Blaupunkt Santa Cruz CD31 User Manual

Radio / CD  
Konstanz CD31  
San Remo CD31  
Santa Cruz CD31  
Operating instructions  
OPERATING ELEMENTS  
1
2
button to release the control  
panel.  
8
AUDIO button to adjust the  
bass, treble, balance and fader  
settings.  
FMT button (Konstanz CD31) to  
select the FM memory levels,  
to switch to radio mode,  
9
:
Arrow buttons.  
MENU button to open the basic  
settings menus.  
to start the Travelstore function.  
BAND button (San Remo CD31  
and Santa Cruz CD31),  
to select the FM memory levels  
and MW / LW frequency range,  
to switch to radio mode,  
TS, to start the Travelstore func-  
tion.  
RDS button to switch the RDS  
feature on/off.  
To display scrolling text.  
button to display the time.  
;
<
Keys 1 - 5.  
TRAF button to switch traffic in-  
formation standby on/off.  
PTY, to switch the PTY function  
on/off.  
Volume control.  
, to increase the volume  
, to decrease the volume  
=
>
3
4
Button to switch the unit on/off.  
To mute the unit’s volume.  
SCAN button to start the scan  
function.  
5
6
CD compartment.  
X-BASS button for the X-Bass  
function.  
7
CD eject.  
CD•C button to select CD, radio  
and CD changer (if connected)  
sources.  
25  
CONTENTS  
Notes and accessories .......... 27 CD mode ................................ 38  
Road safety ................................... 27 Switching to CD mode .................. 38  
Installation ..................................... 27 Selecting tracks ............................ 38  
Accessories .................................. 27 Quick track selection ..................... 38  
Fast searching (audible) ................ 38  
Random play (MIX) ........................ 38  
Scanning tracks (SCAN) ............... 38  
Removable control panel ....... 28  
Switching on/off .................... 29  
Repeating tracks (REPEAT) ........... 39  
Pausing playback (PAUSE)............ 39  
Changing the display ..................... 39  
Removing the CD from the unit...... 39  
Adjusting the volume ............. 30  
Setting the power-on volume ......... 30  
Instantaneous volume reduction  
(mute) ........................................... 30  
Telephone audio / navigation audio .. 30  
Confirmation beep......................... 31  
CD changer mode.................. 40  
Switching to CD changer mode..... 40  
Selecting a CD.............................. 40  
Selecting tracks ............................ 40  
Quick track selection ..................... 40  
Fast searching (audible) ................ 40  
Changing the display ..................... 40  
Repeating individual tracks or  
whole CDs (REPEAT).................... 40  
Random play (MIX) ........................ 41  
Scanning all tracks on all CDs  
(SCAN) ......................................... 41  
Pausing playback (PAUSE)............ 41  
Radio mode............................ 32  
Switching to radio mode ................ 32  
Changing the display ..................... 32  
RDS functions (AF, REG) .............. 32  
Selecting the frequency range /  
memory ......................................... 33  
Tuning into a station....................... 33  
Setting the sensitivity of the station  
search mode ................................. 33  
Storing stations ............................. 34  
Storing stations automatically  
(Travelstore) .................................. 34  
Switching to preset stations........... 34  
Scanning receivable stations  
(SCAN) ......................................... 34  
Setting the scantime ...................... 35  
Programme type (PTY) .................. 35  
Treble reduction feature during  
CLOCK - Time ........................ 42  
Sound..................................... 43  
Adjusting the bass settings ............ 43  
Adjusting the treble settings........... 43  
Volume distribution ................ 43  
Adjusting the balance settings ....... 43  
interference (HICUT) ..................... 36 Adjusting the fader settings ........... 43  
Traffic information reception . 37 X-BASS .................................. 44  
Switching traffic information  
priority on/off ................................. 37  
Setting the traffic announcement  
External audio sources .......... 44  
Specifications ........................ 45  
volume .......................................... 37  
26  
Guarantee .............................. 45  
Installation instructions........ 172  
NOTES AND ACCESSORIES  
Thank you for deciding to purchase a  
Blaupunkt product. We hope you enjoy  
using this new piece of equipment.  
