Blaupunkt ALICANTE CD32 User Manual

Radio / CD  
Las Vegas CD32  
San Diego CD32  
Santa Fe CD32  
Operating and installation instructions  
3
4
5
1
2
6
11  
10  
9
8
7
3
CONTROLS  
1
button to release the control  
panel.  
2
3
4
5
Button to switch the unit on/off.  
Volume control.  
CD compartment.  
Arrow buttons.  
MENU button to open the basic  
settings menu.  
6
Short press: SOURCE button, to  
select the CD, radio and CD  
changer sources.  
Long press: CD eject.  
7
8
AUDIO button to adjust the  
bass, treble, balance and fader  
settings.  
Short press: EQ button to select  
the sound presets.  
Long press: X-BASS, X-Bass  
function.  
9
:
Keys 1 - 6.  
Short press: BAND button to  
select the FM memory bank  
and the AM waveband, source  
selection to radio mode.  
Long press: TS, starts the  
Travelstore function.  
;
button to display the time.  
4
CONTENTS  
CD changer mode.................. 13  
Switching to CD changer mode..... 13  
Selecting CDs............................... 13  
Selecting tracks ............................ 13  
Fast searching (audible) ................ 14  
Repeating individual tracks or  
whole CDs (REPEAT).................... 14  
Random track play (MIX) ............... 14  
Scanning all tracks on all CDs  
Notes and accessories ............ 6  
Road safety ..................................... 6  
Installation ....................................... 6  
Accessories .................................... 6  
Removable control panel ......... 7  
Theft protection ............................... 7  
Detaching the control panel ............. 7  
Attaching the control panel .............. 7  
Switching on/off ...................... 8  
(SCAN) ......................................... 14  
Pausing playback (PAUSE)............ 15  
Adjusting the volume ............... 9  
Setting the power-on volume ........... 9  
Instantaneously reducing  
the volume (mute) ............................ 9  
Mute while telephoning .................... 9  
Clock - Time ........................... 15  
Displaying the time ........................ 15  
Setting the clock ........................... 15  
Selecting 12/24-hour clock mode .. 15  
Displaying the time when the unit  
Radio mode............................ 10  
Switching to radio mode ................ 10  
Selecting the frequency band /  
memory bank................................. 10  
Tuning into a station....................... 10  
Setting the sensitivity of station  
seek tuning.................................... 10  
Storing station presets................... 10  
Storing stations automatically  
(Travelstore) .................................. 11  
Listening to station presets ............ 11  
is off and the ignition is on ............. 16  
Sound and volume  
distribution settings ............... 16  
Adjusting the bass ......................... 16  
Adjusting the treble ....................... 16  
Adjusting the balance settings ....... 17  
Adjusting the fader settings ........... 17  
Equalizer and X-BASS ........... 18  
X-BASS ........................................ 18  
Selecting preset sound effect ........ 18  
CD mode ................................ 11  
Switching to CD mode .................. 11  
Selecting tracks ............................ 12  
Fast track selection ....................... 12  
Fast searching (audible) ................ 12  
Random track play (MIX) ............... 12  
Scanning tracks (SCAN) ............... 12  
Repeating tracks (Repeat) ............. 12  
Pausing playback (PAUSE)............ 13  
Removing the CD from the unit...... 13  
Specifications ........................ 18  
Amplifier........................................ 18  
Tuner............................................. 18  
CD ................................................ 18  
Pre-Amp Out ................................. 18  
Installation instructions.......... 65  
5
NOTES AND ACCESSORIES  
Thank you for deciding to use a  
Blaupunkt product. We hope you enjoy  
using this new piece of equipment.  
Installation  
If you want to install your car radio by  
yourself, please read the installation and  
connection instructions that follow these  
operating instructions.  
Please read these operating instructions  
before using the equipment for the first  
time. The Blaupunkt editors are con-  
stantly working on making the operat-  
ing instructions clearer and easier to  
understand. However, if you still have  
any questions on how to operate the  
equipment, please contact your dealer  
or the telephone hotline for your coun-  
try. You will find the hotline telephone  
numbers printed at the back of this  
booklet.  
Accessories  
Only use accessories approved by  
Blaupunkt.  
Remote control  
The supplied RC 04 remote control al-  
lows you to operate the main functions  
of your car radio safely and conveniently  
(only with the Las Vegas CD32).  
The RC 04 remote control is optionally  
available for the Santa Fe CD32 unit.  
