Clarion DXZ468RMP User Manual
Owner’s manual  
Mode d’emploi  
Bedienungsanleitung  
Istruzioni per l’uso  
Gebruiksaanwijzing  
Manual de instrucciones  
Bruksanvisning  
Manual de instruções  
CD/MP3/WMA RECEIVER/CeNET CONTROL  
RADIO CD/MP3/WMA/CONTRÔLE CeNET  
CD/MP3/WMA-RECEIVER/CeNET CONTROL  
RICEVITORE PER CD/MP3/WMA/CeNET CONTROL  
CD/MP3/WMA-RECEIVER/CeNET CONTROLE  
RADIO CD/MP3/WMA/CONTROL CeNET  
CD/MP3/WMA-LÄSARE/CeNET KONTROLL  
RECEPTOR CD/MP3/WMA/CONTROLO CeNET  
Thank you for purchasing this Clarion product.  
∗ Please read this ownerʼs manual in its entirety before operating this equipment.  
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.  
CAUTIONS:  
OBS!  
Apparaten innehåller laserkomponenten som  
avger laserstrålning överstigande gränsen  
för laserklass 1.  
This appliance contains a laser system and is  
classified as a “CLASS 1 LASER PRODUCT”.  
To use this model properly, read this Owner’s  
Manual carefully and keep this manual for  
your future reference. In case of any trouble  
with this player, please contact your nearest  
“AUTHORIZED service station”. To prevent  
direct exposure to the laser beam, do not try  
to open the enclosure.  
VAROITUS  
Suojakoteloa si saa avata. Laite sisältää la-  
serdiodin, joka lähettää näkymätöntä silmille  
vaarallista lasersäteilyä.  
!CAUTION  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED IN THE OWNER’S  
MANUAL MAY RESULT IN HAZARDOUS RA-  
DIATION EXPOSURE.  
ADVARSEL.  
Denne mærking er anbragt udvendigt på ap-  
paratet og indikerer, at apparatet arbejder med  
laserstråler af klasse 1, hvilket betyder, at der  
anvendes laserstråler af svageste klasse, og  
at man ikke på apparatets yderside kan blive  
udsat for utilladelig kraftig stråling.  
APPARATET BØR KUN ÅBNES AF FAGFOLK  
MED SÆRLIGT KENDSKAB TIL APPARATER  
MED LASERSTRÅLER!  
Indvendigt i apparatet er anbragt den her  
gengivne advarselsmækning, som advarer  
imod at foretage sådanne indgreb i appara-  
tet, at man kan komme til at udsaætte sig for  
laserstråling.  
DXZ468RMP  
2
Contents  
1. PRECAUTIONS .............................................................................................................................. 3  
Handling Compact Discs ................................................................................................................. 4  
2. CONTROLS .................................................................................................................................... 5  
3. NOMENCLATURE .......................................................................................................................... 6  
Names of the Buttons and their Functions....................................................................................... 6  
Major Button Operations when external equipment is connected to this unit .................................. 7  
Display Items ................................................................................................................................... 9  
LCD Screen ..................................................................................................................................... 9  
4. REMOTE CONTROL .................................................................................................................... 10  
Inserting the Battery....................................................................................................................... 10  
Functions of Remote Control Unit Buttons......................................................................................11  
5. DCP ............................................................................................................................................... 12  
6. OPERATIONS ............................................................................................................................... 13  
Basic Operations ........................................................................................................................... 13  
Radio Mode Operations ................................................................................................................. 15  
RDS Operations ............................................................................................................................ 17  
CD/MP3/WMA Mode Operations ................................................................................................... 21  
Operations Common to Each Mode............................................................................................... 26  
7. OPERATIONS OF ACCESSORIES .............................................................................................. 30  
CD Changer Operations ................................................................................................................ 30  
TV Operations ............................................................................................................................... 31  
Digital Radio/DAB Operations ....................................................................................................... 32  
8. TROUBLESHOOTING .................................................................................................................. 35  
9. ERROR DISPLAYS ...................................................................................................................... 37  
10. SPECIFICATIONS ........................................................................................................................ 38  
1. PRECAUTIONS  
1. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper playback  
may not be possible. If moisture forms on the  
disc, wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do  
not use the player for about one hour. The  
condensation will disappear naturally allowing  
normal operation.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
3. This unit is applicable for on-road 4 wheel ve-  
hicle purpose only. Use for tractor, fork truck,  
bulldozer, off road vehicle, 2 or 3 wheel motor  
bicycle, marine boat or other special purpose  
vehicle is not appropriate.  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-  
TURER WILL VOID THE WARRANTY.  
DXZ468RMP  
3
Handling Compact Discs  
This unit has been designed specifically for play-  
or  
Note on compact discs  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
back of compact discs bearing the  
mark. No other discs can be played.  
To remove the compact disc from its storage  
case, press down on the center of the case  
and lift the disc out, holding it carefully by the  
edges.  
Do not use any solvents such as commercially  
available cleaners, anti-static spray, or thinner  
to clean compact discs.  
Always handle the compact disc by the edges.  
Never touch the surface.  
To remove fingermarks and dust, use a soft  
cloth, and wipe in a straight line from the center  
of the compact disc to the circumference.  
Do not use compact discs that have large  
scratches, are misshapen, or cracked, etc.  
Use of such discs will cause misoperation or  
damage.  
New discs may have some roughness around  
the edges. The unit may not work or the sound  
may skip if such discs are used. Use a ball-point  
pen, etc. to remove roughness from the edge  
of the disc.  
Do not expose compact discs to direct sunlight  
or any heat source.  
Note:  
• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These  
may get caught in the internal mechanism and damage the disc.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.  
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.  
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.  
DXZ468RMP  
4
CONTROLS / LES COMMANDES / REGLER / CONTROLLI  
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS  
2.  
MAIN UNIT / APPAREIL PRINCIPAL / HAUPTGERÄT  
/ APPARECCHIO PRINCIPALE / HOOFDTOESTEL  
/ UNIDAD PRINCIPAL / HUVUDENHET / UNIDADE PRINCIPAL  
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE  
ÖFFNUNG DER KLAPPSCHALTTAFEL / Apertura del PANNELLO APRIBILE  
Met het NEERKLAPBARE PANEEL geopend / Apertura del PANEL ABATIBLE  
DEN NEDFÄLLBARA PANELEN öppen / Abrindo o PAINEL RECLINÁVEL  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapital die Frontdiagramme beachten.  
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.  
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.  
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.  
DXZ468RMP  
5
3. NOMENCLATURE  
Note:  
(
)
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 unfold .  
Names of the Buttons and their Functions  
[
]
[
]
OPEN button  
BND button  
[
]
• Deeply push in OPEN button to unlock the flip  
down panel.  
• Switch the band, or seek tuning or manual tuning  
while in the radio mode.  
• Play a first track while in the CD/MP3/WMA  
mode.  
Press and hold the button for 1 second or longer  
to perform multi-session.  
[
• Press the button to switch to the ADJ mode.  
When the button press and hold for 1 second or  
longer to enter RDS ADJ mode.  
]
ADJ button  
• Press the button to change the character.  
[
• Perform preset scan while in the radio mode.  
]
[
] [  
]
button  
UP , DN buttons  
(
)
• Select the Folder. MP3/WMA disc only  
Press and hold the button for 2 seconds or  
longer to perform auto store.  
[
]
RDM button  
• Play or pause a CD while in the CD/MP3/WMA  
mode.  
• Perform random play while in the CD/MP3/WMA  
mode.  
• Press and hold the button for 1 second or lon-  
ger to perform folder random play while in the  
MP3/WMA mode.  
[
• Receiver for remote control unit.  
]
SENSOR  
• Operating range: 30° in all directions.  
[
• Repeat play while in the CD/MP3/WMA mode.  
]
RPT button  
[
]
TA button  
• Press and hold the button for 1 second or longer  
to perform folder repeat play while in the MP3/  
WMA mode.  
(
• Press the button to set the TA TrafficAnnounce-  
)
ment standby mode.  
[ ]  
D button  
• Switch the display indication Main display, Title  
)
display .  
[
]
SCN button  
(
• Perform scan play for 10 seconds of each track  
while in the CD/MP3/WMA mode.  
• Press and hold the button for 1 second or longer  
to enter the display adjustment mode.  
• Press and hold the button for 1 second or longer  
to perform folder scan play while in the MP3/  
WMA mode.  
[ ]  
Z button  
[
]
• Press the button to select one of the 3 types  
of sound characteristics already stored in  
memory.  
DIRECT buttons  
• Store a station into memory or recall it directly  
while in the radio mode.  
[ ]  
T button  
[
• Press the button to turn on the power.  
]
SRC button  
• Press the button to input a title in the CD  
mode.  
• Press and hold the button for 1 second or longer  
to turn off the power.  
• Press the button to switch the user titles or track  
titles, while in the CD/MP3/WMA mode.  
• Switch the operation mode among the radio  
mode, etc.  
• Press the button to scroll the title during the CD-  
text play, while in the CD/MP3/WMA mode.  
[
]
ROTARY knob  
• Adjust the volume by turning the knob clockwise  
or counterclockwise.  
