Blaupunkt MODENA MP54 7 644 262 310 User Manual

Radio / CD / MP3  
Modena MP54  
Sevilla MP54  
7 644 260 310  
7 644 262 310  
Operating instructions  
1
2
3
4
5
6
7
8
16  
15  
14  
13  
12  
11  
10  
9
17  
3
CONTROLS  
1
2
3
4
Button to switch the device on/  
off and operate the volume mute  
feature.  
9
:
MENU button to open the basic  
settings menu.  
OK button to confirm menu en-  
tries and activate the scan func-  
tion.  
button for opening the de-  
tachable control panel (flip-re-  
lease panel).  
;
<
=
Keys 4 - 6  
RDS button to switch the RDS  
function on/off (Radio Data Sys-  
tem).  
Display  
TRAF button to switch traffic in-  
formation standby on/off.  
BND button (Band) to switch to  
radio mode,  
to select the FM memory banks  
and the MW and LW wave-  
bands.  
>
AUDIO button to adjust the  
bass, treble, balance and fader.  
For selecting an equalizer pre-  
set.  
?
@
X-BASS button to activate/deac-  
tivate and adjust the X-BASS  
feature.  
TS to start the Travelstore func-  
tion.  
5
6
7
8
Volume control  
Keys 1 - 3  
SRC button to switch between  
the CD/MP3, CD changer (if  
connected) and AUX sources.  
Arrow buttons  
DIS to change the display con-  
tent.  
A
button to eject the CD from  
the device.  
35  
CONTENTS  
Notes and accessories ............. 37 MP3 mode ................................. 53  
Preparing an MP3-CD ...................... 53  
Switching to MP3 mode ................... 55  
Selecting a directory......................... 55  
Detachable control panel.......... 38  
Switching on/off ....................... 39  
Selecting tracks/files ........................ 55  
Fast searching ................................. 55  
Random track play (MIX) .................. 55  
Scanning tracks (SCAN) .................. 56  
Repeating individual tracks or  
whole directories (REPEAT) ............. 56  
Pausing playback (PAUSE)............... 56  
Configuring the display ..................... 56  
Adjusting the volume ................ 40  
Radio mode............................... 43  
Adjusting the tuner settings .............. 43  
Switching to radio mode ................... 43  
Convenient RDS functions ............... 43  
Selecting the waveband / memory  
bank................................................. 44  
Tuning into a station.......................... 44  
Setting the sensitivity of station  
seek tuning....................................... 45  
Storing stations ................................ 45  
Storing stations automatically  
(Travelstore) ..................................... 45  
Listening to stored stations ............... 46  
Scanning receivable stations (SCAN) . 46  
Setting the scanning time ................. 46  
Programme type (PTY) ..................... 46  
Optimising radio reception................ 48  
Configuring the display ..................... 48  
CD-changer mode .................... 58  
Switching to CD-changer mode........ 58  
Selecting CDs .................................. 58  
Selecting tracks ............................... 58  
Fast searching (audible) ................... 58  
Changing the display ........................ 58  
Repeating individual tracks or  
whole CDs (REPEAT)....................... 58  
Random track play (MIX) .................. 59  
Scanning all tracks on all CDs  
(SCAN) ............................................ 59  
Pausing playback (PAUSE)............... 59  
Traffic information..................... 48  
CLOCK - Time ........................... 60  
Sound........................................ 61  
X-BASS ..................................... 62  
Configuring the level display .... 63  
Adjusting the brightness  
(dimmer) ................................... 63  
Adjusting the viewing angle ...... 63  
External audio sources ............. 64  
TMC for dynamic navigation  
systems ..................................... 64  
Specifications ........................... 65  
Installation instructions........... 283  
CD mode ................................... 49  
Switching to CD mode ..................... 49  
Selecting tracks ............................... 50  
Fast track selection .......................... 50  
Fast searching (audible) ................... 50  
Random track play (MIX) .................. 50  
Scanning tracks (SCAN) .................. 50  
Repeating tracks (REPEAT) .............. 51  
Pausing playback (PAUSE)............... 51  
Changing the display ........................ 51  
Displaying CD text............................ 51  
Naming CDs .................................... 52  
Traffic announcements in CD mode .. 53  
Ejecting a CD................................... 53  
36  
NOTES AND ACCESSORIES  
Thank you for choosing a Blaupunkt  
product. We hope you enjoy using this  
new piece of equipment.  
Installation  
If you want to install your car sound sys-  
tem yourself, please read the installa-  
tion and connection instructions that  
follow these operating instructions.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
Accessories  
Only use accessories approved by Blau-  
punkt.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any Remote control  
questions on how to operate the device,  
please contact your dealer or the tele-  
phone hotline for your country. You will  
find the telephone number printed at the  
back of this booklet.  
The optional RC08 or RC10 remote  
control allows you to access the most  
important functions of your car sound  
system safely and conveniently from  
your steering wheel.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
You cannot switch the device on/off us-  
ing the remote control.  
Amplifiers  
You can use all Blaupunkt and Velocity  
amplifiers.  
Blaupunkt GmbH, Hotline CM/PSS,  
Robert Bosch Str. 200,  
D-31139 Hildesheim  
Germany  
CD changers  
You can connect the following Blaupunkt  
CD changers:  
CDC A 08, IDC A 09 and CDC A 03.  
Road safety  
Compact Drive MP3  
Road safety has absolute prior-  
ity. Only operate your car sound sys-  
tem if the road and traffic conditions  
allow you to do so. Familiarise your-  
self with the device before setting off  
on your journey.  
You should always be able to hear  
police, fire and ambulance sirens  
from afar. For this reason, listen to  
your car sound system at a reason-  
able volume level during your jour-  
ney.  
You can connect the Compact Drive MP3  
instead of a CD-changer in order to play  
MP3 music tracks. If you decide to connect  
a Compact Drive MP3, you will first need to  
use a computer to store the MP3 music  
tracks on the Microdrive™ hard disk that is  
inside the Compact Drive MP3. Then, when  
the Compact Drive MP3 is connected to the  
car sound system, you can play the tracks  
like normal CD music tracks. You can oper-  
ate the Compact Drive MP3 in the same way  
as a CD changer. Most of the CD-changer  
functions can also be used with the Com-  
pact Drive MP3.  
37  
DETACHABLE CONTROL PANEL  
Detachable control panel  
(flip-release panel)  
Theft protection  
The device is equipped with a detacha-  
ble control panel (flip-release panel) as  
a way of protecting your equipment  
against theft. The device is worthless  
to a thief without this control panel.  
Note:  
The device will switch off after a  
particular time period configured by  
you. For further details, read the  
section entitled “OFF TIMER” in  
this chapter.  
