Appendix
For Your Safety
mally follow the operating instructions. Ad-
just only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the video
product to its normal operation.
Antennas
Use
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the
antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-
video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp
system is grounded so as to provide some cloth for cleaning.
protection against voltage surges and built-
up static charges. Section 810 of the National
Object and Liquid Entry: Never push objects
of any kind into this video product through
Electrical Code, ANSI/NFPA No. 70, provides
openings as they may touch dangerous volt-
When the video product exhibits a distinct
information with respect to proper ground-
age points or short out parts that could result
change in performance—this indicates
need for service.
a
ing of the mast and supporting structure,
in a fire or electric shock. Never spill liquid of
grounding of the lead-in wire to an antenna
any kind on the video product.
Replacement Parts: When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteris-
tics as the original part. Unauthorized sub-
stitutions may result in fire, electric shock or
other hazards.
discharge unit, size of grounding conductors,
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the vid-
eo product due to lightning and power-line
surges.
location of antenna discharge unit, connec-
tion to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
Safety Check: Upon completion of any service
or repairs to this video product, ask the ser-
vice technician to perform safety checks to
determine that the video product is in proper
operating condition.
Service
Antenna
Electric Service
Equipment
Servicing: Do not attempt to service this video
product yourself as opening or removing cov-
ers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified
service personnel.
Discharge Unit
(NEC SECTION
810-20)
Ground Clamps
Grounding
Conductors
(NEC SECTION
810-21)
Damage Requiring Service: Unplug this video
product from the wall outlet and refer servic-
ing to qualified service personnel under the
following conditions:
Power Service Grounding
Electrode System (NEC ART
250. PART H)
Power Lines: An outside antenna system • When the power-supply cord or plug is
should not be located in the vicinity of over-
damaged.
head power lines or other electric light or • If liquid has been spilled, or objects have
power circuits, or where it can fall into such
fallen into the video product.
power lines or circuits. When installing an • If the video product has been exposed to
outside antenna system, extreme care should
rain or water.
be taken to keep from touching such power • If the video product has been dropped or
lines or circuits as contact with them might
be fatal.
the cabinet has been damaged.
If the video product does not operate nor-
iii
For Your Safety
Be sure to read these notes before use
WARNING
Safety Notes
Do not use the camera in the bathroom or shower. This can cause
a fire or electric shock.
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
Do not use in
the bathroom or
shower
• After reading these safety notes, store them in a safe place.
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
Do not
disassemble
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precau-
tion could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not touch
internal parts
This icon indicates that death or serious injury can result if the
information is ignored.
WARNING
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
This icon indicates that personal injury or material damage can
result if the information is ignored.
CAUTION
The icons shown below are used to indicate the nature of the instruc-
tions which are to be observed.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Triangular icons tell you that this information requires atten-
tion (“Important”).
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can re-
sult in you falling down or being involved in a traffic accident.
Circular icons with a diagonal bar tell you that the action indi-
cated is prohibited (“Prohibited”).
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
Do not use the battery except as specified. Load the battery as
shown by the indicator.
WARNING
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic prod-
ucts. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
Unplug from
power socket
odor, or is in any other abnormal state can cause a fire or elec-
tric shock. Contact your FUJIFILM dealer.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or elec-
tric shock. Contact your FUJIFILM dealer.
Avoid exposure
to water
iv
For Your Safety
WARNING
CAUTION
Do not use the charger to charge batteries other than those specified
here. The supplied battery charger is for use only with the type
of battery supplied with the camera. Using the charger to charge
conventional batteries or other types of rechargeable batteries
can cause the battery to leak fluid, overheat or burst.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the cas-
ing or cause a fire.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Do not use in the presence of flammable objects, explosive gases,
or dust.
Unplug from
power socket
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small chil-
dren. If a child swallows a memory card, seek medical atten-
tion or call an emergency number.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal clean-
ing every two years. Please note that this service is not free
of charge.
CAUTION
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Do not use this camera in locations affected by oil fumes, steam, hu-
midity or dust. This can cause a fire or electric shock.
Keep the flash window clean and do not use the flash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.
Do not leave this camera in places subject to extremely high temper-
atures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connect-
ed. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
v
For Your Safety
■ Charging the Battery
■ Cautions: Handling the Battery
The Battery and Power Supply
Charge the battery in the supplied battery • Do not transport or store with metal objects
charger. Charging times will increase at am-
bient temperatures below +10 °C (+50 °F) or • Do not expose to flame or heat.
above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.
charge the battery at temperatures above • Use with designated chargers only.
40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical
Note: Check the type of battery used in
your camera and read the appropriate
sections.
such as necklaces or hairpins.
The following describes the proper use of
batteries and how to prolong their life. Incor-
rect use can shorten battery life or cause leak-
age, overheating, fire, or explosion.
(+32 °F), the battery will not charge.
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
Do not attempt to recharge a fully charged
battery. The battery does not however need
to be fully discharged before charging.
Li-ion Batteries
Read this section if your camera uses a
rechargeable Li-ion battery.
The battery may be warm to the touch imme-
diately after charging or use. This is normal.
The battery is not charged at shipment.
Charge the battery before use. Keep the bat-
tery in its case when not in use.
AA Alkalline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH bat-
teries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■ Battery Life
At normal temperatures, the battery can be
recharged about 300 times. A noticeable de-
crease in the length of time the battery will
hold a charge indicates that it has reached
the end of its service life and should be re-
placed.
■ Notes on the Battery
The battery gradually loses its charge when
not in use. Charge the battery one or two
days before use.
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
store in warm or humid conditions.
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not disassemble or modify the batteries
or battery casing.
• Do not subject to strong physical shocks.
• Do not use batteries that are leaking, de-
formed, or discolored.
Battery life can be extended by turning the
camera off when not in use.
■ Storage
Performance may be impaired if the battery is
left unused for extended periods when fully
charged. Run the battery flat before storing it.
Battery capacity decreases at low tempera-
tures; a depleted battery may not function at
when cold. Keep a fully charged spare battery
in a warm place and exchange as necessary,
or keep the battery in your pocket or other
warm place and insert it in the camera only
when shooting. Do not place the battery in
direct contact with hand warmers or other
heating devices.
If the camera will not be used for an extended
period, remove the battery and store it in a
dry place with an ambient temperature of
from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of
temperature.
• Keep out of reach of infants and small chil-
dren.
• Insert in the correct orientation.
vi
For Your Safety
• Do not mix old and new batteries, batteries ■ Ni-MH Batteries
with different charge levels, or batteries of The capacity of Ni-MH batteries may be
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters desig-
nated for use with this camera. Other adapt-
ers could damage the camera.
different types.
temporarily reduced when new, after long
• If the camera will not be used for an ex- periods of disuse, or if they are repeatedly
tended period, remove the batteries. Note recharged before being fully discharged. This
that the camera clock will be reset.
is normal and does not indicate a malfunc-
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• The batteries may be warm to the touch im- tion. Capacity can be increased by repeatedly
mediately after use. Turn the camera off and discharging the batteries using the discharge
allow the batteries to cool before handling. option in the camera setup menu and re-
• Battery capacity tends to decrease at low charging them using a battery charger.
temperatures. Keep spare batteries in
a
Q
CAUTION: Do not use the discharge option
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with
soft, dry cloth before inserting them in the
camera.
• Do not use with other devices.
• Do not disassemble.
with alkaline batteries.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended pe-
riod may be drawn down to the point that
they no longer hold a charge. Battery perfor-
mance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeat-
edly being discharged and recharged have
reached the end of their service life and must
be replaced.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
a
If the batteries leak, clean the battery
compartment thoroughly before in-
serting new batteries.
If fluid from the battery comes into
contact with skin or clothing, flush
the affected area with water. If fluid
enters your eyes, immediately flush the
affected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
Ni-MH batteries can be recharged in a battery
charger (sold separately). Batteries may be-
come warm to the touch after charging. Refer
to the instructions provided with the charger
for more information. Use the charger with
compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
vii
For Your Safety
Liquid CCrystal
Electrical Innterference
Using the Camera
In the event that the LCD monitor is damaged, This camera may interfere with hospital or
care should be taken to avoid contact with liq- aviation equipment. Consult with hospital
uid crystal. Take the urgent action indicated or airline staff before using the camera in a
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
should any of the following situations arise:
hospital or on an aircraft.
•
If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
If liquid crystal enters your eyes, flush the af-
fected eye with clean water for at least 15
minutes and then seek medical assistance.
If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Color Television Systems
Take Test Shots
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to en-
sure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
•
•
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with pho-
tographs is used for optimal color reproduc-
tion during printing.
Notes on Copyright
Unless intended solely for personal use, imag-
es recorded using your digital camera system
cannot be used in ways that infringe copy-
right laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, enter-
tainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Although the display is manufactured using
extremely high-precision technology, it may
contain pixels that are always lit or that do not
light. This is not a malfunction, and images re-
corded with the product are unaffected.
IMPORTANT NOTICE:
Read Before Using the Software
Direct or indirect export, in whole or in part,
of licensed software without the permission
of the applicable governing bodies is pro-
hibited.
Trademarkk Information
xD-Picture Card and E are trademarks
of FUJIFILM Corporation. The typefaces in-
cluded herein are solely developed by Dyna-
Comware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in
the U.S.A. and other countries. Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of com-
panies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Ado-
be Systems Incorporated in the U.S.A. and/or
other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned
in this manual are the trademarks or regis-
tered trademarks of their respective owners.
Haandling
To ensure that images are recorded correctly,
do not subject the camera to impact or physi-
cal shocks while images are being recorded.
viii
About This Manual
Before using the camera, read this manual and the warnings in“For Your Safe-
ty”(P ii). For information on specific topics, consult the sources below.
Table of Contents .............................Pxi Troubleshooting .......................... P112
The“Table of Contents”gives an over- Having a specific problem with the
view of the entire manual. The princi- camera? Find the answer here.
pal camera operations are listed here.
Warningg Messaggeess aanndd Displays ... P118
Find out what’s behind that flashing
icon or error message in the display.
Memoryy Caarrds
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and
SDXC memory cards (P12), referred to in this manual as“memory cards.”
Temperatture Warning
The camera will turn off automatically before its temperature or the temperature
of the battery rise above safe limits. Pictures taken when a temperature warning is
displayed may exhibit higher levels of“noise”(mottling). Turn the camera off and wait
for it to cool before turning it on again.
ix
Frequeently--Usseedd BBuuttttons
■ Turning the Caamera onn iin Playbaack Mode
y When the camera is
off, playback can be
■ Takiinngg PPictureess DDuurriinngg Playback
y To return instantly to shooting mode,
press the shutter button halfway.
started by pressing the
abutton for about a
second.
Shoot
View
■ Deletingg Pictures
■ Silent Mode
y To delete a picture,
display it full frame and
press the selector up (b).
