Blaupunkt MEMPHIS MP66 7 646 521 310 User Manual

Radio CD SD USB MP3 WMA  
Memphis MP66  
7 646 520 310  
7 646 521 310  
Operating and installation instructions  
2
Contents  
Selecting a menu item in the  
settings menu...............................83  
Changing and saving a setting......84  
Exiting a menu item......................84  
Contents  
About these instructions................70  
For your safety................................70  
Scope of delivery............................71  
Warranty .........................................71  
Operating the tuner........................85  
Searching for stations......................85  
Manually searching for stations....85  
Automatically searching for  
stations ........................................86  
Storing stations ...............................87  
Device Overview.............................72  
Controls...........................................72  
Listening to stored stations.............87  
Placing the device in operation......73  
Scanning all receivable stations ......87  
Set the device to the region  
Europe, USA or Thailand ..............88  
Detaching/attaching the control  
panel................................................73  
Switching the device on/off.............74  
Changing the tuner settings  
General functions ...........................74  
Inserting a CD..................................74  
Inserting an MMC/SD card ..............75  
Connecting the USB medium...........75  
Adjusting the volume .......................76  
Muting the device ............................76  
Operation with telephone................76  
Selecting an audio source ...............77  
The tuner display..........................78  
The audio CD display ...................78  
The CD changer display ...............79  
The MP3 display...........................79  
("Tuner" menu) ................................89  
Changing the waveband (Band)...89  
Toggle between mono and  
stereo operation (Mono)..............90  
Switching the display of radio  
text on/off (Radio Text)................90  
Allowing alternative frequencies  
(RDS) ...........................................90  
Searching FM stations  
automatically and storing them  
in the FMT memory bank  
(Travelstore).................................90  
Activating/deactivating improved  
reception (Hicut)..........................91  
Allowing/preventing automatic  
changing to other regional  
Overview of the operation..............80  
Overview of the buttons ..................80  
Overview of the functions MIX,  
RPT, and TA......................................81  
Switching random track play  
on/off (MIX) .................................81  
Switching Repeat title on/off  
(RPT)............................................82  
Scanning titles (Scan)..................82  
programmes (Regional)................91  
Changing the seek tuning  
sensitivity (Sensitivity).................92  
Restricting station seek tuning  
to certain programme contents  
(Program Type) ............................92  
Buttons for menu operation ............82  
Example of a menu operation..........83  
Calling up a menu ........................83  
67  
Contents  
Traffic announcements (TA) ...........93  
Receiving traffic announcements.....93  
Skipping a traffic announcement.....93  
Permanently switching the priority  
of traffic announcements on/off......93  
Calling up a user-defined  
equalizer setting  
(User Equalizer) .........................106  
Creating/changing a user-  
defined equalizer setting  
(Adjust)......................................107  
Which equalizer setting is the  
correct one?...............................109  
Selecting a sound preset  
Operating the integrated  
CD player.........................................95  
What features do MP3 or  
WMA CDs have to have?...............95  
Functions of the integrated CD  
player if an audio CD is inserted..96  
Switching the CD text display  
on/off (TXT) .................................97  
Switching the scrolling text  
(Presets) ....................................110  
Setting the speed-dependent  
volume increase (Auto Sound)...110  
Setting the bass increase  
(X-Bass)......................................110  
Switching off the equalizer ........110  
Configuring the preamplifier  
output for the subwoofer  
(Subout).....................................111  
Changing display settings  
(Display Settings)..........................112  
Changing the brightness of the  
display for day/night  
for CD text on/off (SCL) ..............97  
Operating the MP3/WMA player....98  
Showing all the information of  
the current title (ALL)..................99  
Switching scrolling text on/off  
(SCL)............................................99  
Selecting the title information  
to be displayed (INF)....................99  
Selecting a title from a list  
(Browser mode/playlist) ............100  
(Brightness) ...............................112  
Activating/deactivating the  
screen saver (Screen Saver) ......112  
Switching the welcome text  
on/off (Turn On Text).................112  
Changing images and animations  
(SD Browser/USB Browser).......113  
Adjusting the display viewing  
angle (Angle)..............................114  
Operating the optional CD  
changer .........................................102  
Changing the name of a CD  
in the magazine of the CD  
changer (CDN) ...........................103  
Changing basic settings in the  
settings menu ...............................104  
Adjusting sound and balance  
(Audio Settings).............................105  
Changing treble or bass  
(Treble/Bass) .............................105  
Changing the volume  
distribution (Balance/Fader)......105  
Changing the equalizer setting  
(Digital Equalizer) ......................106  
Changing volume presettings  
(Volume Settings)..........................115  
Changing the volume presetting  
of traffic announcements  
(Traffic Volume)..........................115  
Changing the volume presetting  
of the telephone  
(Phone Volume) .........................115  
68  
Contents  
Changing the volume presetting  
of the signal tone  
(Beep Volume) ...........................116  
Changing the presetting of the  
power-on volume (On Volume)...116  
Restoring the volume at  
Changing the scan time  
(Scan Time)................................121  
Displaying the serial number  
(Serial Number) .........................122  
Error table.....................................122  
Specifications ...............................123  
Glossary ........................................124  
Index .............................................127  
switch-on (Last Volume) ............116  
Changing clock settings (Clock  
Settings)........................................117  
Setting the time (Time Setting) .117  
Switching the time display  
on/off with switched-off device  
(Off Clock) .................................117  
Configuring audio inputs  
(Aux Settings)................................118  
Switching the RDS  
synchronisation of the clock  
on/off (Auto Sync) .....................118  
Switching the 24-hour time  
display on/off (24 h Mode) ........118  
Activating/deactivating audio  
inputs (Auxiliary 1/2) .................119  
Renaming audio inputs  
(Edit Auxiliary 1/2).....................119  
Changing special settings  
(Various Settings)..........................120  
Changing the welcome text  
(Turn On Text)............................120  
Switching the internal amplifier  
on/off (Internal Amp).................121  
Resetting the device to factory  
settings (Norm Set)....................121  
Blaupunkt stands for technical know-how in mobile radio reception,  
for precise navigation systems and first-class sound. The blue dot  
made its debut in 1923 as a seal of quality that was assigned after  
rigourous functional – and it still applies today. At that time as well  
as today, the blue dot identifies products of extraordinary quality.  
69  
About these instructions  
If you are installing device your-  
self  
You may only install the device  
yourself if you are experienced in  
installing car sound systems and  
are very familiar with the electri-  
cal system of the vehicle.  
About these instruc-  
tions  
Please read these instructions  
and, in particular, the following  
chapter, "For your safety", before  
using the device! Please also ob-  
serve the following instructions:  
Observe the following!  
CD Changer, if available  
Danger of injuries!  
Remote Control, if available  
Do not open or modi-  
fy the device! The de-  
vice contains a Class 1 laser that  
emits invisible laser radiation  
which can cause injuries to your  
eyes. The warranty is void if the  
device has been opened.  
For your safety  
The device was manufactured  
according to the state of the art  
and established safety guidelines.  
Even so, dangers may occur if you  
do not observe these safety infor-  
mation:  
Danger of accidents!  
Operate the device only if  
traffic situation permits it!  
Read these instructions care-  
fully and completely before  
using the device.  
Danger of hearing  
damage!  
Keep the instructions at a loca-  
tion so that they are always ac-  
cessible to all users.  
Always listen at moder-  
ate volume so that you can always  
hear acoustic warning signals!  
This will also help to protect your  
hearing. The device briefly switch-  
es to mute, e.g. while the CD  
changer changes the CD or if you  
are switching the audio source.  
Do not increase the volume dur-  
ing this mute phase  
Always pass on the device to  
third parties together with  
these instructions.  
Use as directed  
The device is designed for opera-  
tion in a vehicle with 12 V vehicle  
system voltage and must be in-  
stalled in a DIN slot.  
70  
Scope of delivery  
Danger to the device!  
2 Disassembly bar  
Do not insert any mini  
CDs (8 cm diameter) and  
shape CDs since they destroy the  
drive!  
1 Guide pin  
1 USB connecting cable  
Note:  
Remote controls are available  
as optional equipment. You can  
find out from your Blaupunkt  
dealer or on the Internet at  
mote controls can be used with  
this device.  
Theft protection  
Carry the control panel with you  
in the supplied case whenever  
you leave the vehicle.  
Cleaning  
Clean the device with a dry or  
slightly moistened cloth. Do not  
use any solvents, cleaning agents  
or cleansers and no cockpit spray  
and care product for plastic ma-  
terials.  
Warranty  
We provide a manufacturer's war-  
ranty for products bought within  
the European Union. For devices  
purchased outside the European  
Union, the warranty terms issued  
by our respective responsible do-  
mestic agency are valid.  
Disposal of old unit  
(EU countries only)  
Do not dispose of your old  
The warranty terms can be called  
requested directly from:  
device in the household trash!  
Use the return and collection sys-  
tems available to dispose of the  
old device.  
Blaupunkt GmbH  
Hotline  
Robert-Bosch-Str. 200  
D-31139 Hildesheim  
Scope of delivery  
1 Memphis MP66  
1 Case for the control panel  
1 Operating instructions  
1 Support frame  
71  
Device Overview  
Device Overview  
Controls  
12 3 4 567 89  
:;<=  
B A  
@?  
>
6NEXT button  
1
button  
Tuner: Select memory bank  
(FM1, FM2, FM3, FMT)  
Settings menu: Go to the next  
menu page  
for detaching the control panel  
2TUNER button  
Selecting the tuner as audio  
source  
MP3/WMA: Switch between  
"PLAY", "BROWSER" and  
"PLAYLIST"  
Opening the "Tuner"  
3Rocker switch  
Tuner: Start the station seek  
tuning  
Settings menu: Change settings  
7to <Softkeys  
To select the function shown on  
the display next to the respective  
button  
4On/Off button  
Press short: Switch on/mute  
Press long: Switch off  
=
button  
to eject/insert a CD  
5Volume control  
>Display (see page 78 and 79)  
72  
Device Overview  
?MENU button  
Placing the device in  
operation  
to call up the settings menu  
@ESC button  
Settings menu: Confirm menu  
item and change to the display of  
the audio source  
Detaching/attaching the  
control panel  
You can detach the control panel  
to protect against theft.  
Scan/Travelstore: Cancel  
AOK button  
Press short: Confirm menu item  
and change to the next higher  
menu level  
CAUTION!  
Press long: Start scan/station  
seek tuning  
Danger of theft!  
The device is worthless to a thief  
without the control panel.  
BSRC button  
consecutively switching between  
the available audio sources  
Never keep the control pan-  
el in the vehicle, not even in a  
hidden place; instead, carry it  
with you in its case when you  
leave the vehicle!  
CCD drive  
C
CAUTION!  
Damage to the control  
panel!  
The control panel can be dam-  
aged or malfunction if the follow-  
ing is not observed:  
DMMC/SD card slot  
D
Never drop the control panel.  
Never expose the control pan-  
el to direct sunlight or another  
heat source.  
Transport it exclusively in the  
supplied case.  
73  
General functions  
Do not touch the contacts on  
To switch off the device:  
the rear side with your fingers.  
Press and hold the On/Off but-  
ton 4for approx. two sec-  
onds.  
Clean the contacts of the con-  
trol panel regularly using a soft  
cloth moistened with cleaning  
alcohol.  
In addition, the device is automat-  
ically switched off as soon as you  
switch of the vehicle ignition. If  
you switch on the ignition again,  
it also automatically switches on  
the device again.  
To detach the control panel:  
Press the  
button 1.  
The control panel opens to the  
front on the left. The device  
switches off automatically.  
General functions  
Detach the control panel.  
To attach the control panel:  
Inserting a CD  
Place the control panel in the  
slot with the right side first.  
CAUTION!  
Next, carefully push the left  
side to the back until the con-  
trol panel engages.  
Damage to CD drive from  
unsuitable CDs!  
Mini CDs (8 cm diameter) or  
shape CDs damage the drive!  
Switching the device  
on/off  
To switch on the device:  
Insert only circular CDs with  
a 12-cm diameter into the CD  
drive.  
Press the On/Off button 4.  
The device plays the audio  
source you previously listened  
to.  
To insert an MP3, WMA or audio  
CD, the device must be switched  
on.  
Press the  
button =.  
Note:  
If you switch on the device  
without first switching on the  
vehicle ignition, the device au-  
tomatically switches off after  
one hour to save the vehicle  
battery.  
74  
General functions  
The control panel opens. If a  
CD is in the drive, it is ejected.  
If you do not remove this CD, it  
is automatically pulled in again  
after approx. 10 seconds.  
Remove the control panel as  
described on page 9.  
Insert the MMC/SD card in the  
card slot Duntil it engages.  
The contacts of the card must  
point down and to the rear.  
Insert the CD with its print-  
ed side uppermost into the CD  
drive Cuntil you feel some re-  
sistance.  
Attach the control panel as de-  
scribed on page 9.  
This MMC/SD card can now be  
selected as audio source.  