Protect your device against theft by tak-  
ing the control panel with you whenev-  
er you leave your vehicle. Do not leave  
the control panel inside your vehicle -  
not even in a hiding place.  
All the current settings are saved.  
Any CD already inserted in the de-  
The control panel has been designed  
to be easy to use.  
vice remains there.  
Attaching the control panel  
Note:  
Never drop the control panel.  
Hold the control panel at approxi-  
Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
mately right angles to the device.  
Slide the control panel into the de-  
vice’s guides that are positioned on  
the left and right at the lower edge  
of the housing. Push the control  
panel carefully into the bracket until  
it clicks into place.  
Avoid direct skin contact with the  
control panel’s electrical contacts. If  
necessary, clean the contacts with  
a lint-free cloth and some alcohol.  
Detaching the control panel  
Flip up the control panel and care-  
fully press it into the device until it  
clicks into place.  
Press the  
button 2.  
The control panel opens out towards  
you.  
Hold the control panel by its right  
side and then pull the control panel  
straight out of the bracket.  
2.  
1.  
38  
CONTROL PANEL  
SWITCHING ON/OFF  
Note:  
Switching on/off  
There are various ways of switching the  
device on/off:  
When attaching the control panel,  
make sure you do not press the  
display.  
Switching the device on/off using  
the vehicle ignition  
If the device was still switched on when  
you removed the control panel, it will  
automatically switch on with the last  
settings activated (i.e. radio, CD/MP3,  
CD changer or AUX) when the panel is  
replaced.  
If the device is correctly connected to  
the vehicle’s ignition and you did not  
switch it off by pressing button 1, the  
device will switch on/off simultaneously  
with the ignition.  
Off timer  
Switching the device on/off using  
the detachable control panel  
After you detach the control panel, the  
device will switch off after a preset time  
period. You can set this time to between  
0 and 30 seconds.  
Detach the control panel.  
The device switches off.  
Press the MENU button 9.  
Note:  
Press the or button 7 repeat-  
edly until “OFF TIMER” appears in  
the display.  
The device will switch off after a  
preset time period. For further de-  
tails, read the section entitled “Off  
timer”.  
Adjust the time using the  
but-  
tons 7.  
Attach the control panel again.  
When you have finished making your  
changes,  
The device switches on. The last set-  
ting (radio, CD/MP3, CD changer or  
AUX) will be reactivated.  
press the MENU button 9 twice or  
the OK button : twice.  
Switching on/off using button 1  
Note:  
To switch on the device, press but-  
If you set the off-timer to 0 sec-  
onds, the device will switch off im-  
mediately as soon as you open the  
control panel.  
ton 1.  
To switch off the device, press and  
hold down button 1 for longer  
than two seconds.  
The device switches off.  
Note:  
To protect the vehicle battery, the  
device will switch off automatically  
after one hour if the ignition is off.  
39  
SWITCHING ON/OFF  
ADJUSTING THE VOLUME  
Adjusting the volume  
Switching on by inserting a CD  
If the device is switched off and there is  
no CD present in the drive,  
You can adjust the volume in steps from  
0 (off) to 66 (maximum).  
press the  
button 2.  
To increase the volume,  
The flip-release panel opens.  
turn the volume control 5 clock-  
Gently insert the CD with its printed  
side uppermost into the drive until  
you feel some resistance.  
wise.  
To decrease the volume,  
turn the volume control 5 anti-  
The drive draws in the CD automatical-  
ly.  
clockwise.  
Setting the power-on volume  
You can set the device’s default power-  
on volume.  
You must not hinder or assist the drive  
as it draws in the CD.  
Gently close the control panel  
whilst exerting a little pressure until  
you feel it click into place.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “ON VOLUME” appears  
in the display.  
The device switches on and starts play-  
ing the CD.  
Note:  
Adjust the power-on volume using  
If the ignition was switched off be-  
fore you inserted the CD, you will  
first have to switch on the device  
by pressing button 1 in order to  
start playing the CD.  
the  
buttons 7.  
To help you adjust the setting more eas-  
ily, the device will increase or decrease  
the volume as you make your changes.  
If you change the setting to “LAST VOL”,  
the volume when the device switches  
on will be the same as the volume level  
that was set the last time you switched  
the device off.  
Note:  
To protect your hearing, the power-  
on volume is limited to a value of  
“38”. If the volume level was higher  
than this when the device was last  
switched off and the “LAST VOL”  
setting is activated, the system will  
reset the volume to “38” when you  
switch the device on again.  
40  
ADJUSTING THE VOLUME  
When you have finished making your  
changes,  
Telephone audio / navigation audio  
If your car sound system is connected  
to a mobile telephone or a navigation  
system, the sound system’s volume will  
be muted as soon as you “pick up” the  
phone or as soon as a navigation an-  
nouncement is made. You will then hear  
the caller or navigation announcement  
over the car sound system’s loudspeak-  
ers. In order for this feature to work, the  
mobile telephone or navigation system  
must be connected to the car sound  
system as described in the installation  
instructions.  
press the MENU button 9 twice or  
the OK button : twice.  
Instantaneously decreasing the  
volume (mute)  
You can instantaneously decrease the  
volume (mute) to a level preset by you.  
Briefly press button 1.  
“MUTE” appears in the display.  
Cancelling mute  
To return to your previously set volume  
level,  
You will need a cable for this with the  
following Blaupunkt number: 7 607 001  
503.  
briefly press button 1 again.  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car sound system.  
Setting the mute level  
You can set the device’s mute volume  
level.  
If the sound system receives a traffic  
announcement during a telephone call  
or whilst a navigation announcement is  
being made, you will only be able to hear  
the traffic announcement after the call  
or navigation announcement is finished  
(in so far as the traffic announcement is  
still being broadcast). The traffic an-  
nouncement is not recorded!  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “MUTE LEVEL” appears  
in the display.  
Adjust the mute level using the  
buttons 7.  
When you have finished making your  
changes,  
If, during a traffic announcement, a tel-  
ephone call arrives or the navigation  
system wants to output a spoken in-  
struction, the traffic announcement will  
be cancelled and the telephone call/  
voice output can be heard.  
press the MENU button 9 twice or  
the OK button : twice.  
You can set the volume level at which  
telephone calls or navigation announce-  
ments will first be heard.  
Press the MENU button 9.  
41  
ADJUSTING THE VOLUME  
Press the or button 7 repeat-  
edly until “TEL/NAVI VOL” appears  
in the display.  
Automatic sound  
This feature automatically adjusts the  
volume of the car sound system to suit  
the speed at which the vehicle is travel-  
ling. In order for this to work, your car  
sound system must be connected as  
described in the installation instructions.  
Set your preferred volume level us-  
ing the  
buttons 7.  
