User’s Guide
A
B
camera status
light
status display
panel
photo
capture light
camera control
buttons
battery cover
battery cover lock
tripod
socket
viewfinder
neck strap
holder
microphone
speaker
LCD screen
MENU
button
zoom
controls
bottom view
back view
IMPORTANT NOTICE
DISCLAIMER OF WARRANTY
A NOTE CONCERNING RESPONSIBLE USE OF
COPYRIGHTED MATERIALS
Epson America makes no representations or warranties, either express or
implied, by or with respect to anything in this manual, and shall not be liable for
any implied warranties of merchantability and fitness for a particular purpose or
for any indirect, special, or consequential damages. Some states do not allow the
exclusion of incidental or consequential damages, so this exclusion may not
apply to you.
Digital cameras and scanners, like photocopiers and conventional cameras, can
be misused by improper copying of copyrighted material. While some countries’
laws permit limited copying in certain circumstances, those circumstances may
not be as broad as some people assume. EPSON encourages each user to be
responsible and respectful of the copyright laws when using digital cameras and
scanners.
COPYRIGHT NOTICE
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of Epson America, Inc. No patent liability is assumed with respect to
the use of information contained herein. Nor is any liability assumed for damages
resulting from the use of the information contained herein. Further, this
publication and features described herein are subject to change without notice.
TRADEMARKS
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON
CORPORATION.
PhotoPC is a registered trademark and HyPict, PhotoEnhance, and Image
Authentication System are trademarks of Epson America, Inc.
Image Expert and Camio are trademarks of Sierra Imaging, Inc. in the United
States and other countries and are used under license.
CompactFlash is a trademark of SanDisk Corporation and has been licensed to
CFA (CompactFlash Association).
General notice: Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. EPSON disclaims any
and all rights in those marks.
Copyright © 2000 by Epson America, Inc.
Long Beach, California, USA
CPD-10471
4/00
Printed on recycled paper with at least 15% post-consumer content.
ii
Contents
Setting the Date and Time
1-10
1-11
1-12
1-13
1-14
Introduction
Formatting Your CompactFlash Memory Card
Removing a CompactFlash Memory Card
Installing a CompactFlash Memory Card
PhotoPC 3000Z Features
Software
Optional Accessories
Using Your Documentation
Safety Instructions
2
3
4
5
2
Taking Pictures
Using the Camera Dial
Reading the Status Display Panel
Checking the Battery
2-1
2-2
2-2
Section 1: Using Your Camera and
Taking Pictures
Checking the Picture Counter
Checking Other Status Information
Taking Pictures With the Viewfinder
Taking Pictures With the LCD Screen
Setting Image Quality
2-3
2-3
2-4
2-6
2-9
2-9
2-10
2-10
2-10
2-10
1
Setting Up Your Camera
Unpacking Your PhotoPC 3000Z
Using Rechargeable NiMH Batteries
Charging Batteries
Installing Batteries
Battery Options
Attaching the Neck Strap
Attaching the Lens Cap
Using the Camera Case
Choosing Your User Mode
1-1
1-2
1-2
1-4
1-5
1-6
1-7
1-8
1-9
Standard JPEG
Fine JPEG
Super Fine JPEG
HyPict JPEG
A
B
Uncompressed Tiff
iii
Using the Flash
Auto
2-11
2-12
2-12
2-12
2-12
2-12
2-13
2-14
2-15
2-17
2-18
5
Adjusting Exposure and Color Settings
Adjusting Exposure
5-1
5-2
5-3
5-4
5-5
5-6
5-8
5-9
5-10
5-10
5-11
5-12
Forced Flash
Flash Off
Red-eye Reduction
Changing the Automatic Exposure Value
Setting Shutter Speed and Aperture
Using Aperture Priority Settings
Adjusting the Sensitivity Setting
Adjusting the White Balance Setting
Setting the Custom White Balance
Fixing Condition Settings
Slow Synchronized Flash
Taking Pictures With the Timer
Selecting Color or Black and White Mode
Using Programmed Subject Settings
Adding Sound to Pictures
Enabling Fixed Settings
Capturing Shots With Fixed Settings
Exposure and Color Tips
Using Quick Playback and Delete
3
4
Capturing Video Clips and Special Shots
Recording Video Clips
Continuous Shooting
Continuous Shooting Using the Timer
Interval Shooting
3-1
3-2
3-4
3-5
6
Playing Back Photos
Playing Back Pictures One by One
Playing Back Multiple Pictures
Deleting Pictures
6-2
6-2
6-3
6-3
6-4
6-4
6-5
6-6
6-7
6-8
Deleting All Pictures
Deleting Selected Pictures
Framing, Focusing, and Zooming
Taking Digital Zoom Pictures
Taking Panoramic Pictures
Taking Close-Ups With Macro Mode
Adjusting the Focus
4-1
4-3
4-4
4-5
Locking and Unlocking Pictures
Adding Audio Recordings
Playing Back Audio Recordings
Deleting Audio Recordings
iv
Magnifying a Picture
Playing Back Video Clips
6-8
6-9
Section 2: Using Your Camera With
Your Computer or Video Device
Deleting a Video Clip
6-11
6-12
6-12
6-14
6-14
6-15
Viewing Picture Information
Playing Your Pictures as a Slide Show
Playing Sounds With Your Slide Show
Excluding Pictures From a Slide Show
Rotating Pictures in a Slide Show
9
Installing Software and Connecting
Installing Your Software
9-1
9-2
9-4
9-5
9-6
9-6
9-7
Installing for Windows
Installing on a Macintosh
7
8
Connecting to a Windows PC
Connecting to a Macintosh
Connecting the Camera with the USB Cable 9-8
Setting the Auto Power Off Time
Turning the Camera Alert Sounds On or Off
Adjusting the LCD Brightness
Setting the Camera Volume
Setting the Time and Date
Setting the Language
7-1
7-2
7-3
7-3
7-4
7-5
10 Getting Photos Into Your Computer
Transferring Photos, Sound Files, and Video Clips 10-1
Saving Files in Albums With Image Expert
Downloading Files Automatically With
Auto Downloader
Getting Images Into TWAIN-Compliant
Applications
10-2
Creating DPOF Files for Processing
10-6
Introduction to the DPOF Standard
Making the DPOF File
Confirming and Changing the DPOF File
Deleting the DPOF File
8-1
8-2
8-5
8-6
8-6
10-9
Getting Images That You Can Import
What To Do If the Camera Is Not
Responding
10-10
A
B
Reading Error Messages
10-13
v
Configuring Camera Events
10-14
10-15
Adjusting Camera Settings From Your Computer 13-5
Configuring Camera Events in Windows
Configuring Camera Events in Macintosh 10-16
Changing Settings With Image Expert
Changing Settings With EPSON Photo!3
13-5
13-7
11 Getting Your Photos Into Documents
14 Presenting Your Photos
Importing Images Into Documents
Getting Images With Copy and Paste
Using Drag and Drop From an Album
(Windows Only)
Getting Images With the Camio Viewer
(Windows)
11-2
11-4
Uploading Images to the Camera
Converting Files on a Windows PC
Converting Files on a Macintosh
14-1
14-2
14-4
14-6
14-7
14-7
14-9
14-10
14-12
11-6
Converting Presentations
Capturing Windows Screens
Dragging and Dropping a Picture Into
a Document
Transferring Images Before Placing Them
Capturing Macintosh Screens
Connecting the Camera to a Video Device
Setting the Broadcast Signal System
11-7
11-8
12 Printing Your Photos
Section 3: Troubleshooting and
Reference
Opening Photos in the Camera’s Memory Card 12-2
Printing Photos
12-3
12-4
A Maintenance and Troubleshooting
Caring for the Camera and Battery Charger
Handling the Camera
Cleaning the Camera and Battery Charger
Storing the Camera
Solving Camera Problems
A-1
A-1
A-2
A-2
A-3
A-8
13 Operating the Camera From Your Computer
Taking Pictures From Your Computer With Image
Expert
Using the Self Timer
Taking Pictures With EPSON Photo!3
13-1
13-3
13-4
Solving Connection and Software Problems
vi
Solving Picture Problems
Where To Get Help
EPSON Accessories
Software Support
A-13
A-17
A-18
A-18
A-18
NiMH Battery Charger
Physical Dimensions
Technical
C-5
C-5
C-5
C-5
C-5
C-5
C-5
C-6
C-6
C-6
C-6
C-6
C-7
NiMH Batteries
Software Licensing
Optional Universal AC Adapter
Physical Dimensions
Technical
CompactFlash Memory Card
Storage Capacity
Minimum System Requirements
Windows Systems
B Optional Accessories
Using the Optional AC Adapter
Using a Tripod
Attaching an Optional Converter Lens or Filter
Attaching an Optional Flash
Using a PCMCIA Adapter
Installing the PCMCIA Adapter
Transferring Photos With the Adapter
Image Authentication System
B-2
B-4
B-5
B-7
B-7
B-8
B-8
Macintosh Systems
D Regulatory Information and Warranty
Declaration of Conformity
FCC Compliance Statement
Warranty
D-2
D-3
D-4
C Specifications
Camera
C-1
C-1
C-1
C-2
C-3
C-3
C-3
Physical Dimensions
Power
Technical
Environmental
Safety
Photographic
Index
A
B
Photo Processing Time and File Size (approximate) C-4
vii
Introduction
our new EPSON PhotoPC 3000Z is an ultra-high
resolution, three megapixel, USB and serial digital
Y
camera with 3× optical zoom. It includes three different user
modes with varied levels of control: a manual mode for
expert photographers, a programmed mode for control of
your shots and time savings, and a fully automatic
point-and-shoot mode for no-fuss photography.
The PhotoPC 3000Z comes with a built-in microphone and
speaker that let you add and play back voice messages. You
can also capture full-motion video with sound. Your camera
puts you in control of all your shots with exposure, flash,
white balance, metering, and focus settings.
A
B
Introduction
1
The PhotoPC 3000Z captures 2048 × 1536-pixel resolution
images in 24-bit color, using a 3.34 megapixel CCD sensor.
With EPSON’s HyPict™ image enhancement technology,
the images can be interpolated to 2544 × 1904 pixels
(4.8 megapixels) right inside the camera. You can also
capture uncompressed Tiff images for excellent detail.
◗ Resolutions of 2048 × 1536 pixels, and up to
2544 × 1904 pixels (interpolated) using EPSON’s
HyPict image enhancement technology
◗ Produces A3-sized prints (12 × 17 inches) with HyPict
photos
◗ Uncompressed Tiff file format
Your PhotoPC 3000Z comes complete with cables, batteries,
battery charger, neck strap, soft case, lens cap, and 16MB
CompactFlash™ memory card. It also includes a CD-ROM
with software and utilities for downloading, uploading,
editing, organizing, and printing your pictures.
◗ 16MB EPSON CompactFlash card that holds
approximately 31 fine-resolution or 155 standard-
resolution images
◗ 25-second, QuickTime™ Movie (Motion JPEG) video
clip capture at 15 frames per second
◗ Built-in microphone and speaker that let you record and
play back an audio recording of up to 10 seconds for
each picture (25 seconds during video clip capture)
PhotoPC 3000Z Features
PhotoPC 3000Z includes the following features:
◗ 3.34 million pixel CCD sensor
◗ 3× optical zoom
◗ 1.8-inch, wide view, TTL LCD screen that shows 98%
of the final image and supports instant preview,
playback, and delete
◗ Bright lens (F2.0) for sharper images
◗ 24-bit color or monochrome image capture
◗ Quick and easy image transfer and print
Introduction
2
◗ Video and audio output for playing your pictures, video
clips, and sound recordings back on a TV, VCR, or
projector
Software
The PhotoPC 3000Z software suite includes the following
Windows and Macintosh applications:
◗ 2× digital zoom, panorama, interval, and continuous
◗ Sierra Imaging Image Expert™ software for transferring,
organizing, editing, and printing your pictures. Also
Reader
shooting
◗ Macro mode shots as close as 2.36 inches (6 cm)
◗ Adjustments for white balance, exposure, sensitivity,
aperture, shutter speed, and focus
◗ The EPSON Photo!3 application and TWAIN driver
for transferring your pictures
◗ Built-in flash with leading and trailing slow
synchronized modes for night photos and action photos
◗ EPSON File Converter for converting files (including
presentation slides) into a file format that you can
upload into your camera
◗ Four rechargeable NiMH AA batteries and a fast charger
◗ Automatic date and time recording for each picture
◗ EPSON Auto Downloader for instantly transferring
◗ Fully USB-compatible with serial and USB cables for
transferring photos (see Appendix C for system
requirements)
your photos to the computer
◗ EPSON Photo! Print2 for printing your pictures
A
B
Introduction
3
Optional Accessories
EPSON offers these accessories for the PhotoPC 3000Z:
Using Your Documentation
Your EPSON PhotoPC 3000Z documentation gives you all
the information you need to use your camera and software.
◗ Universal AC adapter (part number B867081) for use
with any standard (100 to 240 V) electrical outlet
◗ Your Quick Reference Guide is a handy, portable guide
◗ Additional or replacement NiMH rechargeable batteries
that explains basic settings and how to take pictures.
(part number B818113)
◗ You can find instructions for using Image Expert in your
electronic Image Expert 1.8 User’s Guide. (See Chapter 9
for details on reading your electronic manual.)
◗ Additional or replacement universal NiMH Power Pak,
which includes batteries and charger (part number
B818172)
◗ This User’s Guide includes most of the information
◗ EPSON Image Authentication System™ (IAS) software
you’ll need and is divided into the following sections:
(part number PPC3–IAS)
Using Your Camera Explains setting up your camera,
and Taking Pictures taking pictures and video clips, and
playing back pictures and video clips.
Your camera is also compatible with a range of options that
can enhance your shots and store more images. You can
attach an optional flash to the camera’s hot shoe for portrait
photos or photos in places that are dimly lit. The camera’s
lens adapter allows you to add optional lenses and filters for
specialized shots. You can also obtain additional
Using Your Camera Tells you how to connect your camera
With Your
Computer
or Video Device
to your computer, use your software,
download photos, upload photos,
present photos, and print photos.
Troubleshooting
and Reference
Gives you important reference
information: including troubleshooting,
safety, and maintenance information.
CompactFlash memory cards (Type I) and PCMCIA
adapters made by leading suppliers, such as Lexar Media™,
Delkin Devices,™ and SanDisk.
Index
There is an index at the end of the
book.
Introduction
4
◗ If the battery charger shows unusual signs such as noise,
Safety Instructions
odor, or smoke, unplug it immediately.
Read all of these instructions before using your camera and
battery charger. Also follow all warnings and instructions
marked on the camera, battery charger, and batteries.
◗ To avoid damage to the optics of the camera, do not
expose the lens to direct sunlight for extended periods of
time.
◗ To reduce the risk of electric shock, do not remove the
camera’s cover or open any of the compartments except
as instructed in this User’s Guide.
◗ Do not use the charger near water. Never insert or
remove the charger’s power plug with wet hands.
◗ Keep the charger away from heat sources. Do not use
◗ To prevent fire or electric shock, do not insert objects
through any openings in the camera or battery charger.
Do not expose the camera or battery charger to rain or
moisture.
outside the temperature range of 41 to 95°F (5 to 35°C).
◗ Do not use the charger within reach of children.
◗ Do not insert batteries backward.
◗ To prevent fire or explosion, do not use the camera or
battery charger where inflammable or volatile gas is
stored.
◗ Use only the types of power sources listed on the charger
label and in this User’s Guide. Always supply power to
the charger directly from a standard domestic electrical
outlet.
◗ If the camera shows unusual signs such as noise, odor, or
smoke, turn it off immediately. Remove the batteries
and/or disconnect the AC adapter, and unplug the AC
adapter from the electrical outlet.
◗ Do not charge the batteries using an electrical outlet on
A
B
an airplane.
◗ Do not use the camera outdoors during adverse weather
conditions.
Introduction
5
◗ Do not store the camera near sources of bright light,
direct sunlight, high humidity, heat, excessive dirt or
dust, or where it will be exposed to strong vibrations or
magnetic fields.
damaged; if the camera or its optional accessories do not
operate normally or exhibit a distinct change in
performance.
◗ Adjust only those controls that are covered by the
◗ To prevent possible eye injury, do not take flash pictures
operating instructions.
of faces at close range.
◗ Do not attempt to service the camera or battery charger
yourself. Refer all servicing to qualified service
personnel.
◗ Avoid sudden temperature changes, which can cause
moisture to condense on the camera. Keep the camera in
a case or bag if you need to move it from a cold
environment to a warm one. Allow time for the camera
and its optional accessories to adjust to temperature
changes before using them.
◗ If the liquid crystal solution contained in the display
panel or in the LCD screen leaks out and gets on your
hands, wash them thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water.
◗ Do not use a frayed or damaged power cord with the
◗ Do not swing the camera about with the neck strap.
This can cause damage to the camera or other objects, or
cause injury.
AC adapter.
◗ Remove batteries and/or unplug the camera and the AC
adapter and refer servicing to qualified service personnel
under the following conditions: if the power cord or
plug is damaged; if liquid has entered the camera; if the
camera has been dropped or its exterior has been
◗ Do not pull or tighten the camera’s neck strap too much
when wearing it; this can cause serious injury.
◗ Keep the camera and all its included parts away from
children.
Introduction
6
.
Using Your Camera and Taking Pictures
This section includes information about using your EPSON PhotoPC 3000Z to take and play back pictures, adjust
camera settings, and capture video clips. It also explains how to use the camera to set up DPOF files for printing. The
following chapters are included in this section:
1
2
3
4
5
6
7
8
Setting Up Your Camera
Taking Pictures
Capturing Video Clips and Special Shots
Framing, Focusing, and Zooming
Adjusting Exposure and Color Settings
Playing Back Photos
Adjusting Camera Settings
Creating DPOF Files for Processing
When you are ready to load your photos onto your computer and work with them; or if you want to use your camera
with your computer, TV, or other video device; or to print out your photos, see the next section, “Using Your Camera
With Your Computer or Video Device.”
.
1
Setting Up Your Camera
efore you can start using your PhotoPC 3000Z, you
Unpacking Your PhotoPC 3000Z
Make sure you have all the items shown below.
Bneed to charge the batteries. You must also format your
CompactFlash memory card and prepare the camera. This
chapter describes the following:
◗ Unpacking your PhotoPC 3000Z
◗ Using rechargeable NiMH batteries
◗ Attaching the neck strap
lens cap
lens
camera
software
adapter
lens cap strap
CompactFlash card
(16MB, installed in
camera)
◗ Attaching the lens cap
soft case
◗ Using the camera case
neck strap
rechargeable
batteries
◗ Choosing your user mode
◗ Setting the date and time
PC serial cable
Macintosh serial
cable
◗ Formatting your CompactFlash memory card
◗ Removing a CompactFlash memory card
◗ Installing a CompactFlash memory card
◗ Adjusting the viewfinder focus
A
B
battery
charger
AC power cord
(for charger)
USB cable
video cable
Setting Up Your Camera
1-1
Follow these steps to charge your batteries for the first time:
Using Rechargeable NiMH Batteries
Your PhotoPC 3000Z comes with a charger and four
rechargeable NiMH batteries that can be recharged hundreds
of times.
1
Insert all four batteries, positioning the + and – ends as
shown.
NOTE
New batteries need to be fully charged three times before you
use them. This process takes approximately five or six hours—
but you only need to do it once for the first charge. When you
need to recharge your batteries in the future, it will take
approximately two and a half hours for a full charge.
+
–
2
Connect the battery charger to its power cord, as shown
below.
Charging Batteries
It’s important to fully charge your batteries, so they will last
as long as possible before they need recharging.
WARNING
Make sure you use the charger only with EPSON rechargeable
NiMH batteries (model EU-24). Do not place any other batteries in
the charger. Always charge batteries from the same package as a
set. Do not mix old and new batteries. Read all safety instructions
in the Introduction before using the charger.
charger light
Setting Up Your Camera
1-2
3
Plug the charger into an electrical outlet. The charger
light turns red, indicating that the charger is working.
When the batteries are charged, after about two and a
half hours, the light goes off.
7
Before storing the charger, disconnect the power cord
and remove the batteries.
(For subsequent charges of your NiMH rechargeable
batteries, follow steps 1 through 3, then unplug the charger
and follow steps 6 and 7 above.)
NOTE
Replace the batteries with new EPSON NiMH batteries if the
charger light stays on for more than four hours or the charger
light flashes for more than half an hour.
Be sure to charge the batteries completely to make them last
as long as possible. They can be recharged hundreds of times,
so do not dispose of them until they are worn out.
4
5
Now charge your batteries again by unplugging the
battery power cord and then plugging it in again.
NOTE
To keep the charger terminals clean, unplug the charger and wipe
the terminals with a dry cloth. If you find that your batteries run
out faster after you recharge them a few times, make sure you
discharge them completely before recharging. If this doesn’t
help, replace the batteries.
Charge the batteries a third time. After the charger light
goes off, unplug the charger. To avoid overcharging,
don’t leave the charger plugged in for long periods of
time after the light goes off.
6
Wait one hour until the batteries cool before removing
them from the charger.
WARNING
Batteries are very hot (149 °F [65 °C]) after charging.
Setting Up Your Camera
1-3
3
Insert four batteries into the compartment, positioning
Installing Batteries
the + and − ends as shown below.
Before you install (or remove) batteries, make sure the
camera is turned off.
1
2
Hold the camera upside down.
Press and hold down the battery cover lock and slide the
cover out to open it.
4
Lower the battery cover and slide it in, as shown below.
battery cover
lock
When the battery power is almost out, a low battery icon
appears on the camera’s display panel. Be sure to remove
and recharge all four batteries at the same time.
Setting Up Your Camera
1-4
◗
◗
Replace all four batteries at the same time. Do not mix old
and new batteries.
Battery Options
If you forget to charge your rechargeable NiMH batteries or
if they need to be replaced, the PhotoPC 3000Z camera can
also accept the following:
Batteries that have not been used for a long time do not
charge well. However, with regular use, the batteries will
return to normal.
◗
◗
Batteries discharge at least 2% per day, whether they are
used or not.
◗ Single-use AA lithium batteries (longer life, Energizer
recommended)
If the batteries are charged in a hot environment, or if they
are charged repeatedly without being discharged, they will
wear out more quickly.
◗ Single-use AA alkaline batteries (short term use only,
Duracell Ultra recommended)
◗
◗
Do not drop, puncture, disassemble, or mutilate batteries.
Do not get them wet or expose them to fire.
WARNING
When the camera is not used for long periods of time,
remove the batteries and store them at a low temperature in
a dry location. Store away from the reach of children.
To avoid the danger of fire or explosion, do not mix different
types of batteries. Do not allow the battery contacts to touch
metal objects such as coins or keys, which could short out the
battery. Read all safety instructions before using batteries.
◗
◗
To avoid fire or electric shock, do not use batteries that are
leaking or damaged in any way.
If battery acid gets in your eyes or on your skin, immediately
rinse the area with water and seek medical treatment. If a
battery is swallowed, seek medical treatment immediately.
Note the following safety instructions when handling batteries:
◗
◗
Use only the EPSON battery charger (Model EU-38) to
charge the batteries that came with your camera.
◗
◗
Dispose of used batteries according to the manufacturer’s
instructions and in compliance with all applicable laws.
Contact your local government agency for information about
battery recycling and disposal.
Use the batteries that came with your camera only in EPSON
digital cameras.
◗
◗
Do not use manganese batteries.
Battery life varies depending on the battery type, the
manufacturer, and other factors.
Do not mix different types of batteries; this can cause fire or
explosion.
Setting Up Your Camera
1-5
2
Attach the fastener to the camera by passing it through
an eyelet on one side of the camera.
Attaching the Neck Strap
Your camera includes a neck strap that attaches to the camera
to make it easier to carry.
WARNING
To avoid damaging the camera or other objects, or injuring
people, do not swing the camera about. Keep the strap away
from children. Do not pull or tighten the strap too firmly while
wearing it around your hand or neck; this can cause serious injury.
To attach the neck strap, follow these steps:
3
Tighten the screw sleeve on the fastener as shown below
to close it.
1
Unscrew the screw sleeve on a triangular fastener at one
end of the strap.
Setting Up Your Camera
1-6
4
After securing the fastener, turn it so that the screw
sleeve is covered by the strap, as shown below.
Attaching the Lens Cap
Follow these steps to secure the lens cap to the camera:
1
2
Pass the end of the string with the shorter loop through
the eyelet on the edge of the lens cap.
Then, pass the end of the string with the longer loop
through the shorter loop.
3
Pull the end of the string with the longer loop tight.
5
Repeat steps 1 through 4 to attach the other end of the
strap to the other side of the camera.
Setting Up Your Camera
1-7
4
Pass the end of the string with the longer loop through
6
Push the lens cap onto the camera. It should snap into
place.
the neck strap’s triangular fastener.
To remove the lens cap, press in the lens cap release tabs
(on the sides of the cap) as you pull the cap off of the
camera.
Using the Camera Case
Place the camera in the case upright, with the front of the
camera facing the front of the camera case. Secure the top of
the case with the velcro flap. Place the camera case strap over
the neck stap and close the snap to secure the case to the neck
strap.
5
Gently pull the lens cap through the string’s longer loop
until the string is securely attached to the camera.
neck
strap
camera case
strap
Setting Up Your Camera
1-8
Full Auto In this mode, the camera chooses most settings
for you. You can simply point and shoot, or you can adjust
some basic settings (for example: image quality, digital zoom,
macro mode and panoramic mode).
Choosing Your User Mode
The PhotoPC 3000Z has three user modes to give you
different levels of control over the camera settings. To use
more advanced features, such as white balance and exposure
adjustment, you must be in Program mode or Manual mode.
Follow these steps to choose the camera mode:
Program This setting is recommended for photographers
who want a moderate amount of control over the camera’s
functions. This is the camera’s default mode. Programmed
subjects (Normal, Sports, Portrait, and Landscape) tailor
your camera settings to the type of picture you’re taking. You
can also make adjustments to sensitivity, white balance, and
exposure.
1
Turn the dial to
and press the POWER button to
turn on the camera. You see the SETUP menu:
user mode
Manual This mode is for experienced photographers who
want complete control over the camera’s wide array of
settings and features. In addition to changing sensitivity and
white balance, you can adjust the shutter speed and aperture,
choose a spot or matrix metering system, and focus the
camera to three feet, ten feet, or infinity.
2
Press the button next to the current user mode to cycle
through the three user modes.
NOTE
Your user mode stays in effect until you change the setting. If
your camera is without battery power for over one hour, the user
mode will go back to the Program mode setting.
Setting Up Your Camera
1-9
Follow these steps to set the date and time:
Setting the Date and Time
Before you use the camera, you need to set its clock. Then
the camera will automatically record the date and time for
each picture you take. If you remove the batteries for more
than one hour (without connecting the camera to an
optional AC adapter), you will need to reset the clock.
1
Turn the camera dial to
to turn on the camera.
. Press the POWER button
2
You see the clock setting screen with the month
highlighted in red.
NOTE
You can also set the camera’s clock through your computer. See
Chapter 9 for instructions on connecting the camera to your
computer, and Chapter 13 for instructions on setting the date and
time.
3
4
Press the button next to the up or down arrows to
increase or decrease the number, until the month is
correct.
camera dial
Press the button below the right arrow to select the day,
year, and time (military time format). Make adjustments
as described in the previous step.
Setting Up Your Camera
1-10
5
When you’re finished, press the button under BACK.
Follow these steps to format your memory card:
You see the SETUP menu.
1
Turn the camera dial to
menu.
. You see the SETUP
2
Press the button below Memory SETUP.
The Memory Card Format menu appears if a memory
card is correctly installed in the camera.
Now you’re ready to format the memory card.
Formatting Your CompactFlash
Memory Card
You must format CompactFlash memory cards before you
use them to store your images. Your camera comes with a
16MB memory card preinstalled in the camera. This card
stores your photos, video clips, and audio recordings until
you transfer them to your computer and delete them.
3
Press the button next to MEMORY CARD FORMAT
to format the card. You see a message warning you that
all data on the card will be deleted.
4
5
Press the button next to Yes to format the card, or the
CAUTION
button next to No to cancel.
When you format your memory card, all the data is lost, including
any photos stored on your card.
Press the button under BACK to return to the SETUP
menu.
Setting Up Your Camera
1-11
3
Push in the eject button to release the card. Then pull
out the card and close the cover.
Removing a CompactFlash Memory
Card
CAUTION
Never remove a card while the camera is on. Data in the card may
be lost or damaged.