Before using the device for the first time,  
please read these instructions carefully.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the unit  
please contact your dealer or the tele-  
phone hotline for your country.You will  
find the hotline telephone numbers print-  
ed at the back of this booklet.  
Accessories  
Only use accessories approved by Blau-  
punkt.  
Remote control  
The optional RC 08 or RC 10 remote  
controls allow you to safely and conven-  
iently access the most important func-  
tions of your car radio from your steer-  
ing wheel.  
Amplifier  
All Blaupunkt amplifiers can be used.  
CD changer  
Road safety  
You can connect the following Blaupunkt  
CD changers:  
CDC A 06, CDC A 08, CDC A 072 and  
IDC A 09.  
You can also connect the CDC A 05 and  
CDC A 071 CD changers by using an  
adapter cable (Blaupunkt no.7 607 889  
093).  
Road safety has absolute prior-  
ity. Only operate your car radio if the  
road and traffic conditions allow you  
to do so.Familiarise yourself with the  
unit before setting off on your jour-  
ney.  
You should always be able to hear  
police, fire and ambulance sirens  
from afar. For this reason, set the  
volume of whatever you are listen-  
ing to to a reasonable level.  
Installation  
If you want to install your car radio your-  
self, please read the installation and  
connection instructions that follow these  
operating instructions.  
27  
REMOVABLE CONTROL PANEL  
G Press the  
button 1.  
Removable control panel  
The control panel locking mechanism  
opens.  
Theft protection  
As a way of protecting your car radio  
against theft, the unit is equipped with  
a removable control panel (release pan-  
el). Without this control panel, the car  
radio is worthless to a thief.  
Protect you car radio against theft by  
taking the control panel with you every  
time you leave your vehicle.Do not leave  
the control panel in your vehicle - not  
even in a hiding place.  
G First, pull the control panel straight  
off the unit and then out towards  
the left.  
G The unit switches off after the con-  
trol panel is removed.  
G All the current settings are saved.  
G Any CD already inserted in the unit  
remains there.  
The control panel has been designed  
to be easy to use.  
Attaching the control panel  
G Slide the control panel from left to  
right into the unit’s panel locking  
mechanism.  
Note:  
G Never drop the control panel.  
G Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
G Press the left-hand edge of the  
control panel into the unit until it  
clicks into place.  
G Store the control panel in the sup-  
plied case.  
G Avoid making direct skin contact  
with the control panel’s contacts. If  
necessary, clean the contacts with  
a lint-free cloth soaked in cleaning  
spirits.  
Removing the control panel  
Note:  
G When attaching the control panel,  
make sure you do not press the  
display.  
1
If the unit was still switched on when  
you removed the control panel, the unit  
will automatically switch on with the last  
settings activated (i.e. radio, CD, CD  
changer, or AUX) when the panel is re-  
placed.  
28  
SWITCHING ON/OFF  
Switching on by inserting a CD  
Switching on/off  
If the unit is switched off and there is no  
CD inserted in the drive,  
There are various ways of switching the  
unit on/off:  
G Gently insert the CD with the print-  
ed side uppermost into the drive  
until you feel some resistance.  
Switching on/off using the vehicle  
ignition  
If the unit is correctly connected to the  
vehicle’s ignition and it was not switched  
off using button >, it will switch on/off  
simultaneously with the ignition.  
The CD will be drawn automatically into  
the drive.  
You must not hinder or assist the drive  
as it draws in the CD.  
You can also switch the unit on even if  
the ignition is off:  
The unit switches on. CD playback be-  
gins.  
G To do so, press button >.  
Note:  
G To protect the vehicle battery, the  
unit will switch off automatically af-  
ter one hour if the ignition is off.  
Switching on/off using the  
removable control panel  
G Remove the control panel.  
The unit switches off.  
G Attach the control panel again.  
The unit switches on. The last settings  
(radio, CD, CD changer or AUX) will be  
reactivated.  
Switching on/off using button >  
G To switch the unit on, press button  
>.  
G To switch the unit off, press button  
> for longer than two seconds.  
