KDC-X798
KDC-BT758HD
KDC-BT710HD
CIND-SRETCERIVUERCTION MANUAL
AMMOPLID-TUENDER’LEECMTEPURLDOEICD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X798/ KDC-BT758HD/ KDC-BT710HD Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
GET0971-001A (KW/K0)
BASICS
Faceplate
Remote control (RC-406)
Volume knob
(turn/press)
Display window
Remote sensor (Do not expose
to bright sunlight.)
Pull out the
insulation sheet
when using for the
first time.
Detach button
Attach
Detach
How to reset
How to replace the battery
Your preset
adjustments will also
be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press and hold SRC to turn off the power.
Press BSRC.
• Press and hold to turn off the power.
Turn the volume knob.
( Pressing SRC does not turn on the power. )
Adjust the volume
Press VOL
or VOL
.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press SRC repeatedly.
Press BSRC repeatedly.
Change the display
information
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
3
ENGLISH |
GETTING STARTED
3
Set the initial settings
1
2
3
4
Press BSRC to enter STANDBY.
Press the volume knob to enter [FUNCTION]
.
Turn the volume knob to make a selection (see the following table), then press the knob.
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
1
Cancel the demonstration
AUDIO CONTROL
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
or 6 inches) or OEM speakers for optimum performance.
DISPLAY
1
Press the volume knob.
EASY MENU
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.
OFF: Both display and button illumination remain as [COLOR SELECT] color.
(
20)
2
TUNER SETTING
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the
selected band or SiriusXM channel.
2
Set the clock
TAGGING SETUP KDC-X798
:
FRONT USB
/
REAR USB: Selects the USB input terminal for tagging if two iPod
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press
the knob.
devices are connected.
SYSTEM
3
4
Turn the volume knob to select [CLOCK ADJUST], then
press the knob.
Turn the volume knob to make the settings, then
press the knob.
Day Hour Minute
Turn the volume knob to select [CLOCK FORMAT], then
press the knob.
KEY BEEP
SOURCE SELECT
ON: Activates the keypress tone. ; OFF: Deactivates.
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. 8)
: Automatically distinguishes between audio file disc and music CD. ;
music CD. No sound can be heard if an audio file disc is played.
(
9)
(
10)
(
5
6
7
CD READ
1
2: Forces to play as an
Turn the volume knob to select [12H] or [24H], then
press the knob.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
4
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
CD
Label side
M
Eject disc
To
Do this
Pause or resume
playback
Press 6 IW (or press ENT IW on RC-406).
USB
USB input terminal
Select a track/file
Press S / T (or press S / T (+) on RC-406).
3
*
Select a folder
Press J/ K (or press AM– / #FM+ on RC-406).
*
CA-U1EX (max.: 500 mA)
(optional accessory)
Reverse/
Fast-forward
Press and hold S / T (or press and hold S / T (+) on RC-406).
4
*
Repeat play
Press 4
repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
and/or
• MP3/WMA/AAC/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC)
USB cable from the rear of the unit (for KDC-X798
)
file
(
20): FILE REPEAT, REPEAT OFF
iPod/iPhone
USB input terminal
KCA-iP102 (optional
accessory) or
4
*
Random play
Press 3
repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/AAC/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
accessory cable of
1
*
the iPod/iPhone
5
*
Press and hold 3
to select “ALL RANDOM”.
and/or
USB cable from the rear of the unit
1
*
*
*
*
*
Do not leave the cable inside the car when not using.
2
3
4
5
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/AAC/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA/AAC files.
(for KDC-X798
)
Press 5 iPod to select the control mode while
in iPod source.
2
*
MODE ON: From the iPod .
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn
Radio, TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
MODE OFF: From the unit.
5
ENGLISH |
CD / USB / iPod
Select a track/file from a list
Direct Music Search (using RC-406)
Set the skip search ratio
For iPod: Applicable only when [MODE OFF] is
1
2
Press DIRECT.
While listening to iPod or KME Light/ KMC file...
selected.
(
5)
Press the number buttons to enter a track/
file number.
1
Press the volume knob to enter [FUNCTION].
1
2
Press
.
2
Turn the volume knob to select [USB], then
press the knob.
Turn the volume knob to make a selection,
then press the knob.
3
Press ENT IW to search for music.
3
4
Turn the volume knob to select
[SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
• To cancel, press
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
.
• MP3/WMA/AAC/WAV file: Select the
desired folder, then a file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
0.5% (default)/ 1% 5%/ 10%: Skip search
/
Select a song by name
ratio over the total files.
*
ARTISTS, ALBUMS, SONGS, PODCASTS ,
5
Press and hold
to exit.
*
While listening to iPod...
1
2
GENRES, COMPOSERS ).
Press
.
*
Only for iPod.
Turn the volume knob to select a category,
then press the knob.
Change the USB drive
• To return to the root folder (or first file), press
number button 5 iPod.
• To return to the previous setting item or
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press 5 iPod repeatedly to select the desired
drive.
(or)
3
4
5
Turn the volume knob quickly to enter
character search.
Turn the volume knob to select the
character to be searched for.
Press S / T to move to the entry
position.
You can enter up to 3 characters.
Press the volume knob to start searching.
Turn the volume knob to make a selection,
then press the knob.
hierarchy, press
.
• To cancel, press and hold
.
If you have many files....
You can search through them quickly (on step 2
above) at a preset skip search ratio by pressing
S / T.
6
7
• See also “Set the skip search ratio.”
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then
press the knob.
• Pressing and holding S / T skip songs at
Repeat step 7 until the desired item is
selected.
the maximum ratio (10
%) regardless of the
setting made.
• To search for a character other than A to Z
3
4
Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
Press the volume knob to select
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
and 0 to 9, enter only “ ”.
*
• To return to the previous hierarchy, press
.
[DRIVE CHANGE]
.
• To return to the top menu, press number
The next drive is selected automatically.
button 5 iPod.
Repeat steps 1 to 4 to select the following
• To cancel, press and hold
.
drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
6
HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Direct Access Tuning (using RC-406)
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency or channel.
Press ENT IW to search for a station or channel.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
Other settings
1
2
Press the volume knob to enter [FUNCTION].
Search for a station or channel
Turn the volume knob to make a selection (see the following table), then
press the knob.
1
2
Press BSRC to select HD RADIO.
Press J BAND repeatedly (or press AM– / #FM+ on RC-406)
*
3
Press and hold
to exit.
to select FM1/ FM2/ FM3/ AM.
Press S / T (or press S / T (+) on RC-406) to search for
To return to the previous setting item or hierarchy, press
.
3
Default: XX
a station or channel.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station or channel.
AUTO2: Search for a preset station or channel.
MANUAL: Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1 to 6).
• To select a stored station or channel: Press one of the number
buttons (1 to 6) (or press one of the number buttons (1 to 6) on
RC-406).
