FujiFilm 16130716 User Manual

BL01260-201  
EN  
Before You Begin  
First Steps  
DIGITAL CAMERA  
FINEPIX  
T300/T200/T190 Series  
Basic Photography and Playback  
More on Photography  
More on Playback  
Movies  
Owners Manual  
Thank you for your purchase  
of this product. This manual  
describes how to use your  
FUJIFILM digital camera and  
the supplied software. Be sure  
that you have read and un-  
derstood its contents and the  
warnings in “For Your Safety”  
(Pii) before using the camera.  
Connections  
Menus  
Technical Notes  
For information on related products, visit our website at  
http://www.fujifilm.com/products/digital_cameras/index.html  
Troubleshooting  
Appendix  
For Your Safety  
If the video product does not operate  
normally follow the operating instruc-  
tions. Adjust only those controls that are  
covered by the operating instructions as  
an improper adjustment of other controls  
may result in damage and will often re-  
quire extensive work by a qualified tech-  
nician to restore the video product to its  
normal operation.  
Antennas  
Use  
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from  
antenna or cable system is connected to the wall outlet before cleaning. Do not  
the video product, be sure the antenna or use liquid cleaners or aerosol cleaners.  
cable system is grounded so as to provide Use a damp cloth for cleaning.  
some protection against voltage surges  
and built-up static charges. Section 810  
Object and Liquid Entry: Never push ob-  
jects of any kind into this video product  
of the National Electrical Code, ANSI/  
through openings as they may touch  
NFPA No. 70, provides information with  
dangerous voltage points or short out  
respect to proper grounding of the mast  
parts that could result in a fire or electric  
When the video product exhibits a dis-  
tinct change in performance—this indi-  
cates a need for service.  
and supporting structure, grounding of  
shock. Never spill liquid of any kind on  
the lead-in wire to an antenna discharge  
the video product.  
unit, size of grounding conductors, loca-  
Replacement Parts: When replacement  
parts are required, be sure the service  
technician has used replacement parts  
specified by the manufacturer or have  
the same characteristics as the original  
part. Unauthorized substitutions may re-  
sult in fire, electric shock or other hazards.  
Lightning: For added protection for this  
video product receiver during a lightning  
storm, or when it is left unattended and  
unused for long periods of time, unplug  
it from the wall outlet and disconnect the  
antenna or cable system. This will pre-  
vent damage to the video product due to  
lightning and power-line surges.  
tion of antenna discharge unit, connec-  
tion to grounding electrodes, and re-  
quirements for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS  
PER NATIONAL ELECTRICAL CODE  
Ground Clamp  
Antenna Lead  
in Wire  
Safety Check: Upon completion of any ser-  
vice or repairs to this video product, ask  
the service technician to perform safety  
checks to determine that the video prod-  
uct is in proper operating condition.  
Service  
Antenna  
Electric Service  
Equipment  
Servicing: Do not attempt to service this  
video product yourself as opening or  
removing covers may expose you to dan-  
gerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
Discharge Unit  
(NEC SECTION  
810-20)  
Ground Clamps  
Grounding  
Conductors  
(NEC SECTION  
810-21)  
Damage Requiring Service: Unplug this vid-  
eo product from the wall outlet and refer  
servicing to qualified service personnel  
under the following conditions:  
• When the power-supply cord or plug is  
damaged.  
• If liquid has been spilled, or objects  
have fallen into the video product.  
• If the video product has been exposed  
to rain or water.  
Power Service Grounding  
Electrode System (NEC  
ART 250. PART H)  
Power Lines: An outside antenna system  
should not be located in the vicinity of  
overhead power lines or other electric  
light or power circuits, or where it can fall  
into such power lines or circuits. When  
installing an outside antenna system, ex-  
treme care should be taken to keep from  
touching such power lines or circuits as  
contact with them might be fatal.  
• If the video product has been dropped  
or the cabinet has been damaged.  
iii  
For Your Safety  
Be sure to read these notes before use  
WARNING  
Do not allow water or foreign objects to enter the camera. If water  
or foreign objects get inside the camera, turn the cam-  
era off, remove the battery, and disconnect and unplug  
the AC power adapter. Continued use of the camera  
can cause a fire or electric shock. Contact your FUJIFILM  
dealer.  
Safety Notes  
• Make sure that you use your camera correctly. Read these  
safety notes and your Owner’s Manual carefully before use.  
• After reading these safety notes, store them in a safe place.  
Avoid exposure  
to water  
About the Icons  
The icons shown below are used in this document to indicate  
the severity of the injury or damage that can result if the infor-  
mation indicated by the icon is ignored and the product is used  
incorrectly as a result.  
Do not use the camera in the bathroom or shower. This can cause  
a fire or electric shock.  
Do not use in  
the bathroom or  
shower  
Never attempt to change or take apart the camera (never open the  
case). Failure to observe this precaution can cause fire or  
electric shock.  
This icon indicates that death or serious injury can result  
if the information is ignored.  
Do not  
disassemble  
WARNING  
Should the case break open as the result of a fall or other accident,  
do not touch the exposed parts. Failure to observe this precau-  
tion could result in electric shock or in injury from touch-  
ing the damaged parts. Remove the battery immediate-  
ly, taking care to avoid injury or electric shock, and take  
the product to the point of purchase for consultation.  
This icon indicates that personal injury or material dam-  
age can result if the information is ignored.  
CAUTION  
Do not touch  
internal parts  
The icons shown below are used to indicate the nature of the  
instructions which are to be observed.  
Do not change, heat or unduly twist or pull the connection cord and  
do not place heavy objects on the connection cord. These actions  
could damage the cord and cause a fire or electric shock.  
If the cord is damaged, contact your FUJIFILM dealer.  
Triangular icons tell you that this information requires at-  
tention (“Important”).  
Circular icons with a diagonal bar tell you that the action  
indicated is prohibited (“Prohibited”).  
Do not place the camera on an unstable surface. This can cause  
Filled circles with an exclamation mark indicate an action  
that must be performed (“Required”).  
the camera to fall or tip over and cause injury.  
Never attempt to take pictures while in motion. Do not use the  
camera while you are walking or driving a vehicle. This  
can result in you falling down or being involved in a traf-  
fic accident.  
WARNING  
If a problem arises, turn the camera off, remove the battery, and  
disconnect and unplug the AC power adapter. Continued use  
of the camera when it is emitting smoke, is emitting any  
Do not touch any metal parts of the camera during a thunderstorm.  
This can cause an electric shock due to induced current  
from the lightning discharge.  
Unplug from  
power socket  
unusual odor, or is in any other abnormal state can cause  
a fire or electric shock. Contact your FUJIFILM dealer.  
Do not use the battery except as specified. Load the battery as  
shown by the indicator.  
Do not heat, change or take apart the battery. Do not drop or subject  
the battery to impacts. Do not store the battery with metallic prod-  
ucts. Any of these actions can cause the battery to burst  
or leak and cause fire or injury as a result.  
iv  
For Your Safety  
WARNING  
CAUTION  
Use only the battery or AC power adapters specified for use with this  
camera. Do not use voltages other than the power supply voltage  
shown. The use of other power sources can cause a fire.  
If the battery leaks and fluid gets in contact with your eyes, skin or  
clothing, flush the affected area with clean water and seek medical  
attention or call an emergency number right away.  
Do not use the charger to charge batteries other than those speci-  
fied here. The supplied battery charger is for use only with  
the type of battery supplied with the camera. Using the  
charger to charge conventional batteries or other types  
of rechargeable batteries can cause the battery to leak  
fluid, overheat or burst.  
Do not use this camera in locations affected by oil fumes, steam, hu-  
midity or dust. This can cause a fire or electric shock.  
Do not leave this camera in places subject to extremely high tem-  
peratures. Do not leave the camera in locations such as a  
sealed vehicle or in direct sunlight. This can cause a fire.  
Keep out of the reach of small children. This product could  
cause injury in the hands of a child.  
Do not place heavy objects on the camera. This can cause the  
heavy object to tip over or fall and cause injury.  
Do not move the camera while the AC power adapter is still connect-  
ed. Do not pull on the connection cord to disconnect the AC power  
adapter. This can damage the power cord or cables and  
cause a fire or electric shock.  
When carrying the battery, install it in a digital camera or keep it  
in the hard case. When storing the battery, keep it in the hard case.  
When discarding, cover the battery terminals with insulation tape.  
Contact with other metallic objects or batteries could  
cause the battery to ignite or burst.  
Do not use the AC power adapter when the plug is damaged or  
the plug socket connection is loose. This could cause a fire or  
electric shock.  
Keep memory cards out of the reach of small children. Because  
memory cards are small, they can be swallowed by chil-  
dren. Be sure to store memory cards out of the reach of  
small children. If a child swallows a memory card, seek  
medical attention or call an emergency number.  
Do not cover or wrap the camera or the AC power adapter in a cloth  
or blanket. This can cause heat to build up and distort the  
casing or cause a fire.  
When you are cleaning the camera or you do not plan to use the cam-  
era for an extended period, remove the battery and disconnect and  
unplug the AC power adapter. Failure to do so can cause a fire  
or electric shock.  
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can  
cause a fire.  
Unplug from  
power socket  
Using a flash too close to a person’s eyes may temporarily affect the  
eyesight. Take particular care when photographing infants  
and young children.  
When a memory card is removed, the card could come out of the slot  
too quickly. Use your finger to hold it and gently release the card.  
Injury could result to those struck by the ejected card.  
Request regular internal testing and cleaning for your camera.  
Build-up of dust in your camera can cause a fire or electric  
shock. Contact your FUJIFILM dealer to request internal  
cleaning every two years. Please note that this service is  
not free of charge.  
v
For Your Safety  
Charging the Battery  
Cautions: Handling the Battery  
The Battery and Power Supply  
Charge the battery in the supplied bat- • Do not transport or store with metal  
tery charger. Charging times will increase  
Note: Check the type of battery used in  
your camera and read the appropriate  
sections.  
objects such as necklaces or hairpins.  
at ambient temperatures below +10°C • Do not expose to flame or heat.  
(+50°F) or above +35°C (+95°F). Do not • Do not disassemble or modify.  
attempt to charge the battery at tem- • Use with designated chargers only.  
peratures above 40°C (+104°F); at tem- • Do not drop or subject to strong physi-  
peratures below 0°C (+32°F), the battery  
will not charge.  
The following describes the proper use  
of batteries and how to prolong their  
life. Incorrect use can shorten battery  
life or cause leakage, overheating, fire, or  
explosion.  
cal shocks.  
• Do not expose to water.  
• Keep the terminals clean.  
• The battery and camera body may be-  
come warm to the touch after extended  
use. This is normal.  
Do not attempt to recharge a fully charged  
battery. The battery does not however  
need to be fully discharged before charg-  
ing.  
Li-ion Batteries  
Read this section if your camera uses a  
rechargeable Li-ion battery.  
AA Alkalline/Rechargeable Ni-MH Batteries  
Read this section if your camera uses AA  
alkaline or rechargeable AA Ni-MH bat-  
teries. Information on compatible bat-  
tery types may be found elsewhere in the  
camera manual.  
The battery is not charged at shipment.  
Charge the battery before use. Keep the  
battery in its case when not in use.  
The battery may be warm to the touch  
immediately after charging or use. This  
is normal.  
Notes on the Battery  
Battery Life  
The battery gradually loses its charge  
when not in use. Charge the battery one  
or two days before use.  
At normal temperatures, the battery can  
be recharged about 300 times. A notice-  
able decrease in the length of time the  
battery will hold a charge indicates that it  
has reached the end of its service life and  
should be replaced.  
Cautions: Handling the Batteries  
• Do not expose to water, flame, or heat,  
or store in warm or humid conditions.  
• Do not transport or store with metal  
objects such as necklaces or hairpins.  
• Do not disassemble or modify the bat-  
teries or battery casing.  
• Do not subject to strong physical  
shocks.  
• Do not use batteries that are leaking,  
deformed, or discolored.  
Battery life can be extended by turning  
the camera off when not in use.  
Battery capacity decreases at low tem-  
Storage  
depleted battery may not  
peratures;  
a
Performance may be impaired if the bat-  
tery is left unused for extended periods  
when fully charged. Run the battery flat  
before storing it.  
function at when cold. Keep  
a
fully  
charged spare battery in a warm place  
and exchange as necessary, or keep the  
battery in your pocket or other warm  
place and insert it in the camera only  
when shooting. Do not place the battery  
in direct contact with hand warmers or  
other heating devices.  
If the camera will not be used for an ex-  
tended period, remove the battery and  
store it in a dry place with an ambient  
temperature of from +15°C to +25°C  
(+59°F to +77°F). Do not store in loca-  
tions exposed to extremes of tempera-  
ture.  
• Keep out of reach of infants and small  
children.  
• Insert in the correct orientation.  
vi  
For Your Safety  
• Do not mix old and new batteries, bat- Ni-MH Batteries  
teries with different charge levels, or The capacity of Ni-MH batteries may be Dispose of used batteries in accord with  
batteries of different types. temporarily reduced when new, after local regulations.  
Disposal  
• If the camera will not be used for an long periods of disuse, or if they are re-  
extended period, remove the batteries. peatedly recharged before being fully  
Note that the camera clock will be reset. discharged. This is normal and does not  
• The batteries may be warm to the touch indicate a malfunction. Capacity can be  
immediately after use. Turn the camera increased by repeatedly discharging the  
off and allow the batteries to cool be- batteries using the discharge option in  
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)  
This section applies to all camera models.  
Use only FUJIFILM AC power adapters  
designated for use with this camera. Oth-  
er adapters could damage the camera.  
• The AC power adapter is for indoor use  
the camera setup menu and recharg-  
only.  
fore handling.  
• Battery capacity tends to decrease at ing them using a battery charger (sold  
low temperatures. Keep spare batter- separately).  
ies in a pocket or other warm place and  
• Be sure the DC plug is securely con-  
nected to the camera.  
• Turn the camera off before disconnect-  
ing the adapter. Disconnect the adapter  
by the plug, not the cable.  
• Do not use with other devices.  
• Do not disassemble.  
• Do not expose to high heat and hu-  
midity.  
• Do not subject to strong physical  
shocks.  
• The adapter may hum or become hot  
to the touch during use. This is normal.  
• If the adapter causes radio interfer-  
ence, reorient or relocate the receiving  
antenna.  
