JVC Car Stereo System KD R412 User Manual

Having TROUBLE with operation?  
ENGLISH  
Please reset your unit  
Refer to page of How to reset your unit  
FRANÇAIS  
KD-R412/KD-R411/  
Vous avez des PROBLÈMES de fonctionnement?  
Réinitialisez votre appareil  
Référez-vous à la page intitulée Comment réinitialiser votre appareil  
KD-R35/KD-R312/KD-R311  
CD RECEIVER / RÉCEPTEUR CD  
Dear Customer,  
Cher(e) client(e),  
This apparatus is in conformance with the valid  
European directives and standards regarding  
electromagnetic compatibility and electrical safety.  
Cet appareil est conforme aux directives et  
normes européennes en vigueur concernant la  
compatibilité électromagnétique et à la sécurité  
électrique.  
European representative of Victor Company of  
Japan, Limited is:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
Représentant européen de la société Victor  
Company of Japan, Limited:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
61145 Friedberg  
Germany  
61145 Friedberg  
Allemagne  
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des  
affichages, référez-vous à la page 4.  
For installation and connections, refer to the separate manual. / Pour l’installation et les  
raccordements, se référer au manuel séparé.  
INSTRUCTIONS  
MANUEL D’INSTRUCTIONS  
EN, FR  
GET0624-003A  
© 2009 Victor Company of Japan, Limited  
1009DTSMDTJEIN  
[E/EU]  
CoverRear_KD-R412_003A_f.indd 1-2  
10/13/09 11:51:18 AM  
Thank you for purchasing a JVC product.  
Please read all instructions carefully before operation, to ensure your complete understanding and  
to obtain the best possible performance from the unit.  
IMPORTANT FOR LASER PRODUCTS  
1.CLASS 1 LASER PRODUCT  
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave  
all servicing to qualified service personnel.  
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with  
optical instruments.  
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.  
Warning:  
If you need to operate the unit while driving,  
be sure to look around carefully or you may be  
involved in a traffic accident.  
Battery  
Products  
For safety...  
Information for Users on Disposal of  
• Do not raise the volume level too much, as  
Old Equipment and Batteries  
this will block outside sounds, making driving  
dangerous.  
[European Union only]  
These symbols indicate that the product and  
the battery with this symbol should not be  
disposed as general household waste at its  
end-of-life.  
If you wish to dispose of this product and  
the battery, please do so in accordance with  
applicable national legislation or other rules  
in your country and municipality.  
By disposing of this product correctly, you  
will help to conserve natural resources and  
will help prevent potential negative effects  
on the environment and human health.  
• Stop the car before performing any  
complicated operations.  
Temperature inside the car...  
If you have parked the car for a long time in  
hot or cold weather, wait until the temperature  
in the car becomes normal before operating  
the unit.  
KD-R412/KD-R411 is equipped with the  
steering wheel remote control function.  
Before operating, connect a JVC's OE remote  
adapter (not supplied) which matches your car  
to the steering wheel remote input terminal on  
the rear of the unit.  
Notice:  
The sign Pb below the symbol for batteries  
indicates that this battery contains lead.  
• For details, refer also to the instructions  
supplied with the remote adapter.  
2
ENGLISH  
EN02-09_KD-R412_003A_f.indd  
2
10/15/09 2:32:58 PM  
How to read this manual  
CONTENTS  
The following icons/symbols are used to  
indicate:  
3
3
How to read this manual  
How to attach/detach the control  
panel  
Press and hold the button(s)  
until the desired operation  
[Hold]  
3
3
How to reset your unit  
How to forcibly eject a disc  
begins.  
4
Canceling the display  
demonstration  
Turn the control dial.  
Turn the control dial  
to make a selection,  
then press to confirm.  
4
5
6
8
Setting the clock  
Basic operations  
Listening to the radio  
Listening to a disc  
Reference page number  
Menu setting item  
(
XX)  
<XXXX>  
10 Listening to the USB device  
Continued on the next page  
(For KD-R412/KD-R411/KD-R35)  
11 Listening to the other external  
components  
How to attach/detach the control  
panel  
12 Using the remote controller  
(For KD-R412/KD-R411)  
13 Selecting a preset sound mode  
13 Menu operations  
17 More about this unit  
20 Maintenance  
21 Troubleshooting  
24 Specifications  
How to reset your unit  
Your preset adjustments  
will also be erased.  
How to forcibly eject a disc  
[Hold]  
• You can forcibly eject the loaded disc even  
if the disc is locked. To lock/unlock the disc,  
8.  
• Be careful not to drop the disc when it ejects.  
• If this does not work, reset your unit.  
ENGLISH  
3
EN02-09_KD-R412_003A_4.indd  
3
10/12/09 9:59:13 AM  
Canceling the display demonstration  
1 Turn on the power.  
4 Select <DEMO OFF>.  
2
[Hold]  
5
(Initial setting)  
3
6 Finish the procedure.  
Setting the clock  
1 Turn on the power.  
6 Adjust the minute.  
2
[Hold]  
(Initial setting)  
3 Select <CLOCK>.  
7 Select <24H/12H>.  
4 Select <CLOCK SET>.  
8 Select <24 HOUR> or  
<12 HOUR>.  
5 Adjust the hour.  
9 Finish the procedure.  
4
ENGLISH  
EN02-09_KD-R412_003A_4.indd  
4
10/12/09 9:59:13 AM  
Basic operations  
Ejects the disc  
Control dial  
Loading slot  
Display window  
Detaches the panel  
Auxiliary input jack  
For KD-R412/  
Remote sensor (for KD-R412/KD-R411)  
You can control this unit with an  
optionally purchased remote control,  
KD-R411/KD-R35  
RM-RK50 (  
12).  
