LYT2498-001A-M
EN
ENGLISH
FRANÇAIS
ESPAÑOL
Live Streaming Camera
U
GV-LS1
PORTUGUÊS
Basic User Guide
For Future Reference:
Enter the Model No. (located on the bottom
of the camera) and Serial No. (located on the
battery pack mount of the camera) below.
Model No.
Serial No.
Dear Customers
Thank you for purchasing this JVC product.
Before use, please read the Safety Precautions and Cautions on p.2 and p.4 to ensure
use of this product.
Detailed User Guide
This product is provided with "Basic User Guide" (this manual) and "Detailed User
Guide". For more details on operating this product, please refer to the "Detailed User
Guide" at the following website.
Contents
Safety Precautions ................................2
Cautions ................................................4
About drip-proof performance................6
Verifying the Accessories ......................7
Component Names and Functions........8
Attaching/Removing Devices.................9
Preparation before Use........................10
Using the Camera................................12
Specifications ......................................14
GVLS1_basic_US.indd 1
12/08/08 9:36
CAUTION:
Remember that this unit is intended for private
consumer use only.
Any commercial use without proper permission is
prohibited. (Even if you record an event such as a show,
performance or exhibition for personal enjoyment, it
is strongly recommended that you obtain permission
beforehand.)
To maintain compliance with FCC' s RF exposure
guidelines, use only the supplied antenna.
Unauthorized antenna, modification, or attachments
could damage the transmitter and may violate FCC
regulations.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may Cause undesired
operation.
Trademarks
•
AVCHD and AVCHD logo are trademarks of Panasonic
Corporation and Sony Corporation.
•
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
•
•
Android™ is a trademark of Google Inc.
Windows® is either registered trademark or trademark of
Microsoft Corporation in the United States and/or other
countries.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
•
•
iPod, iPhone, iMovie and iPhoto are trademarks of
Apple Inc., registered in the U.S. and other countries.
Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
Wi-Fi, Wi-Fi logo, Wi-Fi CERTIFIED, Wi-Fi CERTIFIED
logo, WPA, and WPA2 are trademarks or registered
trademarks of Wi-Fi Alliance.
Other product and company names included in this
instruction manual are trademarks and/or registered
trademarks of their respective holders. Marks such as
™ and ® have been omitted in this manual.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer' s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
•
•
10.Only use attachments/accessories specified by the
manufacturer.
11.Use only with the cart,
stand, tripod, bracket,
or table specified by the
When using the AC adapter in areas other than
the USA
manufacturer, or sold with
the apparatus.
When a cart is used, use
The provided AC adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
caution when moving the
cart/apparatus combination
to avoid injury from tip-over.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit's power cord to an AC
wall outlet other than American National Standard C73
series type use an AC plug adapter, called a "Siemens
Plug", as shown.
12.Unplug this apparatus during lightning storms or
when unused for long periods of time.
13.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
For this AC plug adapter, consult your nearest JVC
dealer.
Plug Adapter
•
•
Remove the AC adapter from the AC wall outlet when
not in use.
Do not leave dust or metal objects adhered to the AC
wall outlet or AC adapter (power/DC plug).
Be sure to use the supplied AC adapter.
Do not use the supplied AC adapter with other
devices.
If this symbol is shown, it is only valid in
the European Union.
•
•
3
GVLS1_basic_US.indd 3
12/08/08 9:36
Cautions
Recording Medium
Main Unit
•
Be sure to follow the guidelines below to
prevent corruption or damage to your recorded
data.
• For safety, DO NOT
... open the camcorder's chassis.
... disassemble or modify the unit.
... allow inflammables, water or metallic objects to
enter the unit.
•
Do not bend or drop the recording medium, or
subject it to strong pressure, jolts or vibrations.
Do not splash the recording medium with water.
Do not use, replace, or store the recording
medium in locations that are exposed to strong
static electricity or electrical noise.
•
•
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
•
•
Do not turn off the camcorder power or remove
the battery or AC adapter during shooting,
playback, or when otherwise accessing the
recording medium.
