Earthquake Sound HD250 X User Manual

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from  
defects in material and workmanship, under normal and proper use, for a period of ninety (90) days from  
the date of purchase (as shown on the original sales receipt with serial number affixed/written on it). The  
ninety (90) day warranty period is valid only if an authorized Earthquake dealer properly installs the  
product, and the warranty registration card is properly filled out and sent to Earthquake Sound  
Corporation. Ifa non-authorized party installs the product, no warranty will be rewarded.  
Sound That Will Move You  
(A)Ninety (90) day limitedwarranty guidelines:  
Earthquake pays forlabor, parts, and ground freight (US mainland only) back tocustomer.  
(B)Warning:  
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no  
problem(s) will not be covered by the day limited warranty. Customer will be charged a  
minimumofone(1) houroflabor(ongoingrates) plusshippingcharges back tocustomer.  
HD250-X  
owner’s manual  
(C) Earthquake agrees to repair or replace - at our option - all such defective products/parts  
subjecttothefollowingprovisions:  
!
Defective products/parts have not been altered or repaired by other than an Earthquake factory  
approved technician.  
Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by  
!
improper line voltage, used with incompatible products, or have its serial number or any part of  
it altered, defaced or removed, or have been used in any way that is contrary to Earthquake's  
written instructions.  
(D)Warranty Limitations:  
Earthquake warranty does not cover products that have been modified or abused, including but not  
limited tothe following:  
!
Damages to driver enclosure or part finish due to misuse, abuse, or use of improper use of  
cleaning materials/methods.  
Bent driver frame, broken speaker connectors, holes in grille or burnt speaker voice coil.  
Fading, deterioration ofspeaker components &finish due toimproper exposure toelements.  
!
!
!
Subsequent damage toand fromother products.  
A warranty claim will not be valid if the warranty registration card is not properly filled & returned to  
Earthquake with a copy ofthe sales invoice.  
(E) Service Request:  
To receive product(s) service, contact Earthquake Sound’s service department at (510) 732-1000  
and request an RMA number (Return Material Authorization) as item(s) shipped without a valid  
RMAnumber will be refused. Make sure you provide us with your complete and correct shipping  
address, a valid phone number, and a brief description of the problem you are experiencing with  
the product. In most cases, our technicians might be able to resolve the problem over the phone,  
thus eliminating the need toship the product.  
(F) Shipping Instructions:  
Product(s) must be packaged in its original protective box(es) to minimize transport damage.  
Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake  
Sound Corporation reserves the right to refuse product that improperly packed. Original sales  
receipt must accompany product returned for service. Ship product to: Earthquake Sound Corp.  
2727 McConeAvenue, Hayward, CA94545.  
You are responsible forthe costofshipping the product toEarthquake Sound Corporation.  
Earthquake Sound Corporation  
2727 McCone Avenue. Hayward, CA 94545.USA  
US Toll Free: 1-800-576-7944 | Tel: 510-732-1000 | Fax: 510-732-1095  
(G)DisputesResolution:  
All disputes - between clients and Earthquake Sound Corporation - resulting from the ninety (90) day  
limited warranty policy must be resolved according to the laws & regulations of the county of  
Alameda, California.  
EQ11-25  
matching horn  
4”  
4 9/16”  
3” deep  
outer diameter  
1 5/8”  
Specifications are subject to change without notice  
ATTACHING HD250-X (DRIVER) TO EQ11-25 (HORN)  
1) Place the EQ11-25 Horn facing downward onto a flat, hard surface.  
2) Take the HD250-X Driver and carefully twist into the Horn. Hold the Horn down firmly  
with one hand while twisting the Driver in with the other hand.  
3) Make sure the Driver screws evenly and at a level angle.  
Consider using a protective mat as to not damage the horn  
Specifications are subject to change without notice  

Aiwa CDC MP3 YU User Manual
Atech Tech PROExpress 7 User Manual
Blaupunkt Bologna C50 User Manual
Canon IFpro YJ12x6 5B IRS A User Manual
Emerson FR24RD User Manual
Franklin Calculator MG 6804D User Manual
Hypertec Messenger 3507 User Manual
Hypertec PerfectSkin 15 4 N19598NHY User Manual
IDEAL INDUSTRIES ICOS HE18 User Manual
JBL GTO938 User Manual