Alpine Electronics Car Stereo System CDE 103EBT User Manual

R
EN  
CT  
®
MP3/WMA/AAC CD Receiver with Bluetooth  
CDE-103EBT  
MP3/WMA/AAC CD Receiver  
CDE-102E/CDE-101E/  
CDE-101EM  
• OWNER’S MANUAL  
Please read before using this equipment.  
用戶手冊  
請在使用本設備之前先閱讀用戶手冊。  
ALPINE ELECTRONICS MARKETING, INC.  
1-1-8 Nishi Gotanda,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
161-165 Princes Highway, Hallam  
Victoria 3803, Australia  
ALPINE ITALIA S.p.A.  
Viale C. Colombo 8, 20090 Trezzano  
Sul Naviglio (MI), Italy  
Shinagawa-ku,  
Tokyo 141-0031, Japan  
Phone 03-5496-8231  
Phone 03-8787-1200  
Phone 02-484781  
ALPINE ELECTRONICS GmbH  
Frankfurter Ring 117, 80807 München, Germany  
Phone 089-32 42 640  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal de Gamarra 36, Pabellón, 32  
01013 Vitoria (Alava)-APDO 133, Spain  
Phone 945-283588  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS OF U.K. LTD.  
Alpine House  
Fletchamstead Highway, Coventry CV4 9TW, U.K.  
Phone 0870-33 33 763  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
ALPINE ELECTRONICS (BENELUX) GmbH  
Leuvensesteenweg 510-B6,  
1930 Zaventem, Belgium  
ALPINE ELECTRONICS OF CANADA, INC.  
777 Supertest Road, Toronto,  
Ontario M3J 2M9, Canada  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 02-725-13 15  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,  
B.P. 50016, 95945 Roissy Charles de Gaulle  
Cedex, France  
DAESUNG ELTEC CO., LTD.  
Phone 031-711-1731  
Phone 01-48638989  
YAMAGATA (Wuxi) Co., Ltd.  
Block 28-25, Changjiang Nanlu, WND, jiangsu, China  
Designed by ALPINE Japan  
Printed in China (Y)  
68-09359Z76-B  
BLUETOOTH (CDE-103EBT only)  
iPhone/iPod (Optional)  
Setup Before Using ......................................... 18  
About Bluetooth .......................................... 18  
Before Using Hands-Free Function ............ 18  
How to connect to a Bluetooth compatible  
device (Pairing) ........................................ 18  
Playback ..........................................................23  
Searching for a desired Song ..........................23  
Quick Search ...................................................23  
Direct Search Function ....................................24  
Select Playlist/Artist/Album/  
Genre/Composer ..........................................24  
Bluetooth SETUP ........................................... 18  
Bluetooth Setup Operation .......................... 18  
Setting the Bluetooth Device ...........................19  
Setting the Search Mode ..................................19  
Setting the Received Calls automatically  
(Auto Answer) ..............................................19  
Deleting a Bluetooth Device from the list .......19  
Displaying the phone service provider  
name .............................................................19  
Adjusting the volume for the microphone  
input .............................................................19  
Selecting the output speaker ............................19  
Displaying the firmware version ......................19  
Updating the firmware .....................................19  
Random Play Shuffle (M.I.X.) ........................24  
Repeat Play .....................................................25  
Displaying the Text .........................................25  
Information  
In Case of Difficulty ........................................26  
Specifications ..................................................29  
Installation and Connections  
Hands-Free Phone Control ............................. 20  
About the Hands-Free Phone ...................... 20  
Answering a Call ......................................... 20  
Hanging up the Telephone ........................... 20  
Redial Function ........................................... 20  
Warning ...................................................30  
Caution ...................................................30  
Precautions ............................................30  
Installation .......................................................31  
Calling ......................................................... 20  
Redialing a Number In Outgoing History ........20  
Dialing a Number In Incoming History ...........20  
Dialing a Number In Incoming Missed Call  
History ..........................................................20  
Dialing a Number In The Phone Book ............21  
Mounting the Microphone  
(CDE-103EBT only) ....................................31  
Connections .....................................................32  
Voice Dial Operation ...................................... 21  
Adjusting the volume when receiving  
a Call ........................................................... 21  
Call Switching Operation ............................... 21  
USB memory (Optional)  
Controlling USB memory (Optional) ............. 21  
Playing MP3/WMA/AAC Files with the USB  
memory (Optional) ...................................... 21  
USB Memory Connection (Optional) ............. 22  
About MP3/WMA/AAC File of  
USB Memory .............................................. 22  
2-EN  
Operating Instructions  
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN  
INSERTION SLOTS OR GAPS.  
WARNING  
Doing so may result in personal injury or damage to the product.  
WARNING  
This symbol means important instructions.  
Failure to heed them can result in serious injury  
or death.  
CAUTION  
This symbol means important instructions.  
Failure to heed them can result in injury or  
material property damage.  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.  
Failure to do so may cause personal injury or damage to the  
product. Return it to your authorized Alpine dealer or the nearest  
Alpine Service Centre for repairing.  
Any function that requires your prolonged attention should only be  
performed after coming to a complete stop. Always stop the vehicle  
in a safe location before performing these functions. Failure to do  
so may result in an accident.  
PRECAUTIONS  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL  
HEAR OUTSIDE NOISES WHILE DRIVING.  
Product Cleaning  
Excessive volume levels that obscure sounds such as emergency  
vehicle sirens or road warning signals (train crossings, etc.) can be  
dangerous and may result in an accident. LISTENING AT LOUD  
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING  
DAMAGE.  
Use a soft dry cloth for periodic cleaning of the product. For more  
severe stains, please dampen the cloth with water only. Anything  
else has the chance of dissolving the paint or damaging the plastic.  
Temperature  
Be sure the temperature inside the vehicle is between +60°C  
(+140°F) and –10°C (+14°F) before turning your unit on.  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking ahead of  
the vehicle and cause an accident.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the player and  
wait about an hour for the moisture to evaporate.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged discs. Playing  
result in fire, etc.  
a bad disc could severely damage the playback mechanism.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE  
REACH OF CHILDREN.  
Swallowing them may result in serious injury. If swallowed,  
consult a physician immediately.  
Maintenance  
If you have problems, do not attempt to repair the unit yourself.  
Return it to your Alpine dealer or the nearest Alpine Service  
Station for servicing.  
USE THE CORRECT AMPERE RATING WHEN REPLACING  
FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result in fire.  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in fire,  
electric shock or other injury.  
3-EN  
Never Attempt the Following  
Installation Location  
Do not grip or pull out the disc while it is being pulled back into the  
player by the automatic reloading mechanism.  
Do not attempt to insert a disc into the unit when the unit power is  
off.  
Make sure this unit will not be installed in a location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Correct Handling  
Do not drop the disc while handling. Hold the disc so you will not  
leave fingerprints on the surface. Do not affix tape, paper, or  
gummed labels to the disc. Do not write on the disc.  
CORRECT  
Inserting Discs  
Your player accepts only one disc at a time for playback. Do not  
attempt to load more than one disc.  
Make sure the label side is facing up when you insert the disc.  
“ERROR” will be displayed on your player if you insert a disc  
incorrectly. If “ERROR” continues to be displayed even though the  
disc has been inserted correctly, push the RESET switch with a  
pointed object such as a ballpoint pen.  
INCORRECT  
CORRECT  
Playing a disc while driving on a very bumpy road may result in  
skips, but this will not scratch the disc or damage the player.  
Disc Cleaning  
New Discs  
Fingerprints, dust, or soil on the surface of the disc could cause the  
CD player to skip. For routine cleaning, wipe the playing surface  
with a clean, soft cloth from the centre of the disc to the outer edge.  
If the surface is heavily soiled, dampen a clean, soft cloth in a  
solution of mild neutral detergent before cleaning the disc.  
To prevent the CD from jamming, “ERROR” is displayed if discs  
with irregular surfaces are inserted or if discs are inserted  
incorrectly. When a new disc is ejected immediately after initial  
loading, use your finger to feel around the inside of the centre hole  
and outside edge of the disc. If you feel any small bumps or  
irregularities, this could inhibit proper loading of the disc. To  
remove the bumps, rub the inside edge of the hole and outside edge  
of the disc with a ballpoint pen or other such instrument, then insert  
the disc again.  
Centre Hole  
Centre Hole  
New Disc  
Disc Accessories  
There are various accessories available on the market for protecting  
the disc surface and improving sound quality. However, most of  
them will influence the thickness and/or diameter of the disc. Using  
such accessories can cause the disc to be out of standard  
specifications and may create operational problems. We  
recommend not using these accessories on discs played in Alpine  
CD players.  
Outside  
(Bumps)  
Bumps  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and never use  
any special shape discs.  
Use of special shape discs may cause damage to the mechanism.  
Transparent Sheet  
Disc Stabilizer  
4-EN  
On handling Compact Discs (CD/CD-R/CD-RW)  
Do not touch the surface.  
Do not expose the disc to direct sunlight.  
Do not affix stickers or labels.  
Clean the disc when it is dusty.  
Make sure that there are no bumps around the disc.  
Do not use commercially available disc accessories.  
CAUTION  
Alpine accepts no responsibility for lost data, etc., even if data, etc.  
is lost while using this product.  
On Handling USB Memory  
To prevent malfunction or damage, note the following points.  
Read the USB memory Owner’s Manual thoroughly.  
Do not touch the terminals by hand or metal.  
Do not subject USB memory to excessive shock.  
Do not bend, drop, disassemble, modify or soak in the water.  
Avoid usage or storage in the following locations:  
Anywhere in the car exposed to direct sunlight or high  
temperatures.  
Anywhere the possibility of high humidity or corrosive  
substances are present.  
Fix the USB memory in a location where driver operation will  
not be hindered.  
Do not leave the disc in the car or the unit for a long time. Never  
expose the disc to direct sunlight. Heat and humidity may damage  
the CD and you may not be able to play it again.  
To customers using CD-R/CD-RW  
If a CD-R/CD-RW cannot be played back, make sure the last  
recording session was closed (finalised).  
Finalize the CD-R/CD-RW if necessary, and attempt playback  
again.  
USB memory may not function correctly at high or low temperature.  
The USB flash memory supports only 512 or 2,048 bytes per  
sector.  
About media that can be played  
Use only compact discs with the label side showing the CD logo  
Use only certified USB memory. Note that even certified USB  
memory, may not function correctly depending on its type or state.  
USB memory function is not guaranteed. Use USB memory  
according to the terms of agreement.  
Depending on the settings of the USB memory type, memory  
state or encoding software, the unit may not play back or display  
properly.  
marks below.  
A file that is copy-protected (copyright protection) cannot be  
played back.  
If you use unspecified compact discs, correct performance cannot  
be guaranteed.  
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-  
ReWritables) which have been recorded only on audio devices.  
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC  
formatted audio files.  
USB memory may take time to start playback. If there is a  
particular file other than audio in the USB memory, it may take  
considerable time before the file is played back or searched.  
The unit can play back “mp3”, “wma” or “m4a” file extensions.  
Do not add the above extensions to a file other than audio data.  
This non-audio data will not be recognised. The resulting playback  
may contain noise that can damage speakers and/or amplifiers.  
It is recommended to back up important data on a personal computer.  
Do not remove the USB device while playback is in progress.  
Change SOURCE to something other than USB, then remove the  
USB device to prevent possible damage to its memory.  
Some of the following CDs may not play on this unit:  
Flawed CDs, CDs with fingerprints, CDs exposed to extreme  
temperatures or sunlight (e.g., left in the car or this unit), CDs  
recorded under unstable conditions, CDs on which a recording  
failed or a re-recording was attempted, copy-protected CDs  
which do not conform to the audio CD industry standard.  
Use discs with MP3/WMA/AAC files written in a format  
compatible with this unit. For details, see pages 10-11.  
ROM data other than audio files contained in a disc will not  
produce sound when played back.  