When you have finished making your  
changes,  
You can adjust the automatic volume  
boost feature in six steps from (0 to 5).  
press the MENU button 9 twice or  
the OK button : twice.  
Press the MENU button 9.  
Note:  
Press the button 7 repeatedly  
until “AUTO SOUND” appears in  
the display.  
You can use the volume control 5  
to adjust the volume of telephone  
calls and navigation announce-  
ments whilst you are listening to  
them.  
Set the volume adjustment level  
using the  
buttons 7.  
When you have finished making your  
changes,  
Setting the volume of the  
confirmation beep  
press the MENU button 9 twice or  
The system will output a confirmation  
beep for some functions if you keep a  
button pressed down for longer than two  
seconds, for instance, when assigning  
a radio station to a station preset but-  
ton. You can adjust the volume of this  
beep.  
the OK button : twice.  
Note:  
The optimum setting for the speed-  
dependent volume adjustment fea-  
ture depends on how noise levels  
develop in your particular vehicle.  
You will need to test various set-  
tings in order to find out which is  
best suited to your vehicle.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “BEEP” appears in the  
display.  
Adjust the volume using the  
buttons 7. “OFF” means that the  
beep is deactivated, “7” means that  
the maximum beep volume is set.  
When you have finished making your  
changes,  
press the MENU button 9 or the  
OK button :.  
42  
RADIO MODE  
selected a setting other than “EU-  
ROPE”, the relevant buttons, dis-  
plays and menus will not work or  
will not be displayed.  
Radio mode  
This device is equipped with an RDS  
radio receiver. Many of the receivable  
FM stations broadcast a signal that not  
only carries the programme but also  
additional information such as the sta-  
tion name and programme type (PTY).  
Switching to radio mode  
If you are in CD/MP3, CD changer or  
AUX mode,  
The station name appears in the dis-  
play as soon as the tuner receives it.  
press the BNDTS button 4.  
or  
Adjusting the tuner settings  
press the SRC button @ repeated-  
ly until the memory bank (e.g.  
To ensure that the tuner works proper-  
ly, the device must be configured for the  
region in which you are using it. You can  
choose between Europe (EUROPE),  
United States (AMERICA), SouthAmer-  
ica (S-AMERICA) and Thailand (THAI).  
By default, the tuner is set to the region  
in which the device was sold. If you ex-  
perience problems with radio reception,  
please check this setting.  
“FM1”) appears in the display.  
Convenient RDS functions  
The convenient RDS functions AF (Al-  
ternative Frequency) and REGIONAL  
extend your radio’s range of functions.  
AF: If you activate this RDS func-  
tion, the radio automatically tunes  
into the best receivable frequency  
for the station that is currently set.  
Press the MENU button 9.  
Press the button 7 repeatedly  
until “TUNER AREA” appears in  
the display.  
REGIONAL: At certain times, some  
radio stations divide their pro-  
gramme into regional programmes  
providing different content. You can  
use the REGIONAL function to pre-  
vent the car radio from switching to  
alternative frequencies that are  
transmitting different programme  
content.  
Press the or button 7 to  
switch between “EUROPE”,  
“AMERICA”, “THAI” and “S-AMER-  
ICA”.  
Press the MENU button 9 twice  
or the OK button : twice.  
Note:  
Note:  
REGIONAL must be activated/de-  
activated separately in the menu.  
The explanations provided for the  
regional (REGIONAL), program  
type (PTY) and traffic information  
functions all relate to the “EU-  
ROPE” tuner setting. If you have  
43  
RADIO MODE  
Switching REGIONAL on/off  
Tuning into a station  
Press the MENU button 9.  
There are various ways of tuning into a  
station.  
Press the or button 7 repeat-  
edly until “REGIONAL” appears in  
the display. “OFF” or “ON” is dis-  
played alongside “REGIONAL”.  
Automatic station seek tuning  
Press the or button 7.  
The radio tunes into the next receiva-  
ble station.  
To switch REGIONAL on/off, press  
the or button 7.  
Tuning into stations manually  
Press the MENU button 9 or the  
You can also tune into stations manual-  
ly.  
OK button :.  
Switching the RDS function on/off  
Note:  
If you want to use the RDS functions  
(AF and REGIONAL),  
You can only tune into stations  
manually if the RDS function is de-  
activated.  
press the RDS button 3.  
The RDS functions are active when  
RDS lights up in the display.  
Press the or button 7.  
Browsing through broadcasting  
networks (only FM)  
Selecting the waveband /  
memory bank  
If a radio station provides several pro-  
grammes, you have the option of brows-  
ing through its so-called “broadcasting  
network”.  
This device can receive programmes  
broadcast over the FM frequency range  
as well as the MW and LW (AM) wave-  
bands. There are three memory banks  
available for the FM waveband (FM1,  
FM2 and FMT) and one for each of the  
MW and LW wavebands.  
Note:  
The RDS function must be activat-  
ed before you can use this feature.  
Press the or button 7 to  
switch to the next station on the  
broadcasting network.  
Six stations can be stored in each mem-  
ory bank.  
To switch between the FM memory  
banks (FM1, FM2 and FMT) and the  
MW and LW wavebands,  
Note:  
When using this feature, you will  
only be able to switch to stations  
that you have received once before  
already. To receive the stations,  
use the Scan or Travelstore func-  
tion.  
briefly press the BNDTS button  
4.  
44  
RADIO MODE  
Setting the sensitivity of station  
seek tuning  
You can choose whether the radio  
should only tune into stations providing  
good reception or whether it can also  
tune into those with a weak reception.  
Storing stations  
Storing stations manually  
Select the memory bank (i.e. FM1,  
FM2, FMT) that you want or one of  
the wavebands (MW or LW).  
Tune into the station that you want.  
Press the MENU button 9.  
Press and hold down one of the  
station buttons 1 - 3 6 or 4 - 6 ;  
for longer than two seconds to as-  
sign the station to that button.  
Press the or button 7 repeat-  
edly until “SENS” appears in the  
display.  
Press the button 7.  
Storing stations automatically  
(Travelstore)  
You can automatically store the six sta-  
tions providing the best reception in the  
region (only FM). The stations are stored  
in the FMT memory bank.  
The display shows the currently set sen-  
sitivity level. “SENS HI6” means that the  
tuner is set to the highest sensitivity  
setting. “SENS LO1” means it is set to  
the lowest sensitivity setting.  
Set the sensitivity level that you  
want using the  
buttons 7.  
Note:  
Any stations that were previously  
stored in this memory bank are de-  
leted in the process.  
When you have finished making your  
changes,  
press the MENU button 9 or the  
Press and hold down the BND•TS  
button 4 for longer than two sec-  
onds.  
OK button :.  