• Use the knob to perform various settings.  
DXZ468RMP  
6
Major button operations when  
external equipment is connected to  
this unit  
[
DIRECT button  
• Store a station into memory or recall it directly.  
]
[
ADJ button  
• Press the button to switch to the ADJ mode.  
]
• Press and hold the button for 1 second or  
longer to switch to the TV picture mode or VTR  
( )  
external picture mode.  
[
• Select a station.  
]
,
lever  
DXZ468RMP  
8
Display Items  
LCD Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
DXZ468RMP  
9
4. REMOTE CONTROL  
Inserting the Battery  
Notes:  
1. Turn over the remote control unit and slide the  
cover in the direction indicated by the arrow in  
the illustration.  
Misuse may result in rupture of the battery, producing  
leakage of fluid and resulting in personal injury or  
damage to surrounding materials.Always follow these  
safety precautions:  
• Use only the designated battery.  
• When replacing the battery, insert properly, with  
(
)
2. Insert the battery CR2025 into the insertion  
(+)  
guides, with the printed side  
upwards.  
facing  
3. Press the battery in the direction indicated by the  
arrow so that it slides into the compartment.  
+
/- polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or  
water. Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
4. Replace the cover and slide in until it clicks  
into place.  
DXZ468RMP  
10  
Functions of Remote Control Unit Buttons  
Mode  
CD Changer  
DVD Changer  
(
Radio RDS /DAB  
)
CD/MP3/WMA  
TV  
Button  
[
[
]
]
SRC  
Switch among radio, DAB, CD/MP3/WMA, AUX, CD changer, DVD changer and TV.  
Switch reception  
band.  
Play the first track.  
Top play.  
Move the next disc in Switch reception  
increasing order.  
BND  
band.  
(
)
Increase and decrease volume in all modes .  
[
]
]
[
[
]
,
,
[
]
Move preset  
channels up and  
down.  
Move tracks up and down.  
Press and hold the button for 1 second or  
longer: Fast-forward/fast-backward.  
Move preset  
channels up and  
down.  
[
]
No function.  
Switch between playback and pause.  
Turn mute on and off.  
No function.  
[
]
MUTE  
[
]
TA  
TA on and off.  
[
]
Switch among main display, title display.  
DISP  
[
]
Preset scan.  
Press and hold the  
button for 2 seconds button for 1 second  
or longer: Auto store. or longer to perform  
Scan play.  
Press and hold the  
Scan play.  
Preset scan.  
PS/AS  
Press and hold the  
button for 1 second  
or longer: Disc scan  
Press and hold the  
button for 2 seconds  
or longer: Auto store.  
folder scan play while play.  
in the MP3/WMA  
mode.  
[
]
AF  
AF function on and  
off.  
Repeat play.  
Repeat play.  
No function.  
Press and hold the  
button for 1 second  
or longer to perform  
folder repeat play  
while in the MP3/  
WMA mode.  
Press and hold the  
button for 1 second  
or longer: Disc repeat  
play.  
Press and hold the  
button for 1 second  
or longer: REG  
function on and off.  
[
]
PTY mode on and off. Random play.  
Press and hold the  
Random play.  
Switch between TV  
and VTR.  
PTY  
Press and hold the  
button for 1 second or  
longer: Disc random  
play.  
button for 1 second  
or longer to perform  
folder random play  
while in the MP3/  
WMA mode.  
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.  
DXZ468RMP  
11  
5. DCP  
The control panel can be detached to prevent  
CAUTION  
!
theft. When detaching the control panel, store it  
(
)
in the DCP Detachable Control Panel case to  
prevent scratches.  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
We recommend taking the DCP with you when  
leaving the car.  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
Removing the DCP  
]
2. Insert the left side of the DCP to attach into  
the main unit.  
[
1. Press the SRC button for 1 second or longer  
to switch off the power.  
[
]
2. Press in the OPEN button.  
∗ If the flip down panel does not open fully, gently  
open it with your hand.  
CAUTION  
!
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it or  
subject it to strong shocks.  
• If the FLIP DOWN PANEL is kept open, the  
DCP may drop due to vibration of the car.  
This result in damage to the DCP. So close  
the FLIP DOWN PANEL or remove the DCP  
to store into the case.  
• The connector connecting the main unit and  
the DCP is an extremely important part. Be  
careful not to damage it by pressing on it  
with fingernails, pens, screwdrivers, etc.  
3. Pull the DCP toward you and remove it.  
4. Close the HOLD FLAP.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DXZ468RMP  
12  
6. OPERATIONS  
Basic Operations  
! CAUTION  
Be sure to lower the volume before switching  
off the unit power or the ignition key. The  
unit remembers its last volume setting. If you  
switch the power off with the volume up, when  
you switch the power back on, the sudden loud  
volume may hurt your hearing and damage  
the unit.  
Note:Be sure to read this chapter referring to the front diagrams of  
(
chapter “2. CONTROLS” on page 5 unfold .  
)
Note:  
• If the CD mode is selected when no disc is inserted,  
the display shows “NO DISC”.  
Switching the display  
[ ]  
Press the D button to select the desired display.  
[ ]  
Each time you press the D button, the display  
switches in the following order:  
•
Main display  
Turning on/off the power  
Note:  
• Be careful about using this unit for a long time  
without running the engine. If you drain the carʼs  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
•
Title display  
[
1. Press the SRC button.  
]
2. The illumination and display on the unit  
light up. The unit automatically remem-  
bers its last operation mode and will au-  
tomatically switch to display that mode.  
∗ In the case of a user title, only the top level is  
displayed.  
[
]
3. Press and hold the SRC button for 1 second  
or longer to turn off the power for the unit.  
∗ In the case of radio/TV/AUX/DVD changer, the  
display cannot be switched to “Title Display”.  
Note:  
• The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power  
is turned on, “SYSTEM CHECK” appears in the  
display, then “TUNER” appears in the display and  
goes to radio mode.  
∗ Once selected, the preferred display becomes the  
display default. When a function adjustment such  
as volume is made, the screen will momentarily  
switch to that functionʼs display, then revert back  
to the preferred display several seconds after the  
adjustment.  
∗ When you have entered a title in a CD/MP3/WMA,  
it appears in the title display. If you have not en-  
tered a title, “NO TITLE” appears in the title display  
instead.  
Selecting a mode  
[
]
1. Press the SRC button to change the operation  
mode.  
[
]
2. Each time you press the SRC button, the op-  
eration mode changes in the following order:  
For information on how to enter a title, refer to the  
subsection “Entering titles” in section “Operations  
Common to Each Mode”.  
Radio mode DAB mode CD/MP3/WMA  
mode CD changer mode DVD chang-  
er mode TV mode AUX mode  
Radio mode...  
∗ When CT data is not received, “--:--CT” appears in  
the display.  
∗ External equipment not connected with CeNET  
is not displayed.  
∗ If AUX is set in AUX/TEL, AUX mode can be  
selected.  
DXZ468RMP  
13  
Basic Operations  
Adjusting the volume  
[
Adjusting the balance  
[
]
]
1. Press the front part of the ROTARY knob. The  
knob will pop up.  
1. Press the A-M button and select “BALANCE  
0”.  
[
]
[
]
2. Turning the ROTARY knob clockwise increas-  
es the volume; turning it counter-clockwise  
decreases the volume.  
2. Turning the ROTARY knob clockwise empha-  
sizes the sound from the right speaker; turning  
it counterclockwise emphasizes the sound from  
the left speaker.  
(
)
∗ The volume level is from 0 minimum to 33  
(
)
maximum .  
∗ The factory default setting is “0”.  
(
)
Adjustment range: L13 to R13  
3. When the adjustment is complete, press the  
]
Audio mode adjustments  
[
[
mode is reached.  
A-M button several times until the function  
]
1. Press the A-M button to select the adjustment  
mode. The mode switches as follows each time  
[
the A-M button is pressed:  
]
Adjusting the fader  
[
BASS TREBLE BALANCE FADER  
Previous mode  
]
1. Press the A-M button and select “FADER 0”.  
[
]
[
]
2. Turning the ROTARY knob clockwise empha-  
sizes the sound from the front speakers; turning  
it counterclockwise emphasizes the sound from  
the rear speakers.  
2. Turning the ROTARY knob to adjust the se-  
lected audio mode.  
(
)
BASS Bass  
:
-
+
+
Adjustment range : 6 to  
7
6
∗ The factory default setting is “0”.  
(
(
)
TREBLE Treble  
Adjustment range : 6 to  
:
)
Adjustment range: F12 to R12  
-
3. When the adjustment is complete, press the  
(
)
BALANCE Balance :  
Adjustment range : L13 to R13  
[
mode is reached.  
]
A-M button several times until the function  
(
)
FADER Fader  
Adjustment range : F12 to R12  
:
Setting the Z-Enhancer  
This unit are provided with 3 types of sound tone  
effects stored in memory. Select the one you  
prefer.  
∗ The display returns to the previous mode 7  
seconds after the adjustment.  
∗ The factory default setting is “Z-ENHANCER OFF”.  