USB (Universal Serial  
Bus) input jack  
When you press or hold the following button(s)...  
Button General operation  
• Turns on.  
• Selects the available sources (if the power is turned on). If the source is ready,  
playback also starts.  
• Turns off if pressed and held.  
• Adjusts the volume level.  
• Selects items.  
• Mutes the sound while listening to a source. If the source is “CD“ or “USB,“  
playback pauses. Press the control dial again to cancel muting or resume  
playback.  
• Confirms selection.  
• Selects the sound mode.  
• Enters tone level adjustment directly (  
13) if pressed and held.  
9).  
Enters playback mode menu directly (  
• Returns to the previous menu  
• Activates/deactivates TA Standby Reception  
• Enters PTY Searching mode if pressed and held  
Power off : Checks the current clock time  
Power on : Changes the display information  
ENGLISH  
5
EN02-09_KD-R412_003A_5.indd  
5
10/13/09 12:49:11 PM  
Listening to the radio  
~
]
“FM” or “AM”  
Ÿ
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.  
Manual search  
Automatic presetting (FM)—  
“M” flashes, then press  
the button repeatedly.  
SSM (Strong-station Sequential Memory)  
You can preset up to 18 stations for FM.  
[Hold]  
While listening to a station...  
When an FM stereo broadcast is  
hard to receive  
1
[Hold]  
2
1
[Hold]  
]
<TUNER>  
<SSM 01 – 06> / <SSM 07 – 12> /  
<SSM 13 – 18>  
]
<SSM>  
]
2
]
<TUNER>  
<MONO ON>  
]
<MONO>  
]
“SSM” flashes and local stations with  
the strongest signals are searched and  
stored automatically.  
Reception improves, but stereo effect  
will be lost.  
To preset another 6 stations, repeat the  
above procedure by selecting one of the other  
6 SSM setting ranges.  
To restore the stereo effect, repeat the same  
procedure to select <MONO OFF>.  
Changing the display information  
Frequency  
the beginning)  
=
Clock  
=
(back to  
6
ENGLISH  
EN02-09_KD-R412_003A_5.indd  
6
10/13/09 12:49:39 PM  
Manual presetting (FM/AM)  
The following features are available  
only for FM Radio Data System stations.  
You can preset up to 18 stations for FM and 6  
stations for AM.  
Searching for your favourite  
FM Radio Data System  
programme—PTY Search  
Ex.: Storing FM station of 92.50 MHz into preset  
number “04.”  
1
You can tune in to a station broadcasting your  
favourite programme by searching for a PTY  
code.  
]
“92.50MHz”  
[Hold]  
2
3
1
[Hold]  
“PRESET MODE” flashes.  
The last selected PTY code appears.  
2
]
Selects preset number “04.”  
“P04” flashes and “MEMORY” appears.  
]
Select one of your favourite  
programme types or a PTY code (  
and start searching.  
17),  
If there is a station broadcasting a  
programme of the same PTY code as you  
have selected, that station is tuned in.  
Selecting a preset station  
1
Standby receptions  
or  
2
TA Standby Reception  
TA Standby Reception allows the unit to switch  
temporarily to Traffic Announcement (TA) from  
any source other than AM.  
• The volume changes to the preset TA volume  
level if the current level is lower than the  
preset level (  
15).  
To activate TA Standby Reception  
If the TP indicator lights up, TA  
Standby Reception is activated.  
If the TP indicator flashes, TA  
Standby Reception is not yet  
activated.  
• To activate the reception, tune in to another  
station providing Radio Data System signals  
required for TA Standby Reception.  
• To deactivate the reception, press T/P BACK  
again.  
ENGLISH  
7
EN02-09_KD-R412_003A_5.indd  
7
10/12/09 10:31:57 AM  
Programme A broadcasting on different  
frequency areas (01 – 05)  
PTY Standby Reception  
PTY Standby Reception allows the unit to  
switch temporarily to your favourite PTY  
programme from any source other than AM.  
To activate and select your favourite PTY  
code for PTY Standby Reception, see “Menu  
operations: <PTY-STANDBY>.” (  
14)  
If the PTY indicator lights up, PTY Standby  
Reception is activated.  
To change the Network-Tracking Reception  
If the PTY indicator flashes, PTY Standby  
Reception is not yet activated.  
setting, see “Menu operations: <AF-REG>.”  
(
14)  
• To activate the reception, tune in to another  
station providing these signals.  
• To deactivate the reception, select <PTY OFF>  
Automatic station selection—  
Programme Search  
Usually when you select a preset number, the  
station preset in that number is tuned in.  
If the signals from the FM Radio Data System  
preset station are not sufficient for good  
reception, this unit, using the AF data, tunes in  
to another frequency possibly broadcasting the  
same programme as the original preset station  
is broadcasting.  
for the PTY code (  
goes off.  
14). The PTY indicator  
Tracing the same programme—  
Network-Tracking Reception  
When driving in an area where FM reception is  
not sufficient enough, this unit automatically  
tunes in to another FM Radio Data System  
station of the same network, possibly  
broadcasting the same programme with  
stronger signals.  
• See “Menu operations: <P-SEARCH>.” (  
15)  
Changing the display information  
Station name (PS)  
=
Station  
Programme  
Clock (back to  
Frequency  
type (PTY)  
=
=
=
the beginning)  
Listening to a disc  
]
Turn on the power.  
~
Ÿ
All tracks will be played repeatedly until you  
change the source or eject the disc.  
Stopping playback and ejecting  
Prohibiting disc ejection  
the disc  
[Hold]  
“NO DISC” appears.  
Press  
/SOURCE to listen to  
To cancel the prohibition, repeat the same  
procedure.  
another playback source.  
8
ENGLISH  
EN02-09_KD-R412_003A_4.indd  
8
10/12/09 9:59:15 AM  
Selecting the playback modes  
You can use only one of the following playback  
modes at a time.  
