Clarion pro audio vrx 630 User Manual

Owner’s manual & Installation manual

Mode d’emploi et manuel d’installation

Manual de instrucciones y de instalación

VRX630

6.5” MONITOR & FM/AM RADIO WITH CD/MD/DVD

CHANGER CONTROL

•

MONITEUR DE 6,5 POUCES ET RADIO FM/AM AVEC

COMMANDE DE CHANGEUR DE CD/MD/DVD

•

MONITOR DE 6,5-PULGADAS Y RADIO FM/AM CON

MANDO PARA EL CAMBIADOR DE CD/MD/DVD

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina

Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China

QC-6710B

280-7946-00

2003/01 (D·C)

5. MODE DISPLAY

The Color LCD Display and the Information Panel on the main unit show the following displays, provid-

ing information about the mode and functions operated.

1. PRECAUTIONS

2. CAUTIONS ON HANDLING

LCD panel/Generalities

WARNING

For your safety, the driver should not watch the TV or operate the controls while driving.

Please note that watching and operating the TV while driving are prohibited by law in

some countries. Also, while driving, keep the volume to a level at which external sounds

can be heard.

For a longer service life, be sure to read the following cautions.

Display common to each mode

•

Be sure to store the LCD panel inside the

main unit when parking the car outdoors for

long period of time. The LCD panel will oper-

ate properly in a temperature range of 0 to

60°C.

Don’t allow any liquids on the set from drinks,

umbrellas etc. Doing so may damage the in-

ternal circuitry.

•

Do not insert objects or poke in the space

between the LCD panel and the main unit

when the panel is tilted.

COLOR LCD DISPLAY

INFORMATION PANEL

1. This unit uses a precision mechanism. Even

•

Do not place anything on the display when

the panel is tilted.

in the event that trouble arises, never open

the case, disassemble the unit, or lubricate

the rotating parts.

INFORMATION FOR USERS:

MAIN

•

The remote controller may not work if the re-

mote control sensor is exposed to direct sun-

light.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY AND WILL VIOLATE FCC

APPROVAL.

2. TV broadcast reception

•

Do not disassemble or modify the set in any

way. Doing so may result in damage.

•

In extremely cold weather, the display move-

ment may slow down and the display may

darken, but this is not a malfunction.The dis-

play will work normally when the temperature

increases.

When receiving the TV broadcasts, the

strength of the signals changes since the car

is moving, so in some cases it may not be

possible to receive clear pictures.

Do not draw the LCD panel out and use it as

a tray. Also, subjecting the LCD panel to

shocks may result in breakage, deformation

or other damage.

MODEL

VRX6 3 0

• TV signals are strongly linear, so reception

is affected by buildings, mountains and

other obstacles.

•

Small black and shiny spots inside the LCD

panel are normal for LCD products.

12V

GROUND

AM 530-1710kHz/FM87.9-107.9MHz

•

Do not let cigarettes burn the display. Doing

so may damage or deform the cabinet.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

The LCD panel may stop temporarily when it

opens or closes, when the engine stops or

when it is cold.

• Such external factors such as electric train

lines, a high voltage lines, and signal de-

vices may disturb the picture or cause

noise.

If a problem should occur, have the set in-

spected at your store of purchase.

Clock Time display

ISO

8mmMAX

286-6215-00

∗ If the reception is poor, switch to a station with

good reception.

SERIAL No.

QC-6710B

Clarion Co.,Ltd.

MADE IN CHINA

Cleaning

• Cleaning the cabinet

• Cleaning the LCD panel

Use a soft, dry cloth and gently wipe off the

dirt. For tough dirt, apply some neutral deter-

gent diluted in water to a soft cloth, wipe off

the dirt gently, then wipe again with a dry cloth.

The LCD panel tends to collect dust, so wipe it

off occasionally with a soft cloth. The surface is

easily scratched, so do not rub it with hard ob-

jects.

TITLE LIST mode display

MODEL

VRX6

12V GROUND

AM 530-1710kHz/F 87.9-107.9MHz

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

ISO

8mmMAX

286-6215-00

Clarion Co.,Ltd.

MADE IN CHINA

SERIAL No.

QC-6710B

COLOR LCD DISPLAY

INFORMATION PANEL

Do not use benzene, thinner, car cleaner, etc.,

as these substances may damage the cabinet

or cause the paint to peel. Also, leaving rub-

ber or plastic products in contact with the cabi-

net for long periods of time may cause stains.

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

VRX6 3 0

280-7946-00_Eng(3-8)

1/17/03, 2:17 PM

280-7917-00

CONTROLS / COMMANDES / REGLER / CONTROLLI

REGELAARS / CONTROLES / KONTROLLER

4. NOMENCLATURE

JOYSTICK Operation

Note:

• Many settings/procedures have to be performed by using the JOYSTICK ¡. Be sure to read this chapter

Names of Buttons

in order to operate it properly.

• In the DVD changer mode, items for menu display, etc. can be selected by operating the JOYSTICK ¡

Main unit / Unité principale / Unidad principal

Note:

upward, downward, leftward or rightward.

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

ꢀꢀSelecting an item in the menu

With the Display closed / Avec l`afficheur fermé / Con el visualisador cerrado

Select an item displayed in the menu by operat-

ing the JOYSTICK ¡ upward or downward.

With the display closed

With the display open

ꢀꢀSetting an option for the selected item

¥ Color LCD display

& A-M (Audio-Mode) button

* ADJ (Adjust) button

( TITLE button

When the setting options for an item are listed

on the right of the display, you can choose the

desired option by operating the JOYSTICK ¡

leftward or rightward. Then, press the center of

the JOYSTICK ¡ to set your choice.

1 POWER button

FNC (Function) button

2 SEARCH button

VOLUME button

) VISUAL button

a button

d button

ꢀ When“push NEXT”is displayed next to the

menu item

¡ JOYSTICK

™ Remote Control Infrared Sensor

3 PLAY/PAUSE button

4 Information Panel

5 PS (Preset scan)/AS (Auto store) button

SCN (Scan) button

1. Press the ENT at the center of the JOYSTICK

¡ to select the item and show the setting

display for this item.

With the Display open / Avec l`afficheur ouvert / Con el visualisador abierto

2. Operate the JOYSTICK ¡ upward or down-

ward to select the desired setting option, then

press ENT at the center of the JOYSTICK ¡

to set your choice.

6 DCP RELEASE lever

7 WIDE button

RPT (Repeat) button

8 TV/VTR button

ꢀ Returning to the previous mode

RDM (Random) button

9 Z-EHCR (Z-enhancer) button

0 ISR button

Select the item “MENU” by operating the JOY-

STICK ¡ leftward or rightward, then press the

ENT at the center of the JOYSTICK ¡.

! OPEN button

MONI LOCK (Monitor lock) button

@ DISP (Display) button

# PRESET buttons (1 to 6)

DIRECT buttons (1 to 6)

$ MUTE button

)

(

™

% BND (Band) button

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

VRX6 3 0

280-7917-00

280-7946-00_Eng(3-8)

1/17/03, 2:17 PM

RADIO mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

CD/MD Changer mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

VRX6 3 0

DVD Changer mode display

COLOR LCD DISPLAY

INFORMATION PANEL

While the car is moving, the screen below is dis-

played.

MAIN

DVD

• No sub-indication

TV mode display

COLOR LCD DISPLAY

INFORMATION PANEL

MAIN

SUB

VRX6 3 0

6. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

2. Lock the DCP/Operation Panel at the upper

center until a click is heard.

POWER button

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. Turn the power off.

2. Deeply push in the DCP RELEASE lever 6

to release the DCP/Operation Panel.

DCP/RALEASE lever

3. Press the power button 1 to turn on the

power.

∗ The unit will not accept any key inputs for 1 sec-

ond after the DCP has been reattached.

CAUTION

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it

or subject it to strong shocks.

3. Pull the DCP toward you and remove it.

• If the Operation Panel is kept open, the DCP

may drop due to vibration of the car. This

results in damage to the DCP. So close the

Operation Panel or remove the DCP to store

into the case.

• The connector connecting the main unit and

the DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

DCP/Operation Panel

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

Attaching the DCP

1. Hold the DCP/Operation Panel with its rear

side facing the main unit and, as shown in the

figure below, put the lower edge of the panel

onto the corresponding edge of the main unit.

VRX6 3 0

7. REMOTE CONTROL

When the panel is open

Remote control unit

Inserting the Batteries

1. Turn the remote control unit over, then slide

the rear cover in the direction of the arrow.

2. Insert the AA (SUM-3, IECR-6/1.5V) batter-

ies that came with the remote control unit

facing in the directions shown in the figure,

then close the rear cover.

Notes:

Using batteries improperly can cause them to explode.

Take note of the following points:

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

VRX6 3 0

Functions of Remote Control Unit Buttons

CD changer

MD changer

DVD changer

Mode

Radio

Button

FUNC

Switches among Radio, CD changer, MD changer, DVD changer and TV.

Turns power on and off. When pressed and held for 1 second: Turns power off.

BAND

DISC UP

TOP

Switches reception band. Moves to the next disc in Switches reception band.

increasing order.

∞

VOLUME

Increases and decreases volume (in all modes).

Moves preset channels

up and down.

Moves tracks up and

down.

Moves preset channels

up and down.

When pressed and held

for 1 second:

Fast-forward/

Fast-backward.

PLAY/PAUSE

No function.

Switches between

No function.

playback and pause.

•

MUTE

ISR

Turns mute on and off.

ISR on and off. Press and hold for 2 seconds or longer: Stores current station

into ISR memory.

⁄

DISP

Turns on and off the monitor.

When pressed and held for 1 second or longer in the DVD changer mode:

switches the display size.

