Uniden Baby Monitor G403 User Manual

Lullaboo G403 Baby Monitor  
User’s Guide  
Contents  
Customer Care .............................................................................................2  
Camera On............................................................................................. 21  
Recorder Setup Screen...................................................................... 22  
Network Setup Screen....................................................................... 26  
Alarm Setup Screen............................................................................ 29  
IntroDuCtIon ..........................................................................4  
FEATURES ......................................................................................................4  
GettInG starteD......................................................................5  
Using This Manual ......................................................................................5  
What’s Included...........................................................................................5  
System Setup Screen.............................................................................. 31  
System Upgrade.................................................................................. 36  
Language ............................................................................................... 36  
Quick Tips ................................................................................................... 37  
Getting to Know the MOnitor and Camera.......................................6  
What the lights mean ...........................................................................7  
remote aCCess...................................................................... 38  
Setting Up the Equipment ......................................................................7  
Set Up the Monitor ................................................................................7  
Mount the Camera Stand....................................................................8  
Attach the Camera.................................................................................9  
Connect to Power ..................................................................................9  
Setting Up Your System ...........................................................................9  
Camera Settings .....................................................................................9  
System Settings ......................................................................................9  
Recording Settings ............................................................................. 10  
Overview..................................................................................................... 38  
System Requirements........................................................................ 38  
Connecting to the Internet.............................................................. 38  
Connecting to the Intranet (Home network)............................ 39  
Downloading and Using the Apps.................................................... 39  
Android....................................................................................................39  
iPhone® ................................................................................................... 42  
soLVInG ProBLems ............................................................... 44  
aDDItIonaL InFormatIon .................................................. 46  
Product Specifications........................................................................... 46  
unIDen GuarDIan LuLLaBoo FIrmWare oPeratIon  
oVerVIeW ............................................................................ 11  
Live Screen................................................................................................. 11  
What the icons Mean......................................................................... 12  
Changing How the Live Screen Displays.................................... 14  
Using the PentaZoom™ Feature.................................................... 14  
Using Your System .................................................................................. 15  
Recording Live Video......................................................................... 15  
Playing Back Recorded Video ......................................................... 15  
Adding New Cameras........................................................................ 16  
Lithium-Polymer Battery Warning......................................... 47  
recycling and Disposal Information...................................... 47  
FCC Compliance Information ................................................. 48  
Part 15 Compliance Statement...................................................... 48  
RF Exposure Information.................................................................. 48  
IC Compliance Information..................................................... 49  
Radio Equipment Notice .................................................................. 49  
GuarDIan LuLLaBoo sCreen DesCrIPtIon...................... 18  
Overview..................................................................................................... 18  
Guardian Lullaboo Settings Screen................................................... 18  
Ce Compliance Information.................................................... 49  
three-Year Limited Warranty................................................. 49  
Camera Setup Screen............................................................................. 20  
Pairing ..................................................................................................... 20  
Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden  
expects consumer’s use of these products to be in compliance with all local, state and federal law. For further information  
on video surveillance and audio recording legal requirements, please consult your local, state and federal law.  
© 2013. All rights allowed by law are hereby reserved.  
IntroDuCtIon  
Features  
2.4GHz Digital FHSS  
4.3” high-resolution touchscreen LCD  
Easy to use graphic interface  
Secure, interference-free video  
Up to 500’ wireless transmission  
Video and audio transmission  
Quad, Scan, and Full screen view  
Supports up to 4 cameras  
Infrared LEDs for night vision (up to 20’  
Built-in rechargeable Lithium Polymer battery (up to 3 hours for the camera and 3.5 hours for the  
monitor)  
4GB SD card included for video recording (supports up to 32GB)  
Instant record  
Digital PentaZoom  
Remote access to live video via iPhone®/iPad® app, Android™ Smartphone/Tablet app, and PC.  
E-mail alert of motion detection  
4
GettInG starteD  
usInG thIs manuaL  
This manual is set up in six main sections:  
Getting Started. This section describes your hardware and how to physically set it up.  
Uniden Guardian™ Lullaboo Firmware Operations Overview. This section lists basic operations in  
an abbreviated format. It references screen details in the third section.  
Guardian Lullaboo Screen Descriptions. Here you will find detailed descriptions of each screen  
and how it is used.  
Remote Access. This section tells you how to connect your baby monitor to the internet and  
access it from your PC or other devices.  
Maintaining Your System  
Solving Problems  
What’s InCLuDeD  
You should have the following items:  
Lullaboo G403 Monitor and Cradle (1 each)  
Lullaboo G403 Camera (1)  
Lullaboo G403 Camera Stand (1)  
AC Power Adapters (2)  
Mounting Screws and Anchors  
Ethernet Cable  
SD card (4GB included; supports up to 32GB)  
Owner’s Manual  
If any items are missing or damaged, contact our Customer Care Line immediately.  
Never use damaged products!  