TUNER SETTING
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises
from adjacent FM stations, but sound quality will not be degraded and the stereo
effect will remain.
AUTO
MEMORY
RECEIVE
MODE
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORMAL] is selected for [PRESET TYPE].)
(
4)
Sets the receive mode of the HD Radio receiver.
AUTO : Automatically tunes to analog broadcast when there is no digital
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to
analog broadcast only.
Select an HD Radio multicast channel
TAG MEMORY Displays the shared tag memory usage of the HD Radio tags and SiriusXM Radio
tags.
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio
multicast channels....
00
—
50: Up to 50 tags can be registered to this unit.
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
Press S / T to select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
7
ENGLISH |
HD Radio™ tuner
AUX
Preparation:
Tag and purchase your favorite songs
from iTunes Store
2
Select [ON] for [BUILT-IN AUX]
.
(
4)
Transfer the tagged PSD to your
iPod/iPhone
Start listening
Some HD Radio broadcasts provide Program
Service Data (PSD) for songs. You can tag the
song while listening to an HD Radio broadcast
and easily purchase the song from iTunes store.
This unit memorizes up to 50 tags for HD Radio
and SiriusXM Radio content.
Connect the iPod/iPhone to the unit.
The source changes to “USB,” and starts
transferring the tagged PSDs to the iPod/
iPhone automatically.
• While transferring, “TAG” flashes and “TAG
STORING” appears. When all the tagged PSDs
are transferred, “TAG TRANSFERD” appears.
• Your iPod/iPhone must have 50 MB free space
which is required for transferring a tagged
PSD.
• During the transferring process:
– Do not change the source.
– Do not disconnect the iPod/iPhone.
• When the connected iPod/iPhone is not
compatible with iTunes Tagging you cannot
transfer the tagged PSDs.
1
Connect a portable audio player
(commercially available).
Auxiliary input jack
• To check the number of the tag memory
used,
(
7).
• For the best compatibility of iTunes Tagging,
use the latest software versions with the iPod/
iPhone that can be connected to this unit.
Portable audio
player
3.5 mm (1/8") stereo mini plug with
“L” shaped connector (commercially
available)
(
20)
• iTunes 7.4 or later version is required.
• For details about iPod/iPhone and iTunes,
refer also to the instructions supplied with the
iPod/iPhone or visit
2
3
Press BSRC to select AUX.
Turn on the portable audio player and
start playback.
<http://www.apple.com>.
Set the AUX name
3
1
Purchase songs from iTunes Store
Tag the song
While listening to a portable audio player
connected to the unit...
1
2
Connect the iPod/iPhone to the PC.
Synchronize the iPod/iPhone on the
iTunes.
The tagged PSDs are transferred to the PC
and iTunes displays the list of the tagged
songs. After the data transfer is completed,
the stored PSDs are automatically deleted
from the iPod/iPhone.
While receiving a song with PSD (“TAG” lights
up)...
Press and hold J BAND TAG.
“TAG STORED” “MEMORY XX/50” appears
when the song is stored on the unit.
• When pressing and holding J BAND TAG
within 10 seconds before or after the PSD
changes, the tags for two songs are stored.
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM]
,
then press the knob.
3
4
Turn the volume knob to select [AUX NAME
SET], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
AUX (default)/ DVD PORTABLE/ GAME/ VIDEO/ TV
/
5
Press and hold
to exit.
8
Pandora®
Preparation:
To
Do this
Install the latest version of the Pandora application
onto your device (iPhone/ iPod touch), then create
an account and log in to Pandora.
Pause or resume playback
Press 6 IW (or press ENT IW on RC-406).
Thumbs up or thumbs
down
Press J / K
.
• Select [ON] for [PANDORA SRC]
.
(
4)
• If thumbs down is selected, the current track is skipped.
Start listening
Skip a track
Press T (or press T (+) on RC-406).
1
2
Open the Pandora application on your device.
Connect your device to the USB input
terminal.
Create a new station
1
2
Press and hold the volume knob.
Turn the volume knob to select [FROM TRACK] or [FROM
ARTIST], then press the knob.
A new station is created based on the current song or artist.
KCA-iP102 (optional
USB input terminal
accessory) or accessory
cable of the iPod/iPhone
Save a station
Press and hold one of the number buttons (1 to 5) to
*
store.
• To select a stored station, press one of the number buttons
(1 to 5).
and/ or
USB cable from the rear of the unit
Search for a registered
station
1
2
Press
.
Turn the volume knob to make a selection, then press the
knob (or press J/ K on RC-406).
(for KDC-X798
)
[BY DATE]: According to the registered date.
[A-Z]: Alphabetical order.
The source changes to PANDORA/ PANDORA
FRONT/ PANDORA REAR and broadcast starts.
3
Turn the volume knob to the desired station, then press
the knob.
* Do not leave the cable inside the car when not
using.
9
ENGLISH |
iHeartRadio®
Preparation:
To
Do this
Skip cities by alphabetical order
Install the latest version of iHeart Link for
KENWOOD application onto your device (iPhone/
iPod touch), then create an account and log in to
iHeartRadio.
While a city list appears during search...
Pause or
resume
playback
Press 6 IW (or press
ENT IW on RC-406).
1
Turn the volume knob quickly to enter
character search.
Turn the volume knob or press
S / T to select the character to be
searched for.
Press J/ K to move to the previous/
next page.
Press the volume knob to start
searching.
2
• Select [ON] for [IHEART SRC]
.
(
4)
Thumbs up or
thumbs down
for custom
station
Press J / K
.
• If thumbs down is selected,
the current track is
skipped.
Start listening
3
4
1
Open the iHeart Link application on your
device.
Skip a track for
custom station
Press T (or press T (+)
on RC-406).
2
Connect your device to the USB input
terminal.
To cancel, press and hold
.
Create a new/
custom station
Press 1.
KCA-iP102 (optional
accessory) or accessory
cable of the iPod/iPhone
USB input terminal
*
Delete a station
Add to favorite
stations for live
station
Press 2.
While listening to IHEARTRADIO...
1
2
3
4
5
Press the volume knob to enter
and/ or
USB cable from the rear of the unit
[FUNCTION]
.
Scan for live
station
Press 5.
Turn the volume knob to select
[SYSTEM], then press the knob.
Turn the volume knob to select
[STATION DEL], then press the knob.
Turn the volume knob to select [LIVE] or
[CUSTOM], then press the knob.
Turn the volume knob to select the
desired station to delete, then press
the knob.
(for KDC-X798
)
Search for a station
Press
3
Press BSRC to select IHEARTRADIO/ IHEART
FRONT/ IHEART REAR.
Broadcast starts automatically.
1
2
.
Turn the volume knob to select a category,
then press the knob.
Turn the volume knob to the desired
station, then press the knob.
When a city list appears, you can skip cities
in alphabetical order.