Adjusting the bass  
[
1. Press the A-M button and select “BASS 0”.  
]
[ ]  
Each time you press the Z button, the tone effect  
changes in the following order:  
[
]
2. Turning the ROTARY knob clockwise em-  
phasizes the bass; turning it counterclockwise  
attenuates the bass.  
“OFF” “BASS BOOST” “IMPACT”  
“EXCITE” “OFF” ...  
• BASS BOOST : bass emphasized  
∗ The factory default setting is “0”.  
(
-
Adjustment range: 6 to  
+ )  
7
• IMPACT  
• EXCITE  
: bass and treble emphasized  
: bass and treble emphasized  
mid de-emphasized  
Adjusting the treble  
[
• OFF  
: no sound effect  
]
1. Press the A-M button and select “TREBLE  
0”.  
[
]
2. Turning the ROTARY knob clockwise em-  
phasizes the treble; turning it counterclock-  
wise attenuates the treble.  
∗ The factory default setting is “0”.  
)
(
Adjustment range: -6 to +6  
DXZ468RMP  
14  
Basic Operations  
Radio Mode Operations  
Listening to the radio  
[
Adjusting MAGNA BASS EX  
]
1. Press the SRC button and select the radio  
mode, then the radio will be on.  
The MAGNA BASS EX does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
[
]
2. To select a preset band, press the BND  
button, then select one of the preset bands  
such as FM1, FM2, FM3 or AM. Every time  
∗ The factory default setting is off.  
[
]
the BND button is pressed, the display will  
change as:  
[
]
1. Press and hold the A-M button for 1 second or  
longer to turn on the MAGNA BASS EX effect.  
“M-BASS EX ON” lights in the display.  
FM1 FM2 FM3 AM FM1...  
[
to tune in the desired station.  
]
[
]
3. Press the  
,
lever upward or downward  
2. Press and hold the A-M button for 1 second or  
longer to turn off the MAGNA BASS EX effect.  
“M-BASS EX OFF” lights in the display.  
Seek tuning  
There are 2 types of seek tuning: DX SEEK and  
LOCAL SEEK.  
(
)
CT Clock Time function  
The CT function receives CT data sent from an  
[ ]  
RDS station and displays the time. Press the D  
button to switch to the CT display.  
DX SEEK can automatically tune in to receivable  
broadcast stations; LOCAL SEEK can tune in to  
only broadcast stations with a good reception  
sensitivity.  
∗ If a CT data is not being received, “--:--CT” appears  
in the display.  
Note:  
[
]
1. Press the BND button and select the desired  
• CT data is not transmitted in some countries and  
by some broadcast stations. Also, in some areas,  
the CT may not display accurately.  
(
(
))  
band FM or AM MW, LW .  
2. Tune into a station.  
∗ If “MANU” is lit in the display, press and hold  
[
]
the BND button for 1 second or longer.  
“MANU” in the display goes off and seek tuning  
is now available.  
∗ If “TA” is lit in the display, TP stations are auto-  
matically sought.  
•
Press the  
DX SEEK  
[
to start automatic station tuning.  
]
,
lever upward or downward  
When the lever is pressed upward, search will be  
performing in the direction of higher frequencies.  
When the lever is pressed downward, search  
will be performed in the direction of lower  
frequencies.  
∗ When seek tuning starts, “DX SEEK” appears in  
the display.  
•
LOCAL SEEK  
If the lever is pressed upward or downward and  
held in position for 1 second or longer, local seek  
tuning will be enabled. Broadcast stations with  
good reception sensitivity are selected.  
∗ When local seeking starts, “LO SEEK” appears in  
the display.  
DXZ468RMP  
15  
Radio Mode Operations  
Manual tuning  
Auto store  
There are 2 ways available: Quick tuning and  
step tuning.  
Auto store is a function for storing up to 6 stations  
that are automatically tuned in sequentially.  
If 6 receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
[
]
1. Press the BND button and select the desired  
))  
(
(
band FM or AM MW/LW .  
[
]
1. Press the BND button and select the desired  
(
)
[
]
band FM or AM .  
2. Press and hold the PS/AS button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the preset  
channels.  
∗ If “MANU” is not lit in the display, press and hold  
[
]
the BND button for 1 second or longer.  
“MANU” is lit in the display and manual tuning  
is now available.  
∗ If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
2. Tune into a station.  
•
Quick tuning:  
[
]
Press the  
,
lever upward or downward  
Preset scan  
and hold in position for 1 second or longer to begin  
station tuning.  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for a desired station in memory.  
•
Step tuning:  
[
1. Press the PS/AS button.  
]
[
to perform manual tuning.  
]
Press the  
,
lever upward or downward  
2. When a desired station is tuned in, press the  
[
]
PS/AS button again to continue receiving that  
station.  
Note:  
∗ If no operation is performed for more than 7 sec-  
onds, manual tuning is cancelled and the display  
returns to the previous mode.  
[
]
• Be careful not to press and hold the PS/AS button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing sta-  
tions.  
Preset memory function  
Preset memory function can store up to 24  
stations:  
six stations for each of FM1, FM2, FM3 and AM.  
Recalling a preset station  
(
A total of 24 preset positions 6-FM1, 6-FM2,  
)
6-FM3, 6-AM exists to store individual radio  
stations in memory. Pressing the corresponding  
Manual memory function  
[
]
1. Press the BND button, to select a band you  
want to store in the memory.  
[
DIRECT button recalls the stored radio frequency  
automatically.  
]
[
]
2. Press the  
station.  
,
lever to tune into a desired  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
[
]
3. Press and hold one of the DIRECT button for  
2 seconds or longer to store the current station  
into preset memory.  
[
]
2. Press the corresponding DIRECT button to  
recall the stored station.  
[
]
∗ Press and hold one of the DIRECT buttons for  
2 seconds or longer to store that station into  
preset memory.  
DXZ468RMP  
16  
RDS Operations  
[
]
4. Press the ADJ button to return to the previous  
mode.  
(
)
RDS Radio Data System  
This unit has a built-in RDS decoder system that  
supports broadcast stations transmitting RDS  
data.  
∗ If the reception of the current broadcast sta-  
tion deteriorates, “PI SEARCH” appears in the  
display and the radio searches for the same  
programme on another frequency.  
This system can display the name of the  
(
)
broadcast station being received PS and can  
automatically switch to the broadcast station with  
the best reception as you move long distances  
•
AF function between RDS and DAB  
When the same programme is broadcasted by  
both RDS and DAB, and this function is ON, the  
unit switches to receive the broadcast with the  
better reception automatically.  
(
)
AF switching .  
Also, if a traffic announcement or programme  
type is broadcast from an RDS station, no matter  
what mode you are in, this broadcast is received.  
Additionally, if EON information is received,  
this information enables automatic switching of  
other preset stations on the same network and  
interruption of the station being received with traffic  
∗ This function only operates when the DAH923 or  
DAH913 DAB unit, sold separately, is connected.  
∗ This factory default setting is “ON”.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
(
)
information from other stations TP . This function  
is not available in some areas.  
[
to select “LINK ACT”.  
]
2. Press the  
,
lever upward or downward  
When using the RDS function, always set the  
radio to FM mode.  
[
]
3. Turn the ROTARY knob to select “ON” or  
“OFF”.  
• AF  
: Alternative Frequency  
: Programme Service Name  
: Programme Type  
• PS  
• PTY  
• ON:  
AF switching between DAB and RDS enabled.  
• EON : Enhanced Other Network  
• TP : Traffic Programme  
• OFF:  
AF switching between DAB and RDS disabled.  
∗ RDS interrupt does not function during AM radio  
reception.  
[
]
4. Press the ADJ button to return to the previous  
mode.  
∗ When set receives RDS signal, and can read PS  
data, PS appears in the display.  
(
)
REG Regional programme function  
When the REG function is ON, the optimum  
regional station can be received. When this func-  
tion is OFF, if the regional station area switches  
as you drive, a regional station for that region is  
received.  
AF function  
The AF function switches to a different frequency  
on the same network in order to maintain optimum  
reception.  
∗ The factory default setting is “ON”.  
∗ The factory default setting is “OFF”.  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
Mode.  
Notes:  
• This function is disabled when a national station  
such as BBC R2 is being received.  
[
2. Press the  
to select “AF”.  
]
,
lever upward or downward  
• The REG function ON/OFF setting is valid when  
the AF function is ON.  
[
]
3. Turn the ROTARY knob clockwise to select  
“ON” or counter-clockwise to select “OFF”.  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
selection display.  
• ON:  
“AF” in the display lights and AF function turns on.  
[
to select “REG”.  
]
2. Press the  
,
lever upward or downward  
• OFF:  
“AF” in the display goes off andAF function turns off.  
[
]
3. Turn the ROTARY knob to select “ON” or  
“OFF”.  
DXZ468RMP  
17  
RDS Operations  
• ON:  
“REG” in the display lights and REG function turns  
•
Cancelling the TA standby mode  
[
]
As “TP” and “TA” lit in the display, press the TA  
button. The “TA” in the display goes off and the  
on.  
TA standby mode is cancelled.  
• OFF:  
“REG” in the display goes off and REG function  
[
]
∗ If “TP” is not lit, pressing the TA button searches  
for a TP station.  
turns off.  