Q
CAUTION: Do not use the discharge op-  
tion with alkaline batteries.  
exchange as necessary. Cold batteries  
may recover some of their charge when  
warmed.  
• Fingerprints and other stains on the  
battery terminals can impair battery  
performance. Thoroughly clean the  
terminals with a soft, dry cloth before  
inserting them in the camera.  
The camera draws  
a
small amount of  
current even when off. Ni-MH batteries  
that have been left in the camera for an  
extended period may be drawn down  
to the point that they no longer hold a  
charge. Battery performance may also  
drop if the batteries are run down in  
If the batteries leak, clean the bat-  
tery compartment thoroughly be-  
fore inserting new batteries.  
a
device such as  
a
flashlight. Use the  
discharge option in the camera setup  
menu to discharge Ni-MH batteries. Bat-  
teries that no longer hold a charge even  
after repeatedly being discharged and  
recharged have reached the end of their  
service life and must be replaced.  
If fluid from the battery comes  
into contact with skin or clothing,  
flush the affected area with water.  
If fluid enters your eyes, immediately  
flush the affected area with water and  
seek medical attention. Do not rub your  
eyes. Failure to observe this precaution  
could result in permanent visual impair-  
ment.  
Ni-MH batteries can be recharged in a  
battery charger (sold separately). Bat-  
teries may become warm to the touch  
after charging. Refer to the instructions  
provided with the charger for more infor-  
mation. Use the charger with compatible  
batteries only.  
Ni-MH batteries gradually lose their  
charge when not in use.  
vii  
For Your Safety  
is a trademark. YouTube is a trademark of  
Google Inc. All other trade names men-  
tioned in this manual are the trademarks  
or registered trademarks of their respec-  
tive owners.  
Liquid CCrystal  
Using the Camera  
In the event that the LCD monitor is dam-  
aged, care should be taken to avoid con-  
tact with liquid crystal. Take the urgent  
action indicated should any of the follow-  
ing situations arise:  
Do not aim the camera at extremely  
bright light sources, such as the sun in  
a cloudless sky. Failure to observe this  
precaution could damage the camera  
image sensor.  
Electtricall Inteerrference  
If liquid crystal comes in contact with your  
skin, clean the area with  
then wash thoroughly with soap and  
running water.  
If liquid crystal enters your eyes, flush the af-  
fected eye with clean water for at least  
15 minutes and then seek medical as-  
sistance.  
If liquid crystal is swallowed, rinse your  
mouth thoroughly with water. Drink  
large quantities of water and induce  
vomiting, then seek medical assistance.  
This camera may interfere with hospital  
or aviation equipment. Consult with hos-  
pital or airline staff before using the cam-  
era in a hospital or on an aircraft.  
Take Test Shots  
a
cloth and  
Before taking photographs on important  
occasions (such as at weddings or before  
taking the camera on a trip), take a test  
shot and view the result in the LCD moni-  
tor to ensure that the camera is function-  
ing normally. FUJIFILM Corporation can  
not accept liability for damages or lost  
Color Television Systems  
NTSC (National Television System Com-  
mittee) is a color television telecasting  
specification adopted mainly in the  
U.S.A., Canada, and Japan. PAL (Phases  
Alternation by Line) is a color television  
system adopted mainly in European  
countries and China.  
profits incurred as  
malfunction.  
a
result of product  
Notes on Copyright  
Unless intended solely for personal  
use, images recorded using your digital  
camera system cannot be used in ways  
that infringe copyright laws without the  
consent of the owner. Note that some  
restrictions apply to the photographing  
of stage performances, entertainments,  
and exhibits, even when intended purely  
for personal use. Users are also asked to  
note that the transfer of memory cards  
containing images or data protected  
under copyright laws is only permissible  
within the restrictions imposed by those  
copyright laws.  
Although the display is manufactured us-  
ing extremely high-precision technology,  
it may contain pixels that are always lit or  
that do not light. This is not a malfunc-  
tion, and images recorded with the prod-  
uct are unaffected.  
Exif Print (Exif Version 2.3)  
Exif Print is a newly revised digital camera  
file format in which information stored  
with photographs is used for optimal  
color reproduction during printing.  
Trademarkk Information  
IMPORTANT NOTICE:  
Read Before Using the Software  
Direct or indirect export, in whole or in  
part, of licensed software without the  
permission of the applicable governing  
bodies is prohibited.  
xD-Picture Card and E are trademarks  
of FUJIFILM Corporation. The typefaces  
included herein are solely developed by  
DynaComware Taiwan Inc. Macintosh,  
QuickTime, and Mac OS are trademarks of  
Apple Inc. in the U.S.A. and other coun-  
tries. Windows 7, Windows Vista, and the  
Windows logo are trademarks of the Mi-  
crosoft group of companies. Adobe and  
Adobe Reader are either trademarks or  
registered trademarks of Adobe Systems  
Incorporated in the U.S.A. and/or other  
countries. The SDHC and SDXC logos are  
trademarks of SD-3C, LLC. The HDMI logo  
Haandling  
To ensure that images are recorded cor-  
rectly, do not subject the camera to im-  
pact or physical shocks while images are  
being recorded.  
viii  
About This Manual  
Before using the camera, read this manual and the warnings inFor Your Safe-  
ty(Pii). For information on specific topics, consult the sources below.  
Table of Contents .............................Pxi Troubleshooting ............................ P83  
The “Table of Contents” gives an Having a specific problem with the  
overview of the entire manual. The camera? Find the answer here.  
principal camera operations are  
listed here.  
Warning MMessaggeess aanndd Displays ..... P88  
Find out what’s behind that flashing  
icon or error message in the display.  
Memoryy Caarrds  
Pictures can be stored on optional SD and SDHC memory cards (P10). In this man-  
ual, SD/SDHC memory cards are referred to asmemory cards.”  
ix  
Frequeently--Usseedd BBuuttttons  
Turning the Caamera onn iin Playbaack Mode  
y When the camera is  
off, playback can be  
Takiinngg PPictureess DDuurriinngg Playback  
y To return instantly to shooting mode,  
press the shutter button halfway.  
started by pressing the  
abutton for about a  
second.  
Shoot  
View  
Silent Mode  
Deletingg Pictures  
y Press the selector up (b)  
to display deletion op-  
tions.  
y Press and hold the DISP/  
BACK button to disable  
camera lights and  
sounds.  
x
Table of Contents  
For Your Safety ..................................................................ii  
IMPORTANT SAFETY INSTRUCTIONS ..................................ii  
Safety Notes ..................................................................iv  
About This Manual ...........................................................ix  
Frequently-Used Buttons .................................................x  
Moree oonn PPhotography  
Shooting Mode................................................................20  
SP SCENE POSITION.......................................................21  
r PANORAMA..........................................................22  
Focus Lock........................................................................25  
dExposure Compensation..........................................27  
FMacro Mode (Close-ups) ...........................................28  
NUsing the Flash (Intelligent Flash) ............................29  
hUsing the Self-Timer .................................................31  
bIntelligent Face Detection.......................................32  
nFace Recognition......................................................33  
Adding New Faces..........................................................33  
Viewing, Editing, and Deleting Existing Data .................35  
Adding Faces Automatically ...........................................35  
Beforre You Begin  
Symbols and Conventions.................................................1  
Supplied Accessories.........................................................1  
Parts of the Camera ..........................................................2  
Camera Displays...............................................................4  
Shooting ........................................................................4  
Playback.........................................................................5  
First Steps  
Charging the Battery ........................................................6  
Inserting the Battery and a Memory Card.......................8  
Compatible Memory Cards .............................................10  
Turning the Camera on and Off......................................13  
Shooting Mode ..............................................................13  
Playback Mode...............................................................13  
Basic Setup ......................................................................15  
Moree oon Playback  
Playback Options.............................................................37  
IFavorites: Rating Pictures .........................................37  
Playback Zoom...............................................................38  
Multi-Frame Playback....................................................39  
A
Deleting Pictures......................................................40  
b
Image Search............................................................41  
k
PhotoBook Assist .....................................................42  
Basic Photography and Playback  
Taking Pictures in Q (Scene Recognition) Mode......16  
Viewing Pictures .............................................................19  
Creating a PhotoBook.....................................................42  
Viewing Photobooks ......................................................43  
Editing and Deleting Photobooks...................................43  
Viewing Panoramas ........................................................44  
xi  
Table of Contents  
Movies  
Menus  
Recording Movies............................................................45  
Using the Menus: Shooting Mode..................................60  
Using the Shooting Menu...............................................60  
Shooting Menu Options .................................................60  
ASCENE POSITION .....................................................60  
NISO........................................................................60  
OIMAGE SIZE............................................................61  
TIMAGE QUALITY .....................................................62  
PFINEPIX COLOR .......................................................62  
DWHITE BALANCE ....................................................63  
RCONTINUOUS .........................................................63  
bFACE DETECTION ....................................................64  
FAF MODE...............................................................64  
nFACE RECOGNITION .................................................64  
PMODE....................................................................64  
OQUALITY................................................................64  
Viewing Movies ...............................................................47  
Coonnnneections  
Viewing Pictures on TV ...................................................48  
Printing Pictures via USB................................................49  
Printing the DPOF Print Order.........................................51  
Viewing Pictures on a Computer....................................53  
Windows: Installing MyFinePix Studio ...........................53  
Macintosh: Installing FinePixViewer...............................55  
Connecting the Camera..................................................57  
xii  
Table of Contents  
Using the Menus: Playback Mode ..................................65  
Using the Playback Menu...............................................65  
Playback Menu Options..................................................65  
kPHOTOBOOK ASSIST................................................65  
bIMAGE SEARCH ......................................................65  
AERASE ...................................................................65  
jMARK FOR UPLOAD TO............................................66  
ISLIDE SHOW ..........................................................67  
BRED EYE REMOVAL .................................................67  
DPROTECT................................................................68  
GCROP.....................................................................68  
ORESIZE...................................................................69  
CIMAGE ROTATE .......................................................69  
nERASE FACE RECOG. ................................................70  
KPRINT ORDER (DPOF) ..............................................70  
The Setup Menu ..............................................................71  
Using the Setup Menu....................................................71  
Setup Menu Options ......................................................72  
FDATE/TIME ............................................................72  
NTIME DIFFERENCE ...................................................72  
La......................................................72  
oSILENT MODE.........................................................72  
RRESET....................................................................73  
KFORMAT ................................................................73  
AIMAGE DISP. ...........................................................73  
BFRAME NO. ............................................................74  
GOPERATION VOL......................................................74  
HSHUTTER VOLUME ..................................................74  
eSHUTTER SOUND....................................................75  
IPLAYBACK VOLUME ................................................75  
JLCD BRIGHTNESS ....................................................75  
ELCD MODE .............................................................75  
MAUTO POWER OFF...................................................75  
LDUAL IS MODE .......................................................75  
BRED EYE REMOVAL .................................................76  
mBLINK DETECTION...................................................76  
DDIGITAL ZOOM .......................................................77  
pMOVIE ZOOM TYPE .................................................77  
nSAVE ORG IMAGE....................................................78  
OBACKGROUND COLOR..............................................78  
cGUIDANCE DISPLAY ................................................78  
QVIDEO SYSTEM .......................................................78  
xiii  
Table of Contents  
Techniccaall NNotes  
Troubleshooting  
Optional Accessories .......................................................79  
Printing........................................................................79  
Computer Related..........................................................79  
Audio/Visual.................................................................79  
Accessories from FUJIFILM..............................................80  
Caring for the Camera.....................................................81  
Storage and Use .............................................................81  
Water and Sand.............................................................81  
Condensation................................................................81  
Cleaning.........................................................................82  
Traveling ........................................................................82  
Problems and Solutions..................................................83  
Warning Messages and Displays ....................................88  
Appendix  
Tips and Tricks..................................................................92  
Memory Card Capacity....................................................95  
Specifications ..................................................................96  
xiv  
Before You Begin  
Symbols andd Convventions  
The following symbols are used in this manual:  
Q : This information should be read before use to ensure correct operation.  
R : Additional information that may be helpful when using the camera.  
P: Other pages in this manual on which related information may be found.  
Menus and other text in the LCD monitor are shown in bold. In the illustra-  
tions in this manual, displays may be simplified for explanatory purposes.  
Supplied Accessories  
The following items are included with the camera:  
Plug adapter*  
NP-45A recharge-  
able battery  
BC-45C battery  
charger  
USB cable  
CD-ROM  
(contains this  
manual)  
• Strap  
User Guide  
Attttaacchhiing the Strap  
Attach the strap as  
shown.  
* Shape of adapter varies with region of sale.  
1
Parts of the Camera  
For more information, refer to the page listed to the right of each item.  
1
9
2
10  
3
11  
4
8
12  
13  
14  
17  
18  
16  
15  
5
6
7
20  
19  
Selector button  
Move cursor up  
d(exposure compensation) button (P27)  
b(delete) button (Px)  
MENU/OK button  
Move cursor left  
F(macro) button (P28)  
Move cursor right  
N(flash) button (P29)  
Move cursor down  
h(self-timer) button (P31)  
2
Before You Begin  
Parts of the Camera  
1 Shutter button.............................................................. 18 11 Mode dial...................................................................... 20  
2 ON/OFF button ............................................................. 13 12 a(playback) button .................................................. 19  
3 Self-timer lamp ............................................................ 31 13 Indicator lamp (see below)  
4 Flash............................................................................. 29 14 Strap eyelet .................................................................... 1  
5 Microphone .................................................................. 45 15 Battery-chamber cover................................................... 8  
6 Speaker......................................................................... 47 16 USB multi-connector .........................................48, 49, 57  
7 Lens and lens cover  
17 Tripod mount  
8 Zoom control ...........................................................17, 38 18 Memory card slot............................................................ 9  
9 LCD monitor.................................................................... 4 19 Battery chamber............................................................. 8  
10 DISP (display)/BACK button .....................................5, 15 20 Battery latch..............................................................8, 10  
o (silent mode) button* ................................................x  
*Press and hold the DISP/BACK button until o is displayed.  
Thhee IInndicator Lamp  
The indicator lamp shows camera status as follows:  
Indicator lamp  
Glowwss ggrreen  
Blinks green  
Caammera sstatus  
Focus locked.  
Blur, focus, or exposure warning. Picture can be taken.  
