Psc Linear Imager 7000 User Manual

PowerScan 7000

Linear Imager

Product Reference Guide

Table of Contents

About This Manual ............................................................................ 1-1

Manual Conventions .................................................................... 1-2

Connecting the Scanner ..................................................................... 1-2

Programming ............................................................................. 1-4

Resetting the Standard Product Defaults .............................................. 1-4

Double Read Timeout ........................................................................ 2-1

Powerdown Timeout .......................................................................... 2-3

LED and Beeper Indicators ................................................................. 2-5

Power On Alert ........................................................................... 2-5

Good Read: When to Indicate ....................................................... 2-6

Good Read Beep Control .............................................................. 2-7

Good Read Beep Frequency ......................................................... 2-8

Good Read Beep Length .............................................................. 2-9

Good Read Beep Volume ........................................................... 2-11

Scanning Features .......................................................................... 2-12

Scan Mode .............................................................................. 2-12

Active Scanning Time ................................................................ 2-14

Laser Pointer Control ................................................................ 2-16

Interface Selection ............................................................................ 3-4

Interface Features ............................................................................ 3-8

Global Interface Features ............................................................ 3-9

RS-232 Interface Features ......................................................... 3-10

Hardware Flow Contro l ......................................................... 3-14

Intercharacter Delay............................................................ 3-14

Software Flow Contro l .......................................................... 3-14

Host Echo .......................................................................... 3-18

Host Echo Quiet Interval ...................................................... 3-18

Signal Voltage: Normal/TT L .................................................. 3-18

RS-232 Invert..................................................................... 3-18

Beep on ASCII BE L .............................................................. 3-21

Beep on Not on File ............................................................. 3-21

ACK NAK Options ................................................................ 3-22

ACK Character .................................................................... 3-24

NAK Characte r .................................................................... 3-25

Retry on ACK NAK Timeou t ................................................... 3-26

ACK NAK Timeout Valu e ....................................................... 3-27

ACK NAK Retry Count .......................................................... 3-28

ACK NAK Error Handling ............................................................ 3-29

Transmission Failure Indication ............................................. 3-30

IBM-USB Interface Features ....................................................... 3-31

IBM-USB Device usage......................................................... 3-31

IBM ........................................................................................ 3-32

IBM Transmit Labels in Code 39 Format ................................. 3-32

Wand Emulation ....................................................................... 3-33

Supported Symbologies ....................................................... 3-33

Wand Emulation Bar Code Format ......................................... 3-33

Bar/Space Polarity............................................................... 3-34

Product Reference Guide

Wand Idle State ..................................................................3 -34

Signal Speed.......................................................................3 -36

Transmit Leading Noise ........................................................3 -37

Symbology Conversion .........................................................3 -38

Keyboard Wedge/USB Keyboard ..................................................3 -40

Data Editing Overview .......................................................................4-1

Please Keep In Mind... .................................................................4-2

Global Prefix/Suffix ............................................................................4-2

AIM ID .............................................................................................4-5

Label ID ...........................................................................................4-7

Case Conversion .......................................................................4 -14

Character Conversion ................................................................4 -15

UPC-A ..............................................................................................5-2

Disable/Enable UPC-A ..................................................................5-2

Check Digit Transmission .............................................................5-2

Expand UPC-A to EAN-13 .............................................................5-2

System Number Transmission .......................................................5-2

UPC-A Minimum Reads ................................................................5-5

In-store Minimum Reads ..............................................................5-6

UPC-E ..............................................................................................5-8

Disable/Enable UPC-E ..................................................................5-8

Check Digit Transmission .............................................................5-8

System Number ..........................................................................5-8

Expand to UPC-E to UPC-A ...........................................................5-8

Expand UPC-E to EAN13 ..............................................................5-8

Minimum Reads ........................................................................5 -11

GTIN .......................................................................................5 -12

Disable/Enable GTIN ..................................................................5 -12

EAN-13 ..........................................................................................5 -13

Disable/Enable EAN-13 ..............................................................5 -13

Check Digit Transmission ...........................................................5 -13

EAN-13 Flag 1 Character ............................................................5 -13

ISBN .......................................................................................5 -13

Minimum Reads ........................................................................5 -16

EAN-8 ............................................................................................5 -17

Disable/Enable EAN-8 ................................................................5 -17

Check Digit Transmission ...........................................................5 -17

Minimum Reads ........................................................................5 -19

Add-ons .........................................................................................5 -20

RSS-14 ..........................................................................................5 -22

Disable/Enable RSS-14 ..............................................................5 -22

UCC/EAN 128 Emulation ............................................................5 -22

RSS-14 — continued .................................................................5 -24

Minimum Reads ........................................................................5-24

RSS Expanded ................................................................................5-25

Disable/Enable RSS Expanded ....................................................5-25

UCC/EAN 128 Emulation ............................................................5-25

RSS Expanded — continued ........................................................5-26

Length Control ..........................................................................5-26

RSS Expanded — continued ........................................................5-28

RSS Expanded Length 1, Length 2 Programming Instructions ..........5-28

Minimum Reads ........................................................................5-29

PowerScan 7000

Code 39 ........................................................................................ 5-30

Disable/Enable Code 39 ............................................................. 5-30

Check Character Calculation ....................................................... 5-30

Check Character Transmit .......................................................... 5-30

Start/Stop Characters ............................................................... 5-30

Code 39 Full ASCII ................................................................... 5-30

Length Control ......................................................................... 5-33

Code 39 Length 1, Length 2 Programming Instructions .................. 5-35

Quiet Zones........................................................................ 5-36

Code 39 Stitching ..................................................................... 5-37

Code 39 — continued ................................................................ 5-38

Minimum Reads ........................................................................ 5-38

Pharmacode 39 .............................................................................. 5-39

Disable/Enable Pharmacode 39 ................................................... 5-39

Start/Stop Characters ............................................................... 5-40

Check Character Transmit .......................................................... 5-40

Code 128 ....................................................................................... 5-41

Disable/Enable Code 128 ........................................................... 5-41

Transmit Function Characters ..................................................... 5-42

Length Control ......................................................................... 5-43

Code 128 — continued .............................................................. 5-45

Code 128 Length 1, Length 2 Programming Instructions ................ 5-45

Code 128 Stitching ................................................................... 5-46

Code 128 — continued .............................................................. 5-47

Minimum Reads ........................................................................ 5-47

Interleaved 2 of 5 ........................................................................... 5-48

Disable/Enable Interleaved 2 of 5 ............................................... 5-48

Check Digit Calculation .............................................................. 5-48

Check Digit Transmit ................................................................. 5-48

Length Control ......................................................................... 5-50

Interleaved 2 of 5 — continued .................................................. 5-52

Interleaved 2 of 5 Length 1, Length 2 Programming Instructions .... 5-52

Interleaved 2 of 5 — continued .................................................. 5-52

Interleaved 2 of 5 Stitching ....................................................... 5-53

Minimum Reads ........................................................................ 5-54

Codabar ........................................................................................ 5-55

Disable/Enable Codabar ............................................................ 5-55

Check Character Verification ...................................................... 5-55

Check Character Transmit .......................................................... 5-55

Length Control ......................................................................... 5-57

Codabar — continued ................................................................ 5-59

Codabar Length 1, Length 2 Programming Instructions .................. 5-59

Quiet Zones........................................................................ 5-60

Start/Stop Character Type ......................................................... 5-61

Start/Stop Character Transmission ............................................. 5-61

Start/Stop Character Match ....................................................... 5-61

Codabar — continued ...................................................................... 5-64

Codabar Stitching ..................................................................... 5-64

Minimum Reads ........................................................................ 5-65

Code 93 ........................................................................................ 5-66

Disable/Enable Code 93 ............................................................. 5-66

Length Control ......................................................................... 5-67

Product Reference Guide

iii

Code 93 Length 1, Length 2 Programming Instructions ..................5 -69

Code 93 Stitching ......................................................................5 -70

Minimum Reads ........................................................................5 -71

MSI/Plessey ...................................................................................5 -72

Disable/Enable MSI/Plessey ........................................................5 -72

Check Digit Verification ..............................................................5 -72

Check Digit Transmit .................................................................5 -72

Length Control ..........................................................................5 -75

MSI/Plessey Length 1, Length 2 Programming Instructions .............5 -77

Scan the END bar code. .............................................................5 -77

MSI/Plessey Stitching ................................................................5 -78

MSI/Plessey — continued ...........................................................5 -79

Minimum Reads ........................................................................5 -79

Standard 2 of 5 ...............................................................................5 -80

Disable/Enable Standard 2 of 5 ...................................................5 -80

Check Digit Verification ..............................................................5 -80

Check Digit Transmit .................................................................5 -80

Length Control ..........................................................................5 -82

Standard 2 of 5 Length 1, Length 2 Programming Instructions ........5 -84

Standard 2 of 5 Stitching ...........................................................5 -85

Minimum Reads ........................................................................5 -86

PDF 417 .........................................................................................5 -87

Disable/Enable PDF 417 .............................................................5 -87

Length Control ..........................................................................5 -88

PDF 417 — continued ................................................................5 -90

PDF 417 Length 1, Length 2 Programming Instructions ..................5 -90

Minimum Reads ........................................................................5 -91

Optical and Read Performance Parameters ........................................... A-1

Physical Properties ........................................................................... A-2

Electrical Parameters ........................................................................ A-2

Environmental Parameters ................................................................. A-3

Other Parameters ............................................................................. A-3

Standard Cable Pinouts (Primary Interface Cables) ............................... B-1

RS-232 ..................................................................................... B-1

IBM Port 5B/9B/17 ..................................................................... B-1

IBM USB ................................................................................... B-2

USB & USB Keyboard .................................................................. B-2

Wand Emulation ........................................................................ B-2

Keyboard Wedge ........................................................................ B-3

Defaults by Symbology ..................................................................... D-1

Interface Default Exceptions .............................................................. D-2

IBM Interfaces ........................................................................... D-2

RS-232 Wincor/Nixdorf ............................................................... D-3

Keyboards ................................................................................. D-4

Keyboard Model Cross Reference .........................................................E-1

Accepting RS-232 Commands .............................................................F-1

PowerScan 7000

Chapter 1

Getting Started

The PowerScan 7000 Linear Imager marks a new performance level for

handheld scanners. It delivers aggressive read rates and depths of field on

1D and stacked codes. This aggressiveness applies even in challenging

reading environments where low lighting conditions and poor quality

might make it difficult to read bar codes. You can rest assured your

investment will continue to supply years of use by reading any bar codes

you require, now or in the future.

Designed for today’s demanding commercial and industrial environ-

ments, the scanner offers superior image quality, speed, durability, and

the ability to read poor quality bar codes. The unit is comfortable to

hold, easy to use, rugged, and excellent for the most demanding applica-

tions.

About This Manual

This Product Reference Guide (PRG) provides programming instruc-

tions for the scanner, plus product specifications and dimensions. For

installation, maintenance, troubleshooting and warranty information,

see the Quick Reference Guide (QRG). Copies of other publications for

this product are downloadable free of charge from the PSC website listed

on the back cover of this manual.

The scanner is factory programmed for the most common terminal and

communications settings. If you need to change these settings, program-

ming is accomplished by scanning the bar codes in this guide.

Bold text and a yellow-highlighted background indicates the most com-

mon default setting for a feature/option.

Product Reference Guide

1-1

Getting Started

Manual Conventions

The symbols listed below are used in this manual to notify the reader of

key issues or procedures that must be observed when using the scanner:

Notes contain information necessary for prop-

erly diagnosing, repairing and operating the

scanner.

NOTE

The CAUTION symbol advises you of actions

that could damage equipment or property.

CAUTION

Connecting the Scanner

Use the appropriate instructions below to connect the scanner to the ter-

minal, PC or other host device. The scanner kit you ordered to match

your interface should provide a compatible cable for your installation.

The scanner cable connection is secured using the “clamshell” retainer

referenced in the enlarged area of Figure 1. Fit and clamp the retainer

over the cable connector as shown in the illustration, then fully seat the

cable assembly into the scanner, aligning both the connector and the

retainer boss with their respective openings. Secure the captive screws.

Upon completing the connection via the appropriate interface instruc-

tions below, proceed to the Interface Related Features section of this man-

ual and scan the bar code to select the correct interface type.