[
]
4. Press the ADJ button to return to the previous  
•
Searching for a TP station  
mode.  
[
]
When “TP” is not lit, if you press the TA button,  
“TA” in the display lights and the unit automatically  
receives a TP station.  
Manually tuning a regional station in  
the same network  
1. This function is valid when the AF function is  
ON and the REG function is OFF.  
Note:  
• If a TP station is not received, the unit continues  
[
]
the search operation. Pressing TA button again  
goes off “TA” in the display and stops TP station  
searching.  
Note:  
• This function can be used when a regional broad-  
cast of the same network is received.  
[
]
2. Press any one of the DIRECT buttons to call  
out the regional station.  
Auto store function for TP stations  
You can automatically store up to 6 TP stations  
into preset memory. If the number of TP can be  
received less than 6, broadcast stations already  
stored in memory and left without being overwrit-  
ten.  
3. If the reception condition of the called out sta-  
[
]
tion is bad, press the DIRECT button of the  
same number. The unit receives a local station  
on the same network.  
[
]
As “TA” lit in the display, press and hold the  
button for 2 seconds or longer. The TP stations  
with the good reception sensitivity are stored into  
preset memory.  
(
)
TA Traffic Announcement  
In the TAstandby mode, when a traffic announce-  
ment broadcast starts, the traffic announcement  
broadcast is received as top priority regardless  
of the function mode so you can listen to it.  
∗ Even if you select FM1 or FM2, a TP station is  
stored into memory for FM3.  
(
Traffic programme TP automatic tuning is also  
)
possible.  
RDS MODE adjustment  
[
∗ This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
]
Press and hold the ADJ button for 1 second or  
longer to select the RDS MODE.  
The mode switches as follows each time the  
[
]
,
lever are pressed upward or downward:  
•
Setting the TA standby mode  
PTY ON  
AF ON  
PTY SELECT Push ENT  
[
]
If you press the TA button when only “TP” is lit  
in the display, “TP” and “TA” light in the display  
and the unit is set into the TAstandby mode until a  
traffic announcement is broadcast. When a traffic  
announcement broadcast starts, “TRA INFO”  
∗
REG ON  
INFO Push ENT ....  
[
Press ADJ button to exit RDS MODE.  
]
∗ “REG ON” only available when “AF ON”.  
[
]
appears in the display. If you press the TA button  
while a traffic announcement broadcast is being  
received, the traffic announcement broadcast  
reception is cancelled and the unit goes into the  
TA standby mode.  
DXZ468RMP  
18  
RDS Operations  
PTY  
This function enables you to listen to a broadcast  
of the selected programme type even if the unit is  
on a function mode other than radio.  
PTY item  
Preset  
number  
ENGLISH Contents  
1
2
3
4
5
6
News  
Info  
News  
Information  
Pop Music  
Sport  
∗ Some countries do not yet have PTY broadcast.  
Pop M  
Sport  
∗ In the TA standby mode, a TP station has priority  
over a PTY broadcast station.  
Classics Serious Classical Music  
Easy M  
Easy Listening Music  
∗ The factory default setting is “OFF”.  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
selection display.  
∗ The PTY select mode is cancelled automatically 7  
seconds after a PTY is selected.  
[
]
2. Press the  
,
lever upward or downward  
to select “PTY”.  
PTY seek  
[
]
[
]
3. Turn the ROTARY knob to select “ON” or  
“OFF”.  
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
selection display.  
• ON:  
“PTY” in the display lights and PTY standby mode is  
turned on. When the selected PTY broadcast starts,  
the PTY item name appears in the display.  
[
to select “PTY SELECT  
]
2. Press the  
,
lever upward or downward  
Push ENT  
”.  
[
]
3. Press the  
4. Press the  
a PTY broadcast in the direction of higher  
button.  
• OFF:  
“PTY” in the display goes off and PTY standby mode  
is cancelled.  
[
]
lever upward to search for  
[
frequencies; press the  
search in the direction of lower frequencies.  
]
lever downward to  
[
]
4. Press the ADJ button to return to the previous  
mode.  
∗ If no station with the selected PTY broadcast  
can be received, the unit returns to the PTY  
select mode.  
•
Cancelling a PTY interrupt broadcast  
[
]
Press the TA button during the PTY interrupt  
broadcast, the PTY interrupt is cancelled and the  
unit returns to PTY standby mode.  
PTY preset memory  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
selection display.  
Selecting PTY  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
mode.  
[
]
2. Press the  
,
lever upward or downward  
to select “PTY SELECT Push ENT ”.  
[
]
3. Press the  
button.  
[
]
2. Press the  
,
lever upward or downward  
to select “PTY SELECT Push ENT ”.  
[
]
4. Turning the ROTARY knob to select the  
desired PTY.  
[
]
3. Press the  
button.  
The 29 types of PTY below can be selected.  
[
]
4. Press any one of the DIRECT buttons to call  
the Preset Memory for PTY selection..  
[
]
5. If you press and hold any one of the DIRECT  
buttons for 2 seconds or longer, the selected  
PTY is stored into that preset channel  
memory.  
[
]
Alternatively, turn the ROTARY knob to select  
the desired PTY.  
[
5. Press the ADJ button to return to the previous  
]
mode.  
∗ Below are the factory default settings stored for  
[
]
the DIRECT buttons.  
DXZ468RMP  
19  
RDS Operations  
Switching the PTY display language  
(
)
German, Swedish or French for the PTY  
displayed in the display.  
PTY item  
You can select one of 4 languages English,  
ENGLISH  
News  
Contents  
News  
Affairs  
Info  
Todayʼs events  
Information  
Sports  
∗ The factory default setting is “ENGLISH”.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
Sport  
Educate  
Drama  
Education  
Drama  
[
to select “LANGUAGE”.  
]
2. Press the  
,
lever upward or downward  
Culture  
Science  
Varied  
Culture  
[
]
3. Turn the ROTARY knob to select the desired  
language.  
Science  
Variety  
[
]
Pop M  
Pop music  
Rock music  
Easy music  
Light music  
Classics  
Other music  
Weather  
Finance  
4. Press the ADJ button to return to the previous  
mode.  
Rock M  
Easy M  
Light M  
Classics  
Other M  
Weather  
Finance  
Children  
Social  
Volume setting of TA, emergency  
(
)
broadcast ALARM and PTY  
The volume forTA,ALARM and PTYinterrupts can  
be set during TA, ALARM or PTY interrupt.  
∗ The factory default setting is “15”.  
For children  
Social  
During a TA, ALARM or PTY interrupt, turn the  
[
]
ROTARY knob to set the volume to the desired  
level 0 to 33 .  
(
)
Religion  
Phone In  
Travel  
Religion  
∗ When the TA, ALARM or PTY interrupt ends, the  
volume returns to the level it had before the inter-  
rupt.  
Phone in  
Travel  
Leisure  
Jazz  
Leisure  
Jazz  
Country  
Nation M  
Oldies  
Country  
Nation music  
Oldies  
Folk M  
Document  
Folk music  
Documentaries  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
“ALARM” appears in the display and the  
emergency broadcast can be heard.  
•
Cancelling an emergency broadcast  
[
]
If you press the TA button, emergency broadcast  
reception is cancelled.  
DXZ468RMP  
20  
CD/MP3/WMA Mode Operations  
(
Logical format File system  
)
•
What is MP3?  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format. This  
MP3 features the original audio data compression  
to about 12 percent of its initial size with a high  
quality sound. This means that about 10 music  
CDs can be recorded on a CD-R disc or CD-RW  
disc to allow a long listening time without having  
to change CDs.  
1. When writing MP3/WMAfile on a CD-R disc or  
CD-RW disc, please select “ISO9660 level 1, 2  
or JOLIET or Romeo” as the writing software  
format. Normal play may not be possible if the  
disc is recorded on another format.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA play  
but the title must be within 64 single byte  
(
alphabetical letters and numerals including  
)
an extension .  
3. Do not affix a name to a file inside a folder  
having the same name.  
What is WMA?  
WMA is the abbreviation of Windows Media  
Audio, an audio file format developed by Microsoft  
Corporation.  
•
Folder structure  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
Notes:  
(
• If you play a file with DRM Digital Rights Manage-  
)
ment for WMA remaining ON, no audio is output.  
•
Number of files or folders  
• Windows Media™, and the Windows® logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
1. Up to 255 files can be recognized per folder.  
Up to 512 files can be played.  
2. Tracks are played in the order that they were  
(
recorded onto a disc. Tracks might not always  
)
be played in the order displayed on the PC.  
•
To disable DRM  
(
)
Digital Rights Management :  
1. When using Windows Media Player 8, click on  
TOOLS OPTIONS COPY MUSIC tab,  
3. Some noise may occur depending on the type  
of encoder software used while recording.  
then under COPY SETTINGS unclick the  
check box for PROTECT CONTENT. Then,  
reconstruct files.  
CD-DA/MP3/WMA selection on  
multi-session CD  
When a disc contains both normal CD type tracks  
and MP3/WMA tracks mixedly, you can select  
which type of the recorded tracks to play.  
