Powered by
USER MANUAL
Smart True HEPA Air Purifier
Model: Core 400S Series
Questions or Concerns?
Please contact us at [email protected]
READ AND SAVE THESE
INSTRUCTIONS
SAFETY INFORMATION
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety
guidelines.
•
•
WARNING: To reduce the risk of fire
or electric shock, do not use this air
purifier with any solid-state speed
controls (such as a dimmer switch).
Not for commercial use. Household
use only.
General Safety
•
•
Only use your air purifier as described
in this manual.
Do not use without removing the plastic
wrap from the filter. The air purifier will
not filter air, and may overheat, causing
a fire hazard.
Power & Cord
•
•
Do not use the air purifier outdoors.
Keep the air purifier away from water,
and wet or damp areas. Never place in
water or liquid.
•
Keep the air purifier near the outlet it is
plugged into.
•
•
Never place the cord near any heat source.
Do not cover the cord with a rug, carpet,
or other covering. Do not place the cord
under furniture or appliances.
•
•
Do not use in excessively humid areas.
Keep the air purifier away from heat
sources.
•
Do not use where combustible gases,
vapours, metallic dust, aerosol (spray)
products, or fumes from industrial oil
are present.
•
Keep the cord out of areas where people
walk often. Place the cord where it will not
be tripped over.
•
•
•
•
•
Keep 1.5 m / 5 ft away from where
oxygen is being administered.
Supervise children when they are near
the air purifier.
Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all
standards regarding electromagnetic fields
(EMF). If handled properly and according
to the instructions in this user manual, the
appliance is safe to use based on scientific
evidence available today.
Do not place anything into any opening
in the air purifier.
Do not sit on or place heavy objects on
the air purifier.
Keep the inside of the air purifier dry. To
prevent moisture buildup, avoid placing
in rooms with major temperature
changes or underneath air conditioners.
Always unplug the air purifier before
servicing (such as changing the filter).
Do not use the air purifier if it is
damaged or not working correctly, or if
the cord or plug is damaged. Do not try
to repair it yourself. Contact Customer
Support (see page 19).
•
•
3
GETTING TO KNOW YOUR SMART AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C. Sleep Mode Button
D. Air Quality Indicator Rings
E. Check Filter Indicator Reset Button
F. Check Filter Indicator
G. Timer Button
L. Display Off Button
M. Display Lock Indicator
N. Display Lock Button
O. Air Outlets
P. Housing
Q. Air Inlets
R. AirSight™ Plus Laser Dust Sensor
S. Anti-Skid Pads
H. On/Off Button
I. Wi-Fi Indicator
T. Filter Cover
J. Auto Mode Button
K. PM2.5/Timer Display
U. True HEPA 3-Stage Original Filter
A
I
B
C
D
J
K
S
T
E
F
L
M
N
G
H
U
O
P
R
Q
Back
Front, upside down
4
CONTROLS & DISPLAY
Timer Button
On/Off Button
•
Cycles through timer
•
•
Turns the air purifier on/off.
Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
•
Press and hold
for 2
seconds to begin cycling
through the timer options in
1-hour increments.
Air Quality Indicator Rings
Auto Mode Button
•
These indicators use an
automatic sensor to display
the air quality: Blue (Very
Good), Green (Good),
Orange (Moderate), and
Red (Bad).
•
Turns Auto Mode on/off
Display Off Button
•
Turns the display off (see
Wi-Fi Indicator
Turns on, off, or blinks to
•
•
Tap any button (except
to turn the display back on.
)
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Display Lock Button
•
Prevents current settings
from being changed (see
3 seconds to turn Display
Lock on/off.
Fan Speed Button
•
Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo
(4 indicators).
•
The Display Lock Indicator
(
) will blink when any
other button is tapped to
indicate that Display Lock
is on.
•
Tapping the Fan Speed
Button while the air purifier
is in Auto Mode or Sleep
Mode (if the display is on)
will exit that mode.
Check Filter Indicator Reset
Button
•
Press and hold for 3
seconds to reset the Check
Filter Indicator.
Sleep Mode Button
•
Turns Sleep Mode on/off
•
The Check Filter Indicator
lights up when the filter
should be checked (see
5
GETTING STARTED
3. Replace the filter cover and twist
1. Flip the air purifier over or turn it on its
side. Twist the filter cover anticlockwise
and remove it. [Figure 1.1]
clockwise to lock. [Figure 1.3]
cover should
snap shut
Figure 1.3
Figure 1.1
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier. [Figure 1.2]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 inches of clearance on all
sides. Keep away from anything that
would block airflow, such as curtains.