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
x
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS..................................ii
Safety Notes....................................................................iv
About This Manual ...........................................................ix
Frequently-Used Buttons .................................................x
Moree oonn PPhotography
Shooting Mode................................................................22
E(EAUTO/EPriority).................23
R(EAUTO).................................................23
EPriority..........................................................24
Adv. ADVANCED ..........................................................25
r MOTION PANORAMA 360.......................................25
iPRO FOCUS...........................................................28
jPRO LOW-LIGHT....................................................29
n MULTIPLE EXPOSURE..............................................30
i INDIVID. SHUTTER 3D ..............................................31
SP SCENE POSITION.......................................................33
M MANUAL ...................................................................35
A APERTURE PRIORITY AE..............................................35
S SHUTTER PRIORITY AE ................................................36
P PROGRAM AE..............................................................36
Focus Lock........................................................................37
dExposure Compensation..........................................39
FMacro Mode (Close-ups) ...........................................40
NUsing the Flash (Super-Intelligent Flash) .................41
hUsing the Self-Timer .................................................43
bIntelligent Face Detection.......................................44
RContinuous Shooting ...............................................45
ITOP n.....................................................................46
PBEST FRAME CAPTURE...........................................47
OAE BKT ..................................................................49
XFILM SIMULATION BKT............................................49
YDYNAMIC RANGE BKT.............................................49
nFace Recognition......................................................50
Adding New Faces..........................................................50
Viewing, Editing, and Deleting Existing Data .................52
Adding Faces Automatically ...........................................52
Beforre You Begin
Symbols and Conventions.................................................1
Supplied Accessories.........................................................1
Parts of the Camera ..........................................................2
Camera Displays...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
First Steps
Charging the Battery ........................................................7
Inserting the Battery and a Memory Card.......................9
Compatible Memory Cards .............................................12
Turning the Camera on and Off ......................................14
Shooting Mode ..............................................................14
Playback Mode...............................................................14
Basic Setup ......................................................................16
Basic Photography and Playback
Taking Pictures in R(EAUTO) Mode.............17
Viewing Pictures .............................................................21
xi
Table of Contents
Moree oon Playback
Movies
Playback Options.............................................................54
Continuous Shooting......................................................54
IFavorites: Rating Pictures .........................................54
Playback Zoom...............................................................55
Multi-Frame Playback....................................................56
ADeleting Pictures......................................................57
bImage Search............................................................58
mPhotoBook Assist .....................................................59
Creating a PhotoBook.....................................................59
Viewing Photobooks ......................................................60
Editing and Deleting Photobooks...................................60
Viewing Panoramas ........................................................61
Viewing Photo Information............................................62
Recording Movies............................................................64
Movie Frame Size ...........................................................65
Viewing Movies ...............................................................66
Coonnnneections
Viewing Pictures on TV ...................................................67
Printing Pictures via USB................................................69
Printing the DPOF Print Order.........................................71
Viewing Pictures on a Computer....................................73
Windows: Installing MyFinePix Studio ...........................73
Macintosh: Installing FinePixViewer...............................76
Connecting the Camera..................................................78
xii
Table of Contents
Using the Menus: Playback Mode ..................................90
Using the F-Mode Menu .............................................90
F-Mode Menu Options ................................................90
mPHOTOBOOK ASSIST................................................90
ISLIDE SHOW ..........................................................90
Using the Playback Menu...............................................91
Playback Menu Options..................................................91
mPHOTOBOOK ASSIST................................................91
bIMAGE SEARCH ......................................................91
AERASE ...................................................................91
jMARK FOR UPLOAD TO............................................92
ISLIDE SHOW ..........................................................93
BRED EYE REMOVAL .................................................93
DPROTECT................................................................93
GCROP.....................................................................94
ORESIZE...................................................................94
CIMAGE ROTATE .......................................................95
ECOPY.....................................................................95
FVOICE MEMO .........................................................96
iERASE FACE RECOG.................................................96
KPRINT ORDER (DPOF)..............................................96
JDISP ASPECT..........................................................97
Menus
Using the Menus: Shooting Mode..................................81
Using the F-Mode Menu .............................................81
F-Mode Menu Options ................................................81
NISO........................................................................81
OIMAGE SIZE............................................................82
RCONTINUOUS.........................................................83
ZADVANCED ANTI BLUR ............................................83
PFILM SIMULATION ..................................................83
Using the Shooting Menu...............................................84
Shooting Menu Options .................................................84
AEMODE ....................................................84
AAdv. MODE ............................................................84
ASCENE POSITION.....................................................84
NISO........................................................................84
OIMAGE SIZE............................................................84
TIMAGE QUALITY .....................................................84
UDYNAMIC RANGE ...................................................85
PFILM SIMULATION ..................................................85
DWHITE BALANCE ....................................................86
yINTELLIGENT SHARPNESS........................................87
RCONTINUOUS.........................................................87
ZADVANCED ANTI BLUR ............................................87
bFACE DETECTION ....................................................87
CPHOTOMETRY ........................................................87
FAF MODE...............................................................88
nFACE RECOGNITION.................................................88
FMOVIE AF MODE ....................................................89
WMOVIE MODE.........................................................89
a STILL SHOOTING IN MOVIE ......................................89
JAE BKT EV STEPS....................................................89
xiii
Table of Contents
The Setup Menu ..............................................................98
Using the Setup Menu....................................................98
Setup Menu Options ......................................................99
FDATE/TIME ............................................................99
NTIME DIFFERENCE ...................................................99
Q a......................................................99
oSILENT MODE.........................................................99
RRESET..................................................................100
KFORMAT ..............................................................100
AIMAGE DISP. .........................................................100
BFRAME NO. ..........................................................101
GOPERATION VOL....................................................101
HSHUTTER VOLUME ................................................101
eSHUTTER SOUND..................................................102
IPLAYBACK VOLUME ..............................................102
JLCD BRIGHTNESS..................................................102
T MONITOR SUNLIGHT MODE ...................................102
N AUTO POWER OFF ................................................102
LDUAL IS MODE.....................................................103
BRED EYE REMOVAL ...............................................103
R INTELLIGENT DIGITAL ZOOM..................................104
CAF ILLUMINATOR ..................................................105
tSAVE ORG IMAGE .................................................105
mAUTOROTATE PB ...................................................105
O BACKGROUND COLOR............................................105
cGUIDANCE DISPLAY ..............................................105
QVIDEO SYSTEM.....................................................105
xPOWER MANAGEMENT.........................................106
UDATE STAMP ........................................................106
W START-UP SCREEN ................................................107
SWATERPROOF CASE ..............................................107
Techniccaall NNotes
Optional Accessories .....................................................108
Accessories from FUJIFILM............................................109
Caring for the Camera...................................................110
Storage and Use ...........................................................110
Cleaning.......................................................................111
Traveling ......................................................................111
Troubleshooting
Problems and Solutions................................................112
Warning Messages and Displays ..................................118
Appendix
Internal Memory/Memory Card Capacity....................122
Specifications ................................................................123
xiv
Before You Begin
Symbols andd Convventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in
this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
NP-50A recharge-
able battery
BC-45W battery
charger
USB cable
A/V cable
CD-ROM
(contains this
manual)
Attttaacchhiing the Strap
Attach the strap
as shown.
• Strap
• Basic Manual
1
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d(exposure compensation) button (P39)
b(delete) button (Px)
MENU/OK button
Move cursor left
F(macro) button (P40)
Move cursor right
N(flash) button (P41)
Command dial
Move cursor down
h(self-timer) button (P43)
* The illustrations in this manual have been simplified for explanatory purposes.
Before You Begin
2
Parts of the Camera
1 Shutter button.............................................................. 19 15 F(movie recording) button....................................... 64
2 ON/OFF button ............................................................. 14 16 Terminal cover ...................................................67, 69, 78
3 Flash............................................................................. 41 17 DC coupler cable cover ................................................ 109
4 Flash pop-up button..................................................... 41 18 F(photo mode) button .........................................81, 90
5 Lens and lens cover
6 AF-assist illuminator................................................... 105 19 DISP (display)/BACK button .....................................6, 16
Self-timer lamp ............................................................ 43
o(silent mode) button2 ................................................x
Monitor sunlight mode1.................................................. 6
7 Microphone (R)........................................................64, 96 20 Battery-chamber cover................................................... 9
8 Microphone (L) ........................................................64, 96 21 Tripod mount
9 Zoom control ...........................................................18, 55 22 Speaker....................................................................66, 96
10 LCD monitor.................................................................... 4 23 USB multi-connector .........................................67, 69, 78
11 a(playback) button .................................................. 21 24 Connector for HDMI cable ............................................. 68
12 Indicator lamp (see below)
25 Battery latch..............................................................9, 11
13 Mode dial...................................................................... 22 26 Battery chamber............................................................. 9
14 Strap eyelet .................................................................... 1 27 Memory card slot.......................................................... 10
1 Press and hold the Fbutton for monitor sunlight mode.
2 Press and hold the DISP/BACK button until ois displayed.
Thhee IInndicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glowwss ggrreen
Blinks green
Caammera sstatus
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glowwss oorraannggee
Blinks orange
Blinks red
Recording pictures. No additional pictures can be taken at this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
Before You Begin
3
Parts of the Camera
Camera Displays
The following types of indicator may be displayed during shooting and play-
back. Indicators vary with camera settings.
■ Shooting
11 Number of available frames........................................ 122
12 Sensitivity..................................................................... 81
13 Image size/quality...................................................82, 84
14 Dynamic range ............................................................. 85
15 Film simulation............................................................. 83
16 White balance............................................................... 86
17 Battery level ................................................................... 6
18 Dual IS mode .............................................................. 103
19 Blur warning..........................................................42, 118
20 Focus warning .......................................................19, 118
21 Exposure compensation................................................ 39
22 Aperture
1 Shooting mode............................................................. 22
2 Intelligent Face Detection indicator .............................. 44
3 Metering....................................................................... 87
4 Continuous shooting mode........................................... 45
5 Silent mode indicator ................................................3, 99
6 Focus frame .................................................................. 37
7 Temperature warning ................................................. 118
8 Internal memory indicator*
23 Shutter speed
24 Date and time............................................................... 16
25 Date stamp ................................................................. 106
26 Intelligent sharpness .................................................... 87
27 Waterproof case.......................................................... 107
28 Self-timer indicator ...................................................... 43
29 Macro (close-up) mode................................................. 40
30 Flash mode ................................................................... 41
9 Monitor sunlight mode................................................... 6
10 Movie mode.................................................................. 65
*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P10).
4
Before You Begin
Parts of the Camera
■ Playback
1 Playback mode indicator..........................................21, 54
2 Intelligent Face Detection indicator .........................44, 93
3 Red-eye removal indicator............................................ 93
4 Pro focus mode, pro low-light mode........................28, 29
5 Motion panorama z................................................. 61
6 3D image ...................................................................... 31
7 Gift image..................................................................... 54
8 Frame number............................................................ 101
9 Dynamic range ............................................................. 85
10 Emode............................................................. 23
11 Portrait enhancer.......................................................... 33
12 Mark for upload to........................................................ 92
13 Photobook assist........................................................... 59
14 Voice memo indicator................................................... 96
15 DPOF print indicator ..................................................... 71
16 Protected image ........................................................... 93
17 Favorites ....................................................................... 54
Before You Begin
5
Parts of the Camera
Batterryy LLevel
Battery level is shown as follows:
Indicator
Description
D(white)
C(white)
B(red)
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
A(blinks red) Battery exhausted. Turn camera off and charge battery.
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing/HD framing/histogram
• Playback:Indicatorsdisplayed/indicatorshidden/Ifavorites(P54)/photoinfo(P62)
Bright Ambient Lighting
Reflections and glare caused by bright ambient lighting may make it hard to see the
display in the monitor, particularly when the camera is used outdoors. This can be ad-
dressed by holding the Fbutton to trigger outdoor mode. Outdoor mode can also be
enabled using the T MONITOR SUNLIGHT MODE option in the setup menu (P102).
6
Before You Begin
First Steps
Chhaarrggiinngg the Batteerryy
The battery is not charged at shipment. Charge the battery before use.
Place the battery in the supplied battery charger.
Insert the battery in the orientation
1
Charge lamp
indicated by the DFC labels.
Battery
Arrow
The camera uses an NP-50A recharge-
able battery.
DFC
label
DFC label
Battery charger
Plug the charger in.
2
Plug the charger into an indoor power outlet. The charging indicator will
light.
Thhee CCharggiinngg IInnddicator
The charging indicator shows battery charge status as follows:
Charging indicator
Battery status
Battery not inserted.
Battery fully charged.
Battery charging.
Battery fault.
Action
Insert the battery.
Reemmoove the battery.
—
Unplug thhe chargeer and remmove the battery.
Off
On
Blinks
7
Charging the Battery
Charge the battery.
3
Remove the battery when charging is complete. See the specifications
(P127) for charging times (note that charging times increase at low tem-
peratures).
Q Unplug the charger when it is not in use.
8
First Steps
Innsseertinng the Baatttterryy aanndd aa MMemory Cardd
Although the camera can store pictures in internal memory, optional SD,
SDHC, and SDXC memory cards (sold separately) can be used to store addi-
tional pictures. After charging the battery, insert the battery and memory card
as described below.
Open the battery-chamber cover.
1
R Be sure the camera is off before opening
the battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to ob-
serve this precaution could result in dam-
age to image files or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
Insert the battery.
2
Orange stripe
Align the orange stripe on the battery with the orange
battery latch and slide the battery into the camera,
keeping the battery latch pressed to one side. Confirm
that the battery is securely latched.
Q Insert the battery in the correct orientation. Do NOT use
force or attempt to insert the battery upside down or
backwards. The battery will slide in easily in the correct
orientation.
Battery latch
First Steps
9
Inserting the Battery and a Memory Card
Insert the memory card.
3
Holding the memory card in the orientation shown at
right, slide it in until it clicks into place at the back of
the slot.
Click
Q Be sure card is in the correct orientation; do not insert at
an angle or use force. If the memory card is not correctly
inserted or no memory card is inserted, awill appear in
the LCD monitor and internal memory will be used for re-
cording and playback.
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
position.
Write-protect switch
Close the battery-chamber cover.
4
10
First Steps
Inserting the Battery and a Memory Card
R Using an AC Power Adapter
• The camera can be powered by an optional AC power adapter and DC coupler (sold
separately). See the manuals provided with the AC power adapter and DC coupler
for details.
• Depending on the country or region of sale, a demo mode slide show may start if
the camera is turned on while powered by an AC power adapter. Press the shutter
button to end the show.
Reemoving the Battery annd Memorry Caarrdd
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
First Steps
11
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-
proved for use in the camera. A complete list of approved memory cards is
available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q Memory Caarrds
• Do not turn the camera off or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see“KFORMAT” (P100).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD or high-speed movies.
12
First Steps
Inserting the Battery and a Memory Card
• The data in internal memory may be erased or corrupted when the camera is re-
paired. Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in
which pictures are stored. Do not rename or delete this folder or use a computer or
other device to edit, delete, or rename image files. Always use the camera to delete
pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in“The Battery and Power Supply”(Pvi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
First Steps
13
Turning the Camera on and Off
Shooting Mode
Playback Mode
Press the ON/OFF button to turn the To turn the camera on and begin
camera on. The lens will extend au- playback, press the a button for
tomatically.
about a second.
Press the a button again or press
the ON/OFF button to turn the camera
off.
Press ON/OFF again to turn the camera
off.
R Switching to Shooting Mode
R Switching to Playback Mode
To exit to shooting mode, press the shut-
ter button halfway. Press the a button
to return to playback.
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
14
First Steps
Turning the Camera on and Off
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for NAUTO POWER OFF (P102).
First Steps
15
Baassic SSetup
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the FDATE/TIME or Qa options in
the setup menu; for information on displaying the setup menu, see page 99).
Highlight a language and press MENU/OK.
1
ENGLISH
FRANCAIS
DEUTSCH
R Press DISP/BACK to skip the current step. Any steps you skip
ESPAÑOL
will be displayed the next time the camera is turned on.
PORTUGUÊS
The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
2
Power management options will be displayed. Press the selector up or
down to highlight one of the following options and then press MENU/OK:
• n POWER SAVE: Save battery power.
3
• o CLEAR DISPLAY: Choose for a brighter, higher quality display.
R Thhee CCamera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
16
First Steps
Basic Photography and Playback
Taking Pictures in R(EAUTO) Modde
This section describes how to take pictures in R(EAUTO) mode.
Select Emode.
Turn the camera on and rotate the mode dial to E. The Rdisplay
1
will appear in the LCD monitor.
The oIccoon
In Rmode, the camera continuously adjusts focus and searches for faces, in-
creasing the drain on the battery. ois displayed in the LCD monitor.
Scene IIcon (P23)
The camera automatically selects the appropriate scene.
R The camera analyses the scene and selects the preferred Emode when
the shutter button is pressed halfway (P24).
R To raise the flash when lighting is poor, press the flash pop-up button (P41).
17
Taking Pictures in R(EAUTO) Mode
Frame the picture.
Use the zoom control to frame the picture in the display.
2
Zoom indicator
Zoom out
Zoom in
Hoollddiinngg tthhee CCamera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (under-
exposed), keep your fingers and other objects away from
the lens and flash.
18
Basic Photography and Playback
Taking Pictures in R(EAUTO) Mode
Focus.