Blinks green and orange Recording pictures. Additional pictures can be taken.  
Glowwss oorraannggee  
Blinks orange  
Blinks red  
Recording pictures. No additional pictures can be taken at this time.  
Flash charging; flash will not fire when picture is taken.  
Lens or memory error.  
Before You Begin  
3
Parts of the Camera  
Camera Displays  
The following types of indicator may be displayed during shooting and play-  
back. Indicators vary with camera settings.  
Shooting  
6 Focus warning .........................................................18, 88  
7 Number of available frames.......................................... 95  
8 Sensitivity..................................................................... 60  
9 Image size/Image quality ........................................61, 62  
10 FINEPIX color ................................................................ 62  
11 White balance............................................................... 63  
12 Battery level ................................................................... 5  
13 Dual IS mode ................................................................ 75  
14 Exposure compensation................................................ 27  
15 Shutter speed /Aperture  
16 Date and time............................................................... 15  
17 Blur warning............................................................30, 88  
18 Self-timer indicator ...................................................... 31  
19 Macro (close-up) mode................................................. 28  
20 Flash mode ................................................................... 29  
1 Shooting mode............................................................. 20  
2 Intelligent Face Detection indicator .............................. 32  
3 Continuous shooting mode........................................... 63  
4 Silent mode indicator ................................................3, 72  
5 Focus frame .................................................................. 25  
4
Before You Begin  
Parts of the Camera  
Playback  
1 Playback mode indicator..........................................19, 37  
2 Intelligent Face Detection indicator .........................32, 64  
3 Red-eye removal indicator............................................ 67  
4 Silent mode indicator ................................................3, 72  
5 Gift image..................................................................... 37  
6 Frame number.............................................................. 74  
7 Mark for upload to........................................................ 66  
8 Photobook assist........................................................... 42  
9 Favorites ....................................................................... 37  
10 DPOF print indicator ..................................................... 51  
11 Protected image ........................................................... 68  
Batterryy LLevel  
Battery level is shown as follows:  
Indicator  
Description  
D(white)  
C(white)  
B(red)  
Battery partially discharged.  
Battery more than half discharged.  
Low battery. Charge as soon as possible.  
A(blinks red) Battery exhausted. Turn camera off and charge battery.  
Hiding and Viewing Indicators  
Press DISP/BACK to cycle through shooting and playback indicators as follows:  
Shooting: Indicators displayed/indicators hidden/best framing  
Playback: Indicators displayed/indicators hidden/Ifavorites  
Before You Begin  
5
First Steps  
Chhaarrggiinngg the Batteerryy  
The battery is not charged at shipment. Charge the battery before use.  
Attach the plug adapter.  
1
Attach the plug adapter as shown at right,  
making sure that it is fully inserted and clicks  
into place on the charger terminals.  
Q The plug adapter is exclusively for use with the  
supplied battery charger. Do not use it with  
other devices.  
Battery charger  
Plug adapter  
Place the battery in the supplied battery charger.  
2
Battery  
Insert the battery in the orien-  
Arrow  
tation indicated by the CFD  
Charge lamp  
labels.  
The camera uses an NP-45A re-  
chargeable battery.  
CFD label  
CFD label  
6
Charging the Battery  
Plug the charger in.  
Plug the charger into an indoor power outlet. The charging indicator will  
light.  
3
4
Thhee CCharggiinngg IInnddicator  
The charging indicator shows battery charge status as follows:  
Charging indicator  
Off  
On (green)  
On (orange)  
Blinkss (orange)  
Battery status  
Battery not inserted.  
Battery fully charged.  
Battery charging.  
Battery fault.  
Action  
Insert the battery.  
Reemmoove the battery.  
Unplug thhe chargeer and remmove the battery.  
Charge the battery.  
Remove the battery when charging is complete.  
Q Unplug the charger when it is not in use.  
First Steps  
7
Innsseertinng the Baatttterryy aanndd aa MMemory Cardd  
After charging the battery, insert the battery and memory card as described  
below.  
Open the battery-chamber cover.  
R Be sure the camera is off before opening the  
battery-chamber cover.  
1
Q Do not open the battery-chamber cover  
when the camera is on. Failure to observe  
this precaution could result in damage to  
image files or memory cards.  
Q Do not use excessive force when handling the battery-chamber cover.  
Insert the battery.  
Align the orange stripe on the battery with  
2
Orange stripe  
the orange battery latch and slide the bat-  
tery into the camera, keeping the battery  
latch pressed to one side. Confirm that the  
battery is securely latched.  
Battery latch  
Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert  
the battery upside down or backwards. The battery will slide in easily in the cor-  
rect orientation.  
8
First Steps  
Inserting the Battery and a Memory Card  
Insert the memory card.  
3
Holding the memory card in the  
orientation shown at right, slide it in  
until it clicks into place at the back  
of the slot.  
Q Be sure card is in the correct orienta-  
tion; do not insert at an angle or use  
force.  
Battery  
Click  
Q SD/SDHC memory cards can be locked, making it  
impossible to format the card or to record or delete  
images. Before inserting an SD/SDHC memory card,  
slide the write-protect switch to the unlocked posi-  
tion.  
Write-protect switch  
Close the battery-chamber cover.  
4
First Steps  
9
Inserting the Battery and a Memory Card  
Reemoving the Battery annd Memorry Caarrdd  
Before removing the battery or memory card, turn the camera off and open the  
battery-chamber cover.  
Battery latch  
To remove the battery, press the battery latch to the side, and  
slide the battery out of the camera as shown.  
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand. When a memory card  
is removed, the card could come out of the slot too quickly. Use  
your finger to hold it and gently release the card.  
Compatible Memory Cards  
FUJIFILM and SanDisk SD and SDHC memory cards have been approved for  
use in the camera. A complete list of approved memory cards is available at  
http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is  
not guaranteed with other cards. The camera can not be used with xD-Picture  
Cards or MultiMediaCard (MMC) devices.  
10  
First Steps  
Inserting the Battery and a Memory Card  
Q Memory Caarrds  
Do not turn the camera off or remove the memory card while the memory card is  
being formatted or data are being recorded to or deleted from the card. Failure to  
observe this precaution could damage the card.  
• Format SD/SDHC memory cards before first use, and be sure to reformat all memory  
cards after using them in a computer or other device. For more information on for-  
matting memory cards, seeKFORMAT” (P73).  
• Memory cards are small and can be swallowed; keep out of reach of children. If a  
child swallows a memory card, seek medical assistance immediately.  
• miniSD or microSD adapters that are larger or smaller than the standard dimensions  
of an SD/SDHC memory card may not eject normally; if the card does not eject, take  
the camera to an authorized service representative. Do not forcibly remove the card.  
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.  
• Movie recording may be interrupted with some types of SD/SDHC memory card. Use  
a G card or better when shooting HD movies.  
• Formatting a memory card in the camera creates a folder in which pictures are  
stored. Do not rename or delete this folder or use a computer or other device to  
edit, delete, or rename image files. Always use the camera to delete pictures; before  
editing or renaming files, copy them to a computer and edit or rename the copies,  
not the originals.  
First Steps  
11  
Inserting the Battery and a Memory Card  
Q Batteries  
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this  
precaution could prevent the battery from charging.  
• Do not affix stickers or other objects to the battery. Failure to observe this precaution  
could make it impossible to remove the battery from the camera.  
• Do not short the battery terminals. The battery could overheat.  
• Read the cautions inThe Battery and Power Supply(Pvi).  
• Use only battery chargers designated for use with the battery. Failure to observe this  
precaution could result in product malfunction.  
• Do not remove the labels from the battery or attempt to split or peel the outer casing.  
• The battery gradually loses its charge when not in use. Charge the battery one or  
two days before use.  
12  
First Steps  
Turning the Camera on and Off  
Shooting Mode  
Playback Mode  
Press the ON/OFF button to turn the To turn the camera on and begin  
camera on. The lens will extend and playback, press the a button for  
the lens cover will open.  
about a second.  
Press the a button again or press  
the ON/OFF button to turn the camera  
off.  
Press ON/OFF again to turn the camera  
off.  
R Switching to Playback Mode  
R Switching to Shooting Mode  
Press the a button to start playback.  
Press the shutter button halfway to return  
to shooting mode.  
To exit to shooting mode, press the shut-  
ter button halfway. Press the a button  
to return to playback.  
First Steps  
13  
Turning the Camera on and Off  
Q Forcibly obstructing the lens could cause damage or product malfunction.  
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.  
Q The ON/OFF button does not completely end the supply of power to the camera.  
R Auto Power Off  
The camera will turn off automatically if no operations are performed for the length of  
time selected for MAUTO POWER OFF (P75).  
14  
First Steps  
Baassic SSetup  
A language-selection dialog is displayed the first time the camera is turned  
on. Set up the camera as described below (you can reset the clock or change  
languages at any time using the FDATE/TIME or La options in  
the setup menu; for information on displaying the setup menu, see page 71).  
Highlight a language and press MENU/OK.  
1
R Press DISP/BACK to skip the current step. Any steps you skip  
will be displayed the next time the camera is turned on.  
The date and time will be displayed. Press the selector  
left or right to highlight the year, month, day, hour, or  
minute and press up or down to change. To change the  
order in which the year, month, and day are displayed,  
highlight the date format and press the selector up or  
down. Press MENU/OK when settings are complete.  
2
R Thhee CCamera Clock  
If the battery is removed for an extended period, the camera clock will be reset and the  
language-selection dialog will be displayed when the camera is turned on.  
First Steps  
15  
Basic Photography and Playback  
Taking Pictures in Q (Scene Recoognitionn)) MMode  
This section describes how to take pictures in Q (scene recognition) mode.  
The camera automatically analyzes the composition and adjusts settings ap-  
propriately.  
Select Q mode.  
1
Turn the camera on and rotate the mode  
dial to Q. The Q display will appear in  
the LCD monitor.  
The gIccoon  
This icon indicates that the camera continuously searches for faces to select the  
appropriate scene, increasing the drain on the battery.  
Thhe Scene Iccoon  
The camera selects the scene according to shooting conditions and the type of  
subject: bPORTRAIT (portraits), cLANDSCAPE (landscapes), dNIGHT (poorly-lit land-  
scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT  
(backlit portraits), aAUTO (all other scenes)  
16  
Taking Pictures in Q (Scene Recognition) Mode  
Frame the picture.  
Use the zoom control to frame the picture in the display.  
2
Zoom indicator  
Zoom out  
Zoom in  
Hoollddiinngg tthhee CCamera  
Hold the camera steady with both hands and brace your  
elbows against your sides. Shaking or unsteady hands can  
blur your shots.  
To prevent pictures that are out of focus or too dark (under-  
exposed), keep your fingers and other objects away from  
the lens and flash.  
Basic Photography and Playback  
17  
Taking Pictures in Q (Scene Recognition) Mode  
Focus.  
3
Press the shutter button halfway to focus.  
Double  
beep  
R The lens may make a noise when the camera focuses; this  
is normal.  
If the camera is able to focus, it will beep twice and the indicator lamp will  
glow green.  
If the camera is unable to focus, the focus frame will turn red, swill be dis-  
played, and the indicator lamp will blink green. Change the composition  
or use focus lock (P25).  
Shoot.  
4
Smoothly press the shutter button the rest of the way  
down to take the picture.  
Click  
R If the subject is poorly lit, the flash may fire when the pic-  
ture is taken. For information on using the flash when  
lighting is poor, see “N Using the Flash (Intelligent Flash)”  
(P29).  
Thhee SShhuuttter Button  
The shutter button has two positions. Pressing the shutter button halfway sets  
focus and exposure; to shoot, press the shutter button the rest of the way down.  
18  
Basic Photography and Playback  
Viewing Pictures  
Pictures can be viewed in the LCD monitor. When taking important photo-  
graphs, take a test shot and check the results.  
Press the abutton.  
The most recent picture will be displayed.  
1
View additional pictures.  
2
Press the selector right to view pictures in  
the order recorded, left to view pictures in  
reverse order.  
Press the shutter button to exit to shooting  
mode.  
Basic Photography and Playback  
19  
More on Photography  
Shhooottiinngg MMode  
Choose a shooting mode according to the scene or type  
of subject. To select a shooting mode, align the mode  
icon with the mark next to the mode dial.  
P (PROGRAM AE): Select for full control over camera settings,  
including exposure, white balance, and focus mode.  
F (MOVIE): Shoot movies with  
sound (P45).  
M (SCENE RECOGNITION AUTO):  
The camera analyzes the compo-  
sition and selects a scene appro-  
priate to the subject and shoot-  
ing conditions (P16).  
SP1/SP2  
(SCENE  
POSITIONS):  
Choose a scene suited to the  
subject or shooting conditions  
and let the camera do the rest  
(P21).  
B (AUTO): A simple “point-and-  
shoot” mode recommended for  
first-time users of digital cameras.  
D
(NATURAL LIGHT): Capture  
natural lighting under low light  
conditions.  
C(NATURAL & N): The camera takes two shots: one with-  
out the flash and one with.  
20  
Shooting Mode  
SP SCENE POSITION  
The camera offers a choice of “scenes,” each adapted to particular  
shooting conditions or a specific type of subject. Use the ASCENE  
POSITION option in the shooting menu to choose the scene as-  
signed to the SP1 and SP2 positions on the mode dial.  
Scene  
L PORTRAIT  
D BABY MODE  
Description  
Choose for portraits.  
Choose for natural skin tones when taking portraits of infants.  
The shutter is released automatically when Intelligent Face Detection  
detects a smiling face.  
K SMILE&SHOOT  
M LANDSCAPE  
r PANORAMA  
N SPORT  
Choose for daylight shots of buildings and landscapes.  
Take up to three pictures and join them together to form a panorama.  
Choose when photographing moving subjects.  
O NIGHT  
H NIGHT (TRIPOD)  
Choose this mode for poorly lit twilight or night scenes.  
Choose this mode for slow shutter speeds when shooting at night.  
Slow shutter speeds are used to capture the expanding burst of light  
from a firework.  
Choose this mode to record the vivid colors in sunrises and sunsets.  
Choose for crisp, clear shots that capture the brightness of scenes domi-  
nated by shining white snow.  
P FIREWORKS  
Q SUNSET  
R SNOW  
S BEACH  
U PARTY  
V FLOWER  
W TEXT  
Choose for crisp, clear shots that capture the brightness of sunlit beaches.  
