  
FM/AM antenna input (JASO)  
Front side  
R
L
Rear output/ Sub Woofer output  
(KDC-4547U/KDC-4047U/KDC-4047UM/  
KDC-414U/KDC-414UM only)  
Wiring harness  
(Accessory1)  
Fuse (10A)  
Steering remote control  
(Light Blue/Yellow)  
To use the steering wheel remote control feature,  
you need to an exclusive remote adapter (not  
supplied) matches your car is required.  
(KDC-4547U/KDC-4047U/KDC-4047UM/KDC-414U/  
KDC-414UM only)  
REMOTE CONT  
STEERING WHEEL  
REMOTE INPUT  
Mute control wire (Brown)  
Connect to the terminal that is grounded when  
either the telephone rings or during conversation.  
MUTE  
To connect the Kenwood navigation system,  
consult your navigation manual.  
If no connections are made, do not  
let the wire come out from the tab.  
Power control/ Motor antenna  
control wire (Blue/White)  
Connect either to the power control terminal  
when using the optional power amplifier, or to the  
antenna control terminal in the vehicle.  
P.CONT  
ANT.CONT  
Battery wire (Yellow)  
Ignition wire (Red)  
See next page.  
A–7 Pin (Red)  
A–4 Pin (Yellow)  
Connector A  
Connector B  
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
English  
|
19  
Connecting Wires to Terminals  
Connector Function Guide  
Pin Numbers for Cable Colour  
ISO Connectors  
Functions  
External Power  
Connector  
A-4  
A-5  
A-7  
A-8  
Yellow  
Blue/White  
Red  
Battery  
Power Control  
Ignition (ACC)  
Earth (Ground)  
Connection  
Black  
Speaker  
Connector  
B-1  
B-2  
B-3  
B-4  
B-5  
B-6  
B-7  
Purple  
Purple/Black  
Gray  
Gray/Black  
White  
White/Black  
Green  
Rear Right (+)  
Rear Right (–)  
Front Right (+)  
Front Right (–)  
Front Left (+)  
Front Left (–)  
Rear Left (+)  
Rear Left (–)  
B-8  
Green/Black  
2WARNING  
Connecting the ISO Connector  
The pin arrangement for the ISO connectors depends on  
the type of vehicle you drive. Make sure to make the proper  
connections to prevent damage to the unit.  
The default connection for the wiring harness is described in  
1 below. If the ISO connector pins are set as described in 2,  
make the connection as illustrated.  
Please be sure to reconnect the cable as shown 2 below to  
install this unit to the Volkswagen vehicles etc.  
1(Default setting) The A-7 pin (red) of the vehicle’s  
ISO connector is linked with the ignition, and  
the A-4 pin (yellow) is connected to the constant  
power supply.  
Ignition cable (Red)  
Unit  
Battery cable (Yellow)  
A-7 Pin (Red)  
Vehicle  
A-4 Pin (Yellow)  
2The A-7 pin (red) of the vehicle’s ISO connector is  
connected to the constant power supply, and the  
A-4 pin (yellow) is linked to the ignition.  
Ignition cable  
A-7 Pin (Red)  
(Red)  
Unit  
Vehicle  
A-4 Pin (Yellow)  
Battery cable  
(Yellow)  
|
20 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
Installation/Removing the Unit  
Installation  
Removing the Hard Rubber Frame  
1 Engage the catch pins on the removal tool and  
remove the two locks on the upper level.  
Upper the frame and pull it forward as shown in  
the figure.  
Lock  
Catch  
Bend the tabs of the mounting  
sleeve with a screwdriver or similar  
utensil and attach it in place.  
Accessory2  
Removal tool  
Make sure that the unit is installed securely in place. If the  
unit is unstable, it may malfunction (for example, the sound  
may skip).  
2 When the upper level is removed, remove the  
lower two locations.  
The frame can be removed from the bottom side in the  
same manner.  
Removing the Unit  
¤ CAUTION  
Install this unit in the console of your vehicle.  