Note:  
You can set different sensitivity lev-  
els for FM and MW or LW (AM).  
The storing procedure begins. “FM T-  
STORE” appears in the display. After  
the process has completed, the radio  
will play the station that is stored in  
memory location 1 of the FMT memory  
bank.  
45  
RADIO MODE  
When you have finished making your  
changes,  
Listening to stored stations  
Select the memory bank or wave-  
press the MENU button 9 twice or  
band.  
the OK button : twice.  
Press the station button 1 - 3 6 or  
4 - 6 ; that the station you want  
to listen to is assigned to.  
Note:  
The scanning time that you set is  
also applied by the system to scan-  
ning carried out in CD/MP3 and  
CD-changer mode.  
Scanning receivable stations  
(SCAN)  
You can use the scan function to briefly  
play all the receivable stations. You can  
set the scanning time in the menu to  
between 5 and 30 seconds.  
Programme type (PTY)  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting. Your car radio can  
receive and display this information.  
Starting SCAN  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds.  
For example, the programme types can  
be:  
Scanning begins. “SCAN” appears  
briefly in the display followed by a flash-  
ing display of the current station name  
or frequency.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
You can use the PTY function to select  
stations of a particular programme type.  
Cancelling SCAN and continuing  
listening to a station  
PTY-EON  
Press the OK button :.  
Scanning stops and the radio continues  
playing the station that it tuned into last.  
If you specify the programme type and  
start seek tuning, the radio will switch  
from the current station to a station of  
the selected programme type.  
Setting the scanning time  
Note:  
Press the MENU button 9.  
If the tuner does not find a station  
that corresponds to the selected  
programme type, you will hear a  
beep and “NO PTY” appears briefly  
in the display. The radio will then  
retune to the station that it received  
last.  
Press the or button 7 repeat-  
edly until “SCAN TIME” appears in  
the display.  
Set the scanning time that you  
want using the  
buttons 7.  
46  
RADIO MODE  
If the tuned radio station or another When you have finished making your  
station on the broadcasting net-  
work broadcasts your selected pro-  
gramme type at a later point in  
time, the radio will automatically  
changes,  
press the MENU button 9 twice or  
the OK button : twice.  
switch from the currently tuned sta- Selecting a programme type and  
tion or from CD/MP3 mode or CD-  
changer mode to the station whose  
programme type matches the one  
you selected.  
starting seek tuning  
Press the or button 7.  
The current programme type appears  
in the display.  
Switching PTY on/off  
If you want to select another pro-  
gramme type, you can do so by  
pressing the or button 7  
whilst this display is visible.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “PTY ON” or “PTY OFF”  
appears in the display.  
Or  
Press the or button 7 to  
Press one of the buttons 1 - 3 6  
or 4 - 6 ; to select a programme  
type that is assigned to one of  
these buttons.  
switch PTY ON or OFF.  
If PTY is switched on, PTY lights up in  
the display.  
The selected programme type appears  
briefly in the display.  
Press the MENU button 9 or the  
OK button :.  
Press the or button 7 to start  
Selecting the PTY language  
seek tuning.  
You can select the language in which  
the programme types are displayed.  
The following are available: “DEUT-  
SCH”, “ENGLISH” and “FRANÇAIS”.  
The radio will then tune into the next  
station that it finds that corresponds to  
your selected programme type.  
Assigning a programme type to a  
station button  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “PTY LANG” appears in  
the display.  
Select a programme type using the  
or button 7.  
Press and hold down the station  
button 1 - 3 6 or 4 - 6 ; that you  
want for longer than two seconds.  
Set your preferred language using  
the  
buttons 7.  
The programme type will then be as-  
signed to the selected button 1 - 3 6  
or 4 - 6 ;.  
47  
RADIO MODE  
TRAFFIC INFORMATION  
Traffic information  
Optimising radio reception  
Your device is equipped with an RDS-  
EON receiver. EON stands for En-  
hanced Other Network.  
Treble reduction feature during  
interference (HICUT)  
The HICUT function improves reception  
during poor radio reception (only FM).  
If interference occurs, the system auto-  
matically reduces the treble thus reduc-  
ing the interference level.  
Whenever a traffic announcement (TA)  
is broadcast, the system switches au-  
tomatically from a station that does not  
provide traffic reports to the appropri-  
ate traffic information station within the  
broadcasting network that does.  
Switching HICUT on/off  
Press the MENU button 9.  
Once the traffic report has been played,  
the system will switch back to the pro-  
gramme that you were listening to be-  
fore.  
Press the or button 7 repeat-  
edly until “HICUT” appears in the  
display.  
Switching traffic information  
priority on/off  
Press the or button 7 to ad-  
just the HICUT setting.  
“HICUT 0” means that no automatic re-  
duction of the treble and interference  
level will be made; “HICUT 1” means  
that a maximum reduction will be made.  
Press the TRAF button =.  
Traffic announcement priority is active  
when a traffic-jam symbol lights up in  
the display.  
Press the MENU button 9 or the  
Note:  
OK button :.  
You will hear a warning sound:  
Configuring the display  
if you leave the reception area of a  
traffic information station that you  
are currently listening to.  
You have the option in radio mode of  
displaying the waveband together with  
the memory location or time in the low-  
er display area.  
if, while listening to a CD/MP3 or  
CD in the changer, you leave the  
reception area of a traffic informa-  
tion station that the system is tuned  
into, and the subsequent automatic  
search cannot find a new traffic in-  
formation station.  
Briefly press the DIS button 8 to  
switch between the two options.  
if you retune the radio from a traffic  
information station to a station that  
does not broadcast traffic informa-  
tion.  
48  
TRAFFIC INFORMATION  
CD MODE  
If you hear the warning sound, you can  
either switch off traffic information pri-  
ority or tune into a station that broad-  
casts traffic information.  
CD mode  
You can use this device to play stand-  
ard audio CDs, CD-Rs and CD-RWs  
with a diameter of 12 or 8 cm.  
Setting the volume for traffic  
announcements  
Besides being able to play audio CDs  
on this device, you can also play CDs  
containing MP3 music files. For further  
details, read the chapter entitled “MP3  
mode”.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “TA VOLUME” appears in  
the display.  
Risk of severe damage to the  
CD drive!  
Adjust the volume using the  
Contoured CDs (shape CDs) are not  
suitable for playback in this unit.  
We accept no responsibility for any  
damage to the CD drive that may  
occur as a result of the use of un-  
suitable CDs.  
buttons 7.  
When you have finished making your  
changes,  
press the MENU button 9 twice or  
the OK button : twice.  
Switching to CD mode  
If there is no CD inserted in the  
Note:  
Using the volume control 5, you  
can also adjust the volume during  
a traffic announcement for the du-  
ration of that announcement.  
drive,  
press the  
button 2.  
