FUJITSU LIFEBOOK P728 User Manual

System  
Operating Manual  
FUJITSU LIFEBOOK P728  
Copyright and Trademark Information  
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness  
of this document; however, as ongoing development efforts are continually improving the  
capabilities of our products, we cannot guarantee the accuracy of the contents of this  
document. We disclaim liability for errors, omissions, or future changes.  
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited  
or its subsidiaries in the United States and other countries.  
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or  
its subsidiaries in the United States and other countries.  
Microsoft and Windows are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries.  
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.  
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI  
Logo are either a registered trademarks or trademarks of HDMI Licensing, LLC  
in the United States and/or other countries.  
Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of  
Adobe Systems Incorporated in the United States and/or other countries.  
USB Type-C is a trademark or registered trademark of the USB Implementers  
Forum in the USA and other countries.  
USB Type-C is a trademark or registered trademark of the USB Implementers  
Forum in Canada and other countries.  
All other trademarks specified here are the property of their respective owners.  
Contents  
Contents  
Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Traveling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Transporting the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Storing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Further information on cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Choose a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Switching on the device for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Installing Bonus Apps (Windows 10 Pro and Home configurations) . . . . . . . . . . . . . . . . . . . . . . 23  
Installing Bonus Apps (Windows 10 S configurations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Opening the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Switching the notebook on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Programming the ON/OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Different ways to use your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
From notebook to Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Select display orientation (portrait or landscape format) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
From Tablet PC to notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Switching off the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Closing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using the device as a Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using your fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Using the device as a notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Hot keys and function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
F Lock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Virtual number keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Fujitsu  
3
Contents  
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Using the energy saving functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Speaker and microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Optional wireless LAN / Bluetooth wireless components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Configuring WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Further information on WLAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Your USB Type-C dock (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Ports on the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Setting up the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Connecting the AC adapter to the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Connecting the notebook to the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Switching on the notebook via the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Switching off notebook via dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Disconnecting the notebook from the dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Brief overview of the security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Configuring the fingerprint sensor (configuration dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Configuring the palm vein sensor (configuration dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Configuring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Protecting BIOS Setup Utility (supervisor password and user password) . . . . . . . . . . . . . . . . . 66  
Password protection for booting the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Smart Card reader (configuration-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Inserting the Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Trusted Platform Module - TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
USB port with charging function (USB Type-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
USB port with charging function (Anytime USB charge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Headphones/microphone/Line-In/Line-Out/ headset-combi port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Remove the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Removing and installing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Removing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
4
Fujitsu  
Contents  
Installing and removing an M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Removing the M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Installing the M.2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85  
Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
BIOS Setup Utility operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88  
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 88  
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . 88  
Load Setup Defaults – load default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88  
Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . 88  
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 88  
Save changes and power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88  
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89  
Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89  
In the event you need to recover your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89  
The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Battery indicator does not illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
When certain characters are entered on the keyboard, only numerals are written . . . . . . . . . . . . . 90  
The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
The LCD screen of the notebook is difficult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91  
The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91  
The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91  
The cursor does not correctly follow the stylus movements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92  
Stylus input not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92  
The notebook does not start after switching it on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92  
The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
The wireless connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
The battery discharges too quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Smart Card reader is not recognized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Smart Card PIN forgotten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Smart Card lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
User and/or supervisor SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Acoustic warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
WLAN specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99  
USB Type-C dock (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100  
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
AC adapter for use with notebook and USB Type-C dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Recycling your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
DOC (Industry CANADA) Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
UL Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104  
Fujitsu  
5
Contents  
FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
Regulatory Notes and Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
Wireless LAN, Health and Authorization for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
Regulatory Information/Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106  
Federal Communications Commission statement: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106  
FCC Interference Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106  
FCC Radio Frequency Exposure statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107  
Export restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107  
Restrictions concernant l’exportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107  
Canada, Industry Canada (IC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108  
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108  
Avis pour le Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Wireless LAN Devices Covered by this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109  
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112  
Configuring the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112  
Configuring the WLAN Using Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113  
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113  
Troubleshooting the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114  
Using the Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115  
Image Backup and Recovery Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
Windows 10 Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
Creating a recovery drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
Recovery options in Windows 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
Downloading driver updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121  
6
Fujitsu  
Declarations of conformity  
Declarations of conformity  
DECLARATION OF CONFORMITY  
according to FCC Part 15  
Responsible Party Name: Fujitsu America, Inc.  
Address:  
1250 E. Arques Avenue  
Sunnyvale, CA 94085  
(408) 746-6000  
Telephone:  
Declares that product:  
Base Model Configuration: LIFEBOOK P728 Notebook  
Complies with Part 15 of the FCC Rules.  
This device complies with Part 15 of the FCC rules. Operations are subject to the  
following two conditions: (1) This device may not cause harmful interference. (2) This  
device must accept any interference received, including interference that may cause  
undesired operation.  
This device is compliant with SAR or general population / uncontrolled exposure  
limits of FCC rules and KDB procedures tested in accordance with IEEE1528:2013  
standards. This device has been tested and meets the FCC IC RF exposure guidelines  
when tested with the device operation conditions.  
Fujitsu  
7
 
Declarations of conformity  
1
1
= Declaration of conformity  
8
Fujitsu  
Fujitsu Contact Information  
Fujitsu Contact Information  
Service and Support  
You can contact Fujitsu Service and Support in the following ways:  
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)  
Before you place the call, have the following information ready so that the customer  
support representative can provide you with the fastest possible solution:  
Product name  
Product configuration number  
Product serial number  
Purchase date  
Conditions under which the problem occurred  
Any error messages that have occurred  
Type of device connected, if any  
Fujitsu Shopping Online  
Maintaining Latest Configuration  
To ensure that you always have the most current driver updates related to your system, you should  
occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is  
available from the Fujitsu Support site. FSDM will allow you to view a list of the most current  
drivers, utilities and applications to determine whether you have the latest versions. If you have  
a Windows 10 operating system, you will need to go to the Support Site to download the FSDM  
Limited Warranty  
Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the  
Limited Warranty Terms and Conditions Booklet that came with your notebook.  
Fujitsu  
9
 
Fujitsu Contact Information  
Notational conventions  
Pay particular attention to text marked with this symbol. Failure to observe  
this warning will endanger your life, will damage the device or lead to loss  
of data. The warranty will be invalidated if the device becomes defective  
through failure to observe these warnings.  
Indicates important information which is required to use the device properly.  
indicates an activity that must be performed  
indicates a result  
This style  
indicates data entered using the keyboard in a program dialogue or at  
the command line, e.g. your password (Name123) or a command used to  
start a program (start.exe)  
This style  
indicates information that is displayed on the screen by a program, e.g.:  
Installation is complete.  
This style  
indicates  
terms and texts used in a software interface, e.g.: Click on Save.  
names of programs or files, e.g. Windows or setup.exe.  
"This style"  
indicates  
Cross-references to another section, e.g. "Safety information"  
cross-references to an external source, e.g. a web address: For more  
names of CDs, DVDs and titles or designations of other materials, e.g.:  
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual  
Key  
F10  
indicates a key on the keyboard, e.g:  
This style  
indicates terms and text that are emphasized or highlighted, e.g.: Do not  
switch off the device  
10  
Fujitsu  
 
Ports and controls  
Ports and controls  
This chapter presents the individual hardware components of your device. It gives an  
overview of the indicators and connections of the device. Please familiarize yourself  
with these items before you start to work with the device.  
Notebook open  
1
2
3
1
9
4
5
4
8
5
7
6
1
2
3
4
5
= Microphone  
= Webcam  
6
= Fingerprint sensor or palm sensor  
(configuration dependent)  
7
8
9
= Touchpad buttons  
= Touchpad  
= Webcam LED  
= Speaker  
= Ambient light sensor  
= Status indicators  
Fujitsu  
11  
 
Ports and controls  
Left side  
1
2
3
4
5
1
2
3
= DC input connector (DC IN)  
= LAN port  
= USB 3.1 port with charging function  
(USB Type-C™  
4
5
= USB 3.0 port with charging function  
(Anytime USB charge)  
= SmartCard reader  
)
Right side  
4
1 2  
3
5
6
7
8
9
10  
1
2
3
4
5
= Slot for stylus  
6
7
8
9
= Memory card slot  
= USB port 3.0  
= HDMI port  
= Fastening eyelet for optional stylus tether  
= ON/OFF switch  
= Power-on indicator  
= External monitor port (VGA)  
= Combined headphones/microphone port  
10 = Security Lock device  
12  
Fujitsu  
Ports and controls  
Bottom  
1
2
2
3
4
1
2
3
= Battery compartment  
4
= Memory upgrade compartment and  
M.2 module  
= Battery lock slider switch  
= Battery replacement status indicator  
Fujitsu  
13  
Important notes  
Important notes  
INoteosrtantnotes  
m
p
This chapter contains essential safety information which must be followed  
when working with your notebook. Other notes also provide useful information  
which will help you with your notebook.  
14  
Fujitsu  
     
Important notes  
Safety instructions  
SIn  
a
fofermtyaintif  
o
onrmation  
,
Please observe the following safety information.  
Please pay special attention to the sections in the manual marked  
with the symbol on the left.  
When connecting and disconnecting cables, observe the relevant  
notes in this operating manual.  
Read the information on the ambient conditions in the "Technical data", Page 97  
chapter and the "First-time setup of your device", Page 20 chapter before preparing  
your notebook for use and switching it on for the first time.  
When cleaning the device, please observe the relevant notes in the  
Pay attention to the additional safety notes for devices with radio components  
provided in the "Safety/Regulations" manual.  
Please refer to the notes in the chapter "Removing and installing  
When handling this device, you will come into contact with lead, a chemical which in  
California is held to be a possible cause of birth defects and other damage to fertility.  
Wash your hands after using the device.  
Avoid placing your computer on uneven or unstable work surface.  
Do not place objects or apply heavy pressure on your computer.  
Do not apply too much force to the display corners.  
Do not rotate display with excessive force.  
Do not pick up or hold the computer by display only.  
Do not shake or bump the display.  
Avoid excessive vibration and shocks.  
Avoid excess force when tapping or writing on the screen.  
Do not block the air vents.  
Do not leave the computer turned on when enclosed in briefcase or backpack.  
In the event you drop your notebook or damage the the housing in any way,  
immediately turn off power and disconnect the power plug. Failure to do so  
could result in a short circuit, smoke, and/of fire. Contact Fujitsu Service and  
Support to learn how to get the computer repaired.  
This notebook complies with the relevant safety regulations for data processing equipment.  
If you have any questions about setting up your notebook in the intended environment,  
please contact your sales outlet or our Hotline/Service Desk.  
Fujitsu  
15  
     
Important notes  
Additional safety notes for devices with  
radio components  
RWBlauir  
d
eitloeo  
c
soosthmL,ApSNo  
a
n
fe  
e
t
nytnotes  
s
If a radio component (Wireless LAN, Bluetooth) is incorporated in your notebook, you must  
be sure to observe the following safety notes when using your notebook:  
Switch off the radio components when you are in an aircraft or driving in a car.  
Switch off the radio components when you are in a hospital, an operating room or near a medical  
electronics system. The transmitted radio waves can impair the operation of medical devices.  
Switch off the radio components, when you let the device get near flammable gases  
or into hazardous environments (e.g. gas station, paintshops), as the transmitted  
radio waves can cause an explosion or a fire.  
For further information on how to switch the radio components on and off, refer  
Energy saving  
NEPnoewtergs saving  
e
ry  
Switch the notebook off when it is not in use. Switch off any connected external devices when  
they are not in use. If you use the energy saving functions, the notebook uses less power. You  
will then be able to work for longer before having to recharge the battery.  
The energy efficiency is increased and environmental pollution is reduced.  
You save money and help protect the environment.  
Energy saving under Windows  
Make use of the available energy saving functions as described in chapter  
16  
Fujitsu  
             
Important notes  
Traveling with your notebook  
MTN  
r
o
oa  
t
bneissble oprkteration  
p
o
o
Please observe the points listed below when traveling with your notebook.  
Before you travel  
Back up important data stored on your hard disk.  
NTr  
o
a
t
v
e
e
b
l
o
in  
o
g
k
,
notebook  
Switch off the radio component for data security reasons. With data traffic via a wireless  
connection, it is also possible for unauthorized third parties to receive data.  
Information on activating data encryption is provided in the documentation  
for your radio component.  
If you wish to use your notebook during a flight, check with the flight attendants if its use is safe.  
When traveling in other countries  
If you are traveling abroad, check that the AC adapter can be operated with the local AC  
voltage. If this is not the case, obtain the appropriate AC adapter for your notebook.  
Do not use any other converter!  
Check whether the local AC voltage and the AC cable are compatible. If this is not  
the case, buy an AC cable that suits the local conditions.  
Enquire with the corresponding government office of the country you will be traveling to,  
whether you may use your notebook with its integrated radio component there.  
Take the necessary travel adapters with you when traveling abroad. Check the following  
table to see which travel adapters you will need, or ask your travel organizer.  
Power connection  
Travel destination  
United States, Canada, Mexico, parts of Latin  
America, Japan, Korea, Philippines, Taiwan  
Russia and the Commonwealth of Independent  
States (CIS), much of Europe, parts of Latin  
America, the Middle East, parts of Africa, Hong  
Kong, India, much of south-east Asia  
United Kingdom, Ireland, Malaya, Singapore,  
parts of Africa  
China, Australia, New Zealand  
Fujitsu  
17  
           
Important notes  
Transporting the notebook  
Protect the notebook against severe shocks and extreme temperatures  
(e.g. direct sunlight in a car).  
Do not transport the notebook while it is switched on.  
Carry your notebook with you while traveling. Do not check it in as baggage.  
Never put your notebook through a metal detector. Have it hand-inspected by  
security personnel. You can, however, put your notebook through a correctly set  
X-ray machine. To avoid problems, place the notebook as close as possible  
to the entrance of the machine and remove it as soon as possible or have it  
hand-inspected by security personnel. Security officials may require you to switch  
your notebook on. So make sure you have a charged battery on hand for this.  
Switch the notebook off.  
Unplug the AC plug of the AC adapter and all external devices from the power outlets.  
Disconnect the AC adapter cable and the data cables for all external devices.  
To protect against damaging jolts and bumps, use a notebook carrying  
case to transport your notebook.  
Storing the notebook  
If storing your notebook for a month or longer, turn it off, fully charge the battery, then  
remove and store all the Lithium Polymer batteries in a suitable location.  
Store your notebook in a cool dry location. Temperatures should remain  
between 13 ºF / -25 ºC and 140 ºF / 60 ºC.  
Store your notebook and batteries separately. If you store your notebook with a  
battery installed, the battery will discharge, and battery life will be reduced. In  
addition, a faulty battery might damage your notebook.  
Always power off the notebook before transporting and/or packaging it.  
After shutting down the notebook, wait until the status LED panel indicates  
the power-off condition (i.e., no lights are illuminated).  
It is possible that the notebook may not automatically go to power-off or sleep mode  
when you close the lid. This situation may occur due to pre-operating system boot  
password security settings or some other application running on the notebook.  
Attempting to transport the notebook while power is on may damage  
the notebook due to shock or overheating.  
18  
Fujitsu  
   
Important notes  
Cleaning the notebook  
Use of incorrect cleaners can result in optical impairment of the LCD and / or  
damage to the notebook. Always refer to the cleaner manufacturer’s guidelines and  
material safety data sheets for proper handling and use of the products.  
Never use ammonia, acidic, or alkaline cleaners or organic chemicals  
such as paint thinner, acetone or kerosene. It may damage surface  
finishes and the coating of the LCD screen.  
Never use compressed air for cleaning the notebook.  
If your notebook has a Smart Card slot, be very careful to avoid any liquid  
entering the slot as this can damage the notebook.  
Further information on cleaning the notebook  
The notebook does not float.  
If the notebook is exposed to water or other liquids with its connections open, liquid  
can penetrate the notebook and cause a malfunction. Do not continue to use the  
notebook. Switch it off and contact our hotline / our service desk (see enclosed list of  
service desks or visit our website at: "http://www.fujitsu.com/us/support/").  
Fujitsu  
19  
   