(or using RC-406)
Press J/ K to search for a station.
3
* Do not leave the cable inside the car when not
using.
6
7
Turn the volume knob to select [YES],
then press the knob.
Press and hold
to exit.
To return to the previous setting item or
hierarchy, press
.
To cancel, press and hold
.
10
SiriusXM® Radio
Preparation:
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is
selected, a pass code input screen appears. Enter the pass code to receive
the channel.
1
2
3
Connect the optional SiriusXM Vehicle Tuner (commercially
available).
• To change the tuning method for S / T: Press K SEEK.
Each time you press K SEEK, the tuning method switches between
“CHANNEL” (manually search for a channel) and “PRESET” (searches for
a preset channel of the selected band).
• To store a channel of the current band: Press and hold one of the
number buttons (1 to 6).
Antenna
Expansion port on
the rear panel
SiriusXM Vehicle Tuner
• To select a stored channel of the current band: Press one of the
number buttons (1 to 6).
or call 1-866-635-2349.
The Radio ID is required to activate the SiriusXM Vehicle Tuner.
The Radio ID is located on the label of the SiriusXM Vehicle Tuner
and can also be shown on the unit’s display window when you select
“Channel 0” after SiriusXM Vehicle Tuner is connected.
For users in Canada: To activate SiriusXM Canada service go to
corner, or call 1-877-438-9677.
Direct Access Tuning (using RC-406)
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a channel number.
Press S / T (+) to start searching.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning
is automatically canceled.
Press BSRC to select SIRIUS XM to start updating.
Start listening
SiriusXM Replay™
1
2
3
Press BSRC to select SIRIUS XM.
Press J BAND repeatedly to select a band.
Press and hold K SEEK (or press K on RC-406).
Replay starts from the live position and “ ” lights up.
Press
.
“
” lights up.
4
Turn the volume knob to select a category, then press the knob.
If “ALL CHANNELS” is selected, all the available channels will be
shown.
Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
During Replay...
• To pause or resume playback, press 6 IW (or press ENT IW on
RC-406).
5
• To skip the current song backward/forward, press S / T (or
press S / T (+) on RC-406).
• To rewind/fast-forward, press and hold S / T (or press and hold
S / T (+) on RC-406).
• To exit from Replay and go to live, press and hold K SEEK (or press
and hold K on RC-406).
11
ENGLISH |
SiriusXM® Radio
Smart Favorites
1
3
Tag the song
Purchase songs from iTunes Store
User stored channels (1 to 6) of the current
band are recognized as Smart Favorite
channels. SiriusXM Vehicle Tuner automatically
buffered their broadcasting content in the
background.
• Smart Favorite channel is available with
SXV200 or later SiriusXM tuner models.
When listening a song and “TAG” lights up...
1
2
Connect the iPod/iPhone to the PC.
Synchronize the iPod/iPhone on the
iTunes.
The tagged songs are transferred to the PC
and iTunes displays the list of the tagged
songs. After the data transfer is completed,
the stored songs are automatically deleted
from the iPod/iPhone.
Press and hold JBAND TAG.
“TAG STORED” “MEMORY XX/50” appears
when the song is stored on the unit.
• “XX” is the total number of songs you have
tagged.
• Transferring starts automatically if the iPod/
iPhone is connected to the unit when you tag
the song.
When you select a Smart Favorite channel,
you can rewind and replay up to 30 minutes of
any of the missed news, talk, sports or music
content.
SiriusXM settings
2
Transfer the tagged song to your
iPod/iPhone
1
2
Press the volume knob to enter [FUNCTION].
1
Press one of the number buttons (1 to 6)
Turn the volume knob to select [SIRIUS XM]
,
to select a channel.
then press the knob.
Connect the iPod/iPhone to the unit.
The source changes to “USB,” and starts
transferring the tagged songs to the iPod/
iPhone automatically.
• While transferring, “TAG” flashes and “TAG
STORING” appears. When all the tagged songs
are transferred, “TAG TRANSFERD” appears.
• Your iPod/iPhone must have 50 MB free space
which is required for transferring a tagged
song.
• During the transferring process:
– Do not change the source.
– Do not disconnect the iPod/iPhone.
• When the connected iPod/iPhone is not
compatible with iTunes Tagging you cannot
transfer the tagged songs.
2
For operation ( 11, SiriusXM Replay
™)
3
4
Turn the volume knob to make a selection
(
13), then press the knob.
Press and hold to exit.
iTunes Tagging
To return to the previous setting item or
hierarchy, press
You can tag a song when listening to SiriusXM
Radio. And by tagging, you can purchase the
song from iTunes Store. This unit memorizes
up to 50 tags for SiriusXM Radio and HD Radio
content.
.
• To check the number of the tag memory
used,
(
7).
• For the best compatibility of iTunes Tagging,
use the latest software versions with the iPod/
iPhone that can be connected to this unit.
(
20)
• iTunes 7.4 or later version is required.
• For details about iPod/iPhone and iTunes,
refer also to the instructions supplied with the
iPod/iPhone or visit
<http://www.apple.com>.
12
BLUETOOTH®
SiriusXM® Radio
You can operate Bluetooth devices using this unit.
Default: XX
There are two types of lock functions available:
• SiriusXM-defined: When [MATURE CH] is set to [ON]
Connect the microphone
• User-defined: Using [CHANNEL EDIT] when [MATURE CH] is set to [OFF]
MIC (Microphone input terminal)
CHANNEL LOCK
To unlock settings:
Microphone (supplied)
1
2
3
Turn the volume knob to select a number.
Press S / T to move to the entry position.
Repeat steps
(Initial pass code is 0000.)
1
and to enter the current pass code.
2
Rear panel
4
Press the volume knob to confirm.
CODE SET
1
2
3
4
5
Turn the volume knob to select a number.
Press S / T to move to the entry position.
Repeat steps
1
and to enter a new 4-digit pass code.
2
Press the volume knob to confirm.
Repeat steps to to reconfirm the pass code.
1
4
• Make a note of the new pass code to enter channel lock settings from next
time.
Adjust the microphone
angle
Secure using cord clamps (not
supplied) if necessary.
CHANNEL EDIT
*
1
2
Turn the volume knob to select a category, then press the knob.
Turn the volume knob to select a channel you want to lock, then press the
knob.
If you turn off the unit or detach the control panel during a phone call
conversation, the Bluetooth connection is disconnected. Continue the
conversation using your mobile phone.
“L” appears in front of the channel number.
3
Press and hold
to exit.
CHANNEL CLEAR
*
YES: Clears all the locked channels. ; NO: Cancels.
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
MATURE CH
ON: Turns on the SiriusXM-defined lock setting (mature channel). ;
OFF: Turns off.
• If [ON] is selected, your setting [CHANNEL EDIT] is temporary ignored.