RS-232 Serial Connection — Turn off power to the terminal/PC

and connect the scanner to the terminal/PC serial port via the RS-232

cable as shown in Figure 1. If the terminal will not support POT (Power

Off the Terminal) to supply scanner power, use the approved power sup-

ply (AC Adapter). Plug the AC Adapter barrel connector into the socket

on the RS-232 cable connector and the AC Adapter plug into a standard

power outlet.

1-2

PowerScan 7000 Linear Imager

Connecting the Scanner

Figure 1. RS-232 Serial Connection

Cable Connector

Retainer Boss

Captive

Screws

USB Connection — Connect the scanner to a USB port on the termi-

nal/PC using the correct USB cable for the interface type you ordered.

Reference Figure 2.

Figure 2. USB Connection

or...

Product Reference Guide

1-3

Getting Started

Wand Emulation Connection — Connect the scanner to the appro-

priated port on the terminal/PC using the correct cable for the interface

type you ordered. Reference Figure 2.

IBM Connection — Connect the scanner to the IBM port on the ter-

minal/PC using the correct IBM cable. Reference Figure 2.

Keyboard Wedge Connection — The Keyboard Wedge cable has a

‘Y’ connection from the scanner. Connect the female to the male end

from the keyboard and the remaining end at the keyboard port at the

terminal/PC. Reference Figure 2.

Programming

The scanner is typically factory-configured with a set of default features

standard to the interface type you ordered. After scanning the interface

bar code from the Interface Related Features section, you can select other

options and customize your scanner through use of the instructions and

programming bar codes available in that section and also the Data Editing

and Symbologies chapters of this manual.

Resetting the Standard Product

Defaults

If you aren’t sure what programming options are in your scanner, or

you’ve changed some options and want the factory settings restored, scan

the Standard Product Default Settings bar code below. This will copy the

factory configuration for the currently active interface to the current

configuration.

Standard Product Default Settings

The programming section lists the factory default settings for each of the

menu commands (indicated by shaded blocks and bold text) on the fol-

lowing pages.

1-4

PowerScan 7000 Linear Imager

Chapter 2

General Features

Double Read Timeout

The Double Read Timeout feature sets a time limit that determines how much time

must pass before reading the same label again (e.g. two identical items in succes-

sion).

START

DURATION

BARCODE

0.1 Second

0.2 Second

0.3 Second

0.4 Second

Product Reference Guide

2-1

General Features

Double Read Timeout — continued

START

DURATION

BARCODE

0.5 Second

0.6 Second

0.7 Second

0.8 Second

0.9 Second

1 Second

END

2-2

PowerScan 7000 Linear Imager

Powerdown Timeout

The Powerdown Timeout feature sets the time for automatically switching the unit off

when the scanner is not in use.

START

DURATION

BARCODE

Disable

5 Seconds

15 Seconds

30 Seconds

1 Minute

2 Minutes

Product Reference Guide

2-3

General Features

Powerdown Timeout — continued

START

DURATION

3 Minutes

BARCODE

4 Minutes

END

2-4

PowerScan 7000 Linear Imager

LED and Beeper Indicators

Power On Alert

Disables or enables the indication (from the Beeper) that the scanner is

receiving power.

START

STATE

BARCODE

Disable

Enable

END

Product Reference Guide

2-5

General Features

Good Read: When to Indicate

This feature specifies when the scanner will provide indication (beep

and/or flash its green LED) upon successfully reading a bar code.

Choices are:

•

Good Read = Indicate after decode

Good Read = Indicate after transmit

Good Read = Indicate after CTS goes inactive, then active

This option, which uses CTS, is only valid for RS-232

interfaces.

NOTE

START

INDICATE

BARCODE

After decode

After transmit

After CTS goes

inactive, then

active

END

2-6

PowerScan 7000 Linear Imager

LED and Beeper Indicators

Good Read Beep Control

This feature enables/disables the scanner’s ability to beep upon a success-

ful decode of a bar code.

START

STATE

BARCODE

Disable

Enable

END

Product Reference Guide

2-7

General Features

Good Read Beep Frequency

Adjusts the good read beep to sound at a selectable low, medium or high

frequency, selectable from the list below. (Controls the beeper’s pitch/

tone.)

START

FREQUENCY

Low

BARCODE

Medium

High

END

2-8

PowerScan 7000 Linear Imager

LED and Beeper Indicators

Good Read Beep Length

Specifies the duration of a good read beep.

START

LENGTH

BARCODE

60msec

80msec

100msec

120msec

140msec

160msec

Product Reference Guide

2-9

General Features

Good Read Beep Length — continued

START

LENGTH

BARCODE

180msec

200msec

END

2-10

PowerScan 7000 Linear Imager

LED and Beeper Indicators

Good Read Beep Volume

Selects the beeper volume (loudness) upon a good read beep. There are

three selectable volume levels.

START

VOLUME

BARCODE

Low

Medium

High

END

Product Reference Guide

2-11

General Features

Scanning Features

Scan Mode

Selects the scan operating mode for the scanner. Selections are:

•

Single — When the trigger is pulled, scanning is activated until

five seconds have elapsed or a bar code has been read or the trigger

is released

•

Triggerless — When the trigger is pulled, scanning is activated

until any of the following occur:

- Active Scanning Time has expired

- a bar code has been read

- the trigger is pulled a second time

The Double Read Timeout feature gates double reads while in this

mode.

•

Stand — No trigger pull is required to read a bar code while in this

mode. Scanning is turned on automatically (auto-sense) when an

item is placed in the scanner's field of view and is turned off again

when a bar code is read or Active Scanning Time has expired. The

Double Read Timeout feature gates double reads while in this mode.

If the trigger is pulled, the scanner acts as if it is in single read

mode.

Upon exiting Single Read mode while Stand Mode

is enabled, the software will delay 2 seconds

before beginning its auto-sense operation.

NOTE

•

Stand With Illumination — Same as the option above, except that

illumination is on while in this mode.

2-12

PowerScan 7000 Linear Imager

Scanning Features

Scan Mode — continued

START

MODE

BARCODE

Single

Triggerless

Stand

Stand w/Illum

END

Product Reference Guide

2-13

General Features

Active Scanning Time

This setting determines the amount of time the scanner continues to

scan in triggerless or stand mode (see Scan Mode) once scanning has been

activated.

START

DURATION

BARCODE

1 Second

2 Seconds

5 Seconds

15 Seconds

30 Seconds

1 Minute

2-14

PowerScan 7000 Linear Imager

Scanning Features

Active Scanning Time — continued

START

DURATION

BARCODE

2 Minutes

3 Minutes

4 Minutes

END

Product Reference Guide

2-15

General Features

Laser Pointer Control

The Laser Pointer is a value-added option which

might not have been included when your scan-

ner was ordered.

NOTE

When the trigger is pressed and Scan Mode is set to Single, the laser

pointer will be activated for the time period configured by this feature.

Immediately following this, the scanner will start scanning. Disabling

this feature turns the pointer off.

START

DURATION

BARCODE

Disable

0.1 Seconds

0.2 Seconds

0.3 Seconds

0.4 Seconds

2-16

PowerScan 7000 Linear Imager

Scanning Features

Laser Pointer Control — continued

START

DURATION

BARCODE

0.5 Seconds

0.6 Seconds

0.8 Seconds

1 Second

1.2 Seconds

1.5 Seconds

Product Reference Guide

2-17

General Features

Laser Pointer Control — continued

START

DURATION

BARCODE

2 Seconds

2.5 Seconds

END

2-18

PowerScan 7000 Linear Imager

Chapter 3

Interface Related

Features

At the time of this writing, the Scanner supports the interfaces listed in

Table 3-1. Select the desired interface type from the table, then reference

the page number given for the customizable features section associated

with each interface. See Table 3-2 for a description of each Keyboard

Wedge interface type (A through Z as listed).

Product Reference Guide

3-1

Interface Related Features

Table 3-1. Interfaces Supported

RS-232

Page Keyboard Wedge

Page

RS-232 Standard

3-10

Keyboard Wedge H

RS-232 Wincor-Nixdorf

3-40

Keyboard Wedge I

IBM

Keyboard Wedge J

Keyboard Wedge K

IBM 4683 Port 5B

IBM 4683 Port 9B

IBM 4683 Port 17

3-31

Keyboard Wedge L

Keyboard Wedge M

USB

IBM USB

USB Keyboard

Wand Emulation

Keyboard Wedge

Keyboard Wedge R

Keyboard Wedge A

Keyboard Wedge S

Keyboard Wedge B

Keyboard Wedge T

Keyboard Wedge C

Keyboard Wedge D

Keyboard Wedge U

Keyboard Wedge V

Keyboard Wedge E

Keyboard Wedge W

Keyboard Wedge F

Keyboard Wedge X

Keyboard Wedge G

a. Consult Table 3-2 for more information regarding keyboard wedge inter-

face types.

The correct interface cable is included for the scanner

interface type you ordered.

NOTE

3-2

PowerScan 7000 Linear Imager

Table 3-2. Keyboard Wedge Interface Reference

I/F Type

PCs Supported

PC/XT w/Alternate Key Encoding

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key

Encoding

PS/2 25 and 30 w/Alternate Key Encoding

PC/XT w/Standard Key Encoding

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key

Encoding

PS/2 25 and 30 w/Standard Key Encoding

IBM 3xxx w/122 keyboard

IBM 3xxx w/102 keyboard

PS/55 5530T w/104 keyboard

NEC 9801

WYSE 30/30+ WY-30 Keyboard 83 Keys

WYSE 60/85/99 GT/150/160/285 Style IBM Enhanced PC, 520/520ES

Style IBM Enhanced PC FR

WYSE 55/65/65 ES/120/185/325 Style IBM Enhanced PC

WYSE 60/85/99 GT/150/160/285 ANSI Keyboard 105 Keys, 520/520 ES

ANSI Keyboard 105 Keys

WYSE 55/65/65 ES/120/185/325 ANSI Keyboard 105 Keys

WYSE 60/85/99 GT/150/160/285 ASCII Kbd, 520/520 ES ASCII Kbd

WYSE 55/65/65 ES/120/185/325 ASCII Keyboard

WYSE 60/85/99 GT/150/160/285 ANSI W285 Keyboard 105 Keys, 520/

520 ES ANSI W285 Keyboard 105 Keys

WYSE 55/65/65 ES/120/185/325 ANSI W285 Keyboard 105 Keys

WYSE WINTERM 3320 SE

IBM 3153

IBM 316X, 3179/3180/319X/3270

IBM 3151/3152-010, 347X/348X

DIGITAL VT 220/320/330/340/350/382

DIGITAL VT420

DIGITAL VT 510/520 IBM ANSI Style Keyboard

DIGITAL VT 510/520 IBM PC Style Keyboard

SUN SPARC 5/10

SUN 420/440, ITX

Reference Appendix E, Keyboard Function Key Map-

pings for more information about keyboards.

NOTE

Product Reference Guide

3-3

Interface Related Features

Interface Selection

START

INTERFACE

BARCODE

RS-232

Standard

RS-232

Wincor-Nixdorf

IBM 4683

Port 5B

IBM 4683

Port 9B

IBM 4683

Port 17

IBM USB

USB Keyboard

3-4

PowerScan 7000 Linear Imager

Interface Selection

Interface Selection — cont.

START

INTERFACE

BARCODE

Keyboard

Wedge A

Keyboard

Wedge B

Keyboard

Wedge C

Keyboard

Wedge D

Keyboard

Wedge E

Keyboard

Wedge F

Keyboard

Wedge G

Product Reference Guide

3-5

Interface Related Features

Interface Selection — cont.

START

INTERFACE

BARCODE

Keyboard

Wedge H

Keyboard

Wedge I

Keyboard

Wedge J

Keyboard

Wedge K

Keyboard

Wedge L

Keyboard

Wedge M

Keyboard

Wedge N

3-6

PowerScan 7000 Linear Imager

Interface Selection

Interface Selection — cont.

START

INTERFACE

BARCODE

Keyboard

Wedge O

Keyboard

Wedge P

Keyboard

Wedge Q

Keyboard

Wedge R

Keyboard

Wedge S

Keyboard

Wedge T

Product Reference Guide

3-7

Interface Related Features

Interface Selection — cont.