Road safety  
The San Diego CD32 unit cannot be  
remotely controlled.  
Road safety has absolute prior-  
ity. Only operate your radio unit if the  
road and traffic conditions allow you  
to do so. Familiarize yourself with the  
unit before setting off on your jour-  
ney.  
You should always be able to hear  
police, fire and ambulance sirens  
from far. For this reason, set the vol-  
ume of the program you are listen-  
ing to at a reasonable level.  
Amplifier  
All Blaupunkt and Velocity amplifiers can  
be used.  
CD changer  
The Blaupunkt CD changer CDC A 01  
(7607 700 022) can be connected to the  
Las Vegas CD32 unit. No CD changer  
can be connected to either the San Di-  
ego CD32 or the Santa Fe CD32 units.  
6
REMOVABLE CONTROL PANEL  
The control panel locking mechanism  
opens.  
Removable control panel  
Theft protection  
First, pull the control panel straight  
As a way of protecting your equipment  
against theft, the unit is equipped with  
a detachable control panel (release  
panel). Without this control panel, the  
car radio is worthless to a thief.  
off the unit and then out towards  
the left.  
The unit switches off after the  
control panel is removed.  
All current settings of the radio are  
Protect your equipment against theft by  
taking the control panel with you every  
time you leave your vehicle. Do not  
leave the control panel in your vehicle -  
not even in a hiding place.  
saved.  
CD already inserted in the unit  
remains there.  
Attaching the control panel  
The control panel has been designed  
to be easily to use.  
Slide the control panel from left to  
right into the unit’s guide.  
Note:  
Press the left-hand edge of the  
control panel into the unit until it  
clicks into place.  
Never drop the control panel.  
Never expose the control panel to  
direct sunlight or other heat  
sources.  
Avoid making direct skin contact  
with the control panel’s contacts. If  
necessary, clean the contacts with  
a lint-free cloth and some alcohol.  
Detaching the control panel  
Note:  
When attaching the control panel,  
make sure you do not press on the  
display.  
1
If the unit was still switched on when  
you removed the control panel, the unit  
will automatically switch back on with  
the last settings activated i.e. radio, CD  
or CD changer (CD changer only with  
the Las Vegas CD32) when the panel  
is reinserted.  
Press the  
button 1.  
7
SWITCHING ON/OFF  
Switching on/off  
There are various ways of switching the  
unit on/off:  
Switching on by inserting a CD  
If the unit is switched off and there is no  
CD inserted in the drive,  
gently insert the CD with the  
printed side uppermost into the  
drive until you feel some resis-  
tance.  
Switching on/off using the vehicle  
ignition  
If the unit is correctly connected to the  
vehicle’s ignition and it was not switched  
off using button 2, it will switch on/off  
simultaneously with the ignition.  
The CD is drawn into the drive automati-  
cally.  
You must not obstruct or assist the drive  
as it draws in the CD.  
Switching on/off using the  
removable control panel  
Once the CD has been drawn in, the  
unit switches on again.  
Remove the control panel.  
The unit switches off.  
Attach the control panel again.  
The unit switches on. The last settings  
i.e. radio, CD or CD changer (CD  
changer only with the Las Vegas CD32)  
will be reactivated.  
Switching on/off using button 2  
To switch the unit on, press button  
2.  
The unit can only be switched on when  
the ignition is turned on.  
To switch the unit off, press button  
2 for longer than two seconds.  
The unit switches off.  
8
ADJUSTING THE VOLUME  
Setting the mute level  
Adjusting the volume  
You can set the unit’s mute volume level.  
Press the MENU button 5.  
The system volume can be adjusted in  
steps from 0 (off) to 100 (maximum).  
To increase the system volume,  
turn the volume control 3 clock-  
wise.  
Keep pressing the or button  
5 until “MUTE LVL” appears in  
the display.  
To decrease the volume,  
turn the volume control 3 anti-  
clockwise.  
Set the mute level using the and  
buttons 5.  
When you have finished making your  
changes,  
Setting the power-on volume  
press the MENU button 5 twice.  
You can set the unit’s default power-on  
volume.  
Mute while telephoning  
Press the MENU button 5.  
If your unit is connected to a mobile tele-  
phone, the car radio’s volume will be  
muted as soon as you “pick up” the tele-  
phone. “TEL CALL” flashes in the dis-  
play.  
Keep pressing the or button  
5 until “ON VOL” appears in the  
display.  
