Woodstock W1690 User Manual

MODEL W1690  
DELUXE CEILING MOUNTED  
AIR CLEANER  
INSTRUCTION MANUAL  
Phone: 1-360-734-3482 • On-Line Technical Support: [email protected]  
COPYRIGHT © FEBRUARY, 2003 BY WOODSTOCK INTERNATIONAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT  
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.  
Printed in China  
TABLE OF CONTENTS  
PAGE  
INTRODUCTION ....................................................................................2  
About Your New Deluxe Ceiling Mounted Air Cleaner ........................................2  
Woodstock Service and Support....................................................................2  
Warranty and Returns................................................................................3  
Specifications ................................................................................3  
SAFETY..............................................................................................4  
Standard Safety Instructions ....................................................................4-5  
Additional Safety Instructions for Air Cleaners ................................................6  
ELECTRICAL ........................................................................................7  
110V Operation........................................................................................7  
Extension Cords........................................................................................7  
Grounding ..............................................................................................7  
INSTALLATION ....................................................................................8  
Unpacking ..............................................................................................8  
Box Contents ..........................................................................................8  
Shop Preparation ......................................................................................9  
Dust System ............................................................................................9  
Beginning ..............................................................................................10  
Table-Top Mount ....................................................................................10  
Hanging Mount........................................................................................11  
Flush Mount ..........................................................................................12  
OPERATION ......................................................................................13  
Overview ..............................................................................................13  
Control Panel ........................................................................................13  
Remote Control ......................................................................................13  
Troubleshooting......................................................................................14  
MAINTENANCE....................................................................................15  
Filters ..................................................................................................15  
CLOSURE ..........................................................................................16  
Parts Breakdown and Parts List ..............................................................17-18  
USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!  
-1-  
INTRODUCTION  
About Your New Deluxe Ceiling  
Mounted Air Cleaner  
Your new SHOP FOX® Model W1690 Deluxe Ceiling Mounted Air Cleaner has been specially designed to  
provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid  
quality control program assure safe and reliable operation.  
When used in conjunction with a dust collector system, the W1690 Deluxe Ceiling Mounted Air Cleaner  
efficiently removes fine wood particles in the air that many dust collectors cannot. Your unit has key  
features like a 5-micron outer filter, a washable 1-micron inner filter, three fan speeds, 110V operation,  
remote control functions, and a compact design. For further features and details, refer to the  
Specifications section on Page 3.  
Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our  
intent to include all the information necessary for safety, ease of assembly, practical use and durability  
of this product.  
If you need the latest edition of this manual, you can download it from http://www.shopfox.biz.  
If you still have questions after reading the latest manual, or if you have comments please contact us at:  
Woodstock International, Inc.  
Attn: Technical Support Department  
P.O. Box 2309  
Bellingham, WA 98227  
Woodstock Service and Support  
We stand behind our machines! In the event that a defect is found, parts are missing or questions arise  
about your machine, please contact Woodstock International Service and Support at 1-360-734-3482 or  
send e-mail to: [email protected]. Our knowledgeable staff will help you troubleshoot problems,  
order parts or arrange warranty returns.  
-2-  
Warranty and Returns  
Woodstock International, Inc. warrants all SHOP FOX® machinery to be free of defects from  
workmanship and materials for a period of 2 years from the date of original purchase by the original  
owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence  
or accidents, lack of maintenance, or to repairs or alterations made or specifically authorized by anyone  
other than Woodstock International, Inc.  
Woodstock International, Inc. will repair or replace, at its expense and at its option, the SHOP FOX®  
machine or machine part which in normal use has proven to be defective, provided that the original  
owner returns the product prepaid to the SHOP FOX® factory service center or authorized repair  
facility designated by our Bellingham, WA office, with proof of their purchase of the product within 2  
years, and provides Woodstock International, Inc. reasonable opportunity to verify the alleged defect  
through inspection. If it is determined there is no defect, or that the defect resulted from causes not  
within the scope of Woodstock International Inc.'s warranty, then the original owner must bear the cost  
of storing and returning the product.  
This is Woodstock International, Inc.'s sole written warranty and any and all warranties that may be  
implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited  
to the duration of this written warranty. We do not warrant that SHOP FOX® machinery complies with  
the provisions of any law or acts. In no event shall Woodstock International, Inc.'s liability under this  
warranty exceed the purchase price paid for the product, and any legal actions brought against  
Woodstock International, Inc. shall be tried in the State of Washington, County of Whatcom. We shall in  
no event be liable for death, injuries to persons or property or for incidental, contingent, special or  
consequential damages arising from the use of our products.  
Every effort has been made to ensure that all SHOP FOX® machinery meets high quality and durability  
standards. We reserve the right to change specifications at any time because of our commitment to  
continuously improve the quality of our products.  