The unit switches off.  
29  
ADJUSTING THE VOLUME  
Adjusting the volume  
The system volume can be adjusted in  
steps from 0 (off) to 66 (maximum).  
Instantaneous volume reduction  
(mute)  
This feature allows you to instantane-  
ously reduce (mute) the volume to a lev-  
el preset by you.  
To increase the system volume,  
G press the button =.  
To decrease the system volume,  
G press the button =.  
G Briefly press button >.  
“MUTE” appears in the display.  
Setting the mute level  
Setting the power-on volume  
You can set the default volume at which  
the unit switches on.  
You can set the unit’s mute volume lev-  
el.  
G Press the MENU button :.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “MUTE LVLappears in the  
display.  
G Keep pressing the or button  
9 until “ON VOLappears in the  
display.  
G Set the mute level using the and  
G Set the power-on volume using the  
buttons 9.  
and buttons 9.  
When you have finished making your  
changes,  
To help you adjust the volume more  
easily, the volume will be increased /  
decreased as you make your changes.  
G press the MENU button : twice.  
If you change the setting to0”, the pow-  
er-on volume will be the same as the  
volume level that was set before the unit  
was last switched off.  
Telephone audio / navigation  
audio  
If your car radio is connected to a mo-  
bile telephone or a navigation system,  
the unit’s volume will be muted as soon  
as you “pick up” the telephone or as  
soon as a navigation announcement is  
made.The caller or voice output will then  
be heard over the car radio loudspeak-  
ers. In order for this to work, the mobile  
telephone or navigation system must be  
connected to the car radio in the man-  
ner described in the installation instruc-  
tions.  
Note:  
G To protect your hearing, the power-  
on volume is limited to a value of  
“38”. If the volume level was higher  
when the unit was switched off, the  
volume will be reset to “38” when  
the unit is switched on again.  
When you have finished making your  
changes,  
G press the MENU button : twice.  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car radio.  
30  
ADJUSTING THE VOLUME  
If a traffic information message is re-  
ceived during a telephone call or whilst  
a navigation announcement is being  
made, the traffic message will only be  
played after the call or voice output is  
finished.  
Confirmation beep  
For some functions you will hear a con-  
firmation beep if you keep a button  
pressed for longer than two seconds.  
For instance, after storing a radio sta-  
tion to a station button you will hear a  
confirmation beep. The beep can be  
switched on/off.  
If you are already listening to a traffic  
announcement and a telephone call  
arrives or the navigation system wish-  
es to make a voice output, the traffic  
announcement will first be heard. Once  
the traffic message is finished, you can  
listen to the call or the voice output.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “BEEP” appears in the dis-  
play.  
You can set the volume level at which  
telephone calls and the navigation voice  
output will first be heard.  
G Use the and buttons 9 to  
switch between the options.  
“OFFmeans beep off, “ONmeans the  
beep is switched on.  
G Press the MENU button :.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “TEL VOLappears in the  
display.  
G Set the required volume using the  
and buttons 9.  
When you have finished making your  
changes,  
G press the MENU button : twice.  
Note:  
G Using the volume control =, you  
can directly adjust the volume of  
telephone calls and navigation  
voice output (whilst they are being  
heard).  
31  
RADIO MODE  
Radio mode  
This unit is equipped with an RDS radio  
receiver.Many of the receivable FM sta-  
tions transmit a signal that not only car-  
ries the programme but also additional  
information such as the station name  
and programme type (PTY).  
use the REG function to prevent  
the car radio from switching to al-  
ternative frequencies that are  
transmitting different programme  
content.  
Note:  
G REG must be separately activated/  
The station name appears in the dis-  
play as soon as it is received.  
deactivated in the menu.  
Switching REG on/off  
Switching to radio mode  
If you are in CD, CD changer or AUX  
mode,  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “REG” appears in the dis-  
play.  
G press the FMT or BAND (TS) but-  
ton 2.  
“OFF” or “ON” is displayed alongside  
“REG”.  
Or  
To switch REG on/off,  
G keep pressing the CD•C button 7  
until “RADIO” appears in the dis-  
play.  