5
GettInG to KnoW the monItor anD Camera  
Monitor  
Cradle  
Antenna  
(back/side)  
Reset  
Receiver  
Power Dock  
Power  
On/Oꢀ  
Data Cable  
Connection  
SD slot  
AC Power  
Connection  
AC Power  
Connection  
Pull-Out  
Stand  
Camera  
Antenna  
Light Sensor  
Power  
IR LEDs  
Link  
Lens  
DC Jack  
Charge Link Power Microphone  
LEDs  
6
What the LIGhts mean  
LED  
State  
On  
What it means  
The camera is on.  
Power  
(Blue)  
Off  
The camera is off.  
Flashing The camera is in pairing mode.  
On  
Link  
The camera is connected to the monitor.  
(Amber)  
Off  
On  
The camera is in standby.  
The battery is charging.  
The battery has charged.  
Charge  
(Green)  
Off  
settInG uP the equIPment  
set uP the monItor  
1. If you are using the monitor as a stand-alone unit, flip out the stand on the back of the monitor  
and extend the antenna. Connect an AC adapter to the power input on the side of the monitor.  
If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC  
adapter to the input on the back of the cradle. Extend the antenna.  
2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.  
3. Press and hold the PoWer button on the top of the monitor for 3 - 4 seconds to power it up.  
4. The monitor displays the Uniden Welcome screen for a few seconds and then transitions to the  
LIVE view.  
The screen remains dark until the camera is powered up.  
7
mount the Camera stanD  
General Guidelines  
The camera included with your monitor is NOT weatherproof; it is an indoor camera.  
As dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the  
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.  
Placement considerations  
Consider the following when placing a camera:  
The clearest line-of-sight between the camera and monitor is best.  
Walls, especially brick and concrete, shorten the transmission distance.  
Placement next to windows allows better transmission.  
Optimized motion detection range is 6 - 12 feet for the camera. The farther away an object is, the  
less accurate the motion detection.  
Avoid having a direct light source in view of the camera (ceiling or floor lamps, spotlights on  
your property or neighboring properties, street lights, etc.).  
You can mount the stand on a wall, table-top, or the ceiling. If you mount the stand on the ceiling  
or an overhang in the house, just turn the camera right-side up once it is installed. When you are  
positioning the camera, you might want to bring the monitor along; it’s much easier to get the  
camera into the right position when you have the display handy.  
1. Hold the base of the camera stand where you want to mount it and mark the location of the  
screw holes.  
2. Use the included screws and anchors to attach the base to the wall or ceiling.  
3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.  
8
attaCh the Camera  
Place the stand swivel mount over the camera’s stand  
connection and slide the mount to the left until it clicks  
in place.  
ConneCt to PoWer  
1. Insert the AC adapter power plug into the camera’s DC adapter input jack. Plug the  
other end into a 120 volt AC (standard indoor) power  
outlet.  
2. Press PoWer and make sure the blue power LED turns on. If  
it doesn’t, try reconnecting the AC adapter, making sure the  
power outlet isn’t controlled by a wall switch.  
AC adapter  
power plug  
settInG uP Your sYstem  
You can now set your camera and system to your preferred settings.  
Camera settInGs  
Brightness (“Guardian Lullaboo Settings Screen” on page 18)  
Motion Detection (“Guardian Lullaboo Settings Screen” on page 18)  
Schedule Recordings (“Schedule Record” on page 25)  
sYstem settInGs  
Power Saving (“Power Saving” on page 31)  
Screen Auto Lock (“Screen Auto Lock” on page 32)  
Time (“Time” on page 33)  
Security code (“Security Code” on page 27)  
9
Language (default language is English; “Changing the Language” on page 36)  
reCorDInG settInGs  
Motion Detection (“Motion Detection” on page 22)  
Schedule Recordings (“Schedule Record” on page 25)  
10  
unIDen GuarDIan LuLLaBoo FIrmWare  
oPeratIon oVerVIeW  
Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that  
lets you choose groups of operations. For example, when you tap on the camera icon in the Pop  
Up menus, you can set how you want the main viewing screen - called the live screen - to display  
images from the paired cameras. You can scan between cameras, show all cameras on a single  
screen (Quad view), or only display a specific camera.  
The live screen lets you view the camera transmissions. It also lets you set up your screen display  
and make adjustments to it. Icons on the screen itself let you monitor power and camera status.  
Lullaboo’s firmware always defaults to the Live screen in Quad mode after being idle for  
2 minutes while in any other system screen. This default ensures that the system is ready  
to record video even if you forget to return to the Live screen. The system can only start a  
recording while in Live screen mode.  
LIVe sCreen  
Internet  
connection  
status  
Camera number/  
Signal strength  
Battery  
status  
SD card  
status  
Record  
status  
Motion  
status  
Pop up  
menu tab  
Pop up  
menus  
11  
What the ICons mean  
Icon  
What it does  
CamEra moDE  
Select how you want the Live screen to display camera input:  
Scan between cameras (5 seconds)  
Quad view (all paired cameras display)  
Full view (1 camera displays on full screen)  
VoLumE  
Adjust the volume level.  
unIDEn GuarDIan  
LuLLaboo FIrmWarE  
SEttInGS  
Access the Uniden Guardian Lullaboo Firmware operation screens or view  
recorded events.  
SD CapaCIty  
Indicates memory capacity remaining.  
battEry CapaCIty  
Displays battery capacity. This graphic shows battery at nearly full.  
