Projector
UM383WL
User’s Manual
Please visit our web site for User’s Manual in the latest version:
Model No.
NP-UM383WL
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your NEC projector and keep the manual handy for future reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be sufficien to cause electrical
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of this
unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS
CAN BE FULLY INSERTED.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If this should happen, continue to use your projector. The static background from previous images will
disappear.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California
to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
FCC Information (for USA only)
WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government
regulation could void your right to operate this equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
i
Important Information
Disposing of your used product
If you wish to dispose of used electrical and electronic products, please contact your local authority
and ask for the correct method of disposal.
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent fir and shock. Please read
them carefully and heed all warnings.
Installation
• Do not place the projector in the following conditions:
- on an unstable cart, stand, or table.
- near water, baths, or damp rooms.
- in direct sunlight, near heaters, or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
• If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
- The projector must be installed by qualifie technicians in order to ensure proper operation and reduce the risk
of bodily injury.
- In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes.
- Please consult your dealer for more information.
• Do not install and store the projector in the below circumstances. Failure to do so may cause of malfunction.
- In powerful magnetic field
- In corrosive gas environment
- Outdoors
WARNING
•
•
Do not place any objects, which are easily affected by heat, in front of the projection window. Doing so could
lead to the object melting from the heat that is emitted from the light output.
Do not use a spray containing flammable gas to get rid of accumulated dust and dirt on the filters and the
projection window. It may cause of fire.
Place the projector in a horizontal position
The projector should not be installed in any way other than the desktop, ceiling mount, and ways described in this
manual, otherwise light life could decrease dramatically.
ii
Important Information
Fire and Shock Precautions
• Ensure that there is sufficien ventilation and that vents are unobstructed to prevent the build-up of heat inside
your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
• Do not try to touch the exhaust vent as it can become heated while the projector is turned on and immediately
after the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off
with the POWER button or if the AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to
retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver
into your projector. If something should fall into your projector, disconnect it immediately and have the object
removed by a qualifie service personnel.
• Do not place any objects on top of the projector.
• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire
• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply
fit this requirement before attempting to use your projector.
• Do not look the lens while the projector is on. Serious damage to your eyes could result. The following label, that
is indicated near the lens-mounting-section on the projector cabinet, describes this projector is categorized in the
risk group 2 of IEC 62471-5: 2015. As with any bright source, do not stare into the beam, RG2 IEC 62471-5: 2015.
• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause
unpredictable outcome such as fire or injury to the eyes.
• Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.
Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the
exhaust.
• Do not splash water over the projector. Doing so can cause electrical shock or fire. If the projector gets wet, turn
off the projector, unplug the power cord and have the projector serviced by a qualified service personnel.
• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire.
- Do not use any power cord other than the one supplied with the projector.
- Do not bend or tug the power cord excessively.
- Do not place the power cord under the projector, or any heavy object.
- Do not cover the power cord with other soft materials such as rugs.
- Do not heat the power cord.
- Do not handle the power plug with wet hands.
• Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel
under the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector, or if it has been exposed to rain or water.
- If the projector does not operate normally when you follow the instructions described in this user’s manual.
- If the projector has been dropped or the cabinet has been damaged.
- If the projector exhibits a distinct change in performance, indicating a need for service.
• Disconnect the power cord and any other cables before carrying the projector.
• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the light.
• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.
• When using a LAN cable:
For safety, do not connect to the terminal for peripheral device wiring that might have excessive voltage.
iii
Important Information
CAUTION
• Do not use the adjustable tilt foot for purposes other than originally intended. Misuses such as gripping the
tilt-foot or hanging on the wall can cause damage to the projector.
• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select
[SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].)
•
This projector has a "click" sound at power on or during some switching, which is not a malfunction.
Remote Control Precautions
•
•
•
•
•
•
•
•
•
Handle the remote control carefully.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Do not short, heat, or take apart batteries.
Do not throw batteries into fire
If you will not be using the remote control for a long time, remove the batteries.
Ensure that you have the batteries’ polarity (+/−) aligned correctly.
Do not use new and old batteries together, or use different types of batteries together.
Dispose of used batteries according to your local regulations.
About High Altitude mode
•
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters
or higher.
Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE]
can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes
and turn on the projector.
•
Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical
components such as the light.
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue
such as a coffee shop or hotel and employing compression or expansion of the screen image with the following
functions may raise concern about the infringement of copyrights which are protected by copyright law.
[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.
Cable Information
Use shielded cables or cables attached ferrite cores so as not to interfere with radio and television reception.
For details, please refer to "6.2. Making Connections" in this user's manual.
iv
Important Information
Power management function
The projector has power management functions. To reduce power consumption, the power management functions
(1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial
cable connection, use the on-screen menu to change the settings for 1 and 2.
1. STANDBY MODE (Factory preset: NORMAL)
To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE].
NOTE:
• When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work:
MONITOR OUT terminal, AUDIO OUT terminal, LAN functions, Mail Alert function, DDC/CI (Virtual Remote Tool). Please refer to page
• When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes, [STANDBY
MODE] will transit into [NORMAL] automatically for the purpose to save the consumption power.
2. AUTO POWER OFF (Factory preset: 1 hour)
To control the projector from an external device, select [OFF] for [AUTO POWER OFF].
NOTE:
• When [1:00] is selected for [AUTO POWER OFF], you can enable the projector to automatically turn off in 60 minutes if there is no signal
received by any input or if no operation is performed.
v
Table of Contents
Important Information............................................................................................i
1. Introduction.......................................................................................................... 1
❶ What’s in the Box?........................................................................................................ 1
❷ Introduction to the Projector ......................................................................................... 2
Features you’ll enjoy ............................................................................................... 2
About this user’s manual......................................................................................... 3
❸ Part Names of the Projector.......................................................................................... 4
Front/Top................................................................................................................. 4
Controls/Indicator Panel.......................................................................................... 6
Terminal Panel Features.......................................................................................... 7
❹ Part Names of the Remote Control............................................................................... 8
Battery Installation................................................................................................... 9
❶ Flow of Projecting an Image........................................................................................ 10
❸ Turning on the Projector.............................................................................................. 12
❹ Selecting a Source ...................................................................................................... 14
❺ Adjusting the Picture Size and Position ...................................................................... 15
Focus..................................................................................................................... 18
Zoom .....................................................................................................................19
Digital Zoom........................................................................................................... 20
Adjust the Tilt Foot................................................................................................. 21
❻ Correcting Keystone Distortion [KEYSTONE] ............................................................. 22
❼ Optimizing Computer Signal Automatically ................................................................ 24
Adjusting the Image Using Auto Adjust................................................................. 24
❽ Turning Up or Down Volume .......................................................................................24
❾ Turning off the Projector ............................................................................................. 25
❿ When Moving the Projector ........................................................................................ 25
3. Convenient Features..................................................................................... 26
❶ Turning off the Image and Sound ............................................................................... 26
❷ Freezing a Picture........................................................................................................ 26
❸ Magnifying a Picture ................................................................................................... 27
❹ Changing Eco Mode/Checking Energy-Saving Effect ............................................... 28
Cornerstone........................................................................................................... 30
vi
Table of Contents
Preventing the Unauthorized Use of the Projector [SECURITY] ..................................... 34
❼ Controlling the Projector by Using an HTTP Browser ................................................ 37
4. Using the Viewer............................................................................................. 43
❶ What you can do with the Viewer ............................................................................... 43
❷ Projecting images stored in a USB memory device ................................................... 45
5. Using On-Screen Menu................................................................................ 51
❶ Using the Menus ......................................................................................................... 51
❷ Menu Elements ........................................................................................................... 52
❸ List of Menu Items ...................................................................................................... 53
❹ Menu Descriptions & Functions [SOURCE] ................................................................ 56
HDMI1 and HDMI2 ................................................................................................ 56
COMPUTER........................................................................................................... 56
VIDEO .................................................................................................................... 56
USB-A.................................................................................................................... 56
LAN........................................................................................................................ 56
❺ Menu Descriptions & Functions [ADJUST] ................................................................. 57
[PICTURE].............................................................................................................. 57
[IMAGE OPTIONS]................................................................................................. 60
[AUDIO].................................................................................................................. 64
❻ Menu Descriptions & Functions [SETUP] ................................................................... 65
[GENERAL]............................................................................................................. 65
[MENU]................................................................................................................... 68
[INSTALLATION].................................................................................................... 69
[OPTIONS(1)] ......................................................................................................... 71
[OPTIONS(2)] ......................................................................................................... 73
❼ Menu Descriptions & Functions [INFO.] ......................................................................77
[USAGE TIME]........................................................................................................ 77
[SOURCE(1)] .......................................................................................................... 77
[SOURCE(2)] .......................................................................................................... 78
[WIRED LAN].......................................................................................................... 78
[CONNECTION] ..................................................................................................... 78
[VERSION].............................................................................................................. 79
[OTHERS]............................................................................................................... 79
❽ Menu Descriptions & Functions [RESET] ....................................................................80
Returning to Factory Default [RESET] ................................................................... 80
6. Installation and Connections................................................................... 81
❶ Setting Up the Screen and the Projector .................................................................... 81
Tables of screen sizes and dimensions................................................................. 81
Example of installation on a desktop..................................................................... 83
Lens shifting range ................................................................................................ 84
vii
Table of Contents
❷ Making Connections ................................................................................................... 86
Connecting Your Computer................................................................................... 86
Connecting an External Monitor............................................................................ 88
Connecting HDMI Input......................................................................................... 91
Connecting to a Wired LAN................................................................................... 92
7. Maintenance ..................................................................................................... 93
❶ Cleaning the Filters ..................................................................................................... 93
❷ Cleaning the Projection Window ................................................................................ 95
❸ Cleaning the Cabinet .................................................................................................. 95
8. Appendix .............................................................................................................. 96
❶ Troubleshooting .......................................................................................................... 96
Feature of each indicator....................................................................................... 96
Indicator Message (Status message) .................................................................... 96
Indicator Message (Error message)....................................................................... 97
Common Problems & Solutions .......................................................................... 100
❷ Specification ............................................................................................................. 102
❸ Cabinet Dimensions .................................................................................................. 104
❺ Compatible Input Signal List .....................................................................................106
❻ PC Control Codes and Cable Connection ................................................................ 107
❽ Troubleshooting Check List ...................................................................................... 109
9 EGISTER YOUR PROJECTOR! (for residents in the United States) .......................... 111
viii
1. Introduction
❶ What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your projector.
Projector
Batteries (AAA × 2)
Remote control
(7N901053)
Power cord
(7N080236/7N080242)
Computer cable (VGA)
(7N520089)
For North America only
Limited warranty
NEC Projector CD-ROM
User’s manual (PDF)
(7N952943)
Important Infomation (7N8R0231)
Quick Setup Guide (7N8R0241)
•
•
1
1. Introduction
❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
Features you’ll enjoy:
•
Ultra short throw distances
Ultra short focal lenses provide for a larger image using a shorter throw distance when compared to a typi-
cal projector lens.
Max 130", throw distance:42.9 cm/17 inches
(The throw distance refers to the distance between the screen and the screen side of the projector)
•
Quick start (6 seconds*1), Quick Power Off, Direct Power Off
6 seconds*1 after turning on the power, the projector is ready to display PC or video images.
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even
when projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
1
*
The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen mes-
sage.
Tilt-free
•
This projector can be set to any angle within a vertical 360° range.
0.26 W (100-130 V AC)/0.39 W (200-240 V AC) in standby condition with energy saving technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that
consumes only 0.26 W (100-130 V AC)/0.39 W (200-240 V AC).
•
•
•
Carbon Meter
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO
MODE] is set to [AUTO ECO], [NORMAL], or [ECO].
The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off
and in the INFO of the on-screen menu.
High color gamut
The projector adopts HLD+LED new solid light source and optical components that can improve color reprodu-
cibility. The reproducible color gamut is greatly expanded compared to traditional lamp projectors (when
[ADJUST] - [PICTURE] - [PRESET] is set to [GRAPHIC] ).
HLD+LED new light source with 20,000 hours long life
•
•
•
With a brightness of 3,800 lumens and an ultra long life of up to 20,000 hours, it maintains brightness of the
display throughout the life.
Wide range of input terminals (HDMI × 2)
The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog), Video. HDMI input
terminal on this product supports HDCP.
Compatible with the MultiPresenter application
This projector is compatible with the NEC MultiPresenter application, so multi-screen projection is possible
via the network (wired LAN).
2 ×10 W built-in speaker for an integrated audio solution
•
Two powerful 10 watt stereo speakers are built in.
2
1. Introduction
•
The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by as-
signing an ID number to each projector.
•
Convenient utility software (User Supportware)
This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, etc.) NaViSet Adminis-
trator 2 helps you control the projector by a computer via wired LAN connection. Virtual Remote Tool helps you
perform operations by a virtual remote control such as projector's power on or off and signal selection via wired
LAN connection. Moreover, it has function to send an image to the projector and register it as the logo data.
Please visit our web site for downloading each software.
AUTO POWER ON and AUTO POWER OFF features
•
•
•
The DIRECT POWER ON, AUTO POWER ON, AUTO POWER OFF, and OFF TIMER features eliminate the need
to always use the POWER button on the remote control or projector cabinet.
Preventing unauthorized use of the projector
Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security
chain opening to help prevent unauthorized access, adjustments and theft deterrence.
High resolution up to WUXGA*2
High resolution display - up to WUXGA compatible, WXGA native resolution.
An image with higher or lower resolution than the projector’s native resolution (1280 × 800) will be displayed
with Advanced AccuBlend.
•
2
*
When WXGA MODE is set to ON.
•
INTELLIGENT CONNECTION
It enables easily to connect your projector to computers or smartphones, on which the application software,
MultiPresenter, has been installed, by inputting PIN code.
About this user’s manual
The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find
an overview. If the section doesn’t apply, you can skip it.
3
1. Introduction
❸ Part Names of the Projector
Front/Top
Focus Ring
Lens shift cover
Zoom Lever
(→ page 19)
(→ page 16)
Controls
(→ page 6)
Lens(ProjectionWindow)
Indicators
(→ page 6)
Exhaust Vent
Heated air is exhausted from here.
Remote Sensor
(→ page 9)
Stereo Speaker (10W )
Security chain opening
Attach an anti-theft device.
The security chain opening accepts
security wires or chains up to 0.18
inch/4.6 mm in diameter.
4
1. Introduction
Terminal Panel Features
6
3
4
5
1
11
2 7
8
9
12
10
COMPUTER IN/ Component Input Terminal
(Mini D-Sub 15 Pin)
1.
COMPUTER AUDIO IN Mini Jack (Stereo Mini)
2.
3. HDMI 1 IN Terminal (Type A)
HDMI 2 IN Terminal (Type A)
4.
5.
SERVICE Port (USB Type B)
(for service purpose only)
6. COMPUTER OUT Terminal (Mini D-Sub 15 Pin)
AUDIO OUT Mini Jack (Stereo Mini)
7.
VIDEO IN Terminal (RCA)
8.
AUDIO IN L, R (RCA)
9.
LAN Port (RJ-45)
10.
11.