G press the or button 9.  
G Press the MENU button :.  
Changing the display  
To briefly display the time,  
Switching the RDS function on/off  
To use the RDS functions (AF and  
REG),  
G keep the MENU ( ) button :  
pressed until the time appears in  
the display.  
G press the RDS button 3.  
The RDS functions are active when  
“RDSlights up in the display.When the  
RDS functions (AF, REG)  
The RDS functions AF (Alternative Fre- RDS functions are switched on, “REG  
quency) and REG (Regional) extend ON” or “REG OFF” appears briefly in  
your radio’s range of functions.  
the display.  
G AF: If this RDS function is activat-  
ed, the unit automatically tunes into  
the best receivable frequency for  
the station that is currently set.  
G REG: At certain times, some radio  
stations divide their programme  
into regional programmes providing  
different regional content.You can  
32  
RADIO MODE  
Selecting the frequency range /  
memory  
Setting the sensitivity of the  
station search mode  
This unit can receive programmes You can configure the radio to only tune  
broadcast over the FM, MW and LW fre- into stations with a strong reception or  
quency ranges.  
to also tune into those with a weak re-  
ception.  
Note:  
G Press the MENU button :.  
G The MW and LW frequency ranges  
are not available on the Konstanz  
CD31.  
G Keep pressing the or button  
9 until “SENS” appears in the dis-  
play.  
There are three preset memory levels  
for the FM range and one for each of  
the MW and LW ranges. Five stations  
can be stored on each memory level.  
G Press the button 9.  
The display shows the currently set val-  
ue for sensitivity.SENS HI6means that  
the tuner is highly sensitive.SENS LO1”  
means it is set to the lowest sensitivity  
setting.  
Selecting the memory level  
To switch between the FM memory lev-  
els and the MW and LW frequency rang-  
es,  
If “SENS LO” is selected, “lo” lights up  
in the display.  
G keep pressing the FMT or BAND  
(TS) button 2 until the required  
frequency range / memory level is  
displayed.  
G Set the required sensitivity using  
the and buttons 9.  
G Press the MENU button :.  
Tuning into a station  
There are various ways of tuning into a  
station.  
Tuning into stations manually  
You can also tune into stations manual-  
ly.  
Automatic seek tuning  
Note:  
G Press the or button 9.  
G You can only tune into stations  
manually if the RDS function is de-  
activated.  
The unit tunes into the next receivable  
station.  
G Press the or button 9.  
Browsing through broadcasting  
networks (only FM)  
If a radio station provides several pro-  
grammes, you have the option of brows-  
ing through its so-called “broadcasting  
network”.  
33  
RADIO MODE  
Note:  
The station storing procedure begins.  
T-STORE” appears in the display.After  
the process is completed, the station  
stored in FMT memory location 1 will  
be played.  
G If you want to use this feature, the  
RDS function must be activated.  
G Press the or button 9 to  
switch to the next station on the  
broadcasting network.  
Switching to preset stations  
When using this feature, you will only  
be able to switch to stations that you  
have received once already. To do so,  
use either the Travelstore function or  
allow the automatic seek tuning feature  
to run once through the entire frequen-  
cy range.  
G Select the memory level on which  
the station was stored.  
G Press the preset station button of  
the station you want to listen to.  
Scanning receivable stations  
(SCAN)  
You can briefly play all the receivable  
stations.You can set the scanning time  
to between 5 and 30 seconds in the  
menu.  
Storing stations  
Storing stations manually  
G Select the required FM1 / FM2 /  
FMT memory or MW / LW frequen-  
cy range (MW and LW are not  
Starting SCAN  
available on the Konstanz CD31).  
G Press the SCAN button 4.  
G Tune into the station.  
Scanning begins.SCANappears brief-  
ly in the display followed by the current  
frequency (which flashes).  
G Press one of the station buttons 1 -  
5 ; for longer than one second to  
store the station to that button.  
Stopping SCAN and continuing  
listening to a station  
Storing stations automatically  
(Travelstore)  
G Press the SCAN button 4 again.  
Scanning is stopped and the station that  
was tuned into last will remain active.  