First-time setup of your device  
First-time setup of your device  
FGierstti-  
n
ti  
g
m
s
e
tasretetup  
d
Please read the chapter "Important notes", Page 14.  
If your device is equipped with a Windows operating system, the necessary  
hardware drivers and supplied software are already pre-installed.  
Before switching it on for the first time, connect the device to the AC voltage using  
the AC adapter, see "Connecting the AC adapter", Page 21. The AC adapter must  
remain connected during the whole of the installation process.  
A system test is performed when your device is first switched on. Various messages  
can appear. The display may remain dark for a short time or may flicker.  
Please follow the instructions on the screen.  
NEVER switch off your device during the first-time setup process.  
When the device is delivered, the battery is located in the battery compartment. The battery  
must be charged if you want to operate your device using the battery.  
When used on the move, the built-in battery provides the device with the necessary power. You  
can increase the operating time by using the available energy saving functions.  
For instructions on how to connect external devices (e.g. mouse, printer) to your  
device, please refer to the operating manual for your device.  
Unpacking and checking the device  
If you find that damage has occurred during transport, please notify  
your local sales outlet immediately!  
Unpack all the individual parts.  
PTra  
a
c
n
k
s
a
p
g
oinrt  
g
Check your device for any visible damage which may have occurred during transportation.  
You may need to reuse the packaging in the future, for example if  
you need to ship your device.  
20  
Fujitsu  
           
First-time setup of your device  
Choose a location  
CSAeChto  
a
u
o
d
p
s
a
e
ptelorcation  
a
Choose a suitable location for the device before setting it up. In doing  
so, please follow these instructions:  
Never place the device or the AC adapter on a heat-sensitive surface.  
The surface could be damaged as a result.  
Never place the device on a soft surface (e.g. carpeting, upholstered furniture,  
bed). This can block the air vents and cause overheating and damage.  
The underside of the device heats up during normal operation. Prolonged contact  
with the skin can become unpleasant or even result in burns.  
Place the device on a stable, flat, non-slippery surface. Please note that the  
rubber feet of the device may mark certain types of delicate surfaces.  
Keep other objects at least 100 mm / 3.94 inches away from the device  
and its AC adapter to ensure adequate ventilation.  
Never cover the ventilation openings of the device.  
Do not expose the device to extreme environmental conditions.  
Protect the device against dust, humidity and heat.  
Connecting the AC adapter  
MACaka  
i
d
n
a
gpreteadytouse  
r
Observe the safety notes in the enclosed "Safety/Regulations" manual.  
The supplied AC cable conforms to the requirements of the country in which  
you purchased your device. Make sure that the AC cable is approved for  
use in the country in which you intend to use it.  
Connect the AC cable (1) to the AC adapter.  
Plug the AC cable (2) into a power outlet.  
Connect the AC adapter cable (3) to the  
DC jack (DC IN) of the device.  
3
2
1
Fujitsu  
21  
           
First-time setup of your device  
Switching on the device for the first time  
Switchingonforthefirsttime  
To make it easier to use your device for the first time, the operating system  
is pre-installed on the hard disk.  
1
Slide the ON/OFF switch (1) to the right to switch on the notebook.  
The ON/OFF switch returns automatically to its original position.  
During the installation process, follow the on-screen instructions.  
You can find information and help on the Windows operating system functions  
on the Internet at "http://windows.microsoft.com".  
22  
Fujitsu  
   
First-time setup of your device  
Installing Bonus Apps (Windows 10 Pro and  
Home configurations)  
BonusApps  
Certain applications need to be activated before using your device.  
In order to activate these applications, click on the Start menu.  
Click on Settings.  
Select Extras.  
Click and open each of these applications.  
Repeat these steps for each user account.  
Note that in some cases (depending upon which application was selected for  
installation) after installation completes, the system will prompt you to reboot.  
There are also cases in which if multiple applications are selected to install  
but one of them needs a reboot, the system will reboot and continue  
installing the rest of the selected applications.  
Installing Bonus Apps (Windows 10 S configurations)  
The following applications need to be activated before using your device.  
Battery Change Utility  
Battery Utility  
FUJ02E3 Device Utility  
LIFEBOOK Application Panel  
Mic Mute Utility  
Pen Low Battery Notification  
Pointing Device Utility for P728  
In order to activate these applications, click on the Start menu.  
Click on Settings.  
Select Extras.  
Restart the system to see those application in the Start menu.  
Fujitsu  
23  
     
Working with the notebook  
Working with the notebook  
ONopterbatiokn,notebook  
e
o
This chapter describes the basics for operating your notebook. Please refer to  
"Connecting external devices", Page 70 for instructions on how to connect external  
devices such as a mouse and a printer to the notebook.  
Please refer to the notes in the chapter "Important notes", Page 14.  
Status indicators  
Statusindicators  
The status indicators provide information about the status of the power supply,  
the hard disks and the keyboard functions.  
F
24  
Fujitsu  
         
Working with the notebook  
Display  
Description  
Power-on indicator/Standby  
SPto  
a
w
n
e
drb-yoin  
n
idnidcactaotror  
i
The indicator is illuminated: The notebook is switched on.  
The indicator flashes: The notebook is in sleep mode (Save-to-RAM).  
The indicator is not lit up: The notebook is switched off or the notebook is  
in Save-to-Disk mode.  
Battery charging indicator/AC connection  
The charging state of the battery is shown by the rechargeable battery indicator.  
With AC adapter connected:  
The indicator lights up white: The rechargeable battery is charged or no  
rechargeable battery is inserted.  
The indicator light is orange: The AC adapter is connected and the battery  
is being charged.  
The indicator is flashing orange: The AC adapter is connected but the battery  
cannot be charged as the battery is too hot or too cold for charging. The  
charging process is continued as soon as the rechargeable battery has reached  
a permissible temperature again.  
The indicator is flashing red: A fault has occurred.  
The indicator is not lit up: The battery is not being charged (the battery is  
already more than 90% charged or the AC adapter is not connected).  
Batterysinytdaitcuasotinol rdicator  
m
b
Battery indicator  
The indicator lights up white: The rechargeable battery is charged to between  
51% and 100 % of its maximum capacity.  
The indicator light is orange: The rechargeable battery is charged to between  
13 % and 50 % of its maximum capacity.  
The indicator lights up red: The rechargeable battery is charged to between  
0 % and 12 % of its maximum capacity.  
The indicator is flashing orange: The battery charging level is being checked  
(for four seconds after battery installation).  
The indicator is flashing red: A fault has occurred.  
The indicator is not lit up: There is no battery installed.  
Drive indicator  
DIn  
r
divicator  
e
The indicator is illuminated: The hard disk drive is being accessed.  
Wireless indicator  
The indicator is illuminated: The wireless components are switched on.  
Indicator is off: The wireless components are switched off.  
F Lock indicator  
IF  
n
L
d
o
ic  
ator  
c
k
F
F
Fn  
The indicator is illuminated: The key combination  
The special functions of the Fn keys (see chapter "Key combinations", Page 45) can  
Fn  
+
has been pressed.  
be executed by pressing the keys directly without also having to press the  
key.  
Fujitsu  
25  
               
Working with the notebook  
Display  
Description  
Num Lock indicator  
IN  
n
u
d
m
icaLtocrk  
o
Num  
The indicator is illuminated: The  
key has been pressed. The virtual number  
keys have been switched on. You can output the characters indicated on the upper  
right of the keys.  
Caps Lock indicator  
IC  
n
a
d
p
icsLtorck  
a
The indicator is illuminated: The Caps Lock key has been pressed. All the  
characters you type will appear in upper case. In the case of overlay keys, the  
character printed on the upper left of the key will appear when that key is pressed.  
Scroll Lock indicator  
IS  
n
c
d
r
i
oclalLtoock  
r
Fn  
Rol  
has been pressed.  
The indicator is illuminated: The key combination  
+
The effect that this key has varies between applications.  
Battery replacement indicator  
If the battery is unlocked for battery replacement, the battery replacement indicator  
will show whether the device is ready for battery replacement (see "Removing a  
battery", Page 50). You can replace the device’s battery without having to switch  
the device off first. The device has a built-in bridge battery for this purpose. If  
the battery is unlocked while the device is in operating mode, Sleep Mode will  
automatically be activated.  
The indicator light is green: The device is ready for battery replacement.  
Replace the battery.  
The indicator is flashing orange: The device is ready for battery replacement  
but the battery charging level of the bridge battery is low.  
Replace the battery quickly.  
Caution: If the battery replacement takes too long, the device may switch itself  
off. Any data not saved may be lost.  
The indicator light is orange: The device is not yet ready for battery replacement  
as Sleep Mode has not yet been activated.  
Wait until the indicator lights up green.  
There is a possibility of not shifting to sleep mode even if the battery lock is  
released when the system is at high load.  
Caution: If the battery is replaced now, the device may switch itself off. Any  
data not saved may be lost.  
The indicator lights up red: The device is not ready for battery replacement.  
Lock the battery again. Connect the device to the AC adapter to charge the  
bridge battery.  
After a short charging time, the battery replacement can be attempted again.  
Caution: If the battery is replaced now, the device may switch itself off. Any  
data not saved may be lost.  
The indicator is flashing red: Error in the bridge battery.  
Shut down the device.  
Connect the device to the AC adapter.  
If the status indicator flashes red again, contact the Service Desk.  
26  
Fujitsu  
           
Working with the notebook  
Opening the notebook  
Open the LCD screen.  
CAUTION:  
Do not pick up or hold the computer by the LCD screen. This can damage  
the LCD screen due to excessive flex. Always lift or carry your computer  
by holding the keyboard base with both hands.  
Fujitsu  
27  
 
Working with the notebook  
Switching the notebook on  
NPowte  
e
b
r
o-onk:insdwiictcahtoin on  
r
g
1
Slide the ON/OFF switch (1) to the right to switch on the notebook.  
The ON/OFF switch (1) returns automatically to its original position.  
The power-on indicator next to the ON/OFF switch (1) is lit as long as the system is switched on.  
Programming the ON/OFF switch  
You can program the ON/OFF switch:  
Operating system  
Menu  
Windows 10 Start - Control Panel - (Browse Control  
Panel - ) Power Options - Choose what the power  
buttons do  
Windows® 10 Pro, Home and S  
If you have assigned a password, you must enter this when requested to  
do so, in order to start the operating system. Detailed information can be  
found in the chapter "Security functions", Page 62.  
28  
Fujitsu  
       
Working with the notebook  
Different ways to use your notebook  
The different working modes allow you to use your device in a number of different usage scenarios.  
Laptop Mode  
Stand Mode  
Tent Mode  
Tablet Mode  
OS Mode  
Desktop  
OFF  
Tablet  
ON  
Windows 10  
Pro  
Auto rotation  
Keyboard /  
Touchpad  
ON  
OFF  
OS Mode  
Auto rotation  
Keyboard  
Desktop  
OFF  
Desktop  
OFF  
Tablet  
ON  
Windows 10 S  
OFF  
ON  
ON  
ON  
OFF  
Touchpad  
From notebook to Tablet PC  
Raise the LCD screen into a vertical position.  
Fujitsu  
29  
   
Working with the notebook  
You can fold back the LCD screen infinitely variable in an angle  
between 0 and 360 degrees,  
Fold the screen down completely until the back of the screen is positioned  
against the bottom of the device.  
The screen is now in the tablet position. The keyboard, the touchpad and the  
touchpad buttons are switched off in this position.  
Select display orientation (portrait or landscape format)  
LPD  
a
ois  
n
rptdrlsaciytafo  
o
p
r
ri  
e
mefnoatrtatioant  
m
You can choose to use either portrait or landscape for the display, or whether the screen  
orientation should automatically adjust to the orientation of the tablet PC.  
You can change these settings under Control Panel - Hardware and Sound  
- Windows Mobility Center / Rotate screen.  
In the settings there are profiles saved for operation with different screen orientations.  
These profiles have preset standard configurations that can be modified as desired.  
These settings do not just affect the screen settings on the Tablet PC, but  
also on external monitors that are connected.  
30  
Fujitsu  
     
Working with the notebook  
From Tablet PC to notebook  
Raise the LCD screen into a vertical position.  
Fold the monitor down until the desired position is reached.  
Fujitsu  
31  
 
Working with the notebook  
Switching off the notebook  
Notebook  
Close all applications and then shut down your operating system (please  
refer to the "Operating system manual").  
32  
Fujitsu  
   
Working with the notebook  
Closing the notebook  
Fold the LCD screen onto the lower section of the notebook.  
Handwriting recognition  
For detailed information on handwriting recognition, see the documentation for your operating system.  
At present, handwriting recognition on Windows supports the following languages:  
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,  
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,  
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.  
On Windows you can set the required language under Control Panel – Time,  
Language and Region – Language.  
Fujitsu  
33  
   
Working with the notebook  
LCD screen  
LNCoDtescreen  
Background lighting  
LCD screens are operated with background lighting. The luminosity of the background  
lighting can decrease during the period of use of the notebook. However, you can  
set the brightness of your monitor individually.  
Synchronizing the display on the LCD screen and an external monitor  
For more information, please refer to Chapter "Hot keys", Page 43 under  
"Switching between display outputs".  
Using the device as a Tablet PC  
You can execute commands as follows:  
using the stylus (supplied with your device).  
using your finger  
Using your fingers  
You can execute certain commands by using your finger tip on the touchscreen of your device.  
Alternatively, everything which you can select or activate using your finger  
tip can also be selected or activated using the stylus.  
Calibrating the Dual Digitizer for finger-based operation of the device  
Please see chapter "Calibrating the stylus", Page 37 for instructions on how  
to calibrate your device to use Dual Digitizer Technology.  
Please note: There are separate calibration programs available for calibrating  
the stylus and for calibrating finger-based operation. Do not use the calibration  
tool for the stylus to calibrate finger-based operation.  
34  
Fujitsu  
         
Working with the notebook  
Using the stylus  
Pen  
1 = stylus tip  
5
2 = stylus button (= eraser)  
4
3 = stylus button (= right mouse button)  
4 = charging contacts  
5 = eyelet for optional stylus tether  
3
2
1
Software will need to be downloaded which includes an overview on the  
You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to  
navigate through the programs. Programs that support handwriting recognition also allow you to  
write directly on the screen with the stylus. You can also use the stylus as a drawing tool.  
A stylus tether is available as an optional extra and you can use this to tie the  
eyelet on the stylus to the eyelet on the Tablet PC.  
Use only the stylus that was provided with your Tablet PC. Do not use any other pointed  
object as a substitute, that was not specially designed for your Tablet PC. Replace  
the stylus tip if it is worn. The warranty does not cover a scratched screen.  
While writing, take care that you do not scratch the surface of the  
display (e.g. with a wristwatch or bracelet).  
To prevent the stylus from jamming in its slot, always make sure that  
you insert the stylus correctly into its slot (the charging contacts on the  
stylus point towards the rear of the Tablet PC).  
Fujitsu  
35  
   