Specifications  
Motor ..............................................15 HP, 115V, 60 Hz, 1200 RPM, Single-Phase  
Motor Amperage..................................HI = 3 Amps, MID = 212 Amps, LO = 2 Amps  
Motor Low Speed ..........................................................................750 RPM  
Motor Medium Speed ......................................................................960 RPM  
Motor High Speed ........................................................................1200 RPM  
Fan Low Speed Sound Rating ................................................................62 dB  
Fan Medium Speed Sound Rating............................................................67 dB  
Fan High Speed Sound Rating................................................................69 dB  
Air Flow at Low Speed ....................................................................556 CFM  
Air Flow at Medium Speed................................................................702 CFM  
Air Flow at High Speed ..................................................................1044 CFM  
Primary Filter ..............................................................................5-Micron  
Secondary Filter............................................................................1-Micron  
Unit Dimensions (L x W x H) ............................................3014" x 2418" x 1218  
"
Shipping Weight ..............................................................................64 lbs.  
Installed Weight..............................................................................55 lbs.  
-3-  
SAFETY  
READ MANUAL BEFORE OPERATING MACHINE.  
FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL  
RESULT IN PERSONAL INJURY.  
Indicates an imminently hazardous situation which, if not avoided, WILL  
result in death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, COULD  
result in death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, MAY  
result in minor or moderate injury.  
This symbol is used to alert the user to useful information about proper  
operation of the equipment, and/or a situation that may cause damage  
to the machinery.  
NOTICE  
Standard Safety Instructions  
1. Thoroughly read the instruction manual before operating your machine. Learn the applications,  
limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future  
reference.  
2. Keep work area clean and well lit. Clutter and inadequate lighting invite potential hazards.  
3. Ground all tools. If a machine is equipped with a three-prong plug, it must be plugged into a three-  
hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in  
accommodating a two-hole receptacle, ground using a screw to a known ground.  
4. Wear eye protection at all times. Use safety glasses with side shields or safety goggles that meet  
the appropriate standards of the American National Standards Institute (ANSI).  
5. Avoid dangerous environments. DO NOT operate this machine in wet or open flame environments.  
Airborne dust particles could cause an explosion and severe fire hazard.  
6. Ensure all guards are securely in place and in working condition.  
7. Make sure the machine power switch is in the OFF position before connecting power to machine.  
8. Keep the work area clean, free of clutter, grease, etc.  
9. Keep children and visitors away. Visitors should be kept at a safe distance while operating unit.  
10.Childproof your workshop with padlocks, master switches or by removing starter keys.  
11.Stop and disconnect the machine when cleaning, adjusting or servicing.  
-4-  
12.DO NOT force tool. The machine will do a safer and better job at the rate for which it was designed.  
13.Use correct tool. Do not force machine or attachment to do a job for which it was not designed.  
14.Wear proper apparel. Do not wear loose clothing, neck ties, gloves, jewelry, and secure long hair  
away from moving parts.  
15.Remove adjusting keys, rags, and tools. Before turning the machine on, make it a habit to check  
that all adjusting keys and wrenches have been removed.  
16.Avoid using an extension cord. But if you must,  
Extension Cord Requirements  
examine the extension cord to ensure it is in good  
TABLE 1  
condition. Use TABLE 1 to determine the correct  
length and gauge of extension cord needed for your  
particular needs. The amp rating of the motor can be  
found on its nameplate. If the motor is dual voltage,  
be sure to use the amp rating for the voltage you will  
be using. If you use an extension cord with an  
undersized gauge or one that is too long, excessive  
heat will be generated within the circuit, increasing  
the chance of a fire or damage to the circuit. Always  
use an extension cord that uses a ground pin and  
connected ground wire. Immediately replace a  
damaged extension cord.  
Length and Gauge  
Amp Rating  
0-6  
25ft  
#16  
#16  
#16  
#14  
#12  
#10  
50ft 100ft  
#16 #16  
#16 #14  
#16 #14  
#12 #12  
#12 #10  
7-10  
11-12  
13-16  
17-20  
21-30  
#10  
No  
17.Keep proper footing and balance at all times.  
18.DO NOT leave machine unattended. Wait until it comes to a complete stop before leaving the area.  
19.Perform machine maintenance and care. Follow lubrication and accessory attachment instructions  
in the manual.  
20.Keep machine away from open flame. Operating machines near pilot lights and/or open flames  
creates a high risk if dust is dispersed in the area. Dust particles and an ignition source may cause  
an explosion. Do not operate the machine in  
high-risk areas, including but not limited to,  
those mentioned above.  
Always wear safety glasses or goggles when  
operating equipment. Operating this  
21.If at any time you are experiencing difficulties  
equipment creates the potential for flying  
performing the intended operation, stop using  
debris that can cause eye injury. Everyday  
glasses or reading glasses only have impact  
resistant lenses, they are not safety glasses.  
Be certain the safety glasses you wear meet  
the appropriate standards of the American  
National Standards Institute (ANSI).  
the machine! Contact our service department or  
ask a qualified expert how the operation should  
be performed.  