Capture indoor background lighting under low-light conditions.  
Choose for vivid close-ups of flowers.  
Take clear pictures of text or drawings in print.  
More on Photography  
21  
Shooting Mode  
r PANORAMA  
In this mode, you can take up to three pictures and join them together to form  
a panorama. Use of a tripod is recommended to assist in composing overlap-  
ping shots. The camera zooms all the way out and zoom remains fixed at the  
widest angle until shooting is complete.  
Select rPANORAMA for SP1 or SP2 (P21).  
1
2
3
Select CAUTO for PMODE in the shooting menu (P60).  
Press the selector up to select a frame. Press the selector left or right to  
highlight a pan direction and press MENU/OK.  
Take a photograph. Exposure and white balance for the panorama are set  
with the first shot.  
4
5
Frame the next shot to overlap with the previous picture by superimpos-  
ing y on + so that they form a solid circle (z). The camera will release the  
shutter automatically.  
Pan direction  
Display after 1st shot  
Shutter released  
22  
More on Photography  
Shooting Mode  
Take the last shot as described in Step 5.  
6
7
R To end shooting and create a panorama after the first or second shot, press the  
multi selector up after completing Step 4 or Step 5 and proceed to Step 7.  
Press MENU/OK to save the picture.  
Q Panoramas are created from multiple frames. The camera may in some cases be  
unable to stitch the frames together perfectly.  
Q The desired results may not be achieved with moving subjects, subjects close to  
the camera, unvarying subjects such as the sky or a field of grass, subjects that are  
in constant motion, such as waves and waterfalls, or subjects that undergo marked  
changes in brightness. Panoramas may be blurred if the subject is poorly lit.  
For Besst Results  
For best results, be careful not to tilt the camera backward or forward or to either  
side and try not to move the camera while y and + are aligned to form a solid circle.  
Printting PPanoramas  
Depending on the page size and the size of the panorama, panoramas may print  
with their edges cropped out or with wide margins at the top and bottom or at  
both sides.  
More on Photography  
23  
Shooting Mode  
Framing Panoorraammaass MManually  
Follow the steps below if the desired results are not achieved with CAUTO se-  
lected for PMODE:  
Select DMANUAL for PMODE in the shooting menu.  
1
2
3
Select a frame and take the first shot.  
Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take  
the next shot, framing it to overlap with the previous picture.  
Guide  
Display after 1st shot  
Frame next shot  
Repeat Step 3 to take the third shot and then press MENU/OK to display the completed pan-  
orama.  
4
5
Press MENU/OK to save the picture.  
24  
More on Photography  
Focus Lock  
To compose photographs with off-center subjects:  
Focus: Position the subject in the focus frame (  
)
1
2
3
and press the shutter button halfway to lock focus  
and exposure. Focus and exposure will remain locked  
while the shutter button is pressed halfway (AF/AE  
lock).  
Recompose: Keep the button pressed halfway.  
Shoot: Press the button all the way down.  
More on Photography  
25  
Focus Lock  
Autoffocus  
Although the camera boasts a high-precision autofocus system, it may be unable to  
focus on the subjects listed below. If the camera is unable to focus, focus on another  
subject at the same distance and use focus lock to recompose the photograph.  
Very shiny subjects such as mirrors or car bodies.  
Subjects that show little contrast with the background  
Fast-moving subjects.  
(for example, subjects in clothing that is the same color  
Subjects photographed through a window or other re- as the background).  
flective object.  
Subjects positioned in front of or behind a high-contrast  
Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a  
light, such as hair or fur.  
Insubstantial subjects, such as smoke or flame.  
subject photographed against a backdrop of highly con-  
trasting elements).  
26  
More on Photography  
d
Exposuure Compeensaation  
To adjust exposure compensation when photo-  
graphing very bright, very dark, or high-contrast  
subjects, press the selector up (d). Press the selec-  
tor up or down to choose an exposure compensa-  
tion value and then press MENU/OK.  
Choose positive (+) values  
to increase exposure  
Choose negative (–) values  
to reduce exposure  
R A dicon and exposure indicator are displayed at settings other than 0. Exposure  
compensation is not reset when the camera is turned off; to restore normal expo-  
sure control, choose a value of 0.  
R Turn the flash off when using exposure compensation.  
R Exposure compensation is available only in mode P.  
More on Photography  
27  
F
Maacro MMooddee ((CClloossee--uups)  
For close-ups, press the selector left (F) and select  
F. When macro mode is in effect, the camera fo-  
cuses on subjects near the center of the frame. Use  
the zoom buttons to compose pictures (P17).  
To exit macro mode, press the selector left (F) and select  
H.  
R Use of a tripod is recommended to prevent blur caused by camera shake.  
R The shadow cast by the lens may appear in photographs taken with the flash at  
very short ranges. Zoom out or increase the distance to the subject.  
28  
More on Photography  
N
Using the Flash (Intellligenntt Flashh)  
When the flash is used, the camera’s Intelligent Flash system instantly analyzes  
the scene based on such factors as the brightness of the subject, its position  
in the frame, and its distance from the camera. Flash output and sensitivity  
are adjusted to ensure that the main subject is correctly exposed while pre-  
serving the effects of ambient background lighting, even in dimly-lit indoor  
scenes. Use the flash when lighting is poor, for example when shooting at  
night or indoors under low light.  
Press the selector right (N) and choose from the fol-  
lowing flash modes:  
Option  
Description  
AUTO/K  
(AUTO FLASH)  
The flash fires when required. Recommended in most situations.  
N/L  
The flash fires whenever a picture is taken. Use for backlit subjects or for natural  
(FORCED FLASH) coloration when shooting in bright light.  
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is  
(SUPPRESSED FLASH) recommended.  
O/M  
Capture both the main subject and the background under low light (note that  
(SLOW SYNCHRO) brightly lit scenes may be overexposed).  
More on Photography  
29  
NUsing the Flash (Intelligent Flash)  
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.  
At slow shutter speeds, kwill appear in the display to warn that pictures may be  
blurred; use of a tripod is recommended.  
R The flash may fire several times with each shot. Do not move the camera until  
shooting is complete.  
R The flash may cause vignetting.  
Red-Eye Reemmovaall  
When Intelligent Face Detection (P32) and red-eye removal (P67) are  
on, red-eye removal is available in auto (K; RED EYE REDUCTION), flash  
on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.  
Red-eye removal minimizes “red-eyecaused when light from the flash is  
reflected from the subject’s retinas as shown in the illustration at right.  
30  
More on Photography  
h
Using the SSelf-Timer  
To use the self-timer, press the selector down (h)  
and choose from the following options:  
Option  
T(OFF)  
Description  
Self-timer off.  
The shutter is released ten seconds after the shutter button is pressed. Use for  
self-portraits. The self-timer lamp on the front of the camera blinks while the  
timer counts down.  
S(10 SEC)  
The shutter is released two seconds after the shutter button is pressed. Use to  
reduce blur caused by the camera moving when the shutter-release button is  
pressed. The self-timer lamp will blink as the timer counts down.  
R(2 SEC)  
More on Photography  
31  
b
Innttelligent Facce Deteeccttiioonn  
Intelligent Face Detection sets focus and exposure for human faces anywhere  
in the frame, preventing the camera from focusing on the background in  
group portraits. Choose for shots that emphasize portrait subjects.  
To use Intelligent Face Detection, press MENU/OK  
to display the shooting menu and select ON for  
bFACE DETECTION. Faces can be detected with  
the camera in vertical or horizontal orientation; if a  
face is detected, it will be indicated by a green bor-  
der. If there is more than one face in the frame, the  
camera will select the face closest to the center;  
other faces are indicated by white borders.  
Q In some modes, the camera may set exposure for the frame as a whole rather than  
the portrait subject.  
Q If the subject moves as the shutter button is pressed, their face may not be in the  
area indicated by the green border when the picture is taken.  
32  
More on Photography  
nFace Recognnition  
The camera can store information on the face and personal  
details (name, relationship, and birth date) of portrait sub-  
jects and assign these subjects priority for Intelligent Face  
Detection or display their names and other information  
during playback.  
Happy Birthday!  
Adding New Faces  
Follow the steps below to add faces to the face recognition database.  
Select REGISTER.  
Select REGISTER for nFACE RECOGNITION in the shooting menu.  
1
R To disable face recognition, select OFF.  
Take a photograph.  
After checking that the subject is facing the camera,  
2
frame the subject using the guides and take the pho-  
tograph.  
R If an error is displayed, take the photograph again.  
More on Photography  
33  
nFace Recognition  
Enter face recognition data  
Press MENU/OK to display face recognition data and enter the following in-  
3
formation:  
NAME: Enter a name of up to 14 characters and press MENU/OK.  
CATEGORY: Choose the option that describes your relationship to the sub-  
ject and press MENU/OK.  
BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.  
R If you zoom in on the face of a person in the face recognition database on their  
birthday, the camera will display their name and the messageHappy Birthday!.  
34  
More on Photography  
nFace Recognition  
Viewing, Editing, and Deleting Existing Data  
Follow the steps below to view, edit, or delete face recognition data.  
Select VIEW & EDIT for nFACE RECOGNITION.  
1
2
3
Select a face.  
View or edit face recognition data.  
The name, category, or birth date can be edited as described in Step 3 of  
“Adding New Faces” (P33). To retake the photo, select REPLACING IM-  
AGE and shoot a new portrait as described above.  
R To delete face recognition data for the selected subject, select ERASE.  
Adding Faces Automatically  
To automatically add frequently-photographed subjects to the face recogni-  
tion database, select ON for AUTO REGISTRATION in the face recognition  
menu. If the camera detects a face that has been photographed many times  
without being added to the database, it will display a message prompting you  
to create a new face recognition entry. Press MENU/OK and enter face recogni-  
tion data.  
R The camera may sometimes fail to recognize new faces automatically. If necessary,  
faces can be added manually using the REGISTER option.  
More on Photography  
35  
nFace Recognition  
Face Recognition  
The camera can store up to eight faces. If you attempt to add a ninth face, a confir-  
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by  
deleting existing data. AUTO REGISTRATION is disabled if there are already data for  
eight faces.  
When Intelligent Face Detection (P32) is on and the frame contains multiple sub-  
jects from the face recognition database, the camera displays the name of the sub-  
ject that will be used to set focus and exposure (the subject shown by the green  
frame). If no name is entered, the camera will show “---. Subjects identified using  
face recognition but not used to set focus and exposure are shown by orange  
frames, other subjects by white frames.  
Q The camera may fail to identify subjects in the face recognition database if they  
are not facing the camera or are only partly in the frame, or if details of the sub-  
jectsfaces or expressions differ markedly from those in the database.  
36  
More on Photography  
More on Playback  
Playback OOpptions  
To view the most recent picture in the LCD monitor, press the abutton.  
Press the selector right to view pictures in the order recorded, left to view  
pictures in reverse order. Keep the selector pressed to scroll rapidly to the  
desired frame.  
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during  
playback.  
IFavorites: Rating Pictures  
To rate the picture currently displayed in full-frame playback, press DISP/BACK  
and press the selector up and down to select from zero to five stars.  
37  
Playback Options  
Playback Zoom  
Select i to zoom in on pictures displayed in single-frame playback; select  
jto zoom out. When the picture is zoomed in, the selector can be used to  
view areas of the image not currently visible in the display.  
Zoom indicator  
Navigation window shows  
portion of image currently  
displayed in LCD monitor  
Press DISP/BACK to exit zoom.  
R The maximum zoom ratio varies with image size. Playback zoom is not available  
with cropped or resized copies saved at a size of a or smaller.  
38  
More on Playback  
Playback Options  
Multi-Frame Playback  
Selecting jwhen a picture is shown full-frame in the LCD monitor displays  
the current image with previous and following images in the background.  
Select j to increase the number of images displayed to two, nine, or one  
hundred, ito view fewer images.  
When two or more images are displayed, use the selector to highlight images  
and press MENU/OK to view the highlighted image full frame. In the nine- and  
hundred-frame displays, use the selector to view more pictures.  
More on Playback  
39  
A
Deleting Piictures  
To delete individual pictures, multiple selected  
pictures, or all pictures, press MENU/OK, select  
AERASE (P65), and choose from the options  
below. Note that deleted pictures can not be re-  
covered. Copy important pictures to a computer  
or other storage device before proceeding.  
Option  
FRAME  
Description  
Press the selector left or right to scroll through pictures and press MENU/OK to delete  
the current picture (a confirmation dialog is not displayed).  
Highlight pictures and press MENU/OK to select or deselect (pictures that are protected  
SELECTED or in a print order are shown by S). When the operation is complete, press DISP/BACK  
FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the  
selected pictures.  
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete  
all unprotected pictures. Pressing DISP/BACK cancels deletion; note that any pictures  
deleted before the button was pressed can not be recovered.  
ALL  
FRAMES  
R Protected pictures can not be deleted. Remove protection from any pictures you  
wish to delete (P68).  
R If a message appears stating that the selected images are part of a DPOF print order,  
press MENU/OK to delete the pictures.  
40  
More on Playback  
b
Search for pictures.  
Immaage SSearch  
Select bIMAGE SEARCH in the playback menu (P65), highlight one of  
the following search criteria, and press MENU/OK:  
BY DATE: Search by date.  
1
BY FACE: Search for faces from the face recognition database.  
BY IFAVORITES: Search by rating.  
BY SCENE: Search by scene.  
BY TYPE OF DATA: Find all still pictures or all movies.  
BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-  
nation.  
Select a search condition. Only pictures that match the search condi-  
tion will be displayed. To delete or protect selected pictures or to view  
the search results in a slide show, press MENU/OK and choose AERASE  
(P40), DPROTECT (P68), or ISLIDE SHOW (P67).  
2
More on Playback  
41  
k
Create books from your favorite photos.  
PhotooBBoook Assist  
Creating a PhotoBook  
Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu  
(P65) and choose from the following options:  
1
SELECT FROM ALL: Choose from all available pictures.  
SELECT BY IMAGE SEARCH: Choose from pictures matching selected search  
conditions (P41).  
R Neither photographs a or smaller nor movies can be selected for photobooks.  
Scroll through the images and press the selector up to select or deselect.  
To display the current image on the cover, press the selector down. Press  
MENU/OK to exit when the book is complete.  
