DZ-HS500SW
DZ-HS500SW
Instruction manual
Toobtainthebestperformanceandensureyearsof
trouble-free use, please read this entire instruction
manual.
Инструкция по эксплуатации
Если Вы хотите получить надежные
результаты при воспроизведении и работать
видеокамерой в следующие годы без
возникновения каких-либо проблем, прежде
всего прочтите полностью эту инструкцию по
эксплуатации.
DVDCAM PC Software Support Centre
URL http://dvdcam-pc.support.hitachi.ca/
Support Centre phone numbers for software provided:
Телефон центра программного обслуживания для прилагаемого программного обеспечения:
PIXELA PC Software Support Centre
+63-2-438-0090
URL: http://www.pixela.co.jp/oem/hitachi/e/index.html
IMPORTANT SAFETY INSTRUCTIONS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a
major factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/
recorder and accessory equipment.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8
9
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Protect the mains lead from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
10 Only use attachments/accessories specified by the
manufacturer.
11 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
12 Unplug this apparatus during lightning storms or
when unused for long periods of time.
13 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as mains lead or plug is
damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
14 The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
15 The equipment (AC Adapter/Charger) shall be
used near the socket-outlet and shall be easily
accessible.
3
Cautions on HDD
Save the data recorded on HDD:
• To back up the data recorded on HDD, save it on a DVD. It is also recommended that you use this
DVD video camera/recorder to dub the data. You can also use a PC to save the data on a DVD.
• It is recommended that you periodically save your recordings.
Do not subject the DVD video camera/recorder to any vibrations or impact:
• This could result in the HDD not being recognised or recording, playback or dubbing to become
impossible.
• Do not subject this DVD video camera/recorder to any vibrations or impact especially during
recording, playback or dubbing, or while the ACCESS/PC indicator is lit or blinking.
• If vibrations to this DVD video camera/recorder are repeated, or the drop status of DVD video
camera/recorder is detected (see page 65), recording, playback or dubbing will stop to protect the
HDD in this DVD video camera/recorder.
Carefully check the temperature of this DVD video camera/recorder:
• If the temperature of this DVD video camera/recorder is too high or too low, normal recording or
playback may not be possible.
• If the power switch is set to “HDD” with the temperature of this DVD video camera/recorder too
high or too low, message “The temperature of HDD is outside the operating temperature range.
Turn off power.” may appear to protect the HDD. Even if this happens, setting the power switch to
“DVD” may allow you to use the DVD video camera/recorder with a DVD, so it is recommended
that you carry a spare DVD even if you intend to record on the HDD.
This DVD video camera/recorder cannot be used at high altitude:
• Note that the DVD video camera/recorder cannot be used in a place where the atmospheric
pressure is low, such as 3,000 meters or more above sea-level.
Do not place this DVD video camera/recorder near a magnet or magnetic field:
• If you so, recording, playback or dubbing may not be possible.
Please note in advance that Hitachi will not accept any liability or make compensation for loss
of data, or direct or indirect damage when recording or playback is not performed normally
due to a fault in this DVD video camera/recorder. This also applies to repairs on this DVD
video camera/recorder (including repair of components other than HDD).
Cautions When Using
• Hitachi cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD video camera/
recorder, disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.
• If you or a third party make a mistake when handling this DVD video camera/recorder, disc,
card, etc., the recorded contents may be lost. We cannot be responsible for compensation for
damage due to loss of recorded contents.
Handle the liquid crystal display (LCD) with care:
• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with
a sharp object.
• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear
soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
• Do not place the DVD video camera/recorder with the open LCD screen down.
• Close the LCD monitor when not using the DVD video camera/recorder.
4
Liquid crystal display (LCD) and viewfinder:
• The LCD screen and viewfinder are the products of highly precise technology. Among the total
number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels
for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured dots
(red, blue, green). This shows the limitations of the current technology, and does not indicate a
fault that will interfere with recording.
• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal
brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD
video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
Heat on surface of product:
• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly
warm, but this does not indicate a fault.
Screen on connected TV:
• Never leave the Disc Navigation screen, still image or camera image displayed on your TV to
which the DVD video camera/recorder is connected: Doing so could result in displayed image
retention or phosphor degradation of TV screen.
Be careful of ambient temperature:
• If the temperature of this DVD video camera/recorder is too high or too low, normal recording/
playback may not be possible.
• Take care that the temperature of this DVD video camera/recorder, when connected to PC does
not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).
• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
Do not point directly at the sun:
• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction
or a fire could occur.
• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
• This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as a radio
wave tower or electric appliances, recording or playback may stop, or noise could enter the video
and audio that are being recorded. During playback of normally recorded video and audio, noise
may also be present in picture and sound.
At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
5
Do not use the DVD video camera/recorder near corrosive gas:
• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated
by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring
area, the external or internal terminals could corrode, which would disable normal operation, or
the battery connecting terminals could corrode, so power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the
air, and white particles could adhere to the optical head of the DVD video camera/recorder, which
could cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block for
DVD, and in such a case the DVD video camera/recorder might not operate normally. Turn the
DVD video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
• Cleaning the DVD lens is not necessary when using this DVD video camera/recorder in the usual
way.
• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.
Be careful of moisture condensation:
• When you move the DVD video camera/recorder between places where the difference in
temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or
vehicle – condensation (vapour in air warmed or cooled to water droplets) could occur on the lens
and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of
disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,
dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may
remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2
hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video
camera/recorder could exceed the limit and the recording/playback operation may slow down or
other faults could occur. If this happens, turn it off and wait for a while before using it again.
6
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
• The ACCESS/PC or CARD ACCESS indicator is lit or
ACCESS/PC
blinking to show that data is being written to disc or card, indicator
or being read from it. At this time, do not do any of the
following, so as not to damage the data:
− Remove battery
− Disconnect AC adapter/charger
− Plug or unplug PC connection cable
− Remove disc or card
− Subject DVD video camera/recorder to severe
vibrations or impact
− Violently open or close the LCD monitor
The ACCESS/PC indicator will light for a while after
recording is finished. While it is lit, do not subject the DVD
video camera/recorder to any vibration or impact, and do
not disconnect the battery or AC adapter/charger.
If, when using HDD/DVD, you turn the DVD video
camera/recorder off while the ACCESS/PC indicator is lit
or blinking, turn it on again: When using a DVD, turn it on
with the DVD loaded. The HDD/DVD will be restored (see page 138).
CARD ACCESS indicator
Do not wipe the DVD video camera/recorder case with benzene or thinner:
• The coating of case could peel off or the case surface could deteriorate.
• When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
• For optional accessories, observe the cautions and follow instruction manuals attached.
The battery provided has not been charged at time of purchase:
• Charge it before using the DVD video camera/recorder (see page 26).
• The battery will discharge as time passes. (The battery is produced so that it discharges on its own
in order to protect its characteristics.)
Disc cannot be inserted or removed unless a charged battery or AC adapter/
charger is connected to the DVD video camera/recorder.
Be sure to set the power switch to “OFF” when turning the DVD video camera/
recorder off:
• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being
powered could cause a fault.
7
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is
very high for a long period of time:
• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave
the DVD video camera/recorder in such a place, it could malfunction or the case could be
damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a
heater.
Do not store the DVD video camera/recorder in a place where the humidity is high
or in a dusty place:
• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,
the lens could be mouldy, and the DVD video camera/recorder could become inoperable. It is
recommended that you put the DVD video camera/recorder with desiccant in a box when storing
it in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong
magnetism or intense vibrations:
• This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
• Leaving the battery attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
• Always make a trial recording before doing actual recording to make sure that recording is normal.
The data that have not been stored normally because of a defect in the DVD video camera/
recorder cannot be restored.
It is recommended that you use the HDD from which recorded contents can be deleted for trial
recording.
Do not use the DVD video camera/recorder for professional applications:
• This DVD video camera/recorder is designed and produced for home-use recording and playback.
Copyright:
• Data recorded on the HDD/disc/card in this DVD video camera/recorder using other digital/
analogue media or devices are protected by the copyright act and cannot be used without
permission of the owner of copyright, except for personal enjoyment. Be aware that recording is
restricted for some demonstrations, performances and exhibitions, even for personal enjoyment.
8
CLEANING
Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.
●Cleaning LCD screen and camera
lens
●Cleaning DVD Video Camera/
Recorder Case
Use dry, soft cloth to wipe dirt off. When
cleaning the LCD screen, be careful not to use
force, scratch it, or subject it to impact: Doing
such could cause a defect in the screen, result in
display unevenness, or damage the LCD
monitor.
●If dust adheres to the viewfinder
lens, remove it using a cotton
swab, etc.
Do not wipe the DVD video camera/recorder
case hard with any foreign object, such as grit,
adhering to it, and do not use rough fabrics to
clean the case: Doing so could scratch it.
Use soft cloth, etc. to gently wipe dirt off the case.
●Do not use benzene or thinner to
clean DVD video camera/recorder
case
The coating of case could peel off or the case
could deteriorate. Wipe off dirt on the case with
a soft cloth which has been completely wrung
out. When using chemical cleaning cloth, follow
instructions for use.
Do not rub the lens with force: Doing so could
scratch the lens.
HANDLING DISCS
• When recording images,
●Using discs
Al
l
Pr ogr ams
001 / 002
the DVD video camera/
recorder may avoid the
portions of disc where
recording is not possible,
due to dust, scratches,
etc. [It will pause 9 at
such a portion and
Discs are very delicate recording media.
Carefully read the following cautions and
observe them:
• Always use a brand new disc when recording
important material.
• Be sure not to touch the recording surface of
disc, or dirty or scratch it.
• If there is dust, scratch, dirt on disc or if it is
warped, the following phenomena may occur:
− Block noise in playback
image
− Momentary stop of
playback image
PLAY
PHOTO SELECT
(Recording one scene
may produce multiple
thumbnails.)
automatically restart
recording (:).]
This will cause recording to be interrupted for
several seconds to several minutes, and
multiple thumbnails will be created by one
recording session as shown above. In this case,
the recordable time on disc will decrease.
• Be careful when removing the disc since the
metal of removal slot of DVD video camera/
recorder, and disc itself, may be hot.
− Sound interrupted during
playback, or abnormal
sound
Block noise
− Blue thumbnail
Al
l
Pr og r a
ms
001/ 006
display* (Fig. 1)
− Disc cannot correctly
be recognised
− Disc cannot be
initialised
− Delay between video
and audio
Even if disc is normal, the above phenomena
may occasionally occur. While the ACCESS/
PC indicator is lit, do not subject disc to
vibrations or impact, and avoid using DVD
video camera/recorder at extremely high or
low temperatures, or in environment where
condensation is likely to occur.
●Storing discs
• When storing disc, replace it in the plastic case
in which it was purchased.
• Be careful that no condensation occurs on disc.
• Do not place disc in following places:
− Direct sunlight for a long time
− Where humidity is high or in dusty place
− Where there is heat from a heater, etc.
PLAY
PHOTO SELECT
Fig. 1
*
9
DISC CLEANING
Use the disc cleaning cloth provided to lightly
wipe off any dirt adhering to the disc as shown
in the figure. Do not wipe the disc with force:
Doing so could cause scratches.
Never use solvent (thinner, water, antistat or
detergent) for cleaning.
Use the disc cleaning
cloth to clean from inner
to outer edges in axial
direction.
Lightly wash the dirty cleaning cloth with
detergent: The dirt removal capacity of the cloth
will improve (rinse the cloth well with water so
that no detergent remains).
NOTE WHEN TRANSFERRING OR DISCARDING DISCS AND SD MEMORY CARDS
•
The “Format” function on this DVD video camera/recorder will only change the file control information:
It will not completely delete the data in the built-in hard disk; your personal data could leak out. To
prevent the data from leaking out, execute complete deletion of HDD (see p. 106).
•
“Formatting” or “deletion” using the functions of DVD video camera/recorder or PC will change only
the file control information: It will not completely delete the data on disc or memory card.
• When transferring or discarding a disc or memory card, it is recommended that you physically
destroy it or use deletion exclusive software (generally available) to completely delete the data on
it. It is user’s responsibility to control the data on disc and memory card.
•
Hitachi will not accept any responsibility for leaking of personal data.
Read This First
To guide you, we have included following five chapters.
• The section on “Setups” explains how to set
up the DVD video camera/recorder, battery,
and set the date/time.
• The section on “Basic Techniques” explains the
basic operation of this DVD video camera/
recorder – recording of movies, still images,
external input and playback of recorded images.
• A quick index for the information you use
most often.
•
A detailed table of contents directing you to
specific information quickly (see pages 13 – 15).
Get to know your DVD video camera/recorder by
using this manual, and get to know Hitachi. We
appreciate your business.
•
The section on “Disc Navigation” explains
editing with Disc Navigation: Refer to this
section when dubbing from HDD to disc,
finalising a DVD-RW/DVD-R/+RW and
initialising a DVD-RAM/DVD-RW/+RW.
Quick Index
Available Discs.................................................23
Recording Movie..............................................40
Playing Back ....................................................68
Functions Available with Disc Navigation.........75
Dubbing on DVD ..............................................79
Connecting to a TV........................................112
Connecting to PC...........................................118
• The section on “Connecting to PC” explains
the contents of provided CD-ROM and how to
install the software included.
• “Subsidiary Information” includes an
introduction to products sold separately, and
troubleshooting.
We want this manual to be as helpful as
possible, so it includes two easy ways to find the
information you need:
With this DVD video camera/recorder you can view the picture being recorded or the playback
picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor
switches the picture to appear on the LCD monitor or in the viewfinder.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder
(see page 33).
10
About This Manual
●Displays in this manual
Understand that the displays are different from those you will actually see in the viewfinder or on
the LCD screen.
●Notation of cancel button
Press the STOP/EXIT button to stop your operation midway, or return the menu screen to the
preceding one. The expression “press the ꢀ button” will be used in this text.
HDD
●
, ꢁ, ꢂ, ꢃ,
, ꢄ and ꢅ marks beside headings
Some functions of this DVD video camera/recorder are unavailable with HDD/disc/card used. Refer
to the marks at right above each function to identify whether the HDD/disc/card is compatible with
the function. Refer to these marks and identify the functions and operation to match the HDD/disc/
card you use.
Microsoft®, Windows®, Windows® Me, Windows® 2000 Professional, and Windows® XP are
registered trademarks of Microsoft Corporation.
Windows Vista™ is a trademark of Microsoft Corporation.
Intel®, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
Intel® Core is a trademark of Intel Corporation.
Macintosh is a trademark of Apple, Inc.
IBM® and PC/AT® are registered trademarks of International Business Machines Corporation.
Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
individual company.
SD logo is a trademark.
11
Introduction
●Recording is possible on both HDD and DVD: In FINE mode, recording for
up to 11 hours is possible on HDD; up to 30 minutes on DVD (p. 40, 155).
●
Dubbing to an 8 cm DVD can be performed on this DVD video camera/recorder
using only one button: Simple dubbing without a DVD recorder or PC (p. 79)
.
●You can capture photos from videos (p. 70).
You can record an image displayed during playback of video as a photo on a card.
●You can start recording immediately after stopping playback (p. 40, 69).
Unlike tape devices, you do not need to search for the recording start position or locate the
beginning of blank portion.
You can stop playback and immediately start recording: New recording will not overwrite any
previously recorded data.
●You can immediately play back desired recorded scenes (p. 68).
You do not need to rewind, unlike recorders using tape.
You can select any scene you want and immediately play it back (using Disc Navigation function).
●Use Disc Navigation to create your original movie (p. 97).
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play List).
To edit the scenes recorded on the HDD, use the dubbing function to easily create a DVD from the
edited original movie. If you edit the scenes recorded on a disc, you can play back the edited original
movie and easily dub it on another DVD recorder or VCR.
●Create original DVDs on PC (p. 118).
You can create an original DVD, using the provided software CD-ROM.
The created DVD disc can be played back on DVD player/recorder, DVD-ROM drive, etc.
12
Table of Contents
VIEWING SUBJECT THROUGH
VIEWFINDER ...................................................31
Setting Date and Time..................................... 32
CHANGING DISPLAY FORMAT OF DATE AND
TIME .................................................................32
Initial Settings.................................................. 33
Important Information.........................................2
For Your Safety..................................................2
Precautions ........................................................2
IMPORTANT SAFETY INSTRUCTIONS...........3
Cautions on HDD ...............................................4
Cautions When Using ........................................4
Cautions When Storing ......................................8
Suggestions and Restrictions.............................8
SWITCHING OPERATING SOUND ON OR OFF
(BEEP)..............................................................33
TURNING DVD VIDEO CAMERA/RECORDER
OFF AUTOMATICALLY (POWER SAVE) ........33
CHANGING DISPLAY LANGUAGE
(LANGUAGE)....................................................33
RESETTING MENU SETTINGS TO DEFAULTS
(RESET)............................................................34
TURNING RECORD LED ON OR OFF
CLEANING ............................................................9
HANDLING DISCS ................................................9
DISC CLEANING.................................................10
NOTE WHEN TRANSFERRING OR DISCARDING
DISCS AND SD MEMORY CARDS .................10
(RECORD LED)................................................34
CHANGING SETTING OF
DEMONSTRATION ..........................................34
LCD/EVF Setup............................................... 35
Read This First.................................................10
About This Manual ...........................................11
Introduction ......................................................12
Table of Contents.............................................13
Checking Provided Accessories.......................16
Names of Parts ................................................17
ADJUSTING BRIGHTNESS OF LCD SCREEN
(LCD BRIGHTNESS) AND VIEWFINDER
(EVF BRIGHTNESS) ........................................35
ADJUSTING COLOUR DENSITY
(COLOUR LEVEL)............................................36
ALWAYS DISPLAYING IMAGE IN
VIEWFINDER ...................................................36
Setups
Demonstration Function...................................20
Setting Up the DVD Video Camera/
Inserting and Removing Disc .......................... 37
Inserting and Removing Card.......................... 39
Recorder........................................................20
HOLDING DVD VIDEO CAMERA/
RECORDER .....................................................20
ATTACHING SHOULDER STRAP......................20
ATTACHING LENS CAP .....................................21
Basic Techniques
Recording Movie ............................................. 40
Recording Stills ............................................... 41
Swift Restart of Recording
HDD/DVD/Cards ..............................................22
HDD, DISCS........................................................23
INFORMATION ON DVD-R.................................23
NOTES ON FINALISATION ................................23
EXAMPLES OF DISCS THAT CANNOT BE USED
ON THIS DVD VIDEO CAMERA/
(SLEEP/RESTART button)........................... 42
On-Screen Information.................................... 43
INFORMATION DISPLAY DURING
RECORDING....................................................43
RECORDER .....................................................24
AVAILABLE CARDS............................................24
CAUTIONS FOR DISC AND CARD.........................24
Checking Flow of Menu................................... 48
Zooming .......................................................... 50
MACRO RECORDING ........................................50
RECORDING SUBJECTS FOR STRONGER
WIDE-ANGLE OR TELEPHOTO EFFECT.......51
Preparations for Power Supply ........................25
USING DVD VIDEO CAMERA/RECORDER WITH
AC ADAPTER/CHARGER................................25
Manually Focusing Subject ............................. 52
FOCUSING DURING RECORDING....................52
Adjusting Brightness of Image to be recorded
(Exposure) .................................................... 54
Compensating for Backlight ............................ 54
Using Full Auto Function ................................. 55
Setting Up Camera Functions ......................... 56
Setting Up the Battery......................................26
CHARGING BATTERY........................................26
ATTACHING BATTERY TO DVD VIDEO
CAMERA/RECORDER.....................................27
REMOVING BATTERY........................................27
BATTERY REMAINING LEVEL INDICATOR......29
EFFICIENT USE OF BATTERY ..........................29
Turning DVD Video Camera/Recorder
On and Off.....................................................30
Viewing Images................................................31
SELECTING SHOOTING MODE TO MATCH THE
SUBJECT
(SWITCHING PROGRAMME AE MODE) ........56
RECORDING DARK SUBJECTS USING LCD
MONITOR LIGHT .............................................57
VIEWING IMAGE ON LCD MONITOR
SCREEN...........................................................31
13
ADJUSTING COLOUR (WHITE BALANCE)....... 57
USING THE ELECTRONIC IMAGE
STABILISER (EIS)............................................ 59
Scene...............................................................84
DELETING SCENES (EDIT – DELETE) .............84
DIVIDING MOVIES (EDIT – DIVIDE) ..................85
COMBINING MULTIPLE SCENES
(EDIT – COMBINE) ..........................................86
ARRANGING ORDER OF SCENES
RECORDING SUBJECT USING LARGE
MAGNIFICATION (DIGITAL ZOOM)................ 59
REDUCING WIND NOISE DURING RECORDING
(MIC.FILTER) ................................................... 59
(EDIT – MOVE).................................................86
DIRECTING SCENES EFFECTIVELY
Setting Up Record Functions...........................60
SWITCHING MOVIE QUALITY
(EFFECT – FADE)............................................87
(VIDEO MODE) ................................................ 60
PLAYING BACK BY SKIPPING SCENES
SETTING TO WIDE TV SCREEN MODE
(16:9 MODE)..................................................... 61
SWITCHING QUALITY OF STILL IMAGE
(EFFECT – SKIP) .............................................88
CHANGING IMAGES FOR THUMBNAILS
(EFFECT – THUMBNAIL).................................89
COPYING STILLS ON DVD-RAM TO CARD
(COPY) .............................................................90
LOCKING SCENES ON CARD (LOCK)..............91
SELECTING SCENES USING MENU SCREEN
(SELECT) .........................................................92
DISPLAYING INFORMATION USING MENU
SCREEN (DETAIL)...........................................93
(QUALITY)........................................................ 63
RECEIVING IMAGE FROM ANOTHER DEVICE
(INPUT SOURCE) ............................................ 63
SWITCHING EXTERNAL INPUT RECORDING
METHOD (PHOTO INPUT) .............................. 64
SELF-TIMER ....................................................... 64
SETTING ON-SCREEN DISPLAY OUTPUT ON
OR OFF (OSD OUTPUT) ................................. 65
DROP DETECTION (HDD PROTECTION)......... 65
Programme......................................................94
WHAT IS “PROGRAMME”? ................................94
SWITCHING TO THUMBNAIL DISPLAY OF
SPECIFIC DATE (SELECT) .............................94
PLAYING BACK PROGRAMME (PLAY).............95
CHANGING TITLE OF PROGRAMME
Disc Navigation
Using Disc Navigation......................................66
STARTING OR TERMINATING DISC
NAVIGATION.................................................... 66
PLAYING BACK FROM DISC NAVIGATION
SCREEN........................................................... 68
ADJUSTING VOLUME DURING PLAYBACK..... 68
PLAYING BACK LATEST RECORDED
SCENE ............................................................. 69
DELETING LAST RECORDED SCENE.............. 69
CAPTURING PHOTO.......................................... 70
SEARCH PLAYBACK OF MOVIE....................... 70
FRAME ADVANCE/FRAME BACK/SLOW
PLAYBACK OF MOVIE .................................... 70
SKIP PLAYBACK OF MOVIE.............................. 71
PLAYING BACK STILLS ..................................... 71
JUMPING TO SPECIFIED POINT (GO TO) ....... 72
INFORMATION DISPLAY DURING
PLAYBACK....................................................... 73
SELECTING MULTIPLE SCENES...................... 74
SELECTING CONSECUTIVE SCENES
(TITLE)..............................................................95
Play List ...........................................................97
WHAT IS “PLAY LIST”?.......................................97
CREATING NEW PLAY LIST (CREATE)............97
SWITCHING TO DISPLAY OF EACH PLAY LIST
(SELECT) .........................................................98
PLAYING BACK A PLAY LIST (PLAY)................98
ADDING SCENES TO PLAY LIST
(EDITING PLAY LIST)......................................99
DELETING SCENES FROM PLAY LIST
(EDITING PLAY LIST)....................................100
ADDING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ....................100
DELETING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ....................101
SELECTING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST) ....................101
ARRANGING ORDER OF SCENES (MOVE) ...102
CHANGING TITLE OF PLAY LIST (TITLE).......103
TOGETHER...................................................... 74
FUNCTIONS AVAILABLE WITH DISC
NAVIGATION.................................................... 75
UNDERSTANDING FLOW OF DISC
NAVIGATION MENU........................................ 76
DELETING PLAY LIST (DELETE).....................103
Go To.............................................................104
MOVING TO BEGINNING (END) OF HDD/DVD/
CARD..............................................................104
HDD/DVD/Card Management........................104
Dubbing on DVD..............................................79
FIRST-TIME (“NEW”) DUBBING......................... 80
DUBBING SCENES RECORDED ON SAME DAY
COLLECTIVELY (“DATE” DUBBING) .............. 81
DUBBING ALL SCENES RECORDED ON HDD
(DUBBING “ALL”) ............................................. 82
SELECTING SCENES RECORDED ON HDD AND
DUBBING THEM (SCENE “SELECT”
DUBBING) ........................................................ 83
TURNING OFF DUBBED MARK FROM
THUMBNAIL (MARK OFF)............................... 83
INITIALISING HDD/DVD/CARD ........................104
PROTECTION ...................................................105
VERIFYING REMAINING FREE SPACE ON DISC
OR CARD (CAPACITY)..................................105
UPDATING CONTROL INFORMATION OF HDD/
DVD-RAM/DVD-RW (VR-MODE) (UPDATE
CONTROL INFO.) ..........................................106
DELETING DATA ON HDD (FULL FORMAT)...106
FINALISING DVD-RW/DVD-R/+RW
(FINALIZE DVD) .............................................107
14
TOC
ADDITIONALLY RECORDING ON FINALISED
DVD-RW (VF-MODE)/+RW
(UNFINALIZE DVD)........................................108
Subsidiary Information
Introduction to Optional Accessories............. 137
CAMERA ACCESSORIES ................................137
POWER SUPPLY ..............................................137
Trouble Messages......................................... 138
Troubleshooting............................................. 145
System Reset................................................ 152
Major Specifications ...................................... 153
Others ............................................................109
DISPLAYING DUBBED/UNDUBBED SCENES IN
LIST (CATEGORY).........................................109
DISPLAYING MOVIES OR STILLS
INDEPENDENTLY (CATEGORY)..................109
PLAYING BACK SCENES REPEATEDLY
(REPEAT PLAY).............................................110
PLAYING BACK WIDE-MODE IMAGES ON 4:3
DISPLAY TV (TV TYPE).................................110
SLIDE SHOW (CONTINUOUS PLAYBACK OF
STILLS)...........................................................111
STORAGE CAPACITY OF HDD/DVD/CARD....155
RECORDABLE STILLS (PHOTOS)
ON CARD .......................................................156
Index.............................................................. 157
Viewing on TV Screen....................................112 Be sure to read the following before opening the
package of CD-ROM .................................. 159
CONNECTING TO A TV....................................112
VIEWING ON TV SCREEN ...............................113
Playback on DVD Recorder/Player................114
PLAYING BACK DVD-RAM/DVD-RW
(VR-MODE) ....................................................114
PLAYING BACK DVD-RW (VF-MODE)/DVD-R/
+RW................................................................114
Recording (Dubbing) Images .........................115
RECORDING (DUBBING) IMAGES FROM
OTHER VIDEO DEVICE.................................115
RECORDING (DUBBING) IMAGES ON OTHER
VIDEO DEVICES............................................117
Connecting to PC
Software Provided..........................................118
Requirements of available PC........................119
Installing Software..........................................120
Connecting to PC via PC Connection
Cable ...........................................................123
USING DISC IN DVD DRIVE BUILT
INTO PC .........................................................125
BEFORE TERMINATING PC CONNECTION
(UNPLUGGING PC CONNECTION CABLE)/
CHANGING OVER POWER SWITCH ...........126
Using ImageMixer 3 for Windows ..................127
VIEWING IMAGES RECORDED ON HDD/DISC
USING PC ......................................................127
CREATING DVD-VIDEO USING IMAGES
RECORDED ON HDD/DISC ..........................128
Using ImageMixer 3 Mac Edition for
DVDCAM.....................................................131
VIEWING IMAGES RECORDED ON HDD/DISC
USING MACINTOSH......................................131
IMPORTING IMAGES RECORDED ON HDD/
DISC INTO MACINTOSH...............................132
CREATING DVD-VIDEO USING IMAGES
RECORDED ON HDD/DISC ..........................133
Uninstalling Software .....................................135
Contact The Following ...................................135
Cautions when connecting DVD video camera/
recorder to PC .............................................136
15
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP07PW):
Portable power supply for this DVD video
camera/recorder. Charge it before use.
AC adapter/charger
(model DZ-ACS3 (SW)):
Used to power the DVD video camera/
DC power cord:
When powering the DVD video camera/
recorder from household AC outlet, use
recorder from AC outlet, or charge battery. this cord to connect the DVD video
camera/recorder and AC adapter/charger.
Mains lead:
Connect between household AC outlet and AC adapter/charger.
For China
1 cable included.
For regions other than China
3 cables included. Select an appropriate lead for your region.
AV/S input/output cable:
Used when viewing the picture played back Attach to the DVD video camera/recorder
on the DVD video camera/recorder on TV
screen, or input or output video from/to
another video device.
Shoulder strap:
Lens cap and lens cap string:
Attach the lens cap when not recording, to
protect the lens.
to hang it from shoulder.
Software CD-ROM:
Use this CD-ROM when connecting the
DVD video camera/recorder to PC.
PC connection cable:
Use this cable when connecting the DVD
video camera/recorder to PC.
Disc cleaning cloth:
Always use this to clean discs.
16
Names of Parts
5
4
1
2
3
6
7
8
(Inside the cover)
1
2
Hand strap attachment bracket (p. 20)
5
Zoom lever (p. 50, 52, 68)
To adjust the zoom or volume.
Stereo microphone
Take care that the microphone is not blocked
by a hand, etc., during recording.
6
7
8
PC connection terminal (TO PC) (p. 123)
AV input/output jack (p. 112, 115)
3
4
Recording indicator (p. 34, 40, 64)
The red indicator will light during recording.
Wide-screen colour liquid crystal display
(inside) (p. 31)
Optical 30× zoom lens (p. 50)
17
9
10
11 12 13
14
15
16 17
Viewfinder (p. 31)
18
19
20
21
9
16 BATTERY EJECT button (p. 27)
Press this button when removing the battery.
10 Dioptre control (p. 31)
17 Battery attachment platform (p. 27)
18 Record button (REC) (p. 40)
To adjust the focus of image appearing in the
viewfinder. (Pull out the viewfinder.)
11 SLEEP/RESTART button (p. 42)
To switch the sleep/restart status between
ON and OFF.
19 LOCK switch (p. 40)
It is recommended that you set the LOCK
switch to ꢆ (to the upper position) to prevent
the power switch in the “HDD” position
from accidentally moving to “DVD”.
12 ACCESS/PC indicator (p. 7, 40)
Will blink or light when the HDD/DVD is
accessed (write or read), or the DVD video
camera/recorder is connected to a PC.
20 Power switch (p. 30)
21 Hand strap (p. 20)
13 PHOTO/SELECT button (p. 41, 74, 92)
14 DISC EJECT button (p. 37)
Press down and release this button to open
the cover of DVD insertion block.
15 DVD insertion block (p. 37)
18
22
23
24
25 26 27 28
29
30
31
32 33 34 35
36
37
38
22 FULL AUTO button (p. 55)
31 DISPLAY (Screen display) button
(p. 43, 67, 73)
To switch the DVD video camera /recorder
to full automatic.
Press this button to display the details of
image being played back or camera setting
status, or switch the display off.
23 FOCUS button (p. 52)
To switch between manual focus and auto-
focus.
32 CARD ACCESS indicator (p. 7, 41)
33 QUICK MENU button (p. 48)
To display only the functions that you
frequently use (simple menus).
34 FINALIZE button (p. 107)
Press this button to finalise the recorded
DVD-RW/DVD-R/+RW.
24 MENU button (p. 32, 48, 85)
Press this button to display the menu for
setting camera functions and Disc
Navigation.
25 DISC NAVIGATION button (p. 66)
26 DUBBING button (p. 80)
35 Card insertion block (p. 39)
27 STOP/EXIT button (p. 11, 48, 69)
36 BLC (backlight compensation) button (p. 54)
Press this button when subject is being
lighted from rear.
To end playback or cancel setting of menu.
28 EXPOSURE button (p. 54)
37 2 / 1 / 0 / / / ꢇ buttons
Press this button to adjust the exposure.
(p. 32, 48, 52, 54, 69, 70, 71)
29 Speaker (p. 68)
Use these buttons to select a scene or menu item,
and then press the centre (ꢇ) to play back the
scene, or designate an option from the menu.
These buttons are also used to adjust the
exposure or focus.
30 RESET button (p. 152)
To reset all settings to defaults (status when
the DVD video camera/recorder was
shipped from the factory).
38 Tripod threaded hole
Used to attach the DVD video camera/
recorder to a tripod.
19
Setups
This section explains preparations for recording – setting up the DVD video camera/recorder
and battery.
Demonstration Function
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. ten
minutes after the DVD video camera/recorder, connected to the AC adapter/charger, is turned on and
left unoperated.
Refer to “CHANGING SETTING OF DEMONSTRATION” on page 34 if you
wish to view the demonstration immediately or change the setting to “Off”.
Setting Up the DVD Video Camera/Recorder
HOLDING DVD VIDEO CAMERA/RECORDER
Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.
Put your hand in a position where you can easily operate the REC button and the Zoom lever.
Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the
REC button with your thumb.
ATTACHING SHOULDER STRAP
Be sure to pass through the 2 slots.
Pass the shoulder strap through
the shoulder strap attachments.
20
ATTACHING LENS CAP
1
2
3
Attach the shorter end of lens cap string to
the lens cap.
Shorter end
Attach the longer end of lens cap string to the
hand strap of DVD video camera/recorder.
Longer end
Push the both sides of cap inward and attach
it over the lens.
Push and fit
Note:
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap
by hooking the tab inside the cap onto strap for
comfortable shooting.
21
HDD/DVD/Cards
The following table lists the storage media (discs and cards) that can be used on this DVD video
camera/recorder and the functions which are available with them:
Media
DVD-RW DVD-RW
SD
memory
card
Function
DVD-
RAM
HDD
(VR
(VF
DVD-R
+RW
mode)
mode)
To record video (p. 40)
To record photo (p. 41)
To dub on DVD (p. 79)
●
—
●
●
—
—
●
—
—
●
—
—
●
—
—
●
—
—
—
●
—
To delete image just
recorded (p. 69)
●
●
●
—
—
●
●
To select image and delete it
(p. 84)
●
●
●
●
●
●
—
—
—
—
—
—
●
To edit image (p. 85 – 86)
—
To play on other DVD players
and DVD recorders (p. 107)
*1
*1*2
*2
*2
*1*2
*3
—
∴
∴
●
●
∴
—
To use new disc or new card
without formatting
*4
*4
—
●
●
—
●
●
—
●
—
—
—
●
To initialise and reuse
(p. 104)
●
●
●
●
—
—
—
To additionally record on
finalised disc (p. 108)
*5
*5
—
—
●
●
To edit copied video on PC
(p. 118)
*6
*6
*6*7
*6*7
*6*7
*6*7
●
●
●
●
●
●
To playback video on PC
(p. 118)
*6
*6
*6*7
*6*7
*6*7
*6*7
●
●
●
●
●
●
●: Functions available; —: Not available
*
1: Playable on devices that conform to either 8 cm DVD-RAM, 8 cm DVD-RW (VR mode) or 8cm +RW.
2: Must be finalised. Cannot be played on some DVD players or DVD recorders.
3: Some DVD devices conform to SD memory card.
*
*
*
4: When media that are sold “formatted” are used. If the initialisation format differs, the media can be initialised on
this DVD video camera/recorder and then used.