The flip-release panel opens.  
Note:  
Gently insert the CD with its printed  
side uppermost into the drive until  
you feel some resistance.  
You can adjust the sound settings  
and volume distribution settings for  
traffic announcements. For further  
details, refer to the chapter entitled  
“Sound”.  
The drive draws in the CD automatical-  
ly.  
You must not hinder or assist the drive  
as it draws in the CD.  
Gently close the control panel  
whilst exerting a little pressure until  
you feel it click into place.  
The CD starts playing.  
49  
CD MODE  
Note:  
Random track play (MIX)  
If the ignition was switched off be-  
fore you inserted the CD, you will  
first have to switch on the device  
by pressing button 1 in order to  
start playing the CD.  
Press the 4 MIX button ;.  
“MIX CD” appears briefly in the display  
and the MIX symbol lights up. The next  
randomly selected track will then be  
played.  
If a CD is already inserted in the  
drive,  
Cancelling MIX  
press the SRC button @ repeated-  
Press the 4 MIX button ; again.  
“MIX OFF” appears briefly in the dis-  
play and the MIX symbol disappears.  
ly until “CD” appears in the display.  
Playback begins from the point at which  
it was last interrupted.  
Scanning tracks (SCAN)  
You can briefly play all the tracks on the  
CD.  
Selecting tracks  
Press one of the arrow buttons 7  
to select the next or previous track.  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds. The next track will then be  
played briefly.  
If you press the or button 7 once,  
the player will play the current track  
again from the beginning.  
Fast track selection  
Note:  
You can set the scanning time. For  
further details, please read the sec-  
tion entitled “Setting the scanning  
time” in the “Radio mode” chapter.  
To quickly select tracks backwards or  
forwards,  
press and hold down one of the  
/
buttons 7 until fast-reverse /  
fast-forward track selection begins.  
Stopping SCAN and continuing  
listening to a track  
Fast searching (audible)  
To fast search backwards or forwards,  
To stop scanning, press the OK  
button :.  
press and hold down one of the  
buttons 7 until fast searching  
backwards / forwards begins.  
The currently scanned track will then  
continue to be played normally.  
50  
CD MODE  
To switch between the display options,  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
press the 5 RPT button ;.  
“REPEATTRACK” appears briefly in the  
display and the RPT symbol lights up.  
The track is repeated continuously until  
you deactivate RPT.  
press the DIS button 8 repeatedly  
until the display that you want ap-  
pears.  
Displaying CD text  
Some CDs include CD text. The CD text  
might contain the names of the artist,  
album and tracks.  
Cancelling REPEAT  
You can allow the CD text to be dis-  
played as scrolling text every time you  
switch to another track. The standard  
display will appear again after the whole  
If you want to deactivate the repeat func-  
tion,  
press the 5 RPT button ; again.  
“REPEAT OFF” appears briefly in the CD text has been shown once. For fur-  
display and the RPT symbol disappears. ther information, read the section enti-  
Normal playback is then resumed.  
tled “Changing the display”.  
Switching CD text on/off  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “CD TEXT” appears in  
the display.  
Cancelling pause  
Press the 6 button ; while in  
Switch the CD text function on  
(“TEXT ON”) or off (“TEXT OFF”)  
using the or button 7.  
pause mode.  
Playback is resumed.  
When you have finished making your  
changes,  
Changing the display  
You can choose from various display  
options in CD mode:  
press the MENU button 9 twice or  
the OK button : twice.  
Track number, playing time and  
clock time  
Scrolling CD text  
Track number, CD name and clock  
If the CD that is inserted in the drive  
contains CD text, you can make the  
system display the text during playback.  
time  
Track number, CD name and play-  
ing time  
Briefly press the 1 SCL button 6.  
51  
CD MODE  
Naming CDs  
Use the  
/
buttons 7 to select  
“CD NAME”.  
The car sound system allows you to  
assign names for up to 30 CDs so that  
you can recognise them more easily.  
The names can be up to eight charac-  
ters long.  
Press the or button 7.  
Press and hold down the MENU  
button 9. You will hear a beep af-  
ter four seconds and “DELETE  
NAME” appears in the display.  
“CD NAME FULL” will appear in the dis-  
play if you try assigning more than 30  
names.  
Let go of the MENU button 9.  
The CD name will be deleted.  
To return to the menu,  
Entering/editing CD names  
Listen to the CD that you want.  
Press the MENU button 9.  
press the MENU button 9 twice or  
the OK button : twice.  
Use the  
“CD NAME”.  
buttons 7 to select  
Deleting all CD names  
You can delete all the CD names stored  
in the car sound system.  
Press the or button 7 twice.  
You will now enter editing mode. If your  
CD has not been named yet, eight un-  
derscores will appear in the display.  
The currently active input position flash-  
es.  
Listen to a CD.  
Press the MENU button 9.  
Use the  
/
buttons 7 to select  
“CD NAME”.  
Use the  
/
buttons 7 to select  
Press the or button 7.  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
Press and hold down the MENU  
button 9. You will hear a beep af-  
ter four seconds and “DELETE  
NAME” appears in the display.  
Continue holding the button  
Use the or button 7 to move  
from one input position to another.  
pressed down until you hear a sec-  
ond beep and “DELETE ALL” ap-  
pears in the display.  
To save the name, press the  
MENU button 9 twice or the OK  
button : twice.  
Let go of the MENU button 9.  
The CD names will be deleted.  
To return to the menu,  
Deleting a CD name  
Listen to the CD whose name you  
want to delete.  
press the MENU button 9 twice or  
Press the MENU button 9.  
the OK button : twice.  
52  
CD MODE  
MP3 MODE  
Traffic announcements in CD  
mode  
If you wish to receive traffic announce-  
ments in CD mode,  
MP3 mode  
You can also use this car sound sys-  
tem to play CD-Rs and CD-RWs that  
contain MP3 music files.  
MP3 is a process developed by the  
Fraunhofer Institute for compressing CD  
audio data. Compression allows data to  
be reduced to around 10% of their orig-  
inal size without a noticeable loss in  
quality (at a bit rate of 128 kbit/s). If a  
lower bit rate is used to convert CD au-  
dio data to MP3, you will be able to cre-  
ate smaller files but this will be accom-  
panied by a loss in audio quality.  
press the TRAF button =.  
Traffic announcement priority is active  
when a traffic-jam symbol lights up in  
the display. For further details, read the  
chapter entitled “Traffic information re-  
ception”.  
Ejecting a CD  
Press the  
button 2.  
The flip-release panel opens out to-  
wards you.  