USB Port (Type A)
For USB memory
(→ page 45)
PC CONTROL Port (D-Sub 9 Pin)
12.
Use this port to connect a PC or control system.
This enables you to control the projector using serial
communication protocol. If you are writing your own
7
1. Introduction
Part Names of the Remote Control
1
3
4
2
6
7
10
DisplayPort Button
10.
(This button does not work in this series of projectors)
5
8
11. VIDEO Button (→ page 14)
12. USB-A Button (→ page 14, 45, 47)
13
16
12
9
11
15
14
18
19
13. USB-B Button (This button does not work on this
series of projectors)
14. LAN Button (→ page 14)
17
15. ID SET Button
20
(→ page 70)
Numeric Keypad Button/CLEAR Button
(→ page 70)
16.
17.
18.
21
26
22
23
FREEZE Button
(→ page 26)
28
25
29
AV-MUTE Button
24
27
(→ page 26)
19. MENU Button
30
(→ page 51)
33
20. EXIT Button (→ page 51)
31
32
21.
Button (→ page 51)
22. ENTER Button (→ page 51)
23. D-ZOOM (+)(–) Button
(→ page 27)
MOUSE L-CLICK Button (This button does not
work on this series of projectors)
24.
25.
26.
1. Infrared Transmitter
(→ page 9)
MOUSE R-CLICK Button (This button does not
work on this series of projectors)
2. POWER ON Button
PAGE / Button
(→ page 12)
(→ page 46)
POWER STANDBY Button
3.
(→ page 25)
27. ECO Button (→ page 28)
4. SOURCE Button
28. KEYSTONE Button
(→ page 14)
(→ page 22, 30)
PICTURE Button
(→ page 57, 59)
5. COMPUTER 1 Button
29.
30.
31.
32.
(→ page 14)
COMPUTER 2 Button (This button does not
work on this series of projectors)
VOL. (+)(–) Button
(→ page 24)
6.
7.
8.
AUTO ADJ. Button
(→ page 24)
ASPECT Button
(→ page 62)
FOCUS/ZOOM Button
HDMI 1 Button
(→ page 14)
(→ page 20)
33. HELP Button
9. HDMI 2 Button
(→ page 77)
(→ page 14)
8
1. Introduction
Battery Installation
1. Press firmly and slide the bat-
tery cover off.
2. Install new batteries (AAA).
Ensure that you have the bat-
teries’ polarity (+/−) aligned
correctly.
3. Slip the cover back over the
batteries until it snaps into
place. Do not mix different
types of batteries or new and
old batteries.
OPEN
OPEN
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• Do not throw batteries into fire
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries’ polarity (+/−) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
Operating Range for Wireless Remote Control
30°
30°
Remote control
22 feet/7 m
Remote sensor on
projector cabinet
30°
30°
• The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle
of the remote sensor on the projector cabinet.
• The projector will not respond if there are objects between the remote control and the sensor, or if strong light
falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
9
2. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
❶ Flow of Projecting an Image
Step 1
Step 2
Step 3
Step 4
Step 5
Adjusting a picture and sound
•
Step 6
• Making a presentation
Step 7
Step 8
• When Moving the Projector (→ page 25)
10
2. Projecting an Image (Basic Operation)
❷ Connecting Your Computer/Connecting the Power Cord
Connect your computer to the projector.
1.
This section will show you a basic connection to a computer. For information about other connections, see “6.
Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the computer’s port (mini
D-Sub 15 Pin). Turn two thumb screws of both terminals to fix the computer cable (VGA)
Connect the supplied power cord to the projector.
2.
First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cord in the wall outlet.
The projector’s power indicator will start blinking orange.
This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator
*
COMPUTER IN
Make sure that the prongs
are fully inserted into both
the AC IN and the wall
To wall outlet ←
outlet.
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if
the AC power supply is disconnected during normal projector operation.
Be careful to handle the projector.
11
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
1. Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will
become ready to use.
TIP:
• When the message “Projector is locked! Enter your password.”
is displayed, it means that the [SECURITY] feature is turned on.
Standby
Blinking
Power On
After you turn on your projector, ensure that the computer
or video source is turned on.
Blinking blue
light
Steady blue
light
Blinking orange light
NOTE:When no input signal is present,the no-signal guidance is displayed
(factory menu setting).
12
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you firs turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select
one of the 30 menu languages.
To select a menu language, follow these steps:
1. Use the ▲, ▼, ◀ or ▶ button to select one of the 30
languages from the menu.
2. Press the ENTER button to execute the selection.
After this has been done, you can proceed to the menu
operation.
If you want, you can select the menu language later.
NOTE:
• If the projector is shut off by DIRECT POWER OFF (pulling out the power cord) during projection, wait for 1 second at least for reconnect
the power cord for turning on the projector.
Failing to do so could result in no power to the projector. (There will be no stand-by LED)
Should this happen, unplug the power cord and plug it in again. Turn on the main power.
• If one of the following things happens, the projector will not turn on.
- If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projector
will not turn on to protect he internal system. If this happens, wait for the projector’s internal components to cool down.
- If the STATUS indicator lights orange with the power button pressed, it means that the [CONTROLPANEL LOCK] is turned on. Cancel
- If the light fails to light, and if the POWER indicator blinks in red and the LIGHT indicator lights in red, wait a full minute and then turn
on the power.
• While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button.
13
2. Projecting an Image (Basic Operation)
❹ Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the SOURCE button once. The projector will search for the avail-
able input source and display it. The input source will change as follows:
HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → LAN
•
With the SOURCE screen displayed, you can press the SOURCE
button a few times to select the input source.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the COMPUTER1, HDMI1, HDMI2, VIDEO or USB-A
buttons.
Selecting Default Source
You can so that it will be displayed each time the projector is turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button twice to select [SETUP] and the ▼ button or
the ENTER button to select [GENERAL].
3. Press the
▶
button four times to select [OPTIONS(2)].
4. Press the ▼ button five times to select [DEFAULT SOURCE SE-
LECT] and press the ENTER button.
The [DEFAULT SOURCE SELECT] screen will be displayed.
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
Restart the projector.
7.
The source you selected in step 5 will be projected.
TIP:
• When the projector is in Standby mode, applying a computer signal from a computer
connected to the COMPUTER IN input will power on the projector and simultaneously
project the computer’s image.
• OnWindows 7, a combination of theWindows and P keys allows you to set up external
display easily and quickly.
14
2. Projecting an Image (Basic Operation)
❺ Adjusting the Picture Size and Position
Use the lens shift dial, the adjustable tilt foot lever, the zoom lever and the focus ring to adjust the picture size and
position.
In this chapter drawings and cables are omitted for clarity.
Adjusting the projected image’s vertical and horizontal Adjusting the focus [Focus ring]
position [Lens shift]
Finely adjusting the size of an image
[Zoom lever]
(→ page 19)
Adjusting the throw angle (the height of an image)
[Tilt foot]
(→ page 21)
Correcting the keystone distortion [Keystone]
(→ page 22)
15
2. Projecting an Image (Basic Operation)
Adjusting the position of a projected image (Lens shift)
CAUTION:
Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your
eyes to strong light which could injure them.
Open the lens shift cover.
1.
Open with the cover’s stopper pushed forward.
•
The lens shift cover cannot be removed.
Stopper
2. Turn the lens shift dials clockwise or counterclockwise.
Vertical dial
Turn this clockwise or counterclockwise to adjust the projection position in the vertical direction.
Horizontal dial
Turn this clockwise or counterclockwise to adjust the projection position in the horizontal direction.
Lens shift dial Lens shift dial
(Vertical)
(Horizontal)
Upward Downward Leftward Rightward
NOTE:
• The dials can be turned more than one full turn, but the projection position cannot be moved more than the range indicated on the
following page. Do not force to turn the dials. Doing so may damage the dials.
• If the lens is shifted to the maximum in the diagonal direction, the edges of the screen will be dark or shaded.
• The vertical shift adjustment must be finished with an image shifted upward. If you finish the vertical shift adjustment with an image
shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down.
When adjusting the position of the lens, if you find that the dial does not move, it may have been beyond the adjustment range, do
not forcibly rotate the dial, otherwise there is a risk of damage. When there is a lack of image, it has been beyond the adjustment
range, adjust in the opposite direction to the range of full image.
•
16
2. Projecting an Image (Basic Operation)
3. Close the lens shift cover.
Insert the cover’s 2 (two) hooks into the grooves in the projector, then
close the cover.
Hook
Groove
TIP:
• The diagram below shows the lens shift adjustment range ([ORIENTATION]: [DESKTOP FRONT]).
Width of projected image
100% H
3%V
100% V
Height of projected image
3%V
2%H
2%H
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
17
2. Projecting an Image (Basic Operation)
Focus (Focus ring)
Open the lens shift cover.
1.
Open with the cover’s stopper pushed forward.
•
The lens shift cover cannot be removed.
Stopper
Rotate the Focus ring until you obtain the best focus.
2.
Focus ring
3. Close the lens shift cover.
Insert the cover’s 2 (two) hooks into the grooves in the projector, then
close the cover.
Hook
Groove
NOTE:
• It is recommended to perform focus adjustment after the projector has been projecting for more than 30 minutes in TEST PATTERN
mode. About TEST PATTERN, please refer to page 71.
18
2. Projecting an Image (Basic Operation)
Zoom (Zoom lever)
Open the Zoom cover.
1.
The zoom cover is a spring buckle, which can be opened by
gently pressing down.
•
The zoom cover cannot be removed.
Spring buckle
2. Adjust the Zoom lever left or right, until you obtain the best zoom.
Zoom lever
Close the zoom cover.
3.
Press down on the cover and hear a "ticking" sound to close the cover.
Spring buckle
19
2. Projecting an Image (Basic Operation)
Adjusting the size [Digital Zoom]
Use the remote control to finely adjust the size of the image.
1. Press the FOCUS/ZOOM button on the remote control.
The DIGITAL ZOOM bar will be displayed.
2. Press the or button to finely zoom in or out.
3. After completing the adjustment, press the ENTER button.
The DIGITAL ZOOM bar will be closed.
NOTE:
•
This feature allows you to electronically fine adjust the image size on the
screen.
•
This feature can not be used when USB-A or LAN is selected as an input
terminal.
20
2. Projecting an Image (Basic Operation)
Adjusting the tilt (Tilt foot)
Adjusting the left and right tilt.
1. Rotate the tilt foot to adjust the left and right tilt.
The tilt foot is equipped at the left and the right front bottom of the
projector.
If the projected image is tilted, rotate one of the tilt foot to adjust
the angle to project.
If keystone distortion is appeared, adjust it either by the button
on the cabinet or keystone button on the remote control
NOTE:
• Do not extend the tilt foot beyond its height limit (18 mm/0.7 inches). Doing
so may cause the tilt foot to come out of the projector.
• Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall or ceiling)
the projector can cause damage to the projector.
Up
Down
21
2. Projecting an Image (Basic Operation)
❻ Correcting Keystone Distortion [KEYSTONE]
When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For correcting this distor-
tion, you can use the “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting
in a crisp, square image.
The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distor-
tions when the projector is placed diagonally to the screen.
• Before performing KEYSTONE correction
The KEYSTONE correction has four features, KEYSTONE HORIZONTAL, KEYSTONE VERTICAL, PINCUSHION, and
CORNERSTONE. If the value of either CONERSTONE or PINCUSHION has corrected, KEYSTONE HORIZONTAL
and KEYSTONE VERTICAL are disabled. In this case, RESET the corrected values and restart to correct distortion.
1. Press the ▼ button on the projector cabinet.
The Keystone screen will be displayed on the screen.
• Press the KEYSTONE button when using the remote control.
• See page for PINCUSHION.
• See page for CORNERSTONE.
• See page for RESET.
Projected area
2. Press the ▼ button to select [KEYSTONE VERTICAL] and then
Screen frame
use the ◀ or ▶ so that the left and right sides of the projected
image are parallel.
*
Adjust the vertical keystone distortion.
3. Align the left (or right) side of the screen with the left (or right)
side of the projected image.
• Use the shorter side of the projected image as the base.
• In the right example, use the left side as the base.
Align left side
22
2. Projecting an Image (Basic Operation)
4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then
use the ◀ or ▶ so that the top and bottom sides of the projected
image are parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distortion.
6. After completing Keystone correction, press the EXIT button.
The Keystone screen will disappear.
• To perform Keystone correction again, press the ▼ button to display
the Keystone screen and repeat above steps 1 to 6.
To return the keystone adjustments to default:
1. Press the ▼ button to select [RESET] and press the ENTER button.
2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.
The adjustments will be reset.
All the adjustments for all the five items will be reset at the same time.
• The KEYSTONE feature can cause an image to be slightly blurred because the correction is made electronically.
23
2. Projecting an Image (Basic Operation)
❼ Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer
for the firs time.
[Poor picture]
[Adjusted picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually.
❽ Turning Up or Down Volume
Sound level from the speaker or audio output can be adjusted.
Increase volume
Decrease volume
TIP:When no menus appear, the ◀ and ▶ buttons on the projector cabinet
work as a volume control.
NOTE:
• Volume control is not available with the ◀ or ▶ button when an image
is magnified by using the D-ZOOM (+) button or when the menu is
displayed.
• Volume control is not available with the ◀ or ▶ button when VIEWER
is used.
TIP: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP]
sound,from the menu,select [SETUP] → [OPTIONS (1)] → [BEEP] → [OFF].
24
2. Projecting an Image (Basic Operation)
❾ Turning off the Projector
To turn off the projector:
1. First, press the
(POWER) button on the projector
cabinet or the STANDBY button on the remote control.
The confirmation message will be displayed.
Power On
Standby
2. Secondly, press the ENTER button or press the
(POWER) or the STANDBY button again.
The light will turn off and the projector will go into standby
mode. When in standby mode, the POWER indicator will
blinking orange and the STATUS indicator will turn off when
[NORMAL] is selected for [STANDBY MODE].
Blinking orange
light
Steady blue light
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if
the AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
NOTE:
• While the power indicator is blinking blue in short cycles, the power cannot be turned off.
• Do not disconnect the AC power supply to the projector within 10 seconds after making adjustment or setting changes and closing the
menu. Doing so can cause loss of adjustments and settings.
❿ When Moving the Projector
Preparation: Make sure that the projector is turned off.
1.
2.
Unplug the power cord.
Disconnect any other cables.
•
Remove the USB memory if it is inserted into the projector.
25
3. Convenient Features
❶ Turning off the Image and Sound
Press the AV-MUTE button to turn off the image and sound for a short period of
time. Press again to restore the image and sound.
The projector’s power-saving function will work 10 seconds after the image is
turned off.
As a result, the light power will be reduced.
NOTE:
• Even though the image is turned off, the menu still remains on the screen.
• Sound from the AUDIO OUT jack (Stereo mini) can be turned off.
• Even when the power-saving function works, the light power may be restored to its original level
temporarily.
❷ Freezing a Picture
Press the FREEZE button to freeze a picture. Press again to resume motion.
NOTE: The image is frozen but the original video is still playing back.
• This feature can not be used when USB-A is selected as the input terminal.
26
3. Convenient Features
❸ Magnifying a Picture
You can enlarge the picture up to four times.