22. Habits—good and bad—are hard to break.  
Develop good habits in your shop and safety will  
become second-nature to you.  
-5-  
Additional Safety Instructions for Air Cleaners  
Read and understand this  
entire instruction manual  
before using this machine.  
Serious personal injury  
may occur if safety and  
operational information is  
Use this and other machinery with caution  
and respect, and always consider safety  
first, as it applies to your individual working  
conditions. Remember, no list of safety  
guidelines can be complete, and every shop  
environment is different. Failure to follow  
guidelines can result in serious personal  
injury, damage to equipment and/or poor  
work results.  
MODEL W1690  
DELUXE CEILING MOUNTED  
AIR CLEANER  
INSTRUCTION MANUAL  
On-Line Technical Support: [email protected]  
not  
understood  
and  
Phone: 1-360-734-3482  
COPYRIGHT  
©
JANUARY, 2003 BY WOODSTOCK INTERNATIONAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT  
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.  
Printed in China  
followed. Do not risk your  
safety by not reading!  
ALWAYS secure any aprons, clothing, and long hair away from the intake side of the air cleaner unit  
and any moving parts.  
ALWAYS research the dangers of the specific species of wood you are working with as dust from  
some woods are toxic and can make you sick, cause cancer, and lead to long-term respiratory  
problems.  
ALWAYS use a respirator along with a dust collection system when operating woodworking  
machinery, and keep the filters of your air cleaner unit clean for optimum performance.  
ALWAYS keep your hands and tools away from the fan output screen during fan operation.  
ALWAYS turn the air cleaner OFF, let the fan and motor come to a complete stop, and unplug the  
power source before leaving, servicing, adjusting, or troubleshooting the unit.  
ALWAYS keep the filters serviced, and never attempt to replace filters or work on the machine  
while it is operating.  
ONLY operate this air cleaner unit in dry environments.  
NEVER allow this air cleaner unit to operate in an environment that has volatile fumes from fuels,  
paints, pesticides, chemicals, smoke; and never operate in an environment that has particles of  
silica, metal, asbestos, or hazardous bacterium. This air cleaner unit is only designed to remove very  
fine wood particles from the air. It is not a dust collector.  
-6-  
ELECTRICAL  
110V Operation  
Grounding  
The SHOP FOX® Model W1690 Deluxe Ceiling  
Mounted Air Cleaner uses a 110V, single-phase,  
1
5  
HP motor that draws approximately 3 amps  
Any electrical outlet and  
at the high speed setting.  
circuit that you plug your  
machine into must be  
grounded. Serious injury  
and/or fire may occur if this  
warning is ignored!  
Make sure the supply circuit, circuit breaker, or  
fuse can carry the additional 3 amp load since  
other machines may be using the same circuit. If  
the total amperage load of all machines and the  
air cleaner unit exceeds the amperage rating of  
the circuit breaker or fuse, use a different  
circuit that can carry the load.  
Ground this machine! The electrical cord  
supplied with the Model W1690 Air Cleaner has a  
ground pin. If your power receptacle does not  
have a ground pin hole, have the receptacle  
replaced by a qualified electrician, or have an  
appropriate adapter installed and grounded  
properly.  
DO NOT modify an existing low-amperage circuit  
by only replacing the circuit breaker with a  
breaker rated for a higher amperage. The  
breaker and the complete circuit must be  
replaced by a qualified electrician.  
NOTICE  
When using an electrical plug adapter, make  
sure the adapter is grounded.  
Extension Cords  
We do not recommend using an extension cord  
with most equipment because the cord can  
generate heat that may cause fire or circuit  
damage. If you must use an extension cord, use  
the guidelines below.  
NEVER cut the ground pin off so your air cleaner  
unit will plug into a non-grounded receptacle.  
See Figure 1. Remember, an adapter with a  
grounding wire does not guarantee the air  
cleaner unit is grounded. A ground source must  
always be verified in the electrical circuit within  
the wall or conduit.  
•Use a cord rated for Standard Service  
(Grade S)  
•Use a cord that is 100 feet or less only  
•Use a cord with a ground pin  
•Use an undamaged cord only  
Figure 1. NEVER cut the ground pin off so the  
plug can fit into a non-grounded receptacle.  
-7-  
INSTALLATION  
Unpacking  
3
1
Get lifting assistance to  
2
remove the unit from the  
box. At 55 pounds, the  
Model W1690 Air Cleaner  
is a heavy load.  
The Model W1690 Deluxe Ceiling Mounted Air  
Cleaner is carefully packed. However, if it is  
damaged or is missing any parts, please contact  
Woodstock International Service and Support at 1-  
360-734-3482 or send e-mail to:  
Figure 2. Model W1690 Deluxe Ceiling  
Mounted Air Cleaner and filters.  
No assembly is required for the Model W1690  
Deluxe Ceiling Mounted Air Cleaner; however, you  
should remove the filters and remove any packing  
material that may be inside of the unit.  
