FUSION TV M220DVD User Manual

User / Installation Manual  
Marine HD Widescreen  
LCD Television With DVD  
TV-M160DVD, TV-M190DVD, TV-M220DVD  
Contents  
Connections And Setup  
Remote Control  
Button Description  
Antenna Connection  
AV Connection  
2
3
4
4
4
S-Video Connection  
Y Pb Pr Connection  
VGA Connection  
HDMI Connection  
USB Connection  
Menu Operation  
EPG (Electronic Program Guide)  
Source Selection  
Channel  
4
5
5
5
5
6
6
6
7
Picture  
8
Time  
9
Sound  
10  
10  
11  
11  
12  
13  
13  
Options  
Lock  
Media Play Function (DMP)  
Personal Video Recorder (PVR) File System  
Specifications  
Troubleshooting  
Connections And Setup  
Thank you very much for your purchase of this product. Please read this manual carefully and keep it safe for reference.  
Please use the power cord designated for the product. When an extension cord is required, use one with the correct power rating. The cord must be grounded. The product should  
be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. If you would like to mount the TV to  
the wall, please see “Preparing the LCD for Wall Mounting” below for additional information. Avoid installing the product in the kitchen, bathroom or other places with high humidity.  
Preparing Your LCD TV For Wall Mounting  
The HDTV can either be kept on the stand or mounted to the wall for viewing. If you  
choose to mount the HDTV to the wall, please follow the instructions below .  
Important Notes  
RESET: Like any product controlled by microprocessors this TV may hang or become  
unresponsive, in the unlikely event this occurs simple disconnect the power and  
reconnect after 10 seconds.  
» Unplug all the cables and cords from your LCD TV.  
REMOTE: To prevent leakage which may result in bodily harm or damage to the remote:  
1. Install AAA batteries correctly, and make sure polarities are correctly aligned with  
the battery compartment markings.  
2. Do not mix batteries (OLD and NEW or CARBON and ALKALINE ,etc)  
3. Remove batteries when the remote is not used for a long time.  
» Place the LCD TV face down on a soft and flat surface (blanket, foam, cloth, etc) to  
prevent any damage to the display.  
» Remove the stand screws allowing the stand to be removed.  
» The mounting bracket is made up of two parts - the wall bracket and the TV  
My music, movie or image files do not display?  
bracket. Attach the TV bracket to the TV via the included screws.  
Due to the large variation of file sizes, compression formats and codec available,  
playback of all files cannot be guaranteed.  
» Attach the wall bracket to the wall with appropriate screws. Ensure the wall is  
suitable to hold the weight of the TV.  
I cannot record onto my USB flash drive?  
FAT 32 formatted flash drive is required.  
» Slide the TV bracket into the wall bracket.  
Time Shift functionality does work work?  
FAT 32 formatted flash drive is required.  
Warning! Do not keep images on the screen for a long time  
To prevent the screen from burn in, do not leave static images including menu screens  
displayed for a period of time. Burn in is not covered under warranty provision.  
ATTENTION: Do not try to update the TV unless directed by a service technician.  
Product misconfigured by an incorrect update is not covered under warranty.  
PUBLISHED BY FUSION ELECTRONICS LIMITED. © Copyright 2010 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice.  
YOU CAN HELP PROTECT THE ENVIRONMENT Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal centre. v3.2  
POWER - Switch between Standby and On  
TIME SHIFT - Pause live TV. Press in DTV source to activate the Time Shift function.  
(Requires USB flash drive connection)  
AUTO - AUTO adjust resolution refresh rate in VGA mode.  
MUTE - Press to mute the audio. Press again or press VOL+ to resume.  
P.MODE - Select the picture mode.  
Remote Control  
S.MODE - Select the audio mode.  
AUDIO - Press to change the language of the audio in DTV or DVD source.  
I/II - Select NICAM mode. Only available in TV programs with NICAM transmission.  
Default mode is mono.  
NUMBER BUTTONS - Press 0-9 to select a TV channel directly when watching TV.  
The channel changes after 2 seconds or press ENTER button to change immediately.  
REC MENU - Press to enter recorded files menu.  