You can automatically store the five sta-  
tions with the strongest reception in the  
region (only for FM). The stations are  
stored in the FMT memory.  
Note:  
G Stations that were previously  
stored in this memory are deleted  
in the process.  
G Keep the FMT or BAND (TS) but-  
ton 2 pressed for longer than two  
seconds.  
34  
RADIO MODE  
Note:  
Setting the scantime  
G If no station is found that corre-  
sponds to the selected programme  
type, you will hear a beep and “NO  
PTY” appears briefly in the display.  
The station that was listened to last  
will then be tuned into again.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “SCANTIME” appears in  
the display.  
G Set the required scantime using  
G If the tuned radio station or another  
station on the broadcasting net-  
work broadcasts the required pro-  
gramme type at a later point in  
time, the radio automatically  
switches from the currently tuned  
station or from CD mode / CD  
changer mode to the station whose  
programme type matches the one  
you selected.  
the and buttons 9.  
When you have finished making your  
changes,  
G press the MENU button : twice.  
Note:  
G The set scantime also applies to  
scanning in CD and CD changer  
mode.  
Programme type (PTY)  
Switching PTY on/off  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting.  
G Keep the TRAF (PTY) button <  
pressed until “PTY” appears in or  
disappears from the display.  
The programme type appears briefly in  
the display when you switch PTY on.  
For example, the programme types can  
be:  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS POP  
MUSIC  
JAZZ  
Selecting a programme type and  
starting seek tuning  
G Press the or button 9.  
The current programme type appears  
in the display.  
Using the PTY function, you can direct-  
ly select stations of a particular pro-  
gramme type.  
G If you want to select another pro-  
gramme type, you can do so by  
pressing the or button 9  
whilst in this display.  
PTY-EON  
If you specify the programme type and  
start seek tuning, the radio will switch  
from the current station to a station of  
the selected programme type.  
Or  
G Press one of the buttons 1 - 5 ; to  
select a programme type that is  
stored on one of these buttons.  
35  
RADIO MODE  
The selected programme type is dis-  
played briefly.  
Treble reduction feature during  
interference (HICUT)  
G Press the or button 9 to start  
The hicut function improves reception  
during poor radio reception. If interfer-  
ence occurs, the treble is automatically  
reduced.  
seek tuning.  
The next station corresponding to your  
selected programme type will then be  
tuned into.  
Switching hicut on/off  
Storing a programme type on a  
station button  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “HICUT” appears in the  
display.  
G Select a programme type using the  
or button 9.  
G Press and hold the required button  
G Press the or button 9 to  
1 - 5 ; until you hear a beep.  
switch HICUT on/off.  
The programme type is now stored on  
the station button 1 - 5 ; that you se-  
lected.  
“HICUT 0” means that treble will not be  
reduced, andHICUT 1means that tre-  
ble will be reduced.  
Selecting the PTY language  
G Press the MENU button :.  
You set the language in which the pro-  
gramme type is displayed.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “PTY LANG” appears in  
the display.  
G Press the or button 9 to  
switch between German, English  
and French.  
When the required language appears  
in the display,  
G press the MENU button : twice.  
36  
TRAFFIC INFORMATION RECEPTION  
Setting the traffic  
announcement volume  
Traffic information  
reception  
G Press the MENU button :.  
Switching traffic information  
priority on/off  
G Keep pressing the or button  
9 until “TA VOLUME” appears in  
the display.  
G Press the TRAF button <.  
Traffic announcement priority is active  
when a traffic jam symbol lights up in  
the display.  
G Set the announcement volume us-  
ing the and buttons 9.  
G Press the MENU button :.  
Note:  
You will hear a warning sound  
G if you leave the reception area of a  
traffic information station that you  
are currently listening to.  
G if, while listening to a CD, you leave  
the reception area of a traffic infor-  
mation station that you are tuned  
into and the subsequent automatic  
search cannot find a new traffic in-  
formation station.  
G if you retune the radio from a traffic  
information station to a station that  
does not broadcast traffic informa-  
tion.  