NOTE: The maximum magnification may be less than four times depending on the signal.
To do so:
1. Press the D-ZOOM (+) button to magnify the picture.
To move the magnified image, use the ▲,▼,◀ or ▶ button.
2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved.
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• The image will be magnified or demagnified at the center of the screen.
• Displaying the menu will cancel the current magnification.
27
3. Convenient Features
❹ Changing Eco Mode/Checking Energy-Saving Effect
Using Eco Mode [ECO MODE]
The ECO MODE (NORMAL and ECO) increases light life, while lowering power consumption and cutting down on
CO2 emissions.
Four brightness modes of the light can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.
[ECO MODE]
[OFF]
Description
Status of LIGHT indicator
The light brightness is 100%.
Steady Green
light
[AUTO ECO]
Light power consumption will be changed
between [100%] and [80%] automatically
according to picture level
NOTE: A bright gradation may be less visible depending on
the image.
[NORMAL]
[ECO]
Light power consumption: approx. 80% brightne-
ss.The light life will extend by lowering the light
power.
Light power consumption: approx. 50%
Blinking Green
light
brightness. The light life will extend longer than the
one on NORMAL mode by controlling power
appropriate for the light. The maximum power be-
comes equivalent to the power in NORMAL.
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control to display [ECO MODE] screen.
2. Press the ECO button again to select a mode you wish.
• Each time the ECO button is pressed, the choices will be changed:
OFF → AUTO ECO → NORMAL → ECO → OFF
TIP:
• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.
NOTE:
• The [ECO MODE] can be changed by using the menu.
Select [SETUP] → [GENERAL] → [LIGHT MODE] → [ECO MODE].
• The light hours used can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME].
• The projector is always in [NORMAL] for 10 seconds after the light is turned on. The light condition will not be affected even when
[ECO MODE] is changed.
• After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, [ECO MODE] will automatically
switch to [ECO]. The projector will return to its original setting once a signal is accepted.
• If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [NORMAL] mode to
protect the projector.When the projector is in [NORMAL] mode, the picture brightness decreases.When the projector comes back to normal
temperature, the [ECO MODE] returns to its original setting.
Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [NORMAL] mode because the internal temperature is too high.
28
3. Convenient Features
Checking Energy-Saving Effect [CARBON METER]
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE]
is set to [AUTO ECO], [NORMAL], or [ECO]. This feature is called as [CARBON METER].
There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON
SAVINGS] message shows the total amount of CO2 emission reduction from the time of shipment up to now. You
The [CARBON SAVINGS-SESSION] message shows the amount of CO2 emission reduction between the time of
changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS-
SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-off.
TIP:
• The formula as shown below is used to calculate the amount of CO2 emission reduction.
Amount of CO2 emission reduction = (Power consumption in OFF for ECO MODE − Power consumption in AUTO ECO/NORMAL/ECO for
ECO MODE) × CO2 conversion factor.* When the image is turned off with the AV-MUTE button, the amount of CO2 emmission reduction
will also increase.
* Calculation for amount of CO2 emission reduction is based on an OECD publication “CO2 Emissions from Fuel Combustion, 2008 Edition”.
• The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.
• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
29
3. Convenient Features
❺ Using 4-Point Corner to Correct Keystone Distortion
[CORNERSTONE]
Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top
or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular.
Before performing correction
The KEYSTONE correction has features, KEYSTONE (HORIZONTAL/VERTICAL), PINCUSHION, and CORNERSTONE.
If the value of either CONERSTONE or PINCUSHION has corrected, KEYSTONE HORIZONTAL and KEYSTONE
VERTICAL are disabled. In this case, RESET the corrected values and restart to correct distortion.
Cornerstone
1. Press the KEYSTONE button with no menu displayed.
The KEYSTONE screen will be displayed.
• Press the KEYSTONE button when using the remote control.
• See page for PINCUSHION.
2. Press the ▼ button to select [CORNERSTONE] and press the ENTER button.
The drawing shows the upper left icon ( ) is selected.
The CORNERSTONE screen will be displayed.
3. Project an image so that the screen is smaller than the area of the raster.
4. Pick up any one of the corners and align the corner of the image with a corner of the screen.
Projected image
The drawing shows the upper right corner.
30
3. Convenient Features
TIP:If either CORNERSTONE or PINCUSION is adjusted, the options KEYSTONEVERTICAL and KEYSTONE HORIZONTAL become unavailable.
In this case, RESET the corrected values and restart to correct distortion.
5. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected
image frame.
6. Press the ENTER button.
7. Use the ▲▼◀▶ button to move the projected image frame as shown on the example.
8. Press the ENTER button.
9. Use the ▲▼◀▶ button to select another icon which points in the direction.
On the Cornerstone adjustment screen, select [EXIT] or press the EXIT button on the remote control.
The confirmation screen is displayed.
10.Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).
Selecting [RESET] will return to the factory default.
Selecting [UNDO] will exit without saving changes.
31
3. Convenient Features
Pincushion
By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion
distortion.
1. Press the KEYSTONE button with no menu displayed.
The KEYSTONE screen will be displayed.
• Press the KEYSTONE button when using the remote control.
2. Press the ▼ or ▲ button to select [PINCUSHION LEFT/RIGHT]
or [PINCUSHION TOP/BOTTOM].
3. Press the ◀ or ▶ button to correct distortion.
NOTE:
• The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM] item is not
available when [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL] or [COR-
NERSTONE] is activated.
• Before performing correction, set the lens shift to the center position.
4. Press the EXIT when PINCUSHION adjustment is completed.
NOTE:
• Even when the projector is turned on, the last used correction values are applied.
• [PINCUSHION] and [CORNERSTONE] corrections can cause the image to be slightly blurred because the correction is made electronically.
32
3. Convenient Features
Reset the keystone and pincushion adjustment to the default value
1. Press the KEYSTONE button with no menu displayed.
ON the displayed KEYSTONE menu, set the cursor at RESET using the ▼ button and press ENTER button.
• Confirmation message is displayed on.
2. Move the cursor onto YES using either ◀ or ▶ button and then press the ENTER.
NOTE:
• All adjusted values set in the KEYSTONE adjustment are reset to initial values.
TIP:
Adjustable range of the KEYSTONE and the CORNERSTONE:
Horizontal Direction
Vertical Direction
CORNERSTONE
KEYSTONE
Approx. ±10° (Max)
Approx. ±10° (Max)
Adjustable range may be narrower depending on input signal.
33
3. Convenient Features
❻
Preventing the Unauthorized Use of the Projector [SECURITY]
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a key-
word is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered,
the projector cannot project an image.
•
The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu.
To enable the Security function:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button twice to select [SETUP] and press the ▼ button or the ENTER button to select [GEN-
ERAL].
3. Press the ▶ button to select [INSTALLATION].
4. Press the ▼ button three times to select [SECURITY] and press the ENTER button.
The OFF/ON menu will be displayed.
5. Press the ▼ button to select [ON] and press the ENTER button.
The [SECURITY KEYWORD] screen will be displayed.
6. Type in a combination of the four ▲▼◀▶ buttons and press the ENTER button.
NOTE: A keyword must be 4 to 10 digits in length.
The [CONFIRM KEYWORD] screen will be displayed.
34
3. Convenient Features
7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button.
The confirmation screen will be displayed.
8. Select [YES] and press the ENTER button.
The SECURITY function has been enabled.
To turn on the projector when [SECURITY] is enabled:
1. Press the POWER button.
The projector will be turned on and display a message to the effect that the projector is locked.
2. Press the MENU button.
3. Type in the correct keyword and press the ENTER button. The projector will display an image.
NOTE: The security disable mode is maintained until the main power is turned off or unplugging the power cord.
35
3. Convenient Features
To disable the SECURITY function:
1. Press the MENU button.
The menu will be displayed.
2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button.
The OFF/ON menu will be displayed.
3. Select [OFF] and press the ENTER button.
The SECURITY KEYWORD screen will be displayed.
4. Type in your keyword and press the ENTER button.
When the correct keyword is entered, the SECURITY function will be disabled.
NOTE: If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your request code.
Your request code is displayed in the Keyword Confirmation screen. In this example [NB52-YGK8-2VD6-K585-JNE6-EYA8] is a request code.
36
3. Convenient Features
❼ Controlling the Projector by Using an HTTP Browser
Overview
The HTTP Server function provides settings and operations for:
1. Setting for wired network (NETWORK SETTINGS)
To use wired LAN connection, connect the projector to the computer with a commercially available
2. Setting Alert Mail (ALERT MAIL)
When the projector is connected to a wired network, light replace time or error messages will be sent via e-
mail.
3. Operating the projector
Power on/off, selecting input, volume control and picture adjustments are possible.
4. Setting PJLink PASSWORD and AMX BEACON
How to access to the HTTP server:
• Start the Web browser on the computer via the network connected to the projector and enter the following
URL :
http://<the projector’s IP address> /index.html
TIP: The factory setting IP address is [DHCP ON].
NOTE:
• To use the projector in a network, consult with your network administrator about network settings.
• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.
Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projector.
• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser
(or clear the cache).
• This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary
depending on the version of browser. Please refer to the help files and the other information provided in your software.
Preparation before Use
Connect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 93)
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and
the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually
been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser
may not be reflecte in operation. It is recommended that a proxy server not be used unless it is unavoidable.
37
3. Convenient Features
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or entered to the URL column when operation of the
projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address
of the projector has been registered to the domain name server by a network administrator, or the host name cor-
responding to the IP address of the projector has been set in the “HOSTS” fil of the computer being used.
Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the net-
work setting by specifying
http://pj.nec.co.jp/index.html
for the address or the entry column of the URL.
Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the network setting by
specifying
http://192.168.73.1/index.html
for the address or the entry column of the URL.
PROJECTOR ADJUSTMENT
POWER: This controls the power of the projector.
ON ���������������������������Power is switched on�
OFF��������������������������Power is switched off�
VOLUME: This controls the volume of the projector.
▲�����������������������������Increases the volume adjustment value�
▼�����������������������������Decreases the volume adjustment value�
AV-MUTE: This controls the mute function of the projector.
PICTURE ON �������������Mutes the video�
PICTURE OFF������������Cancels the video muting�
SOUND ON ���������������Mutes the audio�
SOUND OFF��������������Cancels the audio muting�
ALL ON���������������������Mutes each of the video, and audio functions�
ALL OFF �������������������Cancels the muting of each of the video, and audio functions�
38
3. Convenient Features
PICTURE: Controls the video adjustment of the projector.
CONTRAST ▲�����������Increases the contrast adjustment value�
CONTRAST ▼�����������Decreases the contrast adjustment value�
BRIGHTNESS ▲��������Increases the brightness adjustment value�
BRIGHTNESS ▼��������Decreases the brightness adjustment value�
SHARPNESS ▲���������Increases the sharpness adjustment value�
SHARPNESS ▼���������Decreases the sharpness adjustment value�
COLOR ▲�����������������Increases the color adjustment value�
COLOR ▼�����������������Decreases the color adjustment value�
HUE ▲ ���������������������Increases the hue adjustment value�
HUE ▼ ���������������������Decreases the hue adjustment value�
• The functions that can be controlled will vary depending on the signal being input to the projector. (→ page
59)
SOURCE SELECT: This switches the input terminal of the projector.
HDMI1����������������������Switches to the HDMI 1 IN terminal
HDMI2����������������������Switches to the HDMI 2 IN terminal�
COMPUTER ��������������Switches to the COMPUTER IN terminal�
VIDEO�����������������������Switches to the VIDEO IN terminal�
USB-A����������������������Switches to the data on the USB memory device�
LAN ....��������������.�������Switchestothe LAN terminal�
PROJECTOR STATUS: This displays the condition of the projector.
Displays how many hours the light(Y) has been used.
Displays how many hours the light(B) has been used.
Displays how many hours the filter has been used.
LIGHT( Y) HOURS USED ........
LIGHT( B) HOURS USED ........
FILTER HOURS USED ............
ERROR STATUS ���������������������Displays the status of errors occurring within the projector�
LOG OFF: Logging off your projector and returning to the authentication screen (LOGON screen).
39
3. Convenient Features
NETWORK SETTINGS
• SETTINGS
PIN
PIN TYPE
Select type of PIN code.
ONE-TIME
The PIN CODE is automatically created every time powering
ON the projector. Created PIN CODE is kept unchanged until
the projector is powered OFF.
STATIC
Enables to set up random number for the PIN CODE.
PIN CODE
For the case ONE-TIME is selected as PIN TYPE, automatically created PIN CODE
is displayed on (disabled to input).
For the case STATIC is selected as PIN TYPE, input random 4 digits number as PIN
CODE.
Select if you use the PIN CODE as a security password for connecting to the Multi-
Presenter application. For using the PIN code as a security password, add a check
mark into the square.
□ �������������������������� UTILIZE PIN CODE AS PASSWORD FOR CONNECTING WITH MultiPres-
enter�
APPLY
Make the settings for PIN effective.
40
3. Convenient Features
WIRED LAN
ENABLE
Turn on wired LAN connection
Turn off wired LAN connection
Set for wired LAN.
DISABLE
SETTING
DHCP ON
Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the
projector by your DHCP server.
DHCP OFF
Set IP ADDRESS, SUBNET MASK, and GATEWAY to the projector assigned by your
network administrator.
IP ADDRESS
SUBNET MASK
GATEWAY
Set your IP ADDRESS of the network connected to the projector.
Set your SUBNET MASK number of the network connected to the projector.
Set the default GATEWAY of the network connected to the projector.
AUTO DNS ON
DHCP server will automatically assign IP ADDRESS of DNS server connected to the
projector.
AUTO DNS OFF
APPLY
Set your IP ADDRESS of DNS server connected to the projector.
Make the settings for wired LAN effective.
• NAME
PROJECTOR NAME
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
HOST NAME
Enter the hostname of the network connected to the projector. A host name must be
16 or less.
• ALERT MAIL
ALERT MAIL (English
only)
This option will notify your computer of light replace time or error messages via e-mail
when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The light and filter are at the end of its usable life. Please replace the light and
filters.
Projector Name: NEC Projector
Light Hours Used: 100 [H]
SENDER’S ADDRESS
SMTP SERVER NAME
Enter sender’s address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient’s address. Up to three addresses can be entered.
RECIPIENT’S ADDRESS
1,2,3
TEST MAIL
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network settings
are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen,
check if the Recipient’s Address is correct.
SAVE
Click this button to save the above settings on the projector.
41
3. Convenient Features
• NETWORK SERVICE
PJLink PASSWORD
Set a password for PJLink*. A password must be 32 characters or less. Do not forget
your password. However, if you forget your password, consult with your dealer.
HTTP PASSWORD
AMX BEACON
Set a password for HTTP server. A password must be 10 characters or less.
Turn on or off for detection from AMX Device Discovery when connecting to the net-
work supported by AMX’s NetLinx control system.
TIP:
When using a device that supportsAMX Device Discovery, allAMX NetLinx control system will recognize
the device and download the appropriate Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device Discovery.
Clearing a checkmark will disable detecting the projector from AMX Device Discovery.