Working with the notebook  
The stylus of the Tablet PC is an electronic instrument that can be damaged  
if used improperly. Handle the stylus with care.  
Our recommendations for proper handling of the stylus are as follows:  
Do not gesture with the stylus.  
Do not use the stylus as a pointer.  
Do not use the stylus on surfaces other than the screen of the Tablet PC.  
Do not try to turn the grip of the stylus. The grip is used to put the  
stylus into its slot or to take it out of its slot.  
Never store the stylus with its weight on the tip (e.g. with the tip pointing down in a  
pen container). If the stylus is stored with the tip pointing down, this may have an  
adverse effect on the stylus mechanism (particularly under high temperatures). In  
this case the stylus tip may react as though it is constantly being pressed down. To  
avoid damage, the stylus should be stored in the slot when not in use.  
The stylus can be influenced by electromagnetic fields (cursor quivers or  
jumps). There may be a few areas on the screen where the cursor quivers  
slightly in spite of pressing the stylus down firmly.  
The screen responds to entries made with the tip of the finger or the stylus when the  
tip of the finger or the stylus directly touches the screen.  
You can use the stylus to perform almost all functions for which you would otherwise use a mouse.  
Action  
Mouse  
Stylus  
Selecting menu  
items  
Click with the left mouse button.  
Tap on the menu entry with the tip of  
the stylus.  
Starting programs Double-click with the left mouse  
button.  
Tap on the program symbol twice in  
rapid succession using the stylus tip.  
Moving an object Drag with the left mouse button  
Place the stylus tip directly on the  
object or window. Keep the stylus tip  
held against the screen. Drag the  
desired object or window.  
or window  
pressed.  
Opening a context Click with the right mouse button.  
menu  
Tap on the desired element with the  
stylus and keep the stylus pressed  
against the screen.  
Moving the cursor Move the mouse  
Place the tip of the stylus directly on  
the screen.  
Energy saving functions of the stylus  
To save energy, the stylus automatically switches off after 10 minutes of inactivity  
and switches to power saving mode.  
The stylus automatically returns to normal operating mode when the stylus tip is touched again.  
36  
Fujitsu  
Working with the notebook  
Charging the stylus battery  
The stylus contains a built-in battery, which is automatically charged when the stylus is fully inserted  
in its slot. The stylus is also charged when the notebook is in power saving mode or is switched off.  
A charging time of approximately 15 seconds is sufficient to able to stylus to be used for 90 minutes.  
Insert the stylus fully into the slot.  
After a charging period of approximately 5  
minutes, the stylus battery is fully charged.  
Adjusting the stylus  
Operating system  
Menu  
Windows® 10 Pro,  
Home and S  
Under System Control - Hardware and Sound - Pen and Touch you can make  
various settings for the stylus.  
Calibrating the stylus  
Before first use with the stylus, you must calibrate your Tablet PC via the operating  
system, so that it recognizes the stylus as accurately as possible.  
You should also always repeat the calibration if the co-ordination between the  
stylus and the cursor movement deteriorates.  
Operating system  
Menu  
Windows® 10 Pro,  
Home and S  
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the  
Control Panel. You need to calibrate both portrait and landscape formats.  
Fujitsu  
37  
   
Working with the notebook  
Securing a stylus tether  
You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it.  
Secure the end of the stylus tether with the smaller loop to your stylus.  
Secure the end of the stylus tether with the larger loop to your notebook.  
38  
Fujitsu  
Working with the notebook  
Using the device as a notebook  
Touchpad and touchpad buttons  
Keep the touchpad clean. Protect it from dirt, liquids and grease.  
Touchpad  
Do not use the touchpad if your fingers are dirty.  
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.  
1 = Touchpad  
1
2 = Touchpad buttons  
2
The touchpad enables you to move the mouse pointer on the monitor.  
The touchpad buttons allow you to select and execute commands. They correspond  
to the buttons on a conventional mouse.  
You can also deactivate the touchpad via a key, so that you cannot move the pointer  
on the monitor unintentionally (see chapter "Hot keys", Page 43).  
Moving the pointer  
Move your finger on the touchpad.  
Touchpad  
The pointer will move.  
Selecting an item  
Move the pointer to the item you wish to select.  
Touchpad  
Tap the touchpad once or press the left button once.  
The item is selected.  
Executing commands  
Move the pointer to the field you wish to select.  
Touchpad  
Tap the touchpad twice or press the left button twice.  
The command is executed.  
Fujitsu  
39  
             
Working with the notebook  
Dragging items  
Select the desired item.  
Touchpad  
Press and hold the left button and drag the item to the desired position  
with the finger on the touchpad.  
The item will be moved.  
Switching the Touchpad on and off  
You can switch the Touchpad on and off using a key, see "Hot keys", Page 43.  
Keyboard  
KNkeeu  
y
ymseberaicrrkdkeeyyppaadd  
b
o
The keyboard of your notebook is subject to continuous wear through normal  
use. The key markings are especially prone to wear. The key markings are  
liable to wear away over the life of the notebook.  
The keyboard has been designed to provide all the functions of an enhanced keyboard.  
Some enhanced keyboard functions are mapped with key combinations.  
The following description of the keys applies to the Windows operating system. Additional functions  
supported by the keys are described in the relevant manuals supplied with your application programs.  
The following illustration shows how to access the different characters on keys with overlaid  
functions. The example applies when the Caps Lock key has not been activated.  
The illustration may differ from your device.  
Depending on the region you live in, your notebook is delivered with a monolingual  
keyboard layout (USA) or a bilingual keyboard layout (Canada).  
40  
Fujitsu  
       
Working with the notebook  
Key  
Description  
Backspace key  
Backspace  
The  
key deletes the character to the left of the cursor.  
Backspacekey  
Tab key  
Tab  
The  
key moves the cursor to the next tab stop.  
Tabkey  
Enter key (return)  
Enter  
The  
key terminates a command line. The command you have entered  
is executed when you press this key.  
RELinen  
t
e
eu  
f
r
e
kn  
e
ey  
d
Caps Lock key  
Caps Lock  
Caps Lock Fix Maj  
key activates the Caps Lock mode, and  
The  
/
the corresponding icon is displayed in the Windows information area. In  
Caps Lock mode, all of the characters you type appear in upper case. In  
the case of overlay keys, the character printed on the upper left of the key  
will appear when that key is pressed. To cancel the Caps Lock function,  
Bilingual keyboard:  
simply press the Caps Lock key again.  
CapsLockkey  
Shift key  
Shift  
The  
key causes uppercase characters to appear. In the case of  
Shift  
overlay keys, the character printed on the upper left of the key will appear  
when that key is pressed.  
Shiftkey  
Fn key  
Fn  
The  
key enables the special functions indicated on overlay keys.  
Fnkey  
Windows key  
Windows  
The  
key switches between the start screen and the last used  
application.  
Windowskey  
Alt key  
Alt  
The  
key activates special functions when it is pressed in combination  
with other keys.  
Context Menu key  
Context Menu  
The  
key opens the menu for the active application.  
Bilingual keyboard:  
Ctrl key  
Ctrl  
The  
key activates special functions when it is pressed in combination  
with other keys.  
Fujitsu  
41  
                     
Working with the notebook  
Key  
Description  
Cursor keys  
The cursor keys move the cursor in the direction of the arrow, i.e. up, down,  
left, or right.  
Cursorkcoenystrol  
Home key  
The  
Home  
Home/Debut  
key jumps to the beginning of the line, document  
/
page, cell or screen of where the cursor is positioned.  
Bilingual keyboard:  
Bilingual keyboard:  
Bilingual keyboard:  
End key  
The  
End  
End/Fin  
key jumps to the end of the line, document page, cell or  
/
screen of where the cursor is positioned.  
Insert key  
When pressing the  
modes:  
Insert  
Insert/Insér  
key, you change between two input  
/
1. Typeover mode: When typing, you overwrite the character at the current  
cursor position.  
2. Insert mode: While typing, another character at the current cursor  
position is inserted. All characters right of the cursor will be shifted  
by one position.  
Delete key  
When pressing the  
Delete  
Delete/Suppr  
key, the character before the / on  
/
the right of the cursor will be deleted.  
Bilingual keyboard:  
42  
Fujitsu  
   
Working with the notebook  
Hot keys and function keys  
The top row of your notebook’s keyboard has both hot key and function key icons:  
1
2
3
4
1
2
= Top row of a monolingual keyboard layout  
= Top row of a bilingual keyboard layout  
3
4
= Hot key  
= Function key  
Hot keys  
Hot keys are the icons on the top of the keys.  
The hot keys activate features on your device (e. g. loudpeakers on/off, microphone enable/disable,  
volume increase/decrease, brightness increase/decrease). Hot keys are convenience features.  
Hot keys are always the primary key functionality at Windows startup (see  
Hot key  
Description  
Enable/Disable the microphone*  
This hot key enables and disables the microphone.  
Microphone  
Switch the speakers on and off  
This hot key switches your notebook’s speakers off or on.  
Speaker  
Decrease the volume  
This hot key reduces the volume of the internal speakers.  
Volume  
Increase volume  
This hot key increases the volume of the internal speakers.  
Volume  
Switch the wireless components on/off*  
This hot key switches the wireless components off or on.  
Wirelesscomponents  
Switch the touchpad and touchpad buttons on/off*  
This hot keyswitches the touchpad and the touchpad buttons on or off.  
Touchpadbuttons  
Fujitsu  
43  
                       
Working with the notebook  
Hot key  
Description  
Decrease the brightness of the screen  
This hot key decreases the brightness of the screen.  
LB  
C
rigD  
h
s
t
cn  
r
e
e
s
e
softhescreen  
n
Increase the brightness of the screen  
This hot key increases the brightness of the screen.  
Brightnessofthescreen  
Activate energy saving functions*  
This hot key activates the Function Manager.  
Energysavingfunctions  
Switch between display outputs*  
Use this hot key to select which screen(s) is/are used for display if an  
external monitor is connected.  
Screen output is possible:  
only on the notebook’s LCD screen  
on the LCD screen of the notebook and the external monitor at the  
same time  
only on the external monitor  
This setting is useful if you would like a high resolution and a high  
refresh rate on an external monitor.  
FSnw+itFch10betweendisplayoutputs  
Create a screnshot  
With this hot key, a screenshot of the current screen image is created and  
stored in the clipboard.  
Bilingual keyboard:  
Bilingual keyboard:  
Enable/Disable virtual number keys  
This hot key enables and disables the virtual number keys. Those characters  
are issued, which are located at the top right corner of the respective keys.  
* These functions do not work while the computer is at a high load.  
Function keys  
The function keys are the icons on the bottom of the keys.  
F1  
F12  
The function keys are numbered from  
up to  
.
The function keys serve as short-cut key functions and activate operating  
system and/or software functions.  
Regardless of the F Lock setting, the function keys are always the primary key functionality:  
until Windows is loaded (after rebooting the system).  
Then the primary keys functionality are maintained from the last F Lock setting  
prior to reboot (see chapter "F Lock settings", Page 45).  
Fn  
F2  
Fn  
F2  
F12  
F12  
when accessing BIOS during POST: If  
+
or  
+
or  
are pressed during boot,  
key alone.  
the BIOS menu is not started. You must press the  
44  
Fujitsu  
           
Working with the notebook  
F Lock settings  
F Lock  
By pressing the  
key, you may lock either the hot keys or function keys as the  
primary or secondary key functionality for the top row of keys.  
F Lock is set to off by default.  
Fn  
Esc  
Press  
+
to switch F Lock on or off.  
Caps Lock  
If F Lock is set on, it stays on like the key.  
When switching the F Lock settings, the primary or secondary key functionality changes as follows:  
Status  
F Lock is off (F Lock indicator is Hot keys become the primary  
not illuminated)  
keys:  
Press the hot key alone.  
F Lock is on (F Lock indicator Hot keys become the secondary Function keys become the  
Hot key  
Function key  
Function keys become the  
secondary keys:  
Fn  
+ function key.  
Press  
is illuminated)  
keys:  
primary keys:  
Press the function key  
alone.  
Fn  
Press  
+ hot key.  
Key combinations  
Keycombinations  
The following description of key combinations applies to Windows operating systems. Some of the  
following key combinations may not function in other operating systems or with certain device drivers.  
Other key combinations are described in the relevant manuals supplied  
with your application programs.  
Key combinations are entered as follows:  
Press the first key in the key combination and keep it pressed.  
While holding the first key down, press the other key or keys in the combination.  
Combination  
Description  
Switch F Lock setting on/off  
This key combination switches the F Lock setting  
on/off (see chapter "F Lock settings", Page 45).  
Switch between open applications  
This key combination switches between several open  
applications.  
Alt+Tab  
Bilingual keyboard:  
Fujitsu  
45  
       
Working with the notebook  
Combination  
Description  
Open Windows Security/Task Manager window  
This key combination opens the Windows  
Security/Task Manager window.  
Ctrl+Alt+Del  
Bilingual keyboard:  
Back tab  
This key combination moves the cursor back to the  
Shift  
previous tab stop.  
SBahcifkt+taTbab  
Enable/Disable Scroll Lock  
This key combination activates special functions,  
which differ from application to application.  
Fn+ScrollLock  
Bilingual keyboard:  
Toggle backlit keyboard settings  
This key combination toggles the backlit  
keyboard settings between low, high and off  
(configuration-dependent).  
SBahcifkt+taTbab  
Key combinations using the Windows keys are detailed in the manual  
for your operating system.  
In addition, the following non-labeled key combinations are supported:  
Fn  
Fn  
S
B
+
+
= Pause  
= Break  
Fn  
R
+
= SysRq  
46  
Fujitsu  
       
Working with the notebook  
Virtual number keys  
VN  
i
u
rtmuaeLlro  
n
ic  
u
k
mebyeparkeys  
d
Virtual number keys are provided so that the keys of a number keypad can be used for certain  
applications. The virtual number keys are recognizable on the keyboard by the numbers and  
symbols printed in the upper right corner of each key. If you have switched on the virtual number  
keys, you can output the characters shown on the upper right of the keys.  
The key assignment shown below may be different from the  
keyboard layout of your device.  
&
*
/
7
9
8
4
5
6
*
:
;
1
-
3
2
<
>
?
/
+
0
Num Lk  
Num Lk  
(bilingual  
) key is active  
1
= Character valid when the  
Num Lk/Num  
(bilingual  
2
= Character valid when the  
keyboard:  
Num Lk/Num  
keyboard:  
) key is not active  
Further information about the status indicators can be found in chapter "Status indicators", Page 24.  
Country and keyboard settings  
Make the country and keyboard settings as described in the documentation for your operating  
system.  
Fujitsu  
47  
       
Working with the notebook  
Webcam  
Webcam  
Depending on the software used, you can use your webcam to take pictures,  
record video clips or take part in web chats.  
The picture quality depends on the lighting conditions and the software being used.  
You can only operate the webcam with a particular application (e.g. an Internet telephony  
program or a video conferencing program which supports a webcam).  
When using the webcam, the notebook base must not wobble.  
The webcam automatically adjusts itself to the current light level. For this reason  
the LCD display may flicker while the light level is adjusted.  
Further information on use of the webcam and additional settings for your webcam  
can be found in the help function of the program using the webcam.  
48  
Fujitsu  
   
Working with the notebook  
Rechargeable battery  
SRBaetrctvehicra  
y
e
rgliefe  
a
,
b
b
laet  
b
te ttery  
a
r
y
During mobile use, the notebook runs on its built-in battery. You can increase the  
service life of the battery by caring for the battery properly. The average battery  
service life is around 800 charge/discharge cycles.  
You can extend the battery service life by taking advantage of the available energy saving functions.  
Charging, caring for and maintaining the battery  
Battery  
The notebook battery can only be charged if the ambient temperature is between  
5°C / 41°F and a maximum of 35°C / 95°F.  
You can charge the battery by connecting the notebook to the AC adapter  
Be aware that the battery will not charge when the battery charge level is between  
90% and 100%. If the battery charge level is less than 90% and the AC adapter  
is connected, the battery charges up to 100%.  
If the battery is running low, an alert is triggered. If you do not connect the AC adapter within  
five minutes after the alert tone, your notebook will automatically switch off.  
Monitoring the battery state of charge  
Bba  
a
t
t
t
t
e
errychargemeter  
y
Windows also has a "Battery charge meter" in the taskbar for monitoring the  
battery capacity. When you place the mouse pointer on the battery symbol, the  
system displays the state of charge of the battery.  
Battery storage  
BSCaehtlaft-erdgriyescahpaarg  
c
e
it bbaattteteryry  
,
y
,
The battery should be stored in a dry environment at a temperature between 0°C / 32°F and  
30°C / 86°F. The lower the storage temperature, the lower the rate of self-discharge.  
If you will be storing a battery for a longer period (more than two months),  
the battery charge level should be approx. 30%. To prevent exhaustive  
discharge which would permanently damage the battery, check the level  
of charge of the battery at regular intervals.  
To be able to make use of the optimum capacity of the battery, you should allow  
the battery to fully discharge and then recharge it.  
If you do not intend to use a battery for long periods of time, remove it  
from the notebook. Never store batteries in the unit!  
Fujitsu  
49  
                   