2. When using Windows Media Player 9, click on  
TOOL OPTIONS  
MUSIC RECORD tab,  
then under Recording settings, unclick the  
Check box for RECORD PROTECTED  
MUSIC. Then, reconstruct files. Personally  
constructed WMA files are used at your own  
responsibility.  
•
Default value is “CD”.  
[
]
Each time you press and hold the BND button for  
1 second or longer, the mixed mode is switched  
between CD type or MP3/WMAtype. The following  
indication appears in the title display when  
switching the track type to be played.  
•
Precautions when creating MP3/WMA  
disc  
•
Usable sampling rates and bit rates:  
Display when  
CD type track  
is selected:  
1. MP3: Sampling rate 11.025 kHz-48 kHz,  
Bit rate: 8 kbps-320 kbps / VBR  
2. WMA: Bit rate 48 kbps-192 kbps  
Display when  
MP3/WMA  
type track is  
selected:  
•
File extensions  
•
Always add a file extension “.MP3” or “.WMA”  
to MP3 or WMAfile by using single byte letters.  
If you add a file extension other than specified  
or forget to add the file extension, the file  
cannot be played  
.
DXZ468RMP  
21  
CD/MP3/WMA Mode Operations  
Note:  
• If the FLIP DOWN PANEL will not open far enough,  
open it gently with your hand.  
1. Types of recording that can be played are as  
follows.  
Setting  
Set to CD Set to MP3/WMA  
Disc  
[
]
2. Press the  
is ejected.  
button. Remove the disc after it  
Mixed with CD  
and MP3/WMA  
type tracks  
Play CD  
Play MP3/WMA  
3. Close the FLIP DOWN PANEL.  
Notes:  
• Always close the FLIP DOWN PANEL once you  
take out the disc.  
CD type track only  
Play CD  
Play CD  
MP3/WMA type  
track only  
Play MP3/ Play MP3/WMA  
WMA  
• If you force a CD into before auto reloading, this  
can damage the CD.  
2. After making these settings, remove the disc  
and then reinsert it.  
(
)
• If a CD 12 cm is left in the ejected position for 15  
(
seconds, the CD is automatically reloaded. Auto  
)
reload .  
3. When a mixed mode CD is loaded and CD is  
set, the track to be played first is MP3/WMA  
file data and no sound is heard.  
Note:  
Listening to a disc already loaded  
in the unit  
• When playing a CCCD (Copy Control CD), set the  
setting to CD type. When this is set to MP3/WMA  
type, the CD cannot be played normally in some  
cases.  
[
]
Press the SRC button to select the CD/MP3/  
WMA mode.  
When the unit enters the CD/MP3/WMA mode,  
play starts automatically.  
! CAUTION  
If there is no disc loaded, the indication “NO DISC”  
appears in the title display.  
• Do not try to put your hand or fingers in the  
disc insertion slot. Also never insert foreign  
objects into the slot.  
[
]
∗ The mode changes each time the SRC button is  
(
pressed. Modes are not displayed for equipment  
• Do not insert discs where adhesive comes  
out from cellophane tape or a rental CD label,  
or discs with marks where cellophane tape  
or rental CD labels were removed. It may be  
impossible to extract these discs from the  
unit and they may cause the unit to break  
down.  
)
that is not connected.  
(
CD changer  
Radio...  
)
Radio  
DAB  
CD/MP3/WMA  
)
(
)
(
(
TV  
)
DVD changer  
AUX  
Loading a CD  
[
]
1. Press the OPEN button to access the CD  
SLOT behind the FLIP DOWN PANEL.  
Backup eject function  
[
if the power to the unit was not turned on.  
]
Just pressing the  
button ejects the disc even  
2. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. The CD plays  
automatically after loading.  
[
]
1. Press the OPEN button to open the FLIP  
DOWN PANEL.  
Notes:  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be an-  
other CD in the mechanism or the unit may require  
service.  
• Discs not bearing the  
CD-ROMs cannot be played by this unit.  
or  
mark and  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
3. Close the FLIP DOWN PANEL.  
DXZ468RMP  
22  
CD/MP3/WMA Mode Operations  
Notes:  
• If the CD playing is not a CD-text data or no user  
! CAUTION  
U
title has been input, “ NO TITLE” appears in the  
display.  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
• If MP3/WMA disc is not input TAG, “ NO TAG”  
appears in the display.  
Notes:  
• If the FLIP DOWN PANEL does not open fully,  
gently open with your hand.  
• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.  
• Tag displays give priority to V2.3/2.2  
• After loading a CD, always close the FLIP DOWN  
PANEL.  
• In the case of album Tags for WMA, the information  
written into the extension header is displayed.  
• Only ASCII characters can be displayed in Tags.  
Pausing play  
[
appears in the display.  
]
1. Press the  
button to pause play. “PAUSE”  
Title display mode  
1. There are 5 types of display for the Title Display  
mode.  
[
]
2. To resume CD play, press the  
button again.  
[ ]  
2. To select the next type, press the T button for  
less than 1 second.  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA disc and user titles input with this unit.  
The arrangement is shown below.  
After 2 seconds  
[ ]  
1. Press the D button to display the title.  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
•
CD-TEXT data  
3. The displayed item can be scrolled by pressing  
[ ]  
the T button for more than 1 second.  
4. If a MP3/WMA file does not support for ID3  
TAG, the display will show “NO TAG”.  
•
MP3/WMA disc  
5. If a MP3/WMAfile encode with ID3 TAG header  
but no consist of any TAG information, the  
display will show nothing.  
Notes:  
• The folder name will be displayed as “ROOT” which  
the file allocates in the root folder.  
• The MP3 player decodes each file ID3 TAG ver 2  
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG  
ver 1 will be decoded.  
(
)
• UNICODE ID3 Chinese, Japanese and etc is not  
supported.  
DXZ468RMP  
23  
CD/MP3/WMA Mode Operations  
Selecting a track  
Example of a mediumʼs folder/file hierarchy  
• Track-up  
1. Press the  
[
beginning of the next track.  
]
lever upward to move to the  
[
]
2. Each time the  
lever is pressed upward,  
playback proceeds to another track in the  
advancing direction.  
• Track-down  
1. Press the  
[
beginning of the current track.  
]
lever downward to move the  
[
to the beginning of the previous track.  
]
2. Press the  
lever downward twice to move  
Fast-forward/fast-backward  
Fast-forward  
•
Press the  
1 second or longer.  
[
]
lever upward and hold in position for  
• Fast-backward  
Press the [ ] leverdownwardandholdinposition  
for 1 second or longer.  
∗ For MP3/WMA discs, it takes some time until the  
start of searching and between tracks. In addition,  
the playing time may have a margin of error.  
Folder select  
This function allows you to select a folder  
containing MP3/WMA files and start playing from  
the first track in the folder.  
MP3/WMA playing order  
When selected for play folder up down functions,  
files and folders are accessed in the order in which  
they were written by the CD-ROM writer. Because  
of this, the order in which they are expected to  
be played may not match the order in which they  
are actually played. You may be able to set the  
order in which MP3/WMA are to be played by  
writing them onto a medium such as a CD-R with  
their file names beginning with play sequence  
numbers such as “01” to “99”, depending on your  
CD writer.  
[
1. Press the DN or the UP button.  
]
[
]
[
]
Press the DN button to move the previous  
[
]
folder. Press the UP button to move the next  
folder.  
For example, a medium with the following folder/  
file hierarchy is shown below.  
DXZ468RMP  
24  
CD/MP3/WMA Mode Operations  
[
]
∗ Press the UP button while in the final folder  
to shift to the first folder.  
•
Random play  
This function allows you to play all tracks recorded  
on a disc in a random order.  
∗ Folder without an MP3/WMAfile is not selectable.  
[
]
2. To select a track, press the [  
upward or downward.  
,
] lever  
1. Press the RDM button to perform random  
play.  
“
RDM” appears in the display.  
Top function  
The top function resets the CD player to the first  
•
Folder random play  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA disc in  
a random order.  
[
]
track of the disc. Press the BND button to play  
(
)
the first track track No. 1 on the disc.  
∗ In case of MP3/WMA, the first track of a folder being  
played will be returned.  
[
]
1. Press and hold the RDM button for 1 second  
or longer to perform folder random play.  
“
RDM” appears in the display.  
Other various play functions  
Scan play  
•
•
To cancel play  
This function allows you to locate and play the first  
10 seconds of all the tracks recorded on a disc.  
1. Press the operating button previously  
selected.  
[
]
1. Press the SCN button to perform scan play.  
“
SCN” appears in the display.  
∗ Scan play starts from the next track after the  
track currently being played.  
•
Folder scan play  
This function allows you to locate and play the first  
10 seconds of the first track of all the folders on  
an MP3/WMA disc.  
[
]
1. Press and hold the SCN button for 1 second  
or longer to perform folder scan play.  
“
SCN” appears in the display.  
∗ Folder scan play starts from the next track  
after the track currently being played.  
•
Repeat play  
This function allows you to play the current track  
repeatedly.  
[
]
1. Press the RPT button to perform repeat play.  
“
RPT” appears in the display.  