10  
5
Hardware has been included for various air  
cleaner mounting applications.  
6
Box Contents  
Layout and inventory the shipped parts to  
familiarize yourself with your Model W1690  
Deluxe Ceiling Mounted Air Cleaner. See  
Figures 2 and 3. This will help with the  
installation process.  
9
4
7
8
Figure 3. Remote control and mounting  
Item  
Qty.  
hardware.  
1. W1690 Deluxe Ceiling Mounted Air Cleaner  
2. Primary Filter (5-Micron, Pleated-Type)  
3. Secondary Filter (1-Micron, Bag-Type)  
4. Hand-Held Remote Control Unit  
5. AAA Battery  
1
1
1
1
2
4
8
8
4
4
6. Flange Bracket  
7. Hex Bolt (M6-1.0 X 8)  
8. Flat Washer (6 mm)  
9. Eye Bolt (M6-1.0 x 20)  
10. Rubber Foot  
-8-  
Shop Preparation  
Working Clearances: Consider your current  
and future shop needs with respect to the  
machinery and the dust collection system  
used. Make sure that the inlet and the outlet  
have at least 12" of clearance between  
obstructions as not to restrict the air flow.  
The suction must be farther than 3 feet from  
vents as the filter, if to close to vents, may  
draw and filter air that is not from your work  
area. You may have to create or modify other  
shop ducting to achieve the correct working  
clearances and airflow.  
DO NOT operate this air  
cleaner unit at a location  
where flammable fuels,  
solvents, or other volatile  
chemicals may exist. Since  
these products have a low  
flash point, the fan motor  
can ignite the fumes and  
cause an explosion and  
severe personal injury!  
Outlets: Make sure the electrical circuits have  
the capacity to handle the amperage  
requirements of the new air cleaner unit.  
Refer to Page 7 for more information.  
Electrical outlets should be located near the  
unit so power or extension cords are clear of  
high-traffic areas.  
DO NOT allow untrained  
people in your shop! Make  
sure shop entrances are  
locked and machines are  
correctly turned off with  
lock-out devices when  
not in use.  
Otherwise,  
injury or death can occur.  
Dust System  
When used in conjunction with a dust collector  
system, the Model W1690 Deluxe Ceiling  
Mounted Air Cleaner efficiently removes most  
fine wood particles in the air that many dust  
collectors cannot.  
Machine Mobility: This air cleaner unit has a  
balanced fan and uses digital components.  
Move this air cleaner unit with care, and do  
not drop or handle it roughly.  
Operating Location: Operating this air  
cleaner unit in the incorrect environment can  
cause an explosion or respiratory damage to  
you and others. This air cleaner unit is only  
designed to help remove very fine wood  
particles from the air. It is not a dust  
collector, so take all necessary safety  
precautions. The operating location must be  
free of volatile fumes from fuels, paints,  
pesticides, chemicals, smoke, and other  
gasses; including an environment free of  
silica, metal, asbestos, hazardous bacterium,  
and other particles.  
USE the correct dust  
collection system in your  
shop. This air cleaner unit is  
not a dust collection system  
and CANNOT be modified as  
such. Ignoring this warning  
can result in short and long-  
term respiratory illness.  
For additional information on the correct dust  
collection system, additions, or modifications;  
contact your Woodstock International dealer for  
a copy of the Dust Collection Basics handbook  
and available accessories.  
Locate the air cleaner unit where the signal  
path for the remote control is unobstructed  
and is used within 75 feet of the control  
panel. Often, the optimum location for this  
air cleaner unit is at an overhead central shop  
location and not at the corners.  
-9-  
Beginning  
You can install the air cleaner unit three ways.  
See Figures 4 and 5.  
Hanging Mount  
Eye Bolt  
Table-Top Mount, use the rubber feet  
and/or the flush mount flange brackets for  
a table-top application. Refer to Page 10.  
Flush Mount  
Flange Bracket  
Hanging Mount, use the eye bolts for a high  
ceiling application. Refer to Page 11.  
Table-Top  
Mount  
Rubber  
Foot  
Flush Mount, use the flange brackets for a wall  
or low ceiling application. Refer to Page 12.  
Figure 4. Air cleaner unit mounting options.  
Keep the air cleaner unit  
unplugged during all  
installation procedures.  
Ignoring this warning may  
result in serious personal  
injury to you or others!  
Table-Top  
Hanging Mount  
Mount  
Eye Bolt  
Rubber  
Foot  
Table-Top Mount  
You can use the air cleaner unit as a portable air  
filtration system by installing the rubber feet  
and placing the unit on a workbench or a table.  
Flush Mount  
Flange Bracket  
Figure 5. Air cleaner unit mounting hardware.  
Get lifting assistance  
before installation. At 55  
pounds, the Model W1690  
air cleaner is a heavy load.  
Rubber  
Foot  
To set up the air cleaner for table-top  
operation, do these steps:  
Flush Mount  
Flange Bracket  
Mounting Holes  
1. With the help of an assistant, carefully invert  
the air cleaner unit.  
