Eizo Nanao Car Video System CG301W User Manual

Important  
PRECAUTIONS ..................................................... 3  
Please read this User’s Manual carefully to  
familiarize yourself with safe and effective  
usage.  
The latest User's Manual is  
available for download from our site:  
How to Setup  
Please read the Setup Manual (separate volume)  
 
PRECAUTIONS  
PRECAUTIONS  
IMPORTANT!  
This product has been adjusted specifically for use in the region to which it was originally shipped.  
If operated outside the region to which it was originally shipped, the product may not perform as  
stated in the specifications.  
This product is designed for use in Japan only and cannot be used in any other countries.  
To ensure personal safety and proper maintenance, please read this section and the caution statements  
on the unit (refer to the figure below).  
[Location of the Caution Statements]  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or makes  
strange noises, disconnect all power connections immediately and contact  
your dealer for advice.  
Attempting to use a malfunctioning unit may result in fire, electric shock, or  
equipment damage.  
Do not open the cabinet or modify the unit.  
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers may  
result in fire, electric shock, or equipment damage.  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet or  
spillage into the cabinet may result in fire, electric shock, or equipment damage. If an  
object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit  
checked by a qualified service engineer before using it again.  
 
PRECAUTIONS  
WARNING  
Place the unit at the strong and stable place.  
A unit placed on an inadequate surface may fall and result in injury or equipment  
damage.  
If the unit falls, disconnect the power immediately and ask your dealer for advice.  
Do not continue using a damaged unit. Using a damaged unit may result in fire or  
electric shock.  
Set the unit in an appropriate location.  
Not doing so may result in fire, electric shock, or equipment damage.  
Do not place outdoors.  
Do not place in the transportation system (ship, aircraft, trains, automobiles,  
etc.)  
Do not place in a dusty or humid environment.  
Do not place in a location where the steam comes directly on the screen.  
Do not place near heat generating devices or a humidifier.  
• Do not place in an inflammable gas environment.  
To avoid danger of suffocation, keep the plastic packing bags away from  
babies and children.  
Use the enclosed power cord and connect to the standard power outlet of your  
country.  
Be sure to remain within the rated voltage of the power cord.Not doing so may result  
in fire or electric shock.  
Power supply: 100-120/200-240 Vac, 50/60 Hz  
To disconnect the power cord, grasp the plug firmly and pull.  
Tugging on the cord may damage and result in fire or electric shock.  
OK  
The equipment must be connected to a grounded main outlet.  
Not doing so may cause in fire or electric shock.  
Use the correct voltage.  
The unit is designed for use with a specific voltage only. Connection to another  
voltage than specified in this User's Manual may cause fire, electric shock, or  
equipment damage.  
Power supply: 100-120/200-240 Vac, 50/60 Hz  
Do not overload your power circuit, as this may result in fire or electric shock.  
Handle the power cord with care.  
Do not place the cord underneath the unit or other heavy objects.  
Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord may  
result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
PRECAUTIONS  
WARNING  
When attaching an arm stand, please refer to the user's manual of the arm  
stand and install the unit securely.  
Not doing so may cause the unit to come unattached, which may result in injury or  
equipment damage. When the unit is dropped, please ask your dealer for advice.  
Do not continue using a damaged unit. Using a damaged unit may result in fire or  
electric shock. When reattaching the tilt stand, please use the same screws and  
tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or  
mouth.  
If any part of the skin or body comes in direct contact with the panel, please wash  
thoroughly. If some physical symptoms result, please consult your doctor.  
Lamps contain mercury, dispose according to local, state or federal laws.  
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit with  
the cord attached is dangerous. It may result in injury.  
Carry or place the unit according to the correct specified methods.  
• When carrying the unit, grasp and hold firmly as shown in the illustration below.  
• Do not unpack or carry the unit only by a single person, since the large size unit  
is so heavy.  
Dropping the unit may result in injury or equipment damage.  
Do not block the ventilation slots on the cabinet.  
Do not place any objects on the ventilation slots.  
Do not install the unit in a closed space.  
Do not use the unit laid down or upside down.  
Blocking the ventilation slots prevents proper airflow and may result in fire, electric  
shock, or equipment damage.  
Do not touch the plug with wet hands.  
Doing so may result in electrical shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a problem.  
Periodically clean the area around the plug.  
Dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric shock.  
If you plan to leave the unit unused for an extended period, disconnect the  
power cord from the wall socket after turning off the power switch for the  
safety and the power conservation.  
PRECAUTIONS  
Notice for this monitor  
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a  
monitor in lower brightness is recommended.  
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may  
appear on the LCD panel, this is not malfunction. Percentage of effective pixels : 99.9994% or higher.  
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker,  
please contact your dealer.  
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There  
will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the  
screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints.  
When the screen image is changed after displaying the same image for extended periods of time, an  
afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended  
periods of time.  
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew  
condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until  
dew condensation disappears, otherwise it may cause some damages to it.  
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in  
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.  
To use the monitor comfortably  
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to  
the environmental conditions.  
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.  
1. Introduction  
1. Introduction  
Thank you very much for choosing an EIZO Color Monitor.  
1-1. Features  
29.8 inch class wide screen format LCD  
Wide color gamut of 97% of Adobe RGB  
WQXGA (2560 × 1600) display compliant  
HDCP signal (SIGNAL2) compliant  
Dual-display compliant by introducing dual-input system (DVI-D × 2 connectors)  
DVI digital input (TMDS) compliant  
Horizontal scan frequency: 26 - 100 kHz  
Vertical scan frequency: 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 - 71 Hz)  
Resolution: 2560 dots × 1600 lines  
Compatible with frame synchronization mode*1 (29.5 - 30.5Hz, 59 - 61Hz)  
Smoothing (soft - sharp) function  
The provided "ColorNavigator" calibration software enables you to calibrate monitor  
characteristics and generate ICC profiles (for Windows) and Apple ColorSync profiles (for  
Macintosh) (refer to the EIZO LCD Utility Disk)  
FineContrast modes, to select the most suitable mode for screen display  
Height adjustable stand  
Portrait/Landscape display available (rotate 90 degrees clockwise)  
Attaching the "Adjustment Certificate" to describe the grayscale and uniformity characteristics of  
the monitor individually  
Monitor hood attached  
Color Vision Deficiency Simulation Software "UniColor Pro" supported  
(This software can be downloaded from http://www.eizo.com)  
*1 Compatible frequency differs depending on your graphics board.  
Tips  
This monitor supports the Portrait/Landscape display. This function allows you to change the  
orientation of the Adjustment menu when using the monitor screen in vertical display position.  
If you use the monitor with "Portrait" position, the setting may be required to change  
depending on the graphics board used in your PC. Refer to the manual of the graphics board for  
details.  
 
