JVC CD Receiver KD SH77R User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-SH77R/KD-SH55R

KD-SH77R

ATT

ANGLE

KD-SH55R

AUX

SEL

VOLUME

RM-RK100

For installation and connections, refer to the separate manual.

Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.

Pour l’installation et les raccordements, se référer au manuel séparé.

Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het

toestel.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

LVT0625-001A

[E/EX]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

OTHER MAIN FUNCTIONS ............... 23

Setting the clock ...................................... 23

Changing the general settings (PSM) ...... 23

Assigning names to the sources .............. 27

Changing the control panel angle............. 28

Detaching the control panel...................... 29

LOCATION OF THE BUTTONS............

Control panel ...........................................

Remote controller ....................................

Preparing the remote controller ................

BASIC OPERATIONS ......................

EXTERNAL COMPONENT OPERATIONS.. 30

Playing external components ................... 30

RADIO BASIC OPERATIONS .............

Listening to the radio ................................

Storing stations in memory .......................

CD CHANGER OPERATIONS ............. 32

Playing CDs ............................................. 32

Selecting CD playback modes.................. 33

Tuning into a preset station ...................... 10

RDS OPERATIONS ........................ 11

What you can do with RDS EON.............. 11

Other convenient RDS functions and

DAB TUNER OPERATIONS ............... 34

Tuning into an ensemble and one of the

services ................................................. 34

Storing DAB services in memory ............. 36

Tuning into a preset DAB service ............. 37

What you can do more with DAB.............. 37

adjustments ........................................... 14

CD OPERATIONS .......................... 17

Playing a CD ............................................ 17

Playing a CD text ..................................... 18

Locating a track or particular portion

ADDITIONAL INFORMATION............. 38

on a CD ................................................. 18

Selecting CD playback modes.................. 19

Prohibiting CD ejection ............................. 19

MAINTENANCE ............................ 39

Handling CDs .......................................... 39

TROUBLESHOOTING...................... 40

SPECIFICATIONS .......................... 41

SOUND ADJUSTMENTS .................. 20

Adjusting the sound ................................. 20

Selecting preset sound modes ................. 21

Storing your own sound adjustments ....... 22

About the demonstration mode (DEMO MODE)...

While shipped from the factory, “DEMO MODE” is set to “DEMO ON” in this unit.

The following demonstration, introducing the main features equipped for this unit, will appear on the

display automatically if no sound comes in for 3 minutes. (See page 26.)

• 24bit DAC

: (24 bit digital-analog converter: Gives you a high quality sound after D/A

conversion.)

• HS TUNER

• EQUALIZER

: (High-Sensitivity Tuner: Enables a fine reception of stations.)

: (Allows you to fine-adjust the sound to match your preference.)

• SUB WOOFER : (ONLY for KD-SH77R: Enables you to connect a subwoofer and to adjust its

output level.)

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the

tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore,

lower the volume before playing a disc and adjust it as required during playback.

LOCATION OF THE BUTTONS

Control panel

1 0 (eject) button

2 Control dial

q Auxiliary input jack

(control panel release) button

3 SEL (select) button

e Remote sensor

4 EQ (equalization) button

r Number buttons

5 D (display) button

• MO (monaural) button

• LO (local) button

6 TP (traffic programme) button

7 PTY (programme type) button

8 M/B (mode/band) button

• INT (intro scan) button

• RPT (repeat) button

• RND (random) button

• Video component operation buttons

(ONLY for KD-SH77R)

9 ¢

4buttons

•

Also functions as SSM buttons when pressed

together.

t SOURCE

(standby / on) button

ATT (angle / attenuator) button

y Reset button

How to use the number buttons:

If you press M/B (mode/band), the unit goes into functions mode and the number buttons work as

different function buttons.

Normally

Equalizing

pattern indicator

During

functions mode

Time countdown

indicator

To use these buttons as number buttons again after pressing M/B (mode/band), wait for 5 seconds

without pressing any number button until the functions mode is cleared.

• Pressing M/B (mode/band) again also clears the functions mode.

3 Changes the angle of the control panel in three

Remote controller

positions.

4 Selects the sound modes.

Each time you press the button, sound modes

change.

ATT

ANGLE

5 • Searches stations while listening to the radio.

• Selects ensembles while listening to the DAB

tuner if pressed briefly.

• Selects services while listening to the DAB

tuner if pressed and held.

• Fast-forwards or reverses the track if pressed

and held while listening to a CD.

• Skips to the beginning of the next track or goes

back to the beginning of the current (or

previous tracks) if pressed briefly while

listening to a CD.

DAB

DISC

PRESET

R D

DISC

AUX

SEL

6 Changes the preset channel number while

listening to the radio (or the DAB tuner).

Each time you press the button, the preset

channel number changes, and the selected

station (or service) is tuned into.

VOLUME

RM-RK100

7 Changes the disc number while listening to the

CD changer.

Each time you press the button, the disc

number changes, and the selected disc starts

playing.

The R•D button does not function

for this model.

8*** Selects the sound adjustment items.

Each time you press the button, the items

change.

1 • Turns on the unit if pressed when the unit is

turned off.

• Turns off the unit if pressed and held until “SEE

YOU” appears on the display.

• Drops the volume level if pressed briefly, and

“ATT” flashes on the display.

9*** • Changes the volume.

• Adjusts the sound mode (after SEL is

pressed).

Press again to resume the volume.

2 • CD : Selects CD player.

Without connecting the DAB tuner or CD

changer, you cannot select it as the source to

play.

• FM : • Selects FM tuner if select briefly.

Each time you press the button, FM

band (FM1, FM2 and FM3) changes.

** ONLY for KD-SH55R: To select the external

component, you have to change the external

component setting (see page 26).

***These buttons do not function for the preferred

setting mode adjustment.

•

Selects DAB tuner if pressed and held.*

Each time you press and hold the

button, DAB band (DAB 1, DAB 2 and

DAB 3) changes.

• AM : Selects AM tuner.

• CH : Selects CD changer.*

• AUX : Selects the external components.

Each time you press the button, “AUX

INPUT” and “LINE INPUT”** are

alternately selected.

2. Place the battery.

Preparing the remote controller

Slide the battery into the holder with the + side

facing upwards so that the battery is fixed in

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

the holder.

Lithium coin battery

(product number:

CR2025)

3. Return the battery holder.

Insert again the battery holder pushing it until

you hear a clicking sound.

Remote sensor

(back side)

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the

remote controller decreases, replace the battery.

WARNING:

• Store the battery in a place where children cannot

reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not recharge, short, disassemble or heat the

battery or dispose it in a fire.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

Doing any of these things may cause the battery to

give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off heat,

crack or start a fire.

(back side)

• When throwing away or saving the battery, wrap it

in tape and insulate; otherwise, the battery may

start to give off heat, crack or start a fire.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off heat,

crack or start a fire.

BASIC OPERATIONS

Note:

When you use this unit for

the first time, set the built-in

clock correctly, see page 23.

1 Turn on the power and select the

source.

2 Adjust the volume.

To increase the volume.

When you press the button for

the first time, the power comes

on. Then each time you press

the button, the source changes

as follows.

To decrease the volume.

Volume level appears.

For KD-SH77R

CD PLAY

FM TUNER

DAB TUNER

AUX INPUT

CD CHANGER

LINE INPUT

Volume level indicator

AM TUNER

Note:

For KD-SH55R

FM TUNER

After adjusting the volume, you can push in the

control dial to avoid unintended operations.

To use it again, push the control dial again to

make it come out.

CD PLAY

DAB TUNER

AUX INPUT

AM TUNER

CD CHANGER

***

LINE INPUT

3 Adjust the sound as you want.

If a CD is not in the loading slot, you cannot

select CD as the source to play.

(See page 20.)

** Without connecting the DAB Tuner or the CD

changer, you cannot select it as the source to

play.

***ONLY for KD-SH55R: To select the external

component, you have to change the external

component setting (see page 26).

To drop the volume in a moment

Press and hold

/ATT while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press and

hold the button again.

• If you turn the control dial clockwise, you can

also restore the sound.

To operate the tuner (FM or AM),

see pages 8 – 10.

To operate the CD player,

see pages 17 – 19.

To operate external components (AUX

INPUT and LINE INPUT),

see pages 30 – 31.

To turn off the power

Press and hold SOURCE

appears on the display.

until “SEE YOU”

To operate the CD changer,

see pages 32 – 33.

To operate the DAB tuner,

see pages 34 – 37.

RADIO BASIC OPERATIONS

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or

manual searching to tune into a particular station.

To turn in FM stations only with strong signals

1 Press M/B (mode/band) to enter the functions

mode while listening to an FM broadcast and

then, the number buttons can work as different

function buttons. (See page 4.)

2 Press LO (local) while still in the functions

mode, so that the LOCAL indicator lights up on

the display.

This function works only while searching FM

stations, including SSM preset.

Each time you press the button, the LOCAL

indicator lights up and goes off alternately.

Searching a station automatically:

Auto search

1 Select the FM or AM.

1 Press SOURCE

repeatedly to select FM

or AM as the source.

2 If necessary, to select

the FM band number,

press and hold M/B

(mode/band) for more

than 1 second

repeatedly.

Searching a station manually:

Manual search

Each time you press and

hold the button, the FM

band changes as follows:

1 Select the FM or AM.

1 Press SOURCE

FM 1

FM 2

FM 3

Selected band appears.

repeatedly to select FM

or AM as the source.

2 If necessary, to select

the FM band nunber,

press and hold M/B

(mode/band) for more

than 1 second

repeatedly. Each time

you press and hold the

button, the FM band

changes as follows:

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching a station.

Press ¢

to search

stations of higher

frequencies.

FM 1

FM 2

FM 3

Press

stations of lower

frequencies.

4 to search

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

When a station is received, searching

stops.

2 Press and hold ¢

4 until

Storing stations in memory

“M” (manual) starts flashing on the

display.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2 and FM3).

3 Tune into a station you want while“M”

1 Select the FM band (FM1 – 3) you want

to store FM stations into.

1 Press SOURCE

is flashing.

Press ¢

to tune

into stations of higher

frequencies.

repeatedly to select FM.

2 If necessary, press and

hold M/B (mode/band)

for more than 1 second

repeatedly. Each time

Press

into stations of lower

frequencies.

4 to tune

you press and hold the

button, the FM band

changes as follows:

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing until you release the

button.

FM 1

FM 2

FM 3

2 Press and hold both buttons for more

When an FM stereo broadcast is hard to

receive:

than 2 seconds.

1 Press M/B (mode/band) to enter

the functions mode while listening

to an FM stereo broadcast.

2 Press MO (monaural), while still in

the functions mode, so that the

MO indicator lights up on the

display.

“SSM” appears, then

disappears when automatic

preset is over.

• Each time you press the button,

the MO indicator lights up and

goes off alternately.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons

— No. 1 (lowest frequency) to No. 6 (highest

frequency).

Lights up when receiving

an FM broadcast in stereo.

The MO indicator lights

up.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved (the ST indicator

goes off).

Manual preset

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset the

stations again.

You can preset up to 6 stations in each band

(FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

1 Select the band (FM1–3, AM) you

want to store stations into (in this

example, FM1).

Tuning into a preset station

1 Press SOURCE

repeatedly to select FM

or AM as the source.

2 If necessary, to select

the FM band number,

press and hold M/B

(mode/band) for more

than 1 second

You can easily tune into a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on page 9.

1 Select the FM or AM.

1 Press SOURCE

repeatedly to select FM or

AM as the source.

repeatedly. Each time

you press and hold the

button, the FM band

2 If necessary, to select

the FM band number,

press and hold M/B

(mode/band) for more

than 1 second

changes as follows:

FM 1

FM 2

FM 3

repeatedly. Each time

you press and hold the

button, the FM band

changes as follows:

2 Tune into a station of 88.3 MHz.

Press ¢

to tune

into stations of higher

frequencies.

FM 1

FM 2

FM 3

Press

into stations of lower

frequencies.

4to tune

2 Select the number (1 – 6) for the preset

station you want.

3 Press and hold the number button (in

this example, 1) for more than 2

seconds.

If the sound quality decreases and the

stereo effect is lost while listening to

an FM station

In some areas, adjacent stations may interfere

with each other. If this interference occurs,

this unit can automatically reduce this

interference noise (the initial setting when

shipped from the factory). However, in this

case, the sound quality will be degraded and

the stereo effect will be also lost.

If you do not want to degrade the sound

quality and to lose the stereo effect, rather

than to eliminate the interference noise, see

“To change the FM tuner selectivity – IF

FILTER” on page 26.

“P1” flashes for a while.

4 Repeat the above procedure to store

other stations into other preset

numbers.

RDS OPERATIONS

To use Network-Tracking Reception, press and

holdTP (traffic programme) for more than 1 second.

Each time you press and hold the button, Network-

Tracking Reception modes change as follows:

What you can do with RDS EON

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals.For example, the stations send

their station names, as well as information about

what type of programme they broadcast, such as

sports or music, etc.

Mode 1

Mode 2

Mode 3

(AF)

(AF/REG) (Canceled)

Another advantage of RDS function is called “EON

(Enhanced Other Networks).” The EON indicator

lights up while receiving an FM station with the EON

data. By using the EON data sent from a station,

you can tune into a different station of a different

network broadcasting your favorite programme or

traffic announcement while listening to another

programme or to another source such as CD.

AF indicator

REG indicator

: lights

: goes off

By receiving the RDS data, this unit can do the

following:

REG

indicator indicator

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

Mode 1

Mode 2

Mode 3

• And some other functions

Mode 1

Network-Tracking Reception is activated with

Regionalization set to “off.”