•
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA folder repeatedly.  
[
]
1. Press and hold the RPT button for 1 second  
or longer to perform folder repeat play.  
“
RPT” appears in the display.  
DXZ468RMP  
25  
Operations Common to Each Mode  
[
]
3-4. Press the BND button to select a character.  
To change display setting  
[ ]  
[
Each time you press the BND button, the  
character changes in the following orders:  
]
1. Press and hold the D button for 1 second or  
longer to switch to the adjustment selection  
display.  
Capital letters Small letters Numbers/  
Capital letters...  
Symbols Umlaut  
2. Press the [  
to select the “item name”.  
,
] lever upward or downward  
[
]
3-5. Turn the ROTARY knob to select the desired  
character.  
“SCREEN SVR Push ENT  
”
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
Push ENT  
“MSG INPUT  
“AUTO SCROLL”  
”
“SCRL SPEED”  
“DIMMER”  
“CONTRAST”  
[
]
3-7. Press and hold the  
button for 2 seconds  
or longer to store the message in memory  
and cancel input message mode.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting value”.  
[
]
∗ Press and hold the BND button for 1 second  
or longer to cancel the input message. Then  
[ ]  
∗ After completing settings, press the D button  
to return to the previous mode.  
[
]
press and hold the  
button for 2 seconds  
or longer to store the message and the mes-  
sage return to default setting.  
•
Turning the screen saver function on or  
off  
This unit is provided with the screen saver function  
which allows you to show various kinds of patterns  
and characters in the operation status indication  
area of the display in a random order. You can turn  
on and off this function.  
• Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA title.  
∗ The factory default setting is “ON”.  
2-1. Select “ AUTO SCROLL”.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
“OFF”.  
• ON:  
To scroll automatically.  
• OFF:  
∗ The factory default setting is “Pattern SS”.  
To scroll just 1 time when the title was changed or the  
[ ]  
T button was pressed for 1 second or longer.  
2-1. Select “ SCREEN SVR Push ENT ”.  
[
]
3-1. Turn the ROTARY knob to select the setting.  
•
Adjusting the display scroll speed  
[
]
Each time you turn the ROTARY knob,  
the setting changes in the following order:  
This feature allows you to slow down the scroll  
speed when the scroll speed is too fast, making it  
difficult to view the screen.  
“Pattern OFF” “Pattern SS” “Pattern  
MESSAGE”  
∗ The factory default setting is “SCRL SPEED 3”  
•
Entering MESSAGE INFORMATION  
2-1. Select “ SCRL SPEED”.  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
[
]
3-1. Turn the ROTARY knob to select the  
setting.  
∗ This setting item can be adjusted within the  
range SPEED 1 to SPEED 6.  
∗ The factory default setting is “WELCOME TO  
CLARION”.  
Adjust this setting item while viewing how  
the appearance of the display changes.  
Push ENT  
2-1. Select “ MSG INPUT  
”.  
[
]
3-1. Press the  
button.  
[
]
3-2. Press and hold BND button for 1 second or  
longer to clear the old message.  
[
ward to move the cursor.  
]
3-3. Press the  
,
lever upward or down-  
DXZ468RMP  
26  
Operations Common to Each Mode  
• Setting the external amplifier  
∗ The factory default setting is “OFF”.  
• Dimmer control  
You can setting the dimmer control “ON” or “OFF”.  
2-1. Select “ AMP CANCEL”.  
∗ The factory default setting is “ON”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
“OFF”.  
2-1. Select “ DIMMER”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
“OFF”.  
• ON:  
Use with connected AMP.  
• OFF:  
•
Adjusting the display contrast  
Use with inside AMP.  
You can adjust the display contrast to match the  
angle of installation of the unit.  
•
Selecting AUX/TEL  
∗ The factory default setting is “08”.  
(
You can listen to sounds and music from external  
devices or your telephone calls from the speak-  
ers when connected to this unit.  
)
Adjustment level: 01 to 16  
2-1. Select “ CONTRAST”.  
[
]
3-1. Turn the ROTARY knob to adjust the  
contrast.  
When TEL INT or External device is connected  
to this unit, you can select TEL mode or AUX  
mode.  
∗ The factory default setting is “AUX”.  
To change other settings  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
2-1. Select “ AUX/TEL”.  
[
]
3-1. Turn the ROTARY knob to select “AUX” or  
“TEL”.  
[
to select the “item name”.  
,
]
2. Press the  
lever upward or downward  
• AUX :  
[
,
]
Each time the  
lever is pressed up/  
AUX/TEL input cable is for external Audio input.  
down, the item display changes in the following  
order:  
• TEL :  
AUX/TEL input cable is for cellular phone audio  
input.  
“BLINK LED”  
“AMP CANCEL”  
“LANGUAGE”  
(
)
“LINK ACT”  
“AUX/  
“TEL-SPEAKER”  
TEL” “AUX SENS”  
“TEL-SWITCH”  
•
Selecting AUX IN sensitivity  
“SYSTEM CHECK Push ENT  
”
Make the following settings to select the sensi-  
tivity when sounds from external devices con-  
nected to this unit are difficult to hear even after  
adjusting the volume.  
∗ Item in brackets only available if it's connected.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting item”.  
∗ The factory default setting is “MID”.  
[
∗ After completing settings, press the ADJ but-  
]
2-1. Select “ AUX SENS”.  
ton to return to the previous mode.  
[
]
3-1. Turn the ROTARY knob to select “LOW”,  
“MID” or “HIGH”.  
•
Anti-theft indicator  
The red Anti-theft indicator is a function for pre-  
venting theft. When the DCP is removed from the  
unit, this indicator blinks.  
∗ The factory default setting is “OFF”.  
2-1. Select “ BLINK LED”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
“OFF”.  
DXZ468RMP  
27  
Operations Common to Each Mode  
•
Setting the car speaker output for the  
(
•
Triggered audio mute for cellular  
telephones  
)
cellular phone Optional BLT-433  
∗ The factory default setting is “RIGHT”.  
This unit requires special wiring to mute the audio  
signal automatically when a cellular telephone  
rings in the car.  
∗ To output the telephone calls, set the cellular phone  
interrupt to ON.  
∗ This function is not compatible with all cellular  
telephones. Contact your local authorized Clarion  
dealer for information on proper installation and  
compatibility.  
2-1. Select “ TEL-SPEAKER”.  
[
]
3-1. Turn the ROTARY knob to select “RIGHT”  
or “LEFT”.  
• RIGHT:  
Telephone calls can be heard on the front right  
speaker connected to this unit.  
•
Performing a system check  
This function allows you to perform a system check  
from the adjust mode when required.  
• LEFT:  
Telephone calls can be heard on the front left speaker  
connected to this unit.  
2-1. Select “ SYSTEM CHECK Push ENT ”.  
[
]
3-1. Press and hold the  
or longer.  
button for 1 second  
•
Cellular phone interrupt setting  
“SYSTEM CHECK” appears in the display,  
then the unit returns to the previous  
operation mode.  
If you connect this unit and your cellular phone with  
a separately sold unit BLT-433 , you can listen to  
your telephone calls on your car speakers.  
(
)
∗ The factory default setting is “OFF”.  
AUX function  
2-1. Select “ TEL-SWITCH”.  
This system has an external input jack so you  
can listen to sounds and music from external de-  
vices connected to this unit.  
[
]
3-1. Turn the ROTARY knob to select the  
[
]
setting. Each time you turn the ROTARY  
knob, the setting changes in the following  
order:  
Entering titles  
OFF ON MUTE OFF...  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer andTV  
stations. The number of titles that can be entered  
for each mode are as follows.  
• OFF:  
This unit continues normal operation even when the  
cellular phone is used.  
Note:  
Mode  
Number of titles  
50 titles  
• If connecting a hands-free kit, please ensure the  
setting is ON to receive the telephone audio through  
the system.  
CD mode  
TV mode  
20 titles  
• ON:  
You can listen to your telephone calls from the  
speakers connected to this unit.  
CD changer mode  
DCZ628 connected  
CDC655Tz connected  
Number of titles  
100 titles  
100 titles  
∗ When listening to your calls on your car speak-  
ers, you can adjust the volume by turning the  
[
]
1. Press the SRC button to select the mode you  
[
]
(
)
ROTARY knob.  
want to enter a title CD, CD changer or TV .  
• MUTE:  
The sound from this unit is muted during telephone  
calls.  
2. Select and play a CD in the CD changer or tune  
in to a TV station for which you want to enter  
the title.  
[
]
3. Press the  
display.  
D
button and display the title  
DXZ468RMP  
28  
Operations Common to Each Mode  
[ ]  
4. Press and hold the T button for 1 second or  
longer.  
The display switches to the title input display.  
[
to move the cursor.  
,
]
5. Press the  
lever upward or downward  
[
]
6. Press the BND button to select a character.  
[
]
Each time you press the BND button, the  
character changes in the following order:  
Capital letters  
Symbols Umlaut  
Small letters  
Numbers/  
Capital letters...  
[
]
7. Turn the ROTARY knob to select the desired  
character.  
8. Repeat steps 5 to 7 to enter up to 10 characters  
for the title.  