Do not bring the recording medium near objects
that have a strong magnetic field or that emit
strong electromagnetic waves.
Do not store the recording medium in locations
with high temperature or high humidity.
Do not touch the metal parts.
... place naked flame sources, such as lighted
candles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to the
power plug or an AC wall outlet.
... insert any objects in the camcorder.
• Avoid using the unit
•
•
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near
a cooking stove.
•
When formatting or erasing data using the
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C
or 104°F) or extremely low (under 0°C or 32°F)
temperatures.
camcorder, only the file administration information
is changed. The data is not completely erased from
the recording medium.If you want to completely
erase all of the data, we recommend either using
commercially available software that is specially
designed for that purpose, or by physically
• DO NOT leave the unit
destroying the camcorder with a hammer etc.
... in places of over 50°C (122°F).
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the unit
in high places while a cable is connected may
result in a malfunction if the cable is caught and
the unit falls onto the floor.
• To protect the unit, DO NOT
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration during
transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively when using the hand strap.
... swing the soft camcorder case excessively
when the camcorder is inside it.
... store the camcorder in a dusty or sandy area.
• To prevent the unit from dropping,
• When using the camcorder with a tripod, attach
the camcorder to the tripod securely.
If the camcorder drops, you may be injured and the
camcorder may be damaged.
When a child uses the unit, there must be parental
guidance.
4
GVLS1_basic_US.indd 4
12/08/08 9:36
Battery Pack (optional)
Declaration of Conformity
Model Number : GV-LS1
Trade Name : JVC
Responsible party : JVC AMERICAS CORP.
Address : 1700 Valley Road Wayne, N. J. 07470
Telephone Number : 973-317-5000
The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure to
read the following cautions:
Terminals
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
• To avoid hazards
... do not burn.
... do not short-circuit the terminals. Keep it
away from metallic objects when not in use.
When transporting, carry the battery in a
plastic bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C (140°F), as this may cause
the battery to overheat, explode or catch fire.
... use only specified chargers.
• To prevent damage and prolong
service life
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C (50°F to 95°F). Cooler temperatures
require longer charging time, or in some
cases stop charging at all.
Warmer temperatures prevent complete
charging, or in some cases stop charging at
all.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... keep a 30% battery level ( ) if the battery
pack is not to be used for a long period of
time.
In addition, fully charge and then fully
discharge the battery pack every 6 months,
then continue to store it at a 30% battery
level ( ).
Changes or modifications not approved by JVC
could void the user's authority to operate the
equipment. This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures: Reorient or relocate the receiving
antenna. Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
Consult the dealer or an experienced radio/TV
technician for help.
... do not drop or subject to strong impact.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
ATTENTION:
The product you have purchased
is powered by a rechargeable
battery that is recyclable.
Please call 1-800-8-BATTERY
for information on how to recycle
this battery.
(USA and Canada only)
5
GVLS1_basic_US.indd 5
12/08/08 9:36
About drip-proof performance
Read the following and use the unit properly.
Malfunctions caused by incorrect usage are not covered by the warranty.
You can use the unit in the rain without trouble.
To use the unit with drip-proof performance, you need the battery (sold separately).
• When the unit is exposed to salt water,
wash the unit gently with a soft stream
of water.
Before use
1
2
Attach the battery (sold separately).
Cautions
• Do not use a hot dryer to dry the unit;
otherwise, the drip-proof performance
will be decreased.
Attach the rear cover firmly.
• Do not leave the unit in extremely low
temperature or in high temperature
˚
C
over 40
(in direct sunlight, inside a
car on a hot day, near a heater, etc.);
otherwise, the drip-proof performance
will be decreased.
• Do not remove the rear cover or connect
cables while wet.
• Note that JVC KENWOOD Corporation
bears no responsibility for any loss of
data by inundation.
• We recommend changing the drip-
proof parts once a year to maintain
performance. Contact your nearest
dealer (charge basis).
Cautions
• Do not remove the rear cover while wet.