[Figure 1.4]
15 in /
38 cm
15 in /
38 cm
Figure 1.4
Figure 1.2
6
VeSync App Setup
USING YOUR SMART
AIR PURIFIER
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up
1. Plug in and tap
to turn on the air
your smart air purifier.
purifier. The fan will start on low speed.
[Figure 2.1]
2. Optionally, tap
to change fan speed
between low, medium, high, and turbo.
Note:
•
The fan speed indicators will light up
when active. 1 indicator will light up for
low, 2 for medium, 3 for high, and 4 for
turbo.
•
•
Turbo speed is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at turbo speed for 15–20
minutes before using a lower speed.
•
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
Connect with Amazon Alexa or
Google Assistant™
You can use the VeSync app to connect
your smart air purifier to Amazon Alexa or
Google Assistant. Please follow the in-app
instructions to set up your voice assistant.
3. Tap
to turn off the air purifier.
Note: You must create your own VeSync account
to access voice assistants.
Figure 2.1
7
USING YOUR PURIFIER (CONT.)
Sleep Mode
Note:
•
The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change colour
based on the detected air quality.
Sleep Mode operates quietly by using a fan
speed lower than low speed.
1. Tap
to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after
3 seconds if no other buttons are tapped.
•
•
Auto Mode does not use the Turbo
fan speed.
Note:
The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Efficient Auto Mode (see
•
•
When the display is turned off, tap any
button (except ) to turn the display
back on. If you don’t tap another
button, the display will turn off again
after 3 seconds.
The Check Filter Indicator will still turn
on and stay on if it’s time to check your
PM2.5 Display
The PM2.5 value on the display shows the
amount of airborne particles (µg) that are
detected per 1 cubic metre (m³) of air volume.
Auto Mode
PM2.5 refers to particulate matter (PM) that
is less than or equal to 2.5 microns (µm) in
diameter. These particles, also known as
“fine particles”, are so small that they can only
be detected with an electron microscope,
and they stay in the air longer than heavier
particles such as dust and mould.
Auto Mode uses AirSight Plus, a smart laser
dust sensor inside the air purifier, to adjust
the fan speed automatically based on air
quality. For example, if the air quality is bad,
the fan will automatically be set to high
speed.
Your air purifier’s AirSight Plus laser dust
sensor detects the amount of PM2.5 particles
that are in a given space (µg/m³). Generally,
the lower the number, the better your air
quality. A number above 115 indicates that
there is an unhealthy amount of fine particles
in the air.
Air Quality Indicator Chart
Indicator
Colour
Air
Quality
Auto Mode
Fan Speed
Blue
Very Good
Sleep Mode
Green
Orange
Red
Good
Moderate
Bad
Low
Medium
High
8
USING YOUR PURIFIER (CONT.)
Timer
Display Off
You can set a timer for 1–12 hours.
This turns off the display lights on the air
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
1. Tap
. The display will switch from
showing the PM2.5 reading to the time
you’ve selected.
1. Tap
to turn off the display.
or
2. Tap
repeatedly to select a time in
1-hour increments. If you don’t touch any
buttons for 5 seconds, the display will
switch to showing the PM2.5 reading and
the timer will start automatically.
2. Tap any button (except
) to
temporarily turn the display back on. If
you don’t tap another button, the display
will turn back off after 3 seconds.
3. Tap
to turn the display back on. The
display will stay on.
Note: Press and hold
for 2 seconds to
cycle through timer options automatically in
1-hour increments.
Note: The Check Filter Indicator will still turn
on and stay on if it’s time to check your filter
3. The timer will count down from your
selected time.
Display Lock
Note:
•
•
While a timer is active, tapping
will
When the air purifier is on, you can lock
the display to prevent settings from being
accidentally changed. Buttons will not
respond to being tapped.
show the remaining time, rounded up to
the nearest hour. Tap
again within
5 seconds to add more time in 1-hour
increments.
1. Press and hold
for 3 seconds to lock
indicator will light up
You can see the exact remaining time in
the VeSync app.
the display. The
in the centre of the display.