Windows Media and the Windows logo are trademarks, or  
registered trademarks of Microsoft Corporation in the United  
States and/or other countries.  
iPod is a trademark of Apple Inc., registered in the U.S. and  
other countries.  
iPhone is a trademark of Apple Inc.  
“Made for iPod” means that an electronic accessory has been  
designed to connect specifically to iPod and has been certified by  
the developer to meet Apple performance standards.  
Works with iPhone” means that an electronic accessory has  
been designed to connect specifically to iPhone and has been  
certified by the developer to meet Apple performance standards.  
Apple is not responsible for the operation of this device or its  
compliance with safety and regulatory standards.  
The Bluetooth word mark and logos are owned by the Bluetooth  
SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is  
under licence. Other trademarks and trade names are those of  
their respective owners.  
Protecting the USB connection terminal  
Only a USB memory can be connected to the USB connection  
terminal on this unit. Correct performance using other USB  
products cannot be guaranteed. A USB hub is not supported.  
Do not connect a USB memory over 20 mm wide. Also, avoid  
connecting USB memory and Front Aux at the same time.  
If a USB device is inserted in the unit, it projects out and may be  
a danger while driving. Use a commercially available USB  
extension cable, and connect it in a safe way.  
Depending on the connected USB memory device, the unit may  
not function or some functions may not be performed.  
The audio file format that can be played back on the unit is  
MP3/WMA/AAC.  
Artist/song name, etc., can be displayed, however characters  
may not be correctly displayed.  
“MPEG Layer-3 audio coding technology licensed from  
Fraunhofer IIS and Thomson.”  
“Supply of this product only conveys a license for private,  
non-commercial use and does not convey a license nor imply  
any right to use this product in any commercial (i.e. revenue-  
generation) real time broadcasting (terrestrial, satellite, cable  
and/or any other media), broadcasting/streaming via internet,  
intranets and/or other networks or in other electronic content  
distribution systems, such as pay-audio or audio-on-demand  
applications. An independent license for such use is required.  
5-EN  
Attaching  
Getting Started  
1
2
Insert the right side of the front panel into the main  
unit. Align the groove on the front panel with the  
projections on the main unit.  
Rotary encoder  
Push the left side of the front panel until it locks  
firmly into the main unit.  
SOUND/SETUP  
SOURCE/  
(Release)  
/MUTE  
/
/ENT  
Before attaching the front panel, make sure that there is no dirt or  
dust on the connector terminals and no foreign object between the  
front panel and the main unit.  
Attach the front panel carefully, holding the sides of the front panel to  
avoid pushing buttons by mistake.  
* This illustrator is CDE-103EBT.  
Accessory List  
Initial System Start-Up  
Be sure to press the RESET switch when using the unit for the first  
time, after changing the car battery, etc.  
Head unit ............................................................................1  
Power cable........................................................................1  
Microphone (4m) (CDE-103EBT only)..............................1  
Mounting sleeve.................................................................1  
Carrying case.....................................................................1  
Bracket key.........................................................................2  
Screw (M5 × 8)....................................................................4  
Owner’s Manual .......................................................... 1 set  
1
2
3
Turn off the unit power.  
Remove the detachable front panel.  
Press RESET with a ballpoint pen or similar pointed  
object.  
Turning Power On and Off  
Press SOURCE/ to turn on the unit.  
The unit can be turned on by pressing any other button except  
(Release).  
and  
Press and hold SOURCE/ for at least 2 seconds to  
turn off the unit.  
RESET switch  
The first time power is turned on, the volume will start from level 12.  
Adjusting Volume  
Detaching and Attaching the Front Panel  
Turn the Rotary encoder until the desired sound is  
obtained.  
Detaching  
1
2
Turn off the unit power.  
Lowering Volume Quickly  
Press  
(Release) at the lower left side until the  
Activating the Audio Mute function will instantly lower the volume  
level by 20 dB.  
front panel pops out.  
3
Grasp the left side of the front panel and pull it out.  
Press  
/MUTE to activate the MUTE mode.  
The audio level will decrease by about 20 dB.  
Pressing  
/MUTE again will bring the audio back to its  
previous level.  
The front panel may become hot in normal usage (especially the  
connector terminals on the back of the front panel). This is not a  
malfunction.  
To protect the front panel, place it in the supplied carrying case.  
When detaching the front panel, do not apply excessive force as it  
may result in malfunction.  
6-EN  
Setting Time  
Radio  
1
2
Press and hold SOUND/SETUP for at least  
2 seconds to activate the SETUP mode.  
SOURCE/  
BAND  
Turn the Rotary encoder to select the CLOCK ADJ  
mode, and then press  
/
/ENT.  
The time indication will blink.  
3
Turn the Rotary encoder to adjust the hours while  
the time indication is blinking.  
4
5
When the hour has been adjusted, press  
/
/ENT.  
TUNE/A.ME  
Preset buttons  
(1 through 6)  
Turn the Rotary encoder to adjust the minutes  
while the time indication is blinking.  
* This illustrator is CDE-103EBT.  
6
Press and hold SOUND/SETUP for at least 2  
seconds to return to normal mode.  
Listening to Radio  
To synchronise the clock to another clock/watch or radio time  
announcement, press and hold  
/
/ENT for at least 2 seconds  
after setting the “hour.Minutes will reset to “00”. If the display  
shows over “30” minutes when you do this, the time will advance one  
hour.  
1
2
Press SOURCE/ to select TUNER mode.  
Press BAND repeatedly until the desired radio band  
is displayed.  
Pressing  
/MUTE will return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
F1 (FM1)  
F2 (FM2)  
AM  
F1 (FM1)  
3
Press TUNE/A.ME to select the tuning mode.  
Controllable with Remote Control  
This unit can be controlled with an optional Alpine  
DX SEEK (Distance mode)  
SEEK (Local mode)  
remote control. For details, consult your Alpine dealer.  
OFF (Manual mode)  
DX SEEK  
Point the optional remote control transmitter at the  
remote-control sensor.  
The initial mode is Distance mode.  
Remote control sensor  
Distance mode:  
Both strong and weak stations will be automatically tuned in  
(Automatic Seek Tuning).  
Local mode:  
Only strong stations will be automatically tuned in (Automatic  
Seek Tuning).  
Manual mode:  
The frequency is manually tuned in steps (Manual tuning).  
4
Press  
Holding down  
continuously.  
or  
to tune in the desired station.  
or  
will change the frequency  
Presetting Stations Manually  
1
2
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
Press and hold, for at least 2 seconds, any one of the  
preset buttons (1 through 6) into which you wish  
to store the station.  
The selected station is stored.  
The display shows the band, preset number and station  
frequency memorized.  
A total of 18 stations can be stored in the preset memory (6 stations  
for each band; FM1, FM2 and AM).  
If you store a station in a preset memory which already has a station,  
the current station will be cleared and replaced with the new station.  
7-EN  
Presetting Stations Automatically  
CD/MP3/WMA/AAC  
1
2
Press BAND repeatedly until the desired radio band  
is displayed.  
SOURCE/  
Rotary encoder  
Press and hold TUNE/A.ME for at least 2 seconds.  
The frequency on the display continues to change while the  
automatic memory is in progress. The tuner will  
automatically seek and store 6 strong stations in the  
selected band. They will be stored into preset buttons 1 to 6  
in order of signal strength.  
When the automatic memory has been completed, the tuner  
goes to the station stored in preset location No.1.  
1
2
VIEW  
/MUTE  
4 5  
If no stations are stored, the tuner will return to the original station  
you were listening to before the auto memory procedure began.  
/
/ENT  
/ESC  
* This illustrator is CDE-103EBT.  
Tuning to Preset Stations  
Playback  
1
2
Press BAND repeatedly until the desired band is  
displayed.  
1
Insert a disc with the label side facing up.  
The disc will be pulled into the unit automatically, and the  
” indicator lights up .  
Press any one of the station preset buttons  
(1 through 6) that has your desired radio station in  
memory.  
The display shows the band, preset number and frequency  
of the station selected.  
When a disc is already inserted, press SOURCE/ to  
switch to the DISC mode.  
The mode will change every time the button is pressed.  
1
2
TUNER  
DISC  
USB AUDIO  
iPod* /AUX+*  
3
4
BT AUDIO*  
AUX*  
TUNER  
1
* Displayed only when the iPhone/iPod is connected and AUX+  
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”  
(page 17).  
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
the AUX+ SETUP Mode” (page 17).  
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT  
3
ADAPTER. Refer to “Bluetooth Setting” (page 16).  
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/  
4
CDE-102E only)” (page 15).  
2
While playing back MP3/WMA/AAC, press 1  
2 to select the desired folder.  
or  
Pressing and holding 1  
or  
2 will change folders  
continuously.  
8-EN  
CD mode :  
3
Press  
or  
to select the desired track (file).  
Returning to the beginning of the current track (file):  
Press  
.
: Only a track is repeatedly played back.  
Fast backward:  
Press and hold  
.
Advancing to the beginning of the next track (file):  
MP3/WMA/AAC mode :  
Press  
.
Fast forward:  
: Only a file is repeatedly played back.  
: Only files in a folder are repeatedly played back.  
Press and hold  
.
4
To pause playback, press  
Pressing /ENT again will resume playback.  
/
/ENT.  
/
5
To eject the disc, press  
.
Do not remove a CD during its eject cycle. Do not load more than  
one disc at a time. A malfunction may result from doing either.  
M.I.X. (Random Play)  
If the CD does not eject, press and hold  
for at least 2 seconds.  
The “  
” indicator lights up when a disc is inserted.  
Three-inch (8 cm) CDs cannot be used.  
The CD-player can play discs containing audio data, MP3 data,  
WMA data and AAC data.  
WMA format files that are protected by DRM (Digital Rights  
Management), AAC format files that have been purchased from the  
iTunes Store and files that are copy-protected (copyright protection)  
cannot be played back on this unit.  
Press 5  
in the play or pause mode.  
The tracks (files) on the disc will be played back in random  
sequence.  
To cancel M.I.X. play, press 5  
again.  
CD mode :  
The track display for MP3/WMA/AAC data playback is the file  
numbers recorded on the disc.  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
: The tracks are played back in random sequence.  
MP3/WMA/AAC Play Display  
The folder number and file number will be displayed as  
described below.  
MP3/WMA/AAC mode :  
: Only files in a folder are played back in  
random sequence.  
F101 T103  
: The files are played back in random sequence.  
Folder number File number  
display  
display  
Press VIEW to switch the display. See “Displaying the Text”  
(page 14) for information about display switching.  
* In the USB mode, all files stored in the USB memory are played back  
in random sequence, and the “  
” indicator lights up.  
Repeat Play  
Press  
4 to play back repeatedly the track being  
played.  
The track (file) will be played repeatedly.  
Press  
4 again and select off to deactivate repeat play.  
9-EN  
Searching for CD Text  
Quick Search  
On discs utilizing CD Text, songs can be searched and played by using  
their recorded titles. For discs without CD Text, searches are made  
using the track numbers associated with each song.  
You can search for tracks (files).  
1
Press and hold  
CD/MP3/WMA/AAC mode to activate Quick Search  
/ESC for at least 2 seconds in the  
1
2
Press  
/ESC during play.  
mode.  
This will set the search mode, and the “  
up.  
” indicator lights  
The “ ” indicator lights up.  
2
Turn the Rotary encoder to select a desired track  
(file).  
The selected track is played back immediately.  
Turn the Rotary encoder to select the desired  
track, and then press /ENT.  
This will play the selected track.  
/
Press and hold  
/ESC for at least 2 seconds in the search mode to  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
When CD Text Search is made during M.I.X. play, the M.I.X. play  
mode will be cancelled.  
About MP3/WMA/AAC  
File/Folder Name Search  
(concerning MP3/WMA/AAC)  
CAUTION  
Except for private use, duplicating audio data (including  
MP3/WMA/AAC data) or distributing, transferring, or copying it,  
whether for free or for a fee, without permission of the copyright  
holder is strictly prohibited by the Copyright Act and by  
international treaty.  
Folder and file names may be searched and displayed during playback.  
1
2
During MP3/WMA/AAC playback, press  
activate the search mode.  
