DACOR MWDV27 02 User Manual

Installation Instructions  
Warming Drawer  
Models:  
EWD24, EWD27, EWD30, EWD36,  
IWD24, IWD27, IWD30, MWDV27,  
MWDH27, MWDV30, MWDH30  
PWD27, PWD30  
Part No. 102345 Rev. C  
Table of Contents  
Before You Begin... ........................................................... 1 Installation Instructions.................................................... 7  
Important Safety Instructions .......................................... 1  
General Safety Precautions............................................. 2  
Installation Specifications................................................ 3  
Verifying the Package Contents....................................... 3  
Installation Planning......................................................... 3  
Install a Support Platform in the Cabinet......................... 6  
Electrical Power Supply Requirements............................ 6  
Remove the Drawer ........................................................ 7  
Installing the Chassis....................................................... 7  
Re-installing the Drawer................................................... 8  
Verifying the Warming Drawer Operation ........................ 8  
Installation Checklist ........................................................ 8  
Before You Begin...  
Important:  
If you have questions or problems with installation,  
contact your Dacor dealer or the Dacor Customer  
Service Team.  
Installer: In the interest of safety and to minimize  
problems, read these installation instructions  
completely and carefully before you begin the  
installation process. Leave these installation  
instructions with the customer.  
Dacor Customer Service team  
Phone:  
E-mail:  
(800) 793-0093.  
Customer: Keep these installation instructions for  
future reference and the local electrical inspector’s use.  
Web site:  
Important Safety Instructions  
Important Information About  
Safety Instructions  
The Important Safety Instructions and warnings in  
these instructions are not meant to cover all possible  
problems and conditions that can occur. Use common  
sense and caution when installing, maintaining or  
operating this or any other appliance.  
Always contact the Dacor Customer Service Team  
about problems and conditions that you don’t  
understand.  
Safety Symbols and Labels  
DANGER  
Immediate hazards that WILL result in severe personal  
injury or death.  
WARNING  
Hazards or unsafe practices that COULD result in severe  
personal injury or death.  
CAUtION  
Hazards or unsafe practices that COULD result in minor  
personal injury or property damage.  
1
Important Safety Instructions  
General Safety Precautions  
To reduce risk of fire, electric shock, serious injury or death when using your appliance, follow basic precautions, including  
the following:  
WARNING  
WARNING  
Exercise caution when opening the warming drawer.  
Let hot air or steam escape before looking or  
reaching into the warming drawer.  
Read this manual completely before using this  
appliance.  
Use this appliance only for its intended use as  
described in this manual. Use it only to warm food  
and heat plates and utensils. It is not designed for  
commercial, industrial or laboratory use.  
Use only dry pot holders when removing food and  
cookware from the warming drawer. Wet pot holders  
can cause steam burns.  
Do not put items like whole eggs, sealed containers  
or closed glass jars in the drawer. They may  
explode when heated, causing injury.  
Do not store or install this appliance outdoors,  
unless otherwise noted in these instructions. Do  
not use this product near water – for example, near  
sinks, swimming pools or in a wet basement.  
When the warming drawer is on in continuous  
mode (∞), it will remain on until turned off manually.  
Exercise caution when operating the unit in  
continuous mode.  
If you receive a damaged product, immediately  
contact your dealer or builder. Do not install or  
operate an appliance that has been damaged or  
dropped.  
Do not place more than 50 pounds in the warming  
drawer.  
Make sure that the appliance has been properly  
installed and grounded by a qualified installer  
according to the accompanying installation  
instructions. Have the installer show you the  
location of the electrical outlet so that you know  
where to disconnect power to the appliance.  
Properly clean and maintain the unit regularly as  
instructed in the use and care manual. Clean only  
those parts listed in this manual, in the manner  
specified. DO NOT USE ABRASIVE CLEANERS  
OR SCRUBBERS. THEY WILL PERMANENTLY  
DAMAGE THE FINISH.  
Do not repair or replace any part of the warming  
drawer unless specifically recommended in the  
literature accompanying it. All other service should  
be done by a qualified technician.  
Do not use abrasive or caustic cleaners or  
detergents on this appliance. They may permanently  
damage the finishes. Do not use aerosol cleaners,  
because they may be flammable or cause corrosion  
of metal parts.  
Before performing any type of service, make sure  
that the power plug is disconnected from the  
electrical outlet.  
Clean the warming drawer thoroughly before  
operating it for the first time.  