*
*
*
5: To additionally record, the finalised disc must be unfinalised.
6: The provided software is used.
7: Finalise the disc when editing/playing back on PC.
22
HDD, DISCS
HDD, and usable discs and marks (logos)
Function
Allows extensive recording (approx. 11 hours in FINE
mode).
HDD
Allows you to delete unnecessary scenes or edit
scenes.
Allows you to delete unnecessary scenes or edit
scenes.
DVD-RAM Ver. 2.1 (8 cm)
Allows you to choose the VR mode for deleting
unnecessary scenes or editing scenes, or the VF
DVD-RW
mode in which deletion or editing is not possible, but
[Ver1.1 (8 cm) 2x speed (2x/1x)]
*1
high compatibility with DVD players is provided
.
*1
Provides high compatibility with DVD players . No
deletion or editing is possible.
DVD-R
[for General Ver. 2.0 (8 cm)]
Provides high compatibility with DVD players but does
*2
not need to be finalised . Scenes can be deleted
+RW Ver. 1.2 (8 cm)
immediately after being recorded.
*
1: Playback on all DVD players is not guaranteed. The disc must be finalised before being played back on a DVD player.
*
2: Playback on all DVD players is not guaranteed.
Note:
This DVD video camera/recorder can use only the 8-cm bare discs not packed in a square cartridge, square caddy
•
case or round DVD holder. The discs in a square cartridge, square caddy case or round DVD holder can be used if
they are removed from the package, but take great care not to dirty or scratch the bare disc.
• It is recommended that you use Hitachi Maxell HG type single-sided discs, since their compatibility with this
DVD video camera/recorder has been confirmed.
When using an HG type double-sided disc, take great care with handling it. Using a disc other than these discs may
not allow the DVD video camera/recorder to deliver optimum performance.
INFORMATION ON DVD-R
For optimum recording on DVD-R, this DVD video camera/recorder writes control data to the disc
in order to automatically make adjustments when it is inserted and ejected accompanying recording.
If the disc has no area to be written for adjustment, recording may not be possible. To prevent this,
do not insert or eject a DVD-R accompanying recording more than 100 times.
This DVD video camera/recorder cannot record a DVD-R in the VR mode.
NOTES ON FINALISATION
• Do not insert a DVD-RW/DVD-R recorded or dubbed on this DVD video camera/recorder but not
finalised, into a recordable device, such as a DVD recorder: The recorded data may be damaged.
• Use only DZ-HS500SW to record/dub or finalise a DVD-RW (VF-mode)/DVD-R/+RW recorded
or dubbed on this DVD video camera/recorder but not finalised: Using any other device could
damage the data recorded on the disc.
• DVD-RW/DVD-R/+RW edited and finalised on PC or those finalised on another DVD recorder
may not be playable on this DVD video camera/recorder, depending on the editing software used
or recorded status of DVD-RW/DVD-R/+RW.
• If you insert a DVD-R recorded on a DVD video camera/recorder other than DZ-HS500SW and
not finalised, the Disc Navigation screen will automatically start, and no recording can be done on
the disc nor can it be finalised.
• Do not insert a DVD-RW/DVD-R that was recorded by a DVD recorder manufactured by a
company other than Hitachi, and which has not been finalised, in this DVD video camera/
recorder: Doing so will make the disc unusable.
23
EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO
CAMERA/RECORDER
• CD
• CD-R
• CD-RW
• CD-ROM
• DVD-R DL (Dual Layer)
• DVD-RW DL (Dual Layer)
• +R DL (Double Layer)
• +RW DL (Double Layer)
• +R
• DVD-ROM
• DVD-Video
• Discs other than those with diameter of 8 cm
• DVD-R (4.7 GB) for Authoring Ver. 2.0
AVAILABLE CARDS
SD memory cards can be used on this DVD video
camera/recorder (incompatible with 2 GB).
When using an exclusive adapter, a miniSD
memory card and micro SD memory card can be
used in the same way as an SD memory card.
No SDHC card or multimedia card can be used.
CAUTIONS FOR DISC AND CARD
• It is recommended that you create a backup
file for valuable data on hard disk of PC.
• Do not do the following, or the data on disc or
card may be damaged or lost:
− Do not remove the disc or card or turn DVD
video camera/recorder off during reading or
writing of data
− Do not use DVD video camera/recorder in a
place subject to static electricity or electrical
noise
− Do not have printing done at a print lab or
DPE service
− Do not leave a DVD unused in the DVD
video camera/recorder for a long time
●Handling card
• Do not use cards other than
the designated ones.
• Be sure to perform trial
recording before recording
vital images.
• Do not touch the card
terminal or allow it to touch
Terminal
metal.
• Do not paste anything other
Note:
than exclusive label on label pasting portion.
• Do not subject card to impact, bend or drop it.
• Do not disassemble card or modify it.
• Do not expose card to water.
• Do not use or store card in the following
places:
− Where the temperature is high, such as in
vehicle at high temperatures, under burning
sun or near a heater
− Where humidity is high, or in dusty place
• When the erasure prevention switch is locked,
no recording, deletion or editing will be
possible on the card: Only playback will be
possible.
•
This DVD video camera/recorder can play back image
data recorded on other digital cameras conforming to
the DCF (Design rule for Camera File system) standard.
The range of image data playable on this DVD video
camera/recorder is that with pixels from 80 horizontal ×
60 vertical to 4000 horizontal × 3000 vertical.
• DCF is an integrated image file format of digital
cameras: Image files can be used on all digital
devices conforming to DCF.
• Image data edited on PC and certain types of image
data may not be visible on this DVD video camera/
recorder.
• The image data recorded on another device may not
be playable on this DVD video camera/recorder.
Erasure prevention
switch
Locked status
24
Preparations for Power Supply
USING DVD VIDEO CAMERA/RECORDER WITH AC ADAPTER/CHARGER
It is recommended that you use the AC adapter/charger to power the DVD video camera/recorder
from household AC outlet when you perform settings on it, play back or edit images, or use it
indoors.
Note:
Be sure to use the specified AC adapter/charger (DZ-ACS3 (SW)) to power the DVD video camera/recorder. Using
other AC adapter/chargers could cause electric shock or result in fire.
Mains lead
To AC outlet
* The shape of plug
varies depending
on the model.
AC adapter/charger
DC power cord
1
Connect the mains lead to AC adapter/
charger.
2
3
Plug the mains lead into AC outlet.
Plug one end of DC power cord into the DC
output jack on AC adapter/charger.
4
Attach the other end of DC power cord to the
battery attachment platform on DVD video
camera/recorder.
Use the same procedure as that for battery
when attaching and detaching the DC power
cord: See page 27.
25
Setting Up the Battery
The DZ-BP07PW battery (provided) has not been charged at purchase time: Charge it before using
the DVD video camera/recorder.
Note:
• Be sure to use the DZ-BP07PW, DZ-BP14SW (optional) or DZ-BP7SW (optional) battery for the DVD video
camera/recorder: Using other batteries could cause the DVD video camera/recorder to malfunction, or result in
fire.
• Be sure to use the DZ-ACS3 (SW) AC adapter/charger to charge the battery: Using other chargers could cause
electric shock or fire.
• Charge the battery at temperatures of 10 – 30ºC.
• If the CHARGE indicator does not light when the AC adapter/charger is plugged into AC outlet, unplug it from the
AC outlet, wait a few moments, and then plug it into the AC outlet again. If the CHARGE indicator still does not
light, the AC adapter/charger may be faulty. Unplug it from the AC outlet and consult your dealer.
• The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries.
If you need one, purchase it from your local electronics distributor.
CHARGING BATTERY
Use the provided AC adapter/charger to charge the battery.
1
2
Connect the mains lead to AC adapter/
charger.
3
Attach the battery to AC adapter/charger.
Note:
When charging a battery, unplug the DC power cord
from the DC output jack on AC adapter/charger.
Plug the mains lead into AC outlet.
Battery
Mains lead
To AC outlet
CHARGE indicator
AC adapter/charger
* The shape of plug
varies depending
on the model.
DC output jack
26
●Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/
charger:
Charge status
During charge
CHARGE indicator
Lit
Charge complete
Goes out
Note:
See “Troubleshooting” on page 145 when the CHARGE indicator blinks.
●Reference for time required to charge battery (at approx. 25ºC)
DZ-BP07PW (provided)/DZ-BP7SW (optional): Approx. 90 minutes
DZ-BP14SW (optional): Approx. 165 minutes
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1
Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.
Note:
• Make sure that the battery is in the correct orientation.
• Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.
Terminal
side must be
down.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1
While holding down the BATTERY EJECT
button, slide the battery upward to remove it.
Note:
• For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
• Be careful not to drop the removed battery.
• If the battery remains attached, minute level current
will flow even if the DVD video camera/recorder is off,
and the battery will discharge.
• Set the power switch to OFF before removing the
battery.
27
●Continuously recordable time with fully charged battery (with no zoom
operation, etc.)
See the following table as a reference for how long the DVD video camera/recorder can
continuously be used with a fully charged battery:
With DZ-BP07PW (provided)/DZ-BP7SW (optional)
Continuous use time
Video mode
HDD
DVD
When using viewfinder
When using LCD monitor
When using viewfinder
When using LCD monitor
When using viewfinder
When using LCD monitor
approx. 100 min
approx. 90 min
approx. 100 min
approx. 90 min
approx. 85 min
approx. 75 min
approx. 85 min
approx. 75 min
XTRA
FINE
STD
approx. 100 min approx. 100 min
approx. 90 min
approx. 85 min
With DZ-BP14SW (optional)
Video mode
Continuous use time
HDD
DVD
When using viewfinder
XTRA
approx. 200 min approx. 170 min
approx. 180 min approx. 150 min
approx. 200 min approx. 170 min
approx. 180 min approx. 150 min
approx. 200 min approx. 210 min
approx. 180 min approx. 170 min
When using LCD monitor
When using viewfinder
FINE
When using LCD monitor
When using viewfinder
STD
When using LCD monitor
• The time is only for reference: It will vary depending on recording contents.
The reference for how long the DVD video camera/recorder can actually be used
will be approx. 1/2 to 1/3 of the above time:
The continuously recordable time of DVD video camera/recorder in the above table shows the time
available when the DVD video camera/recorder is in the recording mode without using any other
function after recording is started. In actual recording, the battery will discharge 2 – 3 times faster
than this reference, since the REC button and zoom are being operated, and playback is performed.
Assume that the actually recordable time with a fully charged battery is between 1/2 and 1/3 of the
above time, and prepare enough batteries to allow for the time you are planning to record on the
DVD video camera/recorder.
The continuously recordable time may be less depending on the conditions when the DVD video
camera/recorder is used (if recording and recording pause are repeated at short intervals, etc.).
Note that the battery discharges faster in cold places.
Note:
• See “Troubleshooting” on page 145 when charging is not possible.
• The charge time will vary depending on the battery remaining level.
• During and after charging, and when the DVD video camera/recorder is being used, the battery will be warm, but
this does not indicate a fault.
• A battery cannot be charged while the DC power cord is connected to the DC output jack of AC adapter/charger:
Unplug the DC power cord when charging a battery.
• Charge the battery at ambient temperature 10ºC to 30ºC: Charging at temperatures other than this range could
damage the battery.
28
BATTERY REMAINING LEVEL INDICATOR
When the battery is used to power the DVD video camera/recorder, the battery remaining level
appears in the viewfinder or on the LCD screen as follows:
Fully charged
Nearly empty
White portion shows remaining level
(Blinks)
EFFICIENT USE OF BATTERY
• The battery will slightly discharge even if it is
detached from the DVD video camera/
recorder.
Battery life:
The battery life varies greatly depending on the
ambient environment and how often the DVD
video camera/recorder is used. If the usable
time of DVD video camera/recorder with a fully
charged battery is noticeably short, the battery is
probably dead: Purchase a new one.
•
If the battery is left attached to DVD video
camera/recorder, it will consume a slight
amount of power. Therefore, it is
recommended that you charge the battery
shortly before using the DVD video camera/
recorder, usually on the day before you plan to
use it.
Power save and discharge of battery:
It is recommended that you turn the DVD video
camera/recorder off in status other than
recording, since even during recording pause
battery power is consumed at the same level as
during recording.
If, when you specify Power Save On, the
recording pause status continues for
approximately 5 minutes, the DVD video
camera/recorder will automatically turn off.
To set or release power save, see “TURNING
DVD VIDEO CAMERA/RECORDER OFF
AUTOMATICALLY (POWER SAVE)” on
page 33.
When not using the DVD video camera/
recorder for an extended period:
It is recommended that you fully charge the
battery once a year, attach it to DVD video
camera/recorder and use it up; then remove the
battery and store it in a cool place again.
29
Turning DVD Video Camera/Recorder On and
Off
While holding down the grey button at the right
of power switch, set the switch according to
each recording function:
Note:
• Once you turn the DVD video camera/recorder on to
let it recognise the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
“Troubleshooting” on page 145).
Set to “OFF”:
The DVD video camera/
recorder will turn off
Set to “SD”:
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to “Trouble Messages”
on page 138 and take corrective action.
To record photos on an SD
memory card and play
them back
Set to “HDD”:
• When turning the DVD video camera/recorder off or
changing over the power switch between “HDD” and
“DVD”, you will not need to hold down the grey button:
Simply move the power switch.
To record or dub movie on
HDD and play it back
Set to “DVD”:
To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW and play it back
P
Power switch
30
Viewing Images
VIEWING IMAGE ON LCD MONITOR
VIEWING SUBJECT THROUGH
VIEWFINDER
SCREEN
If you open the LCD monitor, you can monitor
subject image on the LCD screen.
1
2
Pull out the viewfinder.
1
Open the LCD monitor.
Turn the dioptre control knob to adjust the
focus to suit your eyesight.
The LCD monitor has a portion where you
can hook your finger. Hook the finger there to
open the monitor.
Note:
• If no image appears in viewfinder, refer to
“Troubleshooting” on page 145.
●Range where the LCD monitor can
be moved
• If the LCD monitor is opened approximately 90º, the
viewfinder will be off: Turn the open LCD monitor 180º
so that it faces the same direction as the lens; the
image will appear in the viewfinder.
• Focusing will not be correct unless the viewfinder is
pulled out.
• See “LCD/EVF Setup” (on page 36) if you wish to
display images in the viewfinder regardless of
whether you open or close the LCD monitor.
The LCD monitor can be opened up to
approximately 90º.
If the LCD monitor is open 90º, it can be tilted
with the screen down as much as 90º, and can
also be tilted with screen up and turned up to
180° so the screen faces in the same direction as
the lens.
Dioptre control
Viewfinder
If the LCD monitor is turned 180º so the screen
faces in the same direction as the lens during
recording, subject image will also appear in the
viewfinder as a mirror image (left/right
reversed).
Tilt the LCD monitor to adjust its vertical angle
so that you can see the screen easily.
Note:
• If no image appears on LCD monitor screen, refer to
“Troubleshooting” on page 145.
• If LCD monitor lights white, refer to page 57.
• Be sure to open the LCD monitor approximately 90º
before changing its vertical angle.
Pull out the viewfinder
until a click is heard.
• Do not record for a prolonged time with the LCD
monitor turned approximately 180º in close contact
with the DVD video camera/recorder body: Doing this
could cause the DVD video camera/recorder and LCD
monitor to become hot.
180º
90º
Hook your finger
(Bottom)
31
HDD
ꢁꢂꢃ
ꢄꢅ
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
Use 2 / 1 / 0 / / buttons
to select, and then press ꢇ to
designate.
10// buttons to choose “Date Set” on the
Press the MENU button, use the 2/1/
Press the 2 or 1 button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
“Date Setup” menu screen.
Note:
To stop date/time setting midway, press the ꢀ
2
Press the / button.
Da t e Se
Da t e Se
Da t e Mode
t
u p
t
1
/
1
/
2007
00
button.
0
:
The figure for the day
will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
4
5
After setting the current
date and time, press the
ꢇ button.
Da t e Se
t
ENTER
RETURN
1 / 3 / 2007 8 : 00
Da t e se t up?
YES
NO
ENTER
The screen for verifying
the set date will appear.
Note:
If the displayed date and time are correct,
press the 0 button to choose “YES”, and
then press the ꢇ button.
After setting the figure for the day, press the /
button to select the digit to be set. If you press the
ꢇ button after selecting the figure for the day, the
screen for verifying the set date will appear instead
of screen for setting month, year or time.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
3
Press the 0 or /
Da t e Se
Da t e Se
Da t e Mode
t
u p
t
1
/
3
/
2007
00
button to select the digit
you want to set in
sequence.
0
:
Choosing “NO” will restore the menu screen.
ENTER
RETURN
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: day/month/year, month/day/year or year/
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
Note:
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, every 6 months, connect the AC
adapter/charger to DVD video camera/recorder and connect them to AC outlet, or attach a charged battery to the
DVD video camera/recorder, and leave it for at least 24 hours with the DVD video camera/recorder turned off: The
built-in battery will recharge.
32
HDD
ꢁꢂꢃ
ꢄꢅ
Initial Settings
Press the MENU button, and then use 2/1/0///ꢇ buttons to display the “Initial Setup”
menu screen. See page 48 for detailed operation procedure. Press the MENU button again to exit
setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select “On” or “Off”, and
then press the ꢇ button.
On: Beep will be heard
when the power
Note:
I
n
Be
Po w e r
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
i
t
e
i
p
a
l
S e t u p
On
Of
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
S
a v e
f
ENTER
RETURN
switch is changed
over, the REC button is pressed when
HDD/disc is used, the SLEEP/RESTART or
DISC EJECT button is pressed, etc.
Off: No beep is heard.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select “On” or “Off”, and
then press the ꢇ button.
On: To engage power
save. If the DVD
Note:
I
n
Be
Po w e r
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
i
t
e
i
p
a
l
S e t u p
On
Of
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to
“HDD”, “DVD” or “SD”.
S
a v e
f
ENTER
RETURN
video camera/
• The Power Save setting will not appear in the on-
screen information display.
• If the sleep/restart standby status continues for 30
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the menu and information.
The following shows that English is changed to French.
1
2
Press ꢇ or / button
with the screen shown
on the right displayed:
The “Language” screen
will appear.
Note:
I
n
Be
Po w e r
R e c o r d LED
L an gu age
Demo Mode
Reset
i
t
e
i
p
a
l
S e t u p
a v e
On
O f
On
En g
Au
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
S
f
l
o
i
s h
t
ENTER
RETURN
Choose “Français”, and
then press ꢇ button.
The display will change
to French.
L an gu age
En g
Español
ano
l
i
s h
F r ança
i
s
D e u t s c h
I
t
a
l
i
ENTER
RETURN
33
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory (p. 152)). (Note, however, that
the date/time will not be reset.)
1
Choose “Reset” on the
“Initial Setup” menu
screen, and then press
the ꢇ button.
2
If you are sure that you
wish to reset, use the
0 button to choose
“YES”, and then press
the ꢇ button.
I
n
Be
Po w e r
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
i
t
e
i
p
a
l
S e t u p
a v e
Re s e t
On
Off
On
English
S
Re s e t
?
Auto
YES
NO
ENTER
ENTER
RETURN
The screen for verifying reset will appear.
The setting items have now been reset to
defaults.
Note:
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the ꢀ button.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select “On” or “Off”, and
then press the ꢇ button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
Note:
I
n
Be
Po w e r
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
i
t
e
i
p
a
l
S e t u p
a v e
On
• The Record LED setting will not appear in the on-
screen information display.
S
Of
f
• The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
ENTER
RETURN
• Even if “Record LED: Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING SETTING OF DEMONSTRATION
Choose the desired option
using the screen on the
right, and then press the
ꢇ button.
Note:
I n i
Beep
t
i
a l S e t u p
A u t o
O f
S t a r
• If “Auto” is specified, the demonstration will not start if
a battery is connected.
Power Save
Re c o r d LED
Language
Demo Mode
Reset
f
t
• Pressing the ꢀ (STOP/EXIT) or DISC NAVIGATION
ENTER
RETURN
button will exit demonstration.
• If “Auto” is specified, the demonstration will not start
when the power switch on this DVD video camera/
recorder is set to “DVD” and a DVD is loaded, or when
the power switch is set to “SD” and a card is loaded.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC.
• While the demonstration is being given, the recording
indicator will blink.
Auto: To start demonstration if the DVD
video camera/recorder connected to
AC adapter/charger is inactive for
approx. 10 minutes or more after it is
turned on.
Off:
To set demonstration to off.
Start: To start demonstration immediately.
34
HDD
ꢁꢂꢃ
ꢄꢅ
LCD/EVF Setup
ADJUSTING BRIGHTNESS OF LCD SCREEN (LCD BRIGHTNESS) AND
VIEWFINDER (EVF BRIGHTNESS)
10///ꢇ buttons to choose “LCD/EVF
Press the MENU button, use the 2/1/
3
Press the ꢇ button to end the setting.
Adjust” on the “LCD/EVF Setup” menu
screen, and then choose “LCD Brightness”or
“EVF Brightness”.
Note:
• To stop the setting midway, press the MENU button.
• The brightness setting will be stored in memory even
after the DVD video camera/recorder is turned off.
The brightness adjustment bar will appear on
the screen.
2
Use the 0// buttons
LCD/ EVF Ad j u s t
LCD Br
i
gh t n e s s
for adjustment.
EVF Br
i
gh t n e s s
Co l o u r L ev e
ADJUST
l
Press 0 :
ENTER
The screen becomes
dimmer.
Brightness
adjustment bar
Press / :
The screen becomes
brighter.
35
ADJUSTING COLOUR DENSITY (COLOUR LEVEL)
You can adjust the colour density of the LCD monitor screen and viewfinder.
1
Press the MENU
3
Press the ꢇ button to end the setting.
LCD/ EVF Se t up
LCD/ EVF Ad u s
EVF s p l a y
j
t
button, use the 2/
1/0///ꢇ
buttons to choose
“LCD/EVF Adjust” on
the “LCD/EVF Setup” menu screen, and then
choose “Colour Level”.
Note:
D
i
Au t
o
• To stop the setting midway, press the MENU button.
• The colour setting will be stored in memory even after
the DVD video camera/recorder is turned off.
• Even if the brightness or density of LCD monitor
screen or viewfinder is changed, the brightness or
density of the recorded image itself will not change.
ENTER
RETURN
The colour density adjustment bar will
appear on the screen.
2
Use the 0// buttons
LCD/ EVF Ad j u s t
LCD Br
i
gh t n e s s
for adjustment.
EVF Br
i
gh t n e s s
Co
l
ou r L ev e
ADJUST
l
Press 0 :
ENTER
For lighter colour.
Press / :
Colour density
adjustment bar
For denser colour.
ALWAYS DISPLAYING IMAGE IN VIEWFINDER
1
Press the MENU
2
Choose “On” and press the ꢇ button.
Auto: If the LCD monitor is open, no image
will appear in the viewfinder.
On: Images will always appear in the
viewfinder regardless of whether the
LCD monitor is open/closed.
LCD/ EVF Se t up
LCD/ EVF Ad u s
EVF s p l a y
j
t
Au t
On
o
button, use the 2/
D
i
1/0///ꢇ
buttons to choose “EVF
Display” on the “LCD/
EVF Setup” menu screen.
ENTER
RETURN
Note:
The setting on EVF Display will be stored in memory
even after the DVD video camera/recorder is turned off.
36
ꢁꢂꢃ
ꢄ
Inserting and Removing Disc
1
Set the power switch to “DVD” or “OFF” .
When removing the disc:
While pushing down the centre portion of
turntable, pick up the disc, holding its edge,
to remove it.
When the power switch is set to “HDD” or
“SD”, the cover of DVD insertion block will
not open. When “Please insert DVD.” appears
during dubbing, however, the cover of DVD
insertion block will open even when the
power switch is set to “HDD” (see p. 79).
Turntable
2
3
Press down the DISC EJECT button once and
release it.
A few moments after the ACCESS/PC
indicator blinks, the cover of DVD insertion
block will open.
Gently open the cover by hand fully until it
stops.
Pickup lens
• Note that the recording surface of disc must face
the inside of DVD video camera/recorder. When
using a single-sided disc, the recording surface is
the side without label.
• Never touch the disc recording surface or pickup
lens. Touching the pickup lens could cause a fault.
• Use the disc cleaning cloth provided to wipe off
any dirt adhering to the disc recording surface.
• Do not use a dirtied or scratched disc.
4
When inserting a disc:
Push the disc against the turntable at the
centre to lock it until a click is heard.
5
Push the section marked “PUSH CLOSE” on
the cover of DVD insertion block, to close the
cover.
Then the DVD video camera/recorder will
automatically recognise the disc: While the
ACCESS/PC indicator is lit, do not cut off the
power supply, and do not subject the DVD
video camera/recorder to any vibrations or
impact.
Push the shaded
portion.
37
Note:
If the cover of DVD insertion block is open, the ACCESS/PC indicator will blink when an image is displayed on the LCD
•
monitor screen: In this case, the DVD video camera/recorder will not turn off even if the power switch is set to “OFF”.
If the cover remains open after a while, the DVD video camera/recorder will automatically turn off.
• Disc cannot be inserted or removed unless a charged battery or AC adapter/charger is connected to the DVD
video camera/recorder.
• If there is some delay before recording starts, refer to “Troubleshooting” on page 145.
• Do not close the cover if a disc is not properly loaded on the turntable.
• If a single-sided disc is inserted into DVD video camera/recorder with the printed label facing the inside, an error
message will appear. Remove the disc and reinsert it with its recording side facing the inside. See “Trouble
Messages” on page 138.
• Do not remove the battery or disconnect the AC adapter/charger during removal of the disc or until power is
completely turned off: If you do, the disc cover will not open. If this happens, reattach the battery or AC adapter/
charger, push down the DISC EJECT button once, and then release it.
• Do not insert anything other than the 8 cm DVD-RAM/DVD-RW/DVD-R/+RW into the DVD insertion block: Doing
so could cause malfunctions.
• When inserting or removing the disc, BE SURE NOT to look into the lens in laser pickup: Doing so could damage
your eyesight.
• Close the cover of DVD insertion block gently: Using force could cause a fault.
• When using double-sided disc
Recording is possible on both sides of double-sided disc. However, when recording or playback on one side is
finished, recording or playback will not move automatically to the other side. Remove the disc once from the DVD
video camera/recorder, turn over the disc and insert it again for continued use.
The recording surfaces of double-sided disc are likely to become dirtied or scratched: Always make sure that
there is no dirt or scratch on the recording surface facing the pickup lens, and then use the disc taking great care
that it is not dirtied or scratched. Use the provided disc cleaning cloth to wipe off any dirt on disc (see page 10).
●When using brand-new DVD-RW/+RW
When a disc is first loaded in the DVD video camera/recorder, the “Format DVD” screen will
appear.
When recording on this DVD video
camera/recorder:
When recording data from PC:
While the “Format DVD” screen is displayed,
choose “No” and then press ꢇ button, or
press the ꢀ button.
Choose “Yes” on the “Format DVD” screen, and
then press ꢇ button.
However, if data from PC has not yet been
recorded, the disc can be made usable on this
DVD video camera/recorder. When inserting
the disc into this DVD video camera/recorder,
the same message will appear: If you wish to use
it on this DVD video camera/recorder, choose
“YES”.
When using DVD-RW, choose the recording
format (VR or VF mode), and then press the
ꢇ button.
The disc will be formatted.
F o r
m
a t D V D
F o r
m
a t D V D
D V D i s n o t f o r m a t t e d .
F o r m a t t h e D V D n o w ?
D V D F o r m a t .
Se l ec
t
r
ec o r d
f
o r
m
a t .
YES
NO
VR
M
o de
VF
M
o de
ENTER
ENTER
(When using DVD-RW)
38
ꢅ
Inserting and Removing Card
1
2
3
4
Open the LCD monitor.
Turn the DVD video camera/recorder off.
Open the cover of card insertion block.
Inserting Card:
Insert card with its terminal inward until it
locks.
Removing Card:
Push the centre of card edge.
The card will come out so that it can be held
by fingers.
5
Close the cover of card insertion block.
Note:
• Always close the cover of card insertion block: Placing
the DVD video camera/recorder on a desk, etc. with
cover open could damage the cover.
39
Basic Techniques
This section explains about recording of movies and still images, and also basic settings on
DVD video camera/recorder.
HDD
ꢁꢂꢃ
ꢄ
Recording Movie
• When setting the power switch to “DVD”, insert a recordable DVD-RAM/DVD-
RW/DVD-R/+RW into this DVD video camera/recorder.
Before You Begin
Note:
Pressing REC
once will start
recording;
pressing it once
again will
• See “Troubleshooting” on page 145 when recording
ACCESS/PC
indicator
movie is not possible.
• See “Troubleshooting” on page 145 if it takes some
time before recording is possible.
• See “Troubleshooting” on page 145 if the DVD video
camera/recorder does not operate.
temporarily stop
recording.
• See page 43 for on-screen information display.
• It is recommended that you set the LOCK switch to ꢆ
(the upper position) to prevent the power switch in the
“HDD” position from accidentally moving to “DVD”
position.
• When using a DVD-RW (VF-mode)/DVD-R, videos of
different qualities (VIDEO Modes) or 16:9 On and Off
cannot be recorded or dubbed on the same disc (see
page 79).
• While the ACCESS/PC indicator is lit or blinking, do
not turn the DVD video camera/recorder off, and take
care not to subject it to any vibration: Doing so could
cause an error in the recorded data, which could
make it unplayable (see page 7).
1
2
Remove the lens cap, and then point the DVD
video camera/recorder at subject.
Turn the DVD camera/recorder on.
Set the power switch to “HDD” or “DVD” to
turn the DVD video camera/recorder on.
After the ACCESS/PC indicator goes out,
perform the subsequent operation:
• The minimum recordable time of movie is
approximately 3 seconds.
• Hitachi cannot be responsible for video and audio that
cannot be recorded or edited because of any defect.
• Each time the DVD video camera/recorder enters the
recording pause status, the counter display will be
reset to “00:00:00”.
• After recording for 9 hours when using HDD, the DVD
video camera/recorder will automatically stop
recording: After approx. one minute, it will
automatically restart recording (no scene will be
recorded during this recording pause). As a result,
multiple thumbnails will appear for the scene recorded
continuously for more than 9 hours, even with one-
time recording of that scene. Mark “:” will
continue to appear on the screen while the DVD video
camera/recorder is automatically pausing when it has
continued recording for more than 9 hours.
3
4
Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, close the LCD
monitor before pulling out the viewfinder.
Press the REC button.
The “9” mark in the viewfinder or on the
LCD screen will change to the “:” mark,
and recording will start.
During recording, the recording indicator on
the front of DVD video camera/recorder will
light.
Pressing REC again during recording will set
the DVD video camera/recorder to the
recording pause status.
5
When recording is finished, turn the DVD
video camera/recorder off.
40
ꢅ
Recording Stills
5
Press the PHOTO/SELECT button all the way
(full pressing).
Note:
Recording of still images is possible on card.
The screen will be black, and then the
recorded still will be displayed. When the
“9” mark appears, you can proceed with
the next recording; while “CARD ACCESS” is
being displayed, you cannot proceed with the
next recording.
PHOTO/SELECT
button
Note:
• If you wish to record without locating a subject at the
centre of screen, first locate the subject at the centre
of screen, press the PHOTO/SELECT button halfway
down, determine the composition to be recorded, and
then press the PHOTO/SELECT button all the way
down.
• If you press the PHOTO/SELECT button all the way
down at one stroke without pressing it half way,
recording will be possible, but the focus may be
incorrect.
• See “Size And Quality Of Photos” on page 156 for
details of photos on card.
CARD ACCESS indicator
• See “Troubleshooting” on page 145 if recording
photos is not possible.
• If focusing is difficult with auto focus, choose manual
focus, and manually correct the focus before
recording (see page 52).
1
2
Remove the lens cap, and then point the DVD
video camera/recorder at subject.
Turn the DVD camera/recorder on.
Set the power switch to “SD”.
• Shake of the DVD video camera/recorder may cause
blur in recorded image.
• When holding the DVD video camera/recorder for
recording, grasp it securely with both hands.
• When recording with higher zoom magnification, it is
recommended that you secure the DVD video
camera/recorder on a tripod.
After the CARD ACCESS indicator goes out,
perform the subsequent operation:
• There may be a difference between the image you
see on the LCD screen or viewfinder and the
recorded image.
3
4
Check the subject on the screen (viewfinder
or LCD).
When using the viewfinder, pull it out and
close the LCD monitor.
Press the PHOTO/SELECT button half way
(half pressing).
The DVD video camera/recorder will
automatically focus on the subject at the
centre of screen, and the “9” indicator on
screen will light in purple (the focus will not
change when manual focus is chosen).
41
HDD
ꢁꢂꢃ
ꢄꢅ
Swift Restart of Recording (SLEEP/RESTART
button)
If you press the SLEEP/RESTART button while in the recording pause status instead of turning the
DVD video camera/recorder off, the status that recording is possible will be restored in approx. 1.5
seconds.
Setting to the sleep/restart standby
status:
Press the SLEEP/RESTART button in the
recording pause status.
The SLEEP/RESTART button will light, and the
DVD video camera/recorder will enter the
sleep/restart standby status.
In the following cases, pressing the SLEEP/
RESTART button will not set the DVD video
camera/recorder to the sleep/restart standby
Note:
• If you press the REC or PHOTO/SELECT button while
in the sleep/restart standby status, the sleep/restart
status will be released, but recording of a video or
photo will not start. To record, press the REC or
PHOTO/SELECT button again.
• After the DVD video camera/recorder is restored from
the sleep/restart standby status, the zoom position
will return to 3x. The settings on manual focus,
exposure and rear lighting will also reset to the initial
values.
• The DVD video camera/recorder in sleep/restart
standby status consumes approx. half the power it
does during ordinary recording, but the recordable
duration in that status will be longer than standing by
in the recording pause status.
• If the sleep/restart standby status continues more
than 30 minutes, the DVD video camera/recorder will
turn off regardless of the Power Save setting (leaving
the DVD video camera/recorder in recording pause
status for 5 minutes will also turn it off: Default).
• Setting the power switch to OFF in the sleep/restart
standby status will turn the DVD video camera/
recorder off.
status:
• No disc is loaded although the power switch is set to
“DVD”.
• No card is loaded although the power switch is set to
“SD”.
• An unusable disc or card is loaded.
• The HDD or a loaded DVD or card has no remaining
free space.
• The Disc Navigation screen is being displayed.
• During playback.
Restoring from sleep/restart standby
status:
Press the SLEEP/RESTART button that is lit:
The DVD video camera/recorder will return to
the recording pause status.
SLEEP/RESTART button
Pressing the REC or PHOTO/SELECT button
will also restore the DVD video camera/
recorder to recording pause from the sleep/
restart standby status.
The following operation will release the sleep/
restart standby status:
• Press down the DISC EJECT button.
• Change over the power switch (“HDD”↔“DVD”).
42
HDD
ꢁꢂꢃ
ꢄꢅ
On-Screen Information
Various types of information will appear in the viewfinder or on the LCD screen during recording.
INFORMATION DISPLAY DURING RECORDING
See the next page for details.
2. 16:9 mode
C
7. Microphone filter
8
@
A
=
3. Programme AE
4. Backlight compensation
5. EIS
8. Self-timer
9. External Input
6. White balance
10. Recording status
REC
L IN
1. Recording mode
0 0 : 0 0 : 0 0
1 0 REM 3 0 MIN
REM 1 4 Scene
j
Movie recording time
17. Remaining space
on HDD/DVD/Card
18. Remaining number
of recordable scenes
19. Remaining
FULL AUTO
HDD ACCESS
11. Zoom
VOLUME
8 : 0 0
12. Exposure correction
FINE
1 / 3 / 2 0 0 7
13. Manual Focus
battery level
FULL AUTO indicator
(p. 55)
20. Volume
Warning message
Current date/time
16. HDD
Protection
14. HDD,DVD/Card type
15. Movie recording quality
The above screen is an example for explanation:
It is different from the actual display.