4. When the timer is finished, the air purifier
Note: If the display is turned off, the
indicator will flash 3 times to show that the
display has been locked, then turn off.
will turn off.
5. To cancel a timer, tap
repeatedly until
the display reads “--H”.
2. The
indicator will blink when any
other button is tapped to indicate that
Display Lock is on.
Note:
•
•
•
You can change the fan speed at any
time while the timer is on.
3. Tap and hold
again for 3 seconds to
The timer will restart if the time is
changed.
unlock the display. The
turn off.
indicator will
The air purifier will remember the last
timer setting while turned off, but the
timer will be cancelled and need to be
restarted.
Note:
•
If the display is turned off, the
indicator will flash 3 times to show that
the display has been unlocked.
•
You can set a timer for 1–24 hours in
the VeSync app.
•
Display Lock can still be used when the
air purifier is in Standby Mode.
9
USING YOUR PURIFIER (CONT.)
Air Quality Updates
Standby Mode
•
View real-time PM2.5 updates in
the app.
The air purifier is in Standby Mode when it is
turned off, but plugged in.
•
See your air quality history for the
previous week.
Note: Display Lock can be used while
the air purifier is in Standby Mode to
keep the air purifier from being turned
back on. The laser dust sensor will still
detect the surrounding air quality and
give you updates in the VeSync app.
Auto Mode
•
Access additional Auto Modes: Quiet
Auto Mode and Efficient Auto Mode.
•
Quiet Auto Mode never uses the 2
highest fan speeds to avoid making
too much noise.
Memory Function
When the air purifier is plugged in and
turned off, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Display
Lock, and Display Off settings.
•
Efficient Auto Mode lets you choose
the size of the area you want to
purify. The air purifier will use the
highest fan speed to clean the air
in that area. Once your air is clean,
it will lower to the fan speed best
suited to the selected room size.
When the air purifier is unplugged and
turned off, it will only remember its previous
fan speed, Sleep Mode, and Auto Mode.
Note: The air purifier will remember the
last timer setting chosen (1–12 hours), but
it will not automatically resume the timer.
You will need to restart the timer after the
air purifier is turned back on.
Schedules
Create and customise schedules for
your air purifier to match your routines.
•
Timer Function
VeSync App Functions
•
•
Set a timer between 1–24 hours.
The VeSync app allows you to access
additional smart air purifier functions, including
those listed below. As the app develops, more
features may become available.
Easily view the exact time remaining
on a timer.
Filter Replacement Info
Remote Control
•
Keep tabs on the remaining filter life
by checking the filter life percentage
in the app.
•
Change any air purifier settings
through the app, even while
Display Lock is on.
•
Shop for replacement filters.
10
ABOUT THE FILTER
The air purifier uses a 3-stage filtration
system to purify air.
A
B
C
A. Pre-Filter
•
•
Customised using the ARC formula
to be especially effective for cooking
smells and pet odours in a multi-pet
household.
•
Captures large particles such as dust,
lint, fibres, hair, and pet fur.
•
Maximises the filter’s life by
protecting it.
Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulphide, and volatile
organic compounds (VOCs).
B. H13 True HEPA Filter
•
Captures at least 99.97% of airborne
particles 0.3 microns (µm) in size
*The H13 True HEPA Filter can remove
most viruses and bacteria from the air,
but cannot fully remove them from your
environment. Air purifiers cannot prevent
an infected person from spreading an
infection, and cannot remove bacteria and
viruses from surfaces. Please use this air
purifier together with other precautions.
•
Traps small particles such as mould
spores, fine dust, smoke particles,
bacteria and viruses*, and allergens
such as pollen, dust mites, and pet
dander.
C. Custom High-Efficiency Activated
Carbon Filter
•
Physically adsorbs smoke, odours,
and fumes.
11
ABOUT THE FILTER (CONT.)
Clean Air Delivery Rate
Humidity
This air purifier has a Clean Air Delivery Rate
of 400 m³/h or 235 cubic feet per minute (CFM).
Moisture may damage the filter. This air
purifier should be used in an area with a
humidity level below 85% RH. If you use the
air purifier in excessively humid areas, the
surface of the filter may become mouldy.
Clean Air Delivery Rate (CADR) measures
the efficiency of an air purifier by indicating
the volume of clean air that an air purifier
produces per minute. This is based on
removal of dust, pollen, and smoke, which
are the 3 most common indoor air pollutants.