2
3
R The first picture selected becomes the cover image. Press the selector down to  
select a different image for the cover.  
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-  
ing the specified search conditions for the book, choose SELECT ALL). The  
new book will be added to the list in the photobook assist menu.  
Q Books can contain up to 300 pictures.  
Q Books that contain no photos are automatically deleted.  
42  
More on Playback  
kPhotoBook Assist  
Viewing Photobooks  
Highlight a book in the photobook assist menu and press MENU/OK to display  
the book, then press the selector left or right to scroll through the pictures.  
Editing and Deleting Photobooks  
Display the photobook and press MENU/OK. The following options will be dis-  
played; select the desired option and follow the on-screen instructions.  
EDIT: Edit the book as described inCreating a PhotoBook(P42).  
ERASE: Delete the book.  
Photoobooks  
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-  
ware.  
More on Playback  
43  
Viewing Panoramas  
If you press the selector down when a panorama is displayed full frame, the  
camera will play back the picture from left to right. To pause playback, press  
the selector down; press the selector down again to resume. To delete the  
panorama, press the selector up (b) when playback is stopped. To exit to full-  
frame playback, press the selector up while panorama playback is in progress.  
44  
More on Playback  
Movies  
Recordiinngg MMoviess  
Shoot short movies with sound. During recording, zREC  
and the time remaining will be displayed in the LCD moni-  
tor and sound will be recorded via the built-in microphone  
(be careful not to cover the microphone during recording).  
Rotate the mode dial to FMOVIE.  
1
2
3
Press the shutter button all the way down to start recording.  
To end recording, press the shutter button again. Recording ends auto-  
matically when the movie reaches maximum length or memory is full.  
Zoooomm aadjustment  
Zoom can be adjusted while recording is in progress. Select the type of zoom  
available for pMOVIE ZOOM TYPE in the setup menu. Selecting 2OPTICAL  
blocks sound being recorded when zooming.  
45  
Recording Movies  
R Before recording, select a frame size using the OQUALITY option in the shooting  
menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Definition),  
f (640×480) to record standard definition movies, or g (320×240) for longer  
movies.  
R Focus, exposure, and white balance are adjusted automatically throughout record-  
ing. The color and brightness of the image may vary from that displayed before  
recording begins.  
R Sounds made by the camera may be recorded.  
Q The indicator lamp lights while movies are being recorded. Do not open the battery  
chamber during shooting or while the indicator lamp is lit. Failure to observe this  
precaution could prevent the movie from being played back.  
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.  
This is normal and does not indicate a malfunction.  
Q The temperature of the camera may rise if it is used to record movies for an ex-  
tended period or if the ambient temperature is high. This is normal and does not  
indicate a malfunction.  
46  
Movies  
Viewing Movvies  
100-006  
During playback, movies are displayed in the LCD monitor  
as shown at right. The following operations can be per-  
formed while a movie is displayed:  
PLAY  
Option  
Description  
Start/pause Press the selector down to start playback. Press again to  
playback pause.  
End playback/ Press the selector up to end playback. If playback is not in  
delete  
progress, pressing the selector up will delete the movie.  
Press the selector right to advance, left to rewind. If playback  
is paused, the movie will advance or rewind one frame  
each time the selector is pressed.  
Advance/  
rewind  
Press MENU/OK to pause playback and display volume con-  
trols. Press the selector up or down to adjust the volume  
and press MENU/OK to exit. Volume can also be adjusted  
from the setup menu.  
Adjust voolume  
Q Do not cover the speaker during playback.  
Movies  
47  
Connections  
Viewing Pictures on TV  
Connect the camera to a TV to show pictures to a group.  
Turn the camera off and connect an optional A/V cable as shown below.  
1
Connect yellow plug  
to video-in jack  
Insert into  
USB multi-connector  
Connect white  
plug to audio-in jack  
Q When connecting cables, be sure the connectors are fully inserted.  
R Image quality may drop during movie playback.  
R To view high definition movies on a high definition TV, the optional accessory  
is required (P79, 80).  
Tune the television to the video input channel. See the documentation  
supplied with the television for details.  
2
Press the abutton for about a second to turn the camera on. The camera  
3
monitor turns off and pictures and movies are played back on the TV. Note  
that the camera volume controls have no effect on sounds played on the  
TV; use the television volume controls to adjust the volume.  
48  
Printing Pictures via USB  
If the printer supports PictBridge, the camera can be connected  
directly to the printer as shown below and pictures can be printed  
without first being copied to a computer. Note that depending on  
the printer, not all the functions described below may be supported.  
Connect the supplied USB cable as shown and turn the printer on.  
1
Press the abutton for about a second to turn the camera on.  
2
Press the selector left or right to display a picture you wish to print.  
3
Press the selector up or down to choose the number of copies (up to 99).  
4
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a  
confirmation dialog when settings are complete.  
5
Connections  
49  
Printing Pictures via USB  
Press MENU/OK to start printing. Printing can be interrupted by pressing  
DISP/BACK, but note that some printers may not respond immediately. If the  
printer stops before printing is complete, turn the camera off and then on  
again.  
6
After confirming that PRINTING has cleared from the camera display, turn  
the camera off and disconnect the USB cable.  
7
R Pictures can be printed from a memory card that has been formatted in the camera.  
R If no pictures are selected, the camera will print one copy of the current picture.  
R Page size, print quality, and border selections are made using the printer.  
Printinng thee DDaattee ooff RReecoorrding  
To print the date of recording on pictures, press DISP/BACK in the PictBridge display  
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without  
the date of recording, select PRINT WITHOUT DATE).  
50  
Connections  
Printing Pictures via USB  
Printing the DPOF Print Order  
The KPRINT ORDER (DPOF) option in the playback menu can be used to  
create a digital “print order” for PictBridge-compatible printers (P79) or de-  
vices that support DPOF.  
DPOF  
DPOF (Digital Print Order Format) is a standard that allows pictures to be  
printed from “print orders” stored on a memory card. The information in  
the order includes the pictures to be printed and the number of copies of  
each picture.  
Select playback mode and press MENU/OK to display the playback menu.  
1
2
3
Highlight KPRINT ORDER (DPOF) and press MENU/OK.  
Highlight one of the following options and press MENU/OK:  
WITH DATEs: Print the date of recording on pictures.  
WITHOUT DATE: Do not print the date of recording on pictures.  
R Some printers do not support date printing. See the printer manual for details.  
Press the selector left or right to display a picture you wish to add to or  
remove from the print order.  
4
Connections  
51  
Printing Pictures via USB  
Press the selector up or down to choose the number of copies (up to 99).  
To remove a picture from the print order, press the selector down until the  
number of copies is zero.  
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when  
settings are complete.  
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print  
order.  
R Print orders can contain a maximum of 999 pictures.  
R If a memory card is inserted containing a print order created by another camera,  
a message will be displayed. Create a new print order as described above.  
52  
Connections  
Viewingg Picturreess oonn aa CCoommppuutter  
The supplied software can be used to copy pictures to a computer, where  
they can be stored, viewed, organized, and printed. Before proceeding, install  
the software as described below. Do NOT connect the camera to the computer  
until installation is complete.  
Windows: Installing MyFinePix Studio  
Confirm that the computer meets the following system requirements:  
1
Windows 7*  
Windoows Vista*  
Windows XP*  
2GHz Pentium 4 or  
better  
CPU  
3GHz Pentium 4 or better  
RAM  
Free disk space  
1GB or more  
15GB or more  
512MB or more  
2GB or more  
• 1024×768 pixels or more with 24-bit color or better  
• A graphics processing unit (GPU) that supports DirectX 7 or later  
Video  
• Built-in USB port recommended. Operation is not guaranteed with other  
USB ports.  
Other  
• Internet connection (broadband recommended) required to install .NET  
Framework (if necessary), to use auto update feature, and when performing  
such tasks as sharing pictures on-line or via e-mail.  
* Other versions of Windows are not supported. Only pre-installed operating systems are  
supported; operation is not guaranteed on home-built computers or computers that have  
been upgraded from earlier versions of Windows.  
Start the computer. Log in to an account with administrator privileges be-  
fore proceeding.  
2
Connections  
53  
Viewing Pictures on a Computer  
Exit any applications that may be running and insert the installer CD in a  
CD-ROM drive.  
3
Windoows 7/Wiindows Vista  
If an AutoPlay dialog is displayed, click SETUP.EXE. AUser Account Controldia-  
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).  
The installer will start automatically; click Install MyFinePix Studio and  
follow the on-screen instructions to install MyFinePix Studio.  
If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly  
If the installer does not start automatically, select Computer or My Computer  
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX  
CD window and double-click setup or SETUP.EXE.  
If prompted to install Windows Media Player, DirectX, or .NET Framework,  
follow the on-screen instructions to complete installation.  
4
Remove the installer CD from the CD-ROM drive when installation is com-  
plete. Store the installer CD in a dry location out of direct sunlight in case  
you need to re-install the software.  
5
Installation is now complete. Proceed toConnecting the Camera(P57).  
54  
Connections  
Viewing Pictures on a Computer  
Macintosh: Installing FinePixViewer  
Confirm that the computer meets the following system requirements:  
1
CPU  
PowerPC or Intel  
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.  
com/support/digital_cameras/compatibility/ for more information)  
OS  
RAM  
256MB or more  
A minimum of 200MB required for installation with 400MB available when  
FinePixViewer is running  
800×600 pixels or more with thousands of colors or better  
Free disk space  
Video  
Built-in USB port recommended. Operation is not guaranteed with other USB  
ports.  
Other  
After starting the computer and quitting any applications that may be run-  
ning, insert the installer CD in a CD-ROM drive and double-click Installer  
for Mac OS X.  
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start  
installation. Enter an administrator name and password when prompted  
and click OK, then follow the on-screen instructions to install FinePixViewer.  
Click Exit to quit the installer when installation is complete.  
Connections  
55  
Viewing Pictures on a Computer  
Remove the installer CD from the CD-ROM drive. Note that you may be  
4
unable to remove the CD if Safari is running; if necessary, quit Safari before  
removing the CD. Store the installer CD in a dry location out of direct sun-  
light in case you need to re-install the software.  
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,  
and select Preferences… from the Image Capture application menu. The  
Image Capture preferences dialog will be displayed; choose Other… in  
the When a camera is connected, open menu, then select FPVBridge  
in theApplications/FinePixViewer”folder and click Open. Quit Image Cap-  
ture.  
5
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”  
folder and start Image Capture. The camera will be listed under DEVICES;  
select the camera and choose FPVBridge from the Connecting this cam-  
era opens menu and click Choose. Quit Image Capture.  
Installation is now complete. Proceed toConnecting the Camera(P57).  
56  
Connections  
Viewing Pictures on a Computer  
Connecting the Camera  
If the pictures you wish to copy are stored on a memory card, insert the  
card into the camera.  
1
R Windows users may require the Windows CD when starting the software for  
the first time.  
Q Loss of power during transfer could result in loss of data or damage to the mem-  
ory card. Charge the battery before connecting the camera.  
Turn the camera off and connect  
the supplied USB cable as shown,  
making sure the connectors are  
fully inserted. Connect the cam-  
era directly to the computer; do  
not use a USB hub or keyboard.  
2
Press the abutton for about a second to turn the camera on. MyFinePix  
Studio or FinePixViewer will start automatically; follow the on-screen in-  
structions to copy pictures to the computer. To exit without copying pic-  
tures, click Cancel.  
3
R If the software does not start automatically, it may not be correctly installed.  
Disconnect the camera and reinstall the software.  
Connections  
57  
Viewing Pictures on a Computer  
For more information on using the supplied software, start the application  
and select the appropriate option from the Help menu.  
Q If a memory card containing a large number of images is inserted, there may be a  
delay before the software starts and you may be unable to import or save images.  
Use a memory card reader to transfer pictures.  
Q Make sure that the computer does not display a message stating that copying is in  
progress and that the indicator lamp is out before turning the camera off or discon-  
necting the USB cable (if the number of images copied is very large, the indicator  
lamp may remain lit after the message has cleared from the computer display).  
Failure to observe this precaution could result in loss of data or damage to the  
memory card.  
Q Disconnect the camera before inserting or removing memory cards.  
Q In some cases, it may not be possible to access pictures saved to a network server  
using the supplied software in the same way as on a standalone computer.  
Q The user bears all applicable fees charged by the phone company or Internet ser-  
vice provider when using services that require an Internet connection.  
58  
Connections  
Viewing Pictures on a Computer  
Disconnecting thhee CCamera  
After confirming that the indicator lamp is out, turn the camera off and disconnect  
the USB cable.  
Uninstalling the Supplied Softtwwaarree  
Only uninstall the supplied software when it is no longer required or before begin-  
ning reinstallation. After quitting the software and disconnecting the camera, drag  
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash  
in the Finder menu (Macintosh), or open the control panel and use “Programs and  
Features(Windows 7/Windows Vista) orAdd or Remove Programs(Windows XP) to  
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may  
be displayed; read the contents carefully before clicking OK.  
Connections  
59  
Menus  
Using the MMenus: Shhoooottiinngg MMode  
Using the Shooting Menu  
To display the shooting menu, press MENU/OK in  
shooting mode. Highlight items and press the se-  
lector right to view options, then highlight an op-  
tion and press MENU/OK. Press DISP/BACK to exit when  
settings are complete. The options available vary with the shooting mode  
selected.  
Shooting Menu Options  
ASCENE POSSITION  
(SP1 defaults to r, SP2 to K)  
Choose a scene for the current scene position mode (SP1 or SP2; P21).  
NISO  
(defaults to AUTO)  
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-  
tling may appear in pictures taken at high sensitivities.  
100  
Bright  
ISO  
Scene  
3200  
Dark  
Less noticeable  
Nooiissee ((mmottling)  
More noticeable  
Option  
Description  
Sensitivity is adjusted automatically in response to shooting condi-  
tions.  
AUTO  
3200 / 16000 / 800 / 400 /  
200 / 100  
Sensitivity is set to the specified value, which is shown in the display.  
60  
Using the Menus: Shooting Mode  
OIMAGE SIZE  
(defaults to O 4:3)  
Choose the image size and aspect ratio at which pictures are record-  
ed. Large pictures can be printed at large sizes with no drop in quality,  
while small pictures require less memory, allowing more pictures to be  
recorded.  