Working with the notebook  
Removing and installing the battery  
Only use batteries approved by Fujitsu for your notebook.  
Never use force when fitting or removing a battery.  
Make sure that no foreign bodies get into the battery connections.  
Never store a battery for long periods in the discharged state. This  
can make it impossible to recharge.  
Removing a battery  
Please observe the safety information in chapter "Important notes", Page 14.  
Remove the power plug from the power outlet!  
If the notebook is connected to a USB Type-CTM dock, release the USB cable  
(USB Type-CTM) to disconnect the connection.  
You can replace the device’s battery without having to switch the device off  
first. The device has a built-in bridge battery for this purpose. If the battery is  
unlocked while the device is in operating mode, Sleep Mode will automatically  
be activated. Before removing the battery, please check the battery replacement  
status indicator (see "Status indicators", Page 24).  
Close the LCD screen.  
Remove all the cables from the device.  
Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an  
anti-slip cloth on this surface to prevent the device from being scratched.  
1
3
2
Slide the Battery Lock slider switch in the direction of the arrow (1) and hold it in place.  
50  
Fujitsu  
   
Working with the notebook  
Slide the Battery Lock slider switch in direction of the arrow (2).  
As soon as the battery is unlocked, the battery replacement status indicator (3) lights up and  
shows whether the device is ready for battery replacement (see "Status indicators", Page 24).  
The status indicator only lights up if the device is switched on during battery replacement.  
If the device is not ready for battery replacement and the battery is replaced  
nonetheless, the device will switch itself off. Any data not saved may be lost.  
4
Remove the battery from the battery compartment (4).  
Fujitsu  
51  
Working with the notebook  
Installing a battery  
1
2
3
2
Insert the battery in the battery compartment (1).  
Slide the battery lock slider switch in the direction of the arrow (2).  
The battery is secured. The battery replacement status indicator (3) goes out.  
Turn the notebook the right way up again and place it on a flat surface.  
Reconnect the cables that were previously disconnected.  
52  
Fujitsu  
 
Working with the notebook  
Using the energy saving functions  
EBnaettergry  
The notebook uses less power when the available energy-saving functions are used. You will  
then be able to work longer when using the battery before having to recharge it.  
ECO  
The  
key activates the Function Manager which maximizes your LIFEBOOK’s  
environmentally friendly attributes.  
The energy efficiency is increased and environmental pollution is reduced.  
By choosing the best power options, you can make significant savings and  
at the same time help protect the environment.  
When you fold down and close the LCD screen, depending on the setting in Windows,  
the notebook automatically enters a power saving mode.  
The recommended settings for the Windows energy saving functions are predefined as "Fujitsu  
Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.  
Set the energy saving functions in your Control Panel.  
If you need further information about an option, you can get help with most  
F1  
settings by pressing  
to open the Microsoft Help.  
When the notebook is in energy saving mode, the following must be remembered:  
During energy saving mode, open data is held in main memory or  
in a swap file on the hard disk.  
Never switch the notebook off while it is in an energy saving mode. If the built-in battery  
is nearly flat, close all open files and do not go into energy saving mode.  
If you do not intend to use your notebook for a long period of time:  
Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard  
or by switching on the notebook.  
Close all opened programs and completely shut down the notebook.  
Fujitsu  
53  
     
Working with the notebook  
Memory cards  
Slot  
Your notebook is equipped with an integrated memory card reader.  
Follow the manufacturer’s instructions when handling the memory cards.  
Memorycard  
Supported formats  
Your notebook supports the following formats:  
Secure Digital (SDTM Card)  
SDHC  
SDXC  
Inserting the memory card  
Gently push the memory card into the slot  
until you feel it click into place. The label  
area must be facing upward. Do not apply  
excessive force, as otherwise the delicate  
contact surfaces could be damaged.  
Memorycard  
Depending on the particular type  
used, the memory card may protrude  
slightly from the slot.  
54  
Fujitsu  
           
Working with the notebook  
Removing the memory card  
Memorycard  
To avoid any loss of data, always follow the correct procedure for removing the  
card (see the documentation for your operating system).  
On devices with card locking: Press  
on the memory card (1).  
Memorycard  
The memory card is released and  
can now be removed.  
Pull the memory card out of the slot (2).  
1
2
Speaker and microphone  
MSVopicleur  
a
omkp  
e
h
rc  
o
o
n
ntrol  
e
You can find information about the exact position of speakers and microphones  
Please refer to chapter "Hot keys", Page 43 for information on setting the volume  
and also enabling/disabling the speakers using keys.  
If you attach an external microphone, the built-in microphone is disabled.  
When you connect headphones or external speakers, the built-in speakers are disabled.  
You can find information on connecting headphones and a microphone in  
Fujitsu  
55  
         
Working with the notebook  
Optional wireless LAN / Bluetooth wireless  
components  
The installation of radio components not approved by Fujitsu will invalidate  
the certifications issued for this device.  
Depending on the system configuration ordered, your system will be  
equipped with wireless LAN and Bluetooth.  
Switching the wireless components on and off  
F5  
to switch the wireless components on and off.  
Press the key  
WBluiretloeossthLAN  
The wireless component indicator will illuminate when one or more wireless  
components are switched on.  
The Bluetooth module and the wireless LAN transmission unit (antenna) will all  
be switched off when you switch off the wireless components.  
Pay attention to the additional safety notes for devices with wireless components  
provided in the "Safety/Regulations" manual.  
Details on using a wireless LAN can be found in the online help system  
included in the wireless LAN software.  
Configuring WLAN access  
Requirement: A WLAN is available and you have the necessary access data to hand.  
Information on configuring WLAN access can be found in the  
documentation for your operating system.  
Further information on WLAN and Bluetooth  
For further information about WLAN or Bluetooth, please refer to the  
appendix of this Operating Manual.  
For WLAN specifications, see chapter "WLAN specifications", Page 99.  
56  
Fujitsu  
           
Working with the notebook  
Ethernet and LAN  
EthernetLAN  
The internal network module of your notebook supports Ethernet LAN. You can use it to  
establish a connection to a local network (LAN = Local Area Network).  
Connect the network cable to the LAN  
port of the notebook (1).  
Connect the network cable to your  
network connection (2).  
1
2
Your network administrator can help you to configure and use the LAN connections.  
The network cable is not included in the delivery scope. This type of  
cable can be obtained from a specialist dealer.  
Fujitsu  
57  
   
Working with the notebook  
Your USB Type-C dock (optional)  
Your dock is a device that helps you to quickly connect your notebook to your  
peripheral devices, such as a monitor, printer, etc.  
The features offered by the dock include standard ports for monitor, audio and  
other USB devices, such as mouse and keyboard.  
You need only connect the notebook to the dock in order to work with your peripheral devices.  
Ports on the dock  
dP  
o
o
crtk  
s
8
7
2
6
5
4
1
3
2
8
9
10  
1
2
3
4
5
6
7
= Combined headphones/microphone port  
= USB 3.0 port (USB Type-A)  
= VGA monitor port  
= HDMI  
8
= ON/OFF switch with power-on indicator  
= DC input connector (DC IN)  
9
10 = USB 3.1 Gen 1 port for data connection  
and power supply for the notebook  
(USB Type-C)  
= Display Port  
= LAN port  
= USB 3.1 Gen 1 port for data connection  
only (USB Type-C)  
58  
Fujitsu  
       
Working with the notebook  
Setting up the dock  
Select a suitable location for the dock before setting it up. In doing  
so, please follow these instructions:  
Never place the dock on a soft surface (e.g. carpeting, upholstered furniture, bed). This  
can block the air vents of the notebook and cause overheating and damage.  
Place the dock on a stable, flat and anti-slip surface. Please note that the  
rubber feet may mark certain types of surfaces.  
Never place the dock and the mains adapter on a heat-sensitive surface.  
Do not expose the dock to extreme environmental conditions.  
Protect the dock from dust, humidity and heat.  
Connecting the AC adapter to the dock  
Connect the AC cable to the AC adapter (1).  
Plug the AC cable into the power outlet (2).  
Connect the AC adapter cable to the DC  
jack (DC IN) of the dock (3).  
3
2
1
When the notebook is connected to a dock, the operating system creates a  
hardware profile for the "Docked" mode. In this profile, for example, the monitor  
which was last used for output is saved as a setting. This profile will be loaded  
as soon as the notebook is connected to a dock of the same type.  
Fujitsu  
59  
   
Working with the notebook  
Connecting the notebook to the dock  
Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.  
1
2
Connect one end of the USB cable (USB Type-C) to the USB 3.0 port with  
charging function (USB Type-C) on the notebook (1).  
Connect the other end of the USB cable (USB Type-C) to the USB 3.0 port for data  
connection and power supply (USB Type-C) on the dock (2).  
60  
Fujitsu  
 
Working with the notebook  
Switching on the notebook via the dock  
Press the ON/OFF switch on the dock to switch on the notebook.  
Switching off notebook via dock  
Close all applications and then shut down your operating system (please  
refer to the manual for the operating system).  
If the notebook cannot be shut down properly, press the ON/OFF switch on  
the dock for approx. four seconds. The notebook will switch off. However,  
any unsaved data may be lost in the process.  
Disconnecting the notebook from the dock  
Disconnect the supplied USB cable (USB Type-C) from the USB 3.0 port  
(USB Type-C) on the notebook.  
Fujitsu  
61  
     
Security functions  
Security functions  
Securityfunctions  
Your notebook has a variety of security functions that you can use to protect your  
system and your personal data from unauthorized access.  
This chapter explains how to use these functions, and what the benefits are.  
Please remember that in some cases, for example, forgetting your password,  
you may be locked out of the system and unable to access your data.  
Therefore, please note the following information:  
Make regular backups to external optical disks such as external hard  
drives, CDs, DVDs or Blu-ray Discs.  
Some security functions need you to choose passwords. Make a note  
of the passwords and keep them in a safe place.  
If you forget your passwords you will need to contact our Service Desk.  
Deletion or resetting of passwords are not covered by your warranty  
and a charge will be made for assistance.  
62  
Fujitsu  
   
Security functions  
Brief overview of the security functions  
Detailed information about the security equipment of your system can be found  
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD  
or on our website at "http://www.fujitsu.com/us/support/".  
Security function  
Type of protection  
Preparation  
Security Lock  
Mechanical  
Fit and lock the Kensington  
Lock Cable (accessory).  
Fingerprint sensor  
Biometric  
Install the supplied software.  
(configuration dependent)  
Palm vein sensor (configuration Biometric  
dependent)  
Install the supplied software.  
BIOS password protection  
Password protection for  
the BIOS Setup, operating  
system and hard disk with  
Specify at least one supervisor  
password in the BIOS Setup  
and activate the password  
supervisor and user password. protection for the operating  
The passwords consist of a system and hard disk as  
maximum of eight alphanumeric desired.  
characters.  
Boot from Removable Media  
Owner Information  
Prevents unauthorized booting In the BIOS Setup, go to the  
of an operating system from  
Security menu and edit the Boot  
external media (e.g. USB stick, from Removable Media option.  
USB CD-ROM drive, etc.).  
Display service desk or owner In the BIOS Setup, go to the  
information during the boot  
Security menu and edit the  
process.  
Owner Information option.  
Smart Card reader  
PIN and SmartCard protection To use the SmartCard reader  
(configuration dependent)  
for the operating system  
functions, install suitable  
software.  
Trusted Platform Module  
(configuration dependent)  
Identification and authentication Define a supervisor password  
of the notebook  
in the BIOS Setup and enable  
the TPM (Security Chip).  
Fujitsu  
63  
 
Security functions  
Configuring the fingerprint sensor  
(configuration dependent)  
Fingerprintsensor  
The fingerprint sensor can record the image of a fingerprint. With additional fingerprint  
software, this image can be processed and used instead of a password.  
1
Install the fingerprint software to be able to use the fingerprint sensor (1).  
64  
Fujitsu  
     
Security functions  
Configuring the palm vein sensor (configuration  
dependent)  
Palmveinsensor  
The palm vein sensor can record the image of the veins on the palm of your hand. This image  
is evaluated with additional software and can be used in place of a password.  
Install the software to use the palm  
vein sensor (1).  
1
You can obtain further information on the palm vein sensor in the  
"appendix: Miscellaneous Information".  
The palm vein sensor is not supported on Windows® 10 S configurations.  
Using the Security Lock  
Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You  
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook  
from theft. The Kensington Lock Cable is available as an accessory.  
Fujitsu recommends the use of a combination lock.  
Fit the Kensington Lock Cable to the  
mechanism on your notebook.  
KUMAens  
e
nitcni-s  
h
gtihantehngfe  
i
tc  
o
ps  
a
n
erl  
o
Lcs  
t
uoe  
e
rc  
c
iku  
t
y
i
Cr  
o
ilotnayble  
c
k
Fujitsu  
65  
           
Security functions  
Configuring password protection in BIOS Setup Utility  
Before using the various options for password protection in the BIOS Setup  
Utility, please proceed as follows to increase data security:  
Make a note of the passwords and keep them in a safe place. If you forget your  
supervisor password you will not be able to access your notebook. Passwords are  
not covered by your warranty and a charge will be made for assistance.  
Passwordprotection  
Your password can be up to 32 characters long and can contain letters, numbers and  
special characters. A distinction is made between upper and lower case.  
When using special characters, please note that these are dependent on  
the country-specific variant of the keyboard used.  
Protecting BIOS Setup Utility (supervisor password  
and user password)  
If you have opened these operating instructions on the screen, we recommend  
that you print them out. You cannot call up the instructions on the screen  
while you are setting up the password.  
BIOSSetupUtility  
The supervisor password and the user password both prevent unauthorized use of the BIOS  
Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup  
Utility, while the user password will only give you access to some of the functions. You can  
only set up a user password if a supervisor password has already been assigned.  
Calling and using the BIOS Setup Utility is described in the chapter  
Assigning the supervisor and user passwords  
Start the BIOS Setup Utility and go to the Security menu.  
Select the Set Supervisor Password field and press the Enter key.  
With Enter new Password: you are asked to enter a password.  
Enter the password and press the Enter key.  
Conrm new Password requires you to confirm the password.  
Enter the password again and press the Enter key.  
Changes have been saved is displayed as a confirmation that the new password has been saved.  
To set the user password, select Set User Password and proceed exactly as  
when configuring the supervisor password.  
If you do not want to change any other settings, you can exit BIOS Setup Utility.  
In the Exit menu, select the option Save Changes & Exit.  
Select Yes and press the Enter key.  
PSUausspeserpwrvaoisrsdo  
wr  
pardssword  
o
The notebook is then rebooted and the new password comes into effect. It will now be necessary  
to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please  
note that the user password only provides access to a few of the BIOS settings.  
66  
Fujitsu  
             