1. Introduction  
1-ꢀ. Buttons and Indicators  
Adjustment menu  
(ScreenManager ®*)  
Buttons  
1. Input Signal Selection button  
2. Mode button  
3. Enter button  
4. Control buttons (Left, Down, Up, Right)  
5. Power button  
6. Power indicator  
Indicator status  
Operation status  
Blue  
The screen is displayed  
Flashing blue (2 times for each) When the timer is set for ColorNavigator, notifies that a recalibration is  
required (for CAL mode or EMU mode)  
Orange  
Off  
Power saving  
Power off  
*ScreenManager® is an EIZO's nickname of the Adjustment menu.  
 
1. Introduction  
1-ꢁ. Utility Disk  
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the  
disk contents and the overview of the application software programs.  
Disk contents and software overview  
The disk includes software programs for adjustment and User’s Manual. Refer to "Readme.txt" or the  
"read me" file on the disk for software startup procedures or file access procedures.  
Item  
Overview  
For Windows For Macintosh  
A “Readme.txt” or “read me” file  
ColorNavigator  
An application software for calibrating monitor  
characteristics and generating ICC profiles (for Windows)  
and Apple ColorSync profiles (for Macintosh).  
(A PC must be connected to the monitor with the supplied  
USB cable.) Refer to the descriotion later.  
Screen Adjustment Monitor pattern display software used when adjusting the  
Utility image of the analog input signal manually.  
Screen adjustment Used when adjusting the image of the analog signal input  
pattern files  
manually. If the Screen Adjustment Utility is not applicable  
to your PC, use this pattern files to adjust the image.  
User’s Manual (PDF file)  
To use ColorNavigator  
Refer to the corresponding User's Manual on the CD-ROM disk in order to install and use the software.  
When using this software, you will need to connect a PC to the monitor with the supplied USB cable.  
For more information refer to the "2-2. Making Use of USB (Universal Serial Bus)" (page 12).  
 
2. Installation  
ꢀ. Installation  
ꢀ-1. Environmental Settings  
Depending upon your operating environment, it may be necessary to set the frequency that corresponds  
to your graphics board. If you install it for the first time or change environment, set the monitor.  
NOTE  
Factory default settings are for single display mode and Dual Link.  
We recommend using ColorNavigator with single display mode in landscape orientation.  
Refer to the manual of the graphics board.  
These environment described below can be set regardless of whether or not the computer is running.  
Displaying Two Screens Simultaneously  
It is possible to display two screens on a single monitor at the same time by using one graphics board  
with DVI-D2 type output or two graphics boards with DVI-D output on the same computer.  
Dual display with 1200 × 1600 resolution is the maximum display size.  
How to set  
1
2
Connect the [SIGNAL1] signal input connector and the computer using the  
[DD200DL-BK] signal cable.  
Connect the [SIGNAL2] signal input connector and the computer using the  
[FD-C39] signal cable.  
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.  
FD-C39  
DD200DL-BK  
Connectors on the PC  
Signal cable  
Connectors on the  
monitor  
SIGNAL1  
Signal cable (DD200DL-BK)  
SIGNAL2  
Signal cable (FD-C39)  
10  
 