Selects folder of the MP3/WMA  
Selects track  
1
2
Fast-forwards or  
reverses the track  
]
“REPEAT”  
“RANDOM”  
[Hold]  
3
Selecting a track/folder  
1
REPEAT  
TRACK RPT : Repeats current track  
FOLDER RPT : Repeats current folder  
RANDOM  
2
FOLDER RND : Randomly plays all tracks  
of current folder, then  
tracks of next folders  
For MP3/WMA discs, select the desired folder,  
then the desired track by repeating step 2.  
• To return to the previous menu, press BACK  
ALL RND  
: Randomly plays all tracks  
To cancel repeat play or random play, select  
“RPT OFF” or “RND OFF.”  
.
Caution on volume setting:  
Discs produce very little noise compared  
with other sources. Lower the volume before  
playing a disc to avoid damaging the speakers  
by the sudden increase of the output level.  
Changing the display information  
Disc title/Album name/performer (folder  
name)*  
track number with the elapsed playing time  
Current track number with the clock  
time (back to the beginning)  
=
Track title (file name)*  
=
Current  
=
=
* If the current disc is an audio CD, “NO NAME”  
appears.  
If an MP3/WMA file does not have Tag  
information or <TAG DISPLAY> is set to  
<TAG OFF> (  
appear.  
14), folder name and file name  
ENGLISH  
9
EN02-09_KD-R412_003A_5.indd  
9
10/12/09 10:32:22 AM  
Listening to the USB device  
(For KD-R412/KD-R411/KD-R35)  
This unit can play MP3/WMA tracks stored in a USB device.  
USB input jack  
~
Ÿ
USB memory  
]
Turn on the  
power.  
All tracks will be played repeatedly until you change the  
source or detach the USB device.  
If a USB device has been attached...  
Cautions:  
Pressing /SOURCE turns on the power and  
playback starts from where it has been stopped  
previously.  
• If a different USB device is currently attached,  
playback starts from the beginning.  
• Avoid using the USB device if it might hinder  
your safety driving.  
• Do not pull out and attach the USB device  
repeatedly while “READING” is shown on the  
display.  
• Do not start the car engine if a USB device is  
connected.  
Stopping playback and detaching  
the USB device  
• This unit may not be able to play the files  
depending on the type of USB device.  
• Operation and power supply may not work as  
intended for some USB devices.  
• You cannot connect a computer to the USB  
input terminal of the unit.  
Straightly pull it out from the unit.  
“NO USB” appears. Press /SOURCE to listen to  
another playback source.  
You can operate the USB device in the same  
way you operate the files on a disc.  
• Make sure all important data has been backed  
up to avoid losing the data.  
• Do not leave a USB device in the car, expose  
to direct sunlight, or high temperature to  
avoid deformation or cause damages to the  
device.  
• Some USB devices may not work immediately  
after attaching USB device or turn on the  
power.  
Caution on volume setting:  
USB devices produce very little noise compared  
with other sources. Lower the volume before  
playing a USB to avoid damaging the speakers  
by sudden increase of the output level.  
• For more details about USB operations, see  
page 19.  
10  
ENGLISH  
EN10-17_KD-R412_003A_f.indd 10  
10/15/09 2:29:43 PM  
Listening to the other external  
components  
You can connect an external component to the  
AUX (auxiliary) input jack on the control panel.  
Preparation: Make sure <AUX ON> is selected  
~
]
“AUX IN”  
for the <SRC SELECT>  
=
<AUX IN> setting.  
Ÿ
!
Turn on the connected component  
and start playing the source.  
(
16)  
• For details, refer also to the instructions  
supplied with the adapter or external  
components.  
]
Adjust the volume.  
Adjust the sound as you  
want. ( 13)  
Connecting an external component to the AUX input jack  
Portable audio player,  
etc.  
3.5 mm stereo mini plug  
(not supplied)  
ENGLISH  
11  
EN10-17_KD-R412_003A_4.indd 11  
10/12/09 9:59:00 AM  
Using the remote controller  
(For KD-R412/KD-R411)  
KD-R412/KD-R411 can be remotely controlled  
as instructed here (with an optionally  
purchased remote controller). We recommend  
that you use remote controller RM-RK50 with  
your unit.  
Installing the lithium coin battery  
(CR2025)  
1
2
• Turns the power on if pressed briefly.  
When the power is on, pressing the  
button also mutes the sound or pauses.  
To cancel muting or resume playback,  
press the same button again.  
• Turns the power off if pressed and held.  
• Changes the preset stations.  
• Changes the folder of the MP3/WMA.  
Adjusts the volume level.  
Selects the sound mode.  
Selects the source.  
• Searches for stations if pressed briefly.  
• Fast-forwards or reverses the track if  
pressed and held.  
Caution:  
• Danger of explosion if battery is incorrectly  
replaced. Replace only with the same or  
equivalent type.  
3
4
5
6
• Battery shall not be exposed to excessive heat  
such as sunshine, fire, or the like.  
If the effectiveness of the remote controller  
decreases, replace the battery.  
• Changes the tracks if pressed briefly.  
Warning (to prevent accidents and  
damage):  
• Do not install any battery other than CR2025  
or its equivalent.  
Before using the remote controller:  
• Aim the remote controller directly at the  
remote sensor on the unit.  
• DO NOT expose the remote sensor to bright  
light (direct sunlight or artificial lighting).  
• Do not leave the remote controller in a place  
(such as dashboards) exposed to direct  
sunlight for a long time.  
• Store the battery in a place where children  
cannot reach.  
• Do not recharge, short, disassemble, heat the  
battery, or dispose of it in a fire.  
• Do not leave the battery with other metallic  
materials.  