Set the power-on volume using the  
This requires to the mobile telephone  
be connected to the car radio as de-  
scribed in the installation instructions.  
and buttons 5.  
To help you adjusting the volume more  
easily, the volume will be increased /  
decreased as you make your changes.  
The volume will be reduced to the con-  
figured mute volume level.  
When you have finished making your  
changes,  
press the MENU button 5 twice.  
Instantaneously reducing the  
volume (mute)  
You can instantaneously reduce the  
volume (mute) to a level preset by you.  
Briefly press button 2.  
“MUTE” appears in the display.  
9
RADIO MODE  
Radio mode  
Setting the sensitivity of station  
seek tuning  
You can choose whether to tune only  
to strong reception stations or to also  
tune to those with a weak reception.  
Switching to radio mode  
If you are in CD or CD changer mode  
(CD changer only with the Las Vegas  
CD32),  
Press the MENU button 5.  
keep pressing the SOURCE 6  
button until the radio mode  
Keep pressing the or button  
5 until “SENS HI” or “SENS LO”  
appears in the display  
appears in the display together with  
the memory bank and frequency.  
“SENS HI” means that the tuner is set  
high to sensitivity. “SENS LO” means it  
is set to the low sensitivity setting. If  
“SENS LO” is selected, “LOC” lights up  
in the display.  
Selecting the frequency band /  
memory bank  
This unit can receive programs broad-  
cast over the FM and AM frequency  
band. There are three preset memory  
bank for the FM range and one for the  
AM range. Six stations can be stored  
on each memory bank.  
Set the required sensitivity using  
the and buttons 5.  
When you have finished making your  
changes,  
press the MENU button 5.  
Selecting the FM memory bank  
To switch between the FM memory bank  
FM1, FM2 and FMT,  
Tuning into stations manually  
You can also tune into stations manu-  
ally.  
press the BAND/TS button :.  
Selecting the AM waveband  
Press the or button 5.  
To select the AM waveband,  
keep pressing the BAND/TS button Storing station presets  
: until AM appears in the display.  
Storing stations manually  
Tuning into a station  
There are various ways of tuning to a  
station.  
Select the required memory bank  
(FM1, FM2 or FMT) or the AM  
waveband.  
Automatic seek tuning  
Tune into the station.  
Press the or button 5.  
The unit tunes to the next receivable  
station.  
Press one of the station buttons  
1-6 9 for longer than one second  
to store the station in that preset  
memory.  
10  
RADIO MODE  
CD MODE  
Storing stations automatically  
(Travelstore)  
You can automatically store the six sta-  
tions with the strongest reception in the  
region. The stations are stored in the  
FMT or AM memory depending on the  
selected frequency band.  
CD mode  
You can use this unit to play standard  
CDs with a diameter of 5 inches.  
Risk of severe damage to the  
CD drive!  
CD singles with a diameter of  
3 inches and contoured CDs (shape  
CDs) are not suitable for playback in  
this unit.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
Note:  
Any stations that were previously  
stored on this memory bank are  
deleted in the process.  
Press and hold the BAND/TS  
button : until seek tuning begins.  
Switching to CD mode  
If there is no CD inserted in the  
The station storing procedure begins.  
Once the procedure finishes, all the  
stored stations are played briefly.  
drive.  
Gently insert the CD with the  
printed side uppermost into the CD  
compartment until you feel some  
resistance.  
Listening to station presets  
Select the memory bank on which  
the station was stored.  
Press the preset station button 1-6  
9 of the station you want to listen  
to.  
The CD is drawn into the drive automati-  
cally.  
Do not use force when inserting the CD.  
You must not obstruct or assist the drive  
as it draws in the CD.  
CD playback begins.  
If a CD is already inserted in the  
drive.  
Keep pressing the SOURCE 6  
button until the CD mode display  
appears.  
Playback begins from the point at which  
it was last interrupted.  
11  
CD MODE  
Setting the scantime  
Selecting tracks  
You can set the scanning time to be-  
tween 5 and 30 seconds in the menu.  
Press the MENU button 5.  
Press one of the  
/
or  
/
buttons 5 to select the next or  
previous track.  
If you press the  
the current track will be played again  
from the beginning.  
/
button 5 once, Keep pressing the or button  
5 until “SCANTIME” appears in  
the display.  
Fast track selection  
To quickly select tracks backwards or  
forwards,  
Set the required scantime using  
the and buttons 5.  