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
WEAK
0%
/
GOOD
/
STRONG: Shows the strength of the current received signal.
—
100%
(0): Shows the memory usage for Replay buffer.
YES: Resets stored channel, locked channel setting, Mature CH setting and
TAG memory to default. ; NO: Cancels.
* Displayed only when [MATURE CH] is set to [OFF]
.
13
ENGLISH |
BLUETOOTH®
Pair a Bluetooth device
Bluetooth test mode
When connecting a Bluetooth device to the unit for the first time,
perform pairing between the unit and the device. Once the pairing is
completed, the Bluetooth device will remain registered in the unit even if
you reset the unit.
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1
2
3
Press and hold
.
• Up to five devices can be registered (paired) in total.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
“PLEASE PAIR YOUR PHONE” appears.
Search and select this unit model name (KDC-X7**/ KDC-BT7**HD)
on the Bluetooth device.
Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
• This unit supports Secure Simple Pairing (SSP).
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually. Refer to the
instruction manual of the Bluetooth device for more information.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
1
2
Press BSRC to turn on the unit.
Search and select this unit model name (KDC-X7**/ KDC-BT7**HD)
on the Bluetooth device.
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME
KNOB” scrolls on the display.
PB DL:
Phonebook Access profile (PBAP) compatibility
3
Press the volume knob to start pairing.
To cancel check mode, press and hold BSRC to turn off the unit.
“PAIRING OK” appears when pairing is completed and “ ” will light up
when the Bluetooth connection is established.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
• Pairing request (via Bluetooth) is automatically activated if an iPhone/
iPod touch is connected through the USB input terminal. (Applicable
only if [AUTO PAIRING] is set to [ON].)
(
18)
Press the volume knob to pair once you have confirm the device name.
14
BLUETOOTH®
Bluetooth mobile phone
Improve the sound quality during a call
While talking on the phone...
To
Do this
Press
1
Press the volume knob to enter [FUNCTION].
Receive a call
or the volume knob or one
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
of the number buttons (1 to 6) (or
press on RC-406).
3
Press and hold
to exit.
• All the buttons and display flash
when there is an incoming call.
During a call, the buttons and
display illuminate according to the
To return to the previous setting item or hierarchy, press
.
Default: XX
): The sensitivity of the microphone increases as the number increased.
–10): Adjust the noise reduction level until the least noise is being heard
during a phone conversation.
10 ): Adjust the echo cancellation delay time until the least echo is being heard
during a phone conversation.
MIC GAIN
NR LEVEL
–20 — +
8
(0
settings made for [DISPLAY]
.
(
20)
–5 — –20
(
• When [AUTO ANSWER] is set to the
selected time, the unit answers
ECHO CANCEL
1
—
(4
incoming call automatically.
(
16)
Reject an incoming
call
Press BSRC (or press
RC-406).
on
Text message notification
End a call
Press
RC-406).
or BSRC (or press
on
When the phone receives a text message, the unit rings and “SMS RECEIVED”
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Switch between
hands-free and
private talk modes
Press 6 IW during a call.
• Operations may vary according to
the connected Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a
call.
Use Voice Recognition
1
Press and hold
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding activate the priority
device.
to activate Voice Recognition.
Phone volume: [00] to [35]
(Default: [15]
)
• This adjustment will not affect the
volume of the other sources.
(
17, DVC PRIORITY)
2
Speak the name of the contact you want to call or the voice command to
Switch between two
connected phones
control the phone functions.
Press
repeatedly.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
• Not applicable during a call.
15
ENGLISH |
BLUETOOTH®
VOICE
Speak the name of the contact you want to call or use the voice
Bluetooth mode operations
command to control the phone functions.
(
15, Use Voice
1
2
Press
to enter Bluetooth mode.
Recognition)
Turn the volume knob to make a selection (see the following table),
then press the knob.
BATT*
LOW
NO SIGNAL
received signal.
/
MID
/
FULL: Shows the strength of the battery.
3
Press and hold
to exit.
SIGNAL*
/
LOW MID MAX: Shows the strength of the current
/
/
To return to the previous setting item or hierarchy, press
.
SETTINGS
Default: XX
1
Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the
display to indicate the previous call status.
CALL
HISTORY
AUTO ANSWER
1
—
30: The unit answer incoming call automatically in the selected
time. ; OFF: Cancels.
• Press DISP SCRL to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
Press the volume knob to call.
RING MODE
SYSTEM: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
2
•
•
CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
PHONE
BOOK
1
2
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the knob to
call.
PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
(
18, TRANSFER PB)
SMS NOTIFY*
ON: The unit rings and “SMS RECEIVED” appears to notify you of an
incoming text message. ; OFF: Cancels.
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
* Functionality depends on the type of the phone used.
• If the phonebook contains many contacts,
(
16, Select a contact by
name).
Select a contact by name
NUMBER
DIAL
1
2
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
Press S / T to move the entry position.
Repeat steps and until you finish entering the phone number.
• You can search through the contacts quickly according to the first letter
(A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the first alphabet
does not exist.
1
2
3
Press the volume knob to call.
(or using RC-406)
1
2
Press the number buttons (
Press to call.
0
to 9) to enter the phone number.
16
BLUETOOTH®
1
2
3
Press
to enter Bluetooth mode.
Delete a contact
Turn the volume knob to select [PHONE BOOK], then press the knob.
Turn the volume knob quickly to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other menu
(LMNOPQRSTUV or WXYZ1 ), press J/ K.
Not applicable for mobile phone that supports PBAP.
1
2
Press
to enter Bluetooth mode.
Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], then
press the knob.
4
Turn the volume knob or press S / T to select the desired first
3
Turn the volume knob to select a contact.
If a contact is selected, press the volume knob to show the phone
number.
letter, then press the knob.
• To search with numbers, select “1”.
• To search with symbols, select “ ”.
4
5
Press and hold the volume knob to enter delete mode.
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
5
6
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the
knob to call.
DELETE ONE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
To return to the previous hierarchy, press
.
Store a contact in memory
6
Turn the volume knob to select [YES] or [NO], then press the knob.
You can store up to 6 contacts.
1
Press
to enter Bluetooth mode.
Bluetooth mode settings
2
Turn the volume knob to select [CALL HISTORY] [PHONE BOOK], or
,
1
2
3
Press the volume knob to enter [FUNCTION].
[NUMBER DIAL], then press the knob.
Turn the volume knob to select [BT MODE], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
4
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold
to exit.
Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To return to the previous setting item or hierarchy, press
.
Default: XX
To erase a contact from the preset memory, select [NUMBER DIAL] in
step and store a blank number.
2
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
AUDIO SELECT
DEVICE DELETE
Make a call from memory
1
2
Turn the volume knob to select a device to delete, then press the
knob.
Turn the volume knob to select [YES] or [NO], then press the knob.
1
2
3
Press
to enter Bluetooth mode.