O4 : 3  
Size Aspect ratio  
Size Versus Aspect Ratio  
Size  
Option  
O
Prints at sizes up to  
34×25cm (13.5×10in.)  
P
24×18cm (9.5×7in.)  
17×13cm (7×5in.)  
Q
Aspect ratio  
4 : 3: Pictures have the same  
proportions as the camera  
display.  
3 : 2: Pictures have the same 16 : 9: Suited for display on  
proportions as a frame of  
High Definition (HD) devices.  
35mm film.  
3
2
9
4
3
16  
Menus  
61  
Using the Menus: Shooting Mode  
TIMAGE QUALITY  
(defaults to N)  
Choose how much image files are compressed.  
Option  
Description  
FINE  
Low compression. Select for higher image quality.  
NORMAL  
High compression. Select this option to store more pictures.  
PFINEPIX COLOR  
(defaults to <)  
Enhance contrast and color saturation or take pictures in black and white.  
Option  
Description  
c F-STANDARD Standard contrast and saturation. Recommended in most situations.  
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens  
and blues in landscapes.  
a F-CHROME  
b F-B&W  
Take pictures in black and white.  
R Seettttiinnggs otheer than c F-STANDARD arre shownn byy aann iiccoonn iinn tthe LCD monitor.  
R Depending on the subject, the effects of a F-CHROME may not be visible in the LCD  
monitor.  
62  
Menus  
Using the Menus: Shooting Mode  
DWHITE BAALLANCE  
For natural colors, choose a setting that matches the light source.  
(defaults to AUTO)  
Option  
AUTO  
i
Description  
White balance adjusted automatically.  
For subjects in direct sunlight.  
j
For subjects in the shade.  
k
Use underdaylightfluorescent lights.  
Use underwarm whitefluorescent lights.  
Use undercool whitefluorescent lights.  
Use under incandescent lighting.  
l
m
n
R Reessuullttss vvaarryy wwiitthh sshooting cconditionss. Play pictures back after shooting ttoo cchheecckk ccoolloorrss iinn  
the LCD monitor.  
RCONTINUOUS  
(defaults to OFF)  
Capture motion in a series of pictures.  
Option  
Description  
ITOP 3 The camera takes up to 3 pictures while the shutter button is pressed.  
OFF One photograph is taken each time the shutter-release button is pressed.  
R Focus aand expoosure aarre deteerrmined bby the first frame in each seeries.  
R Thhee ffllaasshh ttuurrnnss off automatically. Thhee pprreeviously selected flash mode is restored when OFF is  
selected for RCONTINUOUS.  
R Frame rate varies with shutter speed.  
R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.  
Menus  
63  
Using the Menus: Shooting Mode  
bFACE DETECTION  
Choose whether the camera automatically detects and sets focus and exposure for human por-  
trait subjects (P32).  
FAF MODE  
This option controls how the camera selects the focus area. Regardless of the option selected,  
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.  
Option  
Description  
rCENTER  
The camera focuses on the subject in the center of the frame.  
Position the subject in the center focus area and press the selector left. Focus will  
track the subject as it moves through the frame.  
xTRACKING  
R Note that iin x mode, tthe camerraa focuses ccontinuoussly, increeaasing the drain on the batteries,  
and that the sound of the camera focusing may be audible.  
nFACE RECOGGNITION  
Add portrait subjects to the face recognition database. These subjects will be given priority  
during Intelligent Face Detection, and their names and other information can be viewed during  
playback (P 33).  
PMODE  
(defaults to C)  
Choose how panoramas are framed (P22).  
OQUALITY  
(defaults to h)  
Choose a frame size for movies (P46).  
64  
Menus  
Using the MMenus: Playbbaacckk MMode  
Using the Playback Menu  
To display the playback menu, press MENU/OK in  
playback mode. Highlight items and press the  
selector right to view options, then highlight an  
option and press MENU/OK. Press DISP/BACK to exit  
when settings are complete.  
Playback Menu Options  
kPHOTOBOOK ASSIST  
Create books from your favorite photos (P42).  
bIMAGE SEARCH  
Search for pictures (P41).  
AERASE  
Delete all or selected pictures (P40).  
Menus  
65  
Using the Menus: Playback Mode  
jMARK FOR UPLOAD TO  
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).  
Selecting Pictures for Upload  
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and  
movies for upload to Facebook.  
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press  
DISP/BACK to exit when all the desired pictures are selected.  
2
R Only movviieess ccaann bbee sseelleected for upload to YouTube.  
R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.  
RESET ALL: Deselecting All Pictures  
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a  
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the  
operation is complete.  
Uploading Pictures (Windows Only)  
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix  
Studio.  
Select with camera  
Upload from computer  
For information on installing MyFinePix Studio and connecting the camera to a computer, see  
“Viewing Pictures on a Computer(P53).  
66  
Menus  
Using the Menus: Playback Mode  
ISLIDEE SHOW  
(defaults to MULTIPLE)  
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.  
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at  
any time by pressing MENU/OK.  
Option  
NORMAL  
Description  
Press selector left or right to go back or skip ahead one frame. Select FADE-IN  
for fade transitions between frames.  
FADE-IN  
NORMAL g  
FADE-IN g  
MULTIPLE  
As above, except that camera automatically zooms in on faces selected with  
Intelligent Face detection.  
Display several pictures at once.  
R Thhee ccaammeerraa will not turn off automatically while a sllide shooww iiss iinn pprrooggress.  
BRED EYE RREMOVAL  
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face  
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-  
eye is detected, the image will be processed to create a copy with reduced red-eye.  
Display the desired picture.  
1
Select BRED EYE REMOVAL in the playback menu.  
2
Press MENU/OK.  
3
R Reedd eeyyee mmaayy nnoott bbee rreemmooved iff the camerra is unable to detect a face or thhee ffaaccee iiss iinn pprrooffiillee..  
Reessuullttss mmaayy ddiiffferr dependiing on the sscene. Reedd eeyyee ccaann nnoott bbee rreemmooved from pictures that  
have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..  
R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..  
R Copies created with BREDD EYE REMMOVAL arre indiccatedd bby a eicon during playback.  
Menus  
67  
Using the Menus: Playback Mode  
DPROTECT  
Protect pictures from accidental deletion.  
Select DPROTECT in the playback menu.  
1
2
Highlight one of the following options and press MENU/OK:  
FRAME: Protect selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.  
SET ALL: Protect all pictures.  
RESET ALL: Remove protection from all pictures.  
Q Protected pictures will be deleted when the memory card is formatted (P73).  
GCROP  
Create a cropped copy of the current picture.  
Display the desired picture.  
1
Select GCROP in the playback menu.  
2
3
Use the zoom control to zoom in and out and use the selector to scroll the picture until the  
desired portion is displayed.  
Press MENU/OK to display a confirmation dialog.  
4
5
Press MENU/OK again to save the cropped copy to a separate file.  
R Larger crrops prroducee larggeer copiies; alll coppiies haavve an asspect rratioo oof 4:33.. If thee sizee oof the ffinal  
copyy wwill be a, OK will be diisplayed iinn yyeelllloow.  
68  
Menus  
Using the Menus: Playback Mode  
ORESIZE  
Create a small copy of the current picture.  
Display the desired picture.  
1
Select ORESIZE in the playback menu.  
2
3
4
Highlight a size and press MENU/OK to display a confirmation dialog.  
Press MENU/OK to save the resized copy to a separate file.  
R Thhee ssiizzeess aavailable vary with the size of the originnal image.  
CIMAGE ROTATE  
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD  
monitor.  
Display the desired picture.  
1
Select CIMAGE ROTATE in the playback menu.  
2
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-  
wise.  
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it  
is played back on the camera.  
4
R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P68).  
R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.  
Menus  
69  
Using the Menus: Playback Mode  
nERASE FACE RECOG.  
Remove face recognition links from the current image. When this option is selected, the cam-  
era will zoom in on an area in the current picture that it has matched with a face in the face  
recognition database. If the match is not correct, press MENU/OK to remove the link to the face  
recognition database.  
R Face reccognitiioon links ccan not bbe removed from copies with a size off a or smaller.  
KPRINT ORDER (DPOF)  
Select pictures for printing on DPOF- and PictBridge-compatible devices (P51).  
70  
Menus  
The Setup MMenu  
Using the Setup Menu  
Display the setup menu.  
1.1 Press MENU/OK to display the menu for the cur-  
1
rent mode.  
1.2 Press the selector left to highlight the tab for  
the current menu.  
Tab  
1.3 Press the selector down to highlight X.  
1.4 Press the selector right to place the cursor in the setup menu.  
Adjust settings.  
2
Highlight items and press the selector right to view options, then high-  
light an option and press MENU/OK. Press DISP/BACK to exit when settings  
are complete.  
Menus  
71  
The Setup Menu  
Setup Menu Options  
FDATE/TIME  
Set the camera clock (P15).  
NTIME DIFFERENCE  
(defaults to h)  
Switch the camera clock instantly from your home time zone to the local time at your destina-  
tion when traveling. To specify the difference between local time and your home time zone:  
Highlight g LOCAL and press the selector right.  
1
2
Use the selector to choose the time difference between local time and your home time zone  
in increments of 15 minutes.  
Press MENU/OK.  
3
To switch between local time and your home time zone, highlight g LOCAL or h HOME and  
press MENU/OK.  
Option  
Description  
hHOME  
Switch to the time currently selected for FDATE/TIME (see above).  
Switch to local time. If this option is selected, g and the time and date will  
be displayed in yellow for three seconds each time the camera is turned on.  
gLOCAL  
La  
(defaults to ENGLISH)  
Choose a language (P97).  
oSILENT MODE  
(defaults to OFF)  
Select ON to disable the speaker and flash in situations in which camera sounds or lights may be  
unwelcome (note that the fl ash will still fi re in Cmode).  
72  
Menus  
The Setup Menu  
RRESET  
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,  
and QVIDEO SYSTEM to default values.  
Highlight RRESET and press the selector right to display a confirmation dialog.  
1
2
Highlight OK and press MENU/OK.  
KFORMAT  
This option will format the memory card. When a memory card is inserted in the camera, select  
OK to begin formatting.  
Q All data—iincluuding pprotectedd picturess—will be deleted from the memmory card.. Be sure im-  
portant files have been copied to a comppuutteerr oorr ootthheerr ssttoorraaggee ddeevice.  
Q Do nott open tthe baattteryy--chambber cover during formatting.  
AIMAGE DISP.  
(defaults to 1.5 SEC)  
Choose how long pictures are displayed in the LCD monitor after shooting.  
Option  
3 SEC  
Description  
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).  
Colors may differ slightly from those in the final image.  
1.5 SEC  
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.  
OFF  
Pictures are not displayed after shooting.  
R OFF has no effect in continuous shooting mode.  
Menus  
73  
The Setup Menu  
BFRAME NO.  
(defaults to CONT.)  
New pictures are stored in image files named using a four-digit file  
number assigned by adding one to the last file number used. The file  
number is displayed during playback as shown at right. BFRAME NO.  
controls whether file numbering is reset to 0001 when a new memory Directory  
Frame number  
100-0001  
File  
card is inserted or the current memory card is formatted.  
number  
number  
Option  
Description  
Numbering continues from the last file number used or the first available  
file number, whichever is higher. Choose this option to reduce the num-  
ber of pictures with duplicate file names.  
CONTINUOUS  
Numbering is reset to 0001 after formatting or when a new memory card  
is inserted.  
RENEW  
R If the frame number reaches 999-9999, the shutter release will be disabled (P90).  
R Seelleecttiing RRESET ((P73) setss BFRAME NO. tto CONTINUOUS but doees not reeset the  
file number.  
R Frame numbers for pictures taken with other cameras may differ.  
GOPERATTIONN VVOL.  
(defaults to c)  
Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF  
(mute) to disable control sounds.  
HSHUTTEER VOLUME  
(defaults to c)  
Adjust the volume of the sounds produced when the shutter is released. Choose eOFF (mute)  
to disable the shutter sound.  
74  
Menus  
The Setup Menu  
eSHUTTER SOUND  
(defaults to i)  
Choose the sound made by the shutter.  
IPLAAYYBBAACCKK VVOLUME  
(defaults to 7)  
Adjust the volume for movie playback.  
JLCD BRIGHTNESS  
(defaults to 0)  
Control the brightness of the display.  
R In modes other than P, display brightness is automatically adjusted during sshhoooottiinngg iinn rree--  
sponse to ambient lighting conditions, regardless of the option selected for JLCD BRRIGHT-  
NESS.  
ELCD MODE  
(defaults to UON)  
Choose whether the display automatically dims to save power.  
MAUTO PPOWER OFF  
(defaults to 2 MIN)  
Choose the length of time before the camera turns off automatically when no operations are  
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned  
off manually. Note that in some situations the camera turns off automatically even when OFF  
is selected.  
LDUAL IS MODE  
(defaults to l)  
Enable image stabilization during shooting (l CONTINUOUS) or only when the shutter but-  
ton is presssed halfwway (m SHOOTING ONLY). OFF turnns image sttabilizattion off.. We recom-  
mend that you turn dual IS off when using a tripod.  
Menus  
75  
The Setup Menu  
BRED EYE RREMOVAL  
(defaults to ON)  
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face  
Detection.  
R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..  
mBLINK DETECTION  
(defaults to ON)  
Choose ON to activate blink detection. If an option other than OFF is selected for AIMAGE  
DISP. (P73), a warning will be displayed if the camera detects subjects who may have blinked  
when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the f button  
to zoom in on these subjects.  
R Blink deetecttiion is nnot peerformed iff the ccamerraa failss to deetect a facee or whhen OFF iis selected  
for AIMAGE DISP..  
76  
Menus  
The Setup Menu  
DDIGITAL ZOOM  
(defaults to OFF)  
If ON is selected, selecting iat the maximum optical zoom position will trigger digital zoom,  
further magnifying the image.  
Thhe Zoooomm IInnddicattoor  
j
j
i
DIGITAL ZOOM on  
Optical zoom  
Optical zoom  
Digital zoom  
i
DIGITAL ZOOM off  
Q Digital zooom prrooducess lower quality images than optical zoom.  
pMOVIE ZOOM TYPE  
(defaults to 1)  
Choose the type of zoom available during movie recording.  
R Digital zooom prrooducess lower quality images than optical zoom.  