Return to the previously viewed program.  
GOTO - In DVD source press to cycle to a desired position.  
SLEEP - Set the TV to turn off after a specified time.  
ASPECT - Select the screen aspect.  
SOURCE - Select the TV source.  
////ENTER - Allows you to navigate the on-screen menus and adjust  
the system settings to your preference.  
Eject in DVD source.  
Press in Time Shift mode to minimise onscreen display  
D.MENU - Display the DVD menu.  
SETUP - DVD menu setup.  
D.DISP - Press to cycle the DVD disc information.  
DISPLAY - IN DTV source press to show and minimise onscreen program information.  
EXIT - Exit the menu or sub menu.  
MENU - Access the on-screen menu.  
CH+/- - Press to change channel.  
VOL+/- - Press to increase or decrease volume.  
MEDIA - Access DMP menu.  
REC - Press to record the program immediately.  
►II - Play/pause  
- Stop playing  
A-B - Repeat the segment between A and B  
REPEAT - Press to change the playing mode  
◄◄/►► - Play fast backward/forward  
I◄◄/►►I - Play previous/next media file  
EPG - Press to display EPG information (Electronic Program Guide).  
FAV - Press to display favorite programs.  
SUBTITLE - Select subtitle language.  
TV/RADIO - Press to switch between DTV and radio programs.  
TITLE - Press to display Title information.  
TEXT - Press to turn the Teletext On and Off. Note: The following buttons are for  
use in teletext mode  
INDEX - Press to return to the index/initial page.  
MIX - Press to display the picture and the teletext at the same time  
HOLD - HOLD On or Off the current page display  
SUBPAGE - Display a sub-page of upper options  
REVEAL - Reveal or Hide the hidden words.  
SIZE - Change the size of display in Teletext mode  
CANCEL - Press to return to TV mode while teletext searches’ for a page. When the  
required page is found ,the page number will appear at the top of the TV picture,  
press again to return to teletext.  
Button Description  
AV Connection  
» Press V O L- or VOL+ to decrease or increase the sound level.  
» Press CH- or CH+ to scan through channels.  
» Press MENU to bring up the main menu screen.  
» Press SOURCE to select the input source.  
» Press to play/pause  
» Press to eject the disc  
» Press POWER button to alternate between standby and ‘on’ modes.  
Red light indicates TV is in standby mode, Green indicates TV is on.  
POWER: DC 12V input  
HDMI: Connect the HDMI output jack of DVD  
VGA: Connect the PC-RGB output jack of PC  
S-VIDEO: Connect the S-VIDEO output jack of DVD or VCR  
VIDEO: Connect the video output jack of DVD or VCR  
PC AUDIO INPUT: Connect the audio output jack of PC audio.  
EARPHONE: Connect the headphone  
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks using  
the RCA cable (Yellow [Video], White and Red [left and right audio]).  
Select the AV input source using the SOURCE button on the remote.  
RF IN: Connect the antenna  
S-Video Connection  
USB: Connect the USB flash drive to play multimedia files  
Y/Pb/Pr IN: Connect component Video  
Antenna Connection  
To ensure good picture and sound, a Terrestrial TV antenna system needs to be  
installed.  
Connect the S-VIDEO output jack of the DVD or VCR to the S-VIDEO jacks.  
Connect the AUDIO output jack of the DVD or VCR to the Audio In jacks using the RCA  
cable.  
Video / Audio Out  
Select the S-Video input source using the SOURCE button on the remote.  
Connect the AUDIO output from the television to the AUX input of the device using  
the RCA cable (White and Red [left and right audio]).  
Y Pb Pr Connection  
HDMI Connection  
Connect the Y Pb Pr output of the accessory device to the Y Pb Pr input on the TV. The  
Connect the HDMI output of the accessory device to the HDMI input on the TV.  
picture quality is improved, compared to connecting a regular VCR video input.  
Select the HDMI input source using the SOURCE button on the remote.  
Connect the Audio output of the accessory device to the Audio input jacks on the TV  
using the RCA cable.  
Select the Y Pb Pr input source using the SOURCE button on the remote.  