The higher the CADR, the more particles
the air purifier will remove and the larger the
area it can clean. The rating is measured at
the air purifier’s highest speed.
Note: Water or moisture will allow mould to
grow. To solve a mould problem, get rid of
the source of the moisture and clean up the
mould. Air purifiers cannot solve an existing
mould problem, and can only remove
airborne mould spores and reduce odours.
Essential Oils
Air Change Per Hour
Do not add essential oils to the air purifier
or filter. The filter will become damaged
by the oil and will eventually release an
unpleasant smell. Do not use diffusers
near the air purifier.
The air change rate is how many times
all of the air in a room can be purified (or
“changed”) by the air purifier in 1 hour. Air
changes per hour (ACH) are calculated with
the recommended room size assuming
2.4 m / 8 ft ceilings. For smaller rooms, the
air change per hour will increase. This air
purifier has an air change per hour of 2,
which means it can change air 2 times per
hour at the max speed in a single, closed
room up to 83 m². The air purifier is effective
for larger rooms, but air purification will take
longer, with fewer air changes per hour.
Note: To effectively clean air, keep windows
and doors closed while the air purifier is on.
12
CARE & MAINTENANCE
Cleaning the Smart Air Purifier
Resetting the Check
Filter Indicator
•
•
Unplug before cleaning.
Reset the Check Filter Indicator when:
Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
A.
lights up red.
2. Turn on the air purifier.
•
•
Vacuum the inside of the air purifier.
3. Press and hold the
button for
3 seconds.
Do not clean with abrasive chemicals or
flammable cleaning agents.
4.
will turn off when successfully
reset.
B. The filter was changed before
Check Filter Indicator
lit up.
1. Press and hold the
button for
will light up as a reminder to check the
filter. Depending on how often you use the air
purifier, the indicator should turn on at about 12
months. You may not need to change your filter
3 seconds.
2. The
will flash for 3 seconds.
will turn off when successfully
reset.
3.
yet, but you should check it when
turns on.
When your air purifier is set up with the VeSync
app, you can also check the app to see your
remaining filter life. You will also receive a
notification from VeSync when it’s time to
check your filter.
Cleaning the Filter
The outer pre-filter should be cleaned every
2–4 weeks to increase efficiency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. [Figure 3.1] Do not
clean the filter with water or other liquids.
The VeSync app uses a scientific algorithm to
determine your filter life based on air quality,
amount of use, and other factors. The filter life
percentage is based on 12 hours of daily use.
Figure 3.1
Filter
When to Clean
How to Clean
When to Replace
Every 2–4
weeks
Use a soft brush or vacuum
Pre-Filter
hose [Figure 3.1]
12 months
True HEPA
& Activated
Carbon Filter
Do not clean
13
CARE & MAINTENANCE (CONT.)
When Should I Replace the
Filter?
Replacing the Filter
1. Unplug the air purifier. Flip the air purifier
over or turn it on its side. Remove the
The filter should be replaced every 12 months.
You may need to replace your filter earlier
or later depending on how often you use
your air purifier. Using your air purifier in an
environment with relatively high pollution may
mean you will need to replace the filter more
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
often, even if
is off.
You may need to replace your filter if you
notice:
4. Unwrap the new filter and place it into the
•
•
•
•
Increased noise when the air purifier is on
Decreased airflow
Unusual odours
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
A visibly clogged filter
Note:
Storage
•
To maintain the performance of your air
purifier, only use official Levoit filters. To
buy replacement filters, go to Amazon
and search B08SQQK6K7.
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
•
Remember to reset
after changing
Cleaning the AirSight Plus
Laser Dust Sensor
Figure 3.2
The AirSight Plus Laser Dust Sensor can be
blocked by dust, which affects the sensor’s
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
Figure 3.3
14
TROUBLESHOOTING
Problem
Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer
Airflow is significantly
reduced.
Make sure the filter is removed from its packaging and
Tap
to increase the fan speed.
Leave 38 cm / 15 inches of clearance on all sides of the
air purifier.
The pre-filter may be clogged by large particles, such as hair
Air purifier makes an unusual Make sure the filter is properly in place with plastic packaging
noise while the fan is on.
Make sure the air purifier is operating on a hard, flat,
level surface.