START

INTERFACE

BARCODE

Keyboard

Wedge U

Keyboard

Wedge V

Keyboard

Wedge W

Keyboard

Wedge X

Wand

Emulation

END

Interface Features

3-8

PowerScan 7000 Linear Imager

Interface Features

Global Interface Features

START

STATE

BARCODE

Obey Host

Commands

Ignore Host

Commands

Host

Transmission

Buffers = 1

Host

Transmission

Buffers = 2

END

Product Reference Guide

3-9

Interface Related Features

RS-232 Interface Features

START

BAUD RATE

BARCODE

1200 Baud

2400 Baud

4800 Baud

9600 Baud

19200 Baud

38400 Baud

3-10

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

BAUD RATE

BARCODE

57600 Baud

115200 Baud

END

Product Reference Guide

3-11

Interface Related Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

7 Data Bits

8 Data Bits

1 Stop Bit

2 Stop Bits

Parity = None

3-12

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Parity = Even

Parity = Odd

END

Product Reference Guide

3-13

Interface Related Features

RS-232 Interface Features — cont.

Hardware Flow Control

Disable Hardware Control — The scanner transmits to the host regardless of

any activity on the CTS line.

Enable CTS Flow Control — The CTS signal controls transmission of data

to the host.

Enable CTS Scan Control — The CTS line must be active for the scanner to

read and transmit data. While the CTS line is inactive, the scanner

remains in a host-disabled state; following a successful label transmis-

sion, the CTS signal must transition to inactive and then to active to

enable scanning for the next label.

Intercharacter Delay

This delay is inserted after each data character transmitted. If the trans-

mission speed is too high, the system may not be able to receive all char-

acters. You may need to adjust the delay to make the system work

properly.

Software Flow Control

Disables/Enables software control using XON/XOFF characters.

3-14

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Disable

Hardware

Control

Enable CTS

Flow Control

Enable CTS

Scan Control

Inter-Char

Delay = No

Delay

Interchar Delay

= 10 msec

Interchar Delay

= 20 msec

Product Reference Guide

3-15

Interface Related Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Interchar Delay

= 30 msec

Interchar Delay

= 40 msec

Interchar Delay

= 50 msec

Interchar Delay

= 60 msec

Interchar Delay

= 70 msec

Interchar Delay

= 80 msec

3-16

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Interchar Delay

= 90 msec

Disable

Software Flow

Control

Enable

Software Flow

Control

END

Product Reference Guide

3-17

Interface Related Features

RS-232 Interface Features — cont.

Host Echo

When enabled, this feature passes all data through the scanner to the

host as it comes in. This feature is used for applications where “daisy

chaining” of RS-232 devices onto the same cable is necessary. If, for

example, one of the devices in the chain is a terminal where someone is

entering data while another person is simultaneously scanning a bar code

requiring transmission to the host, the scanner will wait for the RS-232

channel to be quiet for a specified period of time (set via RS-232 Host Echo

Quiet Interval). The scanner can be set to observe this delay before send-

ing its data in order to avoid RS-232 transmission conflicts.

Host Echo Quiet Interval

This setting specifies the time interval of RS-232 channel inactivity

which must transpire before the scanner will break the host echo loop to

transmit the bar code data that has just been scanned to the host.

Signal Voltage: Normal/TTL

Specifies whether the RS-232 interface provides TTL levels on the out-

put pins TxD and RTS.

RS-232 Invert

Enables/disables inversion of RS-232 TXD and RXD signals.

3-18

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Disable Host

Echo

Enable Host

Echo

Host Echo

Quiet Interval

= 0msec

Host Echo

Quiet Interval

= 10msec

Host Echo

Quiet Interval

= 20msec

Host Echo

Quiet Interval

= 30msec

Product Reference Guide

3-19

Interface Related Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Host Echo

Quiet Interval

= 40msec

Host Echo

Quiet Interval

= 50msec

Host Echo

Quiet Interval

= 60msec

Host Echo

Quiet Interval

= 70msec

Host Echo

Quiet Interval

=80msec

Host Echo

Quiet Interval

= 90msec

Host Echo

Quiet Interval

= 100msec

3-20

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

START

STATE

BARCODE

Signal

Voltage:

Normal RS-232

Signal Voltage:

TTL

Disable

RS-232 Invert

Enable RS-232

Invert

END

Beep on ASCII BEL

Enables/disables ability of scanner to beep (sound a good read tone) on

receiving an ASCII BEL (07 hex).

Beep on Not on File

Select for the host to beep (or not) when a not-on-file (host command)

condition is detected by the host.

Product Reference Guide

3-21

Interface Related Features

ACK NAK Options

This enables/disables the ability of the scanner to support the RS-232

ACK/NAK protocol. When configured, the scanner and/or host sends

an “ACK” when it receives data properly, and sends “NAK” when the

data is in error. Selections for this option are:

•

Disable

Enable for label transmission — the scanner expects an ACK/NAK

response from the host when a label is sent

•

Enable for host-command acknowledge — the scanner will

respond with ACK/NAK when the host sends a command

Enable for label transmission and host-command acknowledge

START

STATE

BARCODE

Enable Beep

on ASCII BEL

Disable Beep

on ASCII BEL

Disable Beep

on Not On File

Enable Beep

on Not On File

3-22

PowerScan 7000 Linear Imager

Interface Features

ACK NAK Options — cont.

START

STATE

BARCODE

Disable ACK

NAK

Enable ACK

NAK for

Transmission

Enable ACK

NAK for host-

command

acknowledge

Enable ACK

NAK for trans-

mission and

host-command

END

Product Reference Guide

3-23

Interface Related Features

RS-232 Interface Features — cont.

ACK Character

START

MODE

BARCODE

Sets the ACK character from the set of ASCII charac-

ters or any decimal value from 000 to 255. Pad

entries of less than three digits with zeros, as in

“005”. To configure this feature, scan the “START” bar

code above to place the unit in Programming Mode,

then the “Set ACK Character,” followed by the digits

from the Alphanumeric table in Appendix C, Alpha-

Numeric Pad representing your desired character.

Exit programming mode by scanning the “END” bar-

code below.

DEFAULT SETTING FOR THIS FEATURE: 006

Set ACK

Character

END

3-24

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

NAK Character

START

MODE

BARCODE

Sets the NAK character from the set of ASCII charac-

ters or any decimal value from 000 to 255. Pad

entries of less than three digits with zeros, as in

“005”. To configure this feature, scan the “START” bar

code above to place the unit in Programming Mode,

then the “Set NAK Character,” followed by the digits

from the Alphanumeric table in Appendix C, Alpha-

Numeric Pad representing your desired character.

Exit programming mode by scanning the “END” bar-

code below.

DEFAULT SETTING FOR THIS FEATURE: 021

Set NAK

Character

END

Product Reference Guide

3-25

Interface Related Features

RS-232 Interface Features — cont.

Retry on ACK NAK Timeout

Enables/disables retry after the configurable ACK NAK Timeout Value

(set in the following feature) has expired.

START

STATE

BARCODE

Disable Retry

on ACK NAK

Timeout

Enable Retry

on ACK NAK

Timeout

END

3-26

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

ACK NAK Timeout Value

START

MODE

BARCODE

This item specifies the time the scanner will wait for

an ACK character from the host following a label

transmission.

0 = Infinite timeout

1 - 75 = Timeout in 200-millisecond increments

To configure this feature, scan the “START” bar code

above to place the unit in Programming Mode, then

the “Set ACK NAK Timeout Value,” followed by the

digits from the Alphanumeric table in Appendix C,

Alpha-Numeric Pad representing your desired

value. Exit programming mode by scanning the

“END” barcode below

DEFAULT SETTING FOR THIS FEATURE: 01

Set ACK

NAK Timeout

Value

END

Product Reference Guide

3-27

Interface Related Features

RS-232 Interface Features — cont.

ACK NAK Retry Count

START

MODE

BARCODE

This feature sets the number of times for the scanner

to retry a label transmission under a retry condition.

0 = No retry

1 - 254 = Retry for the specified number of times

255 = Retry forever

To configure this feature, scan the “START” bar code

above to place the unit in Programming Mode, then

the “Set ACK NAK Retry Count,” followed by the dig-

its from the Alphanumeric table in Appendix C,

Alpha-Numeric Pad representing your desired retry

count. Exit programming mode by scanning the

“END” barcode below

DEFAULT SETTING FOR THIS FEATURE: 03

Set ACK

Nak Retry

Count

END

3-28

PowerScan 7000 Linear Imager

Interface Features

RS-232 Interface Features — cont.

ACK NAK Error Handling

This item specifies the method the scanner will use to handle errors

detected while waiting to receive the ACK character from the host.

Errors include unrecognized host commands and communication errors

such as parity or framing errors. Choices are:

00 = Ignore errors detected (recommended setting)

01 = Process error as valid ACK character (risk of lost label data)

02 = Process error as valid NAK character (risk of duplicate label data)

START

STATE

BARCODE

Ignore Errors

Detected

Process error

as valid ACK

character

Process error

as valid NAK

character

END

Product Reference Guide

3-29

Interface Related Features

RS-232 Interface Features — cont.

Transmission Failure Indication

Enables/disables bad-label indication upon transmission failure.

START

STATE

BARCODE

Disable

Transmission

Error Indication

Enable

Transmission

Error

Indication

END

3-30

PowerScan 7000 Linear Imager

Interface Features

IBM-USB Interface Features

IBM-USB Device usage

The IBM-USB protocol allows for the scanner to be identified as one of

two different types of bar code scanners. Depending on what other scan-

ners you may already have connected to a IBM-USB POS, you may need

to change this setting to enable all devices to communicate. Options are:

•

Table Top Scanner

Handheld Scanner

START

STATE

BARCODE

Configure as

Table Top

Scanner

Configure as

Handheld

Scanner

END

Product Reference Guide

3-31

Interface Related Features

IBM

IBM Transmit Labels in Code 39 Format

This feature enables/disables scanner's ability to set a symbol-

ogy identifier for a specified label to Code 39 before transmit-

ting that label data to an IBM host. This applies to: Code 128,

Codabar and Code 93 for IBM USB; Code 128, Codabar and

Code 93 for IBM Port 5B; and Codabar and Code 93 for IBM

Port 9B.

START

STATE

BARCODE

Disable

Convert to

Code 39

Enable Convert

to Code 39

END

3-32

PowerScan 7000 Linear Imager

Interface Features

Wand Emulation

Supported Symbologies

The Wand Emulation interface will transmit bar code data as a wand

device would. This interface will transmit the following bar code sym-

bologies:

•

UPC/EAN

UPC/EAN with addons

Code 39

Full ASCII Code 39

Interleaved 2 of 5

Codabar

Code 128

Pharmacode 39 is transmitted as Code 39, all other bar code symbology

types read by the scanner will be transmitted as Code 128.

Wand Emulation Bar Code Format

The following format settings are required for the wand emulation inter-

face. These settings have been pre-configured at the factory for Wand

Emulation scanners.

•

UPC-A bar codes must include all 12 digits.

UPC-E bar codes must contain 8 digits, including a system digit, 6

data digits, and the check digit.

•

EAN-13 bar codes must have all 13 digits.

EAN-8 bar codes must include all 8 digits.

Code 39, Code 39 Full ASCII, and Pharmacode 39 bar codes must

NOT contain start / stop characters.

•

Codabar bar codes must include the start / stop characters, pre-

sented in the ABCD format.

Interleaved 2 of 5 bar codes must have an even number of digits.

Product Reference Guide

3-33

Interface Related Features

Wand Emulation — cont.

Bar/Space Polarity

Low/High — Black will be transmitted as a low voltage level (0 to

+0.7V) and space as high level (+2.4 to +5.25V).

High/Low — Black will be transmitted as a high voltage level (+2.4 to

+5.25V) and space as low level (0 to +0.7V).

Wand Idle State

This feature specifies the level of the wand output signal when idle. TTL

logic levels:

High voltage level (+2.4 to +5.25V)

Low voltage level (0 to +0.7V).

START

STATE

BARCODE

Bar/Space =

Low/High

Bar/Space =

High/Low

3-34

PowerScan 7000 Linear Imager

Interface Features

Wand Emulation — cont.

START

STATE

BARCODE

Wand Idle

State = Low

Wand Idle State

= High

END

Product Reference Guide

3-35

Interface Related Features

Wand Emulation — cont.

Signal Speed

The speed of the transmission can be set. This selects the width of the

minimum narrow bar.

330 microseconds

660 microseconds

START

STATE

BARCODE

Signal Speed =

330mS

SignalSpeed=

660mS

3-36

PowerScan 7000 Linear Imager

Interface Features

Wand Emulation — cont.

Transmit Leading Noise

The transmission of noise pulses before the bar code may be enabled or

disabled.