Preparing an MP3-CD  
The various combinations of CD burn-  
ers, CD burning software and CD blanks  
may lead to problems arising with the  
device’s ability to play certain CDs. If  
problems occur with your own burned  
CDs, you should try another brand of  
CD blank or choose another colour of  
CD blank.  
Press the eject button A next to  
the CD compartment.  
The CD is ejected.  
Remove the CD and close the con-  
trol panel.  
Note:  
If a CD is ejected, the drive will au-  
tomatically draw it back in again  
after 10 seconds.  
The format of the CD must be ISO 9660  
Level 1 / Level 2 or Joliet. Other formats  
cannot be played reliably.  
You can also eject CDs whilst the  
device is switched off or whilst an-  
other audio source is activated.  
You can create a maximum of 253 di-  
rectories on a CD. You can use this de-  
vice to access each of these directo-  
ries.  
Regardless of the number of directories  
on the CD, the device can handle up to  
65,535 MP3 files on a single CD - even  
if they are all stored in one directory.  
53  
MP3 MODE  
This device supports as many subdirec- Note:  
tories as your burner software can cre- When naming directories and  
ate despite the fact that the maximum  
directory depth defined by the ISO 9660  
standard is only 8.  
tracks/files you should avoid using  
accents and special characters.  
You can use a maximum of 32  
characters (including the “.MP3” file  
extension) for track names and di-  
rectory names.  
D
i
r
D01  
If you like your files to be in the correct  
order, you should use burner software  
that places files in alphanumerical or-  
der. If your software does not provide  
this feature you also have the option of  
sorting the files manually. To do so, you  
should place a number (e.g. “001”,  
“002”, etc.) at the beginning of each file  
name - you must include the leading  
zeros.  
e
c
t
D02  
D03  
o
r
i
e
s
D04  
T001  
T001  
T002  
T003  
T004  
T005  
T002  
T003  
T004  
T005  
T006  
T007  
T008  
T009  
T010  
T011  
T
r
a
c
k
s
¥
F
i
MP3 tracks can contain additional in-  
formation such as the artist, album and  
track names (ID3 tags). This device can  
display ID3 tags if they are version  
type 1.  
T001  
T002  
T003  
T004  
T005  
T006  
l
e
s
When creating (encoding) MP3 files  
from audio files, you should use bit rates  
up to a maximum of 256 kbits/sec.  
This device can only play MP3 files that  
have the “.MP3” file extension.  
JYou can name each directory using a  
PC. The device is capable of displaying  
the directory name. Name the directo-  
ries and tracks/files using your CD burn-  
er software. The software’s instruction  
manual will provide details on how to  
do this.  
Note:  
To ensure uninterrupted playback,  
do not try changing the file exten-  
sion to “.MP3” of any files other  
than MP3 files and then attempt to  
play them! (The device will ignore  
these invalid files during playback.)  
54  
MP3 MODE  
Do not use “mixed” CDs containing  
both non-MP3 data and MP3  
Selecting tracks/files  
To move up or down to another track/  
file in the current directory,  
tracks (the device will only read  
MP3 files during MP3 playback).  
press the or button 7 once or  
Do not use mix-mode CDs contain-  
ing both CD-audio tracks and MP3  
tracks. If you try playing a mix-  
mode CD, the device will only play  
the CD-audio tracks.  
several times.  
If you press the button 7 once, the  
current track will be played again from  
the beginning.  
Fast searching  
Switching to MP3 mode  
To fast search backwards or forwards,  
MP3 mode is activated in the same way  
as normal CD mode. For further details,  
please read the section entitled “Switch-  
ing to CD mode” in the “CD mode” chap-  
ter.  
press and hold down the or  
button 7 until fast searching back-  
wards / forwards begins.  
Random track play (MIX)  
To play the tracks in the current directo-  
ry in random order,  
Selecting a directory  
To move up or down to another directo-  
ry,  
briefly press the 4 MIX button ;.  
“MIX DIR” appears in the display and  
the MIX symbol lights up.  
press the or button 7 once or  
several times.  
Note:  
To play all the tracks on the inserted  
MP3-CD in random order,  
The device will automatically skip  
any directories that do not contain  
MP3 files. The device will automati-  
cally correct the number of directo-  
ries for the display. This new  
number will therefore no longer be  
identical to the number of directo-  
ries that you actually created.  
press and hold down the 4 MIX  
button ; for longer than two sec-  
onds.  
“MIX CD” appears in the display and the  
MIX symbol lights up.  
Cancelling MIX  
To cancel MIX,  
briefly press the 4 MIX button ;.  
“MIX OFF” appears in the display and  
the MIX symbol disappears.  
55  
MP3 MODE  
Cancelling REPEAT  
Scanning tracks (SCAN)  
To stop the current track or current di-  
rectory from being repeated,  
You can briefly play all the tracks on the  
CD.  
briefly press the 5 RPT button ;.  
“REPEAT OFF” appears briefly and  
RPT disappears from the display.  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds. The next track will then be  
played briefly.  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
“TRACK SCAN” appears in the display  
alongside the flashing track numbers.  
The tracks on the CD are briefly played  
in ascending order.  
Cancelling pause  
Note:  
Press the 6 button ; while in  
You can set the scanning time. For  
further details on setting the scan-  
ning time, please read the section  
entitled “Setting the scanning time”  
in the “Radio mode” chapter.  
pause mode.  
Playback is resumed.  
Configuring the display  
Configuring the default display  
Stopping SCAN and continuing  
listening to a track  
You can display various information on  
the current track:  
Briefly press the OK button :.  
The currently scanned track will then  
continue to be played normally.  
Track number, playing time and di-  
rectory number  
Track number, playing time and  
Repeating individual tracks or  
whole directories (REPEAT)  
To play the current track repeatedly,  
clock time  
After you switch tracks, the device first  
displays the MP3 scrolling text once and  
then it displays the above information  
continuously.  
briefly press the 5 RPT button ;.  
“REPEATTRACK” appears briefly in the  
display and RPT lights up.  
To switch between the different display  
options,  
To repeat the whole directory,  
press the DIS button 8.  
press and hold down the 5 RPT  
button ; for longer than two sec-  
onds.  
“REPEAT DIR” appears briefly in the  
display.  
56  
MP3 MODE  
Configuring the MP3 scrolling text  
Displaying MP3 scrolling text  
You can configure the device to display To display the selected MP3 scrolling  
one of the following scrolling texts eve- text again during playback,  
ry time you change the track. The de-  
vice displays the scrolling text once.  
briefly press the 1 SCL button 6.  
Note:  
After the device has displayed the scroll-  
ing text it returns to the default display  
(see above). The available display op-  
tions are:  
If you selected the artist, album or  
track name as scrolling text and the  
MP3 track does not contain this in-  
formation, the device will not dis-  
play anything if you press the 1  
SCL button.  