The “ ” indicator lights up.  
/ESC to  
What is MP3?  
Turn the Rotary encoder to select Folder Name  
Search mode or File Name Search mode, and then  
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a  
compression standard prescribed by the ISO, the International  
Standardization Organization and MPEG which is a joint activity  
institution of the IEC.  
press  
/
/ENT.  
MP3 files contain compressed audio data. MP3 encoding is  
capable of compressing audio data at extremely high ratios,  
reducing the size of music files to as much as one-tenth their  
original size. This is achieved while still maintaining near CD  
quality. The MP3 format realises such high compression ratios  
by eliminating the sounds that are either inaudible to the human  
ear or masked by other sounds.  
Folder Name Search mode  
3
Turn the Rotary encoder to select the desired  
folder.  
4
Press and hold  
play back the first file in the selected folder.  
/
/ENT for at least 2 seconds to  
What is WMA?  
Press and hold /ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
WMA, or “Windows Media™ Audio,” is compressed audio data.  
WMA is similar to MP3 audio data and can achieve CD quality  
sound with small file sizes.  
To search for files in the Folder Name Search mode, press  
/
/ENT. Files in the folder may be searched.  
What is AAC?  
Press  
/MUTE to exit Folder Name Search mode in step 3 in order  
AAC is the abbreviation for “Advanced Audio Coding,” and is a  
basic format of audio compression used by MPEG2 or MPEG4.  
to select File Name Search mode.  
The root folder is displayed as “  
”.  
When Folder Name Search is made during M.I.X. play, the M.I.X.  
play mode will be cancelled.  
Method for creating MP3/WMA/AAC files  
Audio data is compressed using software with MP3/WMA/AAC  
codecs. For details on creating MP3/WMA/AAC files, refer to the  
user’s manual for that software.  
File Name Search mode  
MP3/WMA/AAC files that are playable on this device have the  
file extensions “mp3” / “wma” / “m4a.” Files with no extension  
cannot be played back (WMA ver. 7.1, 8 and 9 are supported).  
Protected files are not supported, neither are raw AAC files  
(using the “.aac” extension).  
3
4
Press 1  
or  
2 to select another Folder.  
Select the desired file by turning the Rotary  
encoder.  
There are many different versions of the AAC format. Confirm  
that the software being used conforms to the acceptable  
formats listed above. It’s possible that the format may be  
unplayable even though the extension is valid.  
5
Press  
/
/ENT to play back the selected file.  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
Playback of AAC files encoded by iTunes is supported.  
Press  
/MUTE in the search mode to return to the previous mode.  
When File Name Search is made during M.I.X. play, the M.I.X. play  
mode will be cancelled.  
10-EN  
Supported playback sampling rates and bit rates  
Order of files  
Files are played back in the order that the writing software writes  
MP3  
them to the disc. Therefore, the playback order may not be what  
is expected. Verify the writing order in the software’s  
documentation. The playback order of the folders and files is as  
follows.  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,  
16 kHz, 12 kHz, 11.025 kHz, 8 kHz  
Bit rates:  
8 - 320 kbps  
WMA  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz  
Bit rates:  
48 - 192 kbps  
Root folder  
AAC  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,  
16 kHz, 12 kHz, 11.025 kHz, 8 kHz  
Bit rates:  
16 - 320 kbps  
This device may not play back correctly depending on sampling  
rates.  
ID3 tags/WMA tags  
This device supports ID3 tag v1 and v2, and WMA tag.  
If tag data is in an MP3/WMA/AAC file, this device can display  
the title (track title), artist name, and album name ID3 tag/WMA  
tag data.  
This device can only display single-byte alphanumeric  
characters (up to 30 for ID3 tags and up to 15 for WMA tags)  
and the underscore. For non-supported characters, “NO  
SUPPORT” is displayed.  
If information contains characters other than ID3 tag information,  
the audio file may not be played back.  
The tag information may not be correctly displayed, depending  
on the contents.  
Folder  
MP3/WMA/AAC File  
* The folder No./ folder Name will not be displayed if no file is  
contained in the folder.  
Producing MP3/WMA/AAC discs  
MP3/WMA/AAC files are prepared, then written to a CD-R or  
CD-RW using CD-R writing software. A disc can hold up to 510  
files/folders (including Root Folders), and the maximum number  
of folders is 255.  
Playback may not be performed if a disc exceeds the limitations  
described above.  
Terminology  
Bit rate  
This is the “sound” compression rate specified for encoding. The  
higher the bit rate, the higher the sound quality, but also the larger  
the files.  
Media supported  
The media that this device can play back are CD-ROMs, CD-Rs,  
and CD-RWs.  
Sampling rate  
This value shows how many times per second the data is sampled  
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,  
so the sound is sampled (recorded) 44,100 times per second. The  
higher the sampling rate, the higher the sound quality, but also the  
larger the volume of data.  
Corresponding File Systems  
This device supports discs formatted with ISO9660 Level 1 or  
Level 2.  
Under the ISO9660 standard, there are some restrictions to  
remember.  
Encoding  
Converting music CDs, WAVE (AIFF) files, and other sound files into  
the specified audio compression format.  
The maximum nested folder depth is 8 (including the root  
directory). The number of characters for a folder/file name is  
limited.  
Valid characters for folder/file names are letters A-Z (all caps),  
numbers 0-9, and ‘_’ (underscore).  
Tag  
Song information such as track titles, artist names, album names,  
etc., written into MP3/WMA/AAC files.  
This device also can play back discs in Joliet, Romeo, etc., and  
other standards that conform to ISO9660. However, sometimes  
the file names, folder names, etc., are not displayed correctly.  
Root folder  
The root folder (or root directory) is found at the top of the file  
system. The root folder contains all folders and files. It is created  
automatically for all burned discs.  
Formats supported  
This device supports CD-ROM XA, Mixed Mode CD, Enhanced  
CD (CD-Extra) and Multi-Session.  
This device cannot correctly play back discs recorded with  
Track At Once or packet writing.  
11-EN  
Setting the Bass Control  
Sound Setting  
You can change the Bass Frequency emphasis to create your own tonal  
preference.  
Rotary encoder (AUDIO/LOUD)  
SOURCE/  
BAND  
1
Press SOUND/SETUP repeatedly to select the  
BASS mode.  
BASS  
TREBLE  
HPF  
BASS  
Setting the Bass Centre Frequency  
2-1 Press BAND to select the desired bass centre  
frequency.  
/ESC  
SOUND/SETUP  
80 Hz  
100 Hz  
200 Hz  
60 Hz  
80 Hz  
* This illustrator is CDE-103EBT.  
Emphasises the displayed bass frequency ranges.  
Setting the Bass Bandwidth  
Adjusting Subwoofer Level/Bass Level/  
Treble Level/Balance (Between Left and  
Right)/Fader (Between Front and Rear)/  
Defeat  
2-2 Press SOURCE/ to select the desired bass  
bandwidth.  
1
Press Rotary encoder (AUDIO) repeatedly to  
choose the desired mode.  
Changes the boosted bass bandwidth to wide or narrow. A  
wider setting will boost a wide range of frequencies above  
and below the centre frequency. A narrower setting will  
boost only frequencies near the centre frequency.  
Each press changes the mode as follows:  
SUBWOOFER*  
BASS LEVEL  
VOLUME  
TRE LEVEL  
BALANCE  
FADER DEFEAT  
SUBWOOFER  
Subwoofer : +0 ~ +15  
Bass level: –7 ~ +7  
Treble level: –7 ~ +7  
Balance : L15 ~ R15  
Fader : R15 ~ F15  
Defeat : ON/OFF  
Setting the Bass Level  
1
2-3* Turn the Rotary encoder to select the desired  
bass level (–7~+7).  
You can emphasise or weaken the bass level.  
Volume : 0 ~ 35  
3
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
If no operation is performed for 5 seconds after selecting the  
SUBWOOFER, BASS LEVEL, TRE LEVEL, BALANCE, FADER or  
DEFEAT mode, the unit automatically returns to normal mode.  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
The bass level settings will be individually memorized for each  
source (FM, AM, CD, etc.) until the setting is changed. The bass  
frequency and bass bandwidth settings adjusted for one source are  
effective for all other sources (FM, AM, CD, etc.).  
* When the subwoofer mode is set to OFF, its level cannot be adjusted.  
2
Turn the Rotary encoder until the desired sound is  
obtained in each mode.  
By setting DEFEAT ON, previously adjusted settings of  
BASS LEVEL and TRE LEVEL will return to the factory  
defaults.  
The function is inoperable when DEFEAT is set to ON.  
1
* The adjustment can also be made by pressing Rotary encoder.  
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/  
Balance (Between Left and Right)/Fader (Between Front and Rear)/  
Defeat” (page 12).  
12-EN  
Setting the Treble Control  
Turning Loudness On/Off  
You can change the Treble Frequency emphasis to create your own tonal  
preference.  
Loudness introduces a special low- and high-frequency emphasis at low  
listening levels. This compensates for the ear’s decreased sensitivity to  
bass and treble sound.  
1
Press SOUND/SETUP repeatedly to select the  
TREBLE mode.  
Press and hold Rotary encoder (LOUD) for at least 2  
seconds to activate or deactivate the loudness mode.  
BASS  
TREBLE  
HPF  
BASS  
The function is inoperable when DEFEAT is set to ON.  
Setting the Treble Centre Frequency  
2-1 Press BAND to select the desired treble centre  
frequency.  
10.0 kHz  
12.5 kHz  
15.0 kHz  
17.5 kHz  
10.0 kHz  
Emphasises the displayed treble frequency ranges.  
Setting the Treble Level  
2
2-2* Turn the Rotary encoder to select the desired  
treble level (–7~+7).  
You can emphasise the treble level.  
3
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
The treble level settings will be individually memorized for each  
source (FM, AM, CD, etc.) until the setting is changed. The Treble  
frequency settings adjusted for one source are effective for all other  
sources (FM, AM, CD, etc.).  
The function is inoperable when DEFEAT is set to ON.  
2
* The adjustment can also be made by pressing Rotary encoder.  
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/  
Balance (Between Left and Right)/Fader (Between Front and Rear)/  
Defeat” (page 12).  
Adjusting the High Pass Filter  
The High Pass Filter on this unit can be adjusted to suit your personal  
taste.  
1
Press SOUND/SETUP repeatedly to select the HPF  
mode.  
BASS  
TREBLE  
HPF  
BASS  
2
Turn the Rotary encoder to select the desired HPF  
frequency.  
OFF  
60 Hz  
80 Hz  
100 Hz  
All frequencies above the selected cutoff are output.  
3
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
The function is inoperable when DEFEAT is set to ON.  
13-EN  
About the indication display  
When displaying Text, the following indicators are lit  
according to the mode.  
Other Functions  
Indicator/  
Mode  
MP3/WMA/AAC/  
USB AUDIO  
Mode  
SOURCE/  
iPhone/iPod/BT  
AUDIO* Mode  
CD Mode  
4
2
Folder Name*  
––  
––  
––  
being displayed  
1
1
Artist Name*  
Artist Name*  
being displayed being displayed  
VIEW  
1
1
Text (Disc  
Album Name* Album Name*  
* This illustrator is CDE-103EBT.  
3
Name* ) being being displayed being displayed  
displayed  
1
1
Displaying the Text  
Text (Track  
Song Name* / Song Name*  
Name* ) being File Name being being displayed  
displayed displayed  
3
Text information, such as the disc name and the track name, will be  
displayed if playing a CD text compatible disc. It is also possible to  
display the folder name, the file name and the tag, etc., while playing  
MP3/WMA/AAC files.  
1
* Tag information  
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is  
displayed.  
* The root folder of disc is displayed as “FOLDER”. The root folder of  
USB memory is displayed as “ROOT”.  
2
Press VIEW.  
The display will change every time the button is pressed.  
3
* If there is no Text (Disc Name or Track Name), “DISC TEXT”/  
When the TEXT SCR is set to SCR MANU, press and hold VIEW for  
at least 2 seconds, the current text will be scrolled one time (except  
Radio mode).  
