Tips for use
Settings
Cleaning and care
The following message will appear in the
display: Insert the brew unit with a tablet in it.
Cleaning the main dispenser
Degreasing the brew unit
You need 1 Miele Cleaning Tablet to
degrease the brew unit. The process takes
approx. 12 minutes.
Bean system
You can change the names for the types of
coffee bean and/or reallocate the types of
bean under Settings | Type of beans.
Drink parameters
You can set the amount of coffee, the
brewing temperature, and pre-brewing for
each drink individually.
Profiles
You can set up profiles and individual
drinks to cater for different tastes and
preferences.
Expert mode
Changing settings
ĺ Tap the button.
ĺ Tap OK to save the setting.
If the main dispenser is in the uppermost
position, it cannot be dismantled. The
main dispenser must be moved into the
maintenance position to do this.
In Expert mode, you can change the
portion size while the drink is being made.
To do this, Expert mode must be switched
on (Settings | Expert mode).
Tip: Tapping takes you back to the
previous menu.
ĺ Select Settings .
ĺ Select the menu option you want and
change the setting as required.
ĺ Select Process from the drinks menu
using the arrow sensor.
The Degrease the brew unit message will
appear in the display.
If you do not allocate a type of bean, you
will be asked what type of bean you want
to use for the coffee as you make it.
Creating a profile
Quick Start Guide
Coffee Machine
ĺ Press the button for 3 seconds.
The portion size can only be changed
during the individual preparation stages.
ĺ Tap Change drink and select a drink.
ĺ Select Profiles followed by Create profile.
ĺ Tap OK.
Menu option
Available settings
Notes
ĺ Tap Drink parameters.
ĺ Enter the name you want (max.
8 characters) and then tap Save.
The maintenance program will then start.
ĺ Follow the instructions on the display.
Renaming bean types
Language
English, German, other languages
ĺ Select Amount of coffee, Brew temperature,
Pre-brewing, or Type of beans.
If you select the wrong language by mistake, you can easily find the Language option by following the
flag symbol .
ĺ Fill the water container to the descaling
symbol with lukewarm water.
The setting will not be saved and will only
apply to the current drink.
The 3 bean containers are shown in the
display as follows and are pre-named.
Only clean the brew unit by hand with
warm water. Do not use any cleaning
agents.
Processing a profile
ĺ Select the setting you want and tap OK.
Time
Display (Off/On/Night dimming)
Clock format (12 h/24 h)
Your choice of display will affect the energy consumption of your coffee machine.
ĺ Place 1 descaling tablet in the water.
ĺ Push the brew unit back into the coffee
machine.
When you have created at least one profile,
you can choose from the following options
under Process:
ĺ Tap OK again to save your changed
settings.
ĺ Reinsert the water container.
Date
ĺ Lock the brew unit: press and hold the
button under the brew-unit handle and,
while doing so, turn the handle to the
right.
ĺ Follow the additional instructions given
in the display.
ĺ Open the appliance door.
Timer
Timer 1 (Switch on at, Switch off at,
Switch off after)
Timer 2 (Switch on at, Switch off at)
TeaTimer (On/Off)
Dispensing
For Switch on at and Switch off at the timer must be activated and at least one day of the week must be
allocated.
Portion size
You can adjust the portion size for all
coffee drinks, hot water, all types of tea,
and drinks with milk.
ĺ Release the brew unit: press and hold
the button under the brew-unit handle
and, while doing so, turn the handle to
the left.
– Change name
– Delete profile
– Change profile
ĺ When Rinse the water container and fill it to
the descaling symbol with fresh tap water
appears in the display:
ĺ Pull the stainless steel cover off and then
pull the dispensing unit off.
ĺ Close the appliance door.
Stop
Type A
Type B
Type C
Descaling timer
ĺ Follow the additional instructions given
in the display.
ĺ Remove the water container and rinse
it thoroughly with clean water. Fill
the water container to the descaling
symbol with fresh tap water.
ĺ Pull the brew unit out of the coffee
machine.