When you have finished making your  
changes,  
press the MENU button 5 twice.  
keep one of the  
/
buttons 5  
pressed until fast-reverse / fast-  
forward track selection begins.  
Note:  
The set scantime also applies to  
scanning in CD changer mode.  
Fast searching (audible)  
To fast search backwards or forwards,  
keep one of the  
buttons 5  
Stopping SCAN and continuing  
playback  
pressed until fast searching  
backwards / forwards begins.  
To stop scanning,  
Random track play (MIX)  
press button 2 (SCAN) 9 again.  
Press button 4 (MIX) 9.  
The current track will then continue to  
be played.  
“S--MIX” and the track number appears  
in the display. The next randomly se-  
lected track will then be played.  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
press button 3 (RPT) 9.  
“S--RPT” and the track number appears  
in the display. The track is repeated until  
you deactivate RPT.  
Canceling MIX  
Press button 4 (MIX) 9 again.  
The standard CD display appears.  
Scanning tracks (SCAN)  
You can play briefly all the tracks on the  
CD.  
Deactivating REPEAT  
If you want to deactivate the repeat func-  
tion,  
Press button 2 (SCAN) 9.  
press button 3 (RPT) 9 again.  
The standard CD display appears. Nor-  
mal playback is then resumed.  
12  
CD MODE  
CD CHANGER MODE  
Pausing playback (PAUSE)  
Press button 1 9.  
“S--PAUSE” appears in the display.  
Canceling pause  
CD changer mode  
You can connect a CD changer to the  
Las Vegas CD32 unit. You can obtain  
further information on available CD  
changers from your dealer.  
Press button 2 9 while in  
Note:  
pause mode.  
Information on handling CDs,  
inserting CDs and operating the  
CD changer can be found in the  
operating instructions supplied with  
your CD changer.  
Playback is resumed.  
Removing the CD from the unit  
To remove the CD from the unit,  
keep the SOURCE button 6  
pressed until the CD is ejected.  
Switching to CD changer mode  
Keep pressing the SOURCE 6  
button until the display shows, for  
instance, “CDC 1--1”.  
The first digit in this display represents  
the CD number (in this case 1), and the  
second digit represents the track num-  
ber (in this case 1).  
Playback begins with the first CD that  
the CD changer detects.  
Selecting CDs  
To move up or down to another CD,  
press the or button 5 once or  
several times.  
Selecting tracks  
To move up or down to another track  
on the current CD,  
press the or button 5 once or  
several times.  
13  
CD CHANGER MODE  
Fast searching (audible)  
Random track play (MIX)  
To fast search backwards or forwards, To play the tracks on the current CD in  
random order,  
keep one of the  
buttons 5  
pressed until fast searching  
briefly press button 4 (MIX) 9.  
backwards / forwards begins.  
“S--MIX” appears briefly in the display.  
To play the tracks on all inserted CDs in  
random order,  
keep the 4 (MIX) button 9  
pressed for longer than two  
seconds.  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
briefly press button 3 (RPT) 9.  
“S--RPT” appears briefly in the display.  
“D--MIX” appears briefly in the display.  
To repeat the current CD,  
keep the 3 (RPT) button 9  
pressed for longer than two  
seconds.  
Canceling MIX  
To stop the tracks from being played in  
random order,  
press button 4 (MIX) 9 until  
“S--MIX” or “D--MIX” disappears  
and the standard CD changer  
display reappears.  
“D--RPT” appears briefly in the display.  
Deactivating REPEAT  
To stop the current track or current CD  
from being repeated,  
press button 3 (RPT) 9 until  
“S--RPT” or “D--RPT” disappears  
and the standard CD changer  
display reappears.  
Scanning all tracks on all CDs  
(SCAN)  
Scanning tracks on the current CD  
To briefly play all the tracks on the cur-  
rent CD in ascending order,  
press button 2 (SCAN) 9.  
“S--SCN” appears in the display.  
Scanning the first track on all CDs  
You can briefly play the first track all CDs  
in the CD changer.  
keep the 2 (SCAN) button 9  
pressed for longer than two  
seconds.  
“D--SCAN” appears in the display.  
14  
CD CHANGER MODE  
CLOCK - TIME  
Stopping SCAN  
CLOCK - Time  
To stop scanning,  
briefly press the 2 (SCAN) button  
9 again.  
Displaying the time  
To display the time,  
briefly press the button ;.  