The CD is automatically drawn  
in and the control panel clos-  
es. This CD can now be select-  
ed as audio source.  
To remove the MMC/SD card:  
Remove the control panel as  
described on page 9.  
Note:  
Push on the MMC/SD card un-  
As long as the CD is in the  
drive, the device stores track  
and playing time of the CD  
played last, and after calling up  
the audio source, the playback  
starts at the position where it  
was interrupted.  
til it disengages.  
Pull the MMC/SD card out of  
the card slot D.  
Connecting the USB  
medium  
To be able to connect a USB stick  
or a USB 2.0 hard disk, the sup-  
plied USB cable must be con-  
nected to the rear side of the de-  
vice before the installation as  
described in the installation in-  
structions. This cable can be rout-  
ed, for example, to the glove com-  
partment or a suitable place of  
the center console.  
Inserting an MMC/SD card  
Note:  
Blaupunkt cannot guarantee  
the correct functioning of all  
MMC/SD card available on the  
market and, for this reason,  
recommends the use of MMC/  
SD cards manufactured by  
"SanDisk" or "Panasonic". The  
cards must be formatted using  
the FAT16 or FAT32 file system  
and contain MP3 or WMA files.  
Note:  
Always switch off the device be-  
fore connecting or disconnecting  
the USB medium.  
75  
General functions  
The display shows "Phone call". To be able to select an external  
audio source, it must be connect-  
The currently playing audio  
ed and contain audio data.  
source is muted.  
Press the SRC button B re-  
During the telephone call, you  
peatedly until the display brief-  
change the volume of the tele-  
ly shows the desired audio  
source.  
phone call by means of the vol-  
ume control 5.  
Traffic announcements (TA) are  
not automatically shown.  
Selecting an audio source  
The device features the following  
audio sources:  
Tuner  
Integrated CD player (can play  
audio CDs as well as CDs with  
MP3 or WMA files)  
MMC/SD card with MP3 or  
WMA files  
In addition, the following external  
audio sources can be connected:  
either an optional CD changer  
or AUX 1  
AUX 2 (e.g. MiniDisc or exter-  
nal MP3 player)  
USB medium with MP3 or  
WMA files  
77  
General functions  
The tuner display  
The audio CD display  
F
A
F
A
B C  
D
E
B
C
D
E
TMC  
FMT  
TMC  
CD  
1
2
3
4
5
6
16:13  
16:13  
02:19  
Mix CD  
92,8  
MHz  
Radio Sun  
TRACK 06  
SONG: Bob Marley - No woman no cry  
Madonna in concert tonight  
F
J
H
G
F
J
H
G
A TMC symbol¹)  
A TMC symbol¹)  
B TA symbol  
B TA symbol  
see page 93  
see page 93  
C Main line  
C Main line  
RDS station name or frequency  
Track number  
D Clock  
D Clock  
E Level indicator  
E Level indicator  
Memory bank (FMT, FM1 to FM3)  
Audio source (CD)  
F Memory location for radio sta-  
tions which can be selected  
using the six softkeys 7to <  
F Functions which can be  
selected using the softkeys  
7to <  
G Info line 1  
G Info line 1  
Frequency of the station  
Playing time  
H Info line 2  
H Info line 2  
Frequency unit (MHz or kHz)  
Activated audio functions  
I Info line 3  
I Info line 3  
Radio text, if supported by the  
station  
CD text  
¹) The TMC symbol appears only if you connect an external navigation system  
and it starts searching for TMC stations.  
78  
General functions  
The CD changer display  
The MP3 display²)  
A
A
B
C
D
E
F
B C  
D
E
F
TMC  
CDC  
TMC  
MP3  
16:13  
16:13  
02:19  
Mix All  
02:19  
Mix All  
TRACK 05  
Bob Marley  
SONG: Bob Marley - No woman no cry  
DISC 01 ALICIAK  
J
H
G
F
J
H
G
F
A TMC symbol¹)  
A TMC symbol¹)  
B TA symbol  
B TA symbol  
see page 93  
see page 93  
C Main line  
C Main line  
Track number  
ID3 or file name  
D Clock  
D Clock  
E Level indicator  
E Level indicator  
Audio source (CDC)  
Audio source (MP3, MMC, USB)  
F Functions which can be select- F Functions which can be  
ed using the softkeys 7to <  
selected using the six softkeys  
7to <  
G Info line 1  
G Info line 1  
Playing time  
Playing time  
H Info line 2  
H Info line 2  
Activated audio functions  
Activated audio functions  
I Info line 3  
I Info line 3  
CD text or CD name  
Title information (e.g. ID3 or file  
names)  
²) The MP3 display appears of a CD, SD/MMC card or USB medium with MP3 or  
WMA files is inserted and selected as audio source. The corresponding MP3  
medium is displayed on the level indicator E.  
79  
Overview of the operation  
Overview of the operation  
This chapter first presents the buttons on the device.  
It is followed by a description of the audio functions MIX, REPEAT, TA  
and SCAN since their operation is identical for all audio sources.  
The operation of the device menus is described starting on page 82.  
Overview of the buttons  
Many basic functions during the playback of music, such as forwarding  
and reversing music, are performed using the rocker switch 3(using  
the four functions , , , and ), the OK button Aor the six softkeys  
7to <.  
Note:  
These functions are not shown on the display!  
The following table shows the functions that can be performed by  
these buttons.  
Selectable audio sources  
What do you want to do?  
MP3/  
WMA  
Tuner  
CD  
CDC  
AUX  
Forward  
Hold pressed  
Hold pressed  
Press short  
Reverse  
Title forward  
Title reverse  
Previous CD/folder  
Next CD/folder  
Press short  
Press short  
Press short  
Scan track/station  
(see also page 82)  
Press OK for 2 s  
Play radio station  
Store radio station  
Press short  
Press for 2 s  
80  
Overview of the operation  
Overview of the functions MIX, RPT, and TA  
The display of the active audio source can show up to six functions F  
at the left and right edge of the display which you always operate us-  
ing the same six softkeys 7to <independent of the audio source.  
The different settings of a function are selected by repeatedly pressing  
the same softkey.  
The following table shows which settings are available for the func-  
tions MIX, REPEAT, and TA.  
Selectable audio sources  
Softkey next to the  
USB/SD/  
MMC  
audio function  
Tuner  
CD  
MP3 CD  
CDC  
AUX  
MEDIUM  
OFF  
OFF  
OFF  
CD  
MIX (random track play)  
(see also page 81)  
ALL  
CD  
FOLDER CD  
OFF FOLDER  
OFF  
OFF  
OFF  
OFF  
RPT (repeat mode)  
(see also page 82)  
DIR TRACK DIR TRACK FOLDER CD  
TRACK  
OFF  
ON  
TA (traffic announcement)  
(see also page 93)  
Switching random track play  
on/off (MIX)  
CD changer are played in  
random order.  
Press the softkey 7  
"MIX FOLDER": Up to 99 MP3  
or WMA titles in the current  
folder are played in random  
order.  
(next to "MIX").  
The random track mode is  
briefly displayed.  
"MIX MEDIUM": All MP3 or  
WMA titles on the current  
data carrier (CD, MMC/SD  
card or USB medium) are  
played in random order.  
"MIX CD": All tracks on the  
current audio CD are played  
in random order.  
"MIX ALL": All tracks on all  
CDs in the magazine of the  
81  
Overview of the operation  
"MIX OFF": The random track  
play is switched off. All ti-  
The selected repeat mode is dis-  
played on info line 2 H and indi-  
tles are played in the order in cated by "RPT" at the side of the  
which they are found on the  
data carrier.  
display.  
Scanning titles (Scan)  
If you switched on random track  
play, the selected random track  
play mode is displayed on info  
line 2 H and indicated by "MIX"  
at the side of the display.  
You can scan all the titles of a  
data carrier. The scan time is  
selected in the settings menu  
("Scan Time" menu item, see  
page 120 and 121).  
Switching Repeat title on/off  
(RPT)  
Press and hold the OK button  
Afor approx. two seconds.  
Press the softkey 8  
All titles are scanned. The dis-  
play shows "SCAN" and the dis-  
play of the active audio source.  
(next to "RPT").  
The repeat mode is briefly dis-  
played.  
To cancel the scan:  
"REPEAT TRACK": The cur-  
rent track is repeated until  
you quit repeat.  
Press the OK button A.  
The playback of the current ti-  
tle is continued.  
"REPEAT DIR": All titles in the  
current folder are repeated  
until you quit repeat.  
Buttons for menu  
operation  
"REPEAT CD": All tracks on  
the CD are repeated until you The device features menus which  
quit repeat.  
allow you to change the preset-  
tings or make a selection. The dis-  
play shows up to six menu items.  
Each menu item is assigned to  
one of the six softkeys 7to <.  
"REPEAT OFF": The repeat  
mode is switched off. How-  
ever, the playback does not  
stop with the last track. After  
the last title in the last fold-  
er, the playback is continued  
with the first title in the first  
folder.  
The following buttons are re-  
quired to operate the menus:  
82  
Overview of the operation  
The MENU button ?calls up  
Example of a menu  
the settings menu at any time.  
operation  
If a menu consists of sever-  
al pages, you can consecutive-  
ly scroll them using the NEXT  
button 6.  
The following example from the  
settings menu (Changing the dis-  
play brightness) shows how to  
operate the menus in general.  
If "Tuner" is selected as the au-  
dio source, the TUNER button  
2calls up the "Tuner" menu.  
Calling up a menu  
Press the MENU button ?.  
The softkeys 7to <are used  
to select the menu items that  
are shown on the display next  
to the corresponding button.  
The settings menu is displayed.  
Menu  
Audio Settings  
Display Settings  
Volume Settings  
Clock Settings  
Aux Settings  
Various Settings  
In some menus, the rocker  
switch 3is used to change the  
setting of a menu item.  
Selecting a menu item in the  
settings menu  
Press the softkey 8(next to  
This setting is immediate-  
ly effective and automatically  
stored.  
"Display Settings").  
You confirm the setting with  
the OK button Aand go back  
one higher menu level.  
The "Display" menu appears.  
Display  
You also confirm the displayed  
setting with the ESC button @,  
but you are leaving the menu  
and return to the display of the  
active audio source.  
Brightness  
Screen Saver  
Turn On Text  
SD Browser  
USB Browser  
Angle  
Press the softkey 7(next to  
"Brightness").  
If you do not press any button,  
the display of the active audio  
source automatically appears  
after approx. 16 seconds.  
The current settings for dis-  
play brightness for "Night" and  
"Day" appear on the "Display"  
menu. The "Night" menu item is  
highlighted.  
83  
Overview of the operation  
Display  
Night 08 Day 16  
Since you can adjust the display  
brightness separately for night  
and day, you must switch be-  
tween the menu items "Night"  
and "Day".  
For this purpose, press the  
rocker switch 3for or until  
the desired menu item is high-  
lighted.  
Changing and saving a setting  
To change the display brightness:  
On the rocker switch 3, press  
on or .  
The setting takes effect imme-  
diately (the display becomes  
brighter or darker). The setting  
is saved.  
If you do not press another  
button, the display of the ac-  
tive audio source automatical-  
ly appears after approx. 16 sec-  
onds.  
Exiting a menu item  
Press the OK button Ato go  
up one menu level.  
Or press the ESC button @  
to exit the menu and return to  
the display of the active audio  
source.  
84  
Operating the tuner  
Operating the tuner  
After selecting "Tuner" as the audio source, the tuner display appears  
(see page 78). The playback starts immediately with the previously  
played station if the vehicle is within the reception area of this station.  
1
2
3
Radio Kiss  
Radio Sun  
93.4  
94.6  
96.2  
97.7  
4
5
6
1
2
3
4
5
6
Radio Kiss  
Radio Sun  
93.4  
94.6  
96.2  
97.7  
SRC  
FMT  
1
2
3
Radio Kiss  
Radio Sun  
93.4  
94.6  
96.2  
97.7  
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
Radio Kiss  
Radio Sun  
93.4  
94.6  
96.2  
97.7  
16:13  
92,8  
MHz  
RADIO SUN  
1
2
3
4
5
6
1
2
3
4
5
6
Radio Kiss  
Radio Sun  
93.4  
Radio Kiss  
Radio Sun  
93.4  
94.6  
96.2  
97.7  
94.6  
96.2  
97.7  
Note:  
To automatically search for  
FM stations and store them in  
the FMT memory bank (Travel-  
store), see page 90.  
Selecting the memory  
bank  
The device features four memo-  
ry banks (FM1, FM2, FM3, and  
FMT). You can store or call up six  
stations at every memory bank.  
Manually searching for stations  
To select the memory bank:  
While the tuner display ap-  
pears, press on or on the  
rocker switch 3.  
Press the NEXT button 6  
repeatedly until the desired  
memory bank appears on the  
level display E of the tuner  
display.  
The response of the tuner  
depends upon the set-  
tings in the menus "RDS"  
(see page 90) and "Program  
Type" (see page 92).  
Searching for stations  
You can search for stations manu-  
ally or automatically.  