If you hear the warning sound, you can  
either switch off traffic information pri-  
ority or tune into a station that broad-  
casts traffic information.  
37  
CD MODE  
CD mode  
You can use this unit to play standard  
CDs with a diameter of 12 cm.  
If you press the  
the current track will be played again  
from the beginning.  
/
button 9 once,  
Quick track selection  
To quickly select tracks backwards or  
forwards,  
Risk of damage to the CD drive!  
CD singles with a diameter of 8 cm  
and contoured CDs (shape CDs) are  
not suitable for playback in this unit.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
G keep one of the or buttons 9  
pressed until fast-reverse / fast-for-  
ward track selection begins.  
Fast searching (audible)  
To fast search backwards or forwards,  
Switching to CD mode  
G If there is no CD inserted in the  
G keep one of the  
buttons 9  
pressed until fast reversing / fast  
forwarding begins.  
drive.  
G Gently insert the CD with the print-  
ed side uppermost into the CD  
compartment until you feel some  
resistance.  
Random play (MIX)  
G Press button 4 (MIX) ;.  
MIX appears in the display. The next  
randomly selected track will then be  
played.  
The CD will be drawn automatically into  
the drive.  
Do not use force when inserting the CD.  
You must not hinder or assist the drive  
as it draws in the CD.  
Stopping MIX  
G Press button 4 (MIX) ; again.  
MIX disappears from the display.  
CD playback begins.  
G If a CD is already inserted in the  
Scanning tracks (SCAN)  
drive.  
You can briefly play all the tracks on a  
CD.  
G Keep pressing the CD•C button 7  
until “CD” appears in the display.  
G Press the SCAN button 4.  
Playback begins from the point at which  
it was last interrupted.  
Note:  
G You can set the scantime. For fur-  
ther details, read the section enti-  
tled “Setting the scantime” in the  
“Radio mode” chapter.  
Selecting tracks  
G Press one of the  
/
or  
/
but-  
tons 9 to select the next or previ-  
ous track.  
38  
CD MODE  
Stopping SCAN and continuing  
playback  
G Press the button 9.  
The current setting is displayed.TIME”  
for the playing time display and “PLAY”  
for the track number display.  
To stop scanning,  
G press the SCAN button 4 again.  
G Press the button 9 to select the  
The current track will then continue to  
be played.  
required setting.  
G Press the MENU button : twice.  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
G press button 3 (RPT) ;.  
Removing the CD from the unit  
To remove the CD from the unit,  
G keep the CD•C button 7 pressed  
RPT appears in the display.The track is  
repeated until you deactivate RPT.  
until the CD is ejected.  
Cancelling the repeat function  
If you want to cancel the repeat func-  
tion,  
G press button 3 (RPT) ; again.  
RPT disappears. Normal playback is  
then continued.  
Pausing playback (PAUSE)  
G Press button 2 ( ) ;.  
PAUSE” appears in the display.  
Cancelling pause  
G Press button 2 ( ) ; while in  
pause mode.  
Playback is continued.  
Changing the display  
To switch between the track number dis-  
play and the track number / playing time  
display,  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “CD DISP” appears in the  
display.  
39  
CD CHANGER MODE  
CD changer mode  
Fast searching (audible)  
To fast search backwards or forwards,  
Note:  
G Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
G keep one of the  
buttons 9  
pressed until fast reversing / fast  
forwarding begins.  
Changing the display  
To switch between the track number /  
CD number display and the track  
number / playing time display,  
Switching to CD changer mode  
G Keep pressing the CD•C button 7  
until “CHANGER” appears in the  
display.  
G press the MENU button :.  
G Keep pressing the or button  
9 until “CDC DISP” appears in the  
display.  
Playback begins with the first CD that  
the CD changer detects.  
Selecting a CD  
G Press the button 9.  
To move up or down to another CD,  
The current setting is displayed.TIME”  
for the playing time display andCD NO”  
for the CD number display.  
G press the or button 9 once or  
several times.  
G Press the button 9 to select the  
Selecting tracks  
To move up or down to another track on  
the current CD,  
required setting.  
G Press the MENU button : twice.  