3
Press the shutter button halfway to focus.
Double
beep
R The lens may make a noise when the camera focuses;
this is normal. If the subject is poorly lit, the AF-assist
illuminatormaylight;see“CAFILLUMINATOR”(P 105)
for information on disabling the illuminator.
If the camera is able to focus, it will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame will turn red, swill be dis-
played, and the indicator lamp will blink green. Change the composition
or use focus lock (P37).
Basic Photography and Playback
19
Taking Pictures in R(EAUTO) Mode
Shoot.
4
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
Thhee SShhuuttter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
20
Basic Photography and Playback
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photo-
graphs, take a test shot and check the results.
Press the abutton.
The most recent picture will be displayed.
1
View additional pictures.
Press the selector right to view pictures in the order
2
recorded, left to view pictures in reverse order.
Press the shutter button to exit to shooting mode.
Basic Photography and Playback
21
More on Photography
Shhooottiinngg MMode
Choose a shooting mode according to the scene or type
of subject. To select a shooting mode, align the mode
icon with the mark next to the mode dial.
M, A, S, P: Select for full control over camera settings
(P35), includingaperture(MandA)and/orshutterspeed
(M and S).
E: Improve clarity, reduce
noise, increase dynamic range,
or let the camera automatically
adjust settings to suit the scene
(P23).
SP (SCENE POSITION): Choose
a
scene suited to the subject or
shooting conditions and let the
camera do the rest (P33).
B (AUTO): A simple “point-and-
shoot” mode recommended for
first-time users of digital cameras.
Adv. (ADVANCED): Sophisticated techniques made easy
(P25).
22
Shooting Mode
E(EAUTO/EPriority)
Optimize settings for your current subject or improve clarity, reduce
noise, or enhance dynamic range. Rotate the mode dial to E
and choose one of the following E modes in the shooting
menu.
■ R(EAUTO)
The camera automatically selects the scene and E
mode according to shooting conditions (P17).
R If S is selected for OIMAGE SIZE in Rmode, the camera
will automatically select the optimal image size.
R R INTELLIGENT DIGITAL ZOOM is restricted to 2× (P104).
Scene icon
The Scene Icon
The camera selects from the following scenes:
Scene
LAND-
NIGHT
GREEN- SKY &
AUTO SCAPE NIGHT (TRIPOD) MACRO BEACH SUNSET SNOW SKY ERY GREENERY
Main suubject
Noon-portrait
d*
dc dd* dh*
e
—
—
u
v
w
x
y
z
h*
a
c
Noormal
d
du dv dw dx dy
dz
gz
cz
az
bz
Portrait
Backlit g gc
—
—
gu gv gw gx gy
Moving object
Portrait and
motion
c
a
b
cc cd ch ce cu cv cw cx cy
Noormal
Backlit
ac ad ah
bc
—
—
au av aw ax ay
—
—
bu bv bw bx by
* If nis displayed, the camera will take a series of shots (advanced anti-blur; P24).
Q The mode selected may vary with shooting conditions. If the mode and subject do not match,
select Bmode (P22) or choose SP (P33) and select a scene manually.
More on Photography
23
Shooting Mode
Advanced Anti Blur
When nis displayed, the camera will take a series of exposures and combine them
to form a single image, reducing“noise”(mottling) and blur.
R nis available when ON is selected in the shooting menu (P83) and the flash
(P41) is off or set to auto.
Q Some time may be required to combine the exposures into a single image. A
single combined image may not be created if the subject or camera moves dur-
ing shooting. Keep the camera steady during shooting and do not move the
camera until shooting is complete.
Q Frame coverage is reduced.
The EIcon
When the shutter button is pressed halfway, the camera chooses the pre-
ferred Emode:
• S(RESOLUTION PRIORITY): Produces crisp, clear shots.
• T(HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.
• U(D-RANGE PRIORITY): Increases the amount of detail visible in highlights.
■ EPriority
Select this mode to manually choose from the following Emodes:
• S(RESOLUTION PRIORITY): Choose for crisp, clear shots.
• T(HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.
• U(D-RANGE PRIORITY): Increase the amount of detail visible in highlights.
UDYNAMIC RANGE (P85) can be set to Z (1600%) and Y (800%).
24
More on Photography
Shooting Mode
Adv. ADVANCED
This mode combines “point-and-shoot” simplicity with sophisti-
cated photographic techniques. The AAdv. MODE option in
the shooting menu can be used to choose from the following ad-
vanced modes:
■ r MOTION PANORAMA 360
Follow an on-screen guide to take photos that will au-
tomatically be joined to form a panorama. The camera
zooms all the way out and remains fixed at the widest
angle until shooting is complete.
To select the angle through which you will pan the camera while shoot-
ing, press the selector down. Press the selector left or right to highlight an
1
angle and press MENU/OK.
Press the selector right to view a choice of pan directions. Press the selec-
tor left or right to highlight a pan direction and press MENU/OK.
2
Press the shutter button all the way down to start recording. There is no
need to keep the shutter button pressed during recording.
3
More on Photography
25
Shooting Mode
Pan the camera in the direction shown by the arrow.
Shooting ends automatically when the progress bar is
full and the panorama is complete.
4
R Shooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120°.
Progress bar
Q Panoramas are created from multiple frames. The camera may in some cases record
an greater or lesser angle than selected or be unable to stitch the frames together
perfectly. The last part of the panorama may not be recorded if shooting ends be-
fore the panorama is complete.
Q Shooting may be interrupted if the camera is panned too quickly or too slowly. Pan-
ning the camera in a direction other than that shown cancels shooting.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
26
More on Photography
Shooting Mode
z
Choose zfor seamless 360 ° panoramas that can be played back in a loop (P 61).
R The tSAVE ORG IMAGE option in the setup menu can be used to record a v
panorama in addition to a seamless zpanorama (P105).
Q Depending on the subject and shooting conditions, the camera may produce
distorted results or a v panorama. The top and bottom of the area visible in
the shooting display are cropped out and white strips may appear at the top and
bottom of the display.
For Besst Results
For best results, move the camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in the direction shown by the
guides. If the desired results are not achieved, try panning at a different speed.
More on Photography
27
Shooting Mode
■ iPRO FOCUS
The camera takes up to three shots each time the shutter
button is pressed, softening the background to emphasize
the main subject. The amount of softening can be adjusted
before shooting by pressing the selector left or right. Use
for portraits or photos of flowers similar to those produced
by SLR cameras.
R Softening can not be applied to background objects that are too close to the main
subject. If a message stating that the camera can not create the effect is displayed
when the camera focuses, try backing away from your subject and zooming in. The
camera may also be unable to soften the background if the subject is moving; if
prompted, check the results and try again.
28
More on Photography
Shooting Mode
■ jPRO LOW-LIGHT
Each time the shutter button is pressed, the camera makes
four exposures and combines them into a single photo-
graph. Use to reduce noise and blur when photographing
poorly lit subjects or static subjects at high zoom ratios.
R A single combined photograph may not be created with some
scenes or if the subject or camera moves during shooting. Do not move the camera
until shooting is complete.
PRO FOCUS/PRO LOW-LIGHT
To save unprocessed copies of pictures taken in these modes, select ON for the
tSAVE ORG IMAGE option in the setup menu (P105).
Q Keep the camera steady during shooting.
Q Frame coverage is reduced.
More on Photography
29
Shooting Mode
■ n MULTIPLE EXPOSURE
Create a photograph that combines two exposures.
Take the first shot.
1
Press MENU/OK. The first shot will be shown superimposed on the view
through the lens as a guide to taking the second shot.
2
R To return to Step 1 and retake the first shot, press the selector left. To save the
first shot and exit without creating a multiple exposure, press DISP/BACK.
Take the second shot.
3
4
Press MENU/OK to create the multiple exposure, or press the selector left to
return to Step 3 and retake the second shot.
30
More on Photography
Shooting Mode
■ i INDIVID. SHUTTER 3D
Take two shots from different angles to create a 3D image.
To choose the order in which the pictures are taken,
1
press the selector right to display the current order and
then press the selector left or right to choose from the
options below.
G: Take the left shot first.
H: Take the right shot first.
Press the shutter button to take the first shot.
2
R To exit without recording a picture, press DISP/BACK.
The first shot will be shown superimposed on the view through the lens.
Using it as a guide, frame the second shot and press the shutter release
button.
3
R The 3D effect may not be visible with some sub-
jects or under some shooting conditions. For
best results, the distance the camera is moved
/
/
between shots should be about 1 30th to 1 50th of
the distance to the subject.
R The camera will turn off automatically if no operations performed for the time
selected for NAUTO POWER OFF (P102).The first shot will not be saved if the
second shot is not taken before the camera turns off.
More on Photography
31
Shooting Mode
Viewing and Printing 3D Images
• The camera displays images in 2D. Press the selector down to toggle between the
first and second shots.
• Devices equipped for 3D display, such as the FINEPIX REAL 3D V3 digital photo frame or
FINEPIX REAL 3D W3 digital camera, will display the images in 3D.
• 3D prints can be ordered from http://www.fujifilm.com/3d/print/
• The supplied software displays 3D anaglyph images. 3D photos can also be viewed
using other applications that support the MP format.
• 3D TVs that support the MP format can display images in 3D. See the manual for
your TV for details.
Q Images are not output in 3D when printed directly from the camera.
Q 3D images are displayed in 2D in slide shows and when output on a conventional
TV.
Q 3D images can not be edited or retouched.
Note: The MP (Multi-Picture) format is a CIPA standard for files containing multiple still images. Files
in MP format are referred to as “MP files” and have the extension “*.MPO”. The camera uses this
format for 3D images.
32
More on Photography
Shooting Mode
SP SCENE POSITION
The camera offers a choice of “scenes,” each adapted to particular
shooting conditions or a specific type of subject. Use the ASCENE
POSITION option in the shooting menu to choose the scene as-
signed to the SP position on the mode dial.
Scene
Description
CNATURAL & N The camera takes two shots: one without the flash and one with.
DNATURAL LIGHT Capture natural lighting under low-light conditions.
h PORTRAIT
Choose for portraits.
Z PORTRAIT
Choose for a smooth skin effect when shooting portraits.
ENHANCER
l DOG
Choose when photographing dogs.
mCAT
Choose when photographing cats.
MLANDSCAPE
NSPORT
O NIGHT
Choose for daylight shots of buildings and landscapes.
Choose when photographing moving subjects.
Choose this mode for poorly lit twilight or night scenes.
HNIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night.
Slow shutter speeds are used to capture the expanding burst of light from
a firework.
p FIREWORKS
QSUNSET
RSNOW
s BEACH
Choose this mode to record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes dominat-
ed by shining white snow.
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
More on Photography
33
Shooting Mode
Scene
Description
Choose for when using an optional waterproof case to take photographs
underwater.
f UNDERWATER
U PARTY
V FLOWER
WTEXT
Capture indoor background lighting under low-light conditions.
Choose for vivid close-ups of flowers.
Take clear pictures of text or drawings in print.
l DOG/mCAT
The camera focuses on the faces of dogs or cats that are facing the camera, and the
self-timer menu offers a nAUTO RELEASE option that releases the shutter auto-
maticallywhenapetisdetected(P43). Duringplayback,imagesearch(P58)canbe
used to search for pictures taken in either mode.
R Although camera can detect many different breeds of dogs and cats, results may
vary with the breed and shooting conditions. The camera may fail to detect pets
with dark-colored faces or long hair covering their entire face. If a dog or cat is not
detected, the camera focuses on the subject at the center of the frame.
34
More on Photography
Shooting Mode
M MANUAL
In this mode, you control both shutter speed and aperture.
Press the selector up (d) to highlight shutter speed or
aperture and use the command dial to adjust the high-
lighted item. If desired, exposure can be altered from the
value selected by the camera.
Thhee EExposuree IInnddicator
The amount the picture will be under- or over-exposed at cur-
rent settings is shown by the exposure indicator.
A APERTURE PRIORITY AE
You choose the aperture using the command dial, while the camera
adjusts shutter speed for optimal exposure.
Q If the correct exposure can not be achieved at the selected
aperture, shutter speed will be displayed in red. Adjust aper-
ture until the correct exposure is achieved. If the subject is
outside the metering range of the camera, the shutter speed
F3.5
display will show “---”. Press the shutter button halfway to
measure exposure again.
More on Photography
35
Shooting Mode
S SHUTTER PRIORITY AE
You choose the shutter speed using the command dial, while the
camera adjusts aperture for optimal exposure.
Q If the correct exposure can not be achieved at the selected
shutter speed, aperture will be displayed in red. Adjust shut-
ter speed until the correct exposure is achieved. If the subject
is outside the metering range of the camera, the aperture
1000
display will show “F---”. Press the shutter button halfway to
measure exposure again.
P PROGRAM AE
The camera sets exposure automatically.
Q If the subject is outside the metering range of the camera, the shutter speed and
aperture displays will show“---”. Press the shutter button halfway to measure expo-
sure again.
36
More on Photography
Focus Lock
To compose photographs with off-center subjects:
Focus: Position the subject in the focus frame (
)
1
2
3
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
Recompose: Keep the button pressed halfway.
Shoot: Press the button all the way down.
More on Photography
37
Focus Lock
Autoffocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Subjects that show little contrast with the background
• Fast-moving subjects.
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
• Insubstantial subjects, such as smoke or flame.
subject photographed against a backdrop of highly con-
trasting elements).
38
More on Photography
dExposure Coompeenssaation
To adjust exposure compensation when photographing
very bright, very dark, or high-contrast subjects, press
the selector up (d). Press the selector up or down or
use the command dial to choose an exposure compen-
sation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A dicon and exposure indicator are displayed at settings other than 0. Exposure
compensation is not reset when the camera is turned off; to restore normal expo-
sure control, choose a value of 0.
R Turn the flash off when using exposure compensation.
More on Photography
39
FMaacroo Mooddee ((CClloossee--uups)
For close-ups, press the selector left (F) and select F.
When macro mode is in effect, the camera focuses on
subjects near the center of the frame. Use the zoom
control to compose pictures (P18).