*What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard
protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
• INFORMATION
WIRED LAN
UPDATE
Display a list of settings of wired LAN connection.
Reflec settings when they are changed.
42
4. Using the Viewer
❶ What you can do with the Viewer
The Viewer has the following features.
•
When a commercially available USB memory that stores image file is inserted into the USB port (Type A) of the
projector, the Viewer allows you to view the image file on the USB memory.
Even if no computer is available, presentations can be conducted simply with the projector.
Supported graphic format is JPEG.
•
•
The Viewer displays the thumbnail screen (JPEG Exif only) on which you can jump to any specifi image you wish
to project.
•
There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be
changed in auto playback.
•
•
The order of displaying images can be set by name, date or size. Ascending or descending order can be selected.
Images can be rotated by 90 degrees during playback.
43
4. Using the Viewer
NOTE
• The USB port of the projector does not support USB hub.
• The following operations by using the buttons on the projector are not possible when the VIEWER screen such as the slide screen and the
thumbnail screen is displayed.
Buttons on the cabinet
- Keystone correction by using the ▲ / ▼ button
- Auto Adjustment by using the AUTO ADJ. button
- Volume control with the ◀ or ▶ button
To perform Keystone correction or Source selection during display of the Viewer, press the MENU button twice to display the menu and
operate Viewer from the menu.
Remote control
- Auto Adjustment button
- Freeze button
• Executing [RESET] → [ALL DATA] from the menu will return the settings for the Viewer toolbar to the factory default.
• USB memory
- Be sure to use a USB memory device formatted with the FAT32 or FAT16 file system.
The projector does not support NTFS formatted USB memory.
If the projector does not recognize your USB memory, check if the format is supported.
To format your USB memory in your computer, refer to the document or help file that comes with your Windows.
- We do not warrant that the USB port of the projector will support all USB memories in the market.
• Supported images
- Supported file format for Viewer are as follows.
We do not warrant all the images are supported for Viewer.
Images other than mentioned in the table may not be supported.
Image type
JPEG
Extension
JPG/JPEG
Description
Baseline/Exif are supported
- Image can be displayed at a resolution up to 10000 × 10000 pixels.
- Even if images are met by the above conditions, there may be some images which cannot be played back.
- More than 200 icons (total number of image file icons and folder icons) cannot be displayed in a thumbnail screen.
- Long file/folder name will be limited to the specified length. This can be shown by bracket added.
- If one folder has many files, it takes some time to play back.
• If a single folder contains too many files, switching images will take time. To shorten switching time, reduce the number of images con-
tained in a single folder.
TIP:
• Exchangeable image file format (Exif) is a standard image file format used by digital cameras with the addition of specific shooting data.
44
4. Using the Viewer
❷ Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar (→ page 49) is set to the factory de-
fault.
- Starting the Viewer ......................................................................below
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
Starting the Viewer
2. Insert the USB memory into the USB port of the projec-
tor.
• Do not remove the USB memory from the projector while
it’s LED flashes. Doing so may corrupt the data.
3. Press the SOURCE button on the projector cabinet.
The Viewer start screen will be displayed.
• Press the USB-A button on the remote control.
45
4. Using the Viewer
4. Press the ENTER button.
5. Use the ▲▼◀ or ▶ button to select an icon.
• The → (arrow) symbol on the right indicates there are more
pages. Pressing the PAGE ▽ (page down) button will show
the next page; pressing the PAGE △ (page up) will show
the previous page.
6. Press the ENTER button.
The selected slide will be displayed.
• When a folder icon is selected, icons contained in the folder
will be displayed.
7. Press the ▶ button to select the next slide.
The slide on the right will be displayed.
• The ◀ or ▶ button can be used to select the next (right)
slide or the previous (left) slide in the thumbnail screen.
Pressing the MENU button during display of the
thumbnail screen, the slide screen, or the slideshow
screen will display the toolbar. The toolbar is used to
•
8. Press the EXIT button when the toolbar is not displayed.
The thumbnail screen will be displayed.
• Another way to display the thumbnail screen is to press the
ENTER button.
• To close the toolbar, press the MENU button to return to
the SOURCE list, and press the MENU button again to close
the SOURCE list.
46
4. Using the Viewer
Removing the USB memory from the projector
1. Select the VIEWER start screen.
Press the EXIT button with no menu displayed.
2. Remove the USB memory from the projector.
Make sure that the LED on the USB memory is not flashing
before removing the USB memory.
NOTE: If you remove the USB memory from the projector with a slide
displayed, the projector may not operate correctly. If this happens, turn
off the projector and unplug the power cord.Wait 3 minutes, then connect
the power cord, and turn on the projector.
Exiting the Viewer
1. Press the MENU button with the slide screen or the
thumbnail screen displayed.
The control bar or the pop-up menu will be displayed.
2. Press the MENU button again.
The on-screen menu will be displayed.
3. Select a source other than [USB-A] and press the
ENTER button.
The Viewer will be exited.
TIP: To exit the Viewer using the remote control, select a source other
than [USB-A].
47
4. Using the Viewer
Parts of each screen
The Viewer has four screens.
(1) Viewer start screen
(3) Thumbnail screen
(6) (4)
(9) Slide screen/
(11) Slideshow screen
(5)
(7)
(2)
(8)
(10) (12)
Name
Description
(1) Viewer start screen
(2) USB icon
This screen will be displayed first when you select the Viewer.
This icon indicates that the USB memory is inserted into the projector.
(3) Thumbnail screen
This screen will show a list of folders and image files stored in the USB memory. The
JPEG Exif files will be displayed in thumbnail screen only.
• The maximum number of image files or folders within one page is 6 × 4 lateral by
longitudinal.
(4) Cursor
The cursor is used to select (highlight) the folder or image file by using ▲▼◀▶ button.
This icon is used to return to the upper (parent) folder.
(5) Back icon
(6) Folder icon
This icon shows that the USB memory has folders.
This icon shows further folders or image files are available in the next (previous) page.
Use the ▶ button to go to the next (previous) row. The PAGE ▽ or PAGE △ on the
remote control is used to go to the next or previous page directly.
(7) Page up (Page down)
icon
(8) Thumbnail toolbar
(9) Slide screen
This toolbar is used in the thumbnail screen. Pressing the MENU button will display
This screen is used for manual playback. The selected image will be displayed in full
screen.
(10) Slide toolbar
This toolbar is used in the slide screen. Pressing the MENU button will display this
(11) Slideshow screen
(12) Slideshow toolbar
This screen is used for auto playback. The slides will be changed automatically.
This toolbar is used in the slideshow screen. Pressing the MENU button will display
48
4. Using the Viewer
Using the toolbar
1. Press the MENU button.
The toolbar will be displayed.
The SOURCE screen will be displayed as Viewer connection screen.
2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option.
When the cursor is placed, the selected item will be changed to yellow.
The ▲ or ▼ shows more available choices.
3. Press the ENTER button.
The selected item will be displayed.
4. Press the MENU button two times.
The toolbar will be closed and the SOURCE list will be displayed. Press the MENU button again to close the
SOURCE list.
Thumbnail toolbar
(1)
(2)
(3)
(4)
Menu
Options
—
Description
(1) Back
Goes back to the previous image. When the cursor reaches the top left of
the screen, it will go to the previous page.
(2) Forward
(3) Display
—
Goes to the next image. When the cursor reaches the bottom right of the
screen, it will go to the next page.
Closes the menu and returns to the thumbnail screen.
Closes the menu and starts the slideshow from the highlighted item.
Closes the menu and displays the slide screen.
(4) Order
Displays the icons alphabetically by name. (number before alphabet)
Displays the icons in descending order of fil size.
Displays the icons in the order of creation date
49
4. Using the Viewer
Slide toolbar
(1)
(2)
(3)
(4)
Menu
Options
Description
(1) Display
Closes the menu and switches to the slide screen.
Closes the menu and displays the thumbnail screen.
Closes the menu and starts the slideshow from the highlighted item.
Closes the menu and displays the image in its actual size.
(2) Image dis-
play
Closes the menu and displays the image in the projector’s maximum
resolution.
(3) Clockwise
rotation
—
—
Close the menu and rotate the image 90° clockwise.
(4) Counter-
clockwise
rotation
Close the menu and rotate the image 90° counter clockwise.
Slideshow toolbar
(1)
(2)
(3)
(4)
(5)
Menu
Options
—
Description
(1) Stop
Closes the menu and changes to the slide screen.
(2) Back
—
—
Goes back to the previous image.
(3) Forward
(4) Interval
(5) Repeat
Goes to the next image.
Specifie interval time when playing back the slides.
Repeats to play back the images in the folder.
Returns to the thumbnail screen.
TIP:
• A picture icon at the center of the screen shows that the file cannot be displayed in the slide screen or thumbnail screen.
• Slide toolbar setting for rotation will be cancelled if the folder is moved from one place to another.
50
5. Using On-Screen Menu
❶ Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the
first tab.
4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust
or set.
You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjust the level or turn the selected item on or off by using the ▲▼◀▶ buttons on the remote control or
the projector cabinet.
Changes are stored until adjusted again.
7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the pro-
jector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8. Press the MENU button to close the menu.
To return to the previous menu, press the EXIT button.
51
5. Using On-Screen Menu
❷
Menu Elements
Tab
Slide bar
Solid triangle
Available buttons
Source
Highlight
Radio button
ECO mode symbol
Off Timer remaining
time
High Altitude symbol
Thermometer symbol
Key Lock symbol
Menu windows or dialog boxes typically have the following elements:
Highlight �������������������������������Indicates the selected menu or item�
Solid triangle�������������������������Indicates further choices are available� A highlighted triangle indicates the item is active�
Tab����������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�
Radio button��������������������������Use this round button to select an option in a dialog box�
Source ����������������������������������Indicates the currently selected source�
Off Timer remaining time�������Indicates the remaining countdown time when the [OFF TIMER] is preset�
Slide bar �������������������������������Indicates settings or the direction of adjustment�
ECO mode symbol�����������������Indicates ECO MODE is set�
Key Lock symbol�������������������Indicates the [CONTROL PANEL LOCK] is enabled�
Thermometer symbol������������Indicates the [ECO MODE] is forcibly set to [NORMAL] mode because the internal temperature is too high�
High Altitude symbol��������������Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode�
52
5. Using On-Screen Menu
❸ List of Menu Items
Some menu items are not available depending on the input source.
Menu Item
HDMI1
Default
Options
*
*
*
*
*
*
*
HDMI2
COMPUTER
VIDEO
SOURCE
USB-A
LAN
PRESET
1-7
GENERAL
REFERENCE
*
HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM
GAMMA CORRECTION
SCREEN SIZE
COLOR TEMPERATURE
DYNAMIC CONTRAST
IMAGE MODE
DYNAMIC, NATURAL, BLACK DETAIL
LARGE, MEDIUM, SMALL
5000, 6500, 7800, 8500, 9300, 10500
OFF, ON
*
*
*
*
*
STILL, MOVIE
OFF, ON
DETAIL SETTINGS COLOR ENHANCEMENT
WHITE BALANCE
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
CONTRAST
0
0
0
*
*
PICTURE
ADJUST
*
63
63
7
BRIGHTNESS
SHARPNESS
COLOR
HUE
31
31
RESET
CLOCK
PHASE
*
*
HORIZONTAL
VERTICAL
OVERSCAN
*
*
*
IMAGE OPTIONS
AUDIO
AUTO, 0[%], 5[%], 10[%]
ASPECT RATIO
VOLUME
DIGITAL ZOOM
KEYSTONE HORIZONTAL
KEYSTONE VERTICAL
AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVE
*
11
100
0
0-31
70-100
0
PINCUSHION LEFT/RIGHT
KEYSTONE
0
0
PINCUSHION TOP/BOTTOM
CORNERSTONE
RESET
0
OFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT
GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK
WALL COLOR
ECO MODE
OFF
AUTO ECO
100
OFF
OFF, AUTO ECO, NORMAL, ECO
16-100
OFF, ON
SETUP
GENERAL
ADJUST
LIGHT MODE
CONSTANT BRIGHTNESS
BALANCE
CLOSED CAPTION
OFF TIMER
0
OFF
OFF
-512 - 512
OFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4
OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語,
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMI,
LANGUAGE
ENGLISH
NORSK, TÜRKÇE, РУССКИЙ,
,Ελληνικά, 简体中文, 한국어, TIẾNG ViỆT,
, 繁體中文
ROMÂNĂ, HRVATSKI, БЪЛГАРСКИ, INDONESIA,
, ไทย,
*
The asterisk (*) indicates that the default setting varies depending on the signal.
53
5. Using On-Screen Menu
Menu Item
Default
COLOR
ON
Options
COLOR SELECT
SOURCE DISPLAY
ID DISPLAY
COLOR, MONOCHROME
OFF, ON
ON
OFF, ON
MENU
ECO MESSAGE
DISPLAY TIME
BACKGROUND
FILTER MESSAGE
OFF
OFF, ON
AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC
BLUE
BLUE, BLACK, LOGO
OFF, 100[H], 500[H], 1000[H], 2000[H]
2000[H]
DESKTOP
FRONT
ORIENTATION
DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT
CONTROL PANEL LOCK
SECURITY
OFF
OFF
OFF, ON
OFF, ON
INSTALLATION
COMMUNICATION SPEED
38400bps
1
4800bps, 9600bps, 19200bps, 38400bps
CONTROL ID NUMBER
CONTROL ID
1-254
CONTROL ID
OFF
OFF, ON
TEST PATTERN
AUTO ADJUST
NORMAL
OFF
OFF, NORMAL, FINE
OFF, ON
SEAMLESS SWITCHING
FAN MODE
AUTO
AUTO, HIGH, HIGH ALTITUDE
RGB/
COMPONENT
COMPUTER
RGB/COMPONENT, RGB, COMPONENT
SIGNAL SELECT
VIDEO
AUTO
ON
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
OPTIONS(1)
SETUP
WXGA MODEL
DEINTERLACE
OFF, ON
ON
OFF, ON
HDMI1
HDMI2
HDMI1
VIDEO LEVEL
VIDEO LEVEL
AUTO
AUTO
HDMI1
HDMI2
LAN
AUTO, NORMAL, ENHANCED
AUTO, NORMAL, ENHANCED
HDMI1, COMPUTER
HDMI2, COMPUTER
LAN, COMPUTER
OFF, ON
HDMI SETTINGS
AUDIO SELECT HDMI2
LAN
BEEP
ON
STANDBY MODE
DIRECT POWER ON
AUTO POWER ON
NORMAL
OFF
NORMAL, NETWORK STANDBY
OFF, ON
OFF
OFF, ON
STANDBY
(NORMAL):1:00
NETWORK
AUTO POWER OFF
OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00
LAST, AUTO, HDMI1, HDMI2, COMPUTER, VIDEO, USB-A, LAN
$, €, JP¥, RMB¥
OPTIONS(2)
STANDBY:0:15
DEFAULT SOURCE SELECT
CARBON CONVERT
CURRENCY
LAST
$
CURRENCY CONVERT
WIRED LAN
ENABLE
DISABLE, ENABLE
DHCP:ON
AUTO DNS:ON
WIRED LAN SETTINGS
RECONNECT
DHCP, IP ADDRESS, SUBNET MASK, GATEWAY, AUTO DNS, DNS
54
5. Using On-Screen Menu
Menu Item
Default
Options
LIGHT HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
TOTAL COST SAVINGS
SOURCE NAME
USAGE TIME
SOURCE INDEX
HORIZONTAL FREQUENCY
SOURCE(1) VERTICAL FREQUENCY
SYNC TYPE
SEPARATE SYNC、COMPOSITE SYNC、SYNC ON GREEN、SYNC ON VIDEO
SYNC POLARITY
SCAN TYPE
SIGNAL TYPE
VIDEO TYPE
SOURCE(2)
BIT DEPTH
8[bits]、10[bits]、12[bits]
VIDEO LEVEL
IP ADDRESS
INFO
SUBNET MASK
WIRED LAN
GATEWAY
MAC ADDRESS
PROJECTOR NAME
PIN CODE
CONNECTION
VERSION
IP ADDRESS
WIRED LAN
FIRMWARE
DATA
PROJECTOR NAME
HOST NAME
MODEL NO.