43
1. Recording mode (p. 40, 41, 64)
10.Recording status
: Movie (HDD/DVD)
: During recording
ꢀ
ꢁ
ꢂ
ꢃ
:
9
: Still (Card)
: During recording pause (lights in
green)
When focus locks during photo
recording (lights in purple)
: External input still (field) (Card)
: External input still (frame) (Card)
*1
2. 16:9 mode (only in movie recording mode)
No display
(p. 61)
11.Zoom (p. 50)
No display : 16:9 mode OFF
: 16:9 mode ON
)
(Digital Zoom: Off)
3. Programme AE (only in movie recording
*
mode) (p. 56)
(Digital Zoom: 120×)
+
No display : Auto
(Digital Zoom: 1500× only in movie
: Sports
5
6
7
8
9
recording mode)
: Portrait
: Spotlight
: Sand & Snow
: Low Light
12.Exposure correction (p. 54)
No display : Auto
: Manual
4. Backlight compensation (p. 54)
13.Manual focus (p. 52)
No display : Backlight compensation OFF
No display : Autofocus
: Manual focus
: Backlight compensation ON
@
5. Electronic image stabiliser (EIS) (p. 59)
No display : EIS OFF
: EIS ON
A
6. White balance (p. 57)
No display : Auto
: Set
;
<
=
: Outdoor
: Indoor
7. Microphone filter (only in movie recording
mode) (p. 59)
No display : Microphone filter OFF
: Microphone filter ON
C
8. Self-timer (only in still recording mode) (p. 64)
No display : Self-timer OFF
: Self-timer ON
D
(countdown is from 10 seconds)
9. External Input (p. 63)
No display : Camera
L IN
: AV input
44
14.HDD, DVD/Card type
16.HDD Protection (p. 65)
: HDD
No display : HDD Protection On
: HDD Protection Off
: HDD (write-protected)
: DVD-RAM
*3
: DVD-RAM (write-protected)
: DVD-RW (VR-mode/VF-mode)
: Protected DVD-RW (VR-mode)
!
ꢄ/ ꢅ
ꢆ
17.Remaining space on disc/card
REM XX
: Remaining recordable minutes
during movie recording
: Number of remaining recordable
still images during still recording
*4
MIN
: DVD-RW (VR-mode) finalised on
this DVD video camera/recorder
: DVD-RW (VR-mode) finalised on a
device other than this DVD video
camera/recorder
ꢇ
*5
REM XX
ꢈ
*3
18.Remaining number of recordable scenes
(when using HDD)
: Finalised DVD-RW (VF-mode)
ꢉ
"
ꢊ
REM XX
Scene
: Will appear when the remaining
number of recordable scenes (999
scenes max. ) is 50 or less. If the
number is down to 10 or less, the
display will be in purple.
: DVD-R
: DVD-R already finalised on this
DVD video camera/recorder
: DVD-R finalised on a device other
than this DVD video camera/
recorder (including a DVD-R
recorded on a Hitachi DVD video
camera/recorder marketed before
DZ-HS500SW, but not finalised)
: +RW
*6
%
19.Remaining battery level (p. 29)
(full charge)
J
K
L
M
(low remaining charge)
: Finalised +RW
: SD memory card
&
'
20.Volume
: Locked SD memory card
*2
:
No display
Will appear with external input.
The display position will be different
during playback (p. 68).
15. Movie recording quality (only in movie
recording mode) (p. 60)
XTRA
FINE
STD
: Best quality
: High quality
: Standard quality
Still recording quality (only in still recording
mode) (p. 63)
FINE
NORM
ECO
: High quality
: Standard quality
: Number of recordable stills is
prioritised
*1 When no disc or card is in the DVD video camera/recorder or disc has not yet been initialised, a write-protected
disc or locked card, or a disc or card with no remaining space, has been inserted. Or if the HDD is protected or
has no remaining free space.
*2 No display if no disc or card is loaded, or if a disc or card unusable on this DVD video camera/recorder is
loaded.
*3 No remaining time or number will be displayed with a protected HDD/disc or locked card, or finalised DVD-RW
(VF-mode)/DVD-R/+RW.
*4 In XTRA mode, possible recording time may be longer than the displayed time.
*5 The displayed number of recordable stills is for reference: This number may not decrease, depending on the
recording conditions.
*6 Combining scenes will not increase the remaining number of recordable scenes.
45
●Switching the information display mode
You can switch the display mode of on-screen information:
Press the DISPLAY button.
The full and minimum display modes will alternate.
• Full display mode: All types of information will
appear.
• Minimum display mode: The recording mode (see
1 on page 43) and recording status (see 10 on
page 43) will appear. If the DVD video camera/
recorder has warning information, a warning message will appear.
Note:
The DVD video camera/recorder does not record the date and time as a part of image. However, this information
during recording will be recorded with image as data which can be checked on Disc Navigation screen during
playback (see “INFORMATION DISPLAY DURING RECORDING” on page 43).
●Display when recording an image of yourself
When recording with the LCD screen facing the same direction as the
lens, the operating status will appear: The battery remaining level will
appear only when the remaining level is very low, and the display will
blink.
Operating status/warning message
Battery remaining level
No warning/message (see page 43) will appear when recording with the LCD screen facing the same
direction as the lens.
Instead, the following screen display symbols will blink to inform you of the operation status of
DVD video camera/recorder.
When the LCD monitor is turned 180º from the position with the LCD screen facing the same
direction as the lens, the warning/message can be checked.
46
●Interpreting symbols on LCD screen when recording with the screen
facing the same direction as the lens
Screen
display
symbol
Description
• Status in which recording is not possible on HDD.
• An attempt to record a photo on HDD was made.
• An attempt to record a still is being made with a DVD-RAM/DVD-RW/DVD-R/+RW
%
used.
• An unusable disc is loaded.
• An attempt to record movie on a card was made.
• An unusable card is loaded.
)
/
7
• HDD/disc is write-protected.
• A locked card is loaded.
• During recording (lights in red).
• The remaining capacity on HDD/disc is approaching the limit 0 (blinks in red).
• During recording pause (lights in green).
• During focus lock (lights in purple).
8
• The remaining capacity on HDD/disc/card is approaching the limit 0 (blinks in red).
• There is no remaining capacity on HDD/disc/card (blinks in green).
• An attempt to record a copy-guarded image is being made (blinks in green).
Note:
• If the LCD screen is set facing the same direction as the lens, the LCD screen will display a mirror image (left and
right reversed).
• If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewfinder.
• Although you can switch to the manual focus, exposure and on-screen display modes even during recording with
LCD screen facing the same direction as lens, they will not appear on the screen.
• When the LCD monitor is opened and turned 180º with the Programme AE set to Low Light, the monitor screen
will light white (see page 57).
47
Checking Flow of Menu
The following two on-screen menu modes are available with this DVD video camera/recorder:
• Full Menu: To display all menu items for experts
• Quick Menu: To display only the fundamental menu items for first timers
●Operating Menu
The Full Menu will appear if you press the MENU button.
You can use the 2/1/0// buttons on DVD video camera/recorder to select various setting
options in Full Menu and designate them.
The cursor to be
chosen will move to
Press the MENU button
the right
Press / or ꢇ
Ca
P r og r a
W
E
m
e r a Fun c t
AE
h i t e Ba l .
i
ons Se
t
up
Ca
P r og r a
W
E
m
e r a Fun c t
AE
h i t e Ba l .
i
ons Se up
t
A
A
m
Au
Au
On
t
t
o
o
m
Au
Au
On
t
t
o
o
A
A
I
S
I
S
D i g . Zoom
1 2 0 x
O f
D i g . Zoom
1 2 0 x
O f
M IC . F t e r
i
l
f
M IC . F t e r
i
l
f
ENTER
RETURN
ENTER
RETURN
Press 0 or ꢀ
Press 1
Press 2
Rec o r d F u n c t
V I DEO Mode
1 6 : 9
i
o n s Se
t
F
up
I NE
Press the ꢇ button directly to choose an option from menu.
To return to the screen one before, press the ꢀ button.
Pressing the MENU button again will cause the Menu display to
disappear.
The cursor to
be chosen will
move down
On
CAMERA
On
I n p u t Sou r c e
OSD Ou pu
HDD r o t ec
t
t
P
t
i
o n
On
ENTER
RETURN
Note:
• Pressing the QUICK MENU button will display the Quick Menu screen: The operation will be the same as when
the MENU button is pressed.
• Pressing the MENU button during recording will not display the menu.
• The menu screen will disappear when it is left for approx. one minute without any operation.
48
●Flow of Full Menu
■ The shaded menu item can also be set using the Quick Menu.
Refer to page indicated for details of each function.
Camera Functions Setup
Not displayed when external input is being
selected.
Date Setup
Da t e Se t up
Da
Da
t
t
e
e
Se t
Mod e
D /M/ Y
Ca
P r og r a
W
E
m
e r a Fun c t
AE
h i t e Ba l .
i
ons Se up
t
A
m
Au
Au
On
t
t
o
o
A
I
S
ENTER
RETURN
D i g . Zoom
1 2 0 x
O f
M IC . F t e r
i
l
f
ENTER
RETURN
Date setting (p. 32)
Display format (p. 32)
Programme AE (p. 56)
White balance (p. 57)
EIS (p. 59)
LCD/EVF Setup
Digital zoom (p. 50)
Microphone filter*1 (p. 59)
LCD/ EVF Se t up
LCD / EVF Ad
j
us
t
EVF s p a y
D
i
l
Au t
o
*1: Not displayed in “SD” status.
ENTER
RETURN
Record Functions Setup
Rec o r d F u n c t
V I DEO Mode
1 6 : 9
i
o n s Se
t
F
up
I NE
Adjust (p. 35)
EVF Display (p. 36)
On
CAMERA
On
I n p u t Sou r c e
OSD Ou pu
HDD r o t ec
t
t
P
t
i
o n
On
ENTER
RETURN
Initial Setup
Movie quality*2 (p. 60)
16:9*3 (p. 61)
Input selection (p. 63)
External still input*4 (p. 64)
Self-timer*5 (p. 64)
I
n
i
t
i
a
l
Se t up
Beep
Po er Save
On
Off
On
w
Re c o r d LED
L a ng u age
Eng
l
i
s
h
De
Reset
ENTER
m
o
Mode
RETURN
A u t o
On-screen information display output*6 (p. 65)
HDD protection*7 (p. 65)
Beep (p. 33)
Power save (p. 33)
Recording LED (p. 34)
Language selection (p. 33)
Demo mode (p. 34)
Reset (p. 34)
*2: The quality mode is not displayed in “SD” status
(p. 63).
*3: Not displayed in “SD” status, or with external input.
*4: Displayed in “SD” status, and input selection is set
to external signal.
*5: Displayed in “SD” status.
*6: Displayed only when input selection is set to
camera.
*7: Displayed only in “HDD” status.
49
HDD
ꢁꢂꢃ
ꢄꢅ
Zooming
If you continue to hold the zoom lever on the
“T” control side with Dig. Zoom specified, the
digital zoom will be activated midway (when
optical 30-power is exceeded).
1
Press the MENU button, choose “Dig. Zoom”
on the “Camera Functions Setup” menu
screen, and then press the ꢇ button.
You can zoom up to 1500-power.
2
3
Choose the desired magnification, and then
press the ꢇ button.
W: recording wide area
(wide-angle)
Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bar.
Note:
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• If you set zoom to “1500×” when recording photo, the
digital zoom will be up to 120×.
T: recording enlarged
image (telephoto)
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
MACRO RECORDING
Use the macro function when recording a small object from close-up position: You can shoot the
subject as close as approximately 2 cm from the lens surface, magnifying the image to fill the screen.
1
Aim the DVD video camera/recorder at the
subject, and press the zoom lever to “W”
control side.
Note:
• Zoom can be used, but the subject may not be
focused, depending on the distance to the subject. In
this case, move the zoom to “W” control side to focus.
• The amount of light tends to be insufficient during
macro recording: If the subject image is too dark, use
additional lighting.
50
RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO
EFFECT
Use the tele-conversion lens or wide-conversion lens with the following filter diameter and thread
pitch to record subjects for stronger telephoto or wide-angle effect:
Filter diameter: 34 mm
Thread pitch: 0.5 mm
When attaching the optional DZ-TL1 tele-conversion lens or DZ-WL1 wide-conversion lens, use the
optional step-up ring: DZ-SR3437 (see page 137).
1
2
Attach the step-up ring over the lens.
Remove the cap of conversion lens, and screw the lens into the thread of step-up ring.
Conversion lens
Step-up ring
(Attach)
• Tele-conversion lens: For stronger telephoto effect
• Wide-conversion lens: For stronger wide-angle effect
Note:
• With DZ-TL1 tele-conversion lens, the focusing range
at “T” (telephoto) control side is between approx. 5 m
and infinite.
• When a conversion lens is attached, note that the four
corners of screen will be slightly dim if you zoom in on
a subject on the W control side (wide-angle side).
• When replacing the lens, take care not to drop the
DVD video camera/recorder.
• If a generally available filter is attached, do not attach
the removed lens hood.
• Some generally available conversion lenses may not
be usable on this DVD video camera/recorder,
depending on the lens maker.
51
HDD
ꢁꢂꢃ
ꢄꢅ
Manually Focusing Subject
The DVD video camera/recorder usually focuses on a subject automatically (autofocus). You can also
manually focus a subject depending on the recording conditions.
FOCUSING DURING RECORDING
Normally, the DVD video camera/recorder automatically focuses the subject (autofocus), but you
can also manually focus a subject, depending on the recording conditions (manual focus).
Focusing range:
You can switch the display mode of on-screen information:
• On T (tele) side: approximately 1 m from lens surface to infinity
• On W (wide) side: approximately 2 cm from lens surface to infinity
1
Press the FOCUS button during recording.
Manual Focus icon will appear on the screen.
0 0 : 0 0 : 0 0
MIN
REM3
0
Manual Focus icon
8
:
0
0
0
0
7
FINE
1
/
3
/
2
Adjust with
0// buttons
2
3
Press the zoom lever to “T” control side to
zoom in on subject.
Use the 0// buttons to adjust the focus,
while viewing the image in the viewfinder or
on the LCD screen.
Note:
• Pressing FOCUS will alternate between manual focus
and auto focus. With auto focus, no indication will
appear on the screen.
• Be sure to zoom in on your subject before manually
focusing on it. If you bring the subject into focus at the
“W” control side, focus will be faulty when you turn the
zoom lever to the “T” control side to zoom in on the
subject.
• Manual focus is released when the DVD video
camera/recorder is turned off. When you turn the DVD
video camera/recorder on next time, auto focus will be
restored.
52
Manually focus the following objects, which may not be automatically focused (see page 52):
Objects not in
the centre of
screen
Objects with
little variation
in brightness,
such as white
wall
Objects that
are far and
near at the
same time
Objects
moving rapidly
Objects lit by
neon sign,
spotlight, etc.
which glares
or emits
Dark objects
strong light
Object behind
glass with
water
Night view
droplets, dirt
on it
53
HDD
ꢁꢂꢃ
ꢄꢅ
Adjusting Brightness of Image to be recorded
(Exposure)
The DVD video camera/recorder usually adjusts the exposure automatically. You can also manually
adjust the exposure depending on the recording conditions.
1
Press the EXPOSURE button during
recording.
The exposure adjustment bar will appear on
the screen.
0 0 : 0 0 : 0 0
MIN
Adjust with 0// buttons
REM3
0
Exposure adjustment bar
8
:
0
0
0
0
7
FINE
1
/
3
/
2
Note:
• Pressing EXPOSURE will alternate between manual
adjustment and auto exposure. With auto exposure,
no indication will appear on the screen.
• The exposure setting will return to Auto when the
DVD video camera/recorder is turned off.
2
Use the 0// buttons to adjust the
exposure, while viewing the image in the
viewfinder or on the LCD screen.
HDD
ꢁꢂꢃ
ꢄꢅ
Compensating for Backlight
When subject is lighted from rear, this function will compensate for lighting so that the subject is not
too dark.
1
Press the BLC button during recording.
0 0 : 0 0 : 0 0
REM3
MIN
0
Backlight correction icon
8
:
0
0
0
0
7
FINE
1
/
3
/
2
The backlight correction icon will appear.
Note:
• Pressing the BLC button will alternate between
backlight setting between on and off.
• The backlight setting will automatically return to “off”
when the DVD video camera/recorder is turned off.
54
HDD
ꢁꢂꢃ
ꢄꢅ
Using Full Auto Function
Pressing the FULL AUTO button will fully automate the camera functions.
1
Press the FULL AUTO button.
“FULL AUTO” will be displayed on the screen
of DVD video camera/recorder for several
seconds.
The following settings will reset to defaults:
When setting Reference
Function
full auto
Auto
page
52
Focus
Backlight
compensation
Off
54
Exposure
Auto
Auto
Auto
On
54
56
57
59
59
Programme AE
White balance
EIS
MIC.Filter
Off
55
HDD
ꢁꢂꢃ
ꢄꢅ
Setting Up Camera Functions
• See page 48 for how to set.
Before You Begin
• No menu screen appears with external input.
SELECTING SHOOTING MODE TO MATCH THE SUBJECT
(SWITCHING PROGRAMME AE MODE)
This DVD video camera/recorder automatically detects the status of subject and surrounding
situation and records the optimum image: If you choose the shooting mode to match the recording
conditions, clearer images will be recorded.
10// buttons to choose “Program AE” on
Press the MENU button, use the 2/1/
Auto : The camera/recorder automatically
judges the subject and surrounding environment
for optimum recording.
the “Camera Functions Setup” menu screen,
and then press the ꢇ button.
Sports : Reduces blurring when recording
rapidly moving subjects such as in golf or tennis.
Portrait : Makes a subject, such as a person
or a creature, stand out from a blurred
background.
The options will appear on the right of
“Program AE”.
2
3
Use the 2/1/0// buttons to choose
the desired option, and then press the ꢇ
button: The selected option will be set.
Spotlight : Prevents overexposure of subject
portrait face, etc. when strong light strikes the
subject, as in a wedding or on stage.
Sand & Snow : Prevents underexposure of
subject portrait face, etc. in a place where
reflection of light is intense, such as at the
seaside in midsummer or on a ski slope.
Low Light : Allows user to record in a dark
place even with decreased lighting.
Turn the LCD monitor 180º during recording:
The LCD monitor light can then be used for
recording.
Press the MENU button to end the setting.
The menu screen will disappear.
Note:
• You can check the selected AE mode by the on-
screen information display. However, nothing will
appear in the Auto mode.
• The shooting mode set as above will be stored in
memory even if the DVD video camera/recorder is
turned off.
• When recording in a dark area, an after-image will
appear when filming a moving subject or if camera
shake occurs (it is therefore recommended that you
use a tripod in such cases).
• If the Sports mode is used under a fluorescent light,
the image may flicker: In this case, use the Auto mode
for recording.
56
RECORDING DARK SUBJECTS USING LCD MONITOR LIGHT
When Programme AE is set to Low Light, you can use the light from LCD monitor to record a subject.
10// buttons to choose “Program AE” on
Press the MENU button, use the 2/1/
Note:
• Use the viewfinder to check the image to be recorded.
• The LCD monitor light allows you to record a subject
up to 1 m even in a dark place.
the “Camera Functions Setup” menu screen,
and then press the ꢇ button.
• An after-image will appear when filming a moving
subject or if camera shake occurs (it is recommended
that you use a tripod).
• If a subject cannot be focused properly, manually
adjust the focus (see page 52).
2
Use the 2/1/0// buttons to choose
“Low Light”, and then press the ꢇ button.
3
4
Press the MENU button to end the setting.
Open the LCD
monitor, turn it 180º
so that it faces the
same direction as
the lens: The LCD
monitor will light
white.
ADJUSTING COLOUR (WHITE BALANCE)
This DVD video camera/recorder automatically adjusts the colour of subject. Change the white
balance setting depending on the recording conditions.
Mode
Setting content
On-screen display
Auto
Set
White balance always automatically adjusted
None
You can manually adjust white balance to match the light
source or situation (p. 58)
;
<
Outdoor
Indoor
To record in fine weather
To record under incandescent light, halogen light or bulb-
colour type fluorescent light
=
57
10// buttons to choose “White Bal.” on the
Press the MENU button, use the 2/1/
Note:
• The white balance mode can be confirmed using the
on-screen information.
“Camera Functions Setup” menu screen, and
• The white balance setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
then press the ꢇ button.
2ꢇChoobseuttthoend. esired option, and then press the
• Do not block the infrared sensor with hand, etc.
3
Press the MENU button to end the setting.
Infrared sensor block
• If a tele or wide-conversion lens is used, the auto
white balance may not operate depending on the
recording conditions. If this happens, set to the mode
to match the recording conditions, or manually set the
white balance.
• Be sure to remove the lens cap before turning the
DVD video camera/recorder on: If the DVD video
camera/recorder is turned on with the lens capped,
the white balance will not work normally.
●Setting white balance manually
1
Point the DVD
video camera/
recorder at a white
object so that it fills
the screen. Use an
object that is not
transparent.
If focus is not
correct when the
white object fills the screen, manually focus
the object, referring to “Manually Focusing
Subject” (see page 52).
4
Press the ꢀ button to end the setting.
Thick paper
Note:
• The white balance set using the “Set” option will be
stored in memory until it is re-set.
• Do not use a coloured object when setting the white
balance: The appropriate tint cannot be set.
• If “Input Source: LINE” has been specified, you
cannot use the “Set” mode of white balance (p. 63) .
• The setting on white balance “Set” may not be
possible in a dark place. Also, the white balance
cannot be set when the zoom bar is in the digital
zoom range (p. 50). In such status, the “;” indicator
will remain blinking. Set the white balance in a bright
place with “Dig. Zoom: Off” specified.
20// buttons to choose “White Bal.”, “Set”
Press the MENU button, use the 2/1/
• If the recording conditions have changed, re-set the
white balance for appropriate colours.
on the “Camera Functions Setup” menu
screen, and then press the ꢇ button.
• The setting will be stored in memory even when the
DVD video camera/recorder is turned off: The “;”
indicator will blink when the DVD video camera/
recorder is turned on next time. Re-set the white
balance as needed.
3
Hold ꢇ button pressed until the “;”
indicator changes from blinking to a steady
light. When the “;” indicator lights, the
white balance setting will be complete.
58
USING THE ELECTRONIC IMAGE STABILISER (EIS)
When you use zoom (see page 50) to record a magnified subject image, it will correct fuzziness in the
recorded image.
• After recording with EIS set to “Off”, it is
10// buttons to choose “EIS” on the
Press the MENU button, use the 2/1/
recommended that you return the setting to “On” and
then turn the DVD video camera/recorder off, unless
you normally record with “Off” setting.
• It is recommended that you specify “EIS: Off” when
using the DVD video camera/recorder on a desk or
tripod.
• When “EIS: On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
• Gross camera shake may not be entirely corrected
even if “EIS: On” is specified: Firmly hold the DVD
video camera/recorder with both hands.
• EIS may not operate correctly when the tele or wide-
conversion lens is used.
“Camera Functions Setup” menu screen, and
then press the ꢇ button.
2Cꢇhoobseuttthoen“. On” or “Off”, and then press the
3
Press the MENU button to end the setting.
Note:
• You can check EIS On or Off by the on-screen
information display.
• The EIS setting will be stored in memory even when
the DVD video camera/recorder is turned off.
RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)
See page 50 for setting on digital zoom.
REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)
When recording sound from the microphone built into this DVD video camera/recorder, you can
reduce wind noise in recording.
If “MIC.Filter: On” is specified, the low-frequency components in the sound picked up by
microphone will be cut off during recording: This makes it easier to hear the target voice or sound
during playback.
10// buttons to choose “MIC.Filter” on the
Press the MENU button, use the 2/1/
Note:
• You can also use the on-screen display to confirm that
the MIC.Filter has been set.
“Camera Functions Setup” menu screen, and
• The MIC.Filter setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The MIC.Filter function will work only during movie
recording.
then press the ꢇ button.
2ꢇChoobseuttthoend. esired option, and then press the
3
Press the MENU button to end the setting.
59
Setting Up Record Functions
HDD
ꢁꢂꢃ
ꢄ
SWITCHING MOVIE QUALITY (VIDEO MODE)
Choose the movie quality from “XTRA”, “FINE”, “STD”.
It is recommended that you record critical subjects in the “XTRA” or “FINE” mode.
10///ꢇ buttons to choose “VIDEO
Press the MENU button, use the 2/1/
Note:
• The movie quality setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Mode” on the “Record Functions Setup”
menu screen, and then press the ꢇ button.
• The “VIDEO Mode” setting will not change even if the
DVD is replaced.
2
3
Choose the desired quality mode, and then
press the ꢇ button.
• When using DVD-RW (VF-mode)/DVD-R, you cannot
switch the setting on movie quality or wide-screen
mode while recording on the disc: The DVD video
camera/recorder will be automatically set to the movie
quality or wide-screen mode first used with the disc
for recording.
Press the MENU button to end the setting.
• When using a DVD-RW (VF-mode)/DVD-R/+RW:
You cannot specify the combination of “VIDEO Mode:
STD” and “16:9 On”(p. 79). If you specify “16:9 On”
and try to switch the VIDEO Mode to STD from XTRA
or FINE, the screen will automatically switch to the
4:3-aspect ratio display.
• The movie quality setting is effective only during
movie recording: The setting will not be displayed
during recording of stills.
Block-like noise may appear in recorded image, or the outline of subject image is distorted under the
recording conditions listed below. Pan the DVD video camera/recorder as slowly as possible (Block
noise is likely to appear in the “STD” mode):
• If there is a complicated pattern in background (as in following figure on left);
• If the DVD video camera/recorder is moved excessively or quickly;
• If subject is moving rapidly even when the DVD video camera/recorder is not moving.
(Image when block-like noise occurs)
(Image without block-like noise)
60
HDD
ꢁꢂꢃ
ꢄ
SETTING TO WIDE TV SCREEN MODE (16:9 MODE)
When viewing recorded images later on a wide-screen TV (aspect ratio 16:9), specify wide-screen
(16:9) mode “On”: You can also record images with the aspect ratio changed (the aspect ratio with
“Off” is 4:3).
The following figures compare the images displayed on LCD monitor and in viewfinder when the
wide-screen mode is “on” and “off”.
“16:9 On” specified
(aspect ratio 16:9)
“16:9 Off” specified
(aspect ratio 4:3)
10// buttons to choose “16:9” on the
Press the MENU button, use the 2/1/
2
3
Choose “On”, and then press the ꢇ button.
Press the MENU button to end the setting.
“Record Functions Setup” menu screen, and
then press the ꢇ button.
When viewing playback on an ordinary TV screen later, specify “16:9 Off”: Recording with “16:9 On”
specified will be played back on an ordinary TV with longer vertical direction of image.
61
An image recorded with “16:9 On” specified will appear as follows:
Display on LCD monitor screen
Display in viewfinder
Images recorded with “16:9 Off” specified will appear as follows:
Display on LCD monitor screen
Display in viewfinder
Note:
• The 16:9 setting will be kept even after the DVD video camera/recorder is turned off.
• The 16:9 mode cannot be used with photo recording, external input.
• When using a DVD-RW (VF-mode)/DVD-R/+RW:
You cannot specify the combination of “VIDEO Mode: STD” and “16:9 On”(p. 79). If you specify “16:9 On” and try
to switch the VIDEO Mode to “STD” from “XTRA” or “FINE”, the screen will automatically switch to the 4:3-aspect
ratio display.
• Once the DVD-RW (VF-mode)/DVD-R disc has been recorded in the wide-screen mode, you will not be able to
switch to recording of external input using the same disc.
• When using DVD-RW (VF-mode)/DVD-R, switching between wide mode (16:9) and normal mode (4:3) will not be
possible while using the same disc.
• Images recorded with “16:9 On” (aspect ratio 16:9) specified will be played back with the setting used during
recording regardless of the 16:9 setting then being used.
• The 16:9 setting is not compatible with ID-1/ID-2*.
• If you connect this DVD vide camera/recorder to the S1 or S2 terminal of TV, the TV will automatically switch to
the wide-screen mode: See TV instruction manual for details.
• When using a video selector, the TV may not automatically be switched to 16:9 mode.
• If you connect the DVD video camera/recorder with a disc recorded in wide mode to a TV with 4:3 display only
and play it back, vertically long images will appear. To display 4:3 images, set “TV type” (p. 110) to 4:3 and view
the images.
• If you play back a +RW recorded in wide mode on a DVD recorder/player, etc., vertically long images will appear
even on a wide-screen TV. In this case, change the setting on the DVD recorder/player, or set “TV type” (p. 110) to
4:3 and view the images.
* This system records the aspect ratio (16:9, 4:3) information in void space between video signals.
62
ꢅ
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality.
It is recommended that you use “FINE” when recording vital images (p. 156 “Size And Quality
Of Photos”).
10///ꢇ buttons to choose “Quality” on
Press the MENU button, use the 2/1/
3
Press the MENU button to end the setting.
the “Record Functions Setup” menu screen,
Note:
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
and then press the ꢇ button.
2
Choose the option you want, and then press
the ꢇ button.
HDD
ꢁꢂꢃ
ꢄꢅ
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 115 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
Setting
CAMERA
LINE
Content
Usually select this option
To input image from another device
On-screen display
No display
L IN
10///ꢇ buttons to choose “Input
Press the MENU button, use the 2/1/
3
Press the MENU button to end the setting.
Source” on the “Record Functions Setup”
Note:
The “Input Source” setting will return to “CAMERA”
whenever the DVD video camera/recorder is turned off.
menu screen, and then press the ꢇ button.
2
Choose “LINE”, and then press the ꢇ
button.
63
ꢅ
SWITCHING EXTERNAL INPUT RECORDING METHOD (PHOTO INPUT)
When “Input Source: LINE” is specified, you can record stills of externally input images on a card.
The DVD video camera/recorder can record an external image with little movement by specifying
“Frame”, but “Field” is recommended for recording image with movement.
Recording
format
Details of setting
On-screen display
Does not suit recording of frequently moving video
subjects, despite high image quality. Frame suits recording
of less moving video.
Frame
ꢃ
ꢂ
Field
Suitable for recording of frequently moving video subjects.
10///ꢇ buttons to choose “PHOTO
Press the MENU button, use the 2/1/
Note:
• The PHOTO Input setting can be confirmed using the
on-screen information.
Input” on the “Record Functions Setup”
• The PHOTO Input setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Refer to “Recording (Dubbing) Images”, page 115 to
see how to connect the DVD video camera/recorder
to another device.
menu screen, and then press the ꢇ button.
2Sꢇelectbtuhtetodne.sired option and then press the
3
Press the MENU button to end the setting.
ꢅ
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
The self-timer function is valid only when recording photos (stills).
10///ꢇ buttons to choose “Self Timer”
Press the MENU button, use the 2/1/
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO/SELECT
button again before recording starts, or press the ꢀ
button.
on the “Record Functions Setup” menu
screen, and then press the ꢇ button.
2
Select “On”, and then press the ꢇ button.
The self-timer will be set.
3
4
Press the MENU button to end the setting.
Press the PHOTO/SELECT button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
64
HDD
ꢁꢂꢃ
ꢄꢅ
SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)
If you connect this DVD video camera/recorder to a TV to view images on TV screen, you can
switch off the on-screen information (displayed in the viewfinder or on the LCD screen) from the TV
screen.
10///ꢇ buttons to choose “OSD
Press the MENU button, use the 2/1/
Note:
• The “OSD Output” setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Output” on the “Record Functions Setup”
menu screen, and then press the ꢇ button.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 73 for playback on-
screen information display.
• Even after the on-screen information is removed from
the TV screen, it will still appear in the viewfinder or
on the LCD screen.
• The on-screen display output functions only when the
input selection is set to camera: It cannot be set
during external input.
2
3
Choose “On” or “Off”, and press the ꢇ
button.
Press the MENU button to end the setting.
“On” setting
“Off” setting
0 0 : 0 0 : 0 0
MIN
REM3
0
8
:
0
0
0
0
7
1
/
3
/
2
FINE
TV screen
TV screen
HDD
DROP DETECTION (HDD PROTECTION)
The default setting is “On”. Specify “HDD Protection: Off” if you plan to use the HDD built in this
DVD video camera/recorder in a weightless condition, such as skydiving, to prevent stop in
recording or playback: Specifying “On” in such status will activate the drop detection function and
stop recording or playback to protect the HDD built in this DVD video camera/recorder.
10///ꢇ buttons to choose ”HDD
Press the MENU button, use the 2/1/
Protection” on the ”Record Functions Setup”
menu screen, and then press the ꢇ button.
0 0 : 0 0 : 0 0
REM3 0 MIN
2
Choose ”On” or ”Off”, and then press the ꢇ
button.
An icon will
appear.
When “Off” is specified, the icon will appear.
8 : 0 0
Note:
F I N E
1 / 3 / 2 0 0 7
• The “HDD Protection” setting will return to “On” when
the DVD video camera/recorder is turned off.
(When “HDD Protection: Off” is specified)
65
Disc Navigation
HDD
ꢁꢂꢃ
ꢄꢅ
Using Disc Navigation
STARTING OR TERMINATING DISC NAVIGATION
Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder.
Here is an explanation on “scene” and “programme”, so that you will be able to make most use of
Disc Navigation function.
The screens in this instruction manual are basically those that will appear when the HDD is used:
Some items will not appear when a DVD-RAM/DVD-RW/DVD-R/+RW or card is used, but the
operation is the same.
• Turn the DVD video camera/recorder on (p. 30).
• When using HDD: Set the power switch to “HDD”.
• When using DVD: Set the power switch to “DVD”.
Before You Begin
• When using card: Set the power switch to “SD”.
1
2
Set the power switch properly.
Press the DISC NAVIGATION button.
The Disc Navigation screen (shown on
page 67) will appear.
3
Press the DISC NAVIGATION button again.
Disc Navigation will be terminated and the
DVD video camera/recorder will enter the
recording pause status.
You can also press the ꢀ button to end Disc
Navigation.
66
Disc Navigation screen
Thumbnail
*1
Selected scene number/
Number of all scenes
Al l Pr og r a
m
s
001 / 014
Cursor
*4
Current page position
Dubbed mark
*2
Still image icon
Bar graph
*3
*5
Operation guide
PLAY
PHOTO
SELECT
Icon of HDD, DVD/card type
*1 Scene:
Video (movie).......... “One scene” refers to images recorded from one press of REC button until recording is
stopped by pressing the REC button again.
Photo (still) .............. “One scene” refers to a single photo recording by pressing the PHOTO/SELECT button.
*2 Icon displayed on a photo recorded on a DVD-RAM using a Hitachi DVD video camera/recorder that can record
photos on a DVD-RAM.
This DVD video camera/recorder cannot record any photos on a DVD-RAM.
*3 The operation guide will vary depending on the operation status of DVD video camera/recorder.
*4 Appears when 13 scenes or more have been recorded.
*5 When using a disc, the icon that corresponds to the type of disc being used will appear. “ ” will appear for
card.
Icons to be displayed on thumbnail:
......................Dubbed mark (p. 80)
2.......................Fade-in (p. 87)
3.......................Fade-out (p. 87)
( ...................... Photo (p. 41)
................. Skip (p. 88)
& ...................... Lock (p. 91)
Note:
• Each time the DISPLAY button is pressed, the recording date/time of the scene on which the cursor is placed,
recording data of scene (VIDEO Mode, 16:9, recording length), and operation guide will appear in sequence
(when HDD is used).