“TRACK TEXT” is displayed.  
* CDE-102E/CDE-101E/CDE-101EM only.  
4
About “Text”  
The display in Radio mode:  
FREQUENCY CLOCK  
Text:  
FREQUENCY  
Text compatible CDs contain text information such as the disc  
name and track name. Such text information is referred to as  
“text.”  
The display in CD mode:  
TRACK NO./ELAPSED TIME  
TRACK NO./CLOCK  
TEXT (TRACK NAME)*  
1
1
Some characters may not be displayed correctly with this device,  
depending on the character type.  
“NO SUPPORT” is displayed when the desired text information  
cannot be displayed on this unit.  
The text or tag information may not be correctly displayed,  
depending on the contents.  
TEXT (DISC NAME)*  
TRACK NO./ELAPSED TIME  
The display in MP3/WMA/AAC mode:  
FILE NO./ELAPSED TIME  
FOLDER NO./FILE NO.  
FILE NO./CLOCK  
FOLDER NAME  
FILE NAME  
SONG NAME*  
2
2
2
ARTIST NAME*  
ALBUM NAME*  
FILE NO./ELAPSED TIME  
The display in AUX mode (CDE-103EBT/CDE-102E only):  
AUX NAME AUX NAME/CLOCK AUX NAME  
Displaying Time  
Press VIEW repeatedly until the time is displayed.  
Each press changes the display.  
For details, see “Displaying the Text” (page 14).  
The display in BT AUDIO mode (CDE-102E/CDE-101E/CDE-101EM  
only):  
The Following display will be shown only when a telephone or  
Bluetooth Streaming device with Metadata capabilities is  
correctly connected with a Bluetooth INTERFACE (KCE-400BT).  
(Alpine KCE-400BT) (Sold Separately). (For details on Bluetooth  
INTERFACE, refer to the Owner’s Manual of KCE-400BT).  
Selecting any tuner or CD function while in the clock priority mode  
will interrupt the time display momentarily. The function selected  
will be displayed for about 5 seconds before the time returns to the  
display.  
2
BT A/ELAPSED TIME  
BT A/CLOCK  
ARTIST NAME*  
2
2
ALBUM NAME*  
SONG NAME*  
BT A/ELAPSED TIME  
1
* Displayed during playback of a disc with CD text.  
2
* ID3 tag/WMA tag  
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,  
the ID3 tag/WMA tag information is displayed (e.g., song name,  
artist name, and album name). All other tag data is ignored.  
14-EN  
Using the Front AUX Input Terminal  
(CDE-103EBT/CDE-102E only)  
SETUP  
You can flexibly customize the unit to suit your own preferences and  
usage. From the SETUP menu, Sound Customizing, Visual  
Customizing, etc., can be modified.  
Connect a portable music player, etc. by simply connecting it to the  
input on the front panel. An optional adapter cable is required (standard  
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).  
SOURCE/  
Press SOURCE/ , and select the AUX mode to listen to  
the portable device.  
Rotary encoder (AUDIO) SOUND/SETUP  
1
2
TUNER  
BT AUDIO*  
DISC  
USB AUDIO  
iPod* /AUX+*  
3
AUX TUNER  
1
* Displayed only when the iPhone/iPod is connected and  
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP  
Mode” (page 17).  
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
2
/
/ENT  
/MUTE  
the AUX+ SETUP Mode” (page 17).  
3
* CDE-102E/CDE-101E/CDE-101EM only. Displayed only when BT  
IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16).  
* This illustrator is CDE-103EBT.  
Use steps 1 to 4 to select one of the SETUP modes to  
modify. See the applicable section below for details  
about the selected SETUP item.  
Portable player, etc.  
Main unit  
1
2
Press and hold SOUND/SETUP for at least  
2 seconds to activate the SETUP mode.  
Turn the Rotary encoder to select the desired  
SETUP menu, and then press  
(e.g. Select SUBWOOFER)  
/
/ENT.  
1
2
3
BT IN*  
CLOCK ADJ*  
PLAY MODE  
INT MUTE*  
4
5
AUX+ SETUP  
POWER IC  
ILLUMINATI*  
AUX+ NAME*  
DEMO SUBWOOFER  
DIMMER*  
AUX NAME*  
SUBW SYS*  
SCROLLTYPE TEXT SCR  
or  
6
7
8
BT IN  
Optional adapter cable (RCA pin  
plugs [red, white] 3.5ø miniplugs)  
or (3.5ø miniplugs)  
1
* Displayed only when INT MUTE is set to OFF, and the mode is set to  
other than BT AUDIO.  
* Refer to “Setting Time” (page 7).  
* Displayed only when BT IN is OFF.  
* Displayed only when AUX+ SETUP is ON.  
* CDE-103EBT/CDE-102E only.  
* Displayed only when SUBWOOFER is ON.  
* CDE-103EBT only.  
* CDE-103EBT/CDE-102E/CDE-101E only.  
2
3
4
5
6
7
8
3
4
Turn the Rotary encoder to change the setting.  
(e.g. Select SUBW ON or SUBW OFF.)  
Press and hold SOUND/SETUP for at least 2  
seconds to return to normal mode.  
Press  
/MUTE to return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
15-EN  
Scroll Type Setting  
SCR TYPE1 / SCR TYPE2 (Initial setting)  
Bluetooth Setting  
Choose from two scrolling methods.  
Select the type you prefer.  
Setting the Bluetooth Connection (BT IN)  
BT ADAPTER / BT OFF (Initial setting)  
SCR TYPE1:  
The characters scroll from right to left, a  
single character at a time.  
With Bluetooth technology, you can place a hands-free call by a  
Bluetooth-equipped mobile phone.  
SCR TYPE2:  
Words are built up from left to right, a single  
character at a time. When the display is filled,  
it is cleared and the remaining words are  
displayed the same way until all words of the  
title have been shown.  
CDE-102E/CDE-101E/CDE-101EM:  
If an optional Buletooth INTERFACE (KCE-400BT) is connected,  
make this setting when the Bluetooth function is used. For  
details, refer to the Owner’s Manual of the optional Bluetooth  
INTERFACE (KCE-400BT). Set ADAPTER when the Bluetooth  
INTERFACE (KCE-400BT) is connected.  
Scroll Setting (TEXT SCR)  
SCR AUTO / SCR MANU (Initial setting)  
The  
button can be used only when the optional Bluetooth  
INTERFACE (KCE-400BT) is connected.  
If the mobile phone compatible with the Voice Dial function is  
connected, the Voice Dial function can be used.  
This CD player can scroll the disc and track names recorded on  
CD-TEXT discs, as well as the text information of MP3/WMA/AAC  
files, folder names and tags.  
CDE-103EBT:  
Set ADAPTER when the Bluetooth function is used. For details  
SCR AUTO:  
The CD text information, the text information of  
folder and file names, and the tags are  
scrolled automatically.  
The display is scrolled when a disc is loaded  
or when a track is changed, etc.  
on the set up procedure, refer to “Bluetooth SETUP” on page 18.  
Sound Customizing  
SCR MANU:  
Subwoofer On and Off  
SUBW ON (Initial setting) / SUBW OFF  
The unit scrolls CD text names, folder names, file names or tag  
display.  
When the subwoofer is on, perform the steps below to adjust the  
subwoofer output level.  
Demonstration  
DEMO ON / DEMO OFF (Initial setting)  
1 In the normal mode, press Rotary encoder (AUDIO)  
repeatedly to select the SUBWOOFER mode.  
This unit has a demonstration feature for the display.  
SUBWOOFER  
FADER  
BASS LEVEL  
DEFEAT VOLUME  
TRE LEVEL  
BALANCE  
To quit Demo mode, set to DEMO OFF.  
SUBWOOFER  
2 Adjust the level by turning the Rotary encoder.  
MP3/WMA/AAC  
Setting the Subwoofer System  
SUBW SYS 1 (Initial setting) / SUBW SYS 2  
Playing MP3/WMA/AAC Data (PLAY MODE)  
CD-DA (Initial setting) / CDDA/MP3  
Select either SYS 1 or SYS 2 for the desired subwoofer effect.  
This unit can play back CDs containing both CD and MP3/WMA/AAC  
data (created in Enhanced CD (CD Extra) format). However, in some  
situations, playback of an enhanced CD may be difficult. In this case,  
you can select playback of a single session only, containing the CD data.  
When a disc contains both CD and MP3/WMA/AAC data, playback  
starts from the CD data portion of the disc.  
SUBW SYS 1: Subwoofer level changes according to the main  
volume setting.  
SUBW SYS 2: Subwoofer level change is different from the main  
volume setting. For example, even at low volume  
settings, the subwoofer is still audible.  
Visual Customizing  
CD-DA:  
Only the CD data in Session 1 can be played back.  
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and  
Changing Lighting Colour (CDE-103EBT only)  
multi-session discs can be played back.  
ILUM TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4  
Perform this setting before inserting a disc. If a disc has already been  
inserted, remove it first.  
You can change the lighting colour of the following four buttons.  
SOURCE/ , BAND,  
,
.
TYPE1 :  
TYPE2 :  
TYPE3 :  
TYPE4 :  
When the colour of the four buttons is blue,  
the colour of the other is red.  
When the colour of the four buttons is green,  
the colour of the other is green.  
When the colour of the four buttons is amber,  
the colour of the other is red.  
When the colour of the four buttons is red,  
the colour of the other is red.  
External Device  
Turning Mute Mode On/Off (INT MUTE)  
MUTE ON / MUTE OFF (Initial setting)  
If a device having the interrupt feature is connected, audio will be  
automatically muted whenever the interrupt signal is received from the  
device.  
Dimmer Control (CDE-103EBT/CDE-102E/CDE-101E only)  
DIM AUTO (Initial setting) / DIM MANUAL  
Set the DIMMER control to AUTO to decrease the illumination  
brightness of the unit with the head lights of the vehicle ON. This mode  
is useful if you feel the unit’s backlighting is too bright at night.  
The function is inoperable when the ILLUMINATI is set to other than  
TYPE1 for CDE-103EBT, refer to “Changing Lighting Colour  
(CDE-103EBT only)” on page 16.  
16-EN  
Connecting to an External Amplifier (POWER IC)  
Setting the AUX+ SETUP Mode  
POW ON (Initial setting) / POW OFF  
AUX+ ON / AUX+ OFF (Initial setting)  
When an external amplifier is connected, sound quality can be improved  
by stopping the power supply of the built-in amplifier.  
An external device (such as a portable music player) can be connected  
to the Full Speed connector of this unit. A conversion cable  
(KCE-237B) for building up the AUX IN (optional) is required.  
POW OFF:  
Use this mode when the line output of this unit  
is used to drive an external amplifier. In this  
setting, the head unit’s internal amplifier is  
turned OFF and cannot drive speakers.  
A portable music device and an iPhone/iPod cannot be connected to the  
Full Speed connector at the same time.  
CDE-103EBT/CDE-102E:  
AUX+ ON: Set to ON when a portable device is connected. If  
SOURCE/ is pressed and AUX+ is selected, the  
sound of the portable device is input to the unit.  
Front  
left  
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.  
Amplifier  
Amplifier  
You can change the AUX+ name display when AUX+ SETUP is set to  
Front  
right  
ON. Press  
/
/ENT when AUX+ SETUP is set to ON, and select  
/ENT.  
AUX+ NAME by turning the Rotary encoder, then press  
/
Rear  
left  
After that, turn the Rotary encoder to select the desired AUX+ name.  
Rear  
right  
Setting the AUX NAME mode (CDE-103EBT/CDE-102E  
only)  
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE* / GAME  
1
2
CDE-101E/CDE-101EM:  
You can change the AUX NAME display in the SETUP mode.  
Front  
left  
1
*
*
After the setting is completed, AUX is displayed on the unit.  
After the setting is completed, PMD is displayed on the unit.  
2
Amplifier  
Front  
right  
POW ON :  
The speakers are driven by the built-in  
amplifier.  