R Soouunndd iiss nnoott rreeccoorrddeedd wwhhen opttical zzoom iss used.  
Menus  
77  
The Setup Menu  
nSAVE ORG IMAGE  
(defaults to OFF)  
Select ON to save unprocessed copies of pictures taken with red-eye removal.  
OBACKGROUNND COLOORR  
Choose a color scheme.  
cGUIDANCE DISPPLLAY  
(defaults to ON)  
Choose whether to display tool tips.  
QVIDEO SSYSTEM  
(defaults to NTSC)  
Choose a video mode for connection to a TV.  
Option  
NTSC  
Description  
Select this mode for connection to video devices in North America, the Carib-  
bean, parts of Latin America, and some East Asian countries.  
Select this mode for connection to video devices in the United Kingdom and  
much of Europe, Australia, New Zealand, and parts of Asia and Africa.  
PAL  
78  
Menus  
Technical Notes  
Oppttiioonnaall AAcccesssoories  
The camera supports a wide range of accessories from FUJIFILM and other  
manufacturers.  
DIGITAL CAMERA  
FINEPIX  
T300/T200/T190 Series  
Printing  
Audio/Visual  
A/V cable (optional)  
USB cable  
(supplied)  
TV*  
PictBridge-compatible  
printer*  
SD/SDHC  
memory card  
HDMI cable  
(sold separately)  
HDTV*  
Printer*  
HDP-L1  
HD player  
Computer Related  
USB cable (supplied)  
SD card slot or card reader  
Computer*  
* Available separately.  
79  
Optional Accessories  
Accessories from FUJIFILM  
The following optional accessories are available from FUJIFILM. For the lat-  
est information on the accessories available in your region, check with your  
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_  
cameras/index.html.  
Recharggeeable NP-45A: Additional large-capacity NP-45A rechargeable  
Li-ion batteries batteries can be purchased as required.  
BC-45W: Replacement battery chargers can be purchased  
as required. The BC-45W charges an NP-45A battery in  
about 120 minutes at +20°C (+68°F).  
Battery  
chargers  
A/V cable  
AV-C1: Use for viewing pictures on TV.  
HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-  
nect to a High Definition (HD) TV to view photographs  
and movies from SD/SDHC memory cards.  
HD players  
80  
Technical Notes  
Caring for the Camera  
To ensure continued enjoyment of the product, observe the following pre-  
cautions.  
Storage and Use  
If the camera will not be used for an Water and Sand  
extended period, remove the battery Exposure to water and sand can also  
and memory card. Do not store or damage the camera and its internal  
use the camera in locations that are:  
• exposed to rain, steam, or smoke  
• very humid or extremely dusty  
circuitry and mechanisms. When us-  
ing the camera at the beach or sea-  
side, avoid exposing the camera to  
• exposed to direct sunlight or very water or sand. Do not place the cam-  
high temperatures, such as in a era on a wet surface.  
closed vehicle on a sunny day  
Condensation  
• extremely cold  
Sudden increases in temperature,  
• subject to strong vibration  
such as occur when entering a heated  
• exposed to strong magnetic fields,  
building on a cold day, can cause con-  
such as near a broadcasting anten-  
densation inside the camera. If this  
na, power line, radar emitter, motor,  
occurs, turn the camera off and wait  
transformer, or magnet  
an hour before turning it on again. If  
• in contact with volatile chemicals  
condensation forms on the memory  
such as pesticides  
card, remove the card and wait for the  
• next to rubber or vinyl products  
condensation to dissipate.  
Technical Notes  
81  
Caring for the Camera  
Cleaning  
Use a blower to remove dust from the lens and LCD monitor, then gently wipe  
with a soft, dry cloth. Any remaining stains can be removed by wiping gently  
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-  
cleaning fluid has been applied. Care should be taken to avoid scratching the  
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.  
Do not use alcohol, thinner, or other volatile chemicals.  
Traveling  
Keep the camera in your carry-on baggage. Checked baggage may suffer  
violent shocks that could damage the camera.  
82  
Technical Notes  
Troubleshooting  
Problems and Solutions  
Power and Battery  
Problem  
Solution  
Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery  
(P8).  
Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P8).  
Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chhaambbeerr ccoovveerr ((P9).  
The cameraa does noot  
turn on.  
Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert  
it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
The battery runs down Q is selected for shooting mode: Select B mode to reduce the drain on the battery  
quickly.  
(P20).  
x TRACKING is selected for FAF MODE: Seelectt a diffferent AF mode (P64).  
Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery.  
The cameraa turns off  
suddenly.  
Charge the battery ((P6) orr iinsertt a fullly-charged spare battery (P8).  
Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P6).  
Charging is slow.  
Charge the battery at room temperaturre (Pvi).  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.  
Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to sstabiliize (P 99).  
The charging lamp lights,  
but the battery does not  
charge.  
83  
Problems and Solutions  
Menus and Displays  
Problem  
Solution  
Menus and displays are  
not inn English.  
Select ENGLISH for La (P15, 72).  
Shooting  
Problem  
Solution  
Memory is full: Insert a new memory carrd or ddeletee pictures (P9, 40).  
Memory is not formatted: Format the memory caard (P73).  
Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.  
Noo ppiiccture is taken when Thhee memory cardd iiss ddaamaged: Insert a new memory card (P9).  
the shutter button is  
pressed.  
Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery  
(P8).  
Thhee ccaammeerraa hhaass ttuurrnneedd ooffff aauuttoommaattiiccaalllly: Turn the camerra on (P13).  
Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until  
the indicattor lampps turnss off (P3).  
The LCD monitor goes  
dark aftter shhooting.  
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P29).  
Thhee ssuubbjjeecct is close to the camera: Select macro mode (P28).  
Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P28).  
Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P25).  
The cameraa does noot  
focus.  
Macro mode is not  
available  
Choose a diffeerreennt shooting mode (P20).  
Intelligent Face Detection Intellligennt Facee Detecction iis nnoott aavvaaiillaabbllee iinn tthhee ccuurrrrent shhoottiinngg mmooddee: Choose a ddiffer-  
is not available. ent shooting mode (P20).  
84  
Troubleshooting  
Problems and Solutions  
Problem  
Solution  
Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove  
the obsttructions.  
Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that  
the subject’s face occupiees a laarrger area off the frame (P32).  
Noo fface is detected.  
Thhee ssuubbjjeeccts head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.  
Thhee ccaamera is tilted: Keep the camera leevel (P17).  
Thhee ssuubbjjeeccttss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.  
Wrong subject is  
selected.  
The selected subject is closer to the center of the frame than the main subject. Recompose tthhee  
picture or turn face detection off and frame the picture using focuus lockk (P25).  
Thhee ffllash is not available in thee current shooting mode: Choose a diffeerreenntt sshhooooting mode  
(P20).  
Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery  
(P8).  
The flash does not fire.  
Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P63).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).  
Thhee ffllash is off (P): Choose a diffeerreent flash mode (P29).  
Thhee ddeessireedd ffllaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhe curreenntt sshhoooottiinngg mmooddee: Choose a diffeerent  
shooting mode (P20).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).  
Some flash modes are  
not available.  
Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P97).  
Thhee ffllaasshh wwindow is obstructed: Hoolldd tthhee ccamera correctly (P17).  
Thhee ccaamera is zoomed out: Zoom the cameera in (P17).  
The flash does not fully  
light the subject.  
Thhee lleennss iiss ddiirrtty: Clean the lens (P82).  
Thhee lleens is blocked: Keep objects away from the lens (P17).  
sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus  
before shooting (P88).  
Pictures are blurred.  
kis displayed during shooting: Use the flash or a tripod (P30).  
Troubleshooting  
85  
Problems and Solutions  
Problem  
Solution  
This is normaal wheenn slow sshutteer speeeds are seleccted att high tteemmppeerraattuurreess aanndd ddooeess nnoott iinnddiiccaattee  
a malfunction.  
Pictures are mottled.  
Vertical lines appear in The caammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh tteemmppeerraattuurreess.. TTuurrnn tthhee ccaammeerraa ooffff aanndd wwaaiitt ffoorr  
pictures. it to cool down.  
“Smear”in the form of Vertical purple or white lines may appear after tthe ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh  
vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD  
lines appears in the  
display.  
image seensorss and ddooes nott indiccaattee aa mmaallffuunnccttiioonn.. TThheessee lliinneess aarree rreeccoorrddeedd iinn mmoovviieess bbuutt ddoo nnoott  
appear in photographs. Avoid framing bright objects when filming movies.  
Playback  
Problem  
Solution  
Pictures are grainy.  
The pictures were taken with a different make or model of camera.  
Playback zoom is unavail-  
able.  
The pictures were created using ORESIZE or with a different make or model of camera.  
Playback volume is too low: Adjust playback volume (P75).  
Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P17, 45).  
Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P47).  
When 2OPTICAL is seelecteed for pMOOVIE ZOOM TYPE, zoooming bblocks  
soundd beinngg rrecoorded: Select 1DIGITAL for pMOVIE ZOOM TYPPE (P77).  
Noo ssoouund in movie  
playback.  
Selected pictures are not Some of the pictures selected foorr ddeelleettiioonn aarree pprrootteecctteedd.. RReemmoovvee pprrootteeccttiioonn uussiinngg tthhee ddeevviiccee wwiitthh  
deleted  
which it was originally applied (P68).  
File numbering is  
The batterry--cchhamber cover was opened while the camerra was on.. Turn the ccaammeerraa ooffff bbeeffore  
unexpectedly reset.  
opening thhe baatttteerryy-chamberr ccoovveerr ((P13).  
86  
Troubleshooting  
Problems and Solutions  
Connections/Miscellaneous  
Problem  
Solution  
Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera pproperlly (P48).  
An A/V cable was connected dduring movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--  
back has ended.  
Noo ppiiccture or sound.  
Input on the television is set to “TV”: Set input to “VIDEO.  
Thhee camera is not sett to tthhee ccoorrrrect viiddeeoo ssttaannddaarrd: Match the camerra QVIDEO SYS-  
TEM setting to the TV (P78).  
Thhee vvoolume on the TV is too low: Adjust the volume.  
Noo coolor  
Match the cammera QVIDEO SYSTEM setting to the TV (P78).  
The computer does not  
recognize the camera.  
Be sure the cameraa and coomputter aree correctly connected (P57).  
Pictures caan not bbe  
printed.  
Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P49).  
Thhee pprrinter is off: Turn the printer on.  
Only one copy is printed/  
the date is not printed.  
The printer is not PictBriidge commpatible.  
Temporary camera malfunction: Remove and reinsert the battery (P8).  
Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery  
(P8).  
The cameraa is unree-  
sponsive.  
The cameraa does noot  
function as expected.  
Remove and reinsert the battery (P8). If the problem persists, contact your FUJIFILM dealer.  
Noo sound.  
Turn silent mode off (P72).  
Troubleshooting  
87  
Warning Meessages and DDissplays  
The following warnings are displayed in the LCD monitor:  
Warning  
B(red)  
A(blinks red)  
k
Description  
Low batttery. Charge the battery (P6) or iinsert aa fullyy-charged spare battery (P8).  
Battery eexhausteed. Charge the battery (P6) or inseert a fullly-charged spare battery (P8).  
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.  
The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:  
Use fooccuss lock to focus on annother suubject at the same distance, then recompose the picture  
(P25).  
s
(displayed in red with red  
focus frame)  
Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P28).  
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. IIff tthhee ssuubbjjeecctt  
displayed in red  
is dark, use the flash (P29).  
FOCUS ERROR  
TURN OFF THE CAMERA  
AND TURN ON AGAIN  
Camera malfunction or moving parts of lens oobbssttrruucctteedd.. TTuurrnn tthhee ccaammeerraa ooffff aanndd tthheenn oonn aaggaaiinn,,  
takiinngg ccare not to touch the lens. If the message persists, contact a FUJIFILM dealer.  
Thhee mmeemmoorryy ccaarrdd iiss nnoott ffoorrmmaatttteedd oorr wwaass ffoorrmmaatttteedd iinn aa ccoommppuutteerr oorr ootthheerr ddee--  
vice: Format the memory caard usinng the KFORMAT option in the cameera settuup menu  
(P73).  
Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff  
the message is repeated, format the card (P73). If the message persists, replace tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
CARD NOT INITIALIZED  
PROTECTED CARD  
BUSY  
The memory caard is locked. Unlock the ccard (P9).  
The memory caard is inccorrecttly formatted. Use the cammera to foormat the card (P73).  
88  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
The memory card iss not formatted for use in the camera. Format the carrd (P73).  
The memory caard contaacts require cleaning or the memoryy ccard is damaged. Clleeaann tthhee ccoonnttaaccttss  
with a softt,, ddry clotthh. If the mmessage is repeated, foorrmmaatt tthhee ccaarrdd ((P73). If the message  
persists, replace the card.  
CARD ERROR  
Incompatible memory card. Usse a compatible card (P10).  
Camera malfunction. Contact a FUJIFILM dealer.  
The memory cardd is full annd picturrees can not bbee recordedd or copieedd. Delete pictures or insert a  
memory cardd with moore freee space.  
bMEMORY FULL  
Memoryy card erroorr oorr ccoonnnneeccttiioonn erroorr: Reinsert the card or turn the camera off and then  
on again. If the message persists, contact a FUJIFILM dealer.  
WRITE ERROR  
Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert  
a memory cardd with moore freee space.  
Thhee memory cardd iiss nnoot formatted: Format the memory card (P73).  
Thhee ffiile is corrupt or was not crreated with the camera: The file can nnot be viiewed.  
Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff  
the message is repeated, format the card (P73). If the message persists, replace tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
READ ERROR  
Troubleshooting  
89  
Warning Messages and Displays  
Warning  
Description  
The camerra has run out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee  
memory cardd and selleect RENEW for BFRAME NO.. TTake a piccture to rreset frrame num-  
bering to 100-0001, then select CONTINUOUS for BFRRAME NO. (P74).  
FRAME NO. FULL  
PRESS AND HOLD  
THE DISP BUUTTON TO  
DEACTIVATE SILENT MODE  
An attempt was made to choose a flash mode or adjust the volume with the cameera in ssilent  
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P72).  
A searrch hass retuurrned moore 5,0000 ressults, or moorre thann 999 ffrraammeess wweerree sseelleecctteedd fforr delettion.  
Perform aa different search or select ffewer pictures.  
