Blaupunkt LAS VEGAS 7 645 650 310 User Manual

Radio / DVD / CD / MP3 / WMA  
Las Vegas DVD35  
7 645 650 310  
Operating instructions  
CONTROLS  
1
Button to switch the device on/  
off and operate the volume  
mute feature.  
OFF button on the remote con-  
trol for switching the device off.  
9
:
Buttons 1 - 6.  
AUD•DEQ button (Audio).  
Short press: Sets bass, treble,  
balance, fader and X-bass.  
Long press: Calls up the equal-  
izer menu.  
2
button to open the flip-re-  
lease control panel.  
;
SRC button to switch sources  
between CD/DVD, Tuner, CD  
changer (if connected) and  
AUX.  
3
4
Volume control.  
BNDTS button.  
Short press: Selects the FM  
memory banks and the MW  
and LW wavebands.  
Long press: Starts the FM Trav-  
elstore function.  
<
=
SETUP button to call up the  
setup menu of the DVD player.  
MENU button to call up the  
main menu (root menu) of a  
DVD.  
5
6
7
DIS•ESC button to change the  
display contents, to close the  
menus without saving changes.  
>
ENTER button to confirm menu  
entries on DVDs and in the set-  
up menu.  
Arrow buttons on the remote  
control and the device with  
identical function.  
?
@
MUTE button to mute the de-  
vice.  
MENU•OK button  
buttons to start the fast  
forward/reverse search, to con-  
trol slow-motion in DVD mode.  
Short press: Calls up the men-  
us for basic settings and con-  
firms menu entries. Confirms  
menu entries in DVD menus.  
Long press: Starts the scan  
function.  
A
B
button to start and interrupt  
(freeze frame) the DVD play-  
back.  
GOTO button for direct selec-  
tion of playing time or title on a  
CD/DVD, selecting playing time,  
chapter or title on a DVD.  
8
TRAF button to switch traffic in-  
formation standby on/off.  
68  
CONTROLS  
C
D
E
DISPLAY button to display  
playing time information on the  
external display.  
M
N
O
P
AUDIO button to select the au-  
dio track of a DVD.  
SUB-T button to select the sub-  
titles of a DVD.  
ANGLE button to select a cam-  
era perspective (dependent  
upon the DVD).  
STOP button to interrupt the  
playback.  
TV MODE button to switch the  
TV standard of the DVD player  
to adjust to the external display.  
button for up and down  
track selection in CD mode and  
to select the previous or next  
chapter in DVD mode, single-  
frame search in DVD mode.  
F
G
H
ZOOM button to zoom the im-  
age area in/out.  
DIMMER button to directly call  
up the display menu.  
Q
RETURN button to change  
back one level in the menu of a  
DVD.  
AUDIO ONLY button  
No function  
R
S
TITLE button to call up the title  
menu of a DVD.  
I
J
PBC button, playback control.  
Numeric keys for direct selec-  
tion of chapters and playing  
time in DVD mode or MP3  
mode.  
PLAY MODE button for setting  
the repeat mode (REPEAT) of a  
CD or DVD.  
K
L
PROGRAM button to program  
the playlist of a CD or DVD.  
button to eject a CD from the  
device (visible only with opened  
control panel).  
A-B button to define and repeat  
a self-defined title of a DVD/CD.  
69  
CONTENTS  
Scanning receivable stations  
Notes and accessories ......... 73  
Road safety................................. 73  
Installation.................................... 73  
Remote control RC 14 H ............. 73  
Installations  
(not part of the scope of delivery) ... 74  
Activating/deactivating  
demo mode.................................. 74  
Time-out (time window) ................ 74  
(SCAN)........................................ 83  
Setting the scanning time............. 83  
Programme type (PTY) ................ 83  
Optimising radio reception ........... 85  
SHARX ........................................ 85  
Configuring the display ................ 85  
Activating/deactivating the radio  
text display ................................... 86  
Traffic information ................ 86  
Switching traffic information  
priority on/off ............................... 86  
Setting the volume for traffic  
Detachable control panel ..... 75  
Theft protection............................ 75  
Detaching the control panel ......... 75  
Attaching the control panel .......... 76  
announcements............................ 87  
Switching on/off ................... 76  
DVD operation ...................... 87  
Region code ................................ 87  
License ........................................ 88  
Switching to DVD mode............... 88  
Starting playback ......................... 88  
Display ......................................... 89  
Fast forward/reverse search ........ 89  
Slow motion ................................. 90  
Single frame................................. 90  
Freeze frame................................ 90  
Interrupting playback ................... 90  
Skipping a chapter ....................... 90  
Repeated playback of a DVD title. 91  
Direct selection of a chapter ........ 91  
Resuming playback at the start  
Adjusting the volume............ 77  
Setting the power-on volume........ 77  
Quickly reducing the volume  
(Mute) .......................................... 78  
Telephone audio/navigation audio ..78  
Setting the volume of the  
confirmation beep ........................ 79  
Automatic sound .......................... 80  
Radio mode........................... 80  
Switching to radio mode .............. 80  
Convenient RDS functions  
(AF, REG) .................................... 80  
Selecting the waveband /  
memory bank ............................... 81  
Tuning into a station ..................... 81  
Setting the sensitivity of  
station seek tuning ....................... 82  
Storing stations ............................ 82  
Storing stations automatically  
of the first title of a DVD ............... 92  
Displaying subtitles ...................... 92  
Selecting the playback language.. 93  
Changing the camera perspective .. 93  
Zooming in/out of an image area .. 93  
Traffic announcements in  
(Travelstore) ................................. 82  
Listening to stored stations .......... 83  
DVD mode ................................... 94  
70  
CONTENTS  
Programming your favourite track  
with the remote control .............. 107  
Traffic announcements in  
CD mode ................................... 108  
Ejecting a CD ............................ 108  
DVD menu............................. 94  
Displaying the DVD menu ............ 94  
Selecting menu entries ................ 95  
Exiting the DVD menu .................. 95  
Displaying the title menu .............. 95  
Playback of DVD audio ................ 95  
Repeated playback of a defined  
section of a title............................ 95  
Programming your favourite track  
with the remote control ................ 96  
MP3/WMA mode ................. 109  
Preparing an MP3/WMA CD ..... 109  
Switching to MP3 mode............. 110  
Setting the display  
(internal display)......................... 111  
Selecting the directory  
on the device ............................. 111  
Selecting a track on the device .. 112  
Selecting a directory/track  
with the remote control .............. 112  
Fast search ................................ 113  
Random track play – MIX ........... 113  
Scanning tracks – SCAN ........... 114  
Repeated playback of individual  
tracks or entire directories –  
DVD setup............................. 97  
Calling up the setup menu ........... 97  
Performing settings in the setup  
menu............................................ 97  
General Setup - general settings . 97  
Audio Setup ................................. 98  
Video Setup - image settings ....... 99  
Preferences - preferred settings 100  
Setting password protection -  
Assigning a password................ 102  
Exiting the setup menu ............... 102  
REPEAT ..................................... 114  
Repeated playback of a defined  
section of a title.......................... 114  
Interrupting playback (PAUSE)... 115  
Selecting MP3 info .................... 115  
Displaying scrolling texts (scroll) ...115  
CD mode ............................. 103  
Switching to CD mode............... 103  
Selecting tracks ......................... 103  
Direct track selection with the  
remote control............................ 104  
Fast track selection.................... 104  
Fast searching (audible)............. 104  
Random track play (MIX)............ 105  
Scanning tracks (SCAN) ........... 105  
Repeating tracks (REPEAT) ....... 105  
Repeated playback of a defined  
section of a title.......................... 106  
Interrupting playback (PAUSE)... 106  
Changing the display ................. 106  
Displaying CD text ..................... 107  
71  
CONTENTS  
CD-changer mode .............. 116 Equalizer ............................. 122  
Switching to CD-changer mode . 116 Switching the equalizer on/off .... 122  
Selecting CDs ........................... 116 Selecting sound presets ............ 123  
Selecting tracks ......................... 116 Selecting vehicle presets ........... 123  
Fast searching (audible)............. 116 Manually adjusting the equalizer . 124  
Changing the display ................. 116 Help adjusting the equalizer ....... 125  
Repeating individual tracks or  
Adjusting the display  
whole CDs (REPEAT) ................ 117  
settings ............................... 126  
Random track play (MIX)............ 117  
Adjusting the display brightness. 126  
Scanning all tracks on all CDs  
Adjusting the viewing angle........ 126  
(SCAN)...................................... 117  
External audio sources ....... 127  
Switching the AUX input on/off .. 127  
Naming CDs .............................. 118  
CLOCK time ........................ 119  
Displaying the time..................... 119  
Setting the clock automatically ... 119  
Setting the clock manually ......... 119  
Selecting 12/24-hour  
Amplifier/sub-out ............... 128  
Switching the internal amplifier  
on/off ......................................... 128  
Switching the dual zone on/off ... 128  
clock mode ................................ 120  
Displaying the time continuously  
when the device is off and the  
TMC for dynamic navigation  
systems............................... 129  
Specifications ..................... 129  
Amplifier .................................... 129  
Tuner.......................................... 129  
DVD ........................................... 129  
CD ............................................. 129  
Pre-amp out ............................... 129  
Input sensitivity .......................... 129  
ignition is on............................... 120  
Sound.................................. 121  
Adjusting the bass ..................... 121  
Adjusting the treble .................... 121  
Setting the left/right volume  
distribution (balance).................. 121  
Adjusting the front/rear volume  
distribution (fader)...................... 121  
X-BASS ............................... 122  
72  
NOTES AND ACCESSORIES  
Notes and accessories  
Thank you for choosing a Blaupunkt  
product. We hope you enjoy using this  
new piece of equipment.  
Note that due to road safety, the driv-  
er should be viewing videos only  
while the vehicle is standing.  
Installation  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
If you want to install your car sound  
system yourself, please read the instal-  
lation and connection instructions that  
follow these operating instructions.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the de-  
vice, please contact your dealer or the  
telephone hotline for your country. You  
will find the telephone number printed  
at the back of this booklet.  
Remote control RC 14 H  
When you operate the Las Vegas  
DVD35 for the first time, you must in-  
sert the batteries in the remote con-  
trol.  
Inserting the batteries  
1. Open the battery compartment by  
removing the cover.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
2. Battery size: Two AAA batteries,  
type LR03 Micro.  
Before inserting the batteries, en-  
sure that the poles of the battery  
are aligned as shown in the bat-  
tery compartment.  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
D-31139 Hildesheim  
Insert the batteries.  
3. Close the battery compartment.  
Road safety  
Note:  
Exhausted batteries do not belong  
in household waste; they should  
be disposed of according to local  
regulations.  
Road safety has absolute  
priority. Only operate your car sound  
system if the road and traffic  
conditions allow you to do so.  
Familiarise yourself with the device  
before setting off on your journey.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time from inside your vehicle.  
For this reason, listen to your car  
sound system at a suitable volume  
level during your journey.  
73  
NOTES AND ACCESSORIES  
External display  
Activating the remote control  
An external display is required to  
view DVD movies and VCDs. You  
can obtain further information  
about suitable monitors from your  
Blaupunkt dealer.  
Point the remote control at the infrared  
receiver in the front of the device.  
Operating angle: Approx. 30° in each  
direction from the front side of the IR  
receiver in the front of the device.  
Amplifiers  
You can use all Blaupunkt and Ve-  
locity amplifiers.  
The accompanying remote control al-  
lows for operating all the functions of  
the DVD mode and controlling the ba-  
sic functions of the other operating  
modes.  
CD changers  
You can connect the following  
Blaupunkt CD changers:  
You cannot switch the device on/off us-  
ing the accompanying remote control.  
CDC A 03, CDC A 08 and  
IDC A 09.  
Installations  
(not part of the scope of delivery)  
Activating/deactivating demo  
mode  
You can activate the demo mode at the  
device. In demo mode, the different  
functions of the device are displayed.  
Use only accessories approved by  
Blaupunkt.  
Remote controls  
The RC 10 steering wheel remote  
control allows you to access the  
most important functions of your  
car sound system safely and con-  
veniently from your steering  
wheel.  
Press the MENU•OK button 7.  
The display shows the menu.  
Press and hold the MENU•OK  
button 7 pressed for more than  
four seconds while the menu is  
displayed to activate or deactivate  
the demo mode.  
You cannot switch the device on/  
off using the remote control.  
The RC 13 H cable remote control  
and the corresponding adapter al-  
lows for controlling the RSA (Rear  
Seat Entertainment) in the dual  
zone mode. You can obtain further  
information from your Blaupunkt  
dealer.  
Time-out (time window)  
The device features a time-out func-  
tion.  
For example, if you press the  
MENU•OK button 7 and select a  
menu item, the device switches back  
after approx. 16 seconds after the last  
button activation. The settings per-  
formed are saved.  
74  
CONTROL PANEL  
Detaching the control panel  
Detachable control panel  
Press the  
button 2.  
Theft protection  
The control panel opens out towards  
you.  
The device is equipped with a detach-  
able control panel (flip-release panel)  
as a way of protecting your equipment  
against theft. The device is worthless  
to a thief without this control panel.  
Hold the control panel by its right  
side and then pull it straight out of  
the bracket.  
Protect your device against theft by  
taking the control panel with you when-  
ever you leave your vehicle. Do not  
leave the control panel inside your ve-  
hicle - not even in a hiding place.  
The control panel has been designed  
to be easy to use.  
Notes:  
Notes:  
All the current settings are saved.  
Never drop the control panel.  
Any inserted DVD/CD remains in  
Never expose the control panel  
to direct sunlight or other heat  
sources.  
the device.  
The device switches off automati-  
cally after approx. one minute.  
Avoid direct skin contact with the  
control panel’s electrical contacts.  
If necessary, please clean the  
contacts of the KeyCard with a  
lint-free cloth moistened with  
cleaning alcohol.  
75  
CONTROL PANEL  
SWITCHING ON/OFF  
Attaching the control panel  
Switching on/off  
Hold the control panel at approxi-  
There are various ways of switching the  
device on/off:  
mately right angles to the device.  
Slide the control panel into the de-  
vice’s guides that are positioned  
on the left and right at the lower  
edge of the housing. Push the  
control panel carefully into the  
bracket until it clicks into place.  
Switching on/off using the vehicle  
ignition  
The device will switch on/off simulta-  
neously with the ignition if the device  
is correctly connected to the vehicle’s  
ignition and you did not switch the de-  
vice off by pressing button 1.  
Flip up the control panel and care-  
fully press it into the device until it  
clicks into place.  
Switching the device on/off using  
the detachable control panel  
Detach the control panel.  
The device switches off automatically  
after approx. one minute.  
2.  
Attach the control panel again.  
1.  
The device switches on. The last set-  
ting (radio, DVD/CD, CD changer or  
AUX) will be reactivated.  
Note:  
When attaching the control panel,  
make sure you do not press the  