IntErnEt/IntranEt  
StatuS  
Appears in Live view. Indicates connection to the internet/intranet is in  
progress.  
Appears in Live view and Pop Up menu. Indicates internet connection is  
established.  
12  
Icon  
What it does  
Appears in Live view. Indicates remote viewing is in progress.  
Appears in Live view. Indicates system is not connected to the internet.  
Appears in Live view. Indicates the intranet connection is established.  
CamEra numbEr  
Displays the camera number and signal strength through the status lines to  
the left of the number.  
rECorD StatuS  
Tap to start or stop recording for that camera.  
Steady on - Not recording  
Flashing - Recording  
motIon  
System indicates motion detection recording in progress.  
System indicates scheduled recording in progress.  
SChEDuLED  
pop up mEnu tab  
Opens and closes the Pop Up menu display.  
no SD CarD InDICator  
Displays red when the SD card is not present or is damaged.  
13  
ChanGInG hoW the LIVe sCreen DIsPLaYs  
The Live screen displays in 2 views - Quad view or Full view. Quad view divides the screen’s image  
area into 4 quadrants and displays camera video in each quadrant. If less than 4 cameras are on,  
only those cameras’ video will display on the Live screen.  
Full view displays a single camera’s video on the entire screen. If you are in Quad view, tap on the  
camera quadrant you want to expand to Full view. Tap on that image to return to Quad view.  
usInG the PentaZoom™ Feature  
While in any camera’s full screen view, selecting the + icon on the right side of the screen enables  
the PentaZoom feature. PentaZoom lets you select from 5 sections of the video image. Tap on a  
section and it will digitally zoom to full screen, focused on that section. Tap on the screen to return  
to Full screen mode; to go back to the PentaZoom screen, tap  
.
14  
usInG Your sYstem  
reCorDInG LIVe VIDeo  
1. On the live screen, tap  
for the camera to begin recording.  
2. Tap it again to stop recording.  
You can record from all cameras at the same time.  
PLaYInG BaCK reCorDeD VIDeo  
From the pop-up menus, tap  
the following icons as they  
appear on the screens:  
The Record List screen displays.  
1. Tap on the highlighted day containing the recording you want to view or on a specific camera  
to only view that camera’s recordings. The record list screen displays those recordings listed in  
a folder.  
If you tap on a day that is not highlighted, a folder displays with no recordings listed.  
2. Tap on the recording you want to view. It displays on the screen.  
3. Tap on any area of the screen that does not have control icons to bring up the playback  
progress bar. Tap that area again to close it.  
4. While playback progress is visible, you can fast forward/rewind by dragging the playback bar  
forwards or backwards.  
5. When playback ends, tap to return to the record list.  
You can press the double arrow to move to the next or previous video.  
15  
aDDInG neW Cameras  
Your monitor supports a total of four active cameras at a time. When you add a camera, you  
have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can  
communicate).  
some thinGs to knoW about PairinG cameras  
If a camera is already assigned to the selected channel, the monitor overwrites that camera link  
with the new one.  
Only pair one camera at a time! The monitor links to the first camera it detects. If two or more  
cameras are in pairing mode, you can’t control which camera the monitor will detect first.  
Pair camera  
1. From the Pairing camera screen (see “Pairing” on page 20), tap the camera image you want to  
pair. A processing icon displays for a 60 second countdown.  
2. During the 60 second countdown, quickly press and release the Pairing button on that camera  
(see ”Pairing” on page 20).  
3. The system automatically adjusts the camera on screen accordingly.  
4. If you have any trouble, consult the the table on page 17.  
16  
troubleshootinG camera PairinG  
Consult the following table for camera pairing troubleshooting suggestions:  
If...  
try...  
making sure the camera is plugged in and the  
blue LED is on.  
making sure that both the camera’s and the  
monitor’s antennas are extended.  
making sure the camera is paired to the correct  
channel.  
the camera’s signal status icon shows no bars  
re-pairing the camera and monitor.  
the camera’s signal status icon shows one or  
two bars or the video quality is poor  
See “General Guidelines” on page 8 for tips on  
improving video quality.  
making sure the camera is plugged in and the  
blue LED is on.  
pressing and releasing the pairing button quickly.  
Do not press and hold the pairing button.  
the camera won’t pair with the monitor  
17  
GuarDIan LuLLaBoo sCreen DesCrIPtIon  
oVerVIeW  
This section describes the Guardian Lullaboo firmware screens in detail. It provides a path to the  
screen being viewed.  
GuarDIan LuLLaBoo settInGs sCreen  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
This screen should display:  
The Guardian Lullaboo Settings screen highlights the Camera Setup option as the default.  
main Screen  
Sub Screens  
Pairing  
What it Does  
Camera Setup  
Pairs new cameras to the monitor.  
Makes the cameras visible to the monitor.  
Brightens or darkens the video of that camera.  
Camera On  
Brightness  
Recorder Setup Motion Detection  
Records when something moves in front of the camera  
and continues recording for 2 minutes. Motion detection is  
on by default.  
Email Alert  
Sends email notification to user’s PC and/or mobile device  
when Motion detection senses motion in front of the  
camera.  