Al
l
Pr og r a
ms
002 / 014
Al
l
Pr og r a
m
s
002 / 014
Al
l
Pr og r a
ms
002 / 014
PLAY
PHOTO
SELECT
1/ 3/2007 10:00:00
FINE 16:9
0min 39sec
Displayed only when HDD
is used
• Each time Disc Navigation is started with a DVD-RW (VF-mode)/DVD-R inserted, message “Creating Thumbnail
...” will appear. After the message appears, the Disc Navigation screen will appear.
• In the following cases, the Disc Navigation screen will appear or a message will be displayed:
- HDD or disc is write-protected
- Finalised DVD-RW (VF-mode)/DVD-R/+RW
- DVD-RW (VF-mode)/DVD-R recorded on a Hitachi DVD video camera/recorder model marketed before this
DVD video camera/recorder, and not finalised
- Locked card
• Do not leave the Disc Navigation screen displayed on TV to which the DVD video camera/recorder is connected:
Doing so could damage the TV screen, possibly by burning.
67
PLAYING BACK FROM DISC NAVIGATION SCREEN
1
2
Press the DISC NAVIGATION button.
Note:
• Pressing the 0 or / button will move the cursor
to the preceding or following scene.
Pressing the 2 or 1 button will move the
cursor up or down, or move to the preceding or
following page.
Use the 2/1/0// buttons to select
the desired scene.
The selected scene will be framed: This is
called a “cursor”.
• If there is a large number of recorded scenes, it
may take time more than usual until playback of
scenes starts.
3
Press the ꢇ button.
Playback will start from the selected scene.
ADJUSTING VOLUME DURING PLAYBACK
If the LCD monitor is open during playback of movie, playback sound will be heard from the
speaker. Adjust the sound volume using the zoom lever. Tilt it to the “T” side to increase the volume,
“W” side to reduce the volume.
VOLUME
Volume
●When playback ends
●Playing back photos
The DVD video camera/
recorder will enter the
playback pause status at
the last image of last scene.
Pressing the ꢀ or DISC
NAVIGATION button will
restore the Disc
A photo on DVD-RAM will be displayed for
approx. 3 seconds. When playing back photos
on card, playback will stop after each photo
playback.
Playback pause
Note:
• Press the ꢇ button to temporarily stop playback.
Pressing the ꢇ button again will start from that
point.
Navigation screen.
When the playback pause status continues for as
long as 5 minutes, the Disc Navigation screen
will automatically be restored.
• If you press the ꢇ button after playback of the last
scene on disc finishes, playback will start again from
the beginning.
• Pressing the ꢀ button will always restore the Disc
Navigation screen.
• When playing back photos on card, “Playback” will
appear. In the case of a photo with a large number of
pixels, it will take some time for the photo to appear.
68
• Insert a disc or card recorded on this DVD video camera/recorder to play
back scenes on it. (p. 40, 41).
• Turn the DVD video camera/recorder on (p. 30).
Before You Begin
HDD
ꢁꢂꢃ
ꢄꢅ
PLAYING BACK LATEST RECORDED SCENE
Playing Back
Note:
• To temporarily stop playback, press the ꢇ button.
Press the ꢇ button again to restart playback.
• Even if you stop playback midway and immediately
start recording again, the new image will be recorded
after the last scene on HDD, disc or card (the
previous images will not be overwritten).
• Image data edited on PC, etc., or the recorded image
may not appear on this DVD video camera/recorder;
also, the recorded sound may not play back,
depending on the type of image data.
• Image data recorded on another DVD video camera/
recorder or DVD recorder may not be played on this
DVD video camera/recorder.
• Depending on the amount of data to be played back,
it may take some time for the playback image to
appear.
• Do not operate the power switch or remove the card
while the ACCESS/PC or CARD ACCESS indicator is
lit or blinking: Doing so may damage the card or the
data on card.
• If the temperature of this DVD video camera/recorder
is too high, normal playback may not be possible:
Turn the DVD video camera/recorder off once, wait
until the ambient temperature becomes lower, and
then operate it again.
1
2
Press the ꢇ button in the recording pause
status.
The DVD video camera/recorder will enter
the playback mode, and the scene you have
recorded last will be played back.
When playback is finished, the DVD video
camera/recorder will enter the pause status
at the last image on disc.
If the playback pause status continues for as
long as 5 minutes, the DVD video camera/
recorder will automatically return to the
recording pause status.
Press the ꢀ button.
Playback will stop, and recording pause
status will be restored.
HDD
ꢁꢂꢄꢅ
DELETING LAST RECORDED SCENE
1
2
Press the MENU button during playback.
3
Choose “YES”, and then press the ꢇ
button.
The last recorded scene will be deleted, and
the recording pause status will be restored.
Choose “Edit”, “Delete Scene”, and then
press the ꢇ button.
The screen for verifying deletion will appear.
Note:
If you press the MENU button during playback using the
Disc Navigation menu, “Delete Scene” will not appear.
•
69
HDD
ꢁꢂꢃ
ꢄ
CAPTURING PHOTO
You can record an image displayed during playback of video as a photo on a card.
1
2
Press the MENU button at a scene you wish
to capture during playback.
Note:
• You can also press PHOTO/SELECT button for the
scene you wish to capture in step 1: The screen for
verifying capture will appear. Choose “YES”, and then
press the ꢇ button. The scene will be recorded on
a card.
Choose “Edit”, “PHOTO Capture”, and then
press the ꢇ button.
The screen for verifying capture will appear.
• A captured photo is played back on the DVD video
camera/recorder as follows:
When captured from a
video recorded with 16:9
(wide mode) On specified:
3
Choose “YES”, and then press the ꢇ
button.
The captured scene will be recorded on a
card.
Number of pixels (JPEG
standard): 640 x 360
When captured from a
video recorded with 16:9
(wide mode) Off specified:
Number of pixels (JPEG
standard): 640 x 480
HDD
ꢁꢂꢃ
ꢄ
SEARCH PLAYBACK OF MOVIE
During playback, press the 0 or / button and
Note:
• If the temperature inside the DVD video camera/
recorder rises, normal skip or search playback may
not be possible: Turn the DVD video camera/recorder
off, wait for a few moments, and then turn it on again.
hold it: Search playback will start.
Hold down / :
Scenes will be visually scanned forward.
Hold down 0 :
Scenes will be visually scanned backward.
Release the 0 or / button when you find the
desired image:
Normal playback will start from that point.
HDD
ꢁꢂꢃ
ꢄ
FRAME ADVANCE/FRAME BACK/SLOW PLAYBACK OF MOVIE
During playback pause, press the 0 or /
button: Frame advance, frame back or slow
playback will start.
After frame advance, frame back or slow
playback, the DVD video camera/recorder will
enter the playback pause status.
Note:
Press / once:
• In slow playback, a rapidly moving subject image may
be distorted.
Picture will advance one frame.
Press 0 once:
• The intervals for playing back frames in frame
advance/frame back/slow playback are as follows:
Frame advance and forward slow: Approx. 0.03
seconds
Frame back and reverse slow: Approx. 0.5 seconds
• No sound will be heard during search playback or
slow playback.
Picture will go back one frame.
Hold down / :
Forward slow playback.
Hold down 0 :
Reverse slow playback.
70
HDD
ꢁꢂꢃ
ꢄ
SKIP PLAYBACK OF MOVIE
During playback, press the 2 or 1 button to
Portion being played back
locate the start of desired scene.
Press 1 once:
Press 2
twice
Press 2 Press 1 Press 1
To skip to the first image of the scene
following the one being played back, and start
playback.
once once
twice
Scene 1
Scene 2
Scene 3
Press 2 once:
To return to the first image of the scene being
played back, and start playback.
Hold down 1 :
Portion being played back
Press 2
Press 1
Press 1
To continuously locate the beginnings of
scenes, starting from the scene following the
scene being played back. When the desired
image appears, release the button: Playback
will start from that point.
once
once
twice
Scene 1
Scene 2
Scene 3
Pressing the 2 button at a portion several seconds
from the start of scene being played back will return
to the start of the scene preceding that being played
back.
Hold down 2 :
To continuously locate the beginnings of
scenes backward, starting from the scene
preceding the scene currently being played
back. When the desired image appears, release
the button: Playback will start from that point.
Note:
• If you perform skip playback during playback pause,
the DVD video camera/recorder will enter the
playback pause status at the beginning of the located
scene.
• Pressing the 1 button in the last scene on HDD or
disc will set the DVD video camera/recorder to the
playback pause status at the last image.
• If the temperature inside the DVD video camera/
recorder rises, normal skip or search playback may
not be possible: Turn the DVD video camera/recorder
off, wait for a few moments, and then turn it on again.
ꢁꢅ
PLAYING BACK STILLS
Press the 2 or 1 button during playback to
[When using DVD-RAM]
(This DVD video camera/recorder cannot record
any photo on a DVD-RAM.)
quickly play back stills in sequence.
Press 1 once:
Releasing the 2 or 1 button will start
To display stills one by one forward.
Press 2 once:
continuous playback.
To display stills one by one backward.
[When using card]
When the 2 or 1 button is released, the
photo at that point will be displayed, and then
the DVD video camera/recorder will enter the
playback pause status.
Use the slide show function for continuous
display (p. 111).
71
HDD
ꢁꢂꢃ
ꢄꢅ
JUMPING TO SPECIFIED POINT (GO TO)
1
2
Press the MENU button
during playback.
Top:
To go to the start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
Go To
To p
En d
Spec
i
f
y
Choose the option
(point you want to go
ENTER
RETURN
to), and then press the ꢇ button.
Specify:
To go to a specified point and enter playback
pause. See the following for details.
●Specifying the point to view
1
Choose “Specify” in step 2 above, and then
press the ꢇ button.
3
Press the ꢇ button to enter the selection.
The DVD video camera/recorder will go to
the specified point and enter the playback
pause status.
The screen for specifying the point to go to
will appear.
Pressing the ꢇ button again will start
Position of currently
played back image
Total recording time of
all selected scenes
playback.
Go
t
o
Note:
TOP
0: 00: 00
CURRENT
00: 03 : 26
END
00: 24 : 24
• To cancel the “Go To” procedure midway, press the ꢀ
button before going to the specified point.
• If multiple scenes are selected using the Disc
Navigation function or PHOTO/SELECT button,
choosing “Top” will jump to the beginning of selected
scenes (p. 104).
Cursor
GO T00: 03 : 26
TOP END ENTER
CANCEL
Cursor position
• When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording
time” display.
2
Use the 2/1/0// buttons to select
the desired time of chosen point.
• With card, the number of stills will appear at the
“TOP”, “CURRENT”, “END” and “GO TO” indicators.
• The cursor may not move at same-pitch intervals.
Press 2
:
:
:
To select the start.
To select the end.
Press 1
Press 0 or /
• Press once:
To move the cursor in 1-minute units for
HDD
(10-second units for DVD, 1-still units for
card)
• Hold down:
To move the cursor in 10-minute units for
HDD
(1-minute units for DVD, 10-still units for
card)
Go
t
o
TOP
CURRENT
END
0: 00: 00
00: 03 : 26
00: 24 : 24
GO TO 00: 00 : 00
TOP END ENTER
CANCEL
(When the start of scene is selected)
72
HDD
ꢁꢂꢃ
ꢄꢅ
INFORMATION DISPLAY DURING PLAYBACK
Various types of information on recording will be superimposed on playback image you are viewing.
9:30
1/ 3 / 2007
No display
Playback information
display
Recording date/time
*1
Programme or
Play List.
●Switching the information display
mode
Press the DISPLAY button: You can switch the
display mode of on-screen information.
*2
Number of programme or play list being
played back (not displayed when all
programmes are being played back).
Refer to “HDD, DVD/Card type” on page 45.
Will appear when each function is specified
“On”.
*3
*4
When using HDD/DVD:
*5
Recording mode
ꢈ
: Standard playback
: Playback pause
: Forward search playback
: Reverse search playback
*4
.
Scene No.
Repeat play
/
0
1 : Forward skip playback
06
006
00:00:16
2 : Reverse skip playback
Playback
operation
3
4
: Forward frame advance
: Reverse frame back
*5
: Forward slow playback
: Reverse slow playback
Counter
*3
See pages 69-71 for how to operate.
The “6” mark will appear on the first image
on disc.
HDD, Disc type
*2
Programme No. or Play List No.
*1
Programme or Play List
The “5” mark will appear on the last image
on disc.
When using card:
• Recording date/time display: Shows the date/
time when recording was started. Even when
playback starts, the date/time display will not
advance.
Scene No.
File name
*4
Slide Show
• No display: No information will appear.
However, when the mode of playback
operation is switched, the symbol will appear
for approx. 3 seconds.
100—0003
003
*5
Recording mode
Playback operation
*4
Lock
Note:
See page 94 and after for “Programme”, page 97 and
after for “Play List”.
73
SELECTING MULTIPLE SCENES
1
2
Press the DISC NAVIGATION button.
Repeat steps 2 and 3 to randomly select
multiple scenes.
Use the 2/1/0// buttons to select
the desired scene.
3
Press the PHOTO/SELECT button once:
The selected scene will be framed in red and
yellow.
SELECTING CONSECUTIVE SCENES TOGETHER
1
Press the DISC NAVIGATION button.
Use the 2/1/0/
Note:
• You can know the status of scenes from the colours of
cursor and bargraph:
2/ buttons to point the
Al
l
Pr ogr a
ms
005 / 014
Cursor Bar graph
Status of scenes
cursor at the first scene
in the range of scenes
you want to select.
Yellow Light blue Current cursor position
PLAY PHOTO SELECT
Range of scenes being
Blue
Red
Light blue
selected
Yellow Scenes already selected
Yellow frame
3
Hold down the
PHOTO/SELECT
button for at least one
second:
Al
l
Pr ogr a
m
s
005 / 014
• Pressing the ꢇ button after selecting scenes will
play back only the selected scenes from the
beginning of each.
• To cancel a selected scene, select the scene to be
cancelled, and then press the PHOTO/SELECT
button.
To cancel all selected scenes, press the ꢀ button.
• You can also select scenes in reverse from the last
scene in the range.
ENTER
CANCEL
The selected scene will
be doubly framed in
yellow and blue.
Double frames in
yellow and blue
• To release multiple selection, press the ꢀ or PHOTO/
SELECT button before pressing the ꢇ button in
step 4.
4/ buttons to select the
Use the 2/1/0/
Al
l
Pr ogr a
m
s
010/ 014
last scene in the range
you want, and then
press the ꢇ button:
• Up to 999 scenes can be selected.
PLAY
DESELECT ALL
Red frame
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
When scenes up to
this point are selected
74
FUNCTIONS AVAILABLE WITH DISC NAVIGATION
The Disc Navigation mode will allow a variety of further operations.
Functions Available with Disc Navigation
Available
function
Reference
page
Contents
Editing of scenes
You can delete unnecessary scenes,
combine scenes, or divide one scene.
84 – 86
87 – 89
90
1
*
ꢉ
●
●
●
●
●
●
●
Setting special
effects to scenes
You can attach fade and skip to a
scene, and change existing thumbnails.
Copy from disc to
card
You can copy photos recorded on DVD-
RAM disc to card.
Scene lock
You can lock any scene so that it will not
be deleted by mistake: Essential scenes
are thereby protected, and recording
another still is possible.
91
●
●
Scene
information
display
You can display information on one
scene or multiple scenes, such as
image quality, recording time, etc.
93
●
●
●
●
●
●
●
●
Changing title
You can change the title of play list or
programme.
95, 103
97
●
●
●
●
●
●
●
●
●
Creation of play
list
You can create an original movie by
changing the combination of scenes.
Initialisation
You can delete all data recorded on
HDD/DVD/Card.
104
●
●
Protection
You can protect the HDD/DVD-RAM/
DVD-RW (VR-mode) to prevent deletion
or editing by mistake.
105
●
●
●
●
●
●
Remaining
display
(Capacity)
The remaining recordable movie time or
number of recordable stills is displayed.
105
107
●
●
●
●
●
●
Disc finalisation
Unfinalising disc
Repeat play
You can use this DVD video camera/
recorder to finalise any DVD-RW/DVD-
R/+RW recorded on it so that the disc
can be viewed on DVD recorder/player,
etc.
2
*
●
You can unfinalise a DVD-RW (VF-
mode)/+RW that was finalised on this
DVD video camera/recorder so that
additional videos can be recorded on
the disc.
108
●
●
●
●
You can repeatedly play back
programmes and scenes.
110
111
●
●
●
●
Slide show
You can play back stills continuously.
●
1
*
*
Only deletion is possible.
Additional recording can be made on a finalised DVD-RW (VR-mode).
2
Note:
Note
Setting special effects to scenes (fade, skip, thumbnail) are unique to this DVD video camera/recorder. When a disc
with any effects set on this DVD video camera/recorder is directly played back on a DVD recorder/player or read into
PC, the set effect results will not be reflected in the playback or reading. To reflect the set effect results, connect
both devices using the AV/S input/output cable and then perform recording (Dubbing, p. 115).
75
UNDERSTANDING FLOW OF DISC NAVIGATION MENU
Press the MENU button on the Disc Navigation screen: The menu screens for Disc Navigation and
menu screens for HDD/DVD/Card will appear.
Shaded items will also appear in Quick Menu display mode (see page 48).
Refer to pages indicated for details of settings.
●When using HDD
Scene
Edit
Effect
(p. 84)
(p. 87)
Divide
Delete
(p. 85)
(p. 84)
Dubbing (p. 79)
Select (p. 92)
Combine
Move*
(p. 86)
(p. 86, 102)
1
1
* Will appear when a
play list is displayed.
Detail
(p. 93)
Fade
Skip
Thumbnail
(p. 87)
(p. 88)
(p. 89)
Execute
Mark Off
(p. 80)
(p. 83)
Start → Current
Current → End
All
(p. 92)
(p. 92)
(p. 92)
Play list
Select (p. 98)
Play (p. 98)
Create (p. 97)
Go To
Top
End
(p. 104)
(p. 104)
Edit
Title
Delete (p. 103)
(p. 99 – 102)
(p. 103)
HDD Setting
Format HDD
Protect HDD
Capacity
Update Control Info.
Full Format
(p. 104)
(p. 105)
(p. 105)
(p. 106)
(p. 106)
Program
Others
Select (p. 94)
Play
Title
(p. 95)
(p. 95)
Category
Repeat Play
TV type
(p. 109)
(p. 110)
(p. 110)
All
Dubbed
Un Dubbed
(p. 109)
(p. 109)
(p. 109)
On
Off
(p. 110)
(p. 110)
16:9
4:3
(p. 110)
(p. 110)
76
●When using DVD-RAM/DVD-RW (VR-mode)
Scene
Edit
Effect
Copy* (p. 90)
Select (p. 92)
(p. 84)
(p. 87)
Divide
Delete
Combine
Move*
(p. 85)
(p. 84)
(p. 86)
(p. 86, 102)
2
3
3
* Will appear when a
play list is displayed.
Detail
DVD-RAM only
(p. 93)
2
*
Fade
Skip
Thumbnail
(p. 87)
(p. 88)
(p. 89)
Start → Current
Current → End
All
(p. 92)
(p. 92)
(p. 92)
Play list
Select (p. 98)
Play (p. 98)
Create (p. 97)
Go To
Top
End
(p. 104)
(p. 104)
4
Edit
Title
(p. 99 – 102)
(p. 103)
DVD Setting
Finalize DVD*
Format DVD
(p. 107)
(p. 104)
(p. 105)
(p. 105)
(p. 106)
Delete (p. 103)
Protect DVD
Capacity
Update Control Info.
DVD-RW (VR-mode) only
Program
Others
Select (p. 94)
4
Play
Title
(p. 95)
(p. 95)
*
*5
Category
(p. 109)
(p. 110)
(p. 110)
All
VIDEO
PHOTO
(p. 109)
(p. 109)
(p. 109)
Repeat Play
TV type
5
*
DVD-RAM only
On
Off
(p. 110)
(p. 110)
16:9
4:3
(p. 110)
(p. 110)
77
●When using DVD-RW (VF-mode)/DVD-R/+RW
Scene
Select (p. 92)
Detail (p. 93)
Start → Current (p. 92)
Current → End
(p. 92)
(p. 92)
All
Program
Select (p. 94)
DVD Setting
Finalize DVD
Unfinalize DVD* (p. 108)
Format DVD*
Capacity
(p. 107)
6
Play
(p. 95)
6
(p. 104)
(p. 105)
6
Go To
Top
End
(p. 104)
(p. 104)
*
DVD-RW (VF-mode)/+RW only
Others
Repeat Play
TV type
(p. 110)
(p. 110)
On
Off
(p. 110)
(p. 110)
16:9 (p. 110)
4:3 (p. 110)
●When using card
Scene
Delete (p. 84)
Lock (p. 91)
Select (p. 92)
Start → Current (p. 92)
Detail
(p. 93)
Current → End
(p. 92)
(p. 92)
All
Go To
Card
Top
End
(p. 104)
(p. 104)
Slide Show
Start
(p. 111)
Format Card
Capacity
(p. 104)
(p. 105)
78
Dubbing on DVD
This DVD video camera/recorder allows you to choose the desired method when dubbing images
recorded on HDD to a DVD:
“New”: To dub scenes recorded on HDD to a DVD, without dubbed marks appearing, beginning with
the first scene without dubbed mark.
“Date”: To dub scenes recorded on HDD on the same date to a DVD, beginning with the first scene.
“All”: To dub all scenes recorded on HDD to a DVD, beginning with the first scene.
“Select”: To select your favourite scenes from all those recorded on HDD, for dubbing.
• Set the power switch to “HDD”.
• Prepare a recordable disc.
• The recording time for a scene that can be dubbed on one disc is
approx. 30 minutes ( in FINE mode). If the HDD contains a scene
exceeding the length that is recordable on one disc, it cannot be
dubbed: Divide the scene (see p. 85), and then perform dubbing.
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder during dubbing: Dubbing is not possible with a battery
connected.
Before You Begin
• If power is turned off and dubbing is interrupted midway, proper dubbing
will not be possible.
• The time shown on dubbing is for reference: Dubbing will be performed
at normal speed in XTRA mode; approx. 2 times the normal in FINE
mode; approx. 4 times the normal in STD mode.
If the number of scenes on HDD is too large, or the temperature of this
DVD video camera/recorder is too high, the required recording time may
be longer than the display time on screen.
●List of dubbing possible/impossible
Videos on HDD
Disc to be
dubbed
VIDEO Modes
(XTRA/FINE/STD) mixed
Wide/normal modes
(16:9/4:3) mixed
VIDEO Mode “STD” and
wide mode (16:9)
DVD-RAM
●
●
●
DVD-RW
(VR-mode)
●
●
●
DVD-RW
(VF-mode)
—
—
—
DVD-R
+RW
—
—
—
—
●*
●*
●: Dubbing possible; —: Dubbing impossible
* You cannot specify the combination of “VIDEO Mode: STD” and “16:9 On”.
●Note when dubbing:
• If message “Scene No.xxx is too large. Please divide this Scene before dubbing.” appears during dubbing, the
dubbing will stop. Divide the specified scene (see page 85), and then dub the divided scenes.
• The maximum number of scenes and programmes that can be dubbed will vary depending on the DVD used
(see page 155).
• With this DVD video camera/recorder, the scenes on HDD will be dubbed to a DVD in the order of display on
HDD Disc Navigation screen. To dub the scenes in a different order, create a play list on which scenes are
registered in the desired order of dubbing (see page 97), and then execute dubbing.
79
• If you want to dub only the scenes with dubbed marks
, “Category” in HDD setting should be designated
(see page 109).
• Marks
will appear for the thumbnails of the scenes which have been once
Al
l
Pr og r a
ms
001 / 014
dubbed. If the marks make the thumbnails difficult to see, you can turn off the
marks (see page 83).
• If a finalised disc or a heavily scratched or dirty disc is inserted into this DVD video
camera/recorder, a message will appear and dubbing will not be possible: Use
another disc.
PLAY
PHOTO
SELECT
• A DVD-RW/DVD-R dubbed on this DVD video camera/recorder will not be finalised: To play it back on a DVD
recorder, be sure to finalise it on this DVD video camera/recorder.
• The details of editing scenes on HDD (fade, skip, change of thumbnail, etc.) will not be reflected in the scenes
if they are dubbed on a DVD-RW (VF-mode)/DVD-R/+RW.
• If you combine scenes with different recording dates on a play list, and dub the combined scene to a DVD-
RAM/DVD-RW (VR-mode), the scenes will be dubbed separately for each date. However, if a combined scene
is subsequently divided, the scenes may not be dubbed separately for each date.
• If you dub scenes combined using the Disc Navigation function to a DVD-RW (VF-mode)/DVD-R/+RW, the two
scenes immediately before the combination (sometimes more than two scenes) will be dubbed.
• If you divide a scene using the Disc Navigation function, and then dub both the divided scenes to a DVD-RW
(VF-mode)/DVD-R/+RW, the scene before the division will be dubbed.
• Please note in advance that Hitachi will not accept any responsibility for compensation or loss of data,
or direct or indirect damage when dubbing is not performed normally due to a fault in this DVD video
camera/recorder.
FIRST-TIME (“NEW”) DUBBING
This option allows you to dub scenes without dubbed marks, among those recorded on HDD, to a
DVD beginning with the first scene without dubbed mark.
If those scenes cannot be included on one DVD, the capacity of scenes will be calculated and the
scenes will be dubbed up to capacity. When the DVD is replaced following the instruction on
replacement of DVD during dubbing, dubbing will start from the scene following: Repeat this
operation until dubbing of all scenes on HDD without dubbed marks is finished.
1
2
3
Press the DUBBING button.
The Dubbing Menu will appear.
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose “Scene”, “Dubbing”,
“Execute”, and then press the ꢇ button.
From the Dubbing
Pressing the 2 button at this time will allow
you to check the scenes to be dubbed to a
DVD that is loaded in the DVD video
camera/recorder: The scenes to be dubbed
will be encircled by a red cursor. To return to
the verification screen, press the ꢀ (STOP/
EXIT) button.
To stop dubbing, choose ŽNOž on the
verification screen, or press the ꢀ (STOP/
EXIT) button.
Dubbing Menu
Menu screen, choose
“New” and press the
ꢇ button.
New
Date
All
Select
Dubbing the scene which
isn't dubbed in HDD.
ENTER
EXIT
If no DVD is loaded in
this DVD video camera/recorder, a message
will appear: Press the DISC EJECT button,
and then load a DVD.
The screen for verification will appear:
Choose “YES” and press the ꢇ button.
Dubbing (New)
Dubbing (New)
Press 2
Press ꢀ
Dubbing scenes to DVD?
YES NO
ENTER
CHECK SCENE
RETURN
80
4
Replace the DVD.
5
6
After dubbing is finished, check the “Delete
Scene” screen.
Choosing “YES” will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose “NO”.
If one disc cannot contain all scenes, the
screen for verifying DVD replacement will
appear. To continue dubbing, press the DISC
EJECT button, and then replace the DVD:
Dubbing will restart from the scene
following.
To stop dubbing, press the ꢀ (STOP/EXIT)
Press DISC EJECT button to remove the DVD.
Close the cover of DVD insertion block.
button.
If you do not want to remove the DVD, press
the ꢀ (STOP/EXIT) button to end dubbing.
DUBBING SCENES RECORDED ON SAME DAY COLLECTIVELY (“DATE”
DUBBING)
This option allows you to collectively dub scenes recorded on HDD on one day, to a DVD.
If those scenes cannot be included on one DVD, the capacity of scenes will be calculated and the
scenes will be dubbed up to capacity. When the DVD is replaced following the instruction on
replacement of DVD during dubbing, dubbing will start from the scene following: Repeat this
operation until dubbing of all scenes recorded on HDD on one day is finished.
1
Press the DUBBING button.
The Dubbing Menu will appear.
5
Replace the DVD.
If one disc cannot contain all scenes, the
screen for verifying DVD replacement will
appear. To continue dubbing, press the DISC
EJECT button, and then replace the DVD:
Dubbing will restart from the scene
following.
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose “Scene”, “Dubbing”,
“Execute”, and then press the ꢇ button.
To stop dubbing, press the ꢀ (STOP/EXIT)
2
3
From the Dubbing Menu screen, choose
“Date” and press the ꢇ button.
If no DVD is loaded in this DVD video
camera/recorder, a message will appear:
Press the DISC EJECT button, and then load a
DVD.
button.
6
7
After dubbing is finished, check the “Delete
Scene” screen.
Choosing “YES” will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose “NO”.
From the “Select
S e l e c t D a t e
Date” screen, select
the date on which
scenes are to be
0 1
0 2
0 3 1 0 /
0 4 1 5 /
ENTER
1 /
5 /
3
3
3
3
/
/
/
/
2007
2007
2007
2007
Press DISC EJECT button to remove the DVD.
Close the cover of DVD insertion block.
dubbed, and then
press the ꢇ button.
If you do not want to remove the DVD, press
the ꢀ (STOP/EXIT) button to end dubbing.
If you have changed the title of programme
(see page 95), the title will appear on the
“Select Date” screen in place of the date.
4
The screen for verification will appear:
Choose “YES” and press the ꢇ button.
Pressing the 2 button at this time will allow
you to check the scenes to be dubbed to a
DVD that is loaded in the DVD video
camera/recorder: The scenes to be dubbed
will be encircled by a red cursor. To return to
the verification screen, press the ꢀ (STOP/
EXIT) button.
81
DUBBING ALL SCENES RECORDED ON HDD (DUBBING “ALL”)
You can dub all scenes recorded on the HDD to a DVD from the beginning in sequence.
If the scenes cannot be included on one DVD, count the capacity size of scenes, and dub the scenes
that can be stored on the DVD. Replace the disc during dubbing, following the screen for replacing
DVD: Dubbing will restart from the following scene. This operation will be repeated until all scenes
on the HDD are dubbed.
1
Press the DUBBING button.
The Dubbing Menu will appear.
4
Replace the DVD.
If one DVD cannot contain all scenes, the
screen for verifying disc replacement will
appear. To continue dubbing, press the DISC
EJECT button, and then replace the DVD.
Dubbing will restart from the scene
following. To stop dubbing, press ꢀ (STOP/
EXIT).
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose “Scene”, “Dubbing”,
“Execute”, and then press the ꢇ button.
2
3
From the Dubbing Menu screen, choose “All”
and press the
ꢇ
button.
5
6
After dubbing is finished, check the “Delete
Scene” screen.
Choosing “YES” will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose “NO”.
If no DVD is loaded in this DVD video
camera/recorder, a message will appear:
Press the DISC EJECT button, and then load a
DVD.
The screen for verification will appear: Choose
“YES” and press the
ꢇ
button.
Press the DISC EJECT button to remove the
DVD.
Close the cover of DVD insertion block.
If you do not want to remove the DVD, press
the ꢀ (STOP/EXIT) button to end dubbing.
Pressing the 2 button at this time will allow
you to check the scenes to be dubbed to a
DVD that is loaded in the DVD video
camera/recorder. The scenes to be dubbed
will be encircled by a red cursor. To return to
the verification screen, press the ꢀ (STOP/
EXIT) button.
82
SELECTING SCENES RECORDED ON HDD AND DUBBING THEM (SCENE
“SELECT” DUBBING)
You can select desired scenes recorded on HDD and dub only those scenes on DVDs.
1
Press the DUBBING button.
The Dubbing Menu will appear.
If the total capacity size of the selected scenes
exceeds the remaining free space on DVD, the
remaining bar at the top right of screen will
be red, and a message will appear. Select the
scenes again.
If you select a scene whose size exceeds one
DVD, a message that prompts you to divide it
will appear: After dividing the scene, execute
dubbing again.
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose “Scene”, “Dubbing”,
“Execute”, and then press the ꢇ button.
2
3
From the Dubbing Menu screen, choose
“Select” and press the ꢇ button.
If no DVD is loaded in this DVD video
camera/recorder, a message will appear:
Press the DISC EJECT button, and then load a
DVD.
4
Press the DUBBING button.
The screen for verifying dubbing will appear.
Instead of pressing the DUBBING button, you
can press the MENU button, choose “Edit”,
and then “Enter”: The same screen will appear.
Place the cursor on a scene to be dubbed, and
then press the ꢇ or PHOTO/SELECT
button: The cursor of the selected scene will
change to red (see p. 74), and the scene with
red cursor will be dubbed to a DVD.
Choosing “YES” will start dubbing.
To cancel dubbing, choose “NO” or press ꢀ
(STOP/EXIT).
5
6
When dubbing is finished, check the “Delete
Scene” screen.
Choosing “YES” will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose “NO”.
If you wish to dub other
scenes, place the cursor
on a scene in the same
way, and press the ꢇ
or PHOTO/SELECT
button to select it.
DVD remaining bar
Dubbing (Select)
DUB
ENTER
SELECT
To cancel a selected
Press the DISC EJECT button to remove the
DVD.
Close the cover of DVD insertion block.
If you do not want to remove the DVD, press
the ꢀ (STOP/EXIT) button to end dubbing.
scene, press the ꢇ or PHOTO/SELECT
button again. To cancel all selected scenes,
press ꢀ (STOP/EXIT).
TURNING OFF DUBBED MARK FROM THUMBNAIL (MARK OFF)
If the dubbed mark
makes the thumbnail difficult to see, you can turn off the mark.
1
2
Press the DISC NAVIGATION button, and
then press the MENU
4
If there is no change in the scene for which
you want to turn the mark off, press the ꢇ
button.
Choose “Scene”,
Sc ene
E
x e
c
u
t
e
“Dubbing”, “Mark
Off”, and then press the
ꢇ button.
5
Press the ꢀ (STOP/EXIT) button to end the
Ma
r
k
O f
f
Dubbing
mark-off procedure.
Note:
ENTER
RETURN
• You can use “New” dubbing to dub scenes with the
dubbed mark turned off.
The “Cancel Dubbed
Mark” screen will appear.
• Pressing the MENU button in step 3 will display the
submenu screen (see “Editing using submenu” on
page 85).
3
Place the cursor on a scene for which you
want to turn the dubbed mark off, and then
press the PHOTO/SELECT button.
You can also select multiple scenes.
83
Scene
HDD
ꢁꢂꢅ
DELETING SCENES (EDIT – DELETE)
You may want to delete unwanted scenes.
Scenes on DVD-RW (VF-mode)/DVD-R cannot be deleted, and menu item “Delete” will not appear
with DVD-RW (VF-mode)/DVD-R.
When using +RW, no scene can be deleted from the Disc Navigation menu, but the scenes recorded
last on it can be deleted (see page 69).
1
2
3
4
Press the DISC NAVIGATION button.
Place the cursor on the scene to be deleted.
Press the MENU button.
7
Press the ꢀ button to quit.
Note:
• To delete an unwanted part of a scene on DVD-RAM/
DVD-RW (VR-mode), divide the scene first, and then
delete the unnecessary part (see page 85).
• If you delete all data on HDD/DVD/card, initialising the
HDD/DVD/card will be recommended (see page 104).
• If the time of deleted scenes (stills) is quite short, the
remaining free space of HDD/DVD/card may not
increase in the HDD/DVD/card or card remaining
indicator.
Choose “Scene”, “Edit”, “Delete”, and then
press the ꢇ button.
When using card, choose “Scene”, “Delete”,
and then press the ꢇ button.
• The locked scenes on card cannot be deleted (see
page 91).
5
6
The “Delete Scene” screen will appear: If you
are sure you want to delete the selected scene,
press the ꢇ button.
If you want to change the scene to be deleted,
you can change it on this screen.
The screen for verifying deletion will appear:
Choose “YES”, and then press the ꢇ
button.
Choose “NO” to cancel deletion.
After Yes or No setting, the “Delete Scene”
screen will be restored.
Repeat steps 5 and 6 to delete other scenes.