Press one of the number buttons (1 to 6).
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
DVC PRIORITY
Selects a device to be connected as priority device.
“ ” appears in front of the device name set as priority.
17
ENGLISH |
BLUETOOTH®
Internet radio via Bluetooth
Bluetooth audio player
“DL PB
” appears and transfer
TRANSFER PB
*
Operations and display indications may differ
according to their availability on the connected
device.
the phonebook of the connected
phone to this unit manually.
* Selectable only when the connected
phone supports OPP.
Listen to Pandora
Preparation:
Select [ON] for [PANDORA SRC]
.
(
4)
You can listen to Pandora on your smart
phone (Android OS) through Bluetooth on
this unit.
To
Do this
PIN CODE EDIT Changes the PIN code (up to 6 digits).
(0000)
1
Turn the volume knob to select a
number.
Playback
1 Press BSRC (or press
SRC on RC-406) to select
BT AUDIO.
2 Operate the Bluetooth
audio player to start
playback.
1
2
3
Open the Pandora application on your
device.
2
Press S / T to move the
entry position.
Connect to Bluetooth audio player.
Repeat steps
finish entering the PIN code.
1
and until you
2
(
13)
Press BSRC to select PANDORA.
The source switches and broadcast starts
automatically.
3
Press the volume knob to confirm.
Pause or resume
playback
Press 6 IW (or press
ENT IW on RC-406).
RECONNECT
ON: The unit automatically reconnect
when the Bluetooth device is within
range. ; OFF: Cancels.
• You can operate Pandora in the same way
Select group or
folder
Press J/ K (or press AM– /
#FM+ on RC-406).
*
as Pandora for iPod/iPhone.
(
9)
AUTO PAIRING ON: The unit automatically pair
supported Bluetooth device
Reverse/forward
skip
Press S / T (or press
S / T (+) on RC-406).
Listen to iHeartRadio
(iPhone/iPod touch) when it is
connected through USB input
terminal. Depending on the iOS
version of the connected iPhone/iPod
touch, this function may not work. ;
OFF: Cancels.
Preparation:
Select [ON] for [IHEART SRC]
Reverse/fast-
forward
Press and hold S / T (or
press and hold S / T (+)
on RC-406).
.
(
4)
You can listen to iHeartRadio on your smart
phone (Android OS) through Bluetooth on
this unit.
Repeat play
Press 4
make a selection.
ALL REPEAT, FILE REPEAT,
REPEAT OFF
repeatedly to
BT HF/AUDIO
INITIALIZE
FRONT: Ouputs audio from the front
left and right speakers. ; ALL: Outputs
audio from all the speakers.
1
2
3
Open the iHeart Link application on your
smart phone.
Connect your smart phone via Bluetooth
connection.
(
13)
YES: Initializes all the Bluetooth
settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
Random play
Press 3
make a selection.
FOLDER RANDOM,
RANDOM OFF
Press and hold 3
“ALL RANDOM.”
repeatedly to
Press BSRC to select IHEARTRADIO.
The source switches and broadcast starts
automatically.
• You can operate iHeartRadio in the same
way as iHeartRadio for iPod/iPhone.
to select
(
10)
18
AUDIO SETTINGS
While listening to any source...
PRESET EQ
DRIVE EQ
NATURAL
/
/
TOP40
/
POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/
1
2
3
Press the volume knob to enter [FUNCTION].
USER: Selects a preset equalizer suitable to the music genre.
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
(Select [USER] to use the customized bass, middle, and treble settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
BASS BOOST
LOUDNESS
LEVEL1
/
LEVEL2/ LEVEL3: Selects your preferred bass boost level. ;
Repeat step 3 until the desired item is selected or activated.
OFF: Cancels.
4
Press and hold
to exit.
(or using RC-406)
LEVEL1 LEVEL2: Selects your preferred low and high frequencies boost
/
to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
1 Press AUD to enter [AUDIO CONTROL]
.
2 Press J/ K to make a selection, then press ENT IW.
SUBWOOFER
SET
ON: Turns on the subwoofer output. ; OFF: Cancels.
To return to the previous setting item or hierarchy, press
.
LPF
THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
SUBWOOFER
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz
are sent to the subwoofer.
Default: XX
SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.
SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
BASS LEVEL –8 to +8 (+6):
Adjusts the level to memorize for each source. (Before
MID LEVEL
TRE LEVEL
–8 to +8 (+5): making an adjustment, select the source you want to
adjust.)
–8 to +8 (0):
HPF
THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
EQ PRO (for KDC-X798
)
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
BASS ADJUST BASS CTR FRQ
BASS LEVEL
60
–8 to +8
1.25
ON: Turns on the extended bass. ; OFF: Cancels.
0.5 1.0 1.5 2.5KHZ: Selects the center frequency.
–8 to +8 +5): Adjusts the level.
/
80
/
100
+6): Adjusts the level.
1.50 2.00: Adjusts the quality factor.
/
200HZ: Selects the center frequency.
FADER
R15 to F15
(
0
): Adjusts the rear and front speaker output balance.
): Adjusts the left and right speaker output balance.
(
BALANCE
L15 to R15
(0
BASS Q FACTOR 1.00
/
/
/
VOLUME OFFSET –8 to +8 (for AUX) ; –8 to (for other sources): Presets the volume
0
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
(Default:
0)
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
/
/
/
(
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
MID Q FACTOR
0.75
/
1.00
/
/
1.25: Adjusts the quality factor.
15.0 17.5KHZ: Selects the center
(Sound
reconstruction)
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.!
TRE ADJUST TRE CTR FRQ
10.0
/
12.5
/
[SUB-W LEVEL] [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
/
frequency.
–8 to +8
[SUBWOOFER SET] is set to [ON]
.
TRE LEVEL
(
0): Adjusts the level.
19
ENGLISH |
DISPLAY SETTINGS
MORE INFORMATION
General
• This unit can only play the following CDs:
1
Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [DISPLAY], then
press the knob.
.
About KENWOOD Music Editor Light
and KENWOOD Music Control
• This unit supports the PC application KENWOOD Music
Editor Light and Android™ application KENWOOD Music
Control.
• When you play audio files with song data added using
the KENWOOD Music Editor Light or KENWOOD Music
Control, you can search for audio files by Genres, Artists,
Albums, Playlists, and Songs.
2
3
Turn the volume knob to make a selection
(see the following table), then press the knob.
Repeat step 3 until the desired item is selected
or activated.
• Detailed information and notes about the playable audio
files are stated in an online manual on the following web
4
Press and hold
to exit.
To return to the previous setting item or hierarchy,
press
Playable files
• Playable audio file: MP3 (.mp3), WMA (.wma),
AAC (.m4a)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long
file name.
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed
above, playback may be impossible depending on the types
or conditions of media or device.