Speakers  
SPEAKER  
RIGHT FRONT  
Front  
right  
SPEAKER  
RIGHT REAR  
Rear  
right  
SPEAKER  
LEFT REAR  
Rear  
left  
SPEAKER  
LEFT FRONT  
Front  
left  
No sound is produced by the system when the power output is set to  
OFF.  
17-EN  
How to connect to a Bluetooth compatible  
device (Pairing)  
BLUETOOTH  
For details on the control from a Bluetooth compatible device, refer to  
the Owner’s Manual of the Bluetooth compatible device.  
(CDE-103EBT only)  
1
2
Set a Bluetooth connection from a Bluetooth  
compatible device.  
Rotary encoder  
SOUND/SETUP  
/VOICE DIAL  
The PIN code (“0000”) is displayed on the connected  
unit.  
The PIN code is fixed as “0000.”  
3
Input the PIN code (“0000”) in a Bluetooth  
compatible device.  
4
If this unit is successfully connected to a Bluetooth  
compatible device, “CONNECTED” is displayed, and  
then the unit returns to normal mode.  
1
2
/MUTE/  
/
/ENT  
The registration number 5 is the guest mode. Content that is  
registered as the guest mode is deleted when you set ignition from  
ACC to OFF. If all the 5 positions (including guest mode) have been  
registered, you cannot register the 6th device. To register another  
device, you need to delete one of the device from position1 to 5 first.  
If a Bluetooth compatible device is successfully connected, the next  
time when the ignition key of the car is turned to on, the unit will  
automatically connect to the previously connected device. However,  
the connection may fail. If the auto connection fails, try the  
connection manually.  
* This illustrator is CDE-103EBT.P  
Setup Before Using  
About Bluetooth  
Bluetooth is a wireless technology allowing communication between a  
mobile device or personal computer over short distances. This enables a  
hands-free call or data transmission between Bluetooth compatible  
devices.  
Set “Setting the Search Mode” (page 19) to VISI M ON to enable this  
unit to recognise a mobile phone. For mobile phone passkey  
(passcode) input operation, refer to the mobile’s Owner’s Manual.  
Depending on the Bluetooth version, a Bluetooth compatible device  
may not be able to communicate with this unit.  
Proper function of this unit with all Bluetooth compatible devices is  
not guaranteed. For handling of the BT compatible device, consult  
your ALPINE dealer or ALPINE website.  
Depending on the surroundings, Bluetooth wireless connection may  
be unstable.  
When you place a call, or perform setup operations, be sure to stop  
your car in a safe place.  
Bluetooth SETUP  
Bluetooth Setup Operation  
The following steps 1 to 4 are common to the various Bluetooth  
functions. For details, refer to each individual function.  
Depending on the connected Bluetooth compatible device(s), the  
function may differ. Also refer to the Owner’s Manual of the  
connected device(s).  
While calling, Bluetooth Setup operation cannot be performed.  
Set “BT IN” to BT ADAPTER, and then perform Bluetooth SETUP  
operation.  
1
2
Press and hold SOUND/SETUP for at least 2  
seconds to activate the SETUP mode.  
Before Using Hands-Free Function  
Before using the hands-free phone/audio function, the following  
settings need to be made.  
Turn the Rotary encoder to select the desired  
items and then press  
/
/ENT.  
1
Be sure to set “INT MUTE” to OFF. Refer to the  
SETUP function on page 15.  
BT IN PAIRED DEV*  
VISIBLE M*  
AUTO ANS*  
CLEAR DEV*  
SPEAKER SL*  
SEV NAME* MIC INPUT*  
FW VERSION* FW UPDATE*  
To enable sound pass-through of the Bluetooth compatible device,  
make sure that INT MUTE is turned OFF (Initial setting on the unit  
is OFF).  
* When “BT IN” is set to BT ADAPTER, the above items are  
displayed.  
2
Set “BT IN” to BT ADAPTER (page 16).  
3
4
Turn the Rotary encoder to change the settings.  
Before using a hands-free phone, it must be paired with this unit.  
Refer to “Bluetooth SETUP” (pages 18-19).  
Press and hold SOUND/SETUP for at least  
2 seconds.  
The SETUP mode is cancelled.  
18-EN  
Setting the Bluetooth Device  
Displaying the phone service provider name  
Select one of 5 connected Bluetooth compatible devices that you  
previously registered (the fifth registered by guest mode*).  
Setting item : SEV NAME  
The service provider name of the connected Bluetooth compatible  
device will be displayed. If a Bluetooth compatible device is not  
connected, “ID UNSENT” will also be displayed.  
Setting item: PAIRED DEV  
Turn the Rotary encoder to select a Bluetooth  
compatible device you want to use (you want to change  
Depending on the character type some phone service provider name  
cannot be displayed.  
connection) and then press  
/
/ENT  
.
If the connection is successfully changed, “CONNECTED” is  
displayed for 2 seconds and the indicator lights up, then the  
display returns to the SETUP screen.  
Adjusting the volume for the microphone input  
You can emphasise or weaken the microphone input volume level.  
If you input the wrong passcode or communications fail, “FAILED”  
is displayed.  
If you want to connect another Bluetooth compatible device, after  
disconnecting the current Bluetooth compatible device, connect the  
Bluetooth compatible device you want to change to.  
The PIN code is fixed as “0000”.  
Setting item : MIC INPUT  
Turn the Rotary encoder to select the desired volume level (0~7).  
The setting cannot be adjusted during a phone call. Adjust the setting  
before placing a call.  
Selecting the output speaker  
* Guest mode:  
You can select the connected speaker in car to output the sound signal of  
telephone.  
Use this mode for a temporary pairing. Registration (in guest mode)  
is cancelled once the ignition key goes from ACC to off.  
Setting item : SPEAKER SL  
Setting the Search Mode  
ALL:  
F-L:  
The sound be output from all of speakers in car.  
The sound only be output from the front left  
speaker.  
You can set whether this unit can be recognised or not from a Bluetooth  
compatible device. Normally set this to VISI M ON.  
F-R:  
The sound only be output from the front right  
speaker.  
Setting item: VISIBLE M  
VISI M ON:  
Enable recognition of this unit from the  
Bluetooth compatible device.  
F-LR:  
The sound be output from the front left and front  
right speaker.  
VISI M OFF: Disable recognition of this unit from the  
The setting cannot be adjusted during a phone call. Adjust the setting  
before placing a call.  
Bluetooth compatible device.  
Depending on the mobile phone, it may be necessary to input a  
passcode. For inputting the mobile phone’s passcode, refer to the  
mobile phone’s Owner’s Manual.  
Displaying the firmware version  
Setting item : FW VERSION  
The current firmware version will be displayed.  
Setting the Received Calls automatically (Auto Answer)  
When a call is received, you can set whether to receive it automatically  
or not.  
Updating the firmware  
Setting item: FW UPDATE  
Setting item: AUTO ANS  
With this setting, the Bluetooth firmware update function can be  
activated, but other devices and software may be required. For details,  
consult ALPINE website.  
AT ANS ON: When a call is received, it will be taken  
automatically.  
AT ANS OFF: When a call is received, it will not be  
received automatically, press  
call.  
to receive a  
Even if this setting is set to ON/OFF, the received call setting on the  
mobile phone takes priority.  
Deleting a Bluetooth Device from the list  
You can delete the history of a previously connected Bluetooth  
compatible device.  
Setting item: CLEAR DEV  
1
Turn the Rotary encoder to select the Bluetooth  
compatible device to be deleted and then press  
/
/ENT.  
2
Turn the Rotary encoder to select CLEAR YES if  
you want to delete and then press  
/
/ENT.  
Selecting CLEAR NO will cancel the setting.  
19-EN  
Calling  
Hands-Free Phone Control  
Call History is recorded for the last dialed/received/missed calls. There  
are various ways of making calls based on the “Calling.” The following  
steps 1 to 5 are common to the various ways of making these calls. For  
details, refer to each individual category for making calls.  
About the Hands-Free Phone  
Hands-free calls are possible when using a HSP (Head Set Profile) and  
HFP (Hands-Free Profile) compatible mobile phone with this unit.  
1
2
Press  
.
Avoid answering a hands-free call in heavy traffic or on narrow or  
winding streets.  
Close the windows while calling to reduce background noise.  
If both calling parties are using hands-free devices, or the call is  
made in a noisy location, difficulty hearing the other person’s voice  
is normal.  
The outgoing method list is displayed.  
Turn the Rotary encoder to select the outgoing  
mode.  
Setting items  
: DIALED / RECEIVED / MISSED /  
PHONE BOOK  
Depending on telephone line conditions or certain mobile devices  
used, voices may sound unnatural.  
When using a microphone, speak as directly as you can into the  
microphone to pick up the best sound quality.  
DIALED  
: Dialed history  
: Received history  
: Missed incoming history  
RECEIVED  
MISSED  
PHONE BOOK : Mobile phonebook  
Certain mobile phone features are dependent on the capabilities and  
settings of your service provider’s network. Additionally, certain  
features may not be activated by your service provider, and/or the  
provider’s network settings may limit the feature’s functionality.  
Always contact your service provider about feature availability and  
functionality.  
All features, functionality, and other product specifications, as well  
as the information contained in the Owner’s Manual are based upon  
the latest available information and are believed to be accurate at  
the time of printing.  
3
Press  
/
/ENT.  
The outgoing mode is activated, and each mode list is  
displayed.  
It may take some time for the list to be displayed, and also directly  
after connection, the list may not be brought up to date.  
4
Turn the Rotary encoder to select a name or a  
telephone number from the list.  
Alpine reserves the right to change or modify any information or  
specifications without notice or obligation.  
The names of PHONE BOOK are listed alphabetically with the same  
beginning alphabetical character, and can be skipped to the next  
alphabetical character by pressing 1  
the section beginning with alphabet B from A.  
or  
2. e.g. Press  
2 to  
Answering a Call  
5
Press /ENT.  
/
Incoming calls are announced by the received call ring tone and a  
displayed message (PHONE).  
The selected telephone will be called.  
If one name has several numbers registered in the telephone  
Press  
.
book, press /ENT after selecting the name*, then turn the  
/
The call starts.  
Rotary encoder to choose the desired number and press  
/
/
/ENT, the telephone will be called. Press and hold  
/ENT for at least 2 seconds after selecting the name, the  
When “Setting the Received Calls automatically (Auto Answer)”  
(page 19) is set to AT ANS ON, you can receive a call automatically.  
While calling, the source sound on the unit is muted. After calling,  
playback will resume.  
default number of the name will be called. Depending on the  
connected mobile phone, this function may not be performed.  
* If the name cannot be recognised, default number will be displayed.  
The names registered in the telephone book are displayed. If the  
name is not registered, a number is displayed. If both name and  
number cannot be displayed, “ID UNSENT” will be displayed.  
If you place a call directly from the paired mobile phone, the phone  
number is not displayed, you cannot redial from the unit in this case.  
Hanging up the Telephone  
Press and hold  
for at least 2 seconds.  
The call finishes.  
While receiving you can also hang up by pressing and holding  
for at least 2 seconds.  
Redialing a Number In Outgoing History  
Previously dialed telephone numbers are stored in dialed calls history.  
You can redial a number by searching from dialed calls history.  
Redial Function  
You can redial the person you have previously called.  
Setting item: DIALED  
After finishing a call “----------” will be displayed, press  
within 5 seconds.  
Dialing a Number In Incoming History  
Telephone numbers from received calls are stored in the Received List.  
You can redial these numbers by searching here.  
The telephone is redialed.  
If you receive a call from an unknown number, you cannot use the  
redial function to call back.  
Setting item: RECEIVED  
Dialing a Number In Incoming Missed Call History  
Telephone numbers for received calls that are missed, are stored in the  
Missed List. You can redial these numbers by searching here.  
Setting item: MISSED  
20-EN  
Dialing a Number In The Phone Book  
Up to 1,000 telephone numbers are downloadable from a mobile phone.  
Dial a call by selecting a person from the phone book list.  