2. Installation  
3
4
Hold down the  
button and press the  
button.  
The <Display Setup> menu will appear in the middle of the screen. Press the  
buttons to select "Dual Display" and then press  
.
Inputting 10 bit Color Signal  
Some graphics boards support 10 bit color signal input.  
How to set  
1
Connect the [SIGNAL1] signal input connector and the computer using the  
[DD200DL-BK] signal cable.  
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.  
Connectors on the PC  
Signal cable  
Connectors on the monitor  
SIGNAL1  
Signal cable (DD200DL-BK)  
2
3
Hold down the  
button and press the  
button.  
The <Display Setup> menu will appear in the middle of the screen. Press the  
buttons to select "Single Display" and then press  
The <Signal Selection> menu will appear. Press the  
.
4
buttons to select "Single  
Link/10bit", and press  
.
11  
   
2. Installation  
ꢀ-ꢀ. Making Use of USB (Universal Serial Bus)  
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC  
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily  
connected.  
Required system environment  
PC equipped with USB ports or another USB hub connected to the USB compliant PC  
Windows 2000/XP/Vista // Mac OS 9.2.2 and Mac OS X 10.2 or later  
USB Cable (MD-C93, enclosed)  
NOTE  
The USB hub function may not work properly depending on the PC or peripherals. Please consult the  
manufacturer of each device about the USB support.  
Using the USB Rev. 2.0 compatible PC or peripherals is recommended.  
If the monitor is in the power saving mode, or if the monitor is connected to the power outlet with the  
monitor turned off, all the devices connected to the USB ports (upstream and downstream) work.  
Therefore, power consumption of the monitor varies with connected devices even in the power saving  
mode.  
The followings are procedures for the Windows2000/XP/Vista and Mac OS.  
Connecting to the USB HUB  
1
2
Connect the monitor to the PC with the signal cable first, then turn on the PC.  
Connect the upstream port of the monitor to the downstream port of the  
USBcompliant PC or another hub by using the USB cable.  
After connecting the USB cable, the USB function can be set up automatically.  
3
After setting up, the monitor's USB hub is available for connecting USB  
compliantperipherals to the downstream ports of the monitor.  
Upstream  
Downstream  
1ꢀ  
   
3. Screen Adjustment and Settings  
ꢁ. Screen Adjustment and Settings  
ꢁ-1. Basic Operation and Functions  
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast  
mode easily.  
Adjustment menu (ScreenManager®)  
Enter button  
Power button  
FineContrast Menu  
Control buttons  
(Left, Down, Up, Right)  
Mode button  
NOTE  
The Adjustment menu and the FineContrast menu cannot be displayed at the same time.  
1
Entering the ScreenManager  
Press  
once to display the main menu of the ScreenManager.  
2
Making Adjustments and Settings  
1. Select the desired sub menu icon using  
and press  
. The sub menu appears.  
. The setting menu appears.  
save the settings.  
2. Use  
3. Use  
to select the desired setting icon and press  
to make all required adjustments and press  
3
Exiting the ScreenManager  
1. To return to the main menu, select the <Return> icon or press  
twice, followed by  
.
2. To exit the ScreenManager, select <Exit> icon or press  
twice, followed by .  
Tips  
•Double clicking  
at any time also exits the ScreenManager menu.  
1ꢁ  
 
3. Screen Adjustment and Settings  
Functions  
The following table shows all the ScreenManager's adjustment and setting menus.  
Main menu  
Sub menu  
Reference  
Screen  
Smoothing  
Brightness  
Temperature  
Gamma  
Saturation  
Hue  
1
Color(Custom)  
*
Gain  
6 Colors  
Reset  
PowerManager  
Others  
DVI DMPM  
OFF  
Screen Size  
Border Intensity  
Input Signal  
Off Timer  
Set the input signal selection of automatic or manual.  
Set the monitor's Off Timer to on or off.  
Set the monitor's beeper to on or off.  
(Beeper settings.)  
Beep  
Menu Settings Menu Size  
Change the size of the menu.  
Menu Position  
Adjust the menu position.  
Menu Off Timer  
Translucent  
Orientation  
Set the menu displaying time.  
Set the transparency of the background.  
Set the orientation of the Adjustment menu.  
Make non-light for blue lighting when the screen is  
displayed (Power Indicator Setting).  
Return to the factory Default settings.  
Power Indicator  
Reset  
Information  
Language  
Information  
Review the ScreenManager's settings, model name,  
2
serial number and usage time.  
*
English, German, French,  
Spanish, Italian, Swedish,  
Chinese(Simplified),  
Select the ScreenManager's language.  
Chinese(Traditional) and Japanese  
*
1
2
The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The above table shows the sub  
menus when the "Custom" mode is selected (See "3-2. Color Adjustment").  
*
Due to the inspection on the factory, the usage time may not "0 hour" at shipping.  
1ꢂ  
3. Screen Adjustment and Settings  
ꢁ-ꢀ. Color Adjustment  
Simple Adjustment [FineContrast mode]  
This function allows you to select the best display mode for monitor brightness, etc.  
To select FineContrast mode  
-/$%  
Directly pressing  
allows you to select the best suited mode for screen display from 4 FineContrast  
modes; Custom, sRGB, EMU, and CAL.  
Press  
to exit the menu.  
->Custom -> sRGB -> EMU -> CAL  
Tips  
•The Adjustment menu and the FineContrast menu cannot be displayed at the same time.  
FineContrast Menu  
[EX.]Custom  
Enter button  
Power button  
Current Mode  
Settings status  
of Brightness,  
Temperature and  
Gamma  
Mode button  
Control buttons  
FineContrast Mode  
Selectable FineContrast modes are as follows.  
Mode  
Purpose  
To adjust the color settings according to your preference  
Custom  
sRGB  
EMU  
To display the screen images based on those original colors (ex. over the Internet).  
The mode only for calibration software  
CAL  
Color Adjustment of the Mode Settings  
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select  
the desired function icon with  
and adjust with  
. (Setting(s) of <Temperature> and/or  
<Gamma> is defined as standard default in some modes.  
NOTE  
"EMU" mode and "CAL" mode can be adjusted only by Calibration Software.  
1ꢃ  
   