2. Expose the sticky backing on the foot, and  
affix the rubber foot to the bottom of the air  
cleaner unit. See Figure 6.  
3. Repeat Step 2 for remaining feet.  
Figure 6. Rubber feet correctly installed  
(Underside View).  
For permanent table-top mounting, refer to  
the Flush Mount procedure on Page 12, and  
install the air cleaner unit to the tabletop  
with the flush mount flange brackets.  
-10-  
Hanging Mount  
To make the unit operate at the optimum height  
of 7 feet from the floor, you can install the air  
filter unit in your shop by hanging it by chain,  
cable, or steel strapping.  
Plug Screw  
Get lifting assistance  
before installation. At 55  
pounds, the Model W1690  
air cleaner is a heavy load.  
Figure 7. Plug screw.  
ONLY hang the air cleaner to load bearing  
ceiling supports or joists that can hold at least  
100 lbs. DO NOT mount the unit to sheet rock,  
pressboard, paneling, or honeycomb ceiling  
panels with expansion-type fasteners like the  
ones shown in Figure 10. The fasteners can tear  
out and the air cleaner can fall. Ignoring this  
warning can result in severe injury or death.  
To install the air cleaner for hanging mount  
operation, do these steps:  
1. Install four chain, cable, or steel strapping  
lines to your ceiling from capable ceiling  
studs or supports. When the lines hang down  
freely they should be 1514" from left-to-right  
and 2412" from front-to-rear.  
Figure 8. Eye bolt correctly seated.  
2. Remove the plug screw. Retain the screws  
because if you remove the eye bolts for the  
flush mounting configuration, you must  
reinstall these screws to seal the air cleaner  
unit. See Figure 7.  
3. Thread the eye bolt completely into the air  
filter unit until the jam-nut shoulder contacts  
the air filter unit. See Figure 8.  
4. Tighten the eye bolt until it is snug against  
the air filter unit.  
5. Repeat Steps 2 through 5 on the three  
remaining eye bolts.  
6. Raise and secure the air cleaner eye bolts to  
the four hanging lines.  
-11-  
Flush Mount  
You can install the air filter unit in a confined  
shop by mounting it flush to a ceiling, wall, or  
table using the flange mounts.  
ONLY mount the air cleaner unit to load bearing  
supports, wall studs, or table that can hold at  
least 100 lbs. DO NOT mount the unit to sheet  
rock walls, pressboard, paneling, or honeycomb  
wall panels with expansion-type fasteners like  
the ones shown in Figure 10. The fasteners can  
tear out and the air cleaner can fall. Ignoring this  
warning can result in severe injury or death.  
Figure 9. Typical unacceptable fasteners.  
Get lifting assistance  
before installation. At 55  
pounds, the Model W1690  
air cleaner is a heavy load.  
Lip  
Mounting  
holes  
To install the air cleaner for flush mount  
operation, do these steps:  
1. Locate the applicable load bearing studs or  
supports in the wall or ceiling, and mark the  
air cleaner unit bolt pattern on the wall or  
ceiling (1714" from left-to-right and 31" from  
front-to-rear).  
Figure 10. Flange bracket mounting holes and lip.  
1
2. Drill the bolt pattern to accept at least 4  
"
1
Flange bracket  
shank lag bolts for studs, or use 4" nuts,  
bolts, and washers for mounting to supports.  
mounted under lip  
3. Position the flange bracket under the air  
cleaner unit lip at the mounting hole location.  
See Figure 10. For permanent table top  
mounting, use the lower-lip holes.  
4. Install the flat washers and the hex bolts to  
secure the flange brackets to the unit. See  
Figure 11.  
5. Repeat Steps 3 and 4 for the other three  
Figure 11. Flange correctly installed under lip.  
flange brackets.  
6. With the help of an assistant, position the air  
cleaner on the wall or ceiling, and screw or  
bolt the unit in place.  
-12-  
OPERATION  
Overview  
Control Panel  
When the Model W1690 Deluxe Ceiling Mounted  
Air Cleaner is turned on, the fan motor starts on  
HI and then switches to the speed of your  
selection. Air is drawn through the primary  
filter, through the secondary filter, then the  
cleaned air is distributed into your shop.  
The control panel enables you to manually turn the  
air cleaner ON and OFF, and set the fan speed.  
The panel has a remote control unit signal  
receiver, a 5-ampere fuse for circuit protection,  
and a series of LED lights that indicate your speed  
and auto shut-off selections. See Figure 12.  
NOTICE  
ALWAYS take a few moments to listen and  
observe for unusual noise and vibration after  
starting the air cleaner.  
To operate the air cleaner unit, use the listed  
controls:  
OFF: Allows you to manually turn the air  
cleaner OFF.  
ON / SPEED: Allows you to turn the unit ON  
with the first push of the button, and for  
every additional push, the fan speed is  
cycled from LO, MID, and HI. Speed  
selection is indicated by a red LED light.  