Keep the electrical cord away from heated surfaces.  
Make sure the warming drawer is used only by  
those individuals who are able to operate it properly.  
DO NOT TOUCH ANY OF THE SURFACES INSIDE  
OR OUTSIDE THE WARMING DRAWER DURING  
OR IMMEDIATELY AFTER USE. After use, make  
sure these surfaces have had sufficient time to cool  
before touching them. Heating elements may be  
hot, even though they are dark in color.  
Do not tamper with the controls.  
Preheat the warming drawer before use.  
Never allow anyone, including children to sit, stand  
or climb on any part of the appliance, including  
the drawer. Doing so may cause tipping, damage,  
serious injury or death.  
To avoid the possibility of fire or burns, do not allow  
clothing, potholders, towels or rags to come into  
contact with any part of the warming drawer during  
and immediately after use. Do not wear loose or  
hanging apparel while using the appliance.  
Do not leave children alone or unattended in the  
area around the appliance. Do not allow children to  
operate it, play with the controls, pull on the handle  
or touch other parts.  
To reduce the risk of fire in the warming drawer, do  
not overcook food. Do not leave it unattended with  
paper, plastic or other combustible materials inside.  
Do not store items of interest to children above  
the warming drawer. Children could be burned or  
injured while climbing on the appliance.  
If materials inside the warming drawer should ignite,  
keep the drawer closed and shut off the power at  
the circuit breaker panel or fuse box.  
2
Installation Specifications  
B
Verifying the Package Contents  
Use and Care manual  
Mounting screws  
Installation Planning  
A qualified technician must complete the installation of this  
built-in appliance. Proper installation is your responsibility.  
D
Chassis  
Carefully check the location where the drawer is to be  
installed. The drawer should be placed for convenient  
access. Make certain that electrical power can be provided  
in the selected location.  
Plan the installation so that all minimum clearances are  
met or exceeded. Dimensions shown provide minimum  
clearances, unless otherwise noted. Be certain that proper  
clearance is provided for the drawer door when it is in the  
open position.  
Drawer open  
E
The specified minimum cabinet depth and width must be  
provided. The cabinet depth and width must completely  
enclose the recessed portion of the drawer.  
Cabinet cutout dimensions must be used as indicated. All  
contact surfaces between the appliance and the cabinet  
must be solid and level. The drawer support platform must  
be flush with the bottom edge of the cabinet cutout.  
Overall Dimensions - IWD Series  
top View  
Make certain that you have everything necessary to ensure  
a proper installation before proceeding.  
40" (1016 mm)  
3 prong  
120 Vac power cord  
Mounting hole,  
9 places  
F
C
Chassis without  
drawer installed  
A
Drawer Face Dimensions  
Chassis Dimensions  
(IWD Series Shown)  
(IWD Series Shown)  
Dimension  
“C”  
Drawer Face  
Height  
Dimension  
Dimension  
“F”  
Chassis  
Height  
Warming  
Drawer  
Model No.  
Dimension “A”  
Drawer Face  
Width  
Dimension “B”  
Chassis Face  
Width  
“D”  
Chassis  
Depth  
Dimension “E”  
Drawer depth  
IWD24  
IWD27  
IWD30  
22 5/16” (567 mm) 22 1/8” (562 mm)  
25 5/16” (643 mm) 25 1/8” (638 mm)  
28 5/16” (719 mm) 28 1/8” (714 mm)  
8 15/16”  
(227 mm)  
23 3/8”  
(594 mm)  
23 13/16”  
(605 mm)  
9” (229 mm)  
See following page for other models  
3
Installation Specifications  
“A” Drawer Face  
Width  
“B” Chassis Face  
Width  
“C” Chassis Width  
Model  
EWD24  
EWD27  
MWDH27  
MWDV27  
PWD27  
EWD30  
MWDH30  
MWDV30  
PWD30  
EWD36  
24” (610 mm)  
23 5/8” (600 mm)  
22 1/8” (562 mm)  
27” (686 mm)  
26 5/8” (676mm)  
25 1/8” (638 mm)  
30” (762 mm)  
36” (914 mm)  
29 5/8” (752 mm)  
35 5/8” (905mm)  
28 1/8” (714 mm)  
34 1/8” (867 mm)  
Warming Drawer Overall Dimensions  
EWD  
PWD  
MWD  
3 7/16"  
(87 mm)  
2 1/4"  
(57 mm)  
3 1/4"  
(83 mm)  
10 1/8"  
(257 mm)  
1"  
(25mm)  
1"  
(25mm)  
1"  
(25mm)  
Handle Dimensions  
A
B
C
Drawer Face Dimensions  
(MW Series Shown)  
23 3/8"  
(594 mm)  
Chassis  
40" (1016 mm)  
3 prong  
Mounting  
Hole 9 Places  
120 Vac power cord  
9"  
1/2"  
(13 mm)  
(229 mm)  
5/64"  
(2mm)  
10"  
(254 mm)  
Chassis without  
drawer inserted  
Drawer open  
23 13/16  
(605 mm)  
1/2"  
(13 mm)  
Chassis Dimensions  
Overall Dimensions  
top View  
(EWD Series Shown)  
4
Installation Specifications  
3/4" Min.  
