Hanns G HN Series User Manual

19 inch HN Series  
TFT LCD Monitor  
USER’S MANUAL  
User’s Manual  
Congratulations!  
The display you have just purchased carries the TCO’03  
Displays label. This means that your display is designed,  
manufactured and tested according to some of the strictest  
quality and environmental requirements in the world. This makes  
for a high performance product, designed with the user in focus  
that also minimizes the impact on our natural environment.  
Some of the features of the TCO’03 Display requirements:  
Ergonomics  
Good visual ergonomics and image quality in order to improve the working environment  
for the user and to reduce sight and strain problems. Important parameters are  
luminance, contrast, resolution, reflectance, colour rendition and image stability.  
Energy  
Energy-saving mode after a certain time – beneficial both for the user and the  
environment  
Electrical safety  
Emissions  
Electromagnetic fields  
Noise emissions  
Ecology  
The product must be prepared for recycling and the manufacturer must have a certified  
environmental management system such as EMAS or ISO 14 001  
Restrictions on  
{ chlorinated and brominated flame retardants and polymers  
{ heavy metals such as cadmium, mercury and lead.  
The requirements included in this label have been developed by TCO Development in  
cooperation with scientists, experts, users as well as manufacturers all over the world.  
Since the end of the 1980s TCO has been involved in influencing the development of IT  
equipment in a more user-friendly direction. Our labelling system started with displays in  
1992 and is now requested by users and IT-manufacturers all over the world.  
For more information, please visit  
3
User’s Manual  
Recycling Information  
We, the HannStar Display Corp. care very much about our environment  
protection strategy and firmly believe that it helps us have healthier earth via appropriate  
treatment and recycling of industrial technology devices at the end-of-life.  
These devices contain recyclable materials, which can be re-decomposed and re-integrated  
into  
brand-new marvels. On the contrary, other material can be classified to hazardous and  
poisoned  
substances. We strongly encourage you to contact the provided information to recycle this  
product.  
Europe :  
Ireland  
Company : McGrath Environmental Consultants Ltd.  
Contact Person : Ms. McGrath Clodagh  
Address: 20 Lower John Street, Cork, Ireland.  
Tel : 021 4554833  
Fax : 021 4505805  
Norway :  
Company : Bergfald & Co as  
Contact Person : Mr. Solevåg Øystein  
Address : Solavågsvegen 90, EIDSNES, NORWAY ,Post Code : N-6037  
Tel : +47 40 23 47 05 Fax : +47 70 19 40 17  
United Kingdom :  
Company : ARENA Network Contact Person : Dr. Tillotson Allen  
Address : Bank Buildings Treforest Estate, Pontypridd, Rhondda Cynon Taff, Kindom Post  
Code :  
CF37 5UR  
Tel : 01443 844001 Fax : 01443 844002  
4
User’s Manual  
TABLE OF CONTENTS  
SAFETY NOTICE........................................................................................... 6  
PRECAUTIONS......................................................................................... 6  
SPECIAL NOTES ON LCD MONITORS ................................................... 7  
BEFORE YOU OPERATE THE MONITOR.................................................... 8  
FEATURES................................................................................................ 8  
CHECKING THE CONTENTS OF THE PACKAGE .................................. 8  
INSTALLATION INSTRUCTIONS ............................................................. 9  
POWER.................................................................................................... 10  
CONTROLS AND CONNECTORS.......................................................... 11  
ADJUSTING THE VIEWING ANGLE ...................................................... 12  
OPERATING INSTRUCTIONS..................................................................... 13  
GENERAL INSTRUCTIONS.................................................................... 13  
FRONT PANEL CONTROL ..................................................................... 14  
HOW TO ADJUST A SETTING ............................................................... 15  
PLUG AND PLAY .................................................................................... 16  
TECHNICAL SUPPORT (FAQ).................................................................... 18  
Q & A FOR GENERAL DEFECTIVE ....................................................... 18  
ERROR MESSAGE & POSSIBLE SOLUTION....................................... 19  
APPENDIX ................................................................................................... 20  
SPECIFICATIONS ................................................................................... 20  
CONNECTOR PIN ASSIGNMENT .......................................................... 21  
5
User’s Manual  
SAFETY NOTICE  
1. The changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply  
with the emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by  
unauthorized modification to this equipment. It is the responsibilities of the user to  
correct such interference.  