Switches to another station within the same

network when the receiving signals from the

current station become weak.

Tracing the same programme

automatically (Network-Tracking

Reception)

When driving in an area where FM reception is not

good, the tuner built in this unit automatically tunes

into another RDS station, broadcasting the same

programme with stronger signals. So, you can

continue to listen to the same programme in its

finest reception, no matter where you drive. (See

the illustration on the next page.)

Two types of the RDS data are used to make

Network-Tracking Reception work correctly — PI

(Programme Identification) and AF (Alternative

Frequency).

• In this mode, the programme may differ from the one

currently received.

Mode 2

Network-Tracking Reception is activated with

Regionalization set to “on.”

Switches to another station, within the same

network, broadcasting the same programme

when the receiving signals from the current

station become weak.

Mode 3

Network-Tracking Reception is deactivated.

Without receiving these data correctly from the RDS

station you are listening to, Network-Tracking

Reception will not operate.

Note:

If a DAB tuner is connected and Alternative Reception

(for DAB services) is activated, Network-Tracking

Reception is also activated automatically. On the other

hand, Networking-Tracking Reception cannot be

deactivated without deactivating Alternative Reception.

(See page 37.)

The same programme can be received on

different frequencies.

PTY Standby Reception

When you press PTY while listening

Programme 1

broadcasting

on frequency A

to an FM station, the PTY indicator is

lit during reception of a PTY station

and the PTY standby mode is

engaged. The selected PTY name

stored on page 13 flashes for 5

seconds.

Programme 1

broadcasting

on frequency E

• When the station being received is not a PTY station,

the PTY indicator flashes. Press ¢

Programme 1

broadcasting

on frequency B

to engage the PTY standby mode. “SEARCH” appears

on the display, and PTY station search starts. When a

PTY station is tuned into, the PTY indicator is lit.

Programme 1

broadcasting

on frequency C

Programme 1

broadcasting

on frequency D

7 If you are listening to a CD or other connected

components and wish to listen to a selected PTY

broadcast, press PTY to enter the PTY standby

mode. (The PTY indicator lights up.)

Using Standby Reception

If the selected PTY programme starts broadcasting

while the PTY standby mode is active, the selected

PTY name appears and the playback source

changes to the FM band. The selected PTY

programme can then be heard.

Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) and Traffic Announcement (TA)

from the current source (another FM station, CD or

other connected components).

• Standby Reception will not work if you are listening

to an AM station.

To deactivate the PTY standby mode, press PTY

again.

TA Standby Reception

When you press TP while listening to

an FM station, the TP indicator is lit

during reception of a TP (Traffic

Programme) station and the TA

standby mode is engaged.

• When the station being received is not a TP station,

the TP indicator flashes. Press ¢

to engage the TA standby mode. “SEARCH” appears

on the display, and TP station search starts. When a

TP station is tuned into, the TP indicator is lit.

7 If you are listening to a CD or other connected

components and wish to listen to a TP station,

press TP to enter the TA standby mode. (The TP

indicator lights up.)

If a traffic programme starts broadcasting while the

TA standby mode is active, “TRAFFIC” appears and

the playback source changes to the FM band.The

volume increases to the presetTA volume level (see

page 15) and the traffic programme can be heard.

To deactivate the TA standby mode, press TP

again.

Searching your favorite programme

Selecting your favorite programme for

PTY Standby Reception

You can search one of your 6 favorite programme

types stored in memory.

When shipped from the factory, the following 6

programme types have been stored in the number

buttons (1 to 6).

To store your favorite programme types, see

below.

To search your favorite programme type, see

page 14.

You can select your favorite programme for PTY

Standby Reception to store in memory.

When shipped from the factory, “NEWS” is stored

as the programme type for PTY Standby Reception.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 24.)

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

To store your favorite programme types

2 Select “PTY STBY” (standby) if not

shown on the display.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(PSM: see page 24.)

3 Select one of twenty-nine PTY codes.

(See page 16.)

Selected code name

appears on the display

and is stored into memory.

2 Select“PTY SEARCH”if not shown on

the display.

4 Press SEL (select) to finish the setting.

3 Select one of twenty-nine PTY codes.

(See page 16.)

Selected code name

appears on the display.

• If the code already stored

in memory is selected, it

will flash on the display.

CONTINUED ON THE NEXT PAGE

• If there is a station broadcasting a programme of

the same PTY code as you selected, that station

is tuned into.

• If there is no station broadcasting a programme

of the same PTY code as you selected, the

station will not change.

4 Press and hold the number button for

more than 2 seconds to store the PTY

code selected into the preset number

you want.

Note:

In some areas, the PTY search will not work correctly.

"MEMORY" and the selected code name will

flash alternatery and then only the selected

code name will continue flashing on the

display.

Other convenient RDS functions

and adjustments

5 Press SEL (select) to finish the setting.

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the

preset station is tuned into.

To search your favorite programme type

However, when the preset station is an RDS station,

something different will happen. If the signals from

that preset station are not sufficient for good

reception, this unit, using the AF data, tunes into

another frequency broadcasting the same

programme as the original preset station is

broadcasting. (Programme search)

1 Press and hold PTY (programme type)

for more than 1 second while listening

to an FM station.

• The unit takes some time to tune into another

station using programme search.

To activate programme search, follow the procedure

below.

• See also “Changing the general settings (PSM)”

on page 23.

The last selected PTY code appears.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Select one of the PTY codes stored in

the preset number buttons (1 to 6).

2 Press ¢

4to select

“P-SEARCH.”

3 Turn the control dial clockwise to select

“SEARCH ON.”

Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same

procedure and select “SEARCH OFF” in step 3 by

turning the control dial counterclockwise.

Ex.: When “ROCK M” is stored in preset

number button 2

PTY search for your favorite programme

starts after 5 seconds.

Changing the display mode while

listening to an FM station

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the preset

level.

• See also “Changing the general settings (PSM)”

on page 23.

You can change the initial indication on the display

to station name (PS NAME) or station frequency

(FREQUENCY) while listening to an FM RDS

station.

• See also “Changing the general settings (PSM)”

on page 23.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

4to select “TA VOL.”

3 Turn the control dial to set to the desired volume.

You can set it from “TA VOL 00” to “TA VOL 50.”

4 Press SEL (select) to finish the setting.

2 Press ¢

4to select “TUNER DISP”

(tuner display).

3 Turn the control dial to set to the desired indication

(“FREQUENCY” or “PS NAME”).

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

Note:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically using

the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings (PSM)”

on page 23.

By pressing D (display), you can change the display while

listening to an FM RDS station only.

Each time you press the button, the following information

appears on the display:

Station name

(PS NAME)

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

Station Frequency

(FREQUENCY)

2 Press ¢

4to select “AUTO ADJ.”

3 Turn the control dial counterclockwise to select

“ADJUST OFF.”

Programme type

(PTY)

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

• Then, the display goes back to the original indication

in several seconds.

To reactivate clock adjustment, repeat the same

procedure and select “ADJUST ON” in step 3 by

turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than 2

minutes after setting “AUTO ADJ” to “ADJUST ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the CT

data in the RDS signal.)

PTY codes

NEWS:

News

SOCIAL:

Programmes on social activities

AFFAIRS:

Topical programmes expanding

on current news or affairs

Programmes which impart advice

on a wide variety of topics

Sport events

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

PHONE IN: Programmes where people can

express their views either by

INFO:

SPORT:

EDUCATE: Educational programmes

DRAMA: Radio plays

CULTURE: Programmes on national or

regional culture

phone or in a public forum

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours, and

travel ideas and opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing, etc.

Jazz music

SCIENCE:

Programmes on natural science

and technology

VARIED:

Other programmes like comedies

or ceremonies

POP M:

Pop music

Rock music

Easy-listening music

Light music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in that

country’s language

ROCK M:

EASY M:

LIGHT M:

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce, trading,

the Stock Market, etc.

OLDIES:

FOLK M:

Classic pop music

Folk music

DOCUMENT: Programmes dealing with factual

matters, presented in an

investigative style

CHILDREN: Entertainment programmes for

children

CD OPERATIONS

Notes:

• When a CD is in the loading slot, selecting “CD” as

the source by pressing SOURCE starts CD play.

• When a CD is inserted upside down, the CD

automatically ejects.

Playing a CD

1 Open the loading slot.

The control panel moves down,

and the loading slot appears.

• When you play a CD Text, the disc title and performer

appear on the display. Then the current track title

appears on the display, followed by the truck number

and elapsed playing time. See also “Playing a CD

Text” (page 18) and “To select the scroll mode –

SCROLL” (page 25).

Note:

When an external component is

connected to the Auxiliary input jack,

Be careful of handling a CD.

If a CD Text includes much text information, some may

not appear on the display.

• If you change the source, CD play also stops (without

ejecting the CD).

2 Insert a disc into the loading slot.

The unit draws a CD, the

control panel goes back

To stop play and eject the CD

Press 0.

CD play stops, the control panel moves down,

then the CD automatically ejects from the loading

slot.

to the previous position

(see page 28), and CD

play starts automatically.

To return the control panel to the previous

position, press 0 again.

The display changes to show the following:

• If you keep the loading slot for one minute (or 30

seconds when you have ejected a disc with the

ignition key is turned to “OFF”) a beep sounds

and the control panel returns to the previous

position.

Pay attention to prevent CD and your finger from

being caught in between the control panel and

the unit.

Total track number of Total playing time of the

the inserted disc inserted disc

Note:

If the ejected disc is not removed for about 15 seconds,

the disc is automatically inserted again into the loading

slot to protect it from dust. (CD play will not start this

time.)

Current track Elapsed playing time

To go to the next track or the previous tracks

Playing a CD Text

Press ¢

briefly, while

In a CD Text, some information about the disc (its

disc title, performer and track title) is recorded.

You can show these disc information on the

display.

playing a CD, to go ahead

to the beginning of the next

track. Each time you press

the button consecutively, the

beginning of the next track

is located and played back.

1 Select text display mode while

playing a CD Text.

Press

4 briefly, while

Each time you press the button,

playing a CD, to go back to

the beginning of the current

track. Each time you press

the button consecutively, the

beginning of the previous

tracks is located and played

back.

the display changes as follows:

Disc Title / Performer

Current track no.

and Elapsed playing time

Track Title

Notes:

• The display shows up to 10 characters at one time

and scrolls if there are more than 10 characters.

See also “To select the scroll mode – SCROLL” on

page 25.

To go to a particular track directly

Press the number button corresponding to the track

number to start its playback.

• When you press D (display) while playing a

conventional CD, “NO NAME” appears for the disc

title/performer and the track title.

Locating a track or particular

portion on a CD

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

To fast-forward or reverse the track

Press and hold ¢

while playing a CD,

to fast-forward the track.

Elapsed playing time

Track number

Press and hold

while playing a CD,

to reverse the track.

To play back tracks repeatedly (Intro scan)

Selecting CD playback modes

You can playback the first 15 seconds of each

track sequentially.

To play back tracks at random (Random Play)

1 Press M/B (mode/band) to enter

the functions mode while playing

a CD. This unit enters the

functions mode.

1 Press M/B (mode/band) to enter

the functions mode while playing

a CD. This unit enters the

functions mode.

2 Press RND (random), while still

in the functions mode, so that

the RND indicator lights up on

the display.

Then, each time you press the

button, CD random play mode

turns on and off alternately.

2 Press INT (intro scan), while still

in the functions mode, so that

the “INTRO” appears on the

display.

Then, each time you press the

button, CD intro scan play mode

turns on and off alternately.

When the random mode is turned on, the RND

indicator lights up on the display and a track

randomly selected starts playing.

Track number of the currently playing track

Prohibiting CD ejection

To play back tracks repeatedly (Repeat Play)

1 Press M/B (mode/band) to enter

the functions mode while playing

a CD. This unit enters the

functions mode.

2 Press RPT (repeat), while still

in the functions mode, so that

the RPT indicator lights up on

the display.

You can prohibit CD ejection and can lock a CD

in the loading slot.

While pressing SEL (select),

press and hold 0 for more than 2

seconds. “NO EJECT” flashes on

the display for about 5 seconds,

and the CD is locked and cannot

be ejected.

Then, each time you press the

button, CD repeat play mode

turns on and off alternately.

Note:

If you press 0 while CD ejection is prohibited, the

control panel moves down, but the CD cannot be

ejected.

To return the display panel, to the previous position,

press 0.

To cancel the prohibition and unlock the CD,

press and hold 0 for more than 2 seconds again,

while pressing SEL.

“EJECT OK” flashes on the display for about 5

seconds, and the CD is unlocked.

SOUND ADJUSTMENTS

2 Adjust the level.

Adjusting the sound

To increase the level.

You can adjust the sound characteristics to your

preference.

To decrease the level.

1 Select the item you want to adjust.

Each time you press the button,

the adjustable items change as

follows:

Note:

Normally, the control dial works as the volume

control. So you do not have to select “VOL” to adjust

the volume level.

FAD*

S. BASS**

BAL

(Fader)

(Balance)

EXT VOL***

VOL

WOOFER****

(Subwoofer)

(External volume)

(Volume)

Indication

To do:

Range

FAD*

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

BAL

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

S. BASS**

EXT VOL***

Adjust the bass.

00 (min.)

08 (max.)

Adjust the output 00 (min.)

level through the

EXT OUT plugs. 12 (max.)

WOOFER**** Adjust the

subwoofer output

level.

00 (min.)

12 (max.)