Schedule Record  
Set up a schedule for pre-determined recording times and  
lengths.  
18  
main Screen  
Sub Screens  
What it Does  
Network Setup Internet Setup  
Select the type of internet connection to be used. (DHCP  
is most common.)  
Security Code  
Set a security code for remote access.  
Network Information Displays information about your network and the monitor’s  
unique DID number.  
Alarm Setup  
Period  
Set a length of time for the alarm to sound.  
Select a melody to play for the alarm.  
Melody  
System Setup  
Power Saving  
Temporarily turns off the LCD after the system is idle for 2  
minutes to conserve power.  
Screen Auto Lock  
Time  
Locks the screen from further activity until the screen is  
unlocked.  
Clock Alarm. Set an alarm.  
Time Setting. Set the current time.  
Timer. Time countdown.  
Format Storage  
System Upgrade  
Language  
Formats/erases all the data on the SD card.  
Upgrades the monitor firmware.  
Changes default language setting for the monitor (English,  
French, or Spanish).  
Quick Tips  
NA  
Provides a list of 10 common questions.  
19  
Camera setuP sCreen  
PaIrInG  
Your camera is paired to the monitor at the factory  
to channel 1. When you add a new camera to your  
system, you have to pair it to the monitor (that is, you  
have “introduce” the camera and monitor so they can  
communicate).  
some thinGs to knoW about PairinG cameras:  
If a camera is already assigned to the selected channel, the monitor overwrites that camera link  
with the new one.  
Only pair one camera at a time! The monitor links to the first camera it detects. If two or more  
cameras are in pairing mode, you can’t control which camera the monitor will detect first.  
From the pop-up menus, tap  
the following icons as they  
appear on the screens:  
This screen should display:  
1. Tap the camera image you want to pair. A processing icon displays for a 60 second countdown.  
2. Press and release PaIrInG on the camera’s side. The 60 second countdown will end when the  
pairing process is complete.  
3. The system will automatically adjust the camera on screen.  
Use this procedure to move a camera from one channel to a different channel.  
20  
Camera on  
When you add a camera to your system, pair the camera with the monitor and the system will  
automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the  
camera is turned on.  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
This screen should display:  
1. Tap the camera you want to turn on.  
2. A check mark replaces the X under the camera.  
3. To turn a camera off, tap the camera icon. An X replaces the checkmark and indicates the  
camera is turned off.  
Although the camera is turned off, it is still powered. The monitor will not receive video  
signals from that camera.  
21  
briGhtness  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
This screen should display:  
Tap the camera whose brightness level you want to change. The default brightness is 0, and the  
range is from -2 through 2.  
reCorDer setuP sCreen  
Use the recorder setup screen to select between  
motion detection, email alert, or schedule record  
.
motion detection  
From the pop-up menus, tap  
the following icons as they  
appear on the screens:  
This screen should display:  
1. Each camera’s motion detection sensitivity can be set independently. You can set the motion  
detection level to Off, Low, or High. Tap on the camera to cycle through these choices.  
22  
2. Tap to return to the main motion detection screen.  
The Motion Detection default setting is to Low. The system records for 2 minutes when  
motion is detected.  
email alert  
The Guardian Lullaboo firmware can notify you when cameras detect motion by sending you an  
e-mail alert. The e-mail alert contains information such as the time that motion was detected and  
by which camera. In order to enable this e-mail alert, you must enter both incoming and outgoing  
email addresses.  
Uniden recommends you use Gmail to set up as the outgoing email server.  
The outgoing email server (SMTP server) is responsible for sending out the email notification to tell  
users when motion is detected (Motion Detection must be activated).  
The incoming mail server (Email To) receives the email notification sent from the SMTP server. The  
user must be able to receive email on a Windows PC or on mobile devices (such as an iPhone, iPad,  
or Android smartphone or tablet) to receive e-mail alerts from the system.  
When you receive an email alert, you can view live video from your Windows PC, an iPhone, iPad,  
Android smartphone or Andriod tablet through apps. Free apps are available through the iTunes  
App store or the Android Market.  
From the pop-up menus, tap  
the following icons as they  
appear on the screens:  
This screen should display:  
23  
1. Tap enable to activate Email Alert or disable to deactivate it.  
2. Tap on the smtP server field. A keyboard screen displays.  
3. Enter your outgoing e-mail SMTP server (example: [email protected]). You can switch the  
keyboard from alphabetical characters to numbers/symbols and back again by tapping the  
field to the left of the space bar. Tap Return. The email alert screen displays again.  
4. Repeat the previous step for the Password field. Tap Return.  
The password entered here must be the same password as the password for the outgoing  
email account.  
5. Repeat Step 3 for the email to field. Only one incoming email account will be accepted by the  
Guardian Lullaboo firmware. The incoming email account can be different from the outgoing  
email account.  
6. Tap ok to save the settings, then tap  
<
to return to the previous screen.  
If you are using Gmail as the outgoing SMTP server, check SSL/TLS and use the data in the following  
table:  
24  
For Gmail  
Smtp.gmail.com  
SMTP Server  
SMTP Port  
Username  
Enter this.  
Enter this.  