3. Screen Adjustment and Settings  
Advanced Adjustments[Adjustment menu]  
Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the  
Adjustment menu.  
Adjustment Items  
The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast  
mode.  
"
": Settable/Adjustable " - ": Fixed at the factory  
FineContrast Mode  
Icons  
Functions  
Custom  
sRGB  
EMU  
CAL  
Brightness  
*
Temperature  
*
Gamma  
*
Saturation  
Hue  
Gain  
6 colors  
Reset  
*
These settings can be also adjusted on the FineContrast menu.  
NOTE  
Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allow  
the monitor to warm up for at least 30 minutes before making adjustments.)  
The values shown in percentages represent the current level within the specific adjustment. They are  
available only as a reference tool. (To create a uniform white or black screen, the percentages for each  
will probably not be the same.)  
1ꢄ  
3. Screen Adjustment and Settings  
Adjustment Contents  
Menu  
Brightness  
Function Descriptions  
To set the brightness of the screen  
Tips  
Adjustable range  
0~100%  
• The values shown in the “%” are available only as reference.  
Temperature  
To set the color temperature  
4000K~10000K  
in 500 K increments (including 9300 K)  
Tips  
• The values shown in the Kelvin are available only as a reference tool.  
• While color temperature is adjusted, <Gain> is adjusted automatically according to the  
color temperature.  
• Setting the temperature under 4000 K or over 10000 K invalidates the color  
temperature setting. (The color temperature's setting turns "OFF".)  
• Setting the <Gain> invalidates the <Temperature> adjustment.  
Gamma  
To set the gamma value  
1.8~2.6  
Saturation  
To change the saturation  
-100~100  
Setting the minimum level (-100) turns the  
image to the monochrome.  
NOTE  
• The <Saturation> adjustment may cause undisplayable color tone.  
Hue  
To change the flesh color, etc.  
-100~100  
NOTE  
• Using <Hue> adjustment may not obtain proper tone reproduction.  
Gain  
To change each color  
(red, green and blue)  
0~100%  
By adjusting the red, green and blue color  
tones for each mode, custom colors can be  
defined. Display a white or gray background  
image and adjust the <Gain>.  
Tips  
• The values shown in the “%” are available only as reference.  
• The <Temperature> setting invalidates this setting. The <Gain> setting varies with  
color temperature.  
6 colors  
Reset  
To adjust <Saturation> and <Hue> in  
each color (Red, Yellow, Green, Cyan, Saturation: -100 ~ 100  
Blue and Magenta)  
Hue: -100 ~ 100  
To reset the color settings of the selected FineContrast mode to the default settings.  
1ꢅ  
 
3. Screen Adjustment and Settings  
ꢁ-ꢁ. Power-save Setup  
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.  
NOTE  
Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting  
the monitor from the power supply is recommended to save energy completely.  
Even if the monitor is in a power saving mode, USB compliant devices function when they are  
connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power  
consumption of the monitor will change according to the connected devices even if the monitor is in a  
power saving mode.  
This monitor complies with the "DVI DMPM"  
[Procedure]  
1. Set the PC's power saving settings.  
2. Select "DVI DMPM" from the <PowerManager> menu.  
[Power Saving System]  
The monitor enters the power saving mode in five seconds in connection with the PC setting.  
PC  
Operation  
Monitor  
Operation  
Power Indicator  
Blue  
Power saving  
Power saving  
Orange  
[Power Resumption Procedure]  
Operate the mouse or keyboard to return to a normal screen.  
1ꢆ  
   