1 Refer to the section <Removing the hard rubber  
Do not touch the metal part of this unit during and  
shortly after the use of the unit. Metal part such as  
the heat sink and enclosure become hot.  
frame> and then remove the hard rubber frame.  
2 Detach the faceplate.  
3 Insert the two removal tools deeply into the slots  
on each side, as shown.  
4 Lower the removal tool toward the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
Accessory2  
¤
Be careful to avoid injury from the catch pins on the  
removal tool.  
5 Pull the unit all the way out with your hands, being  
careful not to drop it.  
English  
|
21  
Troubleshooting Guide  
Some functions of this unit may be disabled by  
some settings made on this unit.  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
!
• Cannot set up the subwoofer.  
• Cannot set up the low pass filter.  
• No output from the subwoofer.  
• <Subwoofer output> of <Function Setting> (page  
8) is not set to On.  
General  
? The Touch Sensor Tone (beep sound) does not  
sound.  
• Preout is not set to subwoofer. “SWITCH PRE”/  
“SWITCH PREOUT” of <Function Setting> (page 8)  
The preout jack is being used.  
The Touch Sensor Tone cannot be output from  
the preout jack.  
!
Cannot set up the subwoofer Phase.  
Subwoofer Low Pass Filter is set to “THROUGH.  
“LPF SUB-W”/ “LPF SUBWOOFER” of <Function  
Setting> (page 8)  
Tuner source  
? Radio reception is poor.  
The car antenna is not extended.  
Pull the antenna out all the way.  
!
!
Power OFF Timer does not function.  
<Exit of the Demonstration Mode> (page 4) is not  
turned off.  
Disc source  
? The specified disc does not play, but another one  
The number of songs contained in "SONGS"  
category of this unit is different from that  
contained in "SONGS" category of iPod.  
Podcast files are not counted in this unit as this unit  
does not support the playback of podcast files.  
plays instead.  
The specified CD is quite dirty.  
Clean the CD, referring to the CD cleaning of the  
section on <Handling CDs> (page 3).  
The disc is severely scratched.  
Try another disc instead.  
!
Volume cannot be adjusted.  
• The unit is set to Music Search mode. Cancel the  
Music Search mode. (page 12)  
Audio file source  
• The unit is set to Function Setting mode. Cancel  
the Function Setting mode. (page 8)  
? The sound skips when an Audio file is being  
played.  
The media is scratched or dirty.  
Clean the media, referring to the CD cleaning of  
the section on <Handling CDs> (page 3).  
The recording condition is bad.  
Record the media again or use another media.  
|
22 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  
NA DEVICE:  
• An unsupported USB device is connected.  
• Connection to the iPod has failed.  
Check that the connected iPod is an iPod  
that is supported. See <About Audio file>  
(page 16) for information on supported  
iPods.  
The messages shown below display your  
systems condition.  
TOC ERROR:  
The CD is quite dirty. The CD is upside-down.  
The CD is scratched a lot.  
ERROR 05:  
ERROR 99:  
The disc is unreadable.  
NO MUSIC/ERROR 15:  
• The connected USB device contains no  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If the  
“ERROR 99” code does not disappear,  
consult your nearest service center.  
playable audio file.  
• Media was played that does not have data  
recorded that the unit can play.  
IN (Blink):  
PROTECT:  
The CD player section is not operating  
properly.  
USB ERROR:  
iPod ERROR:  
Some trouble may have occurred to the  
connected USB device.  
Remove the USB device, then cycle the  
power switch to ON. If the same display is  
repeated, use another USB device.  
Reinsert the CD. If the CD cannot be  
ejected or the display continues to flash  
even when the CD has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
Connection to the iPod has failed.  
Remove the USB device and then  
reconnect it.  
Confirm that the software for the iPod is  
the latest version.  
The speaker wire has a short-circuit or  
touches the chassis of the vehicle, and then  
the protection function is activated.  
Wire or insulate the speaker cable  
properly and press the reset button. If  
the “PROTECT” code does not disappear,  
consult your nearest service center.  