[
]
9. Press and hold the  
button for 2 seconds  
or longer to store the title into memory and  
cancel title input mode.  
Clearing titles  
1. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
clear the title.  
[
]
2. Press the  
display.  
D
button and display the title  
[ ]  
3. Press and hold the T button for 1 second or  
longer.  
The display switches to the title input display.  
[
]
4. Press and hold the BND button for 1 second  
or longer.  
All characters in the title disappear.  
[
]
5. Press and hold the  
button for 2 seconds  
or longer to clear the title and cancel title input  
mode.  
DXZ468RMP  
29  
7. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
Note:  
• The following operations are the same as for CD  
mode:  
∗ Pause  
∗ Track selection  
∗ Fast-forward/fast-backward  
∗ Scan play  
∗ Repeat play  
Notes:  
• If the CD playing is not a CD-text CD or no user  
∗ Random play  
(
U
title has been input, “ NO TITLE” appears in the  
display.  
See “CD/MP3/WMA Mode Operations” page 21-  
)
25 for details.  
• If a CD-text CD is not input its disc title or a track  
O
title, “ NO TITLE” or “ NO TITLE” appears in  
the display.  
CD changer functions  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all CD  
changer functions. This unit can control a total of  
2 changers.  
Procedure to scroll a title  
Set “AUTO SCROLL” to “ON” or “OFF”.  
[
]
Press the SRC button and select the CD changer  
(
subsection “Turning the screen saver function  
The factory default setting is “ON”. Refer to the  
mode to start play. If 2 CD changers are con-  
[
]
nected, press the SRC button to select the CD  
changer for play.  
on or off” in section “Operation common to  
)
each mode”.  
∗ If “NO MAGAZINE” appears in the display, insert  
the magazine into the CD changer. “DISC CHECK”  
appears in the display while the player loads  
• When set to “ON”  
The title is automatically kept scrolling.  
(
)
checks the magazine.  
• When set to “OFF”  
To scroll just 1 time when the title was changed or the  
∗ If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
[ ]  
T button was pressed for 1 second or longer.  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
Selecting a CD  
[
]
[
]
Press the UP or DN button to select the desired  
disc.  
∗ If a CD is not loaded in a slot of magazine, press-  
! CAUTION  
[
ing the UP or DN button can not work.  
]
[
]
CD-ROM discs cannot be played from every CD  
changer, itʼs depended on the model.  
Displaying CD titles  
This unit can display title data for CD-text CDs and  
user titles input with this unit.  
∗ Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
[ ]  
1. Press the D button to display the title.  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
DXZ468RMP  
30  
CD Changer Operations  
TV Operations  
Note:  
• The following operations are performed the same  
as for radio mode:  
Other various play functions  
•
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
∗ Channel selection  
∗ Storing channels in memory  
∗ Calling channels from memory  
∗ Auto store  
∗ Disc scan play is useful when you want to select a  
desired CD.  
∗ Preset scan  
[
]
1. Press and hold the SCN button for 1 second  
or longer. “D.SCN” appears in the display and  
disc scan play starts.  
(
)
See “Radio Mode Operations” page 15-16 for  
details.  
TV tuner functions  
•
Disc repeat play  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays the  
current disc over from the first track.  
This function continues automatically until it is  
cancelled.  
Watching a TV  
[
[
]
1. Press and hold the RPT button for 1 second  
or longer. “D.RPT” appears in the display and  
disc repeat play starts.  
]
1. Press the SRC button and select the TV  
mode.  
[
]
2. Press the BND button to select the desired  
•
Disc random play  
(
)
TV band TV1 or TV2 . Each time the button is  
pressed, the input selection toggles between  
TV1 and TV2.  
The disc random play selects and plays individual  
tracks or discs automatically in no particular  
order.  
[
3. Press the  
to tune in the desired TV station.  
,
]
lever upward or downward  
This function continues automatically until it is  
cancelled.  
[
]
1. Press and hold the RDM button for 1 second  
or longer. “D.RDM” appears in the display and  
disc random play starts.  
Watching a video  
The TV tuner has a VTR input terminal to which 1  
external device can be connected. Connect a 12  
(
)
V video cassette player VCP or videocassette  
•
To cancel play  
(
)
recorder VCR to the TV tuner input terminal.  
1. Press the operating button previously  
selected.  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to select VTR.  
2. To return to the TV broadcast, press and hold  
[
]
the ADJ button for 1 second or longer.  
Setting the TV area  
(
)
When you select the TV area TV reception area ,  
the TV tuner area setting changes.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
[
to select “ TV AREA  
]
2. Press the  
,
lever upward or downward  
Push ENT  
”.  
[
]
3. Press the  
button.  
DXZ468RMP  
31  
Digital Radio/DAB  
Operations  
TV Operations  
[
]
4. Turn the ROTARY knob to select the reception  
area.  
DAB control function  
When a CeNET cable is used to connect a DAB  
(
functions can be operated.  
) (  
)
DAH913 or DAH923 sold separately , all  
[
]
5. Press the  
button.  
[
]
6. Press the ADJ button to return to the previous  
mode.  
Listening to the DAB station  
]
[
1. Press the SRC button to select the DAB  
mode.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
2. When the unit receives a DAB station, the  
display changes in the following order:  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
Frequency channel Service label  
2. Press the [  
to select “ TV DIVER”.  
,
] lever upward or downward  
Switching displays  
[ ]  
[
]
3. Turn the ROTARY knob clockwise to set to  
“ON” or counterclockwise to set to “OFF”.  
1. Press the D button to select the desired  
display.  
• ON:  
Sets the diver setting to ON.  
[ ]  
2. Each time you press the D button, the display  
switches in the following order:  
• OFF:  
Sets the diver setting to OFF.  
S-LABL PTY NAME S-LABL ...  
Notes:  
[
]
4. Press the ADJ button to return to the previous  
mode.  
• The display shown in the normal reception mode  
and the preset reception mode is the same when  
a DAB station is received.  
• The number of programmes and broadcasting times  
depend on the DAB stations.  
• When the strength of DAB signals is weak, audio  
output is muted.  
Seek tuning  
[
]
1. Press the SRC button to select the DAB  
mode.  
2. Press the [  
,
] lever upward or downward  
and hold in position for 1 second or longer.  
“DAB” lights up in the display when the main  
unit receives a DAB station.  
∗ The main unit stops the seek tuning when it  
cannot find a DAB station. The display returns  
to the previous mode.  
Manual tuning  
[
]
1. Press the SRC button to select the DAB  
mode.  
[
]
2. Press and hold the BND button for 1 second  
or longer. “MANU” lights up in the display.  
[
to select a station.  
,
]
3. Press the  
lever upward or downward  
DXZ468RMP  
32  
Digital Radio/DAB Operations  
∗ If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
Note:  
(
)
• The interrupt programme PTY or INFO cannot be  
written into a manual memory.  
Switching programmes  
[
Recalling a preset programme  
[
]
]
1. Press the SRC button to receive a DAB  
station.  
1. Press the SRC button to select the DAB  
mode.  
[
,
]
[
]
2. Press the  
to switch programmes in the DAB station.  
Note:  
lever upward or downward  
2. Press the BND button. Each time you press  
[
]
the BND button, the display changes in the  
following order:  
• The programme name may be the same depend-  
ing on DAB programmes.  
[
]
[
]
[
]
[
]
M1 ...  
M1  
M2  
M3  
[
]
3. Press one of the DIRECT buttons to recall a  
preset programme.  
Programme scan  
Note:  
[
]
• Press and hold the DIRECT button for 2 seconds  
or longer to store the programme currently being  
(
received. Manual memory  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially. This is useful when you  
want to search for a desired programme.  
)
[
]
1. Press the SRC button to receive a DAB  
station.  
(
)
INFO Announcement  
In the INFO standby mode, when the selected  
announcement programme starts, the main unit  
switches to the selected announcement pro-  
gramme automatically.  
2. Perform the following operation depending on  
the connected model.  
[
]
Press the  
button. “SERVICE SCAN” lights  
up and the unit starts scanning each pro-  
gramme for 10 seconds sequentially.  
•
Setting the INFO standby mode  
[
]
If you press and hold the TA button for 1 second  
or longer, the main unit is set into the INFO  
standby mode until the selected announcement  
is broadcast. When the selected announcement  
broadcast starts, the announcement item appears  
Each time the main unit scans, the programme  
name is shown in the display.  
3. To stop programme scan when a desired  
programme is tuned in.  
[
]
in the display. If you press and hold the TA  
[
]
Press the  
button.  
button for 1 second or longer while the selected  
announcement broadcast is being received, the  
selected announcement broadcast reception is  
cancelled and the main unit goes into the INFO  
standby mode.  
Manual memory  
The main unit has a manual memory function  
(
for DAB programmes. Up to 18 programmes 6  
)
programmes each can be preset in the preset  
buttons.  
• Cancelling INFO standby mode  
To cancel the INFO standby mode, press and hold  
[
] [ [ ]  
M1 , M2 and M3  
]
[
]
the TA button for 1 second or longer.  
[
]
1. Press the SRC button to select the DAB  
mode.  