• KENWOOD Music Editor Light and KENWOOD Music
Control are available on the following web site:
.
Default: XX
COLOR SELECT VARIABLE SCAN
/
COLOR 01
—
COLOR 24
/
About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software versions of
• You cannot operate iPod if “KENWOOD” or “ ” is
displayed on iPod.
USER: Selects your preferred key illumination
color.
You can create your own color (when
[COLOR 01]
selected). The color you have created can be
selected when you select [USER]
—
[COLOR 24] or [USER] is
.
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface or discs that
are dirty.
• Recordable/ReWritable discs that have not been
finalized.
1
2
3
Press and hold the volume knob to enter
the detailed color adjustment.
Press S / T to select the color (
R
/
G/
B) to adjust.
About Pandora
• Pandora is available only in the U.S., Australia and New
Zealand.
• Because Pandora is a third-party service, the
specifications are subject to change without prior notice.
Accordingly, compatibility may be impaired, or some or
all of the services may become unavailable.
• Some functions of Pandora cannot be operated from this
unit.
Turn the volume knob to adjust the level
), then press the knob.
(
0
—
9
• 8 cm CD. Attempting to insert using an adapter may
cause malfunction.
DIMMER
ON: Dims the display and button illumination. ;
OFF: Illuminates according to the
[BRIGHTNESS] settings.
About USB devices
• This unit can play MP3/WMA/AAC/WAV files stored on a
USB mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m
may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is
other than 5 V and exceeds 1 A.
BRIGHTNESS
0
—
31: Selects your preferred brightness
level for display and button illumination.
TEXT SCROLL AUTO ONCE: Selects whether to scroll the
/
• For issues using the application, please contact Pandora
display information automatically, or scroll
only once. ; OFF: Cancels.
20
MORE INFORMATION
TROUBLESHOOTING
About HD Radio™ Technology
Symptom
Remedy
• Program Service Data provides song name, artist,
station ID, and other relevant data streams.
• Adjacent to traditional main stations are HD2/
HD3 Channels, providing new original formats on
the FM dial.
• HD Radio broadcasts deliver crystal clear, CD-like
digital audio quality to consumers.
• iTunes® Tagging provides users the means to
“tag” broadcast radio content for later review and
purchase from the iTunes® Store.
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“PROTECT” appears and no
operations can be done.
Check to be sure the terminals of the speaker wires are insulated properly, then
reset the unit. If this does not solve the problem, consult your nearest service
center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors.
(
2)
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening to • Pull the antenna out all the way.
the radio.
Reset the unit.
(
3)
About iHeartRadio
• iHeartRadio® is a third-party service, therefore the specifications are
subject to change without prior notice. Accordingly, compatibility
may be impaired or some or all of the services may become
unavailable.
• Connect the antenna firmly.
“MEMORY FULL” appears.
“iPod FULL” appears.
“NO TAG FNC” appears.
“TAG ERROR” appears.
“NA FILE” appears.
The tag memory of HD Radio receiver and SiriusXM Vehicle Tuner is full.
• Some iHeartRadio® functionality cannot be operated from this unit.
The connected iPod/iPhone memory is full.
About Bluetooth
• Depending on the Bluetooth version of the device, some Bluetooth
devices may not be able to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following website:
The connected iPod does not support iTunes tagging function.
The unit is unable to complete transferring the tagged information to the iPod.
Make sure the disc contains supported audio files.
(
20)
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
“PLEASE EJECT” appears.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem, consult your nearest service
center.
Disc cannot be ejected.
“READ ERROR” appears.
“NO DEVICE” appears.
Press and hold
M
to forcibly eject the disc. Be careful not to drop the disc when it
3)
is ejected. If this does not solve the problem, reset the unit.
(
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
Connect a USB device, and change the source to USB again.
21
ENGLISH |
TROUBLESHOOTING
Symptom
Remedy
Symptom
Station cannot be
Remedy
“COPY PRO” appears.
“NO MUSIC” appears.
“NA DEVICE” appears.
A copy-protected file is played.
Connect a USB device that contains playable audio files.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
selected.
Connect a supported USB device, and check the
connections.
“CANNOT CREATE”
“CANNOT SAVE”
“DISCONNECTED”
“NO SKIPS”
Custom station name creation is unsuccessful.
Addition to the favorite category failed.
Check the connection to the device.
The skip limit has been reached. Retry later.
No stations are found.
“iPod ERROR” appears.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you
intended them to play.
Playback order is determined when files are recorded.
“NO STATIONS”
“NOT CONNECTED”
“IHEARTLINK UP”
Link to the application is impossible.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Make sure you have installed the latest version of the iHeart
Link for KENWOOD application on your device.
Elapsed playing time is not correct. This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
“PLEASE LOGIN”
You haven’t log in. Log in again.
Broadcast from the station is over.
“STATION NOT
AVAILABLE”
“ADD ERROR”
New station creation is unsuccessful.
“SEARCH ERROR”
“STATION NOT
SELECTED”
No station is selected.
“CHECK DEVICE”
“NO SKIPS”
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
“STREAM ERROR”
“THUMB FAILED”
“TIMED OUT”
Broadcast data is interrupted.
“NO STATIONS”
“STATION LIMIT”
Registration of Thumbs Up/Down has failed.
The request has resulted in time-out.
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your
device.
“CH LOCKED”
The selected channel is locked. Enter the correct pass code to
unlock.
(
13)
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
“CHAN UNSUB”
The selected channel is unsubscribed.
Call 1-866-635-2349 or 1-877-438-9677 to subscribe.
“CONNECT ERROR”
“RATING ERROR”
“LICENSE ERROR”
Communication is unstable.
“CH UNAVAIL”
The selected channel is unavailable.
Registration of thumbs up/thumbs down has failed.
“CHECK ANTENNA”
“CHECK TUNER”
Check the antenna and its connection are in good condition.
You try to access from a country which Pandora is not
deliverable.
Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
22
TROUBLESHOOTING
Symptom
“NO SIGNAL”
Remedy
Symptom
• “NO ENTRY” appears.
Remedy
Make sure the antenna is mounted outside the
vehicle.
There is no registered device connected/found via
Bluetooth.
• “NO PAIR” appears.
“SUBSCRIPTION UPDATED
– PRESS ENTER TO
CONTINUE.”
Your subscription is updated. Press the volume knob
to continue.
“ERROR” appears.
Try the operation again. If “ERROR” appears again,
check if the device supports the function you have
tried.
“WRONG CODE”
Make sure you have entered the correct pass code.
“NO INFO” appears.
Bluetooth device cannot get the contact information.
(
13)
• Search from the Bluetooth device again.
• Reset the unit. 3)
Sound is being
• Reduce the distance between the unit and the
Bluetooth audio player.
• Turn off, then turn on the unit and try to connect
again.
• Other Bluetooth devices might be trying to connect to
the unit.