Security functions  
Changing the supervisor password or user password  
You can only change the supervisor password when you have logged into the  
BIOS Setup Utility with the supervisor password.  
PSUausspeserpwrva  
o
i
s
srsdo  
w
rpordssword  
a
Start the BIOS Setup Utility and go to the Security menu.  
When changing the password, proceed exactly as when assigning a password.  
Removing passwords  
To remove a password (without setting a new password) perform the following steps:  
PSUausspeserpwrva  
o
i
s
srsdo  
w
rpordssword  
a
Start the BIOS Setup Utility and go to the Security menu.  
Highlight the Set Supervisor Password or Set User Password field and press the Enter key.  
You will be requested to enter the current password by the Enter Current Password prompt.  
Enter New Password will appear and you will be requested to enter a new password.  
Press the Enter key twice at this request.  
In the Exit menu, select the option Save Changes & Exit.  
Select Yes and press the Enter key.  
The notebook will now reboot with the password removed.  
With the supervisor password, you simultaneously deactivate the user password.  
Password protection for booting the operating system  
With the supervisor password you have set in the BIOS Setup Utility (see  
also prevent booting of the operating system.  
Operatingsystem  
Activating system protection  
Start the BIOS Setup Utility and go to the Security menu.  
Operatingsystem  
Select the Password on Boot option and press the Enter key.  
Select the option you require (Disabled, First Boot or Every Boot) and press the enter key  
Select the Save Changes & Exit option under Exit.  
The notebook will reboot. You will be prompted to enter your password (the supervisor password).  
Deactivating system protection  
Start the BIOS Setup Utility and go to the Security menu.  
Operatingsystem  
Select the Password on Boot option and press the Enter key.  
Select the Disabled option and press the Enter key.  
If you do not want to change any other settings, you can exit BIOS Setup Utility.  
Select the Save Changes & Exit option under Exit.  
The notebook will reboot. The system is no longer password-protected.  
Fujitsu  
67  
               
Security functions  
Password protection for the hard disk  
If a supervisor password was set, an additional password for the hard disk  
can be set in the Hard Disk Security menu.  
The hard disk is protected by this password. Data on this hard disk can then only be  
read in another system if the correct password is entered.  
Smart Card reader (configuration-dependent)  
Securityfunctions  
Smart Cards are not supplied as standard equipment. You can use all Smart Cards that comply with  
the ISO standard 7816-1, -2 or -3. These Smart Cards are available from various manufacturers.  
With the appropriate software you can use your Smart Card as an alternative to password  
protection, but also as a digital signature, for encrypting your e-mails or for home banking.  
We recommend that you always use two Smart Cards. Always keep one of the Smart Cards  
in a safe place if you are carrying the other Smart Card with you.  
Inserting the Smart Card  
Do not use force when inserting and removing the Smart Card.  
Make sure that foreign objects do not fall into the Smart Card reader.  
Slide the Smart Card into the Smart  
Card reader with the chip facing  
upwards and to the front.  
68  
Fujitsu  
         
Security functions  
Trusted Platform Module - TPM  
TrPuMstedPlatformModule  
To use the TPM, you must enable the TPM in the BIOS-Setup before the software is  
installed. The requirement for this is that you have assigned at least the supervisor  
Enabling TPM  
Requirement: You have assigned a supervisor password (see "Security functions", Page 62).  
Call BIOS Setup and select the Security menu.  
Mark the TPM Security Chip Setting field and press the Enter key.  
Select the entry Enabled to enable the TPM  
Once you have enabled the TPM the Clear Security Chip menu item appears.  
You can clear the holder in the TPM using Clear Security Chip. With Enabled,  
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys  
etc.) generated by applications are deleted.  
Take note that you can then no longer access the data you have  
encrypted on the holder-based keys!  
From the Exit menu, select the option Exit Saving Changes.  
Press the Enter key and select Yes.  
The notebook restarts and the TPM is switched on after the reboot.  
Disabling TPM  
Requirement: You have assigned a supervisor password (see "Security functions", Page 62).  
Call BIOS Setup and select the Security menu.  
Mark the TPM Security Chip Setting field and press the Enter key.  
Select the entry Disabled to disable the TPM.  
In the Exit menu, select the option Exit Saving Changes.  
Press the Enter key and select Yes.  
The notebook will now reboot with TPM deactivated.  
Fujitsu  
69  
         
Connecting external devices  
Connecting external devices  
Under all circumstances, please observe the safety notes provided in the  
"Important notes", Page 14 chapter before connecting or disconnecting  
any devices to or from your notebook.  
Always read the documentation supplied with the device you wish to connect.  
Never connect or disconnect cables during a thunderstorm.  
Never pull at a cable when disconnecting it. Always grasp the plug.  
With some devices such as USB devices, it is not necessary to switch off  
the notebook and the device before connecting/disconnecting. For more  
information about whether or not devices need to be switched off, please refer  
to the documentation supplied with the external device.  
Some of the external devices require special drivers (see the operating  
system and external device documentation).  
HDMI port  
HDMIport  
The HDMI port on your notebook or the optional dock can be used to connect an external  
amplifier, LCD TV or a plasma TV with an HDMI connection.  
Connect the data cable to the  
external device.  
Connect the data cable to the HDMI port on  
the notebook or on the optional dock.  
70  
Fujitsu  
     
Connecting external devices  
Connecting an external monitor  
An analogue monitor is connected to the analogue external monitor port (VGA), a digital monitor  
to the Display Port on the optional dock. Display output is limited to a maximum of two monitors  
at any one time (see "Hot keys", Page 43, section "Toggle display output").  
VMGonAisto  
o
r
c
p
k
ort  
e
Analog external monitor port (VGA) (on  
notebook or on optional dock)  
Digital Display Port (on the optional dock)  
Switch off the notebook and the external monitor.  
Plug the data cable of the external monitor into the monitor port.  
First switch on the external monitor and then the notebook.  
You can also switch back and forth between the external monitor and the LCD  
screen of the notebook, see chapter "Hot keys", Page 43.  
You can display the same picture on the external monitor and the  
notebook LCD screen simultaneously.  
Fujitsu  
71  
     
Connecting external devices  
Connecting USB devices  
USBports  
On the USB ports you can connect external devices that also have a USB port  
(e.g. a DVD drive, a printer, a scanner or a modem).  
USB devices are hot-pluggable. This means you can connect and disconnect the  
cables of USB devices while the operating system is running.  
USB 1.x has a maximum data transfer rate of 12 Mbps.  
USB 2.0 has a data transfer rate of up to 480 Mbps.  
USB 3.0 has a data transfer rate of up to 5 Gbps.  
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.  
USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps.  
Additional information can be found in the documentation for the USB devices.  
Connect the data cable to the  
external device.  
Connect the data cable to a USB  
port of the notebook.  
Device drivers  
USB devices will be automatically recognized and installed by your operating system.  
72  
Fujitsu  
   
Connecting external devices  
USB port with charging function (USB Type-C)  
USBportwithchargingfunction(USBType-C)  
At this USB port, you can charge a connected USB device or operate devices without an  
additional power supply (see "Connecting the notebook to the dock", Page 60).  
You can also charge a connected USB device or operate devices without an additional power supply.  
This is also possible with the notebook switched off, if the USB Type-C Power Delivery  
on System-Off function is activated in the Advanced - Miscellaneous Congurations menu  
of the BIOS Setup Utility. Calling up and using the BIOS Setup Utility is described  
USB devices are hot-pluggable. This means you can connect and disconnect the  
cables of USB devices while the operating system is running.  
Additional information can be found in the documentation for the USB devices.  
Connect the data cable to the  
external device.  
+
Connect the data cable to a USB port  
(USB Type-C) on the notebook.  
Fujitsu  
73  
   
Connecting external devices  
USB port with charging function (Anytime USB charge)  
You can use this USB port to charge or supply power to a USB device (e.g. to charge  
a PDA or a mobile phone or to connect a USB lamp).  
This is possible even when the notebook is switched off, if the Anytime USB Charge function is  
enabled in the Advanced/Miscellaneous Congurations menu of the BIOS Setup Utility. If the setting  
AC is selected, the device will only be charged when the AC adapter is connected.  
Calling and using the BIOS-Setup-Utility is described in the section "Settings  
USBchargingfunction  
It is recommended that the notebook be operated with the AC adapter connected  
whenever the USB port with charging function is in use, as this function will drain  
the battery more quickly if an external USB device is being charged.  
The AC adapter must already be connected when the notebook is switched  
off, as otherwise the USB charging function will be disabled and the  
connected USB devices will not be charged.  
Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB  
charging function. In this case the USB charging function will not work when the  
notebook is switched off, as no drivers are active when the notebook is switched off.  
Connect the data cable to the  
external device.  
Connect the data cable to a USB port  
(Anytime USB charge) of the notebook.  
How to remove USB devices correctly  
Always correctly remove the device according to the rules described below,  
to ensure that none of your data is lost.  
With the left mouse button, click on the symbol in the taskbar for safe removal of hardware.  
Select the device you wish to shut down and remove.  
Press the "Enter" key.  
Wait for the dialog box which tells you that it is now safe to remove the device.  
74  
Fujitsu  
     
Connecting external devices  
Headphones/microphone/Line-In/Line-Out/  
headset-combi port  
ACuodnin  
o
e
c
c
otnin  
n
g
e
ah  
c
uetidaoidnops  
d
h
e
o
v
nicess  
e
Using the headphones/microphone/Line-In/Line-Out/headset-combi port, you can connect a  
headset, headphones, a microphone or external speakers to your notebook.  
Windows 10 S configurations: You can connect a headphone. However,  
microphone, Line-In and Line-Out are not supported.  
Connect the audio cable to the  
external device.  
Connect the audio cable to the headphone  
port of the notebook.  
The internal speakers are disabled.  
If you purchase a cable from a retailer, please note the following information:  
The headphones/microphone/Line-In/Line-Out/headset-combi port on  
your notebook is a "3.5 mm jack socket".  
If you want to connect headphones or speakers you will need a "3.5 mm jack plug".  
Fujitsu  
75  
     
Removing and installing components during servicing  
Removing and installing components  
during servicing  
Only qualified technicians should repair your notebook. Unauthorized  
opening or incorrect repair may greatly endanger the user (electric shock,  
fire risk) and will invalidate your warranty.  
Incaseofservice  
Components  
You may remove and install the components described in this chapter yourself  
after consulting the Hotline/Service Desk.  
If you remove and install components without consulting the Hotline/Service  
Desk, then the warranty of your notebook will be voided.  
Notes on installing and removing boards  
and components  
Switch off your notebook and remove the AC plug from the power outlet.  
Always remove the battery.  
Take care when you use the locking mechanisms for the battery and any other component.  
Never use sharp objects such as screwdrivers, scissors or knives as a lever to remove covers.  
IBE  
n
oSs  
a
tDr  
r
u
d
ctions  
s
Boards with electrostatic sensitive devices (ESD) are marked with the label  
shown.  
When handling boards fitted with ESDs, you must always observe the following  
points:  
You must always discharge static build up (e.g. by touching a grounded  
object) before working with boards.  
The equipment and tools you use must be free of static charge.  
Remove the AC plug from the power outlet before inserting or removing  
boards.  
Always hold boards by their edges.  
Never touch connector pins or conductors on the board.  
76  
Fujitsu  
           
Removing and installing components during servicing  
Preparing to remove components  
If you are going to remove or change system components, prepare for the removal as follows:  
Please observe the safety information in chapter "Important notes", Page 14.  
Remove the AC plug from the power outlet!  
Switch the device off.  
The device must not be in energy saving mode.  
Close the LCD screen.  
Remove all the cables from the device.  
Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an  
anti-slip cloth on this surface to prevent the device from being scratched.  
Remove the battery, see "Removing a battery", Page 50.  
Fujitsu  
77  
 
Removing and installing components during servicing  
Remove the cover  
Prepare for removal, see "Preparing to remove components", Page 77.  
1
2
Remove the screw (1).  
Keep the screw in a safe place.  
Lift the cover off the notebook (2).  
78  
Fujitsu  
 
Removing and installing components during servicing  
Removing and installing memory expansion  
MSyaesimtn  
e
mo  
m
rey  
e
mrxepo  
m
ardyonu  
v
sleaion  
l
If you are asked by the Hotline/Service Desk to remove or install a memory  
expansion module yourself, proceed as follows:  
Please observe the safety information in chapter "Important notes", Page 14.  
During installation/removal of memory modules, the battery must remain  
removed from the notebook and the notebook must not be connected to the  
Only use memory modules that have been approved for use in your  
notebook (see chapter "Technical data", Page 97).  
Never use force when installing or removing a memory module.  
Make sure that no foreign objects fall into the memory upgrade compartment.  
You must open the memory upgrade compartment to remove or install a memory  
module. On some devices, it is possible that opening the compartment exposes various  
components. Only authorized specialists are permitted to remove or change these  
components. Therefore, be sure to observe the following:  
Individual components can become very hot during operation. Therefore, we  
recommend that you wait one hour after switching the notebook off before removing  
or installing memory modules. Otherwise, there is a risk of suffering burns!  
As some components are exposed that are sensitive to static electricity, please take  
Fujitsu  
79  
     
Removing and installing components during servicing  
Removing a memory module  
Fold over the protective film in the direction of the arrow.  
Carefully push the two mounting  
clips outwards (1).  
Memoryem  
x
o
p
d
anlseion  
u
The memory module will fold upwards (2).  
3
Pull the memory module out of its slot  
in the direction of the arrow (3).  
2
1
1
80  
Fujitsu  
     
Removing and installing components during servicing  
Installing a memory module  
Insert the memory module with the contacts  
and the recess (a) forward in the slot (1).  
Memoryem  
x
o
p
d
anlseion  
u
Carefully push the memory module  
downwards until you feel it click  
into place (2).  
2
1
a
Fold over the protective film in the direction of the arrow.  
Fasten the cover again, see "Attaching the cover", Page 84  
Fujitsu  
81  
     
Removing and installing components during servicing  
Installing and removing an M.2 module  
Removing the M.2 module  
2
Fold over the protective film in the direction of the arrow.  
1
2
Loosen the screw (1).  
Raise the M.2 module carefully upwards at the free side.  
82  
Fujitsu  
   
Removing and installing components during servicing  
Pull the M.2 module out of the slot on the mainboard in the direction of  
the arrow (2) and remove it from the casing.  
Fasten the cover again, see "Attaching the cover", Page 84  
Installing the M.2 module  
Remove the cover, see "Remove the cover", Page 78  
2
2
1
Position the M.2 module in the slot on the mainboard at a slight angle,  
in the direction of the arrow (1).  
Secure the M.2 module in its location with the screw (2).  
Fujitsu  
83  
 
Removing and installing components during servicing  
2
Fold over the protective film in the direction of the arrow.  
Attaching the cover  
2
1
Place the cover in the correct location (1).  
Tighten the screw (2).  
Complete the installation, see "Finishing component removal", Page 85.  
84  
Fujitsu  
 
Removing and installing components during servicing  
Finishing component removal  
After you have removed or changed the system components as required, please  
prepare your device for operation again as follows:  
Install the battery again, see "Installing a battery", Page 52.  
Turn the notebook the right way up again and place it on a flat surface.  
Reconnect the cables that were previously disconnected.  
Fujitsu  
85  
 
Settings in BIOS Setup Utility  
Settings in BIOS Setup Utility  
BSCeIyoOstn  
u
tSfi  
e
p
g
Sm  
u
e
srtiaeun  
t
tpgit  
o
i
Ushn  
n
yagt  
,
isrlsBidtt,eIyBwO  
m
Ia  
S
OrSe  
S
e
Stueptu tilitiylity  
U
p
U
The BIOS Setup Utility allows you to set the system functions and the hardware  
configuration for the notebook.  
When a notebook is delivered, the factory default settings are effective. You can change  
these settings in the menus of the BIOS Setup Utility. Any changes you make take  
effect as soon as you save and exit the BIOS Setup Utility.  
The BIOS Setup Utility program contains the following menus:  
Info  
Displays information relating to the BIOS, processor and notebook  
Advanced system settings  
System  
Advanced  
Configuration of various hardware components, such as mouse, keyboard,  
processor  
Security  
Boot  
Password settings and security functions  
Configuration of the start-up sequence  
Exits the BIOS Setup Utility  
Exit  
Starting the BIOS Setup Utility  
Reboot the device (switch off/on or reboot the operating system).  
BIOSSetupUtility  
Depending on the setting for Fast Boot in the BIOS-Setup-Utility, the following  
notification may appear on the screen during start-up:  
<F2> BIOS Setup <F12> Boot Menu  
F2  
Press the function key  
.
If a password has been assigned, enter the password and press the Enter key.  
If you have forgotten the password, contact your system administrator  
or contact our customer service center.  
The BIOS Setup Utility starts.  
86  
Fujitsu  
         