VGA Connection  
USB Connection  
Insert the USB flash drive into the USB slot on the TV.  
Select the USB input source using the MEDIA button on the remote.  
Connect the RGB output of the PC to the VGA input on the TV.  
Connect the PC audio output of the PC to the PC Audio input jacks on the TV  
Select the VGA input source using the SOURCE button on the remote.  
Menu Operation  
Menu Operation  
Source Selection  
This section explores the menus of your TV. Each menu is outlined and detailed to  
help you get the most from your TV.  
To access the input sources press SOURCE on the remote.  
» Press /to move the cursor  
To access the main menu page press MENU on the remote.  
» Press OK to confirm your selection  
Press /to cycle through the seven main functions below:  
»
»
»
»
»
»
CHANNEL  
PICTURE  
SOUND  
TIME  
OPTION  
LOCK  
EPG (Electronic Program Guide)  
Only available for DTV source.  
» Press EPG on remote to enter menu  
» Follow on screen instructions for EPG control and navigation.  
Channel  
Press MENU button on the remote to enter the CHANNEL page below:  
ATV Manual Tuning  
Input source is ATV, operate as below:  
» From the CHANNEL menu select ATV Manual Tuning  
» Select Storage To 1 and enter channel that you wish to store program to (1-100).  
» Select System DK and select TV system.  
» Select Search to start ATV Manual Tuning. To interrupt press MENU or Exit  
» Select Fine Tune and use /to fine tune program  
Auto Tuning:  
ATV and DTV auto program, operate as below:  
» Select Auto Tuning and press OK .  
» To return to previous page press MENU or Exit  
» To interrupt tuning, press MENU or Exit. The below confirmation screen will appear.  
Press to confirm exit, or to continue tuning.  
Program Edit  
» From the CHANNEL menu select Program Edit  
» Select the program using /and press the following:  
Delete Program: Delete selected program  
DTV Manual Tuning  
Input source is DTV, operate as below:  
Rename Program: Edit program name  
Reorder Program: Select first program and then select the second program.  
The two programs will swap order.  
»
From the CHANNEL menu select  
DTV Manual Tuning  
Skip Program: Select program to be skipped.  
»
Select channel number by  
Favourite: Press the remote  
FAV button to activate. Select program to add  
pressing /►  
to favourite list.  
»
Press ENTER to search  
Signal Information  
Displays the signal information of current program.  
» From the CHANNEL menu select Signal Information  
Picture  
Press MENU button on the remote and /use to cycle to PICTURE page below:  
Aspect Ratio:  
» From the PICTURE menu select Aspect Ratio  
» Press /to select Aspect Ratio: Auto, 4:3 andFull.  
Picture Mode:  
» Select Picture Mode  
» Press or to cycle through available picture modes:  
Standard, Mild, User andDynamic.  
Note: Contrast, Brightness, Color and Sharpness can only be changed under User.  
Noise Reduction:  
» From the PICTURE menu select Noise Reduction  
» Press /to select Noise Reduction: Off, Low, Middle, High andDefault.  
Color Temperature:  
» From the PICTURE menu select Color Temperature  
Screen:  
» From the PICTURE menu select Screen  
» Press or to cycle through available color temperature modes:  
Medium, User, Warm andCool.  
» Press /to select Screen Options:  
Note: Red, Green, and Blue can only be changed under User.  
Auto Adjust, Horizontal Position, Vertical Position, Size andPhase.  
Time  
Press MENU button on the remote and /use to cycle to TIME page below:  
Off Time:  
Set TV system to turn off automatically.  
» From the TIME menu select Off Time  
» Press or to select Off Time mode:  
Off, Once, Every Day, Mon - Fri, Mon - Sat, Sat -Sun orSunday  
» Set the Hour and Minute  
Clock:  
Set TV system time settings  
» Select Clock  
» Press or to cycle through available clock settings:  
Date, Month, Year, Hour andMinute.  
On Time:  
Set TV system to turn on automatically.  