Figure 12. Control Panel.  
Remote Control  
The remote control unit enables you to remotely  
turn the air cleaner ON and OFF, set the fan  
speed, and set the auto shut-off time. The remote  
control unit uses two AAA alkaline batteries as a  
power source. The remote control unit must be  
within 75 feet and have an unobstructed infrared  
signal path to the control panel in order to control  
the air filter. See Figure 13.  
To operate the remote control unit, use the  
listed controls:  
OFF: Allows you to remotely shut the air  
cleaner off.  
ON / SPEED: Allows you to remotely turn the  
unit ON with the first push of the button,  
and for every additional push, the fan speed  
is cycled from LO, MID, and HI.  
TIME: Allows you to set the auto shut-off  
time from no auto shut-off, to auto shut-off  
in 1 hour, 2 hours, and 4 hours.  
Figure 13. Remote Control.  
-13-  
Troubleshooting  
Use this troubleshooting chart to solve any common problems with your Model W1690 Air Cleaner.  
SYMPTOM  
POSSIBLE REASON  
HOW TO REMEDY  
The air  
cleaner  
does not  
operate at  
all.  
The power supply circuit breaker is tripped.  
Correct the cause for high current draw and  
close the circuit breaker.  
No power to the control panel.  
Wiring is at fault.  
Replace the blown fuse in the control panel.  
Repair, replace wires, plugs and cables as  
applicable; and make sure all electrical plugs  
and connections are secure.  
The control panel circuit board is at fault.  
The motor is at fault.  
Replace the circuit board.  
Replace the motor.  
The remote The remote control has no power.  
Install or replace the batteries.  
control does  
not operate The signal path is obstructed.  
the air  
cleaner but  
Make sure the signal path is clear to the  
infrared remote control sensor on the control  
panel.  
the control  
panel  
operates  
fine.  
The remote control is at fault.  
Replace the hand-held remote control unit.  
Replace the control panel circuit board.  
The control panel circuit board is at fault.  
The filters are wet or clogged.  
The air  
Replace the primary filter and clean the  
secondary filter.  
cleaner CFM  
output is  
reduced.  
The airflow path is obstructed.  
Remove obstructions or add ducting.  
Replace the control panel circuit board.  
Replace the motor.  
The control panel circuit board is at fault.  
The motor is at fault.  
The mounting is loose.  
The air  
filter unit is  
noisy or  
Tighten the flange brackets and reinstall the  
air cleaner unit.  
vibrates.  
The unit is not level.  
Level the air cleaner unit.  
The fan or motor is loose.  
Unplug the unit, remove the filters, and  
tighten all loose fasteners.  
-14-  
MAINTENANCE  
Filters  
The amount of use has a direct bearing on when  
you must change the primary air filter and service  
the secondary air filter. Contact your SHOP  
FOX® dealer for other possible filter types  
available.  
Filter Retainer Latch  
Keep the air cleaner unit  
unplugged during all  
maintenance procedures.  
Ignoring this warning may  
result in serious personal  
injury to you or others!  
Figure 14. 5-Micron primary filter.  
Always wear a dust mask  
and safety glasses when  
servicing and changing  
filters. Sawdust may  
cause allergic reactions  
or respiratory problems.  
To change and service the filters, do these steps:  
1. Unplug the air cleaner unit.  
2. Move the filter retainer latch upward, remove  
Figure 15. 1-Micron secondary filter.  
the primary filter and discard it. See Figure 14.  
NOTICE  
DO NOT use compressed air to blow out the  
secondary filter. If you do, you will damage  
the filter and reduce filtering quality.  
3. Remove the secondary filter and shake out the  
wood dust until clean and/or wash out with warm  
water and let dry. See Figure 15.  
4. Vacuum out the inside of the air cleaner housing.  
See Figure 16.  
5. Reinstall the secondary filter when it is dry and  
Figure 16. Air cleaner housing.  
install a new primary filter.  
6. Move the filter retainer latch downward to  
lock all the filters in place.  
-15-  
CLOSURE  
The following pages contain parts diagrams/lists  
We recommend you keep this manual for  
complete information regarding Woodstock  
International, Inc.’s warranty and return policy.  
Should a problem arise, we recommend that you  
keep your proof of purchase with your manual.  
If you need additional technical information  
relating to this machine, or if you need general  
assistance or replacement parts, please contact  
the Service Department at 1-360-734-3482 or  
e-mail: [email protected].  
and a warranty card for your SHOP FOX® Model  
W1690.  
If you need parts or help in assembling your  
machine, or if you need more operational  
information, we encourage you to call our  
Service Department. Our trained service  
technicians will be glad to help you.  
If you have comments dealing specifically with  
this manual, please write to us using the address  
in the General Information. The specifications,  
drawings, and photographs illustrated in this  
manual represent the Model W1690 as supplied  
when the manual was prepared. However, due  
to Woodstock International, Inc.’s policy of  
continuous improvement, changes may be made  
at any time with no obligation on the part of  
Woodstock International, Inc. Whenever  
possible, though, we send manual updates to all  
owners of a particular tool or machine that have  
registered their purchase with our warranty  
card. Should you receive one, add the new  
information to this manual and keep it for  
reference.  