MONI

PS/AS

SCN

Preset scan.

When pressed and held

for 2 seconds: Auto store. for 1 second: Disc scan

Scan play.

When pressed and held

Preset scan.

When pressed and held

for 2 seconds: Auto store.

play.

(∗)

‹

WIDE

RPT

No function.

Repeat play.

When pressed and held

for 1 second: Disc repeat Switches the VISUAL

play.

Switches TV display size.

mode.

(∗)

TV/VTR

RDM

Random play.

When pressed and held

for 1 second: Disc

random play.

Switches between TV

and VTR.

(∗)

›

VISUAL

Switches the VISUAL mode. In the DVD changer mode, you can not use this

function.

Notes:

• In the DVD changer mode, the remote control unit can not work for some items.

• Please use the dedicated remote control in the DVD changer mode.

(∗)In the DVD changer mode, this remote control unit makes the same operation as that performed using the

button with the same name on the remote control unit for the DVD changer.

VRX6 3 0

8. OPERATIONS

Note: Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “3. CONTROLS” on page 5 (unfold).

Adjusting the volume

Operate the VOLUME button 2 in the direction

CAUTION

When the unit is turned on, starting and stop-

ping the engine with its volume raised to the

maximum level may harm your hearings. Be

careful about adjusting the volume.

of the arrows w (up) or z➜(down) to adjust the

volume;

w: Increases the volume.

z: Decreases the volume.

Note:

∗ The volume level indicated in the display is in a

• Use this unit after starting the engine.

range from 0 (minimum) to 33 (maximum).

CAUTION

While driving, keep the volume at a level at

which external sounds can be heard.

Turning on and off the power

Note:

Switching the display

When the panel is closed:

• Be careful about using this unit for a long time with-

out running the engine. If you drain the car’s bat-

tery too far, you may not be able to start the en-

gine and this can reduce the service life of the

battery.

Press the DISP button

play.

to select the desired dis-

Each time you press the DISP button @, the dis-

1. Press the POWER button 1.

play switches in the following order:

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the POWER button 1 for 1 sec-

ond or longer to turn off the power for the unit.

Note:

• About the “SYSTEM CHECK”

The confirmation of connected equipment must be

performed for this unit only when the wiring con-

nection is complete and power is turned on to the

unit first. When the power is supplied, “SYSTEM ”

and “PUSH PWR” appear alternately in the dis-

play. Press the POWER button 1, the system

check starts inside the unit. When “COMPLETE”

appears, press once again the POWER button 1.

Selecting a mode

1. Press the FNC button 1 to change the mode

of operation.

2. Each time you press the FNC button 1, the

mode of operation changes in the following

order:

Notes:

• Once selected, the preferred display becomes the

default display. When a function adjustment such

as volume is made, the display momentarily

switches to that function’s display, then returns

back to the preferred display several seconds af-

ter the adjustment.

Radio mode ➜ DAB mode ➜ CD changer

mode ➜ MD changer mode ➜ DVD changer

mode ➜ TV mode ➜ Radio mode...

∗ External equipment not connected with CeNET

is not selected.

VRX6 3 0

Basic Operations

•

If a title has been input, it is shown in the SUB dis-

play. If no title has been input, “---------” appears in

the display. To input a title, refer to the subsection

“Entering titles” in “Other Functions” section.

3. To store the Color LCD display ¥ in the source

unit, turn it to the horizontal position until a

click is heard.

• For CD, MD and TV, some special characters of

the title, will not be displayed on the Information

Panel of the DCP. In this case, those characters

will only be left blank.

Showing a mode display

When the panel is open:

Press the TITLE button ( to show the Title List

display. In the Title List display, the titles of items

stored in the PRESET buttons # 1 to 6 are listed.

Turning on and off the monitor

Pressing the DISP button @ turns the monitor

on and off.

∗ For detailed information, refer to the section “Title

list play”.

∗ When a button is pressed or during security moni-

toring, the monitor-off mode is canceled.

Opening and turning the display

Notes:

• Do not place any object on the open display.

• Do not drop any object on the movable part.

• Do not expose the display to shocks.

1. Press the OPEN button ! to open the Color

LCD display ¥.

Mute

Each time you press the MUTE button $, mute

is turned on and off.

“MUTE” appears when mute is turned on.

∗ If the Color LCD display ¥ is left horizontally

in the open position for 10 seconds or longer,

it is automatically drawn in.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect

stored in memory. Select the one you prefer.

2. Turn the Color LCD display ¥ upwards to a

good view angle.

When the monitor is turned upwards, a pic-

ture appears in the display. The Information

Panel 4 display disappears.

∗ The factory default setting is “Z-EHCR OFF”.

When a Z-enhancer comes on (1-3), “Z-EHCR”

appears in the display.

• “Z-EHCR 1” (Z-Enhancer 1):

Setting emphasizing bass.

• “Z-EHCR 2” (Z-Enhancer 2):

Setting emphasizing treble.

• “Z-EHCR 3” (Z-Enhancer 3):

Setting emphasizing bass and

treble.

• “Z-EHCR OFF” (Z-Enhancer off):

Neither bass nor treble are empha-

sized by the Z-enhancer.

CAUTION

Do not turn the display unless it is completely

open.

Note:

• Incapable of operation when connecting DSP

When adjusting the angle of the display be

careful no to let your fingers get caught by

the panel or instrument panel of the vehicle.

(DPH910).

VRX6 3 0

Basic Operations

When the panel is closed:

Adjusting the bass and treble

Each time you press the Z-EHCR button 9, the

Notes:

tone effect changes in the following order:

• This function is enabled only when the panel is

open.

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

• This function can be adjusted only when the Z-

enhancer is OFF.

“Z-EHCR OFF” ➜ “Z-EHCR 1”...

1. Press the A-M button & to change into the

When the panel is open:

AUDIO-MODE display.

1. Press the A-M button & to change into the

2. Operate the JOYSTICK ¡ upward or down-

ward to select “BAS/TRE”. Then press the

ENT at the center of the JOYSTICK ¡ to

change into the BASS/TREBLE adjusting dis-

play.

AUDIO-MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “Z-EHCR”. Press the ENT at

the center of the JOYSTICK ¡ to change into

the Z-enhancer selecting display.

3. Operate the JOYSTICK ¡ rightward or left-

3. Operate the JOYSTICK ¡ upward or down-

ward to adjust the “BASS” or “TREBLE”.

ward to select out of:

4. Operate the JOYSTICK ¡ upward or down-

ward to adjust a level (adjustment range: from

-6 to 6).

“TYPE 1” (Z-Enhancer 1) “TYPE 2” (Z-En-

hancer 2)

“TYPE 3” (Z-Enhancer 3)

“OFF” (Z-Enhancer off),

5. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”. Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

and press the ENT at the center of the JOY-

STICK ¡ to set a desired Z-enhancer.

4. When the setting is finished, operate the JOY-

STICK ¡ rightward or leftward to move the

cursor to the “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Adjusting the balance and fader

Note:

∗ To return from the AUDIO-MODE display to the

STANDARD display, press the A-M button &

once again.

• This function is enabled only when the panel is

open.

1. Press the A-M button & to change into the

AUDIO-MODE display.

Adjusting the Z-enhancer

Note:

• This function is enabled only when the panel is

open.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “BAL/FAD”. Then press the

ENT at the center of the JOYSTICK ¡ to

change into the BAL/FAD adjusting display.

1. Press the A-M button & to change into the

3. Operate the JOYSTICK ¡ rightward or left-

AUDIO-MODE display.

ward to select “BALANCE” or “FADER”.

2. Operate the JOYSTICK ¡ upward or downward

4. Operate the JOYSTICK

upward or down-

to select

center of the JOYSTICK ¡ to change into the

Z-enhancer adjusting display

“Z-EH LVL” level. Press the ENT at the

ward to make an adjustment.

Adjusting range of the balance: L13 to R13

Adjusting range of the fader: front 12 / rear 12

3. Operate the JOYSTICK ¡ upward or down-

ward to adjust the Z-enhancer level.

5. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”. Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

∗ When Z-Enhancer 1 is selected, you can adjust

the bass in the range of ±2.

∗ When Z-Enhancer 2 is selected, you can adjust

the treble in the range of ±2.

∗ When Z-Enhancer 3 is selected, you can adjust

the bass and treble in the range of ±2.

4. When the adjustment is finished, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

VRX6 3 0

Basic Operations

Turning on/off the loudness

The loudness effect emphasizes the bass and

treble to create a natural sound tone. When you

are listening to music at a low volume, it is rec-

ommended to use the loudness effect.

Radio Operations

FM reception

For enhanced FM performance the

tuner includes signal actuated stereo control, En-

hanced Multi AGC, Impulse noise reduction

curcuits and Multipath noise reduction circuits.

∗ This function is enabled only when the panel is

open.

Changing the reception area

This unit is initially set to USA frequency inter-

vals of 10kHz for AM and 200kHz for FM. When

using it outside the USA, the frequency recep-

tion range can be switched to the intervals be-

low.

1. Press the A-M button & for 1 second or longer

to select Loudness ON. The “LD” indicator

lights in the display.

2. Press the A-M button & for 1 second or longer

to select Loudness OFF. The “LD” indicator

goes off.

➜ Setting the reception area

Note:

While pressing DISP button @, each time you

press and hold the number “6” of the PRE-

SET buttons # for 2 seconds or longer, the

reception area switches from inside the USA

to outside the USA or from outside the USA

to inside the USA.

• When using a sold separately digital sound proces-

sor (DPH910), a feature called auto loudness is

selected. This function is different from the loud-

ness effect. For further details on the auto loudness

feature, refer to the subsection“Output adjustment

of auto loudness, subwoofer and playback

band”.

