LED Indicators
LifeBook Security/
Tablet PC Buttons
Please refer to Table 1
The five security/Tablet PC
buttons are located on the
bottom right-hand side of the
display when it is configured
to be used as a notebook.
LEFT PANEL
Getting started with your new Fujitsu
Button Icon and Name
(Primary)
LifeBook® T1010 Tablet PC
Microphone Jack
Air Vents
PC Card Slot
This convenient guide will lead you through the start-up process in eight easy steps and will also offer some valuable tips.
USB 2.0 PC Card Slot Eject Button
Port
Display Latch
Pen Garage
Power
Optional Webcam
Pen Tether
Attachment
Point
DC Power Jack
Security functions: All five
buttons are used when implementing
security functions. Four of the
buttons are used to enter the
password, and the fifth is used
as an Enter button.
Scroll Sensor
(for Tablet Mode)
External Power
Display Panel
Headphone Jack
Memory Stick/
SD Card Slot Smart Card Slot
Optical/Hard
Drive Access
LifeBook Security/Tablet PC
Buttons
Tablet PC functions: The Tablet
PC buttons have a number of
functions, depending upon the
state of the system: pre-logon
state or post-logon state.
Built-in Microphone
RIGHT PANEL
Touchpad Cursor Control
Power Suspend/Resume
Switch
Battery 1 Charging
Battery 1 Level
Battery 2 Charging
Battery 2 Level
NumLk
Left Button
The system is pre-logon when the
Windows logon screen is displayed;
the system is post-logon when the
Windows desktop is displayed.
All five of the buttons have primary
functions. Several of the buttons
also have secondary functions
(see chart) when used as
Right Button
Status Indicator Panel
Scroll Strip
Keyboard
Status Indicator Panel
Wireless Device On/Off Switch
Anti-Theft Lock Slot Optical Drive
application buttons and are
activated by pressing the Function
(Fn) button while pressing the
application button. In post logon,
the secondary functions of the
Application A and B buttons
can be changed to launch any
application. See User’s Guide for
more information about using the
Security/Application Buttons.
1. What’s in the Box
4. Installing Click Me!
Check to see that all of the following are in the box:
• Check to be sure the wireless device switch is on.
For Genuine Microsoft® Windows® XP Tablet PC: The first time
m
m
m
m
m
LifeBook T Series Tablet PC
AC adapter and power cable
Lithium ion battery (pre-installed)
Drivers and Application CD
Warranty Terms & Conditions Booklet
m
m
m
m
m
Microsoft associated discs
Pen tether
Restore disc
Microfiber Cleaning Cloth
Third party application discs
BACK PANEL
you boot up your system, you will see an icon called Click Me!
in the Start menu.
For Genuine Windows Vista®: In addition to an icon on the
desktop, a dialog box will automatically open that prompts
you to run Click Me!. Please proceed with ClickMe! to
complete the system initial installation.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
CLICK ME
2. Turn on Your Tablet PC
• Plug the AC adapter into your Tablet PC.
• Plug the power cord into the AC adapter.
CapsLk
Anti-Theft Lock Slot
Modem (RJ-11) Jack
USB 2.0 Port
Drivers
• Connect the power cord to an electrical outlet.
• Connect phone cord or Ethernet cable to your
Tablet PC and to a wall jack.
• Press the Suspend/Resume switch to turn on the Tablet PC.
• The Tablet PC is now on and the battery is being charged.
• The Tablet PC will begin a power-on self test.
• Once the self test is successfully completed, the operating
system will begin the initialization process.
Air Vents
ScrLk
Look for the latest drivers on
the Drivers and Applications
CD. Right-click the FDU icon
and select “update”, or go to
us.fujitsu.com/computers.
5. Register Your Tablet PC
Register your Tablet PC with Fujitsu Service and Support
via our website (us.fujitsu.com/computers).
USB 2.0 Port
Security
External Video Port
Gigabit LAN (RJ-45) Jack
3. Register
Security Panel Button Functions
(System State—pre-boot or resuming from suspend)
For Genuine Microsoft® Windows® XP Tablet PC: After the operating
system has initialized, accept the Microsoft® Windows® Licensing
Agreement and the Fujitsu End User License Agreement to proceed.
Then enter the information as prompted to personalize your notebook
and configure your modem* to dial.
6. Convert from Notebook
7. Installing Additional
Top Latch
B Display Side
Security
Button 1
Security
Button 2
Security
Button 3
Security
Button 4
Security
Enter
Button
to Tablet
Software
• Lift the display until it is perpendicular to
the keyboard.
• Load the Drivers and Applications disc to check
for the latest versions of pre-installed drivers and
applications. Install additional applications not
pre-installed on your system, such as CyberLink
Power Director and Make Disc (on select models).
Pre-logon Tablet PC Button Functions
(System State – pre-logon (Windows logon screen is displayed)
• Carefully rotate the display clockwise or counter
clockwise until it is facing backwards.
• Holding the top edge of the display panel, push
it down until it is nearly on top of the keyboard.
• Push the display latch down (the latch will pivot
clockwise). The top latch disappears, and the
bottom latch appears (A).
For Genuine Windows Vista®: Accept the Microsoft® Windows®
Licensing Agreement and the Fujitsu End User License Agreement
to proceed. Select your User ID and Password during the “Welcome
Screen.” Keep a record of your User ID and password stored in a
secure place. THE SCREEN WILL GO DARK FOR APPROXIMATELY
TWO MINUTES. Do not attempt to turn power on or off
during this stage.
Notebook
Function
<Tab>
<Enter>
Rotate
Screen
Used to
invoke
Ctl+Alt+Del
Button
Bottom Latch
A Display Side
secondary
function
Secondary
Functions
(Fn+ Button)
<Shift>
<Tab>
<Escape>
None
None
None
8. Additional instructions
for WWAN (Wireless
Wide Area Network)
Post-logon Tablet PC Button Functions
(System State – pre-logon (Windows logon screen is displayed)
If you have:
You will need to install
the following software:
• Holding the latch down, gently push down on
the display until the latch engages.
Primary
Notebook
Function
Page
Down
Page
up
Rotate
Screen
Secondary
function
Ctl+Alt+ Del
Button
Dual-Layer
Multi-Format
DVD Writer
CyberLink
Power Director
and Make Disc
model
• To return to a notebook configuration, press the
latch release button, and raise the screen until
it is perpendicular to the keyboard. Be sure to
turn the display in the direction indicated by the
display rotation light and push the display latch
so it faces forward (B).
Selection
• If your system comes with a built-in Mobile
Broadband module, please follow the
installation and activation instructions,
which are included in a separate package
with your LifeBook Tablet PC.
Secondary
Functions
User-
defined
User-
Defined
Application
B (Default =
MS Journal)
Display
Fujitsu
Menu
Utility
None
Switching:
1. LED only
2. CRT only
3. Dual
(Fn+ Button) Application
A (Default =
Calculator)
Display
Table 1
* Wireless WAN model does not come with modem.
|