START

STATE

BARCODE

Disable

Trailing Noise

EnableTrailing

Noise

END

Product Reference Guide

3-37

Interface Related Features

Symbology Conversion

Wand Emulation can convert all bar codes to a single symbology.

Choices are:

No Conversion

Convert to Code 39

Convert to Code 128

START

STATE

BARCODE

Disable

Leading Noise

Enable

Leading Noise

No Symbology

Conversion

3-38

PowerScan 7000 Linear Imager

Interface Features

Symbology Conversion — cont.

START

STATE

BARCODE

Convert to C39

Convert to

C128

END

Product Reference Guide

3-39

Interface Related Features

Keyboard Wedge/USB Keyboard

As a keyboard interface, the scanner supports most popular PCs and

IBM terminals. The installation of the wedge is a fairly simple process

that doesn’t require any changes of software or hardware.

All of the options in this section apply to the Key-

board Wedge, however, only Keyboard Layout, Caps

Lock State and Control Characters apply to USB Key-

board.

NOTE

Keyboard Layout

The Keyboard Layout option supports many countries. For details about

Keyboard Layout, please refer to your operating system manual.

START

STATE

BARCODE

USA

Belgium

Britain

Denmark

3-40

PowerScan 7000 Linear Imager

Interface Features

Keyboard Wedge/USB Keyboard — cont.

START

STATE

France

BARCODE

Germany

Italy

Norway

Portugal

Spain

Sweden

Product Reference Guide

3-41

Interface Related Features

Keyboard Wedge/USB Keyboard — cont.

START

STATE

BARCODE

Switzerland

Japan 106 Key

Hungary

Czech

Slovakia

Romania

3-42

PowerScan 7000 Linear Imager

Interface Features

Keyboard Wedge/USB Keyboard — cont.

START

STATE

Croatia

BARCODE

Poland

END

Product Reference Guide

3-43

Interface Related Features

Keyboard Wedge/USB Keyboard — cont.

Caps Lock State

Specifies which format the scanner sends character data.

START

STATE

BARCODE

Disable Caps

Lock

Caps Lock “ON”

Shift Lock “ON”

END

3-44

PowerScan 7000 Linear Imager

Interface Features

Keyboard Wedge/USB Keyboard — cont.

Keyboard Simulation

This feature does not apply to the USB Keyboard

interface.

NOTE

All PCs check the keyboard status during the power-on Selftest. It is rec-

ommended that you enable this function if you are working without a

keyboard installation. It simulates keyboard timing and passes the key-

board status to the PC during power-on.

Control Characters

Specifies how the scanner transmits ASCII control characters to the host.

Choices are:

•

Disable Control Characters

Enable transmission of control characters to host

Send characters between 00H and 1FH according to a special

function-key mapping table. (This is used to send keys that are not

in the normal ASCII set; a unique set is provided for each available

scancode set. Reference Appendix E, Keyboard Function Key Map-

pings.)

Product Reference Guide

3-45

Interface Related Features

Keyboard Wedge/USB Keyboard — cont.

START

STATE

BARCODE

Disable

Keyboard

Simulation

Enable

Keyboard

Simulation

Disable

Control

Characters

Enable

Transmission of

Control

Characters

Enable

Function Key

Mapping

END

3-46

PowerScan 7000 Linear Imager

Interface Features

Keyboard Wedge/USB Keyboard — cont.

Wedge Quiet Interval

This feature does not apply to the USB Keyboard

interface.

NOTE

Quiet Interval is the amount of time to look for keyboard activity before

the scanner breaks the keyboard connection in order to transmit data to

the host..

START

MODE

BARCODE

Selectable from 00 (no interval) to 255 in 10 msec

increments. Use hexidecimal (range: 00 to FF hexidec-

imal) to set the interval. To configure this feature, scan

the “START” bar code above to place the unit in Pro-

gramming Mode, then the Set Wedge Quiet Interval

bar code followed by the digits from the Alphanumeric

table in Appendix C, Alpha-Numeric Pad represent-

ing your desired length. Exit programming mode by

scanning the “END” barcode below

DEFAULT SETTING FOR THIS FEATURE:

0A (100 msec)

Set Wedge

Quiet Interval

END

Product Reference Guide

3-47

Interface Related Features

Keyboard Wedge/USB Keyboard — cont.

Intercharacter Delay

This feature does not apply to the USB Keyboard

interface.

NOTE

START

MODE

BARCODE

One-half of the delay specified below is inserted

between scancodes within each character. If the trans-

mission speed is too high, the system may not be able

to receive all characters. You may need to adjust the

delay to make the system work properly. Selectable

from 00 to 255 in 10msec increments. Use hexidecimal

(range: 00 to FF hexidecimal) to set the delay.

To configure this feature, scan the “START” bar code

above to place the unit in Programming Mode, then the

“Set Intercharacter Delay,” followed by the digits from

the Alphanumeric table in Appendix C, Alpha-

Numeric Pad representing your desired length. Exit

programming mode by scanning the “END” barcode

below

DEFAULT SETTING FOR THIS FEATURE:

00 (No Delay)

Set

Intercharacter

Delay

END

3-48

PowerScan 7000 Linear Imager

Chapter 4

Data Editing

Data Editing Overview

It is not recommended to use these features with IBM

or Wand Emulation interfaces.

CAUTION

When a bar code is scanned, additional information can be sent to the

host computer along with the bar code data. This combination of bar

code data and supplementary user-defined data is called a “message

string.” The features in this chapter can be used to build specific

user-defined data into a message string.

There are several types of selectable data characters that can be sent

before and after scanned data. You can specify if they should be sent

with all symbologies, or only with specific symbologies. Figure 4-1 shows

the available elements you can add to a message string:

Figure 4-1. Breakdown of a Message String

Label ID Transmission:

Enable this option to

transmit the Label ID you

configure for the scanned

symbology.

OR...

Prefix Label ID

AIM ID

Bar Code Data

Label ID

Suffix

AIM ID: This function is used to identify and display the

common label identifier for its symbology. When enabled,

this ID code will be transmitted before the scanned bar

code data.

00 - 20 Characters (ASCII)

Product Reference Guide

4-1

Data Editing

Please Keep In Mind...

•

Modifying a message string is not a mandatory requirement. Data

editing is sophisticated feature allowing highly customizable out-

put for advanced users. Factory default settings for data editing is

typically set to NONE.

•

A prefix or suffix may be applied (reference the Symbologies chap-

ter for these settings) across all symbologies (set via the Global fea-

tures in this chapter).

•

You can add any character from the ASCII Chart (from 00-FF) on

the inside back cover of this manual as a prefix, suffix or Label ID.

Enter prefixes and suffixes in the order in which you want them to

appear on the output.

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before

the bar code data) and/or as a suffix (in a position following the bar code

data) as indicated in Figure 4-2.

Figure 4-2. Prefix and Suffix Positions

OR...

Prefix

Label ID

AIM ID

Bar Code Data

Label ID

Suffix

00 - 20 Characters (ASCII)

AND

4-2

PowerScan 7000 Linear Imager

Global Prefix/Suffix

Global Prefix/Suffix — continued

Example: Setting a Prefix

In this example, we’ll set a prefix for all symbologies.

1. Determine which ASCII character(s) are to be added to scanned

bar code data. In this example, we’ll add a dollar sign (‘$’) as a pre-

fix.

2. Scan the START bar code.

3. Scan the SET PREFIX bar code.

4. Reference the ASCII Chart on the inside back cover of this manual,

to find the hex value assigned to the desired character. The corre-

sponding hex number for the ‘$’ character is 24. To enter this

selection code, scan the ‘2’ and ‘4’ bar codes from Appendix C,

Alpha-Numeric Pad.

5. Scan the END bar code to exit Programming Mode.

If less than the expected string of 20 characters are

selected, scan the END bar code twice to accept the

selections and exit Programming Mode.

NOTE

6. The resulting message string would appear as follows:

Scanned bar code data:

12345

Resulting message string output: $12345

Product Reference Guide

4-3

Data Editing

Global Prefix/Suffix — continued

START

MODE

BARCODE

Sets up to 20 characters each from the set of ASCII

characters or any hex value from 0 to FF. To config-

ure this feature, scan the “START” bar code above to

place the unit in Programming Mode, then the “Set

Prefix” or “Set Suffix,” followed by the digits from the

Alphanumeric table in Appendix C, Alpha-Numeric

Pad representing your desired character(s). Refer-

ence the section, Example: Setting a Prefix, for

more information. Exit programming mode by scan-

ning the “END” barcode below (scan “END” twice if

less than 20 characters have been selected).

DEFAULT SETTING FOR THIS FEATURE: 00 (None)

Set Prefix

Set Suffix

END

4-4

PowerScan 7000 Linear Imager

AIM ID

AIM label identifiers (as opposed to custom characters you select your-

self as with label identifiers) can be included with scanned bar code data.

AIM label identifiers consist of three characters as follows:

•

A close brace character (ASCII ‘]’), followed by...

A code character (see the table below), followed by

A modifier character (the modifier character is symbol dependent)

SYMBOLOGY

CHAR

SYMBOLOGY

MSI/Plessey

CHAR

UPC/EAN

Code 39

PDF 417 & Micro PDF 417

RSS (RSS-14, RSS

Expanded

Codabar

Interleaved.2 of 5

Code 93

Standard 2 of 5

ISBN

X^a

Code 128/EAN 128

a. ISBN (X with a 0 modifier character)

Figure 4-3. AIM ID

Prefix Label ID

AIM ID

Bar Code Data

Label ID

Suffix

Product Reference Guide

4-5

Data Editing

AIM ID — continued

START

STATE

BARCODE

Disable AIM ID

Enable AIM ID

END

4-6

PowerScan 7000 Linear Imager

Label ID

A Label ID is a customizable code of up to two ASCII characters (00-

FF), used to identify a bar code (symbology) type. It can be appended

previous to or following the transmitted bar code data depending upon

how this option is enabled. This feature provides options for configuring

custom Label IDs individually per symbology. If you wish to program

the scanner to always include an industry standard label identifier for

ALL symbology types, see the previous feature, AIM ID.

To configure a Label ID:

1. Scan the START bar code.

2. Select Label ID position as either BEFORE or AFTER by scan-

ning the appropriate bar code.

3. Scan a bar code to select the symbology for which you wish to con-

figure a custom Label ID.

4. Determine the desired character(s) (you may choose either one or

two) which will represent the Label ID for the selected symbology.

Next, turn to the ASCII Chart on the inside back cover of this man-

ual and find the equivalent hex digits associated with your choice

of Label ID. For example, if you wish to select an equal sign (=) as

a Label ID, the chart indicates its associated hex characters as 3D.

5. Turn to Appendix C, Alpha-Numeric Pad and scan the bar codes rep-

resenting the hex characters determined in the previous step. For

the example given, the characters ‘0’, ‘0’, ‘3’ and ‘D’ would be

scanned. The two zeros scanned (‘0’, ‘0’) represent a selection of

“no character,” since this option allows for two Label ID charac-

ters. (Pad with zeros to enter four hex characters.)