No Bluetooth device is
detected.
interrupted or skipped
during playback of a
Bluetooth audio player.
(
Pairing cannot be made.
• Make sure you have entered the same PIN code to
both the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again.
(
14)
The connected Bluetooth • Check whether the connected Bluetooth audio
audio player cannot be
controlled.
player supports Audio/Video Remote Control Profile
(AVRCP). (Refer to the instructions of your audio
player.)
“DEVICE FULL” appears.
Echo or noise occurs.
The number of registered devices has reached its
limit. Retry after deleting an unnecessary device.
(
17, DEVICE DELETE)
• Adjust the microphone unit’s position.
• Check the [ECHO CANCEL] setting.
• Disconnect and connect the Bluetooth player again.
(
13)
• “HF ERROR XX” appears.
• “BT ERROR” appears.
Reset the unit and try the operation again. If this does
not solve the problem, consult your nearest service
center.
(
15)
Phone sound quality is
poor.
• Reduce the distance between the unit and the
Bluetooth device.
• Move the car to a place where you can get a better
signal reception.
• Voice calling method is
not successful.
• Use voice calling method in a more quiet
environment.
• “N/A VOICE TAG” appears. • Reduce the distance from the microphone when you
speak the name.
• Make sure the same voice as the registered voice tag
is used.
“NOT SUPPORT” appears.
The connected phone does not support Voice
Recognition feature.
23
ENGLISH |
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative
ground.
• Disconnect the battery’s negative terminal before wiring and
mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the
car chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after
installation.
Do the required wiring.
25)
(
Hook on the top side
Caution
• For safety’s sake, leave wiring and mounting to professionals.
Consult the car audio dealer.
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the
[
wires of speakers to the car chassis or Ground
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
wire (black), or connect them in parallel.
Mount the unit at an angle of less than 30º.
•
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
• If the fuse blows, first make sure the wires are not touching car’s
chassis, then replace the old fuse with one that has the same rating.
Use only the specified screws. Using wrong screws might damage the unit.
Basic procedure
How to remove the unit
1
2
3
Remove the key from the ignition switch, then
disconnect the [ terminal of the car battery.
Connect the wires properly.
1
2
Detach the faceplate.
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
See Wiring connection.
(
25)
Install the unit to your car.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Installing the unit (in-dash mounting).
Connect the [ terminal of the car battery.
4
5
Reset the unit.
(
3)
24
Wiring connection
Rear/ front/ subwoofer output
Part list for installation
MIC (Microphone input terminal)
(
13)
(A) Faceplate
USB cable (for KDC-X798
)
Antenna terminal
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) 11)
(
If no connections are made, do not let the wire
come out from the tab.
(B) Trim plate
White
To front speaker (left)
To front speaker (right)
To rear speaker (left)
White/Black
Light blue/yellow
To the steering wheel remote control
adapter
(Steering remote
control wire)
Gray
Gray/Black
(C) Mounting sleeve
(D) Wiring harness
Green
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Blue/White
Green/Black
(Power control wire)
Purple
To rear speaker (right)
Ignition switch
Purple/Black
Brown
To connect the Kenwood navigation system,
refer your navigations manual.
(Mute control wire)
Car fuse box
Red
(Ignition wire)
(E) Extraction key
Yellow
Blue
(Not used)
Car fuse box
(Battery wire)
(Antenna control
wire)
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
25
SPECIFICATIONS / SPÉCIFICATIONS / ESPECIFICACIONES
FM Frequency Range / Bande de fréquences / Gama de frecuencias
Usable Sensitivity / Sensibilité utilisable / Sensibilidad útil (S/N = 26 dB)
87.9 MHz — 107.9 MHz (200 kHz space / intervalle de / espacio)
9.3 dBf (0.8 μV/75 Ω)
Quieting Sensitivity / Seuil de sensibilité / Sensibilidad de silenciamiento
(DIN S/N = 46 dB)
10.2 dBf (1.13 μV/75 Ω)
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 3 dB)
20 Hz — 20 kHz (HD Radio broadcast / Diffusion HD Radio / Emisión de HD Radio)
30 Hz — 15 kHz (Conventional broadcast / Diffusion conventionnelle / Emisión convencional)
Signal-to-Noise Ratio / Taux de Signal/Bruit / Relación señal a ruido
STEREO 75 dB (HD Radio broadcast / Diffusion HD Radio / Emisión de HD Radio)
MONO 75 dB (Conventional broadcast / Diffusion conventionnelle / Emisión convencional)
Stereo Separation / Séparation stéréo / Separación estéreo (1 kHz)
AM Frequency Range / Bande de fréquences / Gama de frecuencias
45 dB
530 kHz — 1 700 kHz (10 kHz space / intervalle de / espacio)
10 kHz
Channel Space Selection / Sélection de l’intervalle entre les canaux /
Selección de espacio entre canales
Usable Sensitivity / Sensibilité utilisable / Sensibilidad útil (S/N = 20 dB)
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 3 dB)
Signal-to-Noise Ratio / Taux de Signal/Bruit / Relación señal a ruido
28 dBμ (25 μV)
40 Hz — 15 kHz (HD Radio broadcast / Diffusion HD Radio / Emisión de HD Radio)
STEREO 70 dB (HD Radio broadcast / Diffusion HD Radio / Emisión de HD Radio)
Laser Diode / Diode laser / Diodo láser
GaAIAs
Digital Filter / Filtre numérique / Filtro digital (D/A)
8 times over sampling / 8 fois suréchantillonnage / 8 veces sobremuestreo
500 rpm — 200 rpm / 500 t/min. — 200 t/min. / 500 rpm — 200 rpm (CLV)
Below measurable limit / Non mesurables / Por debajo del límite medible
20 Hz — 20 kHz
Spindle Speed / Vitesse de rotation / Velocidad de giro
Wow & Flutter / Pleurage et scintillement / Fluctuación y trémolo
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 1 dB)
Total Harmonic Distortion / Distorsion harmonique totale / Distorsión armónica total
(1 kHz)
0.01 %
i
SPECIFICATIONS / SPÉCIFICATIONS / ESPECIFICACIONES
Signal-to-Noise Ratio / Taux de Signal/Bruit / Relación señal a ruido
(1 kHz)
KDC-X798 : 110 dB
KDC-BT758HD KDC-BT710HD
/
: 105 dB
Dynamic Range / Gamme dynamique / Gama dinámica
Channel Separation / Séparation des canaux / Separación de canales
MP3 Decode / Décodage MP3 / MP3 decodificado
90 dB
85 dB
Compliant with MPEG-1/2 Audio Layer-3 / Compatible avec le format MPEG-1/2 Audio Layer-3 /
Compatible con MPEG-1/2 Audio Layer-3
WMA Decode / Décodeur WMA / WMA decodificado
AAC Decode / Décodeur AAC / AAC decodificado