ĺ Place the cup you want under the main
dispenser or hot water dispenser.
Creating and processing drinks in a
profile
Cancel
Expert mode
Eco Mode
Lighting
On/Off
On/Off
The cleaning process is complete when
rinsing has finished.
If you are using the same type of beans in
two or three bean containers at the same
time (for instance because you only use
one bean type), make sure you name them
in the exact same way.
ĺ Select Process using the arrow sensor.
ĺ Tap Change drink and select a drink.
ĺ Tap Portion size.
Once you have removed the brew
unit, do not change the position of the
handle on the brew unit.
ĺ Tap Create drink and select a drink.
ĺ Tap the bar and adjust the indicator
(small triangle) as you wish.
Brightness
(appliance switched on or switched off)
ĺ Change the portion size or drink
parameters.
The descaling process is complete when
rinsing has finished.
Descaling the appliance
Risk of damage from splashes from the
descaling solution.
Switch off after
ĺ Clean the brew unit by hand under
warm running water.
The drink will be made and Save will
appear in the display as soon as the
minimum dispensing amount is reached.
ĺ Enter a name for the new drink
(maximum 8 characters) and tap Save.
Type of beans
Type A, B, and C (Change name, Change
allocation)
ĺ Select Change name.
Sensitive surfaces and/or natural floors
can suffer damage.
When you have created at least one drink,
you can choose from the following options
under Process drink:
Info
ĺ Enter the name you want (max.
8 characters) and then tap Save.
ĺ When the cup is filled to the level you
want, tap Save.
System lock
On/Off
ĺ Twist off the upper section with the
holder for the milk pipe and pull it
off. Then pull the Y-shaped piece off.
Remove the dispensing spouts .
When the system lock is activated, the Switch on at option for the timer cannot be selected.
Wipe up any spills immediately when
descaling.
If you want to change the portion size for
coffee drinks made with milk or hot water,
the ingredients which make up the drink
will be saved one after the other while the
drink is being made.
Water hardness
Brightness
Volume
Soft, medium, hard, very hard
Allocating the bean types
– Change drink
(portion size, drink parameters, and
name)
You need 1 descaling tablet for the
descaling process. The process takes
approx. 12 minutes.
ĺ Select Change allocation.
ĺ Clean all parts thoroughly. Clean the
surfaces of the main dispenser with a
damp cloth.
Audible signals/keypad tones
If you have set up one or more profiles and
saved at least one coffee drink, first select
the profile.
– Delete drink
Cup heater
On/Off
On/Off
The Descale the machine message appears
in the display.
Dispenser
adjustment
The height of the main dispenser cannot be adjusted manually.
These short instructions are not a substitute for the operating instructions supplied
with the appliance. It is essential to familiarize yourself with the coffee machine
before using it for the first time. Please read the operating instructions carefully and
pay particular attention to the IMPORTANT SAFETY INSTRUCTIONS.
ĺ Reassemble the dispensing unit.
ĺ Change the allocation as required and
then tap OK.
ĺ Wipe any remaining coffee off the filters
(see arrows).
ĺ Tap OK.
ĺ Push the dispensing unit back into the
main dispenser and replace the stainless
steel cover.
Miele@home
Service
Setup
Additional functions are available if the coffee machine is connected to a WiFi network, and is signed
into the Miele@mobile app (see the Operating Instructions).
The maintenance program will then start.
ĺ Follow the instructions on the display.
Tip: If you tap all, you will highlight all
coffee drinks and you can deselect the
ones you do not want.
ĺ Dry the funnel in the brew unit.
Evaporate
Demo mode
The Evaporate function removes water from the system and should be used if the machine is not going
to be used for a long period of time or has to be moved.
Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for domestic
use.
ĺ Carefully clean the inside of the coffee
machine.
ĺ Tap OK.
Factory defaults
Appliance settings
Language, Time, Date, Number of drinks, and Profiles cannot be reset.
Network configuration
en-US, CA
M.-Nr. 11 675 670
|