•
Information select  
[
]
2. Press and hold the BND button for 1 second  
or longer to select any one shown above.  
This is a function for selecting INFORMATION ON  
or OFF in the Information interrupt mode.  
[
to select a desired programme.  
]
3. Press the  
,
lever upward or downward  
You can set ON up to 6 information items.  
[
]
4. Press and hold one of the DIRECT buttons  
(
)
1 to 6 for 2 seconds or longer to store the  
programme.  
DXZ468RMP  
33  
Digital Radio/DAB Operations  
You can select any of the 6 items below:  
INFORMATION item  
ENGLISH  
Travel  
Contents  
Transport flash  
Warning / Service  
News flash  
Warning  
News  
Weather  
Event  
Area weather flash  
Event announcement  
Special event  
Special  
1. Perform the following operation depending on  
the connected model.  
[
]
Press and hold the ADJ button for 1 second  
or longer to switch to the RDS adjustment  
selection display.  
[
,
]
2. Press the  
lever upward or downward  
Push ENT  
”, then press the  
to select “ INFO-S  
button to enter “ INFO-S Push ENT  
”
[
mode.  
]
[
,
]
3. Press the  
lever upward or downward  
to select an information item. You can select  
any of 6 items:  
Travel  
Warning  
News  
Event Special Travel ...  
Weather  
[
]
4. Turn the ROTARY knob to set the information  
item for ON or OFF.  
[
]
5. Press the  
button to store the setting.  
[
]
6. Press the ADJ button to return to the previous  
display.  
For the following items, see “RDS Operations”  
(
)
page 17  
•
AF function  
∗ If the reception of the current broadcast station  
deteriorates, “SEARCHING” appears in the display  
and the radio searches for the same programme  
on another frequency.  
(
)
•
•
•
•
TA Traffic Announcement  
PTY  
Emergency broadcast  
Switching the PTY and INFO display lan-  
guage  
•
Volume setting of TA, INFO emergency  
(
)
broadcast ALARM and PTY  
DXZ468RMP  
34  
8. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not turn on. Fuse is blown.  
(
Replace with a fuse of the same amperage.  
If the fuse blows again, consult your store of  
purchase.  
)
No sound is produced  
Incorrect wiring.  
Consult your store of purchase.  
No sound output when  
operating the unit with  
amplifiers or power  
antenna attached.  
Power antenna lead is  
shorted to ground or  
excessive current is  
required for remote-on  
the amplifiers or power  
antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power  
antenna lead. Check each wire for a possible  
short to ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to  
the power antenna lead one by one. If  
the amplifiers turn off before all wires are  
attached, use an external relay to provide  
(
remote-on voltage excessive current  
)
required .  
[
]
Nothing happens when  
button are pressed.  
Display is not accurate.  
The microprocessor has  
malfunctioned due to  
noise, etc.  
Turn off the power, then press the OPEN  
button and remove the DCP.  
Press the reset button for about 2 seconds  
with a thin rod.  
DCP or main unit  
connectors are dirty.  
Wipe the dirt off with a soft cloth moistened  
with cleaning alcohol.  
No sound heard.  
The speaker protection  
circuit is operating.  
1. Turn down sound volume. Function can  
also be restored by turning the power off  
and on again. (Speaker volume is reduced  
automatically when the speaker protection  
circuit operates).  
2. If the sound is muted again, consult our  
service department.  
DXZ468RMP  
35  
Troubleshooting  
Problem  
Cause  
Measure  
No sound heard.  
MP3/WMA files are  
absent in a disc.  
Write MP3/WMA files onto the disc properly.  
Files are not recognized  
as an MP3/WMA file.  
Use MP3/WMA files encoded properly.  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
Sound skips or is noisy.  
Disc is dirty.  
Clean the disc with a soft cloth.  
Disc is heavily scratched  
or warped.  
Replace with a disc with no scratches.  
Sound is cut or skipped. MP3/WMA files are not  
Use MP3/WMA files encoded properly.  
Noise is generated or  
noise is mixed with  
sound.  
encoded properly.  
Sound is bad directly  
Water droplets may  
Let dry for about 1 hour with the power on.  
after power is turned on. form on the internal lens  
when the car is parked  
in a humid place.  
Wrong filename  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
DXZ468RMP  
36  
9. ERROR DISPLAYS  
Error Display  
Cause  
Measure  
A DISC is caught inside the CD  
deck and is not ejected.  
This is a failure of CD deckʼs mechanism and  
consult your store of purchase.  
ERROR 2  
A DISC cannot be played due  
to scratches,etc.  
Replace with a non-scratched, non-warped-  
disc.  
ERROR 3  
ERROR 6  
A DISC is loaded upside-down  
inside the CD deck and does  
not play.  
Eject the disc then reload it properly.  
Error Display  
Cause  
Measure  
A CD inside the CD changer is This is a failure of CD changerʼs mechanism  
ERROR 2  
not loaded.  
and consult your store of purchase.  
A CD inside the CD changer  
cannot be played due to  
scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
ERROR 3  
ERROR 6  
A CD inside the CD changer  
cannot be played because it is  
loaded upside-down.  
Eject the disc then reload it properly.  
Error Display  
ERROR 2  
ERROR 3  
Cause  
Measure  
A DISC inside the DVD  
changer cannot be played.  
This is a failure of DVD mechanism and  
consult your store of purchase.  
A DISC cannot be played due  
to scratches, etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD chang- Eject the disc then reload it properly.  
er cannot be played because it  
is loaded upside-down.  
ERROR 6  
Parental level error.  
Region code error.  
Set the correct Parental level.  
ERROR P  
ERROR R  
Eject the disc and replace correct region code  
disc.  
DXZ468RMP  
37  
10.SPECIFICATIONS  
FM tuner  
Frequency Range: 87.5 MHz to 108 MHz  
Audio  
Maximum Power Output: 208 W 52 W X 4 ch  
(
)
(
Power Output: 4 X 25 W DIN 45324, B 14.4 V  
+ =  
)
Usable Sensitivity: 11 dBf  
(
Bass Control Action 100 Hz : ±14 dB  
)
50 dB Quieting Sensitivity: 17 dBf  
Alternate Channel Selectivity: 75 dB  
(
Treble Control Action 10 kHz : ±14 dB  
)
(
)
Stereo Separation 1 kHz : 35 dB  
(
)
Line Output with A/C 1 kHz, 10 kΩ : 1.8 V  
±
Frequency Response 3 dB : 30 Hz to 15 kHz  
(
)
General  
Power Supply Voltage:  
AM tuner  
Frequency Range:  
(
14.4 V DC 10.8 V to 15.6 V allowable , nega-  
tive ground  
)
MW 531 kHz to 1602 kHz  
LW 153 kHz to 279 kHz  
Current Consumption: Less than 15 A  
(
Speaker Impedance: 4 Ω 4 Ω to 8 Ω allowable  
)
Usable Sensitivity: 25 μV  
(
)
Weight: 2.42 lb. 1.1 kg  
Dimensions:  
178 mm Width X 50 mm Height X 152 mm  
Depth  
CD player  
System: Compact disc audio system  
Usable Discs: Compact disc  
±
Frequency Response: 10 Hz to 20 kHz 1 dB  
(
)
(
Signal-to-Noise Ratio: 85 dB 1 kHz IHF-A  
)
(
Dynamic Range: 80 dB 1 kHz  
)
Harmonic Distortion: 0.01%  
MP3  
Decode Format: MPEG 1,2 and 2.5 -Layer 3  
(
)
Sampling rate kHz : MPEG-1: 32,44.1,48  
Notes:  
• Specifications comply with JEITA Standards.  
MPEG-2: 16,22.05,24  
• Specifications and design are subject to change  
without notice for further improvement.  
MPEG-2.5: 8,11.025,12  
(
)
Bit-rate kbps : 8, 16, 24, 32, 40, 48, 56, 64,  
• Please make sure when connecting external power  
amplifier, that you properly, to the car chassis,  
ground the amplifier.  
80, 96, 112, 128, 144, 160, 192,  
224, 256, 320, VBR  
CD-ROM Format: ISO9660 Level 1, 2, Romeo  
and Joliet  
• If this is not done, severe damage to the source unit  
may happen.  
Folder Level Limit: 8 Level  
Folder Support: 255  
File Support: 512  
Folder Name: Maximum 64 bytes  
File Name: Maximum 64 bytes  
DXZ468RMP  
38  
Clarion Co., Ltd.  
Printed in Malaysia / Imprimé en Malaisie / Gedruckt in Malaysia / Stampato in Malaysia  
All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.  
PE-2800E  
Gedrukt in Maleisi / Impreso en Malasia / Tryckt i Malaysia / Impresso na Malásia  
280-8341-00  

A O Smith Genesis GW 1000 User Manual
Audiovox AV 970 User Manual
Audiovox P 955 User Manual
Canon HF R52 9173B004 User Manual
Casio SF 4985ER User Manual
Extron electronic Extron Electronics Cable Box 200 User Manual
Interfire Audio G2 1200 User Manual
Jensen Car Amplifier XA4150 User Manual
JL Audio J2320 4 User Manual
JVC GET0200 002A User Manual