P
To exit macro mode, press the selector left (F) and select
OFF
MACRO
OFF.
Close-up shots
R Use of a tripod is recommended to prevent blur caused by camera shake.
R The shadow cast by the lens may appear in photographs taken with the flash at
very short ranges. Zoom out or increase the distance to the subject.
40
More on Photography
NUsing the Flashh ((SSuupper-Intelliigent Flash)
When the flash is used, the camera’s Super-Intelligent Flash system instantly
analyzes the scene based on such factors as the brightness of the subject,
its position in the frame, and its distance from the camera. Flash output and
sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit
indoor scenes. Use the flash when lighting is poor, for example when shoot-
ing at night or indoors under low light.
Press the flash pop-up button to raise the flash.
1
R If playback is in progress, return to shooting mode be-
fore raising the flash.
Press the selector right (N) and choose from the fol-
lowing flash modes:
2
Option
Description
The flash fires when required. Recommended in most
situations.
AUTO/K*
The flash fires whenever a picture is taken. Use for back-
N/L* lit subjects or for natural coloration when shooting in
bright light.
Capture both the main subject and the background
O/M* under low light (note that brightly lit scenes may be
overexposed).
* Jicon indicates that Intelligent Face Detection and red-eye removal are on and will be used
to minimize “red-eye” caused by the flash reflecting from the retinas of portrait subjects.
More on Photography
41
NUsing the Flash (Super-Intelligent Flash)
R The flash is automatically lowered when the camera is turned off .
R Lower the flash where flash photography is prohibited or to capture natural lighting
under dim light.
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.
At slow shutter speeds, kwill appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
42
More on Photography
hUsing thee Selff-Timer
To use the self-timer, press the selector down (h) and
choose from the following options:
P
OFF
OFF
Option
T(OFF)
Description
Self-timer off.
The shutter is released automatically when the camera detects the face of a cat
or dog (P34).
n( AUTO RELEASE)
The shutter is released automatically when the camera detects a human portrait
subject facing the camera. Use for portraits of babies.
o( AUTO RELEASE)
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera lights when the
timer starts and begins to blink shortly before the photo is taken.
S(10 SEC)
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter button is pressed.
The self-timer lamp will blink as the timer counts down.
R(2 SEC)
More on Photography
43
bInnttelligent Facce Deteeccttiioonn
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK to dis-
play the shooting menu and select ON for bFACE
DETECTION. Faces can be detected with the camera
in vertical or horizontal orientation; if a face is detected,
it will be indicated by a green border. If there is more
than one face in the frame, the camera will select the
face closest to the center; other faces are indicated by
white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
44
More on Photography
RContinuouus Shhooooting
To capture motion in a series of pictures, press MENU/OK,
select RCONTINUOUS in the shooting menu (P87),
and choose from the options listed in this section.
Option
P
OAE BKT
(P49)
(P49)
(P49)
(P46)
(P47)
—
XFILM SIMULATION BKT
YDYNAMIC RANGE BKT
I TOP n
PBEST FRAME CAPTURE
OFF
R The flash turns off automatically. The previously selected flash mode is restored
when OFF is selected for RCONTINUOUS.
R Frame rate varies with shutter speed.
R Focus and exposure are determined by the first frame in each series.
R The number of pictures that can be taken in a single burst varies with the scene
and camera settings. The number of pictures that can be recorded depends on the
memory available.
More on Photography
45
RContinuous Shooting
■ ITOP n
The camera takes photographs while the shutter button is pressed. To choose
the frame rate:
Press the selector right when the camera is in shooting
mode.
1
Press the selector up or down to choose a frame rate
and press MENU/OK to select and return to shooting
mode.
2
46
More on Photography
RContinuous Shooting
■ PBEST FRAME CAPTURE
The camera takes a series of pictures, starting before and ending after the
shutter button is pressed.
Press the selector right when the camera is in shooting mode.
1
Highlight the current frame rate and press the selector right, then press
selector up or down to choose a new value and press MENU/OK to select.
2
Q Some frame rates may reduce the number of shots available.
Shots per burst
Highlight the number of shots and press the selector
right. Press the selector up or down to choose the num-
ber of shots in each burst and left or right to choose
3
their distribution (the number on the left is taken before
and the number on the right after the shutter button
is pressed). Press MENU/OK when settings are complete
and press DISP/BACK to return to shooting mode.
Distribution
More on Photography
47
RContinuous Shooting
Take photographs. The camera begins recording while the shutter button
4
is pressed halfway, and completes the burst when the shutter button is
pressed all the way down. The illustration shows a burst of eight shots,
three before the shutter button is pressed and four after.
Shutter button
pressed halfway
Shutter button pressed all
the way down
“Before” shots
“After” shots
Q If the shutter button is pressed all the way down before the number of frames
selected for the“before”portion is recorded, the remaining frames will be taken
after the shutter button is pressed all the way down.
Q If the shutter button is pressed halfway for an extended period, the camera may
record the burst before the shutter button is pressed all the way down.
48
More on Photography
RContinuous Shooting
■ OAE BKT
Each time the shutter button is pressed, the camera takes three shots: one us-
ing the metered value for exposure, the second overexposed by the amount
selected for JAE BKT EV STEPS in the shooting menu (P89), and the third
underexposed by the same amount (the camera may not be able to use the
selected bracketing increment if the amount of over- or under- exposure ex-
ceeds the limits of the exposure metering system).
■ XFILM SIMULATION BKT
Each time the shutter button is pressed, the camera takes one shot and pro-
cesses it to create three copies with different PFILM SIMULATION settings
(P83): cPROVIA/STANDARD for the first, dVelvia/VIVID for the second,
and eASTIA/SOFT for the third.
■ YDYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots at differ-
entUDYNAMICRANGEsettings(P85):V100%forthefirst,W200%for
the second, and X400% for the third (NISO can not exceed 3200; values
less than 400 are not available when O is selected for OIMAGE SIZE).
More on Photography
49
nFace Recognnition
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait sub-
jects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Follow the steps below to add faces to the face recognition database.
Select REGISTER.
Select REGISTER for nFACE RECOGNITION in the shooting menu.
1
R To disable face recognition, select OFF.
Take a photograph.
After checking that the subject is facing the camera,
2
frame the subject using the guides and take the pho-
tograph.
R If an error is displayed, take the photograph again.
50
More on Photography
nFace Recognition
Enter face recognition data
Press MENU/OK to display face recognition data and enter the following in-
3
formation:
• NAME: Enter a name of up to 14 characters and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
• CATEGORY: Choose the option that describes your relationship to the sub-
ject and press MENU/OK.
R If you attempt to zoom in on the face of a person indicated by a green border
in the face recognition database on their birthday, the camera will display their
name and the message“Happy Birthday!”
More on Photography
51
nFace Recognition
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete face recognition data.
Select VIEW & EDIT for nFACE RECOGNITION.
1
2
3
Select a face.
View or edit face recognition data.
The name, category, or birth date can be edited as described in Step 3 of
“Adding New Faces”(P51). To retake the photo, select REPLACING IMAGE
and shoot a new portrait as described above.
R To delete face recognition data for the selected subject, select ERASE.
Adding Faces Automatically
To automatically add frequently-photographed subjects to the face recogni-
tion database, select ON for AUTO REGISTRATION in the face recognition
menu. If the camera detects a face that has been photographed many times
without being added to the database, it will display a message prompting you
to create a new face recognition entry. Press MENU/OK and enter face recogni-
tion data.
R The camera may sometimes fail to recognize new faces automatically. If necessary,
faces can be added manually using the REGISTER option.
52
More on Photography
nFace Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a confir-
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
WhenIntelligentFaceDetection(P44)isonandtheframecontainsmultiplesubjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identified using face rec-
ognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
Q The camera may fail to identify subjects in the face recognition database if they
are not facing the camera or are only partly in the frame, or if details of the sub-
jects’faces or expressions differ markedly from those in the database.
More on Photography
53
More on Playback
Playback OOpptions
To view the most recent picture in the LCD monitor, press the abutton.
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during
playback.
Continuous Shooting
In the case of pictures taken in continuous shooting mode, only the first frame
of each series will be displayed. Press the selector down to view the other
pictures in the series.
IFavorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
54
Playback Options
Playback Zoom
Select ito zoom in on pictures displayed in single-frame playback; select
jto zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R Rotate the command dial to view other pictures without changing the zoom ratio.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
More on Playback
55
Playback Options
Multi-Frame Playback
Selecting jwhen a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select jto increase the number of images displayed to two, nine, or one
hundred, ito view fewer images.
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
56
More on Playback
ADeleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
AERASE (P91), and choose from the options
below. Note that deleted pictures can not be re-
covered. Copy important pictures to a computer or other storage device before
proceeding.
Option
FRAME
Description
Press the selector left or right to scroll through pictures and press MENU/OK to delete
the current picture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks
SELECTED or print orders are shown by S). When the operation is complete, press DISP/BACK
FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the
selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all
unprotected pictures (if a memory card is inserted, only the pictures on the memory
ALL FRAMES card will be affected; the pictures in internal memory are only deleted if no memory
card is inserted). Pressing DISP/BACK cancels deletion; note that any pictures deleted
before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P93).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
More on Playback
57
bImmaage SSearch
Search for pictures.
Select bIMAGE SEARCH in the playback menu (P91), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
1
• BY FACE: Search for faces from the face recognition database.
• BY IFAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures or all movies.
• BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-
nation.
Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose AERASE (P91),
DPROTECT (P93), or ISLIDE SHOW (P90).
2
58
More on Playback
mPhotooBBoook Assist
Create books from your favorite photos.
Creating a PhotoBook
Select NEW BOOK for mPHOTOBOOK ASSIST in the playback menu
(P90) and choose from the following options:
1
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P58).
R Movies, 3D photos, and photographs a or smaller can not be selected for pho-
tobooks.
Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
2
3
R The first picture selected becomes the cover image. Press the selector down to
select a different image for the cover.
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-
ing the specified search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
More on Playback
59
mPhotoBook Assist
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be dis-
played; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in“Creating a PhotoBook”(P59).
• ERASE: Delete the book.
Photoobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-
ware.
60
More on Playback
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right or from bottom to top. To
pause playback, press the selector down; press the selector down again to
resume. To exit to full-frame playback, press the selector up while panorama
playback is in progress. Once displayed in full-frame playback, panoramas can
be zoomed in or out using the zoom control or deleted by pressing the selec-
tor up (b).
R zpanoramas play back in an endless loop (P 27); the playback direction can be
controlled by pressing the selector left or right. The camera will not turn off auto-
matically while playback is in progress (P 102).
More on Playback
61
Viewiing Phootoo IInformation
Photo information can be viewed by pressing DISP/BACK to cycle through indi-
cators (P6) until the following display appears:
Dynamic range
Sensitivity
Film simulation
Exposure compensation
Picture (overexposed areas blink on and off)
Histogram
Image size and quality
Shutter speed/aperture
q
e
t
i
!
!
w
r
y
Flash mode
White balance
u
Frame number
o
Histoograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
Shadows Highlights
Optimal exposure: Pixels are distributed in an even
curve throughout the tone range.
Overexposed: Pixels are clustered on the right side of
the graph.
Underexposed: Pixels are clustered on the left side of
the graph.
62
More on Playback
Viewing Photo Information
Zoooommiinngg iinn oonn tthe Focus Point
Press the selector down to zoom in on the focus point. Press
DISP/BACK or MENU/OK to return to full-frame playback.
More on Playback
63
Movies
Recordiinngg MMoviess
Press Fto shoot a movie. During recording, the following indica-
tors will be displayed and sound will be recorded via the built-in
microphone (be careful not to cover the microphone during re-
cording).
yREC icon
Number of photos that
can be taken during
recording
Time remaining
To end recording, press the Fbutton again. Recording ends automatically
when the movie reaches maximum length or memory is full.
R Zoom can be adjusted while recording is in progress.
R If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.
To turn the AF-assist lamp off, select OFF for CAF ILLUMINATOR in the setup
menu (P105).
R Focus, exposure, and white balance are adjusted automatically throughout record-
ing. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
64
Recording Movies
Takiinngg Photographs DDuriinngg RReecorrding
Press the shutter button to take a photograph during recording.
R See page 89 for information on choosing how photographs are recorded.
R The photo is saved separately from the movie and does not appear as part of the movie.
Q Photos can not be taken while a high-speed movie is being recorded.
Q The number of photos that can be taken is limited.
Q The indicator lamp lights while movies are being recorded. Do not open the bat-
tery chamber during shooting or while the indicator lamp is lit. Failure to observe
this precaution could prevent the movie from being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an ex-
tended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Before recording, select a frame size using the WMOVIE MODE option in the
shooting menu (P89).
Option
Description
i1920 (1920 × 1080) Full HD (High Definition).
h1280 (1280 × 720) High Definition.
f( 640 × 480)
Standard definition.
k640 × 480 (80 fps)
High speed movie. Sound is not recorded, and focus, exposure, and white
k320 × 240 (160 fps) balance are not adjusted automatically. Black bands appear at the top and
bottom of movies recorded at k320 × 112.
k320 × 112 (320 fps)
Movies
65
Viewing Movvies
100-006
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be per-
formed while a movie is displayed:
12/31/2050 10:00 AM
Option
Description
Press the selector down to start playback. Press again to
pause. While playback is paused, you can press the selec-
tor left or right to rewind or advance one frame at a time.
Start/pause
playback
End playback/
delete
Press the selector up to end playback.
Press the selector left or right to adjust playback speed dur-
ing playback.
Adjust speed
Press MENU/OK to pause playback and display volume con-
trols. Press the selector up or down to adjust the volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
Adjust volume
Playbacck Speed
Arrow
Press the selector left or right to adjust playback speed. Speed is
shown by the number of arrows (Mor N).
Q Do not cover the speaker during playback.
66
Movies
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
Turn the camera off.
1
Connect the supplied A/V cable as shown below.
2
Connect yellow plug to video-in jack
Insert into
USB multi-connector
Connect white plug to audio-in jack
R Image quality drops during movie playback.