3. Screen Adjustment and Settings  
ꢁ-ꢂ. Off Timer  
The off timer function causes the monitor to automatically enter a power off state after a predetermined  
amount of time has lapsed. This function was created to reduce Afterimage characteristics that are  
particular to LCD monitors when the monitor screen is left on for a long period without use.  
[Procedure]  
1. Select <Off Timer> in the ScreenManager <Others> menu.  
2. Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23  
hours).  
[Off Timer System]  
PC  
Monitor  
Power Indicator  
Operating time (1H - 23H)  
Last 15 min. in operating time  
Operating time expired  
Operation  
Blue  
Blue Flashing  
Off  
Advance Notice *1  
Power Off  
*1  
When  
is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension  
of operation time can be set without limitation.  
[Power Resumption Procedure]  
Press  
to return a normal screen.  
NOTE  
•The off timer function works while the PowerManager is active, but there is no advance notice before  
the monitor's power is turned off.  
ꢁ-ꢃ. Locking the Settings  
Use the "Adjustment Lock" function to prevent any accidental changes.  
Buttons that can be locked  
(Enter button) / Adjustments/settings using Adjustment menu  
(Mode button)  
-/$%  
+
Display setup (P.11)  
Buttons that cannot be locked  
(Input Signal Selection button)  
(Power button)  
[How to lock]  
1. Press  
to turn off the unit.  
-/$%  
2. Press  
again while pressing  
.
The screen is displayed with the adjustment lock.  
[How to unlock]  
1. Press  
to turn off the unit.  
-/$%  
2. Press  
again while pressing  
.
The screen is displayed with the adjustment lock released.  
1ꢇ  
   
3. Screen Adjustment and Settings  
ꢁ-ꢄ. Power Indicator Setting  
Light off the power indicator. This function is available for the multiple panels settings.  
[Procedure]  
1. Select <Power Indicator> in the ScreenManager <Others> menu.  
2. Select "Disable".  
ꢁ-ꢅ. Displaying Lower Resolutions  
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the  
<Others> menu enables to change the screen size.  
NOTE  
When "Single Link/10bit" is selected on the <Signal Selection> menu and 10bit color signal is input  
(page 11), the <Screen Size> cannot be selected. The screen is displayed in the "Normal" mode.  
1
Enlarge the screen size when displaying a low resolution.  
Select the <Screen Size>.  
Select the <Screen Size> in the <Others> menu and select the screen size by using  
and  
.
Mode  
Function  
Full  
Displays the picture on the screen in full, irrespective of the picture's resolution.  
Since the verticalresolution and the horizontal resolution are enlarged at different  
rates, some images may appeardistorted.  
Enlarged  
Normal  
Displays the picture on the screen in full, irrespective of the picture's resolution.  
Since the vertical resolution and horizontal resolution are enlarged at same rates,  
some horizontal or vertical image maydisappear.  
Displays the picture at the actual Screen resolution.  
Example: Displaying Image size 1280 × 1024 when setting <Single Display> in <Display Setup>.  
Full (Default Setting)  
Enlarged  
Normal  
(1280 × 1024)  
(2560× 1600)  
(2000 × 1600)  
2
Smooth the blurred texts of the enlarged screen.  
Switch the <Smoothing> setting.  
When a low-resolution image is displayed in the “Full” or “Enlarged” mode, the characters or  
lines of the displayed image may be blurred.  
Select the suitable level from 1 - 5 (Soft - Sharp).  
Select <Smoothing> in the <Screen> menu and adjust by using the right and left switches.  
NOTE  
•Smoothing setting may not be required depending on the display resolution. (You cannot  
choose the smoothing icon.  
ꢀ0  
   
3. Screen Adjustment and Settings  
3
Set the brightness of the black area surrounding the displayed image.  
Set the <Border Intensity>.  
In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usually black. Select  
<BorderIntensity> in the <Others> menu and adjust by using  
.
Border  
ꢁ-ꢆ. Setting the Orientation of the Adjustment Menu  
The orientation of the Adjustment menu can be changed.  
[Procedure]  
1. Select <Menu Settings> in the ScreenManager <Others> menu.  
2. Select <Orientation> in the <Menu Settings> menu.  
3. Use  
to select between "Portrait" and "Landscape".  
4. Turn the monitor screen 90° in clockwise direction.  
NOTE  
Be sure to turn the monitor screen after pulling up the screen to the uppermost position of the stand  
and setting the screen tilted upward.  
Tips  
If you use the monitor with "Portrait" position, the setting may be required to change depending on  
the graphics board used in your PC. Refer to the manual of the graphics board for details.  
ꢁ-ꢇ. Displaying EIZO Logo  
When switching on the power button on the front control panel, the EIZO logo is displayed for a while.  
If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)  
[To undisplay]  
1. Press  
to turn off the unit.  
2. Press  
again while pressing  
.
The EIZO logo does not appear on the screen.  
[To display]  
1. Press  
to turn off the unit.  
2. Press  
again while pressing  
.
The EIZO logo appear on the screen.  
ꢀ1  
   