(19 mm)  
Warming Drawer  
Warming Drawer  
C
C
36" Typ.  
(914 mm)  
D
120 Vac  
electrical  
receptacle  
27"/30"/36"  
Dacor  
single oven  
5/8" Min.  
(16 mm)  
D
C
D
C
Warming Drawer  
Warming Drawer  
120 Vac  
Elect.  
A
B
120 Vac  
Elect.  
1 1/2" (38 mm)  
Typical counter top  
Cooktop  
3/4” Min.  
(19 mm)  
Toe Kick  
A
Warming Drawer  
5/8" Min.  
(16 mm)  
C
36" Typ.  
(914 mm)  
120 Vac  
electrical  
receptacle  
A
B
“B” Min.  
Width to  
Adjacent  
Doors/  
“D” Min.  
Vertical Gap  
Between  
“A” Cutout  
Width  
“C” Cutout  
Height  
Model  
Cutouts  
Drawers  
IWD24  
22 1/4”  
24 1/4”*  
(565 mm)  
(616 mm)  
EWD24  
EWD27  
IWD27  
25 1/4”  
(641 mm)  
27 1/4”*  
(692 mm)  
MWDH27  
MWDV27  
PWD27  
EWD30  
IWD30  
9 1/8”  
(232 mm)  
1 1/16”*  
(27 mm)  
28 1/4”  
(717 mm)  
30 1/4”*  
(768 mm)  
MWDH30  
MWDV30  
PWD30  
34 1/4”  
(870 mm)  
36 1/4”  
(921 mm)  
EWD36  
* On IWD series models, additional space may be required if an oversized drawer  
front is used. Use the drawer face dimensions for the corresponding EWD series  
model on page 4 for reference.  
Cutouts Dimensions  
Cutout Depth: 24” Min. (610 mm)  
5
Installation Specifications  
Install a Support Platform in the Electrical Power Supply  
Cabinet  
Requirements  
The warming drawer is supplied with a power cord  
terminated by a three-prong plug. Plug it directly into a  
dedicated, grounded, three prong, electrical outlet. Do  
not use an extension cord.  
Provide a platform (100 lb. load capacity) within the cabinet  
upon which the warming drawer will be supported. The  
platform must be installed level and straight. The top edge  
of the platform must be flush with the cutout at the front of  
the cabinet. There are no provisions to level the warming  
drawer after it has been installed. 3/4” (19 mm) thick  
plywood is recommended.  
Three-Prong  
Grounded Outlet  
Three-Prong Plug  
NOtE:  
If the drawer is not installed in a level fashion, the  
drawer may slide open on its own or may not seal  
tightly, allowing heat to escape and resulting in poor  
warming drawer performance.  
Chassis  
face  
The correct voltage, frequency and amperage must be  
supplied to the electrical outlet from a grounded, single  
phase circuit that is protected by a properly sized circuit  
breaker or time-delay fuse.  
Support  
platform  
The required voltage, frequency and amperage ratings  
are listed on the appliance data plate. The data plate  
is located inside the chassis drawer opening on the left  
side. Remove the drawer to expose it.  
Nominal Electrical Supply Requirements  
120 Vac, 60 Hz, 15 Amp. dedicated circuit  
The warming drawer is supplied with a 40” (1016 mm)  
power cord with a three prong grounded plug.  
total Connected Load 0.5 kW (4 Amp.)  
If the power supply requirements shown above do not  
agree with those listed on the product data plate, use  
the requirements on the product data plate.  
It is the owner’s responsibility to ensure that the  
electrical outlet is installed by a qualified electrician.  