Directory name  
File name  
Artist name  
Track name  
Album name  
Note:  
The artist, track and album names  
are part of the MP3-ID tag (version  
1) and can only be displayed if they  
have been saved with the MP3  
files (for further information, read  
the instructions that came with your  
PC’s MP3 software or burner soft-  
ware).  
To switch between the different display  
options,  
press the MENU button 9.  
Press the or button 7 repeat-  
edly until “MP3 DISPLAY” appears  
in the display.  
Using the or button 7 to se-  
lect the type of MP3 scrolling text  
that you want.  
When you have finished making your  
changes,  
press the MENU button 9 twice or  
the OK button : twice.  
57  
CD-CHANGER MODE  
CD-changer mode  
Changing the display  
There are two display options available:  
Note:  
Track number, playing time and  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
clock time  
Track number, playing time and CD  
number  
To switch between the display options,  
Switching to CD-changer mode  
press the DIS button 8.  
Press the SRC button @ repeat-  
edly until “CHANGER” appears in  
the display.  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
The device starts playing the first CD  
that the CD changer detects.  
briefly press the 5 RPT button ;.  
“REPEAT TRACK” appears briefly and  
RPT lights up in the display.  
Selecting CDs  
To move up or down to another CD,  
To repeat the current CD,  
press the or button 7 once or  
press and hold down the 5 RPT  
button ; for longer than two sec-  
onds.  
several times.  
Note:  
The device will ignore empty CD  
slots in the changer and slots con-  
taining invalid CDs.  
“REPEAT DISC” appears briefly and  
RPT lights up in the display.  
Cancelling REPEAT  
Selecting tracks  
To move up or down to another track  
on the current CD,  
To stop the current track or current CD  
from being repeated,  
briefly press the 5 RPT button ;.  
“REPEAT OFF” appears and RPT dis-  
appears from the display.  
press the or button 7 once or  
several times.  
Fast searching (audible)  
To fast search backwards or forwards,  
press and hold down one of the  
buttons 7 until fast searching  
backwards / forwards begins.  
58  
CD-CHANGER MODE  
Note:  
Random track play (MIX)  
You can set the scanning time. For  
further details, please read the sec-  
tion entitled “Setting the scanning  
time” in the “Radio mode” chapter.  
To play the tracks on the current CD in  
random order,  
briefly press the 4 MIX button ;.  
“MIX CD” appears briefly and MIX lights  
up in the display.  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
To play the tracks on all inserted CDs in  
random order,  
press and hold down the 4 MIX  
button ; for longer than two sec-  
onds.  
Cancelling pause  
Press the 6 button ; while in  
pause mode.  
“MIX ALL” appears briefly and MIX  
lights up in the display.  
Playback is resumed.  
Cancelling MIX  
Briefly press the 4 MIX button ;.  
“MIX OFF” appears and MIX disappears  
from the display.  
Scanning all tracks on all CDs  
(SCAN)  
To briefly play all the tracks on all the  
inserted CDs in ascending order,  
press and hold down the OK but-  
ton : for longer than two sec-  
onds.  
“TRACK SCAN” appears in the display  
and the number of the current track  
flashes.  
Stopping SCAN  
To stop scanning,  
briefly press the OK button :.  
The currently scanned track will then  
continue to be played normally.  
59  
CLOCK - TIME  
Press the or button 7 to  
CLOCK - Time  
switch between the modes.  
Briefly displaying the time  
When you have finished making your  
changes,  
You can make the time appear continu-  
ously in the bottom part of the display  
while any audio source is activated. For  
further information on this, read the rel-  
evant sections in the relevant chapters.  
press the MENU button 9 or the  
OK button :.  
Displaying the time continuously  
when the device is off and the  
ignition is on  
Setting the clock time  
To set the clock time,  
To display the time when the device is  
off and the vehicle ignition is on,  
press the MENU button 9.  
Press the or button 7 repeat-  
edly until “CLOCK SET” appears in  
the display.  
press the MENU button 9.  
“MENU” appears in the display.  
Press the or button 7 repeat-  
edly until “CL DISP OFF” or  
“CL DISP ON” appears in the dis-  
play.  
Press the button 7.  
The time appears in the display. The  
minutes flash and can be adjusted.  
Adjust the minutes using the  
/
Press the or button 7 to  
switch between the ON/OFF set-  
tings.  
buttons 7.  
Once the minutes are set,  
press the button 7.  
The hours flash.  
When you have finished making your  
changes,  
press the MENU button 9 or the  
Adjust the hours using the  
/
OK button :.  
buttons 7.  
Press the MENU button 9 twice  
or the OK button : twice.  
Selecting 12/24-hour clock  
mode  
Press the MENU button 9.  
“MENU” appears in the display.  
Press the or button 7 repeat-  
edly until “24 H MODE” or “12 H  
MODE” appears in the display.  
60  
SOUND  
When you have finished making your  
changes,  
Sound  
You can adjust the sound settings (bass  
and treble) separately for each source  
(radio, CD/MP3, CD changer,AUX, traf-  
fic announcement, telephone/naviga-  
tion). The volume distribution settings  
press the AUDIO button >.  
Setting the left/right volume  
distribution (balance)  
(balance and fader) apply to all the au- To adjust the left/right volume distribu-  
dio sources.  
tion (balance),  
press the AUDIO button >.  
“BASS” appears in the display.  
Note:  
You can only adjust the audio set-  
tings for traffic announcements and  
the navigation system whilst a traf-  
fic announcement or navigation an-  
nouncement is actually playing.  
Likewise, you can only adjust the  
telephone audio settings during a  
telephone call.  
Press the button 7 repeatedly  
until “BALANCE” appears in the  
display.  
Press the or button 7 to ad-  
just the balance (right/left).  
When you have finished making your  
changes,  
Adjusting the bass  
press the AUDIO button >.  
Press the AUDIO button >.  
“BASS” appears in the display.  
Adjusting the front/back volume  
distribution (fader)  
To adjust the front/back volume distri-  
bution (fader),  
Press the or button 7 to ad-  
just the bass.  
When you have finished making your  
changes,  
press the AUDIO button >.  
press the AUDIO button >.  
“BASS” appears in the display.  
Press the button 7 repeatedly  
until “FADER” appears in the dis-  
play.  
Adjusting the treble  
Press the AUDIO button >.  
“BASS” appears in the display.  
Press the or button 7 to ad-  
Press the button 7 repeatedly  
until “TREBLE” appears in the dis-  
play.  
just the fader (front/back).  
When you have finished making your  
changes,  
Press the or button 7 to ad-  
press the AUDIO button >.  
just the treble.  