If you selected a specific pro-  
gram type (PTY, e.g. news,  
85  
Operating the tuner  
Automatically searching for  
stations  
While the tuner display ap-  
pears, press on or on the  
rocker switch 3.  
sports, classic, etc.) in the  
"Program Type" menu, the  
tuner automatically searches  
the next station broadcast-  
ing this program type in the  
selected direction. For this  
purpose, the station must  
be broadcasting the corre-  
sponding PTY identification  
as RDS service.  
The tuner searches for the next  
station in the current wave-  
band in the selected direction.  
The settings in the menus  
"Sensitivity" (see page 92) and  
"Program Type" (see page 92)  
are incorporated.  
If you activated the automat-  
ic change to alternative fre-  
quencies in the "RDS" menu,  
the tuner searches for the  
same station on a different  
frequency.  
As soon as a station is located,  
the seek tuning stops and the lo-  
cated station is played. The sta-  
tion name appears on the display  
after a few seconds if the station  
provides this RDS information.  
If you selected the "PTY OFF"  
option in the "PROG TYP"  
menu and deactivated the  
automatic change to alterna-  
tive frequencies in the "RDS"  
menu, you can manually ad-  
just the tuner in increments  
of 100 kHz.  
You can now store this station  
(see the next section) or restart  
the automatic station seek tuning.  
Note:  
If you press and hold or on  
the rocker switch 3, the auto-  
matically seek tuning skips the  
stations found until you release  
the rocker switch again.  
As soon as a station has been lo-  
cated, it is played. The station  
name appears on the display after  
a few seconds if the station pro-  
vides this RDS information.  
You can now store this station  
(see the next section) or restart  
the manual station seek tuning.  
86  
Operating the tuner  
station is played back provided  
that it can be received at the  
current vehicle position.  
Storing stations  
After locating a station, you can  
store it as follows:  
Press the OK button Aor the  
ESC button @or wait for  
16 seconds.  
Select the desired memory  
bank (see page 85).  
Press the softkey for approx.  
two seconds to which you  
want to assign the station.  
The tuner display shows sta-  
tion name, frequency and ra-  
dio text of this station, provid-  
ed that the station broadcasts  
RDS information.  
In addition, the memory loca-  
tion of the radio station F is  
highlighted.  
The station is stored. A signal  
tone confirms that the station  
has been stored.  
The display briefly shows the  
assignment of the six memory  
locations of the current memo-  
ry bank. The current station is  
highlighted.  
Scanning all receivable  
stations  
Note:  
Select the waveband (FM, MW,  
LW) whose receivable stations  
you want to scan (see page 89).  
To automatically search for  
FM stations and store them in  
the FMT memory bank (Travel-  
store), see page 90.  
Press and hold the OK button  
Afor approx. two seconds.  
The tuner searches for stations  
in the current waveband. The  
display shows "SCAN" every  
two seconds.  
Listening to stored  
stations  
Select the desired memory  
bank (see page 85).  
As soon as the tuner has locat-  
ed a station, it is played and  
the station name or the station  
frequency appears on the dis-  
play. The scan time can be set  
as described on page 120 and  
121 under "Scan Time".  
Briefly press the softkey which  
is assigned to the station you  
want to set up.  
The display may briefly show  
the assignment of the six mem-  
ory locations of the current  
memory bank. The current sta-  
tion is highlighted. The desired  
After the frequency band has  
been completely searched  
87  
Operating the tuner  
once, the search stops and the  
station located last is played  
back.  
You can do the following at any  
time:  
store the currently scanned  
station (see page 87),  
cancel the scan by briefly press-  
ing the OK button A.  
Set the device to the region  
Europe, USA or Thailand  
The device is factory set to the  
frequency ranges and station  
technologies of the region in  
which it was purchased. If this  
setting is not correct, you can ad-  
just the device as follows to the  
different frequency ranges and  
station technologies of Europe,  
the United States or Thailand.  
Switch off the device.  
Hold the two softkeys 9and  
<pressed while switching on  
the radio.  
The "Area" menu opens.  
Press the softkey next to the  
region in which you are using  
the device.  
Press the OK button A.  
88  
Operating the tuner  
Changing the tuner settings ("Tuner" menu)  
The "Tuner" menu allows you to change the basic settings of the tuner.  
To open the "Tuner" menu:  
Press the TUNER button 2.  
The "Tuner" menu appears.  
The "Tuner" menu consists of two pages which can be toggled with the  
NEXT button 6.  
TUNER  
Band  
Tuner  
Radio Text  
FM  
LW  
Traffic  
Band  
MW  
RDS  
Mono  
Travel Store  
Travel Store  
NEXT  
NEXT  
NEXT  
NEXT  
NEXT  
NEXT  
PTY  
Tuner  
0...2  
1...6  
Hicut  
Regional  
Sensitivity  
1
6
Program Type  
PTY OFF  
News  
Affairs  
Info  
Sport  
Educate  
Changing the waveband (Band)  
The tuner can receive FM, AM,  
: This waveband is not se-  
lected.  
and LW. To switch between these  
wavebands:  
You can now do the following in  
this waveband:  
In the "Tuner" menu, select the  
Searching stations  
(see page 85)  
"Band" menu item.  
The "Band" menu appears.  
Storing stations (see page 87)  
Select the desired band.  
Calling up stored stations  
(see page 87)  
: This waveband is select-  
ed. The previously played  
station of this waveband is  
played back.  
89  
Operating the tuner  
Toggle between mono and stereo Allowing alternative frequencies  
operation (Mono)  
(RDS)  
If you selected the "FM" wave-  
band, you can toggle between  
mono and stereo operation.  
The device can automatically  
switch to an alternative frequency  
(AF) of the same station if the re-  
ception becomes poor.  
Press the softkey  
9
in the  
"Tuner" menu (next to "Mono").  
Press the softkey ;in the  
"Tuner" menu (next to "RDS").  
: The mono operation is  
activated. Weak, noisy sta-  
tions are played back more  
clearly.  
: The device automatical-  
ly adjusts the best receivable  
frequency of the station, pro-  
vided that the station sup-  
ports the "AF" RDS function.  
: The stereo operation is  
activated. You are listening in  
stereo if the station broad-  
casts in stereo.  
: The device does not  
change the frequency.  
Note:  
Searching FM stations automat-  
ically and storing them in the  
FMT memory bank (Travelstore)  
You can automatically store the  
six FM stations offering the  
strongest reception in the region  
in the FMT memory bank.  
If you switch on the device, this  
setting is automatically set to  
stereo operation.  
Switching the display of radio  
text on/off (Radio Text)  
Press the softkey <in the  
"Tuner" menu (next to "Radio  
Text").  
Press the softkey :in the  
"Tuner" menu (next to "Travel-  
store").  
: The radio text display is  
switched on. Radio text is  
displayed on info line 3 I of  
the tuner display, provided  
that the station broadcasts  
radio text.  
"Travelstore" appears on the  
display. The tuner automatical-  
ly searches for the six strong-  
est FM stations and stores  
them in the FMT memory bank.  
After the storing is completed,  
the radio plays the station at  
memory location 1 of the FMT  
level.  
: The radio text display is  
switched off.  
90  
Operating the tuner  
Allowing/preventing automatic  
changing to other regional pro-  
grammes (Regional)  
Stations that were previous-  
ly stored in the FMT memory  
bank are automatically deleted.  
Some stations divide their pro-  
grammes into regional pro-  
grammes with different contents  
at certain times. You can use the  
Regional function to prevent or  
allow the device from switching  
to alternative frequencies that  
are transmitting a different pro-  
gramme content.  
Activating/deactivating im-  
proved reception (Hicut)  
The Hicut function improves re-  
ception during poor radio recep-  
tion (for FM only).  
Change to the second page of  
the "Tuner" menu by pressing  
the NEXT button 6.  
Change to the second page of  
the "Tuner" menu by pressing  
the NEXT button 6.  
Press the softkey 7in the  
"Tuner" menu (next to "Hicut")  
several times.  
Press the softkey 8in the  
"Tuner" menu (next to "Region-  
al").  
"1": The Hicut function is  
switched on and has a low  
response sensitivity. If the re-  
ception is very poor, the in-  
terference level is automati-  
cally decreased.  
: The Regional function is  
switched on. The tuner does  
not even switch to other  
regional programmes if the  
reception quality becomes  
poor.  
"2": The Hicut function is  
switched on and has a high  
response sensitivity. If the re-  
ception is poor, the interfer-  
ence level is automatically  
decreased.  
: The Regional function  
is switched off. The tuner  
switches to other regional  
programmes if the reception  
of the current programme is  
too poor.  
"0": The Hicut function is  
switched off.  
91  
Operating the tuner  
Changing the seek tuning sensi-  
tivity (Sensitivity)  
Scroll through the pages of  
the programme types with the  
NEXT button 6.  
The seek tuning sensitivity deter-  
mines whether the automatic  
station seek tuning locates only  
strong stations or also weaker  
stations, which may be degraded  
by a high noise level.  
Press the softkey next to the  
desired programme type.  
Next, start a station seek tun-  
ing (see page 85).  
Change to the second page of  
the "Tuner" menu by pressing  
the NEXT button 6.  
Press the softkey 9in the  
"Tuner" menu (next to "Sensi-  
tivity") several times.  
The seek tuning sensitivity can  
be adjusted in six increments.  
"1": Low seek tuning sensitiv-  
ity. During a station seek tun-  
ing (see page 85), only local  
strong stations are found.  
"6": High seek tuning sensi-  
tivity. Poor, remote stations  
are also found.  
Restricting station seek tuning  
to certain programme contents  
(Program Type)  
Change to the second page of  
the "Tuner" menu by pressing  
the NEXT button 6.  
Press the softkey <in the  
"Tuner" menu (next to "Pro-  
gram Type").  
92  
Traffic announcements  
A traffic information station  
must be set or it must belong  
to the same broadcasting net-  
work as the current station.  
Traffic announcements  
(TA)  
The device uses the RDS servic-  
es TA and EON to play traffic an-  
nouncements even if you are cur-  
rently listening to another audio  
source. If you did not define a  
traffic information station, the de-  
vice can automatically switch to  
a traffic information station of  
the same broadcasting network  
for the duration of a traffic an-  
nouncement.  
Skipping a traffic  
announcement  
To cancel a traffic announcement  
without switching off the priority  
of traffic announcements:  
Press the softkey <(next to  
"TA EXIT").  
The current traffic announce-  
ment is cancelled. The previ-  
ously active audio source is  
played again and the corre-  
sponding display appears. If a  
traffic announcement is broad-  
cast again, the device automat-  
ically switches it through again.  
Receiving traffic  
announcements  
As soon as the device receives a  
traffic announcement:  
The traffic announcement is  
switched through using the vol-  
ume defined in the settings  
menu (see page 115),  
Permanently switching  
the priority of traffic  
announcements on/off  
The TA symbol B appears on the  
display if the priority of traffic an-  
nouncements is switched on and  
a traffic information station is set.  
The traffic information display  
appears for the duration of the  
traffic announcement.  
Traffic  
TA OFF  
TA EXIT  
Radio Sun Info  
You have three options to switch  
the priority of traffic announce-  
ments on or off:  
For the device to switch through  
traffic announcements:  
The priority of traffic an-  
nouncements must be  
switched on (see page 93),  
93  
Traffic announcements  
First option (traffic information  
display)  
Press the softkey 7(next to  
"Traffic").  
Press the softkey 7(next to  
"TA OFF") during the traffic  
announcement.  
: Traffic announcements  
are automatically switched  
through.  
The current traffic announce-  
ment is cancelled. The previ-  
ously active audio source is  
played again and the corre-  
sponding display appears. If a  
traffic announcement is broad-  
cast again, the device does not  
automatically switch it through.  
: Traffic announcements  
are not switched through.  
Second option (TA on the display  
of the audio source)  
Ensure that the display of the  
audio source is shown.  
Press the softkey 9  
(next to "TA").  
The status is briefly displayed.  
"Traffic Info On": Traffic an-  
nouncements are automati-  
cally switched through.  
"Traffic Info Off": Traffic  
announcements are not  
switched through.  
Third option ("Traffic" in the  
"Tuner" menu)  
Press the TUNER button 2.  
The "Tuner" menu appears.  
94  
Operating the integrated CD player  
Bit rate:  
Operating the integrat-  
ed CD player  
MP3: max. 320 kbit/s  
WMA: max. 768 kbit/s  
File extension: Must be ".MP3"  
or ".WMA"  
The device can play the following  
CD formats:  
ID3 tags: Version 1 or 2  
CD audio (some CDs with copy  
protection cannot be played)  
Max. 252 folders per CD with  
max. 999 MP3 files per fold-  
er (fewer in case of long file  
names: approx. 700 at 20 char-  
acters per file name)  
CD-R or CD-RW with MP3 or  
WMA files (without DRM copy  
protection only)  
Note:  
File names may not contain  
an umlaut or special charac-  
ter and may not be longer than  
32 characters.  