4. Troubleshooting  
ꢂ.Troubleshooting  
If a problem still remains after applying the suggested remedies, contact your local dealer.  
•No-picture problems : See No.1 - No.2  
•Imaging problems : See No.3 - No.9  
•Other problems : See No.10 - No.12  
•USB problems : See No.13 - No.14  
Problems  
Possible cause and remedy  
1.No picture  
Check whether the power cord is connected correctly. If  
the problem persists, turn off the monitor, and then turn  
it on again a few minutes later.  
Power indicator does not light.  
Press  
.
Power indicator is lighting blue.  
Set each RGB adjusting value in <Gain> to higher  
level.(page 17).  
Power indicator is lighting orange.  
Switch the input signal with  
.
Operate the mouse or keyboard.  
Turn on the PC.  
2.The message below appears.  
This message appears when the signal is not input  
correctly even when the monitor functions properly.  
This message appears when no signal is input.  
The message shown left may appear, because some  
(This is displayed for about 40 seconds)  
PCs do not output the signal soon after power-on.  
Check whether the PC is turned on.  
*
Check whether the signal cable is connected properly.  
Switch the input signal with  
.
In Dual Display mode, the display of the error message  
*
is shown by  
or  
.
The message below shows that the input signal is out of  
the specified frequency range. (Such signal frequency is  
displayed in red.)  
Reboot the PC.  
Select an appropriate display mode using the graphics  
board’s utility. Refer to the manual of the graphics board  
for details.  
Example:  
fD:  
fH:  
fV:  
Dot Clock  
Horizontal Frequency  
Vertical Frequency  
*
In Dual Display mode, the display of the error message  
*
is shown by  
or  
.
3.Characters are blurred.  
Adjust using <Smoothing> (page 20).  
4.The screen is too bright or too dark.  
Adjust <Brightness>. (The LCD monitor backlight has a  
fixed life span. When the screen becomes dark or begins  
to flicker, contact your local dealer.)  
ꢀꢀ  
 
4. Troubleshooting  
Problems  
Possible cause and remedy  
5.Afterimages appear.  
Use a screen saver or off timer function for a long-time  
image display.  
Afterimages are particular to LCD monitors. Avoid  
displaying the same image for a long time.  
6.Green/red/blue/white dots or defective dots remain on the This is due to LCD panel characteristics and is not a  
screen. failure.  
7.Interference patterns or fingerprints remain on the screen. Leave the monitor with a white screen or a black screen.  
The symptom may disappear.  
8.Noise appears on the screen.  
When entering the signals of HDCP system, the normal  
images may not be displayed immediately.  
9.The display image is appeared in lengthwise.  
Check whether the kind of cables connected with the  
monitor and the PC.  
10.The <Smoothing> icon on the Adjustment menu  
<Screen> cannot be selected.  
Smoothing setting may not be required depending on the  
display resolution. (You cannot choose the smoothing  
icon.  
11.The Main menu of Adjustment menu does not start.  
12.The FineContrast mode is not displayed.  
Check for Adjustment Lock function (page 19).  
Check for Adjustment Lock function (page 19).  
13.PC is hung up. / The peripherals connected to the  
downstream ports do not operate.  
• Check that the USB cable is correctly connected.  
• Check the downstream ports by connecting the  
peripherals to other downstream ports. If the problem is  
solved by doing this, contact an EIZO dealel (For details,  
refer to the manual of the PC).  
Try executing the following method.  
•Restarting the PC  
•Connecting the PC and peripherals directly  
•If the problem is solved by doing this, contact an EIZO  
dealer.  
14.USB function cannot be setup.  
• Check that the USB cable is correctly connected.  
• Check that the PC and OS are USB compliant (For  
verification of USB support, consult the manufacturer of  
each system).  
• Check the PC's BIOS setting for USB (For details, refer to  
the manual of the PC).  
ꢀꢁ  
5. Reference  
ꢃ. Reference  
ꢃ-1. Attaching an Arm  
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the  
LCD monitor.  
NOTE  
When attaching an arm or stand, follow the instructions of their user’s manual.  
When using another manufacturer’s arm or stand, confirm the following in advance and select one  
conforming to the VESA standard. Use M4 × 12 mm screws supplied with the monitor.  
- Clearance between the screw holes: 100 mm × 100 mm  
- Thickness of plate: 2.6 mm  
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as  
cables.  
Attach an arm or stand to meet the following tilt angles of the monitor.– Up 45 degrees, down 45  
degrees (Within operating range)  
Connect the cables after attaching an arm.  
Setup Procedure  
1
2
3
Lay the LCD monitor on a soft cloth spread over on a stable surface with the  
panel surface facing down.  
Remove the stand. (Prepare a screwdriver.)  
Unscrew the four screws securing the unit and the stand with the screwdriver.  
Attach the monitor to the arm or stand.  
Secure the stand to the monitor with four screws using a screwdriver.  
ꢀꢂ  
 
5. Reference  
ꢃ-ꢀ. Cleaning  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.  
NOTE  
Never use thinner, benzene, alcohol, abrasive cleaners, or other strong solvents, as these may cause  
damage to the cabinet or LCD panel.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not  
spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.)  
LCD Panel  
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.  
If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening  
part of a cloth with water to enhance its cleaning power.  
ꢀꢃ  
 