display.  
Switching on/off using button 1  
To switch on the device, press but-  
ton 1.  
If the device was still switched on when  
you detached the control panel, it will  
automatically switch on with the last  
setting activated (radio, DVD/CD, CD  
changer or AUX) when the panel is  
replaced.  
To switch off the device, press and  
hold down button 1 for longer  
than two seconds.  
The device switches off.  
Note:  
To protect the vehicle battery, the  
device will switch off automatically  
after one hour if the ignition is off.  
76  
SWITCHING ON/OFF  
ADJUSTING THE VOLUME  
Adjusting the volume  
Switching the device off with the  
remote control  
Note:  
The device can also be switched off  
using the supplied RC 14 H remote  
control.  
The internal amplifier can be  
switched off. If the loudspeakers  
do not emit any sound, please  
read the section entitled “Switch-  
ing the internal amplifier on/off”  
in the “Amplifier” chapter.  
Press the OFF button 1 on the  
remote control.  
The device switches off.  
You can adjust the volume in steps from  
0 (off) to 50 (maximum).  
To increase the volume,  
turn the volume control 3 clock-  
wise.  
To decrease the volume,  
turn the volume control 3 coun-  
terclockwise.  
Adjusting the volume with the  
remote control  
The volume can also be adjusted us-  
ing the supplied remote control.  
To increase the volume, press the  
VOL+ button 3 on the remote  
control.  
To decrease the volume, press the  
VOL- button 3 on the remote  
control.  
Setting the power-on volume  
You can set the default volume level at  
which the device plays when it is  
switched on.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
77  
ADJUSTING THE VOLUME  
Press the MENU•OK button 7  
Quickly reducing the volume  
(Mute)  
to display the volume menu.  
“ON VOLUME” and the currently set  
value are displayed or “LAST VOL-  
UME” is displayed.  
You can quickly reduce the volume to  
a preset level (Mute).  
Briefly press button 1.  
Adjust the power-on volume using  
“MUTE” appears on the display.  
the  
buttons 6.  
Cancelling mute  
To help you adjust the setting more  
easily, the device will increase or de-  
crease the volume as you make your  
changes.  
To return to your previously set volume  
level,  
briefly press button 1 again.  
If you change the setting to “LAST  
VOLUME”, the volume when the de-  
Muting with the remote control  
vice switches on will be the same as The volume can also be muted using  
the volume level that was set the last the supplied remote control.  
time you switched the device off.  
Press the MUTE button ? on the  
remote control.  
Danger to hearing!  
If the power-on volume is set to  
“MUTE” appears on the display.  
maximum, the volume level can be  
very high when the device is  
To return to your previously set volume  
switched on.  
Cancelling mute  
level,  
If the volume was set to maximum  
press the MUTE button ? again.  
before the device was switched off  
and the power-on volume is set to  
“LAST VOLUME”, the volume level  
can be very high when the device is  
switched on again.  
Severe damage to your hearing can  
be caused in both cases!  
Telephone audio/navigation  
audio  
If your car sound system is connected  
to a mobile telephone or a navigation  
system, the sound system’s volume will  
be muted as soon as you “pick up” the  
phone or as soon as a navigation an-  
nouncement is made. You will then hear  
the caller or navigation announcement  
over the car sound system’s loud-  
speakers. In order for this feature to  
work, the mobile telephone or naviga-  
tion system must be connected to the  
car sound system as described in the  
installation instructions.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
78  
ADJUSTING THE VOLUME  
You will need a cable for this with the Note:  
following Blaupunkt number:  
7 607 001 503.  
You can use the volume control  
3 to adjust the volume of tele-  
phone calls and navigation an-  
nouncements whilst you are lis-  
tening to them.  
You can find out from your Blaupunkt  
dealer which navigation systems can  
be used with your car sound system.  
If the sound system receives a traffic  
announcement during a telephone call  
or whilst a navigation announcement is  
being made, you will only be able to hear  
the traffic announcement after the call  
or navigation announcement is finished  
(in so far as the traffic announcement is  
still being broadcast). The traffic an-  
nouncement is not recorded!  
Setting the volume of the  
confirmation beep  
The system will output a confirmation  
beep for some functions if you keep a  
button pressed down for longer than  
approx. two seconds, for instance,  
when assigning a radio station to a sta-  
tion preset button. You can adjust the  
volume of this beep.  
The volume with which telephone calls  
or navigation announcements are  
broadcast can be adjusted.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “VOLUME MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
Press the MENU•OK button 7  
to display the volume menu.  
Press the or button 6  
repeatedly until “BEEP VOL”  
appears on the display.  
Press the MENU•OK button 7  
to display the volume menu.  
Press the or button 6  
repeatedly until “TEL/NAVI” appears  
on the display.  
Adjust the volume using the  
buttons 6. “0” means that the  
beep is deactivated, “6” means that  
the maximum beep volume is set.  
Set your preferred volume level  
using the  
buttons 6.  
When you have finished making your  
changes,  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
79  
ADJUSTING THE VOLUME  
RADIO MODE  
Automatic sound  
Radio mode  
This feature automatically adjusts the  
volume of the car sound system to suit  
the speed at which the vehicle is trav-  
elling. In order for this to work, your car  
sound system must be connected as  
described in the installation instruc-  
tions.  
This device is equipped with an RDS  
radio receiver. Many of the receivable  
FM stations broadcast a signal that not  
only carries the programme but also  
additional information such as the sta-  
tion name and programme type (PTY).  
The station name appears on the dis-  
play as soon as the tuner receives it.  
You can adjust the automatic volume  
boost feature in six steps from (0 to 5).  
Switching to radio mode  
To start the radio mode,  
press the BNDTS button 4  
or  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “TUNER” appears on the dis-  
play.  
Press the MENU•OK button 7  
to display the volume menu.  
Press the or button 6  
repeatedly until “AUTO SOUND”  
appears on the display.  
Convenient RDS functions  
(AF, REG)  
Set the volume adjustment level  
using the  
buttons 6.  
When you have finished making your  
changes,  
The convenient RDS functionsAF (Al-  
ternative Frequency) and REGIONAL  
extend your radio’s range of functions.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
AF: If the RDS function is activat-  
ed, the radio automatically tunes  
into the best receivable frequency  
for the station that is currently set.  
Note:  
The optimum setting for the speed-  
dependent volume adjustment fea-  
ture depends on how noise levels  
develop in your particular vehicle.  
You will need to test various set-  
tings in order to find out which is  
best suited to your vehicle.  
REGIONAL: At certain times,  
some radio stations divide their  
programme into regional pro-  
grammes providing different con-  
tent. You can use the REG func-  
tion to prevent the car radio from  
switching to alternative frequen-  
cies that are transmitting different  
programme content.  
80  
RADIO MODE  
Note:  
REGIONAL must be activated/de-  
Selecting the waveband /  
memory bank  
activated separately in the menu.  
This device can receive programmes  
broadcast over the FM frequency range  
as well as the MW and LW (AM) wave-  
bands. There are three memory banks  
available for the FM waveband (FM1,  
FM2 and FMT) and one for each of the  
MW and LW wavebands.  
Switching REGIONAL on/off  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
Press the MENU•OK button 7 to  
display the tuner menu.  
Five stations can be stored in each  
memory bank.  
Press the or button 6  
repeatedly until “REG” appears  
on the display. “OFF” or “ON” is  
displayed alongside “REG”.  
To switch between the FM memory  
banks (FM1, FM2 and FMT) and the  
MW and LW wavebands,  
To switch REGIONAL on/off, press  
briefly press the BNDTS button  
the or button 6.  
4.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Tuning into a station  
There are various ways of tuning into  
a station.  
Switching the RDS function on/off  
Automatic station seek tuning  
If you want to use the RDS functions  
(AF and REGIONAL),  
Press the or button 6.  
press the MENU•OK button 7.  
The radio tunes into the next receiva-  
ble station.  
“TUNER MENU” appears on the dis-  
play.  
Tuning into stations manually  
Press the MENU•OK button 7 to  
You can also tune into stations manually.  
display the tuner menu.  
Note:  
“RDS ON” or “RDS OFF” appears on  
the display.  
You can only tune into stations  
manually if the RDS function is  
deactivated.  
To switch RDS on/off, press the  
or button 6.  
Press the or button 6.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
The convenient RDS functions are ac-  
tive if the RDS appears on the display.  
81  
RADIO MODE  
ity setting. “SENS LO1” means it is set  
to the lowest sensitivity setting.  
Browsing through broadcasting  
networks (only FM)  
Set the sensitivity level that you  
If a radio station provides several pro-  
grammes, you have the option of  
browsing through its so-called “broad-  
casting network”.  
want using the  
buttons 6.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
The RDS function must be activat-  
ed before you can use this feature.  
Press the or button 6 to  
switch to the next station on the  
broadcasting network.  
Note:  
You can set different sensitivity  
levels for FM and MW or LW (AM).  
Note:  
Storing stations  
When using this feature, you will  
only be able to switch to stations  
that you have received previously.  
To receive the stations, use the  
Scan or Travelstore function.  
Storing stations manually  
Select the memory bank that you  
want (FM1, FM2, FMT) or one of  
the wavebands (MW or LW).  
Tune into the station that you  
Setting the sensitivity of station  
seek tuning  
want.  
Press and hold down one of the  
station buttons 1 - 6 9 for longer  
than two seconds to assign the  
station to that button.  
You can choose whether the radio  
should only tune into stations provid-  
ing good reception or whether it can  
also tune into those with a weak re-  
ception.  
Storing stations automatically  
(Travelstore)  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
You can automatically store the six sta-  
tions offering the strongest reception  
in the region (FM only). The stations  
are stored in the FMT memory bank.  
Press the MENU•OK button 7 to  
display the tuner menu.  
Note:  
Press the or button 6  
repeatedly until “SENS” appears  
on the display.  
Any stations that were previously  
stored in this memory bank are  
deleted in the process.  
The display shows the currently set  
sensitivity level. “SENS HI3” means that  
the tuner is set to the highest sensitiv-  
Press and hold down the BND•TS  
button 4 for longer than two sec-  
onds.  
82  
RADIO MODE  
The storing procedure begins. “TRAV-  
EL STORE PLEASE WAIT” appears  
on the display. After the process has  
completed, the radio will play the sta-  
tion that is stored in memory location  
1 of the FMT memory bank.  
Setting the scanning time  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
Listening to stored stations  
Select the memory bank or wave-  
Press the MENU•OK button 7 to  
display the menu. „SCAN TIME“  
and the currently set time are dis-  
played.  
band.  
Press the station button 1 - 6 9  
of the desired station.  
Set the scanning time that you  
Scanning receivable stations  
(SCAN)  
You can use the scan function to play  
all the receivable stations briefly. You  
can set the scanning time from 5 to 30  
seconds in the menu in increments of  
five seconds.  
want using the  
buttons 6.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
Starting SCAN  
The defined scanning time is also  
applied by the system to scanning  
carried out in DVD/CD and CD-  
changer mode.  
Press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
Scanning begins. “SCAN” appears  
briefly on the display followed by a dis-  
play of the current station name or fre-  
quency.  
Programme type (PTY)  
Besides transmitting the station name,  
some FM stations also provide infor-  
mation on the type of programme that  
they are broadcasting. Your car radio  
can receive and display this informa-  
tion.  
Cancelling SCAN and continuing  
listening to a station  
Press the MENU•OK button 7.  
Scanning stops and the radio contin-  
ues playing the station that it tuned into  
last.  
For example, the programme types can  
be:  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
83  
RADIO MODE  
You can use the PTY function to se- Press the or button 6 to  
lect stations of a particular programme  
type.  
switch PTY ON or OFF.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
PTY-EON  
If you specify the programme type and  
start seek tuning, the radio will switch  
from the current station to a station of  
the selected programme type.  
Selecting a programme type and  
starting seek tuning  
Press the or button 6.  
Notes:  
The programme type that you select-  
ed last appears on the display.  
If the tuner does not find a station  
that corresponds to the selected pro-  
gramme type, you will hear a beep  
and “NO PTY” appears briefly on the  
display. The radio will then retune to  
the station that it received last.  
If you want to select another pro-  
gramme type, you can do so by  
pressing the or button 6  
whilst this display is visible.  
Or  
If the tuned radio station or another  
station on the broadcasting net-  
work broadcasts your selected pro-  
gramme type at a later point in  
time, the radio will automatically  
switch from the currently tuned sta-  
tion or from DVD/CD or CD-chang-  
er mode to the station whose pro-  
gramme type matches the one you  
selected.  
Press one of the buttons 1 - 6 9  
to select a programme type that is  
assigned to one of these buttons.  
The selected programme type appears  
briefly in the display.  
Press the or button 6 to  
start seek tuning.  
The radio will then tune into the next  
station that it finds that corresponds to  
your selected programme type.  
Switching PTY on/off  
Press the MENU•OK button 7.  
Assigning a programme type to a  
station button  
“TUNER MENU” appears on the dis-  
play.  
Select a programme type using  
Press the MENU•OK button 7 to  
the or button 6.  
display the tuner menu.  
Press and hold the desired station  
button 1 - 6 9 for longer than two  
seconds.  
Press the or button 6 re-  
peatedly until “PTY” appears on  
the display with the current setting.  
The programme type is stored on the  
selected button 1 - 6 9.  
84  
RADIO MODE  
Switching SHARX on/off  
Optimising radio reception  
Press the MENU•OK button 7.  
Treble reduction feature during  
interference (HICUT)  
“TUNER MENU” appears on the dis-  
play.  
The HICUT function improves recep-  
tion during poor radio reception (only  
FM). If reception interferences are  
present, the interference level is auto-  
matically reduced.  
Press the MENU•OK button 7 to  
display the tuner menu.  
Press the or button 6 re-  
peatedly until “SHARX” appears  
on the display.  
Switching HICUT on/off  
Press the or button 6 to  
Press the MENU•OK button 7.  
switch SHARX on/off.  
“TUNER MENU” appears on the dis-  
play.  
„SHARX OFF“ means automatic band-  
width switching is deactivated, “SHARX  
ON” means it is activated.  
Press the MENU•OK button 7 to  
display the tuner menu.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the or button 6 re-  
peatedly until “HICUT” appears on  
the display.  
Configuring the display  
In radio mode, you can choose  
between various display modes.  
Press the or button 6 to ad-  
just the HICUT setting.  
“HICUT 0” means that no automatic  
reduction of the interference level will  
be made; “HICUT 2” means that a  
maximum reduction will be made.  
1. “NORMAL MODE”  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: Frequency of the se-  
lected station or radio text (if acti-  
vated).  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
2. “CLOCK MODE”  
SHARX  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: Frequency of the se-  
lected station or radio text (if acti-  
vated) and time.  
The SHARX function allows you to  
largely avoid interference caused by  
neighbouring radio stations (FM only).  
Switch on the SHARX function if the  
density of radio stations in your area is  
very high.  
3. “MINIMAL MODE”  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: No display.  
85  
RADIO MODE  
TRAFFIC INFORMATION  
Traffic information  
Your device is equipped with an RDS-  