Additional information sources are necessary to  
realize the full potential of this machine. Trade  
journals, woodworking magazines, and your  
local library are good places to start.  
The Model W1690 is specifically designed for air  
filtering operation. DO NOT MODIFY AND/OR  
USE THIS MACHINE FOR ANY OTHER PURPOSE.  
MODIFICATIONS OR IMPROPER USE OF THIS  
TOOL WILL VOID THE WARRANTY. If you are  
confused about any aspect of this machine, DO  
NOT use it until all your questions have been  
answered.  
We have included some important safety  
measures that are essential to the operation of  
the machine. While most safety measures are  
generally universal, we remind you that each  
workshop is different and safety rules should be  
considered as they apply to your specific  
situation.  
Operating this equipment has the potential  
for flying debris to cause eye injury. Always  
wear safety glasses or goggles when  
operating equipment. Everyday glasses or  
reading glasses only have impact resistant  
lenses, they are not safety glasses. Be  
certain the safety glasses you wear meet  
the appropriate standards of the American  
National Standards Institute (ANSI).  
-16-  
-17-  
REF  
PART #  
DESCRIPTION  
REF  
PART #  
DESCRIPTION  
33 X1690033  
34 X1690034  
35 X1690035  
36 X1690036  
37 X1690037  
38 XPLN02M  
39 X1690039  
40 X1690040  
41 X1690041  
42 XPW03M  
43 XPB29M  
45 X1690045  
46 XPW03M  
47 XPB04M  
48 X1690048  
49 XPK48M  
50 XPB06M  
51 X1690051  
52 X1690052  
53 X1690053  
54 X1690054  
55 XPLW03M  
56 XPS11M  
CLIP SET  
1
2
3
4
5
6
7
8
9
X1690001  
X1690002  
X1690003  
X1690004  
X1690005  
X1690006  
X1690007  
X1690008  
X1690009  
REMOTE CONTROL  
LABEL (CONTROLS)  
CAPACITOR  
INSULATOR  
CAPACITOR CLAMP  
MOTOR  
HEX LOCKING NUT M5-0.8  
FLANGE  
SPACER  
REMOTE CONTROL COVER  
AAA ALKALINE BATTERY  
FUSE HOLDER  
1
8"  
1
FUSE 5-AMP (250VAC)  
POWER CORD 3-WIRE 18-GA  
STRAIN RELIEF  
CONTROL PANEL  
PHLP HD SCR M4-0.7 X 10  
LABEL (CONTROLS)  
PC BOARD  
PHLP HD SCR M3-0.45 X 6.5  
SPACER (SPECIAL)  
PHLP HD SCR (SPECIAL)  
SLEEVE  
FLAT WASHER 6MM  
HEX BOLT M6-1.0 X 30  
FLANGE BRACKET  
FLAT WASHER 6MM  
HEX BOLT M6-1.0 X 10  
FAN  
KEY 4 X 4 X 20MM  
HEX BOLT M8-1.25 X12  
FLANGE DISK 6.5 X 44MM  
CAP SCREW M6-1.0 X 20 (LH)  
FAN HOUSING  
TAPPING SCREW  
LOCK WASHER 6MM  
PHLP HD SCR M6-1.0 X 16  
FLAT WASHER 6MM  
LABEL (DUST MASK)  
LABEL (EXPLODE)  
LABEL (SHOP FOX)  
LABEL (HANDS AWAY)  
HOUSING  
10 XPS38M  
11 X1690011  
12 X1690012  
13 XPS53M  
14 X1690014  
15 X1690015  
16 XPTLW04M EXT TOOTH WSHR 4MM  
17 XPN30M  
18 XPW05M  
19 XPLW02M  
20 XPS54M  
21 X1690021  
22 X1690022  
23 X1690023  
24 X1690024  
25 X1690025  
26 X1690026  
27 X1690027  
28 X1690028  
29 X1690029  
30 X1690030  
HEX NUT M4-0.75  
FLAT WASHER 4MM  
LOCK WASHER 4MM  
PHLP HD SCR M4-0.75 X 6  
PC WIRING HARNESS  
BOLT (SPECIAL) M3-0.45 X 6.5  
EYE BOLT M6-1.0 X 20  
RUBBER BUSHING  
LARGE LABEL (ELECTRICAL)  
RIVET NUT M6 X 8  
SMALL LABEL (ELECTRICAL)  
RUBBER FOOT  
HANDLE  
57 XPW03M  
58 X1690058  
59 X1690059  
60 X1690060  
61 X1690061  
62 X1690062  
63 X1690063  
LABEL (UNPLUG POWER)  
LABEL (MACHINE DATA)  
MOUNT AND BOLT BAG  
PRIMARY FILTER 5-MICRON  
FOAM SEAL 14" X 1" X 70"  
SECONDARY FILTER 1-MICRON  
64 X1690064  
65 X1690065  
31 X1690031  
32 X1690032  
-18-  
FOLD ALONG DOTTED LINE  
Place  
Stamp  
Here  
WOODSTOCK INTERNATIONAL, INC.  