SERIAL NUMBER
OTHERS
CONTROL ID(when[CONTROL ID]is set)
CURRENT SIGNAL
RESET ALL DATA
CLEAR FILTER HOURS
55
5. Using On-Screen Menu
❹ Menu Descriptions & Functions [SOURCE]
HDMI1 and HDMI2
Selects the HDMI compatible equipment connected to your HDMI1 or 2 IN terminal.
COMPUTER
Selects the computer connected to your COMPUTER input terminal signal.
NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD player or document camera.
USB-A
This feature enables you to make presentations using a USB memory that contains slides.
LAN
Selects a signal from the LAN port (RJ-45).
56
5. Using On-Screen Menu
❺ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set
user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 7].
HIGH-BRIGHT �����������Recommended for use in a brightly lit room�
PRESENTATION���������Recommended for making a presentation using a PowerPoint fil �
VIDEO�����������������������Recommended for typical TV program viewing�
MOVIE����������������������Recommended for movies�
GRAPHIC ������������������Recommended for graphics�
sRGB������������������������Standard color values
DICOM SIM���������������Recommended for DICOM simulation format�
NOTE:
• The [DICOM SIM.] option is for training/reference only and should not be used for actual diagnosis.
• DICOM stands for Digital Imaging and Communications in Medicine. It is a standard developed by the American College of Radiology (ACR)
and the National Electrical Manufacturers Association (NEMA).
The standard specifies how digital image data can be moved from system to system.
[DETAIL SETTINGS]
57
5. Using On-Screen Menu
[GENERAL]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT �����������Recommended for use in a brightly lit room�
PRESENTATION���������Recommended for making a presentation using a PowerPoint fil �
VIDEO�����������������������Recommended for typical TV program viewing�
MOVIE����������������������Recommended for movies�
GRAPHIC ������������������Recommended for graphics�
sRGB������������������������Standard color values�
DICOM SIM���������������Recommended for DICOM simulation format�
Selecting Gamma Correction Mode [GAMMA CORRECTION]
Each mode is recommended for:
DYNAMIC �����������������Creates a high-contrast picture�
NATURAL������������������Natural reproduction of the picture�
BLACK DETAIL����������Emphasizes detail in dark areas of the picture�
NOTE: This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Selecting Screen Size for DICOM SIM [SCREEN SIZE]
This function will perform gamma correction appropriate for the screen size.
LARGE����������������������For screen size of 110"
MEDIUM�������������������For screen size of 90"
SMALL ���������������������For screen size of 70"
NOTE: This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
This function allows you to adjust the contrast ratio optically using the built-in iris.
To increase the contrast ratio, select [ON].
Selecting Still Image Mode or Movie Mode [IMAGE MODE]
This function allows you to select the still image mode or the movie mode.
STILL �����������������������This mode is for a still image�
MOVIE����������������������This mode is for a movie�
NOTE: This function is available only when [HIGH-BRIGHT] is selected for [REFERENCE].
58
5. Using On-Screen Menu
Enhancing the Color [COLOR ENHANCEMENT]
This function allows you to enhance the color of image.
ON ���������������������������Enhances the color�
NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE].
Adjusting White Balance [WHITE BALANCE]
This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen;
Brightness for each color (RGB) is used to adjust the black level of the screen.
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as reference.
Input signal
COMPUTER/HDMI (RGB)
COMPUTER/HDMI (COMPONENT)
CONTRAST
Yes
BRIGHTNESS
SHARPNESS
COLOR
No
HUE
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
VIDEO
USB-A
LAN
No
No
Yes = Adjustable, No = Not adjustable
[RESET]
The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the follow-
ing; Preset numbers and [REFERENCE] within the [PRESET] screen.
The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected
will not be reset.
59
5. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK ���������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function
adjusts the clock frequencies that eliminate the horizontal banding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE����������������������Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk� (This is evident when
part of your image appears to be shimmering�)
Use [PHASE] only after the [CLOCK] is complete�
60
5. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the cur-
rent signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its
adjustments will be called up and applied.
To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL
DATA] and reset the adjustments.
Selecting Overscan Percentage [OVERSCAN]
Select overscan percentage (AUTO, 0%, 5% and 10%) for signal.
Projected image
Overscaned by 10%
NOTE:
• The [0[%]] cannot be selected when VIDEO signal is used.
• The [OVERSCAN] item is not available:
- when [NATIVE] is selected for [ASPECT RATIO].
61
5. Using On-Screen Menu
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
•
This table shows typical resolutions and aspect ratios that most computers support.
Resolution
640 × 480
Aspect Ratio
4:3
VGA
SVGA
XGA
800 × 600
1024 × 768
1280 × 768
1280 × 800
1440 × 900
1280 × 1024
1400 × 1050
1600 × 1200
1920 × 1200
4:3
4:3
WXGA
WXGA
WXGA+
SXGA
SXGA+
UXGA
WUXGA
15:9
16:10
16:10
5:4
4:3
4:3
16:10
Options
Function
AUTO
The projector will automatically determine the incoming signal and display it in its aspect
The projector may erroneously determine the aspect ratio depending on its signal. If
this occurs, select the appropriate aspect ratio from the following.
4:3
The image is displayed in 4:3 aspect ratio.
The image is displayed in 16:9 aspect ratio.
The image is displayed in 15:9 aspect ratio.
The image is displayed in 16:10 aspect ratio.
16:9
15:9
16:10
LETTERBOX
The image of a letterbox signal is stretched equally in the horizontal and vertical direc-
tions to fi the screen. Parts of the displayed image are cropped at the top and bottom
edges and therefore not visible.
NATIVE
The projector displays the current image in its true resolution when the incoming com-
puter signal has a lower resolution than the projector’s native resolution.
[Example] When the incoming
signal with the resolution of 800
× 600 is displayed:
NOTE:
• When a non-computer signal is displayed, the [NATIVE] is not available.
• When a signal with a higher resolution than the projector’s native resolution is displayed, [NATIVE] is
not available.
62
5. Using On-Screen Menu
Sample image when the appropriate aspect ratio is automatically determined
[Computer signal]
Aspect ratio of incoming signal
4:3
5:4
16:9
15:9
16:10
Sample image when the appro-
priate aspect ratio is automati-
cally determined
[Video signal]
Aspect ratio of incoming signal
4:3
Letterbox
Squeeze
Sample image when the aspect
ratio is automatically determined
NOTE: To display a letterbox signal properly, NOTE: To display a squeezed signal properly,
select [LETTERBOX]. select [16:9].
TIP:
• Image position can be adjusted vertically using [POSITION] when the [16:9], [15:9], or [16:10] aspect ratios are selected.
• The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspect ratio for a
video source.
The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie film.
• The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3.
63
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[GENERAL]
Using Digital Zoom [DIGITAL ZOOM]
This feature allows you to electronically fine adjust the image size on the screen.
NOTE:
• This feature can not be used when USB-A, LAN is selected as a input terminal.
TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the
→
[DIGITAL ZOOM] function. ( page 20)
Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion
manually.
NOTE:
• [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once.
• To change from one item to another item, reset the first item.
• Adjustment values will be overwritten. They will not be deleted even when the projector is turned off.
• Using [KEYSTONE], [PINCUSHION] and [CORNERSTONE] correction can cause the image to be slightly blurred because the correction is
made electronically.
PINCUSHION LEFT/RIGHT ��������������Corrects pincushion distortion at the left or right side� (→ page 32)
PINCUSHION TOP/BOTTOM �����������Corrects pincushion distortion at the top or bottom side� (→ page 32)
CORNERSTONE ����������������������������Fits a projected image within the border of the screen easily by align the four corner of an image to
the ones of the screen� (→ page 30)
RESET������������������������������������������Returns all the above items to the factory preset values�
TIP:
• The maximum adjustment range with [CORNERSTONE] and [KEYSTONE] corrections is ±10° in the horizontal direction, ±10° in the vertical
direction.
- Depending on input signal, the adjustable range may be narrower.
65
5. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
NOTE: Selecting [WHITEBOARD] reduces light brightness.
[LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy sav-
ings settings, see page 28 “4 Changing Eco Mode/Checking Energy-Saving Effect”.
ECO MODE
OFF
The light module luminance (brightness) will be at the setup brightness for [ADJUST].
AUTO ECO
NORMAL
ECO
By controlling the brightness and fan speed according to the selected setting, energy can
be saved and motion noise and the power consumption can be lowered.
These options can be selected when [CONSTANT BRIGHTNESS] mode is set to [OFF].
ADJUST
Brightness can be adjusted in 1% increments from 16 to 100%.
When several projectors are used for multi-screen projection, the brightness can be ad-
justed individually on each projector.
The adjustment is valid when [ECO MODE] is set to [OFF] and [CONSTANT BRIGHT-
NESS] is set to [OFF].
CONSTANT
BRIGHTNESS
OFF
ON
[CONSTANT BRIGHTNESS] mode will be canceled.
Maintains 66% brightness of the factory default setting.
NOTE:
•
[CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a constant level.
Color will not be fixed.
BALANCE
Color balance can be adjusted in increments of 1 from -512 to 512.
When the screen color is yellow, adjust to the right; when the screen color is blue, adjust to
the left.
TIP:
• Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the projector automatically adjust
the output based on the projector used time, thereby maintaining a constant brightness throughout the life of the light module.
However, if output is already at its maximum, brightness will decrease with use.
66
5. Using On-Screen Menu
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video.
OFF��������������������������This exits the closed caption mode�
CAPTION 1-4������������Text is superimposed�
TEXT 1-4������������������Text is displayed�
NOTE:
• The closed caption is not available under the following conditions:
- when messages or menus are displayed.
- when an image is magnified, frozen, or muted.
• Portions of superimposed text or closed caption may be truncated. If that happens, try to place the superimposed text or closed caption
within the screen.
Using Off Timer [OFF TIMER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3 MINUTES]
message will be displayed on the bottom of the screen.
Selecting Menu Language [LANGUAGE]
You can choose one of 30 languages for on-screen instructions.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
67
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, USB-A, to be
displayed on the top right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an available input will be dis-
played. When the [USB-A] item is selected for [SOURCE], the no-signal guidance will not be displayed.
Turning ON/OFF Control ID [ID DISPLAY]
This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the
factory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE].
NOTE:
• When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed at the center
of the screen regardless of its selection.
• Your setting will not be affected even when [RESET] is done from the menu.
Selecting Interval Time for Filter Message [FILTER MESSAGE]
This option allows you to select the time preference between displaying the message for cleaning the filters. Clean
Five options are available:
OFF, 100[H], 500[H], 1000[H], 2000[H]
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
68
5. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projec-
tion, desktop rear projection, and ceiling front projection.
DESKTOP FRONT
CEILING REAR
DESKTOP REAR
CEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control functions.
• When the control panel is locked, pressing and holding the SOURCE button on the projector cabinet for about 10 seconds will change the
setting to [OFF].
TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [
] will be displayed at the bottom right of the menu.
Enabling Security [SECURITY]
This feature turns on or off the SECURITY function.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
69
5. Using On-Screen Menu
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps.
The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the
equipment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CON-
TROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors
together using the single remote control. To do so, you have to assign an ID number to each projector.
CONTROL ID NUMBER�����������Select a number from 1 to 254 you wish to assign to your projector�
CONTROL ID��������������������������Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID setting�
NOTE:
• When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL
ID function. (In this case the buttons on the projector cabinet can be used.)
• Your setting will not be affected even when [RESET] is done from the menu.
• Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control ID.
Assigning or Changing the Control ID
1. Turn on the projector.
2. Press the ID SET button on the remote control.
+
The CONTROL ID screen will be displayed.
If the projector can be operated with the current remote control ID, the [ACTIVE] will
be displayed. If the projector cannot be operated with the current remote control
ID, the [INACTIVE] will be displayed. To operate the inactive projector, assign the
control ID used for the projector by using the following procedure (Step 3).
3. Press one of numeric keypad buttons while pressing and holding the ID SET
button on the remote control.
Example:
To assign “3”, press the “3” button on the remote control.
No ID means that all the projectors can be operated together with a single remote
control. To set “No ID”, enter “000” or press the CLEAR button.
TIP: The range of IDs is from 1 to 254.
4. Release the ID SET button.
The updated CONTROL ID screen will be displayed.
NOTE:
• The IDs can be cleared in a few days after the batteries are run down or removed.
• Accidentally pressing any one of the buttons of the remote control will clear currently specified ID
with batteries removed.
70
5. Using On-Screen Menu
Using Test Pattern [TEST PATTERN]
Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to
display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and
corrections for keystone, cornerstone and pincushion are not available when the test pattern is displayed.
[OPTIONS(1)]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF��������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal�
NORMAL ������������������Default setting� The computer signal will be automatically adjusted� Normally select this option�
FINE�������������������������Select this option if fine adjustment is needed� It takes more time to switch to the source than when [NORMAL]is
selected�
[SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to the new image
without a break due to absence of a signal.
Selecting Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO �����������������������The built-in fans automatically run at a variable speed according to the internal temperature�
HIGH ������������������������The built-in fans run at high speed�
HIGH ALTITUDE���������The built-in fans run at a high speed� Select this option when using the projector at altitudes approximately 5500
feet/1700 meters or higher�
When you wish to cool down the temperature inside the projector quickly, select [HIGH].
NOTE:
• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or higher.
• Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE] can cause the projector
to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
• Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical components such as the
light.
• Your setting will not be affected even when [RESET] is done from the menu.
TIP:
• When [HIGH ALTITUDE] is selected, an icon [
] is displayed at the bottom of the on-screen menu.
71
5. Using On-Screen Menu
Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allows you to choose [COMPUTER] for an RGB source such as a computer, or [COMPONENT] for a component
video source such as a DVD player. Normally select [RGB/COMPONENT] and the projector automatically detects a
component signal. However there may be some component signals that the projector is unable to detect. If this is
the case, select [COMPONENT].
[VIDEO]
This feature enables you to select composite video standards automatically or manually.
Factory default setting is [AUTO] and the projector will automatically detect the video standard.