EON receiver. EON stands for En-  
hanced Other Network.  
Briefly press the DIS•ESC button  
5 to switch between the options.  
Activating/deactivating the  
radio text display  
Whenever a traffic announcement (TA)  
is broadcast, the system switches au-  
tomatically from a station that does not  
provide traffic reports to the appropri-  
ate traffic information station within the  
broadcasting network that does.  
Some stations use the RDS signal to  
broadcast scrolling texts known as ra-  
dio texts. You can allow radio texts to  
be displayed or you can block them.  
Since displaying radio texts can distract  
you from the current road and traffic  
situation, we ask you kindly to deacti-  
vate the “radio text” function or to use it  
only whilst the vehicle is stationary.  
Once the traffic report has been played,  
the system will switch back to the pro-  
grammethatyouwerelisteningtobefore.  
Press the MENU•OK button 7.  
Switching traffic information  
priority on/off  
Press the TRAF button 8.  
“TUNER MENU” appears on the dis-  
play.  
Press the MENU•OK button 7 to  
The priority for traffic announcements  
is activated if the display shows the traf-  
fic jam symbol.  
display the tuner menu.  
Press the or button 6 re-  
peatedly until “R-TEXT” appears  
on the display.  
Notes:  
You will hear a warning beep:  
Press the or button 6 to  
If you leave the reception area of  
a traffic information station that  
you are currently listening to.  
switch RADIOTEXT on/off.  
“R-TEXT OFF” means that no radio  
texts will be displayed and “R-TEXT  
ON” means they will be displayed.  
If you leave the reception area of  
a traffic information station that the  
system is tuned into while listening  
to a DVD/CD or a CD in the  
changer, and the subsequent au-  
tomatic search cannot find a new  
traffic information station.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
If you retune the radio from a traffic  
information station to a station that  
does not broadcast traffic information.  
If you hear the warning beep, you can  
either switch off traffic information pri-  
ority or tune into a station that broad-  
casts traffic information.  
86  
TRAFFIC INFORMATION  
DVD OPERATION  
Setting the volume for traffic  
announcements  
Press the MENU•OK button 7.  
DVD operation  
Risk of severe damage to the  
DVD/CD drive!  
Mini DVDs/CD singles with a diam-  
eter of 8 cm and non-circular con-  
toured DVDs/CDs (shape CDs)  
must not be used.  
We accept no responsibility for any  
damage to the DVD/CD drive that  
may occur as a result of the use of  
unsuitable DVDs/CDs.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
Press the MENU•OK button 7 to  
display the volume menu.  
Press the or button 6 re-  
peatedly until “TRAFFIC” appears  
on the display.  
Region code  
Code Region  
Adjust the volume using the  
buttons 6.  
1
NorthAmerica, incl. the US and  
Canada.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
2
Japan, Europe (excl. Eastern  
Europe), Middle East, South  
Africa.  
Note:  
Using the volume control 3, you  
can also adjust the volume during  
a traffic announcement for the du-  
ration of that announcement.  
3
4
Korea and South-East Asia.  
Oceania incl. Australia, New  
Zealand, Central and South  
America.  
5
India, Eastern Europe, Africa,  
and Russia.  
6
China.  
All  
regions.  
The Las Vegas DVD35 and the DVDs  
are labelled with the region code that  
is applicable for the pertinent country.  
This device is permanently set to the  
region code that is valid for the country  
in which it was sold.  
Playing a DVD with a different region  
code is not possible.  
87  
DVD OPERATION  
This device can be used to play the Gently insert the DVD with its  
following data carriers/data formats:  
printed side pointing up into the  
drive until you feel some resist-  
ance.  
DVD video and DVD audio. DVD-  
MP3/WMA  
The drive draws in the DVD automati-  
cally.  
Video CD (VCD).  
MP3/WMA CDs, see the chapter  
“MP3/WMA mode”.  
You must not hinder or assist the drive  
as it draws in the DVD.  
Audio CDs, see the chapter “CD  
mode”.  
Gently close the control panel  
whilst exerting a little pressure un-  
til you feel it click into place.  
License  
Manufactured under license of Dolby  
Laboratories. “Dolby”, “Pro Logic” and  
the double-D symbol are trademarks  
of Dolby Laboratories.  
The DVD data are loaded.  
Dependent upon the inserted DVD, the  
playback starts or the DVD menu dis-  
plays.  
This product contains technologies that  
are copyright-protected under certain  
US-American patents. The copyrights  
are property of Macrovision Corpora-  
tion and other copyright owners. The  
use of this copyright-protected technol-  
ogy must be approved by Macrovision  
Corporation and is intended exclusively  
for private use and other presentations  
in a limited scope, unless Macrovision  
Corporation first issued a respective  
permission.  
If a DVD is already inserted in the  
drive,  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “DVD” appears on the display.  
Playback begins from the point at which  
it was last interrupted.  
Starting playback  
After the desired DVD/VCD is loaded,  
either the DVD menu is displayed or  
the playback starts. This action is de-  
pendent upon the inserted DVD.  
Switching to DVD mode  
If there is no DVD inserted in the  
drive,  
Press the button A or move  
the selection mark to the menu  
item that starts the movie, and  
press the ENTER button > to  
start the playback.  
switch on the device by pressing  
button 1.  
Press the button 2.  
The control panel opens.  
The DVD starts playing.  
88  
DVD OPERATION  
Showing/changing the display  
information  
Display  
Different information about the playing  
time can be shown on the connected  
display. The display can be hidden.  
Press the DISPLAY button C on  
the remote control repeatedly until  
the desired information is dis-  
played.  
The following displays are available:  
TITLE ELAPSED  
The display information is shown at the  
top edge of the display.  
Example: TITLE 01/12 CHAP-  
TER 08/26 01 : 26 : 14: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the time elapsed of the  
current title.  
Hiding the display information  
Press the DISPLAY button C  
repeatedly until DISPLAY OFF  
displays briefly and the display in-  
formation is hidden.  
TITLE REMAIN  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 31 : 58: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the time remaining of  
the current title.  
Fast forward/reverse search  
You can fast forward or reverse the  
DVD at 2x, 4x, 8x, 16x and 32x the  
speed (dependent upon the DVD;  
some DVDs can only be played up to  
16x the speed).  
CHAPTER ELAPSED  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 01 : 34: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the elapsed playing  
time of the current chapter.  
To fast forward or reverse search the  
DVD,  
press the  
or  
@ button on  
the remote control repeatedly until  
the desired speed is displayed.  
Stopping fast forward/reverse  
search  
CHAPTER REMAIN  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 05 : 22: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the remaining playing  
time of the current chapter.  
To stop fast forward,  
press the button A on the  
remote control.  
The DVD is played back at normal  
speed.  
89  
DVD OPERATION  
Slow motion  
Freeze frame  
The DVD can be played forward or During playback, press the but-  
reverse at reduced speed.  
ton A on the remote control or  
the button 6 9 on the device.  
First, press the button A on  
the remote control.  
The playback is interrupted and shown  
as a freeze frame.  
Press the SLOW button @  
once or several times on the remote  
control for forward slow motion  
Continuing playback  
To continue the playback  
or  
press the button A on the re-  
the SLOW button @ for  
mote control or the button 6  
9
reverse slow motion.  
on the device.  
After pressing the SLOW  
/
but-  
Interrupting playback  
Press the button O on the re-  
ton @ several times, the playback is  
switched to half the regular speed  
(1/2).  
mote control.  
The playback is interrupted, the start  
screen of the device and the text  
“PRESS PLAY TO CONTINUE” are  
displayed.  
With every additional press of the but-  
ton, the speed is reduced further (1/4,  
1/8 and 1/16).  
To play the DVD at regular speed  
again,  
Continuing playback  
press the button A on the re-  
press the button A on the re-  
mote control.  
mote control.  
Playback is continued again.  
Single frame  
You can stop the movie of a DVD and  
watch it in single frames.  
Skipping a chapter  
A title of the DVD can be divided into  
several smaller chapters.  
First, press the button A on  
the remote control.  
To jump to the next or another chapter,  
Press the STEP button P on  
the remote control once or several  
times to display the next frames  
press the button P once or  
several times on the remote con-  
trol.  
or  
The playback jumps to the beginning  
of the next or the corresponding follow-  
ing chapter.  
press the STEP button P to  
display the previous frames.  
90  
DVD OPERATION  
To jump to the beginning of the current  
or a previous chapter,  
Cancelling repeat  
If you want to cancel the repeat func-  
tion,  
press the button P once or  
several times on the remote con-  
trol.  
press the PLAY MODE button  
J on the remote control repeat-  
edly until the repeat symbol is no  
longer shown on the display.  
The playback jumps to the beginning  
of the current or the corresponding pre-  
vious chapter.  
Direct selection of a chapter  
Repeated playback of a DVD  
title  
A DVD is divided into different titles and  
chapters, which can be selected on an  
individual basis.  
The remote control can also be used  
to directly select a chapter or a specif-  
ic position (playing time).  
Selecting a chapter  
To directly select a chapter,  
Repeated playback of a chapter or  
title  
press the GOTO button B on the  
remote control.  
To repeat the current chapter,  
The external display shows the GOTO  
menu.  
press the PLAY MODE button J  
on the remote control.  
Move the selection mark with the  
buttons of the remote control  
6 to “CHAPTER”.  
The display shows the repeat symbol  
and “CHAPTER”.  
Press the ENTER button > on the  
To repeat the current title,  
remote control.  
press the PLAY MODE button J  
on the remote control a second  
time.  
Enter the three-digit number of the  
desired chapter using the numeric  
buttons 0 to 9 S on the remote  
control and press the ENTER but-  
ton >.  
The display shows the repeat symbol  
and “TITLE”.  
To repeat the entire DVD,  
Playback is continued at the desired  
position.  
press the PLAY MODE button J  
on the remote control a third time.  
To exit the GOTO menu and continue  
with full playback,  
The display shows the repeat symbol  
and “ALL”.  
press the GOTO button B on the  
remote control.  
91  
DVD OPERATION  
Selecting the playing time  
Resuming playback at the start  
of the first title of a DVD  
You can directly select a specific posi-  
tion on the DVD by specifying the play-  
ing time of this position either in the  
chapter or in the title.  
Press the  
button A on the re-  
mote control.  
Playback resumes at the start of the  
title.  
To jump to a specific position,  
press the GOTO button B on the  
Note:  
remote control.  
For most DVDs, this is the main  
menu (root) of the DVD.  
The external display shows the GOTO  
menu.  
Displaying subtitles  
To display subtitles,  
Move the selection mark with the  
buttons of the remote control  
6 to “TT TIME” to set the abso-  
lute playing time in the title, or to  
“CH TIME” to set the playing time  
of the current chapter.  
press the SUB-T button N on  
the remote control.  
The display information appears. The  
number of languages available for sub-  
titles and the current language are dis-  
played next to “SUBTITLE”.  
Press the ENTER button > on the  
remote control.  
Enter the desired position in  
hours, minutes and seconds using  
the numeric buttons 0 to 9 S on  
the remote control.  
To change the language of the subti-  
tles,  
press the SUB-T button N once  
or several times until the subtitles  
are displayed in the desired lan-  
guage.  
Playback is continued at the desired  
position.  
To exit the GOTO menu and continue  
with full playback,  
Note:  
You can also determine in the  
menu of the DVD whether and in  
which language subtitles are dis-  
played (see DVD menu).  
press the GOTO button B on the  
remote control.  
92  
DVD OPERATION  
Note:  
Selecting the playback  
language  
You can specify in the setup menu  
that a camera symbol is shown if  
additional camera perspectives are  
available. For further details, read  
the section “Displaying the camera  
perspective” in the “Setup” chapter.  
To select the playback language,  
press the AUDIO button M once  
or several times on the remote  
control.  
The display information is shown. The  
number of the language, the number  
of available playback languages and  
the current language are shown.  
Zooming in/out of an image  
area  
You can enlarge a freely selectable  
section of the movie being played up  
to 4 times or reduce it to one-fourth.  
Note:  
You can also select the playback  
language in the menu of the DVD  
(see DVD menu).  
To enlarge the image area,  
press the ZOOM button F once  
or several times on the remote  
control.  
Changing the camera  
perspective  
There are DVDs that offer two or  
more different camera perspectives  
for a scene.  
Every time you press the button, the  
central image area is enlarged incre-  
mentally.Available zoom levels are 2x,  
3x and 4x.  
The number of the current camera per-  
spective and the number of possible  
camera perspectives is shown in the  
display information next to the camera  
symbol.  
Note:  
After setting the desired zoom,  
you can freely move the image  
area with the arrow buttons 6 of  
the remote control.  
To change the camera perspective,  
Reducing the image area  
press the ANGLE button D on  
After the maximum zoom is reached,  
the image is reduced with each press  
of the ZOOM button F in increments  
of 1/2, 1/3 and 1/4.  
the remote control.  
The scene is shown from the next cam-  
era perspective. The display informa-  
tion is shown.  
93  
DVD OPERATION  
Deactivating zoom in/out  
DVD menu  
To continue viewing the movie without  
zoom,  
The DVD menu is offered by the insert-  
ed DVD. If you insert a DVD and play-  
back starts, the DVD menu automati-  
cally appears on the screen.  
press the ZOOM button F on  
the remote control repeatedly until  
the image is displayed without  
zoom in/out.  
Note:  
The selection options offered by  
the DVD menu are dependent  
upon the respective DVD.  
Traffic announcements in DVD  
mode  
If you wish to receive traffic announce-  
ments in DVD mode,  
The DVD menu of a DVD can offer the  
following:  
You can select from different lan-  
guages for the playback or the  
subtitles.  
press the TRAF button 8.  
The priority for traffic announcements  
is activated if the device display shows  
the traffic jam symbol. For further de-  
tails, please read the chapter entitled  
“Traffic information”.  
In addition to the actual movie,  
you can also view the trailer that  
was used in movie theatres or on  
television to promote the movie or  
view the “Making of ...” of the movie.  
A movie is divided into several se-  
quential chapters. You can select a  
chapter and directly start the play-  
back in the chapter without first  
having to “fast forward” to the cor-  
responding position like you have  
to with a video cassette.  
Displaying the DVD menu  
You can end the playback at any time  
and display the menu of the DVD.  
Press the MENU button = on  
the remote control.  
94  
DVD OPERATION  
Selecting menu entries  
Playback of DVD audio  
DVDs generally provide menus in  
which you can select among different  
options, such as “Start movie”, “Chap-  
ter selection”, etc.  
This device can also be used to play  
DVD audio. The functions described  
above can be used provided that the  
DVD supports them.  
To switch between the individual menu  
entries,  
The following functions are particularly  
useful for DVD audio.  
press one of the arrow buttons  
Repeated playback of a defined  
section of a title  
/
6 on the remote con-  
trol.  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
To confirm a menu entry,  
press the ENTER button > on  
the remote control.  
Note:  
Exiting the DVD menu  
This function is operable only if an  
external display is connected.  
When you make a corresponding se-  
lection in the DVD menu, e.g. the play-  
back of the movie, you automatically  
leave the DVD menu and the playback  
starts.  
To define the starting point of the sec-  
tion,  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to start.  
Displaying the title menu  
You can also call the title menu directly  
to conveniently select the individual ti-  
tles/chapters:  
To define the ending point of the sec-  
tion,  