67
Viewing Pictures on TV
Coonnnneeccttiinngg tthhee CCamera to High Definition (HD) TVs
An HDMI cable (available from third-party suppliers) can be used to connect the
camera to High Definition (HD) devices (playback only). The USB and A/V cables
can not be used while an HDMI cable is connected.
Insert into HDMI connector
Insert into HDMI
connector
HDMI mini connector
R When an HDMI cable is connected, pictures and sound are played back on the TV.
Q When connecting cables, be sure the connectors are fully inserted.
Tune the television to the video or HDMI input channel. See the documen-
tation supplied with the television for details.
3
4
Press the abutton for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
68
Connections
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connect the supplied USB cable as shown and turn the printer on.
1
Turn the camera on.
2
Press the selector left or right to display a picture you wish to print.
3
Press the selector up or down to choose the number of copies (up to 99).
4
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
5
Connections
69
Printing Pictures via USB
Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera off and then on
again.
6
After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB csable.
7
R Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printinng thee DDaattee ooff RReecoorrding
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE). Some printers do not support
date printing. See the printer manual for details.
70
Connections
Printing Pictures via USB
Printing the DPOF Print Order
The KPRINT ORDER (DPOF) option in the playback menu can be used to
create a digital“print order”for PictBridge-compatible printers (P108) or de-
vices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from“print orders”stored in internal memory or on a memory card.
The information in the order includes the pictures to be printed and the
number of copies of each picture.
Select playback mode and press MENU/OK to display the playback menu.
1
2
3
Highlight KPRINT ORDER (DPOF) and press MENU/OK.
Highlight one of the following options and press MENU/OK:
• WITH DATE s: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
Press the selector left or right to display a picture you wish to add to or
remove from the print order.
4
Connections
71
Printing Pictures via USB
Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when
settings are complete.
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Remove the memory card to create or modify a print order for the pictures in
internal memory.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
72
Connections
Viewingg Picturreess oonn aa CCoommppuutter
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
Confirm that the computer meets the following system requirements:
1
Windowws 7 (SP 1)/Windowss VViisstta (SP 2) 1
Windowws XP (SP 3) 1
3GHz Pentium 4 or better
2GHz Pentium 4 or better
CPU
(2.4GHz Core 2 Duo or better)2
(2.4GHz Core 2 Duo or better)2
512MB or more
(1GB or more)2
RAM
Free disk space
GPU
1GB or more
2GB or more
Supports DirectX 9 or later
Supports DirectX 7 or later
(requiired;; pperforrmance not guaranteeed withh otheerr GPUss)
(recommended)
Video
1,024×768 pixels or more with 24-bit color or better
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
• .NET Framework 3.5 Service Pack 1 required when uploading images or us-
ing Map Viewer.
Other
• Internet connection (broadband recommended) required to install
.NET Framework (if necessary), to use auto update feature, and when per-
forming such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
Connections
73
Viewing Pictures on a Computer
Start the computer. Log in to an account with administrator privileges be-
fore proceeding.
2
Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
3
Windoows 7/Wiindows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A“User Account Control”dia-
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio.
If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
74
Connections
Viewing Pictures on a Computer
If prompted to install Windows Media Player or DirectX, follow the on-
screen instructions to complete installation.
4
5
Remove the installer CD from the CD-ROM drive when installation is com-
plete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to“Connecting the Camera”(P78).
Connections
75
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Confirm that the computer meets the following system requirements:
1
CPU
PowerPC or Intel (Core 2 Duo or better)*
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
com/support/digital_cameras/compatibility/ for more information). Mac OS X
version 10.7 and later not supported.
OS
RAM
Free disk space
Video
256MB or more (1GB or more)*
A minimum of 200MB required for installation with 400MB available when
FinePixViewer is running
800×600 pixels or more with thousands of colors or better
Built-in USB port recommended. Operation is not guaranteed with other USB
ports.
Other
* Recommended when displaying HD movies.
After starting the computer and quitting any applications that may be run-
ning, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
76
Connections
Viewing Pictures on a Computer
Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
4
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in
the When a camera is connected, open menu, then select FPVBridge
in the“Applications/FinePixViewer”folder and click Open. Quit Image Cap-
ture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to“Connecting the Camera”(P78).
Connections
77
Viewing Pictures on a Computer
Connecting the Camera
If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
1
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to internal
memory or the memory card. Charge the battery before connecting the camera.
Turn the camera off and connect the supplied USB cable as shown, mak-
ing sure the connectors are fully inserted. Connect the camera directly to
the computer; do not use a USB hub or keyboard.
2
Press the abutton for about a second to turn the camera on and follow
the on-screen instructions to copy pictures to the computer. To exit with-
3
out copying pictures, click Cancel.
78
Connections
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress and that the indicator lamp is out before turning the camera off or discon-
necting the USB cable (if the number of images copied is very large, the indicator
lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to internal
memory or the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet ser-
vice provider when using services that require an Internet connection.
Connections
79
Viewing Pictures on a Computer
Disconnecting thhee CCamera
After confirming that the indicator lamp is out, turn the camera off and disconnect
the USB cable.
Uninstalling the Supplied Softtwwaarree
Only uninstall the supplied software when it is no longer required or before begin-
ning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features”(Windows 7/Windows Vista) or“Add or Remove Programs”(Windows XP) to
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may
be displayed; read the contents carefully before clicking OK.
80
Connections
Menus
Using the MMenus: Shhoooottiinngg MMode
Use the F-mode and shooting menus to adjust shooting settings. The op-
tions available vary with the shooting mode selected.
Using the F-Mode Menu
To display F-mode menu shooting options, press the
Fbutton in shooting mode. Highlight items and press
the selector right to view options, then highlight an op-
tion and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete.
F-Mode Menu Options
NISO
(defaults to AUTO)
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-
tling may appear in pictures taken at high sensitivities.
100
Bright
ISO
Scene
12800
Dark
Less noticeable
Nooiissee ((mmottling)
More noticeable
Option
Description
Sensitivity is adjusted automatically in response to shooting conditions.
AUTO (3200) / AUTO (1600) / As above, except that sensitivity will not be raised above the value in
AUTO
AUTO (800) / AAUTO (400)
parentheses.
12800 / 6400 / 3200 / 1600 /
800 / 400 / 200 / 100
Sensitivity is set to the specified value, which is shown in the display.
81
Using the Menus: Shooting Mode
OIMAGE SIZE
(defaults to O 4:3)
Choose the image size and aspect ratio at which pictures are record-
ed. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
O4 : 3
Size Aspect ratio
Size Versus Aspect Ratio
Size
Option
O
Prints at sizes up to
34×25cm (13.5×10in.)
P
24×18cm (9.5×7in.)
17×13cm (7×5in.)
Q
Aspect ratio
4 : 3: Pictures have the same 3 : 2: Pictures have the same 16 : 9: Suited for display on
proportions as the camera
display.
proportions as a frame of
35mm film.
High Definition (HD) devices.
3
2
9
4
3
16
82
Menus
Using the Menus: Shooting Mode
RCONTINUOUS
(defaults to OFF)
Caappttuurree mmootion in a series of pictures (P45).
ZADVANCED ANTI BLUR
(defaults to ON)
Select ON to enable advanced anti blur in Rmode (P24).
PFILM SIMULATION
(defaults to c)
Simulate the effects of different types of film, including sepia and black-and-white.
Option
Description
Standard color reproduction. Suited to a wide range of subjects, from
portraits to landscapes.
cPROVIA/STANDARD
dVelviaa/VIVID
eASTIA/SOFT
bB&W
A high-contrast palette of saturated colors, suited to nature photographs.
A soft-toned palette of less saturated colors.
Take pictures in black and white.
fSEPIA
Take pictures in sepia.
Menus
83
Using the Menus: Shooting Mode
Using the Shooting Menu
To display the shooting menu, press MENU/OK in shooting
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Shooting Menu Options
AEMODE
(defaults to R)
(defaults to r)
(defaults to h)
Choose an option for Emode (P23).
AAdv. MODE
Choose an advanced shooting mode (P25).
ASCENE POSITION
Choose a scene for SP mode (P33).
NISO
(defaults to AUTO)
(defaults to O 4:3)
(defaults to F)
Control the camera’s sensitivity to light (P81).
OIMAGE SIZE
Choose image size and aspect ratio (P82).
TIMAGE QUALITY
Choose how much image files are compressed.
Option
Description
FINE
NORMAL
Low compression. Select for higher image quality.
High compression. Select this option to store more pictures.
84
Menus
Using the Menus: Shooting Mode
UDYNAMIC RANGE
(defaults to AUTO)
Control contrast. Higher values are recommended for scenes that include both sunlight and
deep shade or for increased contrast with such subjects as sunlight on water, brightly-lit autumn
leaves, portraits taken against a blue sky, and white objects or people wearing white; note, how-
ever, that mottling may appear in pictures taken at higher values. If AUTO is selected, the camera
will automatically select values between 100% and 400% in response to shooting conditions.
Option
Description
V100% Increase contrast when shooting indoors or under overcast skies.
AUTO
W200%
X400%
Y800%
Z1600%
Reduce loss of detail in highlights and shadows when photographing
high-contrast scenes.
R Z1600% and Y800% are available only when D-RANGE PRIORITY is selected in E
mode and an option other than dVelvia/VIVID or eASTIA/SOFT is selected for PFILM
SIMULATION.
PFILM SIMULATION
(defaults to c)
Simulate the effects of different types of film (P83).
Menus
85
Using the Menus: Shooting Mode
DWHITE BAALLANCE
(defaults to AUTO)
If AUTO does not produce natural colors (for example, when taking close-ups), select hand
measure a value for white balance or choose the option that matches the light source.
Option
AUTO
h
Description
White balance adjusted automatically.
Measure a value for white balance.
For subjects in direct sunlight.
i
j
For subjects in the shade.
k
Use under“daylight”fluorescent lights.
Use under“warm white”fluorescent lights.
Use under“cool white”fluorescent lights.
Use under incandescent lighting.
For underwater photography
l
m
n
g
h: Custom White Balance
Choose hto adjust white balance for unusual lighting conditions. White balance measure-
ment options will be displayed; frame a white object so that it fills the display and press the
shutter button all the way down to measure white balance.
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (P39) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
R For greater precision, adjust PFILM SIMULATION, NISO, and UDYNAMIC RANGE
before measuring white balance.
R At settings other than h, auto white balance is used with the flash.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the display.
86
Menus
Using the Menus: Shooting Mode
yINTELLIGENT SHARPNESS
(defaults to OFF)
Select ON to process photos digitally for sharp, super high-resolution results.
R The time needed to record images increases.
R The effects are not visible in the display during shooting.
R Intelligent sharpness may turn off automatically in some modes.
R This option has no effect on photos taken in continuous mode.
RCONTINUOUS
(defaults to OFF)
Caappttuurree mmootion in a series of pictures (P45).
ZADVANCED ANTI BLUR
(defaults to ON)
Select ON to enable advanced anti blur in Rmode (P24).
bFACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human por-
trait subjects (P44).
CPHOTOMETRY
(defaults to o)
Choose how the camera meters exposure when Intelligent Face Detection is off.
Option
oMULTI
Description
Automatic scene recognition is used to adjust exposure for a wide range of
shooting conditions.
The camera meters lighting conditions at the center of the frame. Recom-
mended when the background is much brighter or darker than the main
subject.
pSPOT
Exposure is set to the average for the entire frame. Provides consistent expo-
sure across multiple shots with the same lighting, and is particularly effective
for landscapes and portraits of subjects dressed in black or white.
qAVERAGE
Menus
87
Using the Menus: Shooting Mode
FAF MODE
This option controls how the camera selects the focus area for photographs. Regardless of the
option selected, the camera will focus on the subject in the center of the frame when macro
mode is on.
Option
rCENTER
Description
The camera focuses on the subject in the center of the frame.
When the shutter button is pressed halfway, the camera detects high-contrast
subjects near the center of the frame and selects the focus area automatically.
sMULTI
The camera continuously adjusts focus to reflect changes in the distance to
the subject in the focus frame.
Position the subject in the center focus area and press the selector left. Focus
will track the subject as it moves through the frame.
uCONTINUOUS
xTRACKING
R Note that in uand xmodes, the camera focuses continuously, increasing the drain on the
battery, and that the sound of the camera focusing may be audible.
R If a face is detected when u is selected, a o icon will be displayed and the camera will
continuously adjust focus to maintain focus on the face.
nFACE RECOGNITION
Add portrait subjects to the face recognition database. These subjects will be given priority
during Intelligent Face Detection, and their names and other information can be viewed during
playback (P53).
88
Menus
Using the Menus: Shooting Mode
FMOVIE AF MODE
This option controls how the camera selects the focus area for movies.
(defaults to r)
Option
rCENTER
Description
The camera focuses on the subject in the center of the frame.
The camera continuously adjusts focus to reflect changes in the distance to
subjects near the center of the frame.
uCONTINUOUS
R Note that in umode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
WMOVIE MODE
(defaults to i)
Choose a frame size for movies (P64).
aSTILLL SHOOOTTING INN MOVIE
(defaults to MOVIE PRIORITY)
Choose how the camera records photographs taken during movie recording(P65).
Option
Description
The camera takes a photograph without interrupting movie recording.
Image size is determined by the option selected for WMOVIE MODE.
MOVIE PRIORITY
The camera interrupts filming to take the photograph and resumes film-
ing automatically when recording is complete. Image size is determined
by the option selected for OIMAGE SIZE, but note that the photograph
will be recorded at size Pif Ois selected.
STILL IMAGE PRIORITY
JAE BKT EV STEPS
(defaults to 1/3)
Choose the size of the exposure bracketing increment used when OAE BKT is selected for
/
/
RCONTINUOUS. Select from increments of +1 3EV, +2 3EV, and +1EV (note that the camera
may not be able to use the selected bracketing increment if the amount of over- or under- expo-
sure exceeds the limits of the exposure metering system).
Menus
89
Using the MMenus: Playbbaacckk MMode
The F-mode and playback menus are used to manage the pictures in inter-
nal memory or on the memory card.