465  
Enter your gmail address in full,  
including @gmail.com.  
Password  
Email to  
XXXXXXXXXX  
Enter the password for this  
gmail account.  
Enter the email address where  
you want the alerts sent.  
schedule record  
You can schedule up to 5 recording sessions. You are limited to the size of the SD card for how long  
a total recording time you have. These recording sessions must begin and end within a single 24-  
hour period. They cannot cross into the next day.  
From the pop-up menus, tap  
the following icons as they  
appear on the screens:  
This screen should display:  
1. Tap the camera number you want to record (1 - 4). You can select up to all 4 cameras to record.  
2. Set the recording start time. Tap the hour and number boxes separately and use the uP and  
DoWn arrows to scroll through the times.  
3. Tap the am/Pm block to toggle between them.  
25  
4. Tap on the blank Date box. The recorder setup  
calendar screen displays.  
5. Tap on the date you want the recording.  
The previous screen displays.  
6. Set up the recording and then tap saVe. You can select  
another recording session to schedule, return the  
previous screen, or return to the live screen.  
Scheduled recordings are broken up into 15 minute  
file sizes. For example, if you record a 50 minute event, you will have three 15-minute  
recordings plus one 5-minute recording.  
clear a scheduled recordinG  
1. Access the schedule record screen.  
2. Tap recording you want to clear (1-5). The screen displays the settings for that schedule.  
3. Tap CLear. The screen resets to the default values for that recording slot.  
netWorK setuP sCreen  
The network setup screen allows you to select your internet connection type and security code. You  
can also display system default configuration.  
From the pop-up menu, tap the following icons This screen should display:  
as they appear on the screens:  
26  
internet setuP  
1. Tap Internet Setup icon to display the internet setup screen.  
2. Tap on your selection and fill in the fields  
requested. Tap oK  
.
Selection  
Fields  
Static IP  
IP Address  
Subnet Mask  
Default Gateway  
DNS Server  
DHCP  
None  
3. Tap oK at the system reboot prompt. The network  
setup screen displays.  
DCHP is the most common connection. Your router will automatically assign an IP address  
to your Lullaboo system. Static IP is for those that have the ability to specify an IP address  
for the Lullaboo system.  
security code  
Set up your security code to limit who can have access to the system from a remote location.  
1. Tap Security Code icon to display the security code screen.  
27  
2. If you have not entered a security code, you can enter it here. If you have previously entered a  
security code, your current security code displays.  
The default security code is set to 123456. We recommend that you change this code to  
something you will remember. You will need the code to access your video from a remote  
device such as a smart phone or PC.  
3. Tap on the Change Code field. A keyboard screen displays.  
4. Enter your security code. You can switch the keyboard from alphabetical characters to  
numbers/symbols and back by tapping the field to the left of the space bar. Tap Return. The  
security code screen displays again.  
You must enter a security code to monitor your video from a PC or other device.  
5. Tap oK on the system reboot prompt. The network setup screen displays.  
6. Turn your Lullaboo monitor off then back on for the security code change to take effect.  
28  
netWork information screen  
1. Tap the Network Information icon to display the network information screen.  
2. Tap the arrow to return to the previous screen.  
The DID is a unique code specific to your monitor and is required (along with the security code)  
to gain remote access to your camera over the internet. The information in the DHCP setting is  
assigned to your monitor from your home router.  
aLarm setuP sCreen  
From the alarm setup screen, you can:  
Set the length of time the alarm sounds.  
Select a melody for the alarm.  
29  
Period screen  
This selection allows you to select the length of time the alarm will sound for the alarm clock.  
1. Tap Period. The change siren duration screen displays.  
2. Tap the duration you want the siren to last (2, 10, or 30 seconds) or tap None to turn sirens off.  
3. Tap to return to the previous screen.  
melody  
This selection allows you to select a melody for the siren.  
1. Tap Melody. The change siren melody screen displays.  
30  
2. A check mark appears on the melody you tap and the monitor briefly plays a sample of the  
selected melody.  
3. Tap the BACK arrow to return to the previous screen.  
sYstem setuP sCreen  
PoWer savinG  
When you turn on Power Saving mode, the monitor goes into sleep mode (LCD turns off) after it is  
idle for 2 minutes. Press the PoWer button once to reactivate the monitor. (Default = Disable).  
If a motion detection event or scheduled recording begins, the LCD turns back on.  
1. Tap Power Saving icon, then Enable to activate Power Saving mode (Default = Disable).  
31  
2. A check mark appears on your selection.  
3. Tap to return to the previous screen.  
screen auto lock  
When you turn on Auto Lock mode, the monitor will automatically enter screen lock mode after it  
has been idle for 2 minutes. Auto Lock disables the touchscreen and removes the icons from the  
display.  
When the auto-lock feature has been enabled and your Live screen is locked, just tap the PoWer  
button once to unlock the screen and return to normal touch screen operation. At any time from  
the Live screen, you can manually lock the system by tapping the PoWer button, whether or not the  
auto-lock feature has been enabled.  