Repeating individual tracks or  
whole CDs (REPEAT)  
G press the or button 9 once or  
several times.  
To repeat the current track,  
Quick track selection  
To quickly select tracks backwards or  
forwards,  
G briefly press button 3 (RPT) ;.  
“RPT TRCK” appears briefly and RPT  
lights up in the display.  
G keep one of the or buttons 9  
pressed until fast-forward / fast-re-  
verse track selection begins.  
To repeat the current CD,  
G press button 3 (RPT) ; again.  
“RPT DISC” appears briefly and RPT  
lights up in the display.  
40  
CD CHANGER MODE  
Cancelling the repeat function  
Stopping SCAN  
To stop the current track or current CD To stop scanning,  
from being repeated,  
G briefly press the SCAN button 4  
G keep pressing button 3 (RPT) ;  
until “RPT OFF” appears in the dis-  
play and RPT disappears.  
again.  
The current track will then continue to  
be played.  
Random play (MIX)  
Note:  
G You can set the scantime. For fur-  
ther details, read the section enti-  
tled “Setting the scantime” in the  
“Radio mode” chapter.  
To play the tracks on the current CD in  
random order,  
G briefly press button 4 (MIX) ;.  
“MIX CDappears briefly and MIX lights  
up in the display.  
Pausing playback (PAUSE)  
G Press button 2 ( ) ;.  
To play the tracks on all inserted CDs in  
random order,  
PAUSE” appears in the display.  
G press button 4 (MIX) ; again.  
Cancelling pause  
“MIX ALLappears briefly and MIX lights  
up in the display.  
G Press button 2 ( ) ; while in  
pause mode.  
Stopping MIX  
Playback is continued.  
To stop the tracks from being played in  
random order,  
G keep pressing button 4 (MIX) ;  
until “ MIX OFF” appears in the dis-  
play and MIX disappears.  
Scanning all tracks on all CDs  
(SCAN)  
To scan all the tracks on all inserted CDs  
in ascending order,  
G press the SCAN button 4.  
“SCAN” appears in the display.  
41  
CLOCK - TIME  
CLOCK - Time  
G Press the or button 9 to  
switch between the modes.  
Displaying the time  
To display the time,  
When you have finished making your  
changes,  
G Keep the MENU ( ) button :  
pressed until the time appears in  
the display.  
G press the MENU button :.  
Displaying the time when the  
unit is off and the ignition is on  
To display the time when the unit is off  
and the ignition is on,  
Setting the time  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “CLOCKSET” appears in  
the display.  
G press the MENU button :.  
“MENU” appears in the display.  
G Keep pressing the or button  
9 until “CLOCK OFF” or “CLOCK  
ON” appears in the display.  
G Press the button 9.  
The time appears in the display. The  
minutes flash on and off and can be  
adjusted.  
G Press the or button 9 to  
switch between the displays.  
G Adjust the minutes using the  
/
When you have finished making your  
changes,  
buttons 9.  
Once the minutes are set,  
G press the button 9.  
The hours flash on and off.  
G press the MENU button :.  
Briefly displaying the time when  
the unit is switched off  
To briefly display the time when the unit  
is off,  
G Adjust the hours using the  
/
buttons 9.  
When you have finished making your  
changes,  
G press the MENU ( ) button :.  
The time is displayed for around 8 sec-  
onds.  
G press the MENU button : twice.  
Selecting 12/24-hour clock  
mode  
G Press the MENU button :.  
“MENU” appears in the display.  
G Keep pressing the or button  
9 until “24 H MODE” or “12 H  
MODE” appears in the display.  
42  
SOUND  
Sound  
VOLUME DISTRIBUTION  
Volume distribution  
Adjusting the bass settings  
To adjust the BASS,  
Adjusting the balance settings  
To adjust the left/right volume distribu-  
tion (balance),  
G press the AUDIO button 8.  
“BASS” appears in the display.  
G press the AUDIO button 8.  
“BASS” appears in the display.  
G Press the or button 9 to ad-  
G Keep pressing the or button 9  
just the bass.  
until “BALappears in the display.  