∗ Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press the FNC button 1 and select the RA-

DIO mode.

2. Press the BND button % and select the radio

band. Each time the button is pressed, the

radio reception band changes in the following

order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the right or left side of the SEARCH

button 2 to tune in the desired station.

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

Seek tuning

1. Press the BND button % and select the de-

sired band. (FM or AM)

∗ If “MANU” is lit in the display (or when the

panel is closed, if the indicator “SRCH” is not

lit) press and hold the BND button % for 1

second or longer. “MANU” in the display goes

off (or when the panel is open the indicator

“SRCH” lights)and seek tuning is now avail-

able.

VRX6 3 0

Radio Operations

2. Press the right or left side of SEARCH button

Manual memory

1. Press the BND button % and select the de-

2 to automatically seek a station.

When the right side of SEARCH button 2 is

pressed, the station is sought in the direction

of higher frequencies; if the left side of

SEARCH button 2 is pressed, the station is

sought in the direction of lower frequencies.

sired band. (FM or AM)

2. Select the desired station with seek tuning,

manual tuning, or preset tuning.

3. Press and hold one of the Preset buttons #

for 2 seconds or longer to store the current

station into preset memory.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

Auto store

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequentially.

If 6 receivable stations cannot be received, a

previously stored station remains unoverwritten

at the memory position.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In quick tun-

ing mode, you can quickly tune the desired fre-

quency.

1. Press the BND button % and select the de-

sired band. (FM or AM)

∗ If “MANU” is not lit in the display (or when the

panel is closed, if the indicator “SRCH” is lit),

press and hold the BND button % for 1 sec-

ond or longer. “MANU” appears in the display

(or when the panel is closed, the indicator

“SRCH” goes off) and manual tuning is now

available.

2. Press and hold the PS/AS button 5 for 2 sec-

onds or longer. The stations with good recep-

tion are stored automatically to the preset

channels.

Preset scan

2. Tune into a station.

Preset scan receives the stations stored in pre-

set memory in order. This function is useful

when searching for desired station in memory.

➜ Quick tuning:

Press and hold the right or left side of the

SEARCH button 2 for 1 second or longer to

tune in a station.

1. Press the PS/AS button 5.

2. When the desired station is tuned in, press

the PS/AS button 5 again to continue re-

ceiving that station.

➜ Step tuning:

Press the right or left side of the SEARCH

button 2 to manually tune in a station.

Note:

• Be careful not to press and hold PS/AS button 5

for 2 seconds or longer, otherwise the auto store

function engages and the unit starts storing stations.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

PRESET buttons # recalls the stored radio fre-

quency automatically.

Instant station recall (ISR)

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even oper-

ates with the unit in other modes.

1. Press the BND buttons % and select the de-

sired band. (FM or AM)

➜ ISR memory

2. Press the corresponding Preset buttons #

1. Select the station that you wish to store in

ISR memory.

to recall the stored station.

∗ Press and hold one of the Preset buttons #

for 2 seconds or longer to store that station

into preset memory.

2. Press and hold ISR button 0 for 2 seconds

or longer.

➜ Recalling a station with ISR

In any mode, press ISR button 0 to turn on

the radio function and tune the selected radio

station. “ISR” appears in the display. Press

ISR button 0 again to return to the previous

mode.

VRX6 3 0

CD Changer Operations

When the panel is closed:

CD changer functions

1. Display the CD-text title (disc or track).

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a to-

tal of 2 changers (MD and/or CD and/or DVD).

2. Press and hold the BND button % for 1 sec-

ond or longer. The titles scroll.

When the panel is open:

Press the FNC button 1 and select the CD

changer mode to start play. If 2 CD changers are

connected, press the FNC button 1 to select the

CD changer for play.

1. Display the CD-text title (disc & track).

2. Press and hold the TITLE button ( for 1 sec-

ond or longer to scroll the disc title.

3. To scroll the track title, press for 1 second or

longer the TITLE button ( within 30 seconds

after scrolling the disc title.

∗ If “NO MAG” appears in the display, insert the

magazine into the CD changer. “LOADING” ap-

pears in the display while the player loads (checks)

the magazine.

Notes:

∗ If “NO DISC” appears in the display, eject the maga-

zine and insert discs into each slot.Then, reinsert

the magazine back into the CD changer.

• If the disc title is shorter than 16 characters, the

track titles begin to scroll immediately.

• If the track title is shorter than 16 characters, the

track titles does not scroll.

CAUTION

CD-ROM discs cannot be played in the CD

changer.

Selecting a CD

Each of the DIRECT buttons # corresponds to

a disc loaded into the magazine.

ꢀꢀSelecting a disc from 1 to 6

Pausing play

1. Press the PLAY/PAUSE button 3 to pause

Press the corresponding DIRECT button (1 to 6)

# to select the desired disc.

ꢀ Selecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

play. “PAUSE” appears in the display.

2. To resume play, press the PLAY/PAUSE but-

Press the corresponding DIRECT button (7 to 12)

# for 1 second or more, then select the desired

disc.

ton 3 again.

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

Selecting a track

ꢀꢀTrack-up

Each time you press and hold the DISP button

@ for 1 second or longer, the title display changes

in the following order.

1. Press the right side of the SEARCH button

2 to move ahead to the beginning of the next

track.

When the panel is closed:

2. Each time you press the right side of the

SEARCH button 2, the track advances ahead

to the beginning of the next track.

User title (disc) ꢀ CD-text title (disc) ꢀ CD-text

title (track) ꢀ User title (disc)...

When the panel is open:

ꢀꢀTrack-down

User title (disc) ꢀ CD-text title (disc & track) ꢀ

User title (disc)...

1. Press the left side of the SEARCH button 2

to move back to the beginning of the current

track.

Note:

• If the CD playing is not a CD-text CD or no user

title has been input, “----------” appears in the dis-

play.

2. Press the left side of the SEARCH button 2

twice to move to the beginning of the previ-

ous track.

ꢀꢀScrolling a CD-text title

When a CD-text title is longer than 16 charac-

ters (8 characters when the panel is closed), you

can scroll the display as follows.

VRX6 3 0

CD Changer Operations

Fast-forward/Fast-backward

Repeat play

ꢀꢀFast-forward

The repeat play continuously plays the current

track.This function continues automatically until it

is cancelled or the mode is changed.

Press and hold the right side of the SEARCH

button 2 for 1 second or longer.

1. Press the RPT button 7, to make repeat play

ꢀꢀFast-backward

starts. “RPT” lights in the display.

Press and hold the left side of the SEARCH but-

ton 2 for 1 second or longer.

2. To cancel repeat play, press the RPT button

7 again. “RPT” goes off from the display and

the unit returns to normal play.

Top function

The top function plays from the first track (track

No. 1) of the disc.

Disc repeat play

After all tracks in the current disc have been

played, the disc repeat play automatically replays

the current disc over from the first track.This func-

tion continues automatically until it is cancelled

or the mode is changed.

ꢀꢀWhen playing a disc 1 to 6

Press the DIRECT button # (1 to 6) with the

same number as the CD playing.

ꢀꢀWhen playing a disc 7 to 12 (only when a 12

disc CD changer is used.)

1. When you press the RPT button 7 for 1 sec-

ond or longer, disc repeat play starts.“D-RPT”

lights in the display.

Press the DIRECT button # (7 to 12) with the

same number as the CD playing for 1 second or

longer.

2. To cancel disc repeat play, press the RPT

button 7 again. “D-RPT” goes off from the

display and the unit returns to normal play

from the track being played.

Scan play

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled

or the mode is changed.

Random play

The random play selects and plays individual

tracks on the disc in no particular order.This func-

tion continues automatically until it is cancelled

or the mode is changed.

∗ The scan play is useful when you want to select a

desired track.

1. Press the SCN button 5 to start scan play.

2. Press the SCN button 5 again to cancel the

1. When you press the RDM button 8, random

scan play. Current track continues to play.

play starts. “RDM” lights in the display.

2. To cancel random play, press the RDM but-

ton 8 again.“RDM” goes off from the display

and the unit returns to normal play.

Disc scan play

The disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected CD changer.This function contin-

ues automatically until it is cancelled or the mode

is changed.

Disc random play

The disc random play selects and plays individual

tracks or discs automatically in no particular or-

der. This function continues automatically until it

is cancelled or the mode is changed.

∗ The disc scan play is useful when you want to se-

lect a desired CD.

1. Press the SCN button 5 for 1 second or longer

1. When you press the RDM button 8 for 1 sec-

ond or longer, disc random play starts. “D-

RDM” lights in the display.

to start disc scan play.

2. Press the SCN button 5 again to cancel disc

scan play. Normal disc play continues on the

current track.

2. To cancel disc random play, press the RDM

button 8 again. “D-RDM” goes off from the

display and the unit returns to normal play

from the track being played.

VRX6 3 0

MD Changer Operations

Notes:

MD changer functions

• When the disc title is within 16 characters, the title

is scrolled immediately.

• If the track title is shorter than 16 characters, the

track titles does not scroll.

When an optional MD changer is connected

through the CeNET cable, this unit controls all

MD changer functions.This unit can control a total

of 2 changers (MD and/or CD and/or DVD).

Press the FNC button 1 and select the MD

changer mode to start play. If 2 MD changers are

connected, press the FNC button 1 to select

the MD changer for play.

Selecting an MD

Each of the DIRECT button # corresponds to

an MD loaded into the MD changer.

Press the DIRECT button # (1 to 6) and select

the desired MD.

∗ If “NO DISC” appears in the display, load MDs into

the MD changer.