USB memory (Optional)  
Setting item: PHONE BOOK  
If a name cannot be obtained via the phonebook, “  
displayed.  
The order of the list display depends on the design of the mobile  
phone.  
If the call history or phonebook of the mobile phone is added or  
” is  
deleted while it is connected to the unit, the list displayed on the unit  
may not be brought up to date. If it is not updated, you cannot  
correctly place a call.  
/
/ENT  
SOURCE/  
* This illustrator is CDE-103EBT.  
Voice Dial Operation  
Controlling USB memory (Optional)  
You can call the telephone by performing voice operation.  
1
Press and hold /VOICE DIAL for at least  
2 seconds.  
The speak mode is activated, and “SPEAK” is displayed.  
A USB memory device may be connected to this unit. With USB  
memory connected, playback of files on the device is controlled from  
this unit.  
2
Say the telephone number, name you want to call  
into the microphone.  
The controls on this unit for USB memory operation are operative  
only when a USB memory is connected.  
You can perform this operation only when a voice dial compatible  
mobile phone is connected. If the mobile phone is not compatible  
with the voice dial, “NO SUPPORT” is displayed for 2 seconds.  
The Voice Dial function performance depends on the recognition  
range of the mobile phone and mounting location of the microphone.  
Note when the microphone is mounted.  
Playing MP3/WMA/AAC Files with the  
USB memory (Optional)  
If you connect a USB memory containing MP3/WMA/AAC, you can  
play these files on this unit.  
Voice dial operation depends on the function of the mobile phone.  
For details, refer to the Owner’s Manual of the mobile phone.  
If a called person that you say is not found, “NO CALL” is displayed  
for 2 seconds.  
If you place a call via voice dial, you cannot display a phone number  
or name.  
1
Press SOURCE/ to switch to the USB AUDIO  
mode.  
The mode will change every time the button is pressed.  
1
2
TUNER  
DISC  
USB AUDIO  
iPod* /AUX+*  
3
4
BT AUDIO*  
AUX*  
TUNER  
Adjusting the volume when receiving a  
Call  
1
* Displayed only when the iPhone/iPod is connected and  
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP  
Mode” (page 17).  
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
While calling, you can adjust the volume.  
the AUX+ SETUP Mode” (page 17).  
3
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT  
Turn the Rotary encoder to adjust the volume.  
ADAPTER. Refer to “Bluetooth Setting” (page 16).  
4
You may need to increase volume from your regular audio listening  
source level. However, increasing the volume excessively may result  
in feedback. If feedback is noticed as feedback is directly related to  
the volume, turn down the volume as low as acceptable to eliminate  
it. Positioning the microphone in a direction away from the main car  
speakers (e.g. clipped on sun visor) may also reduce feedback at high  
volume.  
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/  
CDE-102E only)” (page 15).  
2
To pause playback, press  
/
/ENT.  
Pressing /ENT again will resume the playback.  
/
The root folder is displayed as “ROOT” in the Folder Name Search  
mode.  
When a search is made in the USB mode, any song being played back  
will be stopped.  
This unit plays back files on a USB memory device with the same  
controls and modes as playback of CDs containing MP3/WMA/AAC.  
For details, refer to “CD/MP3/WMA/AAC” on pages 8 to 11.  
Before disconnecting USB memory, be sure to change to another  
source or set to pause.  
Call Switching Operation  
While making a call, this function allows you to initiate the transfer of  
the audio between the mobile phone and the speakers in the car.  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
While calling, press and hold  
/
/ENT for at least  
2 seconds to switch the call sound between the unit and  
mobile phone.  
Depending on the mobile phone, this operation may not be  
performed.  
21-EN  
USB Memory Connection (Optional)  
iPhone/iPod (Optional)  
Connect USB memory  
SOURCE/  
1
2
Open the cover of the USB connection terminal.  
1
4
6
5
2
Rotary encoder  
Connect the USB memory directly to the USB  
connection terminal, or via the USB cable.  
This unit  
USB Connection Terminal  
USB memory  
(Sold Separately)  
or  
/
VIEW  
/
ENT Preset buttons  
(1 through 6)  
/MUTE  
/ESC  
Cable (Sold  
Separately)  
USB memory  
(Sold Separately)  
* This illustrator is CDE-103EBT.  
An iPhone/iPod can be connected to this unit by using the proprietary  
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold  
Remove USB memory  
separately). When this unit is connected by using the cable, the controls  
on the iPod are not functional.  
1
Carefully, pull out the USB memory from the USB  
cable or the USB connection terminal.  
Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer  
to “Setting the AUX+ SETUP Mode” on page 17).  
If the Bluetooth INTERFACE (KCE-400BT) and an iPhone/iPod are  
connected at the same time, be sure to disconnect the iPhone/iPod  
from Bluetooth INTERFACE (KCE-400BT) while turning ACC to  
OFF (CDE-102E/CDE-101E/CDE-101EM only).  
If you connect an iPhone to this unit, it can be used as an iPod. If you  
use iPhone as a hands-free phone, use the unit (CDE-103EBT only)  
in which the Bluetooth function is built, or use the Bluetooth  
INTERFACE (KCE-400BT) (sold separately) (CDE-102E/  
CDE-101E/CDE-101EM only).  
Internet and telephone functions of iPod touch or iPhone, etc., can  
also be used when connecting to the unit. However, using these  
functions will stop or pause the playing songs, at this time do not  
operate the unit to avoid a malfunction.  
2
Close the cover of the USB connection terminal.  
Change to a source other than the USB memory mode, then remove  
the USB memory. If the USB memory is removed in the USB memory  
mode, data may be damaged.  
When removing USB memory, pull it out straight.  
If sound is not output or USB memory is not recognised even when  
USB memory is connected, remove USB memory once, then connect  
it again.  
Route the USB cable away from other cables, etc.  
After removing the USB memory, close the cover of the USB  
connection terminal to prevent dust or foreign objects from entering  
and causing a malfunction.  
Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to  
high temperature and humidity conditions, and damage may result.  
About MP3/WMA/AAC File of USB  
Memory  
iPhone/iPod models usable with this unit  
The unit can be used with the following iPhone/iPod models.  
Playing back MP3/WMA/AAC  
MP3/WMA/AAC files are prepared, then stored to a USB  
memory. This unit can recognise at least 100 folders (including  
root folder) and 100 files per folder stored in USB memory.  
Playback may not be performed if a USB memory exceeds the  
limitations described above.  
iPhone 3G (version 2.0)  
iPhone (version 1.1.4)  
iPod touch (version 1.0.4)  
iPod classic (version 1.1.1)  
iPod nano (3 rd generation) (version 1.1)  
iPod nano (2nd generation) (version 1.1.3)  
iPod with video (version 1.2.3)  
iPod nano (1st generation) ( version 1.3.1)  
Do not make a file’s playback time more than 1 hour.  
Media supported  
This device can play back USB memory media.  
For clarity in identifying your model of iPod, please see  
Apple’s own document “Identifying iPod models” at  
Corresponding File Systems  
This device supports FAT 12/16/32 for USB memory device.  
This unit does not support video playback from iPhone/iPod,  
even using a video-compatible cable.  
If the unit is used with versions of iTunes earlier than 7.6,  
correct function and performance are not guaranteed.  
22-EN  
1
2
Press  
The “  
/ESC to activate the search selection mode.  
” indicator lights up.  
Playback  
Turn the Rotary encoder to select the ARTIST  
search mode, and then press /ENT.  
1
Press SOURCE/ to switch to the iPod mode.  
/
1
2
TUNER  
DISC  
USB AUDIO  
iPod* /AUX+*  
PLAYLIST  
GENRE  
ARTIST  
COMPOSER  
ALBUM  
SONG  
PODCAST  
PLAYLIST  
3
4
BT AUDIO*  
AUX*  
TUNER  
AUDIOBOOK  
1
* Displayed only when the iPhone/iPod is connected and  
3
4
Turn the Rotary encoder to select the desired  
Artist, and then press /ENT.  
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP  
Mode” (page 17).  
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
the AUX+ SETUP Mode” (page 17).  
* Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT  
ADAPTER. Refer to “Bluetooth Setting” (page 16).  
* Refer to “Using the Front AUX Input Terminal (CDE-103EBT/  
CDE-102E only)” (page 15).  
/
2
Turn the Rotary encoder to select the desired  
Album, and then press /ENT.  
3
/
4
5
Turn the Rotary encoder to select the desired  
Song, and then press  
/
/ENT.  
After pressing and holding  
in each hierarchy (except SONG and AUDIOBOOK hierarchy), all  
songs of the selected hierarchy are played back.  
/
/ENT for at least 2 seconds while  
2
Press  
or  
to select the desired song.  
Return to the beginning of the current song:  
Press  
.
After selecting [ALL] in the search mode with“*”, press and hold  
/
/ENT for at least 2 seconds to play back all songs in the  
Fast backward through current song:  
Press and hold  
iPhone/iPod or selected search mode.  
While in the search mode, if you press and hold  
.
/ESC for  
2 seconds, or no operation is performed for 10 seconds, the search  
mode is cancelled.  
Advance to the beginning of the next song:  
Press  
.
In the search mode, pressing  
mode.  
/MUTE will return to the previous  
Fast forward through current song:  
Press and hold  
.
When search is made during M.I.X. play, the M.I.X. play mode will be  
cancelled.  
“NO SONG” will be displayed if there are no songs in the selected  
playlist in the PLAYLIST search mode.  
“NO PODCAST” will be displayed if there is no podcast data in the  
iPhone/iPod in the PODCAST search mode.  
“NOAUDIOBOK” will be displayed if there is no audiobook data in  
the iPhone/iPod in the AUDIOBOOK search mode.  
If “iPod name” stored in the iPhone/iPod is selected in the desired  
3
To pause playback, press  
/
/ENT.  
Pressing /ENT again will resume playback.  
/
A song playing on the iPhone/iPod while it is connected to this unit  
will continue to play from where it was paused after disconnection.  
If you listen to an episode from a selected podcast or audiobook, the  
episode can be changed by pressing 1  
An episode may have several chapters, the chapter can be changed  
by pressing or  
or  
2.  
Playlist search mode, and  
all songs in the iPhone/iPod. Also, if you press and hold  
/
/ENT is pressed, you can search for  
/ENT  
.
/
for at least 2 seconds, all songs in the iPhone/iPod are played back.  
Depending on the iPhone/iPod, podcast search is not supported.  
If any one of the preset buttons (1 through 6) is pressed in the search  
mode, a search can be made quickly by skipping to the specified  
location. For details, refer to “Direct Search Function” on page 24.  
Searching for a desired Song  
An iPhone/iPod can contain hundreds of songs. By using file tag  
information and keeping these songs organized in playlists, this unit’s  
search functions will ease song searches.  
Each music category has its own individual hierarchy. Use the Playlist/  
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode  
to narrow searches based on the table below.  
Quick Search  
You can search a song from all songs in the iPhone/iPod without  
selecting an album, artist, etc.  
Hierarchy 1  
Playlist  
Hierarchy 2  
Song  
Hierarchy 3  
Hierarchy 4  
1
Press and hold  
activate the Quick Search mode.  
The “ ” indicator lights up.  
/ESC for at least 2 seconds to  
Song  
Artist*  
Album*  
Song  
Album*  
Song  
2
Turn the Rotary encoder to select a desired song.  
The selected song is played back immediately.  
Podcast  
Genre*  
Episode  
Artist*  
Album*  
Album*  
Song  
Song  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
Composer*  
Audiobook  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
If many songs are in the iPhone/iPod, it takes time to search for  
songs.  
If any one of the preset buttons (1 through 6) is pressed in the search  
mode, a search can be made quickly by skipping to the specified  
location. For details, refer to “Direct Search Function” on page 24.  
For example: Searching by Artist name  
The following example explains how an ARTIST search is performed.  
Another search mode can be used for the same operation, although the  
hierarchy differs.  
This function is inactive during repeat (  
) playback.  
23-EN  
Direct Search Function  
Random Play Shuffle (M.I.X.)  