61  
SOUND  
X-BASS  
Equalizer presets  
X-BASS  
This device is equipped with an equal-  
izer that has been preset with settings  
for the “ROCK”, “POP” and “CLASSIC”  
music styles.  
The X-BASS feature can be used to  
boost the bass at low volume levels.  
Note:  
You can adjust the X-Bass settings  
separately for each audio source  
(radio, CD/MP3, CD changer and  
AUX).  
To select an equalizer preset,  
press the AUDIO button >.  
“BASS” appears in the display.  
Adjusting the X-BASS boost  
settings  
Press the button 7 repeatedly  
until “EQ POP”, “EQ ROCK”, “EQ  
CLASSIC” or “EQ OFF” appears in  
the display.  
You can set the X-BASS boost in steps  
ranging from 1 to 3.  
Press the or button 7 to se-  
lect one of the presets or select  
“EQ OFF” to switch off the equaliz-  
er. DEQ lights up in the display if  
you select one of the presets.  
“X-BASS OFF” means that the X-BASS  
feature is switched off.  
Press the X-BASS button ?.  
Press the or button 7 repeat-  
edly until the setting that you want  
appears in the display.  
When you have finished making your  
changes,  
When you have finished making your  
changes,  
press the AUDIO button >.  
press the X-BASS button ?.  
62  
CONFIGURING THE LEVEL DISPLAY / ADJUSTING THE BRIGHTNESS  
Press the or button 7 repeat-  
edly until “DIM DAY” or “DIM  
Configuring the level  
display  
The level display temporarily provides  
you with a symbolic representation of  
the volume and audio settings whilst you  
are adjusting them.  
NIGHT” appears in the display.  
Press the or button 7 to  
switch between the brightness lev-  
els.  
When you have finished making your  
changes,  
When you are not changing any set-  
tings, the level display depicts the sound  
system’s output level. You can switch  
the level display on/off.  
press the MENU button 9 twice or  
the OK button : twice.  
Press the MENU button 9.  
“MENU” appears in the display.  
Adjusting the viewing angle  
Press the or button 7 repeat-  
edly until “PEAK LEVEL” appears  
in the display.  
Since vehicle manufacturers all provide  
different installation positions for car radi-  
os in their vehicles, the installation angles  
are different too. This can result in the dis-  
play being difficult to read when the car  
radio is installed in certain positions.  
Press the or button 7 to  
switch between “PEAK LVL ON”  
and “PEAK LVL OFF”.  
If this is the case, it is absolutely neces-  
sary that you configure the display to suit  
this angle.  
When you have finished making your  
changes,  
press the MENU button 9 twice or  
To do so, please proceed as follows:  
the OK button : twice.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VIEW ANGLE” appears  
in the display.  
Adjusting the brightness  
(dimmer)  
The display brightness will change when  
the headlights are turned on/off if your  
car sound system is connected as de-  
scribed in the installation instructions  
and your vehicle is equipped with the  
appropriate connections. You can ad-  
just the display brightness separately for  
night and day in steps ranging from 1 -  
9. We recommend a setting of “6”.  
Press the or button 7 to ad-  
just the viewing angle (-4 ... +4).  
When you have finished making your  
changes,  
press the MENU button 9 twice or  
the OK button : twice.  
Press the MENU button 9.  
“MENU” appears in the display.  
63  
EXTERNAL AUDIO SOURCES  
External audio sources  
Instead of connecting a CD changer,  
you can connect another audio source  
equipped with a line output.Audio sourc-  
es can, for example, be portable CD  
players, MiniDisc players or MP3 play-  
ers.  
TMC  
TMC for dynamic navigation  
systems  
TMC stands for “Traffic Message Chan-  
nel.” Traffic reports are broadcast digit-  
ally using TMC, which means they can  
be used by compatible navigation sys-  
tems during route planning. Your car  
sound system has a TMC output, which  
you can use for connecting Blaupunkt  
navigation systems. You can find out  
from your Blaupunkt dealer which nav-  
igation systems can be used with your  
car sound system.  
The AUX input must be activated in the  
menu.  
If you want to connect an external au-  
dio source, you will need an adapter  
cable. You can obtain this cable (Blau-  
punkt no.: 7 607 897 093) from your  
authorised Blaupunkt dealer.  
If a navigation system is connected and  
a TMC station is being received, TMC  
lights up in the display.  
Switching the AUX input on/off  
Press the MENU button 9.  
“MENU” appears in the display.  
If dynamic navigation is active, the sys-  
tem will tune into a TMC station auto-  
matically.  
Press the or button 7 repeat-  
edly until “AUX OFF” or “AUX ON”  
appears in the display.  
Press the or button 7 to  
switch AUX on/off.  
When you have finished making your  
changes,  
press the MENU button 9 or the  
OK button :.  
Note:  
If the AUX input is switched on, you  
can select it by pressing the SRC  
button @.  
64  
SPECIFICATIONS  
CD  
Specifications  
Frequency response:  
Amplifier  
20 - 20,000 Hz  
3 V  
Output power:  
4 x 25 watts sine  
in accordance  
with DIN 45 324 at  
14.4 V  
Pre-amp Out  
4 channels:  
4 x 45 watts max.  
power  
Input sensitivity  
AUX input  
: 2 V / 6 k  
Tuner  
Wavebands in Europe:  
Tel./Navi input  
: 10 V / 1 kΩ  
FM  
MW :  
LW  
:
87.5 - 108 MHz  
531 - 1602 kHz  
153 - 279 kHz  
:
Wavebands in the United States:  
FM  
AM  
:
:
87.5 - 107.9 MHz  
530 - 1710 kHz  
Wavebands in Thailand and Asia:  
FM  
AM  
:
:
87.5 - 108 MHz  
531 - 1602 kHz  
FM frequency response:  
35 - 16,000 Hz  
Subject to changes!  
65  
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Número de  
serviço / Servicenumre  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5444  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 94 12 711  
01-4598830  
02-369 62464  
40 2085  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 210 94 27 337  
(IRL) 01-4149400  
(I)  
02-369 62331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 023-565 6348  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0441  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
01-333 9575  
Poland  
(PL) 0800-118922  
(TR) 0212-3350677  
(USA) 800-2662528  
Turkey  
USA  
0212-3460040  
708-6817188  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
02/04  
CM/PSS 8 622 403 883  

Aluratek CINECAM AHDVC01F User Manual
Aluratek HD 1080P User Manual
Blaupunkt Car Stereo System 400 BT User Manual
Cuisinart DLC 2014N User Manual
Dell XLH1 User Manual
Dual Car Amplifier DA301L User Manual
Hitachi DZ HS500SW User Manual
Huey Chiao HCB29 User Manual
JL Audio A2150 User Manual
JVC GET0651 001A User Manual