WARNING:  
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously  
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to  
qualified personnel only.  
PRECAUTIONS  
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry  
tub, swimming pool or in a wet basement.  
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can  
injure a person and cause serious damage to the appliance. Use only a cart or stand  
recommended by the manufacturer or sold with the monitor. If you mount the monitor on  
a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit  
instructions.  
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To  
ensure reliable operation of the monitor and to protect it from overheating, be sure these  
openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or  
similar surface. Do not place the monitor near or over a radiator or heat register. Do not  
place the monitor in a bookcase or cabinet unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated on the  
label. If you are not sure of the type of power supplied to your home, consult your dealer  
or local power company.  
Unplug the unit during a lightening storm or when it will not be used for long period of  
time. This will protect the monitor from damage due to power surges.  
Do not overload power strips and extension cords. Overloading can result in fire or  
electric shock.  
Never push any object into the slot on the monitor cabinet. It could short circuit parts  
causing a fire or electric shock. Never spill liquids on the monitor.  
Do not attempt to service the monitor by yourself; opening or removing covers can  
expose you to dangerous voltages and other hazards. Please refer all servicing to  
qualified service personnel.  
To ensure satisfactory operation, use the monitor only with UL listed computers which  
have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.  
The wall socket shall be installed near the equipment and shall be easily accessible.  
6
User’s Manual  
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitor and do not indicate a problem.  
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn  
off the Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop pattern  
you use.  
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of  
0.01% or less such as a missing pixel or a pixel lit all of the time.  
Due to the nature of the LCD screen, an afterimage of the previous screen may remain  
after switching the image, when the same image is displayed for hours. In this case, the  
screen is recovered slowly by changing the image or turning off the Power Switch for  
hours.  
If the screen suddenly flashes erratically or the backlighting fails, please contact your  
dealer or service center for repair. Do not attempt to repair the monitor yourself.  
7
User’s Manual  
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
19” TFT Color LCD Monitor  
Crisp, Clear Display for Windows  
Recommended Resolutions: 1280 X 1024 @60Hz  
EPA ENERGY STAR®  
Ergonomic Design  
Space Saving, Compact Case Design  
CHECKING THE CONTENTS OF THE PACKAGE  
The product package should include the following items:  
LCD Monitor  
(Reference only, the real feature is depended on selected model)  
Screen  
Base  
Cables and User manual  
Power Cord  
VGA Cable  
Audio Cable  
DVI Cable (dual input mode  
optional)  
User’s manual  
Warranty card  
8
User’s Manual  
INSTALLATION INSTRUCTIONS  
Install  
Remove  
Figure.1. Installing and Removing the Base  
INSTALLATION:  
1. Align the monitor with the opening in the base.  
2. Note that the longer section of the base points forward.  
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected  
correctly.  
4. Verify that the monitor is securely attached to the base by looking at the bottom of the  
base and making sure that the clips are fully engaged in the base.  
REMOVAL:  
1. Flip over the monitor so that it us upside down.  
2. Press the 2 clips that hold the monitor in place.  
3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are  
unattached.  
ADJUSTING THE STAND (Optional)  
Install  
Remove  
9
User’s Manual  
To set up the device, you need to assemble the monitor stand.  
Join the stand base to the stand post. You should be able to hear it slot in. Insert the screw  
enclosed, tightening it with a coin or a screwdriver, so that the stand base is attached  
securely to the stand post. To set up the device, you must fi t the monitor base together.  
You can adjust the height of the base. When the base of the monitor is extended, you can  
tilt the monitor 90° (Pivot function).  
POWER  
POWER SOURCE:  
1. Make sure that the power cord is the correct type required in your area.  
2. This LCD monitor has an Internal universal power supply that allows operation in either  
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)  
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other  
end to wall-outlet .  
10  
User’s Manual  
CONTROLS AND CONNECTORS  
CABLE CONNECTIONS:  
Turn off your computer before performing the procedure below.  
1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the  
other end to the computer’s D-Sub port.  
2. Connect one end of the 24-pin DVI cable (Dual input mode optional) to the back of the  
monitor and connect the other end to the computer’s DVI port.  
3. Connect the audio cable between the monitor's audio input and the PC's audio output  
(green port).  
4. Plug the AC-power cord one end to LCD monitor’s AC input socket, the other end to Wall  
outlet.  
5. Turn on your monitor and computer.  
Figure.2. Connecting Cables  
1.  
