Custom Brackets Two Way System Horizontal Configuration CSC2264H User Manual

Custom Shop  
Pre-Engineered  
Loudspeaker Systems  
CSC2264H  
12” Two-Way System  
Horizontal Configuration  
O
O
60 x 40 Coverage Pattern  
For Permanent Installation  
Rear  
Key Features:  
2206H 12” VGC (Vented Gap  
TM  
Cooled LF transducer  
Top/Bottom  
28  
TM  
2333 Optimized Aperture HF  
14.88  
Sides  
horn with 1.5” throat  
2447J 4” diaphragm, 1.5” throat  
compression driver  
30° 15.5  
Compact trapezoidal enclosure  
DuraFlex finish - tough, weather  
resistant and paintable  
Front  
Tamper resistant internal Bi-  
amp/Passive crossover selector  
Specifications:  
System:  
Advanced Network Topology for  
smooth power response and sta-  
ble amplifier loading  
Frequency Range (-10 dB): 37 Hz - 20 kHz  
Frequency Response (±3 dB): 60 Hz - 18 kHz  
Horizontal Coverage Angle (-6 dB): 80° averaged 500 Hz to 16 kHz  
Vertical Coverage Angle (-6 dB): 70° averaged 500 Hz to 16 kHz  
Directivity Factor (Q): 14 averaged 500 Hz to 16 kHz  
Directivity Index (DI): 10.5 dB averaged 500 Hz to 16 kHz  
Sensitivity2: 95 dB SPL, 1W @ 1m (3.3 ft)  
Versatile complement of suspen-  
sion points  
The CSC2264H is a JBL Custom  
Shop produced adaptation of the  
Sound Power series SP212-6. The  
same transducers and switchable  
passive/active crossover network  
have been repackaged in a horizon-  
tal configuration enclosure. All of the  
features of the standard product  
have been maintained while adding  
installation flexibility.  
Calculated Maximum SPL2: 129 dB SPL, 1W @ 1m (3.3 ft)  
Nominal Impedance: 8 ohms (Passive crossover mode)  
Power Rating1: 600 watts IEC, 2400 watts peak  
Transducers:  
Low Frequency: 2206H, 300 mm (12 in) dia., 100 mm (4 in) edge  
wound ribbon voice coil  
Nominal Impedance: 8 Ohms  
Power Rating: 600 watts AES, 2400 watts peak  
Sensitivity2: 95 dB SPL, 1W @ 1m (3.3 ft)  
Calculated Maximum SPL2: 129 dB SPL, 1W @ 1m (3.3 ft)  
High Frequency: 2447J; 100 mm (4”) diaphragm and voicecoil  
dia., 76 mm (1.5”) throat dia.; 2333 horn  
Nominal Impedance: 16 Ohms  
The CSC2264H is available on a  
build-to-order basis. Contact the  
Custom Shop for information on  
availability and lead time.  
Input Power Rating: 75 W AES; 300 W Peak  
2
Sensitivity : 112 dB, 1 W @ 1 m (3.3’)  
Calculated Maximum SPL: 137 dB @ 1 m (3.3’)  
Physical:  
o
Enclosure: Trapezoidal, 15 top & bottom angles, 18 mm  
birch plywood  
Environmental Specifications: Mil-Std 810, IPX4 per IEC 529  
Suspension Attachment: 12 points, accept M10 threaded hardware  
Finish: Black DuraFlex coating  
1Rating based on test signal of IEC filtered random noise  
with a peak-to-average ratio of 6 dB, two hours duration.  
2Sensitivity is based on a swept 500 Hz to 2.5 kHz test sig-  
nal for an input of 2.83V @ 8 ohms.  
(white or custom color optional)  
Grille: Black powder coated 18 gauge  
perforated steel grille with foam backing (white or  
custom color optional)  
Input Connector: 2 x NL4 Neutrik Speakon connector  
Dimensions (H x W x D): 394 mm x 711 mm x 378 mm  
(15.5 in x 28 in x 14.88 in)  
JBL continually engages in research related to product  
improvement. Some materials, production methods and  
design refinements are introduced into existing products  
without notice as a routine expression of that philosophy.  
For this reason, any current JBL product may differ in some  
respect from its published description, but will always equal  
or exceed the original design specifications unless other-  
wise stated.  
Net Weight: 31.8 kg (70 lb)  
11/19/01 ATR  

Audiovox AVD400T User Manual
Audiovox MP5620 User Manual
Bryan Boilers BH Series User Manual
Bryan Boilers HFS 15 100 100 D User Manual
Canon Camcorder ELURA65 User Manual
Canon DM XL1S User Manual
Crown Boiler BSI310 User Manual
HP (Hewlett Packard) R740 User Manual
JBL GTO963 User Manual
Jensen Car Stereo System MCD5112 User Manual