Settings in BIOS Setup Utility  
BIOS Setup Utility operation  
BIOSSetupUtility  
F1  
Press the  
key to display help about operation of the BIOS Setup Utility. The description  
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.  
F9  
With the  
key you can load the default settings of the BIOS Setup Utility.  
Use the cursor keys  
or  
to select the menu you wish to access to make changes.  
The menu is displayed on the screen.  
Select the option you want to change with the cursor keys  
Press the "Enter" key.  
or  
.
ESC  
Press the  
key to exit the selected menu.  
For future reference, make a note of the changes you have made (for example, in this manual).  
Fujitsu  
87  
   
Settings in BIOS Setup Utility  
Exiting BIOS Setup Utility  
BIOSSetupUtility  
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:  
Exit Saving Changes - save changes and exit BIOS Setup Utility  
To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.  
The notebook is rebooted and the new settings come into effect.  
Exit Discarding Changes - Reject changes and  
exit BIOS Setup Utility  
To discard the changes, select Exit Discarding Changes and Yes.  
The settings in place when BIOS Setup Utility was called remain effective. BIOS  
Setup Utility is terminated and the notebook is rebooted.  
Load Setup Defaults – load default values  
To copy the standard entries for all menus of the BIOS Setup Utility,  
choose Load Setup Defaults and Yes.  
Discard Changes - Discard Changes without  
exiting BIOS Setup Utility  
To discard the changes you have made, select Discard Changes and Yes.  
The settings in place when BIOS Setup Utility was called remain effective.  
You can now make additional settings in the BIOS Setup Utility.  
If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes.  
Save Changes - save changes without exiting  
the BIOS Setup Utility  
To save the changes, select Save Changes and Yes.  
The changes are saved. You can now make additional settings in the BIOS Setup Utility.  
If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.  
Save changes and power off  
To save the changes and switch off your device, select Save Changes and Power Off and Yes.  
The changes are saved. Your device is shut down.  
88  
Fujitsu  
               
Troubleshooting and tips  
Troubleshooting and tips  
TFPirar  
p
o
u
s
u
b
ltblele  
m
ssh  
o
o
l
ovtiin  
ng  
g
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:  
Make a note of the steps and the circumstances that led to the fault. Also  
make a note of any error messages displayed.  
Switch the notebook off.  
Please contact the Hotline/Service Desk.  
You can contact Fujitsu Service and Support in the following ways:  
Toll free phone: 1-800-8Fujitsu (1-800-838-5487)  
Before you place the call, have the following information ready so that the customer  
support representative can provide you with the fastest possible solution:  
The model name and serial number of the notebook. The serial number is  
located on a sticker on the underside of the notebook.  
Notes with the messages that appeared on the screen and  
information on acoustic signals.  
Any changes you have made to the hardware or software since  
receiving the notebook.  
Any changes you have made to the BIOS Setup settings after receiving the notebook.  
Your system configuration and all peripheral devices connected to your system.  
Your sales contract.  
Our notebooks have been designed primarily with mobile applications in mind.  
This means that considerable effort has been made to optimize components and  
equipment in terms of weight, space and energy requirements. Depending on the  
particular configuration you have purchased, it is possible that functionality may be  
slightly reduced compared to a desktop PC if you are running processor-intensive  
gaming software, e.g. games with intensive 3D graphics. Updating your hardware with  
drivers which have not been approved by Fujitsu may result in performance losses,  
data losses or malfunction of the equipment. A list of approved drivers and current  
BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"  
Help if problems occur  
Should you encounter a problem with your computer that you cannot resolve yourself:  
Note the ID number of your device. The ID number is found on the type rating  
plate on the back or underside of the casing.  
For further clarification of the problem, contact the Fujitsu Service Desk. When you do  
this, please have ready the ID number and serial number of your system.  
In the event you need to recover your system  
In the event you need to restore your original Factory Image, please refer to  
the appendix of this Operating Manual.  
Fujitsu  
89  
         
Troubleshooting and tips  
The notebook’s date or time is incorrect  
ITWDniamcrotenrnr  
g
e
o
d
c
t
t
act otoiemr/rteimctte  
t
Cause  
Troubleshooting  
Time and date are incorrect.  
With the BIOS-Setup-Utility, you can set the  
date and time in the Main menu.  
Date and time are still set incorrectly after  
switching on the notebook.  
Please contact your sales outlet or our  
hotline/service desk.  
Battery indicator does not illuminate  
Cause  
Troubleshooting  
The battery is not installed correctly.  
Switch the notebook off.  
Check whether the battery is installed  
correctly in its compartment.  
Switch the notebook on.  
Charge the battery.  
The battery is discharged.  
or  
Install a charged battery.  
or  
Connect the notebook to a AC outlet  
using the AC adapter.  
When certain characters are entered on the  
keyboard, only numerals are written  
Cause  
Troubleshooting  
Num  
button.  
The virtual number keys of your device are  
Press the  
The notebook’s LCD screen remains blank  
LBClaDnksLcrCDensceen  
Cause  
Troubleshooting  
Screen is switched off.  
Press a key or touch the Clickpad.  
External monitor or television set connected.  
Press the key for changing over the screen  
output, see "Hot keys", Page 43.  
90  
Fujitsu  
               
Troubleshooting and tips  
The LCD screen of the notebook is difficult to read  
LCDscreen  
Cause  
Troubleshooting  
Reflected glare  
Turn the notebook or alter the tilt of the LCD  
screen.  
Increase the brightness of the screen.  
The external monitor remains blank  
Monitor  
Cause  
Troubleshooting  
Monitor is switched off.  
Switch the external monitor on.  
Press any key to continue.  
Power saving has been activated (monitor is  
blank).  
Brightness is set to dark.  
Adjust the brightness of the monitor.  
Screen output is set to the notebook’s LCD  
screen  
Press the key for changing over the screen  
output, see "Hot keys", Page 43.  
The external monitor’s AC cable or data cable is  
not connected properly.  
Switch off the external monitor and the  
notebook.  
Check whether the AC cable is plugged  
properly into the external monitor and into  
the power outlet.  
Check whether the data cable is properly  
connected to the notebook and the external  
monitor (if it is plugged in with a connector).  
Switch on the external monitor and the  
notebook.  
The external monitor is blank or the image is unstable  
Monitor  
Cause  
Troubleshooting  
The wrong external monitor has been selected  
or the wrong screen resolution has been set for  
the application program.  
Terminate the application program under  
Alt F4  
. If the  
error persists after terminating the program,  
use the key for switching the screen output  
(see "Hot keys", Page 43), in order to switch  
to the LCD screen of the notebook.  
Windows by pressing  
+
Change the following setting:  
Set the screen resolution: Set the screen  
resolution as described in the documentation  
for your operating system.  
Select monitor: Select monitor 1 or 2 as  
described in the documentation for your  
operating system.  
Fujitsu  
91  
               
Troubleshooting and tips  
The cursor does not correctly follow the  
stylus movements  
Cause  
Troubleshooting  
Stylus incorrectly calibrated.  
Calibrate the stylus as shown under  
Hardware and Sound / Tablet PC Settings  
in the Control Panel, see "Adjusting the  
Stylus input not working  
Cause  
Troubleshooting  
Incorrect driver installed.  
If your device is one which can only be  
operated using the stylus, install the driver  
for the standard model.  
or  
If your device is one which can be  
operated using the stylus and by finger,  
install the driver for the "Dual Digitizer"  
model.  
The stylus is in power saving mode.  
Press gently on the tip of the stylus to  
reactivate the stylus.  
The stylus battery is completely discharged.  
Carefully insert the stylus in its slot on the  
notebook to charge the stylus battery.  
The notebook does not start after switching it on  
Nobok  
Cause  
Troubleshooting  
The battery is not installed correctly.  
Check whether the battery is installed  
correctly in its compartment.  
Switch the notebook on.  
Charge the battery.  
The battery is dead.  
or  
Insert a charged battery.  
or  
Connect the AC adapter to the notebook.  
The AC adapter is not connected properly.  
Check whether the AC adapter is properly  
connected to the notebook.  
Switch the notebook on.  
92  
Fujitsu  
       
Troubleshooting and tips  
The notebook stops working  
NEnodteinbgook  
Cause  
Troubleshooting  
The notebook is in energy saving mode.  
End energy saving mode.  
An application program has caused the  
malfunction.  
Close the application program or restart  
the notebook (by restarting the operating  
system or switching the device off and back  
on again).  
The battery is dead.  
Charge the battery.  
or  
Insert a charged battery.  
or  
Connect the AC adapter to the notebook.  
The printer does not print  
Prinedosntrint  
Cause  
Troubleshooting  
The printer is not switched on.  
Make sure that the printer is switched  
on and ready for operation (refer to the  
documentation supplied with the printer).  
The printer is not connected correctly.  
Check that the data cable connecting  
the notebook to the printer is properly  
connected.  
The printer driver is faulty or not correctly  
installed, or it is the wrong printer driver.  
Check whether the correct printer driver is  
loaded (refer to the printer documentation).  
The wireless connection to a network does not work  
Thewirlessconnectiontoanetworkdoesnotwork  
Cause  
Troubleshooting  
The wireless component is switched off.  
Switch the wireless component on (see  
The wireless component is switched on. Despite  
this, the wireless connection to a network does  
not work.  
Check whether the wireless connection is  
enabled by the software.  
Further information on using the wireless  
component can be found in the help files.  
Fujitsu  
93  
             
Troubleshooting and tips  
The battery discharges too quickly  
Battery  
Cause  
Troubleshooting  
The battery is either too hot or too cold. In this  
case the battery indicator flashes.  
Move the notebook so that its temperature  
returns to within the normal range.  
If the operating time of the battery life is  
extremely short, the battery is probably too  
old. Replace the battery if necessary.  
You may have an application running that  
consumes a great deal of power due to frequent  
accessing of the hard disk or optical drive.  
Use the AC adapter whenever possible.  
The maximum brightness may have been set  
for the screen.  
Set the screen slightly darker with the key  
for Decreasing the screen brightness in order to  
reduce the amount of power being drawn.  
Smart Card reader is not recognized  
Cause  
Troubleshooting  
Smart Card inserted incorrectly.  
Make sure you have inserted your Smart  
Card into the Smart Card reader with  
the chip facing upwards / downwards  
(device-dependent).  
Check whether the Smart Card you are  
using is supported. Your Smart Card must  
comply with the ISO standard 7816-1, -2,  
-3 and -4.  
Smart Card PIN forgotten  
Cause  
Troubleshooting  
PIN forgotten  
If you are working in a network, contact your  
system administrator, who can unlock your  
notebook with a Supervisor PIN.  
Smart Card lost  
Cause  
Troubleshooting  
Smart Card lost.  
If you are working in a network, contact your  
system administrator, who can boot your  
notebook with a Supervisor Smart Card.  
94  
Fujitsu  
         
Troubleshooting and tips  
User and/or supervisor SmartCard lost  
Cause  
Troubleshooting  
User and/or supervisor SmartCard lost  
If you have lost your user SmartCard, you  
can continue to work with the supervisor  
SmartCard.  
If you have lost the supervisor SmartCard,  
you can also continue working, but you no  
longer have all rights and cannot initialize  
another supervisor SmartCard.  
Acoustic warning  
croourstic warnings  
Cause  
Troubleshooting  
► Charge the battery.  
A beep sounds every few seconds.  
The battery is almost dead.  
Error messages on the screen  
Errorsmessagesonthescreen  
This section describes the error messages generated by the BIOS Setup. Error messages displayed  
by the operating system or programs are described in the documentation for these programs.  
If the error message appears repeatedly despite troubleshooting measures,  
contact the place of purchase or our customer service center.  
Error message/cause  
Troubleshooting  
CMOS Battery Bad  
Contact your sales outlet or our customer  
service center.  
If the error message occurs repeatedly, the  
back-up battery in the notebook is dead.  
System CMOS checksum bad - Default conguration  
used  
Switch the notebook off.  
Switch the notebook on.  
F2  
The system configuration information is  
incorrect.  
Press the function key  
to access the  
BIOS Setup.  
In the BIOS Setup, select the Exit menu.  
Select the entry Load Setup Defaults.  
Select OK and press the Enter key.  
Extended memory failed at offset: xxxx Failing Bits:  
zzzz zzzz  
Check whether the additional memory  
module has been inserted correctly.  
When testing the extended memory. an error  
has resulted at the address xxxx.  
Failure Fixed Disk n  
Start the BIOS Setup (Primary Master  
submenu) and select the correct settings.  
The settings of the hard disk drive are incorrect.  
Fujitsu  
95  
             
Troubleshooting and tips  
Error message/cause  
Troubleshooting  
Keyboard controller error  
Switch off the notebook with the ON/OFF  
switch.  
Wait 3 - 5 seconds and switch on the  
notebook again.  
Keyboard error  
If you use an external keyboard:  
Check the connection and reboot the  
notebook.  
nn Stuck key  
Make sure that no key is pressed.  
Operating system not found  
Check in the BIOS Setup whether your hard  
disk has been set correctly.  
Make sure that the operating system is  
installed on the corresponding drive.  
F1  
Press <F1> to resume, <F2> to SETUP  
Press the  
function key to start the  
operating system.  
This error message appears if an error occurs  
during the self-test before starting the operating  
system.  
F2  
Press the function key  
to access the  
BIOS Setup.  
F1  
function key when prompted  
Previous boot incomplete - Default conguration  
used Default values have been set for certain  
settings because of an error which occurred in  
the previous system boot. Check the settings in  
the BIOS Setup.  
Press the  
to do so.  
Real time clock error  
Contact your sales outlet or our customer  
service center.  
nnnnK Shadow RAM failed at offset: xxxx Failing  
Bits: zzzz  
Contact your sales outlet or our customer  
service center.  
System battery is dead - Replace and run SETUP  
System cache error - Cache disabled  
System timer error  
Contact your sales outlet or our customer  
service center.  
Contact your sales outlet or our customer  
service center.  
Contact your sales outlet or our customer  
service center.  
96  
Fujitsu  
Technical data  
Technical data  
Notebook  
General  
Processor  
7th Generation Intel® Corewith ULT processors  
Intel® Corei7-7600U processor (4 MB cache,  
up to 3.9 GHz)  
Intel® Corei7-7500U processor (4 MB cache,  
up to 3.5 GHz)  
Intel® Corei5-7300U processor (3 MB cache,  
up to 3.5 GHz)  
Intel® Corei5-7200U processor (3 MB cache,  
up to 3.1 GHz)  
Intel® Corei3-7100U processor (3 MB cache,  
up to 2.4 GHz)  
Intel® Celeron® 3965U processor (2MB cache,  
up to 2.20 GHz)  
Optional Intel® CorevProprocessor  
Maximum 16 GB DDR4  
Main memory (SO DIMM)  
1 slot for 4, 8 or 16 GB modules  
Electrical data  
Safety regulations complied with  
Protection class  
CE, cULus  
III  
Maximum power consumption (with the  
65 W (without USB Type-C dock) / 90 W (with  
notebook switched on and the battery charging): USB Type-C dock)  
LCD screen  
Size  
31.75 cm / 12.5" TFT FHD or HD (configuration  
dependent)  
Resolution  
HD: 1366 x 768 pixels  
FHD: 1920 x 1080 pixels  
16M colors  
II  
Pixel class  
Brightness control  
Technology  
11 levels  
Wide-View High-Bright Display with LED  
background lighting  
Digitizer and glass panel  
Dual Digitizer / Touch and Pen support  
Hardened glass  
Webcam  
HD (720p) with status indicator and two  
microphones  
Display adapter  
Fujitsu  
97  
   