6. Scan the END bar code to exit programming mode.

Figure 4-4. Label ID Position Options

Prefix

Label ID

Aim ID

Bar Code Data

Label ID

Suffix

Product Reference Guide

4-7

Data Editing

Label ID — continued

START

OPTION

BARCODE

Label ID

Transmission:

Disable

Label ID

Position:

Before Bar

Code Data

Label ID

Position: After

Bar Code Data

Set UPC-A

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: A (41 hex)

Set UPC-A

w/P2 Addon

Label ID

Character(s)

Set UPC-A

w/P5 Addon

Label ID

Character(s)

4-8

PowerScan 7000 Linear Imager

Label ID

Label ID — continued

START

OPTION

BARCODE

Set UPC-A

w/C128 Addon

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: A (41 hex)

DEFAULT SETTING FOR THIS FEATURE: E (45 hex)

Set UPC-E

Label ID

Character(s)

Set UPC-E

w/P2 Addon

Label ID

Character(s)

Set UPC-E

w/P5 Addon

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: E (45 hex)

Set UPC-E

w/C128 Addon

Label ID

Character(s)

Set EAN-8

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: FF

(4646 hex)

Set EAN-8

w/P2 Addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

FF (4646 hex)

Character(s)

Product Reference Guide

4-9

Data Editing

Label ID — continued

START

OPTION

BARCODE

Set EAN-8

w/P5 Addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

FF (4646 hex)

Character(s)

Set EAN-8

w/C128 Addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

FF (4646 hex)

Character(s)

Set EAN-13

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: F (46 hex)

Set EAN-13

w/P2 Addon

Label ID

Character(s)

Set EAN-13

w/P5 Addon

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: F (46 hex)

Set EAN-13

w/C128 Addon

Label ID

Character(s)

Set ISBN

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: I (49 hex)

4-10

PowerScan 7000 Linear Imager

Label ID

Label ID — continued

START

OPTION

BARCODE

Set GTIN

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: G (47 hex)

Set GTIN

w/P2 addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

G2 (4732 hex)

Character(s)

Set GTIN

w/P5 addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

G5 (4735 hex)

Character(s)

Set GTIN

w/C128 addon

Label ID

DEFAULT SETTING FOR THIS FEATURE:

G8 (4738 hex)

Character(s)

Set RSS-14

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: R4

(5234 hex)

Product Reference Guide

4-11

Data Editing

Label ID — continued

START

OPTION

BARCODE

Set RSS

Expanded

Label ID

DEFAULT SETTING FOR THIS FEATURE: RX

(5258 hex)

Character(s)

Set Code 39

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE:

* (2A hex)

Set

Pharmacode 39

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: A (41 hex)

DEFAULT SETTING FOR THIS FEATURE: # (23 hex)

DEFAULT SETTING FOR THIS FEATURE: i (69 hex)

Set Code 128

Label ID

Character(s)

Set I 2 of 5

Label ID

Character(s)

4-12

PowerScan 7000 Linear Imager

Label ID

Label ID — continued

START

OPTION

BARCODE

Set

Codabar

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: % (25 hex)

DEFAULT SETTING FOR THIS FEATURE: & (26 hex)

Set

Code 93 Label

Character(s)

Set

MSI/Plessey

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE:

@ (40 hex)

Set

Std 2 of 5

Label ID

Character(s)

DEFAULT SETTING FOR THIS FEATURE: i (69 hex)

DEFAULT SETTING FOR THIS FEATURE: P (50 hex)

Set

PDF 417

Label ID

Character(s)

END

Product Reference Guide

4-13

Data Editing

Case Conversion

This feature can convert scanned bar code data to either all lower case or

all upper case characters.

Case conversion affects ONLY scanned bar code data,

and does not affect Label ID, Prefix, Suffix, or other

appended data.

NOTE

START

MODE

BARCODE

Disable

Convert to

Upper Case

Convert to

Lower Case

END

4-14

PowerScan 7000 Linear Imager

Label ID

Character Conversion

Character conversion is an eight byte configuration item. The eight

bytes are 4 character pairs represented in hexadecimal ASCII values. The

first character in the pair is the character that will be converted. The sec-

ond character in the pair is the character to convert to. If the character

to convert in a pair is FF, then no conversion is done.

For example, if you have the character conversion configuration item set

to the following: 41423132FFFFFFFF

The first pair is 4142 or AB (41 hex is an ASCII capital A, 42 hex is an

ASCII capital B) and the second pair is 3132 or 12 (31 hex is an ASCII

1, 32 is an ASCII 2). The other two pairs are FFFF and FFFF.

With the label, AB12BA21, it would look as follows after the character

conversion: BB22BB22.

The A characters were converted to B characters and the 1 characters

were converted to 2 characters. Nothing is done with the last two char-

acter pairs, since they are all FF.

To set Character Conversion:

1. Scan the START bar code.

2. Scan the Character Conversion bar code.

3. Determine the desired string. Sixteen positions must be deter-

mined as in the above example. Next, turn to the ASCII Chart on

the inside back cover of this manual and find the equivalent hex

digits needed to fulfill the string.

4. Turn to Appendix C, Alpha-Numeric Pad and scan the bar codes rep-

resenting the hex characters determined in the previous step.

5. Scan the END bar code to exit Programming Mode.

If less than the expected string of 16 characters are

selected, scan the END bar code twice to accept the

selections and exit Programming Mode.

NOTE

Scan the END bar code to exit programming mode.

Product Reference Guide

4-15

Data Editing

Character Conversion — continued

START

MODE

BARCODE

Character

Conversion

DEFAULT SETTING FOR THIS FEATURE:

FFFFFFFFFFFFFFFF hex (no conversion)

END

4-16

PowerScan 7000 Linear Imager

Chapter 5

Symbologies

The scanner supports the following symbologies (bar code types).

Options for each symbology are included in this chapter.

·UPC-A

·Pharmacode 39

·Code 128

·UPC-E

·EAN-13

·EAN-8

·Interleaved 2 of 5

·Codabar

·RSS-14

·RSS Expanded

·Code 39

·PDF 417

·Code 93

·MSI/Plessey

·Standard 2 of 5

Factory Defaults — are indicated in bold text and are highlighted

with yellow throughout this section.

Product Reference Guide

5-1

Symbologies

UPC-A

The following options apply to the UPC-A symbology.

Disable/Enable UPC-A

When disabled, the scanner will not read UPC-A bar codes.

Check Digit Transmission

Enable this option to transmit the check digit along with UPC-A bar

code data.

Expand UPC-A to EAN-13

Expands UPC-A data to the EAN-13 data format. Selecting this feature

also changes the symbology ID to match those required for EAN-13.

System Number Transmission

This feature enables/disables transmission of UPC-A System Number.

5-2

PowerScan 7000 Linear Imager

UPC-A

UPC-A — continued

START

STATE

BARCODE

Disable UPC-A

Enable UPC-A

Don’t Send

Check Digit

Send

Check Digit

Don’t Expand

to EAN-13

Expand to

EAN-13

Product Reference Guide

5-3

Symbologies

UPC-A — continued

START

STATE

BARCODE

Disable Sys-

tem Number

Transmission

EnableSystem

Number Trans-

mission

END

5-4

PowerScan 7000 Linear Imager

UPC-A

UPC-A — continued

UPC-A Minimum Reads

This feature specifies the minimum number of consecutive times a UPC-

A label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-5

Symbologies

UPC-A — continued

In-store Minimum Reads

This feature specifies the minimum number of consecutive times an in-

store printed label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-6

PowerScan 7000 Linear Imager

UPC-A

UPC-A — continued

START

STATE

BARCODE

This item is used to set the timer value when optional

add-ons are enabled. The selectable range is from

10 to 300 mSec in 10 mSec increments and is

entered in hex (01-0x1E by 01). To configure this fea-

ture, scan the “START” bar code above to place the

unit in Programming Mode, then the “Add-On Timer,”

followed by the hex digits from the Alphanumeric

table in Appendix C, Alpha-Numeric Pad repre-

senting the disired timer setting. Exit programming

mode by scanning the “END” bar code below.

Add-On Timer

DEFAULT SETTING FOR THIS FEATURE:

07 (70 milliseconds)

END

Product Reference Guide

5-7

Symbologies

UPC-E

The following options apply to the UPC-E symbology.

Disable/Enable UPC-E

When disabled, the scanner will not read UPC-E bar codes.

Check Digit Transmission

Enable this option to transmit the check digit along with UPC-E bar

code data.

System Number

The System Number (SN) which is usually a zero (0) in the leading posi-

tion can be optionally included (or not) with scanned bar code data.

Expand to UPC-E to UPC-A

Enables/disables expansion of UPC-E labels to UPC-A.

Expand UPC-E to EAN13

Adds a leading zero to a UPC-E bar code which ‘expands’ the data to the

EAN-13 data format. Selecting this feature also changes the symbology

ID to match those required for EAN-13.

5-8

PowerScan 7000 Linear Imager

UPC-E

UPC-E — continued

START

STATE

BARCODE

Disable UPC-E

Enable UPC-E

Don’t Send

Check Digit

Send

Check Digit

Exclude Sys-

tem Number

Include System

Number

Product Reference Guide

5-9

Symbologies

UPC-E — continued

START

STATE

BARCODE

Don’t Expand

UPC-E to

UPC-A

Expand UPC-E

to UPC-A

Don’t Expand

UPC-E to

EAN-13

Expand UPC-E

to EAN-13

END

5-10

PowerScan 7000 Linear Imager

UPC-E

UPC-E — continued

Minimum Reads

This feature specifies the minimum number of consecutive times a UPC-

E label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-11

Symbologies

GTIN

The following options apply to the GTIN label data format.

Disable/Enable GTIN

When this feature is enabled, the scanner will translate UPC/EAN labels

to the 14 digit GTIN format.

START

STATE

BARCODE

Disable GTIN

Enable GTIN

END

5-12

PowerScan 7000 Linear Imager

EAN-13

The following options apply to the EAN-13 symbology.

Disable/Enable EAN-13

When disabled, the scanner will not read EAN-13 bar codes.

Check Digit Transmission

Enable this option to transmit the check digit along with EAN-13 bar

code data.

EAN-13 Flag 1 Character

Enables/disables transmission of an EAN/JAN13 Flag1 character.

ISBN

When enabled, this feature truncates the leading three digits from labels

that contain ISBN (International Standard Book Number). These codes

are used for books and magazines. Labels with ISBN codes start with

"978".

Example:

Bar code data:

Output:

“9789572222720”

“9572222724”

Product Reference Guide

5-13

Symbologies

EAN-13 — continued

START

STATE

BARCODE

Disable EAN-13

Enable EAN-13

Don’t Send

Check Digit

Send

Check Digit

Don’t Transmit

EAN-13 Flag 1

Char

Transmit

EAN-13 Flag 1

Char

5-14

PowerScan 7000 Linear Imager

EAN-13

EAN-13 — continued

START

STATE

BARCODE

Disable ISBN

Enable ISBN

END

Product Reference Guide

5-15

Symbologies

EAN-13 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

EAN-13 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-16

PowerScan 7000 Linear Imager

EAN-8

The following options apply to the EAN-8 symbology.

Disable/Enable EAN-8

When disabled, the scanner will not read EAN-8 bar codes.

Check Digit Transmission

Enable this option to transmit the check Digit along with EAN-8 bar

code data.

START

STATE

BARCODE

Disable EAN-8

Enable EAN-8

Don’t Send

Check Digit

Send

Check Digit

END

Product Reference Guide

5-17

Symbologies

EAN-8 — continued

Expand EAN-8 to EAN-13 — Expands EAN-8 data to the EAN-13

data format. Selecting this feature also changes the symbology ID to

match those required for EAN-13.

START

STATE

BARCODE

Don’t Expand

to EAN-13

Expand to

EAN-13

END

5-18

PowerScan 7000 Linear Imager

EAN-8

EAN-8 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

EAN-8 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-19

Symbologies

Add-ons

Add-ons (or supplemental characters) are commonly added to the end of

UPC/EAN bar codes. The scanner will read the add-ons if they are

enabled and in the field of view. Three add-on types are supported: 2-

digit, 5-digit and Code 128 add-ons. Supported options are:

None — This option directs the scanner to ignore add-on portion of a

UPC/EAN bar code but still read the main portion of the bar code.

2 Digits — The scanner will optionally read 2-digit add-ons with the

UPC/EAN label.

5 Digits — The scanner will optionally read 5-digit add-ons with the

UPC/EAN label.

Code 128 Add-on — The scanner will optionally read Code 128 add-

ons with the UPC/EAN label.

Contact Customer Support for advanced programming of

optional and conditional add-ons.

NOTE

5-20

PowerScan 7000 Linear Imager

Add-ons

Add-ons — continued

START

STATE

BARCODE

Disable

Optional 2-

Digit Add-ons

EnableOptional

2-Digit Add-ons

Disable

Optional 5-

Digit Add-ons

EnableOptional

5-Digit Add-ons

Disable

Optional Code

128 Add-ons

EnableOptional

Code 128

Add-ons

END

Product Reference Guide

5-21

Symbologies

RSS-14

The following options apply to the RSS-14 symbology.

Disable/Enable RSS-14

When this feature is disabled, the scanner will not read RSS-14 bar

codes.

UCC/EAN 128 Emulation

When enabled, RSS-14 bar codes will be translated to the UCC/EAN

128 label data format.

5-22

PowerScan 7000 Linear Imager

RSS-14

RSS-14 — continued

START

STATE

BARCODE

Disable

RSS-14

Enable RSS-14

Disable

UCC/EAN 128

Emulation

Enable

UCC/EAN 128

Emulation

END

Product Reference Guide

5-23

Symbologies

RSS-14 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

RSS-14 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-24

PowerScan 7000 Linear Imager

RSS Expanded

The following options apply to the RSS Expanded symbology.