Follow these steps to remove a CompactFlash memory card
from the camera:
1
Make sure the camera is turned off. (Press the POWER
button to turn off the camera, if it is on.)
eject button
2
Place your finger behind the memory card cover latch
and pull the cover open.
memory card
cover latch
Setting Up Your Camera
1-12
3
Insert the card all the way into the memory card slot.
Make sure the front of the card is facing the same
direction as the front of the camera, and the arrow on
the card’s label is pointing in.
Installing a CompactFlash Memory
Card
(Type I, 4MB to 192MB) from leading suppliers like Lexar
Media, Delkin Devices, and SanDisk. See page B-2 for more
information.
Follow these steps to install a memory card:
1
Make sure the camera is turned off. (Press the POWER
button to turn off the camera, if it is on.)
2
Place your finger behind the memory card cover latch
and pull the cover open.
4
As you insert the card, the eject button pops up. Close
the memory card cover.
memory card
cover latch
Setting Up Your Camera
1-13
Adjusting the Viewfinder Focus
You can adjust the viewfinder’s focus using the diopter. This
is useful if you wear glasses and want to remove them to take
pictures with the viewfinder.
To adjust the focus, simply look through the viewfinder and
move the diopter dial up or down until you have a clear view.
diopter
dial
Setting Up Your Camera
1-14
Taking Pictures
2
aking pictures with the PhotoPC 3000Z is similar to
Tusing a traditional camera. This chapter gives the
following information for taking pictures:
◗ Enabling the confirmation screen
◗ Adding sound to pictures
◗ Using quick playback and delete
◗ Using the camera dial
Using the Camera Dial
◗ Reading the status display panel
◗ Taking pictures with the viewfinder
◗ Taking pictures with the LCD screen
◗ Setting image quality
The camera dial has six settings:
three for taking pictures, and
three for performing other
functions, such as setting up your
photos or playing them back on
the LCD screen.
◗ Using the flash
POWER button
◗ Taking pictures with the timer
◗ Selecting color or black and white mode
◗ Using programmed subject settings
To turn on the camera, remove the lens cap, then press the
POWER button in the center of the dial. (Press it again to
turn the camera off.)
A
B
Taking Pictures
2-1
Camera dial settings include the following:
Reading the Status Display Panel
,
, or , the status
Use this setting for video clip capture, continuous
details.
display panel (on the top of the camera) shows the camera’s
current settings and how many additional pictures you can
take.
Use this setting to take photos with the LCD screen.
See page 2-6 for details.
image quality
sensitivity
Use this setting to take photos with the optical
viewfinder. See page 2-4 for details.
flash
white
balance
video clips, and add audio recordings to your
photos. See Chapter 6 for details.
low battery
icon
monochrome
indicator
timer
exposure
pictures
remaining
Use this setting whenever you are connecting your
camera to the computer. Also use it to create DPOF
files with the PrintMark program. See Chapter 8.
Checking the Battery
When your battery power is almost out, the low battery
icon appears on the display panel; it flashes when your
battery power is too low to use the camera. You need to
recharge or replace the batteries or use the optional universal
AC adapter when you see this icon.
Use this setting to set up or view information about
your camera on the Setup screen. See Chapter 1 and
Chapter 7 for information.
Taking Pictures
2-2
Although you may be able to use the camera with low
batteries, it needs full battery power to operate reliably.
button. Before you can take any more pictures, you need to
delete some of the images on the memory card. (See page 6-3
for instructions.)
NOTE
If you want to save your photos before you delete them,
connect the camera to your computer (as described in
Chapter 9), then transfer the pictures (as described in
Chapter 10).
Several factors can affect battery life, including the surrounding
temperature and the type of batteries you use. Low
temperatures—especially below 50 °F (10 °C)—drain batteries
faster. See page 1-2 for battery use instructions.
Checking Other Status Information
Instead of the number of pictures remaining, you may see
one of the following in the lower right corner of the status
display panel:
Checking the Picture Counter
The large number in the lower right of the status display
This number is affected by the image quality setting. Also,
if you have any audio and/or video recordings stored on your
memory card, the number on the display panel may be
greater than the actual number of remaining pictures.
◗ In Program mode or Manual mode, the
exposure value appears on the left and the
shutter speed appears on the right when
you hold the shutter button down halfway.
See page 1-9 for more information about
user modes.
When the memory card is full, the number on the display
panel reads 0, the camera status light on the back of the
camera flashes red, and you can no longer use the shutter
◗ When you turn the camera’s dial to
SEt is displayed. No other information
appears in the status display panel.
,
Taking Pictures
2-3
◗ While you make an audio recording, rEc
2
Press the POWER button to turn on the camera and
turn the camera dial to . Wait until the photo capture
appears in this space.
◗ While you take photos using the interval
shooting feature, Int appears on the
display panel.
viewfinder
control buttons
shutter
button
Taking Pictures With the Viewfinder
You can capture an image as you would with any
point-and-shoot auto-focus camera: look through the optical
viewfinder and press the two-step shutter.
photo capture
light
telephoto
button
wide angle
button
menu button
NOTE
You need to use the LCD screen when you make audio
recordings or use the panorama, macro, and digital zoom
features.
3
Use the camera’s control buttons to make any changes
you want to image quality, the flash, or other basic
settings. (Instructions for changing basic settings start
on page 2-9.)
Remove the lens cap, then follow these steps:
1
Make sure you are at least 20 inches (50 cm) away from
your subject. (If you want to get closer, use macro mode
with the LCD screen, as described on page 4-4.)
Taking Pictures
2-4
While holding down the shutter button, you can
reframe your picture and move your subject off-center
if you want.
NOTE
To change the programmed subject setting (when the user
mode is set to Program), or to make changes to exposure,
white balance, or other advanced settings, press the MENU
button to see the Viewfinder menu. See the specific
setting’s section for more details.
7
8
Press the shutter button the rest of the way down to take
the picture.
4
5
6
Look straight through the viewfinder and center your
subject within the cross hairs.
Hold the camera still until the shutter snaps, then release
the shutter button.
Push the T (telephoto) button to zoom in on your
subject, or the W (wide angle) button to zoom out.
NOTE
If there is a delay after you press the shutter button, make sure
you hold the camera still until it the shutter snaps, to avoid
blurring your images.
Hold the shutter button halfway down to lock the
camera’s settings. The photo capture light flashes until
the lens locks in focus and the camera determines the
exposure.
After you take a picture, the green photo capture light
flashes. This indicates that the image was captured and the
camera is processing it. When the light stops flashing, the
image is saved.
Taking Pictures
2-5
Remove the lens cap, then follow these steps:
CAUTION
If you set the camera down while the light is still flashing, make
sure you handle it carefully. The camera may lose your image if
you set it down too hard.
1
Make sure you are at least 20 inches (50 cm) away from
your subject. (If you want to get closer, use macro mode
as described on page 4-4.)
2
Turn the camera dial to to see the View menu. Wait
until the camera photo capture light stops flashing and
remains a steady green.
Saved images remain on the memory card even when you
turn off the camera or remove the memory card or batteries.
control buttons
Taking Pictures With the LCD Screen
The LCD screen lets you see a live preview of what the
camera’s lens sees at any moment. Although you can use this
setting anytime, you always choose it when you want to use
the macro, panorama, or digital zoom features, or when you
want to make audio recordings to go with your photos.
shutter
button
photo capture
light
telephoto
button
microphone
wide angle
button
NOTE
LCD screen
Before you begin to take pictures, you can use the SETUP menu
to turn on audio recording with the Confirmation setting. See
page 2-17 for details.
You see a preview of your picture on the LCD screen,
with the image quality and flash settings in the top left
corner of the screen.
Taking Pictures
2-6
The following screen illustrates what you see if your
camera is set to Program user mode, the default setting.
The settings look different if you’re using Full Auto or
Manual user mode. (See page 1-9 to change your
setting.)
For details, see Chapter 3 for special shots (including
video clips), see Chapter 4 for framing, focusing, and
zooming shots, or see Chapter 5 for color and exposure
settings.
NOTE
You can also use the camera’s buttons to change the image
quality, flash setting, or timer. (See the following sections in
this chapter for details on these settings.)
4
5
Push the T (telephoto) button to zoom in on your
subject, or the W (wide angle) button to zoom out. You
see a display with green zoom steps and the current
zoom position in yellow.
NOTE
If you’re using batteries, the camera shuts off automatically
after a designated period of inactivity. (The default is 30
seconds. See page 7-1 for instructions on setting the power
off interval.) When it is connected to the AC adapter, the
camera shuts off automatically after 15 minutes. If the image
on your LCD screen disappears, press the shutter button to
“wake” the camera.
Center your subject on the screen, then press the shutter
button halfway down to lock the auto focus and
exposure.
3
Using the preview image to guide you, make changes to
the settings on the View menu, if you like.
Taking Pictures
2-7
The photo capture light stops flashing and you see a
green circle on the screen when the lens locks in
If the Confirmation setting is on, you see a confirmation
screen.
focus and the camera locks its exposure settings. While
holding the shutter button down, you can reframe your
picture if you want.
6
7
Press the shutter button the rest of the way down to take
the picture.
NOTE
You enable the confirmation screen in the Shot SETUP
menu. See page 2-16 for detailed instructions on using the
confirmation screen.
Hold the camera still until the shutter snaps. Then
release the shutter button.
NOTE
If there is a delay after you press the shutter button, make
sure you hold the camera still until the shutter snaps, to
avoid blurring your images.
From the confirmation screen, you can do the following:
◗ Press the button next to Delete if you don’t want
the picture.
◗ Press the button next to Rec Sound to record a
message. You see a countdown on the screen.
During this time, you can record a message into the
camera’s microphone.
Taking Pictures
2-8
◗ Press the button next to to instantly play back
your images. (Press the button under BACK to
return to the View menu.)
image
quality
button
When the camera’s green photo capture light stops flashing,
you’re ready to take another picture.
Setting Image Quality
The PhotoPC 3000Z has four image quality (resolution)
settings. Press the image quality button on top of the camera
to cycle from one setting to the other.
The image quality icons appear on the status display panel as
described below.
NOTE
Standard JPEG
The camera dial must be turned to
quality.
,
, or
to set the image
Produces color or black and white images at 640 × 480
pixels. The CompactFlash memory card holds approximately
155 standard image quality pictures without audio
recordings, but the images include less detail when enlarged.
This setting is good for pictures that are viewed on screen or
on the Internet.
Taking Pictures
2-9
Fine JPEG
Uncompressed Tiff
Produces color or black and white images at
Produces color and black and white images at
2048 × 1536 pixels with moderate compression. Your
pictures include ample detail, and the CompactFlash
memory card holds approximately 31 pictures without audio
recordings. This setting is best for 8 × 10-inch prints.
2048 × 1536 pixels with no compression. Your pictures
include perfect detail without the distortion that
compression may cause. You can use this mode only when
you have at least 9.1MB free on your CompactFlash memory
card. Your included memory card can hold 1 Uncompressed
Tiff picture or 3 Tiff panorama pictures.
Super Fine JPEG
Produces color or black and white images at
2048 × 1536 pixels with low compression. Your pictures
include greater detail, and the CompactFlash memory card
holds approximately 15 pictures. With less compression, this
setting is better for images you are enlarging up to
11 × 14-inches.
You can enable (or disable) Uncompressed Tiff mode in the
Shot SETUP menu. Follow these steps:
1
Turn the camera dial to
and press the POWER
button to turn on the camera. You see the SETUP
menu.
2
Press the button next to Shot SETUP to go to the Shot
HyPict JPEG
SETUP menu.
Produces color or black and white images at
2544 × 1904 pixels (interpolated) with moderate
compression. Your pictures include excellent detail, and the
CompactFlash memory card holds approximately 12 HyPict
pictures. This setting is best for images you are enlarging up
to 12 × 17-inches.
Taking Pictures
2-10
3
4
Press the button under
Image JPEG to change the
Using the Flash
setting to Image Tiff. (Press the same button to
change the setting back.) You see a message warning you
to use a card with at least 9.1MB of free space.
flash
button
Press the button under BACK to return to the SETUP
menu.
Your camera has a hot shoe to attach an optional external
flash. See Appendix B for more information on purchasing
and attaching an external flash.
NOTE
◗
To capture Tiff photos, make sure the image quality is set
to
.
◗
You will notice a delay of approximately 32 seconds while
the camera processes your image in Tiff mode. You will also
notice a delay when playing back Tiff photos.
NOTE
The camera dial must be turned to
,
, or
to change the
flash setting. You can’t use the flash in continuous shooting or
◗
If you want to take multiple shots in Uncompressed Tiff
mode, you can buy a higher-density CompactFlash memory
card, which lets you store more photos. See Appendix B for
details. (You can still store several JPEG images with a
picture in Tiff mode.)
video clip capture mode.
After you take a picture with the flash, the flash icon blinks
until it is fully recharged. Your flash setting remains in effect
even after you turn off the camera.
Taking Pictures
2-11
Flash Off
TIPS
The flash is disabled, even when lighting is inadequate.
◗
When you’re using the Flash Off
setting, hold the camera
Use this setting for special effects, where flash
photography is prohibited, or for macro mode
close-ups.
steady or use a tripod to avoid capturing blurry images.
◗
If you are taking pictures outdoors in bright light, the camera
may reduce the exposure and darken your subject. To
brighten your subject without over-exposing the whole
picture, you can use the Forced Flash setting.
Red-eye Reduction
Use this setting to eliminate the red-eye effect (the
reddish reflection of the flash in your subjects’ pupils)
that flash photography often produces.
An icon for each setting appears on the status display panel,
as shown below:
Auto
Slow Synchronized Flash
The flash goes off automatically whenever it’s needed
Slow synchronized flash causes the aperture to stay
open longer, allowing more light to enter the camera.
for adequate lighting (default setting).
The camera has two slow synchronized flash settings. The
leading setting sets off the flash first, then exposes the subject
and takes the picture. Hold the camera still or use a tripod
when you are using the leading setting (see Appendix B).
The trailing setting flashes at the end of the exposure,
allowing you to capture background motion while freezing
your subject.
Forced Flash
The flash goes off with every picture you take. Use this
setting to compensate for backlighting (when you are
facing a light source).
Taking Pictures
2-12
Selecting a Slow Synchronized Flash Setting
Taking Pictures With the Timer
Follow these steps to select the setting you want:
Setting the timer creates a 10-second delay between
the time you press the shutter button and the actual
image capture. This allows you to take a picture of
yourself.
1
2
Turn the camera dial to
menu.
. You see the SETUP
Press the button next to Shot SETUP. You see the Shot
SETUP menu:
NOTE
You can also combine continuous, interval shooting, or video clip
capture with the timer for delayed automatic capture of images.
This allows you to photograph yourself in motion. See Chapter 3
for more information.
Follow these steps to take a single picture with the timer:
3
4
Press the button next to
Leading or
Trailing.
1
page B-4 for information on attaching the camera to a
tripod.)
Press the button under BACK to return to the SETUP
menu.
2
Turn the camera’s dial to
or . Then wait until the
NOTE
photo capture light stops flashing and remains a steady
green.
Slow synchronized flash is available only in the Program or
Manual user modes. If you are using your camera in Manual
mode, make sure you don’t set the flash mode to Ext Flash. See
page 1-9 for information about changing the user mode.
Taking Pictures
2-13
3
Press the timer button on the top of the camera. The
timer icon appears in the status display panel.
Selecting Color or Black and White
Mode
You use the SETUP menu to switch between color and black
and white pictures.
NOTE
timer button
There is no difference between the file sizes of color and black
and white pictures.
4
Press the shutter button all the way down. The timer
icon and the red timer light on the front of the camera
flash slowly for eight seconds. Then they flash rapidly for
two seconds before the shutter is released.
Follow these steps:
1
Turn the camera dial to
menu.
. You see the SETUP
The camera clicks when the image is captured. The
photo capture light on the back of the camera flashes
green as the PhotoPC 3000Z processes the image(s).
color/
monochrome
setting
NOTE
To cancel a timer picture after you’ve pressed the shutter
button, press the shutter button again, or press the
timer button.
2
Press the button next to Monochrome or Color to
change to your desired setting.
Taking Pictures
2-14
Landscape
Using Programmed Subject Settings
Recommended for landscapes or scenery.
Uses the following settings: matrix
metering and aperture set to F8.0. (The
aperture automatically changes to F2.0
when the subject is in dim light.)
The Program user mode (your camera’s default mode)
provides four programmed settings that let you choose the
type of shot you’re taking. The camera automatically assigns
the optimum exposure, metering method, and sensitivity for
your subject.
Follow these steps to use programmed subject settings:
Normal
1
2
3
Remove the lens cap and press the POWER button to
Appropriate for most photographs. Uses
the following settings: auto exposure and
matrix metering.
turn on the camera.
Set the camera to Program user mode (the default
mode). See page 1-9 for instructions.
Sports
Recommended for action photographs.
Uses the following settings: high shutter
speed, automatic sensitivity, and matrix
metering.
To take a picture with the LCD screen, turn the camera
dial to . You see the View menu.
Portrait
Recommended for portraits. Uses the
following settings: spot metering and
aperture fixed at F2.0.
Taking Pictures
2-15
To take a picture with the viewfinder, turn the camera
dial to . Then press the MENU button. You see the
Viewfinder menu.
Follow these steps to turn the confirmation screen on or off:
1
2
Turn the camera dial to
menu.
to display the SETUP
Press the button next to Shot SETUP. You see the Shot
SETUP menu with the current confirmation setting.
confirmation
setting
4
5
Press the button under the Program setting to cycle
through the four subject settings.
Take your picture. (See page 2-4 or 2-6 for instructions.)
3
Press the button next to Confirmation to change the
setting to Off or On.
Enabling the Confirmation Screen
The confirmation screen needs to be on if you want to add
recordings when you are taking photos. The confirmation
screen shows you a quick view of your picture right after you
take it. Then you can add a recording, delete the image, or
play back your photos instantly.
Taking Pictures
2-16
Adding Sound to Pictures
NOTE
When taking photos, you can only record audio if the LCD screen
is turned on and the Confirmation setting is enabled, as described
here. Audio recordings take up memory on your CompactFlash
memory card and reduce the number of photos you can store.
Your camera has a built-in microphone that lets you add an
audio recording of up to 10 seconds to each photo. You can
record audio in any user mode. You can make a recording
immediately after shooting a photo, or add it later. (For
information about adding a recording when playing back
photos later, see page 6-6. For instructions on playing back
recordings with your camera, see page 6-7.)
Follow these steps to add a recording right after taking a
picture:
1
2
Make sure the confirmation screen is enabled, as
described on page 2-16.
Turn the camera dial to
LCD screen.
.
Center the subject on the
microphone
3
4
Press the shutter button halfway down to lock the auto
focus.
When the photo capture light stops flashing and you see
a green circle
on the screen, reframe your image if
you want, then press the shutter button the rest of the
way down.
Taking Pictures
2-17
5
Hold the camera still until the shutter snaps. Then
release the shutter button. After a moment, you see the
confirmation screen.
Using Quick Playback and Delete
You can instantly play back the photo you just took, along
with all your other photos. You can also delete the image if
you don’t want to save it. (See Chapter 6 for additional
playback options that you can use in the camera’s Playback
menu.)
Follow these steps:
1
2
Make sure the confirmation screen is enabled, as
described on page 2-16.
6
7
Press the button next to Rec Sound. You see the
message Sound recording... and a countdown of the
recording time.
Turn the camera dial to
LCD screen.
.
Center the subject on the
Speak clearly into the microphone to record your
message.
3
4
Press the shutter button halfway down to lock the auto
focus.
You can record a message for up to ten seconds. To stop
When the photo capture light stops flashing and you see
recording at any time, press the button under Stop.
a green circle
on the screen, reframe your image if
you want, then press the shutter button the rest of the
way down.
Taking Pictures
2-18
5
Hold the camera still until the shutter snaps. Then
release the shutter button. After a moment, you see the
confirmation screen.
You can do any of the following from the quick
playback menu:
◗ Press the button under Multi to view multiple
images at once. (See page 6-2 for details.)
◗ Press the button next to Sound Play to play back
any recordings you made for your images.
◗ Press the button under Delete to delete an image
from your memory card. (To delete a recording, see
page 6-8.)
6
To delete the image, press the button next to Delete.
Your image is deleted and the camera returns to the
View menu.
◗ Press the button next to the magnifying glass to
enlarge an image. (See page 6-8 for details.)
To play back an image, press the button next to the
playback icon. You see the quick playback screen.
Press the button under BACK to return to the View
menu.
Taking Pictures
2-19
3 Capturing Video Clips and Special Shots
our PhotoPC 3000Z lets you take shots of moving
Recording Video Clips
Yand changing subjects, including video clips and time
You can capture 25-second video clips at 15 frames per
lapse photos. You can also take quick sequences of shots,
second with your camera. The images are saved at 320 × 240
without having to wait for the camera to process each image.
pixels in the Motion JPEG format. (They play back on your
This chapter explains how to use these features in the
computer in the QuickTime Movie format.)
following sections:
NOTE
◗ Recording video clips
◗
Hold the camera upright when capturing video clips. If you
hold the camera sideways, your video will play back
sideways. You can’t rotate video clips without a separate
video editing program.
◗ Continous shooting
◗ Interval shooting
◗
If you want to adjust any camera settings, such as white
balance, sensitivity, or macro mode, turn the camera dial to
to see the View menu and adjust the settings, then turn
the camera dial back to . See Chapters 4 and 5 for more
information.
A
B
Capturing Video Clips and Special Shots
3-1
Follow these steps to record a video clip:
Make sure it is zoomed to the position you want; you
can’t change the zoom setting once you’ve started
recording.
1
Turn the camera dial to
and press the POWER
button to turn on the camera.
4
Press the shutter button to begin recording your video
clip. If you want to stop the recording, press the shutter
button again.
You see a screen like the following:
You see the red letters REC on the screen while your
camera is recording. When the recording is done, the
camera displays Please wait... and takes a minute to
store the video.
To play back your video clip, see page 6-9.
2
3
To turn the sound on or off, press the button next to the
Sound setting.
Continuous Shooting
Push the T (telephoto) button to zoom in on your
subject or the W (wide angle) button to zoom out. You
see a display with green zoom steps and the current
zoom position in yellow.
In this mode, you can capture a complex motion in a series
of steps. You can capture the following numbers of
continuous shots per sequence: thirty-seven standard images
(two per second), seven fine images (one per second), or up
to three super fine images (one per second).
Capturing Video Clips and Special Shots
3-2
You can’t use the flash for continuous shooting, so make sure
you have adequate lighting for your pictures. Also, you can’t
select the HyPict or Tiff image quality settings.
NOTE
If you want to adjust any camera settings, such as white balance,
sensitivity, or macro mode, turn the camera dial to
to see the
View menu and adjust the settings, then turn the camera dial
back to . See Chapters 4 and 5 for details.
4
5
Center your subject in the red frame.
Press and hold the shutter button all the way down.
Follow these steps to take a sequence of pictures:
If the camera’s shutter sound is enabled, the camera
clicks as it captures each picture. (See page 7-2 to enable
camera sounds.)
1
2
3
Make sure you are at least 20 inches (50 cm) away from
your subject.
6
When the camera has captured a sequence of pictures,
the green photo capture light turns off. Release the
shutter button.
Turn the camera dial to . Wait until the photo
capture light stops flashing and remains a steady green.
Press the button under Mode Change to change to
NOTE
Continuous Shooting mode.
If you continue to hold down the shutter button after the first
sequence of pictures, the camera will pause to process the
images and then take a second sequence. The camera will
continue to take pictures until the memory card is full.
You see a preview of your picture on the LCD screen
with a red frame around it. CONTINUOUS appears on
the screen.
Capturing Video Clips and Special Shots
3-3
Continuous Shooting Using the Timer
You can also combine continuous shooting with the timer to
delay automatic capture of a series of images. This allows you
to photograph yourself in motion.
NOTE
You can capture 37 standard (2 per second), 7 fine (1 per second),
or up to 3 super fine (1 per second) images.
3
4
Center your subject in the red frame.
Press the timer button. The timer icon appears on the
status display panel to indicate that the timer is enabled.
1
2
Secure the camera on a flat surface or on a tripod. (See
page B-4 for information on attaching the camera to a
tripod.)
5
Press the shutter button.
You have 10 seconds to get ready for “action” in front of
the camera. The timer icon and the red timer light on
the front of the camera flash slowly for eight seconds.
Then they flash rapidly for two seconds before the
shutter is released.
Turn the camera dial to . (Press the POWER button
to turn on the camera.) Wait until the photo capture
light stops flashing and remains a steady green.
You see a preview of your picture on the LCD screen,
with a red frame around it. CONTINUOUS appears on
the screen.
If the camera’s shutter sound is enabled, the camera
clicks as it captures each picture. (See page 7-2 to enable
camera sounds.)
Capturing Video Clips and Special Shots
3-4
Follow these steps to use the time lapse feature:
Interval Shooting
You can use this time lapse feature to capture scenes that
change over time, such as a sunset or a busy street corner.
Your camera lets you set a time interval from 10 seconds to
24 hours. Interval shooting is available for all user modes.
1
2
3
Secure the camera on a flat surface or on a tripod. (See
tripod.)
Turn the camera dial to . Press the POWER button
to turn on the camera and wait until the photo capture
light stops flashing and remains a steady green.
Press the button under Mode Change twice. You see
the following screen:
NOTE
◗
When you’re adding audio recordings or taking pictures with
HyPict image quality, the shortest time interval available is
20 seconds.
time lapse
interval setting
◗
If you want to adjust any camera settings, such as white
balance, sensitivity, or macro mode, turn the camera dial to
to see the View menu and adjust the settings, then turn
the camera dial back to . See Chapters 4 and 5 for more
information.
The current setting for the time lapse interval (hours,
minutes, and seconds) appears in the center of the
screen, with seconds highlighted.
Capturing Video Clips and Special Shots
3-5
4
Press the buttons next to the up and down arrows to
change the highlighted setting, then press the button
under the left arrow to move to the next setting and
repeat the process. Continue until you’ve set the correct
interval.
7
To stop taking pictures, press the POWER button to
turn off the camera.
The number of photos you can take is limited by the space
on the CompactFlash memory card. With a higher capacity
card, you can store more pictures. (See Appendix B for more
information.)
NOTE
You can also choose the maximum interval (24 hours) or the
minimum interval (10 seconds) by pressing the button next
to Max/Min.
TIP
You can use a program like QuickTime™ Pro, Macromedia
Flash™ or Adobe ImageReady™ (included with Photoshop 5.5)
to turn your interval photos into time lapse movies that you can
play on your computer or on the Internet. Set the camera to
Standard image quality or resize your images in an image
editing program for a manageable movie file size. You can also
use QuickTime Pro to edit your video clips. See your program’s
documentation for more information.
5
6
Press the button next to Sound to turn the setting to
Off or On.
Press the shutter button to take the first picture.
The camera turns off automatically after you take the
first picture, then turns on again after the selected
interval to take the next photo.
While the camera is on in this mode, Int appears
in the display panel.
Capturing Video Clips and Special Shots
3-6
.
4
Framing, Focusing, and Zooming
our camera has great shot-capturing capabilities that
Y
allow you to get the exact image you want. You can use
the 2× digital zoom, frame your image as a panorama, or
focus in on a close object with macro mode. You can also
manually focus the camera to a fixed point. This chapter
includes the following sections:
◗ Taking digital zoom pictures
◗ Taking panoramic pictures
◗ Taking close-ups with macro mode
◗ Adjusting the focus
Taking Digital Zoom Pictures
A
B
Digital zoom pictures are magnified two times (2×). The
automatic cropping effect makes file sizes smaller. In HyPict
mode, the camera uses interpolation to give you more image
data for a better final printed image.
Framing, Focusing, and Zooming
4-1
Follow these steps to take digital zoom pictures:
The words DIGITAL ZOOM appear on your LCD
briefly. A yellow frame appears around the previewed
image, and the setting changes to ×2.
1
Turn the camera dial to . You see the View menu.
3
4
Press the shutter button halfway to lock the auto focus
and exposure. When the camera locks its settings, the
photo capture light stops flashing and you see a green
circle and flash and exposure settings on the screen. If
you want, you can reframe your picture while holding
the button down.
NOTE
This example shows the View menu when the user mode is
set to Program. Depending on the user mode setting, your
View menu may look different.
2
For Program or Full Auto mode, press the button next
to ×1. For Manual mode, press the button under Menu
Change, then press the button next to ×1.