• Do not poke the battery with tweezers or  
similar tools.  
Remote sensor  
• Wrap the battery with tape and insulate when  
throwing away or saving it.  
12  
ENGLISH  
EN10-17_KD-R412_003A_4.indd 12  
10/12/09 9:59:00 AM  
Selecting a preset sound mode  
You can select a preset sound mode suitable  
for the music genre.  
Storing your own sound mode  
You can store your own adjustments in memory.  
1
[Hold]  
FLAT  
BOOST  
the beginning)  
=
NATURAL  
=
DYNAMIC  
USER  
=
=
VOCAL  
(back to  
=
BASS BOOST  
=
2
]
<PRO EQ>  
<TREBLE>  
]
<BASS> / <MIDDLE> /  
While listening, you can adjust the tone level of  
the selected sound mode.  
3
4
1
[Hold]  
Adjust the sound elements of the  
selected tone. ( 19)  
2
Repeat steps 2 and 3 to adjust other  
tones.  
The adjustments made will be stored  
automatically in “USER.”  
Adjust the level (–06 to +06) of the  
selected tone (BASS / MIDDLE / TREBLE).  
The sound mode is automatically stored  
and changed to “USER.”  
The current sound mode changes to “USER”  
automatically.  
Menu operations  
Repeat step 2 if necessary.  
• To return to the previous menu,  
1
2
3
[Hold]  
press BACK  
• To exit from the menu, press DISP  
or MENU  
.
.
Category Menu item  
Selectable setting, [ Initial: Underlined  
]
DEMO  
DEMO ON : Display demonstration will be activated  
Display  
automatically if no operation is done for about  
demonstration  
20 seconds. (  
DEMO OFF : Cancels.  
4)  
CLOCK SET  
[ 0:00 ]  
: Adjust the hour, then the minute. (  
4)  
Clock setting  
ENGLISH  
13  
EN10-17_KD-R412_003A_4.indd 13  
10/12/09 9:59:00 AM  
Category Menu item  
Selectable setting, [ Initial: Underlined  
: For settings, 4.  
]
24H/12H  
Time display  
mode  
24 HOUR  
12 HOUR  
CLOCK ADJ *1  
Clock  
adjustment  
AUTO  
: The built-in clock is automatically adjusted  
using the CT (clock time) data in the Radio Data  
System signal.  
OFF  
: Cancels.  
BASS  
: For settings,  
13.  
MIDDLE  
TREBLE  
DIMMER  
DIMMER ON : Dims the display and button illumination.  
DIMMER OFF : Cancels.  
SCROLL ONCE : Scrolls the displayed information once.  
SCROLL AUTO : Repeats scrolling (at 5-second intervals).  
SCROLL OFF : Cancels.  
SCROLL *2  
Pressing DISP for more than one second can scroll the display  
regardless of the setting.  
TAG DISPLAY  
TAG ON  
: Shows the Tag information while playing MP3/  
WMA tracks.  
: Cancels.  
TAG OFF  
SSM*3  
Strong-station  
Sequential  
Memory  
SSM 01 – 06  
SSM 07 – 12  
SSM 13 – 18  
: For settings,  
6.  
AF-REG*4  
Alternative  
frequency/  
regionalization  
reception  
AF ON  
: When the currently received signals become  
weak, the unit switches to another station (the  
programme may differ from the one currently  
received). (The AF indicator lights up.)  
: When the currently received signals become  
weak, the unit switches to another station  
broadcasting the same programme. (The AF  
and REG indicators light up.)  
AF-REG ON  
OFF  
: Cancels.  
PTY-  
STANDBY*3,*4  
1
PTY OFF, PTY : Activates PTY Standby Reception with one of  
codes the PTY codes ( 17).  
*
*
*
*
Takes effect only when CT (clock time) data is received.  
2
3
4
Some characters or symbols will not be shown correctly (or will be blanked) on the display.  
Displayed only when the source is “FM.”  
Only for FM Radio Data System stations.  
14  
ENGLISH  
EN10-17_KD-R412_003A_4.indd 14  
10/12/09 9:59:01 AM  
Category Menu item  
Selectable setting, [ Initial: Underlined  
]
TA VOLUME*5  
Traffic  
announcement  
volume  
VOLUME 00 –  
VOLUME 50 (or  
VOLUME 00 –  
VOLUME 30)* 6  
[ VOLUME 15 ]  
:
P-SEARCH*5  
Programme  
search  
SEARCH ON  
SEARCH OFF  
: Activates Programme Search. (  
: Cancels.  
8)  
MONO *7  
Monaural mode  
MONO ON  
: Activate monaural mode to improve FM  
reception, but stereo effect will be lost.  
MONO OFF  
: Restore the stereo effect. (  
6)  
IF BAND  
Intermediate  
frequency band  
AUTO  
: Increases the tuner selectivity to reduce  
interference noises between adjacent  
stations. (Stereo effect may be lost.)  
: Subject to interference noises from adjacent  
stations, but sound quality will not be  
degraded and the stereo effect will remain.  
: Adjust the front and rear speaker output  
balance.  
WIDE  
FADER *8  
R06 – F06  
[ 00 ]  
L06 – R06  
[ 00 ]  
BALANCE *9  
: Adjust the left and right speaker output  
balance.  
LOUD  
Loudness  
LOUD ON  
: Boost low and high frequencies to produce a  
well-balanced sound at a low volume level.  
: Cancels.  
LOUD OFF  
AUX ADJUST *10 AUX ADJ 00 —  
Auxiliary adjust  
(For KD-R312/  
KD-R311)  
: Adjust the auxiliary input level to avoid the  
sudden increase of the output level when  
changing the source to external component  
connected to the AUX input jack on the  
control panel.  
AUX ADJ 05  
5
6
7
8
9
*
*
*
*
*
Only for FM Radio Data System stations.  