3.  
VGA Input  
Audio Input  
2.  
4.  
DVI Input (optional)  
Power AC Input  
11  
User’s Manual  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the full face of the monitor, then adjust  
the monitor’s angle to your own preference.  
Hold the stand so you do not topple the monitor when you change the monitor’s angle.  
You are able to adjust the monitor’s angle from 0° to 20°.  
monitor’s angle  
Figure.3.  
NOTES:  
Do not touch the LCD screen when you change the angle. It may cause damage or  
break the LCD screen.  
Be careful not to place fingers or hands near the hinges when tilting the monitor,  
otherwise pinching can result.  
12  
User’s Manual  
OPERATING INSTRUCTIONS  
GENERAL INSTRUCTIONS  
Press the power button to turn the monitor on or off. The other control buttons are located at  
front panel of the monitor (See Figure 4). By changing these settings, the picture can be  
adjusted to your personal preferences.  
The power cord should be connected.  
Connect the Signal cable from the monitor to the VGA card.  
Press the power button to turn on the monitor position. The power indicator will light up.  
Figure.4. External Control Button  
EXTERNAL CONTROLS:  
1.  
3.  
5.  
Menu / Enter  
Power Button  
Volume <  
2.  
4.  
6.  
Volume >  
Power Indicator  
Auto Adjustment  
13  
User’s Manual  
FRONT PANEL CONTROL  
Power Button:  
Press this button to switch ON/OFF of monitor’s power.  
Power Indicator:  
Green — Power On mode.  
Orange — Off mode.  
MENU / ENTER:  
1. Active OSD menu or function adjust confirm or  
2. Exit OSD menu when in volume OSD status.  
Volume < >:  
1. Activates the volume control when the OSD is OFF.  
2. Navigate through adjustment icons when OSD is ON or adjust a function when  
function is activated.  
Auto Adjust button:  
When OSD menu is in off status, press this button to activate the Auto Adjustment  
function.  
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and  
Focus.)  
NOTES:  
Do not install the monitor in a location near heat sources such as radiators or air dusts,  
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or  
shock.  
Save the original shipping box and packing materials, as they will come in handy if you  
ever have to ship your monitor.  
For maximum protection, repackage your monitor as it was originally packed at the  
factory.  
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains  
may be removed with a cloth lightly dampened with a mild detergent solution. Never use  
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage  
the cabinet. As a safety precaution, always unplug the monitor before cleaning it.  
14  
User’s Manual  
HOW TO ADJUST A SETTING  
OSD Diagram  
OSD Description  
Brightness/Contrast adjustment:  
Brightness: Adjusts brightness by using  
the buttons < or > (and in fig. 4).  
Contrast: Adjusts screen contrast by  
using the buttons < or > (and in fig.  
4).  
Image Control:  
Auto Adjustment: Automatically selects  
the optimal settings for image parameters  
(image position, phase, etc.) by using the  
button MENU (in fig. 4).  
H. Position: Controls the picture’s  
horizontal position.  
V. Position: Controls the picture’s vertical  
position.  
Clock: Sets up the internal clock. Larger  
values make the displayed image appear  
wider; smaller values make it appear  
compressed.  
Phase: Adjusts the internal clock’s time  
lag in order to optimize the screen image.  
Color:  
This menu lets you select a preset color  
temperature  
(9300K, 6500K) by pressing the OSD  
buttons < or > (and in fig. 4).  
Changes to the color temperature take  
immediate effect on screen. If you wish to  
set individual color values, select the  
Custom Color option. Then press the  
MENU button (in fig. 4) to select the  
red, green and blue settings and set the  
desired value using the OSD buttons < or  
> ( and in fig. 4). The current  
settings are automatically saved when you  
return to the previous level or exit the  
OSD menu.  
15  
User’s Manual  
OSD Diagram  
OSD Description  
OSD Control:  
H. OSD Position: Controls the OSD  
menu’s horizontal position.  
V. OSD Position: Controls the OSD  
menu’s vertical position.  
OSD Timeout: Determines how long (in  
seconds) the OSD menu waits before  
closing automatically after no action has  
been performed.  
Other:  
English. French. German. Italian. Spanish.  
Japanese. Portuguese. Nederlands.  
Korea. Simplify Chinese. Traditional  
Chinese.  