84
●Editing using submenu
Press the MENU button before pressing the ꢇ button in step 5 (see page 84): The submenu will
appear.
1
Edit
Delete* ....................To delete selected scenes
Exit............................To restore the Disc Navigation screen
Start → Current.......To select scenes from the start to the one that the cursor is on
at the moment
Select
Current → End........To select scenes from the scene the cursor is on to the end
All .............................To select all scenes
Top............................To move the cursor to the first scene
End............................To move the cursor to the last scene
Go To
Pressing the ꢀ button will restore the screen in step 5.
1
* The menu item to be displayed will vary depending on the setting.
Note:
Although the submenu screen will appear for each setting, some menu items may not appear, depending on the
setting.
HDD
ꢁꢂ
DIVIDING MOVIES (EDIT – DIVIDE)
You can divide a scene into two parts.
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary
portion.
1
2
3
4
Press the DISC NAVIGATION button.
Place the cursor on the scene to be divided.
Press the MENU button.
Choose “NO” to cancel division.
After division, the “Divide Scene” screen will
be restored.
Repeat steps 5 – 7 to divide another scene.
8
Press the ꢀ button to quit.
Choose, “Scene”, “Edit”, “Divide” and then
press the ꢇ button.
Note:
• If you press the MENU button before pressing the
ꢇ button in step 5, the submenu will appear.
• Search and frame advance are useful when
designating division points.
5
The “Divide Scene” screen will appear: If you
are sure you want to divide the selected
scene, press the ꢇ button: The selected
scene will be played back.
• Combining scenes that were divided will restore the
original scene (see page 86).
• If a special effect has been added to the original
scene, the “IN” effect will be added to the first half of
scene, and the “OUT” effect, to the latter half.
• The division point may drift before or after the
designated point by approximately 0.5 seconds.
• Since a scene with a skip set cannot be played back,
no division point can be specified: Release the skip
for the scene before dividing it.
• If the division point is at a still, a message will appear,
but no division will be made.
• If the division point is at the start or end of a scene, a
message will appear, but no division will be made.
• A movie scene whose recording time is 0.5 seconds
or less cannot be divided.
If you want to change the scene to be divided,
you can change it on this screen.
6
7
When you reach the
Se l ect D i v i s i o n Po i n t
002
00 : 00 : 18
point where you want
to divide the scene,
press the PHOTO/
SELECT button.
PHOTO
ENTER
CANCEL
The status bar of
The screen for verifying
division will appear:
Choose “YES”, and then
press the ꢇ button.
scene being played
back can be switched
off or on by pressing
the DISPLAY button
• If free space available on HDD/DVD is insufficient,
division will not be possible: Delete unnecessary
scenes.
• If you divide a scene with dubbed mark , the
dubbed marks will appear on both divided scenes.
85
HDD
ꢁꢂ
COMBINING MULTIPLE SCENES (EDIT – COMBINE)
If you have recorded numerous short scenes, combining them will be facilitated by the use of Disc
Navigation.
Be sure to select consecutive multiple scenes: When using the HDD or a DVD-RAM, combining
scenes is possible only when “Category: All” is specified (p. 109). Stills cannot be combined.
1
2
Press the DISC NAVIGATION button.
6
The screen for verifying combination will
appear: Choose “YES”, and then press the
ꢇ button.
Press the MENU button, choose “Scene”,
“Edit”, “Combine”, and then press ꢇ
button.
The two images appearing on the verification
screen are those of the first and last scenes to
be combined.
Choose “NO” to cancel combination.
After Yes or No setting, the “Combine
Scenes” screen will be restored.
The thumbnail of the first scene will appear in
the combined scene.
Repeat steps 3 and 6 to combine other scenes.
3
4
The “Combine Scenes” screen will appear:
Point the cursor at the first scene to be
combined, and then press the ꢇ button.
The cursor will change to double frames of
blue and yellow.
Use the 2/1/0// buttons to
determine the range of scenes to be
combined, point the cursor at the last scene,
and then press the ꢇ button.
The cursor will change to a red frame. The
last scene will be double frames of red and
yellow.
7
Press the ꢀ button to quit.
Note:
• You can also select multiple scenes after step 1:
Press the MENU button to continue the procedure of
combination.
• If you press the MENU button before pressing the
ꢇ button in step 3, the submenu will appear (see
page 85).
• With fade effect, the “IN” effect of the first scene in the
selected range and the “OUT” effect on the last scene
will be attached to a combined scene.
• Scenes in different programmes (different recording
dates) cannot be combined: Create a play list first,
and then combine such scenes on the play list (see
page 97).
5
If you do not wish to change the scenes to be
combined, press the ꢇ button.
To change the scenes, press the ꢀ (STOP/
EXIT) button to return the cursor to yellow,
and then select the scenes to be combined
again.
• When using the HDD, scenes with different VIDEO
Modes or 16:9 mode cannot be combined.
• If you combine scenes with dubbed marks , the
dubbed marks will appear on the combined scene.
• If you combine scenes with and without dubbed mark
, the dubbed mark will not appear on the combined
scene.
HDD
ꢁꢂ
ARRANGING ORDER OF SCENES (EDIT – MOVE)
You can arrange scenes within a play list by moving them to desired positions (p. 102). Create a play
list first, and then arrange the scenes [“CREATING NEW PLAY LIST (CREATE)”, p. 97].
86
HDD
ꢁꢂ
DIRECTING SCENES EFFECTIVELY (EFFECT – FADE)
You can add fading to the beginning and/or end of scene.
There are three types of special effects:
Fade Out
Fade Out
Fade Out
Fade In
Fade In
Fade In
White:
Wipe:
B/W:
Fades in from white screen
Fades in from black screen
to vertical direction of screen
Fades out from vertical
direction of screen to black
screen
Fades in from Black and
Fades out to white screen
White screen to colour screen
Fades out from colour screen
to Black and White screen
1
2
Press the DISC NAVIGATION button.
7
Press the ꢀ button to quit.
Place the cursor on the scene to which fade is
to be added.
The “2” and/or “3” icon(s) will appear in
the scenes for which fade in and/or fade out
have been set.
3
4
Press the MENU button.
“In” effect
Choose, “Scene”, “Effect”, “Fade” and then
press the ꢇ button.
PLAY
5
The “Fade” screen will appear: If you are sure
you want to add the fade effect to the scene,
press the ꢇ button.
“Out” effect
Note:
• If a disc on which fade has been set on scene with
this DVD video camera/recorder is played on a DVD
recorder/player, or the scene is captured into a PC,
the set fade will not be reflected (see Note on
page 75).
• When dubbing on a DVD-RW (VF-mode)/DVD-R/
+RW, the setting on fade will not be reflected (see
page 79).
If you want to change the scene to which fade
is added, you can change it on this screen.
6
Select the special effects for “IN” and/or
“OUT”, choose “Enter”, and then press the
ꢇ button.
You can use the 2/1 buttons to move the
cursor to “IN”, “OUT”, “Enter” or “Cancel”.
Use the 0// buttons to choose the effect
to be added, and then press the ꢇ button
to set the effect.
To cancel setting, choose “Cancel”.
If you choose “Enter” and press the ꢇ
button, the “Fade” screen will be restored
after a message appears.
Repeat steps 5 and 6 to add fade to other
scenes.
87
HDD
ꢁꢂ
PLAYING BACK BY SKIPPING SCENES (EFFECT – SKIP)
You can specify “Skip” for scenes you do not want to play back: The selected scenes will be skipped.
1
2
Press the DISC NAVIGATION button.
6
Press the ꢀ button to quit.
Place the cursor on the scene to which skip is
to be set.
Multiple scenes can be selected for skipping
(p. 74).
A skip icon “
” will appear in the
thumbnail of any scene for which skipping
has been set.
Al l Pr o
Skip icon
3
4
Press the MENU button.
Choose “Scene”, “Effect”, “Skip”, and then
press the ꢇ button.
5
The “Set Skip” screen will appear: If you are
sure you want to skip the selected scene,
press the ꢇ button.
●Releasing Skip
Perform the same procedure as setting skip: The
skip icon will disappear and skipping of the
scene will be released.
If you want to change the scene to be
skipped, you can change it on this screen.
After skip setting, the “Set Skip” screen will
be restored.
Note:
• If you press the MENU button before pressing the
ꢇ button in step 5, the submenu screen will appear
(p. 85).
Repeat step 5 to set skipping of other scenes.
• If a disc on which skip has been set on scene with
this DVD video camera/recorder is played on a DVD
recorder/player, or the scene is captured into a PC,
the set skip will not be reflected (see Note on
page 75).
• When dubbing on a DVD-RW (VF-mode)/DVD-R/
+RW, the setting on skip will not be reflected (see
page 79).
88
HDD
ꢁꢂ
CHANGING IMAGES FOR THUMBNAILS (EFFECT – THUMBNAIL)
Normally, the first image of the recorded scene is displayed as a thumbnail: You can choose another
image of the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you
recorded from a glance at the Disc Navigation screen.
1
2
Press the DISC NAVIGATION button.
Note:
• If you press the MENU button before pressing the
ꢇ button in step 6, the submenu screen will appear
(p. 85).
Place the cursor on the scene whose
thumbnail you wish to change.
• A thumbnail of still cannot be changed.
• Since the scene to which skipping is set cannot be
played back, you will not be able to change its
thumbnail: Release the skip setting of the scene to
change the thumbnail.
• If a disc on which thumbnail has been set with this
DVD video camera/recorder is played on a DVD
recorder/player, or the scene is captured into a PC,
the set thumbnail will not be reflected (see Note on
page 75).
3
4
Press the MENU button.
Choose “Scene”, “Effect”, “Thumbnail”, and
then press the ꢇ button.
5
The “Change Thumbnail” screen will appear:
If you are sure you want to change the
thumbnail of the selected scene, press the
ꢇ button: The selected scene will be played
back.
• When dubbing on a DVD-RW (VF-mode)/DVD-R/
+RW, the setting on changing thumbnail will not be
reflected (see page 79).
If you want to change the scene whose
thumbnail is to be changed, you can change it
on this screen.
6
7
When the image you want to use as the
thumbnail of the scene appears, press the
PHOTO/SELECT button.
The screen for verifying switching of
thumbnail will appear: Choose “YES”, and
then press the ꢇ button.
Choose “NO” to cancel switching of
thumbnail.
After Yes or No setting, the “Change
Thumbnail” screen will be restored.
Repeat steps 5 – 7 to change the other scenes.
8
Press the ꢀ button to quit.
89
ꢁꢅ
COPYING STILLS ON DVD-RAM TO CARD (COPY)
• Set the DVD-RAM (recorded on a Hitachi DVD video camera/recorder
that can record photos on a DVD-RAM) that includes the photos you
wish to copy, and a card with recordable space, in this DVD video
camera/recorder.
Before You Begin
1
2
3
4
5
Set the power switch to “DVD“.
Press the DISC NAVIGATION button.
Place the cursor on the scene to be copied.
Press the MENU button.
Note:
• No movie can be copied.
• If you press the MENU button before pressing the
ꢇ button in step 6, the submenu screen will appear
(p. 85).
• See “Category” (p. 109) to check the stills recorded
on DVD-RAM.
• You can also select multiple scenes (p. 74).
• Even if all scenes, including movies, are selected to
be copied, only stills will be copied.
• Data on card cannot be copied to DVD.
Choose “Copy” on the “Scene” menu screen,
and then press the ꢇ button.
6
The “Copy to card” screen will appear: If you
are sure you want to copy the selected still,
press the ꢇ button.
If you want to change the still to be copied,
you can change it on this screen.
7
The screen for verifying copy will appear:
Choose “YES”, and then press the ꢇ
button.
Choose “NO” to cancel copy.
After Yes or No setting, the “Copy to card”
screen will be restored.
Repeat steps 6 and 7 to copy other stills to
card.
8
Press the ꢀ button to quit.
90
ꢅ
LOCKING SCENES ON CARD (LOCK)
You can lock each photo recorded on card so that it will not be deleted or edited by mistake.
1
2
3
Set the power switch to “SD”.
●To unlock the scene
Select the locked scene, and then use the
procedure shown on the left to unlock the scene:
The lock icon will disappear and locking will be
released.
Press the DISC NAVIGATION button.
Place the cursor on the scene to be locked.
You can also select multiple scenes (p. 74).
Note:
4
5
Press the MENU button.
• If you press the MENU button before pressing the
ꢇ button in step 6, the submenu screen will appear
(p. 85).
Choose “Lock” on the “Scene” menu screen,
and then press the ꢇ button.
• When initialising the card, the locked scenes will also
be deleted.
6
The “Lock Set” screen will appear: If you are
sure you want to lock the selected scene,
press the ꢇ button.
7 / 19
Lock icon
If you want to change the scene to be locked,
you can change it on this screen.
After setting, the “Lock Set” screen will be
restored.
Repeat step 6 to lock another scene.
7
Press the ꢀ button to quit.
The lock icon “&” will appear on any scene
for which lock has been set.
91
HDD
ꢁꢂꢃ
ꢄꢅ
SELECTING SCENES USING MENU SCREEN (SELECT)
You can use this “Select” function to select consecutive scenes at one time.
This function is useful when there are numerous scenes.
1
2
Press the DISC NAVIGATION button.
4
5
Choose “Select” on the “Scene” menu screen.
Point the cursor at the first or last scene to be
selected: When selecting all scenes, simply
proceed with step 3.
Choose “Start →
Sc ene
Ed
E f
Du bb i ng
Se e c t
De t
i
f
t
S
Cu
A
t
a
r
l
r
r
t
–
Cu
–
r
r en t
Current”, “Current →
End” or “All” and then
press the ꢇ button.
ec
t
en t
End
l
l
a
i
l
ENTER
RETURN
3
Press the MENU button.
●Deselecting selected scenes
Deselecting scenes one by one:
Deselecting all the selected scenes at once:
While you are displaying the “All Programs”
screen on which scenes have been selected, press
the ꢀ button.
While you are displaying the “All Programs”
screen on which scenes have been selected, place
the cursor on the scene to be deleted, and then
press the PHOTO/SELECT button.
Note:
Up to 999 scenes can be selected.
92
HDD
ꢁꢂꢃ
ꢄꢅ
DISPLAYING INFORMATION USING MENU SCREEN (DETAIL)
You can display various information for a scene: the recording mode, recording date/time and
length, special effects and movie quality mode.
1
2
Press the DISC NAVIGATION button.
Note:
• If multiple scenes have been selected, the total
recording time of the selected scenes (total number in
case of stills) will appear.
Place the cursor on the scene whose
information you wish to know.
(When using HDD/DVD)
3
Press the MENU button.
De t a i
V I DEO
( XTRA) :
( F NE) :
( STD )
( -
PHOTO
l
:
1m
0m
1m
0m
1m
0
i
i
i
i
i
n43sec
0sec
n43sec
(
(
(
(
(
2s c e n e s )
0s c e n e s )
2s c e n e s )
0s c e n e s )
0s c e n e s )
n
4ꢇ button.
Choose “Scene”, “Detail”, and then press the
I
*3
:
:
:
n
n
0sec
0sec
-
-
)
*1
*2
RETURN
The detailed information on the scene will
appear.
*1 Number of scenes whose quality mode is
unknown:
This will appear when the disc has a scene
recorded on a device other than this DVD video
camera/recorder, only if the disc has a scene
whose mode is unknown.
(When using HDD/DVD)
De
t
a
i
l
Sc e n e N o. 0 0 7
V
IDEO (F
1/ 3 / 2007
I
NE )
1m i n13 s e c
00 00
Da t
S k
e
p
:
:
8
:
:
i
O
f
f
*3
*1
*2
*2 This will appear with a DVD-RAM, including
photos recorded on a Hitachi DVD video camera/
recorder that has this capability.
Fa d e
I
N : None OUT :None
D u b b e d
PREV
NEXT
RETURN
(When using card)
*3 Not displayed with a DVD-RAM/DVD-RW/DVD-R
(finalised) /+RW that was recorded on another
device.
*4
*5
De
t
a
i
l
Sc e n e N o.
7
1 00–0007 ( 640
)
Da t
L o c k
e
:
:
1/
f
3
/ 2007
8
:
00
:
00
O
f
(When using card)
PREV
NEXT
RETURN
De t a i
l
*1 Not displayed with DVD-RW (VF-mode)/DVD-R/
+RW.
Scene No.
6
1 0 / 2007 12 : 5 0:00
3
/
Scene No.
1 5 / 3 / 2007
2
7
*2 When using the HDD, any scene whose
8
: 0 0:00
S c e n e s :
thumbnail has the dubbed mark
will appear.
RETURN
*3 Not displayed with DVD-RAM/DVD-RW/DVD-R
(finalised)/+RW recorded on another device .
*4 Will not appear if the loaded card does not
comply with DCF.
*5 Number of pixels on still in horizontal direction:
This may not appear with a JPEG file that does
not conform to this DVD video camera/recorder.
Note:
• DCF (Design rule for Camera File system) is a
unified image file format for video cameras: Image
files can be commonly used for all digital devices
that conform to DCF. This DVD video camera/
recorder complies with DCF.
• Pressing the / button will display information on
the following scene; pressing the 0 button will
display information on the preceding scene.
5
Press the ꢀ button to quit.
93
Programme
WHAT IS “PROGRAMME”?
Programme refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
Scene No. 1
Scene No. 2
Scene No. 3
Scene No. 4
Scene No. 5
Scene No. 6
9:00
Still
Movie
11:45 Still
13:30
Movie
17:20
20:00
Movie
10:20
Still
Programme No. 1
Recorded on March 10
HDD
ꢁꢂꢃ
ꢄ
SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)
Since the scenes recorded on this DVD video camera/recorder are collected as “programmes” for
each recording date, selecting a programme will allow you to display only the scenes on a specific
date.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
• Pressing the ꢀ button on the “Select Program” screen
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the programme may not
be a collection of recordings on the same date.
• If you change the video quality or switch the wide
mode with a +RW, multiple programmes will be
produced even if they are recorded on the same date.
Use the 2/1/0///ꢇ buttons to
choose “Select” on the “Program” menu
screen, and then press the ꢇ button.
4
Select the programme
S e l e c t P r og r a
m
to be displayed, and
then press the ꢇ
button.
A
l
l
Pr og r
a
ms
0 1
0 2
0 3 1 0 /
ENTER
1 /
5 /
3
3
3
/
/
/
2007
2007
2007
RETURN
The Disc Navigation
screen of the selected
programme will
appear.
03 10/
3
/ 2007
001 / 008
PLAY PHOTO SELECT
94
HDD
ꢁꢂꢃ
ꢄ
PLAYING BACK PROGRAMME (PLAY)
You can play back only the selected programme.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
4
Select the programme to be played back, and
then press the ꢇ button.
Playback will start from the first scene of the
selected programme.
Use the 2/1/0///ꢇ buttons to
choose “Play” on the “Program” menu
screen, and then press the ꢇ button.
Note:
If “Repeat Play: On” is specified, the selected
programme will be repeatedly played back (PLAYING
BACK SCENES REPEATEDLY (REPEAT PLAY),
p. 110).
HDD
ꢁꢂ
CHANGING TITLE OF PROGRAMME (TITLE)
The recording date/time has initially been attached to any programme.
You can change the recording date/time to any desired title.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
6
After entering the title,
choose “Enter” and
then press the ꢇ
button.
T I T L E
a
t
a
Pa
r
k
1
a
n
à
â
2
b
o
è
ê
3
c
p
ì
4
d
q
ò
ô
5
e
r
ù
û
6
f
s
á
ä
7
g
t
é
ë
8
h
u
í
9
i
v
ó
ö
0
j
w
ú
ü
SPACE
k
x
ã
ç
l
m
z
õ
y
ñ
ß
î
ï
2
En t e r
Cancel
SELECT
P H OTO
ENTER
DELETE
Choose “Title” on the “Program” menu
screen, and then press the ꢇ button.
7
The screen for verifying
the change in title will
appear: Choose “YES”,
and then press the ꢇ
button.
T I T L E
a
n
t
i
a
h
Pa
r
k
4
Select the programme
P r og r a
m
T
i
t
l
e
F
i
s
t
i
t
l
e
s
e
t
t
i
n g ?
whose title you want to
change, and then press
the ꢇ button.
0 1
0 2
0 3 1 0 /
1 /
5 /
3
3
3
/
/
/
2007
2007
2007
YES
NO
ENTER
ENTER
RETURN
The screen for setting a title will appear.
Use the 2/1/0/
Choose “NO” to cancel changing of the title.
After Yes or No setting, the Disc Navigation
screen of the selected programme will appear.
5/ buttons to select a
Title input bar
letter, and then press
the ꢇ button: The
selected letter will be
entered.
T I T L E
1 0 /
3
6
F
S
Á
Ä
/ 2007
1
2
3
C
P
Ì
4
5
7
G
T
8
H
U
Í
9
I
V
Ó
Ö
0
J
W
Ú
Ü
SPACE
A
N
À
Â
B
O
È
Ê
D
Q
Ò
Ô
E
R
Ù
Û
K
X
Ã
Ç
L
Y
Ñ
M
Z
Õ
É
Î
Ë
Ï
1
En t e r
Cancel
SELECT
P H OTO
INPUT
DELETE
Input mode
Repeat this procedure,
inputting letters one by
one to create a title.
Up to 20 characters can
be input.
Palette for selecting
characters
95
Note:
●Characters available for entering
title
You can choose the title input mode: “capital
letter”, “small letter” or “symbol”.
• If you wish to delete the letter for title, press the ꢀ
button once: The input letter will be deleted. Holding
down the ꢀ button will delete all letters in the TITLE
column.
• Pressing the PHOTO/SELECT button on the title
setting screen (in step 5) will change the cursor
position from the title input bar to character select
palette, input mode number, and then to “Cancel”. You
can also use the 2/1/0// buttons to move
the cursor up/down and to the left/right and change its
position.
To change the input mode in step 5, press the
DISPLAY button, or use the PHOTO/SELECT
button to place the cursor on the input mode,
and then press the ꢇ button.
T I T L E
3 0 /
3
6
F
S
Á
Ä
/ 2007
T I T L E
3 0 /
3
6
f
s
á
ä
/ 2007
• To cancel the setting of title, choose “NO” on the
screen for verifying the entered title: The screen for
verifying cancellation of title setting will appear. To
cancel title setting, choose “YES”.
1
2
3
C
P
Ì
4
5
7
G
T
8
H
U
Í
9
I
V
Ó
Ö
0
J
W
Ú
Ü
SPACE
1
a
n
à
â
2
b
o
è
ê
3
c
p
ì
4
d
q
ò
ô
5
e
r
ù
û
7
g
t
8
h
u
í
9
i
v
ó
ö
0
j
w
ú
ü
SPACE
A
N
À
Â
B
O
È
Ê
D
Q
Ò
Ô
E
R
Ù
Û
K
X
Ã
Ç
L
Y
Ñ
M
Z
Õ
k
x
ã
ç
l
m
z
õ
y
ñ
ß
É
é
Î
Ë
Ï
î
ë
ï
1
En t e r
DELETE
Cancel
P H OTO
2
En t e r
DELETE
Cancel
P H OTO
SELECT
CHANGE
SELECT
CHANGE
• If you press the ꢀ button on the screen for verifying
change in title, the title setting screen will be restored.
• Double byte characters set on other devices may be
displayed blank on this DVD video camera/recorder.
• Titles set on this DVD video camera/recorder may not
be visible on other devices.
Input mode
T I T L E
3 0 /
3
6
/ 2007
1
2
3
4
5
7
8
9
0
SPACE
3
En t e r
DELETE
Cancel
P H OTO
CHANGE
SELECT
96
HDD
ꢁꢂ
Play List
WHAT IS “PLAY LIST”?
You can create a play list on this DVD video camera/recorder by gathering your favourites from the
recorded scenes.
Since the play list is not created by copying data, you will consume little of the HDD/DVD capacity
by making a play list. On the other hand, deleting scenes on play list will not increase the remaining
HDD/DVD capacity for recording.
Example:
Programme 1
Programme 2
Play list 1 created
Play list of up to No. 99 can be created, and up to 999 scenes can be included in each play list of No. 1
to No. 99.
HDD
ꢁꢂ
CREATING NEW PLAY LIST (CREATE)
1
2
Press the DISC NAVIGATION button.
Note:
• Only the data on scenes is recorded on play list: If
you create or delete play lists, the original scenes in
programmes will not be erased.
Select the scenes to be programmed in a play
list.
You can select multiple scenes(p. 74).
Editing scenes on play list will not affect the scenes in
programmes.
• If the scene in a program had skip or fade setting, or
dubbed mark , that information will also be added
to the play list.
• You can add other scenes or remove unnecessary
scenes to/from the create play list (see pages 99–
101).
• The date/time when a play list was created will appear
as the title for the play list. This title can later be
changed (p. 103).
• If you press the MENU button before pressing the
ꢇ button in step 5, the submenu will appear (p. 85).
• If free space available on HDD/disc is insufficient,
creation of new play list may not be possible: Delete
unnecessary scenes.
3
4
Press the MENU button.
Use the 2/1/0///ꢇ buttons to
choose “Create” on the “PlayList” menu
screen, and then press the ꢇ button.
5
The “Create PlayList” screen will appear: If
the selected scenes on the play list are the
ones you want, press the ꢇ button.
If you want to change any of scenes you are
registering, you can also use this screen (see
pages 74 and 92).
6
When creation of a play list is complete, the
created play list will appear on the Disc
Navigation screen.
97
HDD
ꢁꢂ
SWITCHING TO DISPLAY OF EACH PLAY LIST (SELECT)
Select the desired one of multiple play lists: The Disc Navigation screen of the selected play list will
appear.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
4
Use the “Select Playlist” screen to select the
play list you wish to display, and then press
the ꢇ button.
Use the 2/1/0///ꢇ buttons to
choose “Select” on the “PlayList” menu
screen, and then press the ꢇ button.
The Disc Navigation screen of the selected
play list will be displayed.
Note:
To display the Disc Navigation screen showing all
programs (all recorded scenes), choose “All Programs”
on the “Select PlayList” screen.
●Editing on play list
Dubbing,
p. 79
p. 84
p. 89
p. 88
p. 87
p. 86
p. 85
p. 90
Deleting scene,
Changing thumbnail,
Setting skip,
When making settings on play list, such as
changing title, setting skip, adding fade, etc., use
the same procedure for setting on programme or
scenes. Perform these settings, referring to the
following reference pages:
Adding fade,
Combining scenes,
Dividing a scene,
Copying to card,
Changing title,
Arranging order of scenes
(only on play list)
p. 95, 103
p. 102
HDD
ꢁꢂ
PLAYING BACK A PLAY LIST (PLAY)
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
If “Repeat Play: On” is specified, the play list will be
repeatedly played back (p. 110).
Use the 2/1/0///ꢇ buttons to
choose “Play” on the “PlayList” menu screen,
and then press the ꢇ button.
4
Use the “Start Playlist” screen to select the
play list to be played back, and then press the
ꢇ button.
The selected play list will be played back
from the first scene. To cancel playback
midway, press the ꢀ button: The Disc
navigation screen of the play list being played
back will appear.
98
HDD
ꢁꢂ
ADDING SCENES TO PLAY LIST (EDITING PLAY LIST)
1
2
Press the DISC NAVIGATION button.
Press the MENU button.
5
Press the 1 button to move the cursor to the
lower row, and press the 0 or / button to
select the point where the scene is to be
inserted.
3//ꢇ buttons to
Use the 2/1/0/
P l a y L
Se e c
a y
C r e a t e
i
s
t
t
l
P
l
Ed
i
A
t
l
P
l a yL
P r o g r ams
i
s
t
l
0 0 4 / 0 1 4
choose “Edit” on the
“PlayList” menu screen,
and then press the ꢇ
button.
Ed
i
t
T
i
t
l
e
Scene to be added
Insertion position
D e l
ENTER
e
t e
RETURN
P
l
a yL
i
s
t
N
o .
0
1
0 0 8 / 0 0 8
0 0 8 / 0 0 8
PHOTO SELECT
ADD
*1 *2
4
Use the “Edit Playlist”
screen to select the play
list to which you wish
to add scenes, and then
press the ꢇ button.
Ed
i
t
P
l a y L
i
s
t
*1: Number of scene before insertion position cursor.
*2: Number of all scenes on play list.
01
02
03
04
1 /
5 /
1 0 /
1 5 /
3
3
3
3
/
/
/
/
2007
2007
2007
2007
1 2 : 30
8
: 00
9
: 30
1 5 : 15
ENTER
RETURN
6
Press the 2 button to move the cursor to the
upper row, and press the 0 or / button to
point the cursor to the scene to be added.
You can also select multiple scenes (p. 74).
The scenes of the
programme that was
displayed in step 1 will
appear in the upper
row, and the scenes of
selected play list will
appear in the lower
row.
Ed
i
t
l
P
l a yL
i
s
t
A
l
P r o g r ams
0 0 4 / 0 1 4
0 0 7 / 0 0 7
7
8
Press the ꢇ button to copy the scene.
P
l
a yL
i
s
t
N
o .
0
1
ADD PHOTO SELECT
After adding scenes is completed, the edited
play list will appear.
Repeat steps 5 – 7 to add other scenes.
Press the ꢀ button: The screen for verifying
exit will appear.
Note:
If you press the DISPLAY
button, the recording date/
time of the scene in which
the cursor is placed on the
operation guide will
Ed
i
t
l
P
l a yL
i
s
t
Choose “Yes”, and then end editing.
A
l
P r o g r ams
0 0 4 / 0 1 4
0 0 8 / 0 0 8
P
l
a yL
i
s
t
N
1
o .
0
1
Note:
1 / 3 / 2007
2
:
3 0: 0 0
• The “ ” mark shows the position where the scene is
to be added.
appear. When using the
HDD, pressing DISPLAY
again will display the
recording data of scene;
pressing it once more will return to the operating
guide. When using a disc, no recording data will
appear.
Recording date/time
• Each time the DISPLAY button is pressed, the
operation guide, the recording date/time of the
selected scene, video quality, screen aspect ratio, and
the recording length (when using HDD) will appear
(see page 67).
• Pressing the ꢀ button in the middle of adding scenes
will display the screen for verifying an exit from “Edit
PlayList”. Choose “YES” to exit the edition of play list.
Choosing “NO” will restore the “Edit PlayList” screen.
• If you press the MENU button in step 5 or 6, the
submenu screen for editing play list will appear. You
can also use this submenu to add scenes (p. 100).
• If you add a scene with dubbed mark, the mark will
also appear on the scene in play list.
99
HDD
ꢁꢂ
DELETING SCENES FROM PLAY LIST (EDITING PLAY LIST)
1
2
Press the DISC NAVIGATION button, and
then press the MENU button.
4
Press the ꢇ button.
Repeat steps 3 and 4 to delete other scenes.
Display the editing screen of the play list to
be edited.
5
Press the ꢀ button: The screen for verifying
exit will appear.
Perform steps 3 – 4 on page 99.
Choose “YES”, and then end editing.
3
Move the cursor to the play list in lower row,
and place the cursor on scene to be deleted.
You can also select multiple scenes (p. 74).
HDD
ꢁꢂ
ADDING SCENES USING SUBMENU FOR EDITING (EDITING PLAY LIST)
You can use the menu screen to add scenes to a play list.
1
2
Press the DISC NAVIGATION button, and
then press the MENU button.
6
Choose “Add”, and
then press the ꢇ
button.
Ed
i
t
a ms
0 0 4 / 0 1 4
0 0 7 / 0 0 7
Add
Ex
i
t
No . 0
3
Display the editing screen of the play list to
be edited.
ENTER
RETURN
Repeat steps 3 – 6 to
add other scenes.
Perform steps 3 – 4 on page 99.
7
Press the ꢀ button: The
screen for verifying exit
will appear.
Choose “YES”, and
then end editing.
Ed
i
t
P
l a yL
i
s
t
A
l
l
P r o g r ams
0 0 4 / 0 1 4
0 0 8 / 0 0 8
3
4
In the lower row of the play list, place the
green “ ” mark at the position where you
wish to insert a scene.
P
l
a yL
i
s
t
No . 03
PHOTO SELECT
ADD
Place the cursor on the scene to be added
from the upper row.
You can also select multiple scenes (p. 74).
Ed
i
t
P
l a yL
i
s
t
A
l
l
P r o g r ams
0 0 4 / 0 1 4
0 0 7 / 0 0 7
Scene to be added
Insertion position
P
l
a yL
i
s
t
No . 03
PHOTO SELECT
ADD
5
Press the MENU button.
100
HDD
ꢁꢂ
DELETING SCENES USING SUBMENU FOR EDITING (EDITING PLAY LIST)
You can delete scenes from play list on the editing screen.
1
2
Press the DISC NAVIGATION button, and
then press the MENU button.
5
Choose “Delete” on the “Edit” menu screen,
and then press the ꢇ button.
Display the editing screen of the play list to
be edited.
Repeat steps 3 – 5 other scenes can be deleted.
6
Press the ꢀ button: The screen for verifying
exit will appear.
Perform steps 3 – 4 on page 99.
Choose “Yes”, and then end editing.
3
4
Move the cursor to the play list in lower row.
Note:
• If all scenes on play list are deleted, the play list itself
Place the cursor on the scene to be deleted,
and then press the MENU button.
will also be deleted.
You can also select multiple scenes (p. 74).
HDD
ꢁꢂ
SELECTING SCENES USING SUBMENU FOR EDITING (EDITING PLAY
LIST)
You can specify the range of scenes when adding or deleting consecutive multiple scenes to/from
play list. This “Select” menu item is useful when selecting consecutive multiple scenes in items for
adding or deleting scenes.
1
2
Press the DISC NAVIGATION button, and
then press the MENU button.
4
5
Use the 2/1/0///ꢇ buttons to
choose “Start → Current”, “Current → End”,
“All” on the “Select” menu screen, and then
press the ꢇ button.
Display the editing screen of the play list to
be edited.
Note:
See page 92 for the status of scenes to be selected.
Perform steps 3 – 4 on page 99.
Press the ꢀ button: The screen for verifying
exit will appear.
Choose “Yes”, and then end editing.
3
Specify the first or last scene of those you
wish to select, and then press the MENU
button.
To select all scenes, simply press the MENU
button.
101
HDD
ꢁꢂ
ARRANGING ORDER OF SCENES (MOVE)
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
8
Move the “ ” mark to
Se
l
e c t
I
n s e r t P o
i
n
t
0 06 / 0 1 9
the position where you
wish to move the scene,
and then press the ꢇ
button.
ENTER
RETURN
Use the 2/1/0///ꢇ buttons to
choose “Select” on the “PlayList” menu
screen, and then press the ꢇ button.
Select the play list to be edited, and then press
the ꢇ button.
9
The screen for verifying move will appear:
Choose “YES”, and then press the ꢇ
button.
4
Place the cursor on the scene to be moved.
Choose “NO” to cancel move.
After Yes or No setting, the scene select screen
will be restored.
You can also select multiple scenes (see pages
74 and 92).
Repeat steps 7 – 9 to move another scene.
5
6
Press the MENU button.
10Press the ꢀ button to quit.
Choose “Scene”, “Edit”, “Move”, and then
press the ꢇ button.
Note:
• If you press the MENU button before pressing the
ꢇ button in step 7, the submenu screen will appear
(p. 85).
7
The “Move Scene” screen will appear: If you
are sure you want to move the scene, press
the ꢇ button.
• Only scenes on play list can be moved.
• When using DVD-RAM, scenes can be moved only
when “Category: All” is specified (p. 109).
If you want to change the scene selected in
step 4, you can do it on this screen.
102
HDD
ꢁꢂ
CHANGING TITLE OF PLAY LIST (TITLE)
The play lists have serial numbers in the order you have created them, along with the created dates/
times: You can change this title at any time.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
5
After changing the title, the Disc Navigation
screen on the play list whose title has been
changed will appear.