Compliant with Windows Media Audio / Compatible Windows Media Audio /
Compatible con Windows Media Audio
AAC-LC “.m4a” files / Fichiers AAC-LC “.m4a” / Archivos AAC-LC “.m4a”
USB Standard / Standard USB / Estándar USB
USB 1.1, USB 2.0 (Full speed / Vitesse maximale / Alta velocidad)
File System / Système de fichiers / Sistema de archivos
FAT12/ 16/ 32
DC 5 V 1 A
Maximum Supply Current / Courant d’alimentation maximum /
Corriente de alimentación máxima
MP3 Decode / Décodage MP3 / MP3 decodificado
Compliant with MPEG-1/2 Audio Layer-3 / Compatible avec le format MPEG-1/2 Audio Layer-3 /
Compatible con MPEG-1/2 Audio Layer-3
WMA Decode / Décodeur WMA / WMA decodificado
Compliant with Windows Media Audio / Compatible Windows Media Audio /
Compatible con Windows Media Audio
AAC Decode / Décodeur AAC / AAC decodificado
WAV Decode / Décodeur WAV / WAV decodificado
AAC-LC “.m4a” files / Fichiers AAC-LC “.m4a” / Archivos AAC-LC “.m4a”
Linear-PCM / PCM linéaire / PCM lineal
ii
ENGLISH / FRANÇAIS / ESPAÑOL |
SPECIFICATIONS/ SPÉCIFICATIONS / ESPECIFICACIONES
Version / Version / Versión
Bluetooth Ver.2.1+EDR Certified / Bluetooth Ver.2.1+EDR Certified /
Certificado para Bluetooth Ver.2.1+EDR
Frequency Range / Plage de fréquences / Gama de frecuencias
Output Power / Puissance de sortie / Potencia de salida
2.402 GHz — 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE) Power Class 2 / +4 dBm (MAX), 0 dBm (AVE) Power Class 2 /
Clase de potencia 2 +4 dBm (MÁX), 0 dBm (AVE)
Maximum Communication Range / Portée de communication maximale /
Alcance máximo de comunicación
Line of sight approx. 10 m (32.8 ft) / Ligne de vue approximative 10 m (32,8 pieds) /
En línea recta, aproximadamente 10 m (32,8 pies)
Profile / Profile / Perfil
HFP (Hands-Free Profile / Profile mains libres / Perfil manos libres))
SPP (Serial Port Profile / Profile de port série / Perfil del puerto en serie)
PBAP (Phonebook Access Profile / Profile d’accès au répertoire d’adresses /
Perfil de acceso a la guía telefónica)
OPP (Object Push Profile / Profile de poussée d’objet / Perfil de carga de objetos)
A2DP (Advanced Audio Distribution Profile / Profile de distribution audio avancé /
Perfil Avanzado de Distribución de Audio)
AVRCP (Audio/Video Remote Control Profile / Profile de télécommande audio/vidéo /
Perfil de Control Remoto de Audio/Video)
Maximum Output Power / Puissance de sortie maximum /
Potencia de salida máxima
50 W × 4
Full Bandwidth Power / Pleine Puissance de Largeur de Bande /
Potencia en todo el ancho de banda
22 W × 4 (at less than 1 % THD / avec moins de 1 % DHT / a menos del 1 % THD)
4 Ω — 8 Ω
Speaker Impedance / Impédance d’enceinte / Impedancia del altavoz
Tone Action / Action en tonalité / Acción tonal
Bass / Graves / Graves
200 Hz 8 dB
2.5 kHz 8 dB
12.5 kHz 8 dB
Middle / Médiums / Registro medio
Treble / Aiguës / Agudos
Preout Level/Load / Niveau de préamplification/charge /
Nivel de salida de preamplificador/carga (CD)
KDC-X798 : 4 000 mV/ 10 kΩ
KDC-BT758HD KDC-BT710HD
/
: 2 500 mV/ 10 kΩ
Preout Impedance / Impédance du préamplificateur /
Impedancia de salida de preamplificador
≤ 600 Ω
iii
SPECIFICATIONS / SPÉCIFICATIONS / ESPECIFICACIONES
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 3 dB)
Input Maximum Voltage / Tension maximum d’entrée / Voltaje de entrada máximo
Input Impedance / Impédance d’entrée / Impedancia de entrada
20 Hz — 20 kHz
1 200 mV
30 kΩ
Operating Voltage / Tension de fonctionnement / Voltaje de trabajo
14.4 V (10.5 V — 16 V allowable / admissible / admisibles)
10 A
Maximum Current Consumption / Consommation de courant maximale /
Consumo de corriente máxima
Operational Temperature Range / Plage de températures de fonctionnement /
Gama de temperaturas de funcionamiento
0°C — +40°C
Installation Size / Dimensions d’installation / Tamaño de instalación
(W × H × D)
182 mm × 53 mm × 159 mm
(7-3/16" × 2-1/8" × 6-1/4")
Weight / Poids / Peso
KDC-X798 : 1.4 kg (3.1 lbs)
KDC-BT710HD
KDC-BT758HD
/
: 1.3 kg (2.9 lbs)
Subject to change without notice. / Sujet à changement sans notification. / Sujeto a cambios sin previo aviso.
iv
ENGLISH / FRANÇAIS / ESPAÑOL |
CAUTION
Información acerca de la eliminación de equipos eléctricos y electrónicos al final
de la vida útil (aplicable a los países que hayan adoptado sistemas independientes
de recogida de residuos)
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside
the product relating to laser product safety.
Los productos con el símbolo de un contenedor con ruedas tachado no
podrán ser desechados como residuos domésticos. Los equipos eléctricos y
electrónicos al final de la vida útil, deberán ser reciclados en instalaciones
que puedan dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase en contacto con su
administración local para obtener información sobre el punto de recogida
más cercano. Un tratamiento correcto del reciclaje y la eliminación de
residuos ayuda a conservar los recursos y evita al mismo tiempo efectos
perjudiciales en la salud y el medio ambiente.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
Informação sobre a eliminação de pilhas
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada
ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou
importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos
naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio
ambiente.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
v
IC (Industry Canada) Notice
CAUTION
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The term “IC: ” before the certification/ registration number only signifies that the Industry
Canada technical specification were met.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Note de IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulement
que les specifications techniques d’Industrie Canada ont été respectées.
ATTENTION
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant,
cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et
chevilles). Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Para cumplimiento de la COFETEL:
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada”
• Contains Bluetooth ModuleFCC ID: XQN-BTR60X
• Contains Bluetooth ModuleIC: 9688A-BTR601
vi
• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of
iBiquity Digital Corp.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and other countries. Such marks are used under license.
• Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.
• Android is trademark of Google Inc.
• The “AAC” logo is a trademark of Dolby Laboratories.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and
trade names are those of their respective owners.
|