The currently scanned track will then  
continue to be played normally.  
Setting the clock  
Note:  
Press the MENU button 5.  
You can set the scanning time  
(scantime). For further details, read  
the section entitled “Setting the  
scantime” in the “CD mode”  
chapter.  
Keep pressing the or button  
5 until “CLOCKSET” appears in  
the display.  
Press the button 5.  
The time appears in the display. The  
minutes flash on and off and can be  
adjusted.  
Pausing playback (PAUSE)  
Press button 1 ( ) 9.  
“S--PAUSE” appears in the display.  
Canceling pause  
Adjust the minutes using the  
/
buttons 5.  
Press button 2 ( ) 9 while in  
Once the minutes are set,  
press the button 5.  
The hours flash on and off.  
pause mode.  
Playback is resumed.  
Adjust the hours using the  
/
buttons 5.  
When you have finished making your  
changes,  
press the MENU button 5 twice.  
Selecting 12/24-hour clock  
mode  
Press the MENU button 5.  
Keep pressing the or button  
5 until “24 H MODE” or “12 H  
MODE” appears in the display.  
Press the or button 5 to  
switch between the modes.  
15  
CLOCK - TIME  
SOUND AND VOLUME  
DISTRIBUTION SETTINGS  
When you have finished making your  
changes,  
press the MENU button 5.  
Sound and volume  
distribution settings  
Adjusting the bass  
To adjust the BASS,  
Displaying the time when the  
unit is off and the ignition is on  
To display the clock when the unit is off  
and the ignition is on,  
press the AUDIO button 7.  
“BAS” appears in the display.  
To increase the bass,  
turn the volume control 3 clock-  
wise.  
press the MENU button 5.  
Keep pressing the or button  
5 until “CLOCK OFF” or “CLOCK  
ON” appears in the display.  
To decrease the bass,  
turn the volume control 3 anti-  
clockwise.  
Press the or button 5 to  
switch between the displays.  
When you have finished making your  
changes,  
wait 8 seconds, the settings are  
saved and the audio source display  
appears.  
When you have finished making your  
changes,  
press the MENU button 5.  
Adjusting the treble  
To adjust the TREBLE,  
keep pressing the AUDIO 7  
button until “TRE” appears in the  
display.  
To increase the treble,  
turn the volume control 3 clock-  
wise.  
To decrease the treble,  
turn the volume control 3 anti-  
clockwise.  
When you have finished making your  
changes,  
wait 8 seconds, the settings are  
saved and the audio source display  
appears.  
16  
SOUND AND VOLUME  
DISTRIBUTION SETTINGS  
Adjusting the balance settings  
Adjusting the fader settings  
To adjust the left/right volume distribu- To adjust the front/back volume distri-  
tion (balance),  
bution (fader),  
keep pressing the AUDIO 7  
button until “BAL” appears in the  
display.  
keep pressing the AUDIO 7  
button until “FAD” appears in the  
display.  
To move the volume distribution toward To move the volume distribution toward  
the right,  
the back,  
turn the volume control 3 clock-  
turn the volume control 3 clock-  
wise.  
wise.  
To move the volume distribution toward To move the volume distribution toward  
the left,  
the front,  
turn the volume control 3 anti-  
turn the volume control 3 tanti-  
clockwise.  
clockwise.  
When you have finished making your When you have finished making your  
changes,  
changes,  
wait 8 seconds, the settings are  
saved and the audio source display  
appears.  
wait 8 seconds, the settings are  
saved and the audio source display  
appears.  
17  
SPECIFICATIONS  
EQUALIZER AND X-BASS  
Equalizer and X-BASS  
X-BASS  
Specifications  
Amplifier  
The X-BASS feature can be used to Output power:  
boost the bass at low volume levels.  
Las Vegas CD32: 4 x 22 watts sine  
in accordance  
with DIN 45 324  
at 14.4 V 4 x 50  
To activate X-BASS,  
keep the EQ/X-BASS button 8  
pressed until “XBASS ON” appears  
in the display.  
watts max. power  
San Diego CD32: 4 x 15 watts sine  
in accordance  
“X-BASS” appears in the display.  
To deactivate X-BASS,  
with DIN 45 324  
at 14.4 V 4 x 40  
watts max. power  
keep the EQ/X-BASS button 8  
pressed until “XBASS OFF”  
appears in the display.  