5. Reference  
ꢃ-ꢁ. Specifications  
LCD Panel  
76 cm (29.8 inch), TFT color LCD panel  
Surface treatment : Anti-Glare Hard Coating  
Surface hardness : 3H  
Response Time : 12ms  
(CR: 10 or more)  
Horizontal : 178°, Vertical : 178°  
Viewing Angle  
Dot Pitch  
0.2505mm  
Horizontal Scan Frequency  
Vertical Scan Frequency  
26~100 kHz  
29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 ~ 71 Hz)  
Resolution  
2560 dots x 1600 lines  
Display Colors  
Recommended Brightness  
Display Area  
16.77 million colors (max.)  
120cd/m2 or less (with color temperature of between 5000K to 6500K)  
641.2 mm (H) × 400.8 mm (V) (25.2" (H) x 15.8" (V))  
100-120 VAC 10%, 50/60 Hz, 1.8A  
Power Supply  
200-240 VAC 10%, 50/60 Hz, 0.8A  
Power Consumption  
Input Signal Connector  
Max.  
Min. (Normal)  
:170 W (with USB)  
:81W (without USB)  
Power Saving Mode :Less than 2 W (for single signal input without USB)  
Power switch Off  
:1W or less  
SIGNAL 1:DVI-D, Dual Link  
SIGNAL 2:DVI-D, Single Link (HDCP compliant)  
Input Signal (Digital)  
Signal registration  
Plug & Play  
TMDS  
10  
VESA DDC 2B / EDID structure 1.3  
Dimensions with stand  
689 mm (W) x 511.5 ~ 629.5 mm (H) x 254.7 mm (D)  
(27.1"(W) x 20.1" ~ 24.8" (H) x 10"(D))  
without stand  
with hood  
689 mm (W) x 450 mm (H) x 90 mm (D)  
(27.1"(W) x 17.7" (H) x 3.54"(D))  
699 mm (W) x 520 ~ 638 mm (H) x 406.5 mm (D)  
(27.5"(W) x 20.5" ~ 25.1" (H) x 16"(D))  
Weight  
with stand  
without stand  
with hood  
15.7 kg (34.6 lbs.)  
11.2 kg (24.7 lbs.)  
17 kg (37.5 lbs.)  
Environment Temperature  
Conditions  
Humidity  
Operating  
Storage  
: 0°C ~ 35°C (32°F ~ 95°F)  
: -20°C ~ 60°C (-4°F ~ 140°F)  
Operating  
Storage  
: 30% to 80% R.H. Non-condensing  
: 30% to 80% R.H. Non-condensing  
Pressure  
Operating  
Storage  
: 700 to 1060 hPa.  
: 200 to 1060 hPa.  
Revision 2.0  
USB  
standard  
USB port  
USB Specification  
Upstream port x 1  
Downstream port x 2  
Communication Speed  
Power Supply  
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)  
Downstream: 500 mA for each (max.)  
ꢀꢄ  
 