Depends on the amplifier gain control.  
Displayed only when the source is “FM.”  
If you are using a two-speaker system, set the fader level to “00.”  
For KD-R412/KD-R411/KD-R312/KD-R311: This adjustment will not affect the subwoofer output.  
*10 Displayed only when <AUX IN> is set to <AUX ON>.  
ENGLISH  
15  
EN10-17_KD-R412_003A_4.indd 15  
10/12/09 9:59:01 AM  
Category  
Menu item  
Selectable setting, [ Initial: Underlined  
]
VOL ADJUST  
Volume adjust  
(For KD-R412/  
KD-R411/KD-R35)  
VOL ADJ –05 — : Preset the volume adjustment level of  
VOL ADJ +05  
each source (except FM), compared to the  
FM volume level. The volume level will  
automatically increase or decrease when  
you change the source.  
[ VOL ADJ 00 ]  
• Before making an adjustment, select the  
source you want to adjust.  
• “VOL ADJ FIX” appears on the display if  
“FM” is selected as the source.  
L/O MODE *11  
Line output mode  
SUB.W  
: Select if the REAR LINE OUT terminals are  
used for connecting a subwoofer (through  
an external amplifier).  
REAR  
: Select if the REAR LINE OUT terminals are  
used for connecting the speakers (through  
an external amplifier).  
12  
SUB.W FREQ *11,  
Subwoofer cutoff  
frequency  
*
LOW  
MID  
: Frequencies lower than 72 Hz are sent to the  
subwoofer.  
: Frequencies lower than 111 Hz are sent to  
the subwoofer.  
HIGH  
: Frequencies lower than 157 Hz are sent to  
the subwoofer.  
11, 12  
SUB.W LEVEL  
*
*
SUB.W 00 —  
SUB.W 08  
: Adjust the subwoofer output level.  
Subwoofer level  
[ SUB.W 04 ]  
BEEP  
BEEP ON  
BEEP OFF  
MUTING 1/  
MUTING 2  
MUTING OFF  
: Activates the keypress tone.  
: Deactivates the keypress tone.  
: Select either one which mutes the sounds  
while using a mobile phone.  
: Cancels.  
TEL MUTING  
Telephone muting  
AMP GAIN*13  
Amplifier gain  
control  
LOW POWER : VOLUME 00 – VOLUME 30 (Select if the  
maximum power of each speaker is less than  
50 W to prevent damaging the speakers.)  
HIGH POWER : VOLUME 00 – VOLUME 50  
AM *14  
AM ON  
: Enable “AM” in source selection.  
: Disable “AM” in source selection.  
: Enable “AUX IN” in source selection.  
: Disable “AUX IN” in source selection.  
AM station  
AUX IN *15  
Auxiliary input  
AM OFF  
AUX ON  
AUX OFF  
*11 For KD-R412/KD-R411/KD-R312/KD-R311.  
*12 Displayed only when <L/O MODE> is set to <SUB.W>.  
*13 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the  
volume level is set higher than “VOLUME 30.”  
*14 Displayed only when any source other than “AM” is selected.  
*15 Displayed only when any source other than “AUX IN” is selected.  
16  
ENGLISH  
EN10-17_KD-R412_003A_4.indd 16  
10/12/09 9:59:01 AM  
More about this unit  
Basic operations  
Disc operations  
General  
Caution for DualDisc playback  
• If you turn off the power while listening to  
a track, playback will start from where it had  
been stopped previously next time you turn  
on the power.  
• If no operation is done for about 60 seconds  
after pressing MENU button, the operation will  
be canceled.  
• The Non-DVD side of a “DualDisc” does not  
comply with the “Compact Disc Digital Audio”  
standard. Therefore, the use of Non-DVD side  
of a DualDisc on this product may not be  
recommended.  
General  
• This unit has been designed to reproduce  
CDs/CD Texts, and CD-Rs (Recordable)/CD-  
RWs (Rewritable) in audio CD (CD-DA), MP3  
and WMA formats.  
Tuner operations  
Storing stations in memory  
• If you change the source while listening to a  
disc, playback stops. Next time you select “CD”  
as the playback source, playback will start  
from where it had been stopped previously.  
• When a disc is inserted upside down, “PLEASE”  
and “EJECT” appear alternately on the display.  
• During SSM search...  
–All previously stored stations are erased and  
the stations are stored anew.  
–When SSM is over, the station stored in the  
lowest preset number will be automatically  
tuned in.  
• When storing a station manually, the  
previously preset station is erased when a new  
station is stored in the same preset number.  
Press  
0
to eject the disc.  
• If the ejected disc is not removed within  
15 seconds, it is automatically inserted into  
the loading slot again to protect it from dust.  
• MP3 and WMA “tracks” (words “file” and “track”  
are used interchangeably) are recorded in  
“folders.”  
FM Radio Data System operations  
• Network-Tracking Reception requires two  
types of Radio Data System signals—PI  
(Programme Identification) and AF  
• While fast-forwarding or reversing on an MP3  
or WMA disc, you can only hear intermittent  
sounds.  
(Alternative Frequency) to work correctly.  
• If a Traffic Announcement is received by  
TA Standby Reception, the volume level  
automatically changes to the preset level (TA  
VOLUME) if the current level is lower than the  
preset level.  
• When Alternative Frequency Reception is  
activated (with AF selected), Network-Tracking  
Reception is also activated automatically.  
PTY codes: NEWS, AFFAIRS, INFO, SPORT,  
EDUCATE, DRAMA, CULTURE, SCIENCE,  
VARIED, POP M (music), ROCK M (music), EASY  
M (music), LIGHT M (music), CLASSICS, OTHER  
M (music), WEATHER, FINANCE, CHILDREN,  
SOCIAL, RELIGION, PHONE IN, TRAVEL,  
LEISURE, JAZZ, COUNTRY, NATION M (music),  
OLDIES, FOLK M (music), DOCUMENT  
Playing a CD-R or CD-RW  
• Use only “finalized” CD-Rs or CD-RWs.  