» From the TIME menu select On Time  
» Press or to select On Time mode:  
Off, Once, Every Day, Mon - Fri, Mon - Sat, Sat -Sun orSunday  
» Set the Hour and Minute  
» Select the input source  
» If ATV or DTV source is selected, also select the program number  
» Select the Volume setting at turn on  
Sleep Timer:  
» From the TIME menu select Sleep Timer  
» Select Sleep Timer setting:  
Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min or240min  
Auto Sleep:  
» From the TIME menu select Auto Sleep.  
» Select ON or OFF  
Time Zone:  
» From the TIME menu select TIME ZONE.  
» Select your Time Zone  
Sound  
Options  
Press MENU button on the remote and /use to cycle to SOUND page below:  
Press MENU button on the remote and /use to cycle to OPTION page below:  
Sound Mode:  
» Select Sound Mode  
OSD Language:  
Set current menu language  
» Select OSD Language  
» Press or to cycle through available sound modes:  
Standard, Music, Movie, Sports andUser.  
Note: Treble and Bass can only be changed under User.  
Audio Language:  
Set audio language  
» Select Audio Language  
» Press or to cycle through available languages:  
Subtitle Language:  
Set subtitle language  
» Select Subtitle Language  
» Press or to cycle through available languages:  
Hearing Impaired:  
» Select Hearing Impaired  
» Select ON or OFF  
Adjust Balance:  
» From the SOUND menu select Balance  
Auto Volume:  
» From the SOUND menu select Auto Volume.  
» Select ON or OFF  
PVR File System:  
(Reference ‘PVR File System’ on following page)  
Restore Factory Default:  
» Select Restore Factory Default to restore to initial settings  
Lock  
Media Play Function (DMP)  
Press MENU button on the remote and /use to cycle to LOCK page:  
Access media files (Photo’s, Music, Movie’s and Text) via the TV’s USB port.  
Note: All options are initially greyed out until password is entered (see below)  
Press MEDIA button on the remote.  
Lock System:  
Set TV system time settings  
Picture:  
Supported picture formats include .jpg/jpeg and .gif  
The image should be no bigger than 3000 x 3000 pixels.  
» Select Lock System  
» Enter factory default password (0000)  
Set Password:  
» From the LOCK menu select SET PASSWORD  
» Change password from factory default (above):  
Block Program:  
» From the LOCK menu select Block Program.  
» Select Photo source  
» Select channels to block and require password to watch.  
» Use or to select C and enter photo view list  
» Select the desired Photo/s  
» Press play to view  
Parental Guidance:  
» From the LOCK menu select Parent Guidance.  
» Select age restriction  
Music:  
Supported music formats include .mp3  
» Select Music source  
» Use or to select C and enter music view list  
» Select the desired music track/s  
» Press play to begin playback  
Movie:  
Supported movie formats include .mpg, .vob, .avi, mp4 and .dat  
The maximum matrix is below MPEG2 MA/ML.  
» Select Movie source  
» Use or to select C and enter movie view list  
» Select the desired movie.  
» Press play to begin playback  
Text:  
Supported text format is .txt  
» Select Text source  
» Use or to select C and enter text view list  
» Select the desired text.  
PVR File System  
(Only for DTV source)  
The PVR File System Menu Description  
SELECT DISK: Select the PVR file system disk  
Check PVR File System: Check the disk file format.  
USB Disk: Display the USB Disk activation status, “PASS” flag is activation  
Format: Format the USB device, create PVR file system format on the USB device  
Time Shift Size: Show the TSR capacity information  
Speed: Read and write speed.  
Free Record Limit: Set the recording set-up time, unit is hours.  
Digital Video Record  
» Insert a USB device and enter the PVR File System page.  
» Select Check PVR File System, if USB device not previously formatted the system will  
automatically prompt USB disk formatting.  
» The size of the USB device affects the recording time available.  
» To record a DTV program press the  
button. The recording will continue until  
the Stop button is pressed or the USB device is full.  
» Press the button to shrink the on-screen information.  
» Pressing the REC MENU button will open the recorded program page.  
» Recorded Programs can be viewed or deleted.  
Important Recording Information  
» The USB device must be at least 1 GB.  