P.O. BOX 2309  
BELLINGHAM, WA 98227-2309  
FOLD ALONG DOTTED LINE  
TAPE ALONG EDGES--PLEASE DO NOT STAPLE  
WARRANTY CARD  
Name __________________________________________________________________________________________  
Street __________________________________________________________________________________________  
City ____________________________________________________________________State________Zip_________  
Phone Number_______________________E-Mail_________________________________FAX___________________  
MODEL # _____________ Serial #_____________ Purchase Date _____________ Time in Use _______________  
The following information is given on a voluntary basis and is strictly confidential.  
1.  
2.  
Where did you purchase your SHOP FOX® machine?  
10.  
What stationary woodworking tools do you own? Check all that apply.  
_________________________________________________________  
___Air Compressor  
___Band Saw  
___Panel Saw  
___Planer  
How did you first learn about us?  
___Drill Press  
___Power Feeder  
___Radial Arm Saw  
___Shaper  
___Spindle Sander  
___Table Saw  
___Drum Sander  
___Dust Collector  
___Horizontal Boring Machine  
___Jointer  
___Advertisement  
___Friend  
___Mail order Catalog  
___World Wide Web Site  
___Local Store  
___Lathe  
___Mortiser  
___Vacuum Veneer Press  
___Wide Belt Sander  
___Other__________________________________________________  
Which of the following magazines do you subscribe to.  
___Other__________________________________________________  
3.  
11.  
12.  
13.  
Which benchtop tools do you own? Check all that apply.  
___American Woodworker  
___Cabinetmaker  
___Today’s Homeowner  
___Wood  
___1" x 42" Belt Sander  
___5" - 8" Drill Press  
___8" Table Saw  
___8" - 10" Bandsaw  
___Disc/Belt Sander  
___Mini Jointer  
___6" - 8" Grinder  
___Mini Lathe  
___10" - 12" Thickness Planer  
___Scroll Saw  
___Spindle/Belt Sander  
___Family Handyman  
___Fine Homebuilding  
___Fine Woodworking  
___Home Handyman  
___Wooden Boat  
___Woodshop News  
___Woodsmith  
___Woodwork  
___Journal of Light Construction  
___Old House Journal  
___Popular Mechanics  
___Popular Science  
___Woodworker  
___Woodworker’s Journal  
___Workbench  
___Other__________________________________________________  
___American How-To  
Which portable/hand held power tools do you own? Check all that apply.  
___Popular Woodworking  
___Other__________________________________________________  
Which of the following woodworking/remodeling shows do you watch?  
___Belt Sander  
___Biscuit Joiner  
___Circular Saw  
___Detail Sander  
___Drill/Driver  
___Miter Saw  
___Orbital Sander  
___Palm Sander  
___Portable Planer  
___Saber Saw  
___Reciprocating Saw  
___Router  
4.  
5.  
6.  
___Backyard America  
___Home Time  
___The New Yankee Workshop  
___This Old House  
___The American Woodworker  
___Woodwright’s Shop  
___Other__________________________________________________  
___Other__________________________________________________  
What is your annual household income?  
What machines/supplies would you like to see?  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
_________________________________________________________  
___$20,000-$29,999  
___$30,000-$39,999  
___$40,000-$49,999  
___$50,000-$59,999  
___$60,000-$69,999  
___$70,000-$79,999  
___$80,000-$89,999  
___$90,000 +  
14.  
15.  
16.  
What new accessories would you like Woodstock International to carry?  
_________________________________________________________  
_________________________________________________________  
What is your age group?  
Do you think your purchase represents good value?  
___20-29  
___30-39  
___40-49  
___50-59  
___60-69  
___70 +  
___Yes  
Would you recommend SHOP FOX® products to a friend?  
___Yes ___No  
___No  
7.  
8.  
9.  
How long have you been a woodworker?  
___0 - 2 Years  
___2 - 8 Years  
___8 - 20 Years  
___20+ Years  
17.  
Comments:________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
__________________________________________________________  
How would you rank your woodworking skills?  
___Simple  
___Advanced  
___Master Craftsman  
___Intermediate  
How many SHOP FOX® machines do you own? _____________  

Zebra Technologies 11280100200 User Manual
York Air Conditioner 10 User Manual
Xerox Phaser 3160 User Manual
Sennheiser Studio Microphone Md 211 User Manual
Sanyo Ml2016 User Manual
Samsung Ad18b1c09 User Manual
JVC DLA NZ7BE User Manual
ASUS UX301L User Manual
ACER E131D User Manual
ACER DWX1608 User Manual