• This unit can only play back files of the same  
type as those detected first if a disc includes  
both audio CD (CD-DA) files and MP3/WMA  
files.  
• This unit can play back multi-session discs;  
however, unclosed sessions will be skipped  
while playing.  
ENGLISH  
17  
EN10-17_KD-R412_003A_4.indd 17  
10/12/09 9:59:01 AM  
• Some CD-Rs or CD-RWs may not play back on  
this unit because of their disc characteristics,  
or for the following reasons:  
–Discs are dirty or scratched.  
–Moisture condensation has occurred on the  
lens inside the unit.  
–The pickup lens inside the unit is dirty.  
–The files on the CD-R/CD-RW are written  
using the “Packet Write” method.  
–There are improper recording conditions  
(missing data, etc.) or media conditions  
(stained, scratched, warped, etc.).  
• CD-RWs may require a longer readout time  
since the reflectance of CD-RWs is lower than  
that of regular CDs.  
• Do not use the following CD-Rs or CD-RWs:  
–Discs with stickers, labels, or a protective seal  
stuck to the surface.  
–Discs on which labels can be directly printed  
by an ink jet printer.  
–Sampling frequency of MP3:  
32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)  
–Sampling frequency of WMA:  
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz  
–Disc format: ISO 9660 Level 1/Level 2,  
Romeo, Joliet, Windows extension  
• The maximum number of characters for  
file/folder names (includes 4 extension  
characters—<.mp3> or <.wma>): 12 — 128  
characters (depending on the media used,  
etc.).  
• This unit can recognize a total of 512 files, 255  
folders, and 8 hierarchical levels.  
• This unit can play back files recorded in VBR  
(variable bit rate).  
Files recorded in VBR have a discrepancy  
in the elapsed time display, and do not  
show the actual elapsed time. In particular,  
this difference becomes noticeable after  
performing the search function.  
• This unit cannot play back the following files:  
–MP3 files encoded in MP3i and MP3 PRO  
format.  
–MP3 files encoded in an inappropriate  
format.  
–MP3 files encoded with Layer 1/2.  
–WMA files encoded in lossless, professional,  
and voice format.  
–WMA files which are not based upon  
Windows Media ® Audio.  
–WMA files copy-protected with DRM.  
–Files which have data such as AIFF, ATRAC3,  
etc.  
Using these discs under high temperature  
or high humidity may cause malfunctions or  
damage to the unit.  
Playing an MP3/WMA disc  
• This unit can play back MP3/WMA files with  
the extension code <.mp3> or <.wma>  
(regardless of the letter case—upper/lower).  
• This unit can show the names of albums,  
artists (performer), and Tag (Version 1.0, 1.1,  
2.2, 2.3, or 2.4) for MP3 files and for WMA files.  
• This unit can display only one-byte characters.  
No other characters can be correctly  
displayed.  
• This unit can play back MP3/WMA files  
meeting the conditions below:  
–Bit rate:  
• The search function works but search speed is  
not constant.  
MP3: 32 kbps — 320 kbps  
WMA: 32 kbps — 192 kbps  
18  
ENGLISH  
EN18-25_KD-R412_003A_f.indd 18  
10/15/09 12:15:29 PM  
• USB devices equipped with special functions  
such as data security functions cannot be  
used with the unit.  
• Do not use a USB device with 2 or more  
partitions.  
• This unit may not recognized a USB device  
connected through a USB card reader.  
• This unit may not play back files in a USB  
device properly when using a USB extension  
cord.  
• This unit cannot play back the following files:  
–MP3 files encoded with MP3i and MP3 PRO  
format.  
Playing MP3/WMA tracks from a  
USB device (for KD-R412/KD-R411/  
KD-R35)  
• While playing from a USB device, the playback  
order may differ from other players.  
• This unit may be unable to play back some  
USB devices or some files due to their  
characteristics or recording conditions.  
• Depending on the shape of the USB devices  
and connection ports, some USB devices may  
not be attached properly or the connection  
might be loose.  
• Connect one USB mass storage class device to  
the unit at a time. Do not use a USB hub.  
• If the connected USB device does not have  
the correct files, “CANNOT PLAY” appears.  
• This unit can show Tag (Version 1.0, 1.1, 2.2,  
2.3, or 2.4) for MP3 files and for WMA files.  
• This unit can play back MP3/WMA files  
meeting the conditions below:  
–MP3 files encoded in an inappropriate  
format.  
–MP3 files encoded with Layer 1/2.  
–WMA files encoded in lossless, professional,  
and voice format.  
–WMA files not based on Windows Media®  
Audio.  
–Bit rate of MP3/WMA: 32 kbps — 320 kbps  
–Sampling frequency of MP3:  
32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)  
–Sampling frequency of WMA:  
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz  
• This unit can play back MP3 files recorded in  
VBR (variable bit rate).  
• The maximum number of characters for:  
–Folder names : 32 characters  
–File names : 32 characters  
–MP3 Tag : 64 characters  
–WMA Tag : 32 characters  
• This unit can recognize a total of 5 000 files,  
255 folders (255 files per folder including  
folder without unsupported files), and of 8  
hierarchies.  
Preset sound mode  
Sound element  
Frequency  
Tone  
Level  
Q
Q1.0  
Q1.25  
Q1.5  
BASS  
60 Hz –06 to +06  
80 Hz  
100 Hz  
200 Hz  
Q2.0  
MIDDLE  
TREBLE  
0.5 kHz –06 to +06 Q0.75  
1.0 kHz  
1.5 kHz  
2.5 kHz  
Q1.0  
Q1.25  
10.0 kHz –06 to +06  
12.5 kHz  
Q FIX  
15.0 kHz  
17.5 kHz  
• This unit does not support SD card reader.  