listen to the title again and press  
the A-B button L on the remote  
control again at the point where  
you want the repeat function to  
end.  
Press the TITLE button R on the  
remote control.  
The title menu appears.  
Note:  
This function is not supported by  
all DVDs.  
The section of the title is repeated until  
you press the A-B button L again.  
95  
DVD OPERATION  
Stopping the playlist  
Programming your favourite  
track with the remote control  
To end a running playlist,  
In DVD mode, you can use the remote  
control to program a playlist of up to  
20 of your favourite tracks of the cur-  
rent DVD. The playlist is deleted when  
you remove the DVD or when you stop  
the playlist and exit the programming  
mode.  
press the PROGRAM button K  
on the remote control.  
The programming mode is displayed.  
The selection mark is positioned on  
“STOP”.  
To end the playback of the playlist,  
press the ENTER button >.  
Note:  
This function is operable only if an  
external display is connected.  
Note:  
You can also edit the playlist by  
moving the selection mark to indi-  
vidual memory locations and en-  
tering a different title with the nu-  
meric buttons.  
Defining and starting a playlist  
Press the PROGRAM button K  
on the remote control.  
The programming mode is displayed.  
The number of available titles on the  
DVD is displayed and the selection  
mark (green) is positioned at memory  
location 1.  
Enter the first title and the chapter  
of your playlist with the numeric  
buttons 0 to 9 S.  
Note:  
After entering the title, the chap-  
ters available for this title are dis-  
played.  
The selection mark moves to the next  
memory location.  
Enter the next titles and chapters  
of your playlist with the numeric  
buttons 0 to 9 S.  
If your playlist should have fewer than  
twenty titles,  
move the selection mark with the  
arrow buttons 6 to “START” and  
press the ENTER button >.  
96  
DVD OPERATION  
Confirm your entries with the EN-  
TER button > on the remote  
control.  
DVD setup  
The setup of the device offers a varie-  
ty of options to customise the device.  
If you want to perform additional set-  
tings in other sections of the menu:  
Calling up the setup menu  
To call up the setup menu,  
Press the button 6 of the re-  
mote control or the button 6 on  
the device to return to the selec-  
tion of the menu sections.  
press the SETUP button < on  
the remote control.  
Performing settings in the  
setup menu  
The setup menu is divided into five  
sections: General Setup,Audio Setup,  
Video Setup, Preference Page and  
Password Setup.  
To exit the setup menu,  
press the SETUP button < on  
the remote control.  
General Setup - general  
settings  
Select one of the five sections in  
the setup menu using the buttons  
6 of the remote control or  
In the general settings, you can define  
the type of connected display, display  
a symbol if more than one camera per-  
spective is available, switching captions  
on and off, and set the priority for au-  
dio or video DVDs.  
the arrow buttons on the device.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
Selecting the monitor setting  
The selection mark (yellow) is dis-  
played and positioned on the first en-  
try of the selected menu.  
The setting of the monitor is performed  
under the “TV Display” menu item.  
The following monitor settings are avail-  
able:  
Select the desired menu item us-  
ing the buttons  
6 of the re-  
Normal/LB: The DVD player is  
connected to a 4:3 monitor. The  
wide image is displayed on the  
screen at full width with black bars  
at the top and bottom edge of the  
screen.  
mote control or the arrow buttons  
on the device.  
Confirm your entries with the EN-  
TER button > on the remote  
control.  
Perform your settings using the  
Normal/PS: The DVD player is  
connected to a 4:3 monitor. The  
wide image is displayed using the  
full height of the screen. The left  
and right edge of the wide image  
is automatically cut off.  
buttons  
6 of the remote  
control or the arrow buttons on the  
device.  
97  
DVD OPERATION  
WIDE: The DVD player is con-  
nected to a 16:9 monitor. The  
wide image is displayed on the  
screen at full size.  
Audio Setup  
The Audio Setup allows you to control  
the SPDIF output of the device, set the  
PCM channel and set the sampling rate  
of the LPCM output. In addition, you  
can control the Dynamic Range Con-  
trol (DRC) and the HDCD filter.  
Displaying the camera perspective  
You can specify that a camera symbol  
is shown if more than one camera per-  
spective is available on the DVD. For  
this purpose, select the setting “ON”.  
SPDIF setting  
For the SPDIF output of the device, you  
can select whether an SPDIF-RAW  
signal, an SPDIF-PCM signal a manu-  
ally controlled signal should be output  
or that the SPDIF output should be  
switched off.  
The setting of the camera perspective  
is performed under the “Angle Mark”  
menu item.  
Displaying captions  
Captions are special subtitles that can-  
not be switched on/off using the subtitle  
functionofaDVD.Youcanusethismenu  
to switch these subtitles on or off. Se-  
lect the setting “Off” to switch it off.  
Select the desired setting under  
“SPDIF Output”.  
Notes:  
The SPDIF output is not muted for  
traffic announcements, incoming  
telephone calls and navigation  
voice output.  
DVD/DVD audio priority  
DVD audio generally contains audio  
data in two versions:  
The audio data of the DVD drive  
are output via the SPDIF output.  
One high-resolution uncompressed  
variant and one compressed variant  
(e.g. in DTS or Dolby Digital).  
PCM channel  
The SPDIF output can be used to out-  
put the PCM data in the “L/R”, “LS/RS”  
or “C/LFE” mode.  
The respective setting can be per-  
formed under “PCM Channel” in the  
“SPDIF Output”.  
Here you can define whether you want  
to listen to high-resolution audio data  
or to compressed audio data.  
Select the “DVDAudio” setting for high-  
er quality or “DVD Video” for the com-  
pressed version.  
The setting of the priority is performed  
under the “Priority” menu item.  
98  
DVD OPERATION  
Setting the LPCM  
Brightness  
This device can be used to output a You can adjust the brightness in incre-  
linear PCM signal (LPCM) with a sam- ments from -20 to +20.  
pling rate of 48 K, 96 K or 192 K.  
The setting for brightness is located in  
The LPCM setting is located under “Quality” under “Brightness”.  
“LPCM OUT” in the “SPDIF Setup”.  
Contrast  
Dolby Digital Setup - Dynamic  
Range Control  
You can adjust the contrast in incre-  
ments from -16 to +16.  
Dynamic Range Control means that  
the difference between “loud” and “soft”  
sounds is adjusted. The volume of soft  
sounds is increased and that of loud  
sounds is lowered. You can use the  
DRC of the device to set the dynamics  
of a Dolby programme in increments  
from “OFF” to “Full”. Select the “FULL”  
setting for full dynamic adjustment.  
The setting for contrast is located in  
“Quality” under “Contrast”.  
Gamma correction  
You can adjust the gamma correction  
for playback on TFT displays. You can  
select among the settings “High”, “Me-  
dium”, “Low”, and “None”.  
The setting for gamma correction is  
located in “Quality” under “Gamma”.  
The setting of DRC is located under  
“Dynamic” in the “Dolby Digital Setup”.  
Colour  
Setting the HDCD filter  
You can adjust the colour in increments  
from -9 to +9.  
If you play HDCD-DVDs or CDs (High  
Definition Compatible Digital), you can  
select a filter.  
The setting for colour is located in  
“Quality” under “Hue”.  
Select the desired filter under “HDCD”.  
Colour saturation (for NTSC only)  
Video Setup - image settings  
You can adjust the colour saturation in  
In the Video Setup, you can perform increments from -9 to +9.  
different settings for an optimal image  
The setting for colour saturation is lo-  
cated in “Quality” under “Saturation”.  
playback on the connected display.  
Adjusting picture sharpness  
Luminance (for NTSC only)  
To adjust the picture sharpness, you  
can select among the settings “High”,  
“Medium” and “Low”.  
You can select the settings “0T” and  
“1T” for luminance.  
The setting for luminance is located in  
“Quality” under “Luma Delay”.  
The setting for picture sharpness is lo-  
cated in “Quality” under “Sharpness”.  
99  
DVD OPERATION  
Note:  
The television standard can also  
Preferences - preferred  
settings  
be switched using the remote con-  
trol. Press the TV-Mode button E  
repeatedly until the desired televi-  
sion standard is displayed.  
Under “Preferences”, you can set the  
television standard of the external dis-  
play, switch PBC on and off, set the  
preferred playback language, select  
the preferred language for subtitles, set  
the parental control, set the region, and  
reset the device.  
Switching playback control on/off  
If the Playback Control (PBC) function  
is switched off, the titles and chapters  
of a VCD/SVCD are played in ascend-  
ing order. With PBC on, the VCD/  
SVCD is played with the predefined  
menus and in logical order.  
To call up the preferred settings,  
press the button O on the  
remote control twice.  
Press the SETUP button < on  
The setting for PBC is located under  
“PBC”.  
the remote control.  
Select "Preferences Page" using  
the buttons  
control or the arrow buttons on the  
device.  
6 of the remote  
Selecting the playback language  
You can preselect the preferred play-  
back language of the DVD. If the se-  
lected language is available on the  
DVD, the playback starts with the pre-  
set language.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
The setting of the playback language  
is performed under the “Audio” menu  
item.  
Setting the colour television  
standard of the TV device  
For a perfect image quality, set the col-  
our television standard on the device Selecting the language of subtitles  
which is used by the attached monitor.  
You can preselect the preferred lan-  
“PAL” is the standard used in Europe,  
“NTSC” is the standard for the Ameri-  
can/Asiatic region.  
guage for subtitles. If the selected lan-  
guage for subtitles is available on the  
DVD, the subtitles are displayed in the  
preset language.  
If you select the “MULTI” setting, the  
standard of the DVD is used for the  
output.  
The setting of the subtitles is performed  
under the “Subtitle” menu item.  
The setting of the television standard  
is performed under the “TV TYPE”  
menu item in the menu “Preferences  
Page”.  
100  
DVD OPERATION  
4 PG 13: Accompanying adult is sug-  
gested, not suitable for children under  
the age of 13.  
Selecting the language for the DVD  
menu  
You can preselect the preferred lan-  
guage for the menus of the DVD. If the  
selected language for menus is avail-  
able on the DVD, the menus of the  
DVD are displayed in the preset lan-  
guage.  
5 PG-R: Only for adolescents accom-  
panied by an adult. Prohibited for chil-  
dren, contents includes violence, ob-  
scene language, etc.  
6 R: Prohibited for adolescents, con-  
tents includes violence, obscene lan-  
guage, etc.  
The setting of the language for the DVD  
menu is performed in the “Disc Menu”  
menu item.  
7 NC 17: Contents not suitable for ad-  
olescents under the age of 17.  
Parental control  
8 ADULT: Contents for adults only: Vi-  
olence, sex, etc.  
You can secure the device against un-  
authorised use by assigning a pass-  
word. In addition, you can specify a  
rating level.  
Notes:  
Some blocked DVDs can be re-  
leased directly at the start with  
YES (ENTER) and the password.  
Others require you to change the  
rating level in the setup before the  
playback of the DVD. This action is  
dependent upon the DVD.  
Rating level means that some DVDs  
are equipped with a code that de-  
fines the age-appropriate release.  
If you set a rating level that is lower than  
the one found on the inserted DVD, it  
can be played only after entering the  
password.  
If you activated password protec-  
tion, the age-appropriate release  
can only be changed after enter-  
ing the password. For further de-  
tails, please read the section “Acti-  
vating/deactivating password pro-  
tection”.  
Note:  
Not all DVDs support the Rating  
Level function.  
In the menu you can define which mov-  
ies can be played. These ratings follow  
the recommendations of the Motion  
PictureAssociation ofAmerica (MPAA).  
The setting for the parental control can  
be performed in the “Parental” menu  
item.  
The following options can be selected:  
1 KID SAF: Approved for children  
2 G: Approved for children  
3 PG:Accompanying adult during play-  
back is suggested.  
101  
DVD OPERATION  
The password is changed in the “Pass-  
word” menu. To change the password,  
you must first enter the current pass-  
word with the numeric buttons S and  
then enter the new password twice.  
Resetting the device  
You can reset the device, thereby de-  
leting all, personal setting (including the  
self-defined password) and re-estab-  
lish the basic factory settings.  
After you have entered the correct  
password and entered the new pass-  
word twice, the entry marking automat-  
ically switches to “OK”.  
Resetting the device is performed in  
the “Default” menu item.  
Setting password protection -  
Assigning a password  
Note:  
You can activate the password protec-  
tion for the device. With activated pass-  
word protection, you can change the  
age-appropriate release/parental con-  
trol only after entering the password.  
If you forgot your password, you  
can use the master code 136900  
and assign a new password.  
Exiting the setup menu  
To exit the setup menu,  
Activating/deactivating password  
protection  
press the SETUP button < on  
the remote control.  
The password protection can be acti-  
vated (ON) or deactivated (OFF) in the Or  
“Password Mode” menu. To change the  
Select “Exit Setup Menu” using  
the buttons 6 of the remote  
setting, you must enter the current  
password using the numeric buttons  
S.  
control or the arrow buttons on the  
device.  
If you have not yet entered a password,  
use the preset password 000000.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
After you have entered the correct  
password, the entry marking automat-  
ically switches to “OK”.  
Changing the password  
You can change the preset password  
and define your own. The password  
must have six digits. To change the  
password, you must first enter the old  
password. If you have not yet assigned  
a password, use the preset password  
000000.  
102  
CD MODE  
Switching to CD mode  
CD mode  
If there is no CD inserted in the drive,  
You can use this device to play stand-  
ard audio CDs, CD-Rs and CD-RWs  
with a diameter of 12 cm. To avoid prob-  
lems when playing CDs, you should not  
burn CDs at speeds greater than 16x.  
switch on the device by pressing  
button 1.  
Press the button 2.  
The control panel opens.  
To ensure proper functioning, use only  
CDs with the Compact-Disc logo.  
Copy-protected CDs can cause play-  
back problems. Blaupunkt cannot guar-  
Gently insert the CD with its print-  
ed side uppermost into the drive  
until you feel some resistance.  
antee the proper functioning of copy- The drive draws in the CD automati-  
protected CDs!  
cally.  
You must not hinder or assist the drive  
as it draws in the CD.  
Besides being able to play audio CDs  
on this device, you can also play CDs  
containing MP3 music files and DVDs. Gently close the control panel  
For further details, please read the  
chapters “MP3 mode” and “DVD  
mode”.  
whilst exerting a little pressure un-  
til you feel it click into place.  
The CD starts playing.  
Risk of severe damage to the  
DVD/CD drive!  
If a CD is already inserted in the  
drive,  
CD singles with a diameter of 8 cm  
and non-circular contoured CDs  
(shape CDs) must not be used.  
We accept no responsibility for any  
damage to the DVD/CD drive that  
may occur as a result of the use of  
unsuitable DVDs/CDs.  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “DISC” appears on the dis-  
play.  
Playback begins from the point at which  
it was last interrupted.  
Selecting tracks  
Press one of the arrow buttons 6  
to select the next or previous  
track, or press the or button  
P on the remote control.  
If you press the or button 6 or  
P once, the current track is played  
again.  
103  
CD MODE  
After entering the time, the playback is  
continued at the desired position.  
Direct track selection with the  
remote control  
In CD mode, you can directly select  
tracks with the remote control or se-  
lect a specific playing time on the CD  
or in the current track.  
Selecting the playing time in the  
current track  
Press the GOTO button B re-  
peatedly until the external display  
shows “TRACK GO TO”.  
Note:  
This function is operable only if an  
external display is connected.  
Enter the desired playing time in  
the minute-second format where  
you want the playback in the track  
to start using the numeric buttons  
S.  
Track selection  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
After entering the time, the playback is  