1. Tap Screen Auto Lock. The activate touch screen operation auto-lock screen displays.  
2. Tap your selection; a check mark displays.  
3. Tap the BaCK arrow to return to the previous screen.  
32  
time  
The time screen lets you set up clock alarms, set the system time, and set a timer.  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
The following screen displays:  
clock alarm  
This feature operates as an independent alarm clock. It does not affect the operation of live video or  
recording video.  
1. Tap  
to display the clock alarm screen.  
2. Tap on an alarm button (total of 5 to select from).  
3. Tap on the hour block. The uP/DoWn arrows move to the hour block. Set the hour.  
33  
4. Tap on the minute block. The uP/DoWn arrows move to the minute block. Set the minute.  
5. Tap on am/Pm to toggle between the two.  
6. Tap saVe when you are finished.  
time settinG  
This screen contains fields to set the Month, Day, Year, Hour, Minute, and AM/PM.  
1. Tap  
to display the time setting screen.  
2. Tap on each field to set it. The uP/DoWn arrows shift to that field. Use uP/DoWn to set the field.  
3. Tap on the AM/PM block to switch between the two.  
4. Tap saVe when you are finished.  
It is important to set the correct time to ensure that the recorded video files and the  
scheduled record times are correct.  
34  
timer  
This feature operates as an independent timer. It does not affect the operation of live video or  
recording video.  
1. Tap  
to display the timer screen.  
2. Tap on each field to set it. The uP/DoWn arrows shift to that field. Use uP/DoWn to set the field.  
3. Tap start to begin the timer. When the timer reaches 00:00, an alarm beeps until you tap oK  
.
format storaGe  
When using an SD card other than the one provided, it is highly recommended that you format the  
card using these procedures. Formatting any SD card deletes all files on that card.  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
The Format Storage screen displays:  
The Lullaboo system supports up to a 32 GB SD card.  
35  
1. Tap on start; a warning statement displays.  
2. Tap oK to proceed to format storage or tap CanCeL to discontinue and return to the previous  
screen.  
3. The system indicates success or failure.  
sYstem uPGraDe  
To upgrade the Uniden Guardian Lullaboo firmware, you will need to download the file from the  
directory of the SD card used in your Lullaboo baby monitor.  
From the pop-up menu, tap the  
following icons as they appear  
on the screens:  
This screen should display:  
LanGuaGe  
chanGinG the lanGuaGe  
English is the default language. When you change languages, all system settings default to the  
original factory settings. You will have to reenter any specialized settings.  
36  
From the pop up menus, tap  
the following icons as they  
appear on the screens:  
This screen should display:  
1. Select a language to change to that language. The restore default settings screen displays.  
2. Tap oK to continue with the language reset. The system will reboot in about 5 seconds. If you  
do not want to reset the language, tap CanCeL and return to the previous screen.  
Changing the language will reboot the system and ask you to recalibrate the touch screen.  
Follow the instructions on the screen.  
quICK tIPs  
The Quick tips screen provides more detail into 10 common areas. Tap on a subject to display the  
information.  
37  
remote aCCess  
oVerVIeW  
Uniden’s Lullaboo baby monitor lets you view live video from your Windows® PC, an iPhone®, iPad®,  
or AndroidTM smartphone or tablet. Free apps are available through the iTunes® App Store or the  
Android Market.  
This system uses P2P remote access technology and does not require configuring your router, port  
forwarding or a remote DDNS service.  
The number of remote viewers is determined by the amount of “available upload  
bandwidth” on your home network. Each remote viewer requires ~350kbps of bandwidth  
on the network.  
sYstem requIrements  
Microsoft® Windows XP, Vista, or Windows 7  
Internet Explorer® 8 or greater.  
iPhone® or  
iPad® or  
AndroidTM smartphone or tablet  
ConneCtInG to the Internet  
The cradle charges your monitor as well as provides an internet connection. When you are  
connected to the internet, live video will not display on the monitor.  
For this procedure, the AC adapter must be connected to the cradle and not to the monitor.  
Reconnect the AC adapter if necessary.  
1. Connect one end of the Ethernet cable into the back of the cradle (“Getting to Know the  
Monitor and Camera” on page 6).  
38  
2. Connect the other end into your primary router (typically, the router from your service  
provider).  
3. Place cradle maximum distance away from your router.  
4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to  
only charge the monitor.  
5. Tap connect. The Internet Connection Status Indicator appears on the upper left of the LIVE  
screen indicating that the system is connected to the internet.  
While the system is connected to the internet:  
The LIVE screen display rate may reduce to 2 - 3 frames per second.  
The touch screen’s control operation will be limited. To return to full control of the touch  
screen, disconnect from the internet. Tap on the Pop Up menu and then select charge only  
.
6. When you connect remotely to the monitor, the Internet Connection Status Indicator shows  
that remote view is in progress.  
ConneCtInG to the Intranet (home netWorK)  
When the monitor is placed in the cradle and “charge only” is selected, you can still access your live  
video from a PC or smart phone as long as those devices are also connected to the same network  
as the monitor. For example your smart phone is connected to your home network via WiFi. In this  
case, live video will still be displayed on the monitor as well as on the smart phone.  
DoWnLoaDInG anD usInG the aPPs  
anDroIDTM  
doWnload  
You can use a Google® AndroidTM smart phone or tablet with your system to remotely connect to  
and view live camera video. Follow these steps to download, add, and use the app.  