In the case where the projector has difficult detecting the video standard, select the appropriate video standard
from the menu.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 800)/WUXGA (1920 × 1200) signals in recognizing an input signal.
NOTE: [ON] is selected at the time of shipment.
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF��������������������������Select this option if there is any jitter or artifacts in video�
ON ���������������������������Default standard setting�
NOTE: This feature is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2 [HDMI SETTINGS]
Make the settings for each video level when connecting HDMI1 equipment such as a DVD player.
VIDEO LEVEL ������������Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NORMAL] to
disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and
increase detail in the dark areas�
Setting Audio [AUDIO SELECT]
Make the settings for each audio level when connecting HDMI equipment. Select between each equipment and
computer.
HDMI1, HDMI2��������������Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER] to switch
the COMPUTER input audio signal�
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or STANDBY button
TIP:
• Volume control for [BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP function, set
[BEEP] to [OFF].
72
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
The projector has two standby modes: [NORMAL] and [NETWORK STANDBY].
The NORMAL mode is the mode that allows you to put the projector in the power-saving condition which consumes
less power than the NETWORK STANDBY mode.
NORMAL �������������������������������When [NORMAL] is selected, only the following buttons and feature will work:
POWER buttons on the projector cabinet and the remote control, AUTO POWER ON, and powering on from
PC Control command�
NETWORK STANDBY��������������When [NETWORK STANDBY] is selected, the projector can be turned on over a wired LAN connection and
only the following buttons, port, and features will work:
POWER buttons on the projector cabinet and the remote control, powering on from PC Control command,
AUTO POWER ON, operation by User Supportware, LAN feature, and Mail Alert feature.
IMPORTANT:
• When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes, [STANDBY
MODE] will transit into [NORMAL] automticially for the purpose to save the consumption power.
• When [NETWORK STANDBY] has been selected, [AUTO POWER OFF] becomes ineffective (displayed in grey) and [0:15] is selected auto-
matically.
In the below conditions, setting of the [STANDBY MODE] is disabled and the projector will go into the SLEEP mode*.
* Sleep mode refers the mode without functional restrictions by the [STANDBY MODE].
•
When [STANDBY MODE] → [NETWORK STANDBY] is selected
- When [NETWORK SERVICE] → [AMX SETTINGS] → [ENABLE] is selected
- When the signal is input to the computer, HDMI 1 IN or HDMI 2 IN terminals
NOTE:
• Even when [NORMAL] is selected for [STANDBY MODE], power on or off can be done by using the PC CONTROL port.
• The power consumption in the standby mode will not be included in calculating CO2 emission reduction.
• Your setting for [STANDBY MODE] will not be affected even when [RESET] is done from the menu.
Enabling Direct Power On [DIRECT POWER ON]
Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the
need to always use the POWER button on the remote control or projector cabinet.
73
5. Using On-Screen Menu
Turning On the Projector By Applying Computer Signal [AUTO POWER ON]
When the projector is in Standby mode, applying a computer or HDMI signal from a computer connected to the
COMPUTER IN input, HDMI1, or HDMI2 input will power on the projector and simultaneously project the image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
To use this function, firs connect a computer to the projector and the projector to an active AC input.
NOTE:
• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in combination
of the AUTO POWER OFF function.
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN terminal
- when a Sync on Green RGB signal or composite sync signal is applied
• To enable the AUTO POWER ON after turning off the projector, wait 5 seconds and input a computer or HDMI signal.
If a computer or HDMI signal is still present when the projector is turned off, the AUTO POWER ON will not work and the projector remains
in standby mode.
• Depending on the projector in use, theAUTO POWER ON may not work properly. In this case, set [STANDBY MODE] to [NETWORK STANDBY].
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 0:05, 0:10,
0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation is performed.
Selecting Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST������������������������Sets the projector to default to the previous or last active input each time the projector is turned on�
AUTO �����������������������Searches for an active source in order of HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → LAN →
HDMI1 and displays the first found sourc �
HDMI1����������������������Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on�
HDMI2����������������������Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on�
COMPUTER ��������������Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on�
VIDEO�����������������������Displays the Video source from the VIDEO IN terminal every time the projector is turned on�
USB-A����������������������Displays slides or plays back movie files from the USB memo y device every time the projector is turned on�
LAN........................ Displays a signal from LAN port (RJ-45).
Setting carbon footprint factor [CARBON CONVERT]
Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kg-CO2/kWh] based
on the CO2 Emissions from Fuel Combustion (2008 Edition) published by OECD.
Selecting your currency [CURRENCY]
Displays electricity pricing (available in 4 currency units).
$������������������������������US Dollar
€�����������������������������EU Euro
JP¥ ��������������������������Japanese Yen
RMB¥�����������������������Chinese Yuan
74
5. Using On-Screen Menu
Changing currency setting and currency convert setting [CURRENCY CONVERT]
Changes currency setting and currency convert setting for CARBON METER.
The initial setting are as follows:
US Dollar������������������0�11 [$/kWh]
EU Euro��������������������0�19 [€/kWh]
Japanese Yen�����������20 [¥/kWh]
Chinese Yuan �����������0�48 [¥/kWh]
The initial settings for US dollar, EU Euro, and Japanese Yen are based on “Energy Prices and Taxes (second quarter
2010” published by OECD.
The initial setting for Chinese Yuan is based on “Chinese Data File (2010)” published by JETRO.
75
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN]
[SETTINGS]
[DISABLE]
[ENABLE]
[DHCP]
Wired LAN connection will be turned off.
Wired LAN connection will be turned on.
ON��������������������������� IP address, subnet mask, and gateway will be
automatically assigned to the projector from
your DHCP server�
OFF�������������������������� Specify IP address, subnet mask, and gateway
assigned by your network administrator�
[IP ADDRESS]
[SUBNET MASK]
[GATEWAY]
Set your IP address of the network connected to the
projector.
Set your subnet mask number of the network connected
to the projector.
Set the default gateway of the network connected to the
projector.
[AUTO DNS]
ON��������������������������� DHCP server will automatically assign IP address
of DNS server connected to the projector�
OFF�������������������������� Set your IP address of DNS server connected
to the projector�
[RECONNECT]
Retry to connect the projector to a network.
76
5. Using On-Screen Menu
❼ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light usage. This item has seven pages. The information included is
as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
[TOTAL COST SAVINGS]
•
[TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving
[SOURCE(1)]
[SOURCE NAME]
[HORIZONTAL FREQUENCY]
[SYNC TYPE]
[SOURCE INDEX]
[VERTICAL FREQUENCY]
[SYNC POLARITY]
[SCAN TYPE]
77
5. Using On-Screen Menu
❽ Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-
PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the signals to the factory preset.
All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [ORIENTATION], [FILTER MESSAGE], [SECU-
RITY], [COMMUNICATION SPEED], [CONTROL ID], [STANDBY MODE], [FAN MODE], [CARBON CONVERT],
[CURRENCY], [CURRENCY CONVERT], [LIGHT HOURS USED], [FILTER HOURS USED], [TOTAL CARBON
SAVINGS], and [WIRED LAN].
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation Select [YES] and
press the ENTER button.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
80
6. Installation and Connections
1 Setting Up the Screen and the Projector
Thefurtheryourprojectorisfromthescreenorwall,thelargertheimage.Theminimumsizetheimagecanbeis
70"(1778mm)measureddiagonallywhentheprojectoris3.2inches(80mm)betweenthescreensideoftheprojector
andthewallorscreen.Thelargesttheimagecanbeis130"(3302mm)whentheprojectoris16.9inches(429mm)
betweenthescreensideoftheprojectorandthewallorscreen.
Tables of screen sizes and dimensions
Screen Size
Width
L1
L2
H1
H2
Diagonal
Height
Wide
inch
inch
mm
inch
mm
inch
mm
942
inch
12.0
mm
305
335
366
397
428
458
489
inch
49.1
55.6
62.1
68.6
75.1
81.7
88.2
mm
inch
3.2
5.4
7.7
mm
80
mm
410
468
527
585
643
701
759
70
80
90
1778 59.4
2032 67.8
2286 76.3
1508 37.1
1723 42.4
1939 47.7
2154 53.0
2369 58.3
1247
1412
1578
1743 10.0
1909 12.3
2074 14.6
2239 16.9
16.2
18.4
20.7
23.0
25.3
27.6
29.9
1077 13.2
1212 14.4
1346 15.6
1481 16.8
1615 18.1
1750 19.3
138
197
255
313
371
429
100 2540 84.8
110 2794 93.3
120 3048 101.8 2585 63.6
130 3302 110.2 2800 68.9
NOTE: The above values are design values and may vary.
Screen size (diagonal)
Screen width
140
130
120
110
100
90
Center of Screen
H2
L1
L2
H1
80
L1
70
L2
0
20
80
40
60
Projector bottom
Screen side of projector
Center of projection window
Throw distance L1/L2(cm)
81
6. Installation and Connections
WARNING
Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more
information.
•
•
•
Do not attempt to install the projector yourself.
Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the
projector severely damaged.
Do not use the projector where temperatures vary greatly. The projector must be used at temperatures
between 41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C).
•
Do not expose the projector to moisture, dust, or smoke.This will harm the screen image.
Ensure that you have adequate ventilation around yourprojectorsoheatcandissipate.Donotcoverthe vents on
•
•
the side or the front of the projector.
82
6. Installation and Connections
Example of installation on a desktop
The diagram below shows an example of when the projector is used on a desktop.
Horizontal projection position: Equal distance to the left and right from the center of the lens
Vertical projection position: (see table below)
Center of screen
H
L
Projector bottom
(Note) Height from lens center to lower edge of screen (with tilt feet screwed in)
Height(H)
Max
Throw distance(L)
Wide Tele
mm inch
Screen size
(inch)
Min
0V
inch
10.9
11.9
13.0
14.0
15.1
16.1
17.2
mm
276
303
330
357
383
410
437
inch
mm
333
368
402
437
472
507
542
inch
12.0
13.2
14.4
15.6
16.8
18.1
19.3
mm
305
335
366
397
428
458
489
inch
16.2
18.4
20.7
23.0
25.3
27.6
29.9
mm
432
493
554
615
676
738
799
70
80
90
100
110
120
130
13.1
14.5
15.8
17.2
18.6
20.0
21.3
410
468
527
585
643
701
759
17.0
19.4
21.8
24.2
26.6
29.0
31.4
83
6. Installation and Connections
Lens shifting range
This projector is equipped with a lens shift function (→ page 16) for adjusting the image position using dials. Lens
shifting is possible within the range shown below.
NOTE:
• In case lens shifted volume exceeds the below illustrated range, blur and shade may appear around ends of projected image.
Legend: V “Vertical” refers to the screen height and H “Horizontal” refers to the screen width. The lens shift range
is expressed as a ratio of height and width, respectively.
Lens shifting range:
Vertical direction: ±3%
Horizontal direction: ±2%
Width of projected image
100% H
3%V
100% V
Height of projected image
3%V
2%H
2%H
Width of projected image
100% H
3%V
100% V
Height of projected image
3%V
2%H
2%H
84
6. Installation and Connections
(Example) When using to project on a 100" screen
According to the “Tables of screen sizes and dimensions” (→ page 81), H = 84.8"/215.4 cm, V = 53.0"/134.6 cm.
Adjustment range in the vertical direction: the projected image can be moved upwards 0.03 × 53"/134.6 cm ≈
1.6"/4.06 cm (when the lens is at the center position).
Adjustment range in the horizontal direction: the projected image can be moved to the left or right 0.02 × 84.8"/
215.4 cm ≈ 1.7"/4.27 cm.
* Figures differ by several % because the calculation is approximate.
85
6. Installation and Connections
❷ Making Connections
Connecting Your Computer
Computer cables, HDMI can be used to connect to a computer. The connection cable is not enclosed with the projector.
Please get ready a suitable cable for the connection.
NOTE: Signals supported by Plug & Play (DDC2)
INPUT
HDMI 1 IN
digital
COMPUTER IN
analog
HDMI 2 IN
digital
Yes
Yes
Yes
HDMI cable (not supplied)
Use High Speed HDMI® Cable.
HDMI 1 IN
HDMI 2 IN
COMPUTER IN
AUDIO IN
NOTE: For Mac, use a commercially available pin adapter
(not supplied) to connect to your Mac’s video port.
Computer cable (VGA) (supplied)
To mini D-Sub 15-pin terminal on the
projector. It is recommended that you use
a commercially available distribution
amplifier if connecting a signal cable
longer than the cable supplied.
Stereo mini-plug audio cable (not supplied)
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
COMPUTER IN
HDMI 1 IN
SOURCE button on the projector cabinet
Button on the remote control
(COMPUTER 1)
(HDMI 1)
COMPUTER
HDMI1
HDMI 2 IN
HDMI2
(HDMI 2)
86
6. Installation and Connections
NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
NOTE: An image may not be displayed correctly when a Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
Enabling the computer’s external display
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC
laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.
Cautions when using a DVI signal
• When the computer has a DVI output terminal, use a commercially available converter cable to connect the com-
puter to the projector’s HDMI 1 or HDMI 2 input terminal (only digital video signals can be input).
HDMI 1 IN
HDMI 2 IN
AUDIO IN
NOTE: When Viewing a DVI Digital Signal
• Turn off the power of the computer and projector before connecting.
• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and rewinding.
• Use a DVI-to-HDMI cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 standard.
The cable should be within 197"/5 m long.
• Turn off the projector and the PC before connecting the DVI-to-HDMI cable.
• To project a DVI digital signal: Connect the cables, turn the projector on, then select the HDMI input. Finally, turn on your PC.
Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart
your PC.
• Do not disconnect the DVI-to-HDMI cable while the projector is running. If the signal cable has been disconnected and then reconnected,
an image may not be correctly displayed. Should this happen, restart your PC.
• The COMPUTER video input terminals support Windows Plug and Play.
• A Mac signal adapter (commercially available) may be required to connect a Mac computer.
87
6. Installation and Connections
Connecting an External Monitor
COMPUTER OUT
AUDIO OUT
Computer cable (VGA) (not supplied)
Computer cable (VGA) (supplied)
Stereo mini-plug audio cable (not supplied)
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer
analog image you’re projecting.
NOTE:
• The AUDIO OUT jack does not support headphone terminal.
• When audio equipment is connected, the projector speaker is disabled.
• The signal output from the COMPUTER OUT of this projector is for projecting image on exclusive one display.
• When no signal is applied over 3 minutes in the condition of projector standby when NETWORK STANDBY is set in the Standby mode,
output from the COMPUTER OUT or AUDIO OUT terminal will be stopped. In this case pull out the computer cable and set it back after
inputting video signal
Monitor out and sleep mode:
• The COMPUTER OUT terminal will not work when [NORMAL] is selected for [STANDBY MODE].
The COMPUTER OUT terminal will work only in the sleep mode.
Applying a signal from the COMPUTER IN terminal will put the projector in the sleep mode, which allows you to use the COMPUTER OUT
terminal and the AUDIO OUT mini jack.
The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu.
• In the network standby mode, sound for the last viewed computer or video source will be heard.
BNC-to- COMPUTER IN terminal converted signal will not be output in the standby mode and sleep mode.