Selecting a track

ꢀꢀTrack-up

Pausing play

1. Press the PLAY/PAUSE button 3 to pause

play. “PAUSE” appears in the display.

1. Press the right side of the SEARCH button

2 to move ahead to the beginning of the next

track.

2. To resume play, press the PLAY/PAUSE but-

ton 3 again.

2. Each time you press the right side of the

SEARCH button 2, the track advances ahead

to the beginning of the next track.

Switching disc titles and track titles

This unit can display disc titles and track titles

already entered on MDs. Titles up to 128 char-

acters long can be displayed by scrolling the titles.

ꢀꢀTrack-down

1. Press the left side of the SEARCH button 2

to move back to the beginning of the current

track.

∗ Titles cannot be entered for MDs with this unit.

When the panel is closed:

2. Press the left side of the SEARCH button 2

twice to move to the beginning of the previ-

ous track.

1. Press the DISP button @ to show the SUB

display.The disc title or track title is displayed.

2. Each time you press and hold the DISP but-

ton @ for 1 second or longer, the display

toggles between the disc title and the track

title.

Fast-forward/Fast-backward

ꢀꢀFast-forward

When the panel is open:

Press and hold the right side of he SEARCH but-

ton 2 for 1 second or longer.

Both disc and track titles are displayed.

ꢀꢀFast-backward

Scrolling titles

When a title is longer than 16 characters (or 8

characters if the panel is closed), you can scroll

through it with the following operation.

Press and hold the left side of he SEARCH but-

ton 2 for 1 second or longer.

Top function

When the panel is closed:

The top function plays from the first track (track

No. 1) of the disc.

1. Display the MD title (disc or track).

Press the DIRECT button # (1 to 6) with the

same number that the MD playing.

2. Press the BND button % for 1 second or

longer. The display scrolls through the title.

∗ If an MD is not loaded in a slot of the MD changer,

pressing the DIRECT button # corresponding to

its disc number is invalid.

When the panel is open:

1. Press the TITLE button ( for 1 second or

longer to scroll through the disc title.

2. To scroll the track title, press for 1 second or

longer the TITLE button ( within 30 seconds

after scrolling the disc title.

VRX6 3 0

MD Changer Operations

Scan play

Random play

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled

or the mode is changed.

The random play selects and plays individual

tracks on the disc in no particular order.This func-

tion continues automatically until it is cancelled

or the mode is changed.

∗ The scan play is useful when you want to select a

desired track.

1. When you press the RDM button 8, random

play starts. “RDM” lights in the display.

1. When you press the SCN button 5, scan play

2. To cancel random play, press the RDM but-

ton 8 again.“RDM” goes off from the display

and the unit returns to normal play.

starts.

2. Press the SCN button 5 again to cancel the

play. Current track continues to play.

Disc random play

Disc scan play

The disc random play selects and plays individual

tracks or discs automatically in no particular or-

der.This function continues automatically until it

is cancelled or the mode is changed.

The disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected MD changer. This function con-

tinues automatically until it is cancelled or the

mode is changed.

1. When you press the RDM button 8 for 1 sec-

ond or longer, random play starts. “D-RDM“”

lights in the display.

∗ The disc scan play is useful when you want to se-

lect a desired MD.

2. To cancel random play, press the RDM but-

ton 8 again. “D-RDM” goes off from the dis-

play and the unit returns to normal play from

the track being played.

1. When you press the SCN button 5 for 1 sec-

ond or longer, disc scan play starts.

2. To cancel disc scan play, press the SCN but-

ton 5 again. Normal disc play continues on

the current track.

Repeat play

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled or the mode is changed.

1. When you press the RPT button 7, repeat

play starts. “RPT” lights in the display.

2. To cancel repeat play, press the RPT button

7 again.“RPT” goes off from the display and

the unit returns to normal play.

Disc repeat play

After all the tracks on the current disc have been

played, the disc repeat play automatically replays

the current disc over from the first track.This func-

tion continues automatically until it is cancelled

or the mode is changed.

1. When you press the RPT button 7 for 1 sec-

ond or longer, disc repeat play starts.“D-RPT”

lights in the display.

2. To cancel disc repeat play, press the RPT

button 7 again. “D-RPT” goes off from the

display and the unit returns to normal play

from the track being played.

VRX6 3 0

DVD Changer Operation

DVD changer functions

When an optional DVD changer is connected

through the CeNET cable.

Switching to a next disc(Disc Up

function)

The disc up function plays from the first track

(track No1) of the next disc.

In this case, this unit only provides a part of the

DVD changer functions. As for other operations

not written in this manual, operates with a remote

control unit provided with your DVD changer. Refer

to the DVD changer owners’manual for details.

1. Press the BND button %.

2. Each time you press the BND button %, the

disc changes to the next disc.

This unit can control a total of 2 changers (CD

or MD or DVD).

Changing over display size

∗ This function is available only when the panel is

open.

Press the FNC button 1 and select the DVD

changer mode to start play.

∗ If “NO MAGAZINE” appears in the display, insert

the magazine into the DVD changer.

“DISC CHECKING” appears in the display while

the player loads (checks) the magazine.

Notes:

• This function is not available while you are driving.

• Switch to the VTR/TV/DVD video/DVD changer

mode you see.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot.

Then, reinsert the magazine back into the DVD

changer.

1. Press the DISP button @ for 1 second or

longer to change over the monitor display

size. Each time you press the DISP button

@, the monitor display size changes in the

following order:

Pausing Play

1. Press and hold the PLAY/PAUSE button 3

to pause play. “PAUSE” appears in the dis-

play.

“NORMAL” ꢀ “WIDE” ꢀ “F.WIDE” ꢀ

“CINEMA” ꢀ “NORMAL”

ꢀ “NORMAL”: (normal display)

2. To resume play, press the PLAY/PAUSE but-

ton 3 again.

There is a black area at both right and left

ends of a display. In case of normal TV

broadcasting (4:3), the image can be shown

without being cut or deformed.

∗ When the panel is open, the same operation

is also available by using the PLAY/PAUSE

button 3 in the panel.

ꢀ “WIDE”: (wide mode)

The image at right and left ends in a display

elongates horizontally.

Slow Play (DVD video & video CD)

1. Press and hold the PLAY/PAUSE button 3

then press and hold the d button 2. While

the button is being pressed, slow playback

continues at the speed 1/2 times the normal

playback.

ꢀ “F.WIDE”: (full wide mode)

The whole image elongates horizontally.

ꢀ “CINEMA”: (cinema mode)

The image at both top and bottom in a dis-

play disappears.

∗ Slow playback cannot be performed in the

backward direction. In addition, audio cannot

be reproduced during slow playback.

Notes:

• When a normal 4:3 size image, not being a wide

one, is viewed by displaying it fully on a wide moni-

tor display in a wide mode or a full-wide mode, a

part of the peripheral image will be lacking or de-

formed. In deference to the intention of producer,

an original image can be viewed in a normal mode.

Selecting a disc

1. Each of the DIRECT buttons # corresponds

to a disc loaded into the magazine.

2. Press the corresponding DIRECT buttons #

(1 to 6) to select the desired disc.

• During superimposed display, it becomes a full-wide

mode.

VRX6 3 0

DVD Changer Operation

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous chapter.

DVD-Video Operation

Showing the DVD menu

1. Press the TITLE button ( during playback.

The DVD menus appears.

• The unit may return to the menu screen

when the right or left side of the SEARCH

button 2 is pressed.

The displayed contents may differ, depending

on the DVD software.

• Example showing menu display

Fast forward and fast backward

1. Press and hold the right or left side of the

SEARCH button 2 during playback.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

16-time faster 3 seconds later. Release the

button, and the normal speed is restored.

Notes:

• No audio is reproduced during fast forward

and fast rewind operation.

Using the title menu

On DVD discs containing two or more titles, you

can select from the title menu for playback.

• The fast forward and fast rewind speed may

differ depending on the disc.

• The menu screen may appear when the button

is pressed.

1. Press and hold the TITLE button ( button

for 1 second or longer during playback.

The title menu screen appears.

Scan playback

Scans and plays back all chapters recorded on

the DVD-Video, the first 10 seconds for each.

• Press the TITLE button ( button, and

playback resumes from the scene played

back before TITLE button ( button is

pressed.

1. Press the SCN button 5.

2. Press the SCN button 5 again and scan

• Depending on the disc, the title menu can-

not be called.

playback is turned off.

2. Operate the JOYSTICK ¡ upward, down-

Chapter repeat playback

This operation plays back chapters recorded on

the DVD-Video repeatedly.

ward, leftward or rightward to select an item.

• Depending on the disc, items cannot be

selected with the ten-key buttons on the

DVD changer remote control unit.

1. Press the RPT button 7.

2. Press the RPT button 7 again and repeat

playback is turned off.

Skipping a chapter(searching)

About chapter

Title repeat playback

This operation plays back titles recorded on the

DVD-Video repeatedly.

Chapter means a small segment to divide the

data area of the disc.

1. Press the right or left side of the SEARCH

1. Press and hold the RPT button 7 for 1 sec-

button 2 during playback.

ond or longer.

Chapters are skipped, as many as the times

the button is pressed, and playback starts.

2. Press the RPT button 7 again and repeat

playback is turned off.

• Press the d button 2, and playback

starts from the beginning of the next chap-

ter.

• Press the a button 2, and playback

starts from the beginning of the current

chapter.

VRX6 3 0

DVD Changer Operation

Scan playback

This operation plays back all tracks on the disc,

the first 10 seconds for each.

Watching a video CD

Showing the V-CD menu (for V-CD

discs with Play Back Control)

This key does not function on some discs.

1. Press the SCN button 5.

2. Press the SCN button 5 again and scan

playback is turned off.