Using the F-Mode Menu
To display F-mode menu playback options, press the
Fbutton in playback mode. Highlight items and press
the selector right to view options, then highlight an op-
tion and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete.
F-Mode Menu Options
mPHOTOBOOK ASSIST
Create books from your favorite photos (P59).
ISLIDEE SHOW
(defaults to MULTIPLE)
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
Description
NORMAL
FADE-IN
Press selector left or right to go back or skip ahead one frame. Select
FADE-IN for fade transitions between frames.
NORMAL g
FADE-IN g
MULTIPLE
As above, except that camera automatically zooms in on faces selected
with Intelligent Face detection.
Display several pictures at once.
R The camera will not turn off automatically while a slide show is in progress.
90
Menus
Using the Menus: Playback Mode
Using the Playback Menu
To display the playback menu, press MENU/OK in playback
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Playback Menu Options
mPHOTOBOOK ASSIST
Create books from your favorite photos (P59).
bIMAGE SEARCH
Search for pictures (P58).
AERASE
Delete all or selected pictures (P57).
Menus
91
Using the Menus: Playback Mode
jMARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
■ Selecting Pictures for Upload
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
2
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are indicated by jYouTube or jFACEBOOK icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer”(P73).
92
Menus
Using the Menus: Playback Mode
ISLIDEE SHOW
(defaults to MULTIPLE)
View pictures in an automated slide show (P90).
BRED EYEE REMOVAL
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-
eye is detected, the image will be processed to create a copy with reduced red-eye.
Display the desired picture.
1
Select BRED EYE REMOVAL in the playback menu.
2
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in profile.
Results may differ depending on the scene. Red eye can not be removed from pictures that
have already been processed using red-eye removal or pictures created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with BRED EYE REMOVAL are indicated by a eicon during playback.
DPROTECT
Protect pictures from accidental deletion.
Select DPROTECT in the playback menu.
1
2
Highlight one of the following options and press MENU/OK:
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card or internal memory is formatted
(P100).
Menus
93
Using the Menus: Playback Mode
GCROP
Create a cropped copy of the current picture.
Display the desired picture.
1
Select GCROP in the playback menu.
2
3
Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
Press MENU/OK to display a confirmation dialog.
4
5
Press MENU/OK again to save the cropped copy to a separate file.
R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. If the size of the final
copy will be a, OK will be displayed in yellow.
ORESIZE
Create a small copy of the current picture.
Display the desired picture.
1
Select ORESIZE in the playback menu.
2
3
4
Highlight a size and press MENU/OK to display a confirmation dialog.
Press MENU/OK to save the resized copy to a separate file.
R The sizes available vary with the size of the original image.
94
Menus
Using the Menus: Playback Mode
CIMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
Display the desired picture.
1
Select CIMAGE ROTATE in the playback menu.
2
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-
wise.
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
4
R Protected pictures can not be rotated. Remove protection before rotating pictures (P93).
R The camera may not be able to rotate pictures created with other devices.
ECOPY
Copy pictures from internal memory to a memory card.
Select ECOPY in the playback menu.
1
2
Highlight one of the following options and press the selector right:
• aINTERNAL MEMORY y bCARD: Copy pictures from internal memory to a memory card.
• bCARD y aINTERNAL MEMORY: Copy pictures from a memory card to internal memory.
Highlight one of the following options and press MENU/OK:
• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press
MENU/OK to copy the current picture.
3
• ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P71).
Menus
95
Using the Menus: Playback Mode
FVOOIICCE MEMO
Add a voice memo to the current photograph. Holding the camera at a distance of about 20 cm,
face the microphone and press MENU/OK to begin recording. Press MENU/OK again to end record-
ing (recording ends automatically after 30 seconds).
R Voice memos can not be added to movies or protected pictures. Remove protection from
pictures before recording voice memos.
R If a voice memo already exists for the current picture, the options will be displayed. Select
RE-REC to replace the existing memo.
Playiing Vooice Memos
Pictures with voice memos are indicated by a q icon during playback. To play the voice
memo back, select PLAY for FVOICE MEMO in the playback menu.
R The camera may not play voice memos recorded with other devices.
R Do not cover the speaker during playback.
iERASE FACE RECOG.
Remove face recognition links from the current image. When this option is selected, the cam-
era will zoom in on an area in the current picture that it has matched with a face in the face
recognition database. If the match is not correct, press MENU/OK to remove the link to the face
recognition database.
R Face recognition links can not be removed from copies with a size of aor smaller.
KPRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P71).
96
Menus
Using the Menus: Playback Mode
JDISP ASPECT
Choose how High Definition (HD) devices display pictures with an aspect ratio of 4:3 (this option
is available only when an HDMI cable is connected). Select 16 : 9 to display the image so that it
fills the screen with its top and bottom cropped out, 4 : 3 to display the entire image with black
bands at either side.
16 : 9
4 : 3
16 : 9
4 : 3
R Photographs with an aspect ratio of 16:9 are displayed full screen, those with an aspect ratio
of 3:2 in a black frame.
Menus
97
The Setup MMenu
Using the Setup Menu
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current
1
mode.
1.2 Press the selector left to highlight the tab for the
current menu.
1.3 Press the selector down to highlight X.
EXIT
Tab
1.4 Press the selector right to place the cursor in the setup menu.
Adjust settings.
2
Highlight items and press the selector right to view options, then high-
light an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
98
Menus
The Setup Menu
Setup Menu Options
FDATE/TIME
Set the camera clock (P16).
NTIME DIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destina-
tion when traveling. To specify the difference between local time and your home time zone:
Highlight g LOCAL and press the selector right.
Use the selector to choose the time difference between local time and your home time zone.
Press MENU/OK.
1
2
3
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
h HOME
Description
Switch to the time currently selected for FDATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
g LOCAL
Qa
Choose a language.
oSILENT MODE
(defaults to OFF)
Select ON to disable the speaker, flash, and AF-assist illuminator in situations in which camera
sounds or lights may be unwelcome (note that the flash will still fire in Cmode).
Menus
99
The Setup Menu
RRESET
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,
and QVIDEO SYSTEM to default values.
Highlight RRESET and press the selector right to display a confirmation dialog.
1
2
Highlight OK and press MENU/OK.
KFORMAT
If a memory card is inserted in the camera, this option will format the memory card. If no mem-
ory card is inserted, this option will format internal memory.
Q All data—including protected pictures—will be deleted from the memory card or internal
memory. Be sure important files have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
AIMAGE DISP.
(defaults to 1.5 SEC)
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
Description
3 SEC
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
1.5 SEC
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.
OFF
Pictures are not displayed after shooting.
100
Menus
The Setup Menu
BFRAME NO.
(defaults to CONT.)
New pictures are stored in image files named using a four-digit file num-
ber assigned by adding one to the last file number used. The file num-
ber is displayed during playback as shown at right. BFRAME NO. con-
Frame number
100-0001
trols whether file numbering is reset to 0001 when a new memory card Directory
File
is inserted or the current memory card or internal memory is formatted. number
number
Option
Description
Numbering continues from the last file number used or the first available file
number, whichever is higher. Choose this option to reduce the number of
pictures with duplicate file names.
CONTINUOUS
Numbering is reset to 0001 after formatting or when a new memory card is
inserted.
RENEW
R If the frame number reaches 999-9999, the shutter release will be disabled (P120).
R Selecting RRESET (P100) sets BFRAME NO. to CONTINUOUS but does not reset the file
number.
R Frame numbers for pictures taken with other cameras may differ.
GOPERATTIONN VVOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
HSHUTTEER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)
to disable the shutter sound.
Menus
101
The Setup Menu
eSHUTTER SOUND
Choose the sound made by the shutter.
(defaults to i)
(defaults to 7)
IPLAAYYBBAACCKK VVOLUME
Adjust the volume for movie and voice memo playback.
JLCD BRIGHTNESS
(defaults to 0)
Control the brightness of the display.
TMONITOR SUNLIGHT MODE
(defaults to OFF)
Select ON to make the display in the monitor easier to read in bright light (P6).
NAUTO PPOWER OFF
(defaults to 2 MIN)
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
102
Menus
The Setup Menu
LDUAL IS MODE
(defaults to L)
Choose from the following image stabilization options:
Option
Description
Image stabilization on. If + MOTION is selected, the camera will ad-
just shutter speed to reduce motion blur when a moving objects
are detected.
L CONTINUOUS + MOTION
l CONTINUOUS
M SHOOTING + MOTION
m SHOOTING ONLY
OFF
As above, except that image stabilization is performed only when
the shutter button is pressed halfway or the shutter is released.
Image stabilization off. Choose this option when using a tripod.
R + MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable
at some other combinations of settings. The effect may vary with lighting conditions and the
speed at which the object is moving.
BRED EYEE REMOVAL
(defaults to ON)
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face
Detection.
R Red-eye reduction is performed only when a face is detected.
Menus
103
The Setup Menu
RINTELLIGENT DIGITAL ZOOM
(defaults to ON)
If ON is selected, selecting iat the maximum optical zoom position triggers intelligent digital
zoom, further magnifying the image while processing it for sharp, high-resolution results.
Thhe Zoooomm IInnddicattoor
j
j
i
INTELLIGENT DIGITAL
ZOOM on
Optical zoom
Optical zoom
Intelligent
digital zoom
i
INTELLIGENT DIGITAL
ZOOM off
R Selecting another mode may end intelligent digital zoom and restore maximum optical
zoom.
R In Rmode, the camera will match the Emode to the scene for zoom ratios of up to
30× when combined with optical zoom.
R Intelligent digital zoom may sometimes produce lower quality images than optical zoom.
R The time needed to record images increases.
R The effects are not visible in the display during shooting.
R Intelligent digital zoom is not available in continuous mode or during movie recording.
104
Menus
The Setup Menu
CAF ILLUMINATOR
(defaults to ON)
If ON is selected, the AF-assist illuminator will light to assist autofocus.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the cam-
era is unable to focus in macro mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
tSAVE ORG IMAGE
(defaults to OFF)
Choose ON to save unprocessed copies of seamless z panoramas or pictures taken using
BRED EYE REMOVAL, jPRO LOW-LIGHT MODE, or iPRO FOCUS MODE.
mAUTOROTATE PB
(defaults to ON)
Choose ON to automatically rotate“tall”(portrait-orientation) pictures during playback.
OBACKGROUNND COLOORR
Choose a color scheme.
cGUIDANCE DISPPLLAY
(defaults to ON)
Choose whether to display tool tips.
QVIDEO SYSTEM
Choose a video mode for connection to a TV.
Option
Description
Select this mode for connection to video devices in North America, the Carib-
bean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
NTSC
PAL
Menus
105
The Setup Menu
xPOWER MANAGEMENT
(defaults to n)
Optimize camera performance for increased battery life or display quality.
Option
Description
Reduces display refresh rate. The display dims to save power if no operations
n POWER SAVE are performed for a short period, but can be restored by operating camera
controls. Select this option to save power.
Choose this option for a brighter, higher quality display and for a longer delay
before the monitor dims to save power.
o CLEAR DISPLAY
R n POWER SAVE does not take effect when Intelligent Face Detection is on.
UDATE SSTAMP
(defaults to OFF)
Stamp the time and/or date of recording on photographs as they are taken.
Option
R+S
R
Description
Stamp new photographs with the date and time of recording.
Stamp new photographs with the date of recording.
Do not stamp the time and date on new photographs.
OFF
Q Time and date stamps can not be deleted. Turn UDATE STAMP off to prevent time and date
stamps appearing on new photographs.
Q If the camera clock is not set, you will be prompted to set the clock to the current date and
time (P16).
Q We recommend that you turn the DPOF “print date” option off when printing images with a
time and date stamp (P71).
Q Time and date stamps do not appear on movies, panoramas, or 3D photos.
106
Menus
The Setup Menu
WSTARTT--UUPP SCREEN
(defaults to OFF)
Choose whether the camera displays a splash screen at startup.
SWATERPROOF CASE
(defaults to WHEN NOT USE)
Select WHEN USE when using the camera with an optional waterproof case. The lens will remain
extended when the camera is turned off.
R If you will be using the flash under water, raise it before selecting WHEN USE.
R The lens and flash will not retract during playback while WHEN USE is selected.
R Select WHEN NOT USE when the camera is not in a waterproof case. Failure to observe this
precaution could result in product malfunction.
Exposurre
Exposure can not be adjusted if mode M is selected when the camera is in a waterproof case.
In modes S and A, exposure can be adjusted by pressing the selector up to display exposure
options. You can then press the selector left or right to choose shutter speed or aperture and
up or down to adjust exposure compensation.
Menus
107
Technical Notes
Oppttiioonnaall AAcccesssoories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
■ Printing
■ Digital viewer
DIGITAL CAMERA
Supports 3D display of
pictures taken using
INDIVD. SHUTTER 3D.
FINEPIX F660EXR
USB cable
(supplied)
FINEPIX REAL 3D V3 (sold separately)
PictBridge-compatible
printer*
SD/SDHC/SDXC
memory card
■ Audio/Visual
A/V cable (supplied)
TV*
Printer*
HDMI cable
(sold separately)
HDTV*
■ Coommpputer Reellatteedd
USB cable (supplied)
■ 3D print
SD card slot or card reader
Photos taken in INDIVD. SHUTTER 3D.
http://fujifilm.com/3d/print/
Computer*
* Available separately.
108
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the lat-
est information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
NP-50: Additional large-capacity NP-50 rechargeable bat-
Recharggeeable
teries can be purchased as required. Note that the NP-50
Li-ion batteries
may record fewer photos per charge than the NP-50A.
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-50A/NP-50 bat-
tery in about 150 minutes at +20°C (+68°F).
Battery
chargers
AC-5VX (requires CP-50 DC coupler): Use for extended playback or
when copying pictures to a computer (shape of adapter
and plug vary with region of sale).
AC power
adapters
DC couplers
CP-50: Connect the AC-5VX to the camera.
Waterrproof
case
WP-FXF500: Allows the camera to be used at depths of up
to 40 m (131 ft.).
Digital viewer FINEPIX REAL 3D V3: View 3D images without 3D glasses.