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Strange smell coming from
the air purifier.
Clean the filter, or replace if necessary.
Make sure not to use your air purifier in an area with high
humidity or while diffusing essential oils.
15
TROUBLESHOOTING (CONT.)
Problem
Possible Solution
Poor air purification quality.
Tap
to increase the fan speed.
Make sure no objects are blocking the sides or top of the air
purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and
Close doors and windows while using the air purifier.
If the room is larger than 83 m², air purification will take
longer. The air purifier may not be as effective in significantly
larger rooms.
is still on after replacing
the filter.
has not turned on within
12 months.
is a reminder for you to check the filter and will light up
based on how much the air purifier has been used (see page
13). If you don’t use your air purifier often,
to turn on.
will take longer
turned on before 12
months.
is a reminder for you to check the filter and will light up
based on how much the air purifier has been used (see page
13). If you run your air purifier frequently,
sooner.
will turn on
Air Quality Indicator always
stays red.
The AirSight Plus Laser Dust Sensor may need to be
If you’re using an ultrasonic humidifier near the air purifier,
the mist may affect the accuracy of the AirSight Plus Laser
Dust Sensor. The sensor will detect the large mist particles,
and the Air Quality Indicator may turn red. Avoid using an
ultrasonic humidifier near the air purifier, or avoid using
Auto Mode.
Air Quality Indicator always
stays blue, even when the air
quality is poor.
The AirSight Plus Laser Dust Sensor detects airborne
particles, but it cannot detect gas. Make sure there isn’t gas
polluting the air.
Display shows Error Code
“E1”.
The motor has malfunctioned. Please contact Customer
Support (see page 19).
16
VESYNC APP TROUBLESHOOTING
My air purifier isn’t connecting to the VeSync app.
•
•
•
Make sure your phone has Bluetooth turned on and is not currently connected to another
Bluetooth device.
During the setup process, you must be on a secure 2.4GHz Wi-Fi network. Confirm that the
network is working correctly.
Make sure the Wi-Fi password you entered is correct.
•
•
•
There should be no spaces at the beginning or end of the password.
Test the password by connecting a different electronic device to the router.
If you’re manually typing in the SSID and password, double check that both are entered
correctly.
•
Try moving your air purifier closer to the router. Your phone should be as close as possible
to your air purifier.
•
•
Your router may need to be at a higher location, away from obstructions.
Make sure your air purifier and router are away from appliances (such as microwave ovens,
refrigerators, electronic devices, etc.) to avoid signal interference.
•
•
If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, the
air purifier will not be able to access your Wi-Fi network, and setup will fail.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through a
web page before you can use the Internet.
My air purifier is offline.
•
•
•
Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by
swiping down on the screen.
Make sure your router is connected to the internet and your phone’s network connection is
working.
Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or press and hold
(Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the air purifier
to go offline.
17
ABOUT ENERGY-RELATED PRODUCTS
The product, in accordance with the Eco-design Requirements for Energy Related Products
Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC)
NO. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Required Power State Information
Networked Standby
≤ 2.0 W
Power consumption in specified power mode,
at 230V/50Hz input
Time after which equipment is automatically
switched into mode
Immediately
Network port deactivation/activation procedures Disconnecting the Wi-Fi connection will
deactivate the Wi-Fi network. Connecting
the device to Wi-Fi will activate the Wi-Fi
network.
Networked Standby Mode: When the Wi-Fi network is activated, press and hold the On/Off
button, and the device will immediately enter the networking standby state.
WARRANTY INFORMATION
Product Name Smart True HEPA Air Purifier
Model Core 400S Series
For your own reference, we strongly recommend
that you record your order ID and date of purchase.
Date of Purchase
Order ID
Terms & Policy
Arovast Corporation warrants all products
to be of the highest quality in material,
craftsmanship, and service for 2 years,
effective from the date of purchase to
the end of the warranty period. Warranty
lengths may vary between product
categories.
If you have any questions or concerns
about your new product, please contact our
helpful Customer Support Team.
18
CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Email: [email protected]
*Please have your order invoice and order ID
ready before contacting Customer Support.
ATTRIBUTIONS
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android, and Google Play are trademarks of Google LLC.
App Store® is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and
certain other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Arovast Corporation is under license.
19
CONNECT WITH US
@LEVOITUK
JJ011821CW-M1_0121Core400S_uk
|