The quality of self-burnt CDs  
fluctuates due to different CD  
blanks, CD burner software,  
and burn speeds. For this rea-  
son, it is possible that the  
device cannot play some self-  
burnt CDs.  
WMA files with DRM (Digit-  
al Rights Management, copy  
protection/playback restric-  
tion) cannot be played! WMA  
files with DRM offered by mu-  
sic providers for download via  
the Internet cannot be played  
by the device. WMA files which  
you create yourself, e.g. from  
CD audio files, can be played.  
If you cannot play a CD-R/CD-RW:  
Use blanks from a different  
manufacturer or a different  
colour,  
Burn CD-Rs at a lower speed.  
What features do MP3 or WMA  
CDs have to have?  
The device can only play and dis-  
play MP3 or WMA CDs with the  
following features:  
The CD-ROM may contain only  
MP3 or only WMA files as well  
as folders, but no other files  
(including no CD audio files).  
CD format: ISO 9660 (Level 1  
or 2) or Joliet  
95  
Operating the integrated CD player  
Functions of the integrated CD player if an audio CD is inserted  
After inserting an audio CD (see page 74) and selecting "CD" as the  
audio source for the first time (see page 77), "CD Reading" appears  
on the display. Next, the audio CD display appears (see also page 78).  
The playback starts  
.
SRC  
Mix Off  
Mix CD  
CD Text On  
Scroll On  
CD Text Off  
CD  
16:13  
Repeat  
Off  
Repeat  
Track  
02:19  
Scroll Off  
TRACK 06  
Mix CD  
SONG: Bob Marley - No woman no cry  
Traffic Info Off  
Traffic Info On  
Menu item  
Abbr. Softkey Setting option  
See also  
Random track play  
MIX  
RPT  
TA  
Switch-on (Mix CD)  
Switch-off (Mix Off)  
Page 81  
7
8
9
<
;
Repeat title  
Switch-on (Repeat Track)  
Switch-off (Repeat Off)  
Page 82  
Page 93  
Page 97  
Page 97  
Priority for traffic  
announcements  
Switch-on (Traffic Info On)  
Switch-off (Traffic Info Off)  
Display CD text  
TXT  
SCL  
Switch-on (CD Text On)  
Switch-off (CD Text Off)  
Scrolling text  
Switch-on (Scroll On)  
Switch-off (Scroll Off)  
96  
Operating the integrated CD player  
Switching the CD text display  
on/off (TXT)  
Some CDs support the display of  
text information about artist, al-  
bum, track, etc.  
"Scroll Off": CD text is not  
displayed as scrolling text. If  
the CD text does not fit on  
info line 3 I of the display, it  
appears incomplete.  
To switch the display of CD text  
on/off:  
Press the softkey <  
(next to "TXT").  
The CD text status is briefly  
displayed.  
"CD Text On": The CD text is  
displayed on info line 3 I.  
"CD Text Off": The CD text is  
not displayed.  
Switching the scrolling text for  
CD text on/off (SCL)  
The device can display CD text  
statically or as scrolling text  
(Scroll). To change the display of  
CD text:  
Press the softkey ;  
(next to "SCL").  
The CD text display status is  
briefly displayed.  
"Scroll On": CD text is dis-  
played as scrolling text, pro-  
vided that the CD supports  
CD text, the display of CD  
text is switched on (see the  
previous section), and the  
CD text does not fit on info  
line 3 I of the display.  
97  
Operating the MP3/WMA player  
Operating the MP3/WMA player  
After inserting a medium with MP3 or WMA files (CD, MMC/SD card,  
or USB medium) (see pages 74 and 75) and selecting them as audio  
source for the first time (see page 77), "CD/MMC/USB Reading" ap-  
pears on the display. Next, the MP3 display appears (see page 79).  
The playback starts.  
y
SRC  
MIX  
FOLDER  
ARTIST: Bob Marley SONG: No woman no cry  
Mix CD /  
MEDIUM  
Mix Off  
MMC  
16:13  
16:13  
USB  
MP3  
16:13  
Repeat  
Off  
Repeat  
DIR  
REPEAT  
Track  
02:19  
Scroll On  
Scroll Off  
Bob Marley  
Mix All  
y
FILE: Bob Marley - No woman no cry  
Traffic Info Off  
Traffic Info On  
Menu item  
Abbr.  
Softkey Setting option  
See  
Random track  
play  
MIX  
Playing files of the folder (Mix FOLDER) or  
data carrier (Mix CD or Mix MEDIUM) in  
random order  
Page  
81  
7
Switch-off (Mix Off)  
Repeat title  
RPT  
TA  
Repeating the current file (Repeat Track) or Page  
8
9
files of the folder (REPEAT DIR)  
82  
Switch-off (Repeat Off)  
Priority for  
traffic an-  
nouncements  
Switch-on (Traffic Info On)  
Switch-off (Traffic Info Off)  
Page  
93  
Showing infos  
ALL  
SCL  
All available information for the current title Page  
<
;
scrolls once on info line 3 I  
99  
Scrolling text  
Switch-on (Scroll On)  
Switch-off (Scroll Off)  
Page  
99  
Selecting info  
INF  
Switching between DIR, SONG, ARTIST,  
ALBUM, and FILE  
Page  
99  
:
98  
Operating the MP3/WMA player  
Showing all the information of  
the current title (ALL)  
Selecting the title information to  
be displayed (INF)  
To show all the available infor-  
mation about the current title  
(e.g. from ID3 tags) on the dis-  
play:  
The device can display the  
following title information on  
info line 3 I:  
Either information from embed-  
ded data or ID3 tags (artist,  
title, album, genre, year), if  
available  
Press the softkey <  
(next to "ALL").  
All available information for the  
current title scrolls once on  
info line 3 I.  
Or file and folder name.  
To select the title information to  
be displayed:  
Switching scrolling text on/off  
(SCL)  
The device can display the title  
information selected in the "INF"  
menu item (see next section),  
either statically or as scrolling text.  
Press the softkey :repeatedly  
(next to "INF").  
The type of information to be  
displayed is shown:  
"DIR": Name of the folder in  
which the currently playing  
file is located  
To toggle between static display  
and scrolling text:  
"SONG": Name of the cur-  
rent title  
Press the softkey ;  
(next to "SCL").  
"ARTIST": Name of artist  
"ALBUM": Name of album  
"FILE": File name of current  
title  
If the scrolling text display is  
switched on, the text scrolls  
without interruption from  
right to left on info line 3 I.  
If the scrolling text display is  
switched off, no more than  
the first 32 characters are  
displayed on the info line 3  
I.  
99  
Operating the MP3/WMA player  
Selecting a title from a list (Browser mode/playlist)  
During the MP3 or WMA playback, you can always switch between the  
following modes using the NEXT button 6:  
MP3 display (left part of the figure),  
Browser mode (center part of the figure),  
Playlist mode (right part of the figure).  
Note:  
The device can play playlists that were created with an MP3 manag-  
er, such as WinAmp or Microsoft Media Player. These playlists must  
be present in the format M3U, PLS or RMP and stored in the root  
directory of the data carrier!  
NEXT  
NEXT  
NEXT  
BROWSE  
BROWSE  
PL  
PL  
Bob Marley - No woman  
Bob Marley - Redemptio  
Bob Marley - I shot the S  
Bob Marley - Buffallo Sol  
list.m3u  
list2.m3u  
list3.m3u  
list4.m3u  
PL  
PL  
MP3  
16:13  
02:19  
OK  
OK  
Bob Marley  
SONG: Bob Marley - I shot the sherrif  
BROWSE  
BROWSE  
Rock  
Annie Lennox - Walking  
Eurythmics - Sweet Dream  
Jaffa - Elevator  
Ska  
Reggae  
Hip Hop  
NEXT  
The Police - Roxanne  
Note:  
The browser mode or the playlist  
shows:  
The files are not played in al-  
phabetical order, but in the or-  
der in which they were physi-  
cally stored on the data carrier.  
This order is also displayed in  
the browser mode.  
The currently playing file at the  
top,  
the next three files to be  
played below it,  
two arrowheads that are high-  
lighted if you can scroll in the  
corresponding direction.  
100  
Operating the MP3/WMA player  
In the browser mode and the  
playlist mode, you can select files  
or folders from the list as follows:  
On the rocker switch 3, press  
or to scroll up or down.  
On the rocker switch 3, press  
to change up to a higher-level  
folder.  
On the rocker switch 3, press  
or press the OK button Ato  
change up into a subfolder.  
On the rocker switch 3, press  
or press the OK button Ato  
play a selected file.  
101  
Operating the optional CD changer  
Operating the optional CD changer  
After inserting at least one CD in the CD changer magazine and select-  
ing "CDC" as the audio source for the first time (see page 77), "Mag-  
azine Scan" briefly appears on the display. The CD overview appears  
next. The playback starts.  
You can toggle between the CD overview (top part of the figure) and  
the CD changer display (center part of the figure) by using the NEXT  
button 6.  
CDC  
CDC  
16:13  
16:13  
SRC  
ALICIAK  
MADONNA  
BOBMARL  
DISC 04  
DISC 05  
Next  
DISC 06  
DISC 07  
DISC 08  
DISC 09  
DISC 10  
Previous  
NEXT  
NEXT  
CDC  
Edit CD Name  
Clear CD Name  
Clear ALL Names  
Mix Off  
MIX ALL  
Mix CD  
Press Key for more then 2 Sec  
CDC  
16:13  
Repeat  
Off  
Repeat  
CD  
Repeat  
Track  
02:19  
Track 05  
Mix All  
DISC 01 ALICIAK  
Traffic Info Off  
Traffic Info On  
Menu item  
Abbr. Softkey Setting option  
See  
Random  
track play  
MIX  
Playing all the titles of the CD (Mix CD) or  
the magazine (Mix ALL) in random order  
Page  
81  
7
Switch-off (Mix Off)  
Repeat title  
RPT  
Repeating the current title (Repeat Track) or  
the current CD (Repeat CD)  
Page  
82  
8
Switch-off (Repeat Off)  
Priority for  
traffic an-  
nouncements  
TA  
Switch-on (Traffic Info On)  
Switch-off (Traffic Info Off)  
Page  
93  
9
<
Editing CD  
names  
CDN  
Entering, changing, deleting names for CDs  
located in the changer magazine  
Page  
103  
102  
Operating the optional CD changer  
Selecting a CD from the CD  
magazine (CD overview)  
The CD overview shows:  
Changing the name of a CD in  
the magazine of the CD chang-  
er (CDN)  
either the CD number  
(e.g. "DISC 01")  
You can assign a name to eve-  
ry CD located in the CD changer.  
The name can have up to seven  
characters.  
or the name of the CD (you can  
enter it as described in the fol-  
lowing section)  
Select the CD to which you  
want to assign a name in the  
CD overview as described in  
the preceding section.  
or an empty position if the cor-  
responding position of the  
magazine is without a CD.  
Press the NEXT button 6to  
If necessary, press the NEXT  
button 6to display the CD  
overview.  
show the CD changer display.  
Press the softkey <  
(next to "CDN").  
Press the softkey located next  
to the number or next to the  
name of the desired CD.  
Press the softkey 7  
(next to "Edit CD Name").  
"Loading CD" appears brief-  
ly on the display. The playback  
starts next with the first track  
of the CD.  
The text input appears. The  
first character of the name is  
highlighted.  
On the rocker switch 3, re-  
peatedly press or to change  
the highlighted character.  
Note:  
If there are more than five  
CDs in the magazine of your  
CD changer, press softkey :,  
which is also located next to  
the menu items "Next" and  
"Previous", to toggle between  
the display of the first and last  
five CDs.  
On the rocker switch 3,  
press to change to the next  
character.  
Press the OK button Ato fin-  
ish the text input and to store  
the name entered.  
Note:  
To quit the text input without  
changing the name, press the  
ESC button @.  
103  
Changing basic settings in the settings menu  
To delete the name of the cur-  
rent CD:  
To delete the names of all the  
CDs located in the magazine of  
the CD changer:  
Press and hold the softkey <  
(next to "Clear CD Name") for  
longer than two seconds.  
Press and hold the softkey ;  
(next to "Clear All Names") for  
longer than two seconds.  
"Clearing" briefly appears on  
the display.  
"Clearing" briefly appears on  
the display.  
Changing basic settings in the settings menu  
The settings menu allows you to adjust basic device functions, such as  
sound, power-on volume or display brightness, to your specific needs.  
To open the settings menu:  
Press the MENU button ?. The settings menu appears.  
Audio  
+2  
Clock  
Auto Sync  
Treble  
Balance  
Fader  
0
0
0
Bass  
Time Setting  
Off Clock  
Digital Equaliser  
24 h Mode  
MENU  
Subout  
Display  
Menu  
Aux  
Brightness  
Screen Saver  
Turn On Text  
SD Browser  
USB Browser  
Angle  
Audio Settings  
Display Settings  
Volume Settings  
Clock Settings  
Aux Settings  
Various Settings  
Auxiliary 2  
Edit Auxiliary 2  
Auxiliary 1  
Edit Auxiliary 1  
Volume  
Various  
Traffic Volume 25  
Phone Volume 25  
Beep Volume 03  
On Volume 10  
Last Volume  
Turn On Text  
Internal Amp  
Norm Set  
Scan Time  
Serial Number  
104  
Changing basic settings in the settings menu  
Adjusting sound and balance (Audio Settings)  
The "Audio Settings" menu provides extensive possibilities for adjust-  
ing the sound to your specific needs.  