continued at the desired position.  
After entering the number, the desired  
track begins to play.  
Fast track selection  
To quickly select tracks backwards or  
forwards,  
Or  
Press the GOTO button B re-  
peatedly until the external display  
shows “SELECT TRACK”.  
press and hold down one of the  
/
buttons 6 until fast-reverse/  
fast-forward track selection begins.  
Enter the number of the desired  
track using the numeric buttons 0  
to 9 S, e.g. 0 2 for the second or  
1 2 for the twelfth track.  
Fast searching (audible)  
To fast search backwards or forwards,  
press and hold down one of the  
buttons 6 until fast searching  
backwards/forwards begins.  
After entering the number, the desired  
track begins to play.  
Fast searching with the remote  
control  
Selecting the playing time on the  
CD  
You can perform a fast searching with  
different speeds (2x, 4x, 8x, 16x, and  
32x) with the remote control.  
Press the GOTO button B re-  
peatedly until the external display  
shows “DISC GO TO”.  
Note:  
Enter the desired playing time in  
the minute-second format where  
you want the playback to start us-  
ing the numeric buttons S.  
The search speed is shown on an  
external display (optional equip-  
ment).  
104  
CD MODE  
For fast searching forwards  
Cancelling SCAN and continuing  
listening to a track  
press the  
button @ on the  
remote control repeatedly until  
the desired speed is shown.  
To end the scanning process,  
press MENU•OK button 7.  
For fast searching backwards  
The currently scanned track will then  
continue to be played normally.  
press the  
button @ on the  
remote control repeatedly until  
the desired speed is shown.  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
press the RPT 4 button 9.  
To end the searching,  
press the button A on the  
remote control.  
“REPEAT TRACK” appears briefly on  
the display, and the RPT symbol is  
shown. The track is repeated continu-  
ously until you deactivate RPT.  
Random track play (MIX)  
Press the 1 MIX button 9.  
“MIX CD ON” appears briefly on the  
display and the MIX symbol is dis-  
played. The next randomly selected  
track will then be played.  
Cancelling REPEAT  
If you want to cancel the repeat func-  
tion,  
press the RPT 4 button 9 again.  
Cancelling MIX  
“REPEAT ALL” appears briefly on the  
display, and the RPT symbol disap-  
pears. Normal playback is then re-  
sumed.  
Press the 1 MIX button 9 again.  
“MIX CD OFF” appears briefly on the  
display and the MIX symbol disap-  
pears.  
REPEAT with the remote control  
Scanning tracks (SCAN)  
In CD mode, you can select the RE-  
You can scan (briefly play) all the tracks PEAT mode with the remote control.  
on the CD.  
To repeat a track,  
Press and hold down the  
press the PLAY MODE button J  
MENU•OK button 7 for longer  
than two seconds.  
repeatedly until “TRACK” is shown  
on the external display next to the  
The next track will then be scanned.  
repeat symbol.  
To cancel REPEAT,  
Note:  
You can set the scanning time. For press the PLAY MODE button J  
further information, please read  
the section entitled “Setting the  
scanning time” in the “Radio  
mode” chapter.  
repeatedly until “ALL” is shown on  
the external display next to the re-  
peat symbol.  
105  
CD MODE  
Repeated playback of a defined Changing the display  
section of a title  
You can select different displays for CD  
mode:  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
“NORMAL MODE”:  
First line: Track number  
Second line: Playing time  
Note:  
This function is operable only if an  
external display is connected.  
“INFO MODE”:  
First line: Track number and play-  
ing time.  
To define the starting point of the sec-  
tion,  
Second line: CD text (if available)  
“CLOCK MODE”:  
First line: Track number and play-  
ing time.  
Second line: CD text (if available)  
and time  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to start.  
To define the ending point of the sec-  
tion,  
“MINIMAL MODE”:  
The title number is displayed on  
the top line.  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the  
repeat function to end.  
Note:  
CD text can only be displayed if  
the appropriate information is con-  
tained on the CD.  
The section of the title is repeated until  
you press the A-B button L again.  
To switch between the display options,  
Interrupting playback (PAUSE)  
Press the button 6 9.  
press the DIS•ESC button 5  
once or several times until the de-  
sired display is shown.  
“PAUSE” appears on the display.  
Cancelling pause  
Display on an external display  
During the pause, press the but-  
In CD mode, the following information  
is always shown on an external display,  
independent of the selected display of  
the device display:  
ton 6 9.  
Playback is continued.  
You can also interrupt and continue  
playback using the button A on the  
remote control.  
the number of the current track,  
the number of tracks on the CD,  
the track information from the CD  
text (if available)  
and  
106  
CD MODE  
the playing time of the track  
(Single Elapsed)  
Scrolling CD text again  
You can re-scroll the displayed CD text  
at any time in Info Mode.  
or  
the remaining playing time of the  
track (Single Remain)  
Briefly press the 5 SCL button 9.  
Programming your favourite  
track with the remote control  
or  
the elapsed playing time of the CD  
(Total Elapsed)  
In CD mode, you can use the remote  
control to program a playlist of up to  
20 of your favourite tracks of the cur-  
rent CD. The playlist is deleted when  
you remove the CD or when you stop  
the playlist and exit the programming  
mode.  
or  
the remaining playing time of the  
CD (Total Remain)  
To select one of the different time dis-  
play options,  
Note:  
press the DISPLAY button C on  
the remote control repeatedly until  
the desired information is shown  
on the external display.  
This function is operable only if an  
external display is connected.  
Defining and starting a playlist  
Displaying CD text  
Press the PROGRAM button K  
on the remote control.  
Some CDs include CD text. The CD  
text might contain the names of the  
artist, album and tracks.  
The programming mode is displayed.  
The number of available tracks on the  
CD is displayed and the selection mark  
(green) is positioned at memory loca-  
tion 1.  
If the CD text is available on the CD, it  
is shown on the second line of the dis-  
play in Info Mode and Clock Mode. The  
CD text is shown as scrolling text on  
the display with every track change.  
After the CD text is displayed once, the  
first 13 characters of the CD text of the  
current track are displayed.  
Enter the first track of your playlist  
with the numeric buttons 0 to 9 S.  
The selection mark moves to the next  
memory location.  
Enter the next track of your playlist  
with the numeric buttons 0 to 9 S.  
Note:  
The CD text is displayed as scroll-  
ing text if it contains more than  
13 characters in Info mode or  
more than 8 characters in Clock  
mode.  
If your playlist should have fewer than  
20 tracks,  
move the selection mark with the  
arrow buttons 6 to “START” and  
press the ENTER button >.  
107  
CD MODE  
Note:  
Ejecting a CD  
Press the  
The control panel opens out towards  
you.  
After you have programmed a  
playlist and exited the menu with  
“EXIT”, the playlist is not saved.  
button 2.  
Stopping the playlist  
Press the eject button next to the  
CD compartment.  
To end a running playlist,  
The CD is ejected.  
Press the PROGRAM button K  
on the remote control.  
Remove the CD and close the con-  
trol panel.  
The programming mode is displayed.  
The selection mark is positioned on  
“STOP”. To end the playback of the  
playlist,  
Notes:  
If a CD is ejected, the drive will  
automatically draw it back in again  
after approx. 10 seconds.  
press the ENTER button >.  
CDs can also be ejected if  
another audio source is active.  
Notes:  
If you selected “STOP” and con-  
firmed it with the ENTER button  
>, the playlist is deleted.  
If you want to exit the display of  
the playlist without deleting the  
playlist, mark “EXIT” and confirm it  
with the ENTER button >.  
Traffic announcements in CD  
mode  
If you wish to receive traffic announce-  
ments in CD mode,  
press the TRAF button 8.  
The priority for traffic announcements  
is activated if the display shows the traf-  
fic jam symbol. For further details,  
please read the chapter entitled “Traf-  
fic information”.  
108  
MP3/WMA MODE  
Up to 599 MP3 files in one directory  
can be managed with this device. The  
maximum number of files per CD/DVD  
is 150,000, the maximum directory  
depth is five.  
MP3/WMA mode  
You can also use this car sound sys-  
tem to play DVDs, CD-Rs and CD-  
RWs that contain MP3 music files. You  
can also play WMA files. The opera-  
tion for playing MP3 and WMA files is  
identical.  
D
i
r
D01  
Notes:  
e
c
t
WMA files with Digital Rights Man-  
agement (DRM) from online music  
shops cannot be played with this  
device.  
D02  
D03  
o
r
i
e
s
D04  
T001  
WMA files can only be played  
back safely if they were created  
with Windows Media-Player ver-  
sion 8.  
T001  
T002  
T003  
T004  
T005  
T002  
T003  
T004  
T005  
T006  
T007  
T008  
T009  
T010  
T011  
T
r
a
c
k
s
Preparing an MP3/WMA CD  
T001  
F
i
The various combinations of DVD/CD  
burners, DVD/CD burning software and  
DVD/CD blanks may lead to problems  
arising with the device’s ability to play  
certain CDs. If problems occur with  
your own burned DVDs/CDs, you  
should try another brand of DVD/CD  
blanks or choose another colour of CD  
blanks. To avoid problems when play-  
ing CDs, you should not burn DVDs/  
CDs at speeds greater than 16x.  
T002  
T003  
T004  
T005  
T006  
l
e
s
You can name each directory using a  
PC. The device is capable of display-  
ing the directory name. Name the di-  
rectories and tracks/files using your CD  
burner software.The software’s instruc-  
tion manual will provide details on how  
to do this.  
The format of the DVD/CD must be ISO  
9660 Level 1/Level 2 or Joliet. Other  
formats cannot be played reliably.  
You can create a maximum of 254 di-  
rectories on a DVD/CD. You can use  
this device to access each of these di-  
rectories.  
109  
MP3/WMA MODE  
Note:  
Do not use “mixed” CDs contain-  
ing both non-MP3 data and MP3  
tracks (the device only reads MP3  
files during MP3 playback).  
When naming directories and  
tracks/files you should avoid using  
accents and special characters.  
You can use a maximum of 32  
characters (including the “.MP3”  
or “.WMA” file extension) for track  
names and directory names.  
Do not use mix-mode CDs con-  
taining both CD-audio tracks and  
MP3 tracks. If you try playing a  
mix-mode CD, the device will only  
play the CD-audio tracks.  
If you like your files to be in the correct  
order, you should use burner software  
that places files in alphanumerical or-  
der. If your software does not provide  
this feature you also have the option  
of sorting the files manually. For this  
purpose, you must enter a number in  
front of each file name, e.g. “001”,  
“002”, etc. The leading zeros must also  
be entered.  
Switching to MP3 mode  
MP3 mode is activated in the same  
way as normal CD mode. For further  
information, please read the section  
entitled “Switching to CD mode” in the  
“CD mode” chapter.  
If you connected an external display,  
the following information is displayed  
after the CD is read and the MP3/WMA  
playback has started:  
MP3 tracks can contain additional in-  
formation such as the artist, album and  
track names (ID3 tags). This device  
can display ID3 tags (version 1).  
Number of the track and number  
of tracks in the directory.  
When creating (coding) MP3 files from  
audio files, you should use bit rates  
from 80 to 320 kbit/s and sampling  
rates of 32, 44 and 48 kHz.  
Bit rate of the file.  
Elapsed playing time and total  
playing time of the track.  
Name of the directory.  
This device can only play MP3 files that  
have the “.MP3” file extension.  
In the left column, the list of tracks  
in the directory.  
Notes:  
In the right column, MP3 informa-  
tion from the ID tags (only if avail-  
able on the DVD/CD).  
To ensure uninterrupted playback,  
do not try changing the file exten-  
sion to “.MP3” of any files other  
than MP3 files and then attempt to  
play them! The device will ignore  
these invalid files during playback.  
110  
MP3/WMA MODE  
Setting the display (internal  
display)  
Selecting the directory on the  
device  
For convenient navigation in the data  
structure of the CD, you can display  
the current and the following directory  
on the two lines of the display. The di-  
rectories are displayed with the names  
that you created when burning the CD.  
Whilst the directories are being dis-  
played, you can use the arrow buttons  
to display and select all the available  
directories.  
Configuring the default display  
You can display various types of infor-  
mation on the current track:  
1. “NORMAL MODE”:  
First line: Type of file (MP3 or  
WMA), number of track and play-  
ing time.  
Second line: Track name  
2. “INFO MODE”:  
First line: Track name.  
Second line: MP3-ID-TAG (if avail-  
able and activated, see “Selecting  
MP3 info”)  
During the MP3 playback, press  
the or button 6.  
The browse mode is automatically  
started, the current track is displayed  
on the first line of the display and the  
next track is displayed on the second  
line.  
Note:  
The system can display MP3-ID  
tags (version 1) if they have been  
saved with the MP3 files (for fur-  
ther information, please read the  
instructions that came with your  
PC’s MP3 software or burner soft-  
ware).  
Press the or button 6  
repeatedly until the first line of  
the display shows a D.  
Press the button 6.  
The names of the current and the fol-  
lowing directory are shown on the dis-  
play.  
3. “MP3 BROWSE MODE”:  
First line: Name of current track  
Second line: Name of next track.  
If you want to select a directory,  
4. “CLOCK MODE”:  
press one of the  
/
buttons 6  
First line: Type of file (MP3 or  
WMA), number of track and play-  
ing time.  
repeatedly until the directory is  
shown in the top line of the display  
and then press the button 6.  
Second line: MP3 info and time.  
The selected directory is opened. The  
tracks contained in the directory are  
displayed in browse mode.  
To switch between the different display  
options,  
press the DIS•ESC button 5.  
111  
MP3/WMA MODE  
Press the or button 6 re-  
peatedly until the first line of the  
display shows the desired track.  
Selecting a directory/track with  
the remote control  
In MP3 mode, you can directly select  
directories and tracks using the remote  
Press the button 6.  
The playback starts, the browse mode control.  
is automatically ended after approx. 10  
seconds.  
Note:  
This function is operable only if an  
external display is connected.  
Selecting a track on the device  
Track selection in the same  
directory  
Selecting tracks/files using the  
arrow buttons (Normal, info and  
clock mode)  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
To move up or down to another track/  
file in the current directory,  
press the or button 6 once  
After entering the number, the desired  
track begins to play.  
or several times.  
A single press of button 6 restarts  
the current track, if it previously played  
for more than 3 seconds.  
Or  
To move up or down to another track/  
file in the current directory,  
Selecting tracks in browse mode  
press the or button P once or  
Browse mode conveniently allows you  
to view the tracks contained in a direc-  
tory and then select a particular track.  
several times.  
Selecting a directory  
To select a directory with the remote  
control,  
During MP3 playback, repeatedly  
press the DIS•ESC button 5 until  
“MP3 BROWSE MODE” is dis-  
played.  
press the button 6 repeatedly  
until the selection mark is posi-  
tioned on the directory symbol.  
Press the or button 6 to  
display all the tracks contained in  
the directory one after another.  
Press the ENTER button >.  
The directory list is shown on the  
external display.  
If you want to select the track  
shown on the upper display line,  
press the button 6.  
Press the or button 6 to  
mark the desired directory.  
Press the ENTER button.  
The track list of the directory is dis-  
played.  
112  
MP3/WMA MODE  
Press the or button 6 to  
Fast searching with the remote  
control  
mark a track in the directory.  
Press the ENTER button.  
You can perform a fast searching with  
different speeds (2x, 4x, 8x, 16x, and  
32x) with the remote control.  
The desired track is started.  
Selecting a track from the track list  
Note:  
You can display a list of all tracks of a  
DVD/CD on the external display and  
select a track from the list.  
The search speed is shown on an  
external display.  
For fast searching forwards  
Press the PROGRAM button K.  
press the  
button @ on the  
The track list is displayed.  
remote control repeatedly until  