Press the button all the way down to capture the image.
The digital zoom format remains active until you change it
or turn off the camera.
Framing, Focusing, and Zooming
4-2
You see the View menu. The current frame setting
appears in the bottom right corner.
NOTE
Since the digital zoom mode magnifies the image by cropping it,
there is less information and the file is smaller. It’s best to print
the image in a smaller format, such as 4 × 6 inches.
Taking Panoramic Pictures
Images in the panorama mode are long and narrow, although
they are not captured at a wider angle than normal images.
Strips at the top and bottom of the image area are cropped
out. The resulting smaller image sizes mean you can store
more pictures in the panorama format.
NOTE
This View menu illustrates what you see if your user mode is
set to Program. Your View menu will look different if the
user mode is set to Manual or Full Auto.
You can take panoramic pictures using any user mode.
Follow these steps:
2
Press the button next to the frame setting to cycle
through the frame settings until you see the
(panorama) setting.
1
Turn the camera dial to
.
Framing, Focusing, and Zooming
4-3
For a few seconds, the word PANORAMA appears on
the LCD screen, and a black frame appears around the
previewed image.
Taking Close-Ups With Macro Mode
You can use the camera’s macro mode to take pictures as
close as 2.36 inches (6 cm).
NOTE
◗
When you take macro close-ups, you should use a tripod (as
described in Appendix B) and disable the flash. Otherwise,
your pictures may appear blurry and washed out.
◗
If you are taking close-ups between 2.36 inches (6 cm) and
8 inches (20 cm), the camera must be zoomed all the way
3
4
Press the shutter button halfway to lock the auto focus
and exposure. When the camera locks its settings, the
photo capture light stops flashing and you see a green
out. Press the W (wide angle) button until the
icon is
highlighted in yellow and you can’t zoom any further.
circle
on the screen. If you want, you can reframe
Follow these steps:
your picture while holding the button down.
1
Turn the camera dial to . You see the View menu.
Press the button all the way down to capture the image.
The Panorama mode remains active until you change it or
turn off the camera.
Framing, Focusing, and Zooming
4-4
4
Press the button all the way down to capture the image.
NOTE
This View menu illustrates what you see if your user mode is
set to Program. Your View menu will look different if the
user mode is set to Full Auto or Manual.
Macro mode remains active until you change it or turn off
the camera.
Adjusting the Focus
The PhotoPC 3000Z lets you manually select a fixed focus.
2
Press the button next to the frame setting until you see
the (macro) setting.
Follow these steps:
A green frame appears around the preview image and for
a few seconds, the word MACRO appears on the LCD
screen.
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
2
3
Turn the camera dial to
.
If you want to use the macro feature or take panoramas,
press the button next to the frame setting until
(macro) or
(panorama) appears.
3
Press the shutter button halfway to lock the auto focus
and exposure. When the camera locks its settings, the
photo capture light stops flashing and you see a green
circle on the screen. If you want, you can reframe
your picture while holding the button down.
Framing, Focusing, and Zooming
4-5
4
Press the button under Menu Change until the
6
7
Press the shutter button halfway to lock the camera’s
exposure settings. When the camera locks its settings,
the photo capture light stops flashing and you see a
green circle on the screen. You also see the shutter
speed and aperture setting at the top of the screen in
yellow. If you want, you can reframe your picture while
holding the button down.
following screen appears:
focus setting
Press the button all the way down to capture the image.
5
Press the buttons next to the up and down arrows to
select a manual focus setting.
Your manual focus setting remains active until you change it
or change your user mode.
If the camera is set to Normal Frame or
, you can
choose from the following settings:
AF
The camera determines the focus automatically.
Focal point is about three feet.
Focal point is about 10 feet.
Focus is infinity.
If you’re using the macro mode, you can choose
either M1 (focal point is about 8 inches) or M2 (focal
point is about 20 inches).
Framing, Focusing, and Zooming
4-6
.
5
Adjusting Exposure and Color Settings
ight is one of the most important considerations for
taking great photographs. Good color composition is
Adjusting Exposure
L
also invaluable. Your PhotoPC 3000Z gives you complete
control over exposure, color, and other lighting condition
settings. See the following sections to change your settings:
◗ Adjusting exposure
◗ Adjusting the sensitivity setting
◗ Adjusting the white balance setting
◗ Changing the metering method
◗ Fixing condition settings
◗ Exposure and color tips
Your camera normally adjusts exposure automatically.
However, you may want to increase the exposure setting if
you want to lighten your picture or if you’re taking pictures
of an object against a bright background (where your subject
may be underexposed), such as sand or snow on a sunny day.
A
B
NOTE
The settings in this chapter require that you set your user mode
to Manual or Program. See page 1-9 to change the user mode
for your camera.
Adjusting Exposure and Color Settings
5-1
Similarly, you may want to decrease it if you want to darken
the picture, or if you’re taking pictures against a dark
background (where your subject may be overexposed).
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the MENU button to see
the Viewfinder menu.
With the PhotoPC 3000Z, you can select automatic
exposure settings, or you can fine-tune the exposure
manually by setting the shutter speed and aperture setting.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
3
Press the button next to the up arrow to increase the
exposure setting, or the button next to the down arrow
to decrease it.
Changing the Automatic Exposure Value
The Exposure Value (EV) is a combination of aperture,
shutter speed, and flash settings that will adjust the camera’s
automatic exposure to lighten or darken the image.
In Program mode, you can select from nine settings in
increments of 0.5, from −2.0 to +2.0 EV.
NOTE
The flash is not affected by the exposure value setting when it is
set to forced flash or
optional external flash.
flash off, or when you’re using an
Follow these steps to select predefined exposure settings:
Viewfinder
LCD Screen
1
Make sure that the camera is set to Program or Manual
user mode. (See page 1-9 for details.)
2
Turn the camera dial to
or
.
Adjusting Exposure and Color Settings
5-2
In Manual mode, make sure the exposure setting is
Auto Exposure. You can choose from 21 settings in
increments of 0.2, from −2.0 to +2.0 EV.
Setting Shutter Speed and Aperture
Experienced photographers can set the exposure manually by
adjusting the shutter speed and aperture settings.
NOTE
To set the aperture setting and let your camera automatically
determine the shutter speed, you can use the Aperture Priority
settings; see page 5-4.
Viewfinder
LCD Screen
Follow these steps to adjust the settings:
The setting appears in the status display panel next to
the +/- icon and remains in effect while you take
pictures.
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
2
Turn the camera dial to
.
exposure setting
Adjusting Exposure and Color Settings
5-3
3
Press the button next to Auto Exposure to change the
Using Aperture Priority Settings
exposure mode to Manual.
You may want to select a specific aperture setting for a
desired effect. For example, you can set your camera to a
higher aperture setting (smaller opening), such as F8, to
sharpen your subject and soften the background. The camera
automatically selects the shutter speed based on the lighting
conditions.
set exposure
mode to
Manual
set shutter
speed
Follow these steps to set the aperture and let the camera
automatically determine the shutter speed:
set aperture
4
5
Press the button next to the up arrow to increase shutter
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
speed, or the button next to the down arrow to decrease
it.
2
Turn the camera dial to
or
.
Press the buttons under the left and right arrows to
change the aperture setting. (You can choose F2, F2.3,
F2.8, F4, F5.6, or F8.)
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu.
NOTE
The camera detects the lighting conditions and warns you when
exposure settings are outside the ideal range. If you see EV! on
the LCD screen, your image may be under- or overexposed.
Adjusting Exposure and Color Settings
5-4
3
Press the button next to Auto Exposure to change the
Adjusting the Sensitivity Setting
exposure mode to Aperture Priority.
With the PhotoPC 3000Z’s high
sensitivity settings, you can take
pictures of fast-moving subjects, or
flash. You can set the sensitivity from
the camera’s standard ISO equivalent
of 100 to an ISO equivalent of 200 or
400.
Viewfinder
LCD Screen
4
Press the buttons under the right and left arrows to
change the aperture setting. (You can choose F2, F2.3,
F2.8, F4, F5.6 or, F8.)
The arrow icons below ISO indicate the sensitivity setting:
The standard setting is equivalent to ISO 100. This
is the recommended setting for most pictures.
When you press the shutter button part way down to focus
the camera, the camera shows the exposure settings at the top
of the LCD screen.
The high sensitivity setting is equivalent to
ISO 200.
You can change the automatic exposure value to have the
camera select a lighter or darker range for your picture with a
slower or faster shutter speed. (See page 5-2.)
The super high sensitivity setting is equivalent to
ISO 400.
NOTE
Image quality is lower when you use high sensitivity settings.
Adjusting Exposure and Color Settings
5-5
Follow these steps to adjust the sensitivity setting:
◗ If the user mode is set to Manual, press the button
under Menu Change. You see the following
screen. Press the button under ISO to change the
sensitivity setting.
1
Make sure the camera is set to Program or Manual user
mode. (See page 1-9 for instructions.)
2
Turn the camera dial to
or
.
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu.
Viewfinder
LCD Screen
3
Do one of the following:
Adjusting the White Balance Setting
◗ If the user mode is set to Program, press the button
The PhotoPC 3000Z adjusts white balance automatically to
ensure color accuracy. However, you may want to change
this setting for special effects or lighting conditions.
under ISO to change the sensitivity setting.
You can select the following white balance settings:
AUTO Adjusts the white balance of your pictures
automatically. This is the recommended setting for
most pictures.
Viewfinder
LCD Screen
Adjusting Exposure and Color Settings
5-6
FIX
Locks the white balance setting at 5200 °K. This
setting gives your pictures a warmer appearance
under fluorescent lighting. It’s also a good choice
for retaining the reds in a sunset or sunrise.
3
Do one of the following:
◗ If the user mode is set to Program, press the button
under W/B to select FIX or CUSTOM.
CUST Lets you customize the white balance setting. See
page 5-8 to set the custom white balance.
Make sure the camera is turned on, then follow these steps to
change the white balance setting:
Viewfinder
LCD Screen
1
Make sure the camera is set to Program or Manual user
mode. (See page 1-9 for instructions.)
◗ If the user mode is set to Manual, press the button
under Menu Change. You see the following
screen. Press the button under W/B to select FIX or
CUSTOM.
2
Turn the camera dial to
or
.
In Viewfinder mode, press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
Viewfinder
LCD Screen
Adjusting Exposure and Color Settings
5-7
The setting, which appears in the status display panel
next to the W.B. mark, remains in effect while you take
pictures.
3
Press the button next to Shot SETUP to go to the Shot
SETUP menu.
white
balance
setting
NOTE
When nothing appears next to W.B. on the display panel, the
camera is in the fixed white balance mode.
4
5
Press the button below New W/B.
You see a screen asking you if you want to save a new
setting for the custom white balance mode. Press the
button next to Yes to save a new white balance setting.
Setting the Custom White Balance
Follow these steps to customize the white balance setting:
The camera’s lens moves out (if it isn’t already out). You
see a message with a framed area that the camera’s lens
uses to set the white balance.
1
Remove the camera’s lens cap and press the POWER
button to turn on the camera.
2
Turn the camera dial to
to display the SETUP
6
Focus the camera on a piece of white paper, or some
other object to set the white balance by, and press the
shutter button to save the setting.
menu. If necessary, change to Program or Manual user
mode.
Adjusting Exposure and Color Settings
5-8
7
Press the button under BACK to return to the main
3
Press the button under Menu Change. You see the
following screen. The current metering setting is in the
lower right corner.
SETUP menu.
Changing the Metering Method
If you’re using Manual mode, your camera lets you choose
between matrix metering and spot metering. With matrix
metering, the camera automatically samples light from the
entire image area and determines the correct exposure. You
can use spot metering to choose a point, such as your
subject’s face, to determine the exposure.
Viewfinder
LCD Screen
4
Press the button next to Metering to change the setting
Follow these steps to change the metering system:
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
When you take a picture with spot metering, make sure the
center of the camera’s lens is focused on the area on which
you want it to read the light.
2
Turn the camera dial to
or
.
In Viewfinder mode, press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
Adjusting Exposure and Color Settings
5-9
2
Press the button next to Shot SETUP. You see the Shot
Fixing Condition Settings
SETUP menu:
In manual mode, you can save your automatic exposure,
white balance, sensitivity, shutter speed, and aperture settings
for one photo, and apply them to other photos. This is useful
if you want a consistent appearance in a series of shots.
NOTE
You can’t use fixed settings when you are using an optional
external flash.
3
4
Press the button next to FixSet to change the setting to
On.
Enabling Fixed Settings
Make sure your camera is set to Manual mode as described
on page 1-9. Then follow these steps to enable fixed settings:
Press the button under BACK to return to the SETUP
menu.
section below.
1
Turn the dial to
and press the POWER button to
turn on the camera. You see the SETUP menu:
Adjusting Exposure and Color Settings
5-10
Capturing Shots With Fixed Settings
NOTE
After you have enabled fixed settings as described in the
section above, follow these steps:
For detailed instructions on taking pictures, see Chapter 2.
Your camera processes the picture and saves its settings.
Then you see a settings confirmation screen:
1
2
Turn the camera dial to
.
Press the button next to the exposure setting to change
the exposure mode to Fixed Settings.
5
Press the button next to Yes to save the settings, or press
the button next to No if you don’t want to save them
(repeat the steps above to fix new settings). You return
to the View screen.
3
4
Center your subject on the screen,
then press the shutter button halfway
down to lock the auto focus and
exposure.
After you save the settings, you can do the following
before taking more pictures:
You see a green circle on the screen when the camera
locks the settings.
◗ Press the button under FixSet Info to see the
settings you have saved. (Press the button under
BACK to return to the View screen.)
Press the shutter button the rest of the
way down to take the picture.
Adjusting Exposure and Color Settings
5-11
◗ Press the button under FixSet Cancel to delete the
settings you have saved. (Repeat steps 1 through 5
to fix new settings.)
◗ Use a fast shutter speed or smaller aperture setting.
◗ Use an optional filter with the camera’s included lens
adapter to cut down on excessive light.
6
Take any other pictures you want with the fixed settings.
The settings are saved until you delete them.
If the sky is cloudy:
◗ Increase the exposure setting.
◗ Try using fixed white balance.
◗ Increase the sensitivity.
NOTE
If your camera is without battery power for over one hour, you
will lose the fixed settings (along with the time and date and
other camera settings). To prevent this from occurring, you can
connect the camera to an optional AC adapter when you are
charging your batteries or keep a spare set of charged batteries.
See Appendix B for information.
◗ If there is complete cloud cover, avoid taking landscape
photos. Portraits and closer shots are better choices
under cloudy conditions.
If you are capturing a sunset or sunrise:
◗ Use the fixed white balance setting.
◗ Adjust exposure settings for different
Exposure and Color Tips
Getting the right lighting in your shots can be complicated.
effects.
◗ Take several shots at different times to capture the
changing colors. (To do this automatically, set up
interval shooting as described in Chapter 3.)
These tips provide suggestions for various conditions.
If you are taking pictures in bright
sunlight:
◗ Reduce the exposure setting.
Adjusting Exposure and Color Settings
5-12
If you are taking pictures in low light or
at night:
◗ Avoid taking portraits under fluorescent lights.
If you are taking portrait photos:
◗ Increase the sensitivity setting.
you center your subject when you
◗ Increase the exposure setting.
lock the exposure with the two-step
◗ Use a wide aperture or slow shutter speed setting to let
shutter. Then you can move the subject off-center while
you are holding the shutter button down. (See
Chapter 2 for details on using the two-step shutter.)
in more light.
◗ If your subject is in the shade with a sunny background,
try using spot metering and focusing the camera on your
subject.
◗ Try using the Portrait setting in Program mode (see
Chapter 2).
◗ For photographs taken at night, use the slow
synchronized flash mode. The leading setting sets off the
flash first, then exposes the subject and takes the picture.
In this mode, hold the camera still or use a tripod (see
Appendix B). The trailing setting flashes at the end of
the exposure, allowing you to capture background
motion while freezing your subject. (See Chapter 2 to
change the setting to leading or trailing.)
◗ Be aware of lighting conditions and how they affect the
appearance of your subject. Early morning, late
than direct sunlight.
◗ If you need to take a portrait under fluorescent or other
unflattering indoor light, use the fixed or user-defined
white balance.
If you are taking photographs under
fluorescent lighting:
◗ Use the red-eye reduction flash mode for portraits. If
you are taking portraits in bright light, you still may
want to use the flash to correct for the camera’s exposure
adjustments.
◗ Use custom or fixed white balance.
Adjusting Exposure and Color Settings
5-13
.
Playing Back Photos
6
he LCD screen lets you play back your pictures one-
by-one or in groups of four or nine. You can magnify
T
or delete selected pictures and customize playback features.
You can also view your pictures on a television as easily as on
the camera’s screen. This chapter explains the following:
◗ Playing back pictures one-by-one or several at a time
◗ Deleting pictures
◗ Locking and unlocking pictures
◗ Adding, playing back, and deleting audio recordings
◗ Magnifying pictures
A
B
NOTE
◗ Playing back video clips
You can play back all your photos, sounds, and video clips on a
TV, projector, or VCR using the video cable that came with your
camera. See page 14-10 for details.
◗ Viewing detailed information about a picture
◗ Playing pictures as a slide show
Playing Back Photos
6-1
Playing Back Pictures One by One
Playing Back Multiple Pictures
When you set the camera dial to
and press the POWER
You can play back your pictures in Multi mode to view small
button, you see the last picture you took on the LCD screen
“thumbnail” versions of either four or nine pictures at once.
(you’ll notice a delay if the picture was taken in Tiff mode):
Follow these steps to play back multiple pictures:
1
2
Turn the camera dial to and press the POWER
button. You see the last picture you took on the LCD
screen. (You’ll notice a delay if the last picture was taken
in Tiff mode.)
Press the button below Multi. Small thumbnail images
of the last four pictures you took appear on the screen,
with the currently selected image framed in white.
Press the button next to the right arrow to display the earliest
picture taken. Continue pressing the button to view your
pictures in order. Press the button next to the left arrow to
move backward through your pictures.
NOTE
After a designated period of inactivity, the camera automatically
shuts off to conserve battery power. If this happens, press any
button on the back of the camera to “wake” the camera. If you
are using the AC adapter, the camera shuts off after 15 minutes.
3
If you want to display nine pictures at once, press the
button under 1/9.
Playing Back Photos
6-2
4
5
Press the arrow buttons to move the white selection
frame through the images on screen, or hold one of these
buttons down to move through the images quickly.
Deleting the Currently Displayed Picture
Set the camera dial to , then follow these steps:
1
Press the buttons next to the right and left arrows to
scroll to the image you want to delete. (You’ll notice a
delay if the picture was taken in Tiff mode.)
When the frame passes the first or last image of the
current group, the previous or next three images are
displayed in the group.
NOTE
To switch back to displaying one picture at a time, press
To make choosing images easier (and faster for Tiff mode
images), you can display four or nine images at a time by
pressing the button under Multi once or twice.
the button under 1/1.
Deleting Pictures
The LCD screen provides two different methods for deleting
images after you play them back:
◗ You can delete the currently displayed picture
◗ You can select multiple pictures for deletion, or “lock”
pictures to protect them from deletion
2
3
Press the button under Delete. A confirmation message
You can also delete images through your software when the
appears.
camera is connected to your computer (see Chapter 10).
Press the button next to Yes to delete the image, or the
button next to No to cancel.
Playing Back Photos
6-3
Deleting All Pictures
Deleting Selected Pictures
To delete all the images from your memory card, make sure
You can select two or more images and then delete them all
at once. Make sure the camera dial is set to , then follow
these steps:
the camera dial is set to , then follow these steps:
1
2
Press the button next to Select Image.
1
Press the button next to Select Image to see the image
Press the button next to Delete All to delete all the
selection screen:
images in your card. A confirmation message appears.
3
4
Press the button next to Yes to delete the images, or the
button next to No to cancel.
Press the button under BACK to return to the main
playback menu.
NOTE
If any images are locked, you see a
screen like the one shown:
To delete all the photos, press the
button next to Yes. To delete only
unlocked photos, press the button next
to No. Press the button under Cancel if you don’t want to delete
any images. See page 6-5 for instructions on unlocking images.
Playing Back Photos
6-4
2
Press the buttons next to the right and left arrows to
move the frame to an image you want to delete. Then
press the button next to Select to Delete. A Delete
icon appears on the image and the word Select to
Delete changes to Cancel Delete.
4
After you’ve finished selecting images to delete, press the
button under BACK to return to the main playback
menu and delete them.
A confirmation message appears. Press the button next
to Yes to delete the selected images, or the button next
to No to cancel.
Locking and Unlocking Pictures
The lock feature allows you to keep your images from being
accidentally deleted. You can lock selected images or all the
images in the camera. Make sure the camera dial is set to
then follow these steps to lock pictures:
,
NOTE
If you change your mind, press the button next to Cancel
1
Press the button next to Select Image to see the image
Delete to deselect the image.
selection screen:
3
Repeat step 2 to select any additional images.
Playing Back Photos
6-5
2
3
Press the buttons next to the right and left arrows to
move the frame to an image you want to lock. Then
press the button under Lock.
Adding Audio Recordings
You can add audio recordings to images stored on your
memory card.
A lock icon appears in the top left corner of the screen
and the word Lock changes to Unlock. Repeat this step
to lock any additional images.
Follow these steps to add a recording to an existing image:
1
Turn the camera dial to to select playback mode.
Press the buttons next to the right and left arrows to
move the frame to an image you want to unlock. Then
press the button under Unlock.
The lock icon disappears from the top left corner of the
screen and the word Unlock changes back to Lock.
Repeat this step to unlock any additional images.
2
3
Press the buttons next to the right and left arrows to
move to the photo to which you want to add a
recording. (If you’re displaying multiple images, you’ll
see a white frame around the currently selected photo.)
Press the button under Menu Change until the screen
changes, then press the button under Sound.
Playing Back Photos
6-6
You see the Sound menu:
5
6
Speak clearly into the microphone on the back of the
camera. (Press the button under Stop to stop recording
at any time.)
A microphone icon appears in the upper left corner of
the image to indicate that a recording has been added.
Press the button under BACK twice to return to the
main playback menu.
4
Press the button next to Sound Rec. A ten second
countdown of the recording time appears on the screen.
Playing Back Audio Recordings
Your camera has a speaker that allows you to play back your
recordings. You can also play audio recordings in your
camera’s slide shows (see page 6-12).
NOTE
If an image is locked, you see a warning message. Press the
button next to Yes to record audio. Or, press the button
under No to return to the sound menu.
Make sure your camera dial is set to , then follow these
steps:
If there’s already a recording on the selected photo, a
confirmation message appears. To erase the old recording
and make a new one, press the button next to Yes. Or press
the button next to No to cancel.
1
Press the buttons next to the right and left arrows to
move to the photo for which you want to hear a
recording.
2
Press the button under Menu Change.
Playing Back Photos
6-7
3
4
Press the button under Sound. You see the Sound
3
4
Press the button under Sound. You see the following:
menu, as shown to the right.
Press the button next to Sound Play. If you want to
stop the playback, press the same button again (next to
Sound Stop).
Deleting Audio Recordings
You can also delete audio recordings that you’ve added to the
Press the button under Delete Sound to delete the
recording. A message appears asking you to confirm the
deletion.
pictures on your memory card.
Make sure your camera dial is set to , then follow these
steps:
5
6
Press the button next to Yes to confirm, or next to No
to cancel.
1
Use the buttons next to the right and left arrows to move
to an image whose attached recording you want to erase.
(If you’re displaying multiple images, you’ll see a white
frame around the currently selected photo. You’ll see a
microphone icon in the upper left corner if the image
has a recording attached.)
Press the button under BACK twice to return to the
main playback menu.
Magnifying a Picture
You can zoom in to enlarge a portion of your image on the
LCD screen and view it in greater detail. Then you can use
the camera’s buttons to scroll the image.
2
Press the button under Menu Change.
Playing Back Photos
6-8
Make sure the camera dial is set to , and follow these steps:
2
To scroll through different areas of the magnified image,
press the buttons next to the up and down arrows to
move up or down, or the buttons under the left and
right arrows to move left or right. (Hold the button
down to scroll quickly in one direction.)
1
To enlarge the currently displayed image, press the
button next to the magnifying glass.
NOTE
When you magnify a panoramic picture, you can only scroll
left and right.
3
To exit the screen, press the button under BACK.
A magnified view of the center section of the picture
appears. An icon in the top left corner of the screen
indicates which area of the image is currently shown.
Playing Back Video Clips
You can play back video clips that you capture on your
PhotoPC 3000Z. You can play them forward or backward,
delete them, pause, rewind, fast forward, or move backward
or forward, one frame at a time. Follow these steps:
1
Turn the camera dial to . You see the last picture you
took on the LCD screen. (If you haven’t taken any
photos, you see a gray screen with the following message:
There is no image.)
Playing Back Photos
6-9
2
3
Press the button under Menu Change.
it a third time to view one image at a time again. (You
can’t select reverse playback if you are viewing multiple
thumbnails.)
Press the button next to Video Clip. You see the video
clip playback screen.
7
Press the button next to Play. You see your video clip
playing in a screen like the following:
4
5
Press the buttons next to the left and right arrows to
select a video clip.
8
9
To slow down the playback, press the button next to
Change Speed. Press it again to go back to normal
playback speed.
If you want to view the video clip backward, press the
button under Fwd (forward). Fwd changes to Rev
(reverse).
Press and hold the button next to the right arrows to fast
forward the video (release the button to play).
6
If you want to view multiple thumbnails of your video
clips, press the button under Multi. Press it once to view
four thumbnails or twice to view nine thumbnails. Press
10 Press and hold the button next to the left arrows to
rewind the video (release the button to play).
Playing Back Photos
6-10
11 To pause the video, press the button under Pause.
Deleting a Video Clip
Follow these steps to delete a video clip:
1
Turn the camera dial to . You see the last picture you
took on the LCD screen. (If you haven’t taken any
photos, you see a gray screen with the following message:
There is no image.)
You can do the following while the video is paused:
2
3
Press the button under Menu Change.
◗ Press the button next to Fwd to move the clip
Press the button next to Video Clip. You see the video
forward one frame.
clip playback screen.
◗ Press the button under Rev to move the clip
backward one frame.
◗ Press and hold the button next to the right arrows
to fast forward (release the button to pause).
◗ Press and hold the button next to the left arrows to
rewind (release the button to pause).
4
5
Press the buttons next to the left and right arrows to
select a video clip.
Press the button under Restart to restart the video.
12 Press the button under Quit to stop playing the video
Press the button next to Delete to delete the selected
clip.
video clip.
Playing Back Photos
6-11
6
You see a confirmation screen. Press the button next to
Yes to delete the video clip. Press the button next to No
if you don’t want to delete it.
2
Press the button next to Info to display information for
the currently selected image.
Viewing Picture Information
You can use the LCD screen to view detailed information
about individual images, including date and time taken,
shutter speed, exposure settings, aperture and white balance
settings, and flash settings.
3
Press the button under BACK twice to return to the
main playback screen.
To display image information, follow these steps:
1
Turn the camera dial to , then press the button under
Playing Your Pictures as a Slide
Show
Menu Change. You see the following:
You can use the LCD screen to play back your pictures in a
continuous “slide show.” You can even control the slide
show’s speed and pauses. Follow these steps:
1
Turn the camera dial to . Then press the button under
Menu Change.
Playing Back Photos
6-12
2
Press the button under SLIDE SHOW. You see the
NOTE
following:
You can also turn sound on or off, rotate the images, or
exclude specified images from your slide show. See the
following sections for instructions.
4
Press the button next to Start to begin the slide show.
To pause the slide show, press the button under Pause.
Press the same button (under Restart) to restart it.
3
Press the button next to 3 Sec to select the slide show
speed. You can have the image change automatically
every 3 or 5 seconds. (When sound is turned on, the
camera displays an image until its entire recording has
played.)
While the slide show is paused, you can move backward
through the slides by pressing the button under Rev.
You can move forward by pressing the button next to
Fwd. You can also exclude an image from the slide show
by pressing the button next to Exclude.
If you select Manual, you can move through your
To stop the slide show, press the button under Quit.
images manually, by pressing the Fwd and Rev buttons.
If you select Shuffle, your images play in random order
NOTE
At the end of the slide show, a black screen with the message
“fin!” appears. Then the camera shuts off. Press any button on
the back of the camera to turn it back on in playback mode.
and display for 3 seconds.
