Blaupunkt MIAMI 100 USB User Manual

(GB) 12/09  
Safety notes  
Cleaning notes  
Front view of the car sound system  
Notes concerning MP3/WMA files and data carriers  
The car sound system was manufactured according to the state of the art and  
established safety guidelines. Even so, dangers may occur if you do not observe  
the safety notes in these instructions.  
Solvents, cleaning and scouring agents as well as dashboard spray and plastics care prod-  
uct may contain ingredients that will damage the surface of the car sound system. Use  
only a dry or slightly moistened cloth for cleaning the car sound system.  
Note the following information when preparing an MP3/WMA data carrier:  
ON/OFF button  
CD slot  
Display  
Front AUX IN socket  
Naming of tracks and directories:  
Max. 16 characters (CD) or 24 characters (USB1) incl. the file extension .mp3” or  
.wma” (if more characters are used, the number of tracks and folders that are rec-  
ognisable by the car sound system is reduced)  
Radio CD MP3 WMA USB  
These instructions contain important information to easily and safely install and operate  
the car sound system.  
Read these instructions carefully and completely before using the car sound system.  
Keep the instructions at a location so that they are always accessible to all users.  
Always pass on the car sound system to third parties together with these instructions.  
Disposal notes  
Do not dispose of your old unit in the household trash!  
No special characters  
Use the return and collection systems available to dispose of the old device.  
CD formats: Audio CD (CDDA), CD-R/RW, Ø: 12 cm  
CD data formats: ISO 9669 Level 1 and 2, Joliet  
CD burn speed: Max. 16x (recommended)  
USB devices1: USB sticks only (no USB hard disks)  
USB format/file system1: Mass storage device/FAT16, FAT32  
File extension of audio files:  
Scope of delivery  
In addition, observe the instructions of the devices used in conjunction with this car sound  
system.  
The scope of delivery includes:  
1 Car sound system  
1 Operating/installation instructions  
1 Support frame  
1 Set of small parts  
2 Disassembly tools  
Road safety  
Observe the following notes about road safety:  
Miami 100  
Miami 100 USB  
ForthefrontAUX-INsocket,useonlytheangledjackplugfromBlaupunkt(7607001535).  
All protruding parts, incl. straight plugs or adapters, can lead to an increased injury risk in  
case of an accident.  
Use your device in such a way that you can always safely control your vehicle. In  
case of doubt, stop at a suitable location and operate your device while the vehicle is  
standing.  
Features  
RDS tuner  
.MP3 for MP3 files  
.WMA for WMA files  
For Miami 100 USB only:  
1 USB connecting cable  
This car sound system is equipped with an RDS tuner that supports features such as dis-  
play of station names, alternative frequencies, REG (regional programmes), and priority  
for traffic announcements.1  
WMA files only without Digital Rights Management (DRM) and created with Windows  
Media Player version 8 or later  
Extended scope of delivery (not included in Europe devices):  
1 Connecting cable chamber A (power supply)  
1 Connecting cable chamber B (loudspeaker)  
1 Connecting cable chamber C1 (Line-Out)  
1 Antenna connection adapter  
MP3 ID3 tags: Version 1 and 2  
Bit rate for creating audio files:  
Always listen at a moderate volume to protect your hearing and to be able to hear  
acoustic warning signals (e.g. police sirens).  
Audio media  
This car sound system can play audio CDs (CDDA) as well as MP3 and WMA files from CD-R,  
MP3: 32 to 320 kbps  
WMA: 32 to 192 kbps  
CD-RW and USB sticks2.  
General safety notes  
Observe the following notes to protect yourself against injuries:  
Do not modify or open the device. The device contains a Class 1 laser that can cause  
injuries to your eyes.  
Max. number of tracks (USB1): 27,000  
External audio sources  
You can connect external audio sources such as MP3 players or portable CD players to this  
car sound system via the front AUX IN socket.  
Note:  
We recommend the use of original Blaupunkt accessories (www.blaupunkt.com).  
Use as directed  
Code protection  
This car sound system is intended for installation and operation in a vehicle with 12 V  
vehicle system voltage and must be installed in a DIN slot. Observe the performance lim-  
its in the technical data. Repairs and installation, if necessary, should be performed by a  
specialist.  
You can protect the car sound system against theft by activating the four-digit code query  
(see section “Code protectionoverleaf).  
Telephone Mute  
If a telephone is connected to this car sound system (mute signal of the telephone to  
chamber A, pin 2 on the rear of the unit; see section “Installation instructions” overleaf),  
the system is muted automatically when the telephone receives a call. For the period of  
the call, “TELEPHONEis displayed.  
Installation instructions  
You may only install the car sound system yourself if you are experienced in installing car  
sound systems and are very familiar with the electrical system of the vehicle. For this pur-  
pose, observe the installation instructions overleaf.  
PTY emergency announcements  
Operating and installation instructions  
If this car sound system receives a PTY 31 emergency announcement, the announcement  
is switched through automatically regardless of the current audio source. When an emer-  
gency announcement is switched through, “ALARMis displayed.  
Declaration of conformity  
The Blaupunkt AudioVision GmbH declares that the car sound system Miami 100 com-  
plies with the basic requirements and the other relevant regulations of the directive  
89/336/EEC.  
8 622 450 117  
Blaupunkt (International) GmbH  
Robert-Bosch-Straße 200  
D-31139 Hildesheim  
1
RDS features are only available in FM waveband. They are not supported in some countries.  
Miami 100 USB only.  
2
1
Miami 100 USB only.  