the desired speed is shown.  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
For fast searching backwards  
press the  
button @ on the  
remote control repeatedly until  
the desired speed is shown.  
After entering the number, the desired  
track begins to play.  
To end the searching,  
Or  
press the button A on the  
To move up or down to another track/  
file in the current directory,  
remote control.  
Random track play – MIX  
To play the tracks in the current direc-  
tory in random order,  
press the or button 6 once  
or several times to move the se-  
lection mark to the desired track.  
briefly press the 1 MIX button 9.  
Press the ENTER button.  
“MIX ON” and the MIX symbol appear  
on the display.  
The desired track is started.  
Fast search  
To fast search backwards or forwards,  
Cancelling MIX  
To cancel MIX,  
press and hold down the or  
button 6 until fast searching  
backwards/forwards begins.  
press the 1 MIX button 9 repeat-  
edly until “MIX OFF” is displayed.  
The MIX symbol disappears.  
The Repeat function is automatically  
activated, and the display shows the  
RPT symbol.  
113  
MP3/WMA MODE  
Cancelling REPEAT  
Scanning tracks – SCAN  
To stop the current track or current  
directory from being repeated,  
You can scan (briefly play) all the tracks  
on the CD.  
press the 4 RPT button 9 repeat-  
edly until “REPEAT OFF” is dis-  
played.  
Press and hold down the MENU•OK  
button 7 for longer than two  
seconds.  
RPT disappears from the display.  
The next track will then be scanned.  
“SCAN” briefly appears on the display.  
REPEAT with the remote control  
Notes:  
In CD mode, you can select the RE-  
PEAT mode with the remote control.  
You can set the scanning time.  
For further information, please  
read the section entitled “Setting  
the scanning time” in the “Radio  
mode” chapter.  
Note:  
This function is operable only if an  
external display is connected.  
To repeat a track,  
The Scan function cannot be acti-  
vated if it is started at the last title  
of a directory.  
press the PLAY MODE button J  
repeatedly until “REPEAT ONE” is  
shown on the lowest line of the  
external display.  
Cancelling SCAN and continuing  
listening to a track  
To repeatedly play all the tracks of a  
directory,  
Press and hold down the MENU•OK  
button 7 for longer than two  
seconds.  
press the PLAY MODE button J  
repeatedly until “REPEAT FOLD-  
ER” is shown on the lowest line of  
the external display.  
The currently scanned track will then  
continue to be played normally.  
To cancel REPEAT,  
Repeated playback of individual  
tracks or entire directories –  
REPEAT  
press the PLAY MODE button J  
repeatedly until “FOLDER” is  
shown on the lowest line of the  
external display.  
To play the current track repeatedly,  
briefly press the 4 RPT button 9.  
Repeated playback of a defined  
section of a title  
“REPEAT TRACK” and RPT appear  
briefly on the display.  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
To repeat the whole directory,  
press the 4 RPT button 9 again.  
“REPEAT DIR” appears briefly on the  
display.  
114  
MP3/WMA MODE  
Note:  
This function is operable only if an  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “VARIOUS MENU”  
appears on the display.  
external display is connected.  
To define the starting point of the sec-  
tion,  
Press the MENU•OK button 7.  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the  
repeat function to start.  
Press the or button 6  
repeatedly until “MP3 INFO”  
appears on the display.  
Use the  
buttons 6 to switch  
To define the ending point of the sec-  
tion,  
between the “ON” and “OFF”  
options.  
continue listening to the title and  
press the A-B button L on the  
remote control at the point where  
you want the repeat function to  
end.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
The section of the title is repeated until  
Displaying scrolling texts  
(scroll)  
The selected information title, track  
names or file name and directory name  
are shown once as scrolling text when  
the title changes.  
you press the A-B button L again.  
Interrupting playback (PAUSE)  
Press the button 6 9.  
“PAUSE” appears on the display.  
Cancelling pause  
To display the information again as  
scrolling text,  
During the pause, press the  
button 6 9.  
briefly press the 5 SCL button 9.  
Playback is continued.  
You can also interrupt and continue  
playback using the button A on the  
remote control.  
Note:  
The information is displayed as  
scrolling text if it contains more  
than 13 characters in Normal/Info  
mode, more than 11 characters in  
Browse mode or more than 8  
characters in Clock mode.  
Selecting MP3 info  
If you want to select the “MP3 INFO”  
display mode, you first have to activate  
this function in the menu. In order for  
the system to be able to display MP3  
information, the information must be  
stored on the CD in the form of ID tags  
together with the MP3 files.  
115  
CD CHANGER MODE  
CD-changer mode  
Fast searching (audible)  
To fast search backwards or forwards,  
Note:  
hold one of the  
buttons 6  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
pressed on the device or the or  
button 6 of the remote control  
until the fast searching backwards  
or forwards starts.  
Changing the display  
Switching to CD-changer mode  
You can choose from various display  
options in CD mode:  
Press SRC ; on the device or  
the SOURCE button ; on the re-  
mote control repeatedly until  
“NORMAL MODE”:  
“CDC” appears on the display.  
First line: Track number  
Second line: CD number/CD  
name and playing time  
The device starts playing the first CD  
that the CD changer detects.  
“CLOCK MODE”:  
Selecting CDs  
To move up or down to another CD,  
First line: Track number.  
Second line: CD number/CD  
name and clock time  
press the or button 6 on the  
device or the or button 6 of  
the remote control once or several  
times.  
“MINIMAL MODE”:  
First line: Track number.  
To switch between the display options,  
Note:  
press the DIS•ESC button 5.  
The device will ignore empty CD  
slots in the changer and slots con-  
taining invalid CDs.  
In the menu you can choose to display  
the CD name (if available) instead of  
the CD number. (For further informa-  
tion, please read the “Naming CDs”  
section):  
Selecting tracks  
To move up or down to another track  
on the current CD,  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
press the or button 6 on the  
device or the or button 6 of  
the remote control once or several  
times.  
Press the MENU•OK button 7.  
116  
CD CHANGER MODE  
Press the or button 6  
repeatedly until “CD NAME” or  
“DISC NUMBER” appears on  
the display.  
Random track play (MIX)  
To play the tracks on the current CD in  
random order,  
briefly press the 1 MIX button 9.  
Use the  
buttons 6 to switch  
“MIX CD” appears briefly and MIX  
lights up on the display.  
between the “CD NAME” and  
“DISC NUMBER” options.  
To play the tracks on all inserted CDs  
in random order,  
When you have finished making your  
changes,  
briefly press the 1 MIX button 9.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
“MIX ALL” appears briefly and MIX  
lights up on the display.  
Cancelling MIX  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
Press the 1 MIX button 9 repeat-  
edly until “MIX OFF” is displayed.  
briefly press the RPT 4 button 9.  
Scanning all tracks on all CDs  
(SCAN)  
To scan (briefly play) all the tracks on  
all the inserted CDs in ascending or-  
der,  
“REPEATTRACK” appears briefly and  
RPT lights up on the display.  
To repeat the current CD,  
press the RPT 4 button 9 again.  
press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
“REPEAT CD” appears briefly and RPT  
lights up on the display.  
Cancelling REPEAT  
“SCAN” and the selected display mode  
appear alternately on the display.  
To stop the current track or current CD  
from being repeated,  
Note:  
repeatedly press button RPT 4  
9 until “REPEAT OFF” appears  
in the display and RPT disappears.  
You can set the scanning time. For  
further information, please read  
the section entitled “Setting the  
scanning time” in the “Radio  
mode” chapter.  
117  
CD CHANGER MODE  
Use the  
/
buttons 6 to select  
Stopping SCAN  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
To stop scanning,  
press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
Use the or button 6 to move  
from one text input position to an-  
other.  
The currently scanned track will then  
continue to be played normally.  
When you have finished making your  
changes,  
Naming CDs  
The car sound system allows you to press the MENU•OK button 7  
assign names for up to 30 CDs so that  
you can recognise them more easily.  
The names can be a maximum of sev-  
en characters long.  
“CD NAME FULL” will appear on the  
display if you try assigning more than  
30 names.  
and then the DIS•ESC button 5  
to exit the menu.  
Deleting a CD name  
Listen to the CD whose name you  
want to delete.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until "VARIOUS MENU"  
appears on the display.  
Entering/editing CD names  
Listen to the CD that you want.  
Press the MENU•OK button 7.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
Press the or button 6  
repeatedly until “CD NAME EDIT”  
appears on the display.  
Press the MENU•OK button 7.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “CD NAME EDIT”  
appears on the display.  
The name of the current CD is dis-  
played.  
Press and hold down the  
MENU•OK button 7. After ap-  
prox. four seconds you will hear a  
beep and “DELETE NAME” ap-  
pears on the display.  
Press the MENU•OK button 7.  
You will now enter editing mode.  
If your CD does not have a name yet,  
“ABCDEFG” appears on the display.  
The currently active text input position  
flashes.  
Release the MENU•OK button 7.  
The CD name will be deleted.  
You can return to the menu by  
pressing the MENU•OK button  
7.  
118  
CD CHANGER MODE  
CLOCK TIME  
Deleting all CD names  
CLOCK time  
You can delete all the CD names stored  
in the car sound system.  
Displaying the time  
You can make the clock time appear  
continuously in the bottom part of the  
display while any audio source is acti-  
vated. For further information, please  
read the “Configuring the display” sec-  
tions in the relevant chapters.  
Listen to a CD.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “VARIOUS MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Setting the clock automatically  
Press the or button 6 re-  
peatedly until “CD NAME EDIT”  
appears on the display.  
You can configure the system to set  
the clock time automatically using the  
RDS signal.  
Press the MENU•OK button 7.  
Press the MENU•OK button 7.  
The name of the current CD is  
displayed.  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
Press and hold down the  
MENU•OK button 7. After ap-  
prox. four seconds you will hear a  
beep and “DELETE NAME” ap-  
pears on the display. Continue  
holding the button pressed down  
until you hear a second beep and  
“DELETE ALL” appears on the dis-  
play.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “CLOCK AUTO”  
or “CLOCK MANUAL” appears  
on the display.  
Select the “CLOCK AUTO” setting  
using the or button 6.  
Release the MENU•OK button 7.  
Press the MENU•OK button 7.  
The CD names will be deleted.  
The menu appears again.  
To exit the menu, press the  
MENU•OK button 7 and twice  
DIS•ESC 5.  
Setting the clock manually  
To set the clock time manually,  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
Press the MENU•OK button 7.  
119  
CLOCK TIME  
Press the or button 6  
repeatedly until “CLOCK SET”  
appears on the display.  
Displaying the time  
continuously when the device is  
off and the ignition is on  
To display the time when the device is  
off and the vehicle ignition is on,  
Press the MENU•OK button 7.  
The time appears on the display. The  
hours flash and can be adjusted.  
Press the MENU•OK button 7.  
Set the hours using the  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
/
buttons 6.  
Once the hours are set,  
press the button 6.  
The minutes flash.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “OFF CLOCK  
OFF” or “OFF CLOCK ON”  
appears on the display.  
Set the minutes using the  
/
buttons 6.  
Press the MENU•OK button 7  
Press the or button 6 to  
switch between the ON/OFF  
settings.  
and then the DIS•ESC button 5.  
Selecting 12/24-hour clock  
mode  
Press the MENU•OK button 7.  
When you have finished making your  
changes,  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “24 HOUR MODE”  
or “12 HOUR MODE” appears on  
the display.  
Press the or button 6 to  
switch between the modes.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
120  
SOUND  
Setting the left/right volume  
distribution (balance)  
To adjust the left/right volume distribu-  
tion (balance),  
Sound  
You can adjust the sound settings (bass  
and treble) separately for each source  
(radio, DVD/CD, CD changer, AUX).  
The volume distribution settings (bal-  
ance and fader) apply to all the audio  
sources.  
press the AUD•DEQ : button.  
Press the or button 6  
repeatedly until “BALANCE”  
appears on the display.  
Note:  
Instead of the AUD•DEQ button  
: on the device, you can also  
use the 3D button : on the  
remote control.  
Press the or button 6 to  
adjust the balance (right/left).  
Press the AUD•DEQ : button, to  
close the menu or press the or  
button 6 to make further  
Adjusting the bass  
Press the AUD•DEQ : button.  
changes to the settings.  
Press the or button 6 to  
Adjusting the front/rear volume  
distribution (fader)  
To adjust the front/rear volume distri-  
bution (fader),  
adjust the bass.  
Press the AUD•DEQ : button, to  
close the menu or press the or  
button 6 to make further  
changes to the settings.  
press the AUD•DEQ : button.  
Press the or button 6  
repeatedly until “FADER” appears  
on the display.  
Adjusting the treble  
Press the AUD•DEQ : button.  
Press the or button 6  
repeatedly until “TREBLE”  
appears on the display.  
Press the or button 6 to  
adjust the fader (front/rear).  
Press the AUD•DEQ : button, to  
close the menu or press the or  
button 6 to make further  
Press the or button 6 to  
adjust the treble.  
Press the AUD•DEQ : button, to  
close the menu or press the or  
button 6 to make further  
changes to the settings.  
changes to the settings.  
121  
X-BASS  
X-BASS  
EQUALIZER  
Equalizer  
The X-BASS feature can be used to The device features a digital equalizer  
boost the bass at low volume levels.  
DEQ.  
This means you have three 5-band  
equalizers, six sound presets and sev-  
en vehicle presets at your disposal.  
Adjusting the X-BASS boost  
The X-BASS boost (Level) can be set  
in steps ranging from 0 to 6 for one of  
the following frequencies: 32 Hz, 40 Hz,  
50 Hz, 63 Hz or 80 Hz.  
You can configure the EQ1 - EQ3  
equalizers manually. When doing so  
you can adjust (boost or reduce) one  
frequency of an equalizer band as well  
as the quality factor, i.e. the width of  
the filter.  
“LVL 0” means that no X-BASS boost  
will be applied, and “LVL6” means that  
X-BASS will be boosted by the maxi-  
mum amount.  
The following bands are available:  
Press the AUD•DEQ button : on  
the device or 3D : on the remote  
control.  
LOW 1  
LOW 2  
HIGH 1  
HIGH 2  
HIGH 3  
20 - 250 Hz  
20 - 250 Hz  
315 - 20,000 Hz  
315 - 20,000 Hz  
315 - 20,000 Hz  
“BASS” appears on the display.  
Press the or button 6 repeat-  
edly until “X-BASS” appears on the  
display.  
Switching the equalizer on/off  
To switch the equalizer on/off,  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
hold the AUD•DEQ button : or  
the 3D button : on the remote  
control pressed for more than two  
seconds.  
The X-Bass menu is displayed. The  
frequency flashes.  
Press the or button 6 to set  
the frequency that you want.  
The equalizer menu appears on the  
display.  
Press the button 6.  
The boost level (LVL) flashes.  
To activate the equalizer,  
Press the or button 6 to set  
select one of the sound presets or  
adjust the equalizer manually. For  
further details on this, please read  
the sections that follow in this  
chapter.  
the boost level that you want.  
Press the AUD•DEQ : button.  
122  
EQUALIZER  
To deactivate the equalizer,  
Selecting vehicle presets  
press the or button 6 repeat-  
edly until “EQ OFF” appears on the  
display.  
You can select optimised equalizer  
settings for the following vehicle types:  
COMPACT  
4DOOR  
CONVERT  
VAN  
ROADSTER  
MINI  
Press the MENU•OK button 7  
and then the DIS•ESC 5.  
Selecting sound presets  
You can select sound presets for the  
following music types.  
TRUCK  
POP  
The settings for these vehicle types  
have already been programmed.  
ROCK  
TECHNO  
JAZZ  
Hold the AUD•DEQ button : or  
the 3D button : on the remote  
control pressed for more than two  
seconds.  
CLASSIC  
SPEECH  
Press the or button 6 repeat-  
edly until “CAR PRESETS” appears  
on the display.  
The settings for these music styles  
have already been programmed.  
Hold the AUD•DEQ button : or  