• Do not use the unit in water; otherwise
a malfunction may occur.
• The unit is not water proof. Do not
pour water on the unit directory from a
faucet, shower, etc.
After use
• Wipe drops of water with a soft cloth
and dry the unit in well ventilated place
avoiding direct sunlight.
• Turn the unit upside down to drain water
around the microphone.
• Wipe off the stains after removing any
sand, etc. so as not to scratch the unit.
• Do not wipe the unit with chemicals,
soaps, neutral detergents,alcohol, etc.
6
GVLS1_basic_US.indd 6
12/08/08 9:36
Verifying the Accessories
AC Adapter *1
AC cord
LAN Cable
QAL1466-001
Software CD-ROM
Rear Cover
Basic User Guide
(This manual)
*1 Use the supplied AC cord when connecting the AC adapter.
● Purchase an SD card separately.
Operation confirmed with the following SD cards.
Manufacturer
Panasonic
TOSHIBA
SanDisk
Video
Class 4 or higher compatible SD card (2 GB)
Class 4 or higher compatible SDHC card (4 GB to 32 GB)
Class 4 or higher compatible SDXC card (48 GB to 64 GB)
(When recording with video quality "UXP", Class 6 or higher
is recommended.)
• Using SD cards (including SDHC/SDXC cards) other than those specified above
may result in recording failure or data loss.
• Not all SD card operations are guaranteed. Some operations may not be
performed due to specification changes, etc.
• Do not touch the terminals of the SD card. Doing so may cause data loss.
● When using the AC adapter overseas, use a commercially available
conversion plug appropriate for the country or region.
7
GVLS1_basic_US.indd 7
12/08/08 9:36
Component Names and Functions
● Camera
<Front>
<Back>
9
-
=
~
1
3
MIC
DC
RESET
6
7
DIRECT WLAN LAN(OFF)
AV
4
5
ETHERENT
8
0
2
<Top>
<Bottom>
!
@
#
$
%
1 Internal mic: Transmits/Records
sounds coming through this mic when
no external mic is connected.
2 Lens: Do not touch it directly.
3 LED light: Works as a light in dark
places.
4 Information lamp: Can be lit up to
indicate the recording status, etc.
5 Camera sensor: Adjusts the white
balance automatically.
6 [RESET] button: Resets the network
settings. Press and hold this button
with the tip of a paper clip or the like
when the AC adapter is connected.
7 LAN terminal: Connects to a
computer or router via a LAN cable.
8 Network mode switch: Switches the
network mode.
User Guide."
0 SD card slot: For compatible cards,
see p.7.
- [MIC] terminal: Connect an external
mic.
= [DC] connector: Connect the
supplied AC adapter.
~ [AV] connector: Connect a separately
purchased AV cord.
! Hot shoe: Mount camera accessories
or the like.
@ Shooting button: Starts recording. To
stop, press this button again.
# [WPS] button: Press and hold to
connect wirelessly (Wi-Fi) in WPS
mode for the first time.
$ [POWER] button: Press and hold to
power on. To power off, press and hold
this button again.
9 Battery terminal: Connect a
separately purchased battery pack.
(BN-VG139U)
% Tripod mounting hole: Mount a
separately purchased tripod.
For more details, refer to the "Detailed
8
GVLS1_basic_US.indd 8
12/08/08 9:36
Attaching/Removing Devices
Inserting/Removing an SD card
Insert a commercially available SD card before recording.
● Inserting
● Removing
Insert the card straight with the terminal
facing to the right.
Push the card in once, and pull it out
straight.
• Turn off the power before inserting/removing the SD card.
• Make sure that the write protect switch of the SD card is not set to LOCK (writing
protected).
• Some cards need to be formatted with this unit. For details, refer to the "Detailed
User Guide".
9
GVLS1_basic_US.indd 9
12/08/08 9:36
Preparation before Use
Connecting the Camera to
Your Computer
Connecting the AC Adapter
Connect the supplied AC adapter to the
DC connector.
To set up the camera, first connect it to
your computer.