USB REMOVE: The Remove mode has been selected for the  
USB device/iPod. You can remove the USB  
device/iPod safely.  
NA FILE:  
An Audio file is played with a format that this  
unit can’t support.  
COPY PRO:  
A copy-protected file is played.  
READ ERROR: The file system of the connected USB device  
is broken.  
Copy the files and folders for the USB  
device again. If the error message is still  
displayed, initialize the USB device or use  
other USB devices.  
NO DEVICE:  
The USB device is selected as a source  
although no USB device is connected.  
Change the source to any source other  
than USB. Connect an USB device, and  
change the source to USB again.  
English  
|
23  
Specifications  
FM tuner section  
USB Interface  
Frequency range (50 kHz space)  
: 87.5 MHz – 108.0 MHz  
USB Standard  
: USB1.1/ 2.0 (Full speed)  
Usable sensitivity (S/N = 26dB)  
: 1 μV/75 Ω  
Maximum Supply current  
: 500 mA  
Quieting Sensitivity (DIN S/N = 46dB)  
: 2.5 μV/75 Ω  
File System  
: FAT16/ 32  
Frequency response ( 3.0 dB)  
: 30 Hz – 15 kHz  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
Signal to Noise ratio (MONO)  
: 63 dB  
WMA decode  
: Compliant with Windows Media Audio  
Stereo separation (1 kHz)  
: 40 dB  
AAC decode  
: AAC-LC .m4a” files  
MW tuner section  
Audio section  
Frequency range (9 kHz space)  
: 531 kHz – 1611 kHz  
Maximum output power  
: 50 W x 4  
Usable sensitivity (S/N = 20dB)  
: 36 μV  
Output power (DIN 45324, +B=14.4V)  
: 30 W x 4  
Speaker Impedance  
: 4 – 8 Ω  
LW tuner section  
Frequency range  
: 153 kHz – 279 kHz  
Usable sensitivity (S/N = 20dB)  
: 57 μV  
Tone action  
Bass : 100 Hz 8 dB  
Middle : 1 kHz 8 dB  
Treble : 10 kHz 8 dB  
Preout level / Load (CD) (KDC-4547U/ KDC-4047U/  
KDC-4047UM/ KDC-414U/ KDC-414UM)  
: 2000 mV/10 kΩ  
CD player section  
Preout impedance (KDC-4547U/ KDC-4047U/  
KDC-4047UM/ KDC-414U/ KDC-414UM)  
: ≤ 600 Ω  
Laser diode  
: GaAlAs  
Digital filter (D/A)  
: 8 Times Over Sampling  
Auxiliary input  
Frequency response ( 3 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 10 kΩ  
D/A Converter  
: 24 Bit  
Spindle speed  
: 500 – 200 rpm (CLV)  
Wow & Flutter  
: Below Measurable Limit  
Frequency response ( 1 dB)  
: 20 Hz – 20 kHz  
Total harmonic distortion (1 kHz)  
: 0.01 %  
Signal to Noise ratio (1 kHz)  
: 105 dB  
Dynamic range  
: 93 dB  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
General  
Operating voltage (11 – 16V allowable)  
: 14.4 V  
Maximum Current consumption  
: 10 A  
Installation Size (W x H x D)  
: 182 x 53 x 155 mm  
Weight  
: 1.3 kg  
AAC decode  
: AAC-LC .m4a” files  
Specifications subject to change without notice.  
This symbol mark indicates that  
Kenwood manufactured this product  
so as to decrease harmful influence on  
the environment.  
|
24 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U  

Quasar VM D52 User Manual
Panasonic H HS35100 User Manual
Panasonic AG HCK10 User Manual
Nikon Coolpix P300 User Manual
Melissa 246 029 User Manual
Life Fitness C7 User Manual
Kodak IMAGE SENSOR KAI 02150 User Manual
KitchenAid KUWS246ESS01 User Manual
Kenwood Car Stereo System KDC W4041 User Manual
JVC LYT1496 001A User Manual