Playing Back Photos
6-13
Playing Sounds With Your Slide Show
You can turn the audio recordings for your images on or off
when you display your slide show. Follow these steps:
Excluding Pictures From a Slide Show
All pictures saved in your camera’s memory card are
automatically included in the slide show. To exclude any
pictures from the slide show, follow these steps:
1
Turn the camera dial to . Then press the button
under Menu Change.
1
Turn the camera dial to . Then press the button under
Menu Change.
2
Press the button under SLIDE SHOW. You see the
following:
2
3
Press the button under SLIDE SHOW.
Press the button next to Settings. The slide show
settings screen appears:
3
Press the button next to Sound OFF to change the
setting to Sound ON. (If the setting is Sound ON, you
can press the same button to turn it to Sound OFF.)
4
Press the buttons next to the right and left arrows to
select the picture you want to exclude from the slide
show. (If you want, press the button under Multi to
display multiple pictures.)
Playing Back Photos
6-14
5
Do one of the following:
NOTE
Once you exclude images, the camera plays images that are
included at that time only (new photos are automatically
excluded). If you take new photos and want to play them in your
slide show, select them or press the button next to Select All to
include all your pictures.
◗ Press the button next to Exclude to exclude the
selected picture.
◗ Press the button next to Exclude All to exclude all
pictures.
The number that normally appears in the top left corner
of each slide show image disappears for excluded photos.
Rotating Pictures in a Slide Show
You can display pictures in your slide show rotated 90
degrees to the right or left. Follow these steps:
NOTE
If you change your mind, move the white frame to the
picture you want to include again and press the button next
to Select. Or press the button next to Select All to include
all pictures.
1
Turn the camera dial to to display the playback
menu, then press the button under Menu Change.
2
Press the button under SLIDE SHOW. You see the slide
show menu:
6
When you’re finished, press the button under BACK to
return to the slide show menu.
Playing Back Photos
6-15
3
Press the button next to Settings to display the slide
To rotate the image 90 degrees to the right, press the
button under Rotate twice. (Press it once more to rotate
the image back.)
show settings screen:
NOTE
You can’t rotate images that have been excluded from the
slide show. If you want to include an excluded image, press
the button next to Select and then rotate it.
4
5
Press the buttons next to the right and left arrows to
frame the image you want to rotate.
6
Repeat steps 4 through 5 to select and rotate more
pictures. When you’re finished, press the button under
BACK to save your changes and return to the slide show
menu.
NOTE
To make it easier to view your picture, press the button
under Multi to display multiple images, then use the arrow
buttons to select an image.
To rotate the image 90 degrees to the left, press the
button under Rotate once. (Press it two more times to
rotate the image back.)
Playing Back Photos
6-16
.
Adjusting Camera Settings
7
our camera has many options that you can change to
Setting the Auto Power Off Time
Yconfigure the camera to work exactly the way you want.
The automatic power off feature saves battery power by
automatically putting the camera into sleep mode when it’s
idle for a designated period of time. You can set the camera
to turn off after 10 seconds, 30 seconds, one minute, three
minutes, or five minutes.
This chapter describes the following:
◗ Setting the auto power off time
◗ Turning the camera alert sounds on or off
◗ Adjusting the LCD brightness
◗ Setting the camera volume
◗ Setting the time and date
NOTE
Automatic power off settings are in effect only when you’re using
batteries to power the camera. When your camera is connected
to the AC adapter, it shuts off after 15 minutes.
◗ Setting the language
A
B
Adjusting Camera Settings
7-1
Follow these steps to change the power off interval:
Turning the Camera Alert Sounds On
or Off
1
Turn the dial to
. You see the SETUP menu:
Normally, the camera clicks to let you know when an image
has been captured and beeps whenever you press any of its
buttons. However, you can turn some or all of the alert
sounds off. Follow these steps:
1
Turn the camera dial to
to display the SETUP
menu. Then press the button under Camera SETUP.
You see the Camera SETUP menu (shown to the left).
2
Press the button below Camera SETUP to go to the
Camera SETUP menu. The current power off setting
appears in the upper right corner of the screen.
2
Press the button under Beep to cycle through these
choices:
power off
setting
◗ Shutter
The camera clicks when an image is
captured.
◗ Never
Turns all sounds off.
◗ Always
The camera beeps whenever you press
a button and clicks when the camera
captures images.
3
Press the button next to the current setting to select a
new setting.
Adjusting Camera Settings
7-2
Adjusting the LCD Brightness
Setting the Camera Volume
To adjust the brightness of the LCD screen, follow these
You can change the camera’s volume for playing back audio
steps:
recordings and alert sounds. Follow these steps:
1
Turn the camera dial to
to display the SETUP
1
Turn the camera dial to
to display the SETUP
menu. Then press the button under Camera SETUP.
menu. Then press the button under Camera SETUP.
You see the Camera SETUP menu.
You see the Camera SETUP menu (shown to the left).
2
3
Press the button next to Volume to change the setting
to Hi or Low.
Press the button under BACK to return to the SETUP
menu.
2
Press the buttons next to the up and down arrows to
adjust the screen brightness.
Adjusting Camera Settings
7-3
2
Press the button next to the time and date to display the
following screen. The month is highlighted in red.
Setting the Time and Date
The camera remembers the time and date settings you made
when you formatted your memory card, unless it goes
without battery power for more than an hour.
If you need to reset the time and date for any reason, follow
these steps:
1
Turn the camera dial to
menu.
to display the SETUP
3
4
5
Press the buttons next to the up and down arrows to
adjust the setting, then press the button under the right
arrow to highlight the day.
You see the camera’s date and time settings in the upper
right corner of the screen.
Repeat step 3 for each item you want to change. (To
return to a previous setting, press the button under the
left arrow.)
camera
date and
time setting
When you’re done, press the button under BACK to
save the settings and return to the SETUP menu.
Adjusting Camera Settings
7-4
Setting the Language
You can choose from eight languages for information
displayed on the LCD screen.
Follow these steps to change the language setting:
1
2
Turn the camera dial to
menu.
to display the SETUP
Press the button under the
icon to go to the
Language/Signal setup menu.
3
4
If necessary, press the buttons under the arrows to
highlight English.
Press the button under BACK to save the setting and
return to the SETUP menu.
Adjusting Camera Settings
7-5
.
Creating DPOF Files for Processing
8
our PhotoPC 3000Z includes an internal program,
Introduction to the DPOF Standard
YPrint Mark, that lets you set up your images for
printing in the DPOF format. You can drop off your
CompactFlash memory card at a photo finishing lab or insert
your card in a DPOF-compatible printer and get the exact
printouts you need.
The Digital Print Order Format (DPOF) is a digital print
standard that lets you create a file containing all the
information a photo finishing lab needs to print your photos.
You can also use DPOF files with DPOF-compatible photo
printers. Simply use Print Mark to select photos to print,
specify the number of copies, and store the information in a
DPOF file on your camera’s CompactFlash card.
This chapter includes the following sections:
◗ Introduction to the DPOF standard
◗ Making the DPOF file
NOTE
Some photo finishing labs and digital photo printers don’t support
the DPOF standard. Contact your local lab or read your printer
documentation to see if DPOF printing from CompactFlash
memory cards is available.
◗ Confirming and changing DPOF files
◗ Deleting DPOF files
A
B
◗ Reading error messages
Creating DPOF Files for Processing
8-1
2
Press the button next to PrintMark. The Print Mark
Making the DPOF File
program’s main menu appears on the screen:
The Print Mark program on your PhotoPC 3000Z lets you
make a Digital Print Order Format file and save it on your
camera’s CompactFlash memory card in one of two formats:
◗ Standard layout prints one photo per sheet
◗ Index layout prints several thumbnail photos per sheet
When you select Standard layout, you can choose to have an
index sheet printed with your standard photo sheets, if you
want.
3
4
Press the button next to New settings.
If you’ve previously made a DPOF file, you see a
message warning that you will lose those settings. Press
the button next to Done to delete the old file and set up
a new file, or press the button next to Cancel to save the
old file and return to the main menu.
Only one DPOF file can be stored on your camera’s
CompactFlash memory card at a time. However, you can
always add or delete images in the file or change the way it is
set up before printing.
Follow these steps to make a new DPOF file in Standard or
Index layout:
Press the button next to Standard to select Standard
layout for printing one photo per sheet.
Or, press the button next to Index to print several
thumbnails of your photos on each sheet.
1
Turn on your camera and turn the camera’s dial to
.
Creating DPOF Files for Processing
8-2
5
6
If you are using the Standard layout, go to step 6 to
select images.
To enlarge a selected picture, press the button next to
the magnifying glass. Press the button under Back to
return to the selection screen.
If you are using the Index layout and you want to print
only selected images, press the button next to Index
print, then go to step 6. If you want to print all your
images in the index, skip to step 12.
NOTE:
The Print Mark program displays up to 1000 pictures. Even if
more pictures are stored in your memory card, the program
displays only the first 1000.
Press the button next to Select Image. You see your
saved images:
8
9
Press the buttons next to the up and down arrows to
specify how many sheets (0 to 99) of each selected photo
you want to print. When you select one or more sheets
for a photo, a red check mark appears over the image.
Repeat steps 7 and 8 to set the number of sheets for each
image you want to print. Once you have finished
selecting photos, press the button under Back.
7
Press the buttons under the left and right arrows to select
a photo. A white frame indicates your selection, and the
number at the bottom of the screen shows the picture
number.
Creating DPOF Files for Processing
8-3
You see a screen confirming the number of original
photo frames you have selected to print:
11 If you want to add an index print to a Standard layout
file, press the button next to Add Index. Then press the
button next to Index print to select None, Selected
(the images you have selected for printing), or All.
If you are creating an Index layout file, go to step 12.
12 Press the buttons under the left and right arrows to select
the number of copies (up to 99) for your index print.
Then, if you are creating an index for a Standard layout
file, press the button under Back.
10 If you want to change your selections, press the button
under Back.
13 Press the button next to Save.
To quit Print Mark and keep your previous file settings,
press the button next to Cancel.
14 At the Confirmation screen, check your settings and
press the button under Save to save your DPOF file.
To save your selections, press the button next to Done.
You see a screen like the following:
15 Press the button under Exit to quit the Print Mark
program.
Creating DPOF Files for Processing
8-4
3
Press the button next to Confirm. You see the
Confirming and Changing the
DPOF File
confirmation screen.
Follow these steps to confirm or change a file:
1
2
Turn the camera’s dial to
.
Press the button next to PrintMark. The Print Mark
program’s main menu appears on the screen:
◗ To check the frame selections, press the button
under Confirm frame.
◗ To change the settings, press the button under
Change and follow steps 6 through 15 under
“Making the DPOF File.”
4
Press the button under Back to return to the Print Mark
main screen.
Creating DPOF Files for Processing
8-5
Deleting the DPOF File
Reading Error Messages
Follow these steps to delete a DPOF file:
If you see an error message on the camera’s LCD screen,
check the following table to respond to the message.
1
2
Turn the camera’s dial to
.
LCD screen messages
Press the button next to PrintMark. The main menu
Message
Description
appears:
No photos in memory.
This message appears when there are no photos
saved on the memory card. Press the button
under Back to return to the previous screen.
You cannot select any
more images.
You have selected the maximum number of
photos that the program will allow you to print.
Press the button under Back to return to the
previous screen.
No memory card
inserted.
The memory card isn’t inserted in the camera, or
it isn’t fully inserted into its slot. Insert a memory
card as described on page 1-13.
3
4
Press the button next to Delete. You see a confirmation
Error!
Unable to access
DPOF file.
This message may appear if the memory card is
removed while using the Print Mark program.
(Never remove a memory card during any
operation, otherwise you may be unable to use
the photos in the card.) Turn off the camera and
re-insert the memory card.
message.
Press the button next to Done to delete the DPOF file.
To keep the file and return to the main menu, press the
button next to Cancel.
Batteries are low. Use
AC adapter.
Battery power is almost out. Press the button
under Back to return to the previous screen. If
you have the optional AC adapter, connect it to
continue. Otherwise, replace the batteries with
batteries that have been fully charged.
5
Press the button next to Exit to close the Print Mark
menu.
Creating DPOF Files for Processing
8-6
LCD screen messages (Continued)
Message
Description
You will lose the last
print settings. Are you
sure?
There is already a DPOF file saved on the
memory card. If you create a new file, you
overwrite the saved print settings. Press the
button next to Done to create a new file, or
press the button next to Cancel to save the
settings.
DPOF file already
exists.
This message appears if the Print Mark program
tries to read a DPOF file made by a different
camera. Delete the file or create a new file.
Press the button next to Delete and make new
settings to create a new file, or press the button
under Back to save the file from the other
camera.
Unable to save DPOF
file. Not enough
memory available on
card.
The memory card doesn’t have enough space to
save a DPOF file. Press any button to return to
the main selection menu. To create a DPOF file,
delete any unnecessary photos and try again.
Creating DPOF Files for Processing
8-7
.
Using Your Camera With Your Computer
or Video Device
This section includes information about using your EPSON PhotoPC 3000Z camera and software to load your
photos onto your computer and work with them. It also explains how to to use your camera with your computer, print
out your photos, and connect your camera to a television, VCR, or other device. The following chapters are included
in this section:
9
Installing the Software and Connecting
10 Getting Photos Into Your Computer
11 Getting Your Photos Into Documents
12 Printing Your Photos
13 Operating the Camera From Your Computer
14 Presenting Your Photos
For troubleshooting, maintenance, and reference information (including specifications), see the next section,
“Troubleshooing and Reference.”
.
Installing Software and Connecting
9
efore you can download pictures and video clips to
The CD-ROM has these Windows and Macintosh
applications:
B
your computer’s hard drive, you need to install the
PhotoPC 3000Z software and connect the camera to your
computer.
◗ Sierra Imaging Image Expert (with the QuickTime
Player and Adobe Acrobat Reader) lets you transfer,
organize, and view your pictures, sounds, and video
clips. You can also use it to edit pictures and sounds.
This chapter includes the following information:
◗ Installing your software
◗ EPSON Photo!3 is a standalone application for
transferring, exporting, and uploading files. It also
includes EPSON Auto Downloader for quick and easy
file transfers and the EPSON Photo!3 TWAIN program
for importing files directly into TWAIN-compliant
applications.
◗ Connecting the camera
Installing Your Software
PhotoPC 3000Z comes with everything you need to transfer
your pictures, video clips, and sounds from the camera to
your computer, and then organize, enhance, and share them.
You can also upload pictures, sounds, and presentation
screens to the camera.
A
B
Installing Software and Connecting
9-1
◗ EPSON File Converter lets you convert files (including
presentation slides) into a file format that you can
upload into your camera.
Follow these steps:
1
Insert the PhotoPC 3000Z CD-ROM in your
computer’s CD-ROM or DVD drive. The install
program starts automatically.
◗ EPSON Photo! Print2 gives you an easy way to print
your pictures in the exact layout you want.
If it doesn’t start automatically, double-click My
Computer. Then double-click your CD-ROM icon.
Installing for Windows
You can install the software on your Windows 98,
Windows 95, Windows NT 4.0, or Windows 2000 system.
(See page C-6 for minimum system requirements.)
2
When you see the following setup screen, click the
Install Image Expert button.
NOTE
◗
If you are asked to restart your computer after any
installations, you can cancel and wait to restart until you have
installed all the PhotoPC 3000Z applications.
◗
If you are using Windows 2000 or Windows NT and you see
an error message that says that you must be logged on with
administrative privileges (or a similar message) or you are
unable to install the software, contact your system
administrator for assistance.
Installing Software and Connecting
9-2
3
Follow the instructions on the screen to install Image
Expert.
7
When you return to the Setup screen, click the Install
EPSON File Converter button. Follow the
instructions on the screen to install EPSON File
Converter.
NOTE
Make sure you check Install the Adobe Acrobat Reader
if you don’t already have it on your system. You use this
program to read your electronic Image Expert User’s
Guide.
8
9
When you return to the Setup screen, click the Install
EPSON Photo! Print2 button. Follow the instructions
on the screen to install EPSON Photo! Print2.
When installation is complete, click the Register
Image Expert Software button and follow the steps
on the screen to fill out and send or print the registration
form. When you are finished, you return to the Setup
screen.
4
5
If you checked Install the Adobe Acrobat Reader,
Image Expert starts the Adobe Acrobat Reader
installation. Follow the steps on the screen.
Next, Image Expert starts the QuickTime Player
installation. Follow the steps on the screen. When you
see a screen asking you for a registration number, leave
the space blank and click Next.
10 Click the Register EPSON PhotoPC 3000Z Digital
Camera button and follow the instructions on the
screen to register your camera.
11 When you are finished installing your software and
After installation is complete, you return to the Setup
screen.
registering, click Exit.
12 Restart your computer.
6
Click the Install EPSON Photo!3 button. Follow the
instructions on the screen to install EPSON Photo!3.
Installing Software and Connecting
9-3
3
4
Open the EPSON Photo!3 folder.
Installing on a Macintosh
You can install all the software on your PowerPC,™
Power Macintosh, iMac,™ iBook,™ or PowerBook
computer. (See page C-6 for minimum system
requirements.)
Double-click the Photo!3 Installer – Part 1 icon and
follow the instructions on the screen.
5
6
Open the EPSON File Converter folder.
Double-click the EPSON File Converter Install icon
and follow the instructions on the screen.
NOTE
◗
If your iMac is running OS 8.1, you’ll need to upgrade your
operating system to OS 8.5.1, or later, before installing your
camera software. To find out which operating system your
iMac is running, select About This Computer in the Apple
menu.
7
8
Open the EPSON Photo! Print2 folder.
Double-click the Photo! Print2 Installer (A) icon.
Then click OK to install Photo! Print2.
9
Open the Adobe Acrobat folder.
◗
If you are asked to restart your computer after any
installations, you can quit and wait to restart until you have
installed all the PhotoPC 3000Z applications.
10 Double-click the Reader Installer icon and follow the
instructions on the screen.
11 Double-click the Install Image Expert icon. Click
Follow these steps:
Continue and follow the instructions on the screen.
12 Click OK to install QuickTime and follow the
instructions on the screen. When you see a screen asking
for a registration number, leave that space blank and click
Continue.
1
Insert the CD-ROM in your computer’s CD-ROM or
DVD drive.
2
If necessary, double-click the PhotoPC 3000Z
CD-ROM icon to open it.
13 Restart your computer.
Installing Software and Connecting
9-4
14 From the PhotoPC 3000Z CD-ROM window, open the
To read the manual in Macintosh, double-click the Image
Expert User’s Guide icon on the PhotoPC 3000Z
CD-ROM. You can also copy the manual to your hard drive.
EPSON Camera Registration folder.
15 Double-click the PhotoPC 3000Z Registration icon.
When you open a manual in Acrobat Reader, you’ll see a
16 Click Register and follow the steps on the screen to
toolbar like this:
register your camera.
Reading Your Image Expert User’s Guide
Image Expert includes an electronic manual, the Image
Expert User’s Guide, that you can view on your computer
or print out.
last page
first page
show navigation
window
previous page
next page
With Acrobat Reader, you have several ways to navigate
through text:
You read the manual using Adobe Acrobat Reader, which
you installed with Image Expert.
◗ Use the navigation window on the left side of the screen
If you didn’t install Acrobat Reader, follow steps 1 through 5
and 11 through 12 under “Installing for Windows,” on
page 9-2, or steps 1 through 2 and 9 through 10 under
“Installing on a Macintosh,” on page 9-4 making sure to
select Acrobat Reader for installation.
◗ Use the arrow buttons in the toolbar or the vertical scroll
bar on the right side of the document to move through a
manual. (The box to the left of the scroll bar displays the
current page number.)
To read the manual in Windows, click Start, point to
Programs, Image Expert, then click Image Expert 1.8
User’s Guide.
◗ Click links, which are usually underlined or displayed in
a different color, to jump to a specific section.
For more information, see your Acrobat Reader online guide.
Installing Software and Connecting
9-5
3
Locate a serial port on the back of your computer. You
may have two serial ports labeled COM1 and COM2, or
the ports may be labeled with icons. If you have two
serial ports available, use COM1 (port 1).
Connecting the Camera
This section describes how to connect the camera to a
Windows PC using the PC serial cable, a Macintosh using
the Macintosh serial cable, and to a USB-compatible PC or
Macintosh using the USB cable.
NOTE
If you have a 25-pin serial port, you can use a 9- to 25-pin
adapter.
Note the following before you start:
◗ You can conserve battery life by using the optional AC
adapter when you connect the camera to your computer.
See page B-2 for instructions.
4
Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
◗ When you connect the camera, make sure your system is
not exposed to sources of electromagnetic interference,
such as stereo speakers or the base units of cordless
telephones.
Connecting to a Windows PC
Follow these steps:
1
2
Make sure the camera and your computer are off.
Locate the PC serial cable that came with the camera.
Installing Software and Connecting
9-6
5
Open the connector cover on the side of the camera.
Carefully insert the connector on the other end of the
cable into the camera’s serial interface port.
NOTE
If you have problems connecting to the COM port you have
selected, check your computer’s COM port configuration and
try again. If your computer has a high-speed serial board, you may
be able to transfer your pictures at the rate of 230.4KB per
second. If your camera software doesn’t set this speed
automatically, you can set it manually. See your Windows help
system and your computer’s documentation for instructions.
connector lock
button
Connecting to a Macintosh
Follow these steps:
NOTE
1
2
Make sure the camera and your computer are off.
To disconnect the cable from the camera, squeeze and hold
the connector lock button on the side of the connector while
you pull the cable out.
Locate the Macintosh serial cable that came with the
camera.
3
Locate the modem port
back of your Macintosh. You can use either port to
connect the camera.
or printer port
on the
6
Turn on the camera and turn the camera dial to , then
turn on your computer system.
Installing Software and Connecting
9-7
NOTE
NOTE
If you’re sharing a serial port that you use for another device,
make sure AppleTalk is turned off. Your Macintosh may not
recognize the camera if AppleTalk is on. If you have
problems connecting to the printer port, try connecting to
the modem port instead.
To disconnect the cable from the camera, squeeze and hold
the connector lock button on the side of the connector while
you pull the cable out.
5
Turn on the camera and turn the camera dial to , then
turn on your Macintosh system.
4
Open the connector cover on the side of the camera.
Carefully insert the connector on the other end of the
cable into the camera’s serial interface port.
On a PowerPC or PowerMac G3, you may be able to
transfer your pictures at the rate of 230.4KB per second. If
your camera software doesn’t set this speed automatically,
you can set it manually. See your Macintosh documentation
for instructions.
connector lock
button
Connecting the Camera with the USB Cable
You can connect the camera to your USB-enabled
Windows 98, Windows 2000, or Macintosh system using
the USB cable that came with your camera.
Installing Software and Connecting
9-8
3
Open the connector cover on the side of the camera.
Then insert the connector on the other end of the USB
cable into the camera’s USB interface port.
NOTE
◗
If you’re using Windows 98 or Windows 2000 and you see a
New Hardware screen, follow the instructions below.
◗
If your iMac is running OS 8.1, you’ll need to upgrade your
operating system to OS 8.5.1, or later, before connecting to
your camera using the USB cable.
Follow these steps:
1
2
Locate the USB cable that came with the camera.
Plug the connector on the USB cable into the USB port
on your computer, or into a port on a USB hub.
4
Turn on your computer, then turn on the camera and
turn the camera dial to
.
Installing Your Windows USB Driver
If you’re connecting to a Windows 98 or Windows 2000
system with a USB port, complete the steps starting on
page 9-2 to install your software. The first time you connect
the camera to your computer with your USB cable, you’ll see
the Add New Hardware Wizard (Windows 98) or the Found
New Hardware Wizard (Windows 2000).
NOTE
Although you can use a USB hub, it’s recommended that you
connect the camera directly to the computer’s USB port.
Installing Software and Connecting
9-9
6
7
On the following screen, click Next. The wizard locates
your camera’s driver.
NOTE
◗
You may need your Windows 98 system disk for this
Click Next on the installation screen to install the driver.
installation.
◗
Contact your system administrator if you see an error
message or you aren’t able to install the EPSON PhotoPC
3000Z drivers on your Windows 2000 system.
When you see the following screen in Windows 2000,
click Yes to continue the installation:
Follow these steps to install the driver for your camera:
1
Insert the PhotoPC 3000Z CD-ROM in your
computer’s CD-ROM or DVD drive.
2
3
At the first screen in the New Hardware Wizard, click
Next.
Select Search for the best driver for your device
(Windows 98) or Search for a suitable driver for
your device (Windows 2000). Then click Next.
8
When installation is complete, click Finish.
4
5
Select Specify a location and browse to your
CD-ROM or DVD drive. (Click Next to browse in
Windows 2000.)
NOTE
When your camera is connected to the computer with USB, it can
automatically open applications using USB events. See page
10-14 for more information.
Select the Win98E folder. Click OK.
Installing Software and Connecting
9-10
.
Getting Photos Into Your Computer
10
hen you’re finished taking pictures, you can connect
and Video Clips
W
the camera to your computer and transfer your
photos, sound recordings, and video clips. Then you can use
the files on your Web site, in presentations, or in just about
anything you create on your computer. This chapter
describes the following:
The PhotoPC 3000Z provides several ways to transfer your
files from the camera’s memory card to your computer:
◗ You can save your files in Image Expert albums for easy
viewing and file management. (See page 10-2.)
◗ Transferring photos, sound files, and video clips
◗ You can use EPSON Auto Downloader to automatically
download all your files to a folder on the desktop. (See
page 10-6.)
◗ Configuring camera events
NOTE
If your computer has a Type II PCMCIA card slot, you can transfer
your pictures by copying them directly from your memory card
with an optional adapter. See page B-7 for instructions.
◗ You can import photos into programs that support
TWAIN with the EPSON Photo!3 TWAIN software.
(See page 10-9.)
A
B
Getting Photos Into Your Computer
10-1
◗ You can use EPSON Photo!3 to transfer files to the
computer in different formats for programs that don’t
recognize JPEG or Tiff files. (See page 10-10.)
2
In Windows, click Start, point to Programs, point to
Image Expert, and click Image Expert - PhotoPC
3000Z. If you see the Image Expert Quick Tour screen,
click Close.
NOTE
On a Macintosh, open the Image Expert - PhotoPC
◗
◗
If you have USB, you can save time by using the USB
camera events to automatically open designated programs.
See page 10-14 for more information.
3000Z folder and double-click the Image Expert icon.
You see a window like the following:
Video clips and Tiff files take much longer to transfer than
JPEG files, especially when the camera is connected to the
computer using a serial cable.
click to see
the pictures
in your
camera
Saving Files in Albums With Image Expert
The simplest method of getting photos into your computer is
to use the Image Expert software. This lets you view small
thumbnail images of your pictures, and then quickly transfer
them to an album (folder) on your hard disk drive.
3
Click View Pictures in the Camera. You see a
Follow these steps:
window displaying “filmstrips” of the images on your
camera’s memory card.
1
Make sure the camera is turned on, connected to your
computer, and the camera dial is turned to
.
If you see an error message instead, see page 10-4.
Getting Photos Into Your Computer
10-2
In the top left corner of each image preview, you see an
icon that shows the file type. The icon appears on
video clip files (QuickTime Movie format) and the
icon appears on photos (JPEG or Tiff format). If you
recorded audio for a photo, the icon appears.
NOTE
◗
To select more than one image, hold down the Ctrl key
in Windows or the Shift key on your Macintosh while
you click.
◗
◗
To deselect an image or images, click another image.
4
Click the
button to transfer all the images to your
You must click the
button to transfer images. When
hard drive. To transfer a single image, select it, then click
the button.
you view images on your computer, they are not yet
transferred.
click to start transferring your photos
You see a Select Album window like the following:
Windows
Macintosh
Getting Photos Into Your Computer
10-3
Image Expert automatically creates an album (folder) for
your photos with the current date as its name. You can
type your own name for the album if you want, or
choose an existing album.
8
9
You see a confirmation message asking if you want to
delete all the photos you transferred from your camera’s
memory card.
Click Yes to erase the image(s), or No to save the
images. Click Cancel if you want to keep the camera
filmstrip window open.
5
6
Click Open (or OK on a Macintosh) to begin
transferring your photos. You see a confirmation message
asking if you want to download selected images only.
From your new album, you can double-click a photo or
video clip to open it in Image Expert. You can display your
images one by one, edit, print, and copy them to diskettes, or
place them in your documents and presentations.
Click Selected to download the selected images, or All
to download all images. A window like the following
shows you the progress of each image:
See your electronic Image Expert 1.8 User’s Guide for
information about working with images and using albums in
Image Expert. (To open this file, see page 9-5.)