» When formatting a USB device all contents will be deleted. Formatting will fail if  
the USB device contains a virus or any other defect.  
» PVR function is only available in DTV source  
» USB device must be compatible USB 2.0 HS specification.  
Specifications  
TV-M160DVD  
TV-M190DVD  
TV-M220DVD  
Screen size, visible  
16” Wide Screen TFT LCD  
19” Wide Screen TFT LCD  
22” Wide Screen TFT LCD  
Screen Format  
16:9  
16:9  
16:9  
Resolution  
1366 x 768 Pixel  
1366 x 768 Pixel  
1366 x 768 Pixel  
Max. contrast ratio  
Brightness (Typical)  
Response Time (Typical)  
Display Colours  
500:1  
1000:1  
1000:1  
250 cd/m2  
250 cd/m2  
300 cd/m2  
8ms  
5ms  
5ms  
16.7M  
16.7M  
16.7M  
Viewing Angle (Typical)  
Power Supply  
H:90˚, V:65˚  
H:170˚, V:160˚  
H:170˚, V:160˚  
110-240V AC, 12V DC 5 metre cable  
110-240V AC, 12V DC 5 metre cable  
110-240V AC, 12V DC 5 metre cable  
Power Consumption  
Standby Power Dissipation  
Colour System  
30W  
48W  
52W  
1W  
1W  
1W  
PAL  
PAL  
PAL  
Sound System  
BG/DK/I  
PAL/SECAM/NTSC  
BG/DK/I  
PAL/SECAM/NTSC  
BG/DK/I  
PAL/SECAM/NTSC  
AV Playback  
All Models Feature:  
» PVR functionality (record digital TV)**  
» Closed Caption Decoder  
» Conformal coated PCB  
» Component and Composite video inputs  
» VGA port for connection to a PC  
» S-Video  
» Parental Lock  
» Built-in DVD/CD drive  
» Sleep Timer  
» Built in DVB-T digital tuner  
» HDMI input for true digital connection  
» USB connection for digital media playback  
» Built in speakers (4W x 2)  
» Wall mounting bracket included  
» Multi-language On-screen display  
Troubleshooting  
PROBLEM  
SOLUTION  
No picture or sound  
Check the power supply is plugged in and turned on.  
Picture is OK but no sound  
Remote control doesn’t work  
No TV Signal  
Make sure the volume is not set to minimum or mute. Turn off the TV and turn back on.  
Check the battery connection is correct. Check the batteries. Make sure no obstacles are between the sensor of the remote and TV  
Check the source is set to ATV or DTV. Check the antenna signal status.  
Check the source is set to AV  
No external video signal  
Picture lacks colour or is to dark  
All channels lose colour intermittently  
Poor reception, loss of colour  
Diagonal stripes on picture  
Ghost images appear  
Check colour, brightness and contrast settings  
Check the antenna in case it is broken, disconnected or damaged.  
Check channel is tuned correctly  
Receiver may be affected by interference. e.g. nearby radio broadcasting transmitter or from another TV receiver.  
Antenna direction may have been changed by a storm or strong wind. Ghost images are caused from both the signal travelling  
directly from the transmitter and a signal reflected from a hill or large building. Direction of the antenna should be chosen to avoid  
this situation.  
USB media files don’t work  
FAT 32 formatted flash drive required. Reformat if required.  
FAT 32 formatted flash drive required. Reformat if required.  
Time Shift and PVR don’t work  
FUSION Electronics New Zealand  
FUSION Electronics Australia  
FUSION Electronics Europe  
FUSION Electronics USA  
Ph: +64 9 369 2900  
Ph: +61 1300 736 012  
Ph: +44 845 299 7586  
Ph: +1 623 580 9000  

York Evaporator Blowers K3eu180 User Manual
Trion Cartridge Filters User Manual
Sharp Af R140dx User Manual
Samsung Aw189cb User Manual
Samsung Ad19a1 B1 E07 User Manual
Panasonic Cw C53hu User Manual
MIELE DADC 6000 User Manual
EPSON CO FH02 User Manual
DACOR MWDV27 02 User Manual
CRAFTSMAN 917.252532 User Manual