Technical Notes
109
Caring for the Camera
To ensure continued enjoyment of the product, observe the following pre-
cautions.
Storage and Use
If the camera will not be used for an ■ Water and Sand
extended period, remove the battery Exposure to water and sand can also
and memory card. Do not store or damage the camera and its internal
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
circuitry and mechanisms. When us-
ing the camera at the beach or sea-
side, avoid exposing the camera to
• exposed to direct sunlight or very water or sand. Do not place the cam-
high temperatures, such as in a era on a wet surface.
closed vehicle on a sunny day
■ Condensation
• extremely cold
Sudden increases in temperature,
• subject to strong vibration
such as occur when entering a heated
• exposed to strong magnetic fields,
building on a cold day, can cause con-
such as near a broadcasting anten-
densation inside the camera. If this
na, power line, radar emitter, motor,
occurs, turn the camera off and wait
transformer, or magnet
an hour before turning it on again. If
• in contact with volatile chemicals
condensation forms on the memory
such as pesticides
card, remove the card and wait for the
• next to rubber or vinyl products
condensation to dissipate.
110
Technical Notes
Caring for the Camera
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-
cleaning fluid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
Technical Notes
111
Troubleshooting
Problems and Solutions
Power and Battery
Problem
Solution
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).
• Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P9).
• Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chhaambbeerr ccoovveerr ((P9).
• Thhee AAC power adapter and DDC coupleer aarre connnected iincorrectly: Reconnect the AC power
adapter and DC coupler.
The cameraa does noot
turn on.
• Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert
it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.
• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.
• oCLEAR DISPPLLAY is selected for xPOWER MANAGEMENT: Select nPOWER
SAVE to reducee the ddrainn oon the batttery ((P106).
The battery runs down • ON is selected for TMONITOR SUNLIGHT MODE: Select OFF to reduce the
quickly.
drain on the battery (P6).
• Ris seleected foor shootting moodde: Select Bmode to reduce the drain on the battery (P22).
• uCONTINUOUS or xTRACKING is selected for FAF MODDE: Sellect a ddiiff-
ferent AF modde (P88).
• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging
life. Purchase a new battery.
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).
• Thhee AACC power adapter or DC coupleer has beeen discconnectteedd: Reconnect the AC power
adapter and DC coupler.
The cameraa turns ooff
suddenly.
112
Problems and Solutions
Problem
Solution
Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P7).
Charging is slow.
Charge the battery at room temperaturre (Pvi).
• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.
• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
• Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to stabillize (P7).
The charging lamp lights,
but the battery does not
charge.
Menus and Displays
Problem
Solution
Menus and displays are
not inn English.
Select ENGLISH for Qa (P16, 99).
Shooting
Problem
Solution
• Memory is full: Insert a new memory cardd or deeletee ppictures (P10, 57).
• Memory is not formatted: Format the memory caard or iinterrnnal memory (P100).
• Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.
• Thhee memory cardd iiss ddaamaged: Insert a new memory card (P10).
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).
• Thhee ccaamera has turned off aautomatically: Turn the caamera oon (P14).
• Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until
the indicattor lammpps turnss off (P3).
Noo ppiiccture is taken when
the shutter button is
pressed.
The LCD monitor goes
dark aftter shhooting.
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P41).
3D imagges doo nnot turrn out
as expected.
Use a trripodd oor change thhe disstanccee the caammeerraa iiss mmoovveedd bbeettwweeeenn tthhee fifirrsstt aanndd sseeccoonndd sshhoottss ((P31)
Troubleshooting
113
Problems and Solutions
Problem
Solution
• Thhee ssuubbjjeecct is close to the camera: Select macro mode (P40).
• Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P40).
• Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P37).
The cameraa does noot
focus.
If Sis seleected fforr OIMAGE SIZE inn Rmode, thee caammera wwiill ooptimiize not onnly sensi-
tivity and other settings, but also image ssiizzee.. To rreeccoorrdd aallll ppiiccttuurreess aatt tthhee ssaammee ssiizzee,, cchhoooossee aannootthheerr
shootiing moddee or seleect anoother ooptionn ffor OIMAGE SIZE (P82).
Pictures are not the
same size.
Macro mode is not
available.
Choose a different shooting mode (P22).
Intelligent Face Detection Inteelligeent Facce Detteectionn is nott availlablee iinn tthhee ccuurrrrentt shootting mmoode: Choose a differ-
is not available.
ent shooting mode (P22).
• Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove
the obsttructions.
• Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that
the subject’s face occupiees a laarrger area off the frame (P37).
Noo fface is detected.
• Thhee ssuubbjjeecct’s head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.
• Thhee ccaamera is tilted: Keep the camera leevel (P18).
• Thhee ssuubbjjeecctt’’ss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.
Wrong subject is
selected.
The selected subject is closer to the center of the frame than the main subject. Recompose tthhee
picture or turn face detection off and frame the picture using focuus lockk (P37).
• Thhee flflaasshh iiss nnoott available in the curreenntt sshooting mode: Choose a different shooting mode
(P22).
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).
• Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P45).
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P99).
• Thhee flflaasshh iiss nnot raised: Raise the flash (P41).
The flash does not fire.
114
Troubleshooting
Problems and Solutions
Problem
Solution
• Thhee ddeessireedd flflaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrreenntt sshhoooottiinngg mmooddee: Choose a different
shooting mode (P22).
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P99).
Some flash modes are
not available.
• Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P125).
• Thhee flflaasshh wwiinndow is obstructed: Hoolldd tthhee ccamera correctly (P18).
• Fast shutter speed selected: Choose a slower shutter speed (P35, 36).
The flash does not fully
light the subject.
• Thhee lleennss iiss ddiirrtty: Clean the lens (P111).
• Thhee lleens is blocked: Keep objects away from the lens (P18).
• sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus
before shooting (P118).
• kis displayed during shooting: Use the flash or a tripod (P42).
• A slow shuutter speeed is sseelleecctteedd aatt hhiigghh tteemmppeerraattuurress: This is normal and does not indi-
cated a maalfunction.
Pictures are blurred.
Pictures are mottled.
• Thhee ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouuslyy at high temperattureess oorr aa tteemmppeerraattuurree wwaarrnn--
ing is displayed: Turn the camerra off annd waitt for itt to cooll down.
Power waas interrrupted during shooting. Beffore connecting the AC power adapter or DC coupler,
Pictures are not recorded. turn the camera off. Leaving the camera on caann rreessuulltt iinn ccoorrupted files or damage to the memmoorryy
card oor intteernal memory.
• uCONTINUOUS is selected for FMOVIE AF MODE: Select a different AF mode
(P89).
• Zoooomm wwaass aaddjjusted during shootting: Do not adjust zoom during shooting.
• Intelligent Face Detection is on: Turn Intelligent Face Detection off (P44).
Sounds made by the
camerra aree rrecorded with
movies.
Troubleshooting
115
Problems and Solutions
Playback
Problem
Solution
Pictures are grainy.
The pictures were taken with a differentt mmaakkee oorr mmooddeell ooff ccamera.
• Playback volume is too low: Adjust playback volume (P102).
• Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P18, 41).
• Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P66).
Noo ssoouund in movie
playback.
Selected pictures are not Some of the pictures selected foorr ddeelleettiioonn aarree pprrootteecctteedd.. RReemmoovvee pprrootteeccttiioonn uussiinngg tthhee ddeevviiccee wwiitthh
deleted.
which it was originally applied (P93).
File numbering is
The batteery-chamber cover was opened whiile the caammeerraa wwaass oonn.. TTuurrnn tthhee ccaammeerraa ooffff bbeeffoorree
unexpectedly reset.
opening thhe baatttteerryy-chamberr ccoovveerr ((P14).
Connections/Miscellaneous
Problem
Solution
• Thhee ccaamera is not prooppeerrlly connectedd: Connect the cameraa properrly (P67).
• An A/V cabble was connected during movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--
back has ended.
Noo ppiiccture or sound.
• Input on the television is set to “TV”: Set input to “VIDEO”.
• Thhee camera is not sett to tthhee ccoorrrrect viiddeeoo ssttaannddaarrd: Match the camerra QVIDEO SYS-
TEM setting to the TV (P105).
• Thhee vvoolume on the TV is too low: Adjust the volume.
Noo coolor
Match the cammera QVIDEO SYSTEM setting to the TV (P105).
The computer does not
recognize the camera.
Be sure the cameraa and coomputter aree correctly connected (P78).
Can not trransfer RAW or
JPEG files to computer.
Use the bundled softtwwaarree ttoo ttrraannssffer piccturees (P73).
116
Troubleshooting
Problems and Solutions
Problem
Solution
Pictures caan not bbe
printed.
• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P69).
• Thhee pprrinter is off: Turn the printer on.
Only one copy is printed/
the date is not printed.
The printer is not PictBriidge commpatible.
• Temporary ccameraa mmalfuncction: Remove and reinsert the battery (P9) or disconnect and
reconnect the AC power adapter/DC coupler.
• Thhee bbaatttery is exhausted: Charge the battery (P7) or iinsert a ffully-charged spare bbattery
(P9).
The cameraa is unree-
sponsive.
The cameraa does noot
function as expected.
Remove and reinsert the battery (P99) or discconnect annd reconnnect the AACC ppoowweerr addapter/DC
coupler. If the problem persists, contact your FUJIFILM dealer.
I wantt to usee aann AACC ppoowweerr
adapter and DC coupler
overseas.
Check the llaabbeell on the AC power adapter. The AC power addapter caann bbee uusseedd wwiitthh vvoollttaaggeess ooff
100 – 2400V. Conssult youur travveel agentt for infformation on plug adapters.
Noo sound.
Turn silent mode off (P99).
Hue or content of display
changes unexpectedly.
Choose OFF for TMONITOR SUNLIGHT MODE (P6).
• Tiimmee aanndd ddaattee ssttaammppss aarre nott correct: Set the cammera cloock (P16).
• Tiimmee aanndd ddaate staamps appeear on photographs:Time and date stamps caan not be ddeleted. To
prevent stamps appearing on new phootographs, select OFFfor UDATTE STAMP(P106).
Time and date stamps
FinePixViewer can not
be installed or does not
start.
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applicattions suupplied
with Mac OS X or purchase other softtware.
The lens does not retract
when the cammera is
turned off.
Select WHEN NOT USE for SWATERPROOF CASE (P107).
Troubleshooting
117
Warning Messages and DDissplays
The following warnings are displayed in the LCD monitor:
Warning
B(red)
A(blinks red)
k
Description
Low batttery. Charge the battery (P7) or iinsert aa fullyy-charged spare battery (P9).
Battery eexhausteed. Charge the battery (P7) or inseert a fullly-charged spare battery (P9).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:
• Use fooccuss lock to focus on annother suubject at the same distance, then recompose the picture
(P37).
s
(displayed in red with red
focus frame)
• Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P40).
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. IIff tthhee ssuubbjjeecctt
displayed in red
is dark, use the flash (P41).
FOCUS ERROR
TURN OFF THE CAMERA Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,
AND TURN ON AGAIN takiinngg ccare not to touch the lens. If the message persists, contact a FUJIFILM dealer.
LENS CONTRROL ERROOR
• Thhee mmemory cardd oorr iinntteerrnnal memory is not formmatted orr thhee mmeemmoorryy ccaarrdd was foorr--
matted in a computer or other device: Format the memory card orr internal memory using
the KFORMAT option in the camerra setup mmenu (P100).
• Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff
CARD NOT INITIALIZED
the message is repeated, format the card (P100). If the message persists, replacee tthhee ccard.
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.
PROTECTED CARD
BUSY
The memory caard is locked. Unlock the ccard (P10).
The memory caard is inccorrecttlly formatted. Use the cameera to foorrmat the caard (P100).
Turn the caammeerraa ooffff and waait for it to coool. If no accttion iss takeen, the caammeerraa wwiillll ttuurrnn ooffff aauuttoo--
matically.
p
118
Troubleshooting
Warning Messages and Displays
Description
Warning
The memory card iss not formatted for use in the camera. Format the cardd (P100).
The memory caard contaacts require cleaning or the memoryy ccard is damaged. Clleeaann tthhee ccoonnttaaccttss
withasoftt,,ddrryyccllootthh.. IIfftthheemmeessssaaggeeiissrreeppeeaatteedd,,fformatttheccaarrdd((P1000). Iffthemeessaggeepersiists,
replace the card.
CARD ERROR
Incompatible memory card. Usse a compatible card (P12).
Camera malfunction. Contact a FUJIFILM dealer.
aMEMORY FULL
bMEMORY FULL
INTERNAL MEMORY IS
FULL
The memory carrd or intteernal memmory is full and pictures caan not be rrecorded or copied. Delete
pictures or insert a memory caard withh more free space.
INSERT A NEEW CARD
• Memory caard erroorr oorr ccoonnnneeccttiioonn eerrrroorr: Reinsert tthhee ccard oorr ttuurrnn tthhee ccaammeerraa ooffff aanndd tthheenn
on again. If the message persists, contact a FUJIFILM dealer.
• Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert
a memory cardd with moore freee space.
• Thhee memory cardd oorr iinntteernal memory is not fformattted: Format the memory card or
internal memory (P100).
• Thhee fifillee iiss ccoorrupt or was not creeaatteedd with the camera: The file can nnot be viiewed.
• Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff
the message is repeated, format the card (P100). If the message persists, replacee tthhee ccard.
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.
WRITE ERROR
READ ERROR
Troubleshooting
119
Warning Messages and Displays
Warning
Description
The camerra has run out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee
memory carrd and sselect RENEW for BFRAME NO. TTake a picture to reset frame num-
bering to 100-0001, then select CONTINUOUS for BFRRAME NO. (P101).
FRAME NO. FULL
PRESS AND HOLD
THE DISP BUUTTON TO
DEACTIVATE SILENT MODE
An attempt was made to choose a flash mode or aadjust the volume witth the caammeerraa iinn ssiilleenntt
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P99).
• A search has reettuurrnneedd mmoorree tthhaann 3300,,000000 rreessuullttss: Choose a search that retuurns fewer
results.