Input: Controls the selection of the input  
signal. The monitor allows you to make  
the following connections: analog graphics  
card via the 15-pin mini D-Sub interface,  
digital graphics card via the 24-pin DVI-D  
interface.  
Speaker Volume: Adjusts the monitor  
loudspeaker output volume.  
Information: There is an optional OSD  
window (on/off) that displays the newly  
adjusted screen resolution settings.  
PLUG AND PLAY  
Plug & Play DDC2B Feature  
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC  
STANDARD. It allows the monitor to inform the host system of its identity and, depending  
on the level of DDC used, communicate additional information about its display capabilities.  
The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request  
EDID information over the DDC2B channel.  
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO  
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE  
MUST BE A VIDEO INPUT SIGNAL.  
This monitor meets the Green monitor standards as set by the Video Electronics Standards  
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and  
The Swedish Confederation Employees (NUTEK). This feature is designed to conserve  
16  
User’s Manual  
electrical energy by reducing power consumption when there is no video-input signal  
present. When there is no video input signal this monitor, following a time-out period, will  
automatically switch to an OFF mode. This reduces the monitor's internal power supply  
consumption. After the video input signal is restored, full power is restored and the display  
is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the  
display is completely off. The display is restored by pressing a key on the keyboard, or  
clicking the mouse.  
17  
User’s Manual  
TECHNICAL SUPPORT (FAQ)  
Q & A FOR GENERAL DEFECTIVE  
PROBLEM & QUESTION  
POSSIBLE SOLUTION  
*Check if the Power Switch is in the ON position  
*Power Cord should be connected  
Power LED is not on  
*Check if the PC system is Plug & Play compatible  
*Check if the Video Card is Plug & Play compatible  
*Check if the D-15 plug pin of Video Cable is bent  
*Adjust the Contrast and Brightness Controls.  
No Plug & Play  
Picture is fuzzy  
Picture bounces or a wave  
pattern is present in the  
picture  
*Move electrical devices that may cause electrical  
interference.  
*Computer Power Switch should be in the ON position.  
*Computer Video Card should be snugly seated in its slot  
*Make sure monitor’s video cable is properly connected  
to the computer.  
*Inspect monitor’s video cable and make sure none of  
the pins are bent.  
The power LED is ON  
(orange) but there’s no  
video or no picture.  
*Make sure computer is operational by hitting the CAPS  
LOCK key on the keyboard while observing the CAPS  
LOCK LED. The LED should either turn ON or OFF after  
hitting the CAPS LOCK key.  
Missing one of the primary  
colors (RED, GREEN, or  
BLUE)  
*Inspect the monitor’s video cable and make sure that  
none of the pins are bent.  
Screen image is not centered *Adjust pixel frequency CLOCK and FOCUS or press  
or sized properly.  
hot-key (AUTO)  
Picture has color defects  
(white does not look white)  
*Adjust RGB color or select color temperature  
Horizontal or vertical  
*Use win 95/98/2000/NT/ME/XP shut-down mode Adjust  
CLOCK and FOCUS or perform hot- key (AUTO).  
disturbances on the screen  
ƒ
CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal  
sweep. If the frequency is not correct, the screen shows vertical stripes and the picture  
has not correct width.  
ƒ
ƒ
FOCUS adjusts the phase of the pixel clock signal. With a wrong phase adjustment the  
picture has horizontal disturbances in light picture.  
For FOCUS and CLOCK adjustment use “dot-pattern” or win 95/98/2000/NT/ME/XP  
shut-down mode pattern.  
18  
User’s Manual  
ERROR MESSAGE & POSSIBLE SOLUTION  
ƒ
CABLE NOT CONNECTED :  
1. Check that the signal-cable is properly connected, If the connector is loose, tighten  
the connector’s screws.  
2. Check the signal-cable’s connection pins for damage.  
ƒ
INPUT NOT SUPPORT :  
Your computer has been set to unsuitable display mode, set the computer to display  
mode given in the following table.  