the 3D button : on the remote  
control pressed for more than two  
seconds.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
Press the or button 6 re-  
peatedly until the vehicle type that  
you want is displayed.  
Press the or button 6 repeat-  
edly until “SOUND PRESETS”  
appears on the display.  
Press the MENU•OK button 7 and  
then the DIS•ESC 5.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
The settings are saved.  
Press the or button 6  
repeatedly until the sound preset  
that you want is displayed.  
Press the MENU•OK button 7  
and then the DIS•ESC 5.  
The settings are saved.  
123  
EQUALIZER  
Press the  
or button 6 repeat-  
Manually adjusting the  
equalizer  
edly until the equalizer band that you  
want to configure (“LOW1”, “LOW2”,  
“HIGH1”, “HIGH2” or “HIGH3”)  
appears on the display.  
Notes on adjusting the settings  
We recommend you use a CD that you  
are familiar with for making changes  
to the settings.  
Press the MENU•OK button 7.  
Press the or button 6 repeat-  
edly until the frequency that you  
want is displayed.  
Before adjusting the equalizer, set the  
sound and volume distribution settings  
to zero and deactivate X-BASS. For  
further information, please read the  
“Sound” chapter.  
Press the MENU•OK button 7.  
The top line displays the GAIN and the  
quality factor “Q”. The gain setting  
flashes. You can use the quality factor  
to adjust the width of the filter. The high-  
er you set the value for the quality fac-  
tor the more directly the filter will be  
applied to the selected frequency.  
Listen to the CD.  
What kind of impression does the  
sound make?  
Now read the “Sound impression”  
column in the table entitled “Help  
adjusting the equalizer”.  
To adjust the gain,  
Set the equalizer values as de-  
press the or button 6.  
To adjust the quality factor,  
press the button 6.  
The quality factor setting flashes.  
scribed in the “Measures” column.  
Making adjustments  
Hold the AUD•DEQ button : or  
the 3D button : on the remote  
control pressed for more than two  
seconds.  
Press the or button 6  
repeatedly until the setting that  
you want is displayed.  
Press the or button 6  
repeatedly until “MANUAL EQ”  
appears on the display.  
Note:  
Please note that you can boost or  
reduce one frequency in each  
equalizer band. Proceed in the  
way described above with all the  
equalizer bands that you want to  
adjust.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
Press the  
or button 6 re-  
peatedly until the equalizer that  
you want to configure (“USER  
EQ1”, “USER EQ2” or “USER  
EQ3”) appears on the display.  
Press the MENU•OK button 7  
and then repeatedly the DIS•ESC  
button 5 or the AUD•DEQ button  
; for longer than two seconds.  
Press the MENU•OK button 7.  
The settings are saved.  
124  
EQUALIZER  
Help adjusting the equalizer  
Measures  
Sound Impression/problem  
Increase bass with  
Bass sound is too weak  
Frequency: 32 to 160 Hz  
Gain: +4 to +6  
Reduce the lower mid level with  
Frequency: 400 Hz  
Gain: approx. -4  
Dirty bass  
Booming sound  
Unpleasant pressure  
Reduce the mid level with  
Frequency: 1,000 to 2,500 Hz  
Gain: -4 to -6  
Sound very much in the foreground,  
aggressive, no stereo effect.  
Boost the treble range with  
Frequency: 6,300 to 10,000 Hz  
Gain: +2 to +4  
Dull sound  
Little clarity  
No brilliance to the instruments  
125  
DISPLAY  
When you have finished making your  
changes,  
Adjusting the display  
settings  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu or the DIMMER  
button G on the remote control.  
Adjusting the display  
brightness  
If your car sound system is connected  
as described in the installation instruc-  
tions, the display brightness of the in-  
ternal display switches with the head-  
lights. You can adjust the display bright-  
ness separately for night and day in  
steps ranging from 1 - 16.  
Adjusting the viewing angle  
You can adjust the display’s viewing  
angle to suit the installation position of  
the device in your vehicle.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “DISPLAY MENU”  
appears on the display.  
Note:  
The brightness of a connected  
display can be set in the DVD  
setup. For further details, read the  
section “DVD setup” in the “DVD  
mode” chapter.  
Press the MENU•OK button 7 or  
the DIMMER button G on the  
remote control  
Press the or button 6  
repeatedly until “ANGLE” appears  
on the display with the current  
setting.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “DISPLAY MENU”  
appears on the display.  
Press the or button 6 to  
Press the MENU•OK button 7.  
adjust the viewing angle.  
OR  
When you have finished making your  
changes,  
Press the DIMMER button on the  
remote control.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
or the DIMMER button G on the  
remote control to exit the menu.  
Press the or button 6  
repeatedly until “DAY” or “NIGHT”  
appears on the display with the  
current setting.  
Press the or button 6 to  
switch between the brightness  
levels.  
126  
EXTERNAL AUDIO SOURCES  
When you have finished making your  
changes,  
External audio sources  
In addition to the CD changer, you can  
also connect another external audio  
source equipped with a line output. If  
no CD changer is connected to the  
device, you can connect two external  
audio sources. Audio sources can, for  
example, be portable CD players, Mi-  
niDisc players or MP3 players.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
If the AUX input is switched on,  
you can select it by pressing the  
SRC button ;.  
TheAUX input must be activated in the  
menu.  
An adapter cable is needed to connect  
an external audio source instead of a  
CD changer. You can obtain this cable  
(Blaupunkt no.: 7 607 897 093) from  
your authorised Blaupunkt dealer.  
Information about where to connect an  
audio source to theAUX2 input can be  
found in the installation instructions.  
Switching the AUX input on/off  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “AUX MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Repeatedly press the or  
button 6 until “AUX2” or “AUX1”  
appears on the display.  
If a CD changer is connected, „AUX1“  
is not available.  
Use the  
buttons 6 to switch  
between the “ON” and “OFF”  
options.  
127  
AMPLIFIER/SUB-OUT  
Amplifier/sub-out  
Switching the dual zone on/off  
If you connected the RC 13 H remote  
control (available as optional equip-  
ment) via an adapter, the rear loud-  
speakers are switched off. You can lis-  
ten to the audio playback from the  
DVD/CD mode via the headphone out-  
puts of the RC 13 H while the driver  
listens to a different source via the front  
loudspeakers.  
The car sound system provides con-  
nections that allow you to connect ex-  
ternal amplifiers. You can also connect  
an amplifier to the device's integrated  
low-pass filter to drive a subwoofer. The  
amplifiers must be connected as de-  
scribed in the installation instructions.  
Switching the internal amplifier  
on/off  
Press the MENU•OK button 7.  
If you are using external amplifiers, you  
can switch off the device’s internal  
amplifier (“INT AMP OFF” setting).  
Press the or button 6  
repeatedly until “VARIOUS  
MENU” appears on the display.  
Note:  
Press the MENU•OK 7, to  
Please check this setting if the  
loudspeakers do not emit any  
sound.  
display the menu.  
Press the or button 6  
repeatedly until “DUAL ZONE ON”  
or “DUAL ZONE OFF” appears on  
the display.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until "VARIOUS MENU"  
appears on the display.  
Use the  
buttons 6 to choose  
between “DUAL ZONE ON” and  
“DUAL ZONE OFF”.  
Press the MENU•OK 7, to  
display the menu.  
When you have finished making your  
changes,  
Press the or button 6  
repeatedly until “INT AMP ON” or  
“INT AMP OFF” appears on the  
display.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Use the  
buttons 6 to choose  
between “INT AMP ON” and “INT  
AMP OFF”.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
128  
TMC  
SPECIFICATIONS  
TMC for dynamic  
Specifications  
navigation systems  
TMC stands for “Traffic Message  
Channel”.  
Amplifier  
Output power: 4 x 26 watt sine  
according to  
Traffic reports are broadcast digitally  
via TMC, which means they can be  
used by compatible navigation systems  
during dynamic route planning. Your car  
sound system has a TMC output, which  
you can use for connecting Blaupunkt  
navigation systems.  
DIN 45 324 at 14.4 V  
4 x 50 watt max. power  
Tuner  
Wavebands in Europe:  
FM  
MW  
LW  
:
:
:
87.5 - 108 MHz  
531 - 1 602 kHz  
153 - 279 kHz  
You can find out from your Blaupunkt  
dealer which navigation systems can  
be used with your car sound system.  
FM frequency response:  
35 - 16,000 Hz  
DVD  
Supported formats:  
If a navigation system is connected and  
a TMC sender is being received, the  
display shows TMC.  
DVD±R,  
If dynamic navigation is active, the sys-  
tem will tune into a TMC station auto-  
matically.  
DVD±RW,  
SVCD, VCD,  
JPEG.  
Region code 2  
Dolby Digital Coaxial™ output  
Video output  
PAL/NTSC support  
CD  
Frequency response:  
20 - 20,000 Hz  
Pre-amp out  
4 channels: 2 V  
Input sensitivity  
AUX input:  
2 V / 6 k  
Tel./Navi input: 10 V / 1 kΩ  
Subject to changes!  
129  
Bitte den ausgefüllten Gerätepass sicher aufbewahren!  
Please keep the filled-in radio pass in a safe place!  
Prière de conserver soigneusement la carte d’autoradio  
remplie !  
Tenete per favore il libretto di apparecchio, debitamente  
riempito, in un posto sicuro!  
Bewaar de ingevulde apparaatpas op een veilige plaats!  
329  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
Austria  
Belgium  
Denmark  
Finland  
France  
(D)  
(A)  
(B)  
0180-5000225  
01-610 39 0  
02-525 5444  
05121-49 4002  
01-610 39 391  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 94 12 711  
01-46 66 706  
02-369 62464  
40 2085  
(DK) 44-898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 210 94 27 337  
(IRL) 01-46 66 700  
(I)  
02-369 62331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 0800 400 1010  
0800 400 1040  
66-817 157  
2185 00165  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
2185 00144  
902 52 77 70  
08-7501850  
91 410 4078  
08-7501810  
01-8471650  
02-6130 0514  
76 511 809  
022-8771260  
0212-346 00 40  
708-6817188  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0446  
Hungary  
Poland  
Turkey  
USA  
Brasil  
(H)  
76 511 803  
(PL) 0800-118922  
(TR) 0212-335 06 71  
(USA) 800-2662528  
(Mercosur)  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
(BR) 0800 7045446  
+55-19 3745 2773  
+604-6413 640  
Gerätepass  
Las Vegas DVD35  
....................................................  
Name:  
Typ:  
7 645 650 310  
....................................................  
Serien-Nr: BP ...............................................  
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim  
07/05 - CM/ASA  
(dt, gb, fr, it, nl)  
8622404323  
(DE) Hinweis zum PTY-EON-Empfang  
Wenn Ihr Blaupunkt-Gerät von einem gehörten Radioprogramm zu einem anderen  
Radioprogramm oder von einer gewählten Quelle (CD oder CD-Wechsler) zu  
einem Radioprogramm umschaltet, so überprüfen Sie bitte, ob Sie PTY  
(Programm-Typ) eingeschaltet haben.  
Möchten Sie diese PTY-EON-Umschaltung nicht haben, so schalten Sie diese im  
Menü mit „PTY off” aus. Drücken Sie zuvor eine der Tasten AUDIO, SRC oder  
BND.  
Bitte lesen Sie dazu auch in der Bedienungsanleitung unter „Radiobetrieb” den  
Absatz „Programm-Typ (PTY)”.  
(GB) Note regarding PTY-EON reception  
If your Blaupunkt system switches from your chosen radio programme to another  
radio programme or from your chosen audio source (CD or CD changer) to a radio  
programme, please check whether you have activated the PTY (programme type)  
function.  
If you do not want this PTY-EON switching to occur, you should deactivate it in the  
menu by selecting “PTY off”. Press one of the AUDIO, SRC or BND buttons  
beforehand.  
Please also read about this in the operating instructions in the section entitled  
“Programme type (PTY)” under “Radio mode”.  
(FR) Remarque concernant la réception PTY EON  
Quand votre appareil Blaupunkt commute d’une émission de radio que vous êtes  
en train d’écouter à un autre programme radio ou d’une source (CD ou changeur  
CD) que vous avez choisie, assurez-vous d’avoir activé PTY (type de programme).  
Si vous ne souhaitez pas cette commutation PTY EON, désactivez-la en  
sélectionnant « PTY off » dans le menu. Appuyez au préalable sur l’une des  
touches AUDIO, SRC ou BND.  
Pour plus d’informations, reportez-vous également au paragraphe « Type de  
programme (PTY) » du chapitre « Mode radio » du mode d’emploi.  
(IT) Nota sulla ricezione del PTY-EON  
Quando il vostro apparecchio Blaupunkt si sintonizza da un radioprogramma in  
ascolto ad un altro, oppure si disinserisce dalla fonte audio selezionata (CD o  
multilettore CD) e passa alla ricezione di un programma radio, controllate per  
favore se avete inserito la funzione PTY (tipo di programma).  
8 622 404 794  
Se volete evitare queste commutazioni PTY-EON, selezionate nel menu la funzione  
"PTY off". Prima di fare ciò premete uno dei tasti AUDIO, SRC o BND.  
Leggete per favore a tale proposito quanto riportato nelle istruzioni d’uso nella  
sezione "Esercizio Radio" al punto "Tipo di programma (PTY)".  
(NL) Aanwijzing bij de PTY-EON-ontvangst  
Wanneer uw Blaupunkt-apparaat van één beluisterde radiozender overschakelt op  
een andere, of van een gekozen geluidsbron (cd of cd-wisselaar) op een  
radiozender, kunt u controleren of u PTY (programmatype) hebt ingeschakeld.  
Wanneer u geen prijs stelt op deze PTY-EON-omschakeling, schakelt u deze in het  
menu uit met "PTY off". Druk van tevoren op een van de toetsen AUDIO, SRC of  
BND.  
Lees hiervoor ook in de gebruiksaanwijzing onder "Radioweergave" de alinea  
"Programmatype (PTY)".  
(SW) Information om mottagning med PTY-EON  
Byter din Blaupunkt bilstereo självmant från inställt radioprogram eller spelad cd/cd-  
växlare till annat radioprogram? Då är möjligen funktionen Programtyp (PTY-EON)  
tillkopplad.  
Om Du vill undvika detta, frånkopplar Du funktionen Programtyp (PTY-EON) i  
menyn. Tryck först på någon av knapparna AUDIO, SRC eller BND och välj sedan  
"PTY off".  
För mer information, se avsnittet "Programtyp (PTY)" i bruksanvisningens kapitel  
"Radio".  
(ES) Observaciones sobre la recepción PTY-EON  
Si su equipo Blaupunkt cambia de la emisora de radio que está escuchando a otra,  
o de la fuente de sonido seleccionada (CD o cambiadiscos) a una emisora de  
radio, verifique si tiene activada la función PTY (tipo de programa).  
Si no desea que el equipo cambie automáticamente a emisoras PTY-EON,  
desactive dicha función seleccionando la opción “PTY off” en el menú. Pulse  
previamente una de las teclas AUDIO, SRC o BND.  
Para más detalles, consulte el punto “Tipo de programa (PTY)” en el capítulo  
“Modo de radio” de las instrucciones de manejo.  
2
(PT) Informação sobre a recepção no modo PTY-EON  
Se o seu aparelho mudar de um programa para outro programa ou de uma fonte  
que está a ouvir actualmente (CD ou CDC) para um programa radiofónico,  
verifique se a função PTY (tipo de programa) está activada.  
Se não desejar usar a função PTY-EON, desactive-a no menu escolhendo a opção  
“PTY OFF”. Prima anteriormente uma das teclas AUDIO, SRC ou BND.  
Para tal, leia também o parágrafo “Tipo de programas (PTY)” no capítulo “Rádio”  
nas instruções de serviço.  
(DK) Oplysning om PTY-EON-modtagelse  
Hvis din Blaupunkt radio slår fra det aktuelle radioprogram over i et andet eller fra  
en valgt kilde (CD eller Multi CD) over i et radioprogram, bør du tjekke om du har  
tændt for PTY (programtype).  
Hvis PTY-EON-omskiftningen ikke ønskes, deaktiveres funktionen med "PTY off" i  
menuen. Forinden trykkes på en af tasterne AUDIO, SRC eller BND.  
Læs også afsnittet om "Programtype (PTY)" under "Radiodrift" i  
betjeningsvejledningen.  
(SF) PTY-EON-vastaanottoon liittyvä ohje  
Jos Blaupunkt-laite vaihtaa kuuntelemastasi radio-ohjelmasta toiseen radio-  
ohjelmaan tai valitsemastasi äänilähteestä (CD tai CD-vaihtaja) johonkin radio-  
ohjelmaan, tarkista onko PTY (ohjelmatyypin tunnistus) päällä.  
Jos et halua laitteen vaihtavan radio-ohjelmaa automaattisesti PTY-EON-toiminnon  
avulla, voit kytkeä sen pois toiminnasta valikossa ("PTY off"). Paina ensin jotain  
painikkeista AUDIO, SRC tai BND.  
Lue myös käyttöohjeen kohdasta "Radiokäyttö" kappale "Ohjelmatyyppi (PTY)".  
(PL) Wskazówki dotyczàce odbioru PTY-EON  
Gdy urzàdzenie prze∏àcza si´ z jednej stacji radiowej na innà lub z wybranego  
êród∏a audio (CD / zmieniacz CD) na odbiór programu radiowego, to nale˝y  
sprawdziç, czy w∏àczony program jest programem typu PTY.  
Je˝eli nie chcà Paƒstwo korzystaç z funkcji PTY EON, to prosz´ w odpowiednim  
menu wybraç opcj´ „PTY off”. Przed wybraniem tej opcji trzeba wcisnàç jeden z  
przycisków AUDIO, SRC lub BND.  
Dalsze informacje na ten temat znajdà Paƒstwo w instrukcji obs∏ugi w rozdziale  
„Tryb obs∏ugi radia”, w punkcie „Typ programu (PTY)”.  
3
(CZ)  
                  