MIC
Required operating environment
RESET
DC
DIRECT WLAN LAN(OFF)
Browser: Internet Explorer 9 or later
V
ETHERENT
1
Attach the supplied LAN cable to
the camera.
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERENT
BATT.
2
3
Connect the camera to your
computer via the LAN cable.
Set the network mode switch to
•
[LAN OFF].
MIC
DC
DIRECT WLAN LAN(OFF)
RESET
DIRECT WLAN LAN(OFF)
AV
ETHERENT
• If the network mode switch is set to
[DIRECT] or [WLAN], the LAN terminal
cannot be used.
• While the power is on, switching the
network mode switch does not change
the setting.
• Do not use cables (AV cable,
microphone, etc.) with L-shaped
connecters.
• For other ways of connecting, see
"Detailed User Guide".
10
GVLS1_basic_US.indd 10
12/08/08 9:36
Changing the settings
Configuring the Camera Settings
Appropriate forYour Needs
Select "NETWORK", "CAMERA/PAN
TILTER", or "MANAGE" in the left window
of the screen to change the settings. Click
"+" on the left of each item to show the
sub categories.
Specify the video format, zoom, etc.
appropriate for your needs. Configure the
settings on a browser.
Logging in as an administrator
● "NETWORK"
• "WIRED NETWORK"
1
If the power is not turned on, press
and hold the [POWER] button to
power on.
The [POWER] button starts blinking.
Wait until it stops blinking and stays lit.
For establishing a wired connection.
• "WIRELESS NETWORK"
For connecting wirelessly.
• "MONITORING SETTINGS"
For connecting via a network.
• "STREAM SETTINGS"
2
Set the Network Setting of the
computer as follows.
IP Address: 192.168.1.2 to
192.168.1.254 (except 192.168.1.100)
(example) 192.168.1.23
Format for transmitting/recording.
● "CAMERA/PAN TILTER"
• "CAMERA SETTINGS"
Camera settings such as zoom.
• "PAN TILTER SETTINGS"
Pantilter settings. Pan/Tilt is available
when zooming is activated.
● "MANAGE"
Subnet mask: 255.255.255.0
Make a note of the current network
settings before operation for resetting
the network setting.
• "COMMON SETTINGS"
Change the password of the
administrator, set the clock, etc.
• "MEDIA MANAGEMENT"
Format the SD card.
3
4
Start Internet Explorer, and enter
address bar.
Enter the user name and password
of the administrator.
• "TURN OFF CAMERA"
Initial setting: USERNAME "root",
PASSWORD "password".
Turn off the power of the camera.
* The power cannot be turned on via
the browser.
If login is successful, the setup screen
appears.
For details, refer to the "Detailed User
Guide".
11
GVLS1_basic_US.indd 11
12/08/08 9:36
Using the Camera
Viewing on a Browser
Installing the Supplied Software
Internet Explorer.
"JVC CAM Control" allows you to control
multiple cameras, change the angle, etc.
If you log in using the user name and
password of the administrator or those
set in "MONITORING SETTINGS" (p.11),
you can watch a video on a browser.
• To watch a video via a network, the
"MONITORING SETTINGS" (p.11) are
required. Entering the user name and
password of our DDNS service allows
you quick access.
1
Insert the supplied software CD-
ROM into the CD/DVD drive of your
computer.
2
Follow the on-screen instructions
to finish the installation.
To acquire a DDNS service account,
visit our website
<Example of browser>
4
1
5
6
2
3
1 Tab: Switch the display. (Monitor:
Camera image and control panel,
File: Images on the SD card, Status:
Message history)
2 Control panel: Controls the camera/
pantilter.
3 Message Bar: Displays an error
message, etc.
4 Logout: Click this to log out.
5 Status: Indicates the current status
such as the remaining battery power.
6 Stream settings: Displays the stream
settings.
12
GVLS1_basic_US.indd 12
12/08/08 9:36
Streaming Images
Installing the Application for a
Mobile Terminal
Installing the supplied "Camera Driver"
allows you to use this unit as a web
camera. Use the distribution software
ustream.tv/producer) or website for the
web camera to stream the images.