Press the MENU button ?. The settings menu appears.  
Press the softkey 7(next to "Audio Settings").  
The "Audio Settings" menu appears.  
Bass  
DEQ  
Treble  
Balance  
Fader  
+2  
+2  
Audio Settings  
7
7
7
7
Audio  
+2  
Treble  
Balance  
Fader  
+2  
0
0
Bass  
Digital Equaiizer  
Subout  
User Equalizer  
Presets  
Auto Sound  
0
X-Bass  
Off  
Subout  
Hz  
0
0
32  
Changing treble or bass  
(Treble/Bass)  
Changing the volume distribu-  
tion (Balance/Fader)  
Press the softkey 7(next to  
"Treble") or the softkey <  
(next to "Bass").  
The balance controls the volume  
distribution between left and  
right, the fader between front and  
rear.  
The corresponding sound con-  
trol is displayed.  
Press the softkey 8(next to  
"Balance") or softkey 9  
(next to "Fader").  
On the rocker switch 3,  
press or to increase treble  
or bass.  
The volume distribution is dis-  
played.  
On the rocker switch 3,  
press or to decrease treble  
or bass.  
On the rocker switch 3, press  
on the desired direction.  
The volume distribution chang-  
es. The display shows the new  
volume distribution.  
105  
Changing basic settings in the settings menu  
Changing the equalizer setting (Digital Equalizer)  
Your device features a digital 6-band equalizer. On the "Digital Equal-  
izer" menu, you can adjust the sound to your vehicle and your specific  
needs and eliminate problems, such as droning or poor voice compre-  
hension.  
Press the MENU button ?. The settings menu appears.  
Press the softkey 7(next to "Audio Settings"). The "Audio Settings"  
menu appears.  
Press the softkey ;(next to "Digital Equalizer").  
User EQ  
User EQ 1  
User EQ 2  
User EQ 3  
Adjust  
Digital Equalizer  
User EQ Off  
Presets  
X-BASS  
DEQ  
Vocal  
Disco  
Rock  
Jazz  
Classic  
P-EQ Off  
User Equalizer  
Presets  
Auto Sound  
4
X-Bass  
Off  
63 Hz  
DEQ  
AUTO SND OFF  
Calling up a user-defined equaliz-  
er setting (User Equalizer)  
In the "User Equalizer" menu, you  
can create, store and call up to  
three user-defined equalizer set-  
tings ("User EQ 1 to 3").  
: The corresponding user-  
defined equalizer setting is  
selected. The sound changes  
accordingly.  
: The corresponding user-  
defined equalizer setting is  
not selected.  
Press the softkey 7(next to  
"User Equalizer").  
Press the softkey :(next to  
"User EQ Off") to switch off  
the equalizer.  
The "User EQ" menu appears.  
Press one of the three softkeys  
7to 9(next to "User EQ 1",  
"User EQ 2" or "User EQ 3").  
106  
Changing basic settings in the settings menu  
Creating/changing a user-defined equalizer setting (Adjust)  
You can adjust the three different user-defined equalizer settings to  
different situations, e.g. for the driver alone, for driver and passenger  
or for passengers in the front and the rear.  
Select the user-defined equalizer setting which you want to create/  
change as described in the preceding section.  
Press the softkey <(next to "Adjust"). The "User EQ 1/2/3" menu  
opens.  
Microphone?  
User EQ 1  
Adjust  
EQ Low 1  
EQ Low 2  
EQ High 1  
EQ High 2  
EQ High 3  
EQ High 4  
Place Micro 1  
User EQ 1  
Manual  
Automatic  
Automatic:  
The temperature inside the  
vehicle must be below 55 °C.  
You can automatically create one  
of the three equalizer settings us-  
ing a measurement microphone  
(available as an accessory).  
All the loudspeakers must be  
connected. The sound radi-  
ating from the loudspeakers  
must not be obstructed by any  
objects.  
Before starting, ensure the fol-  
lowing:  
Position the measurement  
The measurement microphone  
must be connected before in-  
stalling the device as described  
in the installation instructions  
of the measurement micro-  
phone.  
microphone  
for the driver only – 10 cm  
next to the right ear of the  
driver,  
for driver and passenger  
– exactly between both at  
the head level,  
There must be true silence  
during the measurement since  
external noise falsify the meas-  
urement. For this reason, close  
all windows, doors, and the  
sliding sunroof. Switch off the  
engine, but leave the ignition  
switched on.  
for passengers in the front  
and rear – at the head level  
in the center of the vehicle.  
107  
Changing basic settings in the settings menu  
Ensure that all passengers in  
the vehicle are sitting and re-  
maining quiet.  
Manual:  
As an alternative, you can  
manually create the equalizer  
setting without measurement  
Change to the "User Equaliz-  
er" menu and call up one of the microphone. In each of the six  
user-defined equalizer settings frequency bands, you can select  
("User EQ 1 to 3") as described one specific individual centre  
in the preceding section.  
frequency and finely adjust its  
level and quality factor Q.  
Open the "User EQ 1/2/3"  
menu as described on page  
107.  
Insert a CD with which you are  
very familiar.  
Press the softkey 7(next to  
"Automatic") and follow the in-  
structions on the display.  
Adjust bass, treble, balance,  
and fader to zero.  
Open the "User EQ 1/2/3"  
menu as described on page  
107.  
After a 5-second countdown,  
you hear the teat noise and the  
display intermittently shows  
"Silence Please" and "Adjust-  
ing".  
Press the softkey <  
(next to "Manual").  
First, select a frequency band  
to be changed. First, change  
the centre, then the treble, fol-  
lowed by the bass.  
The automatic equalizer setting  
finishes successfully if the dis-  
play shows "Adjustment OK".  
The equalizer setting is saved.  
Any previously stored setting  
under this equalizer setting is  
overwritten. The new setting  
can now be called up under the  
corresponding equalizer set-  
ting ("User EQ 1 to 3").  
"EQ Low 1" to "2": To change  
the bass (20 to 250 Hz).  
"EQ High 1" to "4": To change  
the centre or treble (320 to  
20,000 Hz).  
The frequency spectrum is dis-  
played. if you already changed  
the level in another frequency  
band, this change is visible in  
the frequency spectrum.  
108  
Changing basic settings in the settings menu  
The current centre frequency  
(Hz) is highlighted.  
Select the desired quality fac-  
tor Q by pressing on or on  
the rocker switch 3.  
EQ 1  
"Q1": Low edge steepness,  
wide filter bandwidth  
2000Hz  
-8dB  
Q 1  
High 4  
"Q2": Medium edge steep-  
ness and filter bandwidth  
"Q3": High edge steepness,  
narrow filter bandwidth  
Select the centre frequency to  
be changed by pressing on or  
on the rocker switch 3.  
The change is displayed in  
the frequency spectrum. The  
sound changes accordingly.  
In the two frequency bands "EQ  
Low 1" and "2", you can select  
one centre frequency each from  
20 to 250 Hz.  
In the four frequency bands  
"EQ High 1" to "4", you can se-  
lect one centre frequency each  
from 320 to 20,000 Hz.  
Press the OK button A.  
Your user-defined equalizer set-  
ting is saved.  
Which equalizer setting is the  
correct one?  
Measure  
On the rocker switch 3,  
Sound impres-  
sion or problem  
Centre  
frequen-  
cy (Hz)  
Level (dB)  
press .  
The level display (dB) is high-  
lighted.  
Unclean bass,  
droning, unpleas-  
ant pressure  
125–400 approx. –4  
Select the level of the previ-  
ously set centre frequency by  
pressing on or on the rock-  
er switch 3.  
Very transparent, 1000–  
aggressive sound, 2500  
no stereo effect  
approx.  
–4 to –6  
Muffled sound,  
low transparency, 12500  
instruments do  
8000–  
approx.  
+4 to +6  
The level change is displayed  
in the frequency spectrum. The  
sound changes accordingly.  
not excel  
Insufficient bass  
50–100  
approx.  
+4 to +6  
On the rocker switch 3,  
press .  
The quality factor Q is high-  
lighted.  
109  
Changing basic settings in the settings menu  
Selecting a sound preset  
(Presets)  
This menu item allows you to se-  
lect one of the following sound  
presets: Vocal, Disco, Rock, Jazz,  
or Classic.  
On the rocker switch 3, press  
or to raise the volume in-  
crease.  
On the rocker switch 3, press  
or to lower the volume in-  
crease.  
Press the softkey located next  
Setting the bass increase  
(X-Bass)  
to the desired sound preset.  
: The sound preset is se-  
lected.  
X-bass is a bass increase at low  
volume. This bass increase can be  
set in increments from 0 (no in-  
crease) to 6 (maximum increase)  
for the following frequencies: 32 Hz,  
40 Hz, 50 Hz, 63 Hz, or 80 Hz.  
: The sound preset is not  
selected.  
Setting the speed-dependent  
volume increase (Auto Sound)  
Press the softkey ;  
When you are driving faster, the  
device can automatically increase  
the volume to compensate for the  
driving noise. In order for this to  
work, the speedometer signal  
must be connected as described  
in the installation instructions.  
You can adjust this volume in-  
crease from 0 (no increase) to 5  
(maximum increase).  
(next to "X-Bass").  
The individual frequencies are  
displayed as bars and the bass  
increase as bar segment.  
On the rocker switch 3, press  
or to select the desired fre-  
quency.  
On the rocker switch 3, press  
or to set the desired bass  
increase.  
Press the softkey 9(next to  
"Auto Sound").  
Switching off the equalizer  
The "Auto Sound" menu appears.  
Press the softkey :in the  
"Digital Equalizer" menu  
(next to "Off").  
Note:  
If no increase is set, the display  
shows "AUTO SND OFF".  
110  
Changing basic settings in the settings menu  
Configuring the preamplifier out-  
put for the subwoofer (Subout)  
If you want to use an additional  
subwoofer, it can be adjusted to  
the other loudspeakers.  
You can adjust the level of the  
Subout preamplifier output in  
13 increments from –6 dB (maxi-  
mum decrease) to +6 dB (maxi-  
mum increase) for one of the  
following cut-off frequencies:  
s80 Hz, 120 Hz, or 160 Hz.  
Press the softkey :in the  
"Audio Settings" menu (next to  
"Subout").  
The "Subout" menu appears.  
On the rocker switch 3,  
press or to select the de-  
sired cut-off frequency.  
On the rocker switch 3,  
press or to set the desired  
level of the preamplifier out-  
put.  
111  
Changing basic settings in the settings menu  
Changing display settings (Display Settings)  
In the "Display Settings" menu, you can adjust the display brightness  
and the display contrast, among other things.  
Press the MENU button ?. The settings menu appears.  
Press the softkey 8(next to "Display Settings").  
The "Display" menu appears.  
Display  
MMC  
SD  
Rock  
Ska  
Display Settings  
Night 08 Day 16  
DCIM  
Hip Hop  
Display  
USB  
Rock  
Ska  
DCIM  
Hip Hop  
Brightness  
Screen Saver  
Turn On Text  
SD Browser  
USB Browser  
Angle  
Angle  
ANGLE  
+6  
Changing the brightness of the  
display for day/night (Brightness)  
See page 83.  
Press any button to deac-  
tivate the screen saver and  
show the display of the ac-  
tive audio source again.  
Activating/deactivating the  
screen saver (Screen Saver)  
: The screen saver cannot  
be called up.  
The screen saver can be called up  
only if you activate the display of  
the screen saver here.  
Switching the welcome text  
on/off (Turn On Text)  
After switch-on, the display  
shows a brief animation. A wel-  
come text can be shown next.  
This text is factory set to "The  
advantage in your car!"  
Press the softkey 8(next to  
"Screen Saver").  
: You can call up the  
screen saver instead of the  
display of the audio source  
by pressing the ESC but-  
ton @.  
112  
Changing basic settings in the settings menu  
Press the softkey 9(next to  
Animations consist of  
"Turn On Text").  
max. 20 BMP files that are auto-  
matically displayed in succession  
just like single frames of a mov-  
ie. All BMP files of an animation  
must be stored in a separate fold-  
er. No other files may be stored in  
this folder!  
: The welcome text is  
shown after switch-on.  
: The welcome text is not  
shown.  
To change the welcome text, see  
"Changing the welcome text (Turn  
On Text)" on page 120.  
The images must be available as  
a file on an MMC/SD card or USB  
medium. The MMC/SD card must  
be inserted or the USB medium  
must be connected.  