• This unit cannot recognize a USB device  
whose rating is other than 5 V and exceeds  
500 mA.  
ENGLISH  
19  
EN18-25_KD-R412_003A_5.indd 19  
10/13/09 1:54:42 PM  
Maintenance  
To keep discs clean  
How to clean the connectors  
A dirty disc may not play  
Frequent detachment will deteriorate the  
connectors.  
To minimize this possibility, periodically wipe  
the connectors with a cotton swab or cloth  
moistened with alcohol, being careful not to  
damage the connectors.  
correctly. If a disc does become  
dirty, wipe it with a soft cloth  
in a straight line from center to  
edge.  
• Do not use any solvents (for example,  
conventional record cleaner, spray, thinner,  
benzine, etc.) to clean discs.  
To play new discs  
Connectors  
New discs may have some  
rough spots around the inner  
and outer edges. If such a disc  
is used, this unit may reject the  
disc.  
Moisture condensation  
Moisture may condense on the lens inside the  
unit in the following cases:  
• After starting the heater in the car.  
• If it becomes very humid inside the car.  
Should this occur, the unit may malfunction.  
In this case, eject the disc and leave the unit  
turned on for a few hours until the moisture  
has evaporated.  
To remove these rough spots, rub the edges  
with a pencil or ball-point pen, etc.  
Do not use the following discs:  
Single CD (8 cm disc)  
Warped disc  
How to handle discs  
When removing a disc  
Center holder  
Sticker and sticker  
residue  
from its case, press down  
the center holder of the case  
and lift the disc out, holding  
Stick-on label  
it by the edges.  
• Always hold the disc by the edges. Do not  
touch its recording surface.  
When storing a disc in its case, gently insert  
the disc around the center holder (with the  
printed surface facing up).  
C-thru Disc  
(semitransparent  
disc)  
Unusual shape  
• Make sure to store discs in cases after use.  
Transparent or  
semitransparent  
parts on its recording  
area  
20  
ENGLISH  
EN18-25_KD-R412_003A_4.indd 20  
10/12/09 9:59:27 AM  
Troubleshooting  
Symptom  
Remedy/Cause  
Sound cannot be heard from the  
speakers.  
• Adjust the volume to the optimum level.  
• Make sure the unit is not muted/paused (  
• Check the cords and connections.  
5).  
“PROTECT” appears on the display Check to be sure the terminals of the speaker leads  
and no operations can be done.  
are covered with insulating tape properly, then  
reset the unit ( 3).  
If “PROTECT” does not disappear, consult your JVC  
IN-CAR ENTERTAINMENT dealer or a company  
supplying kits.  
The unit does not work at all.  
“AUX” cannot be selected.  
Reset the unit. (  
3)  
Check the <SRC SELECT>  
16)  
=
<AUX IN> setting.  
(
SSM automatic presetting does  
not work.  
Store stations manually.  
Static noise while listening to the  
radio.  
Connect the aerial firmly.  
“AM” cannot be selected.  
Check the <SRC SELECT>  
Insert the disc correctly.  
=
<AM> setting. (  
16)  
Disc cannot be played back.  
• CD-R/CD-RW cannot be played  
back.  
• Tracks on the CD-R/CD-RW  
cannot be skipped.  
• Insert a finalized CD-R/CD-RW.  
• Finalize the CD-R/CD-RW with the component  
which you used for recording.  
Disc can neither be played back  
nor ejected.  
• Unlock the disc. (  
• Eject the disc forcibly. (  
8)  
3)  
Disc sound is sometimes  
interrupted.  
• Stop playback while driving on rough roads.  
• Change the disc.  
• Check the cords and connections.  
“NO DISC” appears on the display.  
Insert a playable disc into the loading slot.  
“PLEASE” and “EJECT“ appear  
alternately on the display.  
Press 0, then insert a disc correctly.  
ENGLISH  
21  
EN18-25_KD-R412_003A_4.indd 21  
10/12/09 9:59:27 AM  
Symptom  
Remedy/Cause  
Disc cannot be played back.  
• Use a disc with MP3/WMA tracks recorded in a format  
compliant with ISO 9660 Level 1, Level 2, Romeo, or  
Joliet.  
• Add the extension code <.mp3> or <.wma> to the  
file names.  
Noise is generated.  
Skip to another track or change the disc. (Do not add  
the extension code <.mp3> or <.wma> to non-MP3 or  
WMA tracks.)  
A longer readout time is  
required (“READING” keeps  
flashing on the display).  
Do not use too many hierarchical levels and folders.  
Tracks do not play back in the  
order you have intended them  
to play.  
The playback order is determined when the files are  
recorded.  
For KD-R412/KD-R411/KD-R35:  
Selected folder is an empty folder *. Select another  
“NO FILE” appears on the display. folder that contains MP3/WMA tracks.  
* Folder that is physically empty or folder that contains  
data but does not contain valid MP3/WMA track.  
“NOT SUPPORT” appears on the Skip to the next track encoded in an appropriate  
display and track skips.  
format or to the next non-copy-protected WMA track.  
The elapsed playing time is not This sometimes occurs during playback. This is caused  
correct.  
by how the tracks are recorded on the disc.  
The correct characters are not  
displayed (e.g. album name).  
This unit can only display letters (upper case), numbers,  
and a limited number of symbols.  
22  
ENGLISH  
EN18-25_KD-R412_003A_f.indd 22  
10/16/09 5:48:38 PM  
Symptom  
Remedy/Cause  
Noise is generated.  