1. Press the TITLE button ( during playback.

∗ If you are playing a disc with PBC and the

PBC function is engaged, this operation

cannot be performed.

The V-CD menu appears.

The displayed contents may differ, depending

on the V-CD software.

• Example showing menu display

Repeat playback

This operation plays back one track recorded on

the video CD repeatedly.

1. Press the RPT button 7.

2. Press the RPT button 7 again and repeat

playback is turned off.

∗ If you are playing a disc with PBC and the

PBC function is engaged, this operation

cannot be performed.

∗ To select the menu contents, press the 10 key

(DVD changer Remocon) according to the disc

contents menu.

Random playback

This operation plays back all track on the disc in

no particular order.

Skipping a track (searching)

1. Press the right or left side of the SEARCH

button 2 during playback.

1. Press the RDM button 8.

2. Press the RDM button 8 again and random

The track is skipped, and playback starts.

playback is turned off.

• Press the d button 2, and playback

∗ If you are playing a disc with PBC and the

PBC function is engaged, this operation

cannot be performed.

starts from the beginning of the next track.

• Press the a button 2, and playback

starts from the beginning of the current

track.

Listening to a CD

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

Skipping a track (searching)

1. Press the right or left side of the SEARCH

button 2 during playback.

∗ This operation cannot be performed on some

discs with PBC

The tracks are skipped, as many as the

times the button is pressed, and playback

starts.

Fast forward and fast backward

1. Press and hold the right or left side of the

SEARCH button 2 during playback.

• Press the d button 2, and playback

starts from the beginning of the next track.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

• Press the a button 2, and playback

starts from the beginning of the current

track.

16-time faster 3 seconds later. Release the

button, and the normal speed is restored.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

Notes:

• No audio is reproduced during fast forward

and fast rewind operation.

• The unit may return to the menu screen when

the button is pressed.

VRX6 3 0

DVD Changer Operation

• Press the a button 2, and playback

starts from the beginning of the current

track.

Fast forward and fast backward

1. Press and hold the right or left side of the

SEARCH button 2 during playback.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

8-time faster 3 seconds later. Release the

button, and the normal speed is restored.

∗ This operation skips the track over the folder.

Fast forward and fast backward

1. Press and hold the right or left side of the

SEARCH button 2 during playback.

Scan playback

This operation plays back all tracks on the disc,

the first 10 seconds for each.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

8-time faster 3 seconds later. Release the

button, and the normal speed is restored.

1. Press the SCN button 5.

2. Press the SCN button 5 again and scan

playback is turned off.

Track repeat playback

This operation plays back one track recorded on

the CD repeatedly.

Track scan playback

This operation plays back all files recorded on

the disc, about 10 seconds for each.

1. Press the RPT button 7.

1. Press the SCN button 5.

2. Press the RPT button 7 again and repeat

2. Press the SCN button 5 again and scan

playback is turned off.

Disc repeat playback

This operation plays back all tracks on the disc

repeatedly (with music CDs only).

Folder scan playback

This operation plays back the first files of all

folders on the MP3 disc, about 10 seconds for

each.

1. Press and hold the RPT button 7 for 1 sec-

ond or longer.

1. Press and hold the SCN button 5 for 1 sec-

2. Press the RPT button 7 again and repeat

ond or longer.

playback is turned off.

2. Press the SCN button 5 again and scan

playback is turned off.

Random playback

This operation plays back all track on the disc in

no particular order.

Track repeat playback

This operation plays back the file currently being

played back repeatedly.

1. Press the RDM button 8.

2. Press the RDM button 8 again and random

1. Press the RPT button 7.

playback is turned off.

2. Press the RPT button 7 again and repeat

playback is turned off.

Listening to an MP3

Folder repeat playback

This operation plays back files in an MP3 folder

repeatedly..

Skipping a track (searching)

1. Press the right or left side of the SEARCH

button 2 during playback.

1. Press and hold the RPT button 7 for 1 sec-

The tracks are skipped, as many as the

times the button is pressed, and playback

starts.

ond or longer.

2. Press the RPT button 7 again and repeat

playback is turned off.

• Press the d button 2, and playback

starts from the beginning of the next track.

VRX6 3 0

DVD Changer Operation

Track random playback

TV Operations

TV functions

This operation plays the file in the folder in ran-

dom order.

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner.

1. Press the RDM button 8.

2. Press the RDM button 8 again and random

playback is turned off.

WARNING

For your safety, the driver should not watch

theTV or operate the controls while driving.

Please note that watching and operating the

TV while driving are prohibited by law in

some countries.

Folder random playback

This operation plays back tracks recorded on

the disc in no particular order.

1. Press and hold the RDM button 8 for 1 sec-

ond or longer.

2. Press the RDM button 8 again and random

Watching TV

Notes:

playback is turned off.

• For your safety, the VRX630 has a safety function

which turns off the picture when the car is mov-

ing, so only the audio can be heard. The picture

can only be watched when the car is stopped and

the parking break is applied.

Selecting a file (track) on the

screen

1. Press the TITLE button ( during playback.

Files (tracks) are displayed.

1. Press the FNC button 1 and select the TV

2. Operate the JOYSTICK ¡ upward or down-

ward to select a file, and confirm it by press-

ing ENT at the center of the JOYSTICK ¡.

mode.

2. Press the BND button % to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles be-

tween TV1 and TV2.

∗ If no further operation is performed for 7 sec-

onds, the STANDARD screen is returned.

Notes:

3. Press the right or left side of the SEARCH

• With the panel of the main unit closed, the remote

control unit supplied with the DVD changer cannot

be operated.

button 2 to tune in the desired TV station.

• While the panel of the main unit is closed, “DVD A/

C” is shown on the information panel.

• While the car is moving, the panel displays the name

of the current mode, time and “AUDIO PROGRAM

ONLY”.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12V video cassette player (VCP) or video cas-

sette recorder (VCR) to the TV tuner input termi-

nal.

1. Press the TV/VTR button 8 and select the

VTR.

2. To return to the TV broadcast, press the TV/

VTR button 8 again.

Tuning

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

VRX6 3 0

TV Operations

Seek tuning

∗ Press and hold one of the PRESET buttons #

for 2 seconds or longer to store the current sta-

tion into the preset memory.

1. Press the BND button % and select the de-

sired TV band (TV1 or TV2).

∗ If “MANU” is lit in the display (or when the panel

is closed, if the indicator“SRCH”is not lit), press

and hold the BND button % for 1 second or

longer. “MANU” in the display goes off (or when

the panel is closed, the indicator “SRCH” lights)

and seek tuning is now available.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of the PRESET buttons

# for 2 seconds or longer to store the cur-

rent station to that preset memory.

2. Press the right or left side of the SEARCH

button 2 to automatically seek a station.

Press the right side of the SEARCH button

2 to automatically tune up the frequency band

to the next available TV station; press the left

side to automatically tune down.

Auto store

Auto store selects 6TV stations automatically and

stores each one into a preset memory.

If there are not 6 stations with good reception,

stations previously stored in memory remain and

only the strong stations are stored into memory.

Manual tuning

There are 2 ways available:Quick tuning and step

tuning. When you are in the step tuning mode,

the frequency changes one step at a time.In quick

tuning mode, you can quickly tune the desired

frequency.

1. Press the BND button % and select the de-

sired TV band. (TV1 or TV2)

2. Press and hold the AS/PS button 5 for 2 sec-

onds or longer.The stations with good recep-

tion are automatically stored to the PRESET

buttons # .

1. Press the BND button % and select the de-

sired band. (TV1 or TV2)

∗ If “MANU” is not lit in the display (or when the

panel is closed, if the indicator “SRCH” is lit),

press and hold the BND button % for 1 sec-

ond or longer. “MANU” appears in the display

(or when the panel is closed, the indicator

“SRCH” goes off) and manual tuning is now

available.

Preset scan

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for desired TV station in memory.

1. Press the AS/PS button 5.

2. Tune into a station.

2. When the desired channel is received, press

ꢀ Quick tuning:

the AS/PS button 5 again.

Press and hold the right or left side of the

SEARCH button 2 for 1 second or longer to tune

in a station.

Switching the VTR system between

NTSC and PAL

∗ This function is enabled only when the panel is

open.

Switch to the VTR or DVD changer mode you

use.

ꢀ Step tuning:

Press the right or left side of the SEARCH but-

ton 2 to manually tune in a station.

Note:

• Manual tuning is cancelled if you do not operate

the unit for 7 seconds longer.

1. Press the ADJ button * to switch to the ad-

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

Recalling a preset station

ward to move the cursor to “VTR N/P”.

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favor-

ite TV stations and store them in memory for later

recall.

3. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to select “NTSC” or

“PAL”.

4. Press the ENT at the center of the JOYSTICK

¡ to set the selected VTR or DVD changer

mode.

1. Press the BND button % and select the de-

sired TV band. (TV1 or TV2)

2. To recall a stored TV station, press the de-

sired PRESET button # to select that sta-

tion.

VRX6 3 0

TV Operations

6. When the adjustment is made, operate the

JOYSTICK ¡ rightward or leftward to move

the cursor to “MENU”.Then press the ENT at

the center of the JOYSTICK ¡ to return to

the adjustment selection display.

Setting the TV diver

∗ This function is enabled only when the panel is

open.

∗ Normally use the TV diver with the “ON” position.

You can change the reception setting for the TV

antenna connected to the TV tuner.

1. Press the ADJ button * to switch to the ad-

Changing over display size

justment selection display.

∗ This function is available only when the panel is

open.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “TV DIVER”.

Notes:

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

the selected reception setting.

• This function is not available while you are driving.

• Switch to the VTR/TV/DVD video mode you see.