39  
1. From your AndroidTM smart phone or tablet  
device, search the Android Market for uniden  
Guardian  
.
2. Download and install this app to your device.  
3. Launch the app; select add to add your system  
information to the app.  
4. Enter a name for your system in the system name  
field.  
5. Enter the same DID code from the back of your  
Lullaboo monitor in the did field  
.
6. Enter the same security code that you set on your  
Lullaboo monitor in the security code field.  
7. Select save  
.
8. Select the system you wish to view.  
40  
aPP oPeration  
When you open the APP on your Android phone, the image displayed on the main screen is the last  
camera image, captured automatically, from your previously established session.  
Tap to add an additional Guardian system.  
Tap to enter System Setup page.  
Tap to refresh the system.  
Tap to enter the APP Information page. The screen displays the  
APP version number and the API version number. Tap OK to exit.  
Main screen  
If you have multiple systems, scroll down and tap on the system image you want to view.  
To View Video:  
1. Select a system.  
2. Select a camera from the drop-down menu.  
3. View video.  
You can turn your device sideways and go to a  
horizontal view.  
4. Tap return to stop the video and enter the system page.  
To Take Snapshots from Video:  
Two icons display on the screen - Snapshot and Return.  
Snapshot icon. Tap to take a picture.  
Return icon. Tap to return to the Main screen  
41  
IPhone®  
In a similar fashion to the Android smart phone, you can use the Apple® iPhone® smart phone or  
iPad® tablet with your Lullaboo system to remotely connect to and view camera videos. Follow  
these steps to download the Uniden Guardian iPhone® App and set it up to work with your  
Lullaboo.  
doWnload  
1. From your iPhone® or iPad®, go to the iTunes® App  
Store and search for uniden Guardian  
.
2. Download and install this App to your device.  
3. Launch the app; select settings then aDD to add your  
system information to the App.  
4. Enter a name for your system in the system name field.  
5. Enter the same DID code from your Lullaboo monitor in the  
did field  
.
6. Enter the same security code that you set on your Lullaboo  
monitor in the security code field.  
7. Tap save  
.
When you tap save, the video streams automatically with  
Camera 1 selected by default.  
aPP oPeration  
When you open the APP on your iPhone or iPad, several icons display on the bottom task bar.  
42  
Tap to add an additional Guardian system.  
Tap to enter System Setup page.  
Tap to refresh the system.  
Tap to enter the APP Information page. The screen displays the  
APP version number and the API version number. Tap OK to exit.  
Main screen  
If you have multiple systems, scroll down and tap on the system image you want to view.  
to vieW video:  
1. Select a system.  
2. Select a camera from the drop-down menu.  
3. View video.  
You can turn your device sideways and go to a  
horizontal view.  
4. Tap return to stop the video and enter the system page.  
to take snaPshots from video:  
Two icons display on the screen - Snapshot and Return.  
Snapshot icon. Tap to take a picture.  
Return icon. Tap to return to the Main screen.  
43  
soLVInG ProBLems  
If you have any trouble with your system, try these simple steps. If you are still having a problem  
with your camera, check the manual that came with your camera. If you still have a question, call  
our Customer Care Line; see “Customer Care” on page 2.  
If…  
try..  
Increasing the sensitivity of the motion sensor (see page 20).  
Checking the settings on the Record screen (see page 18).  
The motion sensor won’t  
respond to movement.  
Decreasing the sensitivity of the motion sensor (see page 20).  
Refer to “Placement Considerations” on page 8.  
The motion sensor goes off  
when there’s nothing there.  
The video files play with a Quicktime® player. Download this free  
Video will play in players such as Windows Media® Player if an  
H.264 CODEC plug-in is installed.  
I can’t play my video clips  
in another program  
I schedule a recording,  
save the schedule, and the  
recording does not happen  
at the scheduled time.  
Ensure that the system time is set to the current time.  
Make sure that the SD card is inserted into the monitor and there is  
still memory available on that card.  
Making sure the camera is plugged in and the blue LED is on.  
Making sure the camera is paired to the correct channel.  
Re-pairing the camera and monitor.  
Moving the camera closer to the monitor; it might be out of range.  
Make sure the camera setting is turned on in Camera Setup (see  
“Camera On” on page 21).  
The camera’s signal status  
icon shows no bars  
The camera’s signal status  
icon shows one or two bars  
or the video quality is poor  
See “General Guidelines” on page 8 for tips on improving video  
quality.  
44  
If…  
try..  
Making sure the camera is plugged in and the blue (Power) LED is  
on and the yellow (Pairing) LED is flashing.  
Pressing and releasing the pairing button quickly. Do not press and  
hold the pairing button.  
The camera won’t pair with  
the monitor  
When I power up my  
monitor and camera for the  
first time, it seems to be on  
but there is no picture on  
the screen  
If the Power Saving feature has been turned on, the monitor’s LCD  
screen will power off. Tap poWEr to turn the LCD back on.  
I have my regular Live  
screen but there are no  
icons.  
tapping poWEr on top of the monitor. Screen lock may be on and  
tapping poWEr will unlock the screen.  