Disable/Enable RSS Expanded

When this feature is disabled, the scanner will not read RSS Expanded

bar codes.

UCC/EAN 128 Emulation

When enabled, RSS Expanded bar codes will be translated to the UCC/

EAN 128 label data format.

START

STATE

BARCODE

Disable

RSS Expanded

Enable RSS

Expanded

Disable

UCC/EAN 128

Emulation

Enable

UCC/EAN 128

Emulation

END

Product Reference Guide

5-25

Symbologies

RSS Expanded — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the RSS

Expanded Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the RSS Expanded Length 1, Length

2 Programming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the RSS

Expanded Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the RSS

Expanded Length 1, Length 2 Programming Instructions below.

5-26

PowerScan 7000 Linear Imager

RSS Expanded

RSS Expanded — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

Product Reference Guide

5-27

Symbologies

RSS Expanded — continued

RSS Expanded Length 1, Length 2 Pro-

gramming Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For RSS Expanded bar codes, only the data

characters are included in the length calcula-

tions.

NOTE

4. Scan the END bar code.

START

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 01

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 74 decimal

END

5-28

PowerScan 7000 Linear Imager

RSS Expanded

RSS Expanded — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an RSS

Expanded label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-29

Symbologies

Code 39

The following options apply to the Code 39 symbology.

Disable/Enable Code 39

When this feature is disabled, the scanner will not read Code 39 bar

codes.

Check Character Calculation

When enabled, the scanner will calculate the check character of the

labels. Turn this option on only when a checksum is present in the Code

39 labels.

Check Character Transmit

Enable this option to transmit the check character with scanned bar code

data.

Start/Stop Characters

Enables/disables transmission of Code39 start and stop characters.

Code 39 Full ASCII

Enables/disables the translation of Code 39 characters to Code 39 full-

ASCII characters

5-30

PowerScan 7000 Linear Imager

Code 39

Code 39 — continued

START

STATE

BARCODE

Disable

Code 39

Enable

Code 39

Disable

Check Char

Calculation

Enable

Check Char

Calculation

Disable

Check Char

Transmission

Enable

Check Char

Transmission

Product Reference Guide

5-31

Symbologies

Code 39 — continued

START

STATE

BARCODE

Don’t Transmit

Start/Stop

Characters

Transmit

Start/Stop

Characters

Disable

Code 39 Full

ASCII

Enable

Code 39 Full

ASCII

END

5-32

PowerScan 7000 Linear Imager

Code 39

Code 39 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Code 39

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Code 39 Length 1, Length 2 Pro-

gramming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Code 39

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Code 39

Length 1, Length 2 Programming Instructions below.

Product Reference Guide

5-33

Symbologies

Code 39 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

5-34

PowerScan 7000 Linear Imager

Code 39

Code 39 Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Code 39 bar codes, all check, data and full ASCII

shift characters are included in the length calculations.

Start/Stop characters are not included.

NOTE

4. Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 03

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 50 decimal

END

Product Reference Guide

5-35

Symbologies

Code 39 — continued

Quiet Zones

This feature enables/disables the requirement that quiet zones must be

present for Code 39 bar codes.

START

STATE

BARCODE

Don’t require

Quiet Zones

Require Quiet

Zones

END

5-36

PowerScan 7000 Linear Imager

Code 39

Code 39 — continued

Code 39 Stitching

Enables/disables stitching for Code 39 labels. When parts of a Code 39

bar code are presented to the scanner with this feature enabled, the bar

code parts will be assembled by the scanner’s software, and the data will

be decoded if all bar code proofing requirements are met.

START

STATE

BARCODE

Disable

Code 39

Stitching

Enable

Code 39

Stitching

END

Product Reference Guide

5-37

Symbologies

Code 39 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Code 39 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-38

PowerScan 7000 Linear Imager

Pharmacode 39

The following options apply to the Pharmacode 39 symbology.

Disable/Enable Pharmacode 39

When this feature is disabled, the scanner will not read Pharmacode 39

bar codes.

START

STATE

BARCODE

Disable

Pharmacode

Enable

Pharmacode 39

END

Product Reference Guide

5-39

Symbologies

Pharmacode 39 — continued

Start/Stop Characters

Enables or disables transmission of Pharmacode 39 start/stop characters.

Check Character Transmit

Enable this option to transmit the check character with scanned bar code

data.

START

STATE

BARCODE

Don’t Trans-

mit Start/Stop

Characters

Transmit

Start/Stop

Characters

Disable

Check Char

Transmission

Enable

Check Char

Transmission

END

5-40

PowerScan 7000 Linear Imager

Code 128

The following options apply to the Code 128 symbology.

Disable/Enable Code 128

When this feature is disabled, the scanner will not read Code 128 bar

codes.

START

STATE

BARCODE

Disable

Code 128

Enable

Code 128

Product Reference Guide

5-41

Symbologies

Code 128 — continued

Transmit Function Characters

Enables/disables transmission of Code128 function characters 1, 2, 3,

and 4.

Function codes are transmitted as follows:

•

FNC1 = 80 hex

FNC2 = 81 hex

FNC3 = 82 hex

FNC4 = 83 hex

START

STATE

BARCODE

Don’t Trans-

mit Function

Characters

Transmit

Function

Characters

END

5-42

PowerScan 7000 Linear Imager

Code 128

Code 128 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Code 128

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Code 128 Length 1, Length 2 Pro-

gramming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Code 128

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Code 128

Length 1, Length 2 Programming Instructions below.

Product Reference Guide

5-43

Symbologies

Code 128 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

5-44

PowerScan 7000 Linear Imager

Code 128

Code 128 — continued

Code 128 Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Code 128 bar codes, only the data charac-

ters are included in the length calculations.

NOTE

4. Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 01

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 80 decimal

END

Product Reference Guide

5-45

Symbologies

Code 128 — continued

Code 128 Stitching

Enables/disables stitching for Code 128 labels. When parts of a Code

128 bar code are presented to the scanner with this feature enabled, the

bar code parts will be assembled by the scanner’s software, and the data

will be decoded if all bar code proofing requirements are met.

START

STATE

BARCODE

Disable

Code 128

Stitching

Enable

Code 128

Stitching

END

5-46

PowerScan 7000 Linear Imager

Code 128

Code 128 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Code 128 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-47

Symbologies

Interleaved 2 of 5

The following options apply to the Interleaved 2 of 5 (I 2 of 5) symbol-

ogy.

Disable/Enable Interleaved 2 of 5

When this feature is disabled, the scanner will not read Interleaved 2 of 5

bar codes.

Check Digit Calculation

When enabled, the scanner will calculate the check digit of the labels.

Check Digit Transmit

Enable this option to transmit the check digit with scanned bar code

data.

5-48

PowerScan 7000 Linear Imager

Interleaved 2 of 5

Interleaved 2 of 5 — continued

START

STATE

BARCODE

Disable

Interleaved

2 of 5

Enable

Interleaved

2 of 5

Disable

Check Digit

Calculation

Enable

Check Digit

Calculation

Disable

Check Digit

Transmission

Enable

Check Digit

Transmission

END

Product Reference Guide

5-49

Symbologies

Interleaved 2 of 5 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Interleaved 2

of 5 Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Interleaved 2 of 5 Length 1,

Length 2 Programming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Interleaved 2

of 5 Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Interleaved 2

of 5 Length 1, Length 2 Programming Instructions below.

5-50

PowerScan 7000 Linear Imager

Interleaved 2 of 5

Interleaved 2 of 5 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

Product Reference Guide

5-51

Symbologies

Interleaved 2 of 5 — continued

Interleaved 2 of 5 Length 1, Length 2 Pro-

gramming Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Interleaved 2 of 5 bar codes, lengths must

be an even number. Additionally, all check and

data characters are included in the length calcu-

lations.

NOTE

4. Scan the END bar code.

START

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 06

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 50 decimal

END

Interleaved 2 of 5 — continued

5-52

PowerScan 7000 Linear Imager

Interleaved 2 of 5

Interleaved 2 of 5 Stitching

Enables/disables stitching for Interleaved 2 of 5 labels. When parts of an

Interleaved 2 of 5 bar code are presented to the scanner with this feature

enabled, the bar code parts will be assembled by the scanner’s software,

and the data will be decoded if all bar code proofing requirements are

met.

START

STATE

BARCODE

Disable

Interleaved 2

of 5

Stitching

Enable Inter-

leaved 2 of 5

Stitching

END

Product Reference Guide

5-53

Symbologies

Interleaved 2 of 5 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Interleaved 2 of 5 label must be decoded before it is accepted as good

read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-54

PowerScan 7000 Linear Imager

Codabar

The following options apply to the Codabar symbology.

Disable/Enable Codabar

When this feature is disabled, the scanner will not read Codabar bar

codes.

Check Character Verification

When enabled, the scanner will verify the check character of the labels.

Check Character Transmit

Enable this option to transmit the check character with scanned bar code

data.

Product Reference Guide

5-55

Symbologies

Codabar — continued

START

STATE

BARCODE

Disable

Codabar

Enable

Codabar

Disable

Check Char

Verification

Enable

Check Char

Verification

Disable

Check Char

Transmission

Enable

Check Char

Transmission

END

5-56

PowerScan 7000 Linear Imager

Codabar

Codabar — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Codabar

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Codabar Length 1, Length 2 Pro-

gramming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Codabar

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Codabar

Length 1, Length 2 Programming Instructions below.

Product Reference Guide

5-57

Symbologies

Codabar — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

5-58

PowerScan 7000 Linear Imager

Codabar

Codabar — continued

Codabar Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Codabar bar codes, all start, stop, check

and data characters are included in the length

calculations.

NOTE

4. Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 03

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 50 decimal

END

Product Reference Guide

5-59

Symbologies

Codabar — continued

Quiet Zones

This feature enable/disables the requirement that quiet zones must be

present for Codabar bar codes.

START

STATE

BARCODE

Don’t require

Quiet Zones

Require Quiet

Zones

END

5-60

PowerScan 7000 Linear Imager

Codabar

Codabar — continued

Start/Stop Character Type

Codabar has four pairs of Start/Stop patterns. Select one pair to match

your application.

Start/Stop Character Transmission

The transmission of start and end characters of Codabar is selected

below.

Start/Stop Character Match

This feature enables/disables the requirement that start and stop charac-

ters match.

Product Reference Guide

5-61

Symbologies

Codabar — continued

START

STATE

BARCODE

Start/Stop

Type: ABCD/

TN*E

Start/Stop

Type: ABCD/

ABCD

Start/Stop

Type: abcd/tn*e

Start/Stop

Type: abcd/

abcd

Disable

Start/Stop Char

Transmission

Enable

Start/Stop

Char

Transmission

5-62

PowerScan 7000 Linear Imager

Codabar

Codabar — continued

START

STATE

BARCODE

Disable

Start/Stop

Char Match

Enable

Start/Stop Char

Match

END

Product Reference Guide

5-63

Symbologies

Codabar — continued

Codabar Stitching

Enables/disables stitching for Codabar labels. When parts of a Codabar

label are presented to the scanner with this feature enabled, the bar code

parts will be assembled by the scanner’s software, and the data will be

decoded if all bar code proofing requirements are met.

START

STATE

BARCODE

Disable

Codabar

Stitching

Enable

Codabar

Stitching

END

5-64

PowerScan 7000 Linear Imager

Codabar — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Codabar label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-65

Symbologies

Code 93

The following options apply to the Code 93 symbology.

Disable/Enable Code 93

When this feature is disabled, the scanner will not read Code 93 bar

codes.

START

STATE

BARCODE

Disable

Code 93

Enable

Code 93

END

5-66

PowerScan 7000 Linear Imager

Code 93

Code 93 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Code 93

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Code 93 Length 1, Length 2 Pro-

gramming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Code 93

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Code 93

Length 1, Length 2 Programming Instructions below.

Product Reference Guide

5-67

Symbologies

Code 93 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

5-68

PowerScan 7000 Linear Imager

Code 93

Code 93 — continued

Code 93 Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Code 93 bar codes, only the data characters

are included in the length calculations.

NOTE

4. Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 01

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 50 decimal

END

Product Reference Guide

5-69

Symbologies

Code 93 — continued

Code 93 Stitching

Enables/disables stitching for Code 93 bar codes. When parts of a Code

93 label are presented to the scanner with this feature enabled, the bar

code parts will be assembled by the scanner’s software, and the data will

be decoded if all bar code proofing requirements are met.