The unit’s direct search function can be used to search for an album,  
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/  
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can  
quickly target any song.  
The Shuffle function of the iPhone/iPod is displayed as  
unit.  
on this  
Shuffle Albums:  
The songs on each album are played back in proper order. Upon  
completion of all the songs on the album, the next album is  
selected randomly. This continues until all albums have been  
played.  
In the search mode, press any one of the preset  
buttons (1 through 6) to quickly skip over a  
designated percent of your song content.  
Song search example:  
Shuffle Songs:  
If there are 100 songs in your iPhone/iPod, they are divided into  
6 groups using percentages (shown below). These groups are  
assigned to the preset buttons (1 through 6).  
Song shuffle randomly plays back songs within a selected  
category (playlist, album, etc.). The songs within the category  
are played just once until all songs have been played.  
Example 1:  
1
Press 5  
.
Suppose the song you are searching for is located at around  
the middle (50%) of your library: press button 4 to jump to the  
50th song and turn the Rotary encoder to find the desired  
song.  
The songs are played back in random sequence.  
(off)  
(Shuffle Albums)  
(Shuffle Songs)  
Example 2:  
Suppose the song you are searching for is located near the  
end (83%) of your library: press button 6 to jump to the 83rd  
song and turn the Rotary encoder to find the desired song.  
2
To cancel M.I.X. play, select (off) with the above  
procedure.  
If a song is selected in the album search mode before selecting M.I.X.  
play, the songs will not play back randomly even when Shuffle  
Albums is selected.  
All 100 songs (100%)  
0%  
1
17%  
33%  
50%  
67%  
83%  
6
Shuffle ALL:  
Preset  
buttons  
Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one  
song does not play back again until all songs have been played  
back.  
2
3
4
5
First  
17th  
33rd  
50th  
67th  
83rd  
Songs  
song song song song song song  
1
Press 6.  
The songs are played back in random sequence.  
Select Playlist/Artist/Album/Genre/  
Composer  
(off)  
(Shuffle ALL)  
2
To cancel M.I.X. play, select (off) with the above  
procedure.  
Playlist/Artist/Album/Genre/Composer can be easily changed.  
For example, if you listen to a song from a selected album, the album  
can be changed.  
If Shuffle ALL is selected, the selected songs being played back in the  
search mode are cancelled.  
Press 1  
or  
2 to select the desired Playlist/Artist/  
Album/Genre/Composer.  
If the song search mode was used to select a song, this function is  
inactive.  
If an album is selected during an artist search, other albums by that  
artist are searchable.  
This function is inactive during shuffle (  
) playback.  
24-EN  
Repeat Play  
Only Repeat One is available for the iPhone/iPod.  
Repeat One:  
A single song is repeatedly played back.  
1
Press  
4.  
The song is played back repeatedly.  
(off)  
(Repeat One)  
2
To cancel repeat play, select (off) with the above  
procedure.  
During repeat playback, no other songs are selectable by pressing  
or  
.
Displaying the Text  
You can display the tag information of a song in the iPhone/iPod.  
Press VIEW.  
Each press changes the display.  
When the TEXT SCR is set to SCR MANU, press and hold VIEW for  
at least 2 seconds, the current text will be scrolled one time.  
TRACK NO./ELAPSED TIME  
TRACK NO./CLOCK  
ALBUM NAME*  
TRACK NO./ELAPSED TIME  
ARTIST NAME*  
SONG TITLE*  
* TAG information  
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag  
information.  
Only alphanumeric characters (ASCII) can be displayed.  
If the artist, album or song name, created in iTunes, has too many  
characters, songs may not be played back when connected to the  
adapter. Therefore, a maximum of 250 characters is recommended.  
The maximum number of characters for the head unit is 64  
(64 byte).  
Some characters may not be correctly displayed.  
“NO SUPPORT” is displayed if text information is not supported by  
the unit.  
25-EN  
CD  
Information  
CD Player not functioning.  
Out of operating temperature range +50°C (+120°F) for CD.  
- Allow the vehicle’s interior (or trunk) temperature to cool.  
In Case of Difficulty  
CD playback sound is wavering.  
Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate (about 1  
hour).  
If you encounter a problem, please turn the power off, then on again. If  
the unit is still not functioning normally, please review the items in the  
following checklist. This guide will help you isolate the problem if the  
unit is at fault. Otherwise, make sure the rest of your system is properly  
connected or consult your authorized Alpine dealer.  
CD insertion not possible.  
A CD is already in the CD player.  
- Eject the CD and remove it.  
Basic  
The CD is being improperly inserted.  
- Make sure the CD is being inserted following instructions in  
the CD Player Operation section.  
No function or display.  
Vehicle’s ignition is off.  
- If connected following instructions, the unit will not operate  
with the vehicle’s ignition off.  
Unable to fast forward or backward the CD.  
The CD has been damaged.  
Improper power lead (Red) and battery lead (Yellow) connections.  
- Check power lead and battery lead connections.  
Blown fuse.  
- Check the fuse of the unit; replace with the proper value if  
necessary.  
Internal micro-computer malfunctioned due to interference noise  
etc.  
- Press the RESET switch with a ballpoint pen or other pointed  
article.  
- Eject the CD and discard it; using a damaged CD in your unit  
can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
Improper mounting of the unit.  
- Securely re-mount the unit.  
The disc is very dirty.  
- Clean the disc.  
The disc has scratches.  
- Change the disc.  
The pick-up lens is dirty.  
- Do not use a commercially available lens cleaner disc. Consult  
your nearest Alpine dealer.  
Radio  
Unable to receive stations.  
No antenna or open connection in cable.  
- Make sure the antenna is properly connected; replace the  
antenna or cable if necessary.  
CD playback sound skips without vibration.  
The disc is dirty or scratched.  
- Clean the disc; damaged disc should be replaced.  
Unable to tune stations in the seek mode.  
Error displays (built-in CD player only).  
You are in a weak signal area.  
Mechanical error.  
- Make sure the tuner is in the DX mode.  
- Press . After the error indication disappears, insert the disc  
again. If the above-mentioned solution does not solve the  
problem, consult your nearest Alpine dealer.  
If the area you are in is a primary signal area, the antenna may  
not be grounded and connected properly.  
- Check your antenna connections; make sure the antenna is  
properly grounded at its mounting location.  
The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken, replace the  
antenna with a new one.  
CD-R/CD-RW playback not possible.  
Close session (finalisation) has not been performed.  
- Perform finalisation and attempt playback again.  
MP3/WMA/AAC  
Broadcast is noisy.  
The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
The antenna is poorly grounded.  
MP3, WMA or AAC is not played back.  
Writing error occurred. The MP3/WMA/AAC format is not  
compatible.  
- Make sure the antenna is grounded properly at its mounting  
location.  
- Make sure the MP3/WMA/AAC has been written in a  
supported format. Refer to “About MP3/WMA/AAC”  
(pages 10-11), then rewrite in the format supported by this  
device.  
26-EN  
Audio  
Indication for USB memory  
The sound is not output from the speakers.  
Unit has no output signal of the internal amplifier.  
- POWER IC is switched to “POW ON” (page 17).  
Abnormal current is run to the USB connector device (an error  
message may be displayed if the USB device that is not  
compatible with the unit is connected).  
iPod  
iPod does not play and no sound is output.  
USB memory is a malfunction or it is shorted.  
- Connect another USB memory.  
The iPod has not been recognised.  
- Reset this unit and the iPod. Refer to “Initial System Start-Up”  
(page 6). To reset the iPod, refer to the Owner’s Manual of the  
iPod.  
UNIT ERROR  
Indication for CD Player  
A USB device that is not supported by the unit is connected.  
- Connect a USB device that is supported by the unit.  
No CD is inserted.  
- Insert a CD.  
Although a disc is inserted, “NO DISC” is displayed and the unit  
does not start to play or eject the disc.  
- Remove the disc by following these steps:  
NO DEVICE  
A USB memory is not connected.  
- Make sure the USB memory device is correctly connected and  
the cable is not excessively bent.  
Press the  
button again for at least 2 seconds.  
If the disc still does not eject, consult your Alpine dealer.  
No song (file) is stored in the USB memory.  
- Connect the USB memory device after storing songs (files).  
Mechanism error.  
1) Press the button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
2) When the error indication remains after ejecting, press the  
button again.  
A sampling rate/bit rate not supported by the unit is used.  
- Use a sampling rate/bit rate that is supported by the unit.  
If the error indication still does not turn off after pressing the  
button for a few times, consult your Alpine dealer.  
When “ERROR” is displayed:  
If the disc cannot be ejected by pressing , press the RESET switch  
A copy-protected WMA file was played back.  
- You can only play back non-copy-protected files.  
(refer to page 6) and press  
again.  
If the disc still cannot be ejected, consult your Alpine dealer.  
NO SUPPORT  
Text information that is not recognizable by the unit has been input.  
- Use a USB memory device with input text information that is  
supported by the unit.  
A copy-protected WMA file was played back.  
- You can only play back non-copy-protected files.  
A sampling rate/bit rate not supported by the unit is used.  
- Use a sampling rate/bit rate that is supported by the unit.  
27-EN  
Indication for iPod Mode  
The iPhone/iPod is not connected.  
- Make sure the iPhone/iPod is correctly connected (refer to  
“Connections”).  
Make sure the cable is not bent excessively.  
There are no songs in the iPhone/iPod.  
- Download songs to the iPhone/iPod and connect to this unit.  
Communication error.  
- Turn the ignition key off, and then set to ON again.  
- Reset the iPod.  
- Check the display by reconnecting between the iPhone/iPod  
and this unit, using the iPhone/iPod cable.  
Caused by the iPhone/iPod Software Version not being compatible with  
this unit.  
-
Update the iPhone/iPod Software Version to be compatible with  
this unit.  
The iPhone/iPod is not verified.  
- Reset the iPod.  
- Try another iPhone/iPod, if available.  
Power surge error.  
Excessive voltage/current is supplied to the iPhone/iPod.  
- Try another iPhone/iPod, if available.  
Bluetooth mode  
The Bluetooth device is not connected.  
- Connect the Bluetooth device.  
Indication for all Modes  
Malfunction occurred as a result of the speaker cable shorting on  
the car chassis.  
- Route the cable correctly, and set POWER IC to POW ON  
(page 17).  
If the above solution does not work, consult your nearest  
dealer.  
28-EN  
GENERAL  
Specifications  
Power Requirement  
14.4 V DC  
(11-16 V allowable)  
50 W × 4  
FM TUNER SECTION  
Maximum Power Output  
Tuning Range  
87.5-108.0 MHz  
Maximum Pre-Output Voltage  
2 V/10 k ohms  
14 dB at 100 Hz  
14 dB at 10 kHz  
1.5 kg (3 lbs. 4 oz)  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity  
Signal-to-Noise Ratio  
Stereo Separation  
9.3 dBf (0.8 µV/75 ohms)  
Bass  
13.5 dBf (1.3 µV/75 ohms)  
Treble  
Weight  
80 dB  
65 dB  
35 dB  
2.0 dB  
CHASSIS SIZE  
Width  
Height  
Depth  
178 mm (7")  
50 mm (2")  
Capture Ratio  
AM TUNER SECTION  
161 mm (6-3/8")  
Tuning Range  
531-1,602 kHz  
22.5 µV/27 dB  
NOSEPIECE SIZE  
Sensitivity (IEC Standard)  
Width  
Height  
Depth  
170 mm (6-3/4")  
46 mm (1-13/16")  
25 mm (1")  
CD PLAYER SECTION  
Frequency Response  
Wow & Flutter (% WRMS)  
Total Harmonic Distortion  
Dynamic Range  
5-20,000 Hz ( 1 dB)  
Below measurable limits  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
Due to continuous product improvement, specifications and design  
are subject to change without notice.  