The electrical installation must comply with the latest  
revision of the National Electric Code ANSI/NFPA 70  
and local codes and ordinances.  
If the electrical service provided does not meet the  
product specification, or does not conform to the NEC  
or local standards, do not proceed with the installation.  
Call a licensed electrician to correct the electrical  
service before proceeding.  
Be certain to locate the electrical outlet in an  
accessible location, so that the warming drawer may  
be easily unplugged in the event that service becomes  
necessary.  
6
Installation Instructions  
WARNING  
Installing the Chassis  
1. Grasp the warming drawer chassis on opposite  
sides and slide it partially into the cabinet opening.  
Temporarily support the chassis in place so that it will  
not tilt or fall.  
To avoid personal injury caused by the appliance  
falling forward when the drawer is opened, secure  
the chassis to the cabinet and support platform as  
instructed.  
Be certain that the power plug is disconnected from  
the electrical outlet before installation.  
2. From an adjoining cabinet, reach in behind the drawer  
and pull the power cord until the plug is next to the  
electrical outlet. Do not plug in the power cord at this  
time.  
Verify that the electrical supply matches the ratings  
found on the appliance data plate and the installation  
specifications before proceeding.  
3. After positioning the power cord and plug, slide the  
chassis completely into the cabinet until the front frame  
is positioned flush against the cabinet face.  
Remove the Drawer  
Remove the drawer from the appliance to allow access  
to the mounting holes during installation, and to  
reduce weight:  
4. Use the screws provided to secure the warming drawer  
chassis to the cabinet and support platform, insert them  
into the mounting holes and tighten into place. You may  
want to drill pilot holes prior to installing the mounting  
screws.  
1. Pull the drawer out to the fully open position.  
2. Push in on the locking tab on one side as you pull the  
drawer up.  
Mounting Hole,  
9 Places  
3. When the drawer comes loose from the slide, repeat  
the same process on the opposite side.  
4. Grip the drawer on both sides and pull it free.  
5. For safety, push both drawer slides into the drawer  
opening.  
StEP 2: Push  
locking tab  
Continued...  
StEP 3: Pull up on  
front of drawer  
7
Installation Instructions  
Verifying the Warming Drawer  
Operation  
Re-installing the Drawer  
1. Pull the drawer slides all the way out of the drawer  
opening.  
1. Connect power plug to the electrical outlet.  
2. Gently lower the drawer between the extended slides  
until it is suspended by them.  
2. Operate the warming drawer as outlined in the use and  
care manual that accompanied this product.  
3. Slide the back of the drawer mounting brackets under  
the drawer mounting clips on the slides.  
Installation Checklist  
4. Push one side of the drawer down onto its locking tab,  
until the tab locks into place.  
WARNING  
5. Repeat the same process on the opposite side.  
To ensure a safe and proper installation, the  
following checklist should be completed by the  
installer to ensure that no part of the installation has  
been overlooked.  
6. Gently open and close the drawer to make sure that it  
is properly installed.  
StEP 3: Slide mounting  
bracket under clip on slide  
Proper installation is the responsibility of the  
homeowner. The importance of proper installation of  
your warming drawer cannot be overemphasized.  
Has the mounting platform been installed according to  
the instructions on page 6?  
Has the a properly grounded, dedicated, three prong  
electrical outlet been installed for the appliance by a  
licensed electrician? See page 6.  
Clip on slide  
Slide  
Has the chassis been properly fastened to the  
mounting platform and sides of the cabinet?  
See page 7.  
Has the drawer been properly installed?  
Has proper operation been verified?  
Have any problems been noted on the warranty card  
or during the on-line warranty activation? Has the  
warranty been activated on-line or the warranty card  
filled out completely and mailed?  
StEP 4: Push front of  
drawer down until tabs lock  
into place  
8
Dacor 1440 Bridge Gate Drive, Diamond Bar, CA 91765 Tel: (800) 793-0093 FAX: (626) 403-3130 www.Dacor.com  

Whirlpool Roper X18004d00 User Manual
Trane Uh Prc001 En User Manual
Sterling Power Products 1240ce User Manual
Soleus Air Air Conditioner Gm Ttw 12esez User Manual
Samsung Aw0610a User Manual
Philips Scd361 User Manual
Niles Audio Personal Emergency Reporting System Pers 2400b User Manual
KENWOOD M 720DAB User Manual
HIBOOST 4K SMART LINK 03 User Manual
ASUS ZENFONE 3 LASER ZC551KL User Manual