TOO MANY FRAMES
•
Moree tthan 999 images aree sseelleeccted for deletion: Choose feewwer images.
An aatttteemmpptt wwaass mmaaddee ttoo ddeelleettee,, rroottaattee,, oorr aadddd aa vvooiiccee mmeemmoo ttoo aa pprrootteecctteedd ppiiccttuurree.. RReemmoovvee
protection and try again (P93).
PROTECTED FRAME
aCAN NOT CROP
CAN NOT CROP
apictures can nott be croopped.
The picture is damaged or was not createedd wwiitthh tthhee ccamera.
PCANNOT EXECUTE
QCANNOT EXECUTE
aCANNOT EXECUTE
CAN NOT ROTATE
An attempt was made to create a resized copy at a size equal to or larger than the original.
Choose a smaller size.
An attempt was made to rotate a picture that can nnot be rotated.
FCAN NOT ROTATE Movies can not be rotated.
mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.
FCANNOT EXECUTE Red-eye removal can not be applied to movies.
NO CARD
Noo mmeemmoorryy ccard inserted when ECOPY is selected. Insert a memory card.
120
Troubleshooting
Warning Messages and Displays
Description
Warning
bNO IMAGE
aNO IMAGE
The souurce seelecteedd ffor ECOPY contains no images. Select a different source.
• Thhee vvooiiccee mmemo fillee iiss ccoorrupt: The voice memo caan not bbee playedd back.
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.
uERROR
The DPOF print order on the curreent memoryy caarrdd ccoonnttaaiinnss mmoore than 9999 imagess.. Copy the
pictures to internal memory and create a new print order.
The picture caan not be pprintedd uusing DPOF.
DPOF FILE ERROR
CAN NOT SET DPOF
FCAN NOT SET DPOF Movies can not be printed using DPOF.
A connection error occuurrrreedd wwhhiillee ppiiccttuurreess wweerree bbeeiinngg pprriinntteedd or copied tto a coomputeer or other
device. Confirm that the device is turned on and that the USB caable iss conneected.
Printeer out oof papeer oorr iinnkk,, oorr ootthheerr pprriinntteerr eerrrroorr.. CChheecckk pprriinntteerr ((sseeee pprriinntteerr mmaannuuaall ffoorr ddeettaaiillss))..
To resume printing, turn the printer off and then turn it back on.
COMMUNICATTION ERROR
PRINTER ERROR
PRINTER ERROR
RESUME?
Printer out of paper or ink, or ootthheerr pprriinntteerr eerrrroorr.. Check printer (see printer manual for details). If
printing does not resume automatically, press MENU/OK to resume.
An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa
format not ssuuppppoorrtteedd bbyy tthhee pprriinntteerr.. MMoovviieess aanndd ssoommee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess ccan
CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall
to confifirm thaat the ppriinntteerr ssuuppppoorrttss tthhee JJFFIIFF--JJPPEEGG oorr EExxiiff--JJPPEEGG fformaat. If iitt ddooeess nnoott,, tthhee ppiiccttuurreess
can not be pprinted.
Troubleshooting
121
Appendix
Innteerrnnaall MMeemmoorryy//MMeemmoorryy CCaarrdd CCaappaacciittyy
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored, and the number of exposures or length remaining may not dimin-
ish at an even rate. A limited number of test pictures can be taken when no
memory card is inserted.
Medium
Internal memory
(apprrox. 25 MB)
O
4 GB
8 GB
T
FINE
3
5
6
8
NORMAL
FINE
620
830
NORMAL
990
FINE
1250
1670
1990
2620
3880
7110
NORMAL
1990
2640
3880
5080
O
4 : 3
O16 : 9
4 : 3
P16 : 9
4 : 3
6
8
12
15
23
33
1310
1930
2530
3640
5160
P
990
1300
1930
3540
Q
12
22
7320
10370
76min.
98min.
Q16 : 9
i19201
12sec.
16sec.
40sec.
30sec.
62sec.
31sec.
38min.
49min.
115min.
85min.
172min.
86min.
h12801
f2
232min.
172min.
345min.
172min.
k640 × 4803
k320 × 2403
k320 × 1123
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.
2 Individual movies can not exceed 120 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
122
Specificaattions
System
Model
Digital Camera FinePix F660EXR
16 million
Effective pixels
Image sensor
Storage media
File system
/
12-in., EXR CMOS with primary color filter
• Interrnal meemory (approx. 25 MB)
Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order
• SD/SDHC/SDXC memory cards
Format (DPOF)
File format
• Still ppicturres: Exif 2.3 JPEG (compressed)
• Still picctures (3D): MPO
• Movies: MOV (H.264)
• O4 : 3: 4,608 × 3,456
• P4 : 3: 3,264 × 2,448
• Q4 : 3: 2,304 × 1,728
• Audio: WAV
• O3 : 2: 4,6088 × 3,0772
• P3 : 2: 3,2644 × 2,1776
Image size (pixels)
• O16 : 9: 4,608 × 2,592
• P16 : 9: 3,264 × 1,840
• Q16 : 9: 1,920 × 1,080
• Q3 : 2: 2,3044 × 1,5336
• r MOTION PANORAMA v: 1,624 × 11,520 (tall)/11,520 × 1,080 (wide)
• r MOTION PANORAMA w: 1,624 × 5,760 (tall)/5,760 × 1,080 (wide)
• r MOTION PANORAMA x: 1,624 × 3,840 (tall)/3,840 × 1,080 (wide)
• r MOTION PANORAMA z: 1,624 × 11,520 (tall)/11,520 × 1,080 (wide)
Leens
Fujinon 15 × opticall zoom llens,, F3.5 (wide angle) – F5.3 (telephoto)
Focal length
Digital zoom
Aperture
f=4.4 mm–66.0 mmm (35-mm foormat equivalent: 24 mm–360 mm)
Up to about 3.4 × with intelligent digital zoom (up to 51 × when combined with optical zoom)
F3.5/F7.1/F10.0 (wide angle), F5.3/F11.0/F16.0 (telephoto); uses Neutral Density (ND) filter
Appendix
123
Specifications
System
Focus range
(distance from front of lens)
Apppprrooxx.. 4455 ccmm ((11..44 fft.)–infinityy (wide angle); 2.5 m (8.22 fft..)–infinity (telephoto)
• Maaccrro: approx. 5 cm––33..00 mm//11..99 iinn..––99..88 fftt.. (wide angle); 1.2 m––33..00 mm//33..99 fftt..––99..88 fftt.. (telephoto)
Sensitivity
Sttaannddaarrdd oouuttppuutt sseennssiitivity equivalent to ISO 100, 200, 4400, 88000, 1166000, 3322000, 6644000 (image size
Por Q), 12800 (image size Q); AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200)
Metering
256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE
Exposurre control
Programmed AE; aperture-priority AE; shutter-priority AE; manual exposure
/
Exposure compensation –2 EV – +2 EV in increments of 13EV
Picture stabilization Optical stabilization (image-sensoorr sshhiifft)
Shutter speed (combined 8 s–12,000 s
/
mechanicaall and electronic
/
/
• O: ¼ s–11,000 s
• H: 3 s–11,000 s
• Other modes: ¼ s–12,000 s
• p: 4 s–½ s
shutter)
/
/
• S: 2 s–12,000 s
Coonnttinuous
• I: maxx. 2000 fframes; fraame raate caann bbee sseelleecctteedd ffrroomm 1111,, 88,, 55,, aanndd 33 ffppss ((TThhee ffrraammee rraattee vvaarriieess
depending on the shooting conditions or numbers of frames in continuous shooting.)
• P: max. 16 frames; frame rate can bee seleccted froom 11, 88, 5, annd 3 fps
Focus
• Mode: Cennter AFF, multti AF,, ccontinnuous AAF, trraacckking AF
• Autofoocus syystem: Contrast-detect TTL AF
White balance
Self-timer
Custom, auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white
fluorescent, incandesccent, unnderwater
Off, 2 sec., 10 sec.; auto shutter release (nand o)
124
Appendix
Specifications
System
Flash
Auto flash; effecttive raange wwhen seensittivity is seet to AUTOO is apppprrooxx.. 1155 ccmm––33..22 mm//00..44 fftt..––1100..44 fftt..
(wide angle; note that lens may block flash at short ranges), 90 cm––11..99 mm//22..99 fftt..––66..22 fftt.. (telephoto)
Flash mode
Auto, filll flashh, off,, sslow ssyync (reed-eyee remmooval off); aauto with reed-eyyee removvaall,, fifillll flflaasshh wwiitthh rreedd--
eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)
LCD monitor
Movies
3.0-in./7.6 cm, 460k-dot color LCD monitor; frame coverage approx. 100%
• i1920: 1,920 × 1,080 (1080p), 30 fps
• f: 640 × 480 (VGA), 30 fps
• k320×240: 160 fps
• h1280: 1,280 × 720 (720p), 30 fps
• k640×480: 80 fps
• k320×112: 320 fps
Notte: i, h, and fmovies are recorded with stereo sound.
Input/output terminals
A/V OUT (aaudio//videeoo oouuttppuutt)) NTSC or PAL output with monaural sound
Digital input/output
HDMI output
USB 2.0 High-Speeed; sharees A/V OUT cconnector; MTP/PTP
HDMI mini connector
Power supply/other
Power suppplly
• NP-50A rechargeable battery
• AC-5VX AC power adapter and CP-50 DC coupler (sold seeparaatteelly)
Appendix
125
Specifications
Power supply/other
Battery life (approximate
numberr of fraames thhaatt ccan
be takeen withh a fullly-charged
battery)
Battery type
NP-50A (type supplied with cammera)
Approoximate number of frames
300
CIPA staandard, mmeassuurreeddiinnB(auto)modeusingbatterysuppliedwithh ccameraandSDmemorycard.
Notte: NNumberr of shhoots thhaat caann bbee ttaakkeenn wwiitthh bbaatttteerryy vvaarriieess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll
decline at low temperatures.
Dimensions (W × H × D) 103.5 mm × 59.2 mm × 32.6 mm/4.0 in. × 2.3 in. × 1.2 in., excluding projections
(minimum depth 22.9 mm/0.9 in.)
Shooting weight
Caammera wweight
Approx. 217 g/7.6 oz., including battery and memory card
Approx. 196 g/6.9 oz., excluding battery, accessories, and memory card
Operating conditions
• Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity: 10–80% (no condensation)
126
Appendix
Specifications
NP-50A rechargeable battery
Noommiinnaall voltage
Noommiinnaall ccaappaacciitty
DC 3.7V
1000 mAh
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
Weight
Approx. 20 g/0.7 oz.
BC-45W battery charger
Rated input
Input capacitty
100V–240V AC,, 5500//6600 HHz
• 100 V: 8.0VA
• 240 V: 12VA
Rated output
4.2V DC, 550 mA
Supported batteries
Charging time
NP-50A rechargeable batteries
Approx. 150 minutes (+20 °C/+68 °F)
Dimensions (W × H × D) 91 mm × 62 mm × 23 mm/3.5 in. × 2.4 in. × 0.9 in., excluding projections
Weight Approx. 67 g/2.3 oz., excluding battery
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F
Weight and dimensions vary with the country or region of sale.
Appendix
127
Specifications
■ Noottiices
• Specifications subject to change without notice; for the latest information, visit http://
www.fujifilm.com/products/digital_cameras/index.html. FUJIFILM shall not be held li-
able for damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technol-
ogy, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-
tion; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
128
Appendix
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Shooting Mode
E
Adv.
ijni
SP
mMN OHp QRsf U VWF
Option
R
✔
S T U B
r
M
A
S
P
✔
✔ ✔1
C
D h Z
l
✔
Q
N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
BOFF
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
O
K
L
M
✔
✔
✔
1
N
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
BON
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
1
1
1
1
P
✔
✔
✔
✔ ✔1 ✔ ✔1
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
S/R
o
n
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
h
✔
✔
✔
✔
✔
✔
✔
✔
1
1
F
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
F
OFF
d
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AUTO
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AUTO (3200)
AUTO (1600)
AUTO (800)
AUTO (400)
128002
64003
3200
1600
800
400
200
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
100
S
✔
O
✔
✔
✔
✔
✔
✔
✔ ✔4
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
O
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Q
T
✔
✔
Restrictions on Camera Settings
Shooting Mode
D h Z
E
Adv.
ijni
SP
mMN OHp QRsf U VWF
Option
AUTO
R
S T U B
✔ ✔1
r
1
M
A
✔
✔ ✔1
S
P
C
l
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
1
V
W
X
Y
Z
c
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
U
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔5
d
P
e
b
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔5
✔ ✔5
f
5
D
y
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
O
X
Y
P
I
OFF
R
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
1
1
✔ ✔1
✔
✔
✔
✔
✔
Z
1
1
1
1
5
5
1
OFF
ON
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔ ✔1
✔
✔
✔
✔
✔ ✔1
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔ ✔1 ✔ ✔1
✔
✔
✔
✔
✔
b
C
1
1
1
✔
✔
✔
✔
✔
✔
✔
✔
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
o
p
q
r
s
u
x
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔ ✔1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
F
F
1
✔
✔
✔
✔
✔
✔
✔
n
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
r
u
✔
✔
Restrictions on Camera Settings
Shooting Mode
D h Z
E
Adv.
ijni
SP
mMN OHp QRsf U VWF
Option
i1920
h1280
f
R
S T U B
r
M
A
S
P
C
l
✔
✔
✔
✔
✔
✔
W
k
640×480
320×240
320×112
k
k
J
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
L
l
M
m
OFF
ON
OFF
ON
OFF
✔
L
✔ ✔1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
R
B
C
x
1
1
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔ ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔1
✔
✔
✔
✔
1
ON
OFF
n
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔5
✔ ✔5
✔
✔ ✔1
✔ ✔1
✔
✔ ✔1
✔
✔
✔
✔ ✔1
✔
✔
✔
1
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
o
✔
1
2
3
4
5
Automatically optimized for selected shooting mode.
Image sizes over Qare set to Q.
Image sizes over Pare set to P.
Aspect ratio fixed at 4 : 3.
Fixed at settings before recording a movie.
|