What To Do if You See an Error Message
When you click the button to view images in the camera’s
memory card, you may see a message like the following:
click if you want to stop
transferring images
7
When you’re finished, close the camera filmstrip
window.
Getting Photos Into Your Computer
10-4
Follow these tips to get your camera connected correctly:
6
Select another port if necessary. In most cases, it’s best to
leave the Port setting at Auto because Image Expert can
detect the camera connection automatically.
1
Make sure the camera is turned on and has not shut off
automatically. If it has, press the POWER button to
turn the camera back on.
If you have a serial device connected to one port and an
internal modem on the other, you can try setting the
Port to COM3 or COM4.
2
Check the cable and make sure the connections are
secure. Make sure the pins inside the connector are not
bent.
If you have a USB port, select Serial/USB, then remove
the USB cable from your computer and reconnect it.
3
4
Make sure your batteries have enough power, or your
AC adapter is connected.
7
8
Select a slower speed. Image Expert automatically
chooses the fastest speed that works with your system,
but this may actually be too fast for the configuration of
your port. Try setting the speed to 57600. You may need
to experiment to choose the best speed.
Click Retry. If you see the Connection Failed message
again, click Connection. You see the following dialog
box:
When you are finished, click OK.
5
Select another image source from the Connection Via
list, if necessary. If you’re using a PCMCIA adapter to
access images from a PC card slot, select PC Card.
Getting Photos Into Your Computer
10-5
You see the EPSON Auto Downloader screen:
Downloading Files Automatically With
Auto Downloader
If you want to quickly download all your images into a folder
on your desktop, you can use EPSON Auto Downloader.
Make sure the camera is turned on, connected to your
computer, and the camera dial is turned to . Then, follow
these steps:
1
In Windows, click Start, point to Programs, EPSON
From the Auto Downloader screen, you can do the
following:
Photo!3, then click EPSON Auto Downloader.
On a Macintosh, double-click the EPSON Auto
Downloader icon in the EPSON Photo!3 folder on
your hard drive.
◗ To see detailed information about Auto
Downloader settings, click the Show Details
button.
On a USB system, press the camera’s shutter button.
◗ To change Auto Downloader settings, click the
Settings button and make any desired changes.
(See the next section for details.)
◗ To select a different folder, click the
button. (By
default, Auto Downloader automatically creates a
new folder named for the current date within the
EPSON Photos folder on the desktop.)
Getting Photos Into Your Computer
10-6
2
3
Click the Start button to begin transferring all your files.
Auto Downloader shows a preview of the current file and
file information as it’s downloading. (If an error message
appears, see page 10-13.)
You see the EPSON Auto Downloader Settings screen:
To stop transferring files before Auto Downloader is
finished, click Stop. The files that have already
transferred are saved in the folder.
When you are done transferring files, you see a message
asking if you want to delete the files you have transferred.
Click Yes to delete the files from your camera’s memory
card, or click No to keep the files on your card.
Setting Up Auto Downloader
2
3
From the Files and Folders tab, set up a new default
destination and file name type by changing the
Destination settings. You can also select whether you
want to create a folder for each time you download, for
each day, or for each month.
Follow these steps to change the Auto Downloader settings:
1
In Windows, click Start, point to Programs, EPSON
Photo!3, then click EPSON Auto Downloader
Settings.
To select which types of files you want to download and
to prevent Auto Downloader from saving duplicates of
files you have already transferred, click the Files and
Folders tab and change the Download settings.
On a Macintosh, double-click the EPSON Auto
Downloader Settings icon in the EPSON Photo!3
folder on your hard drive.
On a USB system, press the camera’s timer button.
Getting Photos Into Your Computer
10-7
4
Click the Advanced tab to change advanced settings.
6
Select any settings for events that occur after you are
finished downloading:
◗ Click Delete Files from the Camera to
automatically delete files from your camera’s
memory card once you have downloaded them. You
can also confirm deletion of files and delete locked
files.
◗ Click Close when Finished to automatically
close the program when all the files are transferred.
◗ To automatically open the folder with your new
files, select Open Destination Folders.
5
Check Start Downloading When Launched to set
the Auto Downloader to start downloading files as soon
as it is launched. (With USB, this allows you to perform
one-step downloading by simply pressing the shutter
button when the camera is connected to your computer.)
◗ To view a log of the download when you finish
transferring images, check View Log.
◗ To start a program when you’re done downloading,
check Start Application. Then click Browse to
find your application. Highlight the program name
and click Open.
You can also set delay settings and automatically
minimize Auto Downloader during an automatic
download.
7
If you want to reset the Auto Downloader to its original
settings, click the Default button.
Getting Photos Into Your Computer
10-8
8
Click OK to save your settings and close the Auto
Downloader Settings window. (Click Cancel if you
want to keep your previous settings.)
3
4
For your TWAIN source, choose EPSON Photo!3
(Windows), or Photo!3 (Macintosh).
For Windows, choose Import, then TWAIN_32 from
the File menu. For Macintosh, select Import, then
TWAIN_Acquire.
Getting Images Into TWAIN-Compliant
Applications
If you use Photoshop or other TWAIN-compliant
applications, you can transfer your still photos directly into
your program from the camera. (You can’t use TWAIN to
open video clips or sounds.) Follow these steps:
The EPSON Photo!3 screen appears, with thumbnail
images of your photos. (If you see the message The
Camera Is Not Responding, see page 10-13.)
click to transfer your picture(s)
1
2
Start your application.
Choose Import, then Select TWAIN_32 Source if
you’re running Windows (or Import, then TWAIN
Select if you have a Macintosh) from the File menu.
NOTE
The commands you choose from the File menu differ from
one host application to another. With other host applications,
you might choose Acquire or Select Source. Some
applications let you download only one photo at a time.
Getting Photos Into Your Computer
10-9
5
Select the picture you want and click Get Photos to
transfer the picture. Or click Select All and then Get
Photos to transfer all the pictures.
feature makes the transfer take significantly longer.
The optional AC adapter is recommended for this
feature.)
NOTE
6
7
After transferring, click Erase Photos if you want to
remove the picture(s) from your camera.
To select more than one image, hold down the Ctrl key in
Windows or the Shift key on your Macintosh while you click.
To deselect, click another image.
If necessary, click Close to exit the EPSON Photo!3
screen and return to your application. You see the picture
or pictures in the work area.
You can also select a picture and do the following before
you transfer it:
Getting Images That You Can Import
Most methods of transferring images from the camera save
your pictures as JPEG or Tiff files. If your word processor or
other application doesn’t support the JPEG or Tiff format,
you have to convert the files one by one in an image editing
program. Or you can use the export feature of EPSON
Photo!3 to automatically convert the files as you transfer
them.
◗ Click View Photo to see a full-size image.
◗ Click one of the rotation buttons to turn the picture
90 degrees.
◗ Click Photo Info to see the capture time and date,
image resolution, and other information.
◗ Check PhotoEnhance to automatically improve
the picture during transfer. (You can select and
enhance all the pictures at once. However, this
NOTE
You can’t export video clips or sounds with EPSON Photo!3.
Getting Photos Into Your Computer
10-10
Follow these steps to export and convert your pictures with
EPSON Photo!3:
If you see a Setup screen that says The Camera Is Not
Responding, see page 10-13.
1
Start your EPSON Photo!3 software:
2
Click the picture you want, or click Select All.
You can also view, rotate, or enhance the picture(s) or
see picture information before you export, as described
on page 10-10.
In Windows, click Start, point to Programs, EPSON
Photo!3, then click EPSON Photo!3.
On a Macintosh, double-click the EPSON Photo!3
(If you see video clips instead of pictures, change the
icon in the EPSON Photo!3 folder.
camera directory from Video Clips to EPSON.)
On a USB system, press the camera’s flash button.
You see a screen like the one below.
click to transfer and convert picture(s)
Getting Photos Into Your Computer
10-11
3
Click the Export Photos button. The Save As dialog
box appears (this box looks slightly different in
Windows, but has the same options):
NOTE
You cannot open exported photos in EPSON Photo!3. Use
Image Expert to view and edit the exported images.
click to choose a different folder
7
Click Erase Photos if you want to delete the pictures in
your camera’s memory card.
click if you
want to
Here are some additional things you can do with
EPSON Photo!3:
create a
new folder
◗ Select the Controls tab to change camera settings
or view a live preview and take pictures from your
computer. See Chapter 13 for more information.
click to
transfer
and
“export”
photos
◗ Set the camera’s date and time from the Setup tab,
or change your computer connection settings. See
Chapter 13 for more information.
type a name for your
photo(s)
click to choose
the file type
4
5
Type a file name. If you’re exporting more than one
image, the software will add numbers to identify each.
◗ Select the Folder tab and click Browse to locate
and display pictures you have downloaded. You can
then select a picture and click Upload to transfer a
picture from your computer to the camera or an
optional memory card. See Chapter 14 for more
information.
Select the file type from the drop-down menu. You can
choose any of these formats: PICT (Macintosh only),
JPEG, Bitmap (BMP), PCX.
6
Click Save. Your pictures are transferred one by one.
Getting Photos Into Your Computer
10-12
8
Click Close to exit EPSON Photo!3.
From EPSON Auto Downloader, you may see a screen like
the following:
You can now insert your exported pictures in documents and
other projects. For instructions, see page 11-2.
Responding
When you try to acquire pictures from the camera or start
the EPSON Photo!3 application, you may see a screen like
the following:
Follow these steps to fix your camera connection:
1
Check the cable and make sure the connections are
secure. Make sure the pins inside the connector are not
bent.
2
3
Make sure your batteries have enough power, or your AC
adapter is connected.
Click Test Connection. If you see the same screen,
continue with step 5.
Getting Photos Into Your Computer
10-13
4
Select another port if necessary. In most cases, it’s best to
leave the Port setting at Auto because EPSON Photo!3
and EPSON Auto Downloader can detect the camera
connection automatically.
Configuring Camera Events
You can use camera events when you are connecting your
camera to your computer with USB. You can automatically
launch an application, such as EPSON Auto Downloader,
when you connect the camera and press one of its buttons.
You can customize which buttons launch which programs in
the Camera Event Monitor on your Macintosh or the
Camera Events Control Panel in Windows 98 or
Windows 2000.
If you have a serial device connected to one port and an
internal modem on the other, you can try COM3 or
COM4.
If you’re using a USB port, try selecting USB, then
remove the USB cable from your computer and
reconnect it.
default event settings:
5
6
Select a slower speed. EPSON Photo!3 and EPSON
Auto Downloader automatically choose the fastest speed
that works with your system. This may actually be too
fast for the configuration of your port. Try setting the
speed to 57600. You may need to experiment to choose
the best speed.
◗ The shutter button launches EPSON Auto Downloader.
◗ The timer button opens the EPSON Auto
Downloader Settings window.
◗ The flash button launches EPSON Photo!3.
Click Test Connection again. If you still don’t see your
pictures, see Appendix A for more troubleshooting tips.
◗ The image quality button starts the EPSON Photo!
Print2 Launcher.
◗ Connecting the camera doesn’t launch anything by
default, but can be set to launch an application.
Getting Photos Into Your Computer
10-14
Configuring Camera Events in Windows
Follow these steps to configure camera events for specific
applications in Windows 98 and Windows 2000:
1
Click Start, point to Settings, then click Control
click to
select a
camera
event
Panel.
2
3
4
5
6
Double-click the Scanners and Cameras icon. You
see the Scanners and Cameras Properties window.
check an
application
to open
with the
camera
event
Highlight EPSON PhotoPC 3000Z and click
Properties.
Click the Events tab. You see the Camera Events
window, as shown to the right.
Select the event you want to change from the Camera
events drop-down menu.
NOTE
If you have more than one application selected for any camera
event, you will see a camera event screen when you press the
relevant button on the camera. The screen asks you to choose
which application you want to use to open your image. When you
see this screen, select an application from the list and click OK.
You see a list of events with the registered applications
that support that event. To change an application,
uncheck the current application and check a different
one.
Now when you connect your camera or press any of the
camera buttons that you have assigned, your selected
application opens automatically.
Getting Photos Into Your Computer
10-15
2
Make sure Enable Camera Event Monitoring is
checked. (Uncheck this option if you don’t want to use
camera events.)
Configuring Camera Events in Macintosh
You can configure camera events on your Macintosh using
the Camera Event Monitor.
3
4
Select an event from the list.
Follow these steps to change the default event settings:
If you don’t want to launch any application with a
camera event, click Ignore the Camera Event.
1
In the Apple menu, click Camera Event Monitor
Options. You see the EPSON Camera Monitor Setup
window:
5
6
7
To launch an application with an event, click Launch
an Application.
click to select a
camera event
Click Browse to find your application. Select your
application and click Open.
Click OK to save your settings and close the EPSON
Camera Monitor Setup window.
Now when you connect your camera or press any of the
camera buttons that you have assigned, your selected
application opens automatically.
click to launch an application
with the camera event
click to select an
application
Getting Photos Into Your Computer
10-16
.
Getting Your Photos Into Documents
11
hotoPC 3000Z provides several methods for getting
P
your pictures into presentations, letters, web pages, and
other projects. You can drag and drop a picture from an
Image Expert album into a document or presentation. You
can also import an image into your application, or copy and
paste it. With Windows, you can use the Camio™ Viewer to
drag a picture directly from the camera and drop it into your
project. This chapter describes the following:
◗ Importing images into documents
◗ Getting images with copy and paste
◗ Using drag and drop from an album
◗ Getting images with the Camio Viewer
A
B
Getting Your Photos Into Documents
11-1
Importing Images Into Documents
NOTE
In some applications, you can add a frame around the picture
if you want to move it or resize it. In other applications, you
create a frame first and then place the picture in it. For
instructions, see your application’s help system or
documentation.
Once your pictures are transferred and saved on your hard
drive, you can import them into your applications. You may
need to convert your images if you didn’t export them from
the camera (as explained in Chapter 10) and your application
can’t import JPEG or Tiff files. Or you can use the Save As
4
Select Picture from the Insert menu. (In some
applications you may need to select a different
command, such as Import Picture, which is usually in
the File menu.)
NOTE
Your picture may display poor image quality on the screen after
you import it. However, in most cases it will print correctly.
An Insert Picture dialog box appears (your dialog box
may look different, depending on your application):
Follow these steps to import a PhotoPC 3000Z picture into
your document:
1
2
3
Start your application.
Open the document where you want to use the picture.
Select the point where you want to place your picture.
Getting Your Photos Into Documents
11-2
5
6
Locate and select the image you want to insert. In some
applications you can see a preview of your picture.
NOTE
Before you import pictures with your Web design and
◗
management application, resize your images to a smaller
size, such as 640 × 480 pixels. Large photos cause pages to
load slowly. You might try creating a small, preview image
with a link to the full-sized photo. See your application’s
documentation for instructions. Read your electronic Image
Expert User’s Guide to resize images in Image Expert
(see page 9-5).
Click OK (or Insert, Import, or whatever command
your application uses) to insert your picture.
The picture appears in your document.
◗
You may not be able to import video clips into some
applications. Not all applications recognize the camera’s
movie file format. If you upgrade your QuickTime Player to
QuickTime Pro, you can use that program to save your file in
a format that your application recognizes.Go to http://
www.apple.com/quicktime/ on the Internet for details.
Getting Your Photos Into Documents
11-3
You see a dialog box like the following:
Getting Images With Copy and Paste
You can use this method to place a picture in just about any
type of document or project. You should already have
transferred your picture from the camera to your hard disk.
Follow these steps:
1
In Windows, click Start, point to Programs, point to
Image Expert, and click Image Expert - PhotoPC
3000Z. If you see the Image Expert Quick Tour screen,
click Close.
On a Macintosh, open the Image Expert -
PhotoPC3000Z folder and double-click the Image
Expert icon.
3
Locate the album you want and double-click it to open
it. When a filmstrip of album images appears in the
Image Expert window, click the picture you want to
copy.
2
Click View Pictures from an Existing Album. Or,
from the Image Expert screen, click the Open Album
button
or select Open Album from the File menu.
4
5
Click the Copy button or select Copy from the Image
Expert Edit menu.
Start your application.
Getting Your Photos Into Documents
11-4
6
7
Open the document where you want to use the picture.
2
Click View Pictures from an Existing Album, or
click the Open Album button
screen.
from the Image Expert
Choose Paste (or Paste Special) from your
application’s Edit menu. A copy of the picture appears
in your document.
3
4
Locate the album you want and double-click it to
open it.
Using Drag and Drop From an Album
(Windows Only)
Start your word processor or other application and
open the document where you want to use the picture.
You should have both the Image Expert album and the
document displayed on your screen, as shown:
Once you have transferred your photos into albums, you can
easily drag and drop them into documents or other projects.
NOTE
Dragging and dropping an image into a document works only with
OLE-2.0-compliant applications, such as Microsoft Word,
PowerPoint, WordPerfect, or Lotus SmartSuite. Depending
on how well your application supports OLE 2.0, your images may
not look as good when you drag and drop them as when you
import them.
Follow these steps:
1
Start Image Expert as described on page 11-4.
Getting Your Photos Into Documents
11-5
5
6
Click the image you want.
NOTE
Dragging and dropping an image with the Camio Viewer works
only with OLE-2.0-compliant applications running in Windows.
While holding down the mouse button, drag the image
to the location where you want it in your document.
7
Release the mouse button. The picture appears in your
project or document.
First you need to connect the camera to your computer as
described in Chapter 9. Then follow these steps:
If you want to edit or modify the picture, just double-click it
on the Image Expert window to bring up the Image Expert
menus and toolbar.
1
Double-click the camera icon
your Windows taskbar.
on the right end of
You see the Camio Viewer Startup Options dialog box:
Getting Images With the Camio
Viewer (Windows)
The Camio Viewer, a component of Image Expert, is a quick
and easy way to get pictures from the camera. You can
transfer all images to your computer, or just display the
pictures in the camera. Then you can drag a picture directly
into a presentation or document.
Getting Your Photos Into Documents
11-6
2
Choose one of the following options:
Dragging and Dropping a Picture Into
a Document
Follow these steps if you chose View images in the
◗ View images in the Camera
Displays a filmstrip of your pictures. You can then
select an image to drag and drop into a document or
presentation. (The image is embedded in your
document, and is not available as a separate file.)
Camera:
1
Click OK. Your pictures appear in a strip of thumbnail
images:
◗ Copy all images from the Camera to
the Computer
Transfers your pictures to an album (folder) on your
hard drive. You can then select an image to drag and
drop.
◗ Copy all images and delete them from
the Camera
Transfers your pictures to an album (folder) on your
hard drive and deletes them from the camera. You
can then select an image to drag and drop.
2
Open the application and document where you want to
use the picture.
3
Continue with the steps in one of the following sections,
depending on the option you chose in step 2. (If you see
an error message, see page A-9 for possible solutions.)
Getting Your Photos Into Documents
11-7
3
Click the picture you want to use. Without releasing the
mouse button, drag the picture to your document.
When your pointer is over the location where you want
the picture to appear, release the mouse button. The
picture is downloaded to your document from the
camera.
Transferring Images Before Placing Them
Follow these steps if you chose Copy all images from the
Camera to the Computer or Copy all images and
delete them from the Camera:
1
Click OK to copy your pictures to an album named with
the current date. Or, type a new name for the album and
click OK. Your pictures are transferred one by one. They
appear in a strip of thumbnail images, as shown on the
previous page.
If you want to edit or modify the picture, just double-
click it in the Camio Viewer filmstrip to bring up the
Image Expert menus and toolbar. For more information
about the Camio Viewer, choose Quick Tour from the
Image Expert Help menu.
2
Follow steps 2 and 3 in the previous section to drag and
drop a picture into a document or other project.
NOTE
When you drag and drop with the Camio Viewer, your picture is
not saved as a separate image file on your hard drive. You have to
transfer your image first if you want it to be available as a
separate image file.
Getting Your Photos Into Documents
11-8
.
Printing Your Photos
12
hotoPC 3000Z provides Photo! Print2 so you can
quickly download and print your images. You can use
P
Photo! Print2 to print an index of all the pictures in your
camera. You can also print several copies of your photos with
different layouts and print settings.
This chapter includes the following information:
◗ Opening photos in the camera’s memory card
◗ Opening photos saved on the computer
◗ Printing photos
A
B
Printing Your Photos
12-1
On a Macintosh, double-click the EPSON Photo!
Opening Photos in the Camera’s
Memory Card
Print2 Launcher icon in the EPSON Photo!3 folder.
You can use the EPSON Photo! Print2 Launcher to open the
photos from your camera’s memory card for printing
without saving them on your computer.
For USB systems, press the image quality button on
your camera.
You see the Photo! Print2 Launcher window.
CAUTION
When you use Photo! Print2 Launcher to open your files in
Photo! Print2, your files are not permanently stored on the
computer. Before you delete photos from the camera’s memory
card, make sure to transfer them as described in Chapter 10.
The Launcher shows previews of your photos as it
transfers the images to Photo! Print2.
Follow these steps to open your photos in Photo! Print2 with
the Photo! Print2 Launcher:
1
Connect the camera to your computer, turn the camera
dial to and turn on the camera by pressing the
NOTE
If you see an error message, check for possible solutions on
page A-9.
POWER button.
2
In Windows, click Start, point to Programs, EPSON
Photo!3, then click EPSON Photo! Print2
Launcher.
Printing Your Photos
12-2
When the Launcher is finished downloading, you see the
images in the Photo! Print2 Index window:
Opening Photos Saved on the
Computer
With Photo! Print2, you can print out photos that you have
downloaded to a folder on your computer. You can print an
index of the photos in that folder, or you can select photos
and a layout for printing.
1
2
In Windows, click Start, point to Programs, EPSON
Photo! Print2, then click EPSON Photo! Print2.
Print2 icon in the EPSON Photo! Print2 folder.
Click Start. Then click Browse for Folder.
To print the photos you have just opened in Photo! Print2,
See “Printing Photos” on page 12-4.
Printing Your Photos
12-3
3
Select your folder and click OK. Your images open in
Printing Photos
the Photo! Print2 Index window:
After opening your photos in the Photo! Print2 Index
window, as described in the sections above, follow these steps
to print them:
1
To print an index of all your photos, click Yes. Click
the button with the correct paper size. Make sure the
prints the index sheets.
To skip the index, click No.
2
In the next window, click Select All if you want to
print one copy of each of your photos. Then go to
step 6.
Follow the steps under “Printing Photos,” below, to print the
Or, if you want to select which photos and how many of
each to print, click Specify Number of Prints and go
to step 3.
photos you have just opened in Photo! Print2.
Printing Your Photos
12-4
3
You see the Select photos to print window. Click a
photo to select the number of prints. The selected photo
opens in a window like the following:
You see the paper size and layout window:
4
5
Click the up arrow to increase or the down arrow to
decrease the number of copies for that photo. You see a
green circle and the number of copies on each selected
image.
6
Select the size of paper that is loaded in your printer.
Then click the button for your print layout. (You can
print up to eight photos per page on some paper sizes.)
When you are finished selecting photos, click Finish
Selection.
Printing Your Photos
12-5
You see the print confirmation window:
TIP:
Here are image size guidelines to follow when printing photos:
◗ Print images captured at 640 × 480 pixels as small prints
(4 × 6 inches, or smaller).
◗ Print images captured at 2048 × 1536 pixels as larger prints
(8 × 10 or 11 × 14 inches).
◗ Print images captured at 2544 × 1904 pixels as the largest
prints (12 × 17 inches).
◗
Larger images still look good when printed at smaller sizes.
7
Click Printer Settings to adjust your printer’s settings
(including the media type and size).
From the Print Setup screen, select your printer from
the list and click Properties. Make your changes, then
click OK. Click OK to return to the printing menu.
8
9
Click Print Options to set up trimming, date printing,
cutting guides, and other print option settings. When
you’re finished, click Finish Setting.
Click Start Printing to print your photos.
Printing Your Photos
12-6
.
Operating the Camera From Your
Computer
13
hen the camera is connected to your computer,
Taking Pictures From Your Computer
With Image Expert
When you connect the camera and take pictures from your
computer, you see a live preview of each shot before you
capture it. You can control camera settings from your
computer, and even set the shutter speed.
Wyou can take pictures with a live preview on your
computer screen to help you frame each shot. You can also
set the camera’s clock and adjust a number of other settings
from your computer.
This chapter covers the following:
◗ Taking pictures from your computer with Image Expert
◗ Taking pictures with EPSON Photo!3
◗ Adjusting camera settings from your computer
NOTE
If you have the optional AC adapter, you can save on batteries by
using it when you connect the camera to your computer. The
AC adapter should be available where you bought your
PhotoPC 3000Z, or you can order it from EPSON Accessories.
See page B-2 for more information.
NOTE
A
B
You can use either Image Expert or EPSON Photo!3 to take
pictures from your computer, adjust camera settings, and transfer
images. PhotoPC 3000Z allows you to choose the application that
best meets your needs and preferences.
Operating the Camera From Your Computer
13-1
Follow these steps to take pictures from your computer:
You see a dialog box like the following:
1
2
Connect the camera to your computer as described in
Chapter 9.
click to
capture the
image you
see
Position the camera facing the subject. Using a tripod
will give you the most control when setting up your
shots. See page B-4 for instructions.
3
4
Turn on your computer, press the POWER button to
click to erase
images in the
camera
turn on the camera, then turn the camera dial to
.
In Windows, click Start, point to Programs, point to
Image Expert, and click Image Expert - PhotoPC
3000Z. If you see the Image Expert Quick Tour screen,
click Close.
NOTE
If you see an error message, check for possible solutions on
page A-9.
On a Macintosh, open the Image Expert - PhotoPC
6
Click Continuous Update to activate the live preview
feature. The image you see is updated every 8 to 10
seconds, depending on your connection speed. You may
need to move the camera or your subject until you see
the image you want to capture.
3000Z folder and double-click the Image Expert icon.
5
Click the Camera Controls button
or choose
Controls from the Camera menu.
Operating the Camera From Your Computer
13-2
You can click the Flash and Resolution buttons on the
screen to adjust these settings just as you would by using
the buttons on the camera. For more information about
the flash and resolution (image quality) settings, see
Chapter 2.
Using the Self Timer
You can use this feature to have your computer take a picture
automatically, after a delay period that you can set. This
allows you to take self-portraits and other specialized shots.
Follow these steps:
NOTE
1
Click Self Timer. You see the following dialog box:
When the camera is connected to your computer, you can’t
use any of the control buttons or the shutter button on the
camera. You can operate these features only through your
computer.
7
8
When your shot is ready, click Take Picture. The
2
3
Enter a number for the delay period you want to use.
You can set up to a 120-second delay.
image is captured and processed.
Click Close when you’re finished taking pictures from
Click Start/Stop to start the countdown and take the
picture. The red timer light on the camera remains on
for the delay period you entered. Then the light flashes
rapidly for 2 seconds and the shutter is released.
your computer.
NOTE
The live preview feature quickly drains your batteries. Make sure
you turn it off as soon as you’re finished, or use the optional
AC adapter.
The camera clicks and processes your picture.
Operating the Camera From Your Computer
13-3
4
Click the Controls tab. You see a dialog box like the
Taking Pictures With EPSON Photo!3
You can use your EPSON Photo!3 application to take
following:
pictures from your computer.
1
Connect the camera to your computer as described in
Chapter 9 and position the camera facing the subject.
NOTE
Using a tripod will give you more control when setting up
your shots. (See page B-4 for instructions on using a tripod.)
2
3
Turn on both your camera and your computer. Make
sure the camera dial is set to
.
Start your EPSON Photo!3 software:
NOTE
If you see an error message, check for possible solutions on
page A-9.
In Windows, click Start, point to Programs, EPSON
Photo!3, then click EPSON Photo!3.
On a Macintosh, double-click the EPSON Photo!3
5
Click Start to display the live preview.
icon in the EPSON Photo!3 folder.
On a USB system, press the camera’s flash button.
Operating the Camera From Your Computer
13-4
You can use the Quality, Flash, Self Timer, and
Monochrome controls on the screen to adjust these
settings just as you would by using the buttons or LCD
menus on the camera.
Adjusting Camera Settings From
Your Computer
You can use either Image Expert or EPSON Photo!3 to
change the following camera settings:
6
7
When your shot is ready, click Take a Picture. The
◗ Time
image is captured and processed.
◗ Date
Click Close when you’re finished taking pictures from
◗ Camera Description (ID)
◗ Connection Port
◗ Connection Speed
your computer.