Santa Fe CD32:  
4 x 18 watts sine  
in accordance  
with DIN 45 324  
at 14.4 V 4 x 45  
watts max. power  
“X-BASS” disappears.  
Selecting preset sound effect  
You can select preset sound effect for  
the following styles of music:  
Tuner  
CLASSIC  
POP M  
Frequency ranges US:  
FM:  
AM:  
87.5 - 107.9 MHz  
530 - 1710 kHz  
ROCK M  
The settings for these music styles have  
already been programmed.  
FM mono sensitivity:  
15 dBf  
To select one of the sound presets,  
keep pressing the EQ/X-BASS  
button 8 until the required setting  
appears in the display.  
FM frequency response:  
35 - 16,000 Hz  
CD  
If you want to deactivate the sound pre-  
set,  
Frequency response:  
20 - 20,000 Hz  
keep pressing the EQ/X-BASS  
button 8 until “DSP OFF” appears  
in the display.  
Pre-Amp Out  
(not applicable to San Diego CD32)  
Output:  
1.5 Vrms ± 2.5 dB  
Subject to changes!  
18  
Service numbers / Numéros du service après-vente /  
Números de servicio / Número de serviço  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
01-576 9473  
01-4598830  
02-369 6464  
40 2085  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0800-550 6550  
(IRL) 01-4149400  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherland  
Norway  
Portugal  
Spain  
(NL)  
023-565 6348  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
(N)  
(P)  
(E)  
(S)  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ)  
02-6130 0441  
01-333 9575  
0800-118922  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
Poland  
(H)  
(PL)  
Turkey  
USA  
(TR)  
0212-3350677  
0212-3460040  
708-6817188  
(USA) 800-2662528  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
12/01  
CM/PSS 8 622 403 186  
Radio / CD  
Las Vegas CD32  
San Diego CD32  
Santa Fe CD32  
Installation instructions  
Notice de montage  
Instrucciones de instalación  
Instruções de montagem  
Installation instructions • Notice de montage •  
Instrucciones de instalación • Instruções de montagem  
GB  
F
Safety precautions  
Indications de sécurité  
Installation and connection  
regulations  
Consignes de montage et de  
branchement  
– In the event that this equipment is  
installed or repaired incorrectly, this  
could cause malfunctions in the  
vehicle electronics.  
– En cas d’erreur d’installation ou  
d’entretien, des perturbations  
peuvent survenir au niveau des  
systèmes électroniques du  
véhicule.  
To avoid causing damage to your  
radio, use the corresponding  
Blaupunkt adapter cable to connect  
the 8-pin +/- ISO plug in the  
vehicle.  
– Pour ne pas détériorer votre  
autoradio, branchez le connecteur  
ISO +/- 8 pôles du véhicule  
uniquement via un câble adapta-  
teur Blaupunkt correspondant.  
While installing and connecting  
this equipment, please observe the  
following safety notes:  
Pendant le montage et le branche-  
ment, observez les consignes de  
sécurité suivantes :  
– Disconnect the negative battery  
termina.  
– Débrancher le pôle (-) de la  
batterie.  
– Observe the car manufacturer’s  
safety instructions.  
– Observer ce faisant les indications  
de sécurité du constructeur  
automobile.  
– If you drill any holes, make sure  
that you do not damage any parts  
of the vehicle.  
– Veiller à ne pas endommager les  
pièces du véhicule en perçant des  
trous.  
– The diameter of the positive/  
negative cable must not be less  
than 1.5 mm2.  
– La section transversale du câble  
(+) et (-) ne doit pas être inférieure  
à 1,5 mm2.  
65  
P
E
Normas de seguridad  
Indicações de  
segurança  
Especificaciones sobre la  
instalación y conexión  
– En caso de realizarse una instala-  
ción o un mantenimiento inadecua-  
do, éstos pueden ocasionar fallos  
en las funciones de los sistemas  
eléctricos del vehículo.  
Directivas de montagem e de  
conexão  
– Podem ocorrer erros de funciona-  
mento em sistemas electrónicos de  
automóveis devido à uma instala-  
ção ou manutenção errada.  
– Para que su radio no sufra daños,  
debe conectar el enchufe del  
vehículo de 8 polos +/- ISO sólo al  
correspondiente cable adaptador  
Blaupunkt.  
– Para evitar a destruição do seu  
rádio, deverá apenas ligar a ficha  
ISO de 8 pólos do automóvel  
através de um respectivo cabo de  
adaptação Blaupunkt.  