General functions  
Functions in radio mode  
Functions in CD mode (CDDA/MP3/WMA) and USB mode1 (MP3/WMA)  
Function  
Action  
Function  
Action  
Function  
Action  
Switch device on.  
Switch device off.  
Press the ON/OFF button briefly.  
Press the ON/OFF button for more than 1 second.  
Turn the ON/OFF button.  
Change frequency stepwise.  
Change frequency continuously.  
Press the  
/
button briefly.  
Select previous/next track.  
Select previous/next folder2.  
Fast scroll through folders2.  
Fast search backwards/forwards.  
Pause or resume playback.  
Select Repeat option:  
Press the  
/
/
button briefly.  
button briefly.  
Press and hold down the  
/
button.  
Press the  
Note  
Adjust the volume (levels 0 50)  
Press and hold down the  
Press and hold down the  
Press the 3 button.  
/
/
button.  
button.  
When you release the  
cally. You may stop station seek tuning at the current frequency by briefly pressing the  
button.  
/
button the next available station is searched for automati-  
Note  
Volume change is not possible during menu settings. Turning the ON/OFF button is  
used to set values.  
Press the 4 RPT button once or repeatedly.  
Start automatic station seek tuning.  
Press the  
/
button briefly.  
Mute the device or return to the previous volume level.  
Press the ON/OFF button briefly.  
Repeat current track:  
Repeat current folder2:  
‘RPT TRACK’  
‘RPT DIR’  
Stop automatic station seek tuning at current frequency.  
Press the button briefly.  
When the device is muted, “MUTEis displayed.  
Press the SRC button once or repeatedly.  
Press the DISP button for more than 1 second.  
Press station button 2 briefly.  
Select audio source FM1/FM21/FMT1/MW1/LW1/AM1/AMT1/CD2/USB2/FRONT AUX2.  
Select display brightness for day or night.3  
Cancel a traffic announcement.4  
Store station on the current memory bank.  
Store stations automatically on memory bank FMT or AMT1.  
Press a station button 1 5 for more than 1 second.  
Resume normal playback: ‘RPT OFF’  
Select Mix option:  
Select the FM or AM1 waveband.  
Press the 5 MIX button once or repeatedly.  
Press the SRC button for more than 1 second.  
Press a station button 1 5 briefly.  
Mix all tracks on CD:  
Mix current folder2:  
‘MIX ALL’  
‘MIX DIR’  
Play stored station of the current memory bank.  
Scan receivable stations.2  
Insert CD.  
Note  
Press the MENU button for more than 1 second.  
Press the MENU button briefly.  
You must not hinder or assist the drive as it automatically draws in the CD.  
Resume normal playback: ‘MIX OFF’  
Scan all tracks on CD.3  
Risk of severe damage to the CD drive!  
Noncircular contoured CDs (shape CDs) and CDs with a diameter of 8 cm (mini  
CDs) must not be used.  
Cancel scanning at current station.  
Scan stored stations of the current memory bank.2  
Gently insert the CD with its printed side uppermost into the drive until you feel some  
Press the MENU button for more than 1 second.  
Press the MENU button.  
Press the DISP button once or repeatedly.  
resistance and the CD is drawn in automatically.  
Press the  
/
/
button for more than 1 second.  
button briefly.  
Cancel scanning at current track.  
Select display mode:  
Remove CD.  
Press the button.  
Cancel scanning at current station.  
Press the  
Note  
Select display mode (display of frequency or, if available, station name).  
Press the DISP button briefly.  
CDDA:  
CD text (if available)  
If a CD is ejected and not removed, the drive will automatically draw it back in again  
after approx. 10 seconds.  
Insert the jack plug of the external device into the front AUX IN socket.  
Track number and total time  
Track number and elapsed time  
MP3/WMA: Song name (if available)  
File name  
Connect external audio source.  
Danger! Increased risk of injury from connector.  
In case of an accident, the protruding connector in the front AUX-IN socket may  
cause injuries. The use of straight plugs or adapters leads to an increased risk of  
injury. For this reason, we recommend using angled jack plugs.  
Elapsed time  
Artist (if available)  
Album (if available)  
Connect/disconnect USB stick.5  
Note  
The supplied USB cable must be connected to the USB socket on the rear of the unit (see  
section “Installationoverleaf).  
Switch of the car sound system so that the data carrier will be correctly registered and  
unregistered.  
Connect the USB stick to the USB cable or pull the USB stick off.  
1
Only if the memory bank is switched on (BAND submenu in the TUNER SET menu, see section “Menu settingsoverleaf).  
MW, LW, AM or AMT are only available in respective tuner regions.  
2
3
4
5
Only if CD is inserted or USB stick is connected (Miami 100 USB only) or external audio source is connected.  
Only if automatic dimming is switched off (DIM setting in the VARIOUS menu, see section “Menu settingsoverleaf).  
Only if priority for traffic announcement is switched on (TRAF setting in the TUNER SET menu, see section “Menu settingsoverleaf).  
Only Miami 100 USB.  
1
2
3
Miami 100 USB only.  
MP3/WMA only.  
Each track is played for 10 seconds.  
1
Only in tuner regions USA and S AMERICA.  
Each station is played for 10 seconds.  
2

AOC Car Satellite TV System T2442e User Manual
Bunn Beverage Dispenser ICD 3S User Manual
Canon Camera Accessories SBOEX User Manual
Casio Graphing Calculator FXCG10LIH User Manual
DeLonghi DFP690 Series User Manual
gohastings com Hastings Entertainment Cable Box DAVC 5 User Manual
Honda Automobiles Music Link CR V _ SE User Manual
Jensen AWM970 User Manual
JVC GR DVL505 User Manual
JVC GR FX53 User Manual