88
6. Installation and Connections
Connecting Your DVD Player or Other AV Equipment
Connecting Video Input
VIDEO IN
AUDIO IN
Audio cable (not supplied)
Video cable
(not supplied)
Audio equipment
Audio cable (not supplied)
• Select the source name for its appropriate input terminal after turning on the projector.
SOURCE button on the projector
Input terminal
VIDEO IN
Button on the remote control
(VIDEO)
cabinet
VIDEO
NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.
NOTE: An image may not be displayed correctly when a Video source is played back in fast-forward or fast-rewind via a scan converter.
89
6. Installation and Connections
Connecting Component Input
COMPUTER IN
AUDIO IN
15-pin - to - RCA (female) × 3 cable adapter
(ADP-CV1E)
Stereo mini plug - to - RCA audio cable (not supplied)
Audio Equipment
Component video RCA ×
3 cable (not supplied)
DVD player
Audio cable (not supplied)
A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] →
[SIGNAL SELECT] → [COMPUTER], and then place a check mark in the Component radio button.
• Select the source name for its appropriate input terminal after turning on the projector.
SOURCE button on the projector
Input terminal
Button on the remote control
(COMPUTER 1)
cabinet
COMPUTER IN
COMPUTER
NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.
90
6. Installation and Connections
Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the
HDMI IN terminal of your projector.
HDMI 1 IN
HDMI 2 IN
HDMI cable (not supplied)
Use High Speed HDMI® Cable.
Audio cable (not supplied)
•
Select the source name for its appropriate input terminal after turning on the projector.
SOURCE button on the projector
Input terminal
Button on the remote control
cabinet
HDMI1
HDMI2
HDMI 1 IN
HDMI 2 IN
(HDMI1)
(HDMI2)
•
•
When connecting the HDMI1 IN terminal (or HDMI2 terminal) of the projector to the DVD player, the projector’s
video level can be made settings in accordance with the DVD player’s video level. In the menu select [HDMI
SETTINGS] → [VIDEO LEVEL] and make necessary settings.
If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [ HDMI1] or [HDMI2].
91
6. Installation and Connections
Connecting to a Wired LAN
The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable.
To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] →[WIRED LAN].
Example of LAN connection
Server
Hub
LAN cable (not supplied)
NOTE: Use a Category 5 or higher LAN
cable.
92
7. Maintenance
This section describes the simple maintenance procedures you should follow to clean the filter, the projection win-
dow, and the cabinet.
❶ Cleaning the Filters
The filter at the intake vent keeps dust and dirt from getting inside the projector. If the filter is dirty or clogged, your
projector may overheat.
WARNING
Please do not use a spray containing flammable gas to remove dust attached to the filter etc. Doing so may
•
result in fires
NOTE:The message for filter cleaning will be displayed for one minute after the projector is turned on or off.When the message is displayed,
clean the filters. The time to clean the filter is set to [2000 H] at time of shipment.
To cancel the message, press any button on the projector cabinet or the remote control.
To clean the filter detach the filte unit and the filte cover.
CAUTION
•
Before cleaning the filters turn off the projector, disconnect the power cord and then allow the cabinet to cool.
Failure to do so can result in electric shock or burn injuries.
1. Press down two buttons and then pull the filter cover towards
you to open it.
Filter cover
2. Vacuum dust on the front and back faces of the filter unit.
• Get rid of dust in the filter.
• Gently get rid of dust on the filter cover and in the accordion
pleats of the filter.
NOTE:
• Whenever you vacuum the filter, use the soft brush to vacuum.This is to avoid
damage to the filter.
• Do not wash the filter with water. Doing so can result in filter clogging.
Filter cover
Filter unit
93
7. Maintenance
3. Put the filter cover back to the projector cabinet.
Keep to push the filter cover frame around the buttons
until a "click" sound is heard. The filter cover will be
secured in position.
4.
Clear the filter usage hours.
Plug the power cord into the wall outlet, and then turn on the
projector.
From the menu, select [RESET] → [CLEAR FILTER HOURS].
94
7. Maintenance
❷ Cleaning the Projection Window
•
•
•
Turn off the projector before cleaning.
Do not scratch or mar the projection windows as it is made of glass.
Use a blower or lens paper to clean the projection window, and be careful not to scratch or mar the glass sur-
face.
WARNING
Do not use a spray containing flammable gas to get rid of accumulated dust and dirt on the projection
window. It may cause of fire.
•
❸ Cleaning the Cabinet
Turn off the projector, and unplug the projector before cleaning.
•
Use a dry soft cloth to wipe dust off the cabinet.
If heavily soiled, use a mild detergent.
•
•
Never use strong detergents or solvents such as alcohol or thinner.
When cleaning the vents or the speaker using a vacuum cleaner, do not force the brush of the vacuum cleaner
into the slits of the cabinet.
Vacuum the dust off the vents.
•
•
•
Clogged vents may cause a rise in the internal temperature of the projector, resulting in malfunction.
Do not scratch or hit the cabinet with your finger or any hard objects
Contact your dealer for cleaning the inside of the projector.
NOTE: Do not apply volatile agent such as insecticide on the cabinet, the projection window, or the screen. Do not leave a rubber or vinyl
product in pro-longed contact with it. Otherwise the surface finish will be deteriorated or the coating may be stripped off.
95
8. Appendix
❶ Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Feature of each indicator
① POWER indicator
This indicator informs the power status of the projector.
② STATUS indicator
①
②
③
This indicator lights/blinks when a button is pressed while the
CONTROL PANEL LOCK function is utilized, or while performing the
specifi operations.
LIGHT indicator
③
This indicator informs the state of light, usage time of the light, and
the status of ECO MODE.
Indicator Message (Status message)
POWER
STATUS
LIGHT
Projector status
Power is off
Off
Off
Off
Off
In the state of Standby (Standby mode is NETWORK STANDBY and network is
ready)
Orange
Off
(Blink*1)
In the state of Standby (Network is unavailable)
Orange
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
(Blink*2)
In the state of Standby (Standby mode is NETWORK STANDBY and network is
available)
Orange
(Light)
In the state of Sleep
Green
(Light)
Powered state (ECO mode is OFF)
Blue
(Light)
Green
(Light)
Powered state (ECO mode is ON)
Blue
(Light)
Green (Blink*3)
Status varies
Off
OFF Timer is activated, OFF time as the program timer is activated (Powered state)
Preparing for powering ON
Blue
(Blink*3)
Blue
(Blink*4)
*1 Repetition to light on for 1.5 seconds / off for 1.5 seconds
*2 Repetition to light on for 1.5 seconds / off for 7.5 seconds
*3 Repetition to light on for 2.5 seconds / off for 0.5 seconds
*4 Repetition to light on for 0.5 seconds / off for 0.5 seconds
96
8. Appendix
Indicator Message (Error message)
LIGHT
POWER
STATUS
Projector status
Procedure
A button has been pressed while the
KEY LOCK is activated.
The projector's keys are locked. The
setting must be canceled to operate the
Blink
Orange
(Light)
Status varies
ID numbers for the projector and the
remote control do not match.
Check the control IDs (→ page 70)
Preparing to relight light after lighting
has failed.
Wait a while.
Blue (Blink*4)
Off
Off
Green (Blink*4)
Temperature problem (In the Forced
ECO)
Ambient temperature is high. Lower the
room temperature.
Blue
(Light)
Orange
(Light)
Temperature problem
Ambient temperature is out of the opera-
tion temperature. Check if any obstruction
stays near the exhaust vent.
Red
Off
Off
(Blink*4)
Light does not light.
Wait at least 1 minute, then turn on the
power back on. if the light still does
not light, contact your dealer or service
personnel.
Red
Green
(Light)
Red
(Light)
(Blink*4)
Error requiring service support
Contact your dealer or service personnel.
Make sure to check and inform indicator
status for asking to repair.
Red
Status varies
Status varies
(Light)
*1 Repetition to light on for 1.5 seconds / off for 1.5 seconds
*2 Repetition to light on for 1.5 seconds / off for 7.5 seconds
*3 Repetition to light on for 2.5 seconds / off for 0.5 seconds
*4 Repetition to light on for 0.5 seconds / off for 0.5 seconds
•
When the thermal protector is activated:
When inside temperature of the projector becomes too high or low, the POWER indicator start to red blink in a
short cycle. After this happened, the thermal protector will activate and the projector may be turned off.
In this case, please take the below measures:
-
-
-
-
Pull out the power plug from the wall inlet.
Place the projector in cool place if it has been placed in high ambient temperature.
Clean the exhaust vent if dust has accumulated on.
Leave the projector for about one hour until inside temperature gets lower.
97
8. Appendix
Explanation on the POWER indicator and standby state
Available ports in each state
In the state the selected STANBY MODE is NETWORK STANDBY.
(○: Available, ×: Unavailable)
PC CONTROL
LAN
Power
consumption
Indicator : Lights in blue
Powerd On state
Power On
High
○
○
Power Off
No operation/No communication with
the link-up network / No signal input for
approx. 180 seconds
Power On
Indicator : Lights in green
Sleep state
○
○
No operation/Link-
down network/No
signal input for approx.
180 seconds
Input
signal
Power On
Link-up
network
Input
signal
Indicator : Lights in orange
Standby state: The network
is linked.
○
○
Indicator : Blinks in orange
Standby state : Waiting to link
with the network
Link-down network
Link-down for approx.
180 seconds
Low
Power On
Indicator : Blinks in orange (with
long interval)
×
○
Standby state : The network is
unavailable.
98
8. Appendix
In the state the selected STANBY MODE is NORMAL.
Available ports in each state
(○: Available, ×: Unavailable)
PC CONTROL
LAN
Power
consumption
Indicator : Lights in blue
Powered ON state
High
○
○
Power Off
Power On
Indicator : Lights in green
Sleep state
○
○
No operation/No signal
input for approx.
10 seconds
Power On
Indicator : Blinks in orange (with long
interval)
Standby state : The network is unavailable.
×
○
Low
99
8. Appendix
Common Problems & Solutions
Problem
Check These Items
Does not turn on or shut
down
• Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on.
• Check to see if the projector has overheated. If there is insufficien ventilation around the projector or if the room where
you are presenting is particularly warm, move the projector to a cooler location�
• The light may fail to light. Wait a full minute and then turn on the power again.
• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or higher.
Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE] can
cause the projector to overheat and the projector could shut down. If this happens, wait a couple minutes and turn on
Will turn off
No picture
• Use the COMPUTER1, HDMI1, HDMI2, VIDEO or USB-A button on the remote control to select your source (COMPUTER,
• Ensure your cables are connected properly.
• Reset the settings or adjustments to factory preset levels using the [RESET] in the Menu. (→ page 80)
• Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power
to the notebook PC�
•
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being
powered up�
*
If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power
management software�
Picture suddenly be-
comes dark
• Check if the projector is in the Forced ECO mode because of too high ambient temperature. If this is the case, lower the
Color tone or hue is
unusual
• Check if an appropriate color is selected in [WALL COLOR]. If so, select an appropriate option. (→ page 66)
• Adjust [HUE] in [PICTURE]. (→ page 59)
Image isn’t square to the
screen
Picture is blurred
• Ensure that the distance between the projector and screen is within the adjustment range. (→ page 81)
Image is scrolling verti-
cally, horizontally or both
• Check the computer’s resolution and frequency. Make sure that the resolution you are trying to display is supported by
• Adjust the computer image manually with the Horizontal/Vertical in the [IMAGE OPTIONS]. (→ page 61)
Remote control does not
work
• Make sure there are no obstacles between you and the projector.
Indicator is lit or blinking
Cross color in RGB mode
•
For more information contact your dealer.
100
8. Appendix
If there is no picture, or the picture is not displayed correctly.
•
Power on process for the projector and the PC.
Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on
the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before
being powered up.
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this
means there is no signal being output from the computer.(→ page 77 or go to next step)
•
Enabling the computer’s external display.
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usu-
ally, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on
or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through
external display selections.
•
•
Non-standard signal output from the computer
If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed
correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use.
Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previ-
ous step. Refer to your computer’s documentation for detailed information.
Image displayed is incorrect when using a Mac
When using a Mac with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) ac-
cording to your resolution. After setting, restart your Mac for the changes to take affect.
For setting display modes other than those supported by your Mac and the projector, changing the DIP switch
on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP switch
to the 13" fixe mode and then restart your Mac. After that, restore the DIP switches to a displayable mode and
then restart the Mac again.
NOTE: A Video Adapter cable manufactured by Apple Inc. is needed for a MacBook which does not have a mini D-Sub 15-pin terminal.
•
•
Mirroring on a MacBook
*
When using the projector with a MacBook, output may not be set to 1024 × 768 unless “mirroring” is off on
your MacBook. Refer to owner’s manual supplied with your Mac computer for mirroring.
Folders or icons are hidden on the Mac screen
Folders or icons may not be seen on the screen. Should this happen, select [View] → [Arrange] from the Apple
menu and arrange icons.
101
8. Appendix
❷ Specifications
This section provides technical information about projector’s performance.
Optical
Model Number
NP-UM383WL
LCD Panel
0.76 inch LCD with Micro Lens Array ( Aspect Ratio 16: 10 )
1280×800 pixels (WXGA)
F = 1.78-1.83 f = 4.92-5.18mm
Resolution*1
Lens
Digital Zoom and Manual
Zoom
Manual
Focus
Lens shifting
H: 2%, V: 3%
HLD + LED
Light
ECO MODE OFF 340W
272W
170W
3800 lumens
80%
50%
NORMAL
ECO
Light Output*2*3
NORMAL
ECO
Contrast Ratio
(full white/full black)
Screen Size(Diagonal)
Projection Distance
(Min.-Max.)
200000:1
70-130 inches
0.4-0.8m
Projection Angle
59-60 (wide), 58-59 (tele)
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode is selected as the
[PRESET] mode, the light output value may drop slightly.
*3 Compliance with ISO21118-2012
Mechanical
Model Number
Installation Orientation
Dimensions
NP-UM383WL
Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
16.7" (W) × 6.2" (H) × 17.7" (D)/425 mm (W) × 156.7 mm (H) × 449 mm (D)
(including protrusions)
16.7" (W) × 6.0" (H) × 17.7" (D)/425 mm (W) × 153.2 mm (H) × 449 mm (D) (not
including protrusions)
Weight
10.7 kg/23.6 lbs
Environmental
Considerations
Operational Temperatures : 41° to 104°F (5° to 40°C),
(ECO mode selected automatically at 95°F to 104°F/35°C to 40°C)
20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-
condensing)
Operating altitude: 0 to 2700 m/8800 f (Set [FAN MODE] to [HIGH ALUTITUDE]
when using the projector at altitudes approximately 1700 m/5500 f) or higher.
UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Regulations
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950-1, TÜV GS Approved)
102
8. Appendix
Electrical
Model Number
NP-UM383WL
1 × RGB/Component (D-SUB 15 P),
2 × HDMI Type A (19P, HDMI® Terminal) HDCP supported*4,
Inputs
1 × Video (RCA), 1 × (L/R) RCA Audio, 1 × Stereo Mini Audio
1 × RGB (D-Sub 15 P), 1 × Stereo Mini Audio
Outputs
PC Contral
Wired LAN Port
1 × PC Control Port (D-Sub 9 P), 1 × SERVICE Port (Type: USB-B)
1 × RJ-45 (10BASE-T/100BASE-TX)
USB Port
1 × Type A
Color Reproduction
10-bit signal processing (1.07 billion colors) (Viewer, Network: 16.7 million colors)
Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+
/WXGA++/UXGA/WSXGA+/HD/Full HD/WUXGA/Mac13", 16", 21", 23"
Component: 480i/480p/576i/576p/720p/1080i/1080p
Compatible Signals*5
HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+
/WXGA++/WSXGA+/480p/576p/720p/1080i/1080p
540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz (HDMI: 50 Hz to 85 Hz)
Separate Sync
2 ×10 W (stereo)
100 - 240 V AC, 50/60 Hz
4.9 A-1.9 A
Horizontal Resolution
Scan Rate
Sync Compatibility
Built in Speaker
Power Requirement
Input Current
Power
Consump-
tion
ECO MODE OFF 460 W (100-130 V)/443 W (200-240 V)
374 W (100-130 V)/341 W (200-240 V)
248 W (100-130 V)/219 W (200-240 V)
1.6 W (100-130 V)/1.8 W (200-240 V)
NORMAL
ECO
STANDBY
(NETWORK
STANDBY)
0.26 W (100-130 V)/0.39 W (200-240 V)
STANDBY
(NORMAL)
*4 HDMI® (Deep Color, Lip Sync) with HDCP
What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a
system for preventing illegal copying of video data sent over a High-Definition Multimedia Interface (HDMI).
If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly.
With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be dis-
played due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Video: Deep Color; 8/10/12-bit, LipSync
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
*5 An image with higher or lower resolution than the projector’s native resolution (1280 × 800) will be displayed with Advanced
For additional information visit:
For information on our optional accessories, visit our website or see our brochure.
The specification are subject to change without notice.
103
8. Appendix
❹ Pin Assignments of D-Sub COMPUTER Input
Terminal Mini D-Sub 15 Pin Terminal
Pin No.
RGB Signal (Analog)
YCbCr Signal
11 12 13 14 15
10
1
2
Red
Cr
Y
6
7
8
9
Green or Sync on Green
Blue
Ground
Ground
Red Ground
Green Ground
Blue Ground
Hotplug
1
2
3
4
5
3
Cb
4
Signal Level
5
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
6
Cr Ground
Y Ground
Cb Ground
7
8
9
10
11
12
13
Sync Signal Ground
No Connection
Bi-directional DATA (SDA)
Horizontal Sync or Composite
Sync
14
15
Vertical Sync
Data Clock
COMPUTER IN
NOTE: Pin Nos. 12 and 15 are required for DDC/CI.
105
8. Appendix
5
Compatible Input Signal List
Analog RGB
Composite Video
Resolution
( dots )
640 × 480
Refresh Rate
( Hz )
60/72/75/85/
iMac
56/60/72/75/85/
iMac
60/70/75/85/
Refresh Rate
Signal
VGA
Aspect Ratio
4:3
Signal
Aspect Ratio
( Hz )
60
50
60
NTSC
PAL
PAL60
SECAM
4:3
4:3
4:3
4:3
SVGA
XGA
800 × 600
4:3
4:3
50
1024 × 768
iMac
60
60
60
HDMI
WXGA
1280 × 768*1
1280 × 800*1
1360 × 768*2
1366 × 768*2
1280 × 960
1280 × 1024
1400 × 1050
1440 × 900
1600 × 900*2
1600 × 1200*3
1680 × 1050
1280 × 720
1920 × 1080
1920 × 1200*4
640 × 480
15:9
16:10
16:9
16:9
4:3
Resolution
( dots )
Refresh Rate
Signal
Aspect Ratio
( Hz )
60
60
60
60
60
60
60
60
60
60
60
VGA
SVGA
XGA
640 × 480
800 × 600
1024 × 768
1280 × 768*1
1280 × 800*1
1366 × 768
1280 × 960
1280 × 1024
1400 × 1050
1440 × 900
1600 × 900
1680 × 1050
1920 × 1200
1920 × 1080
1920 × 1080
1280 × 720
720 × 480
720 × 576
720 × 480
720 × 576
4:3
4:3
4:3
15:9
16:10
16:9
4:3
5:4
4:3
16:10
16:9
16:10
16:10
16:9
16:9
16:9
4:3/16:9
4:3/16:9
4:3/16:9
4:3/16:9
60
Quad-VGA
SXGA
SXGA+
WXGA+
WXGA++
UXGA
WSXGA+
HD
Full HD
WUXGA
MAC 13"
MAC 16"
MAC 19"
MAC 21"
MAC 23"
60/75
60/75
60
60
60
60
60
60
60
60
67
75
75
75
65
5:4
4:3
WXGA
16:10
16:9
4:3
16:10
16:9
16:9
16:10
4:3
4:3
4:3
4:3
5:4
Quad-VGA
SXGA
SXGA+
WXGA+
WXGA++
WSXGA+
WUXGA
60
60*5
50/60
50/60
50/60
60
832 × 624
HDTV (1080p)
HDTV (1080i)
HDTV (720p)
SDTV (480p)
SDTV (576p)
SDTV(480i)
SDTV(576i)
1024 × 768
1152 × 870
1280 × 1024
50
60
50
Component
Refresh Rate
( Hz )
50/60
50/60
50/60
60
Signal
Format
Aspect Ratio
*1 Native resolution
HDTV (1080p)
HDTV (1080i)
HDTV (720p)
SDTV (480p)
SDTV (576p)
SDTV (480i)
SDTV (576i)
1920 × 1080
1920 × 1080
1280 × 720
720 × 480
720 × 576
720 × 480
720 × 576
16:9
16:9
16:9
4:3/16:9
4:3/16:9
4:3/16:9
4:3/16:9
*2 The projector may fail to display these signals correctly when
[AUTO] is selected for [ASPECT RATIO] in the on-screen menu.
The factory default is [AUTO] for [ASPECT RATIO]. To display these
signals, select [16:9] for [ASPECT RATIO].
*3 WXGA MODE: OFF
*4 WXGA MODE: ON
50
60
50
*5 RB (Reduced blanking signal) is effective up to 154MHz.
NOTE:
An image with higher or lower resolution than the projector’s native resolution (1280 × 800) will be displayed with Advanced AccuBlend.
•
• Sync on Green and Composite sync signals are not supported.
• Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rate or
resolution on your PC. Refer to Display Properties help section of your PC for procedures.
106
8. Appendix
6
PC Control Codes and Cable Connection
PC Control Codes
Function
Code Data
POWER ON
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
02H
03H
01H
01H
01H
01H
01H
01H
12H
13H
14H
15H
POWER OFF
01H
03H
03H
03H
03H
03H
03H
10H
11H
12H
13H
INPUT SELECT COMPUTER
INPUT SELECT HDMI1
INPUT SELECT HDMI2
INPUT SELECT VIDEO
INPUT SELECT USB-A
INPUT SELECT LAN
PICTURE MUTE ON
PICTURE MUTE OFF
SOUND MUTE ON
SOUND MUTE OFF
01H
A1H
A2H
06H
1FH
20FH
09H
A9H
AAH
0EH
27H
28H
NOTE: Contact your local dealer for a full list of the PC Control Codes if needed.
Cable Connection
Communication Protocol
Baud rate�������������������������������������������38400 bps
Data length ����������������������������������������8 bits
Parity �������������������������������������������������No parity
Stop bit ����������������������������������������������One bit
X on/off����������������������������������������������None
Communications procedure����������������Full duplex
NOTE: Depending on the equipment, a lower baud rate may be recommended for long cable runs.
PC Control Terminal (D-SUB 9P)
To TxD of PC
To RxD of PC
To GND of PC
1
2
3
4
5
6
7
8
9
To RTS of PC
To CTS of PC
NOTE 1: Pins 1, 4, 6 and 9 are no used.
NOTE 2: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.
107
8. Appendix
7
Using the Computer Cable (VGA) to Operate the Projector
(Virtual Remote Tool)
Using the utility software “Virtual Remote Tool” that is available to download from our web site, Virtual Remote screen
(or toolbar) can be displayed on your computer screen.
This will help you perform operations such as projector’s power on or off and signal selection via the computer
cable (VGA), serial cable, or LAN connection. Only via serial or LAN connection it is also used to send an image to
the projector and register it as the logo data of the projector. After registering it, you can lock the logo to prevent it
from changing.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, audio mute, Logo transfer to the projector, and
remote control operation on your PC.
Virtual Remote screen
Toolbar
For getting the Virtual Remote Tool, please visit our web site and download it:
NOTE:
• When [COMPUTER] is selected from your source selection, the Virtual Remote screen or the toolbar will be displayed as well as your
computer screen.
• Use the supplied computer cable (VGA) to connect the COMPUTER IN terminal directly with the monitor output terminal of the computer
to use Virtual Remote Tool.
Using a switcher or other cables than the supplied computer cable (VGA) may cause failure in signal communication.
VGA cable terminal:
Pin Nos. 12 and 15 are required for DDC/CI.
• Virtual Remote Tool may not work depending on your computer’s specifications and version of graphic adapters or drivers.
• To run Virtual Remote Tool, “Microsoft .NET Framework Version 2.0” is required. The Microsoft .NET Framework Version 2.0, 3.0 or 3.5 is
available from Microsoft’s web page. Download and install it on your computer.
• Logo data (graphics) that can be sent to the projector with Virtual Remote Tool has the following restrictions:
(Only via serial or LAN connection)
- File size: Less than 1 MB
- Image size (resolution): Horizontal 1280 × vertical 800 dots or less
- Number of colors: 256 colors or less
TIP:
• Virtual Remote Tool can be used with a LAN and a serial connection.
• The projector’s COMPUTER IN terminal supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standard interface for
bidirectional communication between display/projector and computer.
108
8. Appendix
8
Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by
referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem
more efficiently
* Print this page and the next page for your check.
Frequency of occurrence □ always □ sometimes (How often?_____________________) □ other (__________________)
Power
□
□
No power (POWER indicator does not light blue) See also “Status
Shut down during operation�
Indicator (STATUS)”�
□
Power cord’s plug is fully inserted into the wall outlet�
□
□
□
Power cord’s plug is fully inserted into the wall outlet�
Main power switch is pressed to the ON position�
□
[AUTO POWER OFF] is turned off (only models with the [AUTO
POWER OFF] function)�
No power even though you press and hold the POWER button�
□
[OFF TIMER] is turned off (only models with the [OFF TIMER]
function)�
Video and Audio
□
□
□
No image is displayed from your PC or video equipment to the projector�
Parts of the image are lost�
□
□
□
Still no image even though you connect the projector to the PC
first, then start the P �
Still unchanged even though you press the AUTO ADJUST button�
□
Still unchanged even though you carry out [RESET] in the projec-
Enabling your notebook PC’s signal output to the projector�
tor’s menu�
• A combination of function keys will enable/disable the external
display. Usually, the combination of the “Fn” key along with one
of the 12 function keys turns the external display on or off.
Image is shifted in the vertical or horizontal direction�
□
□
□
Horizontal and vertical positions are correctly adjusted on a
computer signal�
□
□
□
No image (blue or black background, no display)�
Input source’s resolution and frequency are supported by the
projector�
Still no image even though you press the AUTO ADJUST button�
Still no image even though you carry out [RESET] in the projec-
Some pixels are lost�
tor’s menu�
□
Image is flickerin �
□
□
Signal cable’s plug is fully inserted into the input terminal
□
Still unchanged even though you press the AUTO ADJUST button�
A message appears on the screen�
( _____________________________________________ )
□
Still unchanged even though you carry out [RESET] in the projec-
tor’s menu�
□
□
The source connected to the projector is active and available�
□
Image shows flickering or color drift on a computer signal�
Still no image even though you adjust the brightness and/or the
contrast�
□
Input source’s resolution and frequency are supported by the
projector�
□
□
Image appears blurry or out of focus�
□
Still unchanged even though you checked the signal’s resolution
□
□
Image is too dark�
□
on PC and changed it to projector’s native resolution�
Remains unchanged even though you adjust the brightness and/
or the contrast�
□
Still unchanged even though you adjusted the focus�
No sound�
Image is distorted�
□
□
□
□
Audio cable is correctly connected to the audio input of the projector�
Image appears to be trapezoidal (unchanged even though you carry
out the [KEYSTONE] adjustment)�
Still unchanged even though you adjusted the volume level�
AUDIO OUT is connected to your audio equipment (only models with
the AUDIO OUT terminal)�
Other
□
□
Remote control does not work�
Buttons on the projector cabinet do not work (only models with the
[CONTROL PANEL LOCK] function)
□
□
□
No obstacles between the sensor of the projector and the remote
control�
□
[CONTROL PANEL LOCK] is not turned on or is disabled in the menu�
□
Projector is placed near a fluorescent light that can disturb the
infrared remote controls�
Still unchanged even though you press and hold the SOURCE button
for a minimum of 10 seconds�
Batteries are new and are not reversed in installation�
109
8. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
Projector
Signal cable
NEC standard or other manufacturer’s cable?
Model number:
Serial No�:
Model number:
Distribution amplifie
Model number:
Switcher
Length:
inch/m
Date of purchase:
Light operating time (hours):
Eco Mode:
□ OFF □ AUTO ECO
□ NORMAL □ ECO
Model number:
Adapter
Information on input signal:
Horizontal synch frequency
Vertical synch frequency
Synch polarity
[
[
] kHz
] Hz
Model number:
Installation environment
H □ (+) □ (−)
V □ (+) □ (−)
Screen size:
inch
Synch type
□ Separate □ Composite
□ Sync on Green
Screen type: □ White matte □ Beads □ Polarization
□ Wide angle □ High contrast
Throw distance:
feet/inch/m
Indicator Message:
Orientation: □ Ceiling mount □ Desktop
Power outlet connection:
□ POWER
Blinks in □ Blue □ Green □ Orange □ Red
] cycles
□ Connected directly to wall outlet
[
□ Connected to power cord extender or other (the number
Lights in □ Blue □ Green □ Orange □ Red
□ STATUS
of connected equipment______________)
□ Connected to a power cord reel or other (the number of
Blinks in □ Blue □ Green □ Orange □ Red
connected equipment______________)
[
] cycles
Lights in □ Blue □ Green □ Orange □ Red
LIGHT
Computer
□
Manufacturer:
Model number:
Notebook PC □ / Desktop □
Native resolution:
Refresh rate:
Blinks in □ Blue □ Green □ Orange □ Red
] cycles
[
Lights in □ Blue □ Green □ Orange □ Red
Remote control model number:
Video adapter:
Other:
Video equipment
Projector
PC
VCR, DVD player, Video camera, Video game or other
Manufacturer:
DVD player
Model number:
110
8. Appendix
REGISTER YOUR PROJECTOR! (for residents in the United
States)
Please take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare
service program.
Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form
online.
Upon receipt, we will send a confi mation letter with all the details you will need to take advantage of fast, reliable
warranty and service programs from the industry leader, NEC Display Solutions of America, Inc.
111
© NEC Display Solutions, Ltd. 2019
7N952943
|