1. Press the WIDE button 7 to change over the

monitor display size. Each time you press

the WIDE button 7, the monitor display size

changes in the following order:

ꢀ ON:

Sets reception emphasizing the visual.

ꢀ OFF:

Sets the diver setting to OFF.

“NORMAL” ꢀ “WIDE” ꢀ “F.WIDE” ꢀ

“CINEMA” ꢀ “NORMAL”

4. Press the ADJ button * to return to the pre-

vious mode.

ꢀ “NORMAL”: (normal display)

There is a black area at both right and left

ends of a display. In case of normal TV

broadcasting (4:3), the image can be shown

without being cut or deformed.

Adjusting the brightness and tone

of color

Notes:

• This operation is available only when the car is

stopped and the parking brake is applied.

• This function is not available when the display is

stored.

ꢀ “WIDE”: (wide mode)

The image at right and left ends in a display

elongates horizontally.

• The HUE setting can be adjusted only when the

NTSC mode is selected.

1. Press the BND button % to switch to the ad-

ꢀ “F.WIDE”: (full wide mode)

The whole image elongates horizontally.

ꢀ “CINEMA”: (cinema mode)

justment selection display.

The image at both top and bottom in a dis-

play disappears.

2. Operate the JOYSTICK ¡ upward or down-

ward to select the option “MONI ADJ”(by mov-

ing the cursor).

Notes:

3. Press the ENT at the center of the JOYSTICK

• When a normal 4:3 size image, not being a wide

one, is viewed by displaying it fully on a wide moni-

tor display in a wide mode or a full-wide mode, a

part of the peripheral image will be lacking or de-

formed. In deference to the intention of producer,

an original image can be viewed in a normal mode.

¡.

4. Operate the JOYSTICK ¡ rightward or left-

ward to select “BRIGHT”,“COLOR” or “HUE”

(by moving the cursor).

ꢀ “BRIGHT“:

• During superimposed display, it becomes a full-wide

mode.

Adjust the brightness of the display.

ꢀ “COLOR“:

Adjusts the color saturation.

ꢀ “HUE“:

Adjusts the tone of color (red is emphasized

or green is emphasized.)

5. Operate the JOYSTICK ¡ upward or down-

ward to adjust a level.

VRX6 3 0

CCD Camera

Operation of External Visual

Devices (VISUAL Mode)

Monitoring the CCD camera

The CCD camera can be connected to this unit.

For the power supply of the camera, mount the

power box sold separately (CCA-188).

External visual devices such as DVD and VTR

devices can be connected to the DIN 8-pin ter-

minal, and the image and sound can then be

played using VISUAL mode.

Notes:

• This function is not available when the display is

stored.

• Refer to the subsection “Sample System 3” in

“9. SAMPLE SYSTEMS” section.

Notes:

• While driving, the image of the VISUAL Mode is

turned OFF and only sound is played.

• Images can only be played when the vehicle is sta-

tionary with the parking brake ON.

1. With the panel open, push VISUAL button )

to switch from radio, TV, CD/MD changer

mode to VISUAL mode.

2. To exit VISUAL Mode and return to the previ-

ous mode, press VISUAL button ) again.

∗ The image format played in VISUAL mode can

be set to NTSC or PAL format. The setting

method is the same as for the TV. Please refer

to the TV explanation.

∗ In VISUAL mode, the picture quality can be

adjusted. The setting method is the same as

for the TV. Please refer to the TV explanation.

Switching to Composite

Screen

∗ The display panel can be switched to a composite

screen to lock the monitor.

1. When the panel is open, press the OPEN/

MONI LOCK button ! to switch to the com-

posite screen.

2. When the panel is open and the composite

screen is shown, press the MONI LOCK but-

ton ! again to return to the previous screen.

VRX6 3 0

Other Functions

4. Operate the JOYSTICK ¡ upward or down-

ward, rightward or leftward and move the cur-

sor to the character to be entered. Press the

ENT at the center of the JOYSTICK ¡.

Always turning on the button

illumination on the operation panel

Note:

• The following operation is enabled when the panel

∗ When the cursor is at the lower/upper limit of

the display, operate the JOYSTICK ¡ upward

or downward, the character string of the follow-

ing line appears.

“-->” : Space

“<--” : Backspace

“--I--” : Centering

is open.

The button illumination on the operation panel

when the display is turned upward, can be

switched between “ON” and “OFF”.

ꢀ “ON”:Button illumination on the operation panel

turns on for 5 seconds;

ꢀ “OFF” : Button illumination is always on when

the power is turned on;

5. Repeat the step 4 to enter the complete title.

1. When the panel is open, press the ADJ button

6. Press and hold the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to store

the title into memory and cancel title input mode.

* to show the adjustment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward and select “AUTO ILL” to show “ON” and

“OFF” in the menu bar.

Title list play

3. Operate the JOYSTICK ¡ rightward or left-

ward to select either position to be set and

press the ENT at the center of the JOYSTICK

¡ for setting.

You can display a list of titles, then select the

disc or broadcast station to listen to from that

list.

∗ You can not display a title list with the unit in

Seek, Preset Scan, Auto store (Tuner or TV),

Scan, Repeat or Random (CD changer or MD

changer) mode. Cancel those operation modes

before to display a title list.

4. Press the ADJ button * to return to the pre-

vious mode.

∗

To set “ON” again, switch “OFF” to “ON” manually.

1. With the unit in radio, CD/MD changer, TV,

press the TITLE button (. A title list is dis-

played. The following functions can be car-

ried out in a title list display.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for Radio starions,TV sta-

tions and CDs.The numbers of titles that can be

entered for each mode are as follows.

ꢀ TUNER: A title of a channel stored in the

presets 1 to 6 or a channel number is dis-

played.

Mode

Number of titles

30 titles

TUNER mode

TV mode

ꢀ CD/MD changer: DISC titles for discs 1

to 6 are displayed (By changing over a dis-

play page in case of 12-CD changer, disc 7

to 12 can be displayed). When there is not

any disc in a changer, “---------” is displayed.

15 titles

CD changer mode

DCZ625 connected

CDC655z connected

CDC655Tz connected

CDC1255z connected

Number of titles

100 titles

60 titles

ꢀ TV: A title of a channel stored in the pre-

sets 1 to 6 or a channel number is displayed.

100 titles

50 titles

2. Operate the JOYSTICK ¡ upward or down-

ward to select one of the items 1 to 6. Press

ENT at the center of the JOYSTICK ¡ to re-

produce the selected broadcast station or

disc.

∗ You cannot enter titles with the unit in Seek, Pre-

set Scan, Auto store (TUNER, TV), Scan, Repeat

or Random (CD changer, MD changer) mode. Can-

cel each of those operations before entering titles.

1. Press the FNC button 1 to select the mode

you want to enter a title (TUNER, CD changer

or TV).

∗ In case of 12-CD changer, move the cursor to

disc 6 and then operate the JOYSTICK ¡

downward to change over to a list display of

discs 7 to 12.

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

3. Press the TITLE button ( again to return to

the STANDARD display.

3. If you press and hold the TITLE button ( for

1 second or longer, the display switches to

the title input mode display.

VRX6 3 0

Other Functions

Clock Adjustment

DSP operations

DSP control function

1. Press the ADJ button * to display the ad-

If the DSP (DPH910), sold separately, is con-

nected to this unit using the CeNET cable, all

the functions of the DSP can be controlled.

justment selection display.

2. Move the JOYSTICK ¡ up or down to select

CLOCK, then press ENT at the center of the

JOYSTICK ¡ to display the clock adjust-

ment display.

∗ When the DSP is connected, an external amplifier

is required.

∗ DSP control can all be operated only when the

panel is open.

3. Move the JOYSTICK ¡ left or right to select

HR or MIN, then move the JOYSTICK ¡ up

or down to adjust the time.

DSP functions

There are 2 modes available in DPH910, stan-

dard mode and professional mode. Choose one

of them and adjust the sound field and the

sound quality.

∗ The time is displayed in 12-hour format.

4. Pressing ENT at the center of the JOYSTICK

¡ when the cursor is above HR or MIN saves

the adjusted value in memory and simulta-

neously returns the display to the previous

display (adjustment selection display).

ꢀ Functions common to each mode:

Such as auto loudness, subwoofer etc.

ꢀ Standard mode:

To cancel clock adjustment before comple-

tion, use the JOYSTICK ¡ to move the cur-

sor to MENU, then press ENT at the center

of the JOYSTICK ¡.

Adjustment using the graphic equalizer function

and the DSP function.

ꢀ Professional mode:

Adjustment using the space equalizer function

and the parametric equalizer function.

Triggered audio mute for cellular

telepones

This unit requires special wiring to mute the au-

dio signal automatically when a cellular tele-

phone rings in the car.

∗ When the standard mode is selected, adjustment

for the professional mode cannot be made. On

the contrary, when the professional mode is se-

lected, adjustment for the standard mode cannot

be made.

∗ This function is not compatible wiht all cellular

telepones Contact your local authorized

Clarion dealer for information on proper instal-

lation and compatibility.

∗ For details on functions of each mode, refer to the

owner’s manual supplied with the DPH910.

∗ Hereafter the graphic equalizer is referred to as a

G.EQ, the space equalizer referred to as VSE and

the parametric equalizer referred to as P.EQ.

Operations common to each

mode

Output adjustment of auto loud-

ness, subwoofer and playback

band

1. Press the ADJ button * to switch to the ad-

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “SOUND” and press the ENT

at the center of the JOYSTICK ¡ to change

into the Sound adjustment display. In the

Sound adjustment display “A.LD LEVEL”,

“W.OUT”, “W.LPF”, “HPF”, “T.TONE” are

listed.