START

STATE

BARCODE

Disable

Code 93

Stitching

Enable

Code 93

Stitching

END

5-70

PowerScan 7000 Linear Imager

Code 93

Code 93 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Code 93 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-71

Symbologies

MSI/Plessey

The following options apply to the MSI/Plessey symbology.

Disable/Enable MSI/Plessey

When this feature is disabled, the scanner will not read MSI/Plessey bar

codes.

Check Digit Verification

This feature specifies whether one or two check digits are to be calcu-

lated and verified.

Check Digit Transmit

When this option is enabled, the scanner will transmit one-digit or two-

digit check digits, depending upon the setting for check digit verifica-

tion.

5-72

PowerScan 7000 Linear Imager

MSI/Plessey

MSI/Plessey — continued

START

STATE

BARCODE

Disable

MSI/Plessey

Enable

MSI/Plessey

Disable

Check Digit

Verification

Enable

Check Digit

Verification

1-Digit

Check Digit

Verification

2-Digit

Check Digit

Verification

Product Reference Guide

5-73

Symbologies

MSI/Plessey — continued

START

STATE

BARCODE

Disable

Check Digit

Transmission

Enable

Check Digit

Transmission

END

5-74

PowerScan 7000 Linear Imager

MSI/Plessey

MSI/Plessey — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the MSI/Plessey

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the MSI/Plessey Length 1, Length 2

Programming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the MSI/Plessey

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the MSI/Plessey

Length 1, Length 2 Programming Instructions below.

Product Reference Guide

5-75

Symbologies

MSI/Plessey — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

5-76

PowerScan 7000 Linear Imager

MSI/Plessey

MSI/Plessey — continued

MSI/Plessey Length 1, Length 2 Program-

ming Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For MSI/Plessey bar codes, all check and data

characters are included in the length calcula-

tions.

NOTE

Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 04

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 16 decimal

END

Product Reference Guide

5-77

Symbologies

MSI/Plessey — continued

MSI/Plessey Stitching

Enables/disables stitching for MSI/Plessey bar codes. When parts of an

MSI/Plessey label are presented to the scanner with this feature enabled,

the bar code parts will be assembled by the scanner’s software, and the

data will be decoded if all bar code proofing requirements are met.

START

STATE

BARCODE

Disable

MSI/Plessey

Stitching

Enable

MSI/Plessey

Stitching

END

5-78

PowerScan 7000 Linear Imager

MSI/Plessey

MSI/Plessey — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

MSI/Plessey label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-79

Symbologies

Standard 2 of 5

The following options apply to the Standard 2 of 5 symbology.

Disable/Enable Standard 2 of 5

When this feature is disabled, the scanner will not read Standard 2 of 5

bar codes.

Check Digit Verification

When enabled, the scanner will verify the check digit of the labels.

Check Digit Transmit

When this option is enabled, the scanner will transmit the check digit.

5-80

PowerScan 7000 Linear Imager

Standard 2 of 5

Standard 2 of 5 — continued

START

STATE

BARCODE

Disable

Std 2 of 5

Enable

Std 2 of 5

Disable

Check Digit

Verification

Enable

Check Digit

Verification

Disable

Check Digit

Transmission

Enable

Check Digit

Transmission

END

Product Reference Guide

5-81

Symbologies

Standard 2 of 5 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the Standard 2 of

5 Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘00’ if there is only

one fixed length) by following the Standard 2 of 5 Length 1, Length 2

Programming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the Standard 2

of 5 Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the Standard 2

of 5 Length 1, Length 2 Programming Instructions below.

5-82

PowerScan 7000 Linear Imager

Standard 2 of 5

Standard 2 of 5 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

Product Reference Guide

5-83

Symbologies

Standard 2 of 5 — continued

Standard 2 of 5 Length 1, Length 2 Pro-

gramming Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For Standard 2 of 5 bar codes, all check and

data characters are included in the length calcu-

lations.

NOTE

4. Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 08

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 50 decimal

END

5-84

PowerScan 7000 Linear Imager

Standard 2 of 5

Standard 2 of 5 — continued

Standard 2 of 5 Stitching

Enables/disables stitching for Standard 2 of 5 bar codes. When parts of a

Standard 2 of 5 label are presented to the scanner with this feature

enabled, the bar code parts will be assembled by the scanner’s software,

and the data will be decoded if all bar code proofing requirements are

met.

START

STATE

BARCODE

Disable

Std 2 of 5

Stitching

Enable

Std 2 of 5

Stitching

END

Product Reference Guide

5-85

Symbologies

Standard 2 of 5 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times a Stan-

dard 2 of 5 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

5-86

PowerScan 7000 Linear Imager

PDF 417

The following options apply to the PDF 417 symbology.

Disable/Enable PDF 417

When this feature is disabled, the scanner will not read PDF 417 bar

codes.

START

STATE

BARCODE

Disable

PDF417

Enable

PDF 417

END

Product Reference Guide

5-87

Symbologies

PDF 417 — continued

Length Control

Fixed Length Decoding — When fixed length decoding is enabled,

the scanner will decode a bar code if the label length matches one of the

configurable fixed lengths.

Variable Length Decoding — When variable length decoding is

enabled, the scanner will decode a bar code if the label length falls in the

range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the PDF 417

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the second fixed length (or to ‘0000’ if there is

only one fixed length) by following the PDF 417 Length 1, Length 2

Programming Instructions below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the PDF 417

Length 1, Length 2 Programming Instructions below.

5. Set Length 2 to the maximum length by following the PDF 417

Length 1, Length 2 Programming Instructions below.

5-88

PowerScan 7000 Linear Imager

PDF 417

PDF 417 — continued

START

MODE

BARCODE

Variable

Length

Decoding

Fixed Length

Decoding

END

Product Reference Guide

5-89

Symbologies

PDF 417 — continued

PDF 417 Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to Appendix C, Alpha-Numeric Pad and scan the two digits rep-

resenting the length in decimal notation.

For PDF 417 bar codes, only the data characters

are included in the length calculations.

NOTE

Scan the END bar code.

SETTING

BARCODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 01

Set Length 2

DEFAULT SETTING FOR THIS FEATURE:

600 decimal

END

5-90

PowerScan 7000 Linear Imager

PDF 417

PDF 417 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times a PDF

417 label must be decoded before it is accepted as good read.

START

READS

BARCODE

Minimum =

1 Read

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

Product Reference Guide

5-91

Symbologies

NOTES

5-92

PowerScan 7000 Linear Imager

Appendix A

Product Specifications

Optical and Read Performance

Parameters

Parameter

Specification

2” wide at 1” from scanner

6” wide at 7” from scanner

Scanning Width

4mil minimum element size

(at some distance, no implied DOF)

Minimum Resolution

5 mil — 3 to 6”/7.6 to 15.2 cm

7.5 mil — 2 to 16”/5.1 to 40.6 cm

10 mil — 1.5 to 22”/3.8 to 55.9 cm

13 mil — 1 to 30”/2.5 to 76.2 cm

20 mil — 1 to 42”/2.5 to 106.7 cm

55 mil — 2 to 80”/5.1 to 203.2 cm

Depth of Field

(75% read rate; 90% PCS;

Code 39 with 2.5:1 W/N

ratio except for 13 mils)

Minimum distance determined by symbol

length and scan angle. Printing resolution, con-

trast and ambient light dependent.

13 mil DOF based on UPC. All others are Code

39. All labels grade A, minimum illumination:

300 Lux, 20° C, label perpendicular to the opti-

cal axis.

Minimum Print Contrast Ratio

20%

60°

65°

40°

Skew^a(Yaw)

Pitch^a.

Roll^a.

a. DOF will be reduced whenever the label is not perpendicular to the optical

axis.

Product Reference Guide

A-1

Physical Properties

Parameter

Specification

Dimensions (Typical):

Height

7.5”/190 mm

Length

4.5”/115 mm

3.0”/75 mm

Width

Weight

10 ounces/284 g (without cable)

+4 to 14 VDC +/- 5%

Voltage Requirements

Electrical Parameters

Parameter

Specification

Input Voltage

Input Power

+4 to 14 VDC

Maximum Operating Power

Typical Operating Power

Typical Standby Power

2.4 W

1.4 W

1 w

Input Current

Maximum Operating Current

Typical Operating Current

Typical Standby Current

Sleep Mode Current

480 mA @ 5VDC

270 mA @ 5VDC

210 mA @ 5VDC

Less than 1 mA

A-2

PowerScan 7000 Linear Imager

Environmental Parameters

Parameter

Specification

50 drops from 6.5 feet (2 meters) to concrete

-22° F to 122° F (-30° C to +50° C)

Scanners:

Mechanical Shock

Spray/rain — IEC 529-IPX5DW

Dust/particulate — IEC 529-IP6XDW

Contaminants

Spray/rain

Dust/particulate

Base Stations and Charger:

Spray/rain — IEC 529-IPX4DW

Dust/particulate — IEC 529-IP5XDW

Temperature Ranges:

Operating

-22° F to +122° F (-30° C to +50° C) Corded

-4° F to +122° F (-20° C to +50° C) RF

Storage

Humidity

-40° F to +140° F (-40° C to + 60°C)

0 to 95% non-condensing

Beeper/Speaker

Vibration

87 dBA for operator at a distance of 19” (50cm)

Meets MIL-STD-810F

Other Parameters

Parameter

Specification

Warranty

MTBF

3 years

55,000 hours

Product Reference Guide

A-3

NOTES

A-4

PowerScan 7000 Linear Imager

Appendix B

Cable Pinouts

Standard Cable Pinouts (Primary

Interface Cables)

RS-232

CTS

10 Position RJ

RTS

RXD

TXD

(Scanner End)

Pin 1

VCC IN

GND

10 Cable Select

IBM Port 5B/9B/17

10 Position RJ

DATA -

DATA +

(Scanner End)

Pin 1

VCC_IN

GND

Product Reference Guide

B-1

Cable Pinouts

IBM USB

10 Position RJ

D -

D +

(Scanner End)

Pin 1

VIN

GND

USB & USB Keyboard

10 Position RJ

D -

D +

(Scanner End)

Pin 1

VBUS_VIN

GND

Wand Emulation

10 Position RJ

WAND~

(Scanner End)

Pin 1

VCC_IN

GND

B-2

PowerScan 7000 Linear Imager

Standard Cable Pinouts (Primary Interface Cables)

Keyboard Wedge

KB_DATA

AT_CLK

KB_CLK

10 Position RJ

AT_DATA

(Scanner End)

Pin 1

VCC_IN

GND

Product Reference Guide

B-3

Cable Pinouts

NOTES

B-4

PowerScan 7000 Linear Imager

Appendix C

Alpha-Numeric Pad

Product Reference Guide

C-1

Alpha-Numeric Pad

C-2

PowerScan 7000 Linear Imager

Appendix D

Default Settings

Defaults by Symbology

The following is a partial list of key settings for each symbology type.

Checksum

Verification

Enable

Checksum

Transmission

Enable

Read

Enable

Label

Code Type

✓

UPC-A

UPC-E

EAN-13

EAN-8

RSS-14

RSS Expanded

Code 39

✓

PharmaCode 39

Code 128

Interleaved 2 of 5

Codabar

✓

Code 93

MSI/Plessey

Standard 2 of 5

PDF417

✓

Product Reference Guide

D-1

Interface Default Exceptions

The factory default settings indicated in the programming sections (by

bold text and yellow highlighting) reflect factory configuration for the

RS-232 standard interface. The following tables list default exceptions

by interface for the remaining available interfaces.

IBM Interfaces

IBM Interfaces include IBM-USB, IBM Port 9B, IBM Port5B and IBM

Port17.

Parameter

IBM Interface Type

Default Setting

IBM Port 9B

Number of Host Transmit Buffers

Label I.D. Transmission

Suffix Characters

One Buffer

Disable

No Suffix

D-2

PowerScan 7000 Linear Imager

Interface Default Exceptions

RS-232 Wincor/Nixdorf

Parameter

Default Setting

Interface Type

RS-232-WN

Number of Host Transmit Buffers

RS-232 Parity

One Buffer

Odd

RS-232 Hardware Control

UCC/EAN-128 Label ID

Code 93 Label ID

CTS Flow Control

‘P’

‘L’

Code 128 Label ID

Codabar Label ID

‘K’

‘N’

‘B’

‘F’

‘A’

‘I’

EAN-8 Label ID

EAN-13 Label ID

ISBN Label ID

Interleaved 2 of 5 Label ID

Standard 2 of 5 Label ID

MSI/Plessey Label ID

UPC-E Label ID

‘H’

‘O’

‘C’

‘Q’

‘E’

PDF 417 Label ID

RSS-14 Label ID

RSS Expanded Label ID

Product Reference Guide

D-3

Keyboards

Keyboard interfaces include USB Keyboard and Keyboard Wedge A-Y.