Use the 2/1/0///ꢇ buttons to
choose “Title” on the “PlayList” menu screen,
and then press the ꢇ button.
Note:
The registered title can be changed at any time using
the same procedure.
4
Use the “Playlist Title” screen to select the
play list whose title you wish to change, and
then press the ꢇ button.
See “CHANGING
P
l a y L
i
s
t
T i
t
l
e
TITLE OF
PROGRAMME
(TITLE)” on page 95 for
how to enter a title.
01
02
03
04
1 /
5 /
1 0 /
1 5 /
3
3
3
3
/
/
/
/
2007
2007
2007
2007
1 2 : 30
8
: 00
9
: 30
1 5 : 15
ENTER
RETURN
HDD
ꢁꢂ
DELETING PLAY LIST (DELETE)
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
• Even if you delete a play list, the original scenes
stored on HDD/DVD will not be deleted.
• If any play list is deleted, the number of play lists will
automatically be revised. (For example, if the No. 2
play list is deleted, the No. 3 play list will become No.
2 play list.)
Use the 2/1/0///ꢇ buttons to
choose “Delete” on the “PlayList” menu
screen, and then press the ꢇ button.
4
5
Use the “Delete Playlist” screen to select the
play list you wish to delete, and then press
the ꢇ button.
The screen for verifying deletion will appear:
Choose “YES”, and then press the ꢇ
button.
Choose “NO” to cancel deletion.
After Yes or No setting, the Disc Navigation
screen of all programmes will be restored.
103
HDD
ꢁꢂꢃ
ꢄꢅ
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will
start from that point.
MOVING TO BEGINNING (END) OF HDD/DVD/CARD
1
2
Press the DISC NAVIGATION button.
Press the MENU button.
3
Use the 2/1/0///ꢇ buttons to
choose “Top” or “End” on the “Go To” menu
screen, and then press the ꢇ button.
4
Press the ꢇ button to start playback.
HDD/DVD/Card Management
HDD
ꢁꢂꢃꢄꢅ
INITIALISING HDD/DVD/CARD
Initialising the HDD, a DVD-RAM/DVD-RW/+RW or card will allow you to delete any recorded
contents. Before using a DVD-RW/+RW on this video camera/recorder, you must format it.
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialisation. If the DVD video camera/recorder is turned off
during initialisation and the initialisation is interrupted, incorrect
initialisation will result and the incorrectly initialised disc will be
unusable.
Before You Begin
• If you insert a brand-new DVD-RW/+RW, message “DVD is not
formatted” will appear: Initialise the disc, following the subsequent
messages (p. 38).
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
• If you wish to delete all recorded contents, it is
recommended that you use initialisation, which will
delete all the scenes in much less time than using the
scene delete function.
Use the 2/1/0///ꢇ buttons to
choose “Format HDD”, “Format DVD” or
“Format Card” on the “HDD Setting”, “DVD
Setting” or “Card” menu screen, and then
press the ꢇ button.
•
Initialisation will delete all the recorded contents on HDD,
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialise a disc with many
scratches or dirt: Such a disc cannot be used (p. 9).
• This DVD video camera/recorder may not recognise
some discs or cards that have been initialised on PC
or a device other than this DVD video camera/
recorder.
• If you attempt to initialise a disc or card in this DVD
video camera/recorder when it is connected to PC via
PC connection cable, the disc or card may not be
initialised and may be unusable on this DVD video
camera/recorder.
The screen for verifying “Format HDD”,
“Format DVD” or “Format Card” will appear.
4
Choose “YES”, and then press the ꢇ
button.
• If you choose the VR mode when initialising a
finalised DVD-RW (VR-mode), the finalisation will not
be released. (The DVD-RW will be a finalised disc
without any recorded data, and recording will be
possible on it.)
When using DVD-RW, a screen for prompting
you to choose the VF or VR mode will appear.
Choose “NO” to cancel initialisation.
Choosing the VF mode will release the finalisation of
the disc.
104
HDD
ꢁꢂ
PROTECTION
You can protect the HDD and a DVD-RAM/DVD-RW (VR-mode) in order to prevent recorded
images from being erased or edited by mistake. Further recording will not be possible on protected
disc until the protection is released.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
• To release protection, perform steps 1-3: The screen
for verifying the release of protection will appear.
Choose “YES” to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
Use the 2/1/0///ꢇ buttons to
choose “Protect HDD”or “Protect DVD” on
the “HDD setting” or “DVD Setting” menu
screen, and then press the ꢇ button.
4
The screen for verifying protection will
appear:
Choose “YES”, and then press the ꢇ
button.
Choose “NO” to cancel protection.
After “YES” or “NO” setting, the Disc
Navigation screen will be restored.
HDD
ꢁꢂꢃ
ꢄꢅ
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
4
Press the ꢀ button to quit.
The Disc Navigation screen will be restored.
Use the 2/1/0///ꢇ buttons to
choose “Capacity” on the “HDD Setting”,
“DVD Setting” or “Card” menu screen, and
then press the ꢇ button.
Note:
If the HDD is protected, or a write-protected disc or
locked card is used, the remaining space will always be
displayed as “0”.
(When using HDD/
(When using card)
DVD)
Cap a c
A p p r o x .
V I DEO( XTRA) : 17
V I DEO( F NE) : 26
V I DEO( STD)
Cap a c
i
t
y
Cap a c
A p p r o x .
PHOTO( FINE) : 462
PHOTO( NORM) : 924
PHOTO( ECO) : 1848
i
t
y
m
m
m
i
i
i
n
n
n
*1
I
:
:
54
i
t
y
9 0%
Cap a c
i
t
y
:
9 6%
RETURN
RETURN
*1 With DVD-RW (VF-mode)/DVD-R: The quality
mode first used for recording with disc will appear.
105
HDD
ꢁꢂ
UPDATING CONTROL INFORMATION OF HDD/DVD-RAM/DVD-RW (VR-
MODE) (UPDATE CONTROL INFO.)
Disc Navigation in this DVD video camera/recorder handles information on scenes, such as
thumbnail, skip, fade, in a particular manner. If you use another device to edit a disc recorded on this
DVD video camera/recorder, and then use the data again with Disc Navigation in this DVD video
camera/recorder, the Disc Navigation may not appear normally. If this happens, use the Update
Control Info function to update the data.
• When using the AC adapter/charger to power the DVD video camera/
recorder for updating control information, make sure that power is not
turned off during updating. If the DVD video camera/recorder is turned
off during updating and the updating is interrupted, the control
information will not be updated correctly.
Before You Begin
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
4
Choose “YES”, and then
press the ꢇ button.
Upda te Con
t
r
o
l
Infor mat ion
Upda te Con
YES
t
r
o
l
I
n
for mat
i
on?
NO
The message for
proceeding will appear,
and then the Disc Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
ENTER
Use the 2/1/0///ꢇ buttons to
choose “Update Control Info.” on the “HDD
Setting” or “DVD Setting” menu screen, and
then press the ꢇ button.
The screen for verifying “Update Control
Information” will appear.
Choose “NO” to cancel updating.
Note:
• It may take time to update the control information if
the HDD/disc has many recorded scenes.
• Even if control information is updated, some discs will
be unusable on Disc Navigation of this DVD video
camera/recorder.
HDD
DELETING DATA ON HDD (FULL FORMAT)
Executing “Format HDD” in “HDD Setting” to delete data on HDD will only change the file control
information: It will not delete the data completely. When discarding or transferring this DVD video
camera/recorder, be sure to delete any personal data on the HDD in order to prevent it from leaking out.
•
Use the AC adapter/charger to power the DVD video camera/recorder when
completely deleting the data on the HDD: This is not possible with a battery.
• If power is turned off and Full Format is interrupted midway, normal
deletion will not be possible.
Before You Begin
• Executing Full Format will delete all data on the HDD. Save any
important data on DVD before starting complete deletion.
• It will take approx. 40 minutes for complete deletion: In rare case, it may
take more than one hour.
1
2
Press the DISC NAVIGATION button, and
then the MENU button.
3
Choose “YES”, and then press the ꢇ button.
The HDD will be completely cleared.
To cancel clear, choose “NO”: The Disc
Navigation screen will be restored.
Use the 2/1/0// buttons to choose
“HDD Setting”, “Full Format”, and then press
the ꢇ button: The “HDD Full Format”
screen will appear.
Note:
• Pressing the ꢀ (STOP/EXIT) button during full
formatting will stop the formatting. Take care,
however: Even if full formatting stops midway, all data
on HDD will be deleted.
106
ꢂꢃ
ꢄ
FINALISING DVD-RW/DVD-R/+RW (FINALIZE DVD)
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder when finalising a DVD-RW/DVD-R/+RW. Finalisation cannot be
executed using a battery. If the DVD video camera/recorder is turned off
during finalisation and the finalisation is interrupted, incorrect
Before You Begin
finalisation will result, and at worst, the disc may be damaged.
If you want to play back a DVD-RW/DVD-R recorded/dubbed on this DVD video camera/
recorder, using a device conforming to 8 cm DVD disc – such as a DVD recorder/player, etc. – you
must finalise the disc on this DVD video camera/recorder.
If you wish to display the DVD video menu when playing back a +RW on a DVD player or DVD
recorder, finalise it using the Disc Navigation menu.
No further recording/dubbing can be done on a finalised DVD-RW (VF-mode)/DVD-R/+RW. You can,
however, unfinalise the DVD-RW (VF-mode)/+RW so that other scenes can be recorded/dubbed on it.
Additional recording/dubbing is possible on a finalised DVD-RW (VR-mode): Unfinalising is not necessary.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Note:
• Do not use any other device to finalise a disc
recorded/dubbed on this DVD video camera/recorder.
• If the disc in the DVD video camera/recorder has
already been finalised, you cannot choose “Finalize
DVD”.
Use the 2/1/0///ꢇ buttons to
choose “Finalize DVD” on the “DVD Setting”
menu screen, and then press the ꢇ button.
• The time required to finalise disc that appears on the
“Finalize DVD” screen is only for reference.
• The shorter the recording time on disc, the longer it
will take to finalise it.
• The second and later finalisation will be faster with a
disc which has previously been finalised.
The disc will be finalised.
4
Choose “YES”, and then
F i n a l i z e DV D
F u r t h e r r e c o r d i n g o n t h i s
DV D w i l l b e i m p o s s i b l e .
press the ꢇ button.
F i n a l i z e ? ( A p p r o x . 3 m i n . )
YES NO
●Using FINALIZE button to finalise
a disc
Press the FINALIZE button during recording
pause: The screen shown in step 4 above will
appear. Choose “YES”, and then press the ꢇ
button: Finalising will start.
The message showing
that the disc is being
finalised will appear,
and the disc will then be
finalised.
ENTER
*2
*1
*1 Displayed only when
a DVD-R is used.
*2 Will vary depending
on the recording
time.
5
When finalisation is complete, the Disc
Navigation screen of all programmes will
appear.
FINALIZE
' will appear on the Disc Navigation screen
for a finalised disc.
Al
l
Pr og r a
m
s
001/ 015
PLAY PHOTO SELECT
Finalised disc
001 / 010
1
/
3
:
/
2
0
:
0
0
7
0
5
/
3
:
/
2
0
:
0
0
7
0
7
/
3
:
/
2
0
:
0
0
7
0
1
0
/
3
:
/
2
0
:
0
0
7
0
8
8
0
0
8
8
0
0
1
0
0
0
1
0
0
0
1
5
/
3
:
/
0
2
0
0
:
0
0
7
0
1
8
/
3
:
/
0
2
0
0
:
0
0
7
0
2
0
/
1
3
:
/
0
2
0
0
:
0
0
7
0
2
3
/
1
3
:
/
0
2
0
0
:
0
0
7
0
0
0
TOP
PREV
NEXT
END
Screen when viewed on DVD recorder/player
(DVD-RW (VF-mode)/DVD-R/+RW)
107
ꢃꢄ
ADDITIONALLY RECORDING ON FINALISED DVD-RW (VF-MODE)/+RW
(UNFINALIZE DVD)
You can unfinalise the DVD-RW (VF-mode)/+RW finalised on this DVD video camera/recorder so
that additional recording can be done on it.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Use the 2/1/0///ꢇ buttons to
choose “Unfinalize DVD” on the “DVD
Setting” menu screen, and then press the ꢇ
button.
The screen for verifying unfinalisation will
appear.
4
Choose “YES”, and then press the ꢇ
button.
The message showing that the disc is being
unfinalised will appear, and the disc will then
be unfinalised.
Note:
• A finalised DVD-RW (VR-mode) can be recorded as
is, without being unfinalised.
108
Others
HDD
DISPLAYING DUBBED/UNDUBBED SCENES IN LIST (CATEGORY)
You can display all scenes recorded on HDD in this DVD video camera/recorder, by dividing them
into those dubbed to DVD and not yet dubbed, on the Disc Navigation screen.
1
2
Press the DISC NAVIGATION button, and
then press the MENU button.
“Dubbed”: Only scenes with dubbed marks
will be displayed in chronological
order of recording.
“Un Dubbed”: Only scenes without dubbed
marks will be displayed in
chronological order of
Use the 2/1/0///ꢇ buttons to
choose “Others”, “Category”, and then press
the ꢇ button.
recording.
3
Choose the option to be set, and then press
the ꢇ button:
Note:
• Dubbed mark
dubbed to DVD.
• Exiting the Disc Navigation screen will return
“Category” to “All”.
will appear on thumbnails of scenes
“All”: All scenes will be displayed in
chronological order of recording
regardless of whether they have been
dubbed or not.
• To dub only the scenes with dubbed marks, choose
“Dubbed”, and then execute “Select” dubbing.
ꢁ
DISPLAYING MOVIES OR STILLS INDEPENDENTLY (CATEGORY)
If you insert a DVD-RAM that includes photos recorded on a DVD video camera/recorder other
than DZ-HS500SW, the scenes on the disc will be displayed in the order of recording, regardless of
whether they are movies or stills.
Scenes recorded on this DVD video camera/recorder will be displayed in the order of recording
regardless of whether they are movies or stills. You can use the Disc Navigation screen to switch this
display to stills only or movies only.
DZ-HS500SW cannot record any photos on a HDD/DVD.
1
2
Press the DISC NAVIGATION button.
Press the MENU button.
4
Specify the desired
option for display, and
then press the ꢇ
button.
Al
l
Pr og r a
m
s
006 / 015
PLAY PHOTO SELECT
3//ꢇ buttons to
Use the 2/1/0/
O t h e r s
(When “PHOTO” is
specified)
C a t e g o r y
R e p e a t P l a y
T V Ty p e
A l
V I DEO
PHOTO
l
choose “Category” on
the “Others” menu
screen, and then press
the ꢇ button.
ENTER
RETURN
All:
To display all scenes, movies or stills,
in the order of recording.
VIDEO: To display only movies in the order of
recording.
PHOTO: To display only photos in the order of
recording.
Note:
• When the Disc Navigation screen is finished,
“Category: All” will be restored.
109
HDD
ꢁꢂꢃ
ꢄ
PLAYING BACK SCENES REPEATEDLY (REPEAT PLAY)
1
2
Press the DISC NAVIGATION button.
Press the MENU button.
If the range for playback has been specified:
Playback of the scenes in that range will repeat.
See page 74 and 92 when selecting multiple scenes.
3//ꢇ buttons to
Use the 2/1/0/
●To release Repeat Play
O t h e r s
C a t e g o r y
R e p e a t P l a y
T V Ty p e
On
Off
Use one of the following 3 methods to release:
• Choose “Off” in step 4 on the left.
• Turn the DVD video camera/recorder off
once.
• Press the DISC EJECT button to remove the
disc.
choose “Repeat Play”
on the “Others” menu
screen, and then press
the ꢇ button.
ENTER
RETURN
4
Choose “On”, and then press the ꢇ button:
Note:
Playback will start.
• Press the ꢀ button to terminate playback. However,
the Repeat Play setting will not be cancelled.
• When using a DVD-RAM, photos will also be played
back repeatedly.
Choose “Off” to cancel Repeat Play setting.
• Repeat playback will not function when playback is
instructed from the recording pause status.
●When Repeat Play is set
If one scene has been specified: When playback
of the last scene is finished, playback of all
scenes will repeat from the first scene.
HDD
ꢁꢂꢃ
ꢄ
PLAYING BACK WIDE-MODE IMAGES ON 4:3 DISPLAY TV (TV TYPE)
If you connect the DVD video camera/recorder with a disc recorded in wide mode to a TV with 4:3
display only and play it back, vertically long images will appear. You can specify “TV type: 4:3” to
display 4:3 images on the TV.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
4
Choose “4:3”, and then press the ꢇ button.
O t h e r s
16:9
4:3
C a t e g o r y
R e p e a t P l a y
T V Ty p e
Use the 2/1/0///ꢇ buttons to
choose “TV type” on the “Others” menu
screen, and then press the ꢇ button.
ENTER
RETURN
110
ꢅ
SLIDE SHOW (CONTINUOUS PLAYBACK OF STILLS)
If you play back stills recorded on a card, the DVD video camera/recorder will enter the playback
pause status after each still is played back.
Setting Slide Show allows you to continuously play back stills.
1
2
3
Press the DISC NAVIGATION button.
Press the MENU button.
Use the 2/1/0///ꢇ buttons to
choose “Slide Show”, “Start”, and then press
the ꢇ button.
Start: To start a slide show.
When playback is finished, the DVD video
camera/recorder will enter the playback
pause status at the final still.
Pressing the ꢀ button will restore the Disc
Navigation screen.
Note:
• With slide show, playback will start from the first photo
on card regardless of the position of cursor or
whether you attempt to select scenes.
• If you press the ꢀ button or turn the DVD video
camera/recorder off, Slide Show will be cancelled.
111
HDD
ꢁꢂꢃ
ꢄꢅ
Viewing on TV Screen
Connecting to
a
TV
CONNECTING TO A TV
Use the provided AV/S input/output cable to connect the DVD video camera/recorder to a TV as
follows:
To S-VIDEO
input jack*
To video/audio
input jacks
To AV input/output jack
Red
AV/S input/output cable
(provided)
White
Yellow
* If your TV has an S-VIDEO input jack, you can connect the S-VIDEO plug to it.
Note:
• Using S-VIDEO will deliver clearer playback status.
• Before connecting, make sure that the volume on TV
is turned down: Forgetting this may cause howling
from the TV speakers.
• Insert the AV/S input/output cable plugs into jacks
straight: Obliquely inserting them could damage the
jacks.
Stereo Type with
S-VIDEO Jack
Stereo Type
Monaural Type
S-VIDEO
AUDIO VIDEO
L
AUDIO VIDEO
L
AUDIO
VIDEO
R
R
White
Yellow
Red
Yellow
Red
White
White
112
HDD
ꢁꢂꢃ
ꢄꢅ
VIEWING ON TV SCREEN
1
Turn the TV on and set the input selector to
“VCR” whichever applicable Video input.
Note:
• Adjust the volume of sound on TV.
• Information during recording and playback will appear
on the TV screen: You can also switch off the display
during recording. Refer to “SETTING ON-SCREEN
DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)” on
page 65.
Refer to the TV instruction manual for how to
switch the TV input.
2
Turn the DVD video camera/recorder on.
• When copy-guarded disc is played back, no image will
appear on TV screen.
• If you use TV with wide mode (aspect ratio 16:9) and
set the TV to the wide mode, the entire Disc
Navigation display may not be displayed on the TV
screen. If this happens, release the wide mode setting
on TV (see the TV instruction manual for releasing the
wide mode).
The image that the DVD video camera/
recorder is seeing will appear on the TV
screen.
You can also monitor the image on the LCD
screen or viewfinder of the DVD video
camera/recorder.
3
Perform playback, recording or editing.
You can perform playback, recording or
editing on Disc Navigation while checking on
TV screen.
113
ꢁꢂꢃ
ꢄ
Playback on DVD Recorder/Player
PLAYING BACK DVD-RAM/DVD-RW (VR-MODE)
You can use a DVD recorder or DVD player that conforms to DVD-RAM/DVD-RW (VR-mode) to play
back 8 cm DVD-RAM/DVD-RW (VR-mode) recorded on this DVD video camera/recorder.
1
Insert the disc into the DVD recorder/player
and play it back.
Note:
• When playing back disc on another device, the Disc
Navigation display will be different from the one on
this DVD video camera/recorder.
See the instruction manual for DVD
recorder/player.
• Finalising DVD-RW (VR-mode) may be necessary.
• Do not insert a DVD-RW (VR-mode) that was
recorded on this DVD video camera/recorder into a
device that does not conform to 8cm DVD-RW (VR-
mode): Doing so may make the disc unusable.
• DVD-RAM/DVD-RW (VR-mode) recorded on this DVD
video camera/recorder can be played back on other
DVD recorder/players or other devices conforming to
8 cm DVD-RAM/DVD-RW (VR-mode), but playback
on all DVD recorder/players is not guaranteed.
PLAYING BACK DVD-RW (VF-MODE)/DVD-R/+RW
1
Finalise a recorded DVD-RW (VF-mode)/
DVD-R/+RW.
Note:
• Do not insert a DVD-RW (VF-mode)/DVD-R that has
not been finalised into any DVD recorder: The disc
may be unusable.
You need to finalise a disc to play it back on
DVD recorder/player: See page 107.
No further data can be recorded on finalised
disc.
• Do not insert a DVD-RW (VF-mode)/DVD-R/+RW
recorded on another DVD recorder and not finalised,
in this DVD video camera/recorder: Doing so will
make the disc unusable.
• A recorded +RW is automatically finalised when it is
removed from the DVD video camera/recorder even if
you do not use the Disc Navigation function to finalise
it (p. 107) (auto-finalise). An auto-finalised +RW can
be played back on a DVD recorder/player, etc., but no
DVD video menu will appear. To display the DVD
video menu on a DVD recorder/player, etc., finalise
the +RW using the Disc Navigation function before
playing it back on a DVD recorder/player, etc.
• A +RW with a shorter recording time may not be
playable on a DVD recorder/player, etc. if it has been
auto-finalised. In this case, use the Disc Navigation
function to finalise the +RW.
Note:
Use this DVD video camera/recorder to finalise the
DVD-RW/DVD-R/+RW recorded on the DVD video
camera/recorder.
2
Insert the disc into the DVD recorder/player
and play it back.
See the instruction manual for DVD
recorder/player.
• DVD-RW (VF-mode)/DVD-R/+RW recorded on this
DVD video camera/recorder can be played back on
other DVD recorder/players or other devices
conforming to 8 cm DVD-RW (VF-mode)/DVD-R/+RW,
but playback on all DVD recorder/players is not
guaranteed.
• Playback may not be possible on some DVD recorder/
players, or it may depend on the recorded status of
DVD-RW (VF-mode)/DVD-R/+RW: In such cases,
play back the DVD-RW (VF-mode)/DVD-R/+RW on
this DVD video camera/recorder. Also, playback on
DVD recorder/players may stop momentarily between
scenes.
114
HDD
ꢁꢂꢃ
ꢄꢅ
Recording (Dubbing) Images
• Before connecting this DVD video camera/recorder to another device,
be sure to turn both devices off.
• Insert a recordable disc*1 or card*2 into this DVD video camera/recorder
(see page 23 and 24).
No photo can be recorded.
Only photos can be recorded: No video can be recorded.
1
Before You Begin
*
*
2
• If you operate the DVD video camera/recorder connected to another
device, always power the camera/recorder from AC outlet using the AC
adapter/charger.
RECORDING (DUBBING) IMAGES FROM OTHER VIDEO DEVICE
You can record (dub) images from other video devices to disc or card in this DVD video camera/
recorder.
Use the AV/S input/output cable (provided) to connect the DVD video camera/recorder to the
other video device as follows:
Signal flow
To video/audio
To AV input/output jack
output jacks
Red
AV/S input/output cable
White
(provided)
Yellow
115
1
Set the input source on
the DVD video camera/
recorder to “LINE (L
IN)”.
Note:
L
IN
0 0 : 0 0 : 0 0
REM3
MIN
• Reduce the volume of external input sound heard
from the built-in speaker: The loud volume may cause
noise to enter the recorded image.
0
8
:
0
0
0
7
FINE
1
/
3
/
2
0
• The recorded contents can be played back in the
same manner as when playing back camera images
recorded on this DVD video camera/recorder.
• The “Input Source” setting will return to “CAMERA”
whenever DVD video camera/recorder is turned off.
• Recording of most images is prohibited by the copy-
guard signal to protect the copyright, except for
images recorded on camcorders for personal
enjoyment. “COPY PROTECTED” appears in these
images: They cannot be recorded on this DVD video
camera/recorder.
Typical copyright protected images include those of
DVD video, LD, recorded video tapes, some parts of
digital satellite broadcasts, etc.
• If a video signal that cannot be read by this DVD
video camera/recorder is present – even in images
recorded on camcorder for personal enjoyment
without copy-guard signal – the input image may not
be recorded normally.
Switch the input referring to “Input Source”
on page 63.
2
3
Turn on the connected device, and start
playback.
The picture will appear on the LCD screen or
viewfinder of this DVD video camera/
recorder.
Press the REC button.
Recording will start on this DVD video
camera/recorder.
The operation of this line-input recording is
the same as for recording movie.
Press the PHOTO/SELECT button when
recording a photo.
• If the input signal is interrupted by switching the
channel on TV or switching the signal using video
selector, normal recording cannot be performed.
• No “copy-once” image can be recorded on this DVD
video camera/recorder even if a disc conforming to
CPRM (Content Protection for Recordable Media) is
used.
• When recorded images are played back on PC, black
bands may appear at the top/bottom and on the left
and right of screen.
116
RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES
You can record (dub) images played back on this DVD video camera/recorder, on other video
devices.
Use the AV/S input/output cable (provided) to connect the DVD video camera/recorder to another
video device as shown in the following figure:
Signal flow
To S-VIDEO
input jack of
VCR, etc.
To video/audio
input jacks
To AV input/output jack
*
Red
AV/S input/output cable
(provided)
White
Yellow
* If the video device to be connected has an S-VIDEO input jack, you can connect it to the DVD video camera/
recorder.
1
2
3
Press the DISC NAVIGATION button.
Select a scene to be played back.
Note:
• Using S-VIDEO will enable you to record clearer
images.
• Reduce the volume of external input sound heard
from the built-in speaker: The loud volume may cause
noise to enter the recorded image.
• It is recommended that you use Disc Navigation to
create a play list including the scenes to be dubbed
among the scenes recorded on this DVD video
camera/recorder (p. 97).
Set the channel of the connected video device
to an external input.
4
Press the playback (ꢇ) button on this DVD
video camera/recorder and the record button
on connected device: The DVD video
camera/recorder will start playback and the
recorded device will record (dub) it.
117
HDD
ꢁꢂꢃ
ꢄꢅ
Connecting to PC
Connecting to PC
Software Provided
You can utilise on PC the videos and photos recorded on this DVD video camera/recorder, using the
PC connection cable and software CD-ROM provided, or generally available software.
The provided CD-ROM contains the following software for Windows and Macintosh:
Windows
ImageMixer 3
This allows you to import the images recorded on the DVD video camera/recorder into PC.
You can play back imported images, cut-edit them, add titles and BGM, and edit videos, e.g.,
attach image switching effect.
You can also create a DVD-Video (DVD-RW/DVD-R) and DVD-VR (DVD-RAM/DVD-RW) by
importing the images recorded on the DVD video camera/recorder into PC.
Macintosh
ImageMixer 3 Mac Edition for DVDCAM
This allows you to import the images recorded on the DVD video camera/recorder into
Macintosh as an MPEG file.
You can combine imported images, cut-edit them, etc.
You can also create a DVD-Video (DVD-RW/DVD-R) by importing the images recorded on the
DVD video camera/recorder into Macintosh.
• The following are available on the provided software:
OS
HDD
●
Disc
●
Card
Read
Write
Read
Write
●
Windows
*2
—
●
—
●
●
●
Macintosh
*1
*2
—
●
—
*1
*2
No DVD-VR [DVD-RAM/DVD-RW (VR-mode)] can be created.
Writing to card using Explorer/Finder is possible.
Note:
• Finalise the DVD-RW/DVD-R recorded on the DVD video camera/recorder before using it on PC.
• You cannot create a DVD-VR (DVD-RAM/DVD-RW) on the Macintosh software.
• Since the audio format of the MPEG file imported into Macintosh using ImageMixer 3 Mac Edition for DVDCAM is
AC3 audio, no audio will be played back even on QuickTime MPEG-2 playback component and only video is
played back. Use ImageMixer 3 Mac Edition for DVDCAM to play back imported MPEG files.
• The software provided with this DVD video camera/recorder cannot handle copyright-protected DVDs, such as
CPRM and CSS.
The provided software can handle Japanese, English, German, French, Spanish, Italian and Chinese
(simplified).
For explanation, this manual uses Windows XP screens for Windows and Mac OS X 10.4 screens for
Macintosh.
118
Before unpacking the provided software CD-ROM, read the Licence Agreement on page 159.
Requirements of available PC
[When using Windows]
• OS:
Windows® 2000 Professional SP3 or higher
Windows® XP Home Edition
Windows® XP Professional Edition
See the following Websites to fine out whether the provided software can be used on
Windows Vista:
PIXELA PC Software Support Centre
URL:http://www.pixela.co.jp/oem/hitachi/e/index.html
DVDCAM PC Software Support Centre
URL: http://dvdcam-pc.support.hitachi.ca/
• Computer: IBM® PC/AT® compatible, with the above OS preinstalled.
• CPU:
Intel® Pentium® III 800 MHz or higher; or Pentium® 4, Celeron or AMD® Athlon XP/
Duron whose performance is equivalent (Pentium® 4, 1.7 GHz or higher is
recommended)
Operation is not guaranteed if the CPU is overclocked or dual CPU is used.
• Memory: Windows® 2000 Professional: At least 128 MB (256 MB or more is recommended)
Windows® XP Home Edition/Professional Edition: At least 256 MB (512 MB or more
is recommended)
• HDD:
Free space of at least 300 MB (needed to install the application)
Free space necessary for creating a DVD:
At least 14 GB for work folder (at least 28 GB for a double-layer disc).
Displayable with at least 1024 × 768 pixels and 16 bits (High colour)
Graphics accelerator with VRAM of at least 4 MB, compatible with DirectX® 9.0c or
higher
• Display:
• Sound:
• Other:
Sound Blaster or its equivalent
Environment where DirectX® 9.0c can operate normally
[When using Macintosh]
• OS:
Mac OS X v10.3.9, v10.4.2-v10.4.8
The provided software cannot be used on Mac OS X Server.
PowerPC G4 1 GHz or higher, PowerPC G5, Intel Core
• CPU:
• Memory: At least 256 MB (512 MB or more is recommended)
• HDD:
Free space needed for installation: Approx. 30 MB
To create a DVD, free space of at least twice that of disc to be created will be required.
• Graphics: At least 1024 × 768 pixels (full-colour is recommended)
• Compatible drive: SuperDrive mounted in Macintosh in standard
The slot-in type drive of Macintosh is not compatible with an 8 cm disc: Be sure not to use the
drive, since a disc inserted by mistake cannot be removed.
Note:
• You must have the administrator authority of the PC before installing software.
• Operation is not guaranteed in the following cases:
- When connected via USB hub
- Multiprocessor is not supported
- When used on your custom-made PC
• Even when your PC satisfies the above conditions of available PC, malfunction may result or restriction in use
may occur, depending on the combination of other software in PC or peripheral devices.
• Operation is not guaranteed on all PCs that satisfy the above recommended environment.
119
Installing Software
[When using Windows]
1
Turn the PC on.
If you have been using the PC, terminate all
running software programmes.
5
Checking licence agreement:
Carefully read the licence agreement: If you
accept the contents, choose “I accept the
terms of the license agreement”, and then
click “Next”.
2
Insert the provided CD-ROM into the CD-
ROM drive of PC.
The installer will automatically start, and the
“Choose Setup language” screen will
automatically appear.
If the “Choose Setup language” screen does
not appear, use Windows My Computer or
Explorer to open the drive in which the CD-
ROM is located, and then double-click the
setup.exe icon in it. (Extension “exe” may not
appear depending on the PC used.)
3
Choose the language to be installed.
Choose the language used with
ImageMixer 3, and then click “Next”.
Click
6
Choosing the installation destination:
If you do not wish to change the folder in
which the software is installed, click “Next”.
If you wish to change the folder, click
“Change”, designate the installation location,
and then click “Next”.
Click
4
The “ImageMixer 3” installation screen will
appear: Click “Next”.
Click
Click
120
7
Choosing video system:
The screen for setting the video system will
appear, and then click “Next”.
9
After installation is finished, the screen for
prompting restart will appear: Click “Finish”
to restart the PC.
After restart, remove the CD-ROM from the
PC.
Installing the software is now complete.
Click
8
Executing installation:
The setups for installation are now complete.
Click “Install” to execute installation.
Click
Note:
• After installation is finished, the installation of
Direct X may start depending on the PC used: In
®
this case, follow the instructions on screen to install
®
Direct X
.
Click
Important information for customers who use
Easy CD Creator 5 made by Roxio
Corporation:
If ImageMixer 3 provided with this DVD
video camera/recorder is installed, Easy CD
Creator 5 may not operate normally. The
screen shown below will appear after you
click “Install”:
If you are using Easy CD Creator 5, click
“Yes”, and do not install ImageMixer 3.
When using ImageMixer 3, uninstall Easy CD
Creator 5, and then install ImageMixer 3.
121
[When using Macintosh]
1
Turn the Macintosh on, and insert the
provided CD-ROM into the CD-ROM drive of
Macintosh.
5
6
Choose the installation destination and type
of installation, and click “Continue”. Then
click “Install”.
Follow the instructions on screen for
operation: Installation will start.
2
3
Double-click the DVDHS7S icon displayed on
desktop.
After installation is finished, the screen for
exit will appear: Click “Close”.
The screen for installation will close and
installation will be complete: Remove the
CD-ROM.
Double-click the icon of “ImageMixer 3 for
DVDCAM.pkg” displayed on screen.
The installer will start: Click “Continue”.
The “Read Me” screen will appear: Click
“Continue”.
Note:
4
Checking licence agreement:
• You must have the administrator authority of the PC
before installing software.
The licence agreement screen will appear.
Set the language to be used when installing
the software, and then carefully read the
licence agreement: If you agree with the
contents, choose “Continue”. If you accept
the licence agreement, click “I agree”.
* With the provided software for Macintosh, the
language used with OS will automatically be
installed.
Setting language
when installing
Click
122
Connecting to PC via PC Connection Cable
Use the provided PC connection cable to connect the DVD video camera/recorder to PC as shown
below.
To USB connection
terminal
To PC connection
terminal
PC connection cable (provided)
Note:
• The PC connection cable does not supply power to the DVD video camera/recorder: Use the AC adapter/charger
to power the DVD video camera/recorder.
• Before connecting the DVD video camera/recorder to PC, disconnect any cables other than the PC connection
cable and AC adapter/charger.
• When connecting the DVD video camera/recorder to PC, the ACCESS/PC indicator will light green. While HDD or
a disc is being accessed, the indicator will light or blink orange. While an SD memory card is being accessed, the
CARD ACCESS indicator will light or blink red.
• When this DVD video camera/recorder is connected to PC, nothing will appear on the LCD monitor or in the
viewfinder.
• When using Windows, the DVD video camera/recorder can be connected to a USB1.1 port of PC. However, since
the data transfer speed is lower than when connecting to a USB2.0 port, lost frames may occur or the process
may take more time.
• Read “Cautions when connecting DVD video camera/recorder to PC” on page 136.
The power switch of this DVD video camera/recorder has three modes: HDD mode when it is set to
“HDD”, Disc mode when it is set to “DVD”, and Card mode when it is set to “SD”.