Durante el montaje y la conexión  
observe las siguientes normas de  
seguridad.  
Observe por favor as seguintes  
indicações de segurança durante a  
montagem e a ligação  
– Desemborne el polo negativo de la  
batería.  
– Separar por pressão o pólo  
negativo da bateria.  
– Al hacerlo, observe las normas de  
seguridad del fabricante del  
vehículo.  
– Observar as indicações de  
segurança do fabricante do  
automóvel.  
– Al taladrar orificios asegúrese de  
que el vehículo no sufra ningún  
daño.  
– Ao furar orifícios, deverá observar  
que não sejam danificadas partes  
do automóvel.  
– El diámetro del cable positivo y  
negativo no debe ser menor a  
1,5 mm2.  
– O diâmetro do cabo positivo e  
negativo não deve ser inferior a  
1,5 mm2.  
66  
1.  
Supplied Mounting Hardware  
Materiel de montage fourni  
Ferretería de montaje  
suministrada  
Elementos de fixação  
fornecidos  
A
12V  
B
2.  
182  
165  
53  
C
1-20  
A
D
E
4x M5x6  
x
x
x
x
RC 04  
Bend as many taps as possible.  
Plier si possible toutes les attaches.  
Lo ideal es poder doblar todas las bridas  
de sujeción.  
only  
Las Vegas CD32  
Devem ser dobradas o máximo possível  
de braçadeiras.  
67  
3.  
4.  
RR = right / rear  
7 607 621 . . .*  
RF = right / front  
LF = left / front  
LR = left / rear  
+
-
4 Ohm  
LR  
+
LF  
RF  
4 Ohm  
4 Ohm  
4 Ohm  
RR  
-
+
-
+
-
*
Car-specific adapter cable which  
is available at your dealer.  
5.  
8 601 910 002  
Câble adaptateur spécifique au  
véhicule, disponible dans le  
commerce.  
1
2
Adaptador específico del  
vehículo, el cual se puede adquirir  
en el comercio especializado.  
B
1
2
Cabo de adaptação específico do  
automóvel que pode ser adquirido  
no comércio especializado.  
6.  
12V  
68  
7.  
C-1 C-2 C-3  
1
4
7
10  
13 16 19  
A
B
3
6
9
12  
15 18  
C
B
A
2
5
8
11  
14 17 20  
1
2
3
4
5
6
7
8
Telefon Mute  
nc  
Permanent +12V  
Aut. antenna  
nc  
1
2
3
4
5
6
7
8
Speaker out RR+  
Speaker out RR-  
Speaker out RF+  
Speaker out RF-  
Speaker out LF+  
Speaker out LF-  
Speaker out LR+  
Speaker out LR-  
1
3
4
5
6
7
2
8
1
3
4
5
6
7
8
Kl.15/Ignition  
Ground  
2
C
C1  
C2  
C3  
1
Line Out LR 5V/10K  
Line Out RR 5V/10K  
Line Out Masse / Ground  
7
8
9
10  
11  
12  
nc  
nc  
nc  
nc  
nc  
nc  
13  
14  
15  
16  
17  
18  
19  
20  
Changer Bus  
nc  
2
3
4
5
6
+12V  
12V  
Changer GND  
AF - GND  
Line In - L 1,2V/10K  
Line In - R 1,2V/10K  
nc  
nc  
nc  
Amplifier  
Equalizer  
CDC A01  
only  
Las Vegas CD32  
only  
Las Vegas CD32,  
Santa Fe CD32  
69  
8.  
Line-Out Kabel  
Relais  
+
-
4 Ohm  
LR  
+
LF  
RF  
4 Ohm  
4 Ohm  
4 Ohm  
RR  
-
+
-
+
-
Kl. 15 +12 V  
7
5
3
1
8
6
4
2
12V  
Telephone Mute (low)  
This information is subject to change without notice!  
Sous réserve de modifications!  
Modificaciones reservadas!  
Sob reserva de alterações!  
70  

Accessory Power Camera Accessories bg 7d User Manual
Audiovox Car Video System UV7I User Manual
BenQ LCD Monitor XL2410T User Manual
Canon HFR16 User Manual
Canon MR 14EXl User Manual
Canon zr10 User Manual
Clarion VRX775VD User Manual
Dual XDVD8130 User Manual
Haier HFP400SS User Manual
JBL CS3 User Manual