Operate the JOYSTICK ¡ rightward or leftward

to select an item to be adjusted.

3. To make an adjustment on:

VRX6 3 0

DSP operations

Woofer level adjustment

You can adjust an output sound level of

subwoofer.

ꢀ Auto loudness adjustment

Operate the JOYSTICK ¡ upward or downward

to adjust an auto loudness level (0 to 10).

ꢀ Woofer out adjustment

1. Press the A-M button & to show the AUDIO-

MODE display.

Select woofer output out of “STEREO”,

“MONO”, or “OFF”.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “W-VOL” and press the ENT at

the center of the JOYSTICK ¡ to show the

woofer level adjusting display.

Operate the JOYSTICK ¡ upward or downward

to select a desired item, and then press the ENT

at the center of the JOYSTICK ¡ to set it.

3. Operate the JOYSTICK ¡ upward or down-

ꢀ Woofer LPF adjustment

ward to adjust the level (0 to 14).

Select woofer LPF slope out of “50Hz”, “80Hz”,

4. After adjustment, operate the JOYSTICK ¡

rightward or leftward to select “MENU” and

press the ENT at the center of the JOY-

STICK ¡ return to the AUDIO-MODE dis-

play.

“120Hz”.

Operate the JOYSTICK ¡ upward or downward

to select a desired item, and then press the ENT

at the center of the JOYSTICK ¡ to set it.

ꢀ HPF adjustment

Select HPF slope out of “50Hz”, “80Hz”,

Standard mode/Setting the

listening position

“120Hz”, or “OFF”.

Operate the JOYSTICK ¡ upward or downward

to select a desired item, and then press the ENT

at the center of the JOYSTICK ¡ to set it.

Selection of listening position

1. Press the A-M button & to show the AUDIO-

ꢀ Test Tone Output

Select Test Tone Output

MODE display.

Operate the JOYSTICK ¡ upward or downward

to select a desired item, and then press the ENT

at the center of the JOYSTICK ¡ to produce a

test tone.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “POSITION”. “SELECT” and

“DETAIL” are displayed in the menu bar.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “SELECT”, and press the ENT

at the center of the JOYSTICK ¡ to show

Position selecting display.

4. After adjustment (setting), operate the JOY-

STICK ¡ rightward or leftward to move the

cursor to “MENU” and press the ENT at the

center of the JOYSTICK ¡ to return to the

adjustment selection display.

4. Operate the JOYSTICK ¡ upward or down-

ward and press the ENT at the center of the

JOYSTICK ¡ to select a desired position.

5. Press the ADJ button * again to return to

the STANDARD display.

5. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “MENU”, and

press the ENT at the center of the JOY-

STICK ¡ to return to the AUDIO-MODE dis-

play.

Selecting the standard mode or the

professional mode

∗ The factory default setting is “STD”.

1. Press the ADJ button * to switch to the ad-

Detail adjustment of listening

position

1. Press the A-M button & to show the AUDIO-

justment selection display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSF/EQ”. “STD” and “PRO”

items are displayed in the menu bar.

MODE display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select a desired mode and press the

ENT at the center of the JOYSTICK ¡ to set

the mode thus selected.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “POSITION”. “SELECT” and

“DETAIL” are displayed in the menu bar.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “DETAIL”, and press the ENT

at the center of the JOYSTICK ¡ to show

Position Detail adjusting display.

4. After setting, press the ADJ button * again

to return to the STANDARD display.

VRX6 3 0

DSP operations

4. Operate the JOYSTICK ¡ rightward or left-

4. In the Pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to se-

lect P1 to P6, and press the ENT at the

center of the JOYSTICK ¡ to call corre-

sponding G.EQ pattern. In this display,

pressing the No. button in correspondence

to the preset button # can also call the

G.EQ pattern.

ward to select “BALANCE” or “FADER”.

5. Operate the JOYSTICK ¡ upward or down-

ward to make an adjustment.

6. Operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “MENU”, and

press the ENT at the center of the JOY-

STICK ¡ to return to the AUDIO-MODE dis-

play.

∗ After selecting P1 to P6 by the JOYSTICK

¡, press ENT at the center of the JOY-

STICK ¡ for 2 seconds or longer to copy the

selected pattern to the USER pattern.

Standard mode/G.EQ

operations

∗

Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show G.EQ

adjusting display, in which the properties of

currently selected pattern can be adjusted.

Note:

• The adjustment made in standard mode is not re-

flected in the adjustment in professional mode. Re-

spectively, the adjustment made in professional

mode is not reflected in the adjustment in standard

mode.

∗ By pressing the BND button % in BASIC

pattern selecting display or USER pattern

selection/memory display you can switch be-

tween the two patterns, BASIC and USER.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT

at the center of the JOYSTICK ¡ to return

to the AUDIO-MODE display.

G.EQ effect ON/OFF

* The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EQ ON/OFF”. “ON” and “OFF”

items are displayed in the menu bar.

Setting and storing G.EQ Proper-

ties/Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous

procedure (Calling G.EQ BASIC Pattern/

USER Pattern) to show BASIC pattern se-

lecting display or USER pattern selection/

memory display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

it.

4. After the setting, press the A-M button &

2. Operate the JOYSTICK ¡ leftward and

rightward to select “EDIT”, and press the

ENT at the center of the JOYSTICK ¡ to

show the G.EQ adjusting display.

again to return to the STANDARD display.

Note:

• If the G.EQ effect is set to OFF, the adjustment made

in “G.EQ operations” is not reflected in the music

source.

3. When some frequency to be adjusted is se-

lected by operating the JOYSTICK ¡ right-

ward or leftward in the G.EQ adjusting dis-

play, a gain setting value at the selected fre-

quency is displayed.

Calling G.EQ BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

4. Operate the JOYSTICK ¡ upward or

MODE display.

downward to adjust the G.EQ GAIN.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EQ MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

∗ By pressing the preset buttons # once in the

G.EQ adjusting display, the setting value for

currently stored USER pattern is obtained.

5. After making adjustments to a desired pat-

tern by repeating the operations of items 3

and 4, operate the JOYSTICK ¡ rightward

or leftward to move the cursor to “RTN”,

and press the ENT at the center of the JOY-

STICK ¡ to change over to the BASIC/

USER pattern selection/memory display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

VRX6 3 0

DSP operations

6. Operate the JOYSTICK ¡ rightward or left-

ward in the BASIC/USER pattern selection/

memory display to select USER memory P1

to P6 to be stored, and press the ENT at the

center of the JOYSTICK ¡ for 2 seconds or

longer to store the adjusted G.EQ pattern to

the USER memory.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding DSF

mode. In this display, pressing the No. button

in correspondence to the preset buttons #

can also call the DSF mode.

∗ By pressing the preset button # 1 to 6 for 2

seconds or longer in the G.EQ adjusting dis-

play, the G.EQ pattern can be stored in the

USER memory.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into

the Title Input display.

∗ After selecting P1 to P6 by operating the JOY-

STICK ¡, press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to copy

the selected pattern to the USER pattern.

∗ For title inputting method, refer to the section

∗ Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show DSF

adjusting display, in which the properties of

currently selected pattern can be adjusted.

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change

into the AUDIO-MODE display.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into

the Title Input display.

Standard mode/DSF

operations

∗ For title inputting method, refer to the section

“Entering titles”.

DSF effect ON/OFF

∗ The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change

into the AUDIO-MODE display.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSF ON/OFF”. “ON” and

“OFF” items are displayed in the menu bar.

Professional mode/VSE

operations

3. Operate the JOYSTICK ¡ rightward and left-

ward to select “ON” or “OFF” and press the

ENT at the center of the JOYSTICK ¡ to set

it.

Note:

• The adjustment made in professional mode is not

reflected in the adjustment in standard mode. On

the contrary, the adjustment made in standard mode

is not reflected in the adjustment in professional

mode.

Note:

• If the DSF effect is set to OFF, the adjustment made

in “DSF operations” is not reflected in the music

source.

VSE effect ON/OFF

∗ The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

Calling DSF BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “VSE ON/OFF”. “ON” and

“OFF” items are displayed in the menu bar.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “DSF MODE”. “BASIC 1”, “BA-

SIC 2” and “USER” items are displayed in the

menu bar.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select “ON”or“OFF”and press the ENT

at the center of the JOYSTICK ¡ to set it.

VRX6 3 0

DSP operations

Note:

3. Select an item to be adjusted by operating

the JOYSTICK ¡ rightward or leftward in the

VSE adjusting display.

• If theVSE effect is set to OFF, the adjustment made

in “VSE operations” is not reflected in the music

source.

“DIFF”

“C.WD”

“C.LG”

ꢀ

DIFFUSE

CAR WIDTHH

CAR LENGTH

Calling VSE BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

4. Operate the JOYSTICK ¡ upward or down-

ward to set each adjusting value.

MODE display.

∗ By pressing the preset buttons # once in the

VSE adjusting display, the setting value for

currently stored USER pattern is obtained.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “VSE MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

5. After making adjustments to a desired pat-

tern by repeating the steps 3 and 4, operate

the JOYSTICK ¡ rightward or leftward to

move the cursor to “RTN”, and press the

ENT at the center of the JOYSTICK ¡ to

change over to the BASIC/USER pattern se-

lection/memory display.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding VSE

pattern. In this display, pressing the No. but-

ton in correspondence to the Preset buttons

# can also call the VSE pattern.

6. Operate the JOYSTICK ¡ rightward or left-

ward in the BASIC/USER pattern selection/

memory display to select USER memory P1

to P6 to be stored, and press the ENT at the

center of the JOYSTICK ¡ for 2 seconds or

longer to store the adjusted VSE pattern to

the USER memory.