Changing images and animations  
(SD Browser/USB Browser)  
You can replace the following fac-  
tory installed images and anima-  
tions with your own:  
Press the softkey <(next to  
"SD Browser") if the images  
are available on an MMC/SD  
card.  
the wallpaper which appears  
when "AUX" is selected as au-  
dio source (the image is set to  
a connector at the factory),  
Press the softkey ;(next to  
"USB Browser") if the imag-  
es are available on a USB me-  
dium.  
the screen saver,  
the wallpaper which appears  
if the radio is switched off and  
the vehicle ignition is switched  
on, and also the "Off Clock"  
menu item in the "Clock Set-  
tings" menu as described on  
page 117. The image is set to  
an analogue clock at the fac-  
tory.  
The file browser opens.  
You can select a BMP file or a  
folder from the list as follows:  
On the rocker switch 3,  
press or to scroll up or  
down.  
On the rocker switch 3,  
press to change up to a  
higher-level folder.  
For your images and animations  
to be displayed, they must be cre-  
ated using the BMP file format.  
For the images to be displayed  
without distortion, they should  
ideally have 270 x 96 pixels.  
On the rocker switch 3,  
press to change down to a  
subfolder.  
Press the OK button Ato  
select the selected file or the  
113  
Changing basic settings in the settings menu  
selected folder with the BMP  
files of the animation.  
Press the softkey :(next to  
"Angle").  
The "Picture Download" menu  
appears.  
The "Angle" menu opens and  
the current display contrast is  
shown.  
Press the softkey next to the  
image or the animation to be  
replaced.  
On the rocker switch 3,  
press or to increase the  
display contrast.  
"Clock" replaces the wallpa-  
per which appears if the ra-  
dio is switched off and the  
vehicle ignition is switched  
on,  
On the rocker switch 3,  
press or to decrease the  
display contrast.  
You can adjust the display con-  
trast in 13 increments from  
–6 to +6.  
"Minimal Mode" replaces the  
screen saver,  
"Aux" replaces the wallpaper  
which appears if "AUX" is se-  
lected as audio source.  
A progress bar illustrates the  
transfer of the file. As soon as  
the file has been transferred,  
the display of the active au-  
dio source appears. Your image  
or animation now replaces the  
factory setting.  
Adjusting the display viewing  
angle (Angle)  
The angle at which the driver  
looks at the display is depend-  
ent upon, among other things,  
the installation position of the de-  
vice, the seating position, and the  
physical size of the driver. You  
can adjust the display contrast to  
your viewing angle as follows.  
114  
Changing basic settings in the settings menu  
Changing volume presettings (Volume Settings)  
In the "Volume Settings" menu, select the volume presettings for traf-  
fic announcements, the telephone, the signal tones, etc.  
Press the MENU button ?. The settings menu appears.  
Press the softkey 9(next to "Volume Settings").  
The "Volume Settings" menu appears. The volume presettings are  
displayed as two-digit numbers. One of the two menu items "On Vol-  
ume" or "Last Volume" is highlighted.  
On Volume  
Traf Volume  
Phone Volume  
Beep Volume  
15  
25  
03  
10  
Volume Settings  
Volume  
Last Volume  
Traffic Volume 15  
Phone Volume 25  
Beep Volume 03  
On Volume 10  
Last Volume  
Last Volume active  
Changing the volume presetting  
of traffic announcements (Traffic  
Volume)  
If the device puts a traffic an-  
nouncement through, you hear it  
at the preset volume.  
If a traffic announcement is  
broadcast, the device automat-  
ically puts it through at this  
volume. During the traffic an-  
nouncement, you can always  
change the volume by means of  
the volume control 5.  
Press the softkey 7(next to  
"Traffic Volume").  
Changing the volume presetting  
of the telephone (Phone Volume)  
If the device puts a phone call  
through, it always starts at the pre-  
set volume.  
The volume presetting for traf-  
fic announcements appears.  
Adjust the desired volume  
using the volume control 5  
or the rocker switch 3(incre-  
ments 1 to 50).  
Press the softkey 8(next to  
"Phone Volume").  
115  
Changing basic settings in the settings menu  
The volume presetting for  
phone calls appears.  
"On Volume" menu item must be  
highlighted.  
Press the softkey <(next to  
Adjust the desired volume us-  
ing the volume control 5or  
the rocker switch 3(incre-  
ments 1 to 50).  
"On Volume").  
The presetting for the power-  
on volume appears.  
During the phone call, you can  
always change the volume by  
means of the volume control 5.  
Adjust the desired volume  
using the volume control 5  
or the rocker switch 3(incre-  
ments 1 to 50).  
Changing the volume presetting  
of the signal tone (Beep Volume)  
If a signal tone sounds, you al-  
If you open the "Volume Set-  
tings" menu again, the "On Vol-  
ume" menu item is highlighted.  
ways hear it at the preset volume.  
Press the softkey 9(next to  
Restoring the volume at switch-  
on (Last Volume)  
"Beep Volume").  
The volume presetting for the  
signal tone appears.  
You can configure the device so  
that the playback after switch-on  
always starts with the previously  
selected volume. For this pur-  
pose, the "Last Volume" menu  
item must be highlighted.  
Adjust the desired volume  
using the volume control 5  
or the rocker switch 3(incre-  
ments 0 to 6).  
Press the softkey ;(next to  
You hear a signal tone at the se-  
lected volume.  
"Last Volume").  
"Last Volume active" briefly  
appears on the display. If you  
open the "Volume Settings"  
menu again, the "Last Volume"  
menu item is highlighted.  
If you do not want to hear any  
signal tones, set the volume to  
zero.  
"BEEP OFF" appears on the dis-  
play.  
Changing the presetting of the  
power-on volume (On Volume)  
You can configure the device so  
that the playback after switch-  
on always starts with the volume  
set here. For this purpose, the  
116  
Changing basic settings in the settings menu  
Changing clock settings (Clock Settings)  
In the "Clock Settings" menu, you can set the clock of the device as  
well as change the display options of the clock.  
Press the MENU button ?. The settings menu appears.  
Press the softkey <(next to "Clock Settings").  
The "Clock" menu appears.  
Time Set  
:
0
0
0
0
Clock Settings  
Hours : Minutes  
Clock  
Auto Sync  
Time Setting  
Off Clock  
24 h Mode  
Setting the time (Time Setting)  
Note:  
To quit the input without  
changing the time, press the  
ESC button @.  
Press the softkey 7(next to  
"Time Setting").  
The currently set time appears.  
The hours are highlighted.  
Switching the time display on/  
off with switched-off device  
(Off Clock)  
The time can be displayed while  
the device is switched off, if the  
vehicle ignition is switched on. To  
switch this time display on/off:  
On the rocker switch 3,  
press or to change the  
hours.  
On the rocker switch 3,  
press to change to the min-  
utes.  
On the rocker switch 3,  
press or to change the min-  
utes.  
Press the softkey 8(next to  
"Off Clock").  
: The time display is  
switched on.  
Press the OK button Ato fin-  
ish the input and to save the  
time.  
: The time display is  
switched off.  
117  
Changing basic settings in the settings menu  
Switching the RDS synchro-  
nisation of the clock on/off  
(Auto Sync)  
The clock can automatically be  
synchronised with the RDS time  
signal, provided that a station is  
set that broadcasts this RDS time  
signal.  
Switching the 24-hour time dis-  
play on/off (24 h Mode)  
The time can be displayed using  
the 12-hour or 24-hour format.  
To switch between these two for-  
mats:  
Press the softkey ;(next to  
"24 h Mode").  
Press the softkey <(next to  
: The 24-hour format is  
switched on.  
"Auto Sync").  
: The synchronisation is  
switched on.  
: The 12-hour format  
(AM/PM) is switched on.  
: The synchronisation is  
switched off.  
Configuring audio inputs (Aux Settings)  
Up to two external audio source, such as MiniDisc player or external  
MP3 player, can be connected to the audio inputs "Auxiliary 1" and  
"Auxiliary 2". If you are connecting a CD changer, it occupies audio in-  
put "Auxiliary 1" and you can also connect "Auxiliary 2".  
The audio sources "Auxiliary 1" and "Auxiliary 2" cannot be operated  
using the Memphis. Only the volume can be changed.  
Press the MENU button ?. The settings menu appears.  
Press the softkey ;(next to "Aux Settings").  
The "Aux" menu appears. The audio input "Auxiliary 1" is displayed  
only if no CD changer is connected.  
Aux Settings  
AUX  
Aux  
AUX  
Auxiliary 2  
Edit Auxiliary 2  
Auxiliary 1  
Edit Auxiliary 1  
A U X I L I A R Y  
2
A U X I L I A R Y  
1
Auxiliary 2 Name Source Edit  
Auxiliary 1 Name Source Edit  
118  
Changing basic settings in the settings menu  
Activating/deactivating audio  
inputs (Auxiliary 1/2)  
Audio inputs, to which you are  
connecting external audio sourc-  
es, must be activated as follows.  
On the rocker switch 3,  
press to change to the next  
character. The name can have  
up to 16 characters.  
Press the OK button Ato fin-  
ish the text input and to store  
the name entered.  
Press the softkey <(next to  
"Auxiliary 1") and/or the soft-  
key 7(next to "Auxiliary 2").  
Note:  
The status of the audio input is  
displayed:  
To quit the text input without  
changing the name, press the  
ESC button @.  
: The corresponding audio  
input is activated and can be  
selected as audio source  
using the SRC Taste B.  
: The corresponding audio  
input is deactivated. It can-  
not even be selected as  
audio source if an external  
audio source is connected.  
Renaming audio inputs  
(Edit Auxiliary 1/2)  
If you select an audio input as  
audio source, "Auxiliary 1" or  
"Auxiliary 2" appears on the dis-  
play. To change this name:  
Press the softkey ;(next to  
"Edit Auxiliary 1") and/or the  
softkey 8(next to "Edit Auxil-  
iary 2").  
The text input appears. The  
first character of the name is  
highlighted.  
On the rocker switch 3, re-  
peatedly press or to change  
the highlighted character.  
119  
Changing basic settings in the settings menu  
Changing special settings (Various Settings)  
In the "Various Settings" menu, you can change the scan time for the  
scan function and the welcome text.  
Press the MENU button ?. The settings menu appears.  
Press the softkey :located next to the "Various Settings" menu  
item.  
The "Various Settings" menu appears.  
Various Menu  
Norm Set  
T
Y
H
O
E
U
A
D
C
V
A
A
R
N
!
T
A
G
E
I
N
Start Normset ?  
R
Various Settings  
Press softkey 4 for 2 sec to confirm  
Turn On Text  
Various  
Various Menu  
Turn On Text  
Internal Amp  
Norm Set  
Scan Time  
SCAN TIME 10 Sec  
Serial Number  
Scan time settings  
Various Menu  
BP481530000002  
SERIAL NUMBER OF RADIO  
Changing the welcome text  
(Turn On Text)  
When you switch on the device, a  
welcome text appears. This text  
is factory set to "The advantage in  
your car!" To change this text:  
On the rocker switch 3, press  
to change to the next charac-  
ter. The welcome text can have  
up to 35 characters.  
Press the OK button Ato fin-  
ish the text input and to store  
the welcome text entered.  
Press the softkey 7(next to  
"Turn On Text").  
Note:  
The text input appears. The  
first character of the welcome  
text is highlighted.  
To quit the text input without  
changing the welcome text,  
press the ESC button @.  
On the rocker switch 3, re-  
peatedly press or to change  
the highlighted character.  
120  
Changing basic settings in the settings menu  
Switching the internal amplifier  
on/off (Internal Amp)  
If you connected the device to an  
external power amplifier via the  
preamplifier outputs (Preamp),  
you can switch off the internal  
amplifier of the device as follows:  
: The internal amplifier is  
switched off. Loudspeakers  
connected to the device al-  
ways remain mute. The loud-  
speakers must be connected  
to the external amplifier.  
Resetting the device to factory  
settings (Norm Set)  
Press the softkey <(next to  
CAUTION!  
No sound with switched-  
off internal amplifier!  
"Norm Set").  
The "Norm Set" menu appears.  
If you switch off the internal am-  
plifier, you do not hear a sound  
from the loudspeakers connected  
to the device!  
Press and hold the softkey <  
for approx. two seconds.  
"NORMSET ON" briefly appears  
on the display. The device is re-  
set to the factory settings. Im-  
ages and animations, which  
you transferred to the device,  
are deleted.  
Switch off the internal amplifi-  
er only if you connected an ex-  
ternal power amplifier to the  
preamplifier outputs (Preamp)  
of the device and you connect-  
ed your loudspeakers to this  
power amplifier:  
Note:  
To exit the "Norm Set" menu  
without resetting the device to  
the factory settings, press the  
OK button Aor the ESC but-  
ton @.  
Press the softkey 8(next to  
"Internal Amp").  
The status of the internal am-  
plifier is displayed:  
Changing the scan time  
(Scan Time)  
Press the softkey ;(next to  
: The internal amplifier  
is switched on. Loudspeak-  
ers connected to the device  
play back the selected audio  
source.  
"Scan Time").  
The current scan time is dis-  
played.  
121  
Error table  
Displaying the serial number  
(Serial Number)  
Every device has a separate serial  
number. To display this number:  
On the rocker switch 3,  
repeatedly press or to  
increase the scan time.  