Parameter

Default Setting

USB Keyboard

Keyboard Wedge Interface Type

Label ID Transmission

Disable

D-4

PowerScan 7000 Linear Imager

Appendix E

Keyboard Function

Key Mappings

Keyboard Model Cross Reference

Table E-2 summarizes the keyboard models, their defined protocol,

scancode set, and some unique features. The remaining tables in this

chapter provide the function key maps associated with each of the scan-

code sets.

Product Reference Guide

E-1

Table E-1. Keyboard Model Cross Reference

Func.

Scancode Key

Trans-

I/F ID mission

Protocol

Use

Country

Mode

Model Type

Set

Map

Support

PC/XT Foreign ALT Mode

AT;

PS/2 25-286;

Wedge A PC/XT Scan Set 1 No

PS/2 30-286;

PS/2 50, 50Z;

Wedge B AT/PS2 Scan Set 2 No

PS/2 60,70,80,90,95

Foreign ALT Mode

PS/2 25 and 30

Foreign ALT Mode

PC/XT U.S. Mode

AT;

Wedge C AT/PS2 Scan Set 1 No

Wedge D PC/XT Scan Set 1 Yes

PS/2 25-286;

PS/2 30-286;

PS/2 50, 50Z;

Wedge E AT/PS2 Scan Set 2 Yes

Yes

PS/2 60,70,80,90,95

U.S. Mode + specific

country support

PS/2 25 and 30

U.S. Mode

Wedge F AT/PS2 Scan Set 1 Yes

Wedge G AT/PS2 Scan Set 3 Yes

IBM 3xxx Terminals

(122-key keyboard)

IBM 3xxx Terminals

(102-key keyboard)

PS55 5530T with

JAPANESE DOS (TDOS)

Wedge H AT/PS2 Scan Set 3 Yes

Japanese

DOS

Wedge I AT/PS2

Yes

NEC

Wedge J

NEC 9801

NEC 9801 Yes

9801

E-2

PowerScan 7000 Linear Imager

Keyboard Model Cross Reference

Table E-2. Scanset 1 Function Key Map

ASCII

(hex)

ASCII code

Key

Scancode

E0h 38h

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

ALT right Make

ALT right Break

ALT left Make

ALT left Break

CTRL left Make

CTRL left Break

E0h B8h

38h

B8h

1Dh

9Dh

CTRL right Make

E0h 1Dh

E0h 9Dh

0Eh

CTRL right Break

TAB right

0Fh

RIGHT arrow (inner keypad)

TAB left

4Dh + E0

0Fh + S

1Ch + E0

1Ch

Enter (inner keypad)

INSERT (inner keypad)

PAGE UP (inner keypad)

PAGE DOWN (inner keypad)

HOME (inner keypad)

LEFT arrow (inner keypad)

DOWN arrow (inner keypad)

UP arrow (inner keypad)

52h + E0

49h + E0

51h + E0

47h + E0

4Bh + E0

50h + E0

48h + E0

DLE

DC1

DC2

DC3

DC4

Product Reference Guide

E-3

Table E-3. Scanset 2 Function Key Map

ASCII

(hex)

ASCII code

Key

Scancode

E0h 11h

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

ALT right Make

ALT right Break

ALT left Make

ALT left Break

CTRL left Make

E0h F0h 11h

11h

F0h 11h

14h

CTRL left Break

CTRL right Make

F0h 14h

E0h 14h

E0h F0h 14h

66h

CTRL right Break

TAB right

RIGHT arrow (inner keypad)

0Dh

74h + E0

0Dh + S

5Ah + E0

5Ah

TAB left

Enter (right keypad)

INSERT (inner keypad)

70h + E0

7Dh + E0

7Ah + E0

6Ch + E0

6Bh + E0

72h + E0

75h + E0

0Bh

PAGE UP (inner keypad)

PAGE DOWN (inner keypad)

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

HOME (inner keypad)

LEFT arrow (inner keypad)

DOWN arrow (inner keypad)

UP arrow (inner keypad)

05h

06h

04h

0Ch

SUB

ESC

03h

76h

ESC

83h

0Ah

01h

09h

F10

E-4

PowerScan 7000 Linear Imager

Keyboard Model Cross Reference

Table E-4

Scanset 3, 102-Key Function Key Map

Key

ASCII (hex) ASCII code

Scancode

39h

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

ALT right Make

ALT right Break

ALT left Make

ALT left Break

CTRL left Make

F0h 39h

19h

F0h 19h

11h

CTRL left Break

CTRL right Make

F0h 11h

58h

CTRL right Break

F0h 58h

66h

0Dh

TAB right

RIGHT arrow (inner keypad)

6Ah

TAB left

Enter (inner keypad)

0Dh + S

79h

5Ah

INSERT (inner keypad)

67h

6Fh

PAGE UP (inner keypad)

PAGE DOWN (inner keypad)

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

6Dh

6Eh

HOME (inner keypad)

LEFT arrow (inner keypad)

61h

60h

DOWN arrow (inner keypad)

UP arrow (inner keypad)

63h

2Fh

07h

0Fh

17h

1Fh

SUB

ESC

27h

08h

ESC

37h

3Fh

47h

4Fh

F10

Product Reference Guide

E-5

Table E-5. Scanset 3 122-Key Function Key Map

ASCII (hex) ASCII code Key

Scancode

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

ALT Right Make

ALT Right Break

ALT left Make

ALT left Break

39h

F0h 39h

19h

F0h 19h

11h

CTRL left (RESET) Make only

CTRL left (RESET) Make/Break

11h F0h 11h

58h

ONLINE Enter Make only

ONLINE Enter Make/Break

58h F0h 58h

66h

0Dh

TAB right

RIGHT arrow (inner keypad)

TAB left

6Ah

0Dh + S

5Ah F0h 5Ah

5Ah

CR (FIELD EXIT) Make only

CR (FIELD EXIT) Make/Break

INSERT (inner keypad)

FIELD +

65h

79h

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

FIELD -

HOME (inner keypad)

7Ch

62h

LEFT arrow (inner keypad)

DOWN arrow (inner keypad)

61h

60h

UP arrow (inner keypad)

63h

2Fh

07h

0Fh

17h

1Fh

SUB

ESC

27h

08h

ESC

37h

3Fh

47h

4Fh

F10

E-6

PowerScan 7000 Linear Imager

Keyboard Model Cross Reference

Table E-6. Japanese DOS Function Key Map

ASCII value

ASCII code

Key

ALT right Make

ALT right Break

Scancode

00h

01h

02h

03h

04h

05h

06h

07h

08h

09h

0Ah

0Bh

0Ch

0Dh

0Eh

0Fh

10h

11h

12h

13h

14h

15h

16h

17h

18h

19h

1Ah

1Bh

1Ch

1Dh

1Eh

1Fh

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

31h

B1h

31h

ALT left Make

ALT left Break

B1h

41h

CTRL left Make

CTRL left Break

C1h

41h

CTRL right Make

CTRL right Break

C1h

3Eh

3Ch

4Dh

3Ch + S

60h

TAB right

RIGHT arrow (inner keypad)

TAB left

Enter (right keypad)

3Bh

52h

INSERT (inner keypad)

PAGE UP (inner keypad)

49h

51h

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

PAGE DOWN (inner keypad)

HOME (inner keypad)

4Ch

4Bh

4Ah

4Eh

6Dh

68h

LEFT arrow (inner keypad)

DOWN arrow (inner keypad)

UP arrow (inner keypad)

69h

6Ah

6Bh

6Ch

3Dh

6Eh

6Fh

70h

SUB

ESC

F10

71h

Product Reference Guide

E-7

Table E-7. NEC 9801-Key Function Key Map

ASCII value

ASCII code

Key

Scancode

00h

01h

02h

03h

04h

05h

06h

07h

08h

09h

0Ah

0Bh

0Ch

0Dh

0Eh

0Fh

10h

11h

12h

13h

14h

15h

16h

17h

18h

19h

1Ah

1Bh

1Ch

1Dh

1Eh

1Fh

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

unused

CAPS LOCK ON (make)

n/a

1Ch

71h

F1h

74h

F4h

60h

n/a

CAPS LOCK OFF (break)

CTRL left Make

CTRL left Break

CTRL-C

n/a

0Eh

0Fh

3Ch

0Fh + S

39h

1Ch

38h

72h

F2h

3Eh

3Bh

3Dh

3Ah

67h

62h

63h

64h

65h

66h

00h

68h

69h

6Ah

6Bh

TAB right

RIGHT arrow (inner keypad)

TAB left

DELETE

INSERT (inner keypad)

KATAKANA LOCK ON (Make)

KATAKANA LOCK OFF (Break)

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

HOME (inner keypad)

LEFT arrow (inner keypad)

DOWN arrow (inner keypad)

UP arrow (inner keypad)

SUB

ESC

F10

E-8

PowerScan 7000 Linear Imager

Appendix F

Host Commands

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:

COMMAND

ASCII

HEX

COMMENT

Enable Scanner

0x45

Disable

Scanner

0x44

0x52

0x46

Reset Scanner

Not On File

Indication

Long series of beeps

Beep Good

Read Tone

0x42

Beeps if Good Read Beep is enabled

Force Good

Read Tone

0x01

0x07

0x69

Beeps regardless of beep setting

Force Good Read Tone

Bel

Identification

request

Returns long response^a

Health request

0x68

0x73

Status request

a. Call Tech Support for information.

If one of the above commands is received, the scanner will perform the

steps indicated for the command. Host commands for other interfaces is

also available. Contact Tech Support for more details.

Product Reference Guide

F-1

NOTES

F-2

PowerScan 7000 Linear Imager

Appendix G

Sample Symbols

UPC-A

Interleaved 2 of 5

0 123456 7890

1234567890

Code 128

EAN-13

Code 128

Code 39

9 780330 290951

Codabar

BC321

Code 93

A13579B

Code 2 of 5

123456-9$

123456

Product Reference Guide

G-1

Sample Symbols

PDF417

Car Registration

RSS-14

(01)00123456789012

RSS Expanded

0100123456789050

G-2

PowerScan 7000 Linear Imager

ASCII Chart

ASCII

Char.

ASCII

Char.

ASCII

Hex No.

ASCII

Char.

Hex

No.

Hex No.

Char.

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

‘

“

’

(

)

[

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

{

SUB

ESC

;

]

}

DEL

Asia Pacific

Italy

PSC Hong Kong

PSC S.p.A.

Hong Kong

Vimercate (MI), Italy

Telephone: [39] (0) 39/62903.1

Fax: [39] (0) 39/6859496

Telephone: [852]-2-584-6210

Fax: [852]-2-521-0291

Australia

Japan

PSC Asia Pacific Pty Ltd.

North Ryde, Australia

Telephone: [61] 0 (2) 9878 8999

Fax: [61] 0 (2) 9878 8688

PSC Japan K.K.

Shinagawa-ku, Tokyo, Japan

Telephone: 81 (0)3 3491 6761

Fax: 81 (0)3 3491 6656

France

Latin America

PSC S.A.R.L.

PSC S.A., INC.

LES ULIS Cedex, France

Telephone: [33].01.64.86.71.00

Fax: [33].01.64 46.72.44

Miami, Florida, USA

Telephone: (305) 591-3222

Fax: (305) 591-3007

Germany

United Kingdom

PSC GmbH

PSC Bar Code Ltd.

Darmstadt, Germany

Telephone: 49 (0) 61 51/93 58-0

Fax: 49 (0) 61 51/93 58 58

Watford, England

Telephone: 44 (0) 1923 809500

Fax: 44 (0) 1923 809 505

www.psc.com

PSC Inc.

959 Terry Street

Eugene, OR 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

R44-2530 (Rev. X3)

1/06

Symbol Technologies Ls 1000 User Manual
Samsung Avmbh020ea B 0 User Manual
Samsung Am20b1 B2 E06 User Manual
Precisionaire High Temperature Rigid Filter Pb1003 User Manual
Porter Cable 885942 699 User Manual
Panasonic Kx Pw308dw User Manual
Lexmark X860 User Manual
DELL S2418H User Manual
DATAVIDEO PTR 10T MARK II User Manual
ASUS TRAVELMATE P6 User Manual