Signal-to-Noise Ratio  
Channel Separation  
85 dB (at 1 kHz)  
PICKUP  
Wave length  
Laser power  
795 nm  
CLASS I  
USB SECTION  
USB requirements  
Max. Power Consumption  
USB Class  
USB 1.1/2.0  
500 mA  
Mass Storage  
File System  
FAT 12/16/32  
MP3 Decoding  
MPEG-1/2 AUDIO Layer-3  
Windows Media™ Audio  
AAC-LC format “.m4a” file  
2-Channel (Stereo)  
5-20,000 Hz ( 1 dB)  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
WMA Decoding  
AAC Decoding  
Number of Channels  
Frequency Response*  
Total Harmonic Distortion  
Dynamic Range  
Signal-to-Noise Ratio  
Channel Separation  
85 dB (at 1 kHz)  
* Frequency response may differ depending on the encoder  
software/bit rate.  
BLUETOOTH SECTION (CDE-103EBT Only)  
Bluetooth Specification  
Bluetooth V 2.0  
Output Power  
HFP  
+4 dBm Max. (Power class 2)  
(Hands-Free Profile)  
(Head Set Profile)  
HSP  
29-EN  
Installation and Connections  
Before installing or connecting the unit, please read the  
following and pages 3 to 5 of this manual thoroughly for  
proper use.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.  
The wiring and installation of this unit requires special technical  
skill and experience. To ensure safety, always contact the dealer  
where you purchased this product to have the work done.  
Warning  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire or product  
damage.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM  
SECURELY.  
Be sure to use only the specified accessory parts. Use of other than  
designated parts may damage this unit internally or may not  
securely install the unit in place. This may cause parts to become  
loose resulting in hazards or product failure.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM THE  
NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due to  
electrical shorts.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
Route the cables and wiring away from moving parts (like the seat  
rails) or sharp or pointed edges. This will prevent crimping and  
damage to the wiring. If wiring passes through a hole in metal, use  
a rubber grommet to prevent the wire’s insulation from being cut by  
the metal edge of the hole.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN  
SURROUNDING OBJECTS.  
Arrange wiring and cables in compliance with the manual to  
prevent obstructions when driving. Cables or wiring that obstruct or  
hang up on places such as the steering wheel, shift lever, brake  
pedals, etc. can be extremely hazardous.  
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR  
DUST.  
Avoid installing the unit in locations with high incidence of  
moisture or dust. Moisture or dust that penetrates into this unit may  
result in product failure.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying capacity of  
the wire and result in fire or electric shock.  
Precautions  
Be sure to disconnect the cable from the (–) battery post before  
installing your CDE-103EBT/CDE-102E/CDE-101E/  
CDE-101EM. This will reduce any chance of damage to the unit  
in case of a short-circuit.  
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.  
When drilling holes in the chassis for installation, take precautions  
so as not to contact, damage or obstruct pipes, fuel lines, tanks or  
electrical wiring. Failure to take such precautions may result in fire.  
Be sure to connect the colour coded leads according to the  
diagram. Incorrect connections may cause the unit to  
malfunction or damage to the vehicle’s electrical system.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING  
SYSTEMS TO MAKE GROUND CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or any other  
safety-related system), or tanks should NEVER be used for  
installations or ground connections. Using such parts could disable  
control of the vehicle and cause fire etc.  
When making connections to the vehicle’s electrical system, be  
aware of the factory installed components (e.g. on-board  
computer). Do not tap into these leads to provide power for this  
unit. When connecting the CDE-103EBT/CDE-102E/CDE-101E/  
CDE-101EM to the fuse box, make sure the fuse for the intended  
circuit of the CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM  
has the appropriate amperage. Failure to do so may result in  
damage to the unit and/or the vehicle. When in doubt, consult  
your Alpine dealer.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE  
REACH OF CHILDREN.  
Swallowing them may result in serious injury. If swallowed,  
The CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM uses  
female RCA-type jacks for connection to other units  
(e.g. amplifier) having RCA connectors. You may need an  
adaptor to connect other units. If so, please contact your  
authorized Alpine dealer for assistance.  
consult a physician immediately.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER  
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR  
SHIFT LEVER.  
Doing so may obstruct forward vision or hamper movement etc.  
and results in serious accident.  
Be sure to connect the speaker (–) leads to the speaker (–)  
terminal. Never connect left and right channel speaker cables to  
each other or to the vehicle body.  
IMPORTANT  
SERIAL NUMBER:  
Please record the serial number of your unit in the space provided  
below and keep it as a permanent record. The serial number or the  
engraved serial number is located on the bottom of the unit.  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
30-EN  
Reinforce the head unit with the metal mounting  
strap (not supplied). Secure the ground lead of the  
Installation  
1
unit to a clean metal spot using a screw (* ) already  
attached to the vehicle’s chassis.  
2
For the screw marked “* ”, use an appropriate screw for the chosen  
mounting location.  
Connect each input lead coming from an amplifier to  
the corresponding output lead coming from the left  
rear of the CDE-103EBT/CDE-102E/CDE-101E/  
CDE-101EM. Connect all other leads of the  
CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM  
according to details described in the  
Detachable Front  
Panel  
CONNECTlONS section.  
Caution  
When you install this unit in your car, do not remove the  
detachable front panel.  
If the detachable front panel is removed during installation, you  
might press too hard and warp the metal plate that holds it in  
place.  
3
Slide the CDE-103EBT/CDE-102E/CDE-101E/  
CDE-101EM into the dashboard until it clicks. This  
ensures that the unit is properly locked and will not  
accidentally come out from the dashboard. Install  
the detachable front panel.  
The main unit must be mounted within 35 degrees of the horizontal  
plane, back to front.  
Removal  
1. Remove the detachable front panel.  
2. Insert the bracket keys into the unit, along the guides  
on either side. The unit can now be removed from the  
mounting sleeve.  
Less than 35°  
This unit  
Bracket Keys  
(Included)  
Mounting Sleeve  
(Included)  
1
Dashboard  
3. Pull the unit out, keeping it unlocked as you do so.  
<JAPANESE CAR>  
Front Frame  
Pressure Plates*  
This unit  
* If the installed mounting sleeve is loose in the dashboard, the  
pressure plates may be bent slightly to remedy the problem.  
Screws (M5 × 8)  
(Included)  
This unit  
Ground Lead  
Remove the mounting sleeve from the main unit (see  
“Removal” on page 31).  
3
*
2
Screw  
Hex Nut (M5)  
Mounting Bracket  
2
*
Secure the ground lead of the unit to a clean metal spot using a screw  
Bolt Stud  
3
(* ) already attached to the vehicle’s chassis.  
Metal  
Mounting  
Strap  
Mounting the Microphone (CDE-103EBT  
only)  
1
*
This unit  
For the sake of safety, mount the microphone in the following location.  
Ground Lead  
Chassis  
In a stable and secure location.  
In a location that does not inhibit safely driving the vehicle.  
Mount the microphone in a location where the driver’s voice can  
easily be picked up.  
Choose a location for the microphone that can easily pick up the driver’s  
voice. Requiring the driver to move towards the microphone for  
audibility causes a distraction that could be dangerous.  
31-EN  
Connections  
To iPhone/iPod  
CDE-102E/CDE-101E/  
CDE-101EM only  
or  
To Bluetooth INTERFACE (KCE-400BT)  
(sold separately)  
Antenna  
Blue  
Blue/White  
Pink/Black  
POWER ANT  
To power antenna  
To amplifier  
REMOTE TURN-ON  
AUDIO INTERRUPT IN  
To vehicle phone  
Orange  
ILLUMINATION  
To the instrument cluster illumination  
lead  
Red  
IGNITION  
BATTERY  
Ignition Key  
Yellow  
Black  
GND  
Battery  
Grey  
Speakers  
SPEAKER  
RIGHT FRONT  
Front Right  
Grey/Black  
Violet/Black  
SPEAKER  
RIGHT REAR  
Rear Right  
Rear Left  
Violet  
Green  
SPEAKER  
LEFT REAR  
Green/Black  
White/Black  
SPEAKER  
LEFT FRONT  
Front Left  
White  
Speakers  
Front Left  
CDE-103EBT/CDE-102E only  
Amplifier  
Amplifier  
Front Right  
CDE-103EBT/  
CDE-102E: Rear  
1
or Subwoofers  
*
CDE-101E/  
CDE-101EM:  
Front or  
2
Subwoofers*  
CDE-103EBT/CDE-102E only  
1
2
*
*
When Subwoofer is OFF: Output is for Rear speakers. When Subwoofer is ON: Output is for Subwoofer.  
When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.  
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 16.  
32-EN  
Antenna Receptacle  
Left Rear (+) Speaker Output Lead (Green)  
Left Rear (–) Speaker Output Lead (Green/Black)  
Left Front (–) Speaker Output Lead (White/Black)  
Left Front (+) Speaker Output Lead (White)  
Fuse Holder (10A)  
Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power antenna,  
if applicable.  
This lead should be used only for controlling the vehicle’s power  
antenna. Do not use this lead to turn on an amplifier or a signal  
processor, etc.  
Front Output RCA Connectors (CDE-103EBT/  
CDE-102E only)  
RED is right and WHITE is left.  
Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
Rear/Subwoofer Output RCA Connectors  
(CDE-103EBT/CDE-102E only)  
Audio Interrupt In Lead (Pink/Black)  
Connect this lead to the Audio interface output of a cellular  
phone which provides ground shorting when a call is  
received.  
Front/Subwoofer Output RCA Connectors  
(CDE-101E/CDE-101EM only)  
RED is right and WHITE is left.  
MIC Input Connector (CDE-103EBT only)  
To Microphone.  
Illumination Lead (Orange)  
This lead may be connected to the vehicle’s instrument  
cluster illumination lead. This will allow the backlighting of  
this unit to dim whenever the vehicle’s lights are turned on.  
RCA Extension Cable (sold separately)  
Full Speed Connector  
Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle’s fuse  
box or another unused power source which provides (+)12V  
only when the ignition is turned on or in the accessory  
position.  
Control iPhone/iPod signals.  
Connect this to an iPhone/iPod by using FULL SPEED™  
Connection Cable (KCE-433iV) (sold separately) or to an  
external device (such as a portable player) by using  
conversion cable (KCE-237B) for building up the AUX IN  
(sold separately).  
Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the vehicle’s  
battery.  
Refer to “Setting the AUX+ SETUP Mode” (page 17).  
AUX+ ON :  
When the external device is connected.  
Ground Lead (Black)  
AUX+ OFF : When an iPhone/iPod is connected.  
Connect this lead to a good chassis ground on the vehicle.  
Make sure the connection is made to bare metal and is  
securely fastened using the sheet metal screw provided.  
You can also connect this to an optional Bluetooth  
INTERFACE (KCE-400BT) (CDE-102E/CDE-101E/CDE-  
101EM only). To use a hands-free mobile phone, an optional  
Bluetooth INTERFACE (KCE-400BT) connection is required.  
For details on connection, refer to the Owner’s Manual of the  
Bluetooth INTERFACE (KCE-400BT).  
FULL SPEEDTM Connection Cable (KCE-433iV) (sold  
separately)  
Power Supply Connector  
Right Front (+) Speaker Output Lead (Grey)  
Right Front (–) Speaker Output Lead (Grey/Black)  
Right Rear (–) Speaker Output Lead (Violet/Black)  
Right Rear (+) Speaker Output Lead (Violet)  
KCE-400BT Connection Cable (Included with  
KCE-400BT)  
Front AUX Input Terminal (CDE-103EBT/CDE-102E  
only)  
This terminal allows for input of audio from an external  
device (such as a portable player), using a commercially-  
available converter cable.  
USB Connection Terminal  
Connect USB memory (sold separately)  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10 cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise  
suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
33-EN  

Bushnell Binoculars 13 7500 User Manual
Canon UC V30 User Manual
Cuisinart PowerEdge CBT 700 User Manual
Eclipse Fujitsu Ten Car Video System CD3000 User Manual
Eclipse Fujitsu Ten CD2000 User Manual
Hitachi FRANAIS DZ MV380A User Manual
Jelly Belly Dual Ice Shaver User Manual
Jensen Tools CDH900 User Manual
JVC GR AXM250 User Manual
JVC GR DVL567 User Manual