“Camera Driver” will be installed along
with “JVC CAM Control.”
You can pinch, drag, etc. on the touch
panel of a smartphone/tablet computer to
operate the camera intuitively. In addition,
the camera can be panned/tilted by
moving the tablet computer.
1
Download the software appropriate
for your environment.
• Smartphone (Android OS 2.3 or later)
Download "JVC CAM Control Single"
from Google Play Store.
• Android tablet (Android OS 2.3 or
later, Screen size: 7 inches or more,
Resolution: 1024 x 600 or more)
Download "JVC CAM Control Multi"
from Google Play Store.
• iPhone/iPod/iPad touch (iOS 5.1.1 or
later)
Download "JVC CAM Control" from
App Store.
2
Follow the on-screen instructions
to finish the installation.
13
GVLS1_basic_US.indd 13
12/08/08 9:36
Specifications
Camera
Power supply
Power consumption
Dimensions (mm)
Mass
Using the AC adapter: DC 5 V, Using a battery pack: DC 3.6 V
4.8 W
73 x 48 x 89 (2 7/8'' x 1 15/16'' x 3 9/16'') (W × H × D)
g
Approx. 229 (0.51 lbs) (excluding the battery)
Allowable operating temperature: 0˚ to 40˚ (32˚ to 104˚ ), Allowable stor-
C, C, F,
F
Operating
age temperature: – 20˚ to 50˚ (− 4˚ to 122˚ ), Allowable relative humidity:
C, C, F,
F
environment
35 % to 80 %
1/2.3: 12.40 mil. pixels (BSI CMOS)
5.40 mil. to 2.07 mil. pixels (Image stabilization: OFF)
Image element
Image range
F1.2 to F2.8 f = 3.76 (3/16'') mm to 37.6 mm (1 1/2'')
Equivalent to 35 mm (1 7/16'') camera: 29.5 mm (1 3/16'') to 476 mm (18
3/4'')
Lends
Zoom
Digital zoom: up to 20x
Video recording
method
AVCHD standard certified, Video: AVC/H.264, Audio: Dolby Digital (2ch)
Media
SD/SDHC/SDXC cards (not supplied)
Wired: 10BASE-T/100BASE-TX, Wireless: IEEE 802.11b/g/n 2.4GHz band
only
Network standard
Battery for the
clock
Secondary battery
Stream output format
Stream 1
Stream 2
Video
JPEG (640x360)
LPCM 16 kHz 16 bit 1 ch
MPEG-2 TS
Format 1
None
Audio
System
—
Format 2 Video
Audio
H.264 Main Profile (720x480)
AAC 48 kHz 16 bit 2 ch
MPEG-2 TS
JPEG (640x360)
LPCM 16 kHz 16 bit 1 ch
—
System
Format 3 Video
Audio
H.264 High Profile (1920x1080)
AAC 48 kHz 16 bit 2 ch
JPEG (640x360)
LPCM 16 kHz 16 bit 1 ch
AC adapter (QAL1446-001)
Power supply
AC 100 V to 240 V, 50 Hz/60 Hz
DC 5 V, 2 A
Power consumption
˚
˚
˚
˚
˚
˚
˚
˚
Allowable operating 0 C to 40 C (32 F to 104 F) (10 C to 35 C (50 F to 95 F) at battery
temperature
Dimensions (mm)
Mass
charge)
44 x 29 x 96 (1 3/4'' x 1 3/16'' x 3 13/16'') (W × H × D, excluding AC cord and AC
plug)
Approx. 175 (0.39 lbs)
g
● Specifications and appearance are subject to change without notice due to
product improvements.
14
GVLS1_basic_US.indd 14
12/08/08 9:36
MEMO
15
GVLS1_basic_US.indd 15
12/08/08 9:36
©2012 JVC KENWOOD Corporation
C2N
0812HO-MW-VM
GVLS1_basic_US.indd 16
12/08/08 9:36
|