An attempt was made to delete or rotate to a protected picture. Remove protection and try  
TOO MANY FRAMES  
PROTECTED FRAME  
again (P68).  
aCAN NOT CROP  
apictures can nott be croopped.  
CAN NOT CROP  
The picture is damaged or was not createedd wwiitthh tthhee ccamera.  
An attempt was made to create a resized copy at a size equal to or larger than the original.  
Choose a smaller size.  
aCANNOT EXECUTE  
CAN NOT ROTATE  
An attempt was made to rotate a picture that can nnot be rotated.  
FCAN NOT ROTATE Movies can not be rotated.  
mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.  
FCANNOT EXECUTE Red-eye removal can not be applied to movies.  
90  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
NO CARD  
INSERT A NEEW CARD  
Noo mmeemmoorryy ccard inserted; innsseerrtt aa mmeemmoorryy ccard.  
NO CARD  
DPOF FILE ERROR  
CAN NOT SET DPOF  
The DPOF print order on the currrent meemmory caarrdd contaiins more tthan 9999 iimages.  
The picture caan not be pprintedd uusing DPOF.  
FCAN NOT SET DPOF Movies can not be printed using DPOF.  
A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other  
device. Confirm that the device is turned on and that the USB caable iss conneected.  
Printeer out oof papeer oorr iinnkk,, oorr ootthheerr pprriinntteerr eerrrroorr.. CChheecckk pprriinntteerr ((sseeee pprriinntteerr mmaannuuaall ffoorr ddeettaaiillss))..  
To resume printing, turn the printer off and then turn it back on.  
COMMUNICATION ERROR  
PRINTER ERROR  
PRINTER ERROR  
RESUME?  
Printer out of paper or ink, or ootthheerr pprriinntteerr eerrrroorr.. Check printer (see printer manual for details). If  
printing does not resume automatically, press MENU/OK to resume.  
An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa  
format not ssuuppppoorrtteedd bbyy tthhee pprriinntteerr.. MMoovviieess aanndd ssoommee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess ccan  
CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall  
to connfirm tthat tthhe priinnter supporrts thhee JJFFIIFF--JJPPEEGG oorr EExxiiff-JPEEG format. If it does not, thhe piccttures  
can not be pprinted.  
Troubleshooting  
91  
Appendix  
Tips and Tricks  
The following tips and tricks will help you get the most from your camera.  
Battery Performance  
Choose the following settings for improved battery performance:  
bFACE DETECTION (P32): OFF  
FAF MODE (P64): r CENTER  
ELCD MODE (P75): UPOWER SAVE ON  
Thhee SSeellff-timer  
To prevent blur caused by the camera moving when the shutter button is pressed,  
use the two-second timer.  
To turn the timer off, press DISP/BACK.  
92  
Tips and Tricks  
Intelligent Face Detection  
When ON is selected for bFACE DETECTION (P32), you can:  
Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-  
AGE DISP. (P73).  
Shooting  
Remove red-eye by selecting ON for BRED-EYE REMOVAL (P67).  
Zoom in on faces during slide shows (P67) or by pressing the selector  
down during playback.  
Playback  
Search for faces using bIMAGE SEARCH (P41).  
Crop the background from portraits using GCROP (P68).  
Print one copy for each person in the photo.  
Printing  
Appendix  
93  
Tips and Tricks  
Proo TTips  
• To photograph backlit subjects, select CNATURAL & Nfor  
shooting mode (P20) and position your subject in the cen-  
ter of the frame.  
• To photograph subjects that are in motion, select xTRACK-  
ING for FAF MODE (P64).  
• To photograph night scenes, raise sensitivity (  
P
60) and turn  
the flash on (P29).  
94  
Appendix  
Meemory Carrd Caappacityy  
The following table shows the recording time or number of pictures available  
at different image sizes. All figures are approximate; file size varies with the  
scene recorded, producing wide variations in the number of files that can be  
stored. The number of exposures or length remaining may not diminish at an  
even rate.  
Medium  
O
2 GB  
4 GB  
8 GB  
FINE  
270  
310  
360  
530  
700  
1150  
1680  
NORMAL  
540  
610  
FINE  
550  
620  
NORMAL  
1090  
1220  
1430  
2060  
2690  
4290  
6080  
FINE  
NORMAL  
2180  
2440  
2870  
4120  
5380  
8580  
12160  
T
O4:3  
O3:2  
O16:9  
P4:3  
P16:9  
Q4:3  
Q16:9  
h1280†  
f
1110  
1240  
1470  
2130  
2810  
4600  
6720  
710  
730  
1030  
1340  
2140  
3040  
1060  
1400  
2300  
3360  
9min.  
18min.  
55min.  
116min.  
37min.  
111min.  
233min.  
27min.  
58min.  
g
* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are  
available, the camera will show the time remaining for a movie 2GB in size.  
Use a G card or better when shooting HD movies.  
Appendix  
95  
Specificaattiioons  
System  
Model  
Effective pixels  
CCD  
Digital Camera FinePix T300/T200/T190 Series  
14 million  
/
1 2.3-in., square-pixel CCD with primary color filter  
Storage media  
File system  
SD/SDHC memory cards  
Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order  
Format (DPOF)  
File format  
Still pictures: Exif 2.3 JPEG (compressed) Movies: AVI-format Motion JPEG  
Image size (pixels)  
O4 : 3: 4,288 × 3,216  
P4 : 3: 3,072 × 2,304  
Q4 : 3: 2,048 × 1,536  
O3 : 2: 4,288 × 2,864  
O16 : 9: 4,288 × 2,416  
P16 : 9: 3,072 × 1,728  
Q16 : 9: 1,920 × 1,080  
Leens  
Fujinon 10 × opticall zoom llens,, F3.4 (wide angle) – F5.6 (telephoto)  
f=5.0 mm–50.0 mm (35-mm format equivalent: 28 mm–280 mm)  
Approx. 6.7 × (up tto 67 ×× wwhen coombinned wiitth optiical zoom)  
F3.4/F8.4 (wide angle), F5.6/F14.0 (telephoto); uses Neutral Density (ND) filter  
Apppprrooxx.. 4455 ccmm ((11..55 fft.)–infinittyy (wide angle); 2.0 m (6.6 ft.)–infinity (telephoto)  
Focal length  
Digital zoom  
Aperture  
Focus range  
(distance from front of lens) Maaccrro: approx. 5 ccmm22..55 mm//00..22 fftt..88..22 fftt.. (wide angle); 90 cm22..55 mm//33..00 fftt..88..22 fftt.. (telephoto)  
Sensitivity  
Sttaannddaarrdd oouuttput sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 32000 (imagge size Q);  
AUTO  
Metering  
256-segment through-the-lens (TTL) metering  
Exposurre control  
Programmed AE  
/
Exposure compensation –2 EV – +2 EV in increments of 13EV  
Picture stabilization  
Shutter speed  
(combined mechaniccal and Other modes: 8 s–1 2,000s  
Optical sstabilization, CCCCDD sshhiifft  
/
/
Auto mode: 1 4s–1 2,000s  
/
electronic shutter)  
Coonnttinuous  
Up to 1.2 fps; max. 3 frames  
96  
Appendix  
Specifications  
System  
Focus  
Mode: Singgle AF, ccontinuuous AF  
Autofoocus syystem: Contrast-detect TTL AF  
Focus--area selection: CENTER , TRACKING  
White balance  
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluores-  
cent, warm white fluorescent, cool whiittee fflluuoorreesscceenntt,, aanndd iinnccandescent  
Self-timer  
Flash  
Off, 10 sec., 2 sec.  
CCD-metered auto flash control; effective range when sensitivity is set to AUTOO is approx.  
50 cm–22..66 mm//11..66 fftt..88..55 fftt.. (wide angle), 90 cm11..77 mm//33..00 fftt..55..66 fftt.. (telephoto)  
Flash mode  
LCD monitor  
Auto, fill flash, off, slow syncc (red--eyee rremooval off)); auto with red-eye removal,, fill flash wwith red-  
eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)  
FinePix T300 series  
3.0-in., 230k-dot color LCD monitor; frame coverage approx. 96%  
FinePix T200/T190 series  
2.7-in., 230k-dot color LCD monitor; frame coverage approx. 96%  
Movies  
Frame size 1,280 × 720, 640 × 480, 320 × 240; 30 fpss; monaural sound  
Languages  
Arabic, Buulgarriian, Siimmpplliiffiieedd CChinesse, Trraaditiioonaall Chinesse, Czzeech, Daanishh, Duttcch, English, Farsi,  
Finnish, French, Geerman, Greeek, Hebrew, Hunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,  
Korean, LLatvian, Lithuanian, Noorrwweeggiiaann,, PPoolliisshh,, PPoorrttuugguueessee,, RRoommanian, Russian, Serbian,  
Slovak,, Sppaanniisshh,, SSwweeddiisshh,, TThhaaii,, TTuurrkkish, Ukkrainian, Vietnamese  
Input/output terminals  
A/V OUT (aaudio//videeoo oouuttppuutt)) NTSC or PAL output with monaural sound  
Digital input/output  
USB 2.0 High-Speeed; sharees A/V OUT cconnector; MTP/PTP  
Appendix  
97  
Specifications  
Power supply/other  
Power suppplly  
NP-45A rechargeable battery  
Battery life (approximate  
numberr of fraames thhaatt ccan  
be takeen withh a fullly-charged  
battery)  
Battery type  
NP-45A (type supplied with cammera)  
Approoximate number of frames  
180  
CIPA standdard, meeaasured inn B (auto) mode using battery supplied with caamera andd SD mem-  
ory card.  
Notte: NNumberr of shhoots thhaat caann bbee ttaakkeenn wwiitthh bbaatttteerryy vvaarriieess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll  
decline at low temperatures.  
Caammeerra dimmensions  
(W × H × D)  
97.0 mm × 56.5 mm × 28.1 mm/3.8 in. × 2.2 in. ×× 1.1 in.  
excluding projections (minimum depth 18.5 mm/0.7 in.)  
Caammera wweight  
FinePix T300 series  
Approx. 140 g/4.9 oz., excluding battery, accessories, and memory card  
FinePix T200/T190 series  
Approx. 134 g/4.7 oz., excluding battery, accessories, and memory card  
Shooting weight  
Operating conditions  
FinePix T300 series  
Approx. 157 g/5.5 oz., including battery and memory card  
FinePix T200/T190 series  
Approx. 151 g/5.3 oz., including battery and memory card  
Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F  
Humidityy: 10 % 8800 % (no condensation)  
98  
Appendix  
Specifications  
NP-45A rechargeable battery  
Noommiinnal voltage  
Noommiinnaall ccaappaacciitty  
DC 3.7V  
720 mAh  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.  
Weight  
Approx. 15.5 g/0.5 oz.  
BC-45C battery charger  
Rated input  
Input capacitty  
100V–240V AC,, 5500//6600 HHz  
100 V: 8.0VA  
240 V: 12VA  
Rated output  
4.2V DC, 550 mA  
Supported batteries  
Charging time  
NP-45A rechargeable batteries  
Approx. 110 minutes (+20 °C/+68 °F)  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 46.2 mm × 90.0 mm × 27.6 mm/1.8 in. × 3.5 in. × 1.0 in., excluding projections  
Weight Approx. 63 g/2.2 oz., excluding battery  
Weight and dimensions may vary with the country or region of sale.  
Appendix  
99  
Specifications  
Noottiices  
• Specifications subject to change without notice. FUJIFILM shall not be held liable for  
damages resulting from errors in this manual.  
• Although the LCD monitor is manufactured using advanced high-precision technol-  
ogy, small bright points and anomalous colors may appear, particularly in the vicinity  
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-  
tion; images recorded with the camera are unaffected.  
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,  
electric fields, static electricity, or line noise).  
• Due to the type of lens used, some distortion may occur at the periphery of images.  
This is normal.  
100  
Appendix  
Meemo  
101  
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN  
http://www.fujifilm.com/products/digital_cameras/index.html  
Restrictions on Camera Settings  
The options available in each shooting mode are listed below.  
Shooting Mode  
Option  
Q B P CD L Y K M  
r N O  
1 ✔  
H
P Q  
R
S U V  
✔ ✔ ✔1  
✔ ✔ ✔  
W
F
AUTO  
N
✔ ✔ ✔  
✔ ✔ ✔ ✔1  
BOFF  
O
P
✔ ✔  
✔ ✔ ✔ ✔1 ✔ ✔ ✔  
✔ ✔ ✔1  
✔ ✔ ✔  
✔ ✔ ✔  
✔ ✔ ✔ ✔1  
1 ✔ ✔1 ✔ ✔1  
1 ✔  
N
K
L
M
✔ ✔ ✔  
BON  
✔ ✔  
✔ ✔  
P
✔ ✔ ✔  
✔ ✔ ✔  
h
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
2 ✔ ✔ ✔ ✔  
2 ✔ ✔ ✔ ✔ ✔1 1 1 1 1 1 1 1 1 1 1 1 1  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 1  
F
H
F
d
1 1 ✔ ✔1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1  
AUTO  
3200  
1600  
800  
400  
200  
N
100  
O
P
Q
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
O
h1280  
f
g
Restrictions on Camera Settings  
Shooting Mode  
Q B P CD L Y K M N O  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
Option  
r
H
P Q  
R
S U V  
W F  
FINE  
T
P
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
NORMAL  
c
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
a
✔ ✔ ✔ ✔  
b
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
D
ON  
OFF  
ON  
OFF  
r
x
✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
R
b
F
✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔1  
✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔1 1 1 1  
✔ ✔  
✔ ✔  
✔ ✔ ✔ ✔  
1 1 1 ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔1 1  
1 1 1 1 1 1 1 1 1 1 1 1  
P
n
E
M
L
B
m
D
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 Automatically optimized for selected shooting mode.  
2 The camera automatically analyzes and selects macro mode ON/OFF.  
3 Aspect ratio fixed at 4 : 3.  

Bose SoundDock 10 User Manual
Bryan Boilers DTA 70 User Manual
Canon XL H1S User Manual
Clarion DXZ755MC User Manual
COBY electronic SNAPP CAM5000 User Manual
Farenheit Technologies EFM 01 User Manual
Jagermeister Beverage Dispenser JEM User Manual
JVC GET0634 001A User Manual
JVC GR DVX509SH User Manual
JVC GR SXM280A User Manual