Technical data  
Chip  
Intel® HD Graphics 620  
HDMI: 4096 x 2160 pixels  
Maximum resolution of external monitor:  
Dimensions  
Width x Depth x Height  
from  
11.77 inch x 8.23 inch x 0.74 inch  
299 x 209 x 18,8 mm  
from  
Weight depending on configuration  
2.84 lbs  
1.29 kg  
Input devices  
Keyboard  
high-quality, splashproof and antimicrobial  
keyboard with 84 keys, optional backlit  
Touchpad  
Touchpad cursor control pad with right and left  
command button, supports: Capacitive Touch,  
external USB keyboard, Wacom AES stylus and  
mouse  
Stylus  
2 stylus buttons  
Slots  
Storage card slot  
SmartCard slot  
Ports  
1 x SD Card  
1 x  
HDMI port  
1 x  
VGA port  
1 x  
LAN port  
Socket, RJ45  
USB (Universal Serial Bus)  
1 x Type-C USB 3.1 Gen 1 port, 2 x Type-A USB  
3.0 ports (1 x Anytime USB Charge)  
Security Lock  
1 x  
Ambient conditions  
Environment class DIN IEC 721  
Mechanism class DIN IEC 721  
Operating temperature  
7K1  
7M2  
41°F .... 95 °F  
5 °C .... 35 °C  
5°F .... 140 °F  
Transit temperature (2K2)  
–15 °C .... 60 °C  
Windows 10 S configurations: You can connect a headphone. However,  
microphone, Line-In and Line-Out are not supported.  
The data sheet for the device provides further technical data. You can find the data  
sheet on your device or you can download it from the Internet at "www.fujitsu.com/us" .  
98  
Fujitsu  
Technical data  
WLAN specifications  
Type of network  
Intel® Dual Band Wireless-AC 8265  
11a/b/g/n/11ac), Wi-Fi based*  
Transfer rate  
(Automatic switching) IEEE802.11 a and g: 54  
Mbps max. data rate; IEEE802.11n: 300 Mbps  
max. data rate, IEEE802.11ac: 867 Mbps max.  
data rate  
Active frequency  
802.11n: 2.4 GHz or 5 GHz  
802.11b/g: 2400~2473 MHz  
802.11a: 4900~5850 MHz  
802.11a: 2.4 GHz / 5 GHz  
Typical operating distances**  
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.  
(91 m) @ 6 Mbps  
802.11ac: 40 ft. (12 m) @ 54 Mbps; 300  
ft.(91 m) @ 6 Mbps  
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.  
(91 m) @ 1 Mbps  
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.  
(91 m) @ 1 Mbps  
802.11n: Estimated double the operating  
distance of 802.11g and 802.11a in their  
respective frequencies  
Number of channels  
802.11a: 8 independent channels  
802.11b/g: 11 channels, 3 non-overlapping  
channels  
802.11n: Channel bonding takes two of  
the non-overlapping 20MHz channels and  
combines it into one 40MHz channel. It is  
actually 12 non-overlapping channels with  
channel bonding and 24 without. Also it is 1  
non-overlapping channel in 2.4GHz when  
channel bonding is used.  
802.11ac: 5 independent channels  
Security  
Encryption types: compatible with WEP, TKIP,  
AES***, WPA 1.0 and WPA 2.0  
Encryption key, lengths supported: 64 bits and  
128 bits  
Fujitsu  
99  
 
Technical data  
Maximum recommended number of computers 10 units or less ****  
to be connected over wireless LAN (during ad  
hoc connection)  
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the  
interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.  
** The operating distances given above increase or decrease depending on factors such as the  
number of walls, reflecting material or interference by external RF sources.  
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of  
the fixed length of 24 bits the user may however also set 40 or 104 bits.  
**** Depending on the particular practical application, the number of computers which can be  
networked is reduced if necessary.  
USB Type-C dock (optional)  
Electrical data  
Safety regulations complied with  
Ports  
UL  
Monitor port (analog)  
HDMI port  
15-pin  
1 x  
Display Port  
1 x  
Maximum resolution of an external monitor  
VGA: 1920 x 1200 pixels  
Display Port: 2560 x 1600 pixels  
HDMI: 4096 x 2160 pixels  
RJ45  
LAN port  
USB (Universal Serial Bus)  
3 x USB 3.0 Type-A, 2 x USB 3.1 Gen 1 Type-C  
3.5 mm stereo mini jack  
Microphone port / Line In / Headphones port /  
Line Out  
Ambient conditions  
Environment class DIN IEC 721  
Mechanism class DIN IEC 721  
Operating temperature  
7K1  
7M2  
41 °F .... 95 °F  
5 .... 35 ℃  
Transit temperature  
5 °F .... 140 °F  
–15 °C .... 60 °C  
Windows 10 S configurations: You can connect a headphone. However,  
microphone, Line-In and Line-Out are not supported.  
100  
Fujitsu  
 
Technical data  
Rechargeable battery  
For information on the batteries used in your device, please see  
Rated voltage  
10.8 V  
Rated capacity  
Rated power  
45 Wh  
4170 mAh  
The operating time depends on the device configuration, the active  
applications and the energy saving settings.  
AC adapter for use with notebook and  
USB Type-C dock  
Only connect the 90 W AC adapter to the USB Type-C dock.  
The following technical data applies to the AC adapter included in the delivery scope of  
the notebook and the USB Type-C dock which is can be ordered as an option.  
Primary  
Rated voltage  
Rated frequency  
Secondary  
100 V to 240 V (automatic)  
50 Hz to 60 Hz (automatic)  
Rated power  
65 W / 90 W  
19 V  
Rated voltage  
Max. rated current  
3.42 A / 4.74 A  
An additional AC adapter or AC cable can be ordered at any time.  
Fujitsu  
101  
   
Manufacturer’s notes  
Manufacturer’s notes  
Disposal and recycling  
Notes  
You can find information on this subject on your notebook or on our website  
Recycling your battery  
Over time, the batteries that run your mobile computer will begin to hold a charge for a  
shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you  
may want to replace the battery with a brand new one*. If you replace it, it is important  
that you dispose of the old battery properly because batteries contain materials that  
could cause environmental damage if disposed of improperly.  
Fujitsu is very concerned with environmental protection, and has enlisted the services of the  
Rechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organization  
dedicated to protecting our environment by recycling old batteries at no cost to you.  
RBRC has drop-off points at many convenient locations throughout the United States and Canada.  
To nd the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.  
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer  
Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location.  
Remember – protecting the environment is a cooperative effort, and you should  
make every effort to protect it for current and future generations.  
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site  
at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.  
** RBRC is an independent third party to which Fujitsu provides funding for  
battery recycling; RBRC is in no way affiliated with Fujitsu.  
DOC (Industry CANADA) Notices  
DOC(INDUSTRYCANADA)NOTICES  
Radios and Television  
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment  
Regulations.  
CET appareil numérique de la class B respecte toutes les exigence du Réglement  
sur le matérial brouilleur du Canada.  
102  
Fujitsu  
           
Manufacturer’s notes  
UL Notice  
IMPORTANT SAFETY INSTRUCTIONS  
This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating  
of 19 VDC, with a minimum current of 3.42A (65W). The correct output rating is indicated on the  
AC adapter label. Refer to the illustration below for the correct AC adapter output polarity:  
When using your notebook equipment, basic safety precautions should always be followed to  
reduce the risk of fire, electric shock and injury to persons, including the following:  
Do not use this product near water for example, near a bathtub, washbowl, kitchen  
sink or laundry tub, in a wet basement or near a swimming pool.  
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a  
fire. They may explode. Check with local codes for possible special disposal instructions.  
SAVE THESE INSTRUCTIONS  
For Authorized Repair Technicians Only  
CAUTION:  
For continued protection against risk of fire, replace only with the  
same type and rating fuse.  
WARNING:  
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only  
with the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the manufacturer’s instruction.  
Fujitsu  
103  
 
Manufacturer’s notes  
ENERGY STAR Compliance  
Your Fujitsu system is an ENERGY STAR qualified mobile PC. By  
choosing a computer with the latest energy-saving technology, you’re  
helping to preserve our environment for future generations. ENERGY  
STAR is a joint program of the U.S. Environmental Protection Agency,  
U.S. Department of Energy, Natural Resources Canada, and other  
governments around the world helping us save money while protecting  
the environment through energy efficient products and practices. With  
energy costs and global warming top-of-mind for consumers, Fujitsu is  
committed to offering solutions that help consumers conserve energy  
and improve the quality of our environment.  
Sleep mode:  
You will notice that your computer is initially set so that the display turns off after 10 minutes of  
user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When  
going into Sleep mode, the computer also reduces the speed of any active Ethernet network  
links. To wake” the computer from Sleep mode, press the Suspend/Resume Button.  
Energy saving benefits:  
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard  
equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference  
for the environment. Did you know that the average house can be responsible for twice the  
greenhouse gas emissions as the average car? That’s because every time you flip on a light  
switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse  
gas emissions from power plants. So the more energy we can save through energy efficiency,  
the more we help to reduce greenhouse gases and the risks of global warming.  
To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".  
To read about how Fujitsu is supporting Sustainable Management along with  
several other environmental activities, visit the Fujitsu Corporate Citizenship page at:  
104  
Fujitsu  
 
FCC and IC Regulatory Information  
FCC and IC Regulatory Information  
Please note the following regulatory information related to the wireless LAN  
device.  
Regulatory Notes and Statements  
Wireless LAN, Health and Authorization for use  
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of  
these emissions, however, are far much less than the electromagnetic energy emissions from wireless  
devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they  
operate within the guidelines found in radio frequency safety standards and recommendations. The  
use of Wireless LAN devices may be restricted in some situations or environments, such as:  
On board an airplane, or  
In an explosive environment, or  
In situations where the interference risk to other devices or services is  
perceived or identied as harmful.  
In cases in which the policy regarding use of Wireless LAN devices in specic environments is  
not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain  
authorization to use these devices prior to operating the equipment.  
Regulatory Information/Disclaimers  
Installation and use of this Wireless LAN device must be in strict accordance with the instructions  
included in the user documentation provided with the product. Any changes or modications made  
to this device that are not expressly approved by the manufacturer may void the user’s authority to  
operate the equipment. The manufacturer is not responsible for any radio or television interference  
caused by unauthorized modication of this device, or the substitution or attachment of connecting  
cables and equipment other than those specied by the manufacturer. It is the responsibility of the  
user to correct any interference caused by such unauthorized modication, substitution or attachment.  
The manufacturer and its authorized resellers or distributors will assume no liability for any damage  
or violation of government regulations arising from failure to comply with these guidelines.  
This device must not be co-located or operated in conjunction with any other antenna or transmitter.  
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is  
restricted to indoor environments, and the antenna of this device must be integral.  
105  
Fujitsu  
     
FCC and IC Regulatory Information  
Federal Communications Commission and Industry  
Canada statement:  
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).  
Operation is subject to the following two conditions: (1) This device may not cause  
interference, and, (2) This device must accept any interference, including interference  
that may cause undesired operation of this device.  
Déclaration d’Industrie Canada  
Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)  
RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement  
est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence  
nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles  
pouvan t causer un mauvais fonctionnement de l’appareil.  
FCC Interference Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy. If not installed and used in accordance with  
the instructions, it may cause harmful interference to radio communications. However, there  
is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try and  
correct the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the distance between the equipment and the receiver.  
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.  
4. Consult the dealer or an experienced radio/TV technician for help.  
106  
Fujitsu  
     
FCC and IC Regulatory Information  
FCC Radio Frequency Exposure statement  
The available scientic evidence does not show that any health problems are associated with  
using low power wireless devices. There is no proof, however, that these low power wireless  
devices are absolutely safe. Low power wireless devices emit low levels of radio frequency  
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce  
health effects (by heating tissue), exposure to low-level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low-level RF exposure have  
not found any biological effects. Some studies have suggested that some biological effects  
might occur, but such ndings have not been conrmed by additional research.  
The wireless LAN radio device has been tested and found to comply with FCC radiation  
exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency  
(RF) Exposure Guidelines in Supplement C to OET65.  
The exposure standard for wireless devices employs a unit of measurement known as the Specic  
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.  
This device is compliant with SAR for general population /uncontrolled exposure limits in  
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with  
the measurement methods and procedures specied in OET Bulletin 65 Supplement C,  
and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure  
guidelines when tested with the device operating conditions.  
Déclaration de la FCC/d’Industrie Canada sur  
l’exposition aux radiofréquences  
La norme régissant l’exposition des appareils sans l aux radiofréquences emploie une unité  
de mesure dénommée Taux d’absorption spécique, ou TAS. La FCC et Industrie Canada ont  
ni la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites  
d’exposition générales de la population/non contrôlées dénies par les règles C95.1-1992 de  
l’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodes  
et procédures de mesure spéciées dans le supplément C du bulletin 65 de l’OET (Ofce  
d’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testé  
selon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révélé  
conforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.  
Export restrictions  
This product or software contains encryption code which may not be exported or transferred  
from the US or Canada without an approved US Department of Commerce export license.  
This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference  
that may cause undesirable operation. Modications not expressly authorized by Fujitsu  
America, Inc. may invalidate the user’s right to operate this equipment.  
107  
Fujitsu  
     
FCC and IC Regulatory Information  
Restrictions concernant l’exportation  
Ce produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré du  
Canada ou des États-Unis sans un permis d’exportation du département du commerce des  
États-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à la  
norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes  
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter  
toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement  
de l’appareil. Toute modication n’ayant pas été expressément approuvée par la société Fujitsu  
America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.  
Canadian Notice  
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential  
for harmful interference to co-channel mobile satellite systems.  
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725  
MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.  
In addition, users are cautioned to take note that high power radars are allocated as primary  
users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these  
radars could cause interference and/or damage to LE-LAN devices.  
Avis pour le Canada  
Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé  
uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux  
systèmes mobiles par satellite fonctionnant sur un même canal.  
Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250  
- 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite  
p.i.r.e. maximale permise afférent aux périphériques RSS-247.  
En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance  
sont considérés comme des utilisateurs principaux (ce qui signifie qu’ils sont prioritaires) des  
bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences  
et/ou des dommages aux appareils de réseau exempts de licence.  
108  
Fujitsu  
   
Appendix  
Appendix  
Before Using the Optional Wireless LAN  
This manual describes the procedures required to properly set up and configure the optional  
integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the  
manual). Before using the WLAN device, read this manual carefully to ensure its correct  
operation. Keep this manual in a safe place for future reference.  
Wireless LAN Devices Covered by this Document  
This document is applicable to systems containing the following device:  
Intel® Dual Band Wireless-AC 8265 – 11a/b/g/n/11ac  
Characteristics of the WLAN Device  
The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.  
The WLAN devices operate in license-free RF bands, eliminating the need to procure  
an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,  
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz  
Unlicensed National Information Infrastructure (UNII) bands.  
The WLAN device is Wi-Fi certified and operates (as applicable) at the maximum data rate  
of 867 Mbps in IEEE802.11ac mode, 450 Mbps in IEEE802.11n mode (300 Mbps in this  
configuration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.  
The WLAN devices support the following encryption methods - WEP,  
TKIP, CKIP, and AES encryption.  
The Wireless LAN devices are compliant with the following standards: WPA,  
WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.  
Wireless LAN Modes Using this Device  
Ad Hoc Mode  
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity  
between multiple computers is established without a central wireless network device, typically  
known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer  
fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc  
networks are an easy and inexpensive method for establishing network connectivity between  
multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption  
key settings are identically configured on all computers in the Ad Hoc network.  
109  
Fujitsu  
         