∗ After selecting P1 to P6 by operating the JOY-

STICK ¡ rightward or leftward, press the ENT

at the center of the JOYSTICK ¡ for 2 sec-

onds or longer to copy the selected pattern to

the USER pattern.

∗ By pressing the preset buttons # 1 to 6 for 2

seconds or longer in the VSE adjusting dis-

play, the VSE pattern can be stored in the

USER memory.

∗ Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

VSE adjusting display, in which the properties

of currently selected pattern can be adjusted.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into

the Title Input display.

∗ By pressing the BND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

∗ For title inputting method, refer to the section

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change

into the AUDIO-MODE display.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Professional mode/P.EQ

operations

Setting and storing VSE Properties/

Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous pro-

cedure (Calling VSE BASIC Pattern/USER

Pattern) to show BASIC pattern selecting

display or USER pattern selection/memory

display.

P.EQ effect ON/OFF

∗ The factory default setting is “ON”.

1. Press the A-M button & to show the AUDIO-

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “VSE EDIT”, and press the

ENT at the center of the JOYSTICK ¡ to

show the VSE adjusting display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “P.EQ ON/OFF”, “ON” and

“OFF” items are displayed in the menu bar.

VRX6 3 0

DSP operations

3. Operate the JOYSTICK ¡ rightward or left-

ward to select“ON”or“OFF”and press the ENT

at the center of the JOYSTICK ¡ to set it.

3. Select an item to be adjusted by operating

the JOYSTICK ¡ rightward or leftward in the

P.EQ adjusting display.

Note:

4. Operate the JOYSTICK ¡ upward or down-

• If the P.EQ effect is set to OFF, the adjustment made

in “P.EQ operations” is not reflected in the music

source.

ward to set each adjusting value.

∗ By pressing the preset buttons # once in the

P.EQ adjusting display, the setting value for

currently stored USER pattern is obtained.

Calling P.EQ BASIC Pattern/USER

Pattern

1. Press the A-M button & to show the AUDIO-

5. After making adjustments to a desired pat-

tern by repeating the operations of items 3

and 4, operate the JOYSTICK ¡ rightward

or leftward to move the cursor to “RTN”, and

press the ENT at the center of the JOY-

STICK ¡ to change over to the BASIC/

USER pattern selection/memory display.

MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “P.EQ MODE”. “BASIC” and

“USER” items are displayed in the menu bar.

6. Operate the JOYSTICK ¡ rightward or left-

ward in the BASIC/USER pattern selection/

memory display to select USER memory P1

to P6 to be stored, and press the ENT at the

center of the JOYSTICK ¡ for 2 seconds or

longer to store the adjusted P.EQ pattern to

the USER memory.

3. Operate the JOYSTICK ¡ rightward or left-

ward to select the item thus called, and press

the ENT at the center of the JOYSTICK ¡ to

show BASIC pattern selecting display or

USER pattern selection/memory display.

4. In the pattern selecting display, operate the

JOYSTICK ¡ rightward or leftward to select

P1 to P6, and press the ENT at the center of

the JOYSTICK ¡ to call corresponding P.EQ

pattern. In this display, pressing the No. but-

ton in correspondence to the Preset buttons

# can also call the P.EQ pattern.

∗ By pressing the preset buttons # 1 to 6 for 2

seconds or longer in the P.EQ adjusting dis-

play, the P.EQ pattern can be stored in the

USER memory.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into

the Title Input display.

∗ After selecting P1 to P6 by operating the JOY-

STICK ¡, press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to copy

the selected pattern to the USER pattern.

∗ For title inputting method, refer to the section

∗ Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show P.EQ

adjusting display, in which the properties of

currently selected pattern can be adjusted.

“Entering titles”.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

the center of the JOYSTICK ¡ to change

into the AUDIO-MODE display.

∗ By pressing the BND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

Setting and storing P.EQ Proper-

ties/Memory into USER Pattern

1. In the Basic adjustment display or in the

User setting display, press the A-M button &

to show the AUDIO-MODE display.

2. Operate the JOYSTICK ¡ upward or down-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

P.EQ adjusting display.

VRX6 3 0

9. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

Power does not

turn on.

Fuse is blown.

(No sound is

produced.)

Consult your store of purchase.

Incorrect wiring.

Turn off the power, then press the RELEASE lever

6 and remove the DCP.

Press the RESET button for about 2 seconds with

a thin rod.

Nothing happens The microprocessor has

when buttons are malfunctioned due to noise,

pressed.

etc.

Display is not

accurate.

Wipe the dirt off with a soft cloth moistened with

cleaning alcohol.

DCP or main unit connectors

are dirty.

The remote controller does not work unless the

display is open.

The remote

controller does

not work.

The display is not open.

When direct rays of the sun fall on the light-

receptive part of the remote controller, it may not

work.

Direct rays of the sun fall on

the light-receptive part of the

remote controller.

Check the batteries of the remote controller unit.

The batteries of the remote

controller unit are dead or

there is no battery in the

remote controller unit.

Check that the parking brake is applied.

Adjust the brightness properly.

The image is not The parking brake is not

displayed.

pulled.

The display is

dark.

The brightness control is too

low.

The temperature inside the vehicle may be 0˚C or

less. Set to an appropriate temperature (25˚C or

so) and check it again.

The operating condition is

not good.

The display is made dark at night to prevent the

glare (When the headlight of the vehicle is lit in the

daytime, the display gets dark).

The headlight of the vehicle

is lit.

Check that COL and HUE are adjusted properly.

The color of the

display is light or

a shade of color

is not good.

The color is not adjusted

adequately.

Set the NTSC/PAL properly according to the VTR.

When the VTR is Improper NTSC/PAL setting

connected, the

image is

disturbed.

VRX6 3 0

Problem

Cause

Measure

When the TV

tuner is con-

nected, the image

gets unclear.

Bad receiving condition

A radio wave may not reach sufficiently due to

obstruction of mountains or buildings. Check it again

at a place where a radio wave can be received

properly.

The TV tuner has Bad receiving condition

a double or triple

image.

It may be under the influence of radio wave reflected

by mountains or buildings. Check it again after

changing place or direction.

The TV tuner has Presence of jamming

spots or stripes in

the image.

It may be under the influence from automobiles,

streetcar, power cable, neon sign, and so forth.

Check it again after changing place.

There are red,

green, and blue

points in the

display.

This is not a failure, but a phenomenon peculiar to a

liquid crystal panel (The LCD panel is produced

according to technology with very high precision.

Note that, though there are effective pixels of 99.99%

or more, pixel missing or normally lit pixels account

for 0.01%).

VRX6 3 0

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described to eliminate

the problem.

Cause

Error Display

ERROR 2

Measure

A CD inside the CD changer is not loaded. This is a failure of CD changer’s mecha-

nism and consult your store of purchase.

ERROR 3

ERROR 6

ERROR H

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped-

disc.

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the MD Lower the surrounding temperature and

changer is too high and playback has

been stopped automatically.

wait for a while to cool off MD changer.

ERROR 2

ERROR 3

ERROR 6

An MD inside the MD changer is not

loaded.

This is a failure of MD changer’s mecha-

nism and consult your store of purchase.

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped-

disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD

changer.

For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.

If an error display other than the ones described above appears, press the RESET button. If the prob-

lem persists, turn off the power and consult your store of purchase.

∗ When the reset button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are cleared.

VRX6 3 0

11. SPECIFICATIONS

FM Tuner

General

Frequency Range: 87.9 MHz to 107.9 MHz

Power source voltage:

14.4 V DC (10.8 to 15.6 V allowable)

Ground:

Usable Sensitivity: 11 dBf

50dB Quieting Sensitivity: 17 dBf

Alternate Channel Selecitivity: 75 dB

Stereo Separation(1 kHz): 35 dB

Frequency Response(+/-3 dB):

30 Hz to 15 kHz

Negative

Current consumption:

4.0 A (1 W)

Auto Antenna Rated Current:

500 mA less

Dimensions of the Main Unit:

AM Tuner

Frequency Range: 530 kHz to 1710 kHz

7" (178 mm) Width × 2" (50 mm) Height ×

6-7/8" (157 mm) Depth

Usable Sensitivity: 25 µV

Weight of the Main Unit:

1.7 kg

Dimensions of the Remote Control Unit:

Audio Amplifier

Rated power output:

1-3/4" (44 mm) Width × 4-5/16" (110 mm)

Height × 1-1/16" (27 mm) Depth

17 W × 4 (20 Hz to 20 kHz, 1%, 4 Ω)

Maximum power output: 46 W × 4

Speaker impedance: 4 Ω (4 to 8 Ω)

Weight of the Remote Control Unit:

30 g (including battery)

Input

Video input:

1.0 +/- 0.2 Vp-p (input impedance 75 Ω)

Output

Audio output: min.200mVrms

LCD Monitor

Screen Size:

6.5-inch wide type (142 mm Width × 78 mm

Height)

Notes:

Display method: Transmission type TN liquid

crystal display

• Specifications comply with EIAJ Standards.

• Specifications and design are subject to change

without notice for further immprovement.

Drive method: TFT (thin-film transistor) active

matrix driving

Pixels:

280,800 (1200 × 234)

VRX6 3 0

Audiovox TRY32 User Manual
Canon EF 25 User Manual
Canon V 75 Hi User Manual
Casio Ea 200 Laboratory Data Collection Device EA 200 User Manual
Crown Boiler CWD165 User Manual
GN Netcom Jabra BT160 User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System LA22F User Manual
Infinity Systems Inc Car Speaker BU 2 User Manual
JL Audio J2500 1 User Manual
JVC Car Stereo System KD R640 User Manual