The track played back is not an MP3/WMA track. Skip to  
another file. (Do not add the extension code <.mp3> or  
<.wma> to non-MP3 or WMA tracks.)  
“READING” keeps flashing on  
the display.  
• Readout time varies depending on the USB device.  
• Do not use too many hierarchy or folders.  
• Turn off the power then on again.  
• Reattach the USB device again.  
“NO FILE” appears on the  
display.  
Selected folder is an empty folder*. Select another  
folder that contains MP3/WMA tracks.  
* Folder that is physically empty or folder that contains  
data but does not contain valid MP3/WMA track.  
“NOT SUPPORT” appears on the Skip to the next track encoded in an appropriate format  
display and track skips.  
or to the next non-copy-protected WMA track.  
Tracks/folders are not played  
back in the order you have  
intended.  
The playback order is determined by the write-in time  
stamp. The first track/folder written into the USB device  
will be the first track/folder for playback.  
• “CANNOT PLAY” flashes on  
the display.  
• Attach a USB device that contains tracks encoded in  
an appropriate format.  
• “NO USB” appears on the  
display.  
• Reattach the USB device again.  
• The unit cannot detect the  
USB device.  
The correct characters are not  
displayed (e.g. album name).  
This unit can only display letters (upper case), numbers,  
and a limited number of symbols.  
While playing a track, sound is  
sometimes interrupted.  
The MP3/WMA tracks have not been properly copied  
into the USB device.  
Copy MP3/WMA tracks again into the USB device, and  
try again.  
JVC bears no responsibility for any loss of the data in the USB mass storage class device  
while using this System.  
ENGLISH  
23  
EN18-25_KD-R412_003A_4.indd 23  
10/12/09 9:59:27 AM  
Specifications  
Maximum Power Output:  
Front/  
Rear:  
50 W per channel  
Continuous Power Output (RMS):  
Front/  
Rear:  
19 W per channel into 4 Ω, 40 Hz to  
20 000 Hz at no more than 0.8% total  
harmonic distortion.  
Load Impedance:  
4 Ω (4 Ω to 8 Ω allowance)  
Tone Control Range:  
Bass:  
12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)  
Q1.0, Q1.25, Q1.5, Q2.0  
Middle:  
Treble:  
12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz)  
Q0.75, Q1.0, Q1.25  
12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,  
17.5 kHz)  
Q (Fixed)  
Frequency Response:  
Signal-to-Noise Ratio:  
Line-Out Level/Impedance:  
40 Hz to 20 000 Hz  
70 dB  
Except  
2.5 V/20 kΩ load (full scale)  
KD-R35:  
Subwoofer-Out Level/Impedance:  
Except  
2.5 V/20 kΩ load (full scale)  
KD-R35:  
Output Impedance:  
Other Terminal:  
1 kΩ  
• AUX (auxiliary) input jack, Aerial input  
• For KD-R412/KD-R411: Steering wheel remote  
input, USB input Jack  
• For KD-R35: USB input Jack  
Frequency Range:  
FM Tuner:  
FM:  
AM:  
87.5 MHz to 108.0 MHz  
MW:  
LW:  
522 kHz to 1 620 kHz  
144 kHz to 279 kHz  
9.3 dBf (0.8 μV/75 Ω)  
16.3 dBf (1.8 μV/75 Ω)  
Usable Sensitivity:  
50 dB  
Quieting Sensitivity:  
Alternate Channel  
65 dB  
Selectivity (400 kHz):  
Frequency Response:  
Stereo Separation:  
Sensitivity:  
40 Hz to 15 000 Hz  
40 dB  
MW Tuner:  
LW Tuner:  
20 μV  
Selectivity:  
40 dB  
Sensitivity:  
50 μV  
24  
ENGLISH  
EN18-25_KD-R412_003A_4.indd 24  
10/12/09 9:59:27 AM  
Type:  
Compact disc player  
Signal Detection System:  
Non-contact optical pickup  
(semiconductor laser)  
Number of Channels:  
Frequency Response:  
Dynamic Range:  
2 channels (stereo)  
5 Hz to 20 000 Hz  
93 dB  
Signal-to-Noise Ratio:  
Wow and Flutter:  
98 dB  
Less than measurable limit  
MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max. Bit Rate: 320 kbps  
WMA (Windows Media® Audio) Decoding Format: Max. Bit Rate: 192 kbps  
USB Standard:  
USB 1.1, USB 2.0  
Max. 12 Mbps  
Mass storage class  
FAT 32/16/12  
MP3/WMA  
Data Transfer Rate (Full Speed):  
Compatible Device:  
Compatible File System:  
Playable Audio Format:  
Max. Current:  
DC 5 V  
500 mA  
Power Requirement:  
Operating Voltage:  
DC 14.4 V (11 V to 16 V allowance)  
Negative ground  
Grounding System:  
Allowable Operating Temperature:  
Dimensions (W × H × D): Installation Size:  
0°C to +40°C  
182 mm × 52 mm × 160 mm  
188 mm × 58 mm × 13 mm  
1.3 kg (excluding accessories)  
(approx.)  
Panel Size:  
Mass:  
Design and specifications are subject to change without notice.  
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries.  
ENGLISH  
25  
EN18-25_KD-R412_003A_f.indd 25  
10/15/09 4:13:01 PM  

Alpine 68P21523Y62 B User Manual
Blaupunkt MODENA MP54 7 644 262 310 User Manual
Bunn Beverage Dispenser H5E User Manual
Carson SA 500 11 14V User Manual
Crown Boiler BSI276 User Manual
Crown Boiler CWI345 User Manual
Dual ILLUMINITE TS69 User Manual
Hamilton Beach 840116400 User Manual
JBL PROCOUSTICS MS 2 User Manual
JVC GR SX140A User Manual