Appendix  
Access Point (Infrastructure) Mode  
Infrastructure mode refers to a wireless network architecture in which devices communicate with  
wireless or wired network devices by communicating through an Access Point. In infrastructure  
mode, wireless devices can communicate with each other or with a wired network. Corporate  
wireless networks operate in infrastructure mode because they require access to the WLAN in  
order to access services, devices, and computers (e.g., file servers, printers, databases).  
Fujitsu  
110  
Appendix  
**  
*
*
= An optional hub for a wired LAN may  
be required depending upon the type  
of access point used.  
** = ADSL modem, cable modem, or similar  
How to Handle This Device  
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under  
normal circumstances, it should not be necessary for you to remove or re-install it. The Operating  
System that your mobile computer comes with has been pre-configured to support the WLAN device.  
Integrated Intel Centrino wireless LAN devices support, optional Intel® Dual Band  
Wireless-AC 8265 (802.11 ac/a/b/g/n) with Bluetooth Wireless v 4.1  
The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz  
lower, middle, and upper UNII bands.  
Microwave ovens may interfere with the operation of WLAN devices since they operate in the  
same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves  
does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.  
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN  
devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,  
intermittent disconnects, and many frame errors. It is HIGHLY recommended that these  
interfering devices be powered off to ensure proper operation of the WLAN device.  
Fujitsu  
111  
Appendix  
Deactivating/Disconnecting the WLAN Device  
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery  
life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The  
WLAN device can be disconnected in Windows using the WLAN icon in the system tray  
(Note that disconnecting via the icon in the system tray does not turn off the radio; it  
continues to transmit and receive even though it’s not connected.)  
F5  
Press the key  
to deactivate the Wireless Device  
WBluiretloeossthLAN  
The wireless component indicator will go off when the wireless components are switched off.  
Configuring the Wireless LAN  
The optional WLAN device can be configured to establish wireless network connectivity  
using the software that is built into Windows. Support for most industry standard  
security solutions is contained in this software.  
Pre-defined parameters will be required for this procedure. Please consult with  
your network administrator for these parameters:  
Configuring the WLAN Using Windows  
The WLAN device can be configured to establish wireless network connectivity using  
the software that is built into Windows Vista. Support for most industry standard  
security solutions is contained in this software.  
Pre-defined parameters are required for this procedure. Consult your network  
administrator for these parameters:  
Windows  
X
1. From the Modern Start screen, press  
+
, then select Control Panel from the menu.  
2. If the Control Panel is not in Classic View, select Classic View from the left panel.  
Double-click the Network and Sharing Center icon.  
3. Select Setup a new connection or network.  
4. Depending upon what type of connection you would like to make, make a selection. For  
an infrastructure network, select Manually connect to a wireless network.  
5. Enter the required information. It may be necessary to consult with your network  
administrator for some of the information.  
6. In the event you require assistance, go to the Network and Sharing Center window (Control  
Panel > Network and Sharing Center), and type in relevant keywords in the Search box.  
Connection to the network  
After you have configured your computer, you can connect to an active network  
by performing the following steps:  
1. Click on the WLAN icon in the system tray.  
2. Select Connect to a network.  
3. Select a network from the list that appears, and click the Connect button.  
Fujitsu  
112  
         
Appendix  
Troubleshooting the WLAN  
Causes and countermeasures for troubles you may encounter while using your  
wireless LAN are described in the following table.  
Problem  
Possible Cause  
Possible Solution  
Unavailable network connection Incorrect network name (SSID) Ad hoc connection: verify that  
or network key  
the network names (SSID’s)  
and network keys (WEP) of  
all computers to be connected  
have been configured correctly.  
SSID’s and WEP key values  
must be identical on each  
machine.  
Access Point (Infrastructure)  
connection: set the network  
name (SSID) and network key  
to the same values as those of  
the access point.  
Set the Network Authentication  
value identically to that of the  
Access Point. Please consult  
your network administrator for  
this value, if necessary.  
Weak received signal strength Ad hoc connection: Retry  
and/or link quality  
connection after shortening  
the distance to the destination  
computer or removing any  
obstacles for better sight.  
Access Point (Infrastructure)  
connection: Retry connection  
after shortening the distance to  
the access point or removing  
any obstacles for better sight.  
113  
Fujitsu  
 
Appendix  
Problem  
Possible Cause  
Possible Solution  
Unavailable network connection The WLAN device was  
Check if the wireless switch  
is turned On. Go to Start >  
Control Panel, and doubleclick  
on Windows Mobility Center. If  
the wireless network is off, click  
the Turn wireless on button.  
(continued)  
deactivated or is disabled  
The computer to be connected Check if the computer to be  
is turned off  
connected is turned ON.  
Incorrectly configured network Recheck the configuration of  
settings  
your network settings.  
RF interference from Access  
Points or other wireless  
networks  
The use of identical or  
overlapping RF channels can  
cause interference with the  
operation of the WLAN device.  
Change the channel of your  
Access Point to a channel  
that does not overlap with the  
interfering device.  
Wireless network authentication Re-check your Network  
has failed  
Authentication, Encryption,  
and Security settings.  
Incorrectly configured  
security settings such as  
an incorrectly typed WEP  
key, a mis-configured LEAP  
username, or an incorrectly  
chosen authentication method  
will cause the LAN device to  
associate but not authenticate  
to the wireless network.  
Incorrect IP address  
configuration  
This only applies to networks  
using static IP addresses.  
Please contact your network  
administrator for the correct  
settings.  
114  
Fujitsu  
Appendix  
Using the Bluetooth Device  
Bluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are Bluetooth  
Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.  
What is Bluetooth  
Bluetooth technology is designed as a short-range wireless link between mobile devices, such  
as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create  
Personal Area Networks (PANs) between devices in short-range of each other.  
Proceed as follows to individually enable or disable wireless LAN or Bluetooth devices:  
F5  
1. Switch on the WLAN/Bluetooth via the key  
.
2. In the screen Modern Start, select the option Charms > Settings  
> Change PC Settings > Wireless.  
3. Under Wireless > Wireless Devices, click on the switch Bluetooth to switch on Bluetooth.  
Where to Find Information About Bluetooth  
For additional information about Bluetooth Technology, visit the Bluetooth  
Web site at: "www.bluetooth.com".  
FCC Radiation Exposure Statement  
This system complies with the FCC limit values for radio frequency radiation in an uncontrolled  
environment. The Bluetooth antenna is located at the top edge of the LCD screen and is exempt  
from the criteria for minimum distance because of its low power consumption.  
The transmitter used in this system must not be operated together with other antennas or transmitters.  
Canadian Notice  
To prevent radio interference to licensed services, this system is designed for use in indoor spaces  
/ in buildings and not directly at window openings, to allow a maximum shielding.  
Warranty  
Users are not authorized to modify this product. Any modifications invalidate the warranty.  
This equipment may not be modified, altered, or changed in any way without signed  
written permission from Fujitsu. Unauthorized modification will void the equipment  
authorization from the FCC and Industry Canada and the warranty.  
Fujitsu  
115  
Appendix  
Image Backup and Recovery Procedures  
Windows 10 Procedures  
It is very important that you create your Recovery Drive before beginning to use your system.  
It is also important that you create a backup of the content of the C:\Drivers folder on  
your system to writable media or an external drive. System-specific software drivers  
are also available for download through the Fujitsu support site.  
In Windows 10 S configurations, go to C:\Windows\System32\DriverStore.  
Note: Most of the information below comes from the Microsoft® page  
Please refer to it for more details.  
Creating a recovery drive  
A recovery drive can help you troubleshoot and fix problems with your PC, even if it  
won’t start. To create one, all you need is a USB flash drive. Windows will inform you  
of the size the USB flash drive needed to hold the required data.  
1. From the taskbar, search for Create a recovery drive and then select it. You may be  
asked to enter an administrator password or confirm your selection.  
2. When the tool opens, make sure Backup system les to the recovery drive  
is selected and then select Next.  
3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of  
files need to be copied to the recovery drive, so this could take some time.  
4. When it’s done, select Finish.  
Note:  
If you chose not to back up the system files when you created your recovery drive on  
Windows 10, you won’t be able to use it to reinstall Windows.  
Recovery options in Windows 10  
If your PC isn’t running as quickly or reliably as it used to, try one of these recovery  
options. The following table can help you decide which one to use.  
Problem  
Try this  
Your PC isn’t working well and you recently  
installed an app, driver, or update.  
Restore from a system restore point  
Your PC isn’t working well and it’s been a while Reset your PC  
since you installed anything new.  
Fujitsu  
116  
   
Appendix  
Problem  
Try this  
Your PC won’t start and you’ve created a  
recovery drive.  
Use a recovery drive to reinstall Windows  
Your PC won’t start and you haven’t created a  
recovery drive.  
Use installation media to reinstall Windows.  
Note: Installed media not available in Windows  
10 S configurations.  
Restore from a system restore point  
This option takes your PC back to an earlier point in time, called a system restore point. Restore  
points are generated when you install a new app, driver, or Windows update, and when you  
create a restore point manually. Restoring won’t affect your personal files, but it will remove  
apps, drivers, and updates installed after the restore point was made.  
Windows® 10 Pro, Home configurations:  
1. Right-click (or press and hold) the Start button, and then select Control Panel.  
2. Search Control Panel for Recovery.  
3. Select Recovery - Open System Restore - Next.  
4. Choose the restore point related to the problematic app, driver, or update,  
and then select Next - Finish.  
Windows 10 S configurations:  
1. Navigate to Settings.  
2. Select Update & security.  
3. In the left pane click Recovery.  
4. Under Reset this PC click Get started.  
5. Depending on whether you want to keep your data files intact, select either  
Keep my les or Remove everything.  
Note: If you don’t see any restore points, it could be because the system protection isn’t turned  
on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Congure  
System Restore - Congure and make sure that Turn On System Protection is selected.  
Reset your PC  
Resetting lets you choose whether to keep your files or remove them, and then reinstalls Windows.  
To get started, go to Settings - Update & security - Reset this PC - Get started and choose an option.  
117  
Fujitsu  
Appendix  
Option  
What it does  
Keep my files  
The following apps are removed after you reset your PC:  
Anytime USB Charge Utility  
Battery Change Utility  
Battery Utility  
FUJ02E3 Device Utility  
Function Manager - CPU performance  
LIFEBOOK Application Panel  
Mic Mute Utility  
Pen Low Battery Notification  
Pointing Device Utility for P728  
These apps can be installed from the Windows Store. The web links  
can be found at C:\Fujitsu Extras\Support\Softwares  
Remove everything  
This reinstalls Windows 10 and any apps that came with your PC.  
It removes:  
Personal files  
Changes you made to settings  
Apps and drivers you installed  
If you’re planning to donate, recycle, or sell your PC, use this option  
and choose to fully clean the drive. This might take an hour or  
two, but it makes it harder for other people to recover files you’ve  
removed.  
You may need to reinstall some of the applications that came with your PC. Go to the  
Windows Store by clicking the web shortcuts stored in C:\Fujitsu Extras\Support\Softwares,  
the hyperlinks below or by visiting "http://www.fujitsu.com/us/support/".  
App  
Link  
Battery Change Utility  
Battery Utility  
FUJ02E3 Device Utility  
Function Manager  
Function Manager (CPU  
performance)  
LIFEBOOK Application  
Panel  
Mic Mute Utility  
Pointing Device Utility for  
P728  
Fujitsu  
118  
Appendix  
Use a recovery drive to reinstall Windows (not available for Windows 10 S)  
Note: This process utilizes the USB Recovery Drive that you created in the  
previous section "Create a Recovery Drive".  
1. Connect the recovery drive and turn on your PC.  
2. On the Choose an option screen, select Troubleshoot - Reset this PC, and then  
choose the reset option that’s best for you.  
If that doesn’t fix the problem, try Troubleshoot - Recover from a drive. This will remove your personal  
files, apps and drivers you installed, and changes you made to settings. If you repartitioned the  
drive Windows is installed on, note that this will restore the drive’s default partitions.  
Use installation media to reinstall Windows (not available for Windows 10 S)  
If you have installation media, like a Recovery DVD that you purchased from  
Fujitsu, you can use it to reinstall Windows. You will need to install additional  
drivers and applications after reinstalling Windows.  
To reinstall Windows, follow the steps below:  
F12  
1. Power on your system. When the Fujitsu logo appears on the screen, press the  
2. Insert the bootable disc in your DVD drive.  
key.  
Enter  
3. Highlight the CD/DVD option from the Boot Menu and press  
4. Follow the on-screen instructions to restore the image.  
.
Select the language.  
At the Windows Setup dialog window, enter your OS, language and other  
preferences and click Next to continue.  
Click Install now to proceed with reinstalling Windows.  
At License terms, check on I accept the license terms and click Next.  
At Which type of installation do you want, click on Custom: Install Windows only (advanced).  
Delete all partitions on the drive and click Next. Installation of Windows will start. This will  
take some time so please wait until the installation is finished and the system restarts.  
5. When the system restarts, perform all set-up steps to arrive at the Desktop.  
6. Connect to the Internet.  
7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and  
applications to your system. If it is not available, download the software from the  
Fujitsu Support Site, as described below in the "Auto Installation support for the  
software downloaded from support website" section below.  
Installation of essential access software (not available for Windows 10 S)  
1. Insert the bootable disc in your DVD drive.  
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers  
folder in the bootable disc, the computer does not need the essential access software.  
The recovery image already has the essential access software installed.  
3. You can now connect to the internet and download FSDM (Fujitsu Software Download  
Manager) from the support site and download all the software applicable to the  
model and OS using FSDM if they are not downloaded yet.  
Fujitsu  
119  
Appendix  
Auto Installation support for the software downloaded from support website  
(not available for Windows 10 S)  
For Windows 10 S configurations, Auto Installation is not supported. Also, for  
Windows 10 S, software may not be uploaded to the support site. Users with  
factory image is expected to get software from the Windows Store.  
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all  
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.  
2. When the software packages are downloaded from the web, it is important to  
download the Auto Installer Software package and the model/language-specific  
Readme file if you prefer to auto install the software.  
3. It is important to have the extracted Auto Installer software package folder and  
Readme file in the same location as the other software folders. Otherwise  
auto-installation of the software will not be supported.  
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.  
5. Click Yes on the User Account Control dialog box. This will take some time to  
process the software packages. A message will be displayed during this time  
stating Please wait while the content is being processed.  
6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.  
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability  
to auto install the software downloaded from the support site.  
8. It is recommended that you install all the software in the listed order. You can  
Select All, to install the software in the order listed.  
9. Click the Install button to start the installation.  
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.  
11. You must restart the system for the settings to take effect. Do you wish to reboot  
now? message appears. Select Yes.  
12. The system will now reboot.  
Downloading driver updates  
This section: In Windows 10 S configurations, driver updates might currently not  
be uploaded to support site. User with factory image is expected to get driver  
updates via Windows Update and applications from Windows Store.  
To ensure that you always have the most current driver updates related to your system,  
you should occasionally access the Fujitsu Software Download Manager (FSDM) utility.  
The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view  
and download the most current drivers, utilities and applications to determine whether  
you have the latest versions. To download the FSDM utility, go to the support site:  
Fujitsu  
120  
 
Index  
Index  
A
B
D
E
Bluetooth  
switching module off 56, 113  
switching module on 56, 113  
F
C
Fujitsu  
121  
 
Index  
G
H
I
N
K
L
Num Lock  
indicator 26, 47  
O
M
P
122  
Fujitsu  
Index  
T
Touchpad 39, 43  
Power-on indicator 25, 28  
R
S
U
V
W
Fujitsu  
123  
Index  
switching module off 56, 113  
switching module on 56, 113  
124  
Fujitsu  

Whirlpool Acm184xe1 User Manual
Samsung Aw12a6 A7 Jd User Manual
Ricoh Aficio 1515 User Manual
NEC NP52 User Manual
Mitsubishi Mn Converter User Manual
LG LH W7636 User Manual
LG AP C1AV65 User Manual
KENWOOD MULTIONE KHH30 03 User Manual
KENWOOD JMP80 02 User Manual
ACER ASPIRE V7 581 User Manual