The Auto-Stop Timer shuts off the live preview after one
minute to save battery power. You can set the timer from
30 seconds to 5 minutes.
Changing Settings With Image Expert
You can change settings in Image Expert while you’re
viewing pictures in the camera. Follow these steps:
NOTE
If you have an external flash unit attached and have changed the
flash setting to Ext Flash, you can’t change the flash mode. To
change the setting back so you can use the camera’s built-in
flash, see page B-5.
1
Connect the camera to your computer as described in
Chapter 9.
2
Turn the camera dial to , then turn on your camera
and your computer system.
Operating the Camera From Your Computer
13-5
3
Start Image Expert, then select Properties from the
◗ Type in the Camera Time box to change the time
and date. Or, click Set Camera to Computer
Time to automatically synchronize your camera to
your computer.
Camera menu. The Camera Properties menu appears:
4
5
Click OK to save your settings and exit the Camera
Properties dialog box.
If you want to adjust your port settings, select
Connection from the Camera menu. You see the
Connection dialog box:
NOTE
If you see an error message, check for possible solutions on
page A-9.
◗ Enter a new Description of the camera to change
the default. This might be useful if you have more
than one camera and you want to record its
description in your picture data.
◗ Select another port if you want to change your
connection. In most cases, it’s best to leave the Port
setting at Auto because Image Expert can detect the
camera connection automatically.
Operating the Camera From Your Computer
13-6
◗ If necessary, select a new source. The standard
selection is Serial/USB. If you’re using a PCMCIA
adapter to access a PC card slot, select PC Card in
the Connect Via drop-down list. (FlashPath is
not implemented on the PhotoPC 3000Z.)
2
3
Turn the camera dial to , then turn on your camera
and your computer system.
Start EPSON Photo!3, then click the Setup tab to
display the following dialog box:
◗ Select a different communication speed. Image
Expert automatically chooses the fastest speed that
works with your system. This may actually be too
fast for the configuration of your port. You may
need to experiment to choose the best speed. (See
your Windows documentation or help system to
change the port speed for your computer.)
6
Click OK to save your settings and exit the Connection
dialog box.
Changing Settings With EPSON Photo!3
You can also change settings in EPSON Photo!3 while you’re
viewing pictures in the camera. Follow these steps:
NOTE
If you see an error message, check for possible solutions on
page A-9.
1
Connect the camera to your computer as described in
Chapter 9.
Operating the Camera From Your Computer
13-7
4
Change any of the following Computer Connection
You see a dialog box like the following:
settings:
◗ Select another port if you want to change your
connection. In most cases, it’s best to leave the Port
setting at Auto because EPSON Photo!3 can detect
the camera connection automatically.
Enter new values for the settings, or click Copy from
Computer to have your camera automatically
synchronized to your computer. Click OK to return to
the Setup dialog box.
◗ Select a different communication speed. EPSON
Photo!3 automatically chooses the fastest speed that
works with your system. This may actually be too
fast for the configuration of your port. You may
need to experiment to choose the best speed.
7
Enter a new Camera ID if you want to change the
default. This might be useful if you have more than one
camera and you want to be able to have its ID recorded
in your picture data.
5
6
Click Test Connection to make sure your new settings
work with your system.
Click the Set Time button to change the camera’s time
and date settings.
Operating the Camera From Your Computer
13-8
.
Presenting Your Photos
14
ou can connect your camera to a multimedia projector
Uploading Images to the Camera
Yor television and present not just photos and sounds,
but also text and graphics, and video clips that you’ve
captured with your camera.
The EPSON File Converter software allows you to convert
any image or presentation slide to the EPSON Photo file
format and upload it to your CompactFlash memory card.
You can upload images in their actual sizes or convert them
to 640 × 480 pixels. You upload converted images with
EPSON Photo!3.
The EPSON File Converter lets you transfer still images,
screens, and sounds from your computer to your camera’s
memory card. Then you can play your files on your
television or show them as a presentation on your projector
without printing overhead transparencies or slides, and
without a laptop computer.
NOTE
Images that have been cropped will display white strips in the
areas that have been cropped out.
This chapter explains the following:
A
B
◗ Uploading images to the camera
◗ Converting presentations
◗ Connecting the camera to a video device
Presenting Your Photos
14-1
Converting Files on a Windows PC
Follow these steps to convert your files:
1
Click Start, point to Programs, EPSON File
Converter, then click EPSON File Converter. You
see a screen like the one on the right.
2
Use the Drive and Folder lists to locate the folder
containing the images you want to upload. Double-click
the folder to select it.
The images in the folder are listed in the File Name
box.
NOTE
see this box for helpful information
If you want to upload images from a network drive, you may
need to map the drive before opening the EPSON File
Converter software. See your Windows documentation for
more information.
3
4
Select the format of the images you want to upload from
the Files Type list.
Select the images you want to upload in the File Name
list. Then click the –> button. If you want to upload all
the images in the list at once, click the >> button.
As you select files, they appear in the Selected Files
List in the order they will be uploaded. This determines
the sequence in which you can display the images.
Presenting Your Photos
14-2
◗ To rearrange the uploading (and display) order,
select the image you want to reorder, then click the
↑ or ↓ sort arrow.
◗ If you want to change your selection, click the <–
button to remove selected files or click the <<
button to remove all the files from the Selected
Files List.
◗ If you want to preview a selected image and confirm
its size, click the Preview checkbox.
5
For each file in the Selected Files List, choose an
image size from the Image Size box. The File
Converter resizes your files during the transfer process.
size of previewed
image in pixels
6
If you want to upload an audio recording with a file,
highlight the file name in the Selected Files List and click
the Select Sound button.
From the Open dialog box, select your sound file and
click Open. If you want, click the Play Sound button
to play the sound or the Delete Sound button to
remove it.
Presenting Your Photos
14-3
7
Click the Start button. You see a window like the
following:
Converting Files on a Macintosh
Follow these steps to convert your files:
1
Double-click the EPSON File Converter icon in the
EPSON File Converter folder. The EPSON File
Converter dialog box opens, as shown on the next page.
2
Click Add. The Select Files dialog box appears.
8
Select a folder where you want to save your converted
files, then click OK. Your files are converted and saved in
the selected folder.
3
4
Double-click the folder containing the images you want
to upload, then select each file you want to upload and
click Select.
To upload your converted files to the camera, see
“Uploading Converted Files” on page 14-6.
If you want to preview a selected image and confirm its
size, click the Preview checkbox. It takes a few seconds
longer to select images with previews displayed.
When you finish selecting image files, click Done to
close the Select Files dialog box.
Presenting Your Photos
14-4
The selected images appear in the Selected File List in
the order they will be uploaded. This determines the
sequence in which you can display the images.
5
6
For each file in the Selected File List, select an image
size from the Image Size box. The File Uploader will
resize your files during the transfer process.
If you want to upload an audio recording with a file,
highlight the file name in the Selected Files List and click
Select Sound. Find the folder where your sound file is
located and select the sound you want to associate with
your file. Then click Open. If you want, click Play
Sound to play the sound or click Delete Sound to
remove it.
7
Click Upload. Select the folder where you want to save
your converted files and then click Open. A window
opens to show you the progress of the file conversion.
To upload your converted files to the camera, see the
next section, “Uploading Converted Files.”
check here for helpful information
◗ To rearrange the uploading order, select the image
you want to reorder, then click Up or Down.
◗ To remove files from this list, select the file(s) and
click Remove.
Presenting Your Photos
14-5
EPSON Photo!3 opens. Click the Folder tab to display
Uploading Converted Files
the images you selected:
After you have converted your files as described in the
sections above, you can upload them to your camera.
NOTE
If your camera’s CompactFlash memory card can’t hold all the
images you’d like to upload, you can purchase a higher density
card (up to 192MB). See Appendix B for details.
Before you start, make sure the camera is connected to your
computer, the computer and camera are turned on, and the
camera dial is turned to . Then follow these steps to
upload the files:
NOTE
1
Start your EPSON Photo!3 software:
If you see an error message, check for possible solutions on
page A-9.
In Windows, click Start, point to Programs, EPSON
Photo!3, then click EPSON Photo!3.
2
Click Select All to select all the images, or select
individual images by clicking the thumbnails in the
image selection window.
On a Macintosh, double-click the EPSON Photo!3
icon in the EPSON Photo!3 folder.
On a USB system, press the camera’s flash button.
Presenting Your Photos
14-6
3
Click Upload/Copy. The Upload/Copy Photos dialog
box appears:
Converting Presentations
If you want to upload a presentation or document that is not
saved as a standard image file, you can make a “screen
capture” of your computer desktop with the file open. This
lets you turn any document or presentation into a series of
image files that you can convert and upload to your camera’s
memory card.
Windows users can make screen captures from within the
EPSON File Converter utility; Macintosh users need to use
the standard Macintosh screen capture function.
4
Click Upload into the Camera to upload the images
to your camera’s memory card, click Copy to a
Memory Card in a drive to upload to a memory card
installed in your computer’s PCMCIA drive, or click
Copy to another folder (and select a folder); then
click OK.
Capturing Windows Screens
Follow these steps:
1
Click Start, point to Programs, EPSON File
Converter, then click EPSON File Converter.
You see the EPSON File Converter window.
The images are uploaded to the destination you selected.
Presenting Your Photos
14-7
2
Click the Screen Capture tab. The Screen Capture
dialog box appears:
4
5
Specify the key combination you want to use for screen
captures in the Hot Key setting box. Click the ALT,
CTRL, or SHIFT checkbox, then select a function key
from the hot key list. The default hot key is F5.
choose the key combination to use for capturing screens
Click Start to activate the key combination. The key
combination remains active only for the current session.
When the key combination is activated, the Start
button changes to a Stop button.
To deactivate the hot key combination, press the Stop
button.
6
Start your application and open the file to the page or
image you want to capture.
set the drive and folder for saving screen captures
3
Use the Drive and Folder lists to select the folder where
you want to save the screen capture. To create a new
folder for the screen captures, click the New Folder
button.
Presenting Your Photos
14-8
Capturing Macintosh Screens
NOTE
EPSON File Converter for the Macintosh does not have a
screen capture feature. However, you can make screen
captures using your Macintosh system software, then use
EPSON File Converter to convert the screen captures so you
can upload them to your camera.
◗
The entire screen is captured, not just the active
window. Make sure you maximize your presentation
before you capture it. If you set your application to
“slide show” mode (or the equivalent) you can capture
just the image you want, without menus and other
screen elements.
The procedure may differ slightly, depending on your
Macintosh. See your computer manual for more
information.
◗
Presentations using large fonts (at least 18 points) work
best.
7
8
Press the hot key combination you selected. Your screen
capture is assigned a file name and saved to the folder
that you specified.
Follow these steps:
1
Start your application and open the file for the image
you want to capture.
You can make as many screen captures as you’d like;
simply open each file you want to capture and press your
screen capture key combination again.
2
keyboard at the same time. Your Macintosh names and
saves the screen shot on your hard drive (not in a folder).
When you’re finished, close your application and click
the Stop button on the Screen Capture dialog box. The
key combination you selected is erased.
You can make as many screen shots as you’d like; simply
repeat this step.
To convert your screen captures for uploading, follow the
instructions on page 14-2. Then follow the instructions on
page 14-6 to upload the screens to the camera.
Presenting Your Photos
14-9
Connecting the Camera to a Video
Device
You can display your photos, video clips, uploaded images,
and sounds on a multimedia projector, television, VCR, or
other video output device.
NOTE
◗
If you’re running OS 8.0 or later, you can capture just the
active window. Press the J, Shift, and 4 keys at the same
time, then click the window you want to capture (if Caps
Lock is on), or drag the cursor around that portion of the
screen you want to capture.
◗
If you’re running OS 7.5x, the entire desktop is captured, not
just the active window. Make your document window as
large as possible before you capture it. If you set your
application to “slide show” mode (or the equivalent), you
can capture just the image, without other screen elements.
NOTE
The optional AC adapter is highly recommended when
connecting to a video device. See page B-2 for instructions and
ordering information.
You need the video cable that came with your
PhotoPC 3000Z to connect to your video device.
3
When you’re finished, close your application.
To convert your screen shots for uploading, follow the
instructions on page 14-4. Then follow the instructions on
page 14-6 to upload the screens to the camera.
Presenting Your Photos
14-10
Follow these steps:
3
Connect the yellow end of the video cable to the
VIDEO IN port and the white end of the cable to the
AUDIO IN port on the TV, VCR, or projector.
1
Make sure your camera and TV (and VCR) or video
projector are turned off.
2
Open the camera’s connector cover and connect the
black end of the video cable to the AV Out port, as
shown below:
4
5
Turn on the TV (and VCR) or video projector and
switch to video mode.
Turn the camera dial to
.
The last image that you uploaded to the camera is
projected. If you are using the optional AC adapter, you
can also see the image on the LCD screen.
Presenting Your Photos
14-11
You can use the camera’s slide show feature to play your
images and sounds automatically, or play them one at a
time using the navigation buttons. You can use all of the
camera’s other playback features to show your
presentation.
Setting the Broadcast Signal System
If you will be using your camera with a television, you can
make sure the camera has the correct broadcast signal setting.
Follow these steps:
1
Turn the camera dial to
menu.
to display the SETUP
NOTE
If you are powering your camera with batteries, the LCD
screen is blank when the camera is connected to a video
device. The LCD screen remains lit if you use the camera
with the optional AC adapter.
2
Press the button under the
Language/Signal setup menu.
icon to go to the
6
When you’re done playing back pictures, turn your
camera off and turn off the TV (and VCR) or video
projector. Then disconnect the cables.
TIP
3
4
If necessary, press the button next to TV to change the
setting to NTSC (the U.S. broadcasting standard).
You can videotape your pictures, sounds, and videos to share
them without using a computer. After you connect the camera to
a VCR, press the Record button on the VCR and play back a video
clip (see page 6-9) or use the camera’s slide show feature (see
page 6-12).
Press the button under BACK to save the setting and
return to the SETUP menu.
Presenting Your Photos
14-12
.
Troubleshooting and Reference
This section includes troubleshooting and maintenance instructions for your EPSON PhotoPC 3000Z, optional
accessories available for the camera, specifications, and warranty information. This section includes the following
appendices:
A
B
Maintenance and Troubleshooting
Optional Accessories
C
D
Specifications
Regulatory Information and Warranty
There is an Index following this section of the book.
.
Maintenance and Troubleshooting
A
our PhotoPC 3000Z camera is easy to take care of, and
Before you perform any maintenance procedures, be sure to
read the safety instructions in the Introduction. Then follow
these guidelines:
Yany problems you may have are easy to solve. This
chapter includes the following sections:
◗ Caring for the camera and battery charger
◗ Solving camera problems
Handling the Camera
◗ To avoid damaging the optics of the camera, do not
expose the lens to direct sunlight for extended periods of
time.
◗ Solving connection and software problems
◗ Solving picture problems
NOTE
◗ Where to get help
To further protect the lens from bright sunlight, you can
attach an optional UV filter with your camera’s lens adapter.
See Appendix B for instructions.
Caring for the Camera and Battery
Charger
A
B
Your PhotoPC 3000Z requires only basic care.
Maintenance and Troubleshooting
A-1
◗ Make sure you replace the lens cap on the camera when
you are not using it. Remove the lens cap before turning
on the camera.
◗ Don’t use harsh or abrasive cleaners. Don’t use liquid or
aerosol cleaners.
◗ To clean the lens, first blow off any loose dust or dirt.
Then breathe on the lens and wipe off all moisture with
a soft, lint-free cloth or lens cleaning tissue. To avoid
scratching the lens, don’t press too hard.
◗ Attach the neck strap (see Chapter 1) and use that to
carry the camera. Keep the camera in the included case,
or in a camera bag to protect it.
◗ Avoid sudden temperature changes, which can cause
moisture to form on the camera and options. Keep the
camera and options in a case or bag if you need to move
them from a cold environment to a warm one. Allow
time for the camera and options to adjust to temperature
changes before using them.
◗ If necessary, clean the battery contacts with a dry cloth.
◗ If the LCD screen gets fingerprints or smudges on it, use
a soft, damp cloth to lightly wipe the screen.
Storing the Camera
◗ When you’re not using the camera, make sure the
camera is turned off and the lens is retracted.
Cleaning the Camera and Battery Charger
◗ Unplug the battery charger before cleaning.
◗ When the camera is not used for long periods of time,
remove the batteries and store them at a low temperature
in a dry location. This prevents damage to the camera
from battery leaks or corrosion.
◗ Use a clean, dry cloth to wipe the camera free of dust.
◗ Use a damp cloth for cleaning the battery charger.
◗ Keep the battery charger terminals clean by wiping them
with a dry cloth.
Maintenance and Troubleshooting
A-2
Do not store the camera in the following locations:
◗ Check the batteries and make sure they’re installed
correctly and charged. The included batteries need to be
charged before you can use them (see Chapter 1).
Recharge or replace the batteries.
◗ Where it will be exposed to direct sunlight, for example,
on a car dashboard
◗ Near sources of bright light or high humidity
◗ Near heat sources or in a closed car or trunk
◗ In areas of excessive dirt or dust
◗ If you are using the AC adapter, make sure it’s plugged
into a working outlet.
You can’t take a picture with the camera.
◗ Where it will be exposed to strong vibrations or
◗ The flash may be recharging. Wait until the photo
capture light (beside the viewfinder) stops flashing and
remains a steady green, and try again.
magnetic fields
Solving Camera Problems
◗ Make sure you’ve installed the CompactFlash memory
card in your camera. If it’s already installed, you may
need to format or eject it (see Chapter 1). Check to see if
a message is displayed on the camera’s LCD screen.
Before you call for help, check this list of problems and
possible solutions:
The camera has no power.
◗ The camera may have shut off automatically. If your
◗ The CompactFlash memory card may be full. Check the
picture counter on the display panel. Try setting the
camera to a lower image quality setting (see Chapter 2).
Erase some pictures or video clips (see Chapter 6), or
camera dial is set to
button to turn the power back on. If your camera dial is
set to , or , press any button on the back of
,
, or , press the shutter
,
the camera to turn the power on. (You can also turn the
camera off and then back on.)
Maintenance and Troubleshooting
A-3
transfer the pictures or video clips to your computer and
then erase them (see Chapter 10). Or replace your
pressing the shutter button partially to focus, then the
rest of the way to capture the image, your camera can
process pictures more quickly (see Chapter 2).
icon, recharge or replace the batteries (see Chapter 1) or
use the optional AC adapter (see Appendix B).
◗ If you want to quickly take up to 37 pictures in
succession, use the continuous shooting mode. See page
3-2 for details.
◗ The camera may be connected to your computer. When
camera itself. See Chapter 13 for instructions on taking
pictures from your computer.
◗ If you are taking a picture in Uncompressed Tiff mode,
the camera takes longer to process the image. Tiff images
create large files and can take approximately 32 seconds
to process. If you are trying to capture large, high quality
images that you can print, try setting the camera to
HyPict mode instead of Tiff mode. See page 2-10 to
disable Tiff mode and enable HyPict JPEG mode.
You can’t see clearly through the viewfinder.
◗ Adjust the view with the diopter dial. Set the diopter
with the camera dial turned to
accurate adjustment.
to make the most
The flash doesn’t work.
◗ Make sure the flash is not set to the flash off setting
.
The camera takes too long to take a picture.
◗ Check the batteries and make sure they’re installed
◗ You may be pressing the shutter all the way down at
once. This forces the camera to focus, make exposure
adjustments, and capture the image all at once. By
correctly. Recharge or replace the batteries if necessary.
Maintenance and Troubleshooting
A-4
◗ If you are using one of the automatic flash modes
(automatic, red-eye reduction, slow synchronized), the
flash only fires when there is insufficient light. If you
want to force the flash to fire, set it to forced mode.
(See Chapter 2.)
Nothing appears on the LCD screen (or the status display
panel).
◗ Check your batteries and make sure they’re installed
correctly. Recharge or replace the batteries if necessary.
◗ Make sure you’ve installed and formatted the
◗ You can’t use the flash in continuous shooting mode or
video clip capture mode.
◗ Check to make sure your camera’s flash setting is not set
to use an optional external flash if you’re trying to use
the camera’s flash. If you’re using an optional external
flash, make sure to use the Ext Flash setting in the Shot
SETUP menu (see Appendix B).
camera dial is set to
button to turn the power back on. If your camera dial is
set to , or , press any button on the back of
,
, or , press the shutter
,
the camera to turn the power on. (You can also press the
again to turn the camera back on.)
◗ If your external flash isn’t working, make sure your user
mode is set to Manual (see Chapter 1) and you have the
correct setting in the Shot SETUP menu. Also, make
sure the flash is placed on the camera correctly. (See
Appendix B for instructions on attaching and enabling
an optional external flash.) Your external flash may also
need batteries. Check the documentation that came with
your external flash for more information.
◗ Make sure the camera is not in
viewfinder mode (if
you want to use the LCD screen).
◗ If the last photo you took was an Uncompressed Tiff
mode photo, you will see a blank LCD screen when you
turn on the camera in playback mode. Tiff images take
as long as 34 seconds to appear on the LCD screen in
playback mode.
Maintenance and Troubleshooting
A-5
◗ The LCD screen turns off automatically when the
camera is connected to (and communicating with)
a computer or video device.
You can’t take certain types of pictures or make all the
settings you want.
◗ Some of the camera’s settings and features can’t be used
at the same time. For example, you can’t use continuous
The lens is still out even though the camera is turned off.
shooting mode and set the image quality to
or Tiff) at the same time.
(HyPict
◗ The camera may have shut off automatically. To retract
the lens, press the POWER button to turn the camera
back on, then press it again to turn the camera off.
and sensitivity settings, or to use fixed settings, you
need to set your user mode to Program or Manual.
See page 1-9 for details.
◗ The batteries may be low. Connect the camera to the
optional AC adapter, or replace or recharge the batteries.
Then turn the camera on and back off to retract the lens.
◗ Uncompressed Tiff mode images are 9.1MB. You can
take only one picture in this mode with your included
memory card. For high quality images that take up less
memory, try using HyPict mode. See Chapter 2 for
details.
The image on the screen is too dark.
◗ Adjust the brightness of the screen using the Camera
SETUP menu. See page 7-3 for instructions.
The menus disappear from the LCD screen.
◗ To use an optional external flash, you need to set your
user mode to Manual. See page 1-9 for details on
changing your user mode and Appendix B to use an
external flash.
◗ The menus disappear when you press the MENU
button. Press the MENU button again to make them
reappear.
Maintenance and Troubleshooting
A-6
The “pictures remaining” number on the display panel
The camera’s LCD screen is displaying the wrong language.
doesn’t decrease after you take a picture.
◗ You can change the language back in the Language/
Signal setup menu. Turn your camera dial to
and
◗ Your camera is operating correctly. The total number of
pictures you can store depends on your pictures’
press the button under the icon. (See page 7-5 for
complete instructions on changing the language setting.)
content. The number doesn’t always change, especially
when you’re using standard image quality. (To confirm
that the camera took the picture, you can turn the
When you are in video clip capture mode, the time shown
is less than 25 seconds.
camera dial to
taken.)
to display the last picture that was
◗ The camera’s CompactFlash card does not have enough
remaining memory to capture a complete video clip.
You can still capture a video clip for the amount of time
shown. If you need to capture a video clip for the full 25
seconds, erase some existing pictures or video clips (see
Chapter 6), or transfer the pictures or video clips to your
computer and then erase them (see Chapter 10). Or
replace your memory card with a new one (see
Chapter 1).
The camera’s date and time settings need to be reset often.
◗ When your camera is without charged batteries or a
connection to an optional AC adapter for more than one
hour, it loses the time, date, and other settings (and
returns to the default settings). To make sure you don’t
lose your settings, connect the camera to an optional
AC adapter while you are charging the batteries. Or,
purchase a backup set of batteries to use in the camera
while the others are recharging.
Maintenance and Troubleshooting
A-7
◗ Check your playback settings to make sure the sound
Solving Connection and Software
Problems
setting is turned on (see Chapter 6).
If you are having trouble connecting your camera to a
computer or video device, or installing or using the software,
check the suggestions below:
You get an error message when you try to transfer your
pictures to the computer.
◗ Make sure the cable is connected correctly as described
Nothing appears on the television or the sounds don’t play
in Chapter 9.
when you connect your camera to it.
have enough power.
◗ Make sure the video and audio cables are connected
correctly, as described on page 14-10, and the camera
and TV are turned on.
◗ Check the serial port settings in your Image Expert or
EPSON Photo!3 software. You may need to change the
Port and Speed serial connection settings to Auto.
◗ Make sure your camera dial is set to
.
◗ If you’re using a Windows system and have trouble
connecting to the COM port, check the computer’s
COM port settings. Make sure the port is properly
configured and that the Base I/O port address and the
Interrupt Request Number (IRQ) assigned to the port
are not in conflict with any other devices.
◗ If your TV has both Video and S-Video modes, make
sure it is set to Video mode. See the manual for your
television if you need help.
◗ Check your batteries and make sure they’re installed
correctly. Recharge or replace the batteries if necessary.
◗ Make sure your camera is set to the correct broadcast
signal system (see page 14-12). Also see your television’s
documentation for possible solutions.
Maintenance and Troubleshooting
A-8
◗ Check the port setting in your Windows Control Panel.
You may need to set your port to a faster speed, lower
the FIFO buffer size (advanced serial port
You get a “The Camera Is Not Responding” error message
(or a similar error message) when you’re using your
PhotoPC 3000Z software with the camera connected to
your computer.
configuration), or adjust the speed in your software. See
“Adjusting Camera Settings From Your Computer” on
page 13-5 for more information.
◗ Make sure the cable is connected correctly as described
in Chapter 9. Also make sure your camera is not turned
off and the batteries have power.
◗ If you’re using a Macintosh and the camera is sharing a
◗ Check the serial port settings in your Image Expert or
EPSON Photo!3 software. You may need to change the
Port and Speed serial connection settings to Auto.
◗ If your camera is connected to a USB hub, try
connecting the camera directly to your computer.
◗ Make sure you don’t have more than one of the
following open at the same time: Image Expert, EPSON
Photo!3, EPSON Auto Downloader, EPSON Photo!
Print2 Launcher, Camio Viewer, EPSON Photo!3
TWAIN.
◗ If you were able to use the camera with the computer
previously and then changed or added other settings on
your system, you may have a COM port conflict. Try
using a different COM port or reconfiguring the COM
port settings. (See your Windows documentation for
instructions.) If you were not able to use the camera
with your computer previously, you may have an
inoperable serial cable. Try using another cable.
◗ If your camera is connected to a USB hub, try
connecting the camera directly to your computer.
Maintenance and Troubleshooting
A-9
◗ Make sure you don’t have more than one of the
following open at the same time: Image Expert, EPSON
Photo!3, EPSON Auto Downloader, EPSON Photo!
Print2 Launcher, Camio Viewer, EPSON Photo!3
TWAIN.
◗ Try turning off any unnecessary extensions. See your
Macintosh documentation for more information.
The pictures transfer to your computer too slowly.
◗ If you’re transferring Tiff files or video clips, you can
expect the transfer to take much longer than it does for
JPEG files, due to large file sizes. The transfer speed is
especially slow when you are using a serial connection.
You are unable to drag and drop photos into a document.
◗ If your system has less than 32MB RAM, you may not
be able to use drag and drop. Make sure you don’t run
too many applications at the same time. You may need
to add memory to your system or use another method of
getting photos into your documents.
◗ If your system has less than 32MB RAM, the transfer
speed may be slow. Try using virtual memory. See your
computer documentation or system help for more
information.
◗ Your application may not support this method of adding
◗ Check the port setting in your Windows Control Panel.
You may need to set your port to a faster speed. See your
Windows documentation or help system for more
information.
pictures.
You are unable to copy and paste or import your photo into
a document on your Macintosh.
◗ If you’re transferring pictures to an application through
EPSON Photo!3 and you use the PhotoEnhance™
feature, the transfer will take longer. Try transferring
without PhotoEnhance.
◗ Try increasing your virtual memory using the Memory
Control Panel. Also increase the memory allocation for
your word processor or other application. (Select the
application and choose Get Info from the File menu.)
Maintenance and Troubleshooting
A-10
You can’t find your video clips (or photos) in EPSON
You are unable to format or use a CompactFlash memory
card with your camera.
Photo!3.
◗ Your camera stores photos and video clips on different
folders on the camera’s memory card. EPSON Photo!3
uses these folders for organizing photos and video clips.