U
                  
                    
po  
                    
                      
                      
                        
zo  
                         
                          
                          
                            
r
                            
                              
n
                              
                                
û
                                
                                  
n
                                  
                                    
í
                                    
                                      
k
                                      
                                         
p
                                         
                                           
fií  
                                           
                                            
                                            
                                             
j
                                             
                                              
mu  
                                              
                                                 
                                                 
                                                    
s
                                                    
                                                       
f
                                                       
                                                        
u
                                                        
                                                          
n
                                                          
                                                            
k
                                                            
                                                              
c
                                                              
                                                               
í
                                                                
                                                                 
P
                                                                  
                                                                    
T
                                                                    
                                                                      
Y-  
                                                                      
                                                                         
                                                                         
                                                                          
E
                                                                          
                                                                            
O
                                                                            
                                                                               
N
                                                                               
Pokud se vበpfiístroj pfiepne ze stanice, kterou právû posloucháte, na jinou  
rozhlasovou stanici, nebo ze zvoleného zdroje (CD nebo mûniã CD) na jiné  
rozhlasové vysílání, zkontrolujte, jestli není zapnutá funkce PTY (typ programu).  
Pokud si nepfiejete, aby do‰lo k pfiepínání pfiístroje funkcí PTY-EON, vypnûte ji  
v nabídce bodem „PTY off”. Stisknûte nejprve jedno z tlaãítek AUDIO, SRC nebo  
BND.  
Bliωí informace k tomuto bodu naleznete v návodu k obsluze v kapitole „ReÏim  
rádia” v odstavci „Typ programu (PTY)”.  
(HU) Utasítás a PTY-EON vételhez  
Ha az Ön Blaupunkt készüléke egy hallgatott rádiómæsorról egy másik  
rádiómæsorra vagy egy kiválasztott forrásról (CD vagy CD-váltó) egy rádiómæsorra  
kapcsol át, úgy kérjük ellenœrizze, hogy bekapcsolta-e a PTY-t (mæsortípus).  
Ha Önnek nem megfelelœ ez a PTY-EON átkapcsolás, kérjük, kapcsolja azt ki a  
menüben a „PTY off”-fal. Elœtte azonban nyomja le az AUDIO, SRC vagy BND  
gombok egyikét.  
Kérjük, ezzel kapcsolatban olvassa el a kezelési útmutató „Rádió üzemmód”  
fejezetében a „Mæsortípus (PTY)” c. bekezdést.  
(KR) Napomena uz PTY-EON-prijem  
Ako Va‰ Blaupunkt ure∂aj prebacuje sa jednog radio-programa na neki drugi ili sa  
jednog izabranog izvora (CD ili CD-izmjenjivaã) na neki radio-program, onda  
molimo da provjerite, da li ste ukljuãili PTY (tip programa).  
Ako ne Ïelite ovo PTY-EON-prebacivanje, onda ga iskljuãite u meniju sa „PTY  
off”. Prethodno pritisnite jednu od tipki AUDIO, SRC ili BND.  
Molimo Vas, o tome proãitajte i u uputama za upotrebu pod „Rad radija” poglavlje  
„Tip programa (PTY)”.  
(SE) Napomena uz PTY-EON-prijem  
Ako Va‰ Blaupunkt ure∂aj prebacuje sa jednog radio-programa na neki drugi ili sa  
jednog izabranog izvora (CD ili CD-izmenjivaã) na neki radio-program, onda  
molimo da proverite, da li ste ukljuãili PTY (tip programa).  
Ako ne Ïelite ovo PTY-EON-prebacivanje, onda ga iskljuãite u meniju sa “PTY  
off”. Prethodno pritisnite jedan od tastera AUDIO, SRC ili BND.  
Molimo Vas, o tome proãitajte i u uputstvu za upotrebu pod “Rad radija” pasus  
“Tip programa (PTY)”.  
4
(SK)  
                      
Pokyny  
                      
                         
                         
                           
                           
                             
                             
                              
                               
                                
                                 
                                   
pre  
                                   
                                     
                                     
                                       
                                       
                                          
príjem  
                                          
                                            
                                            
                                             
                                             
                                              
                                              
                                               
                                               
                                                 
                                                 
                                                     
PTY-EON  
                                                     
                                                       
                                                       
                                                          
                                                          
                                                            
                                                            
                                                             
                                                             
                                                                
                                                                
                                                                   
                                                                   
Ak Vበprístroj Blaupunkt prepína z poãúvaného rádioprogramu na in˘  
rádioprogram alebo z niektorého zvoleného zdroja (CD alebo meniãa CD) na in˘  
rádioprogram, tak prosím skontrolujte, ãi ste zapnuli PTY (Program Type).  
Ak nechcete toto prepínanie PTY-EON, vypnite ho v menu pomocou “PTY off”.  
Stlaãte pred t˘m niektoré z tlaãidiel AUDIO, SRC alebo BND.  
Preãítajte si prosím k tomu tieÏ v návode na obsluhu, pod “Rádiová prevádzka”  
odsek “Program Type (PTY)”.  
(SL) Navodilo za PTY-EON sprejem  
Ko se Va‰a Blaupunkt naprava preklopi iz slu‰nega radijskega programma na  
drugi radijski program, oziroma iz izbrane zveze (CD ali CD-menjalca) na radijski  
program, Vas prosimo, da preverite, ãe ste vklopili PTY (programni-tip).  
âe noãete preklop PTY-EON, potem priklopite le-tega v meniju na „PTY off”.  
Pritisnite pred tem na tipko AUDIO, SRC oziroma na BND.  
Prosimo, da si preberete v navodilih za uporabo pod “radijo delovanje” odstavek  
“program-tip (PTY)”.  
(TR) PTY-EON yay∂n∂ al∂nmas∂ ile ilgili bilgi  
Eπer Blaupunkt cihaz∂n∂z dinlediπiniz bir radyo program∂ndan baµka bir radyo  
program∂na veya seçmiµ olduπunuz bir kaynaktan (CD veya CD deπiµtirici) bir  
radyo program∂na geçerse, PTY (program tipi) fonksiyonunu açm∂µ olup  
olmad∂π∂n∂z∂ lütfen kontrol ediniz.  
Eπer bu PTY-EON geçiµini istemiyorsan∂z, bu fonksiyonu menü üzerinden "PTY off"  
ile kapat∂n∂z. Bu iµlemden önce AUDIO, SRC veya BND tuµlar∂ndan birine bas∂n∂z.  
Lütfen bu konu ile ilgili olarak, kullanma k∂lavuzunda "Radyo modu" bölümündeki  
"Program tipi (PTY)" k∂sm∂n∂ okuyunuz.  
(
)
-
(
)
,
,
(
).  
-
,
”.  
,
.
(
)”.  
5
(RU) Указание по приему PTY-EON  
При переключении тюнера аппарата Blaupunkt на другую радиостанцию или  
переключении с радиоприема на другой источник звука (проигрыватель CD  
или CD-чейнджер) проверьте, пожалуйста, включена ли функция PTY (тип  
программы). Eсли Вы хотите отключить автоматический выбор программ  
PTY-EON, то выключите эту функцию опцией меню "PTY off". Для этого  
нажмите одну из следующих клавиш – AUDIO, SRC или BND.  
Ознакомьтесь, пожалуйста, с соответствующими инструкциями о включении  
автоматического режима выбора программ (PTY) в разделе "Прием  
радиопередач" пользовательской документации к Вашему аппарату  
Blaupunkt.  
6

Alpine INA W910 User Manual
Boston Acoustics GTA 802 User Manual
Canon Camcorder ZR70 MC User Manual
Canon Camera Accessories 60D User Manual
Canon Speedlite 580EX II User Manual
Canon VIXIA HF200 User Manual
Cary Audio Design CAD 300 SE User Manual
Huey Chiao HCB29 User Manual
JVC Car Speaker KD R330 User Manual
JVC EVERIO GZ MG47E User Manual