On the rocker switch 3,  
repeatedly press or to  
decrease the scan time.  
Press the softkey :(next to  
"Serial Number").  
You can adjust scan times in in-  
crements of 5 seconds form 5 to  
30 seconds.  
The serial number is displayed.  
Error table  
If the device does not function properly, switch the device off and on  
again.  
If problems still persist, you can easily correct the following problems.  
Problem  
Possible cause  
Possible remedy  
The menus do not appear  
as shown in these instruc-  
tions.  
The device is not set to  
your region.  
Set the device to your  
region as described on  
page 88.  
The tuner cannot be adjust-  
ed to the frequencies listed  
in the technical data.  
The display shows informa-  
tion about the device.  
The demo mode is acti-  
vated.  
Press and hold the MENU  
button ?for four seconds.  
The device is always silent,  
even though it is correctly  
connected.  
The internal amplifier is  
switched off.  
Switch on the internal  
amplifier as described on  
page 121.  
If problems still persist, please contact an authorised workshop or the  
Blaupunkt customer service (see the last page).  
122  
Specifications  
Specifications  
Weight  
approx. 1.5 kg  
10.5–14.4 V  
Voltage supply  
Operating voltage:  
Current consumption  
In operation:  
max. 10 A  
< 3.5 mA  
10 seconds after switch-off:  
Amplifier output power acc. to DIN 45324:  
at 14.4 V:  
4 x 25 W sine  
max. power:  
4 x 45 W at 14.4 V  
Preamplifier output (Preamp Out)  
4 channels:  
3 V  
Input sensitivity  
AUX inputs:  
2 V / 6 kΩ  
Telephone input:  
10 V / 1 kΩ  
Tuner  
FM waveband:  
AM waveband:  
LW waveband:  
FM frequency response:  
87.5–108 MHz  
531–1602 kHz  
153–279 kHz  
35–16,000 Hz  
CD player  
Frequency response:  
20–20,000 Hz  
Subject to technical changes!  
123  
Glossary  
Quality factor Q  
Glossary  
It determines the filter quality of  
the equalizer, i.e. the edge steep-  
ness and filter bandwidth, de-  
pendent upon the characteristic  
frequency.  
AF – Alternative frequency  
The range of FM stations is lim-  
ited. For this reason, FM pro-  
grammes are distributed to dif-  
ferent frequencies. The AF RDS  
service sends these frequencies  
to the tuner. If the reception de-  
teriorates because the vehicle  
leaves the reception area of a fre-  
quency, the tuner can automati-  
cally change to the best receiva-  
ble frequency.  
ID3 tags  
ID3 tags contain additional infor-  
mation for MP3 files (e.g. artist,  
title, album, genre, year).  
Mass storage device  
Format for storage media that can  
permanently store large amounts  
of data, such as USB removable  
storage devices (USB stick or  
USB hard disk).  
DEQmaxEx – Digital paramet-  
ric equalizer with variable filter  
quality  
This function allows for a maxi-  
mum of exact frequency optimisa-  
tion, so that the sound spectrum  
can be adjusted to the vehicle or  
your individual taste.  
MMC/SD card (Multimedia Card/  
Secure Digital Card)  
MMC/SD cards are memory card  
formats that can be inserted in  
card slot Dof the device. The de-  
vice can play MP3 and WMA files  
stored on the memory cards.  
EON – Enhanced Other Network  
In case of a traffic announcement  
(TA), the device switches from  
a non-traffic information station  
to a traffic information station of  
the same broadcasting network  
(e.g. from NDR 3 to NDR 2).  
After the traffic announcement,  
the system switches back to the  
previously heard programme.  
MP3, WMA  
MP3 and WMA are audio data for-  
mats that allow for high compres-  
sion with little loss in quality.  
Playlist  
Playback list for MP3 or WMA  
files In playlists, you determine  
the order in which certain titles  
should be played.  
124  
Glossary  
They are created with an MP3  
manager, such as WinAmp or Win-  
dows Media Player.  
Root directory  
Main directory of a data carrier.  
The root directory contains all  
other directories.  
PTY – Program Type  
The device searches only for sta-  
tions with preselectable pro-  
gramme content (e.g. news, rock,  
pop, sports, etc.)  
Subwoofer, Subout  
Separate low-bass loudspeaker.  
The device has a Subout pream-  
plifier output. You can connect  
either an active subwoofer or a  
separate power amplifier with  
subwoofer.  
PTY 31  
The car sound system automati-  
cally switches through emergency  
and disaster announcements.  
TA – Traffic Announcement  
RDS – Radio Data System  
The car sound system switches  
traffic announcements through,  
even if you are currently listening  
to other sources (e.g. CD, AUX) or  
the radio is muted.  
RDS is a service of the radio sta-  
tions. Besides the conventional  
music and voice contributions,  
additional information is broad-  
cast in the form of encrypted dig-  
ital signals which can be analysed  
by the car sound system.  
TMC – Traffic Message Channel  
RDS data service for area-based  
traffic announcements. Digital  
traffic information data channel  
with continuously updated data  
about the traffic situation. TMC  
receivers allow for a selection of  
the data flow with respect to di-  
rection of travel, area or type of  
street. With a push of a button,  
you have access to the most cur-  
rent tailor-made information at all  
times.  
Note:  
The RDS services are not sup-  
ported by all radio stations!  
REG – Regional  
Activating the regional service  
(REG ON) prevents switching  
over to a frequency with better  
reception of the adjacent regional  
programme. This allows for con-  
tinuously a regional programme  
even in peripheral regions. The  
disadvantage is that the station  
may not be received without in-  
terferences.  
125  
Glossary  
Your device has a TMC output,  
which you can use for connect-  
ing Blaupunkt navigation systems.  
Please contact your authorised  
Blaupunkt dealer for additional  
information.  
T-STORE – Travelstore  
Automatic searching and storing  
of the six strongest radio stations  
received of the region.  
Tuner  
Receiving unit of the radio.  
USB – Universal Serial Bus  
USB is an interface for connect-  
ing external removable storage  
devices to the car sound system.  
X-BASS  
X-BASS allows for boosting the  
bass at low volume levels (loud-  
ness). This renders the sound  
more natural even at a low vol-  
ume.  
126  
Index  
Changing the name of a CD in the  
CD changer magazine 103  
inserting 74  
removing 74  
Selecting from the CD changer  
magazine 102  
CD changer 102  
Changing the name of a CD in the  
magazine 103  
Display 79  
Functions 102  
CD changer display 79  
CD display 78  
CD overview 103  
CD player 95  
Display 78  
Functions 96  
CD text 97  
Clock 117  
Index  
Symbole  
24 h MODE 118  
A
ADJUST 107  
ALL 99  
Alternative frequencies  
Allowing 90  
Amplifier 121  
AREA 88  
Audio inputs  
Activating 119  
Configuring 118  
Renaming 119  
AUDIO SETTINGS 105  
Audio source 77  
Tuner 85  
AUTOMATIC 107  
AUTO SOUND 110  
AUTO SYNC 118  
AUXILIARY 119  
AUX SETTINGS 118  
24-hour time display 118  
Display with switched-off device  
117  
Setting 117  
Synchronise with RDS 118  
CLOCK SETTINGS 117  
Control panel 73  
Correcting errors 122  
Correcting malfunctions 122  
Country code 88  
B
BALANCE 105  
Band 89  
BAND button 72, 83  
BASS 105  
Bass increase 110  
BEEP VOLUME 116  
Browser 100  
Button for detaching the control panel  
72  
Buttons 72  
Button to eject/insert a CD 72  
D
DIGITAL EQUALISER 106  
Display  
Animation 113  
Brightness 83  
Images 113  
Viewing angle 114  
DISPLAY SETTINGS 112  
C
CD  
Note:  
Keywords in capital letters refer to menu items.  
127  
Index  
E
Mono operation 90  
MP3  
Files on CD 95  
MP3 display 79  
MP3 player 98  
Display 79  
EDIT AUXILIARY 119  
EQUALISER 106, 110  
Calling up a user-defined setting  
106  
Creating a user-defined setting 107  
Settings recommendations 109  
ESC button 73, 83  
Functions 98  
Muting 76  
F
N
Factory settings 121  
FADER 105  
NEXT button 72, 83  
NORM SET 121  
FM1, FM2, FM3, and FMT 85  
Forward 80  
O
OFF CLOCK 117  
OK button 73, 80, 83  
On/Off button 72  
ON VOLUME 116  
H
HICUT 91  
High Cut 91  
I
P
Improved reception 91  
INF 99  
INTERNAL AMP 121  
PHONE VOLUME 115  
Playlist 100  
PRESETS 110  
PROGRAM TYPE 92  
PTY 92  
L
LAST VOLUME 116  
R
M
RADIO TEXT 90  
Radiotext 90  
Random track play 81  
RDS 90  
Receiving a regional programme 91  
Region  
Adjust 88  
REGIONAL 91  
Repeat 81  
Repeat mode 81  
Repeat title 82  
Reverse 80  
Rocker switch 72, 80  
RPT 81, 82  
MANUAL 108  
Memory bank 85  
Memory card  
inserting 75  
removing 75  
Menu  
Calling 83  
Changing and saving settings 84  
Exiting 84  
Operate 82  
Operating example 83  
Settings menu 104  
Tuner 89  
MENU button 73, 83  
MIX 81  
S
MMC card: see Memory card  
MONO 90  
Safety 70  
SCAN 82  
128  
Index  
SCAN TIME 121  
Scan time 121  
SCL 97, 99  
U
USB BROWSER 113  
USB stick  
SCREEN SAVER 112  
Screen saver 112  
SD BROWSER 113  
SD card: see Memory card  
Seek tuning sensitivity 92  
SENSITIVITY 92  
SERIAL NUMBER 122  
Serial number 122  
Settings menu 104  
Skip title 80  
Softkey 72, 80  
Sound 105  
Presetting 109  
SRC button 73  
Station  
Calling 87  
Scanning 87  
Searching 85  
Storing 87  
Stereo operation 90  
SUBOUT 111  
Subwoofer 111  
Switch-off 74  
connecting 75  
USER EQUALISER 106  
V
VARIOUS SETTINGS 120  
Volume 76  
At switch-on 116  
Muting 76  
Presetting 115  
Speed-dependent increase 110  
Volume control 72  
Volume distribution 105  
VOLUME SETTINGS 115  
W
Warranty 71  
Waveband 89  
Welcome text 112, 120  
WMA  
Files on CD 95  
WMA player 98  
Functions 98  
X
X-BASS 110  
Switch-on 74  
T
TA 81  
Telephone 76  
TIME SETTING 117  
Title information 99  
Traffic announcements 81, 93  
Switching the priority on/off 93  
TRAFFIC VOLUME 115  
Travelstore 90  
TREBLE 105  
Tuner  
Display 78  
Tuner display 78  
TURN ON TEXT 112, 120  
TXT 97  
129  
Einbauanleitung • Installation instructions • Notice de montage • Istruzioni di installazione •  
Inbowhandleiding • Monteringsanvisning  
bevor die Stecker für die Line-In- oder  
Line-Out-Buchse kontaktiert werden.  
Einbauanleitung  
Fremdgerätemassen dürfen nicht an  
Sicherheitshinweise  
Für die Dauer der Montage und  
des Anschlusses beachten Sie bitte fol-  
der Autoradiomasse (Gehäuse) ange-  
schlossen werden.  
gende Sicherheitshinweise.  
Minuspol der Batterie abklemmen!  
Dabei die Sicherheitshinweise des  
Kfz- Herstellers beachten.  
Installation  
instructions  
Beim Bohren von Löchern darauf  
achten, dass keine Fahrzeugteile be-  
schädigt werden.  
Safety instructions  
When carrying out installation  
work and making connections please  
observe the following safety instruc-  
tions:  
Der Querschnitt des Plus- und Minus-  
kabels darf 1,5 mm2 nicht unter-  
schreiten.  
Disconnect the negative terminal of  
the battery! When doing so, please  
observe the vehicle manufacturer’s  
safety instructions.  
Fahrzeugseitige Stecker nicht an  
das Radio anschließen!  
Die für Ihren Fahrzeugtyp erforder-  
lichen Adapterkabel erhalten Sie im  
BLAUPUNKT-Fachhandel.  
Make sure you do not damage vehi-  
cle components when drilling any  
holes.  
Je nach Bauart kann Ihr Fahrzeug  
von dieser Beschreibung abwei-  
chen. Für Schäden durch Einbau-  
oder Anschlussfehler und für Folge-  
schäden übernehmen wir keine  
Haftung.  
The cross sections of the positive  
and negative cables must not be less  
than 1.5 mm2.  
Do not connect the vehicle’s plug  
connectors to the radio!  
You can obtain the adapter cable re-  
quired for your vehicle type from any  
BLAUPUNKT dealer.  
Sollten die hier aufgeführten Hin-  
weise für Ihren Einbau nicht pas-  
sen, so wenden Sie sich bitte an  
Ihren Blaupunkt-Fachhändler, Ihren  
Fahrzeughersteller oder unsere  
Telefon-Hotline.  