From the Select Camera Directory list, choose
EPSON to view photos, or select Video Clips to view
video clips. If you use your CompactFlash memory card
with a device that can create folders, select the folder
where you have stored your video clips or photos.
◗ Make sure you’re using an ATA-compatible
CompactFlash memory card (Type I). Other cards may
not work with PhotoPC 3000Z. If you need help with a
card, call the appropriate manufacturer’s number. Some
are listed below:
◗ Lexar Media, (800) 789-9418
◗ SanDisk, (408) 542-0595
◗ Delkin Devices, (858) 586-0123
You get a TWAIN error message when you try to transfer
images with a TWAIN-compliant program, such as Adobe
Photoshop.
◗ Make sure you’ve installed the card correctly. The card’s
label should be facing the front of the camera, and the
arrow(s) on the label should point in.
◗ Make sure you select TWAIN_32, not TWAIN.
Your notebook computer’s PCMCIA drive can’t access a
CompactFlash memory card with a PCMCIA adapter.
◗ If you’re using an IBM ThinkPad, you may need an
updated driver for your PCMCIA port. Contact IBM
technical support.
Maintenance and Troubleshooting
A-11
When you upload pictures to a memory card in your
computer, your system appears to hang.
◗ In Windows 2000, do not select Block under Control
Panel > System > Hardware > Driver Signing, or
your driver installation will not be completed. Select
Ignore or Warn instead.
◗ Check the status bar at the bottom of your screen. If it
shows that the transfer is complete, your system is
operating correctly. You may have to click your mouse
to change the hourglass icon to a normal pointer.
◗ In Windows 2000, if you see a Digital Signature Not
Found screen, click Yes to continue with the
installation. (See page 9-9 for details.) If you select No,
your camera’s USB installation won’t be completed.
When you copy image files from your computer to a
CompactFlash memory card in your PCMCIA drive, the
camera can’t access the images.
You can’t play video clips on your computer.
◗ Make sure you have QuickTime installed on your
computer. You should have installed it when you
installed Image Expert. See Chapter 9.
◗ You can’t use this method to upload pictures to the
camera. You have to use the EPSON File Converter
to convert your images and EPSON Photo!3 to upload
your images.
You can’t insert video clips into your application.
◗ Some applications may not recognize the camera’s movie
file format. If you upgrade your QuickTime Player to
QuickTime Pro, you can use that program to save your
file in a format that your application recognizes. Go to
http://www.apple.com/quicktime/ on the Internet
for details.
You can’t install software or USB drivers in Windows 2000
or Windows NT.
◗ If you see an error message or the software doesn’t install
correctly, you may not have software installation
privileges. Contact your System Administrator.
Maintenance and Troubleshooting
A-12
You can’t download video clips, photos, or sounds with
Solving Picture Problems
Auto Downloader.
If you’re not satisfied with some of the pictures you get from
the PhotoPC 3000Z, you may need to adjust some of the
camera settings. Read the suggestions below.
◗ You can select which of these files you download in the
Auto Downloader Settings window. Open the Settings
window and make sure all the file types you want to
Your pictures display poor image quality on the screen or
instructions on setting up Auto Downloader.
◗ PhotoPC 3000Z captures images in 24-bit color
(16.7 million colors). Your pictures will not display
maximum image quality if your monitor or computer’s
video controller doesn’t support this color depth. You
may need to upgrade your system to achieve the best
possible image quality.
You can’t find your photos on the hard drive.
◗ If you are using the EPSON Photo! Print2 Launcher,
your photos aren’t stored on your hard drive, only
opened temporarily. Download your photos from the
camera, as described in Chapter 10.
◗ If your pictures look better on the screen than when you
print them out, you may need to upgrade your printer.
An EPSON Stylus ink jet printer, for example,
Image Expert doesn’t recognize the camera.
◗ If you have a version of Image Expert from a different
camera, printer, or other product, make sure you install
the version of Image Expert included on your PhotoPC
3000Z Software CD-ROM and use it when you are
connecting to your camera. The correct version is named
Image Expert - PhotoPC 3000Z (version 1.8.7).
provides excellent image quality. Also see your printer
manual to change your print settings, if necessary.
Maintenance and Troubleshooting
A-13
◗ If you used drag and drop to insert your pictures, they
may appear grainy. Try importing them into your
documents instead.
◗ If you have already taken photos, you can use your
Image Expert software to adjust their colors. See your
(Instructions for reading the Image Expert manual are
on page 9-5.)
When you preview images on your computer, they look
distorted.
Your picture is blurry or out of focus.
◗ If you are using an STB® Velocity 128 video card and
have a screen resolution of 800 × 600 or 640 × 480, you
may notice this phenomenon. Slowing down the
acceleration on your video card may solve this problem:
Click Start, point to Settings, click Control Panel,
then double-click System Properties. On the
◗ Make sure your subject is within the camera’s range. You
should be at least 20 inches away to take a picture
without the flash, 20 inches to 14 feet away for a wide
angle shot (zoomed out) with the flash, and 20 inches to
11 feet away for a telephoto shot (zoomed in) with the
flash.
Performance tab, click the Graphics button. Select a
slower acceleration and click OK. See your Windows
documentation or help system for more information.
◗ If you are taking a picture in macro mode, the camera
can focus for distances between 8 inches and 20 inches
when the camera is zoomed in (telephoto). If you want
to take closer pictures (as close as 2.36 inches), make
sure the camera is zoomed all the way out (wide angle).
See page 4-4.
The colors in your picture don’t look right.
◗ When you take pictures under certain artificial lighting
conditions, the colors may be slightly distorted. You can
adjust your camera’s white balance setting to correct the
colors while you are taking photos (see Chapter 5).
Maintenance and Troubleshooting
A-14
◗ When you take macro close-ups, make sure you have
adequate lighting. Using a tripod will help you capture
sharp pictures.
◗ If you’re using the flash, make sure your subject is within
the range of 14 feet for wide angle shots or 11 feet for
telephoto shots.
◗ Make sure that your subject isn’t moving and that you
(until the camera status light or photo capture light
starts flashing).
◗ Use Image Expert to adjust the picture’s brightness and
contrast. See your electronic Image Expert manual.
(Instructions for reading the manual are on page 9-5.)
◗ Try adjusting the camera’s exposure or sensitivity
settings (use the Manual user mode). See Chapter 5 for
details.
◗ If you want to photograph a moving subject, try
increasing the shutter speed. See Chapter 5 for
information about how to change the shutter speed.
◗ If you’re taking pictures in the Manual user mode, look
for the EV! warning that appears on your LCD screen
when you are taking pictures out of the ideal exposure
range. If you have trouble setting both the aperture and
shutter speed manually, try adjusting the aperture and
letting the camera choose the shutter speed with
Aperture Priority mode (see Chapter 5).
◗ Make sure your flash is not set to flash off
.
◗ When you focus on a nearby object, your picture’s
background may appear blurry. Try changing your
focus.
Your picture is too dark (underexposed).
◗ You may need to use the flash. Make sure the setting is
◗ If you’re using the macro mode to take a close-up photo,
not flash off
.
be sure to provide adequate lighting for your subject.
Maintenance and Troubleshooting
A-15
◗ If you’re taking a picture at night and you want to light
up the background as well as your subject, use the
camera’s slow synchronized flash mode.
Part of your picture is missing.
◗ Make sure you’re not blocking the lens with your finger,
neck strap, clothing, or other object.
◗ If you need more light, attach an optional external flash
A horizontal or vertical red line appears on your picture.
to the camera’s hot shoe (see Appendix B).
shiny surfaces that reflect excessive amounts of light into
your lens.
Your picture is too light (overexposed).
◗ If you’re using the forced flash setting, it may be too
bright. Try setting the flash to the
automatic setting.
The wrong date and/or time are displayed on your pictures.
◗ If you’re facing a bright light source, you may need to
◗ When you change the batteries in your camera, you
may need to reset the clock. You can use the SETUP
menu or set the camera’s clock from your computer. See
Chapter 7 or Chapter 13 for more information.
shoot your picture from a different angle.
◗ Use Image Expert to adjust the picture’s brightness. See
your electronic Image Expert manual. (Instructions for
reading the manual are on page 9-5.)
Your pictures don’t look as good as they used to.
◗ Set user mode to Program or Manual and adjust the
camera’s automatic exposure setting (see Chapter 5).
◗ Your camera’s lens may be dirty or dusty. Try cleaning it
◗ If you use the flash for macro shots, your pictures may
come out too light because the flash is close to the
subject. Try using adequate ambient lighting and setting
by following the instructions on page A-2.
the flash to
.
Maintenance and Troubleshooting
A-16
The area captured in the photo is different from what you
saw in the viewfinder.
Where To Get Help
EPSON provides technical assistance 24 hours a day through
the electronic support services and automated telephone
services listed in the following table:
◗ Make sure you look straight through the viewfinder.
◗ If you’re taking a close-up or macro mode picture, turn
the camera dial to
and use your LCD screen to
NOTE
preview your picture.
If you need software help, see “Software Support,” on page A-18.
Video clips play back sideways.
Service
Access
◗ Capture your video clips with the camera turned
World Wide Web
From the Internet, you can reach EPSON Support
at http://support.epson.com. At this site, you
can download drivers and other files, look at
documentation such as product brochures and
user manuals, and access troubleshooting
information.
upright. You can’t rotate video clips.
EPSON Internet FTP Site
If you have Internet FTP capability, use your Web
browser (or other software for FTP downloading)
to log onto ftp.epson.com with the user name
anonymous and your e-mail address as the
password.
EPSON E-MAIL Technical
Support
To receive technical advice through e-mail, go to
http://support.epson.com and complete the
form under the troubleshooting tab, as requested.
Automated Telephone
Services
A variety of automated help services are available
24 hours a day, seven days a week. To use these
services, you must have a touch tone telephone
and call (800) 922-8911.
Maintenance and Troubleshooting
A-17
To speak to a technical support representative, dial
(562) 276-4303 (U.S.), or (905) 709-3839 (Canada),
6 AM to 6 PM, Pacific Time, Monday through Friday.
Toll or long distance charges may apply.
Software Support
If you are having problems with a software application
included with the camera, you can call one of the following
numbers for technical support:
Before you call, please have the following information ready:
◗ (800) 501-8902 for Sierra Imaging Image Expert
software questions. Available weekdays 9 AM to 5 PM,
Worldwide support number is (831) 461-4710.
◗ Product name (EPSON PhotoPC 3000Z)
◗ Product serial number (located on the bottom of the
camera)
◗ (562) 276-4303 for the EPSON Photo!3 application
and TWAIN driver, EPSON Auto Downloader,
EPSON File Converter, and EPSON Photo! Print2.
◗ Proof of purchase (such as a store receipt) and date of
purchase
◗ Computer configuration
Software Licensing
◗ Description of the problem
You can install EPSON Photo!3, EPSON File Converter,
EPSON Photo! Print2, and the EPSON Auto Downloader
on multiple computer systems. If you want to install Image
Expert on multiple computer systems, please contact Sierra
Imaging at (800) 501-8902 regarding the licensing fee.
EPSON Accessories
You can purchase manuals and accessories from EPSON
Accessories at (800) 873-7766 or visit our website at
www.epsonsupplies.com (U.S. sales only). In Canada, please
call (800) 873-7766 for dealer referral.
Maintenance and Troubleshooting
A-18
B
Optional Accessories
ou can use a variety of options with the
PhotoPC 3000Z to enhance its capabilities and
Y
convenience. This chapter describes how to use your camera
with the following options:
◗ AC adapter
◗ Tripod
◗ Optional lenses and filters
◗ External flash
◗ PCMCIA adapter
◗ Image Authentication System software (for verifying
A
B
that a photo has not been altered)
Optional Accessories
B-1
You can purchase an additional NiMH Battery Pak (with 4
batteries) or replacement NiMH Power Pak (which contains
a battery charger and 4 batteries). With a backup set of
charged batteries, you’ll have plenty of battery power.
Additional CompactFlash memory cards are also handy to
have to store more pictures.
CompactFlash memory cards are available from the various
manufacturers like:
◗ Lexar Media, (800) 789-9418
◗ SanDisk, (408) 542-0595
◗ Delkin Devices, (858) 586-0123
Make sure you purchase the correct size card. The PhotoPC
3000Z will accept ATA-compatible Type I CompactFlash
cards up to 192MB.
These options should be available where you bought your
PhotoPC 3000Z.
You can order the following options directly from EPSON
Accessories at (800) 873-7766 (U.S. sales only). In Canada,
please call (800) 873-7766 for dealer referral. Or visit our
website at www.epsonsupplies.com (U.S. sales only).
Using the Optional AC Adapter
The universal AC adapter allows you to connect your
PhotoPC 3000Z to any standard (110/230 V) outlet. You
should use the AC adapter when you are previewing images,
transferring images and operating the camera from your
computer or video device, or using Print Mark. It is also
convenient if you are taking indoor portrait photos.
Accessory
Product code
B867081
EPSON Universal AC Adapter
NiMH Battery Pak (4 batteries)
Universal NiMH Power Pak (charger and 4 batteries)
EPSON Image Authentication System (IAS)
B818113
B818172
The adapter powers the camera but does not charge the
batteries.
PPC3-IAS
Optional Accessories
B-2
2
Plug the adapter cable into the DC port on the camera.
WARNING
◗
Use only the AC adapter designed for the PhotoPC 3000Z.
Using any other adapter could cause fire, electrical shock, or
injury.
◗
◗
◗
Do not use the AC power cable and the adapter for any
purpose other than powering your PhotoPC 3000Z.
If the AC plug doesn't fit your outlet, have a proper outlet
installed by a qualified electrician.
To avoid radiation danger, do not expose or remove the
ferrite core.
To avoid losing any images or settings, make sure the camera
has finished processing and is turned off before you connect
or disconnect the AC adapter. Then follow these steps:
3
Plug the AC adapter into an electrical outlet.
1
Open the connector cover on the side of the camera.
Optional Accessories
B-3
Using a Tripod
Follow these steps to use the camera with any standard tripod:
Attaching an Optional Converter
Lens or Filter
You can attach a 49 mm telephoto or wide-angle converter
lens to the camera using the lens adapter that came with your
camera. You can also use 49 mm close up lenses and filters.
1
Assemble and set up the tripod according to the
manufacturer’s instructions. Make sure the tripod is
well-balanced on a flat surface.
You can order accessory Tiffen lenses and filters from DC
Pro Digital Camera Accessories at (800) 522-7835 or
(516) 434-8800. See the brochure that came in your box.
2
Find the opening for the tripod screw on the bottom of
your camera.
tripod screw
opening
Screw the lens adapter onto the camera’s lens, and then screw
the converter lens or filter onto the lens adapter.
Carefully place the camera on the tripod. Screw the
camera on until it is firmly in place.
3
Adjust the tripod to view your subject as desired.
Optional Accessories
B-4
3
Slide the flash onto the top of the camera’s hot shoe as
shown below. (See the manual for the flash if you need
more detailed instructions.)
Attaching an Optional Flash
You can attach an optional flash unit to the camera to
significantly increase the brightness of your images in dark
environments. It also works well for portrait photography.
EPSON recommends the following external flash (available
through photo specialty shops, mail order catalogs, and on
the Internet):
Brand: Metz
Model: 32Z-2
NOTE
The camera must be in the Manual user mode to enable the
external flash. See page 1-9 to change your user mode to Manual.
Follow these steps to attach the flash and set up your camera
to use it:
1
2
Make sure the camera and flash are both turned off.
If necessary, insert batteries into the flash unit as
described in the manufacturer’s instructions.
Optional Accessories
B-5
4
5
6
Turn on the camera and turn your camera dial to
You see the SETUP menu.
.
7
8
Turn the camera dial to the setting you want to take a
picture.
Turn on the flash.
Now you are ready to start using your camera with the flash.
NOTE
The camera’s flash modes are disabled when using the external
flash. See the flash documentation for information on any
available settings.
Press the button next to Shot SETUP.
You see the Shot SETUP menu.
Press the button next to
Trailing (or the current
flash setting) to change the setting to Ext Flash
(external).
Optional Accessories
B-6
Installing the PCMCIA Adapter
Follow these steps to install the adapter:
Using a PCMCIA Adapter
If your desktop or notebook computer has a Type II
PCMCIA card slot, you can use a PCMCIA adapter to access
images stored on CompactFlash cards.
1
Insert the memory card all the way into the adapter.
NOTE
◗
If you don’t have an adapter, you can use Image Expert to
transfer photos to your computer. See Chapter 10.
◗
If you can’t access a card in your notebook computer,
contact the computer manufacturer. See page A-11 for more
information.
2
Insert the adapter into your computer’s Type II
PCMCIA slot.
If you’re using a Macintosh, you must enable PC Exchange
extension software to access files on CompactFlash cards. See
your Macintosh documentation for information.
For information on installing, formatting, and removing
memory cards from your camera, see Chapter 1.
Optional Accessories
B-7
Transferring Photos With the Adapter
Once the adapter and card are installed in your computer’s
PCMCIA slot, you can transfer photos by simply copying
them to your hard drive. This is the fastest way to get
pictures into your computer. The photos are stored in the
DCIM/100EPSON folder on the card and the video clips are
stored in the Movie folder.
Image Authentication System
If you want to verify the authenticity of photos taken with
your camera, you can purchase the EPSON Image
Authentication System (IAS). This software detects when
even a single bit of digital data in a picture has been altered.
Because IAS doesn’t change the file format, it has no effect
on your ability to store and display pictures, or to use them
in other applications.
◗ In Windows, use My Computer or the Windows
Explorer to drag and drop image files to your hard drive.
For ordering information, see page B-2.
◗ On a Macintosh, use the Finder to drag and drop image
files to your desktop or hard drive.
Optional Accessories
B-8
Specifications
C
Power
Camera
Sources
Includes 4 AA rechargeable NiMH
batteries and charger. Also accepts 4 AA
batteries (single-use alkaline or lithium)
Physical Dimensions
Width
Height
Depth
Weight
4.3 in (108 mm)
Optional Universal AC adapter
(B867081)
3.5 in (89 mm)
2.6 in (65 mm)
Battery Life
Over 2000 pictures using the viewfinder
Approximately 155 pictures using the
LCD screeen (with automatic shut off set
to 30 seconds)
(when using the
included 1.2V/
1500mAh NiMH
batteries)
12.9 oz (365 g)
without batteries, strap, lens cap, and
CompactFlash memory card
Approximately 200 minutes playback
A
B
Specifications
C-1
Technical
Serial cable,
Windows PC
10-pin connector (camera)
9-pin DSUB female connector
(computer)
Product type
Digital still AF camera with LCD screen
CCD
1/1.8 inch color area CCD (3.34
megapixels)
Serial cable,
Macintosh
10-pin connector (camera)
8-pin mini-DIN male connector
(computer)
Image resolution
2048 × 1536 pixels (fine and super fine)
640 × 480 pixels (standard)
2048 × 768 pixels (panoramic fine and
super fine)
USB cable
Small size, B-Type connector (camera)
Standard, A-Type connector (computer)
2544 × 1904 pixels* (HyPict)
2544 × 952 pixels* (HyPict panorama)
* Interpolated
USB
communication
speed
Up to 12 Mbps
File formats
Bit depth
Still images: JPEG, Tiff
Video out
NTSC and PAL standards
2MB flash program memory
16MB
Video clips: QuickTime Movie
(Motion JPEG)
Internal ROM
Internal RAM
16 million colors, 24-bit
Expansion memory 16MB CompactFlash memory card;
also accepts optional 4MB to 192MB
Serial
communication
speed
Up to 230.4 Kbps with high-speed serial
port (19.2 Kbps or higher)
Type I CompactFlash memory cards
Self-timer
10 seconds
Built-in
Tripod mount
Specifications
C-2
Environmental
Temperature
Photographic
Lens
Operating: 41 to 95 °F (5 to 35 °C)
Non-operating: –4 to 140 °F (–20 to
60 °C)
f = 7 to 21 mm (equivalent to a 34 to
102 mm lens on a 35 mm camera)
F2.0 to 2.5
Humidity
Operating: 30 to 80% (non-condensing)
Non-operating: 10 to 80% (non-
condensing)
Auto-focus range
20 inches (50 cm) to infinity (normal)
8 to 20 inches (20 to 50 cm)
(macro mode)
2.36 to 20 inches (macro mode,
wide angle)
Safety
Manual-focus range Three settings (approx. 3 ft., 10 ft., and
infinity) for normal mode and two
United States
FCC Part 15 Subpart B Class B
CSA C108.8 Class B
settings for macro mode
Canada
LCD screen
Sensitivity
1.8-inch TFT color LCD (110 thousand
pixels: 512 × 218 pixels) Shows 98% of
field captured
Equivalent to ISO 100/200/400
Specifications
C-3
Exposure control
Programmed auto exposure
Exposure value adjustment: –2 to +2 EV,
in 9 or 21 steps
Manual shutter speed and aperture
settings, and shutter-priority and
aperture-priority settings
Flash modes
Forced flash, automatic, flash off,
red-eye reduction, leading or trailing slow
synchronized flash modes (leading or
trailing can be set through the LCD
menus)
External flash mode for optional external
flash that attaches to hot shoe on camera
(can be enabled through the LCD
menus)
Spot metering and matrix metering
White balance
TTL automatic white balance
Fixed white balance (5200 °Kelvin)
User-defined white balance
Photo Processing Time and File Size
(approximate)
Zoom
3× optical zoom
2× digital zoom
Photoprocessing
time for playback
(seconds)
Shutter
Electric iris with mechanical shutter,
8 seconds to 1/750 seconds (fastest
shutter speed depends on aperture
setting)
Image
Mode
Photo processing
time (seconds)
File Size
100KB
500KB
1.0MB
1.2MB
9.1MB
Standard
Fine
0.07
1.0
0.5
1.5
2.5
4.0
34.0
Viewfinder
Real-image optical, with centering cross
hair (view range approximately 83%)
Adjustable focus with diopter
Super Fine
HyPict
Tiff
1.0
14.0
32.0
Aperture
Flash
F2.0, F2.3, F2.8, F4.0, F5.6, F8.0
Automatic luminance control flash
Specifications
C-4
NiMH Battery Charger
NiMH Batteries
Type
Cylindrical sealed Nickel-Metal Hydride
Physical Dimensions
rechargeable battery
Width
Height
Depth
Weight
3.0 inches (76 mm)
Size
AA
4.5 inches (115 mm)
1.1 inch (28 mm)
Output
DC 1.2 V
Approximately 4.6 oz (130 g)
Optional Universal AC Adapter
Physical Dimensions
Technical
Width
Height
Depth
1.7 inches (43 mm)
1.22 inches (31 mm)
4.1 inches (104 mm)
Input
100 to 240 V, 50 to 60 Hz
Output
DC 1.2 V/490 mA × 4
Charging time
240 minutes maximum (initial charge)
2 1/2 hours average (subsequent charges)
Technical
Output
Power consumption Approximately 8W
DC 7 V/2.0 A
Charging
temperature
41 to 95 °F (5 to 35 °C)
Input
100 to 240 V AC, 50 to 60 Hz
Storage temperature −4 to 86 °F (−20 to 30 °C)
Specifications
C-5
◗ At least 40MB free hard disk space (150MB when using
CompactFlash Memory Card
Photo! Print2)
Storage Capacity
16MB
◗ VGA or SVGA monitor with at least 256-color display
(16-bit color or greater recommended)
◗ Mouse or other pointing device
Physical Dimensions
◗ 16-bit sound card and speakers
Width
Height
Depth
1.7 inches (42.8 mm)
1.5 inches (36.8 mm)
0.13 inch (3.3 mm)
◗ QuickTime 3.0 or later (QuickTime 4.0 is included
with Image Expert)
Serial Connection
◗ Microsoft® Windows 2000, Windows 98, Windows 95,
or Windows NT 4.0 (Service Pack 3 or later
recommended)
Minimum System Requirements
To transfer images to your computer and edit them, make
sure your system meets these minimum requirements:
◗ Serial port with standard RS-232C interface (19200 bps
or higher)
Windows Systems
◗ IBM-compatible PC with 486 or higher processor
USB Connection
◗ Windows 2000 or Windows 98 PC with built-in USB
◗ At least 32MB RAM (64MB when using Photo! Print2)
port
◗ Double-speed CD-ROM drive
Specifications
C-6
◗ Power Macintosh G3 or later with System Software
Macintosh Systems
Version 8.5.1 or later
◗ At least 32MB RAM (96MB when using Photo! Print2)
◗ Built-in USB port
◗ At least 40MB free hard disk space (150MB when using
Photo! Print2)
◗ CD-ROM drive
◗ VGA monitor with minimum resolution of 640 × 480
◗ 16-bit sound card and speakers
◗ QuickTime 3.0 or later (QuickTime 4.0 is included
with Image Expert)
Serial Connection
◗ Macintosh PowerPC with System Software Version 7.5
or later
◗ Power Macintosh G3 or later with System Software
Version 8.5.1 or later
◗ Macintosh modem/printer serial port (19200 bps or
higher)
USB Connection
◗ iMac with Mac® OS Version 8.5.1, or later
Specifications
C-7
Declaration of Conformity
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We:
Located at:
EPSON AMERICA, INC.
MS 6-43
3840 Kilroy Airport Way
Long Beach, CA 90806-2469
Telephone : (562)290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to
reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Trade Name:
Type of Product:
Model:
EPSON
Digital Still Camera
G790A
Product: EPSON PhotoPC3000Z
Regulatory Information and Warranty
D-2
FCC Compliance Statement
FCC COMPLIANCE STATEMENT
WARNING
FOR AMERICAN USERS
The connection of a non-shielded equipment interface cable to this equipment
will invalidate the FCC Certification of this device and may cause interference
levels that exceed the limits established by the FCC for this equipment. It is the
responsibility of the user to obtain and use a shielded equipment interface cable
with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio and television reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
FOR CANADIAN USERS
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
◗
◗
◗
Reorient or relocate the receiving antenna
Canada.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
◗
Consult an experienced radio/TV technician for help.
Regulatory Information and Warranty
D-3
rating label or serial number be removed or should the product fail to be properly
maintained or fail to function properly as a result of misuse, abuse, improper
installation, neglect, improper shipping, damage caused by disasters such as fire,
flood, and lightning, improper electrical current, software problems, interaction with
non-EPSON products, or service other than by an EPSON Authorized Servicer. If a
claimed defect cannot be identified or reproduced in service, you will be held
responsible for costs incurred.
Warranty
EPSON AMERICA, INC.
LIMITED WARRANTY
What Is Covered: Epson America, Inc. (“EPSON”) warrants to the first end-user
customer that the EPSON PhotoPC 3000Z Digital Camera enclosed with this
limited warranty statement, if purchased and used in the United States or Canada,
conforms to the manufacturer’s specifications and will be free from defects in
workmanship and materials for a period of one year from the date of original
purchase. EPSON further warrants to the first end-user customer that the Nickel
Metal Hydride Battery Charger and four Nickel Metal Hydride Batteries enclosed
with this limited warranty statement will be free from defects in workmanship and
materials for a period of ninety days from the date of original purchase.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME
LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF
THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES
ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE.
UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS
MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS
PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA,
INC., NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS,
INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE
USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER
RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL
THEORY.
What EPSON Will Do To Correct Problems: Should your EPSON product prove
defective during the warranty period, please call EPSON at 562-276-4303 for
warranty repair instructions and return authorization, if required. An EPSON service
technician will provide telephone diagnostic service to determine whether the unit
requires repair. If repair is required, EPSON will, at its option, repair or replace on an
exchange basis the defective unit, without charge for parts or labor. If the product
requires repair or replacement, it is your responsibility to package it in its original
container or an equivalent, along with proof of the date of original purchase and ship
it to EPSON. Packaging and shipping costs incurred in presenting your EPSON
product for warranty service are your responsibility. Return shipping costs from the
EPSON repair facility are EPSON’s responsibility. When warranty service involves
the exchange of the product or of a part, the item replaced becomes EPSON
property. The exchanged product or part may be new or previously repaired to the
EPSON standard of quality. Exchange or replacement products or parts assume the
remaining warranty period of the product covered by this limited warranty.
In Canada, warranties include both warranties and conditions.
Some jurisdictions do not allow limitations on how long an implied warranty lasts
and some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from jurisdiction to jurisdiction.
What This Warranty Does Not Cover: This warranty covers only normal consumer
use in the United States and Canada. This warranty does not cover damage to the
EPSON product caused by parts or supplies not manufactured, distributed or
certified by EPSON. This warranty does not cover third party parts, components or
peripheral devices added to the EPSON product after its shipment from EPSON.