5. Reference  
Dimensions  
628(24.7)  
588(23.1)  
240(9.4)  
mm (inch)  
SWIVEL  
322.8(12.7)  
405.6(16)  
347.7(13.7)  
689(27.1)  
643.3(25.3)  
T
I
L
T
1.6  
1.6  
4
0
°
(0.06)  
(0.06)  
22.9  
294.5(11.6)  
294.5(11.6)  
100  
(3.9)  
254.7(10)  
406.5(16)  
170(6.7)  
299(11.8)  
272(10.7)  
699(27.5)  
209(8.2)  
118.8(4.7)  
70.5(2.78)  
254.7(10)  
Default settings  
Brightness  
Smoothing  
40%  
3
Temperature  
FineContrast Mode  
PowerManager  
Screen Size  
Off Timer  
5000K  
Custom  
DVI DMPM  
Full  
Disable  
Menu Settings  
Menu Size  
Normal  
Menu Off Timer  
45 seconds  
On  
Beep  
Language  
English  
Display Setup  
Signal Selection  
Single Display  
Dual Link  
ꢀꢅ  
5. Reference  
Pin Assignment  
•DVI-D Connector  
3
1
9
17  
2
4
12  
20  
6
7
8
16  
24  
5
13  
21  
10 11  
19  
14 15  
22 23  
18  
SIGNAL1 : Applicable to DualLink  
Pin No.  
Signal  
Pin No.  
Signal  
Pin No.  
17  
Signal  
T.M.D.S. Data0-  
1
2
3
4
5
6
7
T.M.D.S. Data 2-  
T.M.D.S. Data 2+  
T.M.D.S. Data2/4 Shield  
T.M.D.S. Data 4-  
T.M.D.S. Data 4+  
DDC Clock (SCL)  
DDC Data (SDA)  
9
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1/3 Shield  
T.M.D.S. Data 3-  
T.M.D.S. Data 3+  
+5V Power  
Ground (return for +5V,  
Hsync and Vsync)  
Hot Plug Detect  
10  
11  
12  
13  
14  
15  
18  
19  
20  
21  
22  
23  
T.M.D.S. Data0+  
T.M.D.S. Data0/5 Shield  
T.M.D.S. Data 5-  
T.M.D.S. Data 5+  
T.M.D.S. Clock shield  
T.M.D.S. Clock+  
8
NC*  
16  
24  
T.M.D.S. Clock-  
(*NC: No Connection)  
SIGNAL2 : Applicable to SingleLink only  
Pin No.  
Signal  
T.M.D.S. Data 2-  
T.M.D.S. Data 2+  
T.M.D.S. Data2/4 Shield  
NC*  
Pin No.  
Signal  
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1/3 Shield  
NC*  
NC*  
+5V Power  
Ground (return for +5V,  
Hsync and Vsync)  
Hot Plug Detect  
Pin No.  
Signal  
T.M.D.S. Data0-  
T.M.D.S. Data0+  
T.M.D.S. Data0/5 Shield  
NC*  
1
2
3
4
5
6
7
9
17  
18  
19  
20  
21  
22  
23  
10  
11  
12  
13  
14  
15  
NC*  
NC*  
DDC Clock (SCL)  
DDC Data (SDA)  
T.M.D.S. Clock shield  
T.M.D.S. Clock+  
8
NC*  
16  
24  
T.M.D.S. Clock-  
(*NC: No Connection)  
USB Port  
Downstream  
Upstream  
Series A  
Series B  
Connector  
Connector  
No.  
1
2
3
4
Signal  
Remarks  
Cable power  
Serial data  
Serial data  
Cable Ground  
VCC  
- Data  
+ Data  
Ground  
ꢀꢆ  
5. Reference  
ꢃ-ꢂ. Glossary  
DVI (Digital Visual Interface)  
A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the  
signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector  
for digital signal input only. The other is DVI-I connector for both digital and analog signal inputs.  
DVI DMPM (DVI Digital Monitor Power Management)  
The Power management system for the digital interface. The "Monitor ON" status (operation mode)  
and the "Active Off" status (power-saving mode) are indispensable for the DVI-DMPM as the  
monitor's power mode.  
Gain Adjustment  
Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed  
through the color filter of the LCD panel. Red, green and blue are the three primary colors. The colors  
on the monitor are displayed by combining these three colors. The color tone can change by adjusting  
the illumination amount passed through each color's filter.  
Gamma  
Generally, the relationship that the light intensity values of a monitor change nonlinearly to the input  
signal level is called "Gamma Characteristic". On the monitor, low gamma values display the whitish  
images and high gamma values display the high contrast images.  
HDCP (High-bandwidth Digital Contents Protection)  
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.  
This helpsto transmit the digital contents safely by coding the digital contents sent via DVI terminal  
on the output side anddecoding them on the input side.Any digital contents cannot be reproduced if  
both of the equipments on the output and input sides are not applicableto HDCP system.  
Resolution  
The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen  
image. The display panel of this monitor consists of 2560 horizontal pixels and 1600 vertical pixels.  
At a resolution of 2560 x 1600, images are displayed as a full screen (1:1).  
Temperature  
Color Temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.  
At high temperatures the white tone appears somewhat blue, while at lower temperatures it appears  
somewhat red. Computer monitors generally give best performance at high temperature settings.  
5000 K: Slightly reddish white.  
6500 K: Warm-white tone, similar to white paper or daylight.  
9300 K: Slightly bluish white.  
ꢀꢇ  
 
5. Reference  
TMDS (Transition Minimized Differential Signaling)  
A signal transition method for the digital interface.  
VESA DPMS  
(Video Electronics Standards Association - Display Power Management  
Signaling)  
The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for  
"Display Power Management Signaling". DPMS is a communication standard that PCs and graphics  
boards use to implement power savings on the monitor side.  
ꢁ0  
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of Conformity  
We, the Responsible Party  
EIZO NANAO TECHNOLOGIES INC.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: ColorEdge CG301W  
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
* Reorient or relocate the receiving antenna.  
* Increase the separation between the equipment and receiver.  
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
* Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s  
authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the  
limits of a Class B digital device.  
- AC Cord  
- Shielded Signal Cable (Enclosed)  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
ꢁ1  
 
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor  
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige  
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der  
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:  
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:  
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät  
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der  
zugehörenden Bedienungsanleitung angegeben.  
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher  
als die Augenhöhe eines Benutzers in sitzender Position ist.  
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der  
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.  
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach  
hinten ≥ 5°).  
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale  
Kraftaufwand dafür muß weniger als 100 N betragen.  
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.  
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).  
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position  
kippsicher sein.  
Hinweis zur Ergonomie :  
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 2560 ×  
1600 , Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus  
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte  
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)  
„Maschinenlärminformations-Verordnung 3. GPSGV:  
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“  
ꢁꢀ  
 
EIZO NANAO CORPORATION  
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan  
Phone: +81 76 277 6792 Fax: +81 76 277 6793  
EIZO EUROPE AB  
Lovangsvagen 14 194 61, Upplands Väsby, Sweden  
Phone: +46 8 594 105 00 Fax: +46 8 590 91 575  
4th Edition-July, 2009  
03V22264D1  
(U.M-CG301W)  

Apollo Car Stereo System 4SL15 User Manual
Audiovox Jensen Phase Linear UMP9020 User Manual
Audiovox Mobile Video 128 8607 User Manual
Bushnell Binoculars 18 0833 User Manual
Casio FX 9860GII User Manual
Crestron electronic 1 5 User Manual
Crestron electronic CNXFZ User Manual
Denon RCD N7 User Manual
Fujitsu FMWCC37 User Manual
JVC GR D770 User Manual