EPSON BRIGHTLINK 475WI 02 User Manual

BrightLink 475Wi/480i/485Wi  
Connection Guide  
BrightLink® interactive projectors provide many options for connecting computers,  
document cameras, video devices, and more. BrightLink users can also annotate without  
connecting a computer or any other device to the projector.  
This guide helps you connect the projector for maximum functionality and ease of use.  
After the projector has been installed on the wall or mounted on a table, follow the  
instructions in this guide to connect the equipment that will be used with the projector. You  
may need to consult with the school’s tech coordinator or IT director (or with the classroom  
teacher) on what equipment to use and which connections they prefer for various devices.  
The following illustration shows the projector’s interface panel and available ports.  
Connecting Computers  
You can use any of the following ports to connect computers to the projector:  
Computer1 or Computer2 (VGA connections)  
HDMI  
USB-B (USB display, not recommended because of reduced interactive performance)  
LAN (RJ-45)  
VGA connection  
HDMI connection  
LAN connection  
USB connection required (in addition to other  
connections) for full interactivity and dual pen support  
1
The built-in toolbar will be available on equipment connected to the other (non-selected)  
sources, providing PC-free annotation (single-pen support). Use the remote control to  
switch sources.  
Connecting Through a Network  
If both the projector and computer are connected to the same network by Ethernet®  
cable, users can project through the network. You must install the EasyMP Network  
Projection software on the computer (Windows® or Mac®). This software is available on  
the EPSON Projector Software CD that came with the projector or at  
epson.com/brightlinkdownloads.  
For full computer interactivity (using Easy Interactive Tools software), you also need to  
connect a USB cable from the computer to the projector and select LAN as the source, as  
If your network includes a wireless router, users can connect to the projector wirelessly from  
computers (using EasyMP Network Projection software). Users can also connect wirelessly  
from an iPad®, iPhone®, or iPod® touch using the optional EPSON iProjectionapp.  
When the projector is connected to these devices, only the built-in toolbar is available (single  
pen support).  
Wireless router  
or access point  
Wireless network connection with  
interactivity using the built-in toolbar  
If the projector is not connected to a network (or the network does not include a wireless  
router), you can purchase the optional wireless LAN module for the projector. This will allow  
wireless projection directly from a computer to the projector and use of the built-in interactive  
toolbar.  
You can purchase the optional wireless LAN module (part number V12H418P12)  
from an EPSON® authorized reseller. To find the nearest reseller, call 800-GO-EPSON  
3
Connecting Document Cameras  
Document cameras have several different types of ports for connecting to the projector.  
For cameras that have USB ports, such as the EPSON DC-11 and EPSON DC-06, the best  
way to connect is directly to the computer’s USB port, as shown below. This will enable full  
interactivity and dual pen support (using Easy Interactive Tools software) on the document  
camera image.  
To projector  
Although you can connect the EPSON DC-06 directly to the projector’s USB-A port using a  
USB cable, this will provide only limited interactivity (using the built-in interactive toolbar).  
For document cameras that do not have a USB port, you can connect to the projector’s VGA  
(Computer2) or HDMI port. This will allow use of the projector’s built-in interactive toolbar  
on the camera image.  
If the document camera has USB and VGA connectors, you can connect a USB cable from  
the camera to the computer and a VGA cable directly to the projector. This will provide two  
ways of connecting. The USB connection can be used when the computer is on, and the VGA  
connection can be used when the teacher wants to work with the document camera without  
turning on the computer.  
Using a Switch Box  
You can use a switch box or control box to connect various video inputs to the projector.  
However, the primary computer should always be connected directly to the projector with a  
USB cable for interactivity and another cable for video output (VGA, HDMI, or Ethernet).  
This allows maximum interactivity and dual pen support (using Easy Interactive Tools  
software) for the computer. The projector’s built-in toolbar will be available for images from  
equipment connected through the switch box.  
4
Connecting Video Equipment  
You can connect various video devices, such as DVD players, satellite/cable systems, VCRs, or  
game systems.  
Depending on the connectors available on the equipment, you can use any of the projector  
ports in the following list. The projector ports are listed in order from highest to lowest  
quality; if your equipment has multiple connectors, choose the one that provides the best  
quality image.  
HDMI  
Computer2 (with component to VGA video cable or adapter)  
S-Video  
Video (composite video)  
S-Video  
connection  
Composite Video  
connection  
Component to  
VGA connection  
HDMI connection  
The projector’s built-in toolbar can be used for annotating on the video image from any of  
these sources. However, it must be a different source from the one selected for Easy  
Interactive Function in the Extended menu, as described on page 2. The built-in toolbar  
cannot be used on the source that is selected for Easy Interactive Function.  
5
Audio Connections  
A variety of audio connections are available:  
You can connect a dynamic microphone to the Mic port and output the sound through  
the projector.  
You can also output computer audio. If you connected the computer using a VGA cable,  
you need to connect an optional 3.5 mm stereo mini-jack audio cable for sound. If you  
are using more than one audio connection, label the cables Audio1 or Audio2.  
If you connected the computer using an HDMI or Ethernet cable, you can output both  
video and audio through the cable.  
To enhance the sound from your presentation, you can connect the projector to external  
speakers with built-in amplifiers. The volume can be controlled using the projector’s  
remote control.  
If you want to output audio from the external speakers (or use the microphone) when the  
projector is turned off, you need to adjust the Standby Setup settings in the projector’s  
Extended menu. In standby mode, you can output only Computer1 or Computer2 audio or  
composite audio (red and white RCA connectors).  
Microphone  
connection  
RCA audio  
connections  
Computer1 audio  
connection  
External speaker  
connection  
Computer2 audio  
connection  
HDMI connection  
(video and audio)  
Ethernetconnection  
(video and audio)  
Installing Software  
You need to install software for use with the projector. Use the CD that came with the  
projector, labeled EPSON Projector Software for Easy Interactive Function.  
For Macs, you need to install Easy Interactive Driver and Easy Interactive Tools. For  
Windows, you only need Easy Interactive Tools.  
For Linux, the pen will function as a mouse, but Easy Interactive Tools is not supported.  
Third-party interactive software may be supported.  
For projecting over a network on a PC or Mac, you also need to install the EasyMP  
Network Projection software from the EPSON Projector Software CD.  
All software is available at epson.com/brightlinkdownloads.  
© 2012 Epson America, Inc. 3/12  
CPD-37081  
6

Trion T5200 User Manual
Toshiba Air Conditioner Rav Sm1402bt E User Manual
Sears Air Conditioner Lt103cnr User Manual
Sanyo Concealed Duct Heat Pump H 139 149 Seer User Manual
MAKITA XPH02 User Manual
LG DLGX2551 User Manual
Lexmark D01 User Manual
JVC AV 56WP94 User Manual
DELL AW2521HB User Manual
DACOR EF36LNBSS 02 User Manual