EPSON is not responsible for warranty service should the EPSON label or logo or the
To locate the EPSON Authorized Reseller nearest you call:
(800) 922-8911
or write to:
Epson America, Inc. • P. O. Box 93012 • Long Beach, CA 90809-9941 • MS: 6-40
Regulatory Information and Warranty
D-4
Index
lens cap, 1-7 to 1-8
neck strap, 1-6 to 1-7
options, B-4 to B-6
Audio
A
AC adapter, 4, 2-3, 7-1, B-2 to B-3, C-5
Accessories, 4, B-1 to B-8
Acquiring photos, TWAIN programs, 10-9 to 10-10
Acrobat Reader
adding, 2-17 to 2-18, 6-6 to 6-7
converting, 14-2 to 14-5
downloading to computer, 10-2 to 10-4, 10-6 to 10-7
in video clips, 3-2
playing in slideshow, 6-14
see also Alert sounds
installing, 9-1 to 9-5
using, 9-5
Action photos, 2-15
Albums
copying from, 11-4 to 11-5
dragging pictures from, 11-5 to 11-6
saving files in, 10-2, 10-4
Alert sounds, setting, 7-2
Annotation, audio, 2-17 to 2-18
Aperture
uploading, 14-6 to 14-7
AUDIO IN port on video device, 14-11
Authenticity of pictures, B-8
priority, 5-4 to 5-5
A
B
setting, 5-3 to 5-5
AppleTalk, 9-8, A-9
Index 1
Auto Downloader
Batteries
charging, 1-2 to 1-3
downloading files, 10-6 to 10-7
installing, 9-1 to 9-5
one-step downloading, 10-8
problems, A-13
checking, 2-2
handling, 1-5
installing, 1-4
settings, 10-7 to 10-9
USB camera event, 10-14
Auto flash, 2-12
Automatic exposure value, 5-2 to 5-3
Automatic power off
setting, 7-1 to 7-2
low, A-3
options, 1-5
problems, A-3, A-7
replacing, 4, 1-4
specifications, C-1
waking camera, 2-7
Battery charger
AV Out port, 14-11
cleaning, A-2
safety instructions, 5 to 6
specifications, C-5
B
Beep, enabling and disabling, 7-2
Bitmap (BMP) files, 10-12
Black and white pictures, taking, 2-14
Blurry
Background, lighting, 2-12 to 2-13
Bag, camera, 1-8
pictures, A-14 to A-15
viewfinder, A-4
Bright conditions, 5-1, 5-12
Brightness
LCD setting, 7-3
picture, A-15
Broadcast signal, 14-12, A-8
Index 2
Buttons
alert sounds, 7-2
Camera (continued)
ID, 13-8
flash, 2-11, 10-14
image quality, 2-9, 10-14
POWER, 2-1
shutter see Shutter
timer, 2-14, 10-14
language setting, 7-5
lens, 5-5, A-6
maintenance, A-1 to A-3
microphone, 2-17
POWER button, 2-1
power problems, A-3
Print Mark menu, 8-2 to 8-7
setting up, 1-1 to 1-14
settings, 7-1 to 7-5
C
Cable
Macintosh serial, 9-7 to 9-8
PC serial, 9-6 to 9-7
USB, 9-8 to 9-9
time and date settings, 7-4
unpacking, 1-1
video, 14-10 to 14-12
Camera
alert sounds, 7-2
uploading images, 14-1 to 14-7
USB events, 10-14 to 10-16
volume setting, 7-3
AV Out port, 14-11
case, 1-8
cleaning, A-2
waking, 2-7
warranty, D-4
connecting to computer, 9-6 to 9-9
description, 13-6
Camera Event Monitor (Macintosh), 10-16
Camera Events window (Windows), 10-15
dial settings, 2-1 to 2-2
error messages, 8-6
features, 1 to 3
fixing condition settings, 5-10 to 5-12
flash settings, 2-11 to 2-13
A
B
Index 3
Camera mode
continuous shooting, 3-2 to 3-4
Close-up, optional lenses, B-4
Close-ups
Full Auto, 1-9
macro, 4-4 to 4-5
problems, A-14 to A-15
taking, 4-4 to 4-5
Color
Manual, 1-9
manual focus, 4-5 to 4-6
monochrome, 2-14
problems, A-13, A-14
tips, 5-12 to 5-13
Program, 1-9
sleep, 2-7
Tiff, 2-10
COM port, A-8 to A-10
Components, camera, 1-1
Computer
connecting camera to, 9-6 to 9-9
taking pictures from, 13-1 to 13-5
viewfinder, 2-4 to 2-6
Camera status light, 2-3
Camio Viewer, 11-6 to 11-8
Cancelling deletion of pictures, 6-5
Cap, lens, 1-7
Capturing video, 3-1 to 3-2
Card, CompactFlash memory, see Memory card
Caring for camera, A-1 to A-3
Case, camera, 1-8
Charger, see Battery charger
Charging batteries, 1-2 to 1-3
Cleaning camera and battery charger, A-2
Clock
bright, 5-12
camera storage, A-2 to A-3
cloudy, 5-12
fixing settings, 5-10 to 5-12
fluorescent lighting, 5-13
shady, 5-13
Configuring
camera, 7-1 to 7-5
problems, A-7, A-16
camera USB events, 10-14 to 10-16
setting, 1-10 to 1-11, 7-4
Index 4
Confirmation screen
Cross hairs, viewfinder, 2-5
adding sound, 2-17 to 2-18
enabling, 2-16
options, 2-8
Custom white balance, 5-7, 5-8 to 5-9
D
quick delete, 2-18 to 2-19
quick playback, 2-18 to 2-19
Confirming DPOF files, 8-5
Connecting
Dark
conditions, 5-1
LCD screen, A-6
pictures, A-15 to A-16
Date and time
camera, 9-6 to 9-9
problems, A-8 to A-13
serial cable, 9-6 to 9-8
USB cable, 9-8 to 9-9
Continuous shooting
problems, A-5
setting, 1-10 to 1-11, 7-4
Declaration of Conformity, D-2
Deleting
all pictures, 6-4
taking pictures, 3-2 to 3-4
with the timer, 3-4
Contrast, A-15
audio recordings, 6-8
cancelling picture deletion, 6-5
current picture, 6-3
Converter lens, B-4
downloaded pictures, 10-4, 10-10, 10-12
DPOF files, 8-6
locked pictures, 6-4
pictures using Confirmation screen, 2-18 to 2-19
pictures using LCD screen, 6-3 to 6-5
selected pictures, 6-4 to 6-5
video clip, 6-11 to 6-12
Converting files for uploading, 14-2 to 14-5
Copy and paste, 11-4 to 11-5, A-10
Copying pictures into documents, 11-4 to 11-5
Counter
A
B
checking, 2-3
problems, A-7
Index 5
Destination settings, Auto Downloader, 10-7
Dial
Downloading
audio recordings, 10-2 to 10-4, 10-6 to 10-7, 11-8
camera, 2-1 to 2-2
diopter, 1-14
Auto Downloader, using, 10-6 to 10-9
Digital panoramas, 4-3 to 4-4
Digital Print Order Format (DPOF) files
confirming or changing, 8-5
creating, 8-2 to 8-4
problems, A-13
slow, A-10
using PCMCIA adapter, B-8
deleting, 8-6
description, 8-1
error messages, 8-6 to 8-7
Digital signature, 9-10, A-12
Digital zoom, 4-1 to 4-3
Diopter, 1-14, A-4
video clips, 10-2 to 10-4, 10-6 to 10-7, 11-8
Drag and drop, 11-5 to 11-6, 11-7 to 11-8, A-10, A-14
Driver signing, A-12
E
Disabling flash, 2-12
Display panel, 2-2 to 2-4
Display, LCD see LCD screen
Distorted pictures, A-14
Documentation, using, 4, 9-5
Documents
English, resetting on camera, 7-5
Environmental specifications, C-3
EPSON
automated telephone services, A-17
Electronic support services, A-17 to A-18
help, A-17 to A-18
copying pictures into, 11-4 to 11-5
getting pictures into, 11-1 to 11-8
World Wide Web site, A-17
Index 6
EPSON Photo!3
importing images, 10-9 to 10-13
Exporting images, 10-10 to 10-13
Exposure
installing, 9-1 to 9-5
missing pictures, A-11
adjusting, 5-1 to 5-5
missing video clips, A-11
support, A-18
checking settings, 2-3
taking pictures, 13-4 to 13-5
uploading files to camera, 14-6 to 14-7
USB camera event, 10-14
using, 10-11 to 10-14
fixing settings, 5-10 to 5-12
locking with shutter button, 2-5, 2-8
problems, A-6, A-15 to A-16
tips, 5-12 to 5-13
Erasing
DPOF files, 8-6
10-12
External flash
pictures from camera using LCD screen, 6-3 to 6-5
pictures using quick delete, 2-18 to 2-19
video clip, 6-11 to 6-12
enabling, B-6
problems, A-5, A-6
F
Error messages
Auto Downloader, 10-13
EPSON Photo!3, 10-13
Fast forwarding video clips, 6-10
Fast shooting, 3-2 to 3-4
Image Expert, 10-4 to 10-5
on camera display panel, 8-6
on computer, A-8 to A-10
FCC Compliance Statement, D-3
Features, camera, 1 to 3
A
B
EV (Exposure Value) see Exposure
Events, USB camera, 10-14 to 10-16
Index 7
File Converter
file types, 14-2
Flash
charging, 2-11
installing, 9-1 to 9-5
forced, 2-12
screen captures, 14-7 to 14-9
sorting images, 14-3, 14-5
sound files, 14-3, 14-5
using in Macintosh, 14-4 to 14-5
using in Windows, 14-2 to 14-4
off, 2-12
range, A-15
red-eye reduction mode, 5-13
settings, 2-11 to 2-13
troubleshooting, A-15, A-16
Fluorescent lighting, 5-7, 5-13
Focus
Files
BMP, 10-12
converting during transfer, 10-10 to 10-13
downloading, 10-1 to 10-13
JPEG, 2-9 to 2-10, 10-10 to 10-12, 11-2
Motion JPEG, 3-1
PCX, 10-12
PICT, 10-12
QuickTime Movie, 3-1, A-12
size, C-4
Tiff, 2-10, 10-10 to 10-12, 11-2
uploading, 14-1 to 14-7
viewfinder adjustment, 1-14
Folders, on camera, A-11
Formats
EPSON Photo file, 14-1 to 14-7
exported files, 10-12
JPEG, 2-9 to 2-10
Filming video clips, 3-1 to 3-2
Filters, optional, 5-12, B-4
Fine image quality, 2-10
Motion JPEG, 3-1
Fixed focus settings, 4-5 to 4-6
QuickTime Movie, 3-1, A-12
Tiff, 2-10, A-4
Formatting memory card, 1-11
Index 8
Found New Hardware Wizard, 9-9 to 9-10
Framing
I
Image Authentication System (IAS), 4, B-8
Image Expert
close shots, 4-4 to 4-5
panoramas, 4-3 to 4-4
picture, 2-5, 2-7
albums, 11-5 to 11-6
copying and pasting, 11-4 to 11-5
downloading files, 10-2 to 10-4
installing, 9-1 to 9-5
manual, 9-5
opening pictures and video clips, 10-4
problems, A-8 to A-10
F-stop, setting, 5-3 to 5-5
FTP, A-17
Full Auto mode, description, 1-9
G
Glare, A-16
Grainy pictures, A-14
H
taking pictures from computer, 13-1 to 13-3
Handling
batteries, 1-5
transferring pictures, 11-6 to 11-8
Image quality, setting, 2-9 to 2-11
Images, see Pictures
Importing photos, 10-9 to 10-10, 11-2, A-10
Index layout, DPOF file, 8-2 to 8-4
Indoor pictures, 5-5
camera, A-1 to A-2
Hardware Wizard, 9-9 to 9-10
Help, EPSON, A-17 to A-18
Hi volume setting, 7-3
Hub, USB, 9-9
Human subjects, 5-13
HyPict
A
B
Information, displaying, 6-12
digital zoom, 4-1
image quality, 2-10
Index 9
Installing
batteries, 1-4
LCD screen
brightness, 7-3
memory card, 1-13
PCMCIA adapter, B-7
software, 9-1 to 9-5
deleting pictures, 6-3 to 6-5
magnifying pictures, 6-8 to 6-9
problems, A-5 to A-6, A-7
specifications, C-3
USB driver, 9-9 to 9-10
Instant playback, 2-18 to 2-19
Internet, A-17
Interval shooting, 3-5 to 3-6
ISO, 5-5 to 5-6, 5-12
taking pictures with, 2-6 to 2-9
too dark, A-6
Leading flash setting, 2-12 to 2-13
Lens
J
aperture settings, 5-5
Lens adapter, B-4
JPEG, 2-9 to 2-10, 10-10 to 10-12, 11-2
L
Lens cap
Landscape
attaching, 1-7 to 1-8
removing, 1-8
Lenses, optional, B-4
Licensing software, A-18
Light metering, 5-9
digital panoramas, 4-3 to 4-4
subject setting, 2-15
Language
incorrect, A-7
setting, 7-5
Layout, DPOF file, 8-2 to 8-4
Index 10
Lighting conditions
bright, 5-12
M
Macintosh
dim, 5-5, 5-13, A-15 to A-16
direct, 5-13
excessive, A-16
fluorescent, 5-7, 5-13
portraits, 5-13
sunset/sunrise, 5-7
capturing screens, 14-9 to 14-10
installing software, 9-4 to 9-5
USB camera events, 10-16
Lights
Macro mode
camera status, 2-3
problems, A-14 to A-15
using, 4-4 to 4-5
photo capture, 2-5, 2-8
Limited warranty, D-4
Lines on pictures, A-16
Live preview, 13-1 to 13-5
Locked pictures, deleting, 6-4
Locking
pictures, 6-5 to 6-6
Low battery power, checking, 2-2
Low light conditions, 5-5, 5-13
Low volume setting, 7-3
Magnifying pictures, 6-8 to 6-9
Manual focus, 4-5 to 4-6
Manuals, using, 4, 9-5
Matrix metering, 5-9
Memory card
dimensions, C-6
formatting, 1-11
full, A-4
A
B
installing, 1-13
problems, A-4, A-7, A-11 to A-12
removing, 1-12
storing print settings, 8-2 to 8-7
uploading images, 14-1 to 14-7
Index 11
Menus
playback, 6-1 to 6-16
Motion
continuous shooting, 3-2 to 3-4
problems, A-6
video clips, 3-1 to 3-2
Shot SETUP, 2-10, 2-13, 2-16
View, 2-6
Messages
Multiple pictures, playing back, 6-2 to 6-3
Multimedia projector, 14-10 to 14-12
EPSON Photo!3, 10-13 to 10-14
Image Expert, 10-4 to 10-5
Print Mark, 8-6
N
Metering method, changing, 5-9
Microphone, 2-17
Military time format, 1-10
Minimum system requirements, C-6 to C-7
Missing menus, A-6
New Hardware Found Wizard, 9-9 to 9-10
Night photos, 5-13
NiMH Power Pak, ordering, 4
NTSC, 14-12
Mode
continuous shooting, 3-2 to 3-4
Full Auto, 1-9
O
interval shooting, 3-5 to 3-6
Manual, 1-9
On and off, powering camera, 2-1
One-step downloading, 10-8
manual focus, 4-5 to 4-6
monochrome, 2-14
Program, 1-9
Opening pictures for printing, 12-2 to 12-3
Optical zoom, 2-5, 2-7, 3-2
Tiff, 2-10
Modem port, Macintosh, 9-7
Monitor, LCD, see LCD screen
Monochrome pictures, taking, 2-14
Index 12
Options
AC adapter, 4, 2-3, B-2 to B-3
Photo capture light, 2-5, 2-8
Photo processing time, C-4
Photo! Print2
batteries, B-2
battery charger, B-2
installing, 9-1 to 9-5
converter lenses, B-4
external flash, A-5
filters, 5-12, B-4
flash, B-5 to B-6
opening memory card pictures, 12-2 to 12-3
opening saved pictures, 12-3
paper size, 12-5
Image Authentication System, B-2, B-8
PCMCIA adapter, B-7 to B-8
tripod, using, B-4
printer settings, 12-6
problems, A-13
Outdoor pictures, 2-15
Overexposed pictures, 5-4, A-16
USB camera event, 10-14
PICT files, 10-12
P
PAL, 14-12
Picture counter, 2-3
Pictures
Panoramic pictures, 4-3 to 4-4
Parts, 1-1
black and white, 2-14
blurry, A-14 to A-15
Pasting pictures into documents, 11-4 to 11-5
Pausing
capturing from computer, 13-1 to 13-5
close-ups, 4-4 to 4-5
converting, 11-2
copying, 11-4 to 11-5
dark, A-15 to A-16
slide show, 6-13
video clip, 6-11
PC serial cable, connecting, 9-6 to 9-7
PCMCIA, A-11, A-12, B-7 to B-8
PCX files, 10-12
A
B
PDF Image Expert manual, 9-5
Index 13
Pictures (continued)
Pictures (continued)
11-7
taking with viewfinder, 2-4 to 2-6
unlocking, 6-5 to 6-6
uploading, 14-1 to 14-7
distorted on computer, A-14
downloading problems, A-13
exporting, 10-10 to 10-13
importing, 11-2
Pictures remaining, incorrect, A-7
Playing back
video clips, 6-9 to 6-12, 14-10 to 14-12
Playing back pictures
incorrect captured area, A-17
light, A-16
locking, 6-5 to 6-6
magnifying, 6-8 to 6-9
as a slide show, 6-12 to 6-16
deleting, 6-3 to 6-5
missing, A-11, A-13
missing sections, A-16
opening saved, 12-3
on a video output device, 14-10 to 14-12
one by one, 6-2
panoramic, 4-3 to 4-4
pasting, 11-4 to 11-5
playing back, 2-18 to 2-19, 6-1 to 6-16
printing, 12-2 to 12-6
problems, A-13 to A-17
problems taking, A-3, A-6
slide shows, 6-12
slow processing, A-4
taking with LCD screen, 2-6 to 2-9
Index 14
Port
Print Mark
error messages, 8-6
using, 8-2 to 8-7
Printing
AUDIO IN on video device, 14-11
AV Out, 14-11
camera serial, 9-7, 9-8
camera USB, 9-9
Macintosh serial, 9-7
PC serial, 9-6
image size, 12-6
settings, A-8 to A-10
USB, 9-9
index of pictures, 12-4
Photo! Print2, 12-4 to 12-6
problems, A-13
Portrait subject setting, 2-15
Portraits, 5-13
saved pictures, 12-3
Power
selecting pictures, 12-4
Problems
AC adapter, 2-3, C-5
battery, see Batteries
camera specifications, C-1
optional AC adapter, B-2 to B-3
problems, A-3
Auto Downloader, A-13
blurry viewfinder, A-4
camera, 10-13 to 10-14, A-3 to A-7
can’t take picture, A-3
color, A-14
CompactFlash memory card, A-11 to A-12
connection, A-8 to A-13
copy and paste, A-10
dark LCD screen, A-6
date and time, A-16
POWER button, 2-1
Power off, setting, 7-1 to 7-2
Power Pak, ordering, 4, B-2
Precautions, safety, 5 to 6
Presentations
converting, 14-7 to 14-10
using camera for, 14-1 to 14-12
Preview, LCD screen, 2-6
A
B
downloading, A-10
Index 15
Problems (continued)
drag and drop, A-10
EPSON Photo!3, 10-13 to 10-14
external flash, A-5
Program mode
description, 1-9
using programmed subject settings, 2-15 to 2-16
Projector, 14-10 to 14-12
flash, A-4 to A-5
focus, A-14 to A-15
importing, A-10
Q
LCD screen, A-5 to A-6
lens, A-6
Quick playback and delete, 2-18 to 2-19
QuickTime
memory card, A-4
installing, 9-1 to 9-5
Movie problems, A-12
movies, 10-3
missing pictures, A-11
overexposed pictures, A-16
picture, A-13 to A-17
power, A-3
R
Print Mark, 8-6
settings, A-6
slow image processing, A-4
software, A-8 to A-13
sound, A-8
Rechargeable batteries, 1-2 to 1-3
Recordings, audio
adding, 2-17 to 2-18, 6-6 to 6-7
converting, 14-2 to 14-5
status display panel, A-5, A-7
TWAIN, A-11
underexposed pictures, A-15 to A-16
uploading, A-12
deleting, 6-8
downloading to computer, 10-2 to 10-4, 10-6 to 10-7
playing back, 2-18 to 2-19, 6-7 to 6-8
playing in slide show, 6-14
video clips, A-7, A-12 to A-13, A-17
Processing time, A-4, C-4
uploading, 14-6 to 14-7
Recordings, video see Video clip
Index 16
Red-eye reduction, 2-12, 5-13
Reflected light, A-16
Sequences
capturing, 3-2 to 3-4
Remaining pictures, 2-3
Removing memory card, 1-12
Resolution, 2-9 to 2-11
Restarting
slide show, 6-13
video clip, 6-11
Reversing video clip playback, 6-10
Rewinding video clips, 6-10
Rotating slide show pictures, 6-15 to 6-16
Serial cable, connecting, 9-6 to 9-8
Serial interface, C-2
Series, fixing condition settings, 5-10 to 5-12
Settings
alert sounds, 7-2
Auto Downloader, 10-7 to 10-9
broadcast signal, 14-12
S
Safety
instructions, 5 to 6
camera volume, 7-3
specifications, C-3
color/black and white, 2-14
date and time, 1-10 to 1-11, 7-4
default USB camera events, 10-14
display panel, 2-2 to 2-4
exposure, 5-1 to 5-5
Screen captures
Macintosh, 14-9 to 14-10
Windows, 14-7 to 14-9
Screen, LCD see LCD screen
Self timer, using, 2-13 to 2-14, 13-3 to 13-5
Sensitivity
flash, 2-11 to 2-13
A
B
focus, 4-5 to 4-6
image quality, 2-9 to 2-11
language, 7-5, A-7
problems, A-6
setting, 5-5 to 5-6, 5-12
LCD brightness, 7-3
Index 17
Settings (continued)
Shutter
adjusting speed, 5-3 to 5-5
macro mode, 4-4 to 4-5
metering, 5-9
monochrome, 2-14
click sound, 7-2
panoramic pictures, 4-3 to 4-4
problems, A-6
programmed subject settings, 2-15 to 2-16
sensitivity, 5-5 to 5-6
locking settings, 2-5, 2-8
predefined exposure adjustments, 5-2 to 5-3
problems, A-4
setting delay, 2-13
shutter speed and aperture, 5-3 to 5-5
time and date, 7-4
USB, 10-14 to 10-16
USB camera events, 10-14 to 10-16
user mode, 1-9
snapping, 2-5, 2-8
Signal, broadcast, 14-12, A-8
Single-step downloading, 10-8
Size
viewfinder, 2-5
camera, C-1
white balance, 5-6 to 5-9
Shady conditions, 5-13
Shot SETUP menu, 2-10, 2-13, 2-16
Sleep mode, 2-7, 7-1 to 7-2
Index 18
Slide show
excluding pictures, 6-14
Sound
adding, 2-17 to 2-18, 6-6 to 6-7
manual playback, 6-13
pausing, 6-13
playing pictures, 6-12 to 6-16
playing sounds, 6-14
restarting, 6-13
camera alerts, 7-2
converting, 14-2 to 14-5
deleting, 6-8
downloading to computer, 10-2 to 10-4, 10-6 to 10-7
in interval shots, 3-6
rotating pictures, 6-15 to 6-16
setting speed, 6-13
in video clips, 3-2
shuffling pictures, 6-13
stopping, 6-13
Slow shutter, A-4
playing in slide show, 6-14
problems, A-8
Slow synchronized flash, 2-12, 5-13
Slow transfer, A-10
uploading, 14-6 to 14-7
Software
Specifications
File Converter, 14-2 to 14-5
included on CD-ROM, 3
installing, 9-1 to 9-5
AC adapter, C-5
battery charger, C-5
environmental, C-3
memory card, C-6
photographic, C-3 to C-4
physical dimensions, C-1
power, C-1
licensing, A-18
opening with USB camera events, 10-14
optional Image Authentication System, B-8
Photo! Print2, 12-1 to 12-6
problems, A-8 to A-13
A
B
safety, C-3
support, A-18
technical, C-2
Sports subject setting, 2-15
Spot metering, 5-9, 5-13
Index 19
Standard image quality, 2-9
Standard layout, DPOF file, 8-2 to 8-4
Status display panel
problems, A-5, A-7
reading, 2-2 to 2-4
Status light, camera, 2-3
Storing camera, A-2 to A-3
Strap, attaching, 1-6 to 1-7
Subject
freezing, 2-12 to 2-13
portraits, 5-13
settings, 2-15 to 2-16
Sunlight
System requirements
Macintosh, C-7
Windows, C-6
T
Taking pictures
using the flash, 2-11 to 2-13
with the LCD screen, 2-6 to 2-9
with the timer, 2-13 to 2-14
Technical specifications, C-2
Technical support, EPSON, A-17 to A-18
Telephoto
afternoon, 5-13
optional lenses, B-4
bright, 5-12
cloudy conditions, 5-12
morning, 5-13
shady, 5-13
Television, 14-10 to 14-12, A-8
Thumbnails, playing back, 6-2 to 6-3
Tiff
sunrise/sunset, 5-7, 5-12
Super fine image quality, 2-10
Support
files, 10-10 to 10-12, 11-2
problems, A-4, A-6
setting, 2-10
EPSON, A-17 to A-18
software, A-18
Time and date
problems, A-7, A-16
S-Video, A-8
setting, 1-10 to 1-11, 7-4
Time lapse pictures, 3-5 to 3-6
Timer, using, 2-13 to 2-14, 3-4, 13-3 to 13-5
Index 20
Trailing flash setting, 2-12 to 2-13
Transfer rate, 9-7, 9-8, A-10
Transferring
USB
camera events, 10-14 to 10-16
camera port, 9-9
error message, A-8 to A-10
problems, A-11, A-13
hub, 9-9
one-step downloading, 10-8
problems, A-8 to A-10, A-12
too slow, A-10
using PCMCIA adapter, B-8
Tripod, attaching, B-4
Troubleshooting, A-3 to A-17
Turning camera on/off, 2-1
TV, 14-10 to 14-12, A-8
TWAIN
V
VCR, 14-10 to 14-12, A-8
Verifying pictures, B-8
acquiring photos, 10-9 to 10-10
installing, 9-1 to 9-5
problems, A-11
Two-step shutter, 2-5, 2-8
U
Uncompressed Tiff, 2-10
Underexposed pictures, 5-4, A-15 to A-16
Unlocking pictures, 6-5 to 6-6
Unpacking the camera, 1-1
Uploading
A
B
files, 14-6 to 14-7
problems, A-12
Index 21
Video clip
changing playback speed, 6-10
Voice recordings
adding, 2-17 to 2-18, 6-6 to 6-7
deleting, 6-11 to 6-12
fast forwarding, 6-10
pausing, 6-11
converting, 14-2 to 14-5
deleting, 6-8
downloading to computer, 10-2 to 10-4, 10-6 to 10-7
in video clips, 3-2
playing back, 6-9 to 6-12
playing backward, 6-10
playing forward, 6-10
playing back, 2-18 to 2-19, 6-7 to 6-8
playing in slideshow, 6-14
problems, A-5, A-7, A-12 to A-13
recording, 3-1 to 3-2
restarting, 6-11
Volume, setting, 7-3
W
rewinding, 6-10
sideways, A-17
Waking camera, 2-7, 6-13
Warranty, D-4
VIDEO IN port on video device, 14-11
Video mode, A-8
White balance
Video output, 14-10 to 14-12
Videotaping pictures, 14-12
View menu, 2-6
adjusting, 5-6 to 5-9
fixed, 5-7
problems, A-6
Viewfinder
user-defined setting, 5-8 to 5-9
Wide angle, 2-5, 2-7, 3-2, 4-4
optional lenses, B-4
adjusting focus, 1-14
settings menu, 2-5
taking pictures with, 2-4 to 2-6
Index 22
Windows
capturing screens, 14-7 to 14-9
installing software, 9-2 to 9-3
installing USB driver, 9-9 to 9-10
system requirements, C-6
USB camera events, 10-15
USB problems, A-12
World Wide Web, A-17
Z
Zoom
digital, 4-1 to 4-3
optical, 2-5, 2-7, 3-2
playback mode, 6-8 to 6-9
A
B
Index 23
|