45  
aDDItIonaL InFormatIon  
ProDuCt sPeCIFICatIons  
radio Frequency transceiver  
RF Frequency  
2.4 GHz  
Modulation  
GFSK  
Spread spectrum  
Anti Interference  
Frequency Hopping  
Clean Channel Dynamic Select  
Selectable camera channel  
Data rate  
4
2 Mbps  
Transmitting range  
500 feet (152 meters) in an open area (line of sight)  
Image Specification  
Output Image resolution 480 X 272, 320 x 240 (QVGA)  
Image processing  
Exposure  
H.264  
Auto  
Auto  
White balance  
System Specifications Camera  
monitor  
Weight  
4.1 oz (118 g)  
3.2 x 2.9 x 0.8” (90 x 49 x 20 mm)  
G403: 7 oz (198 g)  
5 x 3 x 0.9” (132 x 79 x 24 mm)  
Dimension  
Operating temperature  
Battery charging temp.  
Input voltage  
+14° F (-10° C) to 122° F (+50° C)  
0° C (32° F) to +45° C (113° F)  
100-240 V AC @ 60 or 50 Hz  
46  
System Specifications Camera  
Operating voltage  
monitor  
5 V DC @ 1 Amp  
650 mA max  
Power consumption  
Low light solution  
Low light sensitivity  
Picture sensor  
Lens  
12 IR LEDs, 1 Low light sensor  
1-8 lux  
OV7725 1/4’ Color CMOS  
F3.6mm H:53 V:40  
Lithium-Polymer Battery Warning  
This equipment contains a rechargeable lithium-polymer battery.  
Do not charge the battery in temperatures below 32° F (0° C) or higher than 113° F (45° C).  
Do not open or mutilate the battery.  
The rechargeable batteries contained in this equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable battery pack used in this equipment with any charger other  
than the one designed to charge this battery pack as specified in the owner’s manual. Using  
another charger may damage the battery pack or cause the battery pack to explode.  
CAUTION! Rechargeable Batteries Must Be Recycled or Disposed of Properly.  
recycling and Disposal Information  
Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in  
your municipal trash collection.  
Consult your local waste management authority or a recycling organization like earth911.com to find an  
electronics recycling facility in your area.  
47  
If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for  
recycling.  
FCC Compliance Information  
Part 15 Compliance statement  
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules and ETSI (EN) 300328. These limits are designed to provide reasonable protection  
against harmful interference in residential installations. This equipment generates, uses, and can radiate  
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause interference to radio or television equipment reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Move the equipment away from the monitor.  
Plug the equipment into an outlet on a circuit different from that to which the monitor is connected.  
Consult the dealer or an experienced radio/television technician for additional suggestions.  
CautIon! any changes or modifications to this equipment not expressly approved by the party  
responsible for compliance could void your authority to operate the equipment.  
rF exposure Information  
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm  
(7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or  
transmitter.  
48  
IC Compliance Information  
radio equipment notice  
The term “IC:” before the radio certification number only signifies that Industry Canada technical  
specifications were met. Operation is subject to the following two conditions: (1) this device may not  
cause interference, and (2) this device must accept any interference, including interference that may  
cause undesired operation of the device. “Privacy of communications may not be ensured when using this  
device”.  
Ce Compliance Information  
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/  
EEC); R&TTE(1999/5/EC) issued by the Commission of the European Community. Compliance with these  
directives implies conformity to the following European Norms:  
EMC: EN 301 489  
LVD: EN 60950  
Radio: EN 300 328  
three-Year Limited Warranty  
Important: evidence of original purchase is required for warranty service.  
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants,  
for three years, to the original retail owner, this Uniden Product to be free from defects in materials &  
craftsmanship with only the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 36  
months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not  
maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired  
by someone other than an authorized Uniden service center for a defect or malfunction covered by this  
warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured  
by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this  
product.  
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while  
this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to  
you without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor  
49  
or its representatives in connection with the performance of this warranty. Warrantor, at its option, may  
replace the unit with a new or refurbished unit.  
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE  
PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER  
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES  
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so  
the above limitation or exclusion may not apply to you.  
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary  
from state to state. This warranty is void outside the United States of America & Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the  
owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its  
original packaging). Disconnect the battery from the Product & separately secure the battery in its own  
separate packaging within the shipping carton. The Product should include all parts & accessories originally  
packaged with the Product. Include evidence of original purchase & a note describing the defect that has  
caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd. Fort Worth, TX 76155  
© 2013 Uniden  
America Corporation  
All rights reserved  
Printed in China  
50  

York Sunline 2000 D1ee 060 User Manual
Toshiba Air Conditioner Ras B13skvp E User Manual
Samsung Sc18tb1 User Manual
Oreck Professional Air Purifier 21057 03 User Manual
Mitsubishi Electronics G 50a User Manual
MARTIN YALE 620RC User Manual
CRAFTSMAN 917.274632 User Manual
BLONDER TONGUE FIBT 1310 06 User Manual
BLAUPUNKT TEXAS 600 User Manual
BLACK DECKER HHVJ315JD User Manual