VOL

Adjust the volume. 00 (min.)

50 (max.)

If you are using a two-speaker system, set the

fader level to “00.”

** The richness and fullness of the bass sound is

clearly maintained regardless of how low you set

the volume – Super Bass.

You can also adjust the level of Super Bass.

*** ONLY for KD-SH55R: This takes effect only when

the amplifier(s) or other component(s) are

connected to the EXT OUT plugs.

**** ONLY for KD-SH77R: This takes effect only when

a subwoofer is connected.

Notes:

Selecting preset sound modes

• You can adjust each sound mode to your preference,

and store it in memory.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

on page 22.

You can select a preset sound mode suitable to

the music genre.

• To adjust the bass reinforcement level temporarily,

see page 20.

1 Press EQ.

The last selected sound mode

is recalled, and it is applied to

the current source.

To store a sound mode separately for

each playback source (EQ Link)

The EQ indicator lights up.

Once you select a sound mode, it is stored in

memory. It will be recalled every time you select

the same source.

Ex.: When you have selected “FLAT” previously

A sound mode can be stored for each of the

following sources — FM1, FM2, FM3, AM, CD

and external components.

• See also “Changing the general settings (PSM)”

on page 23.

2 Select the sound mode you want.

As you turn the control

dial, the sound modes

change as follows:

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

4 to select “EQ LINK”

FLAT O Hard Rock O R & B*O POP O

JAZZ O DanceMusic O Country O Reggae O

Classic O USER 1 O USER 2 O USER 3 O

(back to the beginning)

(Equalization Link).

3 Turn the control dial clockwise to select “LINK

ON.”

4 Press SEL (select) to finish the setting.

* Rhythm and Blues

To cancel EQ Link, repeat the same procedure

and select “LINK OFF” by turning the control dial

counterclockwise in step 3.

• When “EQ LINK” is set to “LINK ON”

The selected sound mode can be stored in

memory for the current source.

EQ level changes as you select the sound mode.

Ex.: When you select “POP”

Each time you change the same source, the

same sound mode is also recalled, and shown

after the source name.

• When “EQ LINK” is set to “LINK OFF”

The selected sound mode effect applies to all

the sources selected.

To cancel the sound mode, select “FLAT” in

step 2.

4 Repeat step 2 and 3 to adjust the other

Storing your own sound

adjustments

sound elements.

You can adjust the sound modes to your preference

and store your own adjustments in memory.

(USER 1, USER 2 and USER 3)

5 Select one of the user sound modes

(USER1, USER2, USER3).

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

1 Press EQ.

The last selected sound mode

is recalled, and it is applied to

the current source.

Ex.: When you select “USER 2”

Ex.: When you have selected “POP” previously

2 Press SEL (select) to select sound

6 Press EQ to store the adjustments.

elements to adjust.

Each time you press the

button, the sound elements

to adjust change as follows:

LOW FREQ.* = LOW WIDTH = LOW LEVEL =

MID FREQ.* = MID WIDTH = MID LEVEL =

To reset to the factory settings

HIGH FREQ.* = HIGH LEVEL

(back to the beginning)

Repeat the same procedure and reassign the

preset values listed in the table on page 38.

FREQ. (LOW, MID, HIGH):

Select the center frequency to adjust.

WIDTH (LOW, MID):

Select the band width level (Q).

LEVEL (LOW, MID, HIGH):

Adjust the enhancement level.

Preset values

Indication

LOW

MID

HIGH

50 Hz

80 Hz

120 Hz

700 Hz

1 kHz

2 kHz

8 kHz

12 kHz

FREQ.

WIDTH

LEVEL

* By pressing ¢

4, you can

MID FREQ.

1 (min.)

directly move as follows:

LOW FREQ.

4 (max.)

2 (max.)

–06 (min.) –06 (min.) –06 (min.)

HIGH FREQ.

3 Adjust the selected sound element.

• Refer to the table below for adjusting the

selected sound element.

+06 (max.) +06 (max.) +06 (max.)

OTHER MAIN FUNCTIONS

Changing the general settings

(PSM)

Setting the clock

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 24.)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

Basic Procedure

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 24.)

2 Set the hour.

1 Select “CLOCK HOUR” if not shown on

the display.

2 Adjust the hour.

2 Select a PSM item you want to adjust.

(See page 24.)

3 Set the minute.

1 Select “CLOCK MIN.”

2 Adjust the minute.

3 Adjust the PSM item selected.

4 Select the clock system.

1 Select “24H/12H.”

2 Select either “12HOUR” or “24HOUR.”

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Press SEL (select) to finish the setting.

To check the current clock time while the unit

is turned off, press D (display).

The power turns on, the clock time is shown for 5

seconds, then the power turns off.

Preferred Setting Mode (PSM) items

Set.

Factory-preset See

settings

page

Counter-

clockwise

Back

Clockwise

Advance

Hold.

Select.

CLOCK HOUR Hour adjustment

0:00

CLOCK MIN

EQ LINK

Minute adjustment

Back

Advance

LINK ON

24HOUR

Sound control memory

linkage

LINK OFF

24H/12H

24/12-hour time display

Automatic clock setting

Clock display

24HOUR

ADJUST ON

CLOCK ON

PS NAME

12HOUR

AUTO ADJ

CLOCK DISP

ADJUST OFF ADJUST ON

CLOCK OFF

CLOCK ON

TUNER DISP

PTY STBY

PTY SEARCH

TA VOL

Tuner display

PTY standby

PTY search

Traffic announcement

volume

FREQUENCY

PS NAME

29 program types

NEWS

(See pages 13 and 16.)

TA VOL 00 – TA VOL 50

SEARCH OFF SEARCH ON

TA VOL 20

P-SEARCH

DAB AF*

Programme search

SEARCH OFF

AF ON

Alternate frequency

AF OFF

AF ON

EQ ONLY

LEVEL+EQ

EQ ONLY

AUTO

LEVEL/EQ

DIMMER

Equalizer/Level indicator

LEVEL ONLY

AUTO

OFF

Dimmer mode

MUTING OFF

MUTING1

TELEPHONE

Telephone muting

MUTING OFF

MUTING2

BEEP SW

Key-touch tone

BEEP ON

P.AMP ON

CONTRAST 5

BEEP OFF

P.AMP OFF

BEEP ON

P.AMP ON

P.AMP SW**

CONTRAST

Power amplifier switch

Display contrast

CONTRAST 1 – CONTRAST 10

ONCE

AUTO

ONCE

SCROLL

Scroll mode

OFF

CUTOFF F**

Subwoofer cutoff

Frequency

FREQ MID

FREQ HIGH

FREQ MID

FREQ LOW

LINE ADJ**

Line input level

adjustment

L.ADJ 00

CD CHANGER

A.ADJ 00

L.ADJ 00 – L.ADJ 05

CD CHANGER LINE INPUT

A.ADJ 00 – A.ADJ 05

EXT INPUT***

AUX ADJ

External input selection

Auxiliary input level

adjustment

DVD

VCR

KEY SELECT** External key-operation

DVD

mode selection

OFF

IF FILTER

Intermediate frequency

filter

AUTO

WIDE

AUTO

DEMO ON

DEMO MODE

Demonstration mode

DEMO ON

DEMO OFF

•

Press SEL (select) to finish the setting.

Displayed only when the DAB tuner is connected.

** ONLY for KD-SH77R

***ONLY for KD-SH55R — Displayed only when one of the following sources is selected — FM, AM,

CD and AUX INPUT.

To turn on/off the power amplifier switch

– P. AMP SW. (For KD-SH77R only)

You can switch off the built-in amplifier and send

the audio signals only to the external amplifier(s)

to get clear sounds and to prevent internal heat

buildup inside this unit.

When shipped from the factory, the power

amplifier switch is turned on so that the built-in

amplifier works.

To set the clock display – CLOCK DISP

You can set the clock to be shown on the display

when the unit is turned on.

When shipped from the factory, the clock is set to

be shown on the display.

• CLOCK ON: Clock display is turned on.

• CLOCK OFF: Clock display is turned off.

To select the level meter – LEVEL/EQ

You can select the level display according to your

preference.

When shipped from the factory, this mode is set to

“EQ ONLY.”

• P. AMP ON: Select this mode when not using

external amplifier(s).

• P. AMP OFF: Select this mode when using

external amplifier(s).

• EQ ONLY:

Equalizer pattern is displayed.

To adjust the display contrast level

– CONTRAST

You can adjust the display contrast level among 1

(dark) to 10 (bright). When shipped from the

factory, the display contrast level is set at level 5.

• LEVEL+EQ: Equalizer pattern is displayed

along with audio level meter.

• LEVEL ONLY: Audio Level meter illuminates

upward and downward from

center.

To select the dimmer mode – DIMMER

When you turn on the car head lights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

To select the scroll mode – SCROLL

You can select the scroll mode for the disc

information if it consists of more than 10

characters.

When shipped from the factory, Auto Scroll mode

is set to “ONCE.”

• AUTO: Activates Auto Dimmer.

• OFF:

Cancels Auto Dimmer.

• ONCE: Scrolls only once.

• AUTO: Repeats the scroll (5-second

intervals in between).

• ON:

Always dims the display.

Note:

Auto Dimmer equipped for this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

• OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll

the display by pressing D (display) for more than 1

second.

In this case, set the dimmer mode to “ON” or “OFF.”

To select the telephone muting – TELEPHONE

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2,”

whichever mutes the sounds from this unit. When

shipped from the factory, this mode is deactivated.

To select the subwoofer cutoff frequency

– CUTOFF F (For KD-SH77R only)

When a subwoofer is connected to this unit,

select an appropriate cutoff frequency level for

your subwoofer.

• MUTING 1:

Select this if this setting can

mute the sounds.

When shipped from the factory, the subwoofer

cutoff frequency is set to “FREQ MID.”

• MUTING 2:

Select this if this setting can

mute the sounds.

• FREQ LOW: Frequencies higher than 50 Hz

are cut off to the subwoofer.

• MUTING OFF: Cancels the telephone muting.

• FREQ MID: Frequencies higher than 80 Hz

are cut off to the subwoofer.

• FREQ HIGH: Frequencies higher than 120 Hz

are cut off to the subwoofer.

To turn on/off the key-touch tone – BEEP SW

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch tone

is activated.

• BEEP ON: Activates the key-touch tone.

• BEEP OFF: Deactivates the key-touch tone.

To adjust the line input level – LINE ADJ

(For KD-SH77R only)

To select the target component to operate

through this receiver

Adjust the line input level properly when an

external component is connected to the LINE IN

plugs.

When shipped from the factory, the line input level

is set at level 00.

If the input level of the connected component is

not high enough, increase the input level properly.

Without adjusting the line input level, you may be

surprised at a loud sound when you change the

source from the external component to another

source.

– KEY SELECT (For KD-SH77R only)

You can operate either JVC’s VCR or DVD player

through this receiver, by using the number buttons

on the control panel.

When shipped from the factory, these number

buttons are set to be used for the DVD operations.

To use these number buttons on the control panel

for DVD or VCR operations, see page 30.

To change the FM tuner selectivity

– IF FILTER

To select the external component to use

– EXT INPUT (For KD-SH55R only)

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adaptor KS-U57 (not supplied).

To use the external component as the playback

source through this unit, you need to select which

component – CD changer or external component

– to use.

When shipped from the factory, CD changer is

selected as the external component.

In some areas, adjacent stations may interfere

with each other. If this interference occurs, noise

may be heard. This unit has been preset to

automatically reduce this interference noise

(“AUTO”) when shipped from the factory.

• AUTO:

When this type of interference

occurs, this unit automatically

increases the tuner selectivity so

that interference noise will be

reduced. (But the stereo effect will

also be lost.)

• WIDE:

Subject to the interference from

adjacent stations, but sound

quality will not be degraded and

the stereo effect will not be lost.

• LINE INPUT:

To use the external component

other than CD changer.

• CD CHANGER: To use the CD changer.

Note:

To turn the demo mode on or off

– DEMO MODE

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/

Connection Manual (separate volume).

You can turn the demo mode on or off. When

shipped from the factory, “DEMO ON” is selected.

To adjust the auxiliary input level

– AUX ADJ

Adjust the auxiliary input level properly when an

external component is connected to the auxiliary

input jack.

• DEMO ON: Turns the demo mode on. The

demonstration will start

automatically if no sound comes

in for 3 minutes.

• DEMO OFF: Turns the demo mode off.

When shipped from the factory, the auxiliary input

level is set at level 00.

Note:

If the unit has been reset (and the power is on),

demonstration will start if no sound comes in for about

10 seconds.

If the input level of the connected component is

not high enough, increase the input level properly.

Without adjusting the line input level, you may be

surprised at a loud sound when you change the

source from the external component to another

source.

Assigning names to the sources 3 Select the character set you want while

“

” is flashing.

You can assign names to CDs and the external

components.

After assigning a name, it will appear on the

display when you select the source.

Each time you press the

button, the character set

changes as follows:

Small letters (

)

Capital letters (

)

Sources

Maximum number of

the characters

Numbers and symbols (

)

CDs *

up to 32 characters

(up to 40 discs)

4 Select a character.

About the available characters,

see page 38.

External components up to 10 characters

* You cannot assign a name to a CD Text.

1 Select a source you want to assign a

name to.

When you select a source,

the power automatically

comes on.

5 Move the cursor to the next

(or previous) character position.

Each time you press the

button, the source changes

as described on page 7.

6 Repeat steps 3 to 5 until you finish

2 Press and hold SEL (select) for more

than 2 seconds while pressing D

(display).

inputting the name.