FACTORY PRESET TIMING TABLE:  
HORIZONTAL  
FREQUENCY (kHz) FREQUENCY (Hz)  
VERTICAL  
VIDEO MODE  
VGA  
RESOLUTION  
640 × 480  
640 × 480  
640 × 480  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
1024 × 768  
1024 × 768  
1024 × 768  
1280 × 1024  
1280 × 1024  
640 × 350  
640 × 400  
720 × 400  
640 × 480  
832 × 624  
1152 × 870  
31.469  
37.500  
37.861  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
63.981  
79.976  
31.469  
31.469  
31.469  
35.000  
49.725  
68.681  
59.94  
75.00  
72.81  
56.25  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
60.02  
75.03  
70.09  
70.09  
70.09  
66.67  
74.55  
75.06  
SVGA  
VESA  
XGA  
SXGA  
IBM  
DOS  
MAC  
19  
User’s Manual  
APPENDIX  
SPECIFICATIONS  
Driving system  
Size  
TFT Color LCD  
48.2cm(19.0")  
Pixel pitch  
Brightness  
Contrast  
0.294mm(H) x 0.294mm(V)  
270cd/m2 (Typical)  
700:1 (Typical)  
150° (H) 135° (V)  
8 ms  
LCD Panel  
Viewable angle  
Response time  
R,G,B Analog Interface  
Digital (Dual-Input Model) H/V TTL  
Video  
Input  
H-Frequency  
V-Frequency  
31KHz – 80KHz  
55 – 75Hz  
Display Colors  
Dot Clock  
16.2M Colors  
135MHz  
Max. Resolution  
Plug & Play  
1280 x 1024 @75Hz  
VESA DDC2BTM  
ON Mode  
42W  
EPA ENERGY STAR®  
OFF Mode  
3W  
Rated Power 1W rms (Per channel)  
Audio output  
D-Sub 15pin  
DVI-D 24pin (Dual-Input Model)  
Input Connector  
Hor. :376.2mm  
Ver. :301.06mm  
Maximum Screen Size  
Power Source  
90~264VAC,47~63HZ  
Operating Temp: 5° to 40°C  
Storage Temp.: -20° to 65°C  
Operating Humidity: 10% to 85%  
Environmental  
Considerations  
417(W)×447(H)×198(D) mm (with stand)  
417(W)×545(H)×219(D) mm (with  
adjustable stand)  
Dimensions  
7.2 Kg / 5.7 K g (with stand)  
7.6 Kg / 6.1 K g (with adjustable stand)  
Weight (GW/NW)  
CCC, UL, TUV, BSMI, CE,  
CB,FCC,CUL,TCO03  
Regulatory Compliance  
20  
User’s Manual  
CONNECTOR PIN ASSIGNMENT  
ƒ
15 - Pin Color Display Signal Cable:  
1
6
5
10  
11  
15  
PIN NO.  
DESCRIPTION  
PIN NO.  
9.  
DESCRIPTION  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Red  
+5V  
Green  
10.  
Ground  
Ground  
Blue  
11.  
Ground  
Ground  
R-Ground  
G-Ground  
B-Ground  
12.  
DDC-Serial Data  
H-Sync  
13.  
14.  
V-Sync  
15.  
DDC-Serial Clock  
ƒ
24 - Pin Color Display Signal Cable: (Dual Input Mode)  
PIN NO.  
1.  
DESCRIPTION  
TMDS Data 2-  
PIN NO.  
13.  
DESCRIPTION  
TMDS Data 3+  
2.  
TMDS Data 2+  
TMDS Data 2/4 Shield  
TMDS Data 4-  
14.  
+5V Power  
3.  
15.  
Ground(for+5V)  
Hot Plug Detect  
TMDS Data 0-  
TMDS Data 0+  
TMDS Data 0/5 Shield  
TMDS Data 5-  
TMDS Data 5+  
TMDS Clock Shield  
TMDS Clock +  
TMDS Clock -  
4.  
16.  
5.  
TMDS Data 4+  
DDC Clock  
17.  
6.  
18.  
7.  
DDC Data  
19.  
8.  
Analog Vertical sync  
TMDS Data 1-  
20.  
9.  
21.  
10.  
11.  
12.  
TMDS Data 1+  
TMDS Data 1/3 Shield  
TMDS Data 3-  
22.  
23.  
24.  
21  

Atlantis A03 P625 User Manual
Audiovox VOH684 User Manual
Black Decker BL10450HR User Manual
Blaupunkt ACAPULCO MP54 7 644 252 310 User Manual
Cary Audio Design SLP 05 User Manual
Clarion DXZ576USB User Manual
Cuisinart Blender CSB 78 User Manual
Hypertec Tech Air 5901 User Manual
JBL 652 User Manual
JVC Camcorder KY F550 User Manual