Depending on the model, your vehi-  
cle may differ from the description  
provided here. We accept no respon-  
sibility for any damages due to incor-  
rect installation or connection or for  
any consequential damages.  
Bei Einbau eines Amplifier oder  
Changers müssen unbedingt erst die  
Gerätemassen angeschlossen werden,  
387  
If the information provided here is  
not suitable for your specific instal-  
lation requirements, please contact  
your Blaupunkt dealer, your vehicle  
manufacturer or our telephone hot-  
line.  
par des erreurs de montage ou de  
connexion et en cas de dommages  
consécutifs.  
Si les indications décrites ici ne s’ap-  
pliquent au montage que vous voulez  
effectuer, adressez-vous à votre re-  
vendeur Blaupunkt, votre construc-  
teur automobile ou notre service  
d’assistance téléphonique.  
When installing an amplifier or changer,  
you must first connect the device earth  
connections before connecting the  
plugs for the line-in or line-out jacks.  
Pour le montage d’un amplificateur ou  
changeur, les masses d’appareil doi-  
vent être d’abord connectées avant de  
connecter les fiches pour les connec-  
teurs Line In ou Line Out.  
Earth connection of external devices  
may not be connected to earth of car  
sound system (housing).  
Les masses des appareils externes  
ne doivent pas être raccordées à la  
masse de l'autoradio (boîtier).  
Notice de montage  
Consignes de sécurité  
Respecter les consignes de sécu-  
rité suivantes pendant la durée du mon-  
tage et du branchement.  
Istruzioni di  
installazione  
Débrancher le pôle (-) de la batterie !  
Respecter les consignes de sécurité  
du constructeur automobile !  
Note di sicurezza  
Durante il montaggio e l’allaccia-  
mento osservate per favore le seguenti  
istruzioni sulla sicurezza.  
Veiller à n’endommager aucune piè-  
ce du véhicule en perçant des trous.  
La section du câble (+) et (-) ne doit  
pas dépasser 1,5 mm2.  
Ne pas brancher les connecteurs  
du véhicule sur la radio !  
Les câbles d’adaptation nécessai-  
res pour le type de véhicule sont  
disponibles auprès des revendeurs  
BLAUPUNKT.  
Staccate il polo negativo della batte-  
ria! Nel fare ciò osservate le istruzio-  
ni di sicurezza del fabbricante d’au-  
to.  
Quando praticate dei fori, fate at-  
tenzione a non danneggiare nessuna  
parte dell’autovettura.  
La sezione dei cavi positivi e nega-  
tivi non deve essere mai inferiore  
a 1,5 mm2.  
En fonction du modèle, votre véhi-  
cule peut différer de cette descrip-  
tion. Nous déclinerons toute respon-  
sabilité en cas de dommages causés  
Non collegate alla radio le spine  
in dotazione di autovettura!  
388  
Richiedete ad un negoziante specia-  
lizzato in articoli BLAUPUNKT il cavo  
di adattamento richiesto per il vostro  
modello di autovettura.  
De dwarsdoorsnede van de plus-  
en minkabel mag niet minder dan  
1,5 mm2 zijn.  
Stekker aan de voertuigkant niet  
aan de radio aansluiten!  
de voor uw voertuig vereiste adap-  
terkabel is bij de BLAUPUNKT-vak-  
handel verkrijgbaar!  
A seconda del modello il Suo veicolo  
può differire da questa descrizione.  
Non forniamo garanzia per danni  
derivanti da errori di montaggio o  
di collegamento e per danni conse-  
guenti.  
Afhankelijk van de uitvoering kan uw  
auto afwijken van deze beschrijving.  
Voor schade door fouten in montage  
of aansluiting en schade als gevolg  
daarvan aanvaarden wij geen aan-  
sprakelijkheid.  
Se le indicazioni qui elencate non  
sonoadattealSuomontaggio,Lapre-  
ghiamo di rivolgersi al Suo rivendito-  
re Blaupunkt, al fabbricante dell’auto  
o alla nostra hotline telefonica.  
Mochten de hier vermelde aanwijzin-  
gen voor de montage voor u niet van  
toepassing zijn, dan kunt u contact  
opnemen met uw Blaupunkt-vak-  
handel, uw autofabrikant of onze te-  
lefoon-hotline.  
Quando vengono montati un amplifi-  
catore o un multilettore CD, bisogna  
innanzi tutto allacciare le masse degli  
apparecchi prima di eseguire la connes-  
sione delle spine con le prese line-in e  
line-out.  
Bij inbouw van een versterker of cd-wis-  
selaar moeten eerst de massacontacten  
van de apparaten worden verbonden  
voordat de stekkers voor de line-in- of  
line-out-bussen worden aangesloten.  
Le masse di altri apparecchi non de-  
vono essere collegate alla massa del-  
l'autoradio (involucro).  
De massa van andere apparaten mag  
niet aan de massa van de autoradio  
(huis) worden aangesloten.  
Inbowhandleiding  
Adviezen voor de  
veiligheid  
Wilt u dedurende het monteren en aan-  
sluiten de volgende veiligheidsadviezen  
in acht nemen.  
Monteringsanvisning  
Skyddsanvisningar  
De minpool van de batterij afklem-  
men! De veiligheidsadviezen van de  
fabrikant in acht nemen.  
Vänligen beakta följande skydds-  
anvisningar under pågående montage  
och anslutning.  
Bij het gaten boren erop letten dat  
geen voertuigonderdelen worden  
beschadigd.  
Lossa polskon från batteriets minus-  
pol! Följ därvid fordonstillverkarens  
skyddsanvisningar.  
389  
Se till att inga av fordonets kompo-  
nenter skadas i samband med borr-  
ning av hål.  
Plus- och minuskabelns ledningsa-  
rea måste vara minst 1,5 mm2.  
Fordonets stickkontakt får inte  
anslutas till radion!  
Din BLAUPUNKT fackhandel tillhan-  
dahåller för resp fordonstyp erfor-  
derlig adapterkabel.  
Beroende på konstruktionstyp kan  
fordonet avvika från denna beskriv-  
ning. Vi frånsäger oss allt ansvar för  
skada eller följdskada pga. felaktig  
montering eller anslutning.  
Om här givna monteringsanvisning-  
ar ej stämmer överens med faktiska  
förhållanden, vänligen kontakta  
Blaupunkt fackhandel, representant  
för fordonets tillverkare eller vår te-  
lefonkundtjänst.  
Vid montering av förstärkare eller cd-  
växlare måste först apparatstommen  
jordas, innan stickpropparna ansluts till  
in- eller utgångarna (hylstag line-in resp  
line-out).  
Jord från andra apparater får inte  
anslutas till bilradions jord (höljet).  
390  
Als Sonderzubehör erhältlich  
Available as an optional accessory  
Disponible en option  
Reperibili come accessori extra  
Als speciale accessoire verkrijgbaar  
Tillval  
Mitgelieferte Montage- und  
Anschlussteile  
Supplied Mounting Hardware  
Materiel de montage fourni  
Componenti di fissaggio comprese  
nella fornitura  
Meegeleverde montagematerialen  
Medföljande monteringsdetaljer  
Preamp,/Sub,/Center - out cable  
7 607 001 512  
A
B
7 607 621 . . .  
USB cable  
7 607 001 511  
Microphones  
391  
1.  
Einbausätze  
Installation kits  
Kits de montage  
Set di montaggio  
Inbouwsets  
Monteringssatser  
12V  
2.  
ca. 10 mm  
7 608 . . . . . .  
3.  
0°- 30°  
+/– 10°  
+/– 10°  
392  
4.  
6. Ausbau / Removal / Démontage /  
Smontaggio / Demontage /  
Urmontering  
1.  
USB connection  
Antenna  
connection  
2.  
2.  
B
5.  
8 613 150 002  
182  
165  
53  
1-20  
A
3.  
7.  
12V  
393  
8.  
C-1 C-2 C-3  
Aut. antenna  
1
4
7
10  
12  
13 16  
19  
15 18  
14 17 20  
FB +12V / RC +12V  
+12V Amplifier  
3
6
9
C
B
A
2
5
8
11  
*
1
3
4
5
6
7
D
2
8
10 Ampere  
max. 300 mA  
1
3
4
5
6
7
8
2
D
A
B
1
2
3
4
5
6
7
8
9
10  
AUX 2 NF L  
AUX 2 NF R  
AUX 2 GND  
NC  
1
No connection  
Radio Mute  
Sub-out  
1
2
3
4
5
6
7
8
Speaker out RR+  
Speaker out RR-  
Speaker out RF+  
Speaker out RF-  
Speaker out LF+  
Speaker out LF-  
Speaker out LR+  
Speaker out LR-  
2
3
4
5
6
7
8
NC  
NC  
NC  
NC  
Permanent +12V  
Aut. antenna  
Illumination  
MIC GND  
MIC INPUT  
Kl.15/Ignition  
*
Masse/GND  
C
C1  
C2  
C3  
1
Line Out LR  
Line Out RR  
7
8
Telefon NF in +  
Telefon NF in -  
Radio Mute  
RC +12V  
13  
14  
15  
16  
17  
18  
19  
20  
CDC-Data - In  
2
3
4
5
6
CDC-Data - Out  
Permanent +12V  
Line Out / Ground  
Line Out LF  
9
10  
11  
12  
+12V  
*  
*
Line Out RF  
Remote Control  
RC - GND  
Bus / GND  
+12V Amplifier  
AF / GND  
*
CDC Line In - L  
CDC Line In - R  
Equalizer  
Amplifier  
Optional  
(Remote Control Eye)  
CD-Changer  
394  
9.  
Preamp./Sub./Center - out cable  
7 607 001 512  
BN  
12V  
Relais  
+12V Amplifier  
+12V  
Sub out  
7
5
3
4
1
Kl. 15 +12V  
8
6
2
Radio Mute  
+
4 Ohm  
-
LR  
+
-
LF  
RF  
4 Ohm  
4 Ohm  
4 Ohm  
RR  
+
-
+
-
12V  
12  
V
Änderungen vorbehalten!  
Subject to changes!  
Sous réserve de modifications!  
Modifiche riservate!  
Wijzigingen voorbehouden!  
Ändringar förbehålles!  
395  
396  
Bitte den ausgefüllten Gerätepass sicher aufbewahren!  
Please keep the filled-in radio pass in a safe place!  
Prière de conserver soigneusement la carte d’autoradio remplie !  
Tenete per favore il libretto di apparecchio, debitamente riempito, in un  
posto sicuro!  
Bewaar de ingevulde apparaatpas op een veilige plaats!  
Vänligen förvara ifyllt apparatpass på säker plats!  
397  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
Austria  
(D)  
0180-5000225  
01-610 39 0  
02-525 5444  
44 898 360  
05121-49 4002  
01-610 39 391  
02-525 5263  
44-898 644  
(A)  
Belgium  
Denmark  
Finland  
(B)  
(DK)  
(FIN)  
(F)  
09-435 991  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 94 12 711  
01-46 66 706  
02-369 62464  
40 2085  
France  
01-4010 7007  
01-89583 8880  
210 94 27 337  
01-46 66 700  
02-369 62331  
40 4078  
Great Britain  
Greece  
(GB)  
(GR)  
(IRL)  
(I)  
Ireland  
Italy  
Luxembourg  
Netherlands  
Norway  
(L)  
(NL)  
(N)  
0800 400 1010  
66-817 000  
0800 400 1040  
66-817 157  
Portugal  
Spain  
(P)  
2185 00144  
902 52 77 70  
08-7501850  
01-8471644  
02-6130 0446  
76 511 803  
2185 00165  
91 410 4078  
08-7501810  
01-8471650  
02-6130 0514  
76 511 809  
(E)  
Sweden  
Switzerland  
Czech. Rep.  
Hungary  
Poland  
(S)  
(CH)  
(CZ)  
(H)  
(PL)  
(TR)  
0800-118922  
0212-335 06 71  
022-8771260  
0212-346 00 40  
708-6817188  
Turkey  
USA  
(USA) 800-2662528  
Brasil  
(Mercosur)  
Malaysia  
(Asia Pacific)  
(BR)  
0800 7045446  
+55-19 3745 2773  
+604-6413 640  
(MAL) +604-6382 474  
Gerätepass  
Memphis MP66  
Name:  
Typ:  
.....................................................................  
7 646 . . .  
....................................................................  
Serien-Nr:  
BP ................................................................  
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim  
09/07 - CM-AS/SCS  
dt, gb, fr, it, nl, sw)  
(
8622404853  

ARRI 12xT1 3 User Manual
Bassworx BA75 4 User Manual
Celestron Advanced Series C8 S User Manual
Citizen Calculator SLD 200N User Manual
Cuisinart DLC XP User Manual
Cuisinart SPB 6SS User Manual
DeLonghi DFP690 Series User Manual
Dual XD1228 User Manual
JVC CS AW7220 User Manual
JVC GR SXM536 User Manual