7 Finish the procedure while the last

selected character is flashing.

To erase the input characters

Insert spaces using the same procedure

described above.

Ex.: When you select “CD PLAY” as the source

Notes:

• When you try to assign a name to the 41st disc, “NAME

FULL” appears on the display. (In this case, delete

unwanted names before assignment.)

• When the CD changer is connected, you can assign

names to CDs in the CD changer. These names can

also be shown on the display if you insert the CDs in

this unit.

Changing the control panel

angle

CAUTION:

NEVER insert your finger

between the control panel

and the unit, as it may get

caught and hurt.

You can change the angle of the control panel in

three positions.

Adjust the angle to the position you want.

Each time you press the button,

the panel angle changes as

follows:

When using the remote controller

Press ANGLE ∞ repeatedly. Each time you press the button, the control panel changes its angle — Å,

ı, Ç, then Î positions in sequence.

To restore the control panel to the original position,

press ANGLE 5. Each time you press the button, the control panel reverses its angle — Î, Ç, ı,

then Å positions in sequence.

Attaching the control panel

Detaching the control panel

1 Insert the left side of the control panel

You can detach the control panel when leaving

the car.

into the groove on the panel holder.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

2 Press the right side of the control

panel to fix it to the panel holder.

1 Unlock the control panel.

The control panel

comes out toward you.

2 Move the control panel to the right,

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

then pull it out of the unit.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

3 Put the detached control panel into the

provided case.

Connectors

EXTERNAL COMPONENT OPERATIONS

MD player, etc.

auxiliary input

Playing external components

1 Select the external component (AUX

INPUT or LINE INPUT).

When you select a source,

the power automatically

For KD-SH77R:

You can connect two external components to this

unit.

Connect one to the auxiliary input jack on the

control panel, and the other to the LINE IN plugs

on the rear.

comes on.

Each time you press the

button, the source changes

as described on page 7.

If you connect a JVC’s VCR or DVD player

to the LINE IN plugs

You can operate it through this receiver using

the number buttons on the control panel.

When you operate the VCR, you have to

change the operation mode of the number

buttons from the DVD operation mode to the

VCR operation mode. (See “To select the

target component to operate through this

receiver – KEY SELECT” on page 26.)

AUX INPUT: To select the component

connected to the auxiliary

input jack on the control

panel

LINE INPUT: To select the component

connected to the LINE IN

plug

If the input level of the external

components is not high enough, increase

the input level properly.

Without adjusting the input level, you may be

surprised at a loud sound when you change

the source from the external components to

another. (See “To adjust the line input level –

LINE ADJ” and “To adjust the auxiliary input

level – AUX ADJ” on page 26.)

2 Turn on the connected component

and start playing the source.

• If connecting a JVC’s DVD player or VCR,

you can perform the following operations.

When connecting a DVD player:

1 Select the external component (AUX

Turns on and off the power.

Starts playback.

INPUT or LINE INPUT).

¡:

When you select a

source, the power

automatically comes on.

Each time you press the

button, the source

changes as described on

page 7.

• Fast-forward the track when pressed and

held.

• Skip to the beginning of the next tracks

when pressed briefly.

• Reverses the track when pressed and

held.

• Go back to the beginning of the current

track when pressed briefly.

Go back to the beginning of the previous

tracks when pressed consecutively.

Stops operations.

AUX INPUT: To select the component

connected to the auxiliary

input jack on the control

panel

Note:

When you press the above buttons, the display shows

“DVD” and its operation mode (such as

3, 7 ).

When connecting a VCR:

LINE INPUT: To select the component

connected to the CD changer

jack

Turns on and off the power.

Starts playback.

¡:

Fast-winds a tape when pressed and held.

Rewinds a tape when pressed and held.

Stops operations.

• If “LINE INPUT” cannot be selected, see

page 26 and select the external input (“LINE

INPUT”).This cannot be used together with

the CD changer.

Note:

When you press the above buttons, the display shows

“VCR” and its operation mode (such as

2 Turn on the connected component

For KD-SH55R:

and start playing the source.

You can connect two external components to this

unit.

Connect one to the auxiliary input jack on the

control panel, and the other to the CD changer

jack on the rear.

Before operating the external component

connected to the CD changer jack, select

the external input correctly. (See “To select

the external component to use – EXT INPUT”

on page 26.)

If the input level of the external component

connected to the auxiliary input jack is not

high enough, increase the input level

properly.

Without adjusting the input level, you may be

surprised at a loud sound when you change

the source from the external component to

another. (See “To adjust the auxiliary input

level – AUX ADJ” on page 26.)

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series

with your unit.

To fast-forward or reverse the track

If you have another CD automatic changer, consult

your JVC IN-CAR ENTERTAINMENT for

connections.

Press and hold ¢

while playing a CD, to

fast-forward the track.

• For example, if your CD automatic changer is one of

the KD-MK series, you need a cord (KS-U15K) for

connecting it to this unit.

Press and hold

while playing a CD, to

reverse the track.

Before operating your CD automatic changer:

• Refer also to the Instructions supplied with your

CD changer.

To go to the next track or the previous tracks

• If no discs are in the magazine of the CD

changer or the discs are inserted upside down,

“NO DISC” will appear on the display. If this

happens, remove the magazine and set the

discs correctly.

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer.If this happens, check the connection

and make sure the cords are connected firmly.

Then, press the reset button of the CD

changer.

Press ¢

briefly, while

playing a CD, to go ahead to

the beginning of the next

track. Each time you press

the button consecutively, the

beginning of the next track is

located and played back.

Press

4 briefly, while

playing a CD, to go back to

the beginning of the current

track. Each time you press

the button consecutively, the

beginning of the previous

tracks is located and played

back.

Playing CDs

Select the CD automatic changer

(CD CHANGER).

When you select a source,

the power automatically

comes on.

Each time you press the

button, the source changes

as described on page 7.

Disc number

Elapsed playing time

Track number

To go to a particular disc directly

To play back tracks repeatedly (Repeat Play)

Press the number button corresponding to the disc

number to start its playback (while the CD changer

is playing).

1 Press M/B (mode/band) while

playing a CD.This unit enters the

functions mode.

2 Press RPT (repeat), while still

in the functions mode, so that

the RPT indicator lights up on

the display.

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Then, each time you press

RPT, the repeat play mode

changes as follows:

REPEAT1

REPEAT2

Canceled

Disc number

Plays repeatedly

Mode

RPT

Indicator

REPEAT1 Lights

The current track (or

specified track).

Track number

Elapsed playing time

REPEAT2 Flashes

All tracks of the current

disc (or specified disc).

Ex.: When disc number 3 is selected

Selecting CD playback modes

To play back tracks repeatedly (Intro scan)

1 Press M/B (mode/band) while

playing a CD. This unit enters

the functions mode.

2 Press INT (intro scan), while still

in the functions mode, so that

“INTRO” appears on the display.

Then, each time you press INT,

To play back tracks at random (Random Play)

1 Press M/B (mode/band) while

playing a CD. This unit enters

the functions mode.

2 Press RND (random), while still

in the functions mode, so that

the RND indicator lights up on

the display.

the intro scan mode changes as

follows:

Then, each time you press

RND, the random play mode

changes as follows:

INTRO1

INTRO2

Canceled

Indicator

Mode

Plays the beginnings

(15 seconds)

RANDOM1

RANDOM2

Canceled

INTRO1

INTRO2

Of all tracks on all

inserted disc.

Track number

flashes

Mode

Plays at random

RND

Of the first track on each

inserted disc.

Disc number

flashes

Indicator

RANDOM1 Lights

All tracks of the current

disc, then the tracks of

the next disc and so on.

RANDOM2 Flashes All tracks of all discs

inserted in the magazine.

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio

Tuning into an ensemble and

one of the services

Broadcasting) tuner KT-DB1500 with your unit.

If you have another DAB tuner, consult your JVC

IN-CAR ENTERTAINMENT dealer.

• Refer also to the Instructions supplied with your

DAB tuner.

A typical ensemble has 6 or more programmes

(services) broadcast at the same time.After tuning

into an ensemble, you can select a service you

want to listen to.

What is DAB system?

DAB is one of the digital radio broadcasting

systems available today.It can deliver CD quality

sound without any annoying interference and

signal distortion. Furthermore, it can carry text,

pictures and data.

In contrast to FM broadcast, where each

programme is transmitted on its own frequency,

DAB combines several programmes (called

“services”) to form one “ensemble.”

1 Select the DAB tuner.

When you select a

source,

the power automatically

comes on.

Each time you press the

button, the source

changes as described on

page 7.

With the DAB tuner connected with this unit,

you can enjoy these DAB services.

2 Select the DAB band (DAB1, DAB2,

or DAB3).

Each time you press and

hold the button for more

than 1 second, the DAB

band changes as follows:

D 1

D 2

D 3

(DAB 1)

(DAB 2)

(DAB 3)

Note:

This receiver has three DAB bands (DAB 1, DAB

2, DAB 3). You can use any of them to tune into an

ensemble.

To change the display information while

tuning into an ensemble

3 Start searching an ensemble.

Press ¢

Normally service name is shown on the display.

If you want to change the display information,

press D (display).

search ensembles of

higher frequencies.

Each time you press the button, the following

information appears on the display for a while.

Press

ensembles of lower

frequencies.

4 to search

Service name

When an ensemble is received, searching

stops.

Ensemble name

Channel number

Frequency

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

4 Select a service you want to listen to.

1 Press M/B (mode/band).

To tune into a particular ensemble without

searching:

W ith in

5 se co n d s

1 Press SOURCE to select DAB tuner as the

source.

2 Press and hold M/B (mode/band) for more than

1 second repeatedly to select the DAB band

(DAB 1, DAB 2 or DAB 3).

2 Press ¢

4 to select a service

you want.

3 Press and hold ¢

4 for more

than 1 second. “MANUAL” flashed on the

display.

4 Press ¢

4 repeatedly until the

ensemble you want is reached.

• If you hold down the button, the ensembles

keep changing until you release the button.

Storing DAB services in

memory

5 Press and hold the number button

(in this example, 1) you want to

store the selected service into for

more than 2 seconds.

You can preset up to 6 DAB services in each

DAB band (DAB1, DAB2 and DAB3) manually.

1 Select the DAB tuner.

When you select a

source,

the power automatically

comes on.

“P 1” flashes for a while.

Each time you press the

button, the source

changes as described on

page 7.

2 Select the DAB band (DAB 1, DAB 2

or DAB 3) you want.

6 Repeat the above procedure to store

other DAB services into other preset

numbers.

Each time you press and

hold the button for more

than 1 second, the DAB

band changes as follows:

Notes:

• A previously preset DAB service is erased when a new

DAB service is stored in the same preset number.

• Preset DAB services are erased when the power supply

to the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset the

DAB services again.

D 1

D 2

D 3

(DAB 1)

(DAB 2)

(DAB 3)

3 Tune into an ensemble you want.

4 Select a service of the ensemble you

want.

1 Press M/B (mode/band).

W ith in

5 se co n d s

2 Press and hold ¢

4to select a

service you want.

Tuning into a preset DAB

service

What you can do more with DAB

Tracing the same program automatically

(Alternative Reception)

You can easily tune into a preset DAB service.

Remember that you must store services first. If

you have not stored them yet, see page 36.

You can keep listening to the same program.

• While receiving a DAB service:

When driving in an area where a service cannot

be received, this unit automatically tunes in

another ensemble or FM RDS station,

broadcasting the same program.

• While receiving an FM RDS station:

When driving in an area where a DAB service is

broadcasting the same program as the FM RDS

station is broadcasting, this unit automatically

tunes into the DAB service.

1 Select the DAB tuner.

When you select a source,

the power automatically

comes on.

Each time you press the

button, the source

changes as described on

page 7.

Note:

2 Select the DAB band (DAB1, DAB2

or DAB3) you want.

When reception switches between DAB and FM, the

listening volume level may increase or decrease

inconveniently. This change in the volume level results

from unequal audio injection levels at broadcaster site,

but not from the malfunction of this unit.

Each time you press and

hold the button for more

than 1 second, the DAB

band changes as follows:

D 1

D 2

D 3

To use Alternative Reception

(DAB 1)

(DAB 2)

(DAB 3)

When shipped from the factory, Alternative

Reception is activated.

• See also “changing the general settings (PSM)”

on page 23.

3 Select the number (1 – 6) for the

preset DAB service you want.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press

(alternative frequency).

¢ or

4to select “DAB AF”

3 Turn the control dial to select the desired mode.

• AF ON: Traces the program among DAB

services and FM RDS stations

— Alternative Reception. The AF

indicator lights up on the display

(see page 11).

• AF OFF:Deactivates Alternative Reception.

Note:

When Alternative Reception (for DAB services) is

activated, Network-Tracking Reception (for RDS

stations: see page 11) is also activated automatically.

On the other hand, Network-Tracking Reception

cannot be deactivated without deactivating

Alternative Reception.

4 Press SEL (select) to finish the setting.

ADDITIONAL INFORMATION

So u n d m o d e s (p re se t va lu e se ttin g s)

The list below is the preset value settings for each sound mode.

Once you have changed their settings, you can reset to the factory settings by reassigning the

preset values below. (See page 22 to reassignment procedure.)

Indication

Preset equalizing values

FREQ.

50 Hz

80 Hz

120 Hz

80 Hz

50 Hz

80 Hz

120 Hz

50 Hz

WIDTH

LOW LEVEL

FREQ.

700 Hz

2 kHz

WIDTH

MID LEVEL

FREQ.