* The mode cannot be switched while the DVD video camera/recorder is connected to PC. To
switch, unplug the PC connection cable from the PC (see page 126), and then change over the
power switch.
If you connect the DVD video camera/recorder to PC via PC connection cable, the PC will
automatically recognise the DVD video camera/recorder. After recognition is finished, it may be
prompted to restart the PC: In this case, follow the instruction and restart the PC.
123
When connecting the DVD video camera/recorder to PC, the DVD video camera/recorder will be
recognised as a drive. The drive will appear on screen as follows:
[When using Windows]
If the DVD video camera/recorder is connected to PC with its power switch set to “HDD” or
“DVD”, it will be recognised as an optical disc drive, and a disc set in the DVD video camera/
recorder can be accessed. (The shape of icon and drive name, such as G:, will depend on the software
environment used.)
If the DVD video camera/recorder is connected to PC with its power switch set to “SD”, it will be
recognised as a removal disk, and a card set in the DVD video camera/recorder can be accessed.
(The drive name, such as G:, will depend on the software environment used.)
[When using Macintosh]
If the DVD video camera/recorder is connected to Macintosh USB
port with the power switch set to “HDD” or “DVD”, it will be
recognised as a removable drive, and the icon shown on the right
will appear. (The shape of icon and drive name will depend on the
software environment used.)
If the DVD video camera/recorder is connected to Macintosh USB port with the
power switch set to “SD”, it will be recognised as a removable drive, and the
icon shown on the right will appear.
Double-click this icon: The contents of card can be checked.
(The shape of icon and drive name will depend on the software environment used.)
●Handling photos
Photos are recorded on a SD memory card in this DVD video camera/recorder in JPEG format: Use
the application that conforms to the JPEG images.
The following shows how to import photos into PC/Macintosh:
Insert an SD memory card with photos recorded into the DVD video camera/recorder, and connect it
to PC/Macintosh. Double-click the removable disc icon displayed on the screen: The contents on the
card will appear.
The photos recorded on the DVD video camera/recorder are stored in “DCIM” - “100*HPNX1”
folder on card: Drag and drop them to PC to import them.
* The number may be different if the card was recorded on another DCF conforming device.
The following operations are not possible on the DVD video camera/
recorder while it is being connected to PC:
• Camera operation using operation buttons on DVD video camera/recorder.
• Ejection of disc using DISC EJECT button on DVD video camera/recorder.
• Power off using power switch.
• Do not use Explorer to operate any video files recorded on disc: Use the provided software.
• HDD, disc and card cannot simultaneously be accessed.
A disc/card loaded in the DVD video camera/recorder can be ejected by operating
the PC.
• The disc and SD memory card can be replaced even though the DVD video camera/recorder is
turned off or it is not connected.
124
●When removing disc
[When using Windows]
Use Windows Explorer or My Computer to choose the drive icon of DVD video camera/recorder.
→ Right-click the mouse.
→ Choose “Eject”.
→ The cover of DVD insertion block on DVD video camera/recorder will open.
Insert another disc and close the cover: The disc will be recognised.
[When using Macintosh]
Place the drive icon of this DVD video camera/recorder (displayed on desktop) in Trash Box: The
cover of DVD insertion block on DVD video camera/recorder will open. Load another disc and
close the cover: The disc will be recognised.
●When removing SD memory card
[When using Windows]
Make sure that the SD memory card is not being accessed by the PC software on PC, and that the
CARD ACCESS indicator on DVD video camera/recorder (see page 7) is not lit or blinking, and then
remove the SD memory card from DVD video camera/recorder.
The CARD ACCESS indicator may be lit or blinking for a while after a file in PC is written to the SD
memory card: Wait until the CARD ACCESS indicator goes out. It will sometimes take no less than a
few minutes.
[When using Macintosh]
Drag the removal drive icon (displayed on desktop) and place it in Trash Box. After making sure that
the icon disappears from desktop, remove the SD memory card from the card insertion slot of this
DVD video camera/recorder.
USING DISC IN DVD DRIVE BUILT INTO PC
If you have a PC with the drive conforming to the disc used, and the application software, you can
directly insert the disc into the drive to use it.
Whether a disc conforms to the DVD drive will depend on the DVD drive: Use a DVD drive that
conforms to each disc.
Finalised DVD-RW/DVD-R/+RW can be used with DVD-ROM drive (reading only).
The slot-in type drive of Macintosh is not compatible with an 8 cm disc: Be sure not to use the
drive, since a disc inserted by mistake cannot be removed.
Note:
•
When writing images edited on PC to a brand-new DVD-RW, do not format the disc on DVD video camera/recorder.
• Some vertically installed and slot-in type drives on PC cannot accept an 8 cm disc.
• An adapter that converts 8 cm CD to 12 cm diameter (for 8 cm CD) cannot be used for any 8 cm DVD-RAM/8 cm
DVD-RW/8 cm DVD-R/8 cm +RW.
• If you use, on PC, a DVD-RW/DVD-R/+RW recorded on the DVD video camera/recorder, finalise it on the DVD
video camera/recorder (see page 107).
• Some DVD-ROM drives cannot read a DVD-RW/DVD-R/+RW recorded on the DVD video camera/recorder.
125
BEFORE TERMINATING PC CONNECTION (UNPLUGGING PC
CONNECTION CABLE)/CHANGING OVER POWER SWITCH
[When using Windows]
2
Choose “USB mass storage device”. The drive
name (E:, etc.) will depend on the PC used.
1
Before unplugging the PC connection cable
from PC, terminate the application and then
click the “Hardware Removal” icon on task
tray at the bottom right of Windows screen.
3
A message showing that “hardware removal”
is possible will appear.
Unplug the PC connection cable.
* If “hardware removal” results in error, terminate
®
Windows once, and then unplug the PC
®
connection cable. When using Windows 2000
®
Professional, installing Windows 2000 SP3 or
later may resolve the problem. Ask your PC
manufacturer or Microsoft Corporation how to
®
get Windows 2000 SP3.
Click
[When using Macintosh]
When removing the DVD video camera/recorder from PC, choose the drive icon of DVD video
camera/recorder (HDD, disc or card), and choose “Eject” in the “File” menu.
126
Using ImageMixer 3 for Windows
ImageMixer 3 allows you to capture the images recorded on the DVD video camera/recorder into
PC, edit the video file, and create a DVD-Video or DVD-VR using the video file.
The following shows the basic operation of ImageMixer 3.
Refer to the electronic instruction manual that can be read on PC for detailed instructions about
ImageMixer 3: While ImageMixer 3 is being activated, click “Help” - “ImageMixer3 Help (H)F1” to
display this manual. See the electronic instruction manual for explanation on how to edit video files.
To start ImageMixer 3, double-click the ImageMixer 3 shortcut that was created when it was
installed.
* If there is no ImageMixer 3 shortcut on desktop, choose [Start] - [Programmes] or [All
programmes] - [PIXELA] - [ImageMixer 3] - [ImageMixer 3].
Note:
• With scenes recorded on a DVD-RW (VF-mode)/DVD-R/+RW, no recording date/time will appear on ImageMixer 3.
VIEWING IMAGES RECORDED ON HDD/DISC USING PC
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this
DVD video camera/recorder (see page 107).
1
Connect this DVD video camera/recorder to
the USB port of PC.
To view images recorded on a disc, first insert
the disc you wish to play back into the DVD
video camera/recorder, and then connect the
DVD video camera/recorder to the USB port
of PC.
Double-click the thumbnail of scene you wish
to play back: Playback of the scene will start
on another screen.
Double-click the screen being played back:
Playback will appear on a full screen. To exit
the full-screen display, double-click the screen
again.
2
Start ImageMixer 3.
When ImageMixer 3 starts up, the launcher
shown below will appear: Click “Playback/
Import Movie”.
To play back images on another disc, click the
“Eject” button at the bottom left of library
screen, with playback stopped. The cover of
DVD insertion block on this DVD video
camera/recorder will open: Remove the disc
and load another disc to be played back.
Click
Eject button
3
Choose the camcorder on the library screen.
The library screen shown below will appear.
Click the camcorder icon shown on the left of
screen: The images recorded on HDD (DVD
when DVD is being chosen) will appear.
Scene Select
Click
Note:
• When connecting the DVD video camera/recorder to a
USB1.1 port of PC, the data transfer speed will be
insufficient, which could result in lost frames.
127
CREATING DVD-VIDEO USING IMAGES RECORDED ON HDD/DISC
You can use the images recorded on the DVD video camera/recorder to create a disc that can be
viewed on DVD recorders/players.
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this
DVD video camera/recorder (see page 107).
If the file system of HDD in your PC is FAT32, no video file larger than 4 GB can be imported, due to
restrictions of file system.
When using a large video file, handle it on an NTFS format HDD.
1
Connect this DVD video camera/recorder to
the USB port of PC.
To save images recorded on a disc, first insert
the disc you wish to save into the DVD video
camera/recorder, and then connect the DVD
video camera/recorder to the USB port of PC.
4
Setting up project.
Set up a project. You can set up the
designated save location of edited contents
and image quality.
Be sure to choose “PAL” for the video system.
This DVD video camera/recorder uses Dolby
Digital for the audio recording format:
Choose “Dolby Digital” for audio setting.
After setting up the project, click the “OK”
button.
2
Start ImageMixer 3.
When ImageMixer 3 starts up, the launcher
shown below will appear: Click “Create
DVD-Video”.
Click
Click
3
Click “Create New DVD”.
128
5
On the “Importing Device” screen, choose
“Hitachi DVDCAM (HDD)” when the power
switch is set to “HDD”; and “Hitachi
DVDCAM” when the power switch is set to
“DVD”.
the same procedure to import the images.
When the images on DVD-RW (VF-mode)/
DVD-R/+RW are imported, the recording
date/time will not appear.
If you wish to change the import device, and
continue import, unplug the PC connection
cable from the PC, and then change over the
power switch (see page 123).
Note:
• To import all chapters in the title at once, click “Select
all” in the editing menu at the top of screen, and then
click “Import”.
• To import multiple chapters, click the desired chapters
while holding down the Ctrl key.
Click
7
Click “Authoring” and create a DVD-Video
menu.
6
Select the images from which you wish to
create a DVD-Video, and then click “Import”.
The image recorded on HDD, disc will
appear. Select the chapter to be imported into
PC, and then click “Import”: Importing into
PC will start.
Clicking “Authoring” will display the editing
screen of DVD-Video menu. The video file
previously imported into PC will appear in
“Source”. Choose the desired video file, and
click “Add titles”: The video file will be
registered.
When using a video file imported into PC
using ImageMixer 3, click “File” to choose the
folder in which the video file will be stored.
Eject button
Click
If you wish to import images on another disc
after importing images on one disc, click the
“Eject” button. The DVD insertion block of
DVD video camera/recorder will open:
Remove the disc, insert the other disc whose
recorded images you wish to import into the
DVD video camera/recorder, and then close
the DVD insertion block. After a short while,
the images on the disc will appear: Perform
Click
Clicking “Theme” or “Set title menu” will
allow you to change the design of DVD-Video
menu.
Choose the type of disc to be created (8 cm/
12 cm/2-layer) using [Set] - [Configuration].
129
• If a video recorded on the HDD in this DVD video
camera/recorder for extended hours is too long for
one disc, cut-edit the video so that it can be recorded
on one disc. See the on-line instruction manual of
ImageMixer 3 for cut-editing of videos. To display the
ImageMixer 3 manual, choose “Help”, and then
“ImageMixer 3 Help (H) F1”, while ImageMixer 3 is
being executed.
8
Click “Write” to create a DVD-Video.
Clicking “Write” will display the screen for
writing.
Check “Create disc”, perform setting for
write, such as choosing DVD write drive, and
then set a blank DVD-RW/DVD-R into the
drive.
Clicking “Preview” will allow you to check
any image of DVD to be created.
Click
Click
Click
Click the “Write” button: The screen for
setting write will appear. After checking the
settings, click “OK”: Writing will start.
When write is complete, the drive will open
to eject the DVD: Creation of an original DVD
is now finished.
Note:
• If you load a written DVD-RW in the write drive, the
dialogue “Are you sure you want to delete the content
of disc?” will appear.
Deleting the content of disc will erase all data on the
disc: Carefully check the contents of disc.
Choosing “Yes” will display the screen for choosing
the disc erasure method: After checking it, click the
“OK” button. Once the contents on disc have been
deleted, the cover of DVD insertion block on DVD
video camera/recorder will open. Close the cover
following the message instruction.
• If the disc contains a video file that does not conform
to DVD-Video format, the video will be re-encoded,
resulting in deterioration of image quality.
• If you execute “File” - “Save project”, the halfway
operation status can be saved as a project file.
Reading in this saved project file will allow you to
restart the operation from the saved status.
•
A project file will be saved in the project folder that
was designated when images were saved, and the file
name will be automatically attached.
130
Using ImageMixer 3 Mac Edition for DVDCAM
ImageMixer 3 Mac Edition for DVDCAM allows you to import the images recorded on this DVD
video camera/recorder into Macintosh as a video file, play back the video file, edit it and create a
DVD-Video.
The following shows the basic operations of ImageMixer 3 Mac Edition for DVDCAM.
Refer to the electronic instruction manual that can be read on Macintosh for detailed instructions of
ImageMixer 3 Mac Edition for DVDCAM: Click “Help” - “ImageMixer 3 Help” while it is starting
up.
To start ImageMixer 3 Mac Edition for DVDCAM, double-click the “ImageMixer 3 for DVDCAM”
icon in Macintosh HD (startup disk) - “Applications” - “ImageMixer 3 for DVDCAM”.
Note:
• The provided software cannot be used to burn a DVD-VR (DVD-RAM/DVD-RW).
• With scenes recorded on a DVD-RW (VF-mode)/DVD-R/+RW, no recording date/time will appear on ImageMixer 3 Mac
Edition for DVDCAM.
VIEWING IMAGES RECORDED ON HDD/DISC USING MACINTOSH
A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised (using
this DVD video camera/recorder, see page 107) before it is played back on Macintosh.
1
Connect this DVD video camera/recorder to
the USB port of Macintosh.
To save images recorded on a disc, first insert
the disc you wish to save into the DVD video
camera/recorder, and then connect the DVD
video camera/recorder to the USB port of
Macintosh.
2
3
Start ImageMixer 3 for DVDCAM.
Choose Hitachi DVDCAM.
Click “Hitachi DVDCAM” displayed on the
left of screen: The images recorded on HDD
(DVD when DVD is being chosen) will
appear.
4
Select the scene you wish to play back and
click “Playback”.
If you click the scene to be played back, and
then click “Playback” at the bottom of screen,
the scene will be played back on another
screen.
Click
Note:
Click
Scene Select
• If Macintosh has previously been set, the DVD player
will start automatically if you load a DVD in the DVD
video camera/recorder or Macintosh drive. To cancel
automatic start of DVD player, from the “Apple” menu
choose “System Preferences”, “CDs&DVDs”, “When
you insert a video DVD”, and then “Ignore”.
• When connecting the DVD video camera/recorder to
Macintosh for playback on a DVD player, etc., the
screen for setting the drive region code will appear:
Set the region code that matches your local area.
• Normal playback may not be possible depending on
the disc recorded status.
131
IMPORTING IMAGES RECORDED ON HDD/DISC INTO MACINTOSH
ImageMixer 3 allows you to import movie files recorded on HDD/disc into Macintosh as MPEG
files. Using ImageMixer 3, you can play back the imported video file, combine images, cut-edit them;
and also create a DVD-Video.
1
Connect this DVD video camera/recorder to
the USB port of Macintosh.
To import images on DVD, load the DVD into
the DVD video camera/recorder, and connect
it to the USB port of Macintosh.
Click “Library” at the top left of screen: The
video files imported into Macintosh using
ImageMixer 3 will appear in a list as shown
below.
2
3
Start ImageMixer 3 for DVDCAM.
Choose Hitachi DVDCAM.
Click “Hitachi DVDCAM” displayed on the
left of screen: The images recorded on HDD
(DVD when DVD is being chosen) will
appear.
4
Select the scene you wish to import and click
“Import”.
Click the scene to be played back, and then
click “Import” at the bottom of screen:
Importing the scene will start.
Click
Select a video file on this library screen and
click the Playback button at the bottom of
screen: The video file can be played back.
Also, clicking the “Movie Edit” icon will
allow you to cut-edit the video.
Refer to the electronic instruction manual of
ImageMixer 3 for details on how to use it (see
page 131).
Note:
If you click “Recently Imported Files” in “Smart Album”
on the left of screen, only the files recently imported will
automatically appear.
Select
Click
Click
If you designate a specific condition, such as recording
date, Smart Album will also automatically display the
video files collectively. For detailed use of Smart Album,
refer to “How to Use” - “Creating Albums” - “Creating
Smart Albums”.
132
CREATING DVD-VIDEO USING IMAGES RECORDED ON HDD/DISC
You can use the images recorded on the DVD video camera/recorder to create a disc that can be
played on other DVD recorders/players.
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this
DVD video camera/recorder (see page 107) before importing the images on it.
1
2
Start ImageMixer 3 for DVDCAM.
4
Create a DVD creation list.
Clicking Library will display a list of video
files imported into Macintosh using
ImageMixer 3.
Select the video files from which you wish to
create a DVD-Video, and then click “DVD
List” at the bottom of screen. The screen for
selecting the DVD menu design, size of DVD
disc to be created (8 cm/12 cm), and picture
quality will appear: Choose the desired
settings, and click “OK”.
The created DVD list will be added.
The DVD list has been registered “Untitled”:
Double-click “Untitled” to change the name
of the DVD list. The name of the DVD list will
become the name of the disc.
Choose Hitachi DVDCAM.
Click “Hitachi DVDCAM” displayed on the
left of screen: The images recorded on HDD
or disc will appear.
3
Select the scene you wish to import and click
“Import”.
Click the scene to be played back, and then
click “Import” at the bottom of screen:
Importing the scene will start.
After importing, click “Library” to make sure
that the desired video file has been imported.
Click
Click
Note:
Select
“DVD List”
• You can also use Album or Smart Album to easily
prepare a DVD creation list, by selecting the video
files from which you wish to create a DVD-Video and
clicking “DVD List” at the bottom of screen.
• Even after creating a DVD list, you can drag a video
file from the library and drop it to the DVD list on the
left of screen: That video file will be added.
• While a DVD list is being displayed, click the Utility
Menu button at the bottom of screen and choose “Edit
DVD List”: You can re-set the DVD menu design, size
of DVD disc and picture quality.
133
5
Write to a DVD.
Note:
• If you load a written DVD-RW in the write drive, a
dialogue “Are you sure you want to delete the
contents of disc?” will appear.
You can check the video files in a DVD list.
Select the video file you wish to check and
click the Playback icon at the bottom of
screen.
When checking the video files in list, click
“Write” at the bottom of screen:
Deleting the content of disc will erase all data on the
disc: Carefully check the content of disc.
• If the disc contains a video file that does not conform
to DVD-Video format, the video will be re-encoded,
resulting in deterioration of image quality.
Click
The screen for setting the write drive will
appear. Choose the drive that you use to
write to a DVD, and then click “Create”:
Writing to DVD will start.
Click
If you wish to create multiple DVDs of the
same contents, choose “Yes” for the message
“Do you want to create another disc?” that
will be displayed after a DVD is created.
134
Uninstalling Software
[When using Windows]
Use “Control Panel” to open “Add or Remove Applications”, choose the application to be
uninstalled from the displayed list of applications, and then click the “Change/Remove” button.
Note:
• After uninstalling software, be sure to restart the PC.
• Administrator authority is required for uninstallation.
[When using Macintosh]
Manually move the following folders/files installed to Recycle Bin:
/Application/ImageMixer 3 for DVDCAM
/User/Movies/ImageMixer 3 for DVDCAM
/User/Library/Application Support/ImageMixer 3 for DVDCAM
/User/Library/Preferences/com.PIXELA.ImageMixer 3.DVDCAM.plist
/Library/Receipts/ImageMixer 3 for DVDCAM.pkg
Note:
• “User” will depend on the login user name.
• Administrator authority is required for uninstallation.
Contact The Following
●Inquiries on software provided with this DVD video camera/recorder
should be directed to:
PIXELA PC Software Support Centre
+63-2-438-0090
URL: http://www.pixela.co.jp/oem/hitachi/e/index.html
●For inquiries on connections between PC and this DVD video camera/
recorder:
DVDCAM PC Software Support Centre
URL: http://dvdcam-pc.support.hitachi.ca/
135
Cautions when connecting DVD video camera/
recorder to PC
Use the AC adapter/charger to power the DVD video camera/recorder when connecting it to
PC:
The DVD video camera/recorder can also use a battery, but if the DVD video camera/recorder
cuts off during data transfer, important recordings will be lost: If data is being written to disc, the
disc will then be unusable.
Do not unplug cables while the HDD/disc in DVD video camera/recorder is being accessed
from PC:
If the PC connection cable (provided) or mains lead is unplugged while the ACCESS/PC or CARD
ACCESS indicator is blinking, important recordings will be lost: If data is being written to disc, the
disc will then be unusable.
Before connecting the DVD video camera/recorder to PC, disconnect any cables other than
the PC connection cable and AC adapter/charger.
Take care that the temperature of this DVD video camera/recorder is not too high when it is
connected to PC: Use a reference of 30 minutes at approx. 30ºC or less for operation.
If the temperature of the DVD video camera/recorder is too high, writing or reading on the DVD
video camera/recorder may be faulty. And note that, if an error occurs during writing to a DVD-R,
the disc will no longer be usable.
It will take some time to import a long-duration scene recorded on HDD into PC: During this time,
make sure that the temperature of this DVD video camera/recorder does not get too high.
Contents edited on the DVD video camera/recorder will not be reflected in the provided
software.
If the DVD video camera/recorder is connected via USB hub or to a USB port on PC front
panel or keyboard, the DVD video camera/recorder may not be recognised by PC: If this
happens, connect the DVD video camera/recorder to a USB port on PC rear panel.
If the DVD video camera/recorder power is off, it cannot be connected to PC.
Do not use PC application to finalise a DVD-RW/DVD-R recorded on this DVD video camera/
recorder: Doing so will make the disc unusable.
Data may be readable or writable from/to the DVD video camera/recorder using software other
than that provided with the DVD video camera/recorder, but Hitachi does not guarantee the
operation.
If the PC is started from suspend (or sleep or standby) with the DVD video camera/recorder
connected to the PC, the DVD video camera/recorder may not be recognised: Disconnect the
DVD video camera/recorder from PC once, and restart the PC.
Multiple DVD video camera/recorders cannot be simultaneously connected to PC.
DVD discs created on the software provided with this DVD video camera/recorder can be
played on DVD recorders/players, etc. that conform to each individual disc, but playback on
all devices is not guaranteed. They may not be playable, depending on the playback device
and/or disc recorded status.
136
Subsidiary Information
Introduction to Optional Accessories
CAMERA ACCESSORIES
Wide conversion lens (DZ-WL1)* (p. 51)
Tele-conversion lens (DZ-TL1)* (p. 51)
Step-up ring (DZ-SR3437) (p. 51)
•
When using camera accessories, be sure to read the instruction manuals for each accessory.
You will need the optional step-up ring when attaching these lenses.
*
POWER SUPPLY
Battery (DZ-BP7SW)
Battery (DZ-BP14SW)
•
•
Refer to the catalogue for details.
The models and specifications of the optional accessories shown on this page are subject to change, and their
production may be discontinued.
137
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message
appears, refer to the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Reference
page
Message
Cause & Troubleshooting
(1) Data error in a part It is possible that the system cannot normally complete writing of
of image file. Repair
data now?
file when power is turned off for some reason during recording or
editing (deleting, dividing or combining scenes, or creating play
(2) Found error in image list). Selecting “YES” will automatically repair the video file, but
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
even if “NO” is selected, the same message will appear when the
DVD video camera/recorder is turned on next time. (Do not
remove the disc while the DVD video camera/recorder is
recognising it: Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Be sure to use the AC adapter/charger to power the DVD video
camera/recorder when repairing data: Repair is not possible
using a battery. If a battery has been attached, turn the power
switch off once, connect the AC adapter/charger, and then start
repairing.
• If message (1) appears when using the HDD, a battery can be
used for repair (if the remaining battery level indicator shows
more than half level).
—
• Repair will normally be complete in several minutes, but it may
take longer (up to one hour).
• Data may not be repaired, depending on the timing when
power was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data
(only the corrected portion for partial repair), the original date/
time information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost in case of message (2) (3) only.
• See *1 on page 144.
(1) DVD is not
formatted. Format the
DVD now?
A DVD-RW/+RW that was initialised by PC and not initialised for
camera use is inserted.
(2) DVD Format. Select
record format.
38
(Displayed only when
DVD-RW is used.)
All scenes are already
dubbed. Please use
other Dub Mode.
This message will appear if you attempt to execute “New”
dubbing with no un-dubbed scenes on HDD. Turn off the dubbed
marks on scene(s) you want to dub, or choose another dubbing
method.
80, 83
114
Auto finalizing...
Plaese wait...
This message will appear with a +RW when it is removed after
recording, or the last recorded scene was deleted. The auto-
finalised +RW can be played back on a DVD recorder/player.
138
Reference
page
Message
Cause & Troubleshooting
Cannot combine scene. Unless consecutive scenes are selected, they cannot be
combined.
86
Cannot combine scene Scenes in different programmes (different recording dates)
of multiple programs.
Create PlayList first,
and then combine
scenes.
cannot be combined. Create a Playlist first, and then combine
such scenes on the playlist.
86, 97
Cannot combine.
Deselect PHOTO
scenes.
Select only movies and combine them.
86
86
Cannot combine. Select Select a range of at least 2 scenes to be combined, and then
multiple scenes. combine them.
Cannot delete scenes. This may occur when scene that was edited for division, etc. is to
be deleted.
84, 86
85
Combine the divided scenes, and then delete them.
Cannot divide scene.
This message will appear when the scene is extremely short
because division, etc. was repeated.
Cannot execute.
Change display
category to ALL.
This message will appear if you attempt to combine or move
scenes with “Category: VIDEO or PHOTO” specified.
109
Cannot execute.
Unselect multiple
scenes.
Division or change in thumbnail was executed when multiple
scenes were selected.
74
Cannot finalize DVD in This message will appear if you press the FINALIZE button when
HDD mode. Please
finalize DVD in DVD
mode.
the power switch is set to “HDD”. Set the power switch to “DVD”,
and then finalise the disc.
30, 107
Cannot read DVD.
Check dirt/crack/both-
Error occurred while the disc was being recognised. Make sure
that there is no scratch or dirt on disc, that the surface/back of
10, 37
sides contrary/inserted disc is not reversed, and that the disc is firmly pushed against the
correctly.
turntable. See *3 and *4 on page 144.
CANNOT RECORD
PHOTOS
• This message will appear when the PHOTO/SELECT button is
pressed with the power switch set to “HDD” or “DVD”.
• No photo can be recorded on the HDD or disc in this DVD
video camera/recorder: Use a card to record photos.
30, 156
CANNOT RECORD
VIDEO
This message will appear when the REC button is pressed with
the power switch set to “SD”.
30
89
92
Cannot replace
thumbnail on PHOTO
scenes.
The thumbnail of a still cannot be changed.
Select a movie.
Cannot select any more The maximum number of selectable scenes is 999.
scenes.
CANNOT SLEEP
MODE
The DVD video camera/recorder can enter the sleep/restart
status only from the recording pause status. The following
conditions apply:
• No DVD is loaded in this DVD video camera/recorder but the
power switch is set to “DVD”.
42
• No card is loaded in this DVD video camera/recorder but the
power switch is set to “SD”.
• The HDD, disc or card has no remaining space.
• The HDD/disc is protected.
139
Reference
page
Message
Cause & Troubleshooting
CARD ALMOST FULL Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
84, 105, 156
Card error has
occurred.
• The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
24
• Data other than still image may be included: Use another card.
Card error has
occurred.
Format the card now?
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose “YES” and format it.
104
24
Card error has
occurred.
Formatting is not
complete.
The card may be damaged: Use another card.
Card error has
occurred. Keep card
inside & restart.
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again.
25, 30
Card full.
Delete unnecessary stills and try the card, or use another card.
84, 156
104
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
CHECK CARD
The inserted card cannot be used in this DVD video camera/
recorder: Use another card.
24
CHECK DVD
A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
24, 105
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
CHECK HDD
The HDD may have been destroyed. Also check to see whether
the HDD is write-protected.
105
106
—
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
• Use another disc.
• See *3 and *4 on page 144.
COPY PROTECTED
The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
116
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
Dubbing is not
complete.
This message will appear when dubbing has failed.
79
DVD error has occurred. • Disc error occurred during finalising, and finalising failed.
Finalizing is not
Replace the disc.
107
complete.
• See *3 on page 144.
DVD error has occurred. • Has the disc been initialised on PC? Has initialising the disc on
Format the DVD now?
PC been interrupted?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialising the disc will erase all data on it.
• See *2 on page 144.
104
140
Reference
page
Message
Cause & Troubleshooting
DVD error has occurred. The disc may be dirty.
Formatting is not
complete.
Remove the disc and wipe off fingerprints, dust, etc. before
reusing it, or use another disc.
10, 104
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
DVD error has occurred. Disc error could have occurred during editing of scenes.
Keep DVD inside &
restart.
Turn off the DVD video camera/recorder with the disc being used
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
25
30
DVD error has occurred. This message will appear if disc error has occurred during
dubbing. Connect the AC adapter/charger to DVD video camera/
recorder, and set the power switch to “DVD”: Video file will be
repaired.
Please keep DVD inside
and set power switch to
“DVD”.
DVD error has occurred. This message will appear when disc error occurred during
Unfinalizing is not
complete.
unfinalisation, and unfinalising disc failed. Replace the disc.
108
DVD error has occurred. • Use another disc.
• See *3 and *4 on page 144.
10, 23
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
104
Initialise the disc or use another disc.
• Initialising the disc will erase all data on it.
DVD full. Cannot
execute.
This message will appear if the capacity of the scene selected is
larger than the free space on disc. Select another scene, or use
another DVD.
79
DVD must be finalized
before it can be played
back on DVD player or
DVD recorder.
• This message will appear if you remove a DVD-RW (VF-mode)/
DVD-R that has not been finalised from the DVD video camera/
recorder.
114
• See *5 on page 144.
Drive overheat. Please The temperature inside the DVD video camera/recorder is too
retry later.
high, and writing to disc or reading from disc may not be
performed normally.
30
79
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
DVD-R* cannot dub the With a DVD-RW (VF-mode)/DVD-R/+RW, no video can be
scene recorded in STD recorded with a combination of movie quality “STD” and 16:9
mode and 16:9.
mode “On”. Replace the disc with a DVD-RAM or DVD-RW (VR-
mode) for dubbing.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
“+RW” will appear when using a +RW.
DVD-R*, Different video With a DVD-RW (VF-mode)/DVD-R, the movie quality mode and
mode, 16:9 and 4:3
mode cannot exist
together.
16:9 mode cannot be changed in the middle of disc: Change the
movie to be dubbed or replace the disc with a DVD-RAM or DVD-
RW (VR-mode).
79
62
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, 16:9 mode
cannot be changed,
when Video mode is
STD.
With DVD-RW (VF-mode)/DVD-R/+RW, the setting of 16:9 mode
will not be possible when the Video mode is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
“+RW” will appear when using a +RW.
141
Reference
page
Message
Cause & Troubleshooting
DVD-R*, Input Source
cannot be changed.
Once a DVD-RW (VF-mode)/DVD-R has been recorded in the
16:9 mode, the input source will not be changeable.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
62
62
DVD-R*, Video mode
and 16:9 mode cannot 16:9 mode once used for recording cannot be changed.
With DVD-RW (VF-mode)/DVD-R, the movie quality mode and
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
be changed.
DVD-RAM, Finalize is
not required.
This message will appear if you press the FINALIZE button with a
DVD-RAM loaded in this DVD video camera/recorder. No
finalisation is necessary for a DVD-RAM.
107
84, 156
104
END OF CARD
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Error occurred. Please An error occurred with the HDD for which repair is being tried.
format HDD.
Initialise the HDD: But note that initialising the HDD will delete all
data stored on the HDD.
Error occurred. Please • Abnormality has occurred with the DVD-RAM/DVD-RW/+RW
replace DVD or format
DVD.
to be repaired. Initialise the disc before using it, or use the
another disc. Initialising the disc will erase all data on it.
• See *2 on page 144.
104
—
Error occurred. Please An abnormality occurred with a DVD-R to be repaired. Replace
replace DVD.
the disc.
Finalize may not be
This message will appear when power is supplied again and the
complete. Finalize again disc is reinserted after power was shut off during finalisation due
107
now?
to a power failure, etc. Choose “YES” if you wish to be sure
finalising is performed.
HDD/DVD ALMOST
FULL
The remaining free space of HDD/disc is less than one minute for
video: Delete unwanted scenes, or use another disc.
84, 155
84
HDD full.
Cannot execute.
Delete unwanted scenes.
HDD/DVD has no data. This message will appear when an attempt is made to execute
dubbing, playback or editing on Disc Navigation when no scene
has been recorded.
—
98
—
HDD/DVD has no
PlayList.
Switching of play list was selected with no play list stored.
HDD/DVD includes
protected scenes.
Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
HDD/DVD is full.
The number of entered scenes has reached the limit that can be
Cannot add control info. entered, so the control information for generating thumbnails
cannot be added.
84, 86
Combine several scenes or delete them.
HDD error has
occurred.
Initialise the HDD before using the DVD video camera/recorder.
Initialising the HDD will delete all data recorded on it.
104
104
HDD error has
occurred.Format the
HDD now?
Did you interrupt formatting the HDD?
Choose “YES”, and then format the HDD.
Initialising the HDD will delete all data recorded on it.
HDD error has
Did you interrupt formatting the HDD?
occurred.Formatting is Press the RESET button to execute system reset.
not complete.
152
142
Reference
page
Message
HDD error has
Cause & Troubleshooting
HDD error probably occurred during editing of video file.
Turn off this DVD video camera/recorder, and then connect the
AC adapter/charger to the DVD video camera/recorder to power it
again: The video file will be repaired.
occurred.Restart.
25
NO DVD
This message may appear when the DVD video camera/recorder
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or HDD/
DVD drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.
6
The disc has not been inserted.
Insert it.
37
37
The disc is not inserted correctly.
Push the disc against the turntable at the centre until a click is heard.
See *3 and *4 on page 144.
Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.
37, 38
No more scenes.
• All scenes are deleted from the play list.
PlayList was deleted.
• Since a play list with no scenes cannot be supported by
specifications, a play list from which all registered scenes have
been deselected will be deleted.
100, 101
97
PlayList over limit.
An attempt was made to create new play list or copy play list,
even though limit specified for play lists in the video recording
standard had already been stored.
Same scenes on Play
List will be deleted.
Delete scenes?
• This will appear when scenes are to be deleted.
• When a play list exists on HDD or disc, an attempt to delete
scenes in programme will display this message. (This message
will not appear if you deselect scenes from play list.)
84
Scene No.xxx is too
This message will appear during all scene dubbing if the data
large. Please divide this size of the scene to be dubbed is larger than the free space on
scene before dubbing. one disc (approx. 1.4 GB, approx. 30 minutes in FINE mode).
Divide the scene, and then dub it.
79
Scenes over limit.
Cannot add scenes.
The number of scenes entered in play list has reached the limit
that can be entered.
97, 101
Delete several scenes.
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be entered.
Delete several scenes.
97, 101
—
Stop processing.
The ꢀ button was pressed to stop processing of multiple scenes.
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
There was no scene
which can be deleted.
84, 91
86
The scene from which
Video mode/Wide mode Modes/16:9 modes cannot be combined.
differs cannot combine.
If the power switch is set to “HDD”, scenes with different VIDEO
The temperature of
HDD is outside the
operating temperature
range. Please retry
later.
The temperature inside the DVD video camera/recorder is too
high, and reading from HDD may not be performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
4, 154
4, 154
The temperature of
HDD is outside the
operating temperature
range. Turn off power.
This message will appear if the temperature of the HDD in this
DVD video camera/recorder is outside the operating temperature
range. Recording on a disc may be possible even if this message
is displayed.
143
Reference
page
Message
Cause & Troubleshooting
This DVD cannot be
used. Please replace
DVD.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
24
107
—
This DVD is finalized.
This message will appear if you press the FINALIZE button with a
Finalize is not required. finalised DVD-RW/DVD-R/+RW loaded in this DVD video camera/
recorder. Finalising the disc is not necessary.
This DVD is recorded by This DVD video camera/recorder can use only discs recorded on
the NTSC system.
Please replace DVD.
the PAL system. A disc recorded on the NTSC system cannot be
used on this DVD video camera/recorder.
UNFORMAT DVD
The disc is not initialised or it is damaged.
If this message appears, be sure to initialise the disc on this DVD
video camera/recorder before using it.
Reinitialising even a disc used on this DVD video camera/
recorder may be necessary (initialising will erase all recorded
contents on disc). If this message appears, try to initialise the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
104
See *2 on page 144.
10
—
UNFORMAT HDD
The HDD may not be initialised, or it may be destroyed.
Use AC adapter/
charger.
No dubbing, HDD deletion, or disc finalisation is possible with a
battery: Use the AC adapter/charger.
25, 79, 106,
107
Use AC adapter/
charger.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
Turn off power.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
25
Write protected.
Check card.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
24
Write protected.
Check HDD/DVD.
The HDD or disc is write-protected. Use the Disc Navigation
menu to release the protection.
105
*1
•
This message may also appear when dirt adheres to disc. If this message appears when a recorded disc is
recognised immediately after it is inserted, do not repair the disc; remove it and then use the provided disc
cleaning cloth to clean off the dirt before using it.
•
•
•
This message may also appear when condensation occurs. In this case, do not repair the disc; turn the DVD video
camera/recorder off, wait until it dries out, and then turn it on again.
If the repair message appears when you turn the DVD video camera/recorder on from off with a disc loaded
after recording on it, choose repair.
If the repair message appears when recording and playback are normally possible with another disc – and no
condensation occurs and the disc is not dirty – choose repair.
*2
•
This message may also appear when dirt adheres to disc. In this case, do not initialise the disc: Remove it and
then use the provided disc cleaning cloth to clean off the dirt before using it.
This message may also appear when condensation occurs. In this case, do not initialise the disc; turn the DVD
video camera/recorder off, wait until it dries out, and then turn it on again.
Initialisation will delete all data on disc.
•
•
*3
•
This message may also appear when dirt adheres to disc. Remove the disc and then use the provided disc
cleaning cloth to clean off the dirt before using it.
This message may also appear when condensation occurs. Wait until the DVD video camera/recorder dries out,
and then turn it on again.
•
*4
•
This message will appear when a single-sided disc is inserted in reverse. Reinsert the disc correctly. (Insert the
disc with the label printed surface facing the outside.)
*5
•
Do not insert a DVD-RW (VF-mode)/DVD-R that has not been finalised into any DVD recorder: The disc may be unusable.
144
Troubleshooting
Check to see the following before asking for a repair. If the suggested solution still cannot restore the
DVD video camera/recorder to normal, do not attempt to repair it yourself, but consult your dealer.
Power supplies
Reference
page
Symptom
Cause and Correction
Battery cannot be
charged.
Is the ambient temperature too low or too high?
Charge the battery at 10 – 30ºC.
Is the battery abnormally hot?
Remove the battery, leave it for a while to cool down, then charge it.
26
Is the DC power cord connected to AC adapter/charger? Unplug it.
Has the battery been unused for a long time?
Remove the battery, and then reattach it.
• If the battery does not charge after you try the above four
procedures, it may be dead: Purchase a new battery.
Battery weakens fast.
Are you using the DVD video camera/recorder where the
temperature is low?
A fully charged battery (DZ-BP07PW/DZ-BP14SW/DZ-BP7SW)
may be discharged sooner than usual at low temperatures. Keep
extra batteries on hand.
28
29
Battery may be dead.
The performance of battery will deteriorate if it is used for an
extended period of time or frequently: Purchase a new battery.
The CHARGE indicator Is the ambient temperature too low or too high?
on AC adapter/charger Charge the battery in environment where the temperature is 10 – 30ºC.
is blinking.
The battery has possibly discharged excessively. Continue
charging: After a while, the battery will be charged to the
specified voltage, and the CHARGE indicator will light. Then the
battery charge will be completed normally.
26, 27
Power turns off immediately Is battery charged?
after being turned on.
Charge it.
When power is turned
on, the LCD screen will
turn on and off.
26
The ACCESS/PC
indicator is blinking,
even though nothing is
displayed on LCD
monitor screen.
Power goes off
unexpectedly.
Is Power Save set to “On”?
If the powered DVD video camera/recorder is left for as long as 5
minutes without recording or playback with “Power Save: On”
specified, it will automatically turn off to save battery power. To
restart recording in this case, set the power switch to “OFF” and
then set it to “HDD”, “DVD” or “SD”. You can also specify “Power
Save: Off” to stop automatic power off.
33
42
Is the DVD video camera/recorder set to the sleep/restart status?
If 30 minutes or more has elapsed with the DVD video camera/
recorder in the sleep/restart status, it will automatically turn off.
Set the power switch to “OFF”, and then power the DVD video
camera/recorder again.
145
Reference
page
Symptom
Cause and Correction
Power cannot be turned Detach the battery or AC adapter/charger once, and then press the
off.
RESET button of DVD video camera/recorder: Reattach a power
supply to DVD video camera/recorder before turning it on again.
25, 27, 152
Even if the DVD video
The DVD video camera/recorder will automatically turn on to
camera/recorder is off, recognise a disc: Closing the cover will automatically turn the
opening the cover will
cause the ACCESS/PC
indicator to blink.
DVD video camera/recorder off.
38
During recording
Symptom
Reference
page
Cause and Correction
Pressing the REC
button will not start
recording.
• Check to see whether the proper type of DVD is loaded.
• Set the power switch to “HDD” or “DVD”.
• If the input image is copy-guarded, it cannot be recorded.
• If HDD/DVD is protected, end protection.
23, 30, 105,
107, 116
• No recording can be done on a finalised DVD.
• Check the remaining free space on HDD/DVD.
• If, when using a +RW, one-time recording duration is short or you
frequently switch the video quality, recording may not be possible
even when the disc has remaining space.
Recording starts but
stops immediately.
Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc. If there is still no improvement, replace the disc.
10
Is some other AV device directly connected to the video/audio
input/output jack of this DVD video camera/recorder?
If the AV device is connected via several other devices, such as
AV selector, the video signal may not be transmitted incorrectly.
In such a case, reduce the number of devices through which the
video signal is transmitted, or connect AV device directly.
115
Are you attempting to record image from video game or PC?
From some video games or PCs, image cannot be recorded on
this DVD video camera/recorder.
—
No photo can be
recorded
• Check to see whether the proper type of card is loaded.
• Set the power switch to “SD”.
• If the card is locked, unlock it.
24, 30, 105
• Check the remaining free space on card.
LCD screen is hard to
see.
Has brightness of LCD screen been adjusted?
Stop recording and adjust the brightness.
35
31
Is the DVD video camera/recorder being used outdoors?
Use the viewfinder. When using LCD monitor, adjust its angle so
that LCD screen is not exposed to direct sunlight.
Unevenness appears on Did you press the LCD monitor or the area around it?
LCD monitor screen.
If the LCD monitor is pressed, some unevenness will occur.
Release your hand and leave the LCD monitor for a while:
Normal display will be restored.
—
146
Reference
page
Symptom
Cause and Correction
Focus is not correct.
Is it difficult to use auto focus with your subject?
Focus manually.
53
Does manual focus icon appear?
The DVD video camera/recorder is set to manual focus. Focus
the subject manually, or release manual focus.
52
Is the dioptre control correctly adjusted if you are using the
viewfinder as a monitor?
Adjust the dioptre control.
31
30
In cases other than the above, set the power switch to “OFF”, and
then set it to “HDD”, “DVD” or “SD” again.
An error message for
repair appears.
Perform repair following the instructions on screen.
Repair is possible when the DVD video camera/recorder is powered
by the AC adapter/charger. If you are using the HDD and have
detected an error in part of video file, a battery can also be used for
repair (if the remaining battery level indicator shows more than half
level).
25
It will take from a few minutes to several hours for repair. If you
wish to start recording immediately, remove the disc, and then
insert another disc: The removed disc can later be repaired by
connecting the AC adapter/charger.
If during recording light This is not a fault.
(sunlight, etc.) enters
Adjust the angle of the DVD video camera/recorder so that sunlight,
the DVD video camera/ etc. does not enter.
recorder through the
lens from above, ghosts
may occur in the
Putting a protective hand over the lens may improve the ghosts.
—
recorded image.
During playback
Symptom
Reference
page
Cause and Correction
Recognition of disc is
not complete.
Is disc dirty?
Use the provided disc cleaning cloth to clean it.
10
Pressing the playback
button will not start
playback.
Has the image been recorded by devices other than this DVD
video camera/recorder?
Playback of image recorded on devices other than this DVD video
camera/recorder may be impossible on this DVD video camera/
recorder.
69
Has scene been edited on a device other than this DVD video
camera/recorder?
If a scene recorded on this DVD video camera/recorder is edited
on a device other than this DVD video camera/recorder, playback
may not be possible on this DVD video camera/recorder.
No playback picture
Is TV input selector set correctly?
appears on TV screen. Some TVs have multiple video input jacks. Check whether the
correct input was selected on TV to match the connected jacks. If
the DVD video camera/recorder is connected to VCR, set its
input selector to “external input (LINE)”.
113
112
Is the DVD video camera/recorder connected to TV correctly?
Check the connections.
147
Reference
page
Symptom
Cause and Correction
Playback picture is
momentarily interrupted. Clean the disc.
Is disc scratched or does dirt or fingerprint adhere to it?
10
Poor playback picture.
Was the image input from analogue VCR (VHS, 8 mm) and
recorded?
—
The problem may be improved if a VCR equipped with TBC
circuit is used for playback.
Playback picture is
greatly distorted.
Was recording of external input made with “Frame” specified?
Specify “Field” for “PHOTO Input” in record functions setup.
64
No sound.
Is the TV volume control set correctly?
Adjust TV volume control, and be sure to adjust the volume on
TV.
113
Disc Navigation
thumbnails do not
appear.
Was the image recorded from AV input/output jack with
interference?
Record image with no noise or disturbance.
—
—
—
Photos on card cannot This DVD video camera/recorder can play back image data
be played back.
recorded on SD memory card in other digital cameras conforming
to the DCF (Design rule for Camera File system) standard. The
range of image data normally playable on this DVD video
camera/recorder is that with pixels from 80 horizontal × 60
vertical to 4000 horizontal × 3000 vertical. If the pixel data is
outside this range, blue thumbnails will appear (thumbnails* in
the figure), meaning the image is unplayable.
Al
l
scenes
1/ 6
PHOTO
PLAY
SELECT
*
Fig. 1
Even when the number of pixels is within the above range,
playback may not be possible, depending on the recording status
of the digital cameras used.
DCF (Design rule for Camera File system) is an integrated image
file format of digital cameras: Image files can be used on all
digital devices conforming to DCF.
It will take some time to When playing back a still, “Playback.” will appear: Stills with a
play back photos on
card.
large number of pixels will take some time to appear.
When the DVD video camera/recorder is connected to PC
Reference
page
Symptom
Cause and Correction
No drive icon appears
on PC.
The DVD video camera/recorder is not turned on.
Check the power supply.
30
—
—
Turn PC off and then disconnect the PC connection cable. Turn
PC on again, and then use the PC connection cable to connect
the DVD video camera/recorder to PC.
Make sure the PC connection cable is completely plugged into
this DVD video camera/recorder.
148
Reference
page
Symptom
Cause and Correction
Error occurs in playback If error occurs with USB connection, the transfer rate is not
of DVD video camera/
recorder on PC.
sufficient. It is recommended that you use a USB terminal
conforming to USB2.0 when connecting the DVD video camera/
recorder.
119
—
Application is not
normally run on PC.
Turn the PC and DVD video camera/recorder off, and try again.
Error occurs during
writing to disc.
The temperature of DVD video camera/recorder is too high due
to continuous operation.
Disconnect the DVD video camera/recorder from PC once,
remove the disc from the DVD video camera/recorder, and then
turn it off. After a few moments, connect them again and write to
a brand-new disc.
—
—
Transfer of images
stops.
Connect the DVD video camera/recorder to another USB terminal
of PC. If your PC is a desktop type, it is recommended that you
use USB terminal on the back of PC. If you are using USB2.0
extended card, it is also recommended that you install the newest
version driver provided by each USB2.0 card maker.
Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc.
10
—
DVD drive built into PC This problem may be solved if you update the DVD editing/
cannot be used after the creating software of your PC.
provided software has
been installed.
Error appears when
starting ImageMixer 3. DirectX 9.0c.
Make sure that your PC display adapter (video card) conforms to
119
30
®
Movies are not
recognised by
Make sure the power switch of this DVD video camera/recorder is
set to “HDD” or “DVD”.
application in PC.
The DISC EJECT
While the DVD video camera/recorder is connected to PC, use
button is not valid when Explorer to right-click the DVD video camera/recorder drive icon
the DVD video camera/ and execute “Eject”.
recorder is connected to
PC.
124
131
No sound is heard when Since an MPEG file imported into Macintosh using ImageMixer 3
an MPEG file imported Mac Edition for DVDCAM uses the audio format of AC3 audio, no
into Macintosh is played audio will be played back even if the Quick Time MPEG-2
back on Quick Time
with an MPEG 2
playback component
adopted.
playback component is introduced: Only video will be played
back. Use ImageMixer 3 Mac Edition for DVDCAM for playback.
When the time stamp of The file system of this DVD video camera/recorder is operated on
file in DVD-RAM is
viewed on PC, it is
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows as of January, 2007, the time stamp of
®
—
—
different from the actual file viewed on Explorer looks different from the actual recording
recording time.
time. The actual recording time will appear for date/time
indication on playback screen.
It will take some time to If you are editing a video file whose contents are different from
save a video edited on those of project setting, it may take some time, since the entire
the video editor of
ImageMixer 3.
video file must be re-encoded. Reconfirm the project setting.
149
Reference
page
Symptom
Cause and Correction
®
“Hardware Removal”
results in error.
Exit Windows once, and then disconnect the DVD video camera/
®
recorder. If your PC uses Windows 2000 Professional, the
problem may be solved if you install Windows 2000 SP3 or later.
126
®
No USB HS (high
Make sure that you have already installed the driver provided with
speed) connection even the USB2.0 card.
—
when USB2.0 card is
used.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
Miscellaneous
Symptom
Reference
page
Cause and Correction
No DVD video camera/ Is a fully charged battery attached?
recorder operation.
Is the DVD video camera/recorder powered from AC outlet?
25, 26
152
—
Power does not come
on, or no operation
occurs by pressing
button.
Execute system reset (press the RESET button).
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your
dealer.
The date and time are
incorrect.
Has the DVD video camera/recorder been left unused for a long
period of time?
The internal backup memory battery may be discharged:
Charge it.
32
42
Pressing the SLEEP/
RESTART button will
not set to the sleep/
restart standby status.
• Is the proper disc or card loaded?
• Does the HDD, disc or card have remaining free space?
• Is the DVD video camera/recorder now playing back?
• Is Disc Navigation screen displayed?
No scene can be
deleted.
Is the cursor placed on the scene to be deleted?
If the selected scene (framed in red) exists, that scene will be
deleted even if you use yellow cursor to select any scene. Check
the colours of cursors and bar graph on the thumbnail screen.
74, 84
Disc cannot be
removed.
Did you detach the battery or AC adapter/charger before setting
the power switch to “OFF”?
(Cover will not open.)
Is the battery charged?
Connect a charged battery or the AC adapter/charger, and then
press the DISC EJECT button to remove the disc.
Did the DVD video camera/recorder turn off because the battery
remaining level ran out?
25, 26, 30
Connect a charged battery or the AC adapter/charger, set the
power switch to “OFF”, and then press the DISC EJECT button to
remove the disc.
Is the power switch set to “HDD” or “SD”?
Set the power switch to “DVD” or “OFF”, and then press the DISC
EJECT button.
Disc cover cannot be
closed.
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
37
Connect a fully charged battery or AC adapter/charger, and then
turn the DVD video camera/recorder on.
25, 27
150
Reference
page
Symptom
Cause and Correction
Operating sound is
heard cyclically.
This sound is heard because the disc is cyclically operated and
does not indicate a fault.
—
Some vibrations are felt These vibrations or sound are caused by HDD/disc drive: This
or slight sound is heard does not indicate a fault.
from mechanism.
—
• No operation can be In the following cases, it will take more time than usual until
performed because
the ACCESS/PC or
CARD ACCESS
indicator on this DVD
video camera/
recorder remains lit or
blinking.
• After disc or card is
inserted, it takes
some time until
operation is possible:
• Immediately after a disc or card is reinserted.
• When a long time has elapsed since the DVD video camera/
recorder was turned off last.
• When the temperature is greatly different from the status of
previous recording.
• When disc with scratches, dirt or fingerprints is inserted.
• When disc is subject to severe vibrations.
• When the battery or DC power cord was disconnected instead
of following the correct procedure using power switch to turn
the DVD video camera/recorder off.
7, 37
recording is possible.
No image in viewfinder. • Is LCD monitor open?
No image will appear in viewfinder unless the LCD monitor is
closed and securely locked to DVD video camera/recorder.
• Is the DVD video camera/recorder set to the sleep/restart
31, 42
status?
Press the SLEEP/RESTART button to release the sleep/restart
status.
No image appears on
the LCD screen or in
the viewfinder.
• Is DVD video camera/recorder connected to PC using PC
connection cable?
Unplug the PC connection cable.
• Does DVD video camera/recorder stop at the end of the scene
to which wipe-out was set and played back?
Press the DISC NAVIGATION button.
• Is the DVD video camera/recorder set to the sleep/restart
status?
42, 87, 123
Press the SLEEP/RESTART button to release the sleep/restart
status.
151
System Reset
If the DVD video camera/recorder does not operate normally, perform “System Reset”: The DVD video
camera/recorder may recover to normal. “System Reset” will reset all settings to factory defaults. The date
and time will also be reset: Set the date and time again before using the DVD video camera/recorder.
1
2
Set the power switch to “OFF” to turn the
DVD video camera/reorder off.
Detach the battery or AC adapter/charger.
Note:
• Do not press the RESET button with undue force.
• Before pressing the RESET button, be sure to
remove the disc from the DVD video camera/
recorder: Pressing the RESET button with a disc
loaded may erase the scenes recorded on the
disc.
Use a fine tipped pen to hold down the
RESET button for several seconds.
All settings will be reset.
●List of setting items
Setting
Item
Default
method
Camera Functions
Setup
Program AE
Auto
p. 56
p. 57
p. 59
p. 50
p. 59
p. 60
p. 63
p. 61
p. 63
p. 64
p. 64
p. 65
p. 65
p. 32
p. 32
p. 35
p. 35
p. 36
p. 36
White Bal.
ElS
Auto
On
Dig.Zoom
MIC.Filter
120×
Off
Record Functions Setup VIDEO Mode
FINE
FINE
On
Quality
16:9
Input Source
PHOTO Input
Self Timer
OSD Output
CAMERA
Field
Off
On
HDD protection
Date Set
On
Date Setup
1/1/2007 0:00
D/M/Y
Date Mode
LCD/EVF Setup
LCD Brightness
EVF Brightness
Colour Level
EVF Display
Auto
152
Setting
method
Item
Default
Initial Setup
Beep
On
p. 33
p. 33
p. 34
p. 33
p. 34
Power Save
Record LED
Language
Demo Mode
Off
On
English
Auto
• Some items will not appear depending on the disc or card inserted.
Major Specifications
CCD
1/6-inch interlaced
Total number of pixels
approx. 800,000
Number of effective pixels
Movie:
Still:
approx. 410,000
approx. 410,000
Lens
F2.0 – 4.1
f = 2.3 – 69 mm
Filter diameter: 34 mm
Thread pitch: 0.5 mm
Focus
Zoom
Auto/Manual
Optical 30×,
120×–1500× with digital zoom added, 120× for still
Required minimum illumination
Viewfinder
0.3 lx in Low Light mode
0.2-inch colour (equivalent to approx. 200,000 pixels)
2.7-inch colour TFT (approx. 120,000 pixels)
Electronic type
LCD monitor
Electronic image stabiliser
Shutter speed
1/4 – 1/4000 seconds (movie)
Still recording only
Self-timer recording
Capacity of built-in HDD
Recording mode
Approx. 30 GB
Movie (with sound)
Still (with SD memory card)
Maximum
recordable
time
HDD
Approx. 7 hours (XTRA)
Approx. 11 hours (FINE)
Approx. 23 hours (STD)
DVD-RAM/DVD-RW/ Approx. 18 minutes (XTRA)
DVD-R/+RW
(per side)
Approx. 30 minutes (FINE)
Approx. 60 minutes (STD)
Maximum
number of
recordable
stills
SD memory card
(when using 32 MB
card)
Approx. 180 (in FINE mode)
Varies depending on the recording quality and the type of card
(p. 156).
153
Recording DVD-RAM/DVD-RW Movie:
format (VR-mode)
Conforming to DVD video recording (DVD-VR) format
(Dolby Digital)
DVD-RW (VF-mode)/ Movie:
DVD-R
Conforming to DVD video format (Dolby Digital)
+RW
Card
Movie: DVD+RW video format (Dolby Digital)
Still:
Conforming to JPEG (640×480 pixels) standard
MPEG Audio layer 2, linear PCM, Dolby Digital
Audio playback format
Recordable discs
8 cm DVD-RAM (conforming to DVD-RAM Ver. 2.1)
8 cm DVD-RW (conforming to DVD-RW Ver. 1.1, 2x speed [2x/1x])
8 cm DVD-R (conforming to DVD-R for General Ver. 2.0)
8 cm +RW (conforming to +RW Ver. 1.2)
Only discs not packed in Round DVD Holder or cartridge.
Recordable card
Jacks
SD memory card
Video/audio input/output × 1
,
PC connection terminal (connected to PC USB port) ×1
Battery system
Lithium-ion
Power consumption
When recording with LCD monitor off (DVD-RAM used)
approx. 3.2W (in FINE mode)
Dimensions
(W × H × D)
Approx. 69 × 91 × 132 mm
(excluding hand strap)
Operating temperature (humidity)
0 – 40ºC (less than 80%)
0 – 30ºC when connected to PC
Storage temperature
-20 – 60ºC
Allowable operating altitude (when 3000 m or less
using HDD)
Weight
Approx. 505 g (without battery or disc)
Total weight when recording
Provided accessories
Approx. 560 g
AC adapter/charger,
Battery,
AV/S input/output cable,
Lens cap, Lens cap string, Shoulder strap, Mains lead,
DC power cord, Software CD-ROM, PC connection cable,
Disc cleaning cloth
154
STORAGE CAPACITY OF HDD/DVD/CARD
*1
Recordable Time On HDD
Recording quality
Movie recordable time
Application
*2
XTRA
Approx. 7 hours
Best quality
High quality
*3
*4
FINE
STD
Approx. 11 hours
Approx. 23 hours
Standard quality
Recordable Time On Disc
Movie recordable time on one disc (on single side) (when recording only movies)
Recording quality
XTRA
Movie recordable time
Application
*2
Approx. 18 min
Best quality
High quality
*3
*4
FINE
STD
Approx. 30 min
Approx. 60 min
Standard quality
*
1: After recording for 9 hours, the DVD video camera/recorder will automatically stop recording: After approx. one
minute, it will automatically restart recording (no scene will be recorded during this recording pause). As a
result, multiple thumbnails will appear for the scene recorded continuously for more than 9 hours, even with one-
time recording of that scene.
*
2: Variable bit recording (recording of more than 7 hours on HDD or more than 18 minutes on disc may be
possible because the transfer rate varies automatically between approx. 3 - 10 Mbps)
3: Fixed bit rate: Approx. 6 Mbps
*
*
4: Fixed bit rate: Approx. 3 Mbps
Note:
• If you record in XTRA mode at high temperatures, the DVD video camera/recorder will heat up and the maximum
transfer rate will be limited to approx. 6 Mbps, so the best quality will not be obtainable.
Maximum Number of Scenes that Can Be Recorded/Dubbed on HDD/One Disc
Maximum number of scenes
Recording media
*1
*3
HDD
999
*2
*3
DVD-RAM/DVD-RW
999
*2
DVD-R
930
254
*2
+RW
*
*
*
1: Recording only
2: Per disc (one side)
3: Combining scenes will not increase the remaining number of recordable scenes.
If there are combined scenes, the total of all scenes displayed on the Disc Navigation screen and the remaining
number of recordable scenes may not be the same as the maximum number of scenes that can be recorded
and/or dubbed.
Maximum Number of Programmes that Can Be Recorded/Dubbed on HDD/One Disc
Maximum number of programmes
Recording media
*1
HDD
99
99
49
*2
DVD-RAM/DVD-RW
*2
+RW
*
*
1: Recording only
2: Per disc (one side)
155
RECORDABLE STILLS (PHOTOS) ON CARD
Capacity
Recording
quality
32 MB
Approx. 180
Approx. 240
Approx. 370
64 MB
Approx. 380
Approx. 500
Approx. 750
128 MB
256 MB
512 MB
1 GB
FINE
NORM
ECO
Approx. 750
Approx. 1,500 Approx. 3,000 Approx. 6,000
Approx. 1,000 Approx. 2,000 Approx. 4,000 Approx. 8,000
Approx. 1,500 Approx. 3,000 Approx. 6,000 Approx. 12,000
With external input
Capacity
Recording
quality
32 MB
64 MB
Approx. 380
Approx. 500
Approx. 750
128 MB
256 MB
512 MB
1 GB
FINE
NORM
ECO
Approx. 180
Approx. 240
Approx. 370
Approx. 750
Approx. 1,500 Approx. 3,000 Approx. 6,000
Approx. 1,000 Approx. 2,000 Approx. 4,000 Approx. 8,000
Approx. 1,500 Approx. 3,000 Approx. 6,000 Approx. 12,000
(The numbers of recordable stills above are only for reference)
Size And Quality Of Photos
The following table shows the file size and quality of one still (JPEG) recorded on card:
Quality
FINE
File size
Approx. 160 KB
Approx. 120 KB
Approx. 80 KB
Application
When image quality is prioritised
Standard quality
NORM
When number of stills is prioritised
(quality will be slightly inferior)
ECO
The quality mode can be chosen when recording stills on card (p. 63).
Note:
• No still can be recorded on HDD/DVD.
156
Index
Update Control Info. ................................. 106
DISC EJECT button .......................................... 37
Display
Information LCD ........................................ 43
Scenes information .................................... 93
Viewfinder ................................................ 31
Divide .............................................................. 85
Dubbing
Dubbed mark ............................................ 80
Dubbing from HDD to disc .......................... 79
Dubbing from/to other video devices .......... 115
Dubbing Menu .......................................... 79
DUBBING button .............................................. 80
DVD player ..................................................... 114
DVD-R ............................................................. 23
DVD-RAM ........................................................ 23
DVD recorder ................................................. 114
DVD-RW .......................................................... 23
Numerics
16:9 ................................................................ 61
8 cm bare disc .................................................. 23
A
AC adapter/charger ........................................... 25
ACCESS/PC indicator ....................................... 40
Add (edit) ....................................................... 100
All programmes ................................................ 94
Auto (programme AE) ........................................ 56
Autofocus ........................................................ 52
AV input/output jack ................................. 112, 115
B
Backlight correction ........................................... 54
Battery
Attaching to DVD video camera/recorder ...... 27
Charging .................................................. 26
Recordable time on DVD video camera/
recorder ................................................ 28
Removing from DVD video camera/
E
Edit (play List) .................................................. 99
EIS ................................................................. 59
EXPOSURE button ........................................... 54
Exposure control ............................................... 54
recorder ................................................ 27
Setting Up ................................................ 26
BATTERY EJECT button .................................... 27
Black & White fade ............................................ 87
Brightness ....................................................... 35
F
Fade ............................................................... 87
FIELD (PHOTO Input) ........................................ 64
Finalise DVD .................................................. 107
FINALIZE button ............................................. 107
FINE (VIDEO Mode) .......................................... 60
FOCUS button .................................................. 52
Format .......................................................... 104
FRAME (PHOTO Input) ...................................... 64
Frame advance/Frame back ............................... 70
Full Auto .......................................................... 55
FULL AUTO button ............................................ 55
Full Menu ......................................................... 48
C
Camera Functions Setup ................................... 49
Capacity ........................................................ 105
Card
Available .................................................. 24
Capacity ........................................ 105, 156
Format ................................................... 104
Handling .................................................. 24
Quality ..................................................... 63
Category ....................................................... 109
CHARGE indicator ............................................ 26
Cleaning ............................................................ 9
Colour Level ..................................................... 36
Connecting to TV ............................................ 112
Copy ............................................................... 90
Create ............................................................. 97
G
Go To (during playback) ..................................... 72
Go To (on Disc Navigation) ............................... 104
H
Hand strap ....................................................... 20
D
HDD
Date and time ................................................... 32
Date setup ....................................................... 32
Defaults ........................................................... 34
Delete (edit) ................................................... 101
Delete (play list) .............................................. 103
Delete (scene) .......................................... 84, 100
Detail (scene) ................................................... 93
Dig. Zoom ........................................................ 50
Dioptre control .................................................. 31
Disc
Format ................................................... 104
Protection .............................................. 105
Howling ......................................................... 112
I
Information display mode ................................... 43
Initial Setup ...................................................... 33
Input Source .................................................... 63
Available .................................................. 23
Finalise .................................................. 107
Format ................................................... 104
Handling .................................................... 9
Protection .............................................. 105
L
Language ........................................................ 33
Laser pickup block ............................................ 37
LCD monitor light .............................................. 57
Lens cap .......................................................... 21
157
Lens cap string attachment hole ..........................21
Linear PCM ....................................................154
Lock ................................................................91
LOCK switch .....................................................40
Low Light (Programme AE) .................................57
Detail .......................................................93
Divide ......................................................85
Fade ........................................................87
Move ................................................86, 102
Select ......................................................92
Skip .........................................................88
Searching for image ...........................................70
Select (play list) .................................................98
Select (programme) ...........................................94
Select (Scene) ..................................................74
Self Timer .........................................................64
Shoulder Strap ..................................................20
Skip (Scene) .....................................................88
Skip playback ....................................................71
Slide Show .....................................................111
Sports (Programme AE) .....................................56
Spotlight (Programme AE) ..................................56
STD (VIDEO Mode) ...........................................60
Submenu .........................................................85
M
Manual Focus ...................................................52
MENU button ....................................................48
MIC.Filter .........................................................59
Move .............................................................102
O
Optical 30x zoom lens ........................................50
OSD Output ......................................................65
P
PHOTO capture ................................................70
PHOTO Input ....................................................64
PHOTO/SELECT button ...............................41, 74
Play (play list) ...................................................98
Play (programme) ..............................................95
Play list ............................................................97
Add scenes ...............................................99
Add scenes (submenu) .............................100
Create ......................................................97
Delete ....................................................103
Delete scenes .........................................100
Delete scenes (submenu) .........................101
Move ......................................................102
Play .........................................................98
Select ......................................................98
Select scenes (submenu) ..........................101
Title .......................................................103
Portrait (Programme AE) ....................................56
Power Save ......................................................33
Power switch .....................................................30
Programme ......................................................94
Play .........................................................95
Select ......................................................94
Title .........................................................95
Programme AE .................................................56
Protect ...........................................................105
T
Tele-conversion lens ..........................................51
Thumbnail ........................................................67
Title (play list) ..................................................103
Title (programme) ..............................................95
TV type ..........................................................110
U
Update Control Info. .........................................106
V
VIDEO Mode ....................................................60
FINE ........................................................60
STD .........................................................60
XTRA .......................................................60
Video selector ...........................................62, 116
Volume ............................................................68
W
White Bal. .........................................................57
White fade ........................................................87
Wide conversion lens .........................................51
Wipe fade .........................................................87
Q
X
Quality (Card) ...................................................63
Quick Menu ......................................................48
QUICK MENU button .........................................48
XTRA (VIDEO Mode) .........................................60
Z
Zoom lever ...........................................50, 52, 68
R
Record button ...................................................40
Recording indicator ............................................34
Repeat Play ....................................................110
Reset
settings ....................................................34
system ...................................................152
RESET button .................................................152
+RW ................................................................23
S
Sand & Snow (Programme AE) ...........................56
Scene ..............................................................67
Combine ...................................................86
Delete ......................................................84
158
Be sure to read the following before opening
the package of CD-ROM
This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided
with this product, if you agree to the terms herein.
If you do not accept the terms of this Agreement, immediately return the unopened package of storage medium
and enclosed materials (printed matter, external package, and all others) to your dealer, or return only the package
of storage medium to your dealer.
Consult your dealer for any refund on the unused product. However, if only the package of storage medium is
returned, no refund is possible.
This Licence Agreement certifies that you were granted licence in the past.
Licence Agreement
■ Grant of Licence
• Hitachi, Ltd. nonexclusively grants you the right to install this programme in one computer and use it, but this
right cannot be transferred to a third party.
• You can duplicate one copy of this programme in a form readable on computer, but only for the purpose of
backup, and under the condition that the display concerning the copyright remains in the original status.
■ Prohibition
• This programme may not be used on network. If you wish to use it for multiple computers on network, you must
obtain the right of use for each computer from Pixela Corporation.
• You may not let any third party use this programme by granting reuse, transfer, lease, lending, etc.
• You may not modify, alter, decompile or deassemble all, or any part, of this programme or its accessories. And
you may not allow any third party do so.
■ Termination of Agreement
If you duplicate this programme and its accessories without permission, or fail to comply with the above granting
conditions, this agreement will automatically be terminated. In addition, Pixela Corporation may take legal action.
When the agreement is terminated, you will be obliged to discard this programme, its accessories and all
duplicates, or return them to Pixela Corporation.
■ Guarantee and Immunity
This programme and its accessories shall not, explicitly or implicitly, conform to the merchantability or
compatibility for your specific purpose of use. Pixela Corporation does not guarantee that the functions of this
programme will meet your needs or this programme will be free from interruption or error during its operation.
Under no circumstances will Pixela Corporation accept any responsibility for any direct or indirect losses or
damages you may incur from using this programme or activities relating to its use, or for any conflict occurring
between you and a third party originating from, or relevant to, use of this programme.
159
Hitachi Australia Ltd.
Level3,82
Waterloo Road
North Ryde N.S.W 2113
Tel: +61-2-9888-4100
Fax: +61-2-9888-4188
Hitachi Home Electronics Asia (S) Pte. Ltd.
438A Alexandra Road #01-01/02/03
Alexandra Technopark Singapore 119967
Tel: 65-6536-2520
Fax: 65-6536-2521
www.hitachiconsumer.com.sg
Hitachi Hong Kong Ltd.
18/F., Ever Gain Centre,
28 On Muk Street, Shatin, N. t.,
Tel: 852-2113-8883
Fax: 852-2783-0655
www.hitachi-hk.com.hk
Hitachi, Ltd. Japan
This manual was printed
with soy based ink.
Printed on recycled paper
QR71052 ©Hitachi, Ltd. 2007
Printed in Japan ON-M(I)
|