Adjusting the treble settings  
To adjust the TREBLE,  
G Press the or button 9 to ad-  
just the balance (right/left).  
G press the AUDIO button 8.  
“BASS” appears in the display.  
Adjusting the fader settings  
To adjust the front/back volume distri-  
bution (fader),  
G Keep pressing the or button 9  
until “TREB” appears in the display.  
G press the AUDIO button 8.  
“BASS” appears in the display.  
G Press the or button 9 to ad-  
just the treble.  
G Keep pressing the or button 9  
until “FADER” appears in the dis-  
play.  
G Press the or button 9 to ad-  
just the fader (front/back).  
43  
X-BASS  
X-BASS  
EXTERNAL AUDIO SOURCES  
External audio sources  
The X-BASS feature can be used to Instead of connecting a CD changer,  
boost the bass at low volume levels.  
you can also connect another audio  
source equipped with a line output.The  
audio source, for example, can be a  
portable CD player, MiniDisc player or  
MP3 player.  
Adjusting the X-BASS boost  
settings  
The X-BASS boost can be set in steps  
ranging from 1 to 3.  
If you want to connect an external au-  
dio source you will need a Blaupunkt  
adapter cable (Blaupunkt no.:7 607 897  
093).  
“X-BASS OFF” means that the X-BASS  
feature is switched off.  
G Press the X-BASS button 6.  
The AUX input must be activated in the  
menu.  
G Keep pressing the  
or  
but-  
ton 9 until the required setting ap-  
pears in the display.  
Switching the AUX input on/off  
If the X-BASS boost is set to a value of  
1, 2 or 3, the X-BASS symbol appears  
in the display.  
G Press the MENU button :.  
G Keep pressing the or button  
9 until “AUX OFF” or “AUX ON”  
appears in the display.  
When you have finished making your  
changes,  
G Press the or button 9 to  
G press the X-BASS button 6.  
switch AUX on/off.  
G Press the MENU button :.  
Note:  
The AUX input can now be selected by  
pressing the CD•C button 7.  
44  
SPECIFICATIONS  
Specifications  
Amplifier  
GUARANTEE  
Guarantee  
The scope of the guarantee is orientat-  
ed around the regulations in force with-  
in the country in which the unit was pur-  
chased.  
Output power:  
4 x 25 watts sine  
in accordance  
with DIN 45 324  
at 14.4 V  
4 x 45 watts max.  
power  
If your unit develops a fault, please con-  
tact your dealer and present the pur-  
chase receipt.  
If the statutory guarantee period in your  
country is less than 12 months, Blau-  
punkt will grant a 12-month manufac-  
turer’s guarantee.This guarantee does  
not cover damage due to wear, incor-  
rect usage or commercial use.  
Tuner  
Frequency ranges:  
FM:  
MW:  
LW:  
87.5 – 108 MHz  
531 – 1,602 kHz  
153 – 279 kHz  
If you wish to enforce a claim under the  
manufacturer’s guarantee that is provid-  
ed by Blaupunkt, please send the faulty  
unit together with the purchase receipt  
to the Blaupunkt customer service cen-  
tre in your country. You can find out  
which address is closest to you by con-  
tacting the telephone hotline listed on  
the back page of this booklet.Blaupunkt  
retains the right to rectify defects or sup-  
ply a replacement.  
FM frequency response:  
35 - 16,000 Hz  
CD  
Frequency response:  
20 - 20,000 Hz  
3 V  
Pre-amp out  
4 channels:  
Input sensitivity  
AUX input:  
Tel./Nav. input:  
2 V / 6 kOhm  
10 V / 1 kOhm  
Subject to changes!  
45  

BlueAnt Wireless V12 User Manual
BMW CN1013887ID User Manual
Braun MX 2000 User Manual
Casio Dm 1200ms S Ih Simple Calculator DM1200MSSIH User Manual
Casio Geometry User Manual
Citizen Calculator CT 300J User Manual
Continental Electric PLATINUM SERIES CP42148 User Manual
Hitachi DZ HS803A User Manual
Hypertec N17118NHY User Manual
Hypertec TSV154V1HY User Manual