8 kHz

12 kHz

8 kHz

12 kHz

8 kHz

HIGH LEVEL

FLAT

Hard Rock

R & B

+03

+02

+03

+04

+02

+03

+02

+03

+02

+03

+01

+02

+01

–02

POP

2 kHz

JAZZ

1 kHz

DanceMusic

Country

Reggae

Classic

User 1

User 2

User 3

700 Hz

2 kHz

+02

1 kHz

700 Hz

Ava ila b le ch a ra cte rs

You can use the following characters to assign names to CDs and external components.

(See page 27.)

Small letters

Numbers and symbols

Capital letters

”

(

)

’

–

space

;

space

MAINTENANCE

Handling CDs

CAUTIONS:

•

Do not insert 8cm (3 3/16") CDs (single CDs) into

the loading slot. (Such CDs cannot be ejected.)

Do not insert any CD of unusual shape — like a

heart or flower; otherwise, it will cause a

malfunction.

This unit has been designed to reproduce the

CDs bearing the following marks.

COMPACT

•

DIGITAL AUDIO

•

Do not expose CDs to direct sunlight or any heat

source or place them in a place subject to high

temperature and humidity. Do not leave them in a

car.

Do not use any solvent (for example, conventional

record cleaner, spray, thinner, benzine, etc.) to

clean CDs.

You can also play back your original CD-Rs

(Recordable) and CD-RWs (Rewritable) on this

receiver.

This unit is not compatible with MP3.

How to handle CDs

When removing a CD from its

case, press down the center

Center holder

holder of the case and lift the

CD out, holding it by the edges.

• Always hold the CD by the edges.

Do not touch its recording surface.

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs

(Rewritable) can be played back only if they are

already “finalized.”

When storing a CD into its case, gently insert

the CD around the center holder (with the printed

surface facing up).

• Make sure to store CDs into the cases after

use.

•

You can play back your original CD-Rs or CD-

RWs recorded in music CD format. (However,

they may not be played back depending on their

characteristics or recording conditions.)

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

Some CD-Rs or CD-RWs may not be played

back on this unit because of their disc

characteristics, damage or stain on them, or if

the player’s lens is dirty.

•

To keep CDs clean

A dirty CD may not play

correctly. If a CD does become

dirty, wipe it with a soft cloth in

a straight line from center to

edge.

•

CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity; so do not leave

them inside your car.

CD-RWs may require a longer readout time.

(This is caused by the fact that the reflectance

of CD-RWs is lower than for regular CDs.)

To play new CDs

New CDs may have some

rough spots around the inner

and outer edges. If such a CD

is used, this unit may reject the

CD.

About mistracking:

To remove these rough spots, rub the edges with

a pencil or ball-point pen, etc.

Mistracking may result from driving on

extremely rough roads. This does not damage

the unit and the CD, but will be annoying.

We recommend that you stop CD play while

driving on such rough roads.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the CD and

leave the unit turned on for a few hours until

the moisture evaporates.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• CD cannot be played back.

CD is inserted upside down.

Insert the CD correctly.

• CD sound is sometimes

interrupted.

You are driving on rough roads.

Stop CD play while driving on

rough roads.

CD is scratched.

Change the CD.

Connections are incorrect.

Check the cords and

connections.

• Sound cannot be heard from

the speakers.

The volume level is set to the

minimum level.

Adjust it to the optimum level.

Connections are incorrect.

Signals are too weak.

Check the cords and

connections.

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Store stations manually.

• Static noise while listening to

the radio.

The antenna is not connected

firmly.

Connect the antenna firmly.

Insert CD.

• “NO DISC” appears on the

display.

No CD is in the magazine.

• “RESET 8” appears on the

display.

This unit is not connected to a

CD changer correctly.

Connect this unit and the CD

changer correctly and press the

reset button of the CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• “NO DISC” or “EJECT ERR”

appears on the display and

CD cannot be ejected.

The CD player may function

incorrectly.

While pressing

, press and

hold 0 for more than 2 seconds.

(Be careful not to drop the CD

when ejecting.)

• No message appears on the

display but CD cannot be

ejected.

The built-in microcomputer may

function incorrectly due to noise,

etc.

• This unit does not work at all.

• The CD changer does not

work at all.

Press the reset button on the

control panel. (See page 2.)

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

CD PLAYER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

98 dB

Signal-to-Noise Ratio: 102 dB

Wow and Flutter: Less than measurable limit

Rear:

GENERAL

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Equalizer Control Range:

Power Requirement:

LOW: ±12 dB (50 Hz, 80 Hz, 120 Hz)

MID: ±12 dB (700 Hz, 1 kHz, 2 kHz)

HIGH: ±12 dB (8 kHz, 12 kHz)

Operating Voltage: DC 14.4 V

(11 V to16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 161 mm

Panel Size: 188 mm × 58 mm × 17 mm

Mass: 1.8 kg (excluding accessories)

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance:

KD-SH77R : 1.5 V/20 kΩ load

Line-Out Level/Impedance:

KD-SH55R : 2.0 V/20 kΩ load (full scale)

KD-SH77R : 4.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

auxiliary input jack : (3.5 mm dia. stereo mini jack)

Design and specifications subject to change without

notice.

TUNER SECTION

Frequency Range:

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

VICTOR COMPANY OF JAPAN, LIMITED

EN, GE, FR, NL

0201MNMMDWJES

KD-SH77R/KD-SH55R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

0201MNMMDWJES

EN, GE, FR, NL

LVT0629-001A

[E/EX]

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V

• Dieses Gerät ist für einen Betrieb in elektrischen • Cet appareil est conçu pour fonctionner sur des • Dit apparaat mag worden gebruikt bij elektrische

DC, NEGATIVE ground electrical systems.

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

sources de courant continu de 12 V à masse

NEGATIVE.

systemen die werken op 12 V gelijkstroom met

negatieve aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical

installation. However, you should make

adjustments corresponding to your specific

car. If you have any questions or require

information regarding installation kits,

consult your JVC IN-CAR ENTERTAINMENT

dealer or a company supplying kits.

• Die folgende Abbildung zeigt einen typischen • L’illustration suivante est un exemple • Op de volgende afbeelding kunt u zien hoe de

Einbau. Dennoch müssen Sie entsprechend

Ihrem jeweiligen Auto Anpassungen

vornehmen. Bei irgendwelchen Fragen oder

wenn Sie Informationen hinsichtlich des

Einbausatzes brauchen, wenden Sie sich an

ihren JVC Autoradiohändler oder ein

Unternehmen das diese Einbausätze vertreibt.

d’installation typique. Cependant, vous devez

faire les ajustements correspondant à votre

voiture particulière. Si vous avez des questions

ou avez besoin d’information sur des kits

d’installation, consulter votre revendeur

d’autoradios JVC ou une compagnie

d’approvisionnement.

installatie, normaal gesproken, in zijn werk gaat. U

moet echter bij de installatie rekening houden met

de bijzonderheden van uw eigen auto. Neem bij

vragen of voor meer bijzonderheden over

inbouwpakketten contact op met uw JVC car audio

dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

1 Vor dem Einbau: Drücken Sie

(Schalttafel-Freigabetaste), um die Arretierung

der Schalttafel zu lösen, sofern diese bereits

angebracht ist.

1 Before mounting: Press

(Control

1 Avant le montage: Appuyer sur

(déblocage du panneau de commande) pour

éventeullement détacher le panneau de

commande.

1 Voordat u aan de montage van het apparaat

Panel Release button) to detach the control

begint: Druk op

(het bedieningspaneel

panel if already attached.

vrijgeven) als u het bedieningspaneel wilt

loskoppelen indien dit aan de eenheid is

vastgekoppeld.

* When shipped from the factory, the control

panel is packed in the hard case.

* Bei der Auslieferung ab Werk ist die

Schalttafel im Etui verpackt.

* Lorsque ce panneau de commande sort

d’usine, il est rangé dans un étui de transport.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpakt meegeleverd.

2 Remove the trim plate.

2 Den Frontrahmen herausnehmen.

2 Retirer la plaque d’assemblage.

3 Remove the sleeve after disengaging the

Die Halterung nach dem Entriegeln der

Halterungensperren abnehmen.

2 Verwijder de sierplaat.

3 Libérer les verrous du manchon et retirer le

sleeve locks.

manchon.

3 Verwijder het huis nadat u de klemmen hebt

1 Stand the unit.

1 Poser l’appareil à la verticale.

1 Das Gerät aufstellen.

losgemaakt.

Remarque: Lorsque vous mettez l’appareil

à la verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

Hinweis: Beim Aufstellen des Geräts

darauf achten, daß die Sicherung auf der

Rückseite nicht beschädigt wird.

Note:When you stand the unit, be careful

not to damage the fuse on the rear.

1 Zet het apparaat rechtop.

Opmerking:Wanneer u het apparaat rechtop

zet, moet u erop letten dat u de zekering aan

de achterkant niet beschadigt.

2 Insert the 2 handles between the unit and

the sleeve, as illustrated, to disengage the

sleeve locks.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé

les verrous de manchon.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und

die Halterungensperren entriegeln.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Remove the sleeve.

3 Retirer le manchon.

3 Die Halterung entfernen.

Note: Be sure to keep the handles for

future use after installing the unit.

Remarque: S’assurer de garder les

poignées pour une utilisation ultérieur,

après l’installation de l’appareil.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

3 Verwijder het huis.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in

de toekomst kunt gebruiken.

4 Install the sleeve into the dashboard.

^{* After the sleeve is correctly installed into}4 Die Halterung im Armaturenbrett einbauen.

4 Installer le manchon dans le tableau de bord.

the dashboard, bend the appropriate tabs

to hold the sleeve firmly in place, as

illustrated.

* Nach dem korrekten Einbau der Halterung

im Armaturenbrett, die entsprechenden

Riegel umknicken, um die Halterung an

ihrem Platz zu sichern, siehe Abbildung.

* Après installation correcte du manchon dans

le tableau de bord, plier les bonnes pattes

pour maintenir fermement le manchon en

place, comme montré.

4 Installeer het huis in het dashboard.

* Nadat het huis op de juiste wijze in het dashboard

is geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Fix the mounting bolt to the rear of the unit’s

^{body and place the rubber cushion over the}5 Die Befestigungsschraube an der Rückseite

5 Monter le boulon de montage sur l’arrière du

corps de l’appareil puis passer l’amortisseur

en caoutchouc sur l’extrémité du boulon.

5 Maak de bevestigingsbout aan de achterkant van

het apparaat vast en plaats de rubberdop over het

uiteinde van de bout.

des Gerätekörpers befestigen und das Ende

der Schraube mit einem Gummipuffer

abdecken.

end of the bolt.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

6 Réalisez les connexions électriques.

6 Breng de vereiste elektrische verbindingen tot stand.

6 Nehmen Sie die erforderlichen elektrischen

7 Faire glisser l’appareil dans le manchon jusqu’à

7 Schuif het apparaat in het huis totdat het

Anschlüsse vor.

ce qu’il soit verrouillé.

vergrendeld is.

9 Attach the control panel.

7 Das Gerät in die Halterung schieben, bis es

8 Attachez la plaque d’assemblage.

9 Remonter le panneau de commande.

8 Bevestig de sierplaat.

9 Bevestig het bedieningspaneel.

einrastet.

8 Befestigen Sie die Frontrahmen.

9 Die Schalttafel anbringen.

Handle

Griff

Poignée

Hendel

Lock Plate

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Dashboard

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Armaturenbrett

Tableau de bord

Dashboard

Slot

Schlitz

Fente

Sleuf

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

184 mm

(7-1/4")

Sleeve

Halterung

Manchon

Huis

Fuse

53 mm

(2-1/8")

Sicherung

Fusible

Zekering

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Sleeve

Halterung

Manchon

Huis

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Control panel

Trim plate

Schalttafel

Frontrahmen

Plaque d’assemblage

Sierplaat

Zie “ELEKTRISCHE VERBINDINGEN”.

Panneau de commande

Bedieningspaneel

•When installing the unit without using the sleeve

•Beim Einbau des Geräts ohne Halterung

•Lors de l’installation de l’appareil scans utiliser de manchon

•Wanneer u het apparaat zonder huis installeert

In a Toyota for example, first remove the car radio and install the unit in its place.

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

•When using the optional stay

•Beim Verwenden der Anker-Option

•Lors de l’utilisation du hauban en option

•Wanneer u de steun gebruikt (facultatief)

Stay (option)

Washer

Anker (Option)

Hauban (en option)

Steun (facultatief)

Unterlegscheibe

Rondelle

Sluitring

Fire wall

Feuerwand

Cloison

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Brandscherm

* Not included with this unit.

* Nicht Teil dieses Geräts.

Platkopschroeven (M5 x 6 mm)*

Lock nut

Dashboard

* Non fourni avec cet appareil.

* Niet meegeleverd.

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

Armaturenbrett

Tableau de bord

Dashboard

Bracket*

Konsole*

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Support*

Console*

Screw (option)

Schraube (Option)

Vis (en option)

Pocket

Schroef (facultatief)

Bracket*

Konsole*

Support*

Console*

Taschen

Poche

Zak

Mounting bolt

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Sleeve

Halterung

Manchon

Huis

Note:When installing the unit on the mounting brackets, make sure to use the 6 mm-long screws.

If longer screws are used, they could damage the unit.

Hinweis: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben

verwendet werden. Werden längere Schrauben verwendet, können sie das Gerät beschädigen.

Remarque: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des

vis d’une longueur de 6 mm.

Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking:Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven

gebruiken. Als u langere schroeven gebruikt, kan het apparaat worden beschadigd.

Verwijderen van het apparaat

Retrait de l’appareil

Removing the unit

• Before removing the unit, release the rear

section.

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

freigeben.

• Voordat u het apparaat verwijdert, moet u het

• Avant de retirer l’appareil, libérer la section arrière.

achtergedeelte losmaken.

1 Retirer le panneau de commande.

2 Retirer la plaque d’assemblage.

1 Remove the control panel.

2 Remove the trim plate.

3 Insert the 2 handles into the slots, as

shown. Then, while gently pulling the

handles away from each other, slide out

the unit. (Be sure to keep the handles after

installing it.)

1 Verwijder het bedieningspaneel.

2 Verwijder de sierplaat.

1 Den Schalttafel abnehmen.

2 Den Frontrahmen herausnehmen.

3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

3 Introduire les 2 poignées dans les fentes,

3 Plaatsde2hendels, zoalsafgebeeld, indesleuven. Daarna

comme montré.Puis, tout en tirant doucement

duwtudehendelszachtjesuitelkaarenkuntuhetapparaat

les poignées écartées, faire glisser l’appareil

pour le sortir. (S’assurer de conserver les

naar buiten schuiven. (Bewaar de hendels nadat u

het apparaat hebt geïnstalleerd!)

poignées après l’installation de l’appareil.)

Trim plate

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Handle

Griff

Poignée

Frontrahmen

Plaque d’assemblage

Sierplaat

Hendel

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

Teileliste für den Einbau und Anschluß

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert.

Parts list for installation and connection

The following parts are provided for this unit.

After checking them, please set them correctly.

raccordement

installatie en aansluiting nodig hebt

Les pièces suivantes sont fournies avec cet appareil. De volgende onderdelen worden bij het apparaat geleverd.

Après vérification, veuillez les placer correctement. Installeerzeopdejuistewijze, nadatuzehebtgecontroleerd.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Remote controller

Fernbedienung

Télécommande

Afstandsbediening

Battery

Batterie

Pile

ANGLE

Batterij

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau de commande

Sleeve

Trim plate

AUX

SEL

VOLUME

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

AM-RK100

CR2025

Behuizing/Bedieningspaneel

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Handles

Griffe

Poignées

Washer (ø5)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Unterlegscheibe(ø5)

Rondelle (ø5)

Sluitring (ø5)

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

Hendels

ELEKTRISCHE VERBINDINGEN

ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES

Om kortsluiting te voorkomen adviseren wij u om de

minpool van de accu los te maken en alle elektrische

verbindingen tot stand te brengen voordat u het apparaat

in de auto installeert. Als u niet zeker weet hoe u dit

apparaat moet installeren, kunt u dit beter door een

daartoe gekwalificeerde technicus laten doen.

To prevent short circuits, we recommend that Zur Vermeidung von Kurzschlüssen empfehlen Pour éviter tout court-circuit, nous vous

you disconnect the battery’s negative wir, daß Sie den negativen Batterieanschluß recommandons de débrancher la borne négative

terminal and make all electrical connections abtrennen und alle elektrischen Anschlüsse de la batterie et d’effectuer tous les raccordements

before installing the unit. If you are not sure herstellen, bevor das Gerät eingebaut wird. Sind électriques avant d’installer l’appareil.Si l’on n’est

how to install this unit correctly, have it Sie sich über den richtigen Einbau des Geräts pas sûr de pouvoir installer correctement cet

installed by a qualified technician.

nicht sicher, lassen Sie es von einem appareil, le faire installer par un technicien qualifié.

qualifizierten Techniker einbauen.

Remarque:

Hinweis:

Note:

Opmerking:

Cet appareil est conçu pour fonctionner sur des

This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems. If your

vehicle does not have this system, a voltage

inverter is required, which can be purchased

at JVC IN-CAR ENTERTAINMENT dealers.

Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met

negatieve aarding. Als uw auto niet is uitgerust met

een dergelijk systeem, is een spanningsomzetter vereist.

Dit instrument kan worden aangeschaft bij JVC car

audio dealers.

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak

doorslaat, moet u uw JVC car audio dealer

raadplegen.

Dieses Gerät ist für einen Betrieb in

elektrischen Anlagen mit 12 V Gleichstrom

und (–) Erdung ausgelegt. Verfügt Ihr Fahrzeug

nicht über diese Anlage, ist ein

Spannungsinverter erforderlich, der bei JVC

Autoradiohändler erworben werden kann.

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un

revendeur d’autoradios JVC.

• Replace the fuse with one of the specified

rating. If the fuse blows frequently, consult

your JVC IN-CAR ENTERTAINMENT dealer.

• If noise is a problem...

• Remplacer le fusible par un de la valeur précisée.

Si le fusible saute souvent, consulter votre

revendeur d’autoradios JVC.

• Si le bruit est un problème...

Cet appareil incorpore un filtre de bruit dans le

circuit d’alimentation. Cependant, avec certains

véhicules, quelques claquements ou autres

bruits non désirés risquent de se produire. Si

cela arrive, raccorder la borne arrière de masse

de l’appareil au châssis de la voiture (voir le

diagramme de raccordement) en utiliscant des

cordons les plus gros et les plus courts possibles

telle qu’une barre de cuivre ou une tresse. Si le

bruit persiste, consulter votre revendeur

d’autoradios JVC.

• La puisscance admissible des enceintes devrait

n’être pas plus qu’ c 50 W à l’arrière et à 50 W

a l’avant, avec une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse

de cet appareil au châssis de la voiture.

• Le dissipateur de chaleur devient très chaud

après usage.Faire attention de ne pas le toucher

en retirant cet appareil.

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung

häufig durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Sind Störgeräusche ein Problem...

Dieses Gerät enthält ein Störfilter im

Stromkreis. Bei manchen Fahrzeugen kann

jedoch ein Klicken oder andere unerwünschte

Störgeräusche auftreten. Sollte das der Fall

sein, die hintere Erdungscanschlußklemme

(siehe Schaltplan) des Geräts am Fahrwerk

des Fahrzeugs anschließen, dabei kürzere und

dickere Kabel wie beispielsweise

Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen,

wenden Sie sich an Ihren JVC

Autoradiohändler.

• Maximale Eingangsleistung der Lautsprecher

sollte nicht mehr als 50 W hinten und 50 W

vorne sein, mit einer Impedanz von

4 Ω bis 8 Ω.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

This unit incorporates a noise filter in the

power circuit. However, with some vehicles,

clicking or other unwanted noise may

occur. If this happens, connect the unit’s

rear ground terminal (see connection

diagram) to the car’s chassis using shorter

and thicker cords, such as copper braiding

or gauge wire. If noise still persists, consult

your JVC IN-CAR ENTERTAINMENT dealer.

• Maximum input of the speakers should be

no more than 50 W at the rear and 50 W at

the front, with an impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s

chassis.

• Als u geluidsproblemen hebt…

De krachtschakeling van dit apparaat heeft een

ingebouwd geluidsfilter. In sommige voertuigen zijn

tikgeluiden of andere ongewenste geluiden te horen.

Als dit gebeurt, moet u de massaklem aan de

achterkant (zie aansluitingsschema) aan het chassis

van de auto vastmaken met behulp van een kortere

en dikkere kabel, zoals kopermanteldraad of

tellerkabel. Als het geluid niet verdwijnt, moet u

contact opnemen met uw JVC car audio dealer.

• Het maximum ingangsvermogen van de speakers

moet achterin niet meer dan 50 W zijn en voorin

50 W, met een impedantie van 4 Ω tot 8 Ω.

• Zorg ervoor dat dit apparaat door middel van

een aardkabel is verbonden met het chassis

van de auto.

• The heat sink becomes very hot after use.

Be careful not to touch it when removing

this unit.

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit

apparaat van zijn plaats haalt.

• Das Abstrahlblech wird nach dem Gebrauch

sehr heiß. Beim Ausbau des Geräts darauf

achten, das Abstrahlblech nicht zu berühren.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen

verdrehen.

Torsader les âmes des fils en les

raccordant.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating

tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT

VERWENDETEN Leitungen mit Isolierklebeband umwickeln.

• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés

avec de la bande isolante.

• Om kortsluiting te voorkomen, moet u de aansluitklemmen van ONGEBRUIKTE

gekleurde draden met isolatieband bedekken.

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest

anzuschließen.

Souder les âmes des fils pour les raccorder

entre eux de façon sûre.

Draai de kerndraden om elkaar heen wanneer

u ze wilt aansluiten.

Soldeer de kerndraden zodat ze stevig vast zitten.

For some VW/Audi or Opel (Vauxhall) automobile

A If your car is equipped with the ISO connecter

Wenn Ihr Auto mit ISO-Steckern ausgestattet ist

Si votre voiture est équippée d’un connecteur ISO

Indien uw auto is uitgerust met de ISO-connector

Für manche VW/Audi oder Opel (Vauxhall) Fahrzeuge

Pour certaine voiture VW/Audi ou Opel (Vauxhall)

Voor bepaalde modellen VW/Audi of Opel (Vauxhall) geldt

You may need to modify the wiring of the supplied power cord as illustrated.

• Contact your authorized car dealer before installing this unit.

• Connect the ISO connectors as illustrated.

• Die ISO-Stecker wie abgebildet anschließen.

• Connectez les connecteurs ISO comme montré sur l’illustration.

• Sluit de ISO-connectoren aan zoals op het voorbeeld is aangegeven.

Sie müssen evtl. die Verdrahtung des mitgelieferten Stromkabels wie abgebildet ändern.

• Wenden Sie sich an Ihre Vertragswerkstatt, bevor Sie das Gerät einbauen.

Vous aurrez peut-être besoin de modifier le câblage du cordon d’alimentation fourni comme montré sur l’illustration.

• Contactez votre revendeur automobile autorisé avant d’installer l’appareil.

Wellicht moet u de bedrading van het meegeleverde snoer als in het voorbeeld aanpassen.

• Neem contact op met uw offici’le autodealer alvorens dit apparaat te installeren.

Original wiring

Yellow/Gelb/Jaune/Geel

Originalverdrahtung

Câblage original

Originele bedrading

Red/

From the car body

Von der Karosserie

De la carrosserie de la

voiture

Red/Rot/Rouge/ Rood

ISO connector

ISO-Stecker

Rot/

Red/Rot/Rouge/ Rood

Rouge/

Connecteur ISO

ISO-connector

Rood

Vanaf de auto

Use modified wiring 2 if the unit does

not turn on.

Geänderte Verdrahtung 2

verwenden, wenn das Gerät so nicht

an geht.

Modified wiring 1

Geänderte

Verdrahtung 1

Yellow/Gelb/Jaune/Geel

Utilisez le câblage modifié 2 si

l’appareil

ne se met pas sous tension.

Pas de bedrading 2 aan indien het

apparaat niet reageert bij inschakelen.

Câblage modifié 1

Aangepaste bedrading 1

Red/

Rot/

Rouge/

Red/Rot/Rouge/ Rood

ISO connector of the supplied power cord

ISO-Stecker am Stromkabel

Connecteur ISO pour le cordon d’alimentation fourni

ISO-connector van het meegeleverde snoer

Red/Rot/Rouge/ Rood

Rood

Modified wiring 2

Geänderte

Verdrahtung 2

Câblage modifié 2

Aangepaste bedrading 2

View from the lead side

Yellow/Gelb/Jaune/Geel Yellow/Gelb/Jaune/Geel

Ansicht von der Leitungsseite

Vue à partir du côté des fils

Aanzicht vanaf het snoer

Red/

Rot/

Red/ Rot/

Rouge/ Rood

Rouge/ Red/Rot/Rouge/ Rood

Rood

DEUTSCH

B Connections without using the ISO connectors / Anschlüsse ohne ISO-Stecker / Connexions sans l’utilisation des connecteurs ISO /

Verbindingen zonder ISO-connectoren

Avant de commencer la connexion: vérifiez Alvorens de verbindingen tot stand te brengen:

attentivement le câblage du véhicule. Une moet u de bedrading in de auto zorgvuldig. Het apparaat

connexion incorrecte peut endommager kan door verkeerde verbindingen ernstige schade

Vor dem Anschließen: Die Verdrahtung im

Fahrzeug sorgfältig überprüfen. Falsche

Anschlüsse können ernsthafte Schäden am Gerät

hervorrufen.

Before connecting: Check the wiring in the

vehicle carefully. Incorrect connection may

cause serious damage to this unit.

sérieusement l’appareil.

oplopen.

1 Cut the ISO connector.

1 Coupez le connecteur ISO.

1 Knip de ISO-connector los.

1 Den ISO-Stecker abschneiden.

2 Connect the colored leads of the power

cord to the car battery, speakers and power

aerial (if any) in the following sequence.

2 Connectez les fils de couleur du cordon

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en

a une) dans l’ordre suivant.

2 Die farbigen Leitungen des

2 Sluit de gekleurde snoerdraden van de stroomkabel

in de hierna genoemde volgorde aan op de accu van

de auto, de luidsprekers en de antenne (indien

aanwezig).

Spannunsgversorgungskabels an der

Autobatterie, den Lautsprechern und dem

Motorantenne (sofern vorhanden) in folgender

Reihenfolge anschließen.

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to power

aerial (200 mA max.)

1 Noir: à la masse

1 Zwart: aarde

2 Geel: naar de accu van de auto

(constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar de antenne

(Max. 200 mA)

5 Oranje met witte streep: naar de schakelaar

voor de autoverlichting

6 Bruin: naar het mobiele-telefoonsysteem

(Lees voor meer informatie de instructies die

bij de mobiele telefoon worden geleverd.)

7 Andere: naar de speakers

2 Jaune: à la batterie de la voiture

(12 V constant)

1 Schwarz: Erdung

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zur Motorantenne

(max. 200 mA)

3 Rouge: à la prise accessoire

4 Bleu avec bande blanche:

5 Orange with white stripe: to car light

control switch

à l’antenne automatique (200 mA max.)

5 Orange avec bande blanche:

à l’interrupteur d’éclairage de la voiture

6 Marron: à un système de téléphone

cellulaire (Pour les détails, se référer aux

instructions du téléphone cellulaire.)

7 Autres: aux enceintes

6 Brown: to cellular phone system (For

details, refer to the instructions of

the cellular phone.)

5 Orange mit weißem Streifen: zur

Autolichtschalter

6 Braun: zur Mobiltelefon (Weitere

informationen entnehmen Sie bitte der

Bedienungsanleitung des Mobiltelefons.)

7 Andere: zur Lautsprecher

7 Others: to speakers

3 Connect the aerial cord.

4 Finally connect the wiring harness to the

3 Connectez le cordon d’antenne.

unit.

3 Das Antennenkabel anschließen.

3 Sluit de antenne aan.

4 Verbind de draadbundel daarna met het apparaat.

4 Finalement, connectez le faisceau de fils à

4 Die Kabelbäume am Gerät anschließen.

l’appareil.

Cut the ISO connector

Den ISO-Stecker abschneiden

Coupez le connecteur ISO

Knip de ISO-connector los

CD changer

(or another external

component)

When connecting a CD changer, we recommend to use one of the CH-X series CD changers.

• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).

Only for KD-SH55R :

You can also use an external component such as a portable MD player by connecting the Line Input Adaptor

KS-U57 (not supplied). (See diagram C .)

CD-Wechsler

(oder eine andere

externe

Komponente)

Changeur CD JVC

(ou autre appareil

extérieur)

CD-wisselaar

(of een ander extern

apparaat)

Wenn Sie einen CD-Wechsler anschließen möchten, empfiehlt es sich, einen CD-Wechsler der Modellreihe

To aerial

Zur Antenne

A l’antenne

Naar de antenne

CH-X zu verwenden.

• Wenn Ihr CD-Wechsler zur Modellreihe KD-MK gehören, benötigen Sie ein anderes Kabel (KS-U15K).

Nur für KD-SH55R :

Sie können auch eine externe Komponente, z.B. einen tragbaren MD-Spieler, verwenden, wenn Sie den

(nicht zum Lieferumfang gehörenden) Line-Eingangsadapter KS-U57 anschließen. (Siehe Schaltplan C .)

Lors de la connexion d’un changeur CD, nous vous recommandons d’utiliser un des changeurs CD de la série

CH-X.

Aerial terminal

Antennenan-

• Si votre changeur appartient à la série KD-MK, vous avez besoin d’un cordon optionnel (KS-U15K).

Seulement pour le KD-SH55R :

schlußklemme

Borne de l’antenne

Aansluitpunt antenne

Vous pouvez aussi utiliser un appareil extérieur tel qu’un lecteur de MD en connectant l’adaptateur d’entrée de

ligne KS-U57 (non fourni). (Voir le diagramme C .)

Voor het aansluiten van een CD-wisselaar raden we een wisselaar uit de CH-X-serie aan.

• Als de CD-wisselaar die u wilt aansluiten uit de KD-MK-serie komt, hebt u een extra kabel nodig (KS-U15K).

Alleen voor KD-SH55R :

Het is ook mogelijk een extern apparaat zoals een draagbare MD-speler aan te sluiten met behulp van de Line Input

Adapter KS-U57 (niet meegeleverd). (Zie schema C .)

15 A fuse

Rear ground terminal

Hintere

Erdungscanschlußklemme

Borne arrière de masse

Massaklem aan de achterkant

15 A Sicherung

Fusible 15 A

Zekering 15 A

Not included with this unit.

Ignition switch

Wird nicht mit Gerät mitgeliefert.

Non fourni avec cet appareil.

Niet bij het apparaat inbegrepen.

Zündschalter

Black

Schwarz

Noir

Interrupteur d’allumage

Contactschakelaar

LINE OUT

(FRONT)

Zwart

To metallic body or chassis of the car

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Au corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

LINE OUT

(REAR)

Yellow*¹

SUBWOOFER OUT

(KD-SH77R)

Gelb*¹

Jaune*¹

Geel *¹

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition swich)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

Anschließen an die Autobatterie (Umgehen des Zündschalters)

À une borne sous tension du porte-fusible connectée à la batterie

de la voiture (en dérivant l’interrupteur d’allumage)

LINE IN

(KD-SH77R)

EXT OUT

(KD-SH55R)

Red

Rot

Rouge

Rood

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

CONTROL

(KD-SH77R)

Fuse block

Sicherungsblock

Porte-fusible

Zekeringblok

To an accessory terminal in the fuse block

Zur einer Zubehöranschlußklemme im Sicherungsblock

À borne accessoire du porte-fusible

Naar een aansluitklem in het zekeringblok

See diagram C .

Siehe Schaltplan C .

Voir le diagramme C .

Zie schema C .

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To power aerial if any

Zur Motorantenne, sofern vorhanden

À l’antenne automatique s’il y en a une

Naar de antenne (indien aanwezig)

*1:Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

*1:Vor der Überprüfung der Funktionsfähigkeit des

Geräts vor dem Einbau, muß diese Leitung

angeschlossen werden, da sonst die

Stromversorgung nicht eingeschaltet werden kann.

*1:Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil

ne peut pas être mis sous tension.

*1:Voordat u controleert of het apparaat werkt (alvorens

het te installeren), moet deze draad aangesloten zijn.Als

dit niet het geval is, kan de stroom niet worden

ingeschakeld.

Orange with white stripe

Orange mit weißem Streifen

Orange avec bande blanche

Oranje met witte streep

To car light control switch

Zum Autolichtschalter

À l’interrupteur d’éclairage de la voiture

Naar de schakelaar voor de autoverlichting

(ILLUMINATION)

To cellular phone system

Brown / Braun / Marron / Bruin

Zur Moblitelephon

À un système de téléphone cellulaire

Naar het mobiele-telefoonsysteem

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

Purple with black

stripe

Gray with black stripe

Gray

Green with black stripe

Grün mit schwarzem

Streifen

Vert avec bande noire

Groen met zwarte streep

Green

Grün

Vert

Purple

Lila

Violet

Paars

White

Weiß

Blanc

Wit

Grau mit schwarzem

Streifen

Gris avec bande noire

Grijs met zwarte streep

Grau

Gris

Grijs

Lila mit schwarzem

Streifen

Groen

Violet avec bande noire

Paars met zwarte streep

Right speaker (rear)

Rechter Lautsprecher

(hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

Left speaker (front)

Left speaker (rear)

Right speaker (front)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

PRECAUTIONS on power supply and

speaker connections:

VORSICHTSMASSREGELN beim

Anschließen der Stromversorgung

und Lautsprecher:

PRECAUTIONS sur l’alimentation et

la connexion des enceintes:

VOORZORGSMAATREGELEN bij het

verbinden van de

stroomkabeldraad met de speakers:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse),

le fil jaune (a la batterie de la voiture,12 V

constant) et le fil rouge (à la prise accessoire).

• AVANT de connecter les fils d’enceintes du

cordon d’alimentation aux enceintes, vérifiez le

câblage des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil

en utiliscant ce câblage original des enceintes.

Si vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de

façon que vous puissiez connecter l’appareil

aux enceintes comme montré sur la Fig. 3.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig.3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe

Leitung (zur Autobatterie, konstant 12 V) und die

rote Leitung (zur Zubehöranschlußklemme)

richtig anschließen.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in

Ihrem Auto überprüfen.

– Ist die Lautsprecherverdrahtung wie

unten in “Fig. 1” und “Fig. 2” abgebildet,

das Gerät NICHT mit der

Originalverdrahtung der Lautsprecher

anschließen, da sonst das Gerät schwer

beschädigt wird.

• Verbind de speakerdraden van de

stroomkabel NIET met de accu van de auto;

als u dit wel doet, zal het apparaat ernstige

schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de

accu van de auto, constant 12 V) en de rode draad

(naar de aansluitklem van de accessoire) op de juiste

wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel

met de speakers verbindt, moet u de bedrading van

de speakers in uw auto controleren.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1

en Fig. 2, mag het apparaat NIET worden

aangesloten met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het

apparaat ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals

staat afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de

oorspronkelijke speakerbedrading in uw auto.

– Als u twijfels hebt over de speakerbedrading in

uw auto, moet u contact opnemen met uw

autodealer.

• DO NOT connect the speaker leads of the

power cord to the car battery; otherwise, the

unit will be seriously damaged.

• Connect the black lead (ground), yellow lead

(to car battery, constant 12 V), and red lead

(to an accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker

wiring. If you do, the unit will be seriously

damaged.

Redo the speaker wiring so that you can

connect the unit to the speakers as

illustrated in Fig. 3.

Die Lautsprecherverdrahtung erneuern, so

daß Sie das Gerät an den Lautsprechern wie

in “Fig. 3” abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem

Auto wie in “Fig. 3” abgebildet, können Sie

das Gerät mit der Originalverdrahtung der

Lautsprecher in Ihrem Auto anschließen.

– Sind Sie sich über die

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of

your car, consult your JVC IN-CAR

– Si vous n’êtes pas sûrs du câblage d’enceintes

de votre voiture, consulter le concessionnaire

de votre voiture.

ENTERTAINMENT dealer.

Lautsprecherverdrahtung in Ihrem Auto nicht

sicher, wenden Sie sich an Ihren Autohändler.

Fig. 2

Fig. 3

Fig. 1

C Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

Amplifier / Verstärker / Amplificateur / Versterker

You can connect an amplifier and other

Sie können einen Verstärker oder ein anderes Gerät Vous pouvez connecter un amplificateur ou autre Het is mogelijk om uw autostereosysteem uit te

equipment to upgrade your car stereo system. anschließen, um Ihre Autostereoanlage zu erweitern. appareil pour améliorer votre système autoradio. breiden met een versterker of andere apparatuur.

• Connect the remote lead (blue with white • Schließen Sie das Fernbedienungskabel (blau mit • Connectez le fil de commande à distance (bleu • Verbind de externe kabel (blauw met witte streep)

stripe) to the remote lead of the other

equipment so that it can be controlled

through this unit.

weißem Streifen) an das Fernbedienungskabel

des anderen Geräts an, so daß es über dieses

Gerät gesteuert werden kann.

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

met de externe kabel van het andere apparatuur

zodat deze op afstand vanaf deze apparaat kan

worden bediend.

For KD-SH77R:

• For amplifier:

Für KD-SH77R:

• Hinweise zum Verstärker:

Pour le KD-SH77R:

• Pour l’amplificateur seulement:

Voor KD-SH77R:

• Alleen voor een versterker:

– Die Anschlußklemmen am Ausgang dieses

Gerät an den Anschlußklemmen des

Eingangs des Verstärkers anschließen.

– Die Lautsprecher von diesem Gerät

abtrennen und amVerstärker anschließen.

Die Lautsprecherleitungen dieses Geräts

unbenutzt lassen.

Sie können den integrierten Verstärker

ausschalten und die Audiosignale nur an den (die)

externen Verstärker leiten, um einen

verzerrungsfreien Klang zu erhalten und um zu

verhindern, daß sich im Innern des Geräts ein

Wärmestau bildet. Auf Seite 25 finden Sie weitere

Anleitungen (separate Lautstärke).

– Connect this unit’s line-out terminals to

the amplifier’s line-in terminals.

– Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused.

– You can switch off the built-in amplifier

and send the audio signals only to the

external amplifier(s) to get clear sounds

and to prevent internal heat builtup

inside the unit. See page 25 of the

Instructions (separate volume).

– The line output level of this unit is kept

high to maintain the hi-fi sounds

reproduced from this unit.

When connecting an external amplifier

to this unit, turn down the gain control

on the external amplifier to obtain the

best performance from this unit.

– Raccorder les bornes de sortie ligne de cet

appareil aux bornes d’entrée ligne de

l’amplificateur.

– Déconnectez les enceintes de cet appareil

et connectez-les à l’amplificateur. Laissez

les fils d’enceintes de cet appareil

inutilisés.

– Vous pouvez désactiver l’amplificateur intégré

et envoyer les signaux audio uniquement à

un ou plusieurs amplificateurs extérieurs afin

d’obtenir un son clair et pour éviter un

échauffement interne de l’appareil. Référez-

vous à la page 25 du mode d’emploi (volume

séparé).

– Le niveau de sortie de ligne de cet appareil

est maintenu à un niveau élevé pour maintenir

une qualité Hi-Fi pour les sons reproduits par

cet appareil.

– Verbind de uitgang van het apparaat met de

ingang van de versterker.

– Koppel de speakers van dit apparaat los

en verbind ze aan de versterker. Gebruik

de speakerdraden van dit apparaat niet.

– Het is mogelijk de ingebouwde versterker uit te

schakelen en de audiosignalen alleen naar de

externe versterker(s) te sturen. U krijgt zo een

helderder geluid en voorkomt dat zich warmte

in de eenheid opbouwt. Zie bladzijde 25 van de

instucties (aparte uitgave).

– Het uitgangsniveau van het geluid is hoog om

het hifi-geluid van deze eenheid te behouden.

Wanneer u een extern apparaat op deze

eenheid aansluit, moet u erop letten dat

u de versterkingsfactor van de externe

versterker laag houdt, zodat deze

eenheid de beste prestaties levert.

–

– Der Ausgangspegel dieses Geräts wird auf

einem hohen Wert gehalten, um den Hifi-

Klang zu unterstützen, den dieses Gerät

reproduziert.

Wenn Sie einen externen Verstärker an

dieses Gerät anschließen, stellen Sie den

Verstärkungsregler des externen Verstärkers

herunter, um die bestmögliche Leistung

dieses Geräts zu erzielen.

Lors de la connexion d’un amplificateur

extérieur à cet appareil, diminuez le réglage

du gain sur l’amplificateur extérieur pour

obtenir les meilleures performances de cet

appareil.

For KD-SH55R:

• For amplifier:

Für KD-SH55R:

• Für den Verstärker:

Pour le KD-SH55R:

• Pour l’amplificateur seulement:

Voor KD-SH55R:

• Alleen voor een versterker:

– Die Anschlußklemmen am Ausgang dieses

Gerät an den Anschlußklemmen des

Eingangs des Verstärkers anschließen.

– Die Lautsprecher von diesem Gerät

abtrennen und amVerstärker anschließen.

Die Lautsprecherleitungen dieses Geräts

unbenutzt lassen.

• Hinweise zum Subwoofer: Es ist ein Tiefpaßfilter

erforderlich, wenn Sie keinen JVC-Verstärker

verwenden. Sie können den Ausgangspegel

einstellen, der über die Anschlüsse EXT OUT

bereitgestellt wird (siehe Seite 20 der

(separaten) Bedienungsanleitung).

– Connect this unit’s line-out terminals to

the amplifier’s line-in terminals.

– Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused.

• For Subwoofer: A low-pass filter is required

when using an amplifier of other manufactures

than JVC. You can adjust the output level

through the EXT OUT plugs (see page 20 of

the Instruction (separate volume).

– Raccorder les bornes de sortie ligne de cet

appareil aux bornes d’entrée ligne de

l’amplificateur.

– Déconnectez les enceintes de cet appareil

et connectez-les à l’amplificateur. Laissez

les fils d’enceintes de cet appareil • Voor de subwoofer: Als u een versterker van een

inutilisés.

• Pour le caisson de grave: Si vous utilisez un

amplificateur d’un autre fabricant que JVC,

vous devez connecter un filtre passe-bas.

Vous pouvez ajuster le niveau de sortie par

les fiches de sortie auxiliaire (EXT OUT)

(référez-vous à la page 20 du mode d’emploi

(volume séparé)).

– Verbind de uitgang van het apparaat met de

ingang van de versterker.

– Koppel de speakers van dit apparaat los

en verbind ze aan de versterker. Gebruik

de speakerdraden van dit apparaat niet.

ander merk dan JVC gebruikt, hebt u een low-pass

filter nodig. Het uitvoervolume kan worden

aangepast via de EXT OUT-stekkers (zie pagina

20 van de instructies - aparte uitgave).

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

Remote lead

Y-connector (not supplied with this unit)

Y-Anschluß (nicht mitgeliefert)

Fernbedienungsleitung

Fil d’alimentation à distance

Antennedraad

INPUT

JVC Amplifier

JVC Verstärker

JVC Amplificateur

Connecteur Y (non fourni avec cet appareil)

Y-connector (niet meegeleverd)

Remote lead (Blue with white stripe)

JVC Versterker

To power aerial if any

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

Fernbedienungsleitung (Blau mit weißem Streifen)

Fil d’alimentation à distance (Bleu avec bande blanche)

Antennedraad (Blauw met witte streep)

Zur Motorantenne, sofern vorhanden

À l’antenne automatique, s’il y en a une

Naar de antenne (indien aanwezig)

LINE OUT (REAR)

Cut the rear speaker leads of the car’s ISO connector and connect them to the amplifier.

Die Leitungen des ISO-Steckers der hinteren Lautsprecher durchtrennen und am Verstärker anschließen.

Coupez les fils des enceintes arrière du connecteur ISO de la voiture et connectez-les à l’amplificateur.

Knip de draden van de achterste luidspreker van de ISO-connector van de auto door en sluit deze draden aan op de versterker.

LINE OUT (FRONT)

B2 A2

B3 A3

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

INPUT

JVC Amplifier

JVC Verstärker

JVC Amplificateur

CAUTION / VORSICHT / PRECAUTION / LET OP:

• To prevent internal heat buildup inside this unit, place this unit UNDER

JVC Versterker

Rear speakers

Hintere Lautsprecher

the other equipment.

Enceintes arrière

You can connect another power amplifier for front speakers.

Sie können einen anderen Leistungsverstärker für die vorderen

Lautsprecher anschließen.

Vous pouvez connecter un autre amplificateur de puissance pour les

enceintes avant.

• Zur Vermeidung eines Hitzestaus in diesem Gerät, dieses Gerät UNTER

die andere Geräteansrüstung stellen.

• Pour éviter un échauffement interne de cet appareil,placez-le SOUS l’autre

appareil.

• Om interne verhitting van het apparaat te voorkomen, dient u ervoor te

zorgen dat het apparaat ONDER de andere apparatuur wordt geplaatst.

Achterspeakers

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

U kunt nog een eindversterker voor de voorspeakers aansluiten.

CD changer and DAB tuner / CD-Wechsler und DAB-Tuner / Changeur CD et tuner DAB / CD-wisselaar en DAB-tuner

Het is mogelijk een JVC CD-wisselaar en/of JVC DAB-

You can connect a JVC CD changer and/or a

JVC DAB (Digital Audio Broadcasting) tuner.

• For their connections, refer to the

Sie können einen CD-Wechsler und/oder einen

DAB-Tuner (Tuner für digitalen Rundfunk) von

JVC anschließen.

• Weitere Informationen über den Anschluß

können Sie der Bedienungscanleitung

entnehmen, die dem jeweiligen Gerät beiliegt.

Vous pouvez connecter un changeur CD JVC et/

ou un tuner DAB (Digital Audio Broadcast) JVC.

• Pour leurs connexions, référez-vous aux modes

d’emploi qui les accompagnent.

tuner (Digital Audio Broadcasting) aan te sluiten.

• Zie de instructies van deze apparaten voor meer

informatie over het tot stand brengen van deze

aansluiting.

instructions supplied for them.

Connecting cord supplied with your DAB tuner or CD changer

Verbindungskabel, das zum Lieferumfang des DAB-Tuners oder CD-Wechslers gehört

Cordon de connexion fourni avec votre tuner DAB ou changeur CD

Verbindingskabel die met de DAB-tuner of CD-wisselaar wordt meegeleverd

Connecting cord supplied with your DAB tuner

Connecting cord supplied with your CD changer

Verbindungskabel, das zum Lieferumfang des DAB- Verbindungskabel, das zum Lieferumfang des CD-

Tuners gehört

Wechsler gehört

Cordon de connexion fourni avec votre tuner DAB

Cordon de connexion fourni avec votre changeur CD

Verbindingskabel die met de DAB-tuner wordt meegeleverd Verbindingskabel die met de CD-wisselaar wordt meegeleverd

oder

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

JVC DAB tuner

DAB-Tuner von JVC

Tuner DAB JVC

JVC DAB-tuner

KD-SH77R

KD-SH55R

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

JVC DAB tuner

DAB-Tuner von JVC

Tuner DAB JVC

JVC DAB-tuner

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is

turned off.

KD-SH77R

KD-SH55R

• Bevor Sie den CD-Wechsler und/oder den DAB-Tuner anschließen, vergewissern Sie

sich, daß das Gerät ausgeschaltet ist.

• Avant de connecter le changeur CD et/ou le tuner DAB, s’assurer que l’unité est éteinte.

• Zorg ervoor dat de apparat is uitgeschakeld alvorens u de en/of DAB-tuner CD-

wisselaar aansluit.

• You can connect both components in series as illustrated above.

• Es ist möglich, beide Komponenten in einer Serienschaltung entsprechend der obigen

Darstellung anzuschließen.

• Vous pouvez connecter les deux appareils en série comme montré ci-dessus.

• Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten.

Subwoofer and other source equipment / Subwoofer und andere externe Geräte / Caisson de grave et autre appareil source /

Subwoofer en andere apparatuur

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

You can connect a subwoofer to reinforce the Sie können einen Subwoofer zur Baßverstärkung

bass.

anschließen.

• For their connections, refer to the • Informationen darüber, wie diese Geräte

SUBWOOFER OUT

(For KD-SH77R only)

(Nur für KD-SH77R)

(Seulement pour le

KD-SH77R)

Subwoofer

Caisson de grave

Subwoofer

instructions supplied with your

subwoofer.

angeschlossen werden, finden Sie in der

Bedienungsanleitung, die zum Lieferumfang

der jeweiligen Komponente gehört.

(Alleen voor KD-SH77R)

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

KD-SH77R

KD-SH55R

Het is mogelijk om een subwoofer aan te sluiten om

het basgeluid te versterken.

Vous pouvez connecter un caisson de grave

pour renforcer les graves.

EXT OUT

(For KD-SH55R only)

(Nur für KD-SH55R)

(Seulement pour le KD-SH55R)

• Raadpleeg de instructies die bij het desbetreffende

• Pour leur connexion, référez-vous aux

instructions fournies avec chaque appareil.

apparaat werden meegeleverd voor meer informatie

over het totstandbrengen van deze aansluitingen.

(Alleen voor KD-SH55R)

DVD, VCR or TV / DVD, Videorecorder oder Fernsehgerät / DVD, Magnétoscope ou Téléviseur / DVD, Videorecorders en TV

For KD-SH77R only / Nur für KD-SH77R / Seulement pour le KD-SH77R / Alleen voor KD-SH77R

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

You can connect the DVD player (KV-DV7).

Sie können den DVD-Spieler (KV-DV7) anschließen.

Vous pouvez connecter un lecteur de DVD (KV-DV7).

Hei is mogelijk een DVD (KV-DV7) aan te sluiten.

KV-DV7

LINE IN

* To the mobile color monitor system or the audio-video input terminal of a stereo audio-

video TV.

OUTPUT

AUDIO

VIDEO

* Zum mobilen Farb- oder Monitorsystem oder dem Audio-Video-Eingang eines

KD-SH77R

stereophonen Audio-Video-Fernsehgeräts.

* Au système mobile de moniteur couleur ou aux prises d’entrée audio-vidéo d’un

téléviseur stéréo audio-vidéo.

DIGITAL

OUTPUT

(OPTICAL)

REMOTE

SENSOR

INPUT

* Naar het mobiele kleuren of monitorsysteem of de audio-/video-ingang van een stereo audio/video

TV.

Remote control data cord (supplied with KV-DV7)

Fernbedienungsdatenkabel (gehört zum Lieferumfang von KV-DV7)

Cordon de télécommande de données (fourni avec le KV-DV7

Snoer voor de afstandsbediening (meegeleverd met de KV-DV7)

CONTROL cord

Steuerungskabel

Cordon de commande

Snoer voor de afstandsbediening

)

External component / Externe Komponente / Appareil extérieur / Extern apparaat

For KD-SH55R only / Nur für KD-SH55R / Seulement pour le KD-SH55R / Alleen voor KD-SH55R

KD-SH55R

Line Input Adaptor KS-U57

Signal cord

(not supplied with this unit)

Einzelleitung

(nicht mit diesem Gerät mitgeliefert)

Cordon de signal

(non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

(not supplied with this unit)

External component

Externe Komponente

Appareil extérieur

Extern apparaat

Line-Eingangsadapter KS-U57

CD changer jack

Buchse für CD-Wechsler

Prise du changeur CD

(nicht mit diesem Gerät mitgeliefert)

Adaptateur d’entrée de ligne KS-U57

(non fourni avec cet appareil)

Aansluiting voor CD-wisselaar

Line Input Adapter KS-U57 (niet meegeleverd)

TROUBLESHOOTING

FEHLERSUCHE

PROBLEMEN OPLOSSEN

EN CAS DE DIFFICULTES

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

• Le fusible saute.

* Are the red and black leads connected

correctly?

* Lesfilsrougeetnoirsont-ilsracordéscorrectement?

• L’appareil ne peut pas être mise sous

tension.

* Le fil jaune est-elle raccordée?

• Power cannot be turned on.

* Is the yellow lead connected?

• Stromversorgung kann nicht eingeschaltet

werden.

* Ist die gelbe Leitung angeschlossen?

• Kein Ton aus den Lautsprechern.

* Ist die Lautsprecherausgangsleitung

kurzgeschlossen?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• Sound is distorted.

• Het geluid wordt vervormd.

• Le son est déformé.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers

grounded in common?

* Is de uitgaande speakerdraad geaard?

* Zijn de minpolen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit

sont-elles mises ensemble à la masse?

• Ton verzerrt.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• Unit becomes hot.

• Het apparaat raakt verhit.

• L’appareil devient chaud.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers

grounded in common?

* Is de uitgaande speakerdraad geaard?

* Zijn de minpolen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit

sont-elles mises ensemble à la masse?

• Gerät wird heiß.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

Alpha Tool Com HK Limited Benchmark HE CB33 User Manual
Black Box Cable Box RMT3200A R2 User Manual
Canon HFM30 User Manual
Canon MV10I User Manual
Cobra Electronics FRS235 User Manual
Compaq Bluetooth Headset User Manual
Eclipse Fujitsu Ten CD8053 User Manual
Hamilton Beach Summit Series User Manual
Honeywell FocusBT AP 010 BT User Manual
JBL VT4888 User Manual