JVC Camcorder GV LS2 User Manual

JVC CAM Control (for iPad)  
User Guide  
English  
This is the instruction manual for the software (for iPad) for Live  
Streaming Camera GV-LS2/GV-LS1 made by JVC KENWOOD  
Corporation.  
The models compatible with this app are iPad, iPad2 or the new iPad  
(2012) with iOS 5.1.1.  
Chapter 1 Quick Operation Guide  
1. Have You Completed the Camera Setup?  
Camera setup must be performed before JVC CAM Control is used.  
Be sure to check that the camera video and audio can be played from the Web browser  
before proceeding to the next step.  
For details on setting up the camera, refer to the instruction manual supplied with the camera.  
2. Installing from the App Store  
Open the App Store on the iPad, and search for "JVC CAM Control".  
Select "JVC CAM Control" from the search results list, and touch [Install].  
3. Starting the App  
After the app installation is completed, the icon is displayed on the iPad Home  
screen.  
Touch this icon to start JVC CAM Control.  
4. Registering the Camera to Use  
The app starts.  
Touch the [CAMERA REGISTRATION] button.  
[Caution]  
This app can only be used with a Wi-Fi connection. If  
an error is displayed after touching the button, check  
whether the iPad is connected to a Wi-Fi network.  
On the right side of the display, the cameras in your  
network are listed.  
From the listed cameras, touch the camera you want  
to use.  
A login screen is displayed. Log in to the camera  
using the username and password that you set in the  
camera setup.  
[Caution]  
To prevent video from being leaked accidentally to third  
parties, be sure to change the username and password  
that are set when the camera is shipped.  
For details on changing the username and password,  
refer to the instruction manual supplied with the camera.  
1
Chapter 1 Quick Operation Guide  
5. Viewing Video  
Touch the Back button in the top left of the [CAMERA  
REGISTRATION] screen to display the monitor display.  
In this screen, you can operate the camera and view  
video.  
(For details on the functions of each button, refer to  
"Chapter 3 Screen Descriptions".)  
6. Stopping Video Viewing  
First, touch the button in the top right of the monitor  
display to return to the [CAMERA REGISTRATION]  
screen.  
To stop viewing video, touch the [CAMERA RELEASE]  
button in the [CAMERA REGISTRATION] screen to  
cancel the camera registration.  
7. Exiting the App  
Press the iPad Home button to exit the app.  
2
Chapter 2 Advanced Operations  
Viewing Video from Multiple Cameras  
JVC CAM Control (for iPad) enables you to switch  
between multiple cameras when viewing video.  
[Caution]  
To view video from multiple cameras, !rst you need to  
purchase the additional cameras.  
1. On the left side of the [CAMERA REGISTRATION] screen,  
select the slot in which to register the camera.  
2
2. In the camera list on the right side of the screen, touch  
the camera to use and log in. For details on logging in,  
refer to "4. Registering the Camera to Use" in "Chapter 1  
Quick Operation Guide".  
1
3. Touch the Back button in the top left of the screen to  
display the monitor display.  
4. You can now select a camera video by touching a  
camera thumbnail on the right side of the monitor  
display.  
Up to four cameras can be viewed at the same time.  
3
Chapter 2 Advanced Operations  
Using Body Movements to Operate the Camera  
A unique feature of the iPad version is the ability to operate the camera using body  
movements that the iPad sensor detects.  
1. Touch the button in the top left of the monitor display  
to enlarge the video.  
[Caution]  
This function can only be used with the GV-LS2 when  
the pan tilter device is connected. This function  
cannot be used with the GV-LS1. This function cannot  
be used with iPad 1.  
2. Hold the iPad in the body position shown in the  
diagram.  
3. Touch the Unlock button in the enlarged monitor  
display to enable the sensor.  
4. You can now operate the camera by rotating your body  
or tilting the iPad up or down.  
5. To disable this operation temporarily, touch the Lock  
button again.  
4
Chapter 2 Advanced Operations  
Using the Internet toViewVideo from a Camera in a Remote Location  
You can view video from a camera in a remote location  
via the Internet.  
1. Assign a URL to the camera, for example by using the  
camera's DDNS function. For details on assigning a  
URL to the camera using a function such as the DDNS  
function, refer to the camera's instruction manual.  
2. Touch the [ADD CAMERA] button displayed in the  
bottom area of the camera list on the right side of the  
[CAMERA REGISTRATION] screen.  
3. Enter the camera URL and a camera name.  
Enter any name for the camera, selecting one that  
makes it easy for you to identify the camera. Be sure not  
to use the same name as another camera.  
4. The camera you entered in step 3 is displayed in the  
camera list. Touch this camera.  
5. Touch [START] to start logging in.  
6. After successfully logging in, you can operate the  
camera in the same way as the other cameras.  
[Caution]  
t Viewing video may not be possible depending on your provider or network con!guration.  
If you cannot view video properly, !rst check the settings carefully, and if the problem persists,  
contact your provider or network administrator.  
t Video from the same camera cannot be viewed at the same time by multiple people.  
t Camera video posted on the Internet can be viewed by anyone who knows the username and  
password. This means it is very risky to use a password that anyone can guess.  
Set a username and password that cannot be identi!ed by other people. For details on  
changing the username and password, refer to the camera's instruction manual.  
5
Chapter 3 Screen Descriptions - [CAMERA REGISTRATION] Screen  
[CAMERA REGISTRATION] Screen  
%
&
"
'
(
#
$
Back button  
t [MPEG-2 TS(SD) + MotionJPEG]  
"
#
Use to stream via the Internet in standard quality  
using "Camera Driver".  
Returns to the monitor display.  
Recording onto the camera cannot be performed  
in this mode.  
Camera registration slots  
Register cameras in this location.  
t [MotionJPEG]  
Touch to select the slot in which to register the  
camera.  
Recording onto the camera can only be  
performed in this mode.  
[Caution]  
[CAMERA RELEASE] button  
$
The stream setting cannot be con#gured when  
connected to the camera via the Internet.  
Removes a camera that has already been  
registered in a camera slot.  
Resource settings  
%
&
Camera list  
'
(
You can set the audio and video on or o!.  
The cameras connected to the LAN and the  
cameras added manually with the [ADD CAMERA]  
button are displayed here.  
[STREAM SETTING] button  
Use to change the stream setting of the camera.  
Various restrictions apply depending on the  
stream setting of the camera, so use the setting  
appropriate for the time or situation.  
Touch a camera to start camera registration.  
[ADD CAMERA] button  
Use to add a camera manually.  
Use in situations such as when viewing a camera  
in a remote location via the Internet.  
t [MPEG-2 TS(HD) + MotionJPEG]  
Use to stream via the Internet in HD quality using  
"Camera Driver".  
Recording onto the camera cannot be performed  
in this mode.  
6
Chapter 3 Screen Descriptions - Monitor Display  
Monitor Display  
& ' (  
) *+ , -  
.
"
#
/
$
%
0
1
[ZOOM]  
Pan/tilt  
: Write lock applied  
"
#
Approximate time available for recording  
Power indicators  
,
-
Changes the direction of the camera.  
Touch to change the movement speed.  
[PRESET] buttons  
: When battery power used  
: When AC power used  
To the setting screen  
$
.
/
You can restore pan/tilt and zoom positions for  
the camera.  
Camera registration slots  
Touch  
before touching a [PRESET] button to  
Touch to change the camera displayed in the  
video display.  
save the current pan/tilt and zoom positions of  
the camera.  
Start recording, stop recording  
0
Return camera to center  
%
Starts or stops video recording.  
Returns the camera direction to the center.  
To the monitor display (enlarged display)  
To record a video, touch the button to unlock,  
and then start recording.  
&
'
Video display  
To record, the camera stream setting must be  
[MotionJPEG] and an SD card must be inserted.  
[FOCUS]  
You can change the camera direction by dragging  
your !nger on the display.  
1
Camera direction, zoom ratio  
(
)
: Adjusts the focus automatically.  
: Use to adjust the focus manually.  
Recording/stopped indicators  
: Recording  
: Stopped  
Adjust by touching the and  
buttons.  
Recording quality  
*
+
SD card indicators  
: SD card inserted  
: SD card not inserted  
7
Chapter 3 Screen Descriptions - Monitor Display (Enlarged Display)  
Monitor Display (Enlarged Display)  
3
2
4
5
To the monitor display (normal display)  
Return pan direction to center  
2
3
Returns the pan direction (horizontal direction) to  
the center.  
Camera direction  
4
5
Lock button  
Touch to enable the camera direction to change  
according to the tilt of the tablet.  
Touch again to turn o!.  
8
Chapter 3 Screen Descriptions - [CAMERA SETTINGS]  
Changing the Camera Settings  
1. Touch  
.
2. Touch [CAMERA SETTINGS].  
3. Select the item to set by touching it.  
9
Chapter 3 Screen Descriptions - [APP SETTINGS]  
Changing the App Settings  
1. Touch  
.
2. Touch [APP SETTINGS].  
[DISPLAY ZOOM GUIDE]  
"
When using GV-LS1, sets whether to enable a  
double tap to display a zoom guide that indicates  
the range available for 4x zoom.  
[ZOOM SPEED]  
#
$
%
Sets the speed for zooming the camera.  
[BACKGROUND]  
You can change the background color of the app.  
[SPLASH]  
3. Select the item to set by touching it.  
Sets whether to display the splash screen after  
starting the app.  
[CAMERA RESOURCE SETTING]  
&
[VIDEO]: When registering the camera, set  
whether to use video.  
[AUDIO]: When registering the camera, set  
whether to use audio.  
[CONTROL]: When registering the camera, set  
whether to perform camera control.  
10  

Casio Cash Register 140CR 140CR User Manual
Casio Desk Calculator With Check Correct Function DJ120D User Manual
IDEAL INDUSTRIES Tone Generator and Amplifier Probe 62 140 User Manual
Intellinet Network Solutions Car Video System 521796 User Manual
JVC 8000 SERIES 42PFL8803D User Manual
JVC Car Stereo System KD G126 User Manual
JVC GET0117 001A User Manual
JVC GR D750U User Manual